driver: ad9833
This commit is contained in:
File diff suppressed because one or more lines are too long
52
firmware/func_gen_stm32f303re_nucleo/Core/Inc/spi.h
Normal file
52
firmware/func_gen_stm32f303re_nucleo/Core/Inc/spi.h
Normal file
@@ -0,0 +1,52 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file spi.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the spi.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __SPI_H__
|
||||
#define __SPI_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
extern SPI_HandleTypeDef hspi2;
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_SPI2_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __SPI_H__ */
|
||||
|
||||
@@ -56,7 +56,7 @@
|
||||
/*#define HAL_LPTIM_MODULE_ENABLED */
|
||||
/*#define HAL_RNG_MODULE_ENABLED */
|
||||
/*#define HAL_RTC_MODULE_ENABLED */
|
||||
/*#define HAL_SPI_MODULE_ENABLED */
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
/*#define HAL_TIM_MODULE_ENABLED */
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
/*#define HAL_USART_MODULE_ENABLED */
|
||||
|
||||
@@ -18,6 +18,7 @@
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "spi.h"
|
||||
#include "usart.h"
|
||||
#include "gpio.h"
|
||||
|
||||
@@ -58,92 +59,94 @@ void SystemClock_Config(void);
|
||||
/* USER CODE END 0 */
|
||||
|
||||
/**
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
* @brief The application entry point.
|
||||
* @retval int
|
||||
*/
|
||||
int main(void)
|
||||
{
|
||||
/* USER CODE BEGIN 1 */
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
/* USER CODE END 1 */
|
||||
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
/* MCU Configuration--------------------------------------------------------*/
|
||||
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||||
HAL_Init();
|
||||
|
||||
/* USER CODE BEGIN Init */
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
/* Configure the system clock */
|
||||
SystemClock_Config();
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
/* USER CODE BEGIN SysInit */
|
||||
|
||||
/* USER CODE END SysInit */
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_USART2_UART_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
/* Initialize all configured peripherals */
|
||||
MX_GPIO_Init();
|
||||
MX_USART2_UART_Init();
|
||||
MX_SPI2_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
|
||||
/* USER CODE END 2 */
|
||||
/* USER CODE END 2 */
|
||||
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
/* Infinite loop */
|
||||
/* USER CODE BEGIN WHILE */
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
/* USER CODE BEGIN 3 */
|
||||
}
|
||||
/* USER CODE END 3 */
|
||||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
*/
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
||||
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
|
||||
RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/** Initializes the RCC Oscillators according to the specified parameters
|
||||
* in the RCC_OscInitTypeDef structure.
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
|
||||
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
|
||||
RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
/** Initializes the CPU, AHB and APB buses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART2;
|
||||
PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART2;
|
||||
PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 4 */
|
||||
@@ -151,33 +154,33 @@ void SystemClock_Config(void)
|
||||
/* USER CODE END 4 */
|
||||
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
*/
|
||||
void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line)
|
||||
{
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
121
firmware/func_gen_stm32f303re_nucleo/Core/Src/spi.c
Normal file
121
firmware/func_gen_stm32f303re_nucleo/Core/Src/spi.c
Normal file
@@ -0,0 +1,121 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file spi.c
|
||||
* @brief This file provides code for the configuration
|
||||
* of the SPI instances.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2023 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "spi.h"
|
||||
|
||||
/* USER CODE BEGIN 0 */
|
||||
|
||||
/* USER CODE END 0 */
|
||||
|
||||
SPI_HandleTypeDef hspi2;
|
||||
|
||||
/* SPI2 init function */
|
||||
void MX_SPI2_Init(void)
|
||||
{
|
||||
|
||||
/* USER CODE BEGIN SPI2_Init 0 */
|
||||
|
||||
/* USER CODE END SPI2_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN SPI2_Init 1 */
|
||||
|
||||
/* USER CODE END SPI2_Init 1 */
|
||||
hspi2.Instance = SPI2;
|
||||
hspi2.Init.Mode = SPI_MODE_MASTER;
|
||||
hspi2.Init.Direction = SPI_DIRECTION_2LINES;
|
||||
hspi2.Init.DataSize = SPI_DATASIZE_8BIT;
|
||||
hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
|
||||
hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
|
||||
hspi2.Init.NSS = SPI_NSS_SOFT;
|
||||
hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_32;
|
||||
hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||
hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||
hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||
hspi2.Init.CRCPolynomial = 7;
|
||||
hspi2.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
||||
hspi2.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
|
||||
if (HAL_SPI_Init(&hspi2) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
/* USER CODE BEGIN SPI2_Init 2 */
|
||||
|
||||
/* USER CODE END SPI2_Init 2 */
|
||||
|
||||
}
|
||||
|
||||
void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle)
|
||||
{
|
||||
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(spiHandle->Instance==SPI2)
|
||||
{
|
||||
/* USER CODE BEGIN SPI2_MspInit 0 */
|
||||
|
||||
/* USER CODE END SPI2_MspInit 0 */
|
||||
/* SPI2 clock enable */
|
||||
__HAL_RCC_SPI2_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/**SPI2 GPIO Configuration
|
||||
PB13 ------> SPI2_SCK
|
||||
PB14 ------> SPI2_MISO
|
||||
PB15 ------> SPI2_MOSI
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
/* USER CODE BEGIN SPI2_MspInit 1 */
|
||||
|
||||
/* USER CODE END SPI2_MspInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle)
|
||||
{
|
||||
|
||||
if(spiHandle->Instance==SPI2)
|
||||
{
|
||||
/* USER CODE BEGIN SPI2_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END SPI2_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_SPI2_CLK_DISABLE();
|
||||
|
||||
/**SPI2 GPIO Configuration
|
||||
PB13 ------> SPI2_SCK
|
||||
PB14 ------> SPI2_MISO
|
||||
PB15 ------> SPI2_MOSI
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
|
||||
|
||||
/* USER CODE BEGIN SPI2_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END SPI2_MspDeInit 1 */
|
||||
}
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
@@ -1,5 +1,5 @@
|
||||
##########################################################################################################################
|
||||
# File automatically-generated by tool: [projectgenerator] version: [3.17.1] date: [Sat Mar 25 17:33:18 CET 2023]
|
||||
# File automatically-generated by tool: [projectgenerator] version: [3.17.1] date: [Sat Mar 25 18:27:37 CET 2023]
|
||||
##########################################################################################################################
|
||||
|
||||
# ------------------------------------------------
|
||||
@@ -58,7 +58,16 @@ Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_flash_ex.c \
|
||||
Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c.c \
|
||||
Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_i2c_ex.c \
|
||||
Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_exti.c \
|
||||
Core/Src/system_stm32f3xx.c
|
||||
Core/Src/system_stm32f3xx.c \
|
||||
Core/Src/spi.c \
|
||||
Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_spi.c \
|
||||
Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_hal_spi_ex.c
|
||||
|
||||
######################################
|
||||
# shared libs source
|
||||
######################################
|
||||
# ad9833
|
||||
C_SOURCES += ../shared_libs/drivers/ad9833/ad9833.c
|
||||
|
||||
# ASM sources
|
||||
ASM_SOURCES = \
|
||||
@@ -121,6 +130,8 @@ C_INCLUDES = \
|
||||
-IDrivers/CMSIS/Device/ST/STM32F3xx/Include \
|
||||
-IDrivers/CMSIS/Include
|
||||
|
||||
# ad9833 includes
|
||||
C_INCLUDES += -I../shared_libs/drivers/ad9833
|
||||
|
||||
# compile gcc flags
|
||||
ASFLAGS = $(MCU) $(AS_DEFS) $(AS_INCLUDES) $(OPT) -Wall -fdata-sections -ffunction-sections
|
||||
@@ -191,4 +202,4 @@ clean:
|
||||
#######################################
|
||||
-include $(wildcard $(BUILD_DIR)/*.d)
|
||||
|
||||
# *** EOF ***
|
||||
# *** EOF ***
|
||||
|
||||
@@ -1,28 +1,33 @@
|
||||
#MicroXplorer Configuration settings - do not modify
|
||||
File.Version=6
|
||||
GPIO.groupedBy=Group By Peripherals
|
||||
KeepUserPlacement=false
|
||||
Mcu.CPN=STM32F303RET6
|
||||
Mcu.Family=STM32F3
|
||||
Mcu.IP0=NVIC
|
||||
Mcu.IP1=RCC
|
||||
Mcu.IP2=SYS
|
||||
Mcu.IP3=USART2
|
||||
Mcu.IPNb=4
|
||||
Mcu.IP2=SPI2
|
||||
Mcu.IP3=SYS
|
||||
Mcu.IP4=USART2
|
||||
Mcu.IPNb=5
|
||||
Mcu.Name=STM32F303R(D-E)Tx
|
||||
Mcu.Package=LQFP64
|
||||
Mcu.Pin0=PC13
|
||||
Mcu.Pin1=PC14-OSC32_IN
|
||||
Mcu.Pin10=PB3
|
||||
Mcu.Pin11=VP_SYS_VS_Systick
|
||||
Mcu.Pin10=PB15
|
||||
Mcu.Pin11=PA13
|
||||
Mcu.Pin12=PA14
|
||||
Mcu.Pin13=PB3
|
||||
Mcu.Pin14=VP_SYS_VS_Systick
|
||||
Mcu.Pin2=PC15-OSC32_OUT
|
||||
Mcu.Pin3=PF0-OSC_IN
|
||||
Mcu.Pin4=PF1-OSC_OUT
|
||||
Mcu.Pin5=PA2
|
||||
Mcu.Pin6=PA3
|
||||
Mcu.Pin7=PA5
|
||||
Mcu.Pin8=PA13
|
||||
Mcu.Pin9=PA14
|
||||
Mcu.PinsNb=12
|
||||
Mcu.Pin8=PB13
|
||||
Mcu.Pin9=PB14
|
||||
Mcu.PinsNb=15
|
||||
Mcu.ThirdPartyNb=0
|
||||
Mcu.UserConstants=
|
||||
Mcu.UserName=STM32F303RETx
|
||||
@@ -72,6 +77,12 @@ PA5.GPIO_PuPd=GPIO_NOPULL
|
||||
PA5.GPIO_Speed=GPIO_SPEED_FREQ_LOW
|
||||
PA5.Locked=true
|
||||
PA5.Signal=GPIO_Output
|
||||
PB13.Mode=Full_Duplex_Master
|
||||
PB13.Signal=SPI2_SCK
|
||||
PB14.Mode=Full_Duplex_Master
|
||||
PB14.Signal=SPI2_MISO
|
||||
PB15.Mode=Full_Duplex_Master
|
||||
PB15.Signal=SPI2_MOSI
|
||||
PB3.GPIOParameters=GPIO_Label
|
||||
PB3.GPIO_Label=SWO
|
||||
PB3.Locked=true
|
||||
@@ -171,6 +182,14 @@ RCC.USBFreq_Value=72000000
|
||||
RCC.VCOOutput2Freq_Value=8000000
|
||||
SH.GPXTI13.0=GPIO_EXTI13
|
||||
SH.GPXTI13.ConfNb=1
|
||||
SPI2.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_32
|
||||
SPI2.CalculateBaudRate=1.125 MBits/s
|
||||
SPI2.DataSize=SPI_DATASIZE_8BIT
|
||||
SPI2.Direction=SPI_DIRECTION_2LINES
|
||||
SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,DataSize,NSSPMode,BaudRatePrescaler
|
||||
SPI2.Mode=SPI_MODE_MASTER
|
||||
SPI2.NSSPMode=SPI_NSS_PULSE_ENABLE
|
||||
SPI2.VirtualType=VM_MASTER
|
||||
USART2.IPParameters=VirtualMode-Asynchronous
|
||||
USART2.VirtualMode-Asynchronous=VM_ASYNC
|
||||
VP_SYS_VS_Systick.Mode=SysTick
|
||||
|
||||
Reference in New Issue
Block a user