38 lines
1.7 KiB
INI
38 lines
1.7 KiB
INI
# These ini configuration items are required for probe basic.
|
|
# please compare contrast to your machine ini configuration
|
|
# and edit any matching existing items and/or add any items
|
|
# that are not under the corresponding ini sections.
|
|
|
|
[DISPLAY]
|
|
DISPLAY = probe_basic
|
|
OPEN_FILE = ~/linuxcnc/nc_files/pb_examples/blank.ngc
|
|
CONFIG_FILE = custom_config.yml
|
|
MAX_FEED_OVERRIDE = 2.000000 # Recommended Setting for Probe Basic
|
|
MAX_SPINDLE_OVERRIDE = 2.000000 # Recommended Setting for Probe Basic
|
|
MIN_SPINDLE_OVERRIDE = 0.500000 # Recommended Setting for Probe Basic
|
|
INTRO_GRAPHIC = pbsplash.png # Recommended Setting for Probe Basic
|
|
INTRO_TIME = 5 # Recommended Setting for Probe Basic
|
|
INCREMENTS = JOG .01in .001in .0001in # REQUIRED Setting for Probe Basic
|
|
GEOMETRY = xyz # REQUIRED Setting for Probe Basic
|
|
USER_TABS_PATH = user_tabs/ # REQUIRED Setting for Probe Basic
|
|
USER_BUTTONS_PATH = user_buttons/ # REQUIRED Setting for Probe Basic
|
|
USER_DROS_PATH = user_dro_display/ # REQUIRED Setting for Probe Basic
|
|
DRO_DISPLAY = xyz # REQUIRED Setting for Probe Basic, Options: xyz, xyza, xyzab, xyzac, xyzbc, user
|
|
# ATC tab display options, 0 = no atc tab displayed, 1 = Carousel atc display, 2 = rack atc display
|
|
ATC_TAB_DISPLAY = 0
|
|
#USER_ATC_BUTTONS_PATH = user_atc_buttons/
|
|
|
|
[RS274NGC]
|
|
RS274NGC_STARTUP_CODE = F10 S300 G20 G17 G40 G49 G54 G64 P.001 G80 G90 G91.1 G92.1 G94 G97 G98
|
|
PARAMETER_FILE = linuxcnc.var
|
|
OWORD_NARGS = 1
|
|
NO_DOWNCASE_OWORD = 1
|
|
SUBROUTINE_PATH = subroutines
|
|
|
|
[HAL]
|
|
HALUI = halui
|
|
POSTGUI_HALFILE = probe_basic_postgui.hal
|
|
TWOPASS = one
|
|
|
|
[TRAJ]
|
|
AXES = 3 # or number of axes of your machine |