# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR ORGANIZATION # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: \n" "POT-Creation-Date: 2022-03-19 17:59+0200\n" "PO-Revision-Date: 2019-03-25 15:08+0200\n" "Last-Translator: \n" "Language-Team: \n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "Generated-By: pygettext.py 1.5\n" "X-Generator: Poedit 3.0.1\n" "X-Poedit-Basepath: ..\n" "X-Poedit-SearchPath-0: .\n" "X-Poedit-SearchPathExcluded-0: build\n" "X-Poedit-SearchPathExcluded-1: doc\n" "X-Poedit-SearchPathExcluded-2: tests\n" "X-Poedit-SearchPathExcluded-3: venv\n" #: Bookmark.py:57 Bookmark.py:84 msgid "Title" msgstr "" #: Bookmark.py:58 Bookmark.py:89 msgid "Web Link" msgstr "" #: Bookmark.py:62 msgid "" "Index.\n" "The rows in gray color will populate the Bookmarks menu.\n" "The number of gray colored rows is set in Preferences." msgstr "" #: Bookmark.py:66 msgid "" "Description of the link that is set as an menu action.\n" "Try to keep it short because it is installed as a menu item." msgstr "" #: Bookmark.py:69 msgid "Web Link. E.g: https://your_website.org " msgstr "" #: Bookmark.py:78 msgid "New Bookmark" msgstr "" #: Bookmark.py:99 msgid "Add Entry" msgstr "" #: Bookmark.py:100 msgid "Remove Entry" msgstr "" #: Bookmark.py:101 msgid "Export List" msgstr "" #: Bookmark.py:102 msgid "Import List" msgstr "" #: Bookmark.py:192 msgid "Title entry is empty." msgstr "" #: Bookmark.py:201 msgid "Web link entry is empty." msgstr "" #: Bookmark.py:209 msgid "Either the Title or the Weblink already in the table." msgstr "" #: Bookmark.py:229 msgid "Bookmark added." msgstr "" #: Bookmark.py:245 appMain.py:3889 appMain.py:3931 msgid "Backup Site" msgstr "" #: Bookmark.py:246 msgid "This bookmark can not be removed" msgstr "" #: Bookmark.py:277 msgid "Bookmark removed." msgstr "" #: Bookmark.py:293 msgid "Export Bookmarks" msgstr "" #: Bookmark.py:295 appGUI/MainGUI.py:617 msgid "Bookmarks" msgstr "" #: Bookmark.py:302 Bookmark.py:344 appDatabase.py:2136 appDatabase.py:2182 #: appEditors/AppExcEditor.py:1417 appEditors/AppExcEditor.py:1485 #: appEditors/AppGeoEditor.py:680 appEditors/AppGeoEditor.py:1194 #: appEditors/AppGeoEditor.py:3120 appEditors/AppGeoEditor.py:3146 #: appEditors/AppGeoEditor.py:3172 appEditors/AppGeoEditor.py:5046 #: appEditors/AppGerberEditor.py:5032 appEditors/AppGerberEditor.py:7256 #: appEditors/AppTextEditor.py:265 appGUI/MainGUI.py:3493 appGUI/MainGUI.py:3722 #: appGUI/MainGUI.py:3952 appGUI/MainGUI.py:4179 appObjects/ObjectCollection.py:132 #: appPlugins/ToolCutOut.py:2063 appPlugins/ToolDistance.py:369 appPlugins/ToolFilm.py:427 #: appPlugins/ToolFilm.py:570 appPlugins/ToolImage.py:155 appPlugins/ToolLevelling.py:1591 #: appPlugins/ToolMarkers.py:735 appPlugins/ToolMarkers.py:844 appPlugins/ToolMove.py:284 #: appPlugins/ToolPcbWizard.py:224 appPlugins/ToolPcbWizard.py:247 #: appPlugins/ToolQRCode.py:616 appPlugins/ToolQRCode.py:665 #: appPlugins/ToolSolderPaste.py:888 appMain.py:1722 appMain.py:3102 appMain.py:5039 #: appMain.py:5455 appMain.py:9553 appMain.py:9591 appMain.py:9634 appMain.py:9659 #: appMain.py:9698 appMain.py:9722 appMain.py:9773 appMain.py:9811 appMain.py:9857 #: appMain.py:9899 appMain.py:9941 appMain.py:9982 appMain.py:10024 appMain.py:10069 #: appMain.py:10127 appMain.py:10159 appMain.py:10189 appMain.py:10427 appMain.py:10464 #: appMain.py:10507 appMain.py:10583 appMain.py:10641 appMain.py:10914 appMain.py:10949 msgid "Cancelled." msgstr "" #: Bookmark.py:310 appDatabase.py:2144 appEditors/AppTextEditor.py:320 #: appObjects/FlatCAMCNCJob.py:752 appObjects/FlatCAMCNCJob.py:1179 #: appPlugins/ToolFilm.py:982 appPlugins/ToolLevelling.py:1513 #: appPlugins/ToolLevelling.py:1705 appPlugins/ToolSolderPaste.py:1179 appMain.py:3110 #: appMain.py:10884 appMain.py:11092 appMain.py:11227 appMain.py:11293 appMain.py:12160 msgid "" "Permission denied, saving not possible.\n" "Most likely another app is holding the file open and not accessible." msgstr "" #: Bookmark.py:321 Bookmark.py:351 appDatabase.py:1735 appDatabase.py:2155 #: appDatabase.py:2189 appPlugins/ToolNCC.py:1221 appPlugins/ToolPaint.py:867 #: appMain.py:3121 appMain.py:6632 defaults.py:936 defaults.py:1107 msgid "Could not load the file." msgstr "" #: Bookmark.py:331 msgid "Failed to write bookmarks to file." msgstr "" #: Bookmark.py:333 msgid "Exported bookmarks to" msgstr "" #: Bookmark.py:339 msgid "Import Bookmarks" msgstr "" #: Bookmark.py:358 msgid "Imported Bookmarks from" msgstr "" #: appCommon/Common.py:49 msgid "The user requested a graceful exit of the current task." msgstr "" #: appCommon/Common.py:301 appPlugins/ToolCopperThieving.py:395 appPlugins/ToolFollow.py:229 #: appPlugins/ToolIsolation.py:1676 appPlugins/ToolNCC.py:1591 appPlugins/ToolPaint.py:1217 msgid "Click the start point of the area." msgstr "" #: appCommon/Common.py:360 appPlugins/ToolFollow.py:438 appPlugins/ToolNCC.py:1652 #: appPlugins/ToolPaint.py:1367 msgid "Click the end point of the area." msgstr "" #: appCommon/Common.py:366 appCommon/Common.py:470 appPlugins/ToolCopperThieving.py:439 #: appPlugins/ToolFollow.py:444 appPlugins/ToolFollow.py:495 #: appPlugins/ToolIsolation.py:2693 appPlugins/ToolIsolation.py:2745 #: appPlugins/ToolNCC.py:1656 appPlugins/ToolNCC.py:1708 appPlugins/ToolPaint.py:1373 #: appPlugins/ToolPaint.py:1424 msgid "Zone added. Click to start adding next zone or right click to finish." msgstr "" #: appCommon/Common.py:414 appEditors/AppGeoEditor.py:2490 #: appEditors/AppGerberEditor.py:1029 appEditors/AppGerberEditor.py:1409 #: appPlugins/ToolFollow.py:466 appPlugins/ToolIsolation.py:2716 appPlugins/ToolNCC.py:1679 #: appPlugins/ToolPaint.py:1395 msgid "Click on next Point or click right mouse button to complete ..." msgstr "" #: appCommon/Common.py:501 msgid "Exclusion areas added. Checking overlap with the object geometry ..." msgstr "" #: appCommon/Common.py:507 msgid "Failed. Exclusion areas intersects the object geometry ..." msgstr "" #: appCommon/Common.py:510 msgid "Exclusion areas added." msgstr "" #: appCommon/Common.py:519 appCommon/Common.py:654 appCommon/Common.py:716 msgid "Generate the CNC Job object." msgstr "" #: appCommon/Common.py:519 msgid "With Exclusion areas." msgstr "" #: appCommon/Common.py:554 msgid "Cancelled. Area exclusion drawing was interrupted." msgstr "" #: appCommon/Common.py:664 appCommon/Common.py:719 msgid "All exclusion zones deleted." msgstr "" #: appCommon/Common.py:705 msgid "Selected exclusion zones deleted." msgstr "" #: appDatabase.py:28 appGUI/MainGUI.py:1767 appPlugins/ToolMilling.py:4367 msgid "Path" msgstr "" #: appDatabase.py:28 appPlugins/ToolMilling.py:4367 msgid "In" msgstr "" #: appDatabase.py:28 appPlugins/ToolMilling.py:4367 msgid "Out" msgstr "" #: appDatabase.py:28 appGUI/MainGUI.py:887 appGUI/MainGUI.py:1752 #: appPlugins/ToolMilling.py:4367 appPlugins/ToolMilling.py:4375 appMain.py:9104 msgid "Custom" msgstr "" #: appDatabase.py:29 appEditors/appGCodeEditor.py:192 appObjects/FlatCAMCNCJob.py:259 #: appObjects/FlatCAMGeometry.py:125 appPlugins/ToolMilling.py:4479 msgid "Roughing" msgstr "" #: appDatabase.py:29 appEditors/appGCodeEditor.py:192 appObjects/FlatCAMCNCJob.py:259 #: appObjects/FlatCAMGeometry.py:125 appPlugins/ToolMilling.py:4479 msgid "Finishing" msgstr "" #: appDatabase.py:29 appDatabase.py:271 appDatabase.py:593 appDatabase.py:1768 #: appDatabase.py:2233 appDatabase.py:2416 appEditors/appGCodeEditor.py:192 #: appGUI/MainGUI.py:1111 appGUI/MainGUI.py:2481 appGUI/MainGUI.py:4928 #: appObjects/FlatCAMCNCJob.py:259 appObjects/FlatCAMGeometry.py:125 #: appPlugins/ToolIsolation.py:210 appPlugins/ToolIsolation.py:3300 #: appPlugins/ToolMilling.py:4479 appPlugins/ToolNCC.py:4324 msgid "Isolation" msgstr "" #: appDatabase.py:29 appEditors/appGCodeEditor.py:192 appObjects/FlatCAMCNCJob.py:259 #: appObjects/FlatCAMGeometry.py:125 appPlugins/ToolMilling.py:4479 msgid "Polishing" msgstr "" #: appDatabase.py:38 appGUI/preferences/gerber/GerberGenPrefGroupUI.py:378 msgid "ID" msgstr "" #: appDatabase.py:38 appDatabase.py:203 appEditors/AppGeoEditor.py:3479 #: appGUI/ObjectUI.py:222 appGUI/ObjectUI.py:641 appGUI/ObjectUI.py:973 #: appGUI/ObjectUI.py:1322 appGUI/ObjectUI.py:1597 appGUI/ObjectUI.py:1664 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:376 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:379 appPlugins/ToolCalibration.py:954 #: appPlugins/ToolFiducials.py:885 appMain.py:8611 msgid "Name" msgstr "" #: appDatabase.py:38 appDatabase.py:265 appPlugins/ToolCalibration.py:955 #: appPlugins/ToolDblSided.py:749 appPlugins/ToolPanelize.py:1196 appPlugins/ToolSub.py:851 #: appPlugins/ToolSub.py:919 msgid "Target" msgstr "" #: appDatabase.py:38 appDatabase.py:216 appEditors/AppExcEditor.py:2857 #: appEditors/AppExcEditor.py:4061 appGUI/ObjectUI.py:741 appObjects/FlatCAMObj.py:781 #: appObjects/FlatCAMObj.py:847 appPlugins/ToolDrilling.py:2470 #: appPlugins/ToolIsolation.py:3390 appPlugins/ToolMilling.py:4065 #: appPlugins/ToolNCC.py:4161 appPlugins/ToolPaint.py:3037 appPlugins/ToolPcbWizard.py:443 #: appPlugins/ToolReport.py:443 appPlugins/ToolReport.py:512 #: appPlugins/ToolSolderPaste.py:1268 tclCommands/TclCommandDrillcncjob.py:210 msgid "Diameter" msgstr "" #: appDatabase.py:77 msgid "Tool Description" msgstr "" #: appDatabase.py:92 msgid "Milling Parameters" msgstr "" #: appDatabase.py:105 msgid "NCC Parameters" msgstr "" #: appDatabase.py:118 msgid "Paint Parameters" msgstr "" #: appDatabase.py:131 msgid "Isolation Parameters" msgstr "" #: appDatabase.py:144 msgid "Drilling Parameters" msgstr "" #: appDatabase.py:157 msgid "Cutout Parameters" msgstr "" #: appDatabase.py:205 msgid "" "Tool name.\n" "This is not used in the app, it's function\n" "is to serve as a note for the user." msgstr "" #: appDatabase.py:218 appDatabase.py:1181 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:206 appPlugins/ToolCalculators.py:650 msgid "Tool Diameter" msgstr "" #: appDatabase.py:229 msgid "Diameter Tolerance" msgstr "" #: appDatabase.py:231 msgid "" "Tool tolerance. This tool will be used if the desired tool diameter\n" "is within the tolerance specified here." msgstr "" #: appDatabase.py:237 msgid "Min" msgstr "" #: appDatabase.py:239 msgid "Set the tool tolerance minimum." msgstr "" #: appDatabase.py:251 msgid "Max" msgstr "" #: appDatabase.py:253 msgid "Set the tool tolerance maximum." msgstr "" #: appDatabase.py:267 msgid "The kind of Application Tool where this tool is to be used." msgstr "" #: appDatabase.py:271 appDatabase.py:1765 appDatabase.py:1806 appDatabase.py:2217 #: appDatabase.py:2413 appGUI/MainGUI.py:1508 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:20 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:23 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:22 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:23 appMain.py:8609 msgid "General" msgstr "" #: appDatabase.py:271 appDatabase.py:1766 appDatabase.py:2220 appDatabase.py:2414 #: appGUI/MainGUI.py:1102 appGUI/MainGUI.py:2472 appGUI/MainGUI.py:4932 #: appGUI/ObjectUI.py:804 appGUI/ObjectUI.py:1116 appPlugins/ToolMilling.py:102 #: appPlugins/ToolMilling.py:243 appPlugins/ToolMilling.py:3935 msgid "Milling" msgstr "" #: appDatabase.py:271 appDatabase.py:1767 appDatabase.py:2225 appDatabase.py:2415 #: appGUI/MainGUI.py:1100 appGUI/MainGUI.py:2470 appGUI/ObjectUI.py:790 #: appPlugins/ToolDrilling.py:55 appPlugins/ToolDrilling.py:198 #: appPlugins/ToolDrilling.py:1198 appPlugins/ToolDrilling.py:2375 msgid "Drilling" msgstr "" #: appDatabase.py:271 appDatabase.py:1769 appDatabase.py:2241 appDatabase.py:2417 #: appEditors/AppGeoEditor.py:598 appGUI/MainGUI.py:1117 appGUI/MainGUI.py:1784 #: appGUI/MainGUI.py:2487 appGUI/ObjectUI.py:1130 appPlugins/ToolPaint.py:216 #: appPlugins/ToolPaint.py:899 appPlugins/ToolPaint.py:2919 msgid "Paint" msgstr "" #: appDatabase.py:271 appDatabase.py:1770 appDatabase.py:2249 appDatabase.py:2418 #: appGUI/MainGUI.py:1115 appGUI/MainGUI.py:2485 appGUI/ObjectUI.py:429 #: appGUI/ObjectUI.py:1140 appPlugins/ToolNCC.py:215 appPlugins/ToolNCC.py:1247 #: appPlugins/ToolNCC.py:4042 msgid "NCC" msgstr "" #: appDatabase.py:271 appDatabase.py:1771 appDatabase.py:2257 appDatabase.py:2419 #: appGUI/MainGUI.py:1122 appGUI/MainGUI.py:2492 appGUI/ObjectUI.py:400 #: appPlugins/ToolCutOut.py:188 appPlugins/ToolCutOut.py:484 appPlugins/ToolCutOut.py:2230 msgid "Cutout" msgstr "" #: appDatabase.py:285 appEditors/appGCodeEditor.py:809 appGUI/ObjectUI.py:1068 #: appGUI/ObjectUI.py:1483 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:444 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:148 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:316 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:464 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:321 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:285 appPlugins/ToolCutOut.py:2610 #: appPlugins/ToolFollow.py:757 appPlugins/ToolIsolation.py:3541 #: appPlugins/ToolIsolation.py:3893 appPlugins/ToolMilling.py:4437 #: appPlugins/ToolNCC.py:4161 appPlugins/ToolNCC.py:4597 appPlugins/ToolPaint.py:3037 #: appPlugins/ToolPaint.py:3348 msgid "Shape" msgstr "" #: appDatabase.py:287 appGUI/ObjectUI.py:1092 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:150 appPlugins/ToolIsolation.py:3543 #: appPlugins/ToolMilling.py:4439 appPlugins/ToolNCC.py:4179 appPlugins/ToolPaint.py:3055 msgid "" "Tool Shape. \n" "Can be:\n" "C1 ... C4 = circular tool with x flutes\n" "B = ball tip milling tool\n" "V = v-shape milling tool\n" "L = laser" msgstr "" #: appDatabase.py:303 msgid "V-Dia" msgstr "" #: appDatabase.py:305 msgid "" "V-Dia.\n" "Diameter of the tip for V-Shape Tools." msgstr "" #: appDatabase.py:317 msgid "V-Angle" msgstr "" #: appDatabase.py:319 msgid "" "V-Agle.\n" "Angle at the tip for the V-Shape Tools." msgstr "" #: appDatabase.py:336 appEditors/appGCodeEditor.py:809 appGUI/ObjectUI.py:1068 #: appGUI/ObjectUI.py:1483 appPlugins/ToolMilling.py:4467 msgid "Job" msgstr "" #: appDatabase.py:339 appPlugins/ToolMilling.py:4470 msgid "" "- Isolation -> informative - lower Feedrate as it uses a milling bit with a fine tip.\n" "- Roughing -> informative - lower Feedrate and multiDepth cut.\n" "- Finishing -> informative - higher Feedrate, without multiDepth.\n" "- Polish -> adds a painting sequence over the whole area of the object" msgstr "" #: appDatabase.py:354 msgid "Tool Offset" msgstr "" #: appDatabase.py:356 msgid "" "Tool Offset.\n" "Can be of a few types:\n" "Path = zero offset\n" "In = offset inside by half of tool diameter\n" "Out = offset outside by half of tool diameter\n" "Custom = custom offset using the Custom Offset value" msgstr "" #: appDatabase.py:371 msgid "Custom Offset" msgstr "" #: appDatabase.py:373 msgid "" "Custom Offset.\n" "A value to be used as offset from the current path." msgstr "" #: appDatabase.py:390 appDatabase.py:889 appEditors/appGCodeEditor.py:820 #: appGUI/ObjectUI.py:1493 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:38 #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:75 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:67 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:54 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:96 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:84 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:97 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:100 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:108 appPlugins/ToolCalculators.py:639 #: appPlugins/ToolCutOut.py:2417 appPlugins/ToolDrilling.py:2541 #: appPlugins/ToolIsolation.py:3608 appPlugins/ToolMilling.py:1455 #: appPlugins/ToolMilling.py:4583 msgid "Cut Z" msgstr "" #: appDatabase.py:392 msgid "" "Cutting Depth.\n" "The depth at which to cut into material." msgstr "" #: appDatabase.py:404 appDatabase.py:923 msgid "MultiDepth" msgstr "" #: appDatabase.py:406 msgid "" "Multi Depth.\n" "Selecting this will allow cutting in multiple passes,\n" "each pass adding a DPP parameter depth." msgstr "" #: appDatabase.py:417 appDatabase.py:939 msgid "DPP" msgstr "" #: appDatabase.py:419 appDatabase.py:941 msgid "" "DPP. Depth per Pass.\n" "The value used to cut into material on each pass." msgstr "" #: appDatabase.py:431 appDatabase.py:955 appGUI/preferences/tools/Tools2CalPrefGroupUI.py:60 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:93 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:168 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:126 appPlugins/ToolCalibration.py:794 #: appPlugins/ToolDrilling.py:1582 appPlugins/ToolDrilling.py:2583 #: appPlugins/ToolMilling.py:3629 appPlugins/ToolMilling.py:4625 #: appPlugins/ToolSolderPaste.py:1338 msgid "Travel Z" msgstr "" #: appDatabase.py:433 msgid "" "Clearance Height.\n" "Height at which the milling bit will travel between cuts,\n" "above the surface of the material, avoiding all fixtures." msgstr "" #: appDatabase.py:446 msgid "ExtraCut" msgstr "" #: appDatabase.py:448 msgid "" "Extra Cut.\n" "If checked, after a isolation is finished an extra cut\n" "will be added where the start and end of isolation meet\n" "such as that this point is covered by this extra cut to\n" "ensure a complete isolation." msgstr "" #: appDatabase.py:461 msgid "E-Cut Length" msgstr "" #: appDatabase.py:463 msgid "" "Extra Cut length.\n" "If checked, after a isolation is finished an extra cut\n" "will be added where the start and end of isolation meet\n" "such as that this point is covered by this extra cut to\n" "ensure a complete isolation. This is the length of\n" "the extra cut." msgstr "" #: appDatabase.py:484 appGUI/preferences/tools/ToolsMillPrefGroupUI.py:198 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:148 #: appPlugins/ToolMilling.py:4643 msgid "Feedrate X-Y" msgstr "" #: appDatabase.py:486 msgid "" "Feedrate X-Y. Feedrate\n" "The speed on XY plane used while cutting into material." msgstr "" #: appDatabase.py:498 appDatabase.py:978 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:154 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:213 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:161 #: appPlugins/ToolDrilling.py:2600 appPlugins/ToolMilling.py:4661 msgid "Feedrate Z" msgstr "" #: appDatabase.py:500 msgid "" "Feedrate Z\n" "The speed on Z plane." msgstr "" #: appDatabase.py:512 msgid "FR Rapids" msgstr "" #: appDatabase.py:514 msgid "" "FR Rapids. Feedrate Rapids\n" "Speed used while moving as fast as possible.\n" "This is used only by some devices that can't use\n" "the G0 g-code command. Mostly 3D printers." msgstr "" #: appDatabase.py:533 appDatabase.py:1018 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:229 appPlugins/ToolDrilling.py:1600 #: appPlugins/ToolDrilling.py:2639 appPlugins/ToolMilling.py:3647 #: appPlugins/ToolMilling.py:4731 appPlugins/ToolSolderPaste.py:1502 #: appPlugins/ToolSolderPaste.py:1539 msgid "Spindle speed" msgstr "" #: appDatabase.py:535 msgid "" "Spindle Speed.\n" "If it's left empty it will not be used.\n" "The speed of the spindle in RPM." msgstr "" #: appDatabase.py:548 appDatabase.py:1033 appPlugins/ToolDrilling.py:2670 #: appPlugins/ToolMilling.py:4762 appPlugins/ToolSolderPaste.py:1516 #: appPlugins/ToolSolderPaste.py:1553 msgid "Dwell" msgstr "" #: appDatabase.py:550 appDatabase.py:1035 msgid "" "Dwell.\n" "Check this if a delay is needed to allow\n" "the spindle motor to reach its set speed." msgstr "" #: appDatabase.py:561 appDatabase.py:1046 msgid "Dwelltime" msgstr "" #: appDatabase.py:563 appDatabase.py:1048 msgid "" "Dwell Time.\n" "A delay used to allow the motor spindle reach its set speed." msgstr "" #: appDatabase.py:583 appPlugins/ToolNCC.py:4314 msgid "Operation" msgstr "" #: appDatabase.py:585 appPlugins/ToolNCC.py:4316 msgid "" "The 'Operation' can be:\n" "- Isolation -> will ensure that the non-copper clearing is always complete.\n" "If it's not successful then the non-copper clearing will fail, too.\n" "- Clear -> the regular non-copper clearing." msgstr "" #: appDatabase.py:592 appEditors/AppGerberEditor.py:6601 appPlugins/ToolNCC.py:4323 msgid "Clear" msgstr "" #: appDatabase.py:601 appDatabase.py:842 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:55 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:203 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:578 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:136 appPlugins/ToolIsolation.py:3673 #: appPlugins/ToolMilling.py:4316 appPlugins/ToolNCC.py:4332 msgid "Milling Type" msgstr "" #: appDatabase.py:603 appDatabase.py:611 appDatabase.py:844 appDatabase.py:852 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:57 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:205 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:213 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:138 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:146 appPlugins/ToolIsolation.py:3675 #: appPlugins/ToolIsolation.py:3683 appPlugins/ToolNCC.py:4334 appPlugins/ToolNCC.py:4342 msgid "" "Milling type:\n" "- climb / best for precision milling and to reduce tool usage\n" "- conventional / useful when there is no backlash compensation" msgstr "" #: appDatabase.py:608 appDatabase.py:849 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:61 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:210 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:143 appPlugins/ToolIsolation.py:3680 #: appPlugins/ToolNCC.py:4339 msgid "Climb" msgstr "" #: appDatabase.py:609 appDatabase.py:850 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:211 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144 appPlugins/ToolIsolation.py:3681 #: appPlugins/ToolNCC.py:4340 msgid "Conventional" msgstr "" #: appDatabase.py:621 appDatabase.py:727 appDatabase.py:827 appDatabase.py:1076 #: appEditors/AppGeoEditor.py:520 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:254 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:532 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:612 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:168 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:151 appPlugins/ToolDrilling.py:2718 #: appPlugins/ToolIsolation.py:3658 appPlugins/ToolMilling.py:4397 #: appPlugins/ToolMilling.py:4500 appPlugins/ToolNCC.py:4355 appPlugins/ToolPaint.py:3172 msgid "Overlap" msgstr "" #: appDatabase.py:623 appDatabase.py:729 appEditors/AppGeoEditor.py:522 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:614 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:170 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:153 appPlugins/ToolMilling.py:4399 #: appPlugins/ToolNCC.py:4357 appPlugins/ToolPaint.py:3174 msgid "" "How much (percentage) of the tool width to overlap each tool pass.\n" "Adjust the value starting with lower values\n" "and increasing it if areas that should be processed are still \n" "not processed.\n" "Lower values = faster processing, faster execution on CNC.\n" "Higher values = slow processing and slow execution on CNC\n" "due of too many paths." msgstr "" #: appDatabase.py:642 appDatabase.py:1118 appEditors/AppGeoEditor.py:540 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:70 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:277 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:296 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:56 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:41 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:49 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:122 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:308 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:520 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:188 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:171 #: appPlugins/ToolCopperThieving.py:1343 appPlugins/ToolCopperThieving.py:1632 #: appPlugins/ToolCutOut.py:2458 appPlugins/ToolCutOut.py:2777 #: appPlugins/ToolExtract.py:1366 appPlugins/ToolFiducials.py:991 #: appPlugins/ToolInvertGerber.py:269 appPlugins/ToolInvertGerber.py:277 #: appPlugins/ToolMilling.py:4487 appPlugins/ToolNCC.py:4399 appPlugins/ToolNCC.py:4503 msgid "Margin" msgstr "" #: appDatabase.py:644 appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:72 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:58 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:123 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:136 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:522 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:190 appPlugins/ToolCopperThieving.py:1345 #: appPlugins/ToolFiducials.py:993 appPlugins/ToolMilling.py:4489 appPlugins/ToolNCC.py:4401 #: appPlugins/ToolNCC.py:4505 msgid "Bounding box margin." msgstr "" #: appDatabase.py:655 appDatabase.py:763 appEditors/AppGeoEditor.py:554 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:104 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:105 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:55 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:546 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:201 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:186 appPlugins/ToolExtract.py:1116 #: appPlugins/ToolLevelling.py:1930 appPlugins/ToolMilling.py:4515 #: appPlugins/ToolNCC.py:4376 appPlugins/ToolPaint.py:3208 #: appPlugins/ToolPunchGerber.py:2130 msgid "Method" msgstr "" #: appDatabase.py:657 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:203 #: appPlugins/ToolNCC.py:4378 msgid "" "Algorithm for copper clearing:\n" "- Standard: Fixed step inwards.\n" "- Seed-based: Outwards from seed.\n" "- Line-based: Parallel lines." msgstr "" #: appDatabase.py:665 appDatabase.py:777 appEditors/AppGeoEditor.py:568 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:556 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolMilling.py:4525 #: appPlugins/ToolNCC.py:4391 appPlugins/ToolPaint.py:3222 msgid "Standard" msgstr "" #: appDatabase.py:665 appDatabase.py:777 appEditors/AppGeoEditor.py:568 #: appEditors/AppGeoEditor.py:666 appEditors/AppGeoEditor.py:5967 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:556 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolMilling.py:4525 #: appPlugins/ToolNCC.py:4391 appPlugins/ToolPaint.py:3222 msgid "Seed" msgstr "" #: appDatabase.py:665 appDatabase.py:777 appEditors/AppGeoEditor.py:568 #: appEditors/AppGeoEditor.py:5972 appGUI/preferences/tools/ToolsMillPrefGroupUI.py:556 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appParsers/ParseGerber.py:446 #: appParsers/ParseHPGL2.py:200 appPlugins/ToolMilling.py:4525 appPlugins/ToolNCC.py:4391 #: appPlugins/ToolPaint.py:3222 msgid "Lines" msgstr "" #: appDatabase.py:665 appDatabase.py:777 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolNCC.py:4391 #: appPlugins/ToolPaint.py:3222 msgid "Combo" msgstr "" #: appDatabase.py:673 appDatabase.py:788 appEditors/AppGeoEditor.py:575 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:633 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:223 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:212 appPlugins/ToolLevelling.py:1142 #: appPlugins/ToolLevelling.py:1164 appPlugins/ToolLevelling.py:2019 #: appPlugins/ToolLevelling.py:2042 appPlugins/ToolMilling.py:4418 #: appPlugins/ToolNCC.py:4412 appPlugins/ToolNCC.py:4516 appPlugins/ToolPaint.py:3233 msgid "Connect" msgstr "" #: appDatabase.py:677 appDatabase.py:791 appEditors/AppGeoEditor.py:577 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:636 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:225 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:214 appPlugins/ToolMilling.py:4421 #: appPlugins/ToolNCC.py:4416 appPlugins/ToolNCC.py:4518 appPlugins/ToolPaint.py:3236 msgid "" "Draw lines between resulting\n" "segments to minimize tool lifts." msgstr "" #: appDatabase.py:683 appDatabase.py:795 appEditors/AppGeoEditor.py:585 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:232 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:219 appPlugins/ToolNCC.py:4422 #: appPlugins/ToolNCC.py:4524 appPlugins/ToolPaint.py:3240 msgid "Contour" msgstr "" #: appDatabase.py:687 appDatabase.py:798 appEditors/AppGeoEditor.py:587 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:234 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:221 appPlugins/ToolNCC.py:4426 #: appPlugins/ToolNCC.py:4526 appPlugins/ToolPaint.py:3243 msgid "" "Cut around the perimeter of the polygon\n" "to trim rough edges." msgstr "" #: appDatabase.py:693 appDatabase.py:748 appEditors/AppGeoEditor.py:709 #: appEditors/AppGerberEditor.py:6775 appEditors/appGCodeEditor.py:809 #: appGUI/ObjectUI.py:138 appGUI/ObjectUI.py:1068 appGUI/ObjectUI.py:1483 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:121 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:134 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:241 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:217 #: appPlugins/ToolEtchCompensation.py:474 appPlugins/ToolMarkers.py:1263 #: appPlugins/ToolMarkers.py:1290 appPlugins/ToolMarkers.py:1303 #: appPlugins/ToolMarkers.py:1544 appPlugins/ToolMarkers.py:1549 appPlugins/ToolNCC.py:4432 #: appPlugins/ToolNCC.py:4532 appPlugins/ToolPaint.py:3193 appPlugins/ToolPaint.py:3290 #: appPlugins/ToolTransform.py:577 appPlugins/ToolTransform.py:893 msgid "Offset" msgstr "" #: appDatabase.py:697 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:243 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:253 appPlugins/ToolNCC.py:4436 #: appPlugins/ToolNCC.py:4534 msgid "" "If used, it will add an offset to the copper features.\n" "The copper clearing will finish to a distance\n" "from the copper features." msgstr "" #: appDatabase.py:750 appEditors/AppGeoEditor.py:542 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:173 appPlugins/ToolPaint.py:3195 #: appPlugins/ToolPaint.py:3292 msgid "" "Distance by which to avoid\n" "the edges of the polygon to\n" "be painted." msgstr "" #: appDatabase.py:765 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:188 #: appPlugins/ToolPaint.py:3210 msgid "" "Algorithm for painting:\n" "- Standard: Fixed step inwards.\n" "- Seed-based: Outwards from seed.\n" "- Line-based: Parallel lines.\n" "- Laser-lines: Active only for Gerber objects.\n" "Will create lines that follow the traces.\n" "- Combo: In case of failure a new method will be picked from the above\n" "in the order specified." msgstr "" #: appDatabase.py:777 appDatabase.py:779 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolPaint.py:141 #: appPlugins/ToolPaint.py:415 appPlugins/ToolPaint.py:3222 appPlugins/ToolPaint.py:3224 msgid "Laser_lines" msgstr "" #: appDatabase.py:814 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:165 #: appPlugins/ToolIsolation.py:3632 msgid "Passes" msgstr "" #: appDatabase.py:816 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:167 #: appPlugins/ToolIsolation.py:3634 msgid "" "Width of the isolation gap in\n" "number (integer) of tool widths." msgstr "" #: appDatabase.py:829 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:191 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:534 appPlugins/ToolIsolation.py:3660 #: appPlugins/ToolMilling.py:4502 msgid "How much (percentage) of the tool width to overlap each tool pass." msgstr "" #: appDatabase.py:862 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:222 #: appPlugins/ToolIsolation.py:3693 msgid "Isolation Type" msgstr "" #: appDatabase.py:864 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:224 #: appPlugins/ToolIsolation.py:3695 msgid "" "Choose how the isolation will be executed:\n" "- 'Full' -> complete isolation of polygons\n" "- 'Ext' -> will isolate only on the outside\n" "- 'Int' -> will isolate only on the inside\n" "'Exterior' isolation is almost always possible\n" "(with the right tool) but 'Interior'\n" "isolation can be done only when there is an opening\n" "inside of the polygon (e.g polygon is a 'doughnut' shape)." msgstr "" #: appDatabase.py:873 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:233 appPlugins/ToolIsolation.py:3704 msgid "Full" msgstr "" #: appDatabase.py:874 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:234 #: appPlugins/ToolIsolation.py:3705 msgid "Ext" msgstr "" #: appDatabase.py:875 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:235 #: appPlugins/ToolIsolation.py:3706 msgid "Int" msgstr "" #: appDatabase.py:891 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:56 #: appPlugins/ToolDrilling.py:2543 appPlugins/ToolMilling.py:1457 msgid "" "Drill depth (negative)\n" "below the copper surface." msgstr "" #: appDatabase.py:907 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:288 #: appPlugins/ToolDrilling.py:2694 msgid "Offset Z" msgstr "" #: appDatabase.py:909 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:290 #: appPlugins/ToolDrilling.py:2696 msgid "" "Some drill bits (the larger ones) need to drill deeper\n" "to create the desired exit hole diameter due of the tip shape.\n" "The value here can compensate the Cut Z parameter." msgstr "" #: appDatabase.py:926 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:87 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:73 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:103 appPlugins/ToolCutOut.py:2434 #: appPlugins/ToolDrilling.py:2561 appPlugins/ToolMilling.py:4603 msgid "" "Use multiple passes to limit\n" "the cut depth in each pass. Will\n" "cut multiple times until Cut Z is\n" "reached." msgstr "" #: appDatabase.py:948 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:99 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:85 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:114 appPlugins/ToolCutOut.py:2445 #: appPlugins/ToolDrilling.py:2574 appPlugins/ToolMilling.py:4616 msgid "Depth of each pass (positive)." msgstr "" #: appDatabase.py:957 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:95 #: appPlugins/ToolDrilling.py:1584 appPlugins/ToolDrilling.py:2585 #: appPlugins/ToolMilling.py:3631 appPlugins/ToolMilling.py:4627 msgid "" "Tool height when travelling\n" "across the XY plane." msgstr "" #: appDatabase.py:980 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:156 #: appPlugins/ToolDrilling.py:2602 appPlugins/ToolMilling.py:4663 msgid "" "Tool speed while drilling\n" "(in units per minute).\n" "So called 'Plunge' feedrate.\n" "This is for linear move G01." msgstr "" #: appDatabase.py:995 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:322 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:326 appPlugins/ToolDrilling.py:2617 #: appPlugins/ToolMilling.py:4678 msgid "Feedrate Rapids" msgstr "" #: appDatabase.py:997 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:324 #: appPlugins/ToolDrilling.py:2619 appPlugins/ToolMilling.py:4680 msgid "" "Tool speed while drilling\n" "(in units per minute).\n" "This is for the rapid move G00.\n" "It is useful only for Marlin,\n" "ignore for any other cases." msgstr "" #: appDatabase.py:1020 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:171 #: appPlugins/ToolDrilling.py:1602 appPlugins/ToolDrilling.py:2641 #: appPlugins/ToolMilling.py:3649 appPlugins/ToolMilling.py:4733 msgid "" "Speed of the spindle\n" "in RPM (optional)" msgstr "" #: appDatabase.py:1065 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:239 #: appPlugins/ToolDrilling.py:2710 msgid "Drill slots" msgstr "" #: appDatabase.py:1067 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:241 #: appPlugins/ToolDrilling.py:2712 msgid "If the selected tool has slots then they will be drilled." msgstr "" #: appDatabase.py:1078 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:256 #: appPlugins/ToolDrilling.py:2720 msgid "How much (percentage) of the tool diameter to overlap previous drill hole." msgstr "" #: appDatabase.py:1092 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:246 #: appPlugins/ToolDrilling.py:2734 msgid "Last drill" msgstr "" #: appDatabase.py:1094 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:248 #: appPlugins/ToolDrilling.py:2736 msgid "" "If the slot length is not completely covered by drill holes,\n" "add a drill hole on the slot end point." msgstr "" #: appDatabase.py:1120 appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:298 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:124 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:310 appPlugins/ToolCutOut.py:2460 #: appPlugins/ToolCutOut.py:2779 appPlugins/ToolExtract.py:1368 msgid "" "Margin over bounds. A positive value here\n" "will make the cutout of the PCB further from\n" "the actual PCB border" msgstr "" #: appDatabase.py:1132 msgid "Gap size" msgstr "" #: appDatabase.py:1134 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:152 #: appPlugins/ToolCutOut.py:2483 msgid "" "The size of the bridge gaps in the cutout\n" "used to keep the board connected to\n" "the surrounding material (the one \n" "from which the PCB is cutout)." msgstr "" #: appDatabase.py:1143 msgid "Gap type" msgstr "" #: appDatabase.py:1145 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:169 #: appPlugins/ToolCutOut.py:2499 msgid "" "The type of gap:\n" "- Bridge -> the cutout will be interrupted by bridges\n" "- Thin -> same as 'bridge' but it will be thinner by partially milling the gap\n" "- M-Bites -> 'Mouse Bites' - same as 'bridge' but covered with drill holes" msgstr "" #: appDatabase.py:1153 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:176 #: appPlugins/ToolCutOut.py:2514 appPlugins/ToolCutOut.py:2565 msgid "Bridge" msgstr "" #: appDatabase.py:1154 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:176 #: appPlugins/ToolCutOut.py:2514 msgid "Thin" msgstr "" #: appDatabase.py:1165 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:187 #: appPlugins/ToolCutOut.py:2520 msgid "Depth" msgstr "" #: appDatabase.py:1167 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:189 #: appPlugins/ToolCutOut.py:2522 msgid "" "The depth until the milling is done\n" "in order to thin the gaps." msgstr "" #: appDatabase.py:1183 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:208 #: appPlugins/ToolCutOut.py:2536 msgid "The drill hole diameter when doing mouse bites." msgstr "" #: appDatabase.py:1194 appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:169 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:208 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:247 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:218 #: appPlugins/ToolCopperThieving.py:1487 appPlugins/ToolCopperThieving.py:1533 #: appPlugins/ToolCopperThieving.py:1579 appPlugins/ToolCutOut.py:2546 msgid "Spacing" msgstr "" #: appDatabase.py:1196 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:220 #: appPlugins/ToolCutOut.py:2548 msgid "The spacing between drill holes when doing mouse bites." msgstr "" #: appDatabase.py:1215 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:59 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:213 appPlugins/ToolCutOut.py:2403 #: appPlugins/ToolFilm.py:1551 msgid "Convex Shape" msgstr "" #: appDatabase.py:1218 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:61 #: appPlugins/ToolCutOut.py:2405 appPlugins/ToolCutOut.py:2410 msgid "" "Create a convex shape surrounding the entire PCB.\n" "Used only if the source object type is Gerber." msgstr "" #: appDatabase.py:1226 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:137 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:234 appPlugins/ToolCutOut.py:2467 #: appPlugins/ToolCutOut.py:2586 appPlugins/ToolCutOut.py:2685 msgid "Gaps" msgstr "" #: appDatabase.py:1228 appPlugins/ToolCutOut.py:2588 msgid "" "Number of gaps used for the Automatic cutout.\n" "There can be maximum 8 bridges/gaps.\n" "The choices are:\n" "- None - no gaps\n" "- lr - left + right\n" "- tb - top + bottom\n" "- 4 - left + right +top + bottom\n" "- 2lr - 2*left + 2*right\n" "- 2tb - 2*top + 2*bottom\n" "- 8 - 2*left + 2*right +2*top + 2*bottom" msgstr "" #: appDatabase.py:1265 msgid "Add Tool in DB" msgstr "" #: appDatabase.py:1268 msgid "" "Add a new tool in the Tools Database.\n" "It will be used in the Geometry UI.\n" "You can edit it after it is added." msgstr "" #: appDatabase.py:1282 msgid "Delete Tool from DB" msgstr "" #: appDatabase.py:1285 msgid "Remove a selection of tools in the Tools Database." msgstr "" #: appDatabase.py:1289 msgid "Export DB" msgstr "" #: appDatabase.py:1292 msgid "Save the Tools Database to a custom text file." msgstr "" #: appDatabase.py:1296 msgid "Import DB" msgstr "" #: appDatabase.py:1299 msgid "Load the Tools Database information's from a custom text file." msgstr "" #: appDatabase.py:1303 msgid "Save DB" msgstr "" #: appDatabase.py:1306 msgid "Save the Tools Database information's." msgstr "" #: appDatabase.py:1310 msgid "Transfer the Tool" msgstr "" #: appDatabase.py:1312 msgid "" "Insert a new tool in the Tools Table of the\n" "object/application tool after selecting a tool\n" "in the Tools Database." msgstr "" #: appDatabase.py:1325 appEditors/AppTextEditor.py:351 appGUI/GUIElements.py:2717 #: appGUI/GUIElements.py:2787 appGUI/GUIElements.py:2848 appGUI/GUIElements.py:2913 #: appGUI/GUIElements.py:4307 appGUI/MainGUI.py:1667 #: appGUI/preferences/PreferencesUIManager.py:1078 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:418 appMain.py:2755 appMain.py:4022 #: appMain.py:4987 appMain.py:5246 appMain.py:10218 msgid "Cancel" msgstr "" #: appDatabase.py:1338 appDatabase.py:1349 appEditors/AppExcEditor.py:4577 #: appEditors/AppExcEditor.py:4588 appEditors/appGCodeEditor.py:903 #: appEditors/appGCodeEditor.py:914 appGUI/ObjectUI.py:158 appGUI/ObjectUI.py:169 #: appPlugins/ToolAlignObjects.py:573 appPlugins/ToolAlignObjects.py:584 #: appPlugins/ToolCalculators.py:1071 appPlugins/ToolCalculators.py:1082 #: appPlugins/ToolCalibration.py:1420 appPlugins/ToolCalibration.py:1431 #: appPlugins/ToolCopperThieving.py:1810 appPlugins/ToolCopperThieving.py:1821 #: appPlugins/ToolCutOut.py:2848 appPlugins/ToolCutOut.py:2859 #: appPlugins/ToolDblSided.py:1180 appPlugins/ToolDblSided.py:1191 #: appPlugins/ToolDistance.py:847 appPlugins/ToolDistance.py:858 #: appPlugins/ToolDrilling.py:3060 appPlugins/ToolDrilling.py:3071 #: appPlugins/ToolEtchCompensation.py:531 appPlugins/ToolEtchCompensation.py:542 #: appPlugins/ToolExtract.py:1436 appPlugins/ToolExtract.py:1447 #: appPlugins/ToolFiducials.py:1136 appPlugins/ToolFiducials.py:1147 #: appPlugins/ToolFilm.py:1892 appPlugins/ToolFilm.py:1903 appPlugins/ToolFollow.py:812 #: appPlugins/ToolFollow.py:823 appPlugins/ToolImage.py:467 appPlugins/ToolImage.py:478 #: appPlugins/ToolInvertGerber.py:338 appPlugins/ToolInvertGerber.py:349 #: appPlugins/ToolIsolation.py:3962 appPlugins/ToolIsolation.py:3973 #: appPlugins/ToolLevelling.py:2371 appPlugins/ToolLevelling.py:2382 #: appPlugins/ToolMarkers.py:1559 appPlugins/ToolMarkers.py:1570 #: appPlugins/ToolMilling.py:5125 appPlugins/ToolMilling.py:5136 appPlugins/ToolNCC.py:4760 #: appPlugins/ToolNCC.py:4771 appPlugins/ToolObjectDistance.py:642 #: appPlugins/ToolObjectDistance.py:653 appPlugins/ToolOptimal.py:737 #: appPlugins/ToolOptimal.py:748 appPlugins/ToolPaint.py:3454 appPlugins/ToolPaint.py:3465 #: appPlugins/ToolPanelize.py:1473 appPlugins/ToolPanelize.py:1484 #: appPlugins/ToolPcbWizard.py:532 appPlugins/ToolPcbWizard.py:543 #: appPlugins/ToolPunchGerber.py:2397 appPlugins/ToolPunchGerber.py:2408 #: appPlugins/ToolQRCode.py:1048 appPlugins/ToolQRCode.py:1059 #: appPlugins/ToolRulesCheck.py:1881 appPlugins/ToolRulesCheck.py:1892 #: appPlugins/ToolSolderPaste.py:1714 appPlugins/ToolSolderPaste.py:1725 #: appPlugins/ToolSub.py:995 appPlugins/ToolSub.py:1006 appPlugins/ToolTransform.py:1071 #: appPlugins/ToolTransform.py:1082 appTool.py:312 appTool.py:323 msgid "Edited value is out of range" msgstr "" #: appDatabase.py:1344 appDatabase.py:1351 appEditors/AppExcEditor.py:4583 #: appEditors/AppExcEditor.py:4590 appEditors/appGCodeEditor.py:909 #: appEditors/appGCodeEditor.py:916 appGUI/ObjectUI.py:164 appGUI/ObjectUI.py:171 #: appPlugins/ToolAlignObjects.py:579 appPlugins/ToolAlignObjects.py:586 #: appPlugins/ToolCalculators.py:1077 appPlugins/ToolCalculators.py:1084 #: appPlugins/ToolCalibration.py:1426 appPlugins/ToolCalibration.py:1433 #: appPlugins/ToolCopperThieving.py:1816 appPlugins/ToolCopperThieving.py:1823 #: appPlugins/ToolCutOut.py:2854 appPlugins/ToolCutOut.py:2861 #: appPlugins/ToolDblSided.py:1186 appPlugins/ToolDblSided.py:1193 #: appPlugins/ToolDistance.py:853 appPlugins/ToolDistance.py:860 #: appPlugins/ToolDrilling.py:3066 appPlugins/ToolDrilling.py:3073 #: appPlugins/ToolEtchCompensation.py:537 appPlugins/ToolEtchCompensation.py:544 #: appPlugins/ToolExtract.py:1442 appPlugins/ToolExtract.py:1449 #: appPlugins/ToolFiducials.py:1142 appPlugins/ToolFiducials.py:1149 #: appPlugins/ToolFilm.py:1898 appPlugins/ToolFilm.py:1905 appPlugins/ToolFollow.py:818 #: appPlugins/ToolFollow.py:825 appPlugins/ToolImage.py:473 appPlugins/ToolImage.py:480 #: appPlugins/ToolInvertGerber.py:344 appPlugins/ToolInvertGerber.py:351 #: appPlugins/ToolIsolation.py:3968 appPlugins/ToolIsolation.py:3975 #: appPlugins/ToolLevelling.py:2377 appPlugins/ToolLevelling.py:2384 #: appPlugins/ToolMarkers.py:1565 appPlugins/ToolMarkers.py:1572 #: appPlugins/ToolMilling.py:5131 appPlugins/ToolMilling.py:5138 appPlugins/ToolNCC.py:4766 #: appPlugins/ToolNCC.py:4773 appPlugins/ToolObjectDistance.py:648 #: appPlugins/ToolObjectDistance.py:655 appPlugins/ToolOptimal.py:743 #: appPlugins/ToolOptimal.py:750 appPlugins/ToolPaint.py:3460 appPlugins/ToolPaint.py:3467 #: appPlugins/ToolPanelize.py:1479 appPlugins/ToolPanelize.py:1486 #: appPlugins/ToolPcbWizard.py:538 appPlugins/ToolPcbWizard.py:545 #: appPlugins/ToolPunchGerber.py:2403 appPlugins/ToolPunchGerber.py:2410 #: appPlugins/ToolQRCode.py:1054 appPlugins/ToolQRCode.py:1061 #: appPlugins/ToolRulesCheck.py:1887 appPlugins/ToolRulesCheck.py:1894 #: appPlugins/ToolSolderPaste.py:1720 appPlugins/ToolSolderPaste.py:1727 #: appPlugins/ToolSub.py:1001 appPlugins/ToolSub.py:1008 appPlugins/ToolTransform.py:1077 #: appPlugins/ToolTransform.py:1084 appTool.py:318 appTool.py:325 msgid "Edited value is within limits." msgstr "" #: appDatabase.py:1600 msgid "Sort by Target" msgstr "" #: appDatabase.py:1604 msgid "Sort by Diameter" msgstr "" #: appDatabase.py:1609 msgid "Add to DB" msgstr "" #: appDatabase.py:1612 msgid "Copy from DB" msgstr "" #: appDatabase.py:1615 msgid "Delete from DB" msgstr "" #: appDatabase.py:1620 appTranslation.py:216 appMain.py:4010 appMain.py:10206 msgid "Save changes" msgstr "" #: appDatabase.py:1724 appDatabase.py:2211 appDatabase.py:2663 appDatabase.py:2675 #: appGUI/MainGUI.py:501 appPlugins/ToolCutOut.py:575 appPlugins/ToolCutOut.py:596 #: appPlugins/ToolCutOut.py:633 appPlugins/ToolIsolation.py:2934 #: appPlugins/ToolIsolation.py:2944 appPlugins/ToolIsolation.py:3024 #: appPlugins/ToolMilling.py:2271 appPlugins/ToolNCC.py:3939 appPlugins/ToolNCC.py:3949 #: appPlugins/ToolNCC.py:4025 appPlugins/ToolPaint.py:2807 appPlugins/ToolPaint.py:2817 #: appPlugins/ToolPaint.py:2902 appMain.py:6636 appMain.py:6673 appMain.py:6760 #: appMain.py:6772 appMain.py:6781 appMain.py:6791 msgid "Tools Database" msgstr "" #: appDatabase.py:1743 appDatabase.py:2197 appPlugins/ToolCutOut.py:470 #: appPlugins/ToolDrilling.py:1170 appPlugins/ToolIsolation.py:1375 #: appPlugins/ToolMilling.py:2112 appPlugins/ToolNCC.py:1232 appPlugins/ToolPaint.py:878 msgid "Failed to parse Tools DB file." msgstr "" #: appDatabase.py:1746 appDatabase.py:2200 msgid "Loaded Tools DB from" msgstr "" #: appDatabase.py:2047 msgid "Tool added to DB." msgstr "" #: appDatabase.py:2080 msgid "Tool copied from Tools DB." msgstr "" #: appDatabase.py:2114 msgid "Tool removed from Tools DB." msgstr "" #: appDatabase.py:2127 msgid "Export Tools Database" msgstr "" #: appDatabase.py:2129 msgid "Tools_Database" msgstr "" #: appDatabase.py:2166 appDatabase.py:2169 appDatabase.py:2272 msgid "Failed to write Tools DB to file." msgstr "" #: appDatabase.py:2172 msgid "Exported Tools DB to" msgstr "" #: appDatabase.py:2179 msgid "Import FlatCAM Tools DB" msgstr "" #: appDatabase.py:2276 msgid "Saved Tools DB." msgstr "" #: appDatabase.py:2483 msgid "To change tool properties select only one tool. Tools currently selected" msgstr "" #: appDatabase.py:2639 msgid "No Tool/row selected in the Tools Database table" msgstr "" #: appDatabase.py:2643 appPlugins/ToolDrilling.py:1174 msgid "Tools DB empty." msgstr "" #: appDatabase.py:2670 msgid "Tools in Tools Database edited but not saved." msgstr "" #: appDatabase.py:2679 msgid "Cancelled adding tool from DB." msgstr "" #: appEditors/AppExcEditor.py:235 appEditors/AppExcEditor.py:259 #: appEditors/AppExcEditor.py:355 appEditors/AppExcEditor.py:657 #: appEditors/AppExcEditor.py:872 appEditors/AppExcEditor.py:3869 #: appEditors/AppExcEditor.py:3880 appEditors/AppGerberEditor.py:248 #: appEditors/AppGerberEditor.py:255 msgid "Click to place ..." msgstr "" #: appEditors/AppExcEditor.py:243 msgid "To add a drill first select a tool" msgstr "" #: appEditors/AppExcEditor.py:309 appEditors/AppExcEditor.py:601 #: appEditors/AppExcEditor.py:830 appEditors/AppExcEditor.py:1242 #: appEditors/AppExcEditor.py:1505 appEditors/AppExcEditor.py:1608 #: appEditors/AppExcEditor.py:1723 appEditors/AppExcEditor.py:2527 #: appEditors/AppExcEditor.py:3343 appEditors/AppExcEditor.py:3350 #: appEditors/AppExcEditor.py:3800 appEditors/AppGeoEditor.py:1407 #: appEditors/AppGeoEditor.py:1538 appEditors/AppGeoEditor.py:1540 #: appEditors/AppGeoEditor.py:1596 appEditors/AppGeoEditor.py:2130 #: appEditors/AppGeoEditor.py:2370 appEditors/AppGeoEditor.py:2445 #: appEditors/AppGeoEditor.py:2524 appEditors/AppGeoEditor.py:2582 #: appEditors/AppGeoEditor.py:2787 appEditors/AppGeoEditor.py:2866 #: appEditors/AppGeoEditor.py:2999 appEditors/AppGeoEditor.py:3072 #: appEditors/AppGeoEditor.py:3142 appEditors/AppGeoEditor.py:3168 #: appEditors/AppGeoEditor.py:3196 appEditors/AppGeoEditor.py:3312 #: appEditors/AppGeoEditor.py:4869 appEditors/AppGeoEditor.py:4883 #: appEditors/AppGeoEditor.py:5491 appEditors/AppGeoEditor.py:5544 #: appEditors/AppGeoEditor.py:5607 appEditors/AppGeoEditor.py:5633 #: appEditors/AppGeoEditor.py:5658 appEditors/AppGeoEditor.py:5690 #: appEditors/AppGeoEditor.py:5770 appEditors/AppGeoEditor.py:5836 #: appEditors/AppGeoEditor.py:5904 appEditors/AppGeoEditor.py:6001 #: appEditors/AppGerberEditor.py:390 appEditors/AppGerberEditor.py:814 #: appEditors/AppGerberEditor.py:941 appEditors/AppGerberEditor.py:1253 #: appEditors/AppGerberEditor.py:1514 appEditors/AppGerberEditor.py:1724 #: appEditors/AppGerberEditor.py:2014 appEditors/AppGerberEditor.py:2310 #: appEditors/AppGerberEditor.py:2391 appEditors/AppGerberEditor.py:2538 #: appEditors/AppGerberEditor.py:3251 appEditors/AppGerberEditor.py:5016 #: appEditors/AppGerberEditor.py:5321 appEditors/AppGerberEditor.py:5339 #: appEditors/AppGerberEditor.py:5789 appEditors/AppGerberEditor.py:5972 #: appEditors/AppGerberEditor.py:6034 appEditors/AppGerberEditor.py:6081 #: appEditors/AppGerberEditor.py:7479 appEditors/AppGerberEditor.py:7641 #: appEditors/AppGerberEditor.py:7643 appEditors/AppGerberEditor.py:7714 #: appGUI/MainGUI.py:3474 appGUI/MainGUI.py:3486 appObjects/FlatCAMGeometry.py:534 #: appObjects/FlatCAMGeometry.py:1220 appObjects/FlatCAMGeometry.py:1299 #: appObjects/FlatCAMGerber.py:427 appParsers/ParseGerber.py:2205 #: appParsers/ParseGerber.py:2299 appParsers/ParseGerber.py:2374 #: appParsers/ParseGerber.py:2448 appParsers/ParseGerber.py:2510 #: appPlugins/ToolAlignObjects.py:289 appPlugins/ToolAlignObjects.py:311 #: appPlugins/ToolCalculators.py:335 appPlugins/ToolCalculators.py:345 #: appPlugins/ToolCalibration.py:329 appPlugins/ToolCutOut.py:1511 #: appPlugins/ToolDistance.py:321 appPlugins/ToolDistance.py:374 #: appPlugins/ToolDistance.py:411 appPlugins/ToolFiducials.py:652 #: appPlugins/ToolFiducials.py:667 appPlugins/ToolFollow.py:338 appPlugins/ToolFollow.py:406 #: appPlugins/ToolIsolation.py:1624 appPlugins/ToolMarkers.py:998 appPlugins/ToolMove.py:251 #: appPlugins/ToolObjectDistance.py:440 appPlugins/ToolPaint.py:2335 #: appPlugins/ToolPanelize.py:1110 appPlugins/ToolSolderPaste.py:892 appMain.py:5756 #: appMain.py:5881 tclCommands/TclCommandPanelize.py:430 #: tclCommands/TclCommandPanelize.py:440 tclCommands/TclCommandSetOrigin.py:113 msgid "Done." msgstr "" #: appEditors/AppExcEditor.py:363 msgid "To add an Drill Array first select a tool in Tool Table" msgstr "" #: appEditors/AppExcEditor.py:379 appEditors/AppExcEditor.py:686 #: appEditors/AppExcEditor.py:919 appEditors/AppExcEditor.py:1576 #: appEditors/AppGerberEditor.py:481 appEditors/AppGerberEditor.py:2192 #: appEditors/AppGerberEditor.py:2222 appGUI/MainGUI.py:4104 msgid "Click on target location ..." msgstr "" #: appEditors/AppExcEditor.py:398 msgid "Click on the Drill Circular Array Start position" msgstr "" #: appEditors/AppExcEditor.py:420 appEditors/AppExcEditor.py:960 #: appEditors/AppGerberEditor.py:535 msgid "The value is not Float. Check for comma instead of dot separator." msgstr "" #: appEditors/AppExcEditor.py:424 msgid "The value is mistyped. Check the value" msgstr "" #: appEditors/AppExcEditor.py:582 appEditors/AppExcEditor.py:1204 #: appEditors/AppGerberEditor.py:796 msgid "Too many items for the selected spacing angle." msgstr "" #: appEditors/AppExcEditor.py:588 appEditors/AppExcEditor.py:1229 #: appEditors/AppGerberEditor.py:801 appEditors/AppGerberEditor.py:3925 #: appEditors/AppGerberEditor.py:5968 appObjects/FlatCAMCNCJob.py:832 #: appPlugins/ToolCopperThieving.py:354 appPlugins/ToolCopperThieving.py:949 #: appPlugins/ToolCopperThieving.py:1161 appPlugins/ToolCutOut.py:865 #: appPlugins/ToolCutOut.py:888 appPlugins/ToolCutOut.py:1020 appPlugins/ToolCutOut.py:1177 #: appPlugins/ToolCutOut.py:1328 appPlugins/ToolCutOut.py:1447 appPlugins/ToolCutOut.py:1465 #: appPlugins/ToolCutOut.py:1479 appPlugins/ToolDblSided.py:600 #: appPlugins/ToolDblSided.py:613 appPlugins/ToolDrilling.py:2035 #: appPlugins/ToolExtract.py:401 appPlugins/ToolExtract.py:767 appPlugins/ToolExtract.py:816 #: appPlugins/ToolExtract.py:825 appPlugins/ToolExtract.py:829 #: appPlugins/ToolFiducials.py:344 appPlugins/ToolFiducials.py:605 #: appPlugins/ToolFiducials.py:661 appPlugins/ToolFiducials.py:676 #: appPlugins/ToolFilm.py:1028 appPlugins/ToolIsolation.py:1529 #: appPlugins/ToolMarkers.py:341 appPlugins/ToolMarkers.py:364 appPlugins/ToolMarkers.py:834 #: appPlugins/ToolMarkers.py:950 appPlugins/ToolMarkers.py:959 appPlugins/ToolMarkers.py:996 #: appPlugins/ToolMove.py:202 appPlugins/ToolPaint.py:2329 appPlugins/ToolSolderPaste.py:793 #: appMain.py:5290 appMain.py:5900 appMain.py:9171 appMain.py:10735 appMain.py:12027 #: appMain.py:12041 appMain.py:12051 appMain.py:12068 camlib.py:1225 camlib.py:2464 #: camlib.py:2537 camlib.py:2605 camlib.py:2677 camlib.py:2680 camlib.py:5544 camlib.py:5963 msgid "Failed." msgstr "" #: appEditors/AppExcEditor.py:665 msgid "To add a slot first select a tool" msgstr "" #: appEditors/AppExcEditor.py:725 appEditors/AppExcEditor.py:732 #: appEditors/AppExcEditor.py:1087 appEditors/AppExcEditor.py:1094 msgid "Value is missing or wrong format. Add it and retry." msgstr "" #: appEditors/AppExcEditor.py:880 msgid "To add an Slot Array first select a tool in Tool Table" msgstr "" #: appEditors/AppExcEditor.py:938 msgid "Click on the Slot Circular Array Start position" msgstr "" #: appEditors/AppExcEditor.py:963 appEditors/AppGerberEditor.py:538 msgid "The value is mistyped. Check the value." msgstr "" #: appEditors/AppExcEditor.py:1298 msgid "Click on the Drill(s) to resize ..." msgstr "" #: appEditors/AppExcEditor.py:1328 msgid "Resize drill(s) failed. Please enter a diameter for resize." msgstr "" #: appEditors/AppExcEditor.py:1507 appEditors/AppExcEditor.py:1560 #: appEditors/AppExcEditor.py:1571 appGUI/MainGUI.py:3738 appGUI/MainGUI.py:3823 #: appGUI/MainGUI.py:3869 appGUI/MainGUI.py:3966 appGUI/MainGUI.py:4081 #: appGUI/MainGUI.py:4110 msgid "Cancelled. Nothing selected." msgstr "" #: appEditors/AppExcEditor.py:1564 appEditors/AppGeoEditor.py:2821 #: appEditors/AppGeoEditor.py:2841 appEditors/AppGerberEditor.py:2194 msgid "Click on reference location ..." msgstr "" #: appEditors/AppExcEditor.py:1924 appEditors/AppGeoEditor.py:4190 #: appEditors/AppGerberEditor.py:3505 appEditors/AppGerberEditor.py:6297 #: appEditors/AppGerberEditor.py:6594 appGUI/GUIElements.py:469 appGUI/GUIElements.py:1224 #: appGUI/GUIElements.py:1628 appGUI/GUIElements.py:1884 appGUI/GUIElements.py:2170 #: appGUI/GUIElements.py:4360 appGUI/MainGUI.py:428 appGUI/MainGUI.py:768 #: appGUI/MainGUI.py:827 appGUI/MainGUI.py:907 appGUI/MainGUI.py:1050 appGUI/MainGUI.py:1300 #: appGUI/MainGUI.py:1857 appGUI/MainGUI.py:2422 appGUI/MainGUI.py:2664 #: appGUI/MainGUI.py:5408 appGUI/preferences/gerber/GerberGenPrefGroupUI.py:396 #: appPlugins/ToolDrilling.py:313 appPlugins/ToolIsolation.py:231 #: appPlugins/ToolMilling.py:431 appPlugins/ToolMilling.py:443 appPlugins/ToolNCC.py:233 #: appPlugins/ToolPaint.py:230 appPlugins/ToolSolderPaste.py:139 appMain.py:7232 msgid "Delete" msgstr "" #: appEditors/AppExcEditor.py:2153 appObjects/FlatCAMExcellon.py:385 #: appPlugins/ToolDrilling.py:772 appPlugins/ToolMilling.py:1210 #: appPlugins/ToolMilling.py:4090 msgid "Total Drills" msgstr "" #: appEditors/AppExcEditor.py:2185 appObjects/FlatCAMExcellon.py:419 #: appPlugins/ToolDrilling.py:799 appPlugins/ToolMilling.py:1237 #: appPlugins/ToolMilling.py:4114 msgid "Total Slots" msgstr "" #: appEditors/AppExcEditor.py:2263 appEditors/AppGeoEditor.py:4089 #: appEditors/AppGerberEditor.py:4275 appEditors/appGCodeEditor.py:606 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:184 appObjects/FlatCAMCNCJob.py:581 #: appObjects/FlatCAMDocument.py:193 appObjects/FlatCAMExcellon.py:219 #: appObjects/FlatCAMGeometry.py:449 appObjects/FlatCAMGerber.py:226 #: appObjects/FlatCAMScript.py:177 appPlugins/ToolCutOut.py:307 #: appPlugins/ToolDblSided.py:224 appPlugins/ToolDrilling.py:561 #: appPlugins/ToolFiducials.py:211 appPlugins/ToolFilm.py:275 appPlugins/ToolFollow.py:179 #: appPlugins/ToolIsolation.py:469 appPlugins/ToolLevelling.py:404 #: appPlugins/ToolMarkers.py:231 appPlugins/ToolMilling.py:716 appPlugins/ToolNCC.py:422 #: appPlugins/ToolPaint.py:445 appPlugins/ToolPanelize.py:285 #: appPlugins/ToolPunchGerber.py:391 appPlugins/ToolQRCode.py:202 appPlugins/ToolSub.py:239 msgid "Beginner" msgstr "" #: appEditors/AppExcEditor.py:2274 appEditors/AppGeoEditor.py:4102 #: appEditors/AppGerberEditor.py:4288 appEditors/appGCodeEditor.py:619 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:185 appObjects/FlatCAMCNCJob.py:591 #: appObjects/FlatCAMDocument.py:202 appObjects/FlatCAMExcellon.py:236 #: appObjects/FlatCAMGeometry.py:458 appObjects/FlatCAMGerber.py:241 #: appObjects/FlatCAMScript.py:186 appPlugins/ToolCutOut.py:343 #: appPlugins/ToolDblSided.py:238 appPlugins/ToolDrilling.py:604 #: appPlugins/ToolFiducials.py:226 appPlugins/ToolFilm.py:292 appPlugins/ToolFollow.py:191 #: appPlugins/ToolIsolation.py:526 appPlugins/ToolLevelling.py:419 #: appPlugins/ToolMarkers.py:249 appPlugins/ToolMilling.py:777 appPlugins/ToolNCC.py:460 #: appPlugins/ToolPaint.py:470 appPlugins/ToolPanelize.py:297 #: appPlugins/ToolPunchGerber.py:403 appPlugins/ToolQRCode.py:216 appPlugins/ToolSub.py:250 msgid "Advanced" msgstr "" #: appEditors/AppExcEditor.py:2297 appObjects/FlatCAMGeometry.py:710 #: appObjects/FlatCAMGeometry.py:1369 appPlugins/ToolDrilling.py:1800 #: appPlugins/ToolIsolation.py:1517 appPlugins/ToolIsolation.py:1985 #: appPlugins/ToolMilling.py:2344 appPlugins/ToolMilling.py:3124 #: appPlugins/ToolMilling.py:3897 appPlugins/ToolNCC.py:1421 appPlugins/ToolNCC.py:1559 #: appPlugins/ToolPaint.py:1044 appPlugins/ToolPaint.py:1182 appPlugins/ToolPaint.py:1891 #: appPlugins/ToolSolderPaste.py:518 appPlugins/ToolSolderPaste.py:591 msgid "Wrong value format entered, use a number." msgstr "" #: appEditors/AppExcEditor.py:2308 msgid "" "Tool already in the original or actual tool list.\n" "Save and reedit Excellon if you need to add this tool. " msgstr "" #: appEditors/AppExcEditor.py:2316 appGUI/MainGUI.py:4146 msgid "Added new tool with dia" msgstr "" #: appEditors/AppExcEditor.py:2350 msgid "Select a tool in Tool Table" msgstr "" #: appEditors/AppExcEditor.py:2380 msgid "Deleted tool with diameter" msgstr "" #: appEditors/AppExcEditor.py:3134 msgid "There are no Tools definitions in the file. Aborting Excellon creation." msgstr "" #: appEditors/AppExcEditor.py:3138 appEditors/AppGerberEditor.py:4996 #: appObjects/AppObject.py:170 appObjects/FlatCAMGeometry.py:652 #: appParsers/ParseExcellon.py:976 appPlugins/ToolMilling.py:3061 #: appPlugins/ToolPcbWizard.py:354 appPlugins/ToolSolderPaste.py:973 appMain.py:6716 #: appMain.py:8758 appMain.py:11475 appMain.py:11546 appMain.py:11682 appMain.py:11747 msgid "An internal error has occurred. See shell.\n" msgstr "" #: appEditors/AppExcEditor.py:3143 appObjects/FlatCAMGeometry.py:957 #: appObjects/FlatCAMGeometry.py:962 appObjects/FlatCAMGeometry.py:1120 #: appPlugins/ToolMilling.py:3527 appPlugins/ToolMilling.py:3531 appPlugins/ToolSub.py:480 #: appPlugins/ToolSub.py:674 msgid "Generating" msgstr "" #: appEditors/AppExcEditor.py:3165 msgid "Excellon editing finished." msgstr "" #: appEditors/AppExcEditor.py:3181 msgid "Cancelled. There is no Tool/Drill selected" msgstr "" #: appEditors/AppExcEditor.py:3874 appEditors/AppExcEditor.py:3885 #: appEditors/AppGerberEditor.py:5875 msgid "Click on the circular array Center position" msgstr "" #: appEditors/AppExcEditor.py:4018 appGUI/MainGUI.py:740 appGUI/ObjectUI.py:650 msgid "Excellon Editor" msgstr "" #: appEditors/AppExcEditor.py:4028 appEditors/AppGeoEditor.py:3446 #: appEditors/AppGerberEditor.py:6144 appEditors/appGCodeEditor.py:779 appGUI/ObjectUI.py:72 #: appPlugins/ToolCutOut.py:2267 appPlugins/ToolDblSided.py:725 #: appPlugins/ToolDrilling.py:2411 appPlugins/ToolFiducials.py:832 #: appPlugins/ToolFilm.py:1266 appPlugins/ToolFollow.py:703 appPlugins/ToolIsolation.py:3337 #: appPlugins/ToolLevelling.py:1772 appPlugins/ToolMarkers.py:1167 #: appPlugins/ToolMilling.py:3964 appPlugins/ToolNCC.py:4079 appPlugins/ToolPaint.py:2956 #: appPlugins/ToolPanelize.py:1168 appPlugins/ToolPunchGerber.py:2006 #: appPlugins/ToolQRCode.py:755 appPlugins/ToolSub.py:803 msgid "" "Beginner Mode - many parameters are hidden.\n" "Advanced Mode - full control.\n" "Permanent change is done in 'Preferences' menu." msgstr "" #: appEditors/AppExcEditor.py:4042 appEditors/AppGerberEditor.py:6156 #: appEditors/appGCodeEditor.py:791 msgid "Name:" msgstr "" #: appEditors/AppExcEditor.py:4049 appGUI/ObjectUI.py:287 appGUI/ObjectUI.py:694 #: appGUI/ObjectUI.py:1024 appGUI/ObjectUI.py:1036 appGUI/ObjectUI.py:1437 #: appPlugins/ToolDrilling.py:2452 appPlugins/ToolIsolation.py:3371 #: appPlugins/ToolMilling.py:4035 appPlugins/ToolNCC.py:4141 appPlugins/ToolPaint.py:3018 #: appPlugins/ToolSolderPaste.py:1251 msgid "Tools Table" msgstr "" #: appEditors/AppExcEditor.py:4051 msgid "" "Tools in this Excellon object\n" "when are used for drilling." msgstr "" #: appEditors/AppExcEditor.py:4072 msgid "Convert Slots" msgstr "" #: appEditors/AppExcEditor.py:4076 msgid "Convert the slots in the selected tools to drills." msgstr "" #: appEditors/AppExcEditor.py:4086 msgid "Add/Delete Tool" msgstr "" #: appEditors/AppExcEditor.py:4088 msgid "" "Add/Delete a tool to the tool list\n" "for this Excellon object." msgstr "" #: appEditors/AppExcEditor.py:4100 appEditors/AppGeoEditor.py:508 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:44 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:127 appPlugins/ToolCutOut.py:2348 #: appPlugins/ToolCutOut.py:2534 appPlugins/ToolIsolation.py:3443 #: appPlugins/ToolMilling.py:4226 appPlugins/ToolNCC.py:4227 appPlugins/ToolNCC.py:4240 #: appPlugins/ToolPaint.py:3097 msgid "Tool Dia" msgstr "" #: appEditors/AppExcEditor.py:4102 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:56 #: appPlugins/ToolIsolation.py:3445 appPlugins/ToolMilling.py:4228 #: appPlugins/ToolNCC.py:4229 msgid "Diameter for the new tool" msgstr "" #: appEditors/AppExcEditor.py:4114 appEditors/AppGeoEditor.py:763 #: appEditors/AppGerberEditor.py:6290 appEditors/AppGerberEditor.py:6829 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:388 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:340 #: appPlugins/ToolCopperThieving.py:1753 appPlugins/ToolDblSided.py:945 #: appPlugins/ToolLevelling.py:2100 appPlugins/ToolNCC.py:227 appPlugins/ToolPaint.py:224 #: appPlugins/ToolSolderPaste.py:136 appPlugins/ToolTransform.py:639 appMain.py:7230 msgid "Add" msgstr "" #: appEditors/AppExcEditor.py:4117 msgid "" "Add a new tool to the tool list\n" "with the diameter specified above." msgstr "" #: appEditors/AppExcEditor.py:4126 msgid "Delete Tool" msgstr "" #: appEditors/AppExcEditor.py:4129 msgid "" "Delete a tool in the tool list\n" "by selecting a row in the tool table." msgstr "" #: appEditors/AppExcEditor.py:4152 msgid "Resize Tool" msgstr "" #: appEditors/AppExcEditor.py:4154 msgid "Resize a drill or a selection of drills." msgstr "" #: appEditors/AppExcEditor.py:4159 msgid "Resize Dia" msgstr "" #: appEditors/AppExcEditor.py:4161 msgid "Diameter to resize to." msgstr "" #: appEditors/AppExcEditor.py:4175 msgid "Resize" msgstr "" #: appEditors/AppExcEditor.py:4178 msgid "Resize drill(s)" msgstr "" #: appEditors/AppExcEditor.py:4207 appGUI/MainGUI.py:745 appGUI/MainGUI.py:1184 #: appGUI/MainGUI.py:1844 appGUI/MainGUI.py:2554 appGUI/MainGUI.py:5257 msgid "Add Drill Array" msgstr "" #: appEditors/AppExcEditor.py:4209 msgid "Add an array of drills (linear or circular array)" msgstr "" #: appEditors/AppExcEditor.py:4215 appEditors/AppExcEditor.py:4427 #: appEditors/AppGeoEditor.py:3479 appEditors/AppGerberEditor.py:4593 #: appEditors/AppGerberEditor.py:6182 appEditors/AppGerberEditor.py:6255 #: appEditors/AppGerberEditor.py:6634 appGUI/ObjectUI.py:334 #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:56 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:167 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:62 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:126 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:40 #: appPlugins/ToolCopperThieving.py:1392 appPlugins/ToolCutOut.py:2311 #: appPlugins/ToolCutOut.py:2497 appPlugins/ToolDblSided.py:1072 #: appPlugins/ToolExtract.py:1077 appPlugins/ToolFilm.py:1294 appPlugins/ToolFilm.py:1370 #: appPlugins/ToolFilm.py:1445 appPlugins/ToolIsolation.py:3840 #: appPlugins/ToolMarkers.py:1220 appPlugins/ToolMarkers.py:1482 #: appPlugins/ToolMilling.py:3996 appPlugins/ToolNCC.py:4107 appPlugins/ToolNCC.py:4574 #: appPlugins/ToolObjectDistance.py:474 appPlugins/ToolPaint.py:2984 #: appPlugins/ToolPaint.py:3324 appPlugins/ToolPunchGerber.py:2107 #: appPlugins/ToolPunchGerber.py:2318 appPlugins/ToolTransform.py:646 msgid "Type" msgstr "" #: appEditors/AppExcEditor.py:4217 msgid "" "Select the type of drills array to create.\n" "It can be Linear X(Y) or Circular" msgstr "" #: appEditors/AppExcEditor.py:4221 appEditors/AppExcEditor.py:4433 #: appEditors/AppGerberEditor.py:6640 msgid "Linear" msgstr "" #: appEditors/AppExcEditor.py:4222 appEditors/AppExcEditor.py:4434 #: appEditors/AppGerberEditor.py:6641 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:43 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:162 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:99 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:43 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:159 #: appPlugins/ToolExtract.py:1033 appPlugins/ToolExtract.py:1167 #: appPlugins/ToolFiducials.py:1034 appPlugins/ToolPunchGerber.py:2063 #: appPlugins/ToolPunchGerber.py:2219 msgid "Circular" msgstr "" #: appEditors/AppExcEditor.py:4228 appEditors/AppExcEditor.py:4440 msgid "Number" msgstr "" #: appEditors/AppExcEditor.py:4229 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:69 msgid "Specify how many drills to be in the array." msgstr "" #: appEditors/AppExcEditor.py:4248 appEditors/AppExcEditor.py:4305 #: appEditors/AppExcEditor.py:4369 appEditors/AppExcEditor.py:4461 #: appEditors/AppExcEditor.py:4519 appEditors/AppGeoEditor.py:2209 #: appEditors/AppGerberEditor.py:1824 appEditors/AppGerberEditor.py:6667 #: appEditors/AppGerberEditor.py:6721 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:202 msgid "Direction" msgstr "" #: appEditors/AppExcEditor.py:4250 appEditors/AppExcEditor.py:4463 #: appEditors/AppGerberEditor.py:6669 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:94 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:264 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:134 msgid "" "Direction on which the linear array is oriented:\n" "- 'X' - horizontal axis \n" "- 'Y' - vertical axis or \n" "- 'Angle' - a custom angle for the array inclination" msgstr "" #: appEditors/AppExcEditor.py:4256 appEditors/AppExcEditor.py:4377 #: appEditors/AppExcEditor.py:4469 appEditors/AppGerberEditor.py:6675 #: appGUI/GUIElements.py:5208 appGUI/MainGUI.py:489 appGUI/MainGUI.py:705 #: appGUI/MainGUI.py:4885 appGUI/MainGUI.py:5153 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:100 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:211 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:270 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:140 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:181 appPlugins/ToolFilm.py:1519 msgid "X" msgstr "" #: appEditors/AppExcEditor.py:4257 appEditors/AppExcEditor.py:4378 #: appEditors/AppExcEditor.py:4470 appEditors/AppGerberEditor.py:6676 #: appGUI/GUIElements.py:5215 appGUI/MainGUI.py:492 appGUI/MainGUI.py:4886 #: appGUI/MainGUI.py:5154 appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:101 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:212 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:271 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:141 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:182 appPlugins/ToolFilm.py:1520 msgid "Y" msgstr "" #: appEditors/AppExcEditor.py:4258 appEditors/AppExcEditor.py:4277 #: appEditors/AppExcEditor.py:4316 appEditors/AppExcEditor.py:4379 #: appEditors/AppExcEditor.py:4385 appEditors/AppExcEditor.py:4471 #: appEditors/AppExcEditor.py:4491 appEditors/AppExcEditor.py:4530 #: appEditors/AppGeoEditor.py:778 appEditors/AppGerberEditor.py:6677 #: appEditors/AppGerberEditor.py:6697 appEditors/AppGerberEditor.py:6734 #: appEditors/AppGerberEditor.py:6844 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:102 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:121 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:213 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:218 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:272 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:293 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:142 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:160 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:133 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:102 appPlugins/ToolDistance.py:803 #: appPlugins/ToolFilm.py:1452 appPlugins/ToolObjectDistance.py:568 #: appPlugins/ToolTransform.py:692 msgid "Angle" msgstr "" #: appEditors/AppExcEditor.py:4264 appEditors/AppExcEditor.py:4477 #: appEditors/AppGerberEditor.py:6683 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:108 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:278 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:148 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:295 appPlugins/ToolCutOut.py:2764 msgid "Pitch" msgstr "" #: appEditors/AppExcEditor.py:4266 appEditors/AppExcEditor.py:4479 #: appEditors/AppGerberEditor.py:6685 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:110 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:280 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:150 msgid "Pitch = Distance between elements of the array." msgstr "" #: appEditors/AppExcEditor.py:4279 appEditors/AppExcEditor.py:4493 #: appEditors/AppGerberEditor.py:6699 msgid "" "Angle at which the linear array is placed.\n" "The precision is of max 2 decimals.\n" "Min value is: -360.00 degrees.\n" "Max value is: 360.00 degrees." msgstr "" #: appEditors/AppExcEditor.py:4306 appEditors/AppExcEditor.py:4520 #: appEditors/AppGerberEditor.py:6723 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:149 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:321 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:188 msgid "" "Direction for circular array.\n" "Can be CW = clockwise or CCW = counter clockwise." msgstr "" #: appEditors/AppExcEditor.py:4309 appEditors/AppExcEditor.py:4523 #: appEditors/AppGerberEditor.py:6727 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:153 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:325 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:192 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:371 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:404 msgid "CW" msgstr "" #: appEditors/AppExcEditor.py:4310 appEditors/AppExcEditor.py:4524 #: appEditors/AppGerberEditor.py:6728 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:154 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:326 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:193 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:372 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:405 msgid "CCW" msgstr "" #: appEditors/AppExcEditor.py:4317 appEditors/AppExcEditor.py:4531 #: appEditors/AppGerberEditor.py:6736 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:123 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:162 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:295 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:334 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:162 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:201 msgid "Angle at which each element in circular array is placed." msgstr "" #: appEditors/AppExcEditor.py:4347 msgid "Slot Parameters" msgstr "" #: appEditors/AppExcEditor.py:4349 msgid "" "Parameters for adding a slot (hole with oval shape)\n" "either single or as an part of an array." msgstr "" #: appEditors/AppExcEditor.py:4355 appEditors/AppGeoEditor.py:3559 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:186 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:68 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:133 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:68 appObjects/FlatCAMObj.py:942 #: appPlugins/ToolFilm.py:1376 appPlugins/ToolFilm.py:1452 appPlugins/ToolMarkers.py:1248 #: appPlugins/ToolReport.py:607 msgid "Length" msgstr "" #: appEditors/AppExcEditor.py:4357 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:188 msgid "Length. The length of the slot." msgstr "" #: appEditors/AppExcEditor.py:4371 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:204 msgid "" "Direction on which the slot is oriented:\n" "- 'X' - horizontal axis \n" "- 'Y' - vertical axis or \n" "- 'Angle' - a custom angle for the slot inclination" msgstr "" #: appEditors/AppExcEditor.py:4387 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:220 msgid "" "Angle at which the slot is placed.\n" "The precision is of max 2 decimals.\n" "Min value is: -360.00 degrees.\n" "Max value is: 360.00 degrees." msgstr "" #: appEditors/AppExcEditor.py:4419 msgid "Slot Array Parameters" msgstr "" #: appEditors/AppExcEditor.py:4421 msgid "Parameters for the array of slots (linear or circular array)" msgstr "" #: appEditors/AppExcEditor.py:4429 msgid "" "Select the type of slot array to create.\n" "It can be Linear X(Y) or Circular" msgstr "" #: appEditors/AppExcEditor.py:4441 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:251 msgid "Specify how many slots to be in the array." msgstr "" #: appEditors/AppExcEditor.py:4545 appEditors/AppGeoEditor.py:3637 #: appEditors/AppGerberEditor.py:6751 appEditors/appGCodeEditor.py:74 #: appEditors/appGCodeEditor.py:75 appEditors/appGCodeEditor.py:886 appGUI/MainGUI.py:351 #: appGUI/MainGUI.py:1861 appMain.py:2744 msgid "Exit Editor" msgstr "" #: appEditors/AppExcEditor.py:4548 appEditors/AppGeoEditor.py:3640 #: appEditors/AppGerberEditor.py:6754 appEditors/appGCodeEditor.py:889 #: appGUI/MainGUI.py:1042 appGUI/MainGUI.py:2414 msgid "Exit from Editor." msgstr "" #: appEditors/AppGeoEditor.py:58 msgid "Buffer Selection" msgstr "" #: appEditors/AppGeoEditor.py:93 appEditors/AppGerberEditor.py:6455 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:226 msgid "Buffer distance" msgstr "" #: appEditors/AppGeoEditor.py:96 appEditors/AppGerberEditor.py:6459 msgid "Buffer corner" msgstr "" #: appEditors/AppGeoEditor.py:98 msgid "" "There are 3 types of corners:\n" " - 'Round': the corner is rounded for exterior buffer.\n" " - 'Square': the corner is met in a sharp angle for exterior buffer.\n" " - 'Beveled': the corner is a line that directly connects the features meeting in the " "corner" msgstr "" #: appEditors/AppGeoEditor.py:104 appEditors/AppGerberEditor.py:6467 msgid "Round" msgstr "" #: appEditors/AppGeoEditor.py:105 appEditors/AppGerberEditor.py:6468 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:59 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:188 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:77 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:59 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:185 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:140 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:449 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:321 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:469 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:326 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290 appPlugins/ToolDrilling.py:2988 #: appPlugins/ToolExtract.py:1049 appPlugins/ToolExtract.py:1193 #: appPlugins/ToolFollow.py:762 appPlugins/ToolInvertGerber.py:292 #: appPlugins/ToolIsolation.py:3898 appPlugins/ToolMilling.py:5054 #: appPlugins/ToolNCC.py:4602 appPlugins/ToolPaint.py:3353 #: appPlugins/ToolPunchGerber.py:2079 appPlugins/ToolPunchGerber.py:2245 #: appPlugins/ToolQRCode.py:913 msgid "Square" msgstr "" #: appEditors/AppGeoEditor.py:106 appEditors/AppGerberEditor.py:6469 msgid "Beveled" msgstr "" #: appEditors/AppGeoEditor.py:114 msgid "Buffer Interior" msgstr "" #: appEditors/AppGeoEditor.py:116 msgid "Buffer Exterior" msgstr "" #: appEditors/AppGeoEditor.py:122 msgid "Full Buffer" msgstr "" #: appEditors/AppGeoEditor.py:152 appEditors/AppGeoEditor.py:161 #: appEditors/AppGeoEditor.py:401 appEditors/AppGeoEditor.py:410 #: appEditors/AppGeoEditor.py:625 appEditors/AppGeoEditor.py:634 #: appEditors/AppGeoEditor.py:1127 appEditors/AppGeoEditor.py:1136 #: appEditors/AppGerberEditor.py:7193 appEditors/AppGerberEditor.py:7202 #: appPlugins/ToolAlignObjects.py:98 appPlugins/ToolAlignObjects.py:107 #: appPlugins/ToolCalculators.py:56 appPlugins/ToolCalculators.py:65 #: appPlugins/ToolCalibration.py:89 appPlugins/ToolCalibration.py:98 #: appPlugins/ToolCopperThieving.py:108 appPlugins/ToolCopperThieving.py:117 #: appPlugins/ToolCutOut.py:152 appPlugins/ToolCutOut.py:161 appPlugins/ToolDblSided.py:74 #: appPlugins/ToolDblSided.py:83 appPlugins/ToolDistance.py:129 #: appPlugins/ToolDistance.py:138 appPlugins/ToolDrilling.py:155 #: appPlugins/ToolDrilling.py:164 appPlugins/ToolEtchCompensation.py:68 #: appPlugins/ToolEtchCompensation.py:77 appPlugins/ToolExtract.py:94 #: appPlugins/ToolExtract.py:103 appPlugins/ToolFiducials.py:102 #: appPlugins/ToolFiducials.py:111 appPlugins/ToolFilm.py:121 appPlugins/ToolFilm.py:130 #: appPlugins/ToolFollow.py:94 appPlugins/ToolFollow.py:103 appPlugins/ToolImage.py:63 #: appPlugins/ToolImage.py:72 appPlugins/ToolInvertGerber.py:67 #: appPlugins/ToolInvertGerber.py:76 appPlugins/ToolIsolation.py:165 #: appPlugins/ToolIsolation.py:174 appPlugins/ToolLevelling.py:151 #: appPlugins/ToolLevelling.py:160 appPlugins/ToolMarkers.py:117 #: appPlugins/ToolMarkers.py:126 appPlugins/ToolMilling.py:197 appPlugins/ToolMilling.py:206 #: appPlugins/ToolNCC.py:167 appPlugins/ToolNCC.py:176 appPlugins/ToolObjectDistance.py:76 #: appPlugins/ToolObjectDistance.py:85 appPlugins/ToolOptimal.py:80 #: appPlugins/ToolOptimal.py:89 appPlugins/ToolPaint.py:175 appPlugins/ToolPaint.py:184 #: appPlugins/ToolPanelize.py:76 appPlugins/ToolPanelize.py:85 #: appPlugins/ToolPcbWizard.py:77 appPlugins/ToolPcbWizard.py:86 #: appPlugins/ToolPunchGerber.py:120 appPlugins/ToolPunchGerber.py:129 #: appPlugins/ToolQRCode.py:93 appPlugins/ToolQRCode.py:102 appPlugins/ToolReport.py:91 #: appPlugins/ToolReport.py:100 appPlugins/ToolRulesCheck.py:83 #: appPlugins/ToolRulesCheck.py:92 appPlugins/ToolSolderPaste.py:88 #: appPlugins/ToolSolderPaste.py:97 appPlugins/ToolSub.py:129 appPlugins/ToolSub.py:138 #: appPlugins/ToolTransform.py:54 appPlugins/ToolTransform.py:63 msgid "Plugin" msgstr "" #: appEditors/AppGeoEditor.py:168 appEditors/AppGeoEditor.py:3113 appGUI/MainGUI.py:721 #: appGUI/MainGUI.py:5137 appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:215 msgid "Buffer Tool" msgstr "" #: appEditors/AppGeoEditor.py:184 appEditors/AppGeoEditor.py:201 #: appEditors/AppGeoEditor.py:218 appEditors/AppGeoEditor.py:3132 #: appEditors/AppGeoEditor.py:3158 appEditors/AppGeoEditor.py:3184 #: appEditors/AppGerberEditor.py:5927 msgid "Buffer distance value is missing or wrong format. Add it and retry." msgstr "" #: appEditors/AppGeoEditor.py:235 msgid "Text Input Tool" msgstr "" #: appEditors/AppGeoEditor.py:283 msgid "Font" msgstr "" #: appEditors/AppGeoEditor.py:357 appEditors/AppGerberEditor.py:4593 #: appEditors/AppGerberEditor.py:6182 appGUI/ObjectUI.py:334 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:110 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:195 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:234 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:40 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:150 #: appPlugins/ToolCopperThieving.py:1520 appPlugins/ToolCopperThieving.py:1566 #: appPlugins/ToolCutOut.py:2481 appPlugins/ToolExtract.py:1077 #: appPlugins/ToolFiducials.py:975 appPlugins/ToolPunchGerber.py:2107 msgid "Size" msgstr "" #: appEditors/AppGeoEditor.py:361 appGUI/MainGUI.py:1780 msgid "Text" msgstr "" #: appEditors/AppGeoEditor.py:372 appGUI/MainGUI.py:1651 msgid "Apply" msgstr "" #: appEditors/AppGeoEditor.py:416 msgid "Text Tool" msgstr "" #: appEditors/AppGeoEditor.py:476 appObjects/FlatCAMExcellon.py:1002 #: appPlugins/ToolDrilling.py:930 appPlugins/ToolDrilling.py:1307 #: appPlugins/ToolDrilling.py:2513 appPlugins/ToolIsolation.py:918 #: appPlugins/ToolIsolation.py:3512 appPlugins/ToolMilling.py:1683 #: appPlugins/ToolMilling.py:1756 appPlugins/ToolMilling.py:2576 #: appPlugins/ToolMilling.py:4287 appPlugins/ToolNCC.py:612 appPlugins/ToolNCC.py:2510 #: appPlugins/ToolNCC.py:4300 appPlugins/ToolPaint.py:590 appPlugins/ToolPaint.py:3156 msgid "Tool" msgstr "" #: appEditors/AppGeoEditor.py:484 appEditors/AppGeoEditor.py:640 appGUI/MainGUI.py:725 msgid "Paint Tool" msgstr "" #: appEditors/AppGeoEditor.py:510 msgid "Diameter of the tool to be used in the operation." msgstr "" #: appEditors/AppGeoEditor.py:556 msgid "" "Algorithm to paint the polygons:\n" "- Standard: Fixed step inwards.\n" "- Seed-based: Outwards from seed.\n" "- Line-based: Parallel lines." msgstr "" #: appEditors/AppGeoEditor.py:680 appEditors/AppGeoEditor.py:1194 #: appEditors/AppGeoEditor.py:1230 appEditors/AppGeoEditor.py:1253 #: appEditors/AppGeoEditor.py:1399 appEditors/AppGeoEditor.py:1424 #: appEditors/AppGeoEditor.py:1459 appEditors/AppGeoEditor.py:1494 #: appEditors/AppGeoEditor.py:1525 appEditors/AppGeoEditor.py:1550 #: appEditors/AppGeoEditor.py:2747 appEditors/AppGeoEditor.py:2818 #: appEditors/AppGeoEditor.py:3120 appEditors/AppGeoEditor.py:3146 #: appEditors/AppGeoEditor.py:3172 appEditors/AppGeoEditor.py:5046 #: appEditors/AppGerberEditor.py:7256 appEditors/AppGerberEditor.py:7296 #: appEditors/AppGerberEditor.py:7319 appEditors/AppGerberEditor.py:7464 #: appEditors/AppGerberEditor.py:7497 appEditors/AppGerberEditor.py:7540 #: appEditors/AppGerberEditor.py:7581 appEditors/AppGerberEditor.py:7617 #: appEditors/AppGerberEditor.py:7653 msgid "No shape selected." msgstr "" #: appEditors/AppGeoEditor.py:704 appEditors/AppGeoEditor.py:1154 #: appEditors/AppGerberEditor.py:6770 appEditors/AppGerberEditor.py:7220 #: appGUI/MainGUI.py:729 msgid "Transform Tool" msgstr "" #: appEditors/AppGeoEditor.py:705 appEditors/AppGeoEditor.py:794 #: appEditors/AppGerberEditor.py:6771 appEditors/AppGerberEditor.py:6860 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:88 appPlugins/ToolTransform.py:573 #: appPlugins/ToolTransform.py:683 appPlugins/ToolTransform.py:708 msgid "Rotate" msgstr "" #: appEditors/AppGeoEditor.py:706 appEditors/AppGerberEditor.py:6772 #: appPlugins/ToolTransform.py:574 msgid "Skew/Shear" msgstr "" #: appEditors/AppGeoEditor.py:707 appEditors/AppGerberEditor.py:6526 #: appEditors/AppGerberEditor.py:6773 appGUI/MainGUI.py:810 appGUI/MainGUI.py:1287 #: appGUI/MainGUI.py:1829 appGUI/MainGUI.py:2651 appGUI/MainGUI.py:5405 #: appGUI/ObjectUI.py:121 appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:42 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:171 appPlugins/ToolFilm.py:1357 #: appPlugins/ToolTransform.py:575 appPlugins/ToolTransform.py:797 msgid "Scale" msgstr "" #: appEditors/AppGeoEditor.py:708 appEditors/AppGerberEditor.py:6774 #: appPlugins/ToolTransform.py:576 msgid "Mirror (Flip)" msgstr "" #: appEditors/AppGeoEditor.py:710 appEditors/AppGerberEditor.py:6482 #: appEditors/AppGerberEditor.py:6776 appGUI/MainGUI.py:807 appGUI/MainGUI.py:1285 #: appGUI/MainGUI.py:1782 appGUI/MainGUI.py:1827 appGUI/MainGUI.py:2649 #: appGUI/MainGUI.py:5396 appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:257 #: appPlugins/ToolTransform.py:578 appPlugins/ToolTransform.py:948 msgid "Buffer" msgstr "" #: appEditors/AppGeoEditor.py:738 appEditors/AppGerberEditor.py:6804 #: appGUI/GUIElements.py:4267 appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:94 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:157 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:94 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:42 appPlugins/ToolDblSided.py:901 #: appPlugins/ToolDblSided.py:1092 appPlugins/ToolFilm.py:1402 appPlugins/ToolFilm.py:1478 #: appPlugins/ToolMarkers.py:1274 appPlugins/ToolPanelize.py:1224 #: appPlugins/ToolTransform.py:614 msgid "Reference" msgstr "" #: appEditors/AppGeoEditor.py:740 appEditors/AppGerberEditor.py:6806 msgid "" "The reference point for Rotate, Skew, Scale, Mirror.\n" "Can be:\n" "- Origin -> it is the 0, 0 point\n" "- Selection -> the center of the bounding box of the selected objects\n" "- Point -> a custom point defined by X,Y coordinates\n" "- Min Selection -> the point (minx, miny) of the bounding box of the selection" msgstr "" #: appEditors/AppGeoEditor.py:748 appEditors/AppGerberEditor.py:6814 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52 #: appPlugins/ToolCalibration.py:161 appPlugins/ToolCalibration.py:162 #: appPlugins/ToolTransform.py:624 msgid "Origin" msgstr "" #: appEditors/AppGeoEditor.py:748 appEditors/AppGeoEditor.py:1167 #: appEditors/AppGerberEditor.py:6814 appEditors/AppGerberEditor.py:7229 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:258 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:120 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:299 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:310 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:257 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52 appPlugins/ToolFiducials.py:1060 #: appPlugins/ToolFollow.py:743 appPlugins/ToolIsolation.py:3822 #: appPlugins/ToolMarkers.py:1365 appPlugins/ToolNCC.py:4563 appPlugins/ToolPaint.py:3304 #: appPlugins/ToolPunchGerber.py:2307 appPlugins/ToolTransform.py:624 defaults.py:622 msgid "Selection" msgstr "" #: appEditors/AppGeoEditor.py:748 appEditors/AppGerberEditor.py:6814 #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:58 appPlugins/ToolDblSided.py:912 #: appPlugins/ToolTransform.py:624 msgid "Point" msgstr "" #: appEditors/AppGeoEditor.py:748 appEditors/AppGerberEditor.py:6814 msgid "Minimum" msgstr "" #: appEditors/AppGeoEditor.py:754 appEditors/AppGeoEditor.py:1050 #: appEditors/AppGerberEditor.py:6820 appEditors/AppGerberEditor.py:7116 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:136 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:73 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:133 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:48 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:70 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:92 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:114 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:148 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:170 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:192 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:227 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:261 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:283 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:296 appPlugins/ToolExtract.py:1251 #: appPlugins/ToolExtract.py:1280 appPlugins/ToolPunchGerber.py:2186 #: appPlugins/ToolPunchGerber.py:2294 appPlugins/ToolRulesCheck.py:1495 #: appPlugins/ToolRulesCheck.py:1519 appPlugins/ToolRulesCheck.py:1544 #: appPlugins/ToolRulesCheck.py:1569 appPlugins/ToolRulesCheck.py:1606 #: appPlugins/ToolRulesCheck.py:1631 appPlugins/ToolRulesCheck.py:1656 #: appPlugins/ToolRulesCheck.py:1694 appPlugins/ToolRulesCheck.py:1731 #: appPlugins/ToolRulesCheck.py:1756 appPlugins/ToolTransform.py:630 #: appPlugins/ToolTransform.py:995 appMain.py:9147 msgid "Value" msgstr "" #: appEditors/AppGeoEditor.py:756 appEditors/AppGerberEditor.py:6822 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:60 appPlugins/ToolTransform.py:632 msgid "A point of reference in format X,Y." msgstr "" #: appEditors/AppGeoEditor.py:765 appEditors/AppGerberEditor.py:6831 #: appPlugins/ToolTransform.py:641 msgid "Add point coordinates from clipboard." msgstr "" #: appEditors/AppGeoEditor.py:780 appEditors/AppGerberEditor.py:6846 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:104 appPlugins/ToolTransform.py:694 msgid "" "Angle, in degrees.\n" "Float number between -360 and 359.\n" "Positive numbers for CW motion.\n" "Negative numbers for CCW motion." msgstr "" #: appEditors/AppGeoEditor.py:796 appEditors/AppGerberEditor.py:6862 #: appPlugins/ToolTransform.py:710 msgid "" "Rotate the selected object(s).\n" "The point of reference is the middle of\n" "the bounding box for all selected objects." msgstr "" #: appEditors/AppGeoEditor.py:816 appEditors/AppGeoEditor.py:878 #: appEditors/AppGerberEditor.py:6882 appEditors/AppGerberEditor.py:6944 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:125 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:177 appPlugins/ToolTransform.py:733 #: appPlugins/ToolTransform.py:803 msgid "Link" msgstr "" #: appEditors/AppGeoEditor.py:818 appEditors/AppGeoEditor.py:880 #: appEditors/AppGerberEditor.py:6884 appEditors/AppGerberEditor.py:6946 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:127 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:179 appPlugins/ToolTransform.py:735 #: appPlugins/ToolTransform.py:805 msgid "Link the Y entry to X entry and copy its content." msgstr "" #: appEditors/AppGeoEditor.py:823 appEditors/AppGerberEditor.py:6889 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:143 appPlugins/ToolTransform.py:746 msgid "X angle" msgstr "" #: appEditors/AppGeoEditor.py:825 appEditors/AppGeoEditor.py:846 #: appEditors/AppGerberEditor.py:6891 appEditors/AppGerberEditor.py:6912 #: appPlugins/ToolTransform.py:748 appPlugins/ToolTransform.py:769 msgid "" "Angle for Skew action, in degrees.\n" "Float number between -360 and 360." msgstr "" #: appEditors/AppGeoEditor.py:833 appEditors/AppGerberEditor.py:6899 #: appPlugins/ToolTransform.py:756 msgid "Skew X" msgstr "" #: appEditors/AppGeoEditor.py:835 appEditors/AppGeoEditor.py:856 #: appEditors/AppGerberEditor.py:6901 appEditors/AppGerberEditor.py:6922 #: appPlugins/ToolTransform.py:758 appPlugins/ToolTransform.py:779 msgid "" "Skew/shear the selected object(s).\n" "The point of reference is the middle of\n" "the bounding box for all selected objects." msgstr "" #: appEditors/AppGeoEditor.py:844 appEditors/AppGerberEditor.py:6910 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:157 appPlugins/ToolTransform.py:767 msgid "Y angle" msgstr "" #: appEditors/AppGeoEditor.py:854 appEditors/AppGerberEditor.py:6920 #: appPlugins/ToolTransform.py:777 msgid "Skew Y" msgstr "" #: appEditors/AppGeoEditor.py:885 appEditors/AppGerberEditor.py:6951 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:194 appPlugins/ToolTransform.py:815 msgid "X factor" msgstr "" #: appEditors/AppGeoEditor.py:887 appEditors/AppGerberEditor.py:6953 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:196 appPlugins/ToolTransform.py:817 msgid "Factor for scaling on X axis." msgstr "" #: appEditors/AppGeoEditor.py:894 appEditors/AppGerberEditor.py:6960 #: appPlugins/ToolTransform.py:824 msgid "Scale X" msgstr "" #: appEditors/AppGeoEditor.py:896 appEditors/AppGeoEditor.py:916 #: appEditors/AppGerberEditor.py:6962 appEditors/AppGerberEditor.py:6982 #: appPlugins/ToolTransform.py:826 appPlugins/ToolTransform.py:846 msgid "" "Scale the selected object(s).\n" "The point of reference depends on \n" "the Scale reference checkbox state." msgstr "" #: appEditors/AppGeoEditor.py:905 appEditors/AppGerberEditor.py:6971 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:207 appPlugins/ToolTransform.py:835 msgid "Y factor" msgstr "" #: appEditors/AppGeoEditor.py:907 appEditors/AppGerberEditor.py:6973 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:209 appPlugins/ToolTransform.py:837 msgid "Factor for scaling on Y axis." msgstr "" #: appEditors/AppGeoEditor.py:914 appEditors/AppGerberEditor.py:6980 #: appPlugins/ToolTransform.py:844 msgid "Scale Y" msgstr "" #: appEditors/AppGeoEditor.py:941 appEditors/AppGerberEditor.py:7007 #: appPlugins/ToolTransform.py:874 msgid "Flip on X" msgstr "" #: appEditors/AppGeoEditor.py:943 appEditors/AppGeoEditor.py:948 #: appEditors/AppGerberEditor.py:7009 appEditors/AppGerberEditor.py:7014 #: appPlugins/ToolTransform.py:876 appPlugins/ToolTransform.py:881 msgid "Flip the selected object(s) over the X axis." msgstr "" #: appEditors/AppGeoEditor.py:946 appEditors/AppGerberEditor.py:7012 #: appPlugins/ToolTransform.py:879 msgid "Flip on Y" msgstr "" #: appEditors/AppGeoEditor.py:966 appEditors/AppGerberEditor.py:7032 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:74 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:138 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:231 appPlugins/ToolFilm.py:1382 #: appPlugins/ToolFilm.py:1458 appPlugins/ToolTransform.py:902 msgid "X val" msgstr "" #: appEditors/AppGeoEditor.py:968 appEditors/AppGerberEditor.py:7034 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:233 appPlugins/ToolTransform.py:904 msgid "Distance to offset on X axis. In current units." msgstr "" #: appEditors/AppGeoEditor.py:975 appEditors/AppGerberEditor.py:7041 #: appPlugins/ToolTransform.py:911 msgid "Offset X" msgstr "" #: appEditors/AppGeoEditor.py:977 appEditors/AppGeoEditor.py:997 #: appEditors/AppGerberEditor.py:7043 appEditors/AppGerberEditor.py:7063 #: appPlugins/ToolTransform.py:913 appPlugins/ToolTransform.py:933 msgid "" "Offset the selected object(s).\n" "The point of reference is the middle of\n" "the bounding box for all selected objects.\n" msgstr "" #: appEditors/AppGeoEditor.py:986 appEditors/AppGerberEditor.py:7052 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:84 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:147 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:244 appPlugins/ToolFilm.py:1392 #: appPlugins/ToolFilm.py:1468 appPlugins/ToolTransform.py:922 msgid "Y val" msgstr "" #: appEditors/AppGeoEditor.py:988 appEditors/AppGerberEditor.py:7054 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:246 appPlugins/ToolTransform.py:924 msgid "Distance to offset on Y axis. In current units." msgstr "" #: appEditors/AppGeoEditor.py:995 appEditors/AppGerberEditor.py:7061 #: appPlugins/ToolTransform.py:931 msgid "Offset Y" msgstr "" #: appEditors/AppGeoEditor.py:1015 appEditors/AppGerberEditor.py:7081 appGUI/ObjectUI.py:519 #: appGUI/ObjectUI.py:561 appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:76 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:139 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:224 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:263 appPlugins/ToolFilm.py:1562 #: appPlugins/ToolInvertGerber.py:291 appPlugins/ToolQRCode.py:912 #: appPlugins/ToolTransform.py:954 msgid "Rounded" msgstr "" #: appEditors/AppGeoEditor.py:1017 appEditors/AppGerberEditor.py:7083 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:265 appPlugins/ToolTransform.py:956 msgid "" "If checked then the buffer will surround the buffered shape,\n" "every corner will be rounded.\n" "If not checked then the buffer will follow the exact geometry\n" "of the buffered shape." msgstr "" #: appEditors/AppGeoEditor.py:1025 appEditors/AppGerberEditor.py:7091 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:279 appPlugins/ToolDistance.py:142 #: appPlugins/ToolDistance.py:684 appPlugins/ToolTransform.py:970 msgid "Distance" msgstr "" #: appEditors/AppGeoEditor.py:1027 appEditors/AppGerberEditor.py:7093 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:281 appPlugins/ToolTransform.py:972 msgid "" "A positive value will create the effect of dilation,\n" "while a negative value will create the effect of erosion.\n" "Each geometry element of the object will be increased\n" "or decreased with the 'distance'." msgstr "" #: appEditors/AppGeoEditor.py:1039 appEditors/AppGerberEditor.py:7105 #: appPlugins/ToolTransform.py:984 msgid "Buffer D" msgstr "" #: appEditors/AppGeoEditor.py:1041 appEditors/AppGerberEditor.py:7107 #: appPlugins/ToolTransform.py:986 msgid "" "Create the buffer effect on each geometry,\n" "element from the selected object, using the distance." msgstr "" #: appEditors/AppGeoEditor.py:1052 appEditors/AppGerberEditor.py:7118 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:298 appPlugins/ToolTransform.py:997 msgid "" "A positive value will create the effect of dilation,\n" "while a negative value will create the effect of erosion.\n" "Each geometry element of the object will be increased\n" "or decreased to fit the 'Value'. Value is a percentage\n" "of the initial dimension." msgstr "" #: appEditors/AppGeoEditor.py:1065 appEditors/AppGerberEditor.py:7131 #: appPlugins/ToolTransform.py:1010 msgid "Buffer F" msgstr "" #: appEditors/AppGeoEditor.py:1067 appEditors/AppGerberEditor.py:7133 #: appPlugins/ToolTransform.py:1012 msgid "" "Create the buffer effect on each geometry,\n" "element from the selected object, using the factor." msgstr "" #: appEditors/AppGeoEditor.py:1166 appEditors/AppGerberEditor.py:7228 #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:47 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:68 #: appPlugins/ToolCalibration.py:906 appPlugins/ToolDrilling.py:2942 #: appPlugins/ToolMilling.py:5008 appPlugins/ToolPanelize.py:1244 #: appPlugins/ToolTransform.py:624 msgid "Object" msgstr "" #: appEditors/AppGeoEditor.py:1238 appEditors/AppGerberEditor.py:7304 #: appPlugins/ToolTransform.py:184 msgid "Incorrect format for Point value. Needs format X,Y" msgstr "" #: appEditors/AppGeoEditor.py:1263 appEditors/AppGerberEditor.py:7329 #: appPlugins/ToolTransform.py:201 msgid "Rotate transformation can not be done for a value of 0." msgstr "" #: appEditors/AppGeoEditor.py:1321 appEditors/AppGeoEditor.py:1342 #: appEditors/AppGerberEditor.py:7387 appEditors/AppGerberEditor.py:7408 #: appPlugins/ToolTransform.py:259 appPlugins/ToolTransform.py:280 msgid "Scale transformation can not be done for a factor of 0 or 1." msgstr "" #: appEditors/AppGeoEditor.py:1355 appEditors/AppGeoEditor.py:1364 #: appEditors/AppGerberEditor.py:7421 appEditors/AppGerberEditor.py:7430 #: appPlugins/ToolTransform.py:293 appPlugins/ToolTransform.py:302 msgid "Offset transformation can not be done for a value of 0." msgstr "" #: appEditors/AppGeoEditor.py:1394 appPlugins/ToolTransform.py:330 msgid "Rotating" msgstr "" #: appEditors/AppGeoEditor.py:1409 appEditors/AppGeoEditor.py:1442 #: appEditors/AppGeoEditor.py:1476 appEditors/AppGeoEditor.py:1510 #: appEditors/AppGeoEditor.py:1543 appEditors/AppGeoEditor.py:1564 #: appEditors/AppGerberEditor.py:7481 appEditors/AppGerberEditor.py:7523 #: appEditors/AppGerberEditor.py:7563 appEditors/AppGerberEditor.py:7602 #: appEditors/AppGerberEditor.py:7646 appEditors/AppGerberEditor.py:7682 #: appPlugins/ToolTransform.py:352 appPlugins/ToolTransform.py:392 #: appPlugins/ToolTransform.py:431 appPlugins/ToolTransform.py:466 #: appPlugins/ToolTransform.py:503 appPlugins/ToolTransform.py:538 appMain.py:6976 #: appMain.py:7022 msgid "Action was not executed" msgstr "" #: appEditors/AppGeoEditor.py:1427 appPlugins/ToolTransform.py:362 msgid "Flipping" msgstr "" #: appEditors/AppGeoEditor.py:1435 appEditors/AppGerberEditor.py:7512 #: appPlugins/ToolTransform.py:379 appMain.py:6974 msgid "Flip on Y axis done" msgstr "" #: appEditors/AppGeoEditor.py:1438 appEditors/AppGerberEditor.py:7520 #: appPlugins/ToolTransform.py:388 appMain.py:7020 msgid "Flip on X axis done" msgstr "" #: appEditors/AppGeoEditor.py:1462 appPlugins/ToolTransform.py:407 msgid "Skewing" msgstr "" #: appEditors/AppGeoEditor.py:1471 appEditors/AppGerberEditor.py:7559 msgid "Skew on the X axis done" msgstr "" #: appEditors/AppGeoEditor.py:1473 appEditors/AppGerberEditor.py:7561 msgid "Skew on the Y axis done" msgstr "" #: appEditors/AppGeoEditor.py:1497 appPlugins/ToolTransform.py:441 msgid "Scaling" msgstr "" #: appEditors/AppGeoEditor.py:1506 appEditors/AppGerberEditor.py:7597 msgid "Scale on the X axis done" msgstr "" #: appEditors/AppGeoEditor.py:1508 appEditors/AppGerberEditor.py:7599 msgid "Scale on the Y axis done" msgstr "" #: appEditors/AppGeoEditor.py:1528 appPlugins/ToolTransform.py:476 msgid "Offsetting" msgstr "" #: appEditors/AppGeoEditor.py:1538 appEditors/AppGeoEditor.py:1596 #: appEditors/AppGerberEditor.py:7641 appEditors/AppGerberEditor.py:7714 #: appPlugins/ToolMarkers.py:1292 msgid "Offset on the X axis." msgstr "" #: appEditors/AppGeoEditor.py:1540 appEditors/AppGerberEditor.py:7643 #: appPlugins/ToolMarkers.py:1305 msgid "Offset on the Y axis." msgstr "" #: appEditors/AppGeoEditor.py:1553 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:56 #: appObjects/FlatCAMGerber.py:423 appPlugins/ToolCopperThieving.py:625 #: appPlugins/ToolCopperThieving.py:820 appPlugins/ToolCopperThieving.py:833 #: appPlugins/ToolIsolation.py:1618 appPlugins/ToolNCC.py:2016 appPlugins/ToolNCC.py:2043 #: appPlugins/ToolNCC.py:2151 appPlugins/ToolNCC.py:2164 appPlugins/ToolNCC.py:3065 #: appPlugins/ToolNCC.py:3170 appPlugins/ToolNCC.py:3185 appPlugins/ToolNCC.py:3453 #: appPlugins/ToolNCC.py:3554 appPlugins/ToolNCC.py:3569 appPlugins/ToolTransform.py:513 #: camlib.py:1167 msgid "Buffering" msgstr "" #: appEditors/AppGeoEditor.py:1560 appEditors/AppGerberEditor.py:7678 #: appPlugins/ToolTransform.py:534 msgid "Buffer done" msgstr "" #: appEditors/AppGeoEditor.py:1568 appEditors/AppGerberEditor.py:7686 msgid "Rotate ..." msgstr "" #: appEditors/AppGeoEditor.py:1569 appEditors/AppGeoEditor.py:1621 #: appEditors/AppGeoEditor.py:1637 appEditors/AppGerberEditor.py:7687 #: appEditors/AppGerberEditor.py:7739 appEditors/AppGerberEditor.py:7755 msgid "Enter an Angle Value (degrees)" msgstr "" #: appEditors/AppGeoEditor.py:1578 appEditors/AppGerberEditor.py:7696 #: appPlugins/ToolTransform.py:350 msgid "Rotate done" msgstr "" #: appEditors/AppGeoEditor.py:1581 appEditors/AppGerberEditor.py:7699 msgid "Rotate cancelled" msgstr "" #: appEditors/AppGeoEditor.py:1586 appEditors/AppGerberEditor.py:7704 msgid "Offset on X axis ..." msgstr "" #: appEditors/AppGeoEditor.py:1587 appEditors/AppGeoEditor.py:1605 #: appEditors/AppGerberEditor.py:7705 appEditors/AppGerberEditor.py:7723 msgid "Enter a distance Value" msgstr "" #: appEditors/AppGeoEditor.py:1599 appEditors/AppGerberEditor.py:7717 msgid "Offset X cancelled" msgstr "" #: appEditors/AppGeoEditor.py:1604 appEditors/AppGerberEditor.py:7722 msgid "Offset on Y axis ..." msgstr "" #: appEditors/AppGeoEditor.py:1614 appEditors/AppGerberEditor.py:7732 msgid "Offset on Y axis done" msgstr "" #: appEditors/AppGeoEditor.py:1617 msgid "Offset on the Y axis canceled" msgstr "" #: appEditors/AppGeoEditor.py:1620 appEditors/AppGerberEditor.py:7738 msgid "Skew on X axis ..." msgstr "" #: appEditors/AppGeoEditor.py:1630 appEditors/AppGerberEditor.py:7748 msgid "Skew on X axis done" msgstr "" #: appEditors/AppGeoEditor.py:1633 msgid "Skew on X axis canceled" msgstr "" #: appEditors/AppGeoEditor.py:1636 appEditors/AppGerberEditor.py:7754 msgid "Skew on Y axis ..." msgstr "" #: appEditors/AppGeoEditor.py:1646 appEditors/AppGerberEditor.py:7764 msgid "Skew on Y axis done" msgstr "" #: appEditors/AppGeoEditor.py:1649 msgid "Skew on Y axis canceled" msgstr "" #: appEditors/AppGeoEditor.py:2084 appEditors/AppGeoEditor.py:2156 #: appEditors/AppGerberEditor.py:1667 appEditors/AppGerberEditor.py:1750 msgid "Click on Center point ..." msgstr "" #: appEditors/AppGeoEditor.py:2097 appEditors/AppGerberEditor.py:1677 msgid "Click on Perimeter point to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:2184 appEditors/AppGerberEditor.py:1799 msgid "Click on Start point ..." msgstr "" #: appEditors/AppGeoEditor.py:2186 appEditors/AppGerberEditor.py:1801 msgid "Click on Point3 ..." msgstr "" #: appEditors/AppGeoEditor.py:2188 appEditors/AppGerberEditor.py:1803 msgid "Click on Stop point ..." msgstr "" #: appEditors/AppGeoEditor.py:2193 appEditors/AppGerberEditor.py:1808 msgid "Click on Stop point to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:2195 appEditors/AppGerberEditor.py:1810 msgid "Click on Point2 to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:2197 appEditors/AppGerberEditor.py:1812 msgid "Click on Center point to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:2223 appEditors/AppGerberEditor.py:1838 msgid "Mode: Start -> Stop -> Center. Click on Start point ..." msgstr "" #: appEditors/AppGeoEditor.py:2226 appEditors/AppGerberEditor.py:1841 msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..." msgstr "" #: appEditors/AppGeoEditor.py:2229 appEditors/AppGerberEditor.py:1844 msgid "Mode: Center -> Start -> Stop. Click on Center point ..." msgstr "" #: appEditors/AppGeoEditor.py:2401 appEditors/AppGeoEditor.py:2476 msgid "Click on 1st corner ..." msgstr "" #: appEditors/AppGeoEditor.py:2413 msgid "Click on opposite corner to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:2538 appEditors/AppGeoEditor.py:2604 #: appEditors/AppGerberEditor.py:1270 appEditors/AppGerberEditor.py:1524 msgid "Backtracked one point ..." msgstr "" #: appEditors/AppGeoEditor.py:2642 msgid "Selection not allowed. Wait ..." msgstr "" #: appEditors/AppGeoEditor.py:2826 msgid "Click on destination point ..." msgstr "" #: appEditors/AppGeoEditor.py:2856 appPlugins/ToolMove.py:199 msgid "Moving" msgstr "" #: appEditors/AppGeoEditor.py:3030 appEditors/AppGerberEditor.py:1019 msgid "Click on 1st point ..." msgstr "" #: appEditors/AppGeoEditor.py:3054 msgid "Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. Error" msgstr "" #: appEditors/AppGeoEditor.py:3062 msgid "No text to add." msgstr "" #: appEditors/AppGeoEditor.py:3109 msgid "Create buffer geometry ..." msgstr "" #: appEditors/AppGeoEditor.py:3245 appEditors/AppGerberEditor.py:2407 msgid "Select a shape to act as deletion area ..." msgstr "" #: appEditors/AppGeoEditor.py:3247 appEditors/AppGeoEditor.py:3273 #: appEditors/AppGeoEditor.py:3279 appEditors/AppGerberEditor.py:2409 msgid "Click to pick-up the erase shape..." msgstr "" #: appEditors/AppGeoEditor.py:3283 appEditors/AppGerberEditor.py:2469 msgid "Click to erase ..." msgstr "" #: appEditors/AppGeoEditor.py:3362 msgid "Create Paint geometry ..." msgstr "" #: appEditors/AppGeoEditor.py:3375 appEditors/AppGerberEditor.py:3270 msgid "Shape transformations ..." msgstr "" #: appEditors/AppGeoEditor.py:3438 appGUI/ObjectUI.py:980 msgid "Geometry Editor" msgstr "" #: appEditors/AppGeoEditor.py:3459 msgid "Tool dia" msgstr "" #: appEditors/AppGeoEditor.py:3461 msgid "Edited tool diameter." msgstr "" #: appEditors/AppGeoEditor.py:3471 msgid "Geometry Table" msgstr "" #: appEditors/AppGeoEditor.py:3473 msgid "The list of geometry elements inside the edited object." msgstr "" #: appEditors/AppGeoEditor.py:3502 appEditors/AppGerberEditor.py:6320 msgid "Zoom on selection" msgstr "" #: appEditors/AppGeoEditor.py:3511 appEditors/AppGerberEditor.py:6329 #: appGUI/ObjectUI.py:1372 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:26 #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:28 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:26 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:27 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:411 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:79 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:25 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:27 #: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:28 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:29 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:137 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:28 #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:28 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:27 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:27 #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:27 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:27 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:26 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:28 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:198 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:25 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:25 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:27 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:28 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:26 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:28 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:27 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:28 #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:24 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:28 #: appPlugins/ToolAlignObjects.py:508 appPlugins/ToolCalibration.py:787 #: appPlugins/ToolCopperThieving.py:1317 appPlugins/ToolDistance.py:699 #: appPlugins/ToolEtchCompensation.py:406 appPlugins/ToolFiducials.py:962 #: appPlugins/ToolFilm.py:1540 appPlugins/ToolFollow.py:732 #: appPlugins/ToolInvertGerber.py:257 appPlugins/ToolLevelling.py:1858 #: appPlugins/ToolMarkers.py:1209 appPlugins/ToolObjectDistance.py:460 #: appPlugins/ToolOptimal.py:525 appPlugins/ToolPanelize.py:1350 #: appPlugins/ToolQRCode.py:813 appPlugins/ToolSolderPaste.py:1320 appPlugins/ToolSub.py:821 #: appPlugins/ToolTransform.py:602 msgid "Parameters" msgstr "" #: appEditors/AppGeoEditor.py:3513 appEditors/AppGerberEditor.py:6331 msgid "Geometry parameters." msgstr "" #: appEditors/AppGeoEditor.py:3518 msgid "Is Valid" msgstr "" #: appEditors/AppGeoEditor.py:3525 msgid "Is Empty" msgstr "" #: appEditors/AppGeoEditor.py:3532 msgid "Is Ring" msgstr "" #: appEditors/AppGeoEditor.py:3539 msgid "Is CCW" msgstr "" #: appEditors/AppGeoEditor.py:3541 appEditors/AppGeoEditor.py:4196 msgid "Change" msgstr "" #: appEditors/AppGeoEditor.py:3544 msgid "" "Change the orientation of the geometric element.\n" "Works for LinearRing and Polygons." msgstr "" #: appEditors/AppGeoEditor.py:3552 msgid "Is Simple" msgstr "" #: appEditors/AppGeoEditor.py:3561 msgid "The length of the geometry element." msgstr "" #: appEditors/AppGeoEditor.py:3570 appEditors/AppGerberEditor.py:6363 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:83 appPlugins/ToolDistance.py:724 #: appPlugins/ToolFiducials.py:870 appPlugins/ToolFiducials.py:886 #: appPlugins/ToolObjectDistance.py:489 msgid "Coordinates" msgstr "" #: appEditors/AppGeoEditor.py:3572 appEditors/AppGeoEditor.py:3578 #: appEditors/AppGerberEditor.py:6365 appEditors/AppGerberEditor.py:6371 msgid "The coordinates of the selected geometry element." msgstr "" #: appEditors/AppGeoEditor.py:3583 appEditors/AppGerberEditor.py:6376 msgid "Vertex Points" msgstr "" #: appEditors/AppGeoEditor.py:3585 appEditors/AppGerberEditor.py:6378 msgid "The number of vertex points in the selected geometry element." msgstr "" #: appEditors/AppGeoEditor.py:3599 appEditors/AppGerberEditor.py:6392 #: appGUI/ObjectUI.py:1185 msgid "Simplification" msgstr "" #: appEditors/AppGeoEditor.py:3601 appEditors/AppGerberEditor.py:6394 #: appGUI/ObjectUI.py:1187 msgid "Simplify a geometry by reducing its vertex points number." msgstr "" #: appEditors/AppGeoEditor.py:3606 appEditors/AppGerberEditor.py:6399 #: appGUI/ObjectUI.py:1223 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:85 msgid "Tolerance" msgstr "" #: appEditors/AppGeoEditor.py:3608 appEditors/AppGerberEditor.py:6401 #: appGUI/ObjectUI.py:1225 msgid "" "All points in the simplified object will be\n" "within the tolerance distance of the original geometry." msgstr "" #: appEditors/AppGeoEditor.py:3620 appEditors/AppGeoEditor.py:4125 #: appEditors/AppGerberEditor.py:4136 appEditors/AppGerberEditor.py:6414 #: appGUI/ObjectUI.py:1237 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:76 #: appObjects/FlatCAMGeometry.py:512 msgid "Simplify" msgstr "" #: appEditors/AppGeoEditor.py:3623 appEditors/AppGerberEditor.py:6417 #: appGUI/ObjectUI.py:1240 msgid "Simplify a geometry element by reducing its vertex points number." msgstr "" #: appEditors/AppGeoEditor.py:3936 msgid "Ring" msgstr "" #: appEditors/AppGeoEditor.py:3938 appMain.py:8318 msgid "Line" msgstr "" #: appEditors/AppGeoEditor.py:3940 appGUI/MainGUI.py:1774 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:450 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:322 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:470 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:327 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:291 appPlugins/ToolDrilling.py:2989 #: appPlugins/ToolFollow.py:763 appPlugins/ToolIsolation.py:3899 #: appPlugins/ToolMilling.py:5055 appPlugins/ToolNCC.py:4603 appPlugins/ToolPaint.py:3354 msgid "Polygon" msgstr "" #: appEditors/AppGeoEditor.py:3942 msgid "Multi-Line" msgstr "" #: appEditors/AppGeoEditor.py:3944 msgid "Multi-Polygon" msgstr "" #: appEditors/AppGeoEditor.py:3951 msgid "Geo Elem" msgstr "" #: appEditors/AppGeoEditor.py:4064 msgid "Last selected shape ID" msgstr "" #: appEditors/AppGeoEditor.py:4156 appEditors/AppGerberEditor.py:2681 #: appEditors/AppGerberEditor.py:5004 appPlugins/ToolCutOut.py:1503 #: appPlugins/ToolDistance.py:205 appPlugins/ToolExtract.py:411 #: appPlugins/ToolExtract.py:784 appPlugins/ToolExtract.py:859 appPlugins/ToolOptimal.py:230 #: appPlugins/ToolPanelize.py:1118 appPlugins/ToolQRCode.py:253 appPlugins/ToolReport.py:224 #: appPlugins/ToolSolderPaste.py:734 appPlugins/ToolSolderPaste.py:1040 #: appPlugins/ToolSub.py:324 tclCommands/TclCommandOpenSVG.py:85 #: tclCommands/TclCommandPanelize.py:425 msgid "Working" msgstr "" #: appEditors/AppGeoEditor.py:4566 msgid "Error on inserting shapes into storage." msgstr "" #: appEditors/AppGeoEditor.py:4661 msgid "Grid Snap enabled." msgstr "" #: appEditors/AppGeoEditor.py:4666 msgid "Grid Snap disabled." msgstr "" #: appEditors/AppGeoEditor.py:5053 appGUI/MainGUI.py:3817 appGUI/MainGUI.py:3863 #: appGUI/MainGUI.py:3881 appGUI/MainGUI.py:4037 appGUI/MainGUI.py:4075 #: appGUI/MainGUI.py:4087 msgid "Click on target point." msgstr "" #: appEditors/AppGeoEditor.py:5343 appEditors/AppGeoEditor.py:5407 #: appEditors/AppGeoEditor.py:5475 appEditors/AppGeoEditor.py:5505 #: appEditors/AppGeoEditor.py:5558 appEditors/AppGeoEditor.py:5613 #: appEditors/AppGeoEditor.py:5641 appEditors/AppGeoEditor.py:5666 #: appEditors/AppGeoEditor.py:5696 appEditors/AppGeoEditor.py:5776 #: appEditors/AppGeoEditor.py:5842 appEditors/AppGeoEditor.py:5910 #: appPlugins/ToolCopperThieving.py:643 appPlugins/ToolFilm.py:701 #: appPlugins/ToolFilm.py:924 appPlugins/ToolRulesCheck.py:659 msgid "Working..." msgstr "" #: appEditors/AppGeoEditor.py:5344 msgid "Loading the Geometry into the Editor..." msgstr "" #: appEditors/AppGeoEditor.py:5383 msgid "Editing MultiGeo Geometry, tool" msgstr "" #: appEditors/AppGeoEditor.py:5385 appPlugins/ToolNCC.py:2512 msgid "with diameter" msgstr "" #: appEditors/AppGeoEditor.py:5454 msgid "Editor Exit. Geometry object was updated ..." msgstr "" #: appEditors/AppGeoEditor.py:5510 appEditors/AppGeoEditor.py:5565 msgid "A selection of minimum two items is required to do Intersection." msgstr "" #: appEditors/AppGeoEditor.py:5700 appEditors/AppGeoEditor.py:5846 msgid "" "Negative buffer value is not accepted. Use Buffer interior to generate an 'inside' shape" msgstr "" #: appEditors/AppGeoEditor.py:5710 appEditors/AppGeoEditor.py:5787 #: appEditors/AppGeoEditor.py:5855 appEditors/AppGeoEditor.py:5920 appMain.py:5900 msgid "Nothing selected." msgstr "" #: appEditors/AppGeoEditor.py:5714 appEditors/AppGeoEditor.py:5791 #: appEditors/AppGeoEditor.py:5859 msgid "Invalid distance." msgstr "" #: appEditors/AppGeoEditor.py:5759 appEditors/AppGeoEditor.py:5825 #: appEditors/AppGeoEditor.py:5893 msgid "Failed, the result is empty." msgstr "" #: appEditors/AppGeoEditor.py:5780 msgid "Negative buffer value is not accepted." msgstr "" #: appEditors/AppGeoEditor.py:5913 #, python-format msgid "Could not do Paint. Overlap value has to be less than 100%%." msgstr "" #: appEditors/AppGeoEditor.py:5926 msgid "Invalid value for" msgstr "" #: appEditors/AppGeoEditor.py:5988 appPlugins/ToolMilling.py:3336 #: appPlugins/ToolPaint.py:2005 appPlugins/ToolPaint.py:2215 msgid "" "Could not do Paint. Try a different combination of parameters. Or a different method of " "Paint" msgstr "" #: appEditors/AppGerberEditor.py:212 appEditors/AppGerberEditor.py:418 #: appEditors/AppGerberEditor.py:1347 msgid "You need to preselect a aperture in the Aperture Table that has a size." msgstr "" #: appEditors/AppGerberEditor.py:225 appEditors/AppGerberEditor.py:428 msgid "Aperture size is zero. It needs to be greater than zero." msgstr "" #: appEditors/AppGerberEditor.py:378 appEditors/AppGerberEditor.py:734 msgid "Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'." msgstr "" #: appEditors/AppGerberEditor.py:500 msgid "Click on the Pad Circular Array Start position" msgstr "" #: appEditors/AppGerberEditor.py:864 msgid "Select shape(s) and then click ..." msgstr "" #: appEditors/AppGerberEditor.py:876 msgid "Failed. Nothing selected." msgstr "" #: appEditors/AppGerberEditor.py:892 msgid "Failed. Poligonize works only on geometries belonging to the same aperture." msgstr "" #: appEditors/AppGerberEditor.py:1017 appEditors/AppGerberEditor.py:1287 #: appEditors/AppGerberEditor.py:1311 msgid "Corner Mode 1: 45 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1275 appEditors/AppGerberEditor.py:1308 msgid "Corner Mode 2: Reverse 45 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1278 appEditors/AppGerberEditor.py:1305 msgid "Corner Mode 3: 90 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1281 appEditors/AppGerberEditor.py:1302 msgid "Corner Mode 4: Reverse 90 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1284 appEditors/AppGerberEditor.py:1299 msgid "Corner Mode 5: Free angle ..." msgstr "" #: appEditors/AppGerberEditor.py:1379 appEditors/AppGerberEditor.py:1564 #: appEditors/AppGerberEditor.py:1603 msgid "Track Mode 1: 45 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1544 appEditors/AppGerberEditor.py:1598 msgid "Track Mode 2: Reverse 45 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1549 appEditors/AppGerberEditor.py:1593 msgid "Track Mode 3: 90 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1554 appEditors/AppGerberEditor.py:1588 msgid "Track Mode 4: Reverse 90 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1559 appEditors/AppGerberEditor.py:1583 msgid "Track Mode 5: Free angle ..." msgstr "" #: appEditors/AppGerberEditor.py:2035 msgid "Scale the selected Gerber apertures ..." msgstr "" #: appEditors/AppGerberEditor.py:2077 msgid "Buffer the selected apertures ..." msgstr "" #: appEditors/AppGerberEditor.py:2119 msgid "Mark polygon areas in the edited Gerber ..." msgstr "" #: appEditors/AppGerberEditor.py:2185 msgid "Nothing selected to move" msgstr "" #: appEditors/AppGerberEditor.py:2861 msgid "Select shapes to import them into the edited object." msgstr "" #: appEditors/AppGerberEditor.py:3090 appEditors/AppGerberEditor.py:3172 #: appPlugins/ToolIsolation.py:2491 appPlugins/ToolIsolation.py:2656 #: appPlugins/ToolPaint.py:1283 msgid "Added polygon" msgstr "" #: appEditors/AppGerberEditor.py:3092 appEditors/AppGerberEditor.py:3174 #: appPlugins/ToolIsolation.py:2492 appPlugins/ToolIsolation.py:2658 #: appPlugins/ToolPaint.py:1285 msgid "Click to add next polygon or right click to start." msgstr "" #: appEditors/AppGerberEditor.py:3095 appEditors/AppGerberEditor.py:3177 #: appPlugins/ToolIsolation.py:2661 msgid "No polygon in selection." msgstr "" #: appEditors/AppGerberEditor.py:3779 appEditors/AppGerberEditor.py:3783 msgid "Aperture code value is missing or wrong format. Add it and retry." msgstr "" #: appEditors/AppGerberEditor.py:3795 msgid "Aperture size value is missing or wrong format. Add it and retry." msgstr "" #: appEditors/AppGerberEditor.py:3814 appEditors/AppGerberEditor.py:3855 msgid "Aperture already in the aperture table." msgstr "" #: appEditors/AppGerberEditor.py:3841 msgid "" "Aperture dimensions value is missing or wrong format. Add it in format (width, height) " "and retry." msgstr "" #: appEditors/AppGerberEditor.py:3862 msgid "Added new aperture with code" msgstr "" #: appEditors/AppGerberEditor.py:3897 msgid "Select an aperture in Aperture Table" msgstr "" #: appEditors/AppGerberEditor.py:3905 msgid "Select an aperture in Aperture Table -->" msgstr "" #: appEditors/AppGerberEditor.py:3923 msgid "Deleted aperture with code" msgstr "" #: appEditors/AppGerberEditor.py:3993 msgid "Dimensions need two float values separated by comma." msgstr "" #: appEditors/AppGerberEditor.py:4002 msgid "Dimensions edited." msgstr "" #: appEditors/AppGerberEditor.py:4593 appEditors/AppGerberEditor.py:6182 #: appEditors/AppGerberEditor.py:6227 appGUI/ObjectUI.py:334 appPlugins/ToolExtract.py:1077 #: appPlugins/ToolPunchGerber.py:2107 msgid "Code" msgstr "" #: appEditors/AppGerberEditor.py:4593 appEditors/AppGerberEditor.py:6182 #: appGUI/ObjectUI.py:334 msgid "Dim" msgstr "" #: appEditors/AppGerberEditor.py:4712 appObjects/FlatCAMCNCJob.py:769 #: appObjects/FlatCAMScript.py:131 appPlugins/ToolLevelling.py:1519 appMain.py:8220 msgid "Loading" msgstr "" #: appEditors/AppGerberEditor.py:4852 msgid "Setting up the UI" msgstr "" #: appEditors/AppGerberEditor.py:4853 msgid "Adding geometry finished. Preparing the GUI" msgstr "" #: appEditors/AppGerberEditor.py:4862 msgid "Finished loading the Gerber object into the editor." msgstr "" #: appEditors/AppGerberEditor.py:4994 msgid "There are no Aperture definitions in the file. Aborting Gerber creation." msgstr "" #: appEditors/AppGerberEditor.py:5032 msgid "No aperture is selected." msgstr "" #: appEditors/AppGerberEditor.py:5253 appObjects/FlatCAMExcellon.py:552 #: appPlugins/ToolDrilling.py:1720 appPlugins/ToolMilling.py:3817 appMain.py:7603 #: appMain.py:7625 msgid "Copied to clipboard." msgstr "" #: appEditors/AppGerberEditor.py:5601 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:352 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:340 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:305 appObjects/AppObject.py:353 #: appObjects/FlatCAMCNCJob.py:663 appObjects/FlatCAMGerber.py:1039 #: appObjects/FlatCAMObj.py:187 appObjects/FlatCAMObj.py:361 appObjects/FlatCAMObj.py:392 #: appObjects/FlatCAMObj.py:408 appPlugins/ToolCopperThieving.py:1172 #: appPlugins/ToolFiducials.py:685 appPlugins/ToolMarkers.py:1010 appPlugins/ToolMove.py:170 #: appPlugins/ToolQRCode.py:551 appMain.py:5343 msgid "Plotting" msgstr "" #: appEditors/AppGerberEditor.py:5781 msgid "Failed. No aperture geometry is selected." msgstr "" #: appEditors/AppGerberEditor.py:5956 msgid "No aperture to buffer. Select at least one aperture and try again." msgstr "" #: appEditors/AppGerberEditor.py:5987 msgid "Scale factor value is missing or wrong format. Add it and retry." msgstr "" #: appEditors/AppGerberEditor.py:6019 msgid "No aperture to scale. Select at least one aperture and try again." msgstr "" #: appEditors/AppGerberEditor.py:6071 msgid "Polygons marked." msgstr "" #: appEditors/AppGerberEditor.py:6073 msgid "No polygons were marked. None fit within the limits." msgstr "" #: appEditors/AppGerberEditor.py:6136 appGUI/MainGUI.py:779 appGUI/MainGUI.py:1807 #: appGUI/ObjectUI.py:244 msgid "Gerber Editor" msgstr "" #: appEditors/AppGerberEditor.py:6169 appGUI/ObjectUI.py:299 appObjects/FlatCAMObj.py:549 #: appPlugins/ToolReport.py:187 msgid "Apertures" msgstr "" #: appEditors/AppGerberEditor.py:6171 appGUI/ObjectUI.py:301 msgid "Apertures Table for the Gerber Object." msgstr "" #: appEditors/AppGerberEditor.py:6187 appGUI/ObjectUI.py:338 msgid "Index" msgstr "" #: appEditors/AppGerberEditor.py:6189 appGUI/ObjectUI.py:340 appPlugins/ToolExtract.py:1084 #: appPlugins/ToolPunchGerber.py:2114 msgid "Aperture Code" msgstr "" #: appEditors/AppGerberEditor.py:6191 appGUI/ObjectUI.py:342 appPlugins/ToolExtract.py:1086 #: appPlugins/ToolPunchGerber.py:2116 msgid "Type of aperture: circular, rectangle, macros etc" msgstr "" #: appEditors/AppGerberEditor.py:6193 appGUI/ObjectUI.py:344 appPlugins/ToolExtract.py:1088 #: appPlugins/ToolPunchGerber.py:2118 msgid "Aperture Size:" msgstr "" #: appEditors/AppGerberEditor.py:6195 appGUI/ObjectUI.py:346 msgid "" "Aperture Dimensions:\n" " - (width, height) for R, O type.\n" " - (dia, nVertices) for P type" msgstr "" #: appEditors/AppGerberEditor.py:6220 msgid "Add/Delete Aperture" msgstr "" #: appEditors/AppGerberEditor.py:6222 msgid "Add/Delete an aperture in the aperture table" msgstr "" #: appEditors/AppGerberEditor.py:6228 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:59 msgid "Code for the new aperture" msgstr "" #: appEditors/AppGerberEditor.py:6238 msgid "Size:" msgstr "" #: appEditors/AppGerberEditor.py:6240 msgid "" "Size for the new aperture.\n" "If aperture type is 'R' or 'O' then\n" "this value is automatically\n" "calculated as:\n" "sqrt(width**2 + height**2)" msgstr "" #: appEditors/AppGerberEditor.py:6257 msgid "" "Select the type of new aperture. Can be:\n" "C = circular\n" "R = rectangular\n" "O = oblong" msgstr "" #: appEditors/AppGerberEditor.py:6270 msgid "Dims" msgstr "" #: appEditors/AppGerberEditor.py:6272 msgid "" "Dimensions for the new aperture.\n" "The format is (width, height)" msgstr "" #: appEditors/AppGerberEditor.py:6294 msgid "Add a new aperture to the aperture list." msgstr "" #: appEditors/AppGerberEditor.py:6303 msgid "Delete a aperture in the aperture list" msgstr "" #: appEditors/AppGerberEditor.py:6338 msgid "Valid" msgstr "" #: appEditors/AppGerberEditor.py:6340 msgid "Show if the selected polygon is valid." msgstr "" #: appEditors/AppGerberEditor.py:6347 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:83 #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:124 #: appPlugins/ToolCalculators.py:695 appPlugins/ToolCalculators.py:740 #: appPlugins/ToolCopperThieving.py:1357 msgid "Area" msgstr "" #: appEditors/AppGerberEditor.py:6349 msgid "Show the area of the selected polygon." msgstr "" #: appEditors/AppGerberEditor.py:6353 #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:46 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:198 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:45 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:41 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:102 appPlugins/ToolCalculators.py:552 #: appPlugins/ToolCopperThieving.py:1369 appPlugins/ToolPcbWizard.py:497 msgid "mm" msgstr "" #: appEditors/AppGerberEditor.py:6353 appPlugins/ToolCopperThieving.py:1371 #: appPlugins/ToolCopperThieving.py:1746 msgid "in" msgstr "" #: appEditors/AppGerberEditor.py:6440 msgid "Buffer Aperture" msgstr "" #: appEditors/AppGerberEditor.py:6442 msgid "Buffer a aperture in the aperture list" msgstr "" #: appEditors/AppGerberEditor.py:6461 msgid "" "There are 3 types of corners:\n" " - 'Round': the corner is rounded.\n" " - 'Square': the corner is met in a sharp angle.\n" " - 'Beveled': the corner is a line that directly connects the features meeting in the " "corner" msgstr "" #: appEditors/AppGerberEditor.py:6498 msgid "Scale Aperture" msgstr "" #: appEditors/AppGerberEditor.py:6500 msgid "Scale a aperture in the aperture list" msgstr "" #: appEditors/AppGerberEditor.py:6508 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:251 msgid "Scale factor" msgstr "" #: appEditors/AppGerberEditor.py:6510 msgid "" "The factor by which to scale the selected aperture.\n" "Values can be between 0.0000 and 999.9999" msgstr "" #: appEditors/AppGerberEditor.py:6547 msgid "Mark polygons" msgstr "" #: appEditors/AppGerberEditor.py:6549 msgid "Mark the polygon areas." msgstr "" #: appEditors/AppGerberEditor.py:6558 msgid "Area UPPER threshold" msgstr "" #: appEditors/AppGerberEditor.py:6560 msgid "" "The threshold value, all areas less than this are marked.\n" "Can have a value between 0.0000 and 10000.0000" msgstr "" #: appEditors/AppGerberEditor.py:6571 msgid "Area LOWER threshold" msgstr "" #: appEditors/AppGerberEditor.py:6573 msgid "" "The threshold value, all areas more than this are marked.\n" "Can have a value between 0.0000 and 10000.0000" msgstr "" #: appEditors/AppGerberEditor.py:6587 msgid "Mark" msgstr "" #: appEditors/AppGerberEditor.py:6590 msgid "Mark the polygons that fit within limits." msgstr "" #: appEditors/AppGerberEditor.py:6597 msgid "Delete all the marked polygons." msgstr "" #: appEditors/AppGerberEditor.py:6604 msgid "Clear all the markings." msgstr "" #: appEditors/AppGerberEditor.py:6627 appGUI/MainGUI.py:787 appGUI/MainGUI.py:1270 #: appGUI/MainGUI.py:2634 appGUI/MainGUI.py:5395 msgid "Add Pad Array" msgstr "" #: appEditors/AppGerberEditor.py:6629 msgid "Add an array of pads (linear or circular array)" msgstr "" #: appEditors/AppGerberEditor.py:6636 msgid "" "Select the type of pads array to create.\n" "It can be Linear X(Y) or Circular" msgstr "" #: appEditors/AppGerberEditor.py:6647 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:96 msgid "Nr of pads" msgstr "" #: appEditors/AppGerberEditor.py:6649 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:98 msgid "Specify how many pads to be in the array." msgstr "" #: appEditors/AppGerberEditor.py:7467 msgid "Appying Rotate" msgstr "" #: appEditors/AppGerberEditor.py:7500 msgid "Applying Flip" msgstr "" #: appEditors/AppGerberEditor.py:7543 msgid "Applying Skew" msgstr "" #: appEditors/AppGerberEditor.py:7584 msgid "Applying Scale" msgstr "" #: appEditors/AppGerberEditor.py:7620 msgid "Applying Offset" msgstr "" #: appEditors/AppGerberEditor.py:7656 msgid "Applying Buffer" msgstr "" #: appEditors/AppGerberEditor.py:7735 msgid "Offset Y cancelled" msgstr "" #: appEditors/AppGerberEditor.py:7751 msgid "Skew X cancelled" msgstr "" #: appEditors/AppGerberEditor.py:7767 msgid "Skew Y cancelled" msgstr "" #: appEditors/AppTextEditor.py:87 appEditors/AppTextEditor.py:344 appGUI/GUIElements.py:4372 msgid "Find" msgstr "" #: appEditors/AppTextEditor.py:89 msgid "Will search and highlight in yellow the string in the Find box." msgstr "" #: appEditors/AppTextEditor.py:94 appEditors/AppTextEditor.py:95 msgid "Find box. Enter here the strings to be searched in the text." msgstr "" #: appEditors/AppTextEditor.py:99 msgid "Replace With" msgstr "" #: appEditors/AppTextEditor.py:101 msgid "Will replace the string from the Find box with the one in the Replace box." msgstr "" #: appEditors/AppTextEditor.py:106 appEditors/AppTextEditor.py:107 msgid "String to replace the one in the Find box throughout the text." msgstr "" #: appEditors/AppTextEditor.py:111 appEditors/appGCodeEditor.py:160 #: appGUI/GUIElements.py:5236 appGUI/ObjectUI.py:1310 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:59 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:309 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279 appPlugins/ToolExtract.py:1025 #: appPlugins/ToolFollow.py:750 appPlugins/ToolIsolation.py:3832 #: appPlugins/ToolPaint.py:3316 appPlugins/ToolPunchGerber.py:2056 msgid "All" msgstr "" #: appEditors/AppTextEditor.py:112 msgid "" "When checked it will replace all instances in the 'Find' box\n" "with the text in the 'Replace' box.." msgstr "" #: appEditors/AppTextEditor.py:125 msgid "Save changes internally." msgstr "" #: appEditors/AppTextEditor.py:132 msgid "Open a OS standard Preview Print window." msgstr "" #: appEditors/AppTextEditor.py:138 msgid "Open a OS standard Print window." msgstr "" #: appEditors/AppTextEditor.py:144 msgid "Will open a text file in the editor." msgstr "" #: appEditors/AppTextEditor.py:150 msgid "Will save the text in the editor into a file." msgstr "" #: appEditors/AppTextEditor.py:154 msgid "Run" msgstr "" #: appEditors/AppTextEditor.py:155 msgid "Will run the TCL commands found in the text file, one by one." msgstr "" #: appEditors/AppTextEditor.py:224 appEditors/appGCodeEditor.py:704 msgid "Open file" msgstr "" #: appEditors/AppTextEditor.py:255 appEditors/AppTextEditor.py:261 #: appObjects/FlatCAMCNCJob.py:693 appObjects/FlatCAMCNCJob.py:699 #: appPlugins/ToolLevelling.py:1485 appPlugins/ToolLevelling.py:1491 #: appPlugins/ToolLevelling.py:1677 appPlugins/ToolLevelling.py:1683 #: appPlugins/ToolSolderPaste.py:1146 appMain.py:8132 appMain.py:8138 msgid "Export Code ..." msgstr "" #: appEditors/AppTextEditor.py:316 appObjects/FlatCAMCNCJob.py:748 #: appObjects/FlatCAMCNCJob.py:1175 appPlugins/ToolLevelling.py:1509 #: appPlugins/ToolLevelling.py:1701 appPlugins/ToolSolderPaste.py:1175 msgid "No such file or directory" msgstr "" #: appEditors/AppTextEditor.py:328 appObjects/FlatCAMCNCJob.py:1189 msgid "Saved to" msgstr "" #: appEditors/AppTextEditor.py:342 msgid "End of document." msgstr "" #: appEditors/AppTextEditor.py:343 msgid "Start from beginning?" msgstr "" #: appEditors/AppTextEditor.py:350 appGUI/GUIElements.py:2716 appGUI/GUIElements.py:2786 #: appGUI/GUIElements.py:2847 appGUI/GUIElements.py:2912 appGUI/GUIElements.py:4306 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:417 appMain.py:4986 appMain.py:5154 #: appMain.py:5245 appMain.py:9752 appMain.py:10106 msgid "Ok" msgstr "" #: appEditors/appGCodeEditor.py:76 appGUI/GUIElements.py:4380 appGUI/MainGUI.py:169 #: appGUI/MainGUI.py:351 appGUI/MainGUI.py:4901 appGUI/MainGUI.py:5162 #: appGUI/MainGUI.py:5271 appGUI/MainGUI.py:5414 msgid "Ctrl+S" msgstr "" #: appEditors/appGCodeEditor.py:82 appMain.py:8295 msgid "Code Editor" msgstr "" #: appEditors/appGCodeEditor.py:166 msgid "Header" msgstr "" #: appEditors/appGCodeEditor.py:172 msgid "Start" msgstr "" #: appEditors/appGCodeEditor.py:266 msgid "All GCode" msgstr "" #: appEditors/appGCodeEditor.py:272 msgid "Header GCode" msgstr "" #: appEditors/appGCodeEditor.py:278 msgid "Start GCode" msgstr "" #: appEditors/appGCodeEditor.py:679 appObjects/FlatCAMCNCJob.py:821 #: appPlugins/ToolCalibration.py:482 msgid "Loaded Machine Code into Code Editor" msgstr "" #: appEditors/appGCodeEditor.py:771 appGUI/ObjectUI.py:1330 #: appPlugins/ToolSolderPaste.py:1061 msgid "GCode Editor" msgstr "" #: appEditors/appGCodeEditor.py:809 appEditors/appGCodeEditor.py:820 msgid "GCode" msgstr "" #: appEditors/appGCodeEditor.py:820 appGUI/ObjectUI.py:741 appGUI/ObjectUI.py:1493 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:587 appObjects/FlatCAMObj.py:556 #: appPlugins/ToolDrilling.py:2470 appPlugins/ToolMilling.py:4065 #: appPlugins/ToolMilling.py:4325 appPlugins/ToolReport.py:194 msgid "Drills" msgstr "" #: appEditors/appGCodeEditor.py:820 appGUI/ObjectUI.py:741 appGUI/ObjectUI.py:1493 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:176 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:588 appObjects/FlatCAMObj.py:558 #: appPlugins/ToolDrilling.py:2470 appPlugins/ToolMilling.py:4065 #: appPlugins/ToolMilling.py:4326 appPlugins/ToolReport.py:196 msgid "Slots" msgstr "" #: appEditors/appGCodeEditor.py:840 appEditors/appGCodeEditor.py:862 msgid "CNC Code Snippet" msgstr "" #: appEditors/appGCodeEditor.py:842 appEditors/appGCodeEditor.py:864 msgid "Code snippet defined in Preferences." msgstr "" #: appEditors/appGCodeEditor.py:848 appEditors/appGCodeEditor.py:870 msgid "" "Type here any G-Code commands you would\n" "like to insert at the cursor location." msgstr "" #: appEditors/appGCodeEditor.py:854 appEditors/appGCodeEditor.py:876 msgid "Insert Code" msgstr "" #: appEditors/appGCodeEditor.py:857 appEditors/appGCodeEditor.py:879 msgid "Insert the code above at the cursor location." msgstr "" #: appGUI/GUIElements.py:427 appGUI/GUIElements.py:1182 appGUI/GUIElements.py:1586 msgid "Read Only" msgstr "" #: appGUI/GUIElements.py:432 appGUI/GUIElements.py:1187 appGUI/GUIElements.py:1591 #: appGUI/GUIElements.py:1849 appGUI/GUIElements.py:2143 appGUI/GUIElements.py:4338 msgid "Undo" msgstr "" #: appGUI/GUIElements.py:432 appGUI/GUIElements.py:1187 appGUI/GUIElements.py:1591 #: appGUI/GUIElements.py:1849 appGUI/GUIElements.py:2143 appGUI/GUIElements.py:4338 msgid "Ctrl+Z" msgstr "" #: appGUI/GUIElements.py:439 appGUI/GUIElements.py:1194 appGUI/GUIElements.py:1598 #: appGUI/GUIElements.py:1856 appGUI/GUIElements.py:2148 appGUI/GUIElements.py:4343 msgid "Redo" msgstr "" #: appGUI/GUIElements.py:439 appGUI/GUIElements.py:1194 appGUI/GUIElements.py:1598 #: appGUI/GUIElements.py:1856 appGUI/GUIElements.py:2148 appGUI/GUIElements.py:4343 msgid "Ctrl+Y" msgstr "" #: appGUI/GUIElements.py:448 appGUI/GUIElements.py:1203 appGUI/GUIElements.py:1607 #: appGUI/GUIElements.py:1865 appGUI/GUIElements.py:2155 appGUI/GUIElements.py:4350 #: appGUI/MainGUI.py:1798 appGUI/ObjectUI.py:1312 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:61 msgid "Cut" msgstr "" #: appGUI/GUIElements.py:448 appGUI/GUIElements.py:1203 appGUI/GUIElements.py:1607 #: appGUI/GUIElements.py:1865 appGUI/GUIElements.py:2155 appGUI/GUIElements.py:4350 #: appGUI/MainGUI.py:5163 msgid "Ctrl+X" msgstr "" #: appGUI/GUIElements.py:455 appGUI/GUIElements.py:1210 appGUI/GUIElements.py:1614 #: appGUI/GUIElements.py:1872 appGUI/GUIElements.py:2160 appGUI/GUIElements.py:4355 #: appGUI/MainGUI.py:422 appGUI/MainGUI.py:765 appGUI/MainGUI.py:824 appGUI/MainGUI.py:905 #: appGUI/MainGUI.py:1048 appGUI/MainGUI.py:1298 appGUI/MainGUI.py:1855 #: appGUI/MainGUI.py:2420 appGUI/MainGUI.py:2662 appGUI/MainGUI.py:5397 #: appObjects/FlatCAMExcellon.py:516 appPlugins/ToolDrilling.py:309 #: appPlugins/ToolMilling.py:428 appPlugins/ToolMilling.py:439 #: appPlugins/ToolPanelize.py:461 appPlugins/ToolPanelize.py:490 #: appPlugins/ToolPanelize.py:616 appPlugins/ToolPanelize.py:627 #: appPlugins/ToolPanelize.py:665 appPlugins/ToolPanelize.py:714 #: appPlugins/ToolPanelize.py:928 appPlugins/ToolPanelize.py:967 #: appPlugins/ToolPanelize.py:1015 msgid "Copy" msgstr "" #: appGUI/GUIElements.py:455 appGUI/GUIElements.py:1210 appGUI/GUIElements.py:1614 #: appGUI/GUIElements.py:1872 appGUI/GUIElements.py:2160 appGUI/GUIElements.py:4355 #: appGUI/MainGUI.py:422 appGUI/MainGUI.py:4892 msgid "Ctrl+C" msgstr "" #: appGUI/GUIElements.py:462 appGUI/GUIElements.py:1217 appGUI/GUIElements.py:1621 #: appGUI/GUIElements.py:1879 appGUI/GUIElements.py:2165 msgid "Paste" msgstr "" #: appGUI/GUIElements.py:462 appGUI/GUIElements.py:1217 appGUI/GUIElements.py:1621 #: appGUI/GUIElements.py:1879 appGUI/GUIElements.py:2165 msgid "Ctrl+V" msgstr "" #: appGUI/GUIElements.py:469 appGUI/GUIElements.py:1224 appGUI/GUIElements.py:1628 #: appGUI/GUIElements.py:1884 appGUI/GUIElements.py:2170 appGUI/GUIElements.py:4360 #: appGUI/MainGUI.py:4962 appGUI/MainGUI.py:4963 appGUI/MainGUI.py:5167 #: appGUI/MainGUI.py:5267 appGUI/MainGUI.py:5268 appGUI/MainGUI.py:5408 #: appGUI/MainGUI.py:5409 msgid "Del" msgstr "" #: appGUI/GUIElements.py:478 appGUI/GUIElements.py:1233 appGUI/GUIElements.py:1637 #: appGUI/GUIElements.py:1891 appGUI/GUIElements.py:2177 appGUI/GUIElements.py:4367 #: appGUI/MainGUI.py:459 appGUI/MainGUI.py:594 appGUI/MainGUI.py:4891 #: appObjects/ObjectCollection.py:1170 appObjects/ObjectCollection.py:1217 #: appPlugins/ToolIsolation.py:3872 appPlugins/ToolPunchGerber.py:2334 #: appPlugins/ToolRulesCheck.py:1200 msgid "Select All" msgstr "" #: appGUI/GUIElements.py:478 appGUI/GUIElements.py:1233 appGUI/GUIElements.py:1637 #: appGUI/GUIElements.py:1891 appGUI/GUIElements.py:2177 appGUI/GUIElements.py:4367 #: appGUI/MainGUI.py:459 appGUI/MainGUI.py:4891 msgid "Ctrl+A" msgstr "" #: appGUI/GUIElements.py:1240 appGUI/GUIElements.py:1644 msgid "Step Up" msgstr "" #: appGUI/GUIElements.py:1247 appGUI/GUIElements.py:1651 msgid "Step Down" msgstr "" #: appGUI/GUIElements.py:4269 msgid "" "The reference can be:\n" "- Absolute -> the reference point is point (0,0)\n" "- Relative -> the reference point is the mouse position before Jump" msgstr "" #: appGUI/GUIElements.py:4274 msgid "Abs" msgstr "" #: appGUI/GUIElements.py:4275 msgid "Relative" msgstr "" #: appGUI/GUIElements.py:4286 msgid "Location" msgstr "" #: appGUI/GUIElements.py:4288 msgid "" "The Location value is a tuple (x,y).\n" "If the reference is Absolute then the Jump will be at the position (x,y).\n" "If the reference is Relative then the Jump will be at the (x,y) distance\n" "from the current position (in some cases, last mouse click position).\n" "WARNING: comma is a separator between values." msgstr "" #: appGUI/GUIElements.py:4372 msgid "Ctrl+F" msgstr "" #: appGUI/GUIElements.py:4380 msgid "Save Log" msgstr "" #: appGUI/GUIElements.py:4386 msgid "Clear All" msgstr "" #: appGUI/GUIElements.py:4386 msgid "Shift+Del" msgstr "" #: appGUI/GUIElements.py:4505 appPlugins/ToolShell.py:327 msgid "Type >help< to get started" msgstr "" #: appGUI/GUIElements.py:5133 appGUI/GUIElements.py:5150 msgid "Jog the Y axis." msgstr "" #: appGUI/GUIElements.py:5141 appGUI/MainGUI.py:440 appGUI/MainGUI.py:1059 #: appGUI/MainGUI.py:2431 msgid "Move to Origin" msgstr "" #: appGUI/GUIElements.py:5158 appGUI/GUIElements.py:5166 msgid "Jog the X axis." msgstr "" #: appGUI/GUIElements.py:5176 appGUI/GUIElements.py:5186 msgid "Jog the Z axis." msgstr "" #: appGUI/GUIElements.py:5210 msgid "Zero the CNC X axes at current position." msgstr "" #: appGUI/GUIElements.py:5218 msgid "Zero the CNC Y axes at current position." msgstr "" #: appGUI/GUIElements.py:5223 msgid "Z" msgstr "" #: appGUI/GUIElements.py:5226 msgid "Zero the CNC Z axes at current position." msgstr "" #: appGUI/GUIElements.py:5230 msgid "Do Home" msgstr "" #: appGUI/GUIElements.py:5232 msgid "Perform a homing cycle on all axis." msgstr "" #: appGUI/GUIElements.py:5241 msgid "Zero all CNC axes at current position." msgstr "" #: appGUI/GUIElements.py:5397 appGUI/GUIElements.py:5406 msgid "Idle." msgstr "" #: appGUI/GUIElements.py:5449 msgid "Application started ..." msgstr "" #: appGUI/GUIElements.py:5450 msgid "Hello!" msgstr "" #: appGUI/GUIElements.py:5514 msgid "Run Script ..." msgstr "" #: appGUI/GUIElements.py:5516 appGUI/MainGUI.py:204 msgid "" "Will run the opened Tcl Script thus\n" "enabling the automation of certain\n" "functions of FlatCAM." msgstr "" #: appGUI/GUIElements.py:5524 msgid "Toggle GUI ..." msgstr "" #: appGUI/GUIElements.py:5526 msgid "Will show/hide the GUI." msgstr "" #: appGUI/GUIElements.py:5533 appGUI/MainGUI.py:126 appPlugins/ToolPcbWizard.py:427 #: appPlugins/ToolPcbWizard.py:435 msgid "Open" msgstr "" #: appGUI/GUIElements.py:5537 appGUI/MainGUI.py:131 appGUI/MainGUI.py:1022 #: appGUI/MainGUI.py:2394 appGUI/MainGUI.py:4898 appMain.py:9651 appMain.py:9654 msgid "Open Project" msgstr "" #: appGUI/GUIElements.py:5543 appGUI/MainGUI.py:138 appGUI/MainGUI.py:1017 #: appGUI/MainGUI.py:2389 appMain.py:9534 appMain.py:9539 msgid "Open Gerber" msgstr "" #: appGUI/GUIElements.py:5543 appGUI/MainGUI.py:138 appGUI/MainGUI.py:4895 msgid "Ctrl+G" msgstr "" #: appGUI/GUIElements.py:5548 appGUI/MainGUI.py:143 appGUI/MainGUI.py:1019 #: appGUI/MainGUI.py:2391 appMain.py:9573 appMain.py:9578 msgid "Open Excellon" msgstr "" #: appGUI/GUIElements.py:5548 appGUI/MainGUI.py:143 appGUI/MainGUI.py:816 #: appGUI/MainGUI.py:4894 appGUI/MainGUI.py:5413 msgid "Ctrl+E" msgstr "" #: appGUI/GUIElements.py:5553 appGUI/MainGUI.py:148 appMain.py:9615 appMain.py:9620 msgid "Open G-Code" msgstr "" #: appGUI/GUIElements.py:5563 appGUI/MainGUI.py:335 msgid "Exit" msgstr "" #: appGUI/MainGUI.py:75 appGUI/MainGUI.py:77 appGUI/MainGUI.py:1689 msgid "Toggle Panel" msgstr "" #: appGUI/MainGUI.py:87 msgid "File" msgstr "" #: appGUI/MainGUI.py:92 appGUI/MainGUI.py:4897 msgid "New Project" msgstr "" #: appGUI/MainGUI.py:92 appGUI/MainGUI.py:4897 msgid "Ctrl+N" msgstr "" #: appGUI/MainGUI.py:94 msgid "Will create a new, blank project" msgstr "" #: appGUI/MainGUI.py:99 appGUI/MainGUI.py:1700 appPlugins/ToolLevelling.py:2092 msgid "New" msgstr "" #: appGUI/MainGUI.py:103 appGUI/MainGUI.py:1546 appGUI/MainGUI.py:1702 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:76 #: appObjects/ObjectCollection.py:243 appPlugins/ToolCalibration.py:206 #: appPlugins/ToolCalibration.py:1351 appPlugins/ToolCalibration.py:1368 #: appPlugins/ToolCopperThieving.py:212 appPlugins/ToolCopperThieving.py:1398 #: appPlugins/ToolCopperThieving.py:1409 appPlugins/ToolCutOut.py:2308 #: appPlugins/ToolCutOut.py:2730 appPlugins/ToolDblSided.py:755 #: appPlugins/ToolDblSided.py:970 appPlugins/ToolFilm.py:1292 appPlugins/ToolFilm.py:1315 #: appPlugins/ToolImage.py:182 appPlugins/ToolImage.py:333 appPlugins/ToolIsolation.py:3792 #: appPlugins/ToolIsolation.py:3843 appPlugins/ToolMarkers.py:1489 #: appPlugins/ToolMilling.py:2787 appPlugins/ToolMilling.py:2952 #: appPlugins/ToolMilling.py:4003 appPlugins/ToolNCC.py:4116 appPlugins/ToolNCC.py:4580 #: appPlugins/ToolPaint.py:3330 appPlugins/ToolPanelize.py:150 #: appPlugins/ToolPanelize.py:258 appPlugins/ToolPanelize.py:1199 #: appPlugins/ToolPanelize.py:1250 appPlugins/ToolSolderPaste.py:1582 #: appPlugins/ToolSub.py:906 appPlugins/ToolTransform.py:160 appPlugins/ToolTransform.py:654 msgid "Geometry" msgstr "" #: appGUI/MainGUI.py:103 appGUI/MainGUI.py:678 appGUI/MainGUI.py:793 appGUI/MainGUI.py:4877 #: appGUI/MainGUI.py:5146 appGUI/MainGUI.py:5402 msgid "N" msgstr "" #: appGUI/MainGUI.py:105 msgid "Will create a new, empty Geometry Object." msgstr "" #: appGUI/MainGUI.py:108 appGUI/MainGUI.py:1524 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:94 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:74 #: appObjects/ObjectCollection.py:241 appPlugins/ToolAlignObjects.py:448 #: appPlugins/ToolAlignObjects.py:487 appPlugins/ToolCalibration.py:198 #: appPlugins/ToolCalibration.py:206 appPlugins/ToolCalibration.py:916 #: appPlugins/ToolCalibration.py:1351 appPlugins/ToolCalibration.py:1368 #: appPlugins/ToolCopperThieving.py:212 appPlugins/ToolCopperThieving.py:1398 #: appPlugins/ToolCopperThieving.py:1409 appPlugins/ToolCutOut.py:2307 #: appPlugins/ToolDblSided.py:755 appPlugins/ToolDblSided.py:968 appPlugins/ToolFilm.py:1291 #: appPlugins/ToolFilm.py:1314 appPlugins/ToolImage.py:160 appPlugins/ToolImage.py:184 #: appPlugins/ToolImage.py:333 appPlugins/ToolIsolation.py:3793 #: appPlugins/ToolIsolation.py:3843 appPlugins/ToolMarkers.py:1488 #: appPlugins/ToolNCC.py:4117 appPlugins/ToolNCC.py:4580 appPlugins/ToolPaint.py:3330 #: appPlugins/ToolPanelize.py:144 appPlugins/ToolPanelize.py:258 #: appPlugins/ToolPanelize.py:1199 appPlugins/ToolPanelize.py:1250 #: appPlugins/ToolPanelize.py:1361 appPlugins/ToolRulesCheck.py:1210 #: appPlugins/ToolSub.py:841 appPlugins/ToolTransform.py:160 appPlugins/ToolTransform.py:652 #: defaults.py:623 msgid "Gerber" msgstr "" #: appGUI/MainGUI.py:108 appGUI/MainGUI.py:721 appGUI/MainGUI.py:807 appGUI/MainGUI.py:4871 #: appGUI/MainGUI.py:5137 appGUI/MainGUI.py:5396 msgid "B" msgstr "" #: appGUI/MainGUI.py:110 msgid "Will create a new, empty Gerber Object." msgstr "" #: appGUI/MainGUI.py:113 appGUI/MainGUI.py:1535 appGUI/MainGUI.py:1706 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:98 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:75 #: appObjects/ObjectCollection.py:242 appPlugins/ToolAlignObjects.py:449 #: appPlugins/ToolAlignObjects.py:488 appPlugins/ToolCalibration.py:198 #: appPlugins/ToolCalibration.py:206 appPlugins/ToolCalibration.py:917 #: appPlugins/ToolCalibration.py:1351 appPlugins/ToolCalibration.py:1368 #: appPlugins/ToolCopperThieving.py:212 appPlugins/ToolCopperThieving.py:1398 #: appPlugins/ToolCopperThieving.py:1409 appPlugins/ToolDblSided.py:755 #: appPlugins/ToolDblSided.py:969 appPlugins/ToolDblSided.py:997 appPlugins/ToolFilm.py:1645 #: appPlugins/ToolIsolation.py:3843 appPlugins/ToolMilling.py:4004 #: appPlugins/ToolNCC.py:4580 appPlugins/ToolPaint.py:3330 appPlugins/ToolPanelize.py:147 #: appPlugins/ToolPanelize.py:258 appPlugins/ToolPanelize.py:1199 #: appPlugins/ToolPunchGerber.py:2149 appPlugins/ToolPunchGerber.py:2163 #: appPlugins/ToolRulesCheck.py:1217 appPlugins/ToolRulesCheck.py:1415 #: appPlugins/ToolTransform.py:160 appPlugins/ToolTransform.py:653 msgid "Excellon" msgstr "" #: appGUI/MainGUI.py:113 appGUI/MainGUI.py:4875 msgid "L" msgstr "" #: appGUI/MainGUI.py:115 msgid "Will create a new, empty Excellon Object." msgstr "" #: appGUI/MainGUI.py:120 appObjects/ObjectCollection.py:246 msgid "Document" msgstr "" #: appGUI/MainGUI.py:120 appGUI/MainGUI.py:748 appGUI/MainGUI.py:804 appGUI/MainGUI.py:5139 #: appGUI/MainGUI.py:5259 appGUI/MainGUI.py:5398 msgid "D" msgstr "" #: appGUI/MainGUI.py:122 msgid "Will create a new, empty Document Object." msgstr "" #: appGUI/MainGUI.py:131 appGUI/MainGUI.py:4898 msgid "Ctrl+O" msgstr "" #: appGUI/MainGUI.py:155 msgid "Open Config" msgstr "" #: appGUI/MainGUI.py:160 msgid "Recent projects" msgstr "" #: appGUI/MainGUI.py:162 msgid "Recent files" msgstr "" #: appGUI/MainGUI.py:165 appGUI/MainGUI.py:909 appGUI/MainGUI.py:1659 #: appGUI/ObjectUI.py:1544 appObjects/ObjectCollection.py:390 msgid "Save" msgstr "" #: appGUI/MainGUI.py:169 appGUI/MainGUI.py:2396 appGUI/MainGUI.py:4901 msgid "Save Project" msgstr "" #: appGUI/MainGUI.py:175 appGUI/MainGUI.py:4953 msgid "Save Project As" msgstr "" #: appGUI/MainGUI.py:175 appGUI/MainGUI.py:4953 msgid "Ctrl+Shift+S" msgstr "" #: appGUI/MainGUI.py:190 msgid "Scripting" msgstr "" #: appGUI/MainGUI.py:194 appGUI/MainGUI.py:1090 appGUI/MainGUI.py:2460 msgid "New Script" msgstr "" #: appGUI/MainGUI.py:196 appGUI/MainGUI.py:1092 appGUI/MainGUI.py:2462 msgid "Open Script" msgstr "" #: appGUI/MainGUI.py:199 msgid "Open Example" msgstr "" #: appGUI/MainGUI.py:202 appGUI/MainGUI.py:1094 appGUI/MainGUI.py:2464 msgid "Run Script" msgstr "" #: appGUI/MainGUI.py:202 appGUI/MainGUI.py:4914 msgid "Shift+S" msgstr "" #: appGUI/MainGUI.py:219 msgid "Import" msgstr "" #: appGUI/MainGUI.py:222 msgid "SVG as Geometry Object" msgstr "" #: appGUI/MainGUI.py:226 msgid "SVG as Gerber Object" msgstr "" #: appGUI/MainGUI.py:232 msgid "DXF as Geometry Object" msgstr "" #: appGUI/MainGUI.py:236 msgid "DXF as Gerber Object" msgstr "" #: appGUI/MainGUI.py:241 msgid "HPGL2 as Geometry Object" msgstr "" #: appGUI/MainGUI.py:247 appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:19 #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:19 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:20 appPlugins/ToolFilm.py:1680 msgid "Export" msgstr "" #: appGUI/MainGUI.py:252 appPlugins/ToolQRCode.py:654 appPlugins/ToolQRCode.py:659 #: appMain.py:9762 appMain.py:9767 msgid "Export SVG" msgstr "" #: appGUI/MainGUI.py:257 appMain.py:10116 appMain.py:10121 msgid "Export DXF" msgstr "" #: appGUI/MainGUI.py:264 appPlugins/ToolQRCode.py:605 appPlugins/ToolQRCode.py:610 msgid "Export PNG" msgstr "" #: appGUI/MainGUI.py:266 msgid "" "Will export an image in PNG format,\n" "the saved image will contain the visual \n" "information currently in FlatCAM Plot Area." msgstr "" #: appGUI/MainGUI.py:276 appMain.py:10013 appMain.py:10018 msgid "Export Excellon" msgstr "" #: appGUI/MainGUI.py:278 msgid "" "Will export an Excellon Object as Excellon file,\n" "the coordinates format, the file units and zeros\n" "are set in Preferences -> Excellon Export." msgstr "" #: appGUI/MainGUI.py:286 appMain.py:10058 appMain.py:10063 msgid "Export Gerber" msgstr "" #: appGUI/MainGUI.py:288 msgid "" "Will export an Gerber Object as Gerber file,\n" "the coordinates format, the file units and zeros\n" "are set in Preferences -> Gerber Export." msgstr "" #: appGUI/MainGUI.py:298 msgid "Backup" msgstr "" #: appGUI/MainGUI.py:303 msgid "Import Preferences from file" msgstr "" #: appGUI/MainGUI.py:310 msgid "Export Preferences to file" msgstr "" #: appGUI/MainGUI.py:319 appGUI/preferences/PreferencesUIManager.py:1301 msgid "Save Preferences" msgstr "" #: appGUI/MainGUI.py:326 appGUI/MainGUI.py:4899 msgid "Print (PDF)" msgstr "" #: appGUI/MainGUI.py:326 appGUI/MainGUI.py:4899 msgid "Ctrl+P" msgstr "" #: appGUI/MainGUI.py:343 appGUI/MainGUI.py:903 appGUI/MainGUI.py:1859 msgid "Edit" msgstr "" #: appGUI/MainGUI.py:348 msgid "Edit Object" msgstr "" #: appGUI/MainGUI.py:348 appGUI/MainGUI.py:693 appGUI/MainGUI.py:801 appGUI/MainGUI.py:4872 #: appGUI/MainGUI.py:5140 appGUI/MainGUI.py:5399 msgid "E" msgstr "" #: appGUI/MainGUI.py:361 msgid "Conversion" msgstr "" #: appGUI/MainGUI.py:365 msgid "Convert Single to MultiGeo" msgstr "" #: appGUI/MainGUI.py:367 msgid "" "Will convert a Geometry object from single_geometry type\n" "to a multi_geometry type." msgstr "" #: appGUI/MainGUI.py:372 msgid "Convert Multi to SingleGeo" msgstr "" #: appGUI/MainGUI.py:374 msgid "" "Will convert a Geometry object from multi_geometry type\n" "to a single_geometry type." msgstr "" #: appGUI/MainGUI.py:381 msgid "Convert Any to Geo" msgstr "" #: appGUI/MainGUI.py:384 msgid "Convert Any to Gerber" msgstr "" #: appGUI/MainGUI.py:387 msgid "Convert Any to Excellon" msgstr "" #: appGUI/MainGUI.py:392 msgid "Join Objects" msgstr "" #: appGUI/MainGUI.py:395 msgid "Join Geo/Gerber/Exc -> Geo" msgstr "" #: appGUI/MainGUI.py:397 msgid "" "Merge a selection of objects, which can be of type:\n" "- Gerber\n" "- Excellon\n" "- Geometry\n" "into a new combo Geometry object." msgstr "" #: appGUI/MainGUI.py:405 msgid "Join Excellon(s) -> Excellon" msgstr "" #: appGUI/MainGUI.py:407 msgid "Merge a selection of Excellon objects into a new combo Excellon object." msgstr "" #: appGUI/MainGUI.py:411 msgid "Join Gerber(s) -> Gerber" msgstr "" #: appGUI/MainGUI.py:413 msgid "Merge a selection of Gerber objects into a new combo Gerber object." msgstr "" #: appGUI/MainGUI.py:428 appGUI/MainGUI.py:713 appGUI/MainGUI.py:768 appGUI/MainGUI.py:827 msgid "DEL" msgstr "" #: appGUI/MainGUI.py:434 appGUI/MainGUI.py:1866 msgid "Num Move" msgstr "" #: appGUI/MainGUI.py:437 appGUI/MainGUI.py:1057 appGUI/MainGUI.py:2429 #: appGUI/MainGUI.py:4878 msgid "Set Origin" msgstr "" #: appGUI/MainGUI.py:437 appGUI/MainGUI.py:666 appGUI/MainGUI.py:4878 appGUI/MainGUI.py:5147 msgid "O" msgstr "" #: appGUI/MainGUI.py:440 msgid "Shift+O" msgstr "" #: appGUI/MainGUI.py:443 appGUI/MainGUI.py:1061 appGUI/MainGUI.py:2433 appMain.py:5547 #: appMain.py:5561 msgid "Custom Origin" msgstr "" #: appGUI/MainGUI.py:447 appGUI/MainGUI.py:1064 appGUI/MainGUI.py:2436 msgid "Jump to Location" msgstr "" #: appGUI/MainGUI.py:447 appGUI/MainGUI.py:4874 appGUI/MainGUI.py:5142 #: appGUI/MainGUI.py:5260 appGUI/MainGUI.py:5400 msgid "J" msgstr "" #: appGUI/MainGUI.py:450 appGUI/MainGUI.py:1066 appGUI/MainGUI.py:2438 #: appGUI/MainGUI.py:4910 msgid "Locate in Object" msgstr "" #: appGUI/MainGUI.py:450 appGUI/MainGUI.py:4910 msgid "Shift+J" msgstr "" #: appGUI/MainGUI.py:456 appMain.py:4976 msgid "Toggle Units" msgstr "" #: appGUI/MainGUI.py:456 appGUI/MainGUI.py:753 appGUI/MainGUI.py:4879 appGUI/MainGUI.py:5262 msgid "Q" msgstr "" #: appGUI/MainGUI.py:465 appGUI/MainGUI.py:1359 #: appGUI/preferences/PreferencesUIManager.py:1042 #: appGUI/preferences/PreferencesUIManager.py:1140 #: appGUI/preferences/PreferencesUIManager.py:1251 #: appGUI/preferences/PreferencesUIManager.py:1339 appMain.py:6518 appMain.py:6523 #: appMain.py:6543 msgid "Preferences" msgstr "" #: appGUI/MainGUI.py:465 appGUI/MainGUI.py:4912 msgid "Shift+P" msgstr "" #: appGUI/MainGUI.py:471 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:21 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:20 #: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:21 #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:23 appObjects/FlatCAMObj.py:545 #: appPlugins/ToolReport.py:183 msgid "Options" msgstr "" #: appGUI/MainGUI.py:474 msgid "Rotate Selection" msgstr "" #: appGUI/MainGUI.py:474 msgid "Shift+(R)" msgstr "" #: appGUI/MainGUI.py:480 appGUI/MainGUI.py:4916 msgid "Skew on X axis" msgstr "" #: appGUI/MainGUI.py:480 appGUI/MainGUI.py:4916 appGUI/MainGUI.py:5156 msgid "Shift+X" msgstr "" #: appGUI/MainGUI.py:483 appGUI/MainGUI.py:4917 msgid "Skew on Y axis" msgstr "" #: appGUI/MainGUI.py:483 appGUI/MainGUI.py:4917 appGUI/MainGUI.py:5157 msgid "Shift+Y" msgstr "" #: appGUI/MainGUI.py:489 msgid "Flip on X axis" msgstr "" #: appGUI/MainGUI.py:492 msgid "Flip on Y axis" msgstr "" #: appGUI/MainGUI.py:498 msgid "View source" msgstr "" #: appGUI/MainGUI.py:498 appGUI/MainGUI.py:4938 msgid "Alt+S" msgstr "" #: appGUI/MainGUI.py:501 appGUI/MainGUI.py:4893 msgid "Ctrl+D" msgstr "" #: appGUI/MainGUI.py:507 msgid "Experimental" msgstr "" #: appGUI/MainGUI.py:511 appMain.py:6701 msgid "3D Area" msgstr "" #: appGUI/MainGUI.py:518 appGUI/MainGUI.py:1685 msgid "View" msgstr "" #: appGUI/MainGUI.py:521 appGUI/MainGUI.py:4943 msgid "Enable all" msgstr "" #: appGUI/MainGUI.py:521 appGUI/MainGUI.py:4943 msgid "Alt+1" msgstr "" #: appGUI/MainGUI.py:524 appGUI/MainGUI.py:4944 msgid "Disable all" msgstr "" #: appGUI/MainGUI.py:524 appGUI/MainGUI.py:4944 msgid "Alt+2" msgstr "" #: appGUI/MainGUI.py:527 msgid "Enable non-selected" msgstr "" #: appGUI/MainGUI.py:527 appGUI/MainGUI.py:4945 msgid "Alt+3" msgstr "" #: appGUI/MainGUI.py:530 msgid "Disable non-selected" msgstr "" #: appGUI/MainGUI.py:530 appGUI/MainGUI.py:4946 msgid "Alt+4" msgstr "" #: appGUI/MainGUI.py:536 appGUI/MainGUI.py:1080 appGUI/MainGUI.py:1692 #: appGUI/MainGUI.py:2452 appGUI/MainGUI.py:4884 msgid "Zoom Fit" msgstr "" #: appGUI/MainGUI.py:536 appGUI/MainGUI.py:4884 msgid "V" msgstr "" #: appGUI/MainGUI.py:539 appGUI/MainGUI.py:1076 appGUI/MainGUI.py:2448 #: appGUI/MainGUI.py:4888 msgid "Zoom In" msgstr "" #: appGUI/MainGUI.py:539 appGUI/MainGUI.py:4888 msgid "=" msgstr "" #: appGUI/MainGUI.py:542 appGUI/MainGUI.py:1078 appGUI/MainGUI.py:2450 #: appGUI/MainGUI.py:4887 msgid "Zoom Out" msgstr "" #: appGUI/MainGUI.py:542 appGUI/MainGUI.py:4887 msgid "-" msgstr "" #: appGUI/MainGUI.py:548 msgid "Redraw All" msgstr "" #: appGUI/MainGUI.py:548 appGUI/MainGUI.py:4961 msgid "F5" msgstr "" #: appGUI/MainGUI.py:553 appGUI/MainGUI.py:4907 msgid "Toggle Code Editor" msgstr "" #: appGUI/MainGUI.py:553 appGUI/MainGUI.py:4907 msgid "Shift+E" msgstr "" #: appGUI/MainGUI.py:557 msgid "Toggle FullScreen" msgstr "" #: appGUI/MainGUI.py:557 appGUI/MainGUI.py:4947 msgid "Alt+F10" msgstr "" #: appGUI/MainGUI.py:560 appGUI/MainGUI.py:4902 msgid "Toggle Plot Area" msgstr "" #: appGUI/MainGUI.py:560 appGUI/MainGUI.py:4902 msgid "Ctrl+F10" msgstr "" #: appGUI/MainGUI.py:563 msgid "Toggle Project/Properties/Tool" msgstr "" #: appGUI/MainGUI.py:563 appGUI/MainGUI.py:4964 msgid "`" msgstr "" #: appGUI/MainGUI.py:568 msgid "Toggle Grid Snap" msgstr "" #: appGUI/MainGUI.py:568 appGUI/MainGUI.py:4873 msgid "G" msgstr "" #: appGUI/MainGUI.py:571 appGUI/MainGUI.py:4908 msgid "Toggle Grid Lines" msgstr "" #: appGUI/MainGUI.py:571 appGUI/MainGUI.py:4908 msgid "Shift+G" msgstr "" #: appGUI/MainGUI.py:574 msgid "Toggle Axis" msgstr "" #: appGUI/MainGUI.py:574 appGUI/MainGUI.py:4905 msgid "Shift+A" msgstr "" #: appGUI/MainGUI.py:577 msgid "Toggle Workspace" msgstr "" #: appGUI/MainGUI.py:577 appGUI/MainGUI.py:4915 msgid "Shift+W" msgstr "" #: appGUI/MainGUI.py:580 appGUI/MainGUI.py:4909 msgid "Toggle HUD" msgstr "" #: appGUI/MainGUI.py:580 appGUI/MainGUI.py:4909 msgid "Shift+H" msgstr "" #: appGUI/MainGUI.py:585 msgid "Log" msgstr "" #: appGUI/MainGUI.py:590 msgid "Objects" msgstr "" #: appGUI/MainGUI.py:597 appObjects/ObjectCollection.py:1174 #: appObjects/ObjectCollection.py:1221 appPlugins/ToolIsolation.py:3878 #: appPlugins/ToolPunchGerber.py:2340 msgid "Deselect All" msgstr "" #: appGUI/MainGUI.py:602 appGUI/ObjectUI.py:374 appGUI/ObjectUI.py:780 #: appGUI/ObjectUI.py:1106 appGUI/ObjectUI.py:1513 msgid "Plugins" msgstr "" #: appGUI/MainGUI.py:606 appGUI/MainGUI.py:1088 appGUI/MainGUI.py:2458 msgid "Command Line" msgstr "" #: appGUI/MainGUI.py:606 appGUI/MainGUI.py:696 appGUI/MainGUI.py:810 appGUI/MainGUI.py:4882 #: appGUI/MainGUI.py:5150 appGUI/MainGUI.py:5405 msgid "S" msgstr "" #: appGUI/MainGUI.py:611 msgid "Help" msgstr "" #: appGUI/MainGUI.py:614 msgid "Online Help" msgstr "" #: appGUI/MainGUI.py:614 appGUI/MainGUI.py:4958 msgid "F1" msgstr "" #: appGUI/MainGUI.py:621 appMain.py:3946 appMain.py:3955 msgid "Bookmarks Manager" msgstr "" #: appGUI/MainGUI.py:626 msgid "Report a bug" msgstr "" #: appGUI/MainGUI.py:630 msgid "Excellon Specification" msgstr "" #: appGUI/MainGUI.py:633 msgid "Gerber Specification" msgstr "" #: appGUI/MainGUI.py:639 msgid "Shortcuts List" msgstr "" #: appGUI/MainGUI.py:639 appGUI/MainGUI.py:4867 msgid "F3" msgstr "" #: appGUI/MainGUI.py:642 msgid "YouTube Channel" msgstr "" #: appGUI/MainGUI.py:642 appGUI/MainGUI.py:4960 msgid "F4" msgstr "" #: appGUI/MainGUI.py:648 msgid "Donate" msgstr "" #: appGUI/MainGUI.py:652 appMain.py:3723 msgid "How To" msgstr "" #: appGUI/MainGUI.py:656 appMain.py:3214 msgid "About" msgstr "" #: appGUI/MainGUI.py:661 appGUI/MainGUI.py:1765 msgid "Geo Editor" msgstr "" #: appGUI/MainGUI.py:666 appGUI/MainGUI.py:1208 appGUI/MainGUI.py:2578 msgid "Add Circle" msgstr "" #: appGUI/MainGUI.py:670 appGUI/MainGUI.py:1210 appGUI/MainGUI.py:2580 msgid "Add Arc" msgstr "" #: appGUI/MainGUI.py:670 appGUI/MainGUI.py:745 appGUI/MainGUI.py:787 appGUI/MainGUI.py:5136 #: appGUI/MainGUI.py:5257 appGUI/MainGUI.py:5395 msgid "A" msgstr "" #: appGUI/MainGUI.py:674 appGUI/MainGUI.py:1212 appGUI/MainGUI.py:2582 msgid "Add Rectangle" msgstr "" #: appGUI/MainGUI.py:674 appGUI/MainGUI.py:761 appGUI/MainGUI.py:4881 appGUI/MainGUI.py:5149 #: appGUI/MainGUI.py:5263 appGUI/MainGUI.py:5404 msgid "R" msgstr "" #: appGUI/MainGUI.py:678 appGUI/MainGUI.py:1218 appGUI/MainGUI.py:2588 msgid "Add Polygon" msgstr "" #: appGUI/MainGUI.py:682 appGUI/MainGUI.py:1216 appGUI/MainGUI.py:2586 msgid "Add Path" msgstr "" #: appGUI/MainGUI.py:682 appGUI/MainGUI.py:784 appGUI/MainGUI.py:4880 appGUI/MainGUI.py:5148 #: appGUI/MainGUI.py:5403 appGUI/ObjectUI.py:1483 appGUI/ObjectUI.py:1494 msgid "P" msgstr "" #: appGUI/MainGUI.py:686 appGUI/MainGUI.py:1221 appGUI/MainGUI.py:2591 msgid "Add Text" msgstr "" #: appGUI/MainGUI.py:686 appGUI/MainGUI.py:790 appGUI/MainGUI.py:4883 appGUI/MainGUI.py:5151 #: appGUI/MainGUI.py:5264 appGUI/MainGUI.py:5406 appGUI/MainGUI.py:5407 msgid "T" msgstr "" #: appGUI/MainGUI.py:690 appGUI/MainGUI.py:1231 appGUI/MainGUI.py:2601 msgid "Polygon Union" msgstr "" #: appGUI/MainGUI.py:690 appGUI/MainGUI.py:5152 msgid "U" msgstr "" #: appGUI/MainGUI.py:693 appGUI/MainGUI.py:1236 appGUI/MainGUI.py:2606 msgid "Polygon Intersection" msgstr "" #: appGUI/MainGUI.py:696 appGUI/MainGUI.py:2608 msgid "Polygon Subtraction" msgstr "" #: appGUI/MainGUI.py:700 appGUI/MainGUI.py:1796 appGUI/MainGUI.py:2610 msgid "Alt Subtraction" msgstr "" #: appGUI/MainGUI.py:705 appGUI/MainGUI.py:1250 appGUI/MainGUI.py:2614 msgid "Cut Path" msgstr "" #: appGUI/MainGUI.py:710 msgid "Copy Geom" msgstr "" #: appGUI/MainGUI.py:710 appGUI/MainGUI.py:765 appGUI/MainGUI.py:824 appGUI/MainGUI.py:5138 #: appGUI/MainGUI.py:5258 appGUI/MainGUI.py:5397 msgid "C" msgstr "" #: appGUI/MainGUI.py:713 appGUI/MainGUI.py:1255 appGUI/MainGUI.py:2618 #: appGUI/MainGUI.py:5167 msgid "Delete Shape" msgstr "" #: appGUI/MainGUI.py:718 appGUI/MainGUI.py:832 appGUI/MainGUI.py:1305 appGUI/MainGUI.py:1804 #: appGUI/MainGUI.py:1870 appGUI/MainGUI.py:2669 appGUI/MainGUI.py:5401 #: appPlugins/ToolMove.py:27 msgid "Move" msgstr "" #: appGUI/MainGUI.py:718 appGUI/MainGUI.py:774 appGUI/MainGUI.py:832 appGUI/MainGUI.py:4876 #: appGUI/MainGUI.py:5144 appGUI/MainGUI.py:5145 appGUI/MainGUI.py:5261 #: appGUI/MainGUI.py:5401 msgid "M" msgstr "" #: appGUI/MainGUI.py:725 appGUI/MainGUI.py:5141 msgid "I" msgstr "" #: appGUI/MainGUI.py:729 appGUI/MainGUI.py:819 appGUI/MainGUI.py:4937 appGUI/MainGUI.py:5158 #: appGUI/MainGUI.py:5417 msgid "Alt+R" msgstr "" #: appGUI/MainGUI.py:734 appGUI/MainGUI.py:5143 msgid "Toggle Corner Snap" msgstr "" #: appGUI/MainGUI.py:734 appGUI/MainGUI.py:5143 msgid "K" msgstr "" #: appGUI/MainGUI.py:748 appGUI/MainGUI.py:1182 appGUI/MainGUI.py:1842 #: appGUI/MainGUI.py:2552 appGUI/MainGUI.py:5259 msgid "Add Drill" msgstr "" #: appGUI/MainGUI.py:753 appGUI/MainGUI.py:1188 appGUI/MainGUI.py:1849 #: appGUI/MainGUI.py:2560 appGUI/MainGUI.py:5262 msgid "Add Slot Array" msgstr "" #: appGUI/MainGUI.py:756 appGUI/MainGUI.py:1186 appGUI/MainGUI.py:1847 #: appGUI/MainGUI.py:2558 appGUI/MainGUI.py:5265 msgid "Add Slot" msgstr "" #: appGUI/MainGUI.py:756 appGUI/MainGUI.py:5265 msgid "W" msgstr "" #: appGUI/MainGUI.py:761 msgid "Resize Drill(S)" msgstr "" #: appGUI/MainGUI.py:774 appGUI/MainGUI.py:1200 appGUI/MainGUI.py:2570 #: appGUI/MainGUI.py:5261 msgid "Move Drill" msgstr "" #: appGUI/MainGUI.py:784 appGUI/MainGUI.py:1268 appGUI/MainGUI.py:2632 #: appGUI/MainGUI.py:5403 msgid "Add Pad" msgstr "" #: appGUI/MainGUI.py:790 appGUI/MainGUI.py:1272 appGUI/MainGUI.py:2636 #: appGUI/MainGUI.py:5406 msgid "Add Track" msgstr "" #: appGUI/MainGUI.py:793 appGUI/MainGUI.py:1274 appGUI/MainGUI.py:2638 #: appGUI/MainGUI.py:5402 msgid "Add Region" msgstr "" #: appGUI/MainGUI.py:798 appGUI/MainGUI.py:1276 appGUI/MainGUI.py:1819 #: appGUI/MainGUI.py:2640 msgid "Poligonize" msgstr "" #: appGUI/MainGUI.py:798 appGUI/MainGUI.py:4933 appGUI/MainGUI.py:5416 msgid "Alt+N" msgstr "" #: appGUI/MainGUI.py:801 appGUI/MainGUI.py:5399 msgid "Add SemiDisc" msgstr "" #: appGUI/MainGUI.py:804 appGUI/MainGUI.py:5398 msgid "Add Disc" msgstr "" #: appGUI/MainGUI.py:813 appGUI/MainGUI.py:1289 appGUI/MainGUI.py:1831 #: appGUI/MainGUI.py:2653 msgid "Mark Area" msgstr "" #: appGUI/MainGUI.py:813 appGUI/MainGUI.py:4920 appGUI/MainGUI.py:5415 msgid "Alt+A" msgstr "" #: appGUI/MainGUI.py:816 appGUI/MainGUI.py:1227 appGUI/MainGUI.py:1294 #: appGUI/MainGUI.py:1786 appGUI/MainGUI.py:1833 appGUI/MainGUI.py:2597 #: appGUI/MainGUI.py:2658 msgid "Eraser" msgstr "" #: appGUI/MainGUI.py:819 appMain.py:7045 appMain.py:7099 appMain.py:7147 msgid "Transform" msgstr "" #: appGUI/MainGUI.py:849 msgid "Enable Plot" msgstr "" #: appGUI/MainGUI.py:851 msgid "Disable Plot" msgstr "" #: appGUI/MainGUI.py:855 appGUI/MainGUI.py:1720 msgid "Set Color" msgstr "" #: appGUI/MainGUI.py:858 appGUI/MainGUI.py:1723 appMain.py:9083 msgid "Red" msgstr "" #: appGUI/MainGUI.py:861 appGUI/MainGUI.py:1726 appMain.py:9085 msgid "Blue" msgstr "" #: appGUI/MainGUI.py:864 appGUI/MainGUI.py:1729 appMain.py:9088 msgid "Yellow" msgstr "" #: appGUI/MainGUI.py:867 appGUI/MainGUI.py:1732 appMain.py:9090 msgid "Green" msgstr "" #: appGUI/MainGUI.py:870 appGUI/MainGUI.py:1735 appMain.py:9092 msgid "Purple" msgstr "" #: appGUI/MainGUI.py:873 appGUI/MainGUI.py:1738 appMain.py:9094 msgid "Brown" msgstr "" #: appGUI/MainGUI.py:876 appGUI/MainGUI.py:1741 appMain.py:9096 msgid "Indigo" msgstr "" #: appGUI/MainGUI.py:879 appGUI/MainGUI.py:1744 appMain.py:9098 appMain.py:9176 msgid "White" msgstr "" #: appGUI/MainGUI.py:882 appGUI/MainGUI.py:1747 appMain.py:9100 msgid "Black" msgstr "" #: appGUI/MainGUI.py:892 appGUI/MainGUI.py:1757 appMain.py:9141 msgid "Opacity" msgstr "" #: appGUI/MainGUI.py:895 appGUI/MainGUI.py:1760 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:48 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:65 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:67 appPlugins/ToolDrilling.py:2494 #: appPlugins/ToolIsolation.py:3418 appPlugins/ToolMilling.py:4160 #: appPlugins/ToolNCC.py:4199 appPlugins/ToolPaint.py:3072 appMain.py:9115 msgid "Default" msgstr "" #: appGUI/MainGUI.py:900 msgid "View Source" msgstr "" #: appGUI/MainGUI.py:913 appGUI/MainGUI.py:926 appGUI/MainGUI.py:1442 appGUI/MainGUI.py:1872 #: appMain.py:2690 appMain.py:2958 appMain.py:8577 msgid "Properties" msgstr "" #: appGUI/MainGUI.py:926 appGUI/MainGUI.py:1426 appGUI/MainGUI.py:1709 appMain.py:2696 #: appMain.py:2961 appMain.py:10572 msgid "Project" msgstr "" #: appGUI/MainGUI.py:943 msgid "File Toolbar" msgstr "" #: appGUI/MainGUI.py:948 msgid "Edit Toolbar" msgstr "" #: appGUI/MainGUI.py:953 msgid "View Toolbar" msgstr "" #: appGUI/MainGUI.py:958 msgid "Shell Toolbar" msgstr "" #: appGUI/MainGUI.py:963 msgid "Plugin Toolbar" msgstr "" #: appGUI/MainGUI.py:968 msgid "Excellon Editor Toolbar" msgstr "" #: appGUI/MainGUI.py:975 msgid "Geometry Editor Toolbar" msgstr "" #: appGUI/MainGUI.py:980 msgid "Gerber Editor Toolbar" msgstr "" #: appGUI/MainGUI.py:986 appGUI/MainGUI.py:2275 msgid "Delta Coordinates Toolbar" msgstr "" #: appGUI/MainGUI.py:990 appGUI/MainGUI.py:2283 msgid "Coordinates Toolbar" msgstr "" #: appGUI/MainGUI.py:994 appGUI/MainGUI.py:2291 msgid "Grid Toolbar" msgstr "" #: appGUI/MainGUI.py:1004 appGUI/MainGUI.py:2299 msgid "Status Toolbar" msgstr "" #: appGUI/MainGUI.py:1024 msgid "Save project" msgstr "" #: appGUI/MainGUI.py:1030 appGUI/MainGUI.py:2402 #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:21 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:19 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:20 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:21 appMain.py:2693 appMain.py:2956 msgid "Editor" msgstr "" #: appGUI/MainGUI.py:1053 appGUI/MainGUI.py:2425 appGUI/MainGUI.py:4896 #: appGUI/MainGUI.py:5161 msgid "Distance Tool" msgstr "" #: appGUI/MainGUI.py:1055 appGUI/MainGUI.py:2427 msgid "Distance Min Tool" msgstr "" #: appGUI/MainGUI.py:1072 appGUI/MainGUI.py:1696 appGUI/MainGUI.py:2444 msgid "Replot" msgstr "" #: appGUI/MainGUI.py:1074 appGUI/MainGUI.py:1694 appGUI/MainGUI.py:2446 msgid "Clear Plot" msgstr "" #: appGUI/MainGUI.py:1104 appGUI/MainGUI.py:2474 appGUI/ObjectUI.py:1517 #: appPlugins/ToolLevelling.py:187 appPlugins/ToolLevelling.py:1736 msgid "Levelling" msgstr "" #: appGUI/MainGUI.py:1113 appGUI/MainGUI.py:2483 appGUI/ObjectUI.py:237 #: appGUI/ObjectUI.py:444 appPlugins/ToolFollow.py:130 appPlugins/ToolFollow.py:666 msgid "Follow" msgstr "" #: appGUI/MainGUI.py:1124 appGUI/MainGUI.py:2494 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:117 appPlugins/ToolCutOut.py:2300 msgid "Panel" msgstr "" #: appGUI/MainGUI.py:1126 appGUI/MainGUI.py:2496 appGUI/ObjectUI.py:415 #: appPlugins/ToolFilm.py:158 appPlugins/ToolFilm.py:1230 msgid "Film" msgstr "" #: appGUI/MainGUI.py:1128 appGUI/MainGUI.py:2498 appPlugins/ToolDblSided.py:110 #: appPlugins/ToolDblSided.py:687 msgid "2-Sided" msgstr "" #: appGUI/MainGUI.py:1133 appGUI/MainGUI.py:2503 appGUI/MainGUI.py:4920 #: appPlugins/ToolAlignObjects.py:32 appPlugins/ToolAlignObjects.py:399 msgid "Align Objects" msgstr "" #: appGUI/MainGUI.py:1140 appGUI/MainGUI.py:2510 appGUI/MainGUI.py:4924 #: appPlugins/ToolExtract.py:131 appPlugins/ToolExtract.py:956 msgid "Extract" msgstr "" #: appGUI/MainGUI.py:1142 appGUI/MainGUI.py:2512 appGUI/MainGUI.py:4929 #: appPlugins/ToolCopperThieving.py:145 appPlugins/ToolCopperThieving.py:1268 msgid "Copper Thieving" msgstr "" #: appGUI/MainGUI.py:1144 appGUI/MainGUI.py:2514 appGUI/MainGUI.py:4921 #: appPlugins/ToolMarkers.py:154 appPlugins/ToolMarkers.py:1142 msgid "Markers" msgstr "" #: appGUI/MainGUI.py:1146 appGUI/MainGUI.py:2516 appGUI/MainGUI.py:4927 #: appPlugins/ToolPunchGerber.py:1971 appPlugins/ToolPunchGerber.py:2351 msgid "Punch Gerber" msgstr "" #: appGUI/MainGUI.py:1148 appGUI/MainGUI.py:2518 appGUI/MainGUI.py:4922 #: appPlugins/ToolCalculators.py:93 appPlugins/ToolCalculators.py:509 msgid "Calculators" msgstr "" #: appGUI/MainGUI.py:1180 appGUI/MainGUI.py:1206 appGUI/MainGUI.py:1266 #: appGUI/MainGUI.py:2550 appGUI/MainGUI.py:2576 appGUI/MainGUI.py:2630 msgid "Select" msgstr "" #: appGUI/MainGUI.py:1190 appGUI/MainGUI.py:1852 appGUI/MainGUI.py:2556 #: appGUI/MainGUI.py:5263 msgid "Resize Drill" msgstr "" #: appGUI/MainGUI.py:1194 appGUI/MainGUI.py:2564 appGUI/MainGUI.py:5258 msgid "Copy Drill" msgstr "" #: appGUI/MainGUI.py:1196 appGUI/MainGUI.py:2566 appGUI/MainGUI.py:5267 msgid "Delete Drill" msgstr "" #: appGUI/MainGUI.py:1223 appGUI/MainGUI.py:2593 msgid "Add Buffer" msgstr "" #: appGUI/MainGUI.py:1225 appGUI/MainGUI.py:2595 msgid "Paint Shape" msgstr "" #: appGUI/MainGUI.py:1233 appGUI/MainGUI.py:2603 msgid "Polygon Explode" msgstr "" #: appGUI/MainGUI.py:1239 msgid "" "Polygon Subtraction. First selected is the target.\n" "The rest of the selected is subtracted from the first.\n" "First selected is replaced by the result." msgstr "" #: appGUI/MainGUI.py:1244 msgid "" "Alt Subtraction. First selected is the target.\n" "The rest of the selected is subtracted from the first.\n" "First selected is kept besides the result." msgstr "" #: appGUI/MainGUI.py:1252 msgid "Copy Shape(s)" msgstr "" #: appGUI/MainGUI.py:1257 appGUI/MainGUI.py:1302 appGUI/MainGUI.py:1800 #: appGUI/MainGUI.py:1837 appGUI/MainGUI.py:2620 appGUI/MainGUI.py:2666 #: appGUI/MainGUI.py:4939 appGUI/ObjectUI.py:92 appGUI/ObjectUI.py:147 msgid "Transformations" msgstr "" #: appGUI/MainGUI.py:1260 appGUI/MainGUI.py:2624 msgid "Move Objects" msgstr "" #: appGUI/MainGUI.py:1279 appGUI/MainGUI.py:1821 appGUI/MainGUI.py:2643 msgid "SemiDisc" msgstr "" #: appGUI/MainGUI.py:1281 appGUI/MainGUI.py:1823 appGUI/MainGUI.py:2645 msgid "Disc" msgstr "" #: appGUI/MainGUI.py:1291 appGUI/MainGUI.py:2655 msgid "Import Shape" msgstr "" #: appGUI/MainGUI.py:1313 msgid "Snap to grid" msgstr "" #: appGUI/MainGUI.py:1316 msgid "Grid X snapping distance" msgstr "" #: appGUI/MainGUI.py:1321 msgid "" "When active, value on Grid_X\n" "is copied to the Grid_Y value." msgstr "" #: appGUI/MainGUI.py:1328 msgid "Grid Y snapping distance" msgstr "" #: appGUI/MainGUI.py:1339 msgid "Snap to corner" msgstr "" #: appGUI/MainGUI.py:1343 appGUI/preferences/general/GeneralAPPSetGroupUI.py:76 msgid "Max. magnet distance" msgstr "" #: appGUI/MainGUI.py:1353 msgid "Toggle the display of axis on canvas" msgstr "" #: appGUI/MainGUI.py:1365 msgid "HUD (Heads up display)" msgstr "" #: appGUI/MainGUI.py:1371 appGUI/preferences/general/GeneralAPPSetGroupUI.py:104 msgid "" "Draw a delimiting rectangle on canvas.\n" "The purpose is to illustrate the limits for our work." msgstr "" #: appGUI/MainGUI.py:1384 msgid "" "Relative measurement.\n" "Reference is last click position" msgstr "" #: appGUI/MainGUI.py:1392 msgid "" "Absolute measurement.\n" "Reference is (X=0, Y= 0) position" msgstr "" #: appGUI/MainGUI.py:1399 msgid "TCL Shell" msgstr "" #: appGUI/MainGUI.py:1472 appGUI/MainGUI.py:1480 appGUI/MainGUI.py:2808 #: appGUI/MainGUI.py:2814 appMain.py:2974 appMain.py:10333 msgid "Plot Area" msgstr "" #: appGUI/MainGUI.py:1557 msgid "CNC-JOB" msgstr "" #: appGUI/MainGUI.py:1567 msgid "Engraving" msgstr "" #: appGUI/MainGUI.py:1577 msgid "Processing" msgstr "" #: appGUI/MainGUI.py:1587 msgid "Extra Plugins" msgstr "" #: appGUI/MainGUI.py:1598 msgid "UTILITIES" msgstr "" #: appGUI/MainGUI.py:1616 appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:216 msgid "Restore Defaults" msgstr "" #: appGUI/MainGUI.py:1620 msgid "" "Restore the entire set of default values\n" "to the initial values loaded after first launch." msgstr "" #: appGUI/MainGUI.py:1625 msgid "Open Pref Folder" msgstr "" #: appGUI/MainGUI.py:1629 msgid "Open the folder where FlatCAM save the preferences files." msgstr "" #: appGUI/MainGUI.py:1633 appGUI/MainGUI.py:2355 msgid "Clear GUI Settings" msgstr "" #: appGUI/MainGUI.py:1638 msgid "" "Clear the GUI settings for FlatCAM,\n" "such as: layout, gui state, style etc." msgstr "" #: appGUI/MainGUI.py:1654 msgid "Apply the current preferences without saving to a file." msgstr "" #: appGUI/MainGUI.py:1662 msgid "" "Save the current settings in the 'current_defaults' file\n" "which is the file storing the working default preferences." msgstr "" #: appGUI/MainGUI.py:1670 msgid "Will not save the changes and will close the preferences window." msgstr "" #: appGUI/MainGUI.py:1687 msgid "Toggle Visibility" msgstr "" #: appGUI/MainGUI.py:1714 msgid "Grids" msgstr "" #: appGUI/MainGUI.py:1769 msgid "Rectangle" msgstr "" #: appGUI/MainGUI.py:1772 msgid "Circle" msgstr "" #: appGUI/MainGUI.py:1776 msgid "Arc" msgstr "" #: appGUI/MainGUI.py:1790 msgid "Union" msgstr "" #: appGUI/MainGUI.py:1792 msgid "Intersection" msgstr "" #: appGUI/MainGUI.py:1794 msgid "Subtraction" msgstr "" #: appGUI/MainGUI.py:1809 msgid "Pad" msgstr "" #: appGUI/MainGUI.py:1811 msgid "Pad Array" msgstr "" #: appGUI/MainGUI.py:1815 msgid "Track" msgstr "" #: appGUI/MainGUI.py:1817 msgid "Region" msgstr "" #: appGUI/MainGUI.py:1840 msgid "Exc Editor" msgstr "" #: appGUI/MainGUI.py:1868 msgid "Move2Origin" msgstr "" #: appGUI/MainGUI.py:1896 msgid "Application units" msgstr "" #: appGUI/MainGUI.py:1996 msgid "Lock Toolbars" msgstr "" #: appGUI/MainGUI.py:2252 msgid "Detachable Tabs" msgstr "" #: appGUI/MainGUI.py:2336 msgid "FlatCAM Preferences Folder opened." msgstr "" #: appGUI/MainGUI.py:2356 msgid "Are you sure you want to delete the GUI Settings? \n" msgstr "" #: appGUI/MainGUI.py:2363 appGUI/preferences/PreferencesUIManager.py:1077 #: appGUI/preferences/PreferencesUIManager.py:1310 appTranslation.py:120 #: appTranslation.py:226 appMain.py:2752 appMain.py:4020 appMain.py:6824 #: appMain.py:10216 appMain.py:10346 msgid "Yes" msgstr "" #: appGUI/MainGUI.py:2364 appGUI/preferences/PreferencesUIManager.py:1311 #: appTranslation.py:121 appTranslation.py:227 appMain.py:2753 appMain.py:4021 #: appMain.py:6825 appMain.py:10217 appMain.py:10347 msgid "No" msgstr "" #: appGUI/MainGUI.py:2616 msgid "Copy Objects" msgstr "" #: appGUI/MainGUI.py:2690 msgid "Key Shortcut List" msgstr "" #: appGUI/MainGUI.py:3409 msgid "" "Please first select a geometry item to be cutted\n" "then select the geometry item that will be cutted\n" "out of the first item. In the end press ~X~ key or\n" "the toolbar button." msgstr "" #: appGUI/MainGUI.py:3415 appGUI/MainGUI.py:3577 appGUI/MainGUI.py:3626 #: appGUI/MainGUI.py:3650 msgid "Warning" msgstr "" #: appGUI/MainGUI.py:3573 msgid "" "Please select geometry items \n" "on which to perform Intersection Tool." msgstr "" #: appGUI/MainGUI.py:3622 msgid "" "Please select geometry items \n" "on which to perform Substraction Tool." msgstr "" #: appGUI/MainGUI.py:3646 msgid "" "Please select geometry items \n" "on which to perform union." msgstr "" #: appGUI/MainGUI.py:4136 appPlugins/ToolIsolation.py:1008 appPlugins/ToolNCC.py:1382 #: appPlugins/ToolPaint.py:672 appPlugins/ToolSolderPaste.py:344 #: appPlugins/ToolSolderPaste.py:1284 appMain.py:5125 msgid "New Tool" msgstr "" #: appGUI/MainGUI.py:4137 appPlugins/ToolIsolation.py:1009 appPlugins/ToolNCC.py:1383 #: appPlugins/ToolPaint.py:673 appPlugins/ToolSolderPaste.py:345 appMain.py:5126 msgid "Enter a Tool Diameter" msgstr "" #: appGUI/MainGUI.py:4149 appPlugins/ToolIsolation.py:1030 appPlugins/ToolNCC.py:1404 #: appPlugins/ToolPaint.py:686 appPlugins/ToolSolderPaste.py:357 appMain.py:5142 msgid "Adding Tool cancelled" msgstr "" #: appGUI/MainGUI.py:4427 appMain.py:4005 msgid "Application is saving the project. Please wait ..." msgstr "" #: appGUI/MainGUI.py:4463 msgid "Shortcut Key List" msgstr "" #: appGUI/MainGUI.py:4866 msgid "General Shortcut list" msgstr "" #: appGUI/MainGUI.py:4867 msgid "SHOW SHORTCUT LIST" msgstr "" #: appGUI/MainGUI.py:4868 msgid "1" msgstr "" #: appGUI/MainGUI.py:4868 msgid "Switch to Project Tab" msgstr "" #: appGUI/MainGUI.py:4869 msgid "2" msgstr "" #: appGUI/MainGUI.py:4869 msgid "Switch to Selected Tab" msgstr "" #: appGUI/MainGUI.py:4870 msgid "3" msgstr "" #: appGUI/MainGUI.py:4870 msgid "Switch to Tool Tab" msgstr "" #: appGUI/MainGUI.py:4871 msgid "New Gerber" msgstr "" #: appGUI/MainGUI.py:4872 msgid "Edit Object (if selected)" msgstr "" #: appGUI/MainGUI.py:4873 appMain.py:7218 msgid "Grid On/Off" msgstr "" #: appGUI/MainGUI.py:4874 msgid "Jump to Coordinates" msgstr "" #: appGUI/MainGUI.py:4875 msgid "New Excellon" msgstr "" #: appGUI/MainGUI.py:4876 msgid "Move Obj" msgstr "" #: appGUI/MainGUI.py:4877 msgid "New Geometry" msgstr "" #: appGUI/MainGUI.py:4879 msgid "Change Units" msgstr "" #: appGUI/MainGUI.py:4880 msgid "Open Properties Plugin" msgstr "" #: appGUI/MainGUI.py:4881 msgid "Rotate by 90 degree CW" msgstr "" #: appGUI/MainGUI.py:4882 msgid "Shell Toggle" msgstr "" #: appGUI/MainGUI.py:4883 msgid "Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)" msgstr "" #: appGUI/MainGUI.py:4885 msgid "Flip on X_axis" msgstr "" #: appGUI/MainGUI.py:4886 msgid "Flip on Y_axis" msgstr "" #: appGUI/MainGUI.py:4892 msgid "Copy Obj" msgstr "" #: appGUI/MainGUI.py:4893 msgid "Open Tools Database" msgstr "" #: appGUI/MainGUI.py:4894 msgid "Open Excellon File" msgstr "" #: appGUI/MainGUI.py:4895 msgid "Open Gerber File" msgstr "" #: appGUI/MainGUI.py:4896 appGUI/MainGUI.py:5161 msgid "Ctrl+M" msgstr "" #: appGUI/MainGUI.py:4900 msgid "Ctrl+Q" msgstr "" #: appGUI/MainGUI.py:4900 appPlugins/ToolPDF.py:44 msgid "PDF Import Tool" msgstr "" #: appGUI/MainGUI.py:4905 msgid "Toggle the axis" msgstr "" #: appGUI/MainGUI.py:4906 msgid "Shift+C" msgstr "" #: appGUI/MainGUI.py:4906 msgid "Copy Obj_Name" msgstr "" #: appGUI/MainGUI.py:4911 appGUI/MainGUI.py:5155 appGUI/MainGUI.py:5266 #: appGUI/MainGUI.py:5412 msgid "Shift+M" msgstr "" #: appGUI/MainGUI.py:4911 appGUI/MainGUI.py:5155 appGUI/MainGUI.py:5266 #: appGUI/MainGUI.py:5412 msgid "Distance Minimum Tool" msgstr "" #: appGUI/MainGUI.py:4912 msgid "Open Preferences Window" msgstr "" #: appGUI/MainGUI.py:4913 msgid "Shift+R" msgstr "" #: appGUI/MainGUI.py:4913 msgid "Rotate by 90 degree CCW" msgstr "" #: appGUI/MainGUI.py:4914 msgid "Run a Script" msgstr "" #: appGUI/MainGUI.py:4915 msgid "Toggle the workspace" msgstr "" #: appGUI/MainGUI.py:4921 msgid "Alt+B" msgstr "" #: appGUI/MainGUI.py:4922 msgid "Alt+C" msgstr "" #: appGUI/MainGUI.py:4923 msgid "Alt+D" msgstr "" #: appGUI/MainGUI.py:4923 msgid "2-Sided PCB" msgstr "" #: appGUI/MainGUI.py:4924 msgid "Alt+E" msgstr "" #: appGUI/MainGUI.py:4925 msgid "Alt+F" msgstr "" #: appGUI/MainGUI.py:4925 appPlugins/ToolFiducials.py:139 appPlugins/ToolFiducials.py:807 msgid "Fiducials" msgstr "" #: appGUI/MainGUI.py:4926 msgid "Alt+G" msgstr "" #: appGUI/MainGUI.py:4926 appPlugins/ToolInvertGerber.py:104 #: appPlugins/ToolInvertGerber.py:207 appPlugins/ToolInvertGerber.py:302 msgid "Invert Gerber" msgstr "" #: appGUI/MainGUI.py:4927 msgid "Alt+H" msgstr "" #: appGUI/MainGUI.py:4928 msgid "Alt+I" msgstr "" #: appGUI/MainGUI.py:4929 msgid "Alt+J" msgstr "" #: appGUI/MainGUI.py:4930 msgid "Alt+K" msgstr "" #: appGUI/MainGUI.py:4930 msgid "Solder Paste Dispensing" msgstr "" #: appGUI/MainGUI.py:4931 msgid "Alt+L" msgstr "" #: appGUI/MainGUI.py:4931 msgid "Film PCB" msgstr "" #: appGUI/MainGUI.py:4932 msgid "Alt+M" msgstr "" #: appGUI/MainGUI.py:4933 appPlugins/ToolNCC.py:2290 appPlugins/ToolNCC.py:2292 #: appPlugins/ToolNCC.py:2882 appPlugins/ToolNCC.py:2884 msgid "Non-Copper Clearing" msgstr "" #: appGUI/MainGUI.py:4934 msgid "Alt+O" msgstr "" #: appGUI/MainGUI.py:4934 appPlugins/ToolIsolation.py:3457 appPlugins/ToolNCC.py:4246 msgid "Optimal" msgstr "" #: appGUI/MainGUI.py:4935 msgid "Alt+P" msgstr "" #: appGUI/MainGUI.py:4935 msgid "Paint Area" msgstr "" #: appGUI/MainGUI.py:4936 msgid "Alt+Q" msgstr "" #: appGUI/MainGUI.py:4936 appPlugins/ToolQRCode.py:130 appPlugins/ToolQRCode.py:720 msgid "QRCode" msgstr "" #: appGUI/MainGUI.py:4937 msgid "Rules Check" msgstr "" #: appGUI/MainGUI.py:4938 msgid "View File Source" msgstr "" #: appGUI/MainGUI.py:4939 msgid "Alt+T" msgstr "" #: appGUI/MainGUI.py:4940 msgid "Alt+W" msgstr "" #: appGUI/MainGUI.py:4940 appPlugins/ToolSub.py:165 appPlugins/ToolSub.py:775 msgid "Subtract" msgstr "" #: appGUI/MainGUI.py:4941 appGUI/MainGUI.py:5159 msgid "Alt+X" msgstr "" #: appGUI/MainGUI.py:4941 msgid "Cutout PCB" msgstr "" #: appGUI/MainGUI.py:4942 msgid "Alt+Z" msgstr "" #: appGUI/MainGUI.py:4942 appPlugins/ToolPanelize.py:36 msgid "Panelize PCB" msgstr "" #: appGUI/MainGUI.py:4945 msgid "Enable Non-selected Objects" msgstr "" #: appGUI/MainGUI.py:4946 msgid "Disable Non-selected Objects" msgstr "" #: appGUI/MainGUI.py:4947 msgid "Toggle Full Screen" msgstr "" #: appGUI/MainGUI.py:4950 msgid "Ctrl+Alt+X" msgstr "" #: appGUI/MainGUI.py:4950 msgid "Abort current task (gracefully)" msgstr "" #: appGUI/MainGUI.py:4954 msgid "Ctrl+Shift+V" msgstr "" #: appGUI/MainGUI.py:4954 msgid "Paste Special. Will convert a Windows path style to the one required in Tcl Shell" msgstr "" #: appGUI/MainGUI.py:4958 msgid "Open Online Manual" msgstr "" #: appGUI/MainGUI.py:4959 msgid "F2" msgstr "" #: appGUI/MainGUI.py:4959 msgid "Rename Objects" msgstr "" #: appGUI/MainGUI.py:4960 msgid "Open Online Tutorials" msgstr "" #: appGUI/MainGUI.py:4961 msgid "Refresh Plots" msgstr "" #: appGUI/MainGUI.py:4962 appPlugins/ToolSolderPaste.py:1707 msgid "Delete Object" msgstr "" #: appGUI/MainGUI.py:4963 appGUI/MainGUI.py:5268 msgid "Alternate: Delete Tool" msgstr "" #: appGUI/MainGUI.py:4964 msgid "(left to Key_1)Toggle Notebook Area (Left Side)" msgstr "" #: appGUI/MainGUI.py:4965 appGUI/MainGUI.py:5164 appGUI/MainGUI.py:5270 #: appGUI/MainGUI.py:5411 msgid "Space" msgstr "" #: appGUI/MainGUI.py:4965 msgid "En(Dis)able Obj Plot" msgstr "" #: appGUI/MainGUI.py:4966 appGUI/MainGUI.py:5166 appGUI/MainGUI.py:5269 #: appGUI/MainGUI.py:5410 msgid "Esc" msgstr "" #: appGUI/MainGUI.py:4966 msgid "Deselects all objects" msgstr "" #: appGUI/MainGUI.py:4980 msgid "Editor Shortcut list" msgstr "" #: appGUI/MainGUI.py:5135 msgid "GEOMETRY EDITOR" msgstr "" #: appGUI/MainGUI.py:5136 msgid "Draw an Arc" msgstr "" #: appGUI/MainGUI.py:5138 msgid "Copy Geo Item" msgstr "" #: appGUI/MainGUI.py:5139 msgid "Within Add Arc will toogle the ARC direction: CW or CCW" msgstr "" #: appGUI/MainGUI.py:5140 msgid "Polygon Intersection Tool" msgstr "" #: appGUI/MainGUI.py:5141 msgid "Geo Paint Tool" msgstr "" #: appGUI/MainGUI.py:5142 appGUI/MainGUI.py:5260 appGUI/MainGUI.py:5400 msgid "Jump to Location (x, y)" msgstr "" #: appGUI/MainGUI.py:5144 msgid "Move Geo Item" msgstr "" #: appGUI/MainGUI.py:5145 msgid "Within Add Arc will cycle through the ARC modes" msgstr "" #: appGUI/MainGUI.py:5146 msgid "Draw a Polygon" msgstr "" #: appGUI/MainGUI.py:5147 msgid "Draw a Circle" msgstr "" #: appGUI/MainGUI.py:5148 msgid "Draw a Path" msgstr "" #: appGUI/MainGUI.py:5149 msgid "Draw Rectangle" msgstr "" #: appGUI/MainGUI.py:5150 msgid "Polygon Subtraction Tool" msgstr "" #: appGUI/MainGUI.py:5151 msgid "Add Text Tool" msgstr "" #: appGUI/MainGUI.py:5152 msgid "Polygon Union Tool" msgstr "" #: appGUI/MainGUI.py:5153 msgid "Flip shape on X axis" msgstr "" #: appGUI/MainGUI.py:5154 msgid "Flip shape on Y axis" msgstr "" #: appGUI/MainGUI.py:5156 msgid "Skew shape on X axis" msgstr "" #: appGUI/MainGUI.py:5157 msgid "Skew shape on Y axis" msgstr "" #: appGUI/MainGUI.py:5158 msgid "Editor Transformation Tool" msgstr "" #: appGUI/MainGUI.py:5159 msgid "Offset shape on X axis" msgstr "" #: appGUI/MainGUI.py:5160 msgid "Alt+Y" msgstr "" #: appGUI/MainGUI.py:5160 msgid "Offset shape on Y axis" msgstr "" #: appGUI/MainGUI.py:5162 appGUI/MainGUI.py:5271 appGUI/MainGUI.py:5414 msgid "Save Object and Exit Editor" msgstr "" #: appGUI/MainGUI.py:5163 msgid "Polygon Cut Tool" msgstr "" #: appGUI/MainGUI.py:5164 msgid "Rotate Geometry" msgstr "" #: appGUI/MainGUI.py:5165 msgid "ENTER" msgstr "" #: appGUI/MainGUI.py:5165 msgid "Finish drawing for certain tools" msgstr "" #: appGUI/MainGUI.py:5166 appGUI/MainGUI.py:5269 appGUI/MainGUI.py:5410 msgid "Abort and return to Select" msgstr "" #: appGUI/MainGUI.py:5256 msgid "EXCELLON EDITOR" msgstr "" #: appGUI/MainGUI.py:5264 msgid "Add a new Tool" msgstr "" #: appGUI/MainGUI.py:5270 msgid "Toggle Slot direction" msgstr "" #: appGUI/MainGUI.py:5272 msgid "Ctrl+Space" msgstr "" #: appGUI/MainGUI.py:5272 appGUI/MainGUI.py:5411 msgid "Toggle array direction" msgstr "" #: appGUI/MainGUI.py:5394 msgid "GERBER EDITOR" msgstr "" #: appGUI/MainGUI.py:5404 msgid "Within Track & Region Tools will cycle in REVERSE the bend modes" msgstr "" #: appGUI/MainGUI.py:5407 msgid "Within Track & Region Tools will cycle FORWARD the bend modes" msgstr "" #: appGUI/MainGUI.py:5409 msgid "Alternate: Delete Apertures" msgstr "" #: appGUI/MainGUI.py:5413 msgid "Eraser Tool" msgstr "" #: appGUI/MainGUI.py:5415 appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:265 msgid "Mark Area Tool" msgstr "" #: appGUI/MainGUI.py:5416 msgid "Poligonize Tool" msgstr "" #: appGUI/MainGUI.py:5417 msgid "Transformation Tool" msgstr "" #: appGUI/ObjectUI.py:32 msgid "App Object" msgstr "" #: appGUI/ObjectUI.py:94 appGUI/ObjectUI.py:150 msgid "Geometrical transformations of the current object." msgstr "" #: appGUI/ObjectUI.py:116 msgid "" "Factor by which to multiply\n" "geometric features of this object.\n" "Expressions are allowed. E.g: 1/25.4" msgstr "" #: appGUI/ObjectUI.py:123 msgid "Perform scaling operation." msgstr "" #: appGUI/ObjectUI.py:133 msgid "" "Amount by which to move the object\n" "in the x and y axes in (x, y) format.\n" "Expressions are allowed. E.g: (1/3.2, 0.5*3)" msgstr "" #: appGUI/ObjectUI.py:140 msgid "Perform the offset operation." msgstr "" #: appGUI/ObjectUI.py:183 msgid "Gerber Object" msgstr "" #: appGUI/ObjectUI.py:185 appGUI/ObjectUI.py:604 appGUI/ObjectUI.py:941 #: appGUI/ObjectUI.py:1283 msgid "General Information" msgstr "" #: appGUI/ObjectUI.py:186 appGUI/ObjectUI.py:605 appGUI/ObjectUI.py:942 #: appGUI/ObjectUI.py:1284 msgid "General data about the object." msgstr "" #: appGUI/ObjectUI.py:200 appGUI/ObjectUI.py:620 appGUI/ObjectUI.py:956 #: appGUI/ObjectUI.py:1299 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:27 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:30 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:29 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:28 msgid "Plot Options" msgstr "" #: appGUI/ObjectUI.py:205 appGUI/ObjectUI.py:623 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:47 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:50 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137 #: appPlugins/ToolCopperThieving.py:1449 msgid "Solid" msgstr "" #: appGUI/ObjectUI.py:207 appGUI/preferences/gerber/GerberGenPrefGroupUI.py:52 msgid "Solid color polygons." msgstr "" #: appGUI/ObjectUI.py:212 appGUI/ObjectUI.py:629 appGUI/ObjectUI.py:962 msgid "Multi-Color" msgstr "" #: appGUI/ObjectUI.py:214 appGUI/ObjectUI.py:631 appGUI/ObjectUI.py:964 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:56 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:48 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:59 msgid "Draw polygons in different colors." msgstr "" #: appGUI/ObjectUI.py:229 appGUI/ObjectUI.py:710 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:40 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:39 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:43 msgid "Plot" msgstr "" #: appGUI/ObjectUI.py:230 appGUI/ObjectUI.py:712 appGUI/ObjectUI.py:1057 #: appGUI/ObjectUI.py:1472 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:38 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:41 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:45 appPlugins/ToolMilling.py:4043 msgid "Plot (show) this object." msgstr "" #: appGUI/ObjectUI.py:238 appGUI/ObjectUI.py:447 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:37 appPlugins/ToolFollow.py:779 msgid "" "Generate a 'Follow' geometry.\n" "This means that it will cut through\n" "the middle of the trace." msgstr "" #: appGUI/ObjectUI.py:247 appGUI/ObjectUI.py:654 appGUI/ObjectUI.py:984 #: appGUI/ObjectUI.py:1333 msgid "Start the Object Editor" msgstr "" #: appGUI/ObjectUI.py:258 appGUI/ObjectUI.py:665 appGUI/ObjectUI.py:995 #: appGUI/ObjectUI.py:1343 msgid "INFO" msgstr "" #: appGUI/ObjectUI.py:260 appGUI/ObjectUI.py:667 appGUI/ObjectUI.py:997 #: appGUI/ObjectUI.py:1345 msgid "Show the Object Attributes." msgstr "" #: appGUI/ObjectUI.py:288 appGUI/ObjectUI.py:695 appGUI/ObjectUI.py:1025 #: appGUI/ObjectUI.py:1438 msgid "Tools/apertures in the loaded object." msgstr "" #: appGUI/ObjectUI.py:309 appGUI/ObjectUI.py:705 #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:44 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:46 msgid "Toggle the display of the Tools Table." msgstr "" #: appGUI/ObjectUI.py:318 msgid "Mark All" msgstr "" #: appGUI/ObjectUI.py:320 msgid "" "When checked it will display all the apertures.\n" "When unchecked, it will delete all mark shapes\n" "that are drawn on canvas." msgstr "" #: appGUI/ObjectUI.py:350 appPlugins/ToolExtract.py:1090 appPlugins/ToolPunchGerber.py:2120 msgid "Mark the aperture instances on canvas." msgstr "" #: appGUI/ObjectUI.py:357 appPlugins/ToolIsolation.py:3933 msgid "Buffer Solid Geometry" msgstr "" #: appGUI/ObjectUI.py:359 appPlugins/ToolIsolation.py:3935 msgid "" "This button is shown only when the Gerber file\n" "is loaded without buffering.\n" "Clicking this will create the buffered geometry\n" "required for isolation." msgstr "" #: appGUI/ObjectUI.py:385 msgid "Isolation Routing" msgstr "" #: appGUI/ObjectUI.py:388 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:27 #: appPlugins/ToolIsolation.py:3327 msgid "" "Create a Geometry object with\n" "toolpaths to cut around polygons." msgstr "" #: appGUI/ObjectUI.py:403 msgid "" "Generate the geometry for\n" "the board cutout." msgstr "" #: appGUI/ObjectUI.py:418 appPlugins/ToolFilm.py:1257 msgid "Create a positive/negative film for UV exposure." msgstr "" #: appGUI/ObjectUI.py:432 appGUI/ObjectUI.py:1143 appPlugins/ToolNCC.py:4629 msgid "" "Create the Geometry Object\n" "for non-copper routing." msgstr "" #: appGUI/ObjectUI.py:460 appGUI/ObjectUI.py:823 appGUI/ObjectUI.py:1160 #: appPlugins/ToolEtchCompensation.py:348 msgid "Utilities" msgstr "" #: appGUI/ObjectUI.py:462 appGUI/ObjectUI.py:825 appGUI/ObjectUI.py:1162 msgid "Show the Utilities." msgstr "" #: appGUI/ObjectUI.py:485 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:28 msgid "Non-copper regions" msgstr "" #: appGUI/ObjectUI.py:487 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:30 msgid "" "Create polygons covering the\n" "areas without copper on the PCB.\n" "Equivalent to the inverse of this\n" "object. Can be used to remove all\n" "copper from a specified region." msgstr "" #: appGUI/ObjectUI.py:502 appGUI/ObjectUI.py:548 #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:46 #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:80 msgid "Boundary Margin" msgstr "" #: appGUI/ObjectUI.py:504 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:48 msgid "" "Specify the edge of the PCB\n" "by drawing a box around all\n" "objects with this minimum\n" "distance." msgstr "" #: appGUI/ObjectUI.py:521 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:226 appPlugins/ToolFilm.py:1564 msgid "Resulting geometry will have rounded corners." msgstr "" #: appGUI/ObjectUI.py:524 appGUI/ObjectUI.py:569 appPlugins/ToolCutOut.py:2694 #: appPlugins/ToolFollow.py:771 appPlugins/ToolIsolation.py:3912 appPlugins/ToolNCC.py:4626 #: appPlugins/ToolPaint.py:3367 appPlugins/ToolSolderPaste.py:1592 msgid "Generate Geometry" msgstr "" #: appGUI/ObjectUI.py:533 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:71 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:134 appPlugins/ToolPanelize.py:1245 #: appPlugins/ToolQRCode.py:907 msgid "Bounding Box" msgstr "" #: appGUI/ObjectUI.py:535 msgid "" "Create a geometry surrounding the Gerber object.\n" "Square shape." msgstr "" #: appGUI/ObjectUI.py:550 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:82 msgid "" "Distance of the edges of the box\n" "to the nearest polygon." msgstr "" #: appGUI/ObjectUI.py:563 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:95 msgid "" "If the bounding box is \n" "to have rounded corners\n" "their radius is equal to\n" "the margin." msgstr "" #: appGUI/ObjectUI.py:572 msgid "Generate the Geometry object." msgstr "" #: appGUI/ObjectUI.py:599 msgid "Excellon Object" msgstr "" #: appGUI/ObjectUI.py:625 msgid "Solid circles." msgstr "" #: appGUI/ObjectUI.py:745 appPlugins/ToolDrilling.py:2472 appPlugins/ToolMilling.py:4067 msgid "" "This is the Tool Number.\n" "When ToolChange is checked, on toolchange event this value\n" "will be showed as a T1, T2 ... Tn in the Machine Code.\n" "\n" "Here the tools are selected for G-code generation." msgstr "" #: appGUI/ObjectUI.py:750 appGUI/ObjectUI.py:1080 appPlugins/ToolDrilling.py:2477 #: appPlugins/ToolIsolation.py:3405 appPlugins/ToolMilling.py:4072 #: appPlugins/ToolMilling.py:4190 appPlugins/ToolNCC.py:4175 appPlugins/ToolPaint.py:3051 msgid "" "Tool Diameter. Its value\n" "is the cut width into the material." msgstr "" #: appGUI/ObjectUI.py:753 appPlugins/ToolDrilling.py:2480 appPlugins/ToolMilling.py:4075 msgid "" "The number of Drill holes. Holes that are drilled with\n" "a drill bit." msgstr "" #: appGUI/ObjectUI.py:756 appPlugins/ToolDrilling.py:2483 appPlugins/ToolMilling.py:4078 msgid "" "The number of Slot holes. Holes that are created by\n" "milling them with an endmill bit." msgstr "" #: appGUI/ObjectUI.py:759 msgid "Show the color of the drill holes when using multi-color." msgstr "" #: appGUI/ObjectUI.py:761 msgid "" "Toggle display of the drills for the current tool.\n" "This does not select the tools for G-code generation." msgstr "" #: appGUI/ObjectUI.py:770 appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:49 msgid "Auto load from DB" msgstr "" #: appGUI/ObjectUI.py:772 appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:51 msgid "" "Automatic replacement of the tools from related application tools\n" "with tools from DB that have a close diameter value." msgstr "" #: appGUI/ObjectUI.py:793 msgid "Generate GCode from the drill holes in an Excellon object." msgstr "" #: appGUI/ObjectUI.py:807 msgid "Generate a Geometry for milling drills or slots in an Excellon object." msgstr "" #: appGUI/ObjectUI.py:847 msgid "Milling Geometry" msgstr "" #: appGUI/ObjectUI.py:849 msgid "" "Create Geometry for milling holes.\n" "Select from the Tools Table above the hole dias to be\n" "milled. Use the # column to make the selection." msgstr "" #: appGUI/ObjectUI.py:861 appGUI/preferences/tools/ToolsMillPrefGroupUI.py:598 #: appPlugins/ToolMilling.py:4336 msgid "Milling Diameter" msgstr "" #: appGUI/ObjectUI.py:863 msgid "Diameter of the cutting tool." msgstr "" #: appGUI/ObjectUI.py:873 msgid "Mill Drills" msgstr "" #: appGUI/ObjectUI.py:875 msgid "" "Create the Geometry Object\n" "for milling drills." msgstr "" #: appGUI/ObjectUI.py:893 msgid "Mill Slots" msgstr "" #: appGUI/ObjectUI.py:895 msgid "" "Create the Geometry Object\n" "for milling slots." msgstr "" #: appGUI/ObjectUI.py:937 msgid "Geometry Object" msgstr "" #: appGUI/ObjectUI.py:1038 msgid "" "Tools in this Geometry object used for cutting.\n" "The 'Offset' entry will set an offset for the cut.\n" "'Offset' can be inside, outside, on path (none) and custom.\n" "'Type' entry is only informative and it allow to know the \n" "intent of using the current tool. \n" "It can be Rough(ing), Finish(ing) or Iso(lation).\n" "The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n" "ball(B), or V-Shaped(V). \n" "When V-shaped is selected the 'Type' entry is automatically \n" "set to Isolation, the CutZ parameter in the UI form is\n" "grayed out and Cut Z is automatically calculated from the newly \n" "showed UI form entries named V-Tip Dia and V-Tip Angle." msgstr "" #: appGUI/ObjectUI.py:1055 appGUI/ObjectUI.py:1470 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:37 appPlugins/ToolMilling.py:4042 msgid "Plot Object" msgstr "" #: appGUI/ObjectUI.py:1068 appGUI/ObjectUI.py:1483 appGUI/ObjectUI.py:1493 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:156 #: appPlugins/ToolCopperThieving.py:1474 appPlugins/ToolMilling.py:4179 msgid "Dia" msgstr "" #: appGUI/ObjectUI.py:1075 msgid "" "Tool Number.\n" "When ToolChange is checked, on toolchange event this value\n" "will be showed as a T1, T2 ... Tn" msgstr "" #: appGUI/ObjectUI.py:1084 msgid "Offset Type. The kind of cut offset to be used." msgstr "" #: appGUI/ObjectUI.py:1088 msgid "" "Job Type. Usually the UI form values \n" "are choose based on the operation type and this will serve as a reminder." msgstr "" #: appGUI/ObjectUI.py:1100 msgid "" "Plot column. It is visible only for MultiGeo Geometry objects.\n" "Enable plot for the selected tool geometry." msgstr "" #: appGUI/ObjectUI.py:1119 msgid "Generate a CNCJob by milling a Geometry." msgstr "" #: appGUI/ObjectUI.py:1133 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:30 msgid "" "Creates tool paths to cover the\n" "whole area of a polygon." msgstr "" #: appGUI/ObjectUI.py:1198 appObjects/FlatCAMObj.py:745 msgid "Points" msgstr "" #: appGUI/ObjectUI.py:1200 msgid "Total of vertex points in the geometry." msgstr "" #: appGUI/ObjectUI.py:1208 appPlugins/ToolCalculators.py:660 #: appPlugins/ToolCalculators.py:848 appPlugins/ToolCalculators.py:1041 msgid "Calculate" msgstr "" #: appGUI/ObjectUI.py:1211 msgid "Calculate the number of vertex points in the geometry." msgstr "" #: appGUI/ObjectUI.py:1277 msgid "CNC Job Object" msgstr "" #: appGUI/ObjectUI.py:1302 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:52 msgid "" "This selects the kind of geometries on the canvas to plot.\n" "Those can be either of type 'Travel' which means the moves\n" "above the work piece or it can be of type 'Cut',\n" "which means the moves that cut into the material." msgstr "" #: appGUI/ObjectUI.py:1311 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:60 msgid "Travel" msgstr "" #: appGUI/ObjectUI.py:1382 appObjects/FlatCAMObj.py:929 appPlugins/ToolReport.py:594 msgid "Travelled distance" msgstr "" #: appGUI/ObjectUI.py:1384 msgid "" "This is the total travelled distance on X-Y plane.\n" "In current units." msgstr "" #: appGUI/ObjectUI.py:1395 msgid "Estimated time" msgstr "" #: appGUI/ObjectUI.py:1397 msgid "" "This is the estimated time to do the routing/drilling,\n" "without the time spent in ToolChange events." msgstr "" #: appGUI/ObjectUI.py:1418 msgid "Use CNC Code Snippets" msgstr "" #: appGUI/ObjectUI.py:1420 msgid "" "When selected, it will include CNC Code snippets (append and prepend)\n" "defined in the Preferences." msgstr "" #: appGUI/ObjectUI.py:1426 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:68 msgid "Display Annotation" msgstr "" #: appGUI/ObjectUI.py:1428 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:70 msgid "" "This selects if to display text annotation on the plot.\n" "When checked it will display numbers in order for each end\n" "of a travel line." msgstr "" #: appGUI/ObjectUI.py:1452 msgid "CNC Tools Table" msgstr "" #: appGUI/ObjectUI.py:1455 msgid "" "Tools in this CNCJob object used for cutting.\n" "The tool diameter is used for plotting on canvas.\n" "The 'Offset' entry will set an offset for the cut.\n" "'Offset' can be inside, outside, on path (none) and custom.\n" "'Type' entry is only informative and it allow to know the \n" "intent of using the current tool. \n" "It can be Rough(ing), Finish(ing) or Iso(lation).\n" "The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n" "ball(B), or V-Shaped(V)." msgstr "" #: appGUI/ObjectUI.py:1504 msgid "Update Plot" msgstr "" #: appGUI/ObjectUI.py:1506 msgid "Update the plot." msgstr "" #: appGUI/ObjectUI.py:1520 appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:27 #: appPlugins/ToolLevelling.py:1763 msgid "Generate CNC Code with auto-levelled paths." msgstr "" #: appGUI/ObjectUI.py:1547 msgid "Opens dialog to save CNC Code file." msgstr "" #: appGUI/ObjectUI.py:1553 appPlugins/ToolSolderPaste.py:1678 msgid "Review CNC Code." msgstr "" #: appGUI/ObjectUI.py:1587 msgid "Script Object" msgstr "" #: appGUI/ObjectUI.py:1607 appGUI/ObjectUI.py:1681 msgid "Auto Completer" msgstr "" #: appGUI/ObjectUI.py:1609 msgid "This selects if the auto completer is enabled in the Script Editor." msgstr "" #: appGUI/ObjectUI.py:1654 msgid "Document Object" msgstr "" #: appGUI/ObjectUI.py:1683 msgid "This selects if the auto completer is enabled in the Document Editor." msgstr "" #: appGUI/ObjectUI.py:1701 msgid "Font Type" msgstr "" #: appGUI/ObjectUI.py:1719 appGUI/preferences/general/GeneralAPPSetGroupUI.py:194 msgid "Font Size" msgstr "" #: appGUI/ObjectUI.py:1755 msgid "Alignment" msgstr "" #: appGUI/ObjectUI.py:1760 msgid "Align Left" msgstr "" #: appGUI/ObjectUI.py:1765 appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:101 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:164 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:101 appPlugins/ToolFilm.py:1409 #: appPlugins/ToolFilm.py:1485 appPlugins/ToolMarkers.py:1283 appMain.py:5545 #: appMain.py:5779 msgid "Center" msgstr "" #: appGUI/ObjectUI.py:1770 msgid "Align Right" msgstr "" #: appGUI/ObjectUI.py:1775 msgid "Justify" msgstr "" #: appGUI/ObjectUI.py:1785 msgid "Font Color" msgstr "" #: appGUI/ObjectUI.py:1787 msgid "Set the font color for the selected text" msgstr "" #: appGUI/ObjectUI.py:1804 msgid "Selection Color" msgstr "" #: appGUI/ObjectUI.py:1806 msgid "Set the selection color when doing text selection." msgstr "" #: appGUI/ObjectUI.py:1823 msgid "Tab Size" msgstr "" #: appGUI/ObjectUI.py:1825 msgid "Set the tab size. In pixels. Default value is 80 pixels." msgstr "" #: appGUI/PlotCanvas.py:244 appGUI/PlotCanvasLegacy.py:396 msgid "Axis enabled." msgstr "" #: appGUI/PlotCanvas.py:252 appGUI/PlotCanvasLegacy.py:405 msgid "Axis disabled." msgstr "" #: appGUI/PlotCanvas.py:290 appGUI/PlotCanvasLegacy.py:426 msgid "HUD enabled." msgstr "" #: appGUI/PlotCanvas.py:299 appGUI/PlotCanvasLegacy.py:433 msgid "HUD disabled." msgstr "" #: appGUI/PlotCanvas.py:395 appGUI/PlotCanvasLegacy.py:535 msgid "Grid enabled." msgstr "" #: appGUI/PlotCanvas.py:402 appGUI/PlotCanvasLegacy.py:545 msgid "Grid disabled." msgstr "" #: appGUI/PlotCanvasLegacy.py:1619 msgid "" "Could not annotate due of a difference between the number of text elements and the number " "of text positions." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1049 msgid "Preferences applied." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1069 msgid "Application will restart" msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1070 msgid "Are you sure you want to continue?" msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1159 msgid "Preferences default values are restored." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1191 appMain.py:3134 appMain.py:10960 msgid "Failed to write defaults to file." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1195 #: appGUI/preferences/PreferencesUIManager.py:1319 msgid "Preferences saved." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1248 msgid "Preferences edited but not saved." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1302 msgid "" "One or more values are changed.\n" "Do you want to save?" msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1344 msgid "Preferences closed without saving." msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:21 #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:20 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:20 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:21 msgid "Adv. Options" msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:28 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:30 msgid "" "Export and save G-Code to\n" "make this object to a file." msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:40 msgid "Annotation Size" msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:42 msgid "The font size of the annotation text. In pixels." msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:51 msgid "Annotation Color" msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:53 msgid "Set the font color for the annotation texts." msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:30 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:29 msgid "A list of Editor parameters." msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:43 msgid "Prepend to G-Code" msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:45 msgid "" "Type here any G-Code commands you would\n" "like to add at the beginning of the G-Code file." msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:52 msgid "" "Type here any G-Code commands you would like to add at the beginning of the G-Code file." msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:59 msgid "Append to G-Code" msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:61 msgid "" "Type here any G-Code commands you would\n" "like to append to the generated file.\n" "I.e.: M2 (End of program)" msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:69 msgid "" "Type here any G-Code commands you would like to append to the generated file.\n" "I.e.: M2 (End of program)" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:44 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:61 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:53 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:64 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:43 msgid "Circle Steps" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:46 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:63 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:55 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:66 msgid "" "The number of circle steps for \n" "linear approximation of circles." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:57 msgid "Travel dia" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:59 msgid "" "The width of the travel lines to be\n" "rendered in the plot." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:74 msgid "G-code Decimals" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:85 msgid "" "The number of decimals to be used for \n" "the X, Y, Z coordinates in CNC code (GCODE, etc.)" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:96 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:155 appObjects/FlatCAMObj.py:896 #: appPlugins/ToolLevelling.py:2224 appPlugins/ToolReport.py:561 #: appPlugins/ToolSolderPaste.py:1435 msgid "Feedrate" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:98 msgid "" "The number of decimals to be used for \n" "the Feedrate parameter in CNC code (GCODE, etc.)" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:109 msgid "Coordinates type" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:111 msgid "" "The type of coordinates to be used in Gcode.\n" "Can be:\n" "- Absolute G90 -> the reference is the origin x=0, y=0\n" "- Incremental G91 -> the reference is the previous position" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:117 msgid "Absolute" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:118 msgid "Incremental" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:128 msgid "Force Windows style line-ending" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:130 msgid "" "When checked will force a Windows style line-ending\n" "(\\r\\n) on non-Windows OS's." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:144 msgid "Travel Line Color" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:154 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:203 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:304 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:162 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:203 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:151 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:234 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:242 appPlugins/ToolRulesCheck.py:1386 #: appPlugins/ToolRulesCheck.py:1401 msgid "Outline" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:156 msgid "Set the travel line color for plotted objects." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:164 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:213 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:314 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:171 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:213 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:254 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:128 #: appPlugins/ToolCopperThieving.py:1440 msgid "Fill" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:166 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:215 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:316 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:256 msgid "" "Set the fill color for plotted objects.\n" "First 6 digits are the color and the last 2\n" "digits are for alpha (transparency) level." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:176 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:326 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:184 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:226 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:266 msgid "Alpha" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:178 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:328 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:268 msgid "Set the fill transparency for plotted objects." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:193 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:294 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:141 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:223 msgid "Object Color" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:205 msgid "Set the color for plotted objects." msgstr "" #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:28 msgid "Export G-Code" msgstr "" #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:50 msgid "Plot kind" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:20 msgid "Pre-Processors" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:25 msgid "Compensation" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:27 msgid "Compensate CNC bed issues." msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:38 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:50 msgid "Bed Size" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:40 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:52 msgid "CNC bed size on direction" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:62 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:74 msgid "Bed Offset" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:64 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:76 msgid "CNC bed offset on direction" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:86 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:98 msgid "Bed Skew" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:88 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:100 msgid "CNC bed skew on direction" msgstr "" #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:27 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:27 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:275 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:292 msgid "Advanced Options" msgstr "" #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:29 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:29 msgid "" "A list of advanced parameters.\n" "Those parameters are available only for\n" "Advanced App. Level." msgstr "" #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:42 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:44 msgid "Table Show/Hide" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:28 msgid "A list of Excellon Editor parameters." msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:39 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:40 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:42 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:169 msgid "Selection limit" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:41 msgid "" "Set the number of selected Excellon geometry\n" "items above which the utility geometry\n" "becomes just a selection rectangle.\n" "Increases the performance when moving a\n" "large number of geometric elements." msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:54 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:115 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:116 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:118 msgid "New Dia" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:67 msgid "Nr of drills" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:82 msgid "Linear Drill Array" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:92 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:262 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:132 msgid "Linear Direction" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:137 msgid "Circular Drill Array" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:147 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:319 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:186 msgid "Circular Direction" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:160 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:332 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:199 msgid "Circular Angle" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:239 msgid "Linear Slot Array" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:249 msgid "Nr of slots" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:309 msgid "Circular Slot Array" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:26 #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:26 msgid "Export Options" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:28 msgid "" "The parameters set here are used in the file exported\n" "when using the File -> Export -> Export Excellon menu entry." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:40 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:187 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:31 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:35 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:96 appPlugins/ToolPcbWizard.py:498 #: appPlugins/ToolReport.py:182 msgid "Units" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:42 #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:48 msgid "The units used in the Excellon file." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:45 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:197 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:40 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:101 appPlugins/ToolPcbWizard.py:496 #: appPlugins/ToolReport.py:368 appPlugins/ToolReport.py:372 appPlugins/ToolReport.py:374 msgid "Inch" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:55 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:50 msgid "Int/Decimals" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:57 msgid "" "The NC drill files, usually named Excellon files\n" "are files that can be found in different formats.\n" "Here we set the format used when the provided\n" "coordinates are not using period." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:69 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:119 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:148 msgid "" "This numbers signify the number of digits in\n" "the whole part of Excellon coordinates." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:82 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:132 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:161 msgid "" "This numbers signify the number of digits in\n" "the decimal part of Excellon coordinates." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:92 #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:40 msgid "Format" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:94 #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:104 msgid "" "Select the kind of coordinates format used.\n" "Coordinates can be saved with decimal point or without.\n" "When there is no decimal point, it is required to specify\n" "the number of digits for integer part and the number of decimals.\n" "Also it will have to be specified if LZ = leading zeros are kept\n" "or TZ = trailing zeros are kept." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:101 msgid "Decimal" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:102 msgid "No-Decimal" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:116 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:169 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:91 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:111 msgid "Zeros" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:119 msgid "" "This sets the type of Excellon zeros.\n" "If LZ then Leading Zeros are kept and\n" "Trailing Zeros are removed.\n" "If TZ is checked then Trailing Zeros are kept\n" "and Leading Zeros are removed." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:126 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:182 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:101 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:121 appPlugins/ToolPcbWizard.py:481 msgid "LZ" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:127 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:183 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:102 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:122 appPlugins/ToolPcbWizard.py:482 msgid "TZ" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:129 msgid "" "This sets the default type of Excellon zeros.\n" "If LZ then Leading Zeros are kept and\n" "Trailing Zeros are removed.\n" "If TZ is checked then Trailing Zeros are kept\n" "and Leading Zeros are removed." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:140 msgid "Slot type" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:143 #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:153 msgid "" "This sets how the slots will be exported.\n" "If ROUTED then the slots will be routed\n" "using M15/M16 commands.\n" "If DRILLED(G85) the slots will be exported\n" "using the Drilled slot command (G85)." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:150 msgid "Routed" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:151 msgid "Drilled(G85)" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:54 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:46 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:57 msgid "M-Color" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:80 appPlugins/ToolPcbWizard.py:454 msgid "Excellon Format" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:82 msgid "" "The NC drill files, usually named Excellon files\n" "are files that can be found in different formats.\n" "Here we set the format used when the provided\n" "coordinates are not using period.\n" "\n" "Possible presets:\n" "\n" "PROTEUS 3:3 MM LZ\n" "DipTrace 5:2 MM TZ\n" "DipTrace 4:3 MM LZ\n" "\n" "EAGLE 3:3 MM TZ\n" "EAGLE 4:3 MM TZ\n" "EAGLE 2:5 INCH TZ\n" "EAGLE 3:5 INCH TZ\n" "\n" "ALTIUM 2:4 INCH LZ\n" "Sprint Layout 2:4 INCH LZ\n" "KiCAD 3:5 INCH TZ" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:111 msgid "INCH" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:112 msgid "Default values for INCH are 2:4" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:140 msgid "METRIC" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:141 msgid "Default values for METRIC are 3:3" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:172 msgid "" "This sets the type of Excellon zeros.\n" "If LZ then Leading Zeros are kept and\n" "Trailing Zeros are removed.\n" "If TZ is checked then Trailing Zeros are kept\n" "and Leading Zeros are removed.\n" "\n" "This is used when there is no information\n" "stored in the Excellon file." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:190 msgid "" "This sets the default units of Excellon files.\n" "If it is not detected in the parsed file the value here\n" "will be used.Some Excellon files don't have an header\n" "therefore this parameter will be used." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:200 msgid "" "This sets the units of Excellon files.\n" "Some Excellon files don't have an header\n" "therefore this parameter will be used." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:208 msgid "Update Export settings" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:223 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:72 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:107 appPlugins/ToolPanelize.py:1373 msgid "Path Optimization" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:232 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:81 msgid "Algorithm:" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:234 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:83 msgid "" "This sets the path optimization algorithm.\n" "- Rtre -> Rtree algorithm\n" "- MetaHeuristic -> Google OR-Tools algorithm with\n" "MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n" "- Basic -> Using Google OR-Tools Basic algorithm\n" "- TSA -> Using Travelling Salesman algorithm\n" "\n" "Some options are disabled when the application works in 32bit mode." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:246 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:95 msgid "Rtree" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:247 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:341 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:345 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:352 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:96 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:166 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:170 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:177 msgid "MetaHeuristic" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:248 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:341 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:345 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:352 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:97 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:166 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:170 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:177 msgid "Basic" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:249 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:98 msgid "TSA" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:255 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:104 msgid "Duration" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:258 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:106 msgid "" "When OR-Tools Metaheuristic (MH) is enabled there is a\n" "maximum threshold for how much time is spent doing the\n" "path optimization. This max duration is set here.\n" "In seconds." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:275 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:122 msgid "Join Option" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:284 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:131 msgid "Fuse Tools" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:286 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:133 msgid "" "When checked, the tools will be merged\n" "but only if they share some of their attributes." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:306 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:153 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:244 msgid "Set the line color for plotted objects." msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:29 msgid "" "Parameters used to create a CNC Job object\n" "for this drill object." msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:41 msgid "Mill Holes" msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:43 msgid "Create Geometry for milling holes." msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:47 msgid "Drill Tool dia" msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:49 msgid "" "Diameter of the cutting tool\n" "when milling drill holes." msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:59 msgid "Slot Tool dia" msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:61 msgid "" "Diameter of the cutting tool\n" "when milling slot holes." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:21 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:71 msgid "App Settings" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:40 msgid "Grid Settings" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:51 appMain.py:8625 msgid "X value" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:53 msgid "This is the Grid snap value on X axis." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:63 appMain.py:8628 msgid "Y value" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:65 msgid "This is the Grid snap value on Y axis." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:75 msgid "Snap Max" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:93 msgid "Workspace Settings" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:102 msgid "Active" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:112 msgid "" "Select the type of rectangle to be used on canvas,\n" "as valid workspace." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:178 msgid "Orientation" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:179 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:306 appPlugins/ToolFilm.py:1708 msgid "" "Can be:\n" "- Portrait\n" "- Landscape" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:183 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:165 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:310 appPlugins/ToolFilm.py:1712 #: appMain.py:8645 msgid "Portrait" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:184 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:166 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:311 appPlugins/ToolFilm.py:1713 #: appMain.py:8647 msgid "Landscape" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:204 msgid "Notebook" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:206 msgid "" "This sets the font size for the elements found in the Notebook.\n" "The notebook is the collapsible area in the left side of the GUI,\n" "and include the Project, Selected and Tool tabs." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:225 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:286 appPlugins/ToolDblSided.py:882 #: appPlugins/ToolFilm.py:1523 appMain.py:8633 msgid "Axis" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:227 msgid "This sets the font size for canvas axis." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:244 msgid "Textbox" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:246 msgid "" "This sets the font size for the Textbox GUI\n" "elements that are used in the application." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:264 appMain.py:8650 msgid "HUD" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:266 msgid "This sets the font size for the Heads Up Display." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:296 msgid "Axis Color" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:298 msgid "Set the color of the screen axis." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:308 msgid "Mouse Settings" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:318 msgid "Cursor Shape" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:320 msgid "" "Choose a mouse cursor shape.\n" "- Small -> with a customizable size.\n" "- Big -> Infinite lines" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:326 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:204 msgid "Small" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:327 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:205 msgid "Big" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:334 msgid "Cursor Size" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:336 msgid "Set the size of the mouse cursor, in pixels." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:347 msgid "Cursor Width" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:349 msgid "Set the line width of the mouse cursor, in pixels." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:360 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:367 msgid "Cursor Color" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:362 msgid "Check this box to color mouse cursor." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:369 msgid "Set the color of the mouse cursor." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:385 msgid "Pan Button" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:387 msgid "" "Select the mouse button to use for panning:\n" "- MMB --> Middle Mouse Button\n" "- RMB --> Right Mouse Button" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:391 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:237 msgid "MMB" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:392 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:238 msgid "RMB" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:398 msgid "Multi-Selection" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:400 msgid "Select the key used for multiple selection." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:402 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:244 msgid "CTRL" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:403 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:245 msgid "SHIFT" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:421 msgid "Delete object confirmation" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:423 msgid "" "When checked the application will ask for user confirmation\n" "whenever the Delete object(s) event is triggered, either by\n" "menu shortcut or key shortcut." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:429 msgid "Allow Edit" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:431 msgid "" "When checked, the user can edit the object names in the Project Tab\n" "by clicking on the object name. Active after restart." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:437 msgid "\"Open\" behavior" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:439 msgid "" "When checked the path for the last saved file is used when saving files,\n" "and the path for the last opened file is used when opening files.\n" "\n" "When unchecked the path for opening files is the one used last: either the\n" "path for saving files or the path for opening files." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:448 msgid "Enable ToolTips" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:450 msgid "" "Check this box if you want to have toolTips displayed\n" "when hovering with mouse over items throughout the App." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:459 msgid "Bookmarks limit" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:461 msgid "" "The maximum number of bookmarks that may be installed in the menu.\n" "The number of bookmarks in the bookmark manager may be greater\n" "but the menu will hold only so much." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:470 msgid "Activity Icon" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:472 msgid "Select the GIF that show activity when FlatCAM is active." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:24 msgid "App Preferences" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:32 msgid "" "The default value for the application units.\n" "Whatever is selected here is set every time\n" "the application is started." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:45 appPlugins/ToolCalculators.py:551 msgid "inch" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:52 msgid "Precision MM" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:54 msgid "" "The number of decimals used throughout the application\n" "when the set units are in METRIC system.\n" "Any change here require an application restart." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:66 msgid "Precision Inch" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:68 msgid "" "The number of decimals used throughout the application\n" "when the set units are in INCH system.\n" "Any change here require an application restart." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:92 msgid "Graphic Engine" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:93 msgid "" "Choose what graphic engine to use in FlatCAM.\n" "Legacy(2D) -> reduced functionality, slow performance but enhanced compatibility.\n" "OpenGL(3D) -> full functionality, high performance\n" "Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n" "Intel HD3000 or older. In this case the plot area will be black therefore\n" "use the Legacy(2D) mode." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:99 msgid "2D" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:100 msgid "3D" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:111 msgid "Workers number" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:113 msgid "" "The number of Qthreads made available to the App.\n" "A bigger number may finish the jobs more quickly but\n" "depending on your computer speed, may make the App\n" "unresponsive. Can have a value between 2 and 16.\n" "Default value is 2.\n" "After change, it will be applied at next App start." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:127 msgid "Geo Tolerance" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:129 msgid "" "This value can counter the effect of the Circle Steps\n" "parameter. Default value is 0.005.\n" "A lower value will increase the detail both in image\n" "and in Gcode for the circles, with a higher cost in\n" "performance. Higher value will provide more\n" "performance at the expense of level of detail." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:144 msgid "Portable app" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:145 msgid "" "Choose if the application should run as portable.\n" "\n" "If Checked the application will run portable,\n" "which means that the preferences files will be saved\n" "in the application folder, in the lib\\config subfolder." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:153 msgid "Verbose log" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:154 msgid "" "Set the log level.\n" "Values:\n" "0 -> logging is disabled\n" "1 -> logging is done only in console\n" "2 -> verbose logging with messages in the Tcl Shell\n" "Require restart." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:169 msgid "Application Level" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:170 msgid "" "Choose the default level of usage for FlatCAM.\n" "BASIC level -> reduced functionality, best for beginner's.\n" "ADVANCED level -> full functionality.\n" "\n" "The choice here will influence the parameters in\n" "the Selected Tab for all kinds of FlatCAM objects." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:192 msgid "Languages" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:193 msgid "Set the language used throughout FlatCAM." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:206 appTranslation.py:114 msgid "Apply Language" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:207 msgid "" "Set the language used throughout FlatCAM.\n" "The app will restart after click." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:216 msgid "Startup Settings" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:229 msgid "Splash Screen" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:231 msgid "Enable display of the splash screen at application startup." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:243 msgid "Sys Tray Icon" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:245 msgid "Enable display of FlatCAM icon in Sys Tray." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:250 msgid "Show Shell" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:252 msgid "" "Check this box if you want the shell to\n" "start automatically at startup." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:259 msgid "Show Project" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:261 msgid "" "Check this box if you want the project/selected/tool tab area to\n" "to be shown automatically at startup." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:267 msgid "Version Check" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:269 msgid "" "Check this box if you want to check\n" "for a new version automatically at startup." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:276 msgid "Send Statistics" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:278 msgid "" "Check this box if you agree to send anonymous\n" "stats automatically at startup, to help improve FlatCAM." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:287 msgid "Save Settings" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:300 msgid "Save Compressed Project" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:302 msgid "" "Whether to save a compressed or uncompressed project.\n" "When checked it will save a compressed FlatCAM project." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:311 msgid "Compression" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:313 msgid "" "The level of compression used when saving\n" "a FlatCAM project. Higher value means better compression\n" "but require more RAM usage and more processing time." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:324 msgid "Enable Auto Save" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:326 msgid "" "Check to enable the autosave feature.\n" "When enabled, the application will try to save a project\n" "at the set interval." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:336 msgid "Interval" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:338 msgid "" "Time interval for autosaving. In milliseconds.\n" "The application will try to save periodically but only\n" "if the project was saved manually at least once.\n" "While active, some operations may block this feature." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:349 msgid "Text to PDF parameters" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:351 msgid "Used when saving text in Code Editor or in FlatCAM Document objects." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:369 msgid "Top Margin" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:371 msgid "Distance between text body and the top of the PDF file." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:382 msgid "Bottom Margin" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:384 msgid "Distance between text body and the bottom of the PDF file." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:395 msgid "Left Margin" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:397 msgid "Distance between text body and the left of the PDF file." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:408 msgid "Right Margin" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:410 msgid "Distance between text body and the right of the PDF file." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:21 msgid "GUI Preferences" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:38 msgid "Theme" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:40 msgid "" "Select a theme for the application.\n" "It will theme the plot area." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:45 msgid "Light" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:46 msgid "Dark" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:53 msgid "Use Gray Icons" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:55 msgid "" "Check this box to use a set of icons with\n" "a lighter (gray) color. To be used when a\n" "full dark theme is applied." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:75 msgid "Layout" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:77 msgid "" "Select a layout for the application.\n" "It is applied immediately." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:97 msgid "Style" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:99 msgid "" "Select a style for the application.\n" "It will be applied at the next app start." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:114 msgid "Hover Shape" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:116 msgid "" "Enable display of a hover shape for the application objects.\n" "It is displayed whenever the mouse cursor is hovering\n" "over any kind of not-selected object." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:123 msgid "Selection Shape" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:125 msgid "" "Enable the display of a selection shape for the application objects.\n" "It is displayed whenever the mouse selects an object\n" "either by clicking or dragging mouse from left to right or\n" "right to left." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:133 msgid "GUI Layout" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:135 msgid "" "Select a GUI layout for the Preferences.\n" "Can be:\n" "'Normal' -> a normal and compact layout.\n" "'Columnar' -> a layout the auto-adjust such\n" "that columns are preferentially showed in columns" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:142 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:350 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:338 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:302 msgid "Normal" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:142 msgid "Columnar" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:149 msgid "Colors" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:159 msgid "Left-Right Selection Color" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:164 msgid "Set the line color for the 'left to right' selection box." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:173 msgid "" "Set the fill color for the selection box\n" "in case that the selection is done from left to right.\n" "First 6 digits are the color and the last 2\n" "digits are for alpha (transparency) level." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:186 msgid "Set the fill transparency for the 'left to right' selection box." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:199 msgid "Right-Left Selection Color" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:205 msgid "Set the line color for the 'right to left' selection box." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:215 msgid "" "Set the fill color for the selection box\n" "in case that the selection is done from right to left.\n" "First 6 digits are the color and the last 2\n" "digits are for alpha (transparency) level." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:228 msgid "Set the fill transparency for selection 'right to left' box." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:244 msgid "Editor Color" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:248 msgid "Drawing" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:250 msgid "Set the color for the shape." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:260 msgid "Set the color of the shape when selected." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:276 msgid "Project Items Color" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:280 msgid "Enabled" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:282 msgid "Set the color of the items in Project Tab Tree." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:289 msgid "Disabled" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:291 msgid "" "Set the color of the items in Project Tab Tree,\n" "for the case when the items are disabled." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:302 msgid "Project AutoHide" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:304 msgid "" "Check this box if you want the project/selected/tool tab area to\n" "hide automatically when there are no objects loaded and\n" "to show whenever a new object is created." msgstr "" #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:42 #: appPlugins/ToolMilling.py:4941 msgid "Segment X size" msgstr "" #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:44 #: appPlugins/ToolMilling.py:4943 msgid "" "The size of the trace segment on the X axis.\n" "Useful for auto-leveling.\n" "A value of 0 means no segmentation on the X axis." msgstr "" #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:58 #: appPlugins/ToolMilling.py:4958 msgid "Segment Y size" msgstr "" #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:60 #: appPlugins/ToolMilling.py:4960 msgid "" "The size of the trace segment on the Y axis.\n" "Useful for auto-leveling.\n" "A value of 0 means no segmentation on the Y axis." msgstr "" #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:42 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:171 msgid "" "Set the number of selected geometry\n" "items above which the utility geometry\n" "becomes just a selection rectangle.\n" "Increases the performance when moving a\n" "large number of geometric elements." msgstr "" #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:28 msgid "" "The parameters set here are used in the file exported\n" "when using the File -> Export -> Export DXF menu entry." msgstr "" #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:42 msgid "Autodesk DXF Format used when exporting Geometry as DXF." msgstr "" #: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:40 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:70 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:86 appPlugins/ToolCutOut.py:2419 #: appPlugins/ToolIsolation.py:3610 appPlugins/ToolMilling.py:1985 #: appPlugins/ToolMilling.py:4585 msgid "" "Cutting depth (negative)\n" "below the copper surface." msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:35 msgid "\"Follow\"" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:58 msgid "" "Buffering type:\n" "- None --> best performance, fast file loading but no so good display\n" "- Full --> slow file loading but good visuals. This is the default.\n" "<>: Don't change this unless you know what you are doing !!!" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:63 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:72 appObjects/FlatCAMObj.py:818 #: appObjects/FlatCAMObj.py:821 appObjects/FlatCAMObj.py:824 appObjects/FlatCAMObj.py:854 #: appObjects/FlatCAMObj.py:861 appObjects/FlatCAMObj.py:864 #: appPlugins/ToolCopperThieving.py:1764 appPlugins/ToolFiducials.py:1007 #: appPlugins/ToolReport.py:483 appPlugins/ToolReport.py:486 appPlugins/ToolReport.py:489 #: appPlugins/ToolReport.py:519 appPlugins/ToolReport.py:526 appPlugins/ToolReport.py:529 msgid "None" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:69 msgid "Delayed Buffering" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:71 msgid "When checked it will do the buffering in background." msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:78 msgid "" "When checked all the Gerber polygons will be\n" "loaded with simplification having a set tolerance.\n" "<>: Don't change this unless you know what you are doing !!!" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:86 msgid "Tolerance for polygon simplification." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:31 msgid "A list of Gerber Editor parameters." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:44 msgid "" "Set the number of selected Gerber geometry\n" "items above which the utility geometry\n" "becomes just a selection rectangle.\n" "Increases the performance when moving a\n" "large number of geometric elements." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:57 msgid "New Aperture code" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:70 msgid "New Aperture size" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:72 msgid "Size for the new aperture" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:83 msgid "New Aperture type" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:85 msgid "" "Type for the new aperture.\n" "Can be 'C', 'R' or 'O'." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:107 msgid "Aperture Dimensions" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:109 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:44 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:43 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:45 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:47 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:44 msgid "" "Diameters of the tools, separated by comma.\n" "The value of the diameter has to use the dot decimals separator.\n" "Valid values: 0.3, 1.0" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:121 msgid "Linear Pad Array" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:175 msgid "Circular Pad Array" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:228 msgid "Distance at which to buffer the Gerber element." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:240 msgid "Scale Tool" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:253 msgid "Factor to scale the Gerber element." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:276 msgid "Threshold low" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:278 msgid "Threshold value under which the apertures are not marked." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:288 msgid "Threshold high" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:290 msgid "Threshold value over which the apertures are not marked." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:37 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:43 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:98 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:104 msgid "The units used in the Gerber file." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:52 msgid "" "The number of digits in the whole part of the number\n" "and in the fractional part of the number." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:65 msgid "" "This numbers signify the number of digits in\n" "the whole part of Gerber coordinates." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:81 msgid "" "This numbers signify the number of digits in\n" "the decimal part of Gerber coordinates." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:94 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:104 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:114 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:124 msgid "" "This sets the type of Gerber zeros.\n" "If LZ then Leading Zeros are removed and\n" "Trailing Zeros are kept.\n" "If TZ is checked then Trailing Zeros are removed\n" "and Leading Zeros are kept." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:80 msgid "Default Values" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:82 msgid "" "Those values will be used as fallback values\n" "in case that they are not found in the Gerber file." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:148 msgid "Clean Apertures" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:150 msgid "" "Will remove apertures that do not have geometry\n" "thus lowering the number of apertures in the Gerber object." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:156 msgid "Polarity change buffer" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:158 msgid "" "Will apply extra buffering for the\n" "solid geometry when we have polarity changes.\n" "May help loading Gerber files that otherwise\n" "do not load correctly." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:166 msgid "Plot on Select" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:168 msgid "When active, selecting an object in the Project tab will replot it above the others." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:176 msgid "Layers" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:187 msgid "Store colors" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:189 msgid "" "It will store the set colors for Gerber objects.\n" "Those will be used each time the application is started." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:196 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:354 msgid "Color manager" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:199 msgid "Manage colors associated with Gerber objects." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:208 msgid "Reset the colors associated with Gerber objects." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:236 msgid "" "If checked, the polygon outline will be plotted on canvas.\n" "Plotting the outline require more processing power but looks nicer." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:329 msgid "Stored colors for Gerber objects are deleted." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:376 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:380 msgid "Color" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:391 msgid "Add a new layer." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:399 msgid "Delete the last layers." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:446 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:507 appObjects/AppObject.py:323 #: appMain.py:9167 appMain.py:9216 appMain.py:9225 msgid "Layer" msgstr "" #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:62 #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:93 msgid "Rounded Geo" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:21 msgid "Copper Thieving Plugin" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:30 msgid "" "A tool to generate a Copper Thieving that can be added\n" "to a selected Gerber file." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:45 msgid "Number of steps (lines) used to interpolate circles." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:55 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:326 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:268 #: appPlugins/ToolCopperThieving.py:1328 appPlugins/ToolCopperThieving.py:1717 #: appPlugins/ToolExtract.py:1321 msgid "Clearance" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:57 msgid "" "This set the distance between the copper Thieving components\n" "(the polygon fill may be split in multiple polygons)\n" "and the copper traces in the Gerber file." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:85 #: appPlugins/ToolCopperThieving.py:1359 msgid "Thieving areas with area less then this value will not be added." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:97 #: appPlugins/ToolCopperThieving.py:1380 msgid "Reference:" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:99 #: appPlugins/ToolCopperThieving.py:1382 msgid "" "- 'Itself' - the copper thieving extent is based on the object extent.\n" "- 'Area Selection' - left mouse click to start selection of the area to be filled.\n" "- 'Reference Object' - will do copper thieving within the area specified by another " "object." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:308 appPlugins/ToolCopperThieving.py:1387 #: appPlugins/ToolNCC.py:4559 msgid "Itself" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:309 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:308 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279 #: appPlugins/ToolCopperThieving.py:1387 appPlugins/ToolFollow.py:751 #: appPlugins/ToolIsolation.py:3832 appPlugins/ToolNCC.py:4559 appPlugins/ToolPaint.py:3316 msgid "Area Selection" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:309 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:308 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279 #: appPlugins/ToolCopperThieving.py:1387 appPlugins/ToolIsolation.py:3832 #: appPlugins/ToolNCC.py:4559 appPlugins/ToolPaint.py:3316 msgid "Reference Object" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:111 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:67 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:201 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:67 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:198 #: appPlugins/ToolCopperThieving.py:1425 appPlugins/ToolCutOut.py:425 #: appPlugins/ToolExtract.py:1057 appPlugins/ToolExtract.py:1206 #: appPlugins/ToolPunchGerber.py:2087 appPlugins/ToolPunchGerber.py:2258 msgid "Rectangular" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:112 #: appPlugins/ToolCopperThieving.py:1426 msgid "Minimal" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:114 #: appPlugins/ToolCopperThieving.py:1419 appPlugins/ToolFilm.py:1317 #: appPlugins/ToolPanelize.py:1257 msgid "Box Type" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:116 #: appPlugins/ToolCopperThieving.py:1421 msgid "" "- 'Rectangular' - the bounding box will be of rectangular shape.\n" "- 'Minimal' - the bounding box will be the convex hull shape." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:130 #: appPlugins/ToolCopperThieving.py:1442 msgid "" "- 'Solid' - copper thieving will be a solid polygon.\n" "- 'Dots Grid' - the empty area will be filled with a pattern of dots.\n" "- 'Squares Grid' - the empty area will be filled with a pattern of squares.\n" "- 'Lines Grid' - the empty area will be filled with a pattern of lines." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137 #: appPlugins/ToolCopperThieving.py:1449 msgid "Dots Grid" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137 #: appPlugins/ToolCopperThieving.py:1449 msgid "Squares Grid" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137 #: appPlugins/ToolCopperThieving.py:1449 msgid "Lines Grid" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:145 #: appPlugins/ToolCopperThieving.py:1470 msgid "Dots Grid Parameters" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:158 #: appPlugins/ToolCopperThieving.py:1476 msgid "Dot diameter in Dots Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:171 #: appPlugins/ToolCopperThieving.py:1489 msgid "Distance between each two dots in Dots Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:184 #: appPlugins/ToolCopperThieving.py:1516 msgid "Squares Grid Parameters" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:197 #: appPlugins/ToolCopperThieving.py:1522 msgid "Square side size in Squares Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:210 #: appPlugins/ToolCopperThieving.py:1535 msgid "Distance between each two squares in Squares Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:223 #: appPlugins/ToolCopperThieving.py:1562 msgid "Lines Grid Parameters" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:236 #: appPlugins/ToolCopperThieving.py:1568 msgid "Line thickness size in Lines Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:249 #: appPlugins/ToolCopperThieving.py:1581 msgid "Distance between each two lines in Lines Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:262 #: appPlugins/ToolCopperThieving.py:1612 msgid "Robber Bar Parameters" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:264 #: appPlugins/ToolCopperThieving.py:1614 msgid "" "Parameters used for the robber bar.\n" "Robber bar = copper border to help in pattern hole plating." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:279 #: appPlugins/ToolCopperThieving.py:1634 msgid "Bounding box margin for robber bar." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:290 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:311 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:54 #: appPlugins/ToolCopperThieving.py:1645 appPlugins/ToolExtract.py:1381 #: appPlugins/ToolMarkers.py:1234 msgid "Thickness" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:292 #: appPlugins/ToolCopperThieving.py:1647 msgid "The robber bar thickness." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:305 #: appPlugins/ToolCopperThieving.py:1680 msgid "Pattern Plating Mask" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:307 #: appPlugins/ToolCopperThieving.py:1682 msgid "Generate a mask for pattern plating." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:319 #: appPlugins/ToolCopperThieving.py:1710 msgid "Only Pads" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:321 #: appPlugins/ToolCopperThieving.py:1712 msgid "Select only pads in case the selected object is a copper Gerber." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:328 #: appPlugins/ToolCopperThieving.py:1719 msgid "" "The distance between the possible copper thieving elements\n" "and/or robber bar and the actual openings in the mask." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:342 #: appPlugins/ToolCopperThieving.py:1755 msgid "Choose which additional geometry to include, if available." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:183 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:589 #: appPlugins/ToolCopperThieving.py:1764 appPlugins/ToolFilm.py:1521 #: appPlugins/ToolMilling.py:4327 msgid "Both" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345 #: appPlugins/ToolCopperThieving.py:549 appPlugins/ToolCopperThieving.py:553 #: appPlugins/ToolCopperThieving.py:615 appPlugins/ToolCopperThieving.py:1317 #: appPlugins/ToolCopperThieving.py:1764 msgid "Thieving" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345 #: appPlugins/ToolCopperThieving.py:1764 msgid "Robber bar" msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:21 msgid "Calibration Plugin" msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:30 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:29 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:29 #: appPlugins/ToolCopperThieving.py:1318 appPlugins/ToolEtchCompensation.py:407 #: appPlugins/ToolFiducials.py:964 appPlugins/ToolMarkers.py:1210 #: appPlugins/ToolObjectDistance.py:462 appPlugins/ToolOptimal.py:526 #: appPlugins/ToolSolderPaste.py:1322 msgid "Parameters used for this tool." msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:42 appPlugins/ToolCalibration.py:901 msgid "Source Type" msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:43 appPlugins/ToolCalibration.py:902 msgid "" "The source of calibration points.\n" "It can be:\n" "- Object -> click a hole geo for Excellon or a pad for Gerber\n" "- Free -> click freely on canvas to acquire the calibration points" msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:48 appPlugins/ToolCalibration.py:907 msgid "Free" msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:62 appPlugins/ToolCalibration.py:796 msgid "Height (Z) for travelling between the points." msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:74 appPlugins/ToolCalibration.py:808 msgid "Verification Z" msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:76 appPlugins/ToolCalibration.py:810 msgid "Height (Z) for checking the point." msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:88 appPlugins/ToolCalibration.py:822 msgid "Zero Z tool" msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:90 appPlugins/ToolCalibration.py:824 msgid "" "Include a sequence to zero the height (Z)\n" "of the verification tool." msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:97 appPlugins/ToolCalibration.py:873 msgid "Second point" msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:99 appPlugins/ToolCalibration.py:875 msgid "" "Second point in the Gcode verification can be:\n" "- top-left -> the user will align the PCB vertically\n" "- bottom-right -> the user will align the PCB horizontally" msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:103 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:101 appPlugins/ToolCalibration.py:879 #: appPlugins/ToolFilm.py:1409 appPlugins/ToolMarkers.py:1338 msgid "Top Left" msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:104 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:101 appPlugins/ToolCalibration.py:880 #: appPlugins/ToolFilm.py:1409 appPlugins/ToolMarkers.py:1350 msgid "Bottom Right" msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:113 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:142 appPlugins/ToolSolderPaste.py:1400 msgid "Tool change" msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:125 appPlugins/ToolCalibration.py:847 msgid "" "Toolchange X,Y position.\n" "If no value is entered then the current\n" "(x, y) point will be used," msgstr "" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:138 appPlugins/ToolCalibration.py:833 msgid "Height (Z) for mounting the verification probe." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:20 msgid "Extract Drills Options" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:27 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:27 #: appPlugins/ToolExtract.py:1000 appPlugins/ToolPunchGerber.py:2034 msgid "Processed Pads Type" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:29 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:29 #: appPlugins/ToolExtract.py:1002 appPlugins/ToolPunchGerber.py:2036 msgid "" "The type of pads shape to be processed.\n" "If the PCB has many SMD pads with rectangular pads,\n" "disable the Rectangular aperture." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:45 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:45 #: appPlugins/ToolExtract.py:1035 appPlugins/ToolPunchGerber.py:2065 msgid "Process Circular Pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:51 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:175 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:51 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:172 #: appPlugins/ToolExtract.py:1041 appPlugins/ToolExtract.py:1180 #: appPlugins/ToolPunchGerber.py:2071 appPlugins/ToolPunchGerber.py:2232 msgid "Oblong" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:53 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:53 #: appPlugins/ToolExtract.py:1043 appPlugins/ToolPunchGerber.py:2073 msgid "Process Oblong Pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:61 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:61 #: appPlugins/ToolExtract.py:1051 appPlugins/ToolPunchGerber.py:2081 msgid "Process Square Pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:69 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:69 #: appPlugins/ToolExtract.py:1059 appPlugins/ToolPunchGerber.py:2089 msgid "Process Rectangular Pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:75 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:214 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:75 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:211 appObjects/FlatCAMObj.py:562 #: appPlugins/ToolExtract.py:1065 appPlugins/ToolExtract.py:1219 #: appPlugins/ToolPunchGerber.py:2095 appPlugins/ToolPunchGerber.py:2271 #: appPlugins/ToolReport.py:200 msgid "Others" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:77 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:77 #: appPlugins/ToolExtract.py:1067 appPlugins/ToolPunchGerber.py:2097 msgid "Process pads not in the categories above." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:98 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:122 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:99 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:119 #: appPlugins/ToolExtract.py:1127 appPlugins/ToolExtract.py:1243 #: appPlugins/ToolPunchGerber.py:2150 appPlugins/ToolPunchGerber.py:2178 msgid "Fixed Diameter" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:99 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:147 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:100 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:144 #: appPlugins/ToolExtract.py:1129 appPlugins/ToolExtract.py:1158 #: appPlugins/ToolPunchGerber.py:2152 appPlugins/ToolPunchGerber.py:2206 msgid "Fixed Annular Ring" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:100 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:101 #: appPlugins/ToolExtract.py:1128 appPlugins/ToolPunchGerber.py:2151 msgid "Proportional" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:106 appPlugins/ToolExtract.py:1118 msgid "" "The method for processing pads. Can be:\n" "- Fixed Diameter -> all holes will have a set size\n" "- Fixed Annular Ring -> all holes will have a set annular ring\n" "- Proportional -> each hole size will be a fraction of the pad size" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:138 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:135 #: appPlugins/ToolExtract.py:1253 appPlugins/ToolPunchGerber.py:2188 msgid "Fixed hole diameter." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:149 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:146 #: appPlugins/ToolExtract.py:1160 appPlugins/ToolPunchGerber.py:2208 msgid "" "The size of annular ring.\n" "The copper sliver between the hole exterior\n" "and the margin of the copper pad." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:164 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:161 #: appPlugins/ToolExtract.py:1169 appPlugins/ToolPunchGerber.py:2221 msgid "The size of annular ring for circular pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:177 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:174 #: appPlugins/ToolExtract.py:1182 appPlugins/ToolPunchGerber.py:2234 msgid "The size of annular ring for oblong pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:190 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:187 #: appPlugins/ToolExtract.py:1195 appPlugins/ToolPunchGerber.py:2247 msgid "The size of annular ring for square pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:203 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:200 #: appPlugins/ToolExtract.py:1208 appPlugins/ToolPunchGerber.py:2260 msgid "The size of annular ring for rectangular pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:216 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:213 #: appPlugins/ToolExtract.py:1221 appPlugins/ToolPunchGerber.py:2273 msgid "The size of annular ring for other pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:229 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:226 #: appPlugins/ToolExtract.py:1271 appPlugins/ToolPunchGerber.py:2285 msgid "Proportional Diameter" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:244 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:241 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:68 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:133 appPlugins/ToolFilm.py:1376 #: appPlugins/ToolFilm.py:1452 msgid "Factor" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:246 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:243 #: appPlugins/ToolExtract.py:1282 appPlugins/ToolPunchGerber.py:2296 msgid "" "Proportional Diameter.\n" "The hole diameter will be a fraction of the pad size." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:256 appPlugins/ToolExtract.py:1309 #: appPlugins/ToolExtract.py:1337 msgid "Extract Soldermask" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:258 appPlugins/ToolExtract.py:1311 #: appPlugins/ToolExtract.py:1340 msgid "Extract soldermask from a given Gerber file." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:270 appPlugins/ToolExtract.py:1323 msgid "" "This set how much the soldermask extends\n" "beyond the margin of the pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:284 appPlugins/ToolExtract.py:1354 #: appPlugins/ToolExtract.py:1399 msgid "Extract Cutout" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:286 appPlugins/ToolExtract.py:1356 #: appPlugins/ToolExtract.py:1402 msgid "Extract a cutout from a given Gerber file." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:313 appPlugins/ToolExtract.py:1383 msgid "The thickness of the line that makes the cutout geometry." msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:20 msgid "Fiducials Plugin" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:42 appPlugins/ToolFiducials.py:977 msgid "" "This set the fiducial diameter if fiducial type is circular,\n" "otherwise is the size of the fiducial.\n" "The soldermask opening is double than that." msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:70 #: appPlugins/ToolFiducials.py:1005 msgid "Up" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:71 #: appPlugins/ToolFiducials.py:1006 msgid "Down" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74 #: appPlugins/ToolFiducials.py:1009 msgid "Second fiducial" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:76 #: appPlugins/ToolFiducials.py:1011 msgid "" "The position for the second fiducial.\n" "- 'Up' - the order is: bottom-left, top-left, top-right.\n" "- 'Down' - the order is: bottom-left, bottom-right, top-right.\n" "- 'None' - there is no second fiducial. The order is: bottom-left, top-right." msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:90 #: appPlugins/ToolFiducials.py:1025 msgid "Fiducial Type" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:92 #: appPlugins/ToolFiducials.py:1027 msgid "" "The type of fiducial.\n" "- 'Circular' - this is the regular fiducial.\n" "- 'Cross' - cross lines fiducial.\n" "- 'Chess' - chess pattern fiducial." msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:99 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:47 appPlugins/ToolFiducials.py:1034 #: appPlugins/ToolMarkers.py:1227 msgid "Cross" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:99 #: appPlugins/ToolFiducials.py:1034 msgid "Chess" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:105 #: appPlugins/ToolFiducials.py:1040 msgid "Line thickness" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:132 #: appPlugins/ToolFiducials.py:1072 appPlugins/ToolMarkers.py:1383 msgid "Auto" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:133 #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:67 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:48 appPlugins/ToolCutOut.py:2572 #: appPlugins/ToolDblSided.py:1083 appPlugins/ToolFiducials.py:1073 #: appPlugins/ToolLevelling.py:1923 appPlugins/ToolMarkers.py:1384 #: appPlugins/ToolPunchGerber.py:2327 msgid "Manual" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:135 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:41 appPlugins/ToolLevelling.py:1916 #: appPlugins/ToolMarkers.py:1376 msgid "Mode" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:137 #: appPlugins/ToolFiducials.py:1077 msgid "" "- 'Auto' - automatic placement of fiducials in the corners of the bounding box.\n" "- 'Manual' - manual placement of fiducials." msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:20 msgid "Invert Gerber Plugin" msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:29 msgid "" "A tool to invert Gerber geometry from positive to negative\n" "and in revers." msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:43 appPlugins/ToolInvertGerber.py:271 msgid "" "Distance by which to avoid\n" "the edges of the Gerber object." msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:57 appPlugins/ToolInvertGerber.py:282 msgid "Lines Join Style" msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:59 appPlugins/ToolInvertGerber.py:284 msgid "" "The way that the lines in the object outline will be joined.\n" "Can be:\n" "- rounded -> an arc is added between two joining lines\n" "- square -> the lines meet in 90 degrees angle\n" "- bevel -> the lines are joined by a third line" msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:78 appPlugins/ToolInvertGerber.py:293 msgid "Bevel" msgstr "" #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:20 msgid "Optimal Plugin" msgstr "" #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:29 msgid "" "A tool to find the minimum distance between\n" "every two Gerber geometric elements" msgstr "" #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:45 appPlugins/ToolOptimal.py:536 msgid "Precision" msgstr "" #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:47 msgid "Number of decimals for the distances and coordinates in this tool." msgstr "" #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:20 msgid "Punch Gerber Options" msgstr "" #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:107 #: appPlugins/ToolPunchGerber.py:2132 msgid "" "The punch hole source can be:\n" "- Excellon Object-> the Excellon object drills center will serve as reference.\n" "- Fixed Diameter -> will try to use the pads center as reference adding fixed diameter " "holes.\n" "- Fixed Annular Ring -> will try to keep a set annular ring.\n" "- Proportional -> will make a Gerber punch hole having the diameter a percentage of the " "pad diameter." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:20 msgid "QRCode Plugin" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:29 msgid "" "A tool to create a QRCode that can be inserted\n" "into a selected Gerber file, or it can be exported as a file." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:42 appPlugins/ToolQRCode.py:827 #: appMain.py:8613 msgid "Version" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:44 appPlugins/ToolQRCode.py:829 msgid "" "QRCode version can have values from 1 (21x21 boxes)\n" "to 40 (177x177 boxes)." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:55 appPlugins/ToolQRCode.py:840 msgid "Error correction" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:57 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:68 appPlugins/ToolQRCode.py:842 #: appPlugins/ToolQRCode.py:853 #, python-format msgid "" "Parameter that controls the error correction used for the QR Code.\n" "L = maximum 7%% errors can be corrected\n" "M = maximum 15%% errors can be corrected\n" "Q = maximum 25%% errors can be corrected\n" "H = maximum 30%% errors can be corrected." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:78 appPlugins/ToolQRCode.py:863 msgid "Box Size" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:80 appPlugins/ToolQRCode.py:865 msgid "" "Box size control the overall size of the QRcode\n" "by adjusting the size of each box in the code." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:91 appPlugins/ToolQRCode.py:876 msgid "Border Size" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:93 appPlugins/ToolQRCode.py:878 msgid "" "Size of the QRCode border. How many boxes thick is the border.\n" "Default value is 4. The width of the clearance around the QRCode." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:104 appPlugins/ToolQRCode.py:785 msgid "QRCode Data" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:106 appPlugins/ToolQRCode.py:787 msgid "QRCode Data. Alphanumeric text to be encoded in the QRCode." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:110 appPlugins/ToolQRCode.py:801 msgid "Add here the text to be included in the QRCode..." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:116 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:237 appPlugins/ToolFilm.py:1591 #: appPlugins/ToolQRCode.py:889 msgid "Polarity" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:118 appPlugins/ToolQRCode.py:891 msgid "" "Choose the polarity of the QRCode.\n" "It can be drawn in a negative way (squares are clear)\n" "or in a positive way (squares are opaque)." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:122 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:236 appPlugins/ToolFilm.py:1589 #: appPlugins/ToolQRCode.py:895 msgid "Negative" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:123 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:235 appPlugins/ToolFilm.py:1588 #: appPlugins/ToolQRCode.py:896 msgid "Positive" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:125 appPlugins/ToolQRCode.py:898 msgid "" "Choose the type of QRCode to be created.\n" "If added on a Silkscreen Gerber file the QRCode may\n" "be added as positive. If it is added to a Copper Gerber\n" "file then perhaps the QRCode can be added as negative." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:136 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:142 appPlugins/ToolQRCode.py:909 #: appPlugins/ToolQRCode.py:915 msgid "" "The bounding box, meaning the empty space that surrounds\n" "the QRCode geometry, can have a rounded or a square shape." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:149 appPlugins/ToolQRCode.py:943 msgid "Fill Color" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:151 appPlugins/ToolQRCode.py:945 msgid "Set the QRCode fill color (squares color)." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:159 appPlugins/ToolQRCode.py:967 msgid "Back Color" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:161 appPlugins/ToolQRCode.py:969 msgid "Set the QRCode background color." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:20 msgid "Check Rules Plugin" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:22 msgid "" "A tool to check if Gerber files are within a set\n" "of Manufacturing Rules." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:31 #: appPlugins/ToolRulesCheck.py:1224 appPlugins/ToolRulesCheck.py:1270 #: appPlugins/ToolRulesCheck.py:1336 appPlugins/ToolRulesCheck.py:1478 msgid "Copper" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:31 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:130 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:208 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:243 #: appPlugins/ToolRulesCheck.py:1224 appPlugins/ToolRulesCheck.py:1231 #: appPlugins/ToolRulesCheck.py:1238 appPlugins/ToolRulesCheck.py:1245 #: appPlugins/ToolRulesCheck.py:1478 appPlugins/ToolRulesCheck.py:1588 #: appPlugins/ToolRulesCheck.py:1675 appPlugins/ToolRulesCheck.py:1713 msgid "Rules" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:41 #: appPlugins/ToolRulesCheck.py:459 appPlugins/ToolRulesCheck.py:1488 msgid "Trace Size" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:43 #: appPlugins/ToolRulesCheck.py:1490 msgid "This checks if the minimum size for traces is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:50 #: appPlugins/ToolRulesCheck.py:1497 msgid "Minimum acceptable trace size." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:62 #: appPlugins/ToolRulesCheck.py:691 appPlugins/ToolRulesCheck.py:721 #: appPlugins/ToolRulesCheck.py:1511 msgid "Copper to Copper clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:64 #: appPlugins/ToolRulesCheck.py:1513 msgid "" "This checks if the minimum clearance between copper\n" "features is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:72 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:94 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:150 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:172 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:194 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:229 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:263 #: appPlugins/ToolRulesCheck.py:1521 appPlugins/ToolRulesCheck.py:1546 #: appPlugins/ToolRulesCheck.py:1608 appPlugins/ToolRulesCheck.py:1633 #: appPlugins/ToolRulesCheck.py:1658 appPlugins/ToolRulesCheck.py:1696 #: appPlugins/ToolRulesCheck.py:1733 msgid "Minimum acceptable clearance value." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:84 #: appPlugins/ToolRulesCheck.py:751 appPlugins/ToolRulesCheck.py:757 #: appPlugins/ToolRulesCheck.py:770 appPlugins/ToolRulesCheck.py:777 #: appPlugins/ToolRulesCheck.py:1536 msgid "Copper to Outline clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:86 #: appPlugins/ToolRulesCheck.py:1538 msgid "" "This checks if the minimum clearance between copper\n" "features and the outline is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:106 #: appPlugins/ToolRulesCheck.py:1017 appPlugins/ToolRulesCheck.py:1023 #: appPlugins/ToolRulesCheck.py:1039 appPlugins/ToolRulesCheck.py:1046 #: appPlugins/ToolRulesCheck.py:1561 msgid "Minimum Annular Ring" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:108 #: appPlugins/ToolRulesCheck.py:1563 msgid "" "This checks if the minimum copper ring left by drilling\n" "a hole into a pad is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:116 #: appPlugins/ToolRulesCheck.py:1571 msgid "Minimum acceptable ring value." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:130 #: appPlugins/ToolRulesCheck.py:1231 appPlugins/ToolRulesCheck.py:1306 #: appPlugins/ToolRulesCheck.py:1372 appPlugins/ToolRulesCheck.py:1588 msgid "Silk" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:140 #: appPlugins/ToolRulesCheck.py:1598 msgid "Silk to Silk Clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:142 #: appPlugins/ToolRulesCheck.py:1600 msgid "" "This checks if the minimum clearance between silkscreen\n" "features and silkscreen features is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:162 #: appPlugins/ToolRulesCheck.py:860 appPlugins/ToolRulesCheck.py:866 #: appPlugins/ToolRulesCheck.py:884 appPlugins/ToolRulesCheck.py:1623 msgid "Silk to Solder Mask Clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:164 #: appPlugins/ToolRulesCheck.py:1625 msgid "" "This checks if the minimum clearance between silkscreen\n" "features and soldermask features is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:184 #: appPlugins/ToolRulesCheck.py:914 appPlugins/ToolRulesCheck.py:920 #: appPlugins/ToolRulesCheck.py:934 appPlugins/ToolRulesCheck.py:941 #: appPlugins/ToolRulesCheck.py:1648 msgid "Silk to Outline Clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:186 #: appPlugins/ToolRulesCheck.py:1650 msgid "" "This checks if the minimum clearance between silk\n" "features and the outline is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:208 #: appPlugins/ToolRulesCheck.py:1238 appPlugins/ToolRulesCheck.py:1675 msgid "Soldermask" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:218 #: appPlugins/ToolRulesCheck.py:952 appPlugins/ToolRulesCheck.py:979 #: appPlugins/ToolRulesCheck.py:1685 msgid "Minimum Solder Mask Sliver" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:220 #: appPlugins/ToolRulesCheck.py:1687 msgid "" "This checks if the minimum clearance between soldermask\n" "features and soldermask features is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:243 #: appPlugins/ToolRulesCheck.py:1245 appPlugins/ToolRulesCheck.py:1713 msgid "Holes" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:253 #: appPlugins/ToolRulesCheck.py:403 appPlugins/ToolRulesCheck.py:1723 msgid "Hole to Hole Clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:255 #: appPlugins/ToolRulesCheck.py:1725 msgid "" "This checks if the minimum clearance between a drill hole\n" "and another drill hole is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:275 #: appPlugins/ToolRulesCheck.py:377 appPlugins/ToolRulesCheck.py:1748 msgid "Hole Size" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:277 #: appPlugins/ToolRulesCheck.py:1750 msgid "" "This checks if the drill holes\n" "sizes are above the threshold." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:285 #: appPlugins/ToolRulesCheck.py:1758 msgid "Minimum acceptable drill size." msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:20 msgid "2-Sided Plugin" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:25 appPlugins/ToolDblSided.py:1041 msgid "PCB Alignment" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:27 msgid "" "A tool to help in creating a double sided\n" "PCB using alignment holes." msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:47 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:282 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:81 appPlugins/ToolCutOut.py:2751 #: appPlugins/ToolDblSided.py:1056 appPlugins/ToolMarkers.py:1421 msgid "Drill Dia" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:49 appPlugins/ToolDblSided.py:1058 #: appPlugins/ToolDblSided.py:1063 msgid "Diameter of the drill for the alignment holes." msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:58 appPlugins/ToolDblSided.py:1074 msgid "" "The content of the Excellon file.\n" "X - Pairs of drill holes mirrored vertically from reference point\n" "Y - Pairs of drill holes mirrored horizontally from reference point\n" "Manual - no mirroring; drill holes in place" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:78 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:185 msgid "Mirror Axis" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:80 appPlugins/ToolDblSided.py:883 msgid "Mirror vertically (X) or horizontally (Y)." msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:92 appPlugins/ToolDblSided.py:871 msgid "Mirror Operation" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:108 appPlugins/ToolDblSided.py:913 msgid "Box" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:109 appPlugins/ToolDblSided.py:914 #: appMain.py:8622 msgid "Snap" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:112 msgid "Axis Ref" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:114 appPlugins/ToolDblSided.py:903 msgid "" "The coordinates used as reference for the mirror operation.\n" "Can be:\n" "- Point -> a set of coordinates (x,y) around which the object is mirrored\n" "- Box -> a set of coordinates (x, y) obtained from the center of the\n" "bounding box of another object selected below\n" "- Snap -> a point defined by the center of a drill hole in a Excellon object" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:20 msgid "Calculators Plugin" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:27 msgid "V-Shape Tool Calculator" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:29 msgid "" "Calculate the tool diameter for a given V-shape tool,\n" "having the tip diameter, tip angle and\n" "depth-of-cut as parameters." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:47 #: appPlugins/ToolCalculators.py:612 msgid "Tip Diameter" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:49 #: appPlugins/ToolCalculators.py:614 msgid "" "This is the tool tip diameter.\n" "It is specified by manufacturer." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:61 #: appPlugins/ToolCalculators.py:627 msgid "Tip Angle" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:63 msgid "" "This is the angle on the tip of the tool.\n" "It is specified by manufacturer." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:77 msgid "" "This is depth to cut into material.\n" "In the CNCJob object it is the CutZ parameter." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:86 msgid "ElectroPlating Calculator" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:88 #: appPlugins/ToolCalculators.py:675 msgid "" "This calculator is useful for those who plate the via/pad/drill holes,\n" "using a method like graphite ink or calcium hypophosphite ink or palladium chloride." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:105 #: appPlugins/ToolCalculators.py:702 msgid "Board Length" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:107 msgid "This is the board length. In centimeters." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:117 #: appPlugins/ToolCalculators.py:721 appPlugins/ToolCalculators.py:722 msgid "Board Width" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:119 msgid "This is the board width.In centimeters." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:125 msgid "This is the board area." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:135 #: appPlugins/ToolCalculators.py:764 msgid "Current Density" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:141 msgid "" "Current density to pass through the board. \n" "In Amps per Square Feet ASF." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:147 #: appPlugins/ToolCalculators.py:785 msgid "Copper Growth" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:153 msgid "" "How thick the copper growth is intended to be.\n" "In microns." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:21 msgid "Cutout Plugin" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:28 msgid "" "Create toolpaths to cut around\n" "the PCB and separate it from\n" "the original board." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:46 appPlugins/ToolCutOut.py:2350 msgid "" "Diameter of the tool used to cutout\n" "the PCB shape out of the surrounding material." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:84 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:70 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:100 appPlugins/ToolCutOut.py:2432 #: appPlugins/ToolDrilling.py:2558 appPlugins/ToolMilling.py:4600 msgid "Multi-Depth" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:107 appPlugins/ToolCutOut.py:2291 msgid "Kind" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:109 appPlugins/ToolCutOut.py:2293 msgid "" "Choice of what kind the object we want to cutout is.\n" "- Single: contain a single PCB Gerber outline object.\n" "- Panel: a panel PCB Gerber object, which is made\n" "out of many individual PCB outlines." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:116 appPlugins/ToolCutOut.py:2299 msgid "Single" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:176 appPlugins/ToolCutOut.py:2514 msgid "Mouse Bytes" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:236 msgid "" "Number of gaps used for the cutout.\n" "There can be maximum 8 bridges/gaps.\n" "The choices are:\n" "- None - no gaps\n" "- lr - left + right\n" "- tb - top + bottom\n" "- 4 - left + right +top + bottom\n" "- 2lr - 2*left + 2*right\n" "- 2tb - 2*top + 2*bottom\n" "- 8 - 2*left + 2*right +2*top + 2*bottom" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:257 appPlugins/ToolCutOut.py:2637 msgid "Big cursor" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:259 appPlugins/ToolCutOut.py:2639 msgid "Use a big cursor when adding manual gaps." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:263 appPlugins/ToolCutOut.py:2715 #: appPlugins/ToolCutOut.py:2789 msgid "Cut by Drilling" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:264 appPlugins/ToolCutOut.py:2716 #: appPlugins/ToolCutOut.py:2792 msgid "Create a series of drill holes following a geometry line." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:284 appPlugins/ToolCutOut.py:2753 msgid "" "Diameter of the tool used to cutout\n" "the PCB by drilling." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:297 appPlugins/ToolCutOut.py:2766 msgid "" "Distance between the center of\n" "two neighboring drill holes." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:21 msgid "Drilling Plugin" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:30 appPlugins/ToolDrilling.py:2402 msgid "Create CNCJob with toolpaths for drilling or milling holes." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:41 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:55 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:56 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:58 appPlugins/ToolDrilling.py:2487 #: appPlugins/ToolIsolation.py:3409 appPlugins/ToolMilling.py:4153 #: appPlugins/ToolNCC.py:4187 appPlugins/ToolPaint.py:3063 msgid "Tool order" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:42 appPlugins/ToolDrilling.py:2488 #: appPlugins/ToolMilling.py:4154 msgid "" "This set the way that the tools in the tools table are used.\n" "'Default' --> the order from the file\n" "'Forward' --> tools will be ordered from small to big\n" "'Reverse' --> tools will ordered from big to small." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:48 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:65 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:67 appPlugins/ToolDrilling.py:2494 #: appPlugins/ToolIsolation.py:3418 appPlugins/ToolMilling.py:4160 #: appPlugins/ToolNCC.py:4199 appPlugins/ToolPaint.py:3072 #: appPlugins/ToolSolderPaste.py:1488 msgid "Forward" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:48 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:65 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:67 appPlugins/ToolDrilling.py:2494 #: appPlugins/ToolIsolation.py:3418 appPlugins/ToolMilling.py:4160 #: appPlugins/ToolNCC.py:4199 appPlugins/ToolPaint.py:3072 #: appPlugins/ToolSolderPaste.py:1526 msgid "Reverse" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:109 appPlugins/ToolDrilling.py:2782 #: appPlugins/ToolMilling.py:4814 msgid "" "Include tool-change sequence\n" "in G-Code (Pause for tool change)." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:115 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:152 appPlugins/ToolCalibration.py:831 msgid "Toolchange Z" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:117 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:155 appPlugins/ToolDrilling.py:2790 #: appPlugins/ToolMilling.py:4822 msgid "" "Z-axis position (height) for\n" "tool change." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:129 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:170 appPlugins/ToolDrilling.py:2833 #: appPlugins/ToolMilling.py:4852 msgid "End move Z" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:131 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:172 appPlugins/ToolDrilling.py:2835 #: appPlugins/ToolMilling.py:4854 msgid "" "Height of the tool after\n" "the last move at the end of the job." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:142 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:186 appPlugins/ToolDrilling.py:2849 #: appPlugins/ToolMilling.py:4868 msgid "End move X,Y" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:144 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:188 appPlugins/ToolDrilling.py:2851 #: appPlugins/ToolMilling.py:4870 msgid "" "End move X,Y position. In format (x,y).\n" "If no value is entered then there is no move\n" "on X,Y plane at the end of the job." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:169 msgid "Spindle Speed" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:183 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:245 msgid "Enable Dwell" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:185 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:247 appPlugins/ToolDrilling.py:2672 #: appPlugins/ToolMilling.py:4764 msgid "" "Pause to allow the spindle to reach its\n" "speed before cutting." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:193 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:253 appPlugins/ToolDrilling.py:2684 #: appPlugins/ToolMilling.py:4775 msgid "Number of time units for spindle to dwell." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:202 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:266 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:237 #: appPlugins/ToolDrilling.py:2900 appPlugins/ToolMilling.py:4919 #: appPlugins/ToolSolderPaste.py:1570 msgid "Preprocessor" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:204 msgid "" "The preprocessor JSON file that dictates\n" "Gcode output." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:229 msgid "Drilling Slots" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:277 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:294 msgid "A list of advanced parameters." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:301 msgid "Toolchange X,Y" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:303 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:307 appPlugins/ToolDrilling.py:2805 #: appPlugins/ToolMilling.py:4836 msgid "Toolchange X,Y position." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:311 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:315 appPlugins/ToolDrilling.py:2821 msgid "Start Z" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:313 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:317 appPlugins/ToolDrilling.py:2823 msgid "" "Height of the tool just after starting the work.\n" "Delete the value if you don't need this feature." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:338 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:101 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:367 appPlugins/ToolDrilling.py:2863 #: appPlugins/ToolLevelling.py:1886 appPlugins/ToolMilling.py:4882 msgid "Probe Z depth" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:340 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:103 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:369 appPlugins/ToolDrilling.py:2865 #: appPlugins/ToolLevelling.py:1888 appPlugins/ToolMilling.py:4884 msgid "" "The maximum depth that the probe is allowed\n" "to probe. Negative value, in current units." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:351 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:382 appPlugins/ToolDrilling.py:2882 #: appPlugins/ToolMilling.py:4901 msgid "Feedrate Probe" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:353 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:116 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:384 appPlugins/ToolDrilling.py:2884 #: appPlugins/ToolLevelling.py:1901 appPlugins/ToolMilling.py:4903 msgid "The feedrate used while the probe is probing." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:363 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:396 msgid "Spindle direction" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:365 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:398 msgid "" "This sets the direction that the spindle is rotating.\n" "It can be either:\n" "- CW = clockwise or\n" "- CCW = counter clockwise" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:377 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:410 appPlugins/ToolDrilling.py:2654 #: appPlugins/ToolMilling.py:4746 msgid "Min Power" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:379 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:412 appPlugins/ToolDrilling.py:2656 #: appPlugins/ToolMilling.py:4748 msgid "The laser power when the laser is travelling." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:390 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:423 msgid "Fast Plunge" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:392 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:425 msgid "" "By checking this, the vertical move from\n" "Z_Toolchange to Z_move is done with G0,\n" "meaning the fastest speed available.\n" "WARNING: the move is done at Toolchange X,Y coords." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:400 msgid "Fast Retract" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:402 msgid "" "Exit hole strategy.\n" " - When uncheked, while exiting the drilled hole the drill bit\n" "will travel slow, with set feedrate (G1), up to zero depth and then\n" "travel as fast as possible (G0) to the Z Move (travel height).\n" " - When checked the travel from Z cut (cut depth) to Z_move\n" "(travel height) is done as fast as possible (G0) in one move." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:420 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:440 msgid "Area Exclusion" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:422 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:442 msgid "Area exclusion parameters." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:433 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:453 msgid "Exclusion areas" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:436 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:456 appPlugins/ToolDrilling.py:2920 #: appPlugins/ToolMilling.py:4985 msgid "" "Include exclusion areas.\n" "In those areas the travel of the tools\n" "is forbidden." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:446 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:318 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:466 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:323 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:287 appPlugins/ToolDrilling.py:2991 #: appPlugins/ToolFollow.py:759 appPlugins/ToolIsolation.py:3895 #: appPlugins/ToolMilling.py:5057 appPlugins/ToolNCC.py:4599 appPlugins/ToolPaint.py:3350 msgid "The kind of selection shape used for area selection." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:456 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:476 appPlugins/ToolDrilling.py:2942 #: appPlugins/ToolDrilling.py:2959 appPlugins/ToolMilling.py:5008 #: appPlugins/ToolMilling.py:5025 msgid "Strategy" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:457 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:477 appPlugins/ToolDrilling.py:2960 #: appPlugins/ToolMilling.py:5026 msgid "" "The strategy followed when encountering an exclusion area.\n" "Can be:\n" "- Over -> when encountering the area, the tool will go to a set height\n" "- Around -> will avoid the exclusion area by going around the area" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:461 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:481 appPlugins/ToolDrilling.py:871 #: appPlugins/ToolDrilling.py:2964 appPlugins/ToolMilling.py:940 #: appPlugins/ToolMilling.py:5030 msgid "Over" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:462 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:482 appPlugins/ToolDrilling.py:871 #: appPlugins/ToolDrilling.py:2965 appPlugins/ToolMilling.py:940 #: appPlugins/ToolMilling.py:5031 msgid "Around" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:468 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:488 appPlugins/ToolDrilling.py:2942 #: appPlugins/ToolDrilling.py:2972 appPlugins/ToolMilling.py:5008 #: appPlugins/ToolMilling.py:5038 msgid "Over Z" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:469 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:489 appPlugins/ToolDrilling.py:2973 #: appPlugins/ToolMilling.py:5039 msgid "" "The height Z to which the tool will rise in order to avoid\n" "an interdiction area." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:21 msgid "Film Plugin" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:28 appPlugins/ToolFilm.py:1343 msgid "Adjustments" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:30 appPlugins/ToolFilm.py:1345 msgid "Compensate print distortions." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:44 appPlugins/ToolFilm.py:1359 msgid "" "A value greater than 1 will compact the film\n" "while a value less than 1 will jolt it." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:64 appPlugins/ToolFilm.py:1372 msgid "" "'Length' -> scale by a length value\n" "'Factor' -> scale by a ratio" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:159 appPlugins/ToolFilm.py:1404 #: appPlugins/ToolFilm.py:1480 msgid "The reference point to be used as origin for the adjustment." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:101 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:164 appPlugins/ToolFiducials.py:898 #: appPlugins/ToolFilm.py:1409 appPlugins/ToolFilm.py:1485 appPlugins/ToolMarkers.py:1346 msgid "Bottom Left" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:101 appPlugins/ToolFilm.py:1409 msgid "Top right" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:118 appPlugins/ToolFilm.py:1432 #: appPlugins/ToolTransform.py:726 msgid "Skew" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:109 appPlugins/ToolFilm.py:1434 msgid "" "Positive values will skew to the right\n" "while negative values will skew to the left." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:128 msgid "" "'Length' -> deform by a length value\n" "'Angle' -> deform by an angle\n" "'Factor' -> deform by a ratio between what should be and what is" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:170 appPlugins/ToolDblSided.py:1022 #: appPlugins/ToolFilm.py:1508 msgid "Mirror" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:172 appPlugins/ToolFilm.py:1510 #: appPlugins/ToolFilm.py:1525 msgid "Mirror the film geometry on the selected axis or on both." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:200 msgid "" "Create a PCB film from a Gerber or Geometry object.\n" "The file is saved in SVG format." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:215 appPlugins/ToolFilm.py:1553 msgid "" "Create a convex shape surrounding the entire PCB.\n" "If not checked the shape is rectangular." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:239 appPlugins/ToolFilm.py:1593 msgid "Generate a Positive black film or a Negative film." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:245 msgid "Film Color" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:247 msgid "Set the film color when positive film is selected." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:260 appPlugins/ToolFilm.py:1604 msgid "Border" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:262 appPlugins/ToolFilm.py:1606 msgid "" "Specify a border around the object.\n" "Only for negative film.\n" "It helps if we use as a Box Object the same \n" "object as in Film Object. It will create a thick\n" "black bar around the actual print allowing for a\n" "better delimitation of the outline features which are of\n" "white color like the rest and which may confound with the\n" "surroundings if not for this border." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:280 appPlugins/ToolFilm.py:1578 msgid "Scale Stroke" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:282 appPlugins/ToolFilm.py:1580 msgid "" "Scale the line stroke thickness of each feature in the SVG file.\n" "It means that the line that envelope each SVG feature will be thicker or thinner,\n" "therefore the fine features may be more affected by this parameter." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:289 appPlugins/ToolFilm.py:1698 msgid "SVG" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:290 appPlugins/ToolFilm.py:1699 msgid "PNG" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:291 appPlugins/ToolFilm.py:1700 msgid "PDF" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:294 appPlugins/ToolFilm.py:1689 msgid "Film Type" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:296 appPlugins/ToolFilm.py:1691 msgid "" "The file type of the saved film. Can be:\n" "- 'SVG' -> open-source vectorial format\n" "- 'PNG' -> raster image\n" "- 'PDF' -> portable document format" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:305 appPlugins/ToolFilm.py:1707 msgid "Page Orientation" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:318 appPlugins/ToolFilm.py:1723 msgid "Page Size" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:319 appPlugins/ToolFilm.py:1724 msgid "A selection of standard ISO 216 page sizes." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:386 appPlugins/ToolFilm.py:1790 msgid "Default value is 96 DPI. Change this value to scale the PNG file." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:20 msgid "Isolation Plugin" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:42 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:41 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:43 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:45 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:42 msgid "Tools Dia" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:49 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:50 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:54 msgid "Comma separated values" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:56 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:57 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:59 appPlugins/ToolIsolation.py:3410 #: appPlugins/ToolNCC.py:4188 appPlugins/ToolPaint.py:3064 msgid "" "This set the way that the tools in the tools table are used.\n" "'Default' --> means that the used order is the one in the tool table\n" "'Forward' --> means that the tools will be ordered from small to big\n" "'Reverse' --> means that the tools will ordered from big to small\n" "\n" "WARNING: using rest machining will automatically set the order\n" "in reverse and disable this control." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:70 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:53 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:71 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:73 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:80 appPlugins/ToolIsolation.py:3575 #: appPlugins/ToolMilling.py:4545 msgid "V-Tip Dia" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:72 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:56 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:73 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:75 appPlugins/ToolIsolation.py:3578 #: appPlugins/ToolMilling.py:4548 msgid "The tip diameter for V-Shape Tool" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:82 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:68 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:83 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:86 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:94 appPlugins/ToolIsolation.py:3591 #: appPlugins/ToolMilling.py:4561 msgid "V-Tip Angle" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:84 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:71 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:85 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:88 appPlugins/ToolIsolation.py:3594 #: appPlugins/ToolMilling.py:4564 msgid "" "The tip angle for V-Shape Tool.\n" "In degree." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:98 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:99 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:108 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:102 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:111 msgid "" "Depth of cut into material. Negative value.\n" "In application units." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:117 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:118 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:120 appPlugins/ToolPaint.py:3099 msgid "" "Diameter for the new tool to add in the Tool Table.\n" "If the tool is V-shape type then this value is automatically\n" "calculated from the other parameters." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:138 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:158 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141 appPlugins/ToolCutOut.py:2388 msgid "Tool Parameters" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:177 appPlugins/ToolIsolation.py:3645 msgid "Pad Passes" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:179 appPlugins/ToolIsolation.py:3647 msgid "" "Width of the extra isolation gap for pads only,\n" "in number (integer) of tool widths." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:248 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:274 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:231 appPlugins/ToolDrilling.py:2767 #: appPlugins/ToolIsolation.py:3727 appPlugins/ToolMilling.py:4799 #: appPlugins/ToolNCC.py:4474 appPlugins/ToolPaint.py:3265 msgid "Common Parameters" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:250 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:276 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:233 appPlugins/ToolDrilling.py:2769 #: appPlugins/ToolFollow.py:733 appPlugins/ToolIsolation.py:3729 #: appPlugins/ToolMilling.py:4801 appPlugins/ToolNCC.py:4476 appPlugins/ToolPaint.py:3266 #: appPlugins/ToolPanelize.py:1351 appPlugins/ToolSub.py:822 msgid "Parameters that are common for all tools." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:261 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:287 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:244 appPlugins/ToolIsolation.py:3740 #: appPlugins/ToolNCC.py:4487 appPlugins/ToolPaint.py:3276 msgid "Rest" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:263 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:289 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:246 appPlugins/ToolIsolation.py:3743 #: appPlugins/ToolNCC.py:4491 appPlugins/ToolPaint.py:3279 msgid "" "If checked, use 'rest machining'.\n" "Basically it will process copper outside PCB features,\n" "using the biggest tool and continue with the next tools,\n" "from bigger to smaller, to process the copper features that\n" "could not be processed by previous tool, until there is\n" "nothing left to process or there are no more tools.\n" "\n" "If not checked, use the standard algorithm." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275 appPlugins/ToolIsolation.py:3765 msgid "Combine" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277 appPlugins/ToolIsolation.py:3767 msgid "Combine all passes into one object" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:283 appPlugins/ToolIsolation.py:3784 msgid "Except" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:284 appPlugins/ToolIsolation.py:3785 msgid "" "When the isolation geometry is generated,\n" "by checking this, the area of the object below\n" "will be subtracted from the isolation geometry." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:290 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:349 appPlugins/ToolIsolation.py:3774 #: appPlugins/ToolNCC.py:4612 msgid "Check validity" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:292 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:351 appPlugins/ToolIsolation.py:3776 #: appPlugins/ToolNCC.py:4614 msgid "" "If checked then the tools diameters are verified\n" "if they will provide a complete isolation." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:301 appPlugins/ToolIsolation.py:3824 msgid "" "Isolation scope. Choose what to isolate:\n" "- 'All' -> Isolate all the polygons in the object\n" "- 'Area Selection' -> Isolate polygons within a selection area.\n" "- 'Polygon Selection' -> Isolate a selection of polygons.\n" "- 'Reference Object' - will process the area specified by another object." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:309 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279 appPlugins/ToolIsolation.py:3832 #: appPlugins/ToolPaint.py:3316 msgid "Polygon Selection" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:328 appPlugins/ToolIsolation.py:3860 msgid "Interiors" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:330 appPlugins/ToolIsolation.py:3862 msgid "" "When checked the user can select interiors of a polygon.\n" "(holes in the polygon)." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:335 appPlugins/ToolIsolation.py:3755 msgid "Forced Rest" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:337 appPlugins/ToolIsolation.py:3757 msgid "" "When checked the isolation will be done with the current tool even if\n" "interiors of a polygon (holes in the polygon) could not be isolated.\n" "Works when 'rest machining' is used." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:351 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:339 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:303 msgid "Progressive" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:354 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:342 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:307 msgid "" "- 'Normal' - normal plotting, done at the end of the job\n" "- 'Progressive' - each shape is plotted after it is generated" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:20 msgid "Levelling Plugin" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:42 appPlugins/ToolLevelling.py:1917 msgid "" "Choose a mode for height map generation.\n" "- Manual: will pick a selection of probe points by clicking on canvas\n" "- Grid: will automatically generate a grid of probe points" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:49 appPlugins/ToolLevelling.py:1924 #: appMain.py:8617 msgid "Grid" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:56 appPlugins/ToolLevelling.py:1931 msgid "" "Choose a method for approximation of heights from autolevelling data.\n" "- Voronoi: will generate a Voronoi diagram\n" "- Bilinear: will use bilinear interpolation. Usable only for grid mode." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:62 appPlugins/ToolLevelling.py:1937 msgid "Voronoi" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:63 appPlugins/ToolLevelling.py:1938 msgid "Bilinear" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:71 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:74 appPlugins/ToolLevelling.py:1951 #: appPlugins/ToolPanelize.py:1329 msgid "Columns" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:73 appPlugins/ToolLevelling.py:1953 msgid "The number of grid columns." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:81 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:86 appPlugins/ToolLevelling.py:1962 #: appPlugins/ToolPanelize.py:1340 msgid "Rows" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:83 appPlugins/ToolLevelling.py:1964 msgid "The number of grid rows." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:89 appPlugins/ToolLevelling.py:1874 msgid "Probe Z travel" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:91 appPlugins/ToolLevelling.py:1876 msgid "The safe Z for probe travelling between probe points." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:114 appPlugins/ToolLevelling.py:1899 msgid "Probe Feedrate" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:130 appPlugins/ToolLevelling.py:1975 msgid "Controller" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:132 appPlugins/ToolLevelling.py:1977 msgid "" "The kind of controller for which to generate\n" "height map gcode." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:142 appPlugins/ToolLevelling.py:2210 msgid "Step" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:144 appPlugins/ToolLevelling.py:2212 msgid "Each jog action will move the axes with this value." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:157 appPlugins/ToolLevelling.py:2226 msgid "Feedrate when jogging." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:170 msgid "Safe height (Z) distance when jogging to origin." msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:20 msgid "Markers Options" msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:42 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:96 appPlugins/ToolMarkers.py:1222 msgid "Shape of the marker." msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:46 appPlugins/ToolMarkers.py:1226 msgid "Semi-Cross" msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:56 appPlugins/ToolMarkers.py:1236 msgid "The thickness of the line that makes the corner marker." msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:70 appPlugins/ToolMarkers.py:1250 msgid "The length of the line that makes the corner marker." msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:83 appPlugins/ToolMarkers.py:1423 msgid "Drill Diameter" msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:100 appPlugins/ToolMarkers.py:1282 msgid "Edge" msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:108 appPlugins/ToolMarkers.py:1264 msgid "Offset locations from the set reference." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:21 msgid "Milling Plugin" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:30 appPlugins/ToolMilling.py:3955 msgid "Create CNCJob with toolpaths for milling either Geometry or drill holes." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:128 msgid "" "Height of the tool when\n" "moving without cutting." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:145 msgid "" "Include tool-change sequence\n" "in the Machine Code (Pause for tool change)." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:200 appPlugins/ToolMilling.py:4645 msgid "" "Cutting speed in the XY\n" "plane in units per minute" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:215 msgid "" "Cutting speed in the XY\n" "plane in units per minute.\n" "It is called also Plunge." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:232 msgid "" "Speed of the spindle in RPM (optional).\n" "If LASER preprocessor is used,\n" "this value is the power of laser." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:268 msgid "" "The Preprocessor file that dictates\n" "the Machine Code (like GCode, RML, HPGL) output." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:305 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:134 #: appPlugins/ToolCalibration.py:845 appPlugins/ToolDrilling.py:2803 #: appPlugins/ToolMilling.py:4834 msgid "Toolchange X-Y" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:328 msgid "" "Cutting speed in the XY plane\n" "(in units per minute).\n" "This is for the rapid move G00.\n" "It is useful only for Marlin,\n" "ignore for any other cases." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:344 appPlugins/ToolMilling.py:4700 msgid "Re-cut" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:346 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:358 appPlugins/ToolMilling.py:4702 #: appPlugins/ToolMilling.py:4715 msgid "" "In order to remove possible\n" "copper leftovers where first cut\n" "meet with last cut, we generate an\n" "extended cut over the first cut section." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:506 msgid "Add Polish" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:508 msgid "" "Will add a Paint section at the end of the GCode.\n" "A metallic brush will clean the material after milling." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:548 appPlugins/ToolMilling.py:4517 msgid "" "Algorithm for polishing:\n" "- Standard: Fixed step inwards.\n" "- Seed-based: Outwards from seed.\n" "- Line-based: Parallel lines." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:565 msgid "Excellon Milling" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:567 msgid "Will mill Excellon holes progressively from the center of the hole." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:580 appPlugins/ToolMilling.py:4318 msgid "" "Milling type:\n" "- Drills -> will mill the drills associated with this tool\n" "- Slots -> will mill the slots associated with this tool\n" "- Both -> will mill both drills and mills or whatever is available" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:600 appPlugins/ToolMilling.py:4338 msgid "The diameter of the tool who will do the milling" msgstr "" #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:21 msgid "NCC Plugin" msgstr "" #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:28 msgid "" "Create a Geometry object with\n" "toolpaths to cut all non-copper regions." msgstr "" #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:251 msgid "Offset value" msgstr "" #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:312 appPlugins/ToolNCC.py:4565 msgid "" "Selection of area to be processed.\n" "- 'Itself' - the processing extent is based on the object that is processed.\n" " - 'Area Selection' - left mouse click to start selection of the area to be processed.\n" "- 'Reference Object' - will process the area specified by another object." msgstr "" #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:21 msgid "Paint Plugin" msgstr "" #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:259 appPlugins/ToolPaint.py:3306 msgid "" "Selection of area to be processed.\n" "- 'Polygon Selection' - left mouse click to add/remove polygons to be processed.\n" "- 'Area Selection' - left mouse click to start selection of the area to be processed.\n" "Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple areas.\n" "- 'All Polygons' - the process will start after click.\n" "- 'Reference Object' - will process the area specified by another object." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:20 msgid "Panelize Plugin" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:29 msgid "" "Create an object that contains an array of (x, y) elements,\n" "each element is a copy of the source object spaced\n" "at a X distance, Y distance of each other." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:47 appPlugins/ToolPanelize.py:1304 msgid "Spacing cols" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:49 appPlugins/ToolPanelize.py:1306 msgid "" "Spacing between columns of the desired panel.\n" "In current units." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:61 appPlugins/ToolPanelize.py:1317 msgid "Spacing rows" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:63 appPlugins/ToolPanelize.py:1319 msgid "" "Spacing between rows of the desired panel.\n" "In current units." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:76 appPlugins/ToolPanelize.py:1331 msgid "Number of columns of the desired panel" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:88 appPlugins/ToolPanelize.py:1342 msgid "Number of rows of the desired panel" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:95 appPlugins/ToolPanelize.py:1362 msgid "Geo" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:96 appPlugins/ToolPanelize.py:1363 msgid "Panel Type" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:98 appPlugins/ToolPanelize.py:1365 msgid "" "Choose the type of object for the panel object:\n" "- Gerber\n" "- Geometry" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:109 appPlugins/ToolPanelize.py:1375 msgid "" "Active only for Geometry panel type.\n" "When checked the application will find\n" "any two overlapping Line elements in the panel\n" "and will remove the overlapping parts, keeping only one of them." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:117 msgid "Constrain within" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:119 appPlugins/ToolPanelize.py:1385 msgid "" "Area define by DX and DY within to constrain the panel.\n" "DX and DY values are in current units.\n" "Regardless of how many columns and rows are desired,\n" "the final panel will have as many columns and rows as\n" "they fit completely within selected area." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:132 appPlugins/ToolPanelize.py:1397 msgid "Width (DX)" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:134 appPlugins/ToolPanelize.py:1399 msgid "" "The width (DX) within which the panel must fit.\n" "In current units." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:145 appPlugins/ToolPanelize.py:1409 msgid "Height (DY)" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:147 appPlugins/ToolPanelize.py:1411 msgid "" "The height (DY)within which the panel must fit.\n" "In current units." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:21 msgid "SolderPaste Plugin" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:30 msgid "" "A tool to create GCode for dispensing\n" "solder paste onto a PCB." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:54 msgid "New Nozzle Dia" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:56 #: appPlugins/ToolSolderPaste.py:1286 msgid "Diameter for the new tool to add in the Tool Table" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:72 msgid "Z Dispense Start" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:74 #: appPlugins/ToolSolderPaste.py:1366 msgid "The height (Z) when solder paste dispensing starts." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:85 #: appPlugins/ToolSolderPaste.py:1477 msgid "Z Dispense" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:87 #: appPlugins/ToolSolderPaste.py:1379 msgid "The height (Z) when doing solder paste dispensing." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:98 msgid "Z Dispense Stop" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:100 #: appPlugins/ToolSolderPaste.py:1392 msgid "The height (Z) when solder paste dispensing stops." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:111 msgid "Z Travel" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:113 #: appPlugins/ToolSolderPaste.py:1340 msgid "" "The height (Z) for travel between pads\n" "(without dispensing solder paste)." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:125 msgid "Z Toolchange" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:127 #: appPlugins/ToolSolderPaste.py:1427 msgid "The height (Z) for tool (nozzle) change." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:136 #: appPlugins/ToolSolderPaste.py:1413 msgid "" "The X,Y location for tool (nozzle) change.\n" "The format is (x, y) where x and y are real numbers." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:150 #: appPlugins/ToolSolderPaste.py:1452 msgid "Feedrate (speed) while moving on the X-Y plane." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:163 #: appPlugins/ToolSolderPaste.py:1465 msgid "" "Feedrate (speed) while moving vertically\n" "(on Z plane)." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:175 msgid "Feedrate Z Dispense" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:177 #: appPlugins/ToolSolderPaste.py:1479 msgid "" "Feedrate (speed) while moving up vertically\n" "to Dispense position (on Z plane)." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:188 msgid "Spindle Speed FWD" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:190 #: appPlugins/ToolSolderPaste.py:1504 msgid "" "The dispenser speed while pushing solder paste\n" "through the dispenser nozzle." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:202 msgid "Dwell FWD" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:204 #: appPlugins/ToolSolderPaste.py:1518 msgid "Pause after solder dispensing." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:214 msgid "Spindle Speed REV" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:216 #: appPlugins/ToolSolderPaste.py:1541 msgid "" "The dispenser speed while retracting solder paste\n" "through the dispenser nozzle." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:228 msgid "Dwell REV" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:230 #: appPlugins/ToolSolderPaste.py:1555 msgid "" "Pause after solder paste dispenser retracted,\n" "to allow pressure equilibrium." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:239 #: appPlugins/ToolSolderPaste.py:1572 msgid "Files that control the GCode generation." msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:17 msgid "Substractor Plugin" msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:26 msgid "" "A tool to substract one Gerber or Geometry object\n" "from another of the same type." msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:37 appPlugins/ToolSub.py:951 msgid "Close paths" msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:38 appPlugins/ToolSub.py:952 msgid "Checking this will close the paths cut by the subtractor object." msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:41 appPlugins/ToolSub.py:831 msgid "Delete source" msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:43 appPlugins/ToolSub.py:833 msgid "" "When checked will delete the source objects\n" "after a successful operation." msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:21 msgid "Transform Plugin" msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:30 msgid "" "Various transformations that can be applied\n" "on a application object." msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:44 appPlugins/ToolTransform.py:616 msgid "" "The reference point for Rotate, Skew, Scale, Mirror.\n" "Can be:\n" "- Origin -> it is the 0, 0 point\n" "- Selection -> the center of the bounding box of the selected objects\n" "- Point -> a custom point defined by X,Y coordinates\n" "- Object -> the center of the bounding box of a specific object" msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70 appPlugins/ToolTransform.py:648 msgid "The type of object used as reference." msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:145 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:159 #: appPlugins/ToolCalibration.py:1225 appPlugins/ToolCalibration.py:1238 msgid "" "Angle, in degrees.\n" "Float number between -360 and 359." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:21 msgid "Autocompleter Keywords" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:25 #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:35 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:26 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:25 msgid "Restore" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:26 msgid "Restore the autocompleter keywords list to the default state." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:27 #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:37 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:28 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:27 appPlugins/ToolDrilling.py:3002 #: appPlugins/ToolMilling.py:5068 msgid "Delete All" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:28 msgid "Delete all autocompleter keywords from the list." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:36 msgid "Keywords list" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:38 msgid "" "List of keywords used by\n" "the autocompleter in FlatCAM.\n" "The autocompleter is installed\n" "in the Code Editor and for the Tcl Shell." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:59 #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:68 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:59 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:57 msgid "Extension" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:60 msgid "A keyword to be added or deleted to the list." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:68 msgid "Add keyword" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:69 msgid "Add a keyword to the list" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:70 msgid "Delete keyword" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:71 msgid "Delete a keyword from the list" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:21 msgid "Excellon File associations" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:36 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:27 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:26 msgid "Restore the extension list to the default state." msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:38 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:29 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:28 msgid "Delete all extensions from the list." msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:46 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:37 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:36 msgid "Extensions list" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:48 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:39 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:38 msgid "" "List of file extensions to be\n" "associated with FlatCAM." msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:69 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:60 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:58 msgid "A file extension to be added or deleted to the list." msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:77 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:68 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:66 msgid "Add Extension" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:78 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:69 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:67 msgid "Add a file extension to the list" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:79 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:70 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:68 msgid "Delete Extension" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:80 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:71 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:69 msgid "Delete a file extension from the list" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:87 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:78 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:76 msgid "Apply Association" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:88 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:79 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:77 msgid "" "Apply the file associations between\n" "FlatCAM and the files with above extensions.\n" "They will be active after next logon.\n" "This work only in Windows." msgstr "" #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:22 msgid "GCode File associations" msgstr "" #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:21 msgid "Gerber File associations" msgstr "" #: appObjects/AppObject.py:171 #, python-brace-format msgid "" "Object ({kind}) failed because: {error} \n" "\n" msgstr "" #: appObjects/AppObject.py:177 msgid "New object with name:" msgstr "" #: appObjects/AppObject.py:190 msgid "Converting units to " msgstr "" #: appObjects/AppObject.py:220 msgid "Gerber X2 drill file detected. Converted to Excellon object." msgstr "" #: appObjects/AppObject.py:264 appObjects/AppObject.py:270 appObjects/AppObject.py:276 #: appObjects/AppObject.py:282 appObjects/AppObject.py:288 appObjects/AppObject.py:294 msgid "created/selected" msgstr "" #: appObjects/AppObject.py:524 msgid "CREATE A NEW FLATCAM TCL SCRIPT" msgstr "" #: appObjects/AppObject.py:525 msgid "TCL Tutorial is here" msgstr "" #: appObjects/AppObject.py:527 msgid "FlatCAM commands list" msgstr "" #: appObjects/AppObject.py:528 msgid "" "Type >help< followed by Run Code for a list of FlatCAM Tcl Commands (displayed in Tcl " "Shell)." msgstr "" #: appObjects/FlatCAMCNCJob.py:710 appPlugins/ToolLevelling.py:1495 #: appPlugins/ToolLevelling.py:1687 appPlugins/ToolSolderPaste.py:1150 msgid "Export cancelled ..." msgstr "" #: appObjects/FlatCAMCNCJob.py:760 msgid "File saved to" msgstr "" #: appObjects/FlatCAMCNCJob.py:784 msgid "Code Review" msgstr "" #: appObjects/FlatCAMCNCJob.py:832 msgid "CNC Machine Code could not be updated" msgstr "" #: appObjects/FlatCAMCNCJob.py:836 msgid "CNC Machine Code was updated" msgstr "" #: appObjects/FlatCAMCNCJob.py:992 msgid "This CNCJob object can't be processed because it is a" msgstr "" #: appObjects/FlatCAMCNCJob.py:994 msgid "CNCJob object" msgstr "" #: appObjects/FlatCAMDocument.py:171 msgid "Document Editor" msgstr "" #: appObjects/FlatCAMExcellon.py:996 appObjects/FlatCAMExcellon.py:1101 #: appPlugins/ToolDrilling.py:1995 appPlugins/ToolMilling.py:2568 #: appPlugins/ToolMilling.py:2678 msgid "Please select one or more tools from the list and try again." msgstr "" #: appObjects/FlatCAMExcellon.py:1001 appPlugins/ToolMilling.py:2575 msgid "Milling tool for DRILLS is larger than hole size. Cancelled." msgstr "" #: appObjects/FlatCAMExcellon.py:1110 appPlugins/ToolMilling.py:2687 msgid "Milling tool for SLOTS is larger than hole size. Cancelled." msgstr "" #: appObjects/FlatCAMGeometry.py:504 msgid "Vertex points calculated." msgstr "" #: appObjects/FlatCAMGeometry.py:716 appObjects/FlatCAMGeometry.py:870 #: appPlugins/ToolMilling.py:3130 appPlugins/ToolMilling.py:3444 msgid "" "Tool Offset is selected in Tool Table but no value is provided.\n" "Add a Tool Offset or change the Offset Type." msgstr "" #: appObjects/FlatCAMGeometry.py:783 appObjects/FlatCAMGeometry.py:931 #: appPlugins/ToolMilling.py:3204 appPlugins/ToolMilling.py:3497 msgid "G-Code parsing in progress..." msgstr "" #: appObjects/FlatCAMGeometry.py:785 appObjects/FlatCAMGeometry.py:933 #: appPlugins/ToolMilling.py:3206 appPlugins/ToolMilling.py:3499 msgid "G-Code parsing finished..." msgstr "" #: appObjects/FlatCAMGeometry.py:792 appObjects/FlatCAMGeometry.py:942 #: appObjects/FlatCAMGeometry.py:1115 appPlugins/ToolMilling.py:3213 #: appPlugins/ToolMilling.py:3508 msgid "Finished G-Code processing" msgstr "" #: appObjects/FlatCAMGeometry.py:794 appObjects/FlatCAMGeometry.py:944 #: appPlugins/ToolMilling.py:3215 appPlugins/ToolMilling.py:3510 msgid "G-Code processing failed with error" msgstr "" #: appObjects/FlatCAMGeometry.py:837 appPlugins/ToolMilling.py:3258 #: appPlugins/ToolSolderPaste.py:946 msgid "Cancelled. Empty file, it has no geometry" msgstr "" #: appObjects/FlatCAMGeometry.py:960 appObjects/FlatCAMGeometry.py:965 #: appObjects/FlatCAMGeometry.py:1122 appPlugins/ToolMilling.py:3537 #: appPlugins/ToolMilling.py:3552 msgid "CNCjob created" msgstr "" #: appObjects/FlatCAMGeometry.py:1148 appObjects/FlatCAMGeometry.py:1157 #: appParsers/ParseGerber.py:2112 appParsers/ParseGerber.py:2122 msgid "Scale factor has to be a number: integer or float." msgstr "" #: appObjects/FlatCAMGeometry.py:1237 appParsers/ParseGerber.py:2241 msgid "" "An (x,y) pair of values are needed. Probable you entered only one value in the Offset " "field." msgstr "" #: appObjects/FlatCAMGeometry.py:1328 msgid "" "The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y)\n" "but now there is only one value, not two." msgstr "" #: appObjects/FlatCAMGerber.py:420 appPlugins/ToolIsolation.py:1602 msgid "Buffering solid geometry" msgstr "" #: appObjects/FlatCAMGerber.py:465 appObjects/FlatCAMGerber.py:514 msgid "Operation could not be done." msgstr "" #: appObjects/FlatCAMGerber.py:613 appObjects/FlatCAMGerber.py:688 #: appPlugins/ToolIsolation.py:1832 appPlugins/ToolIsolation.py:2223 #: appPlugins/ToolNCC.py:2079 appPlugins/ToolNCC.py:3099 appPlugins/ToolNCC.py:3480 msgid "Isolation geometry could not be generated." msgstr "" #: appObjects/FlatCAMGerber.py:640 appObjects/FlatCAMGerber.py:731 #: appPlugins/ToolIsolation.py:1926 appPlugins/ToolIsolation.py:2122 #: appPlugins/ToolIsolation.py:2330 msgid "Isolation geometry created" msgstr "" #: appObjects/FlatCAMObj.py:347 msgid "Name changed from" msgstr "" #: appObjects/FlatCAMObj.py:347 appObjects/ObjectCollection.py:537 msgid "to" msgstr "" #: appObjects/FlatCAMObj.py:358 tclCommands/TclCommandSetOrigin.py:113 msgid "Offsetting..." msgstr "" #: appObjects/FlatCAMObj.py:372 appObjects/FlatCAMObj.py:377 msgid "Scaling could not be executed." msgstr "" #: appObjects/FlatCAMObj.py:381 appObjects/FlatCAMObj.py:389 msgid "Scale done." msgstr "" #: appObjects/FlatCAMObj.py:387 msgid "Scaling..." msgstr "" #: appObjects/FlatCAMObj.py:405 msgid "Skewing..." msgstr "" #: appObjects/FlatCAMObj.py:544 appPlugins/ToolCalculators.py:694 #: appPlugins/ToolReport.py:181 msgid "Dimensions" msgstr "" #: appObjects/FlatCAMObj.py:552 appPlugins/ToolReport.py:190 msgid "Tools" msgstr "" #: appObjects/FlatCAMObj.py:567 msgid "Calculating dimensions ... Please wait." msgstr "" #: appObjects/FlatCAMObj.py:741 appObjects/FlatCAMObj.py:749 msgid "Polygons" msgstr "" #: appObjects/FlatCAMObj.py:743 msgid "LineStrings" msgstr "" #: appObjects/FlatCAMObj.py:748 msgid "Elements" msgstr "" #: appObjects/FlatCAMObj.py:786 appObjects/FlatCAMObj.py:857 appPlugins/ToolReport.py:448 #: appPlugins/ToolReport.py:522 msgid "Drills number" msgstr "" #: appObjects/FlatCAMObj.py:787 appObjects/FlatCAMObj.py:859 appPlugins/ToolReport.py:449 #: appPlugins/ToolReport.py:524 msgid "Slots number" msgstr "" #: appObjects/FlatCAMObj.py:789 appPlugins/ToolReport.py:451 msgid "Drills total number:" msgstr "" #: appObjects/FlatCAMObj.py:790 appPlugins/ToolReport.py:452 msgid "Slots total number:" msgstr "" #: appObjects/FlatCAMObj.py:818 appObjects/FlatCAMObj.py:821 appObjects/FlatCAMObj.py:824 #: appObjects/FlatCAMObj.py:854 appObjects/FlatCAMObj.py:861 appObjects/FlatCAMObj.py:864 #: appPlugins/ToolReport.py:483 appPlugins/ToolReport.py:486 appPlugins/ToolReport.py:489 #: appPlugins/ToolReport.py:519 appPlugins/ToolReport.py:526 appPlugins/ToolReport.py:529 msgid "Present" msgstr "" #: appObjects/FlatCAMObj.py:819 appObjects/FlatCAMObj.py:855 appPlugins/ToolReport.py:484 #: appPlugins/ToolReport.py:520 msgid "Solid Geometry" msgstr "" #: appObjects/FlatCAMObj.py:822 appObjects/FlatCAMObj.py:862 appPlugins/ToolReport.py:487 #: appPlugins/ToolReport.py:527 msgid "GCode Text" msgstr "" #: appObjects/FlatCAMObj.py:825 appObjects/FlatCAMObj.py:865 appPlugins/ToolReport.py:490 #: appPlugins/ToolReport.py:530 msgid "GCode Geometry" msgstr "" #: appObjects/FlatCAMObj.py:833 appObjects/FlatCAMObj.py:908 appPlugins/ToolReport.py:498 #: appPlugins/ToolReport.py:573 msgid "Tool Data" msgstr "" #: appObjects/FlatCAMObj.py:872 appPlugins/ToolReport.py:537 msgid "Depth of Cut" msgstr "" #: appObjects/FlatCAMObj.py:884 appPlugins/ToolReport.py:549 msgid "Clearance Height" msgstr "" #: appObjects/FlatCAMObj.py:922 appPlugins/ToolReport.py:587 msgid "Routing time" msgstr "" #: appObjects/FlatCAMObj.py:947 appPlugins/ToolReport.py:612 msgid "Width" msgstr "" #: appObjects/FlatCAMObj.py:953 appObjects/FlatCAMObj.py:961 appPlugins/ToolReport.py:618 #: appPlugins/ToolReport.py:626 msgid "Box Area" msgstr "" #: appObjects/FlatCAMObj.py:956 appObjects/FlatCAMObj.py:964 appPlugins/ToolReport.py:621 #: appPlugins/ToolReport.py:629 msgid "Convex_Hull Area" msgstr "" #: appObjects/FlatCAMObj.py:971 appObjects/FlatCAMObj.py:974 appPlugins/ToolReport.py:636 #: appPlugins/ToolReport.py:639 msgid "Copper Area" msgstr "" #: appObjects/FlatCAMScript.py:157 msgid "Script Editor" msgstr "" #: appObjects/ObjectCollection.py:245 msgid "Script" msgstr "" #: appObjects/ObjectCollection.py:425 msgid "Batch Save" msgstr "" #: appObjects/ObjectCollection.py:537 msgid "Object renamed from" msgstr "" #: appObjects/ObjectCollection.py:961 appObjects/ObjectCollection.py:967 #: appObjects/ObjectCollection.py:973 appObjects/ObjectCollection.py:979 #: appObjects/ObjectCollection.py:985 appObjects/ObjectCollection.py:991 appMain.py:7863 #: appMain.py:7869 appMain.py:7875 appMain.py:7881 msgid "selected" msgstr "" #: appObjects/ObjectCollection.py:1037 msgid "Cause of error" msgstr "" #: appObjects/ObjectCollection.py:1237 msgid "All objects are selected." msgstr "" #: appObjects/ObjectCollection.py:1247 msgid "Objects selection is cleared." msgstr "" #: appParsers/ParseExcellon.py:292 msgid "This is GCODE mark" msgstr "" #: appParsers/ParseExcellon.py:439 msgid "" "No tool diameter info's. See shell.\n" "A tool change event: T" msgstr "" #: appParsers/ParseExcellon.py:442 msgid "" "was found but the Excellon file have no informations regarding the tool diameters " "therefore the application will try to load it by using some 'fake' diameters.\n" "The user needs to edit the resulting Excellon object and change the diameters to reflect " "the real diameters." msgstr "" #: appParsers/ParseExcellon.py:979 msgid "" "Excellon Parser error.\n" "Parsing Failed. Line" msgstr "" #: appParsers/ParseFont.py:304 msgid "Font not supported, try another one." msgstr "" #: appParsers/ParseGerber.py:446 msgid "Gerber processing. Parsing" msgstr "" #: appParsers/ParseGerber.py:475 msgid "Gerber X2 format detected. Parsing may not be done correctly." msgstr "" #: appParsers/ParseGerber.py:479 msgid "Drill file Gerber X2 format detected. Parsing may not be done correctly." msgstr "" #: appParsers/ParseGerber.py:1171 appParsers/ParseGerber.py:1272 #: appParsers/ParseHPGL2.py:293 appParsers/ParseHPGL2.py:307 appParsers/ParseHPGL2.py:326 #: appParsers/ParseHPGL2.py:350 appParsers/ParseHPGL2.py:385 msgid "Coordinates missing, line ignored" msgstr "" #: appParsers/ParseGerber.py:1173 appParsers/ParseGerber.py:1274 msgid "GERBER file might be CORRUPT. Check the file !!!" msgstr "" #: appParsers/ParseGerber.py:1227 msgid "" "Region does not have enough points. File will be processed but there are parser errors. " "Line number" msgstr "" #: appParsers/ParseGerber.py:1664 appParsers/ParseHPGL2.py:420 msgid "Gerber processing. Joining polygons" msgstr "" #: appParsers/ParseGerber.py:1682 msgid "Gerber processing. Applying Gerber polarity." msgstr "" #: appParsers/ParseGerber.py:1740 msgid "Gerber Line" msgstr "" #: appParsers/ParseGerber.py:1740 msgid "Gerber Line Content" msgstr "" #: appParsers/ParseGerber.py:1741 msgid "Gerber Parser ERROR" msgstr "" #: appParsers/ParseGerber.py:2663 msgid "Gerber Buffer done." msgstr "" #: appParsers/ParseHPGL2.py:200 msgid "HPGL2 processing. Parsing" msgstr "" #: appParsers/ParseHPGL2.py:432 msgid "HPGL2 Line" msgstr "" #: appParsers/ParseHPGL2.py:432 msgid "HPGL2 Line Content" msgstr "" #: appParsers/ParseHPGL2.py:433 msgid "HPGL2 Parser ERROR" msgstr "" #: appPlugins/ToolAlignObjects.py:134 msgid "Align Tool" msgstr "" #: appPlugins/ToolAlignObjects.py:185 msgid "There is no aligned FlatCAM object selected..." msgstr "" #: appPlugins/ToolAlignObjects.py:195 msgid "There is no aligner FlatCAM object selected..." msgstr "" #: appPlugins/ToolAlignObjects.py:217 appPlugins/ToolAlignObjects.py:281 msgid "First Point" msgstr "" #: appPlugins/ToolAlignObjects.py:217 appPlugins/ToolAlignObjects.py:296 msgid "Click on the START point." msgstr "" #: appPlugins/ToolAlignObjects.py:276 appPlugins/ToolCalibration.py:311 #: appPlugins/ToolDblSided.py:494 appPlugins/ToolFiducials.py:752 #: appPlugins/ToolMarkers.py:1048 msgid "Cancelled by user request." msgstr "" #: appPlugins/ToolAlignObjects.py:281 appPlugins/ToolAlignObjects.py:303 #: appPlugins/ToolDistance.py:383 appPlugins/ToolMove.py:136 appPlugins/ToolQRCode.py:292 msgid "Click on the DESTINATION point ..." msgstr "" #: appPlugins/ToolAlignObjects.py:281 appPlugins/ToolAlignObjects.py:296 #: appPlugins/ToolAlignObjects.py:303 msgid "Or right click to cancel." msgstr "" #: appPlugins/ToolAlignObjects.py:296 appPlugins/ToolAlignObjects.py:303 #: appPlugins/ToolFiducials.py:922 msgid "Second Point" msgstr "" #: appPlugins/ToolAlignObjects.py:430 msgid "MOVING object" msgstr "" #: appPlugins/ToolAlignObjects.py:432 msgid "" "Specify the type of object to be aligned.\n" "It can be of type: Gerber or Excellon.\n" "The selection here decide the type of objects that will be\n" "in the Object combobox." msgstr "" #: appPlugins/ToolAlignObjects.py:461 msgid "Object to be aligned." msgstr "" #: appPlugins/ToolAlignObjects.py:469 msgid "DESTINATION object" msgstr "" #: appPlugins/ToolAlignObjects.py:471 msgid "" "Specify the type of object to be aligned to.\n" "It can be of type: Gerber or Excellon.\n" "The selection here decide the type of objects that will be\n" "in the Object combobox." msgstr "" #: appPlugins/ToolAlignObjects.py:500 msgid "Object to be aligned to. Aligner." msgstr "" #: appPlugins/ToolAlignObjects.py:519 msgid "Alignment Type" msgstr "" #: appPlugins/ToolAlignObjects.py:521 msgid "" "The type of alignment can be:\n" "- Single Point -> it require a single point of sync, the action will be a translation\n" "- Dual Point -> it require two points of sync, the action will be translation followed by " "rotation" msgstr "" #: appPlugins/ToolAlignObjects.py:527 msgid "Single Point" msgstr "" #: appPlugins/ToolAlignObjects.py:528 msgid "Dual Point" msgstr "" #: appPlugins/ToolAlignObjects.py:537 msgid "Align Object" msgstr "" #: appPlugins/ToolAlignObjects.py:540 msgid "" "Align the specified object to the aligner object.\n" "If only one point is used then it assumes translation.\n" "If tho points are used it assume translation and rotation." msgstr "" #: appPlugins/ToolAlignObjects.py:555 appPlugins/ToolCalculators.py:1053 #: appPlugins/ToolCalibration.py:1403 appPlugins/ToolCopperThieving.py:1792 #: appPlugins/ToolCutOut.py:2805 appPlugins/ToolDblSided.py:1160 #: appPlugins/ToolDrilling.py:3043 appPlugins/ToolEtchCompensation.py:513 #: appPlugins/ToolExtract.py:1415 appPlugins/ToolFiducials.py:1118 #: appPlugins/ToolFilm.py:1823 appPlugins/ToolFollow.py:787 #: appPlugins/ToolInvertGerber.py:320 appPlugins/ToolIsolation.py:3945 #: appPlugins/ToolLevelling.py:2354 appPlugins/ToolMarkers.py:1521 #: appPlugins/ToolMilling.py:5108 appPlugins/ToolNCC.py:4643 #: appPlugins/ToolObjectDistance.py:625 appPlugins/ToolOptimal.py:716 #: appPlugins/ToolPaint.py:3383 appPlugins/ToolPanelize.py:1448 #: appPlugins/ToolPunchGerber.py:2368 appPlugins/ToolQRCode.py:1030 #: appPlugins/ToolRulesCheck.py:1795 appPlugins/ToolSolderPaste.py:1692 #: appPlugins/ToolSub.py:977 appPlugins/ToolTransform.py:1027 msgid "Reset Tool" msgstr "" #: appPlugins/ToolAlignObjects.py:558 appPlugins/ToolCalculators.py:1056 #: appPlugins/ToolCalibration.py:1406 appPlugins/ToolCopperThieving.py:1795 #: appPlugins/ToolCutOut.py:2808 appPlugins/ToolDblSided.py:1163 #: appPlugins/ToolDrilling.py:3046 appPlugins/ToolEtchCompensation.py:516 #: appPlugins/ToolExtract.py:1418 appPlugins/ToolFiducials.py:1121 #: appPlugins/ToolFilm.py:1826 appPlugins/ToolFollow.py:790 #: appPlugins/ToolInvertGerber.py:323 appPlugins/ToolIsolation.py:3948 #: appPlugins/ToolLevelling.py:2357 appPlugins/ToolMarkers.py:1524 #: appPlugins/ToolMilling.py:5111 appPlugins/ToolNCC.py:4646 #: appPlugins/ToolObjectDistance.py:628 appPlugins/ToolOptimal.py:719 #: appPlugins/ToolPaint.py:3386 appPlugins/ToolPanelize.py:1451 #: appPlugins/ToolPunchGerber.py:2371 appPlugins/ToolQRCode.py:1033 #: appPlugins/ToolRulesCheck.py:1798 appPlugins/ToolSolderPaste.py:1695 #: appPlugins/ToolSub.py:980 appPlugins/ToolTransform.py:1030 msgid "Will reset the tool parameters." msgstr "" #: appPlugins/ToolCalculators.py:210 msgid "Cut width (tool diameter) calculated." msgstr "" #: appPlugins/ToolCalculators.py:232 msgid "Tool diameter (cut width) cannot be smaller than the tip diameter." msgstr "" #: appPlugins/ToolCalculators.py:238 msgid "Cut depth (Cut Z) calculated." msgstr "" #: appPlugins/ToolCalculators.py:510 msgid "V-Shape Tool" msgstr "" #: appPlugins/ToolCalculators.py:511 msgid "Units Conversion" msgstr "" #: appPlugins/ToolCalculators.py:512 msgid "ElectroPlating" msgstr "" #: appPlugins/ToolCalculators.py:513 msgid "Tinning" msgstr "" #: appPlugins/ToolCalculators.py:557 appPlugins/ToolCalculators.py:572 #: appPlugins/ToolCalculators.py:587 msgid "Here you enter the value to be converted from imperial to metric" msgstr "" #: appPlugins/ToolCalculators.py:560 appPlugins/ToolCalculators.py:575 #: appPlugins/ToolCalculators.py:590 msgid "Here you enter the value to be converted from metric to imperial" msgstr "" #: appPlugins/ToolCalculators.py:566 msgid "oz" msgstr "" #: appPlugins/ToolCalculators.py:567 msgid "gram" msgstr "" #: appPlugins/ToolCalculators.py:581 msgid "fl oz" msgstr "" #: appPlugins/ToolCalculators.py:582 appPlugins/ToolCalculators.py:955 #: appPlugins/ToolCalculators.py:975 appPlugins/ToolCalculators.py:1030 msgid "mL" msgstr "" #: appPlugins/ToolCalculators.py:628 msgid "" "This is the angle of the tip of the tool.\n" "It is specified by manufacturer." msgstr "" #: appPlugins/ToolCalculators.py:640 msgid "This is the depth to cut into the material." msgstr "" #: appPlugins/ToolCalculators.py:651 msgid "" "This is the actual tool diameter\n" "at the desired depth of cut." msgstr "" #: appPlugins/ToolCalculators.py:664 msgid "Calculate either the depth of cut or the effective tool diameter." msgstr "" #: appPlugins/ToolCalculators.py:689 msgid "Area Calculation" msgstr "" #: appPlugins/ToolCalculators.py:691 msgid "Determine the board area." msgstr "" #: appPlugins/ToolCalculators.py:703 msgid "Board Length." msgstr "" #: appPlugins/ToolCalculators.py:710 appPlugins/ToolCalculators.py:729 #: appPlugins/ToolCalculators.py:748 appPlugins/ToolCopperThieving.py:1744 msgid "cm" msgstr "" #: appPlugins/ToolCalculators.py:741 msgid "Board area." msgstr "" #: appPlugins/ToolCalculators.py:765 msgid "" "Current density applied to the board. \n" "In Amperes per Square Feet ASF." msgstr "" #: appPlugins/ToolCalculators.py:786 msgid "Thickness of the deposited copper." msgstr "" #: appPlugins/ToolCalculators.py:794 msgid "um" msgstr "" #: appPlugins/ToolCalculators.py:805 msgid "Current Value" msgstr "" #: appPlugins/ToolCalculators.py:806 msgid "" "This is the current intensity value\n" "to be set on the Power Supply." msgstr "" #: appPlugins/ToolCalculators.py:827 msgid "Time" msgstr "" #: appPlugins/ToolCalculators.py:828 msgid "The time calculated to deposit copper." msgstr "" #: appPlugins/ToolCalculators.py:851 msgid "Calculate the current intensity value and the procedure time." msgstr "" #: appPlugins/ToolCalculators.py:861 msgid "" "Calculator for chemical quantities\n" "required for tinning PCB's." msgstr "" #: appPlugins/ToolCalculators.py:873 msgid "Solution" msgstr "" #: appPlugins/ToolCalculators.py:875 msgid "Choose one solution for tinning." msgstr "" #: appPlugins/ToolCalculators.py:887 msgid "Stannous Chloride." msgstr "" #: appPlugins/ToolCalculators.py:895 appPlugins/ToolCalculators.py:915 #: appPlugins/ToolCalculators.py:935 appPlugins/ToolCalculators.py:1006 msgid "g" msgstr "" #: appPlugins/ToolCalculators.py:906 appPlugins/ToolCalculators.py:907 msgid "Thiourea" msgstr "" #: appPlugins/ToolCalculators.py:927 msgid "Sulfamic Acid." msgstr "" #: appPlugins/ToolCalculators.py:947 msgid "Distilled Water." msgstr "" #: appPlugins/ToolCalculators.py:966 msgid "Soap" msgstr "" #: appPlugins/ToolCalculators.py:967 msgid "Liquid soap." msgstr "" #: appPlugins/ToolCalculators.py:990 msgid "Optional" msgstr "" #: appPlugins/ToolCalculators.py:996 msgid "" "Sodium hypophosphite.\n" "Optional, for solution stability.\n" "Warning: List 1 chemical in USA." msgstr "" #: appPlugins/ToolCalculators.py:1022 msgid "Volume" msgstr "" #: appPlugins/ToolCalculators.py:1023 msgid "Desired volume of tinning solution." msgstr "" #: appPlugins/ToolCalculators.py:1044 msgid "Calculate the chemical quantities for the desired volume of tinning solution." msgstr "" #: appPlugins/ToolCalibration.py:126 appPlugins/ToolCalibration.py:765 msgid "Calibration" msgstr "" #: appPlugins/ToolCalibration.py:191 msgid "Tool initialized" msgstr "" #: appPlugins/ToolCalibration.py:229 msgid "There is no source FlatCAM object selected..." msgstr "" #: appPlugins/ToolCalibration.py:250 msgid "Get First calibration point. Bottom Left..." msgstr "" #: appPlugins/ToolCalibration.py:317 msgid "Get Second calibration point. Bottom Right (Top Left)..." msgstr "" #: appPlugins/ToolCalibration.py:321 msgid "Get Third calibration point. Top Left (Bottom Right)..." msgstr "" #: appPlugins/ToolCalibration.py:325 msgid "Get Forth calibration point. Top Right..." msgstr "" #: appPlugins/ToolCalibration.py:360 msgid "Verification GCode for FlatCAM Calibration Tool" msgstr "" #: appPlugins/ToolCalibration.py:372 appPlugins/ToolCalibration.py:458 msgid "Gcode Viewer" msgstr "" #: appPlugins/ToolCalibration.py:388 msgid "Cancelled. Four points are needed for GCode generation." msgstr "" #: appPlugins/ToolCalibration.py:638 appPlugins/ToolCalibration.py:729 #: appPlugins/ToolDblSided.py:512 appPlugins/ToolDblSided.py:600 #: appPlugins/ToolExtract.py:385 appPlugins/ToolExtract.py:700 appPlugins/ToolExtract.py:803 #: appPlugins/ToolFilm.py:318 appPlugins/ToolFilm.py:325 appPlugins/ToolFilm.py:329 #: appPlugins/ToolMilling.py:2067 appPlugins/ToolMove.py:202 #: appPlugins/ToolPunchGerber.py:511 appPlugins/ToolPunchGerber.py:515 #: appPlugins/ToolReport.py:140 appPlugins/ToolTransform.py:176 #: appPlugins/ToolTransform.py:327 appPlugins/ToolTransform.py:359 #: appPlugins/ToolTransform.py:404 appPlugins/ToolTransform.py:438 #: appPlugins/ToolTransform.py:473 appPlugins/ToolTransform.py:510 appMain.py:2583 #: appMain.py:5290 appMain.py:5771 appMain.py:6180 appMain.py:6264 appMain.py:6444 #: appMain.py:6753 appMain.py:6949 appMain.py:6995 appMain.py:7042 appMain.py:7097 #: appMain.py:7145 appMain.py:7303 appMain.py:9736 appMain.py:9833 appMain.py:9875 #: appMain.py:9917 appMain.py:9959 appMain.py:10000 appMain.py:10045 appMain.py:10090 #: appMain.py:10617 appMain.py:10621 camlib.py:2464 camlib.py:2537 camlib.py:2605 #: camlib.py:2680 msgid "No object is selected." msgstr "" #: appPlugins/ToolCalibration.py:789 msgid "Parameters used when creating the GCode in this tool." msgstr "" #: appPlugins/ToolCalibration.py:893 msgid "STEP 1: Acquire Calibration Points" msgstr "" #: appPlugins/ToolCalibration.py:895 msgid "" "Pick four points by clicking on canvas.\n" "Those four points should be in the four\n" "(as much as possible) corners of the object." msgstr "" #: appPlugins/ToolCalibration.py:913 appPlugins/ToolImage.py:338 #: appPlugins/ToolReport.py:205 msgid "Object Type" msgstr "" #: appPlugins/ToolCalibration.py:930 msgid "Source object selection" msgstr "" #: appPlugins/ToolCalibration.py:932 msgid "FlatCAM Object to be used as a source for reference points." msgstr "" #: appPlugins/ToolCalibration.py:938 msgid "Calibration Points" msgstr "" #: appPlugins/ToolCalibration.py:940 msgid "" "Contain the expected calibration points and the\n" "ones measured." msgstr "" #: appPlugins/ToolCalibration.py:956 msgid "Found Delta" msgstr "" #: appPlugins/ToolCalibration.py:968 msgid "Bot Left X" msgstr "" #: appPlugins/ToolCalibration.py:977 msgid "Bot Left Y" msgstr "" #: appPlugins/ToolCalibration.py:995 msgid "Bot Right X" msgstr "" #: appPlugins/ToolCalibration.py:1005 msgid "Bot Right Y" msgstr "" #: appPlugins/ToolCalibration.py:1020 msgid "Top Left X" msgstr "" #: appPlugins/ToolCalibration.py:1029 msgid "Top Left Y" msgstr "" #: appPlugins/ToolCalibration.py:1044 msgid "Top Right X" msgstr "" #: appPlugins/ToolCalibration.py:1054 msgid "Top Right Y" msgstr "" #: appPlugins/ToolCalibration.py:1087 msgid "Get Points" msgstr "" #: appPlugins/ToolCalibration.py:1089 msgid "" "Pick four points by clicking on canvas if the source choice\n" "is 'free' or inside the object geometry if the source is 'object'.\n" "Those four points should be in the four squares of\n" "the object." msgstr "" #: appPlugins/ToolCalibration.py:1110 msgid "STEP 2: Verification GCode" msgstr "" #: appPlugins/ToolCalibration.py:1112 appPlugins/ToolCalibration.py:1125 msgid "" "Generate GCode file to locate and align the PCB by using\n" "the four points acquired above.\n" "The points sequence is:\n" "- first point -> set the origin\n" "- second point -> alignment point. Can be: top-left or bottom-right.\n" "- third point -> check point. Can be: top-left or bottom-right.\n" "- forth point -> final verification point. Just for evaluation." msgstr "" #: appPlugins/ToolCalibration.py:1123 msgid "Generate GCode" msgstr "" #: appPlugins/ToolCalibration.py:1149 msgid "STEP 3: Adjustments" msgstr "" #: appPlugins/ToolCalibration.py:1151 appPlugins/ToolCalibration.py:1160 msgid "" "Calculate Scale and Skew factors based on the differences (delta)\n" "found when checking the PCB pattern. The differences must be filled\n" "in the fields Found (Delta)." msgstr "" #: appPlugins/ToolCalibration.py:1158 msgid "Calculate Factors" msgstr "" #: appPlugins/ToolCalibration.py:1180 msgid "STEP 4: Adjusted GCode" msgstr "" #: appPlugins/ToolCalibration.py:1182 msgid "" "Generate verification GCode file adjusted with\n" "the factors above." msgstr "" #: appPlugins/ToolCalibration.py:1187 msgid "Scale Factor X:" msgstr "" #: appPlugins/ToolCalibration.py:1189 msgid "Factor for Scale action over X axis." msgstr "" #: appPlugins/ToolCalibration.py:1199 msgid "Scale Factor Y:" msgstr "" #: appPlugins/ToolCalibration.py:1201 msgid "Factor for Scale action over Y axis." msgstr "" #: appPlugins/ToolCalibration.py:1211 msgid "Apply Scale Factors" msgstr "" #: appPlugins/ToolCalibration.py:1213 msgid "Apply Scale factors on the calibration points." msgstr "" #: appPlugins/ToolCalibration.py:1223 msgid "Skew Angle X:" msgstr "" #: appPlugins/ToolCalibration.py:1236 msgid "Skew Angle Y:" msgstr "" #: appPlugins/ToolCalibration.py:1249 msgid "Apply Skew Factors" msgstr "" #: appPlugins/ToolCalibration.py:1251 msgid "Apply Skew factors on the calibration points." msgstr "" #: appPlugins/ToolCalibration.py:1320 msgid "Generate Adjusted GCode" msgstr "" #: appPlugins/ToolCalibration.py:1322 msgid "" "Generate verification GCode file adjusted with\n" "the factors set above.\n" "The GCode parameters can be readjusted\n" "before clicking this button." msgstr "" #: appPlugins/ToolCalibration.py:1343 msgid "STEP 5: Calibrate FlatCAM Objects" msgstr "" #: appPlugins/ToolCalibration.py:1345 msgid "" "Adjust the FlatCAM objects\n" "with the factors determined and verified above." msgstr "" #: appPlugins/ToolCalibration.py:1357 msgid "Adjusted object type" msgstr "" #: appPlugins/ToolCalibration.py:1358 msgid "Type of the Application Object to be adjusted." msgstr "" #: appPlugins/ToolCalibration.py:1371 msgid "Adjusted object selection" msgstr "" #: appPlugins/ToolCalibration.py:1373 msgid "The Application Object to be adjusted." msgstr "" #: appPlugins/ToolCalibration.py:1380 msgid "Calibrate" msgstr "" #: appPlugins/ToolCalibration.py:1382 msgid "" "Adjust (scale and/or skew) the objects\n" "with the factors determined above." msgstr "" #: appPlugins/ToolCopperThieving.py:233 appPlugins/ToolCopperThieving.py:259 msgid "Lines Grid works only for 'itself' reference ..." msgstr "" #: appPlugins/ToolCopperThieving.py:244 msgid "Solid fill selected." msgstr "" #: appPlugins/ToolCopperThieving.py:249 msgid "Dots grid fill selected." msgstr "" #: appPlugins/ToolCopperThieving.py:254 msgid "Squares grid fill selected." msgstr "" #: appPlugins/ToolCopperThieving.py:277 appPlugins/ToolCopperThieving.py:375 #: appPlugins/ToolCopperThieving.py:989 appPlugins/ToolFiducials.py:292 #: appPlugins/ToolFiducials.py:594 appPlugins/ToolMarkers.py:322 #: appPlugins/ToolMarkers.py:357 appPlugins/ToolMarkers.py:417 appPlugins/ToolMarkers.py:752 #: appPlugins/ToolMarkers.py:861 appPlugins/ToolMarkers.py:973 appPlugins/ToolOptimal.py:223 #: appPlugins/ToolQRCode.py:244 msgid "There is no Gerber object loaded ..." msgstr "" #: appPlugins/ToolCopperThieving.py:290 appPlugins/ToolCopperThieving.py:889 msgid "Append geometry" msgstr "" #: appPlugins/ToolCopperThieving.py:345 appPlugins/ToolCopperThieving.py:940 #: appPlugins/ToolCopperThieving.py:1148 msgid "Append source file" msgstr "" #: appPlugins/ToolCopperThieving.py:358 appPlugins/ToolCopperThieving.py:953 msgid "Copper Thieving Tool done." msgstr "" #: appPlugins/ToolCopperThieving.py:385 appPlugins/ToolCopperThieving.py:405 #: appPlugins/ToolCutOut.py:660 appPlugins/ToolCutOut.py:1041 appPlugins/ToolCutOut.py:1429 #: appPlugins/ToolCutOut.py:1521 appPlugins/ToolCutOut.py:1565 appPlugins/ToolCutOut.py:1668 #: appPlugins/ToolDrilling.py:945 appPlugins/ToolDrilling.py:1960 #: appPlugins/ToolEtchCompensation.py:195 appPlugins/ToolFollow.py:210 #: appPlugins/ToolFollow.py:260 appPlugins/ToolInvertGerber.py:143 #: appPlugins/ToolIsolation.py:1177 appPlugins/ToolIsolation.py:1242 #: appPlugins/ToolIsolation.py:1610 appPlugins/ToolIsolation.py:1637 #: appPlugins/ToolIsolation.py:2564 appPlugins/ToolLevelling.py:345 #: appPlugins/ToolMilling.py:681 appPlugins/ToolMilling.py:898 #: appPlugins/ToolMilling.py:1385 appPlugins/ToolMilling.py:1729 #: appPlugins/ToolMilling.py:1813 appPlugins/ToolMilling.py:2751 #: appPlugins/ToolMilling.py:2774 appPlugins/ToolMilling.py:2939 appPlugins/ToolNCC.py:1018 #: appPlugins/ToolNCC.py:1087 appPlugins/ToolNCC.py:1532 appPlugins/ToolNCC.py:1582 #: appPlugins/ToolNCC.py:1617 appPlugins/ToolPaint.py:1154 appPlugins/ToolPaint.py:1243 #: appPlugins/ToolPanelize.py:320 appPlugins/ToolPanelize.py:334 appPlugins/ToolSub.py:286 #: appPlugins/ToolSub.py:304 appPlugins/ToolSub.py:518 appPlugins/ToolSub.py:531 #: tclCommands/TclCommandBuffer.py:87 tclCommands/TclCommandCopperClear.py:97 #: tclCommands/TclCommandCopperClear.py:252 tclCommands/TclCommandPaint.py:100 #: tclCommands/TclCommandPaint.py:273 tclCommands/TclCommandScale.py:110 #: tclCommands/TclCommandSkew.py:164 msgid "Could not retrieve object" msgstr "" #: appPlugins/ToolCopperThieving.py:433 msgid "Click the end point of the filling area." msgstr "" #: appPlugins/ToolCopperThieving.py:560 msgid "Copper Thieving Tool started. Reading parameters." msgstr "" #: appPlugins/ToolCopperThieving.py:586 msgid "Copper Thieving Tool. Preparing isolation polygons." msgstr "" #: appPlugins/ToolCopperThieving.py:632 msgid "Copper Thieving Tool. Preparing areas to fill with copper." msgstr "" #: appPlugins/ToolCopperThieving.py:676 msgid "Geometry not supported for" msgstr "" #: appPlugins/ToolCopperThieving.py:682 appPlugins/ToolNCC.py:1911 #: appPlugins/ToolNCC.py:1959 appPlugins/ToolNCC.py:2961 appPlugins/ToolPaint.py:2643 msgid "No object available." msgstr "" #: appPlugins/ToolCopperThieving.py:715 appPlugins/ToolNCC.py:1929 #: appPlugins/ToolNCC.py:1982 appPlugins/ToolNCC.py:2994 msgid "The reference object type is not supported." msgstr "" #: appPlugins/ToolCopperThieving.py:720 msgid "Copper Thieving Tool. Appending new geometry and buffering." msgstr "" #: appPlugins/ToolCopperThieving.py:756 msgid "Create geometry" msgstr "" #: appPlugins/ToolCopperThieving.py:964 appPlugins/ToolCopperThieving.py:968 msgid "P-Plating Mask" msgstr "" #: appPlugins/ToolCopperThieving.py:992 msgid "Append PP-M geometry" msgstr "" #: appPlugins/ToolCopperThieving.py:1168 msgid "Generating Pattern Plating Mask done." msgstr "" #: appPlugins/ToolCopperThieving.py:1211 msgid "Copper Thieving Tool exit." msgstr "" #: appPlugins/ToolCopperThieving.py:1297 appPlugins/ToolCopperThieving.py:1686 #: appPlugins/ToolCutOut.py:2276 appPlugins/ToolDblSided.py:737 #: appPlugins/ToolDrilling.py:2423 appPlugins/ToolEtchCompensation.py:330 #: appPlugins/ToolExtract.py:984 appPlugins/ToolFiducials.py:853 appPlugins/ToolFilm.py:1278 #: appPlugins/ToolFollow.py:714 appPlugins/ToolInvertGerber.py:236 #: appPlugins/ToolIsolation.py:3348 appPlugins/ToolLevelling.py:1781 #: appPlugins/ToolMarkers.py:1189 appPlugins/ToolMilling.py:3983 appPlugins/ToolNCC.py:4091 #: appPlugins/ToolOptimal.py:498 appPlugins/ToolPaint.py:2968 #: appPlugins/ToolPanelize.py:1179 appPlugins/ToolPunchGerber.py:2017 #: appPlugins/ToolQRCode.py:773 appPlugins/ToolSolderPaste.py:1231 msgid "Source Object" msgstr "" #: appPlugins/ToolCopperThieving.py:1298 msgid "Gerber Object to which will be added a copper thieving." msgstr "" #: appPlugins/ToolCopperThieving.py:1330 msgid "" "This set the distance between the copper thieving components\n" "(the polygon fill may be split in multiple polygons)\n" "and the copper traces in the Gerber file." msgstr "" #: appPlugins/ToolCopperThieving.py:1394 msgid "" "The type of FlatCAM object to be used as copper thieving reference.\n" "It can be Gerber, Excellon or Geometry." msgstr "" #: appPlugins/ToolCopperThieving.py:1594 msgid "Insert Copper thieving" msgstr "" #: appPlugins/ToolCopperThieving.py:1597 msgid "" "Will add a polygon (may be split in multiple parts)\n" "that will surround the actual Gerber traces at a certain distance." msgstr "" #: appPlugins/ToolCopperThieving.py:1660 msgid "Insert Robber Bar" msgstr "" #: appPlugins/ToolCopperThieving.py:1663 msgid "" "Will add a polygon with a defined thickness\n" "that will surround the actual Gerber object\n" "at a certain distance.\n" "Required when doing holes pattern plating." msgstr "" #: appPlugins/ToolCopperThieving.py:1688 msgid "" "Gerber Object with the soldermask.\n" "It will be used as a base for\n" "the pattern plating mask." msgstr "" #: appPlugins/ToolCopperThieving.py:1731 msgid "Plated area" msgstr "" #: appPlugins/ToolCopperThieving.py:1733 msgid "" "The area to be plated by pattern plating.\n" "Basically is made from the openings in the plating mask.\n" "\n" "<> - the calculated area is actually a bit larger\n" "due of the fact that the soldermask openings are by design\n" "a bit larger than the copper pads, and this area is\n" "calculated from the soldermask openings." msgstr "" #: appPlugins/ToolCopperThieving.py:1774 msgid "Generate pattern plating mask" msgstr "" #: appPlugins/ToolCopperThieving.py:1777 msgid "" "Will add to the soldermask gerber geometry\n" "the geometries of the copper thieving and/or\n" "the robber bar if those were generated." msgstr "" #: appPlugins/ToolCutOut.py:429 appPlugins/ToolCutOut.py:2615 msgid "Any" msgstr "" #: appPlugins/ToolCutOut.py:446 appPlugins/ToolIsolation.py:1025 #: appPlugins/ToolIsolation.py:1347 appPlugins/ToolIsolation.py:1462 #: appPlugins/ToolMilling.py:2089 appPlugins/ToolMilling.py:2202 appPlugins/ToolNCC.py:1202 #: appPlugins/ToolNCC.py:1327 appPlugins/ToolNCC.py:1399 appPlugins/ToolPaint.py:682 #: appPlugins/ToolPaint.py:849 appPlugins/ToolPaint.py:982 appPlugins/ToolSolderPaste.py:353 #: appPlugins/ToolSolderPaste.py:527 appMain.py:5135 msgid "Please enter a tool diameter with non-zero value, in Float format." msgstr "" #: appPlugins/ToolCutOut.py:459 appPlugins/ToolDrilling.py:1162 #: appPlugins/ToolIsolation.py:1365 appPlugins/ToolMilling.py:2101 msgid "Could not load Tools DB file." msgstr "" #: appPlugins/ToolCutOut.py:513 appPlugins/ToolIsolation.py:1417 #: appPlugins/ToolMilling.py:2155 appPlugins/ToolNCC.py:1276 appPlugins/ToolPaint.py:928 msgid "Tool not in Tools Database. Adding a default tool." msgstr "" #: appPlugins/ToolCutOut.py:520 appPlugins/ToolDrilling.py:1227 #: appPlugins/ToolIsolation.py:1423 appPlugins/ToolMilling.py:2163 #: appPlugins/ToolNCC.py:1283 appPlugins/ToolPaint.py:936 msgid "" "Cancelled.\n" "Multiple tools for one tool diameter found in Tools Database." msgstr "" #: appPlugins/ToolCutOut.py:539 msgid "Updated tool from Tools Database." msgstr "" #: appPlugins/ToolCutOut.py:565 msgid "Default tool added." msgstr "" #: appPlugins/ToolCutOut.py:579 appPlugins/ToolIsolation.py:2938 appPlugins/ToolNCC.py:3943 #: appPlugins/ToolPaint.py:2811 appMain.py:6764 appMain.py:6785 msgid "Selected tool can't be used here. Pick another." msgstr "" #: appPlugins/ToolCutOut.py:601 msgid "Tool updated from Tools Database." msgstr "" #: appPlugins/ToolCutOut.py:665 appPlugins/ToolCutOut.py:1434 msgid "" "There is no object selected for Cutout.\n" "Select one and try again." msgstr "" #: appPlugins/ToolCutOut.py:671 appPlugins/ToolCutOut.py:1051 appPlugins/ToolCutOut.py:1537 #: tclCommands/TclCommandGeoCutout.py:181 msgid "Tool Diameter is zero value. Change it to a positive real number." msgstr "" #: appPlugins/ToolCutOut.py:684 appPlugins/ToolCutOut.py:1065 msgid "Number of gaps value is missing. Add it and retry." msgstr "" #: appPlugins/ToolCutOut.py:689 appPlugins/ToolCutOut.py:1069 msgid "" "Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8.\n" "Fill in a correct value and retry." msgstr "" #: appPlugins/ToolCutOut.py:1014 appPlugins/ToolCutOut.py:1323 appPlugins/ToolCutOut.py:1889 msgid "Mouse bites failed." msgstr "" #: appPlugins/ToolCutOut.py:1024 tclCommands/TclCommandGeoCutout.py:294 msgid "Any-form Cutout operation finished." msgstr "" #: appPlugins/ToolCutOut.py:1045 appPlugins/ToolDrilling.py:1964 #: appPlugins/ToolEtchCompensation.py:201 appPlugins/ToolFollow.py:214 #: appPlugins/ToolFollow.py:264 appPlugins/ToolInvertGerber.py:149 #: appPlugins/ToolIsolation.py:1181 appPlugins/ToolIsolation.py:1246 #: appPlugins/ToolIsolation.py:1614 appPlugins/ToolIsolation.py:1641 #: appPlugins/ToolIsolation.py:2568 appPlugins/ToolMilling.py:2755 #: appPlugins/ToolMilling.py:2778 appPlugins/ToolMilling.py:2943 appPlugins/ToolNCC.py:1022 #: appPlugins/ToolNCC.py:1091 appPlugins/ToolNCC.py:1536 appPlugins/ToolPaint.py:1158 #: appPlugins/ToolPanelize.py:325 tclCommands/TclCommandBbox.py:71 #: tclCommands/TclCommandNregions.py:71 msgid "Object not found" msgstr "" #: appPlugins/ToolCutOut.py:1171 appPlugins/ToolCutOut.py:1245 msgid "Rectangular cutout with negative margin is not possible." msgstr "" #: appPlugins/ToolCutOut.py:1332 msgid "Rectangular CutOut operation finished." msgstr "" #: appPlugins/ToolCutOut.py:1447 appPlugins/ToolCutOut.py:1465 appPlugins/ToolCutOut.py:1479 msgid "Could not add drills." msgstr "" #: appPlugins/ToolCutOut.py:1526 appPlugins/ToolCutOut.py:1596 msgid "Geometry object for manual cutout not found" msgstr "" #: appPlugins/ToolCutOut.py:1529 msgid "Click on the selected geometry object perimeter to create a bridge gap ..." msgstr "" #: appPlugins/ToolCutOut.py:1635 msgid "No tool in the Geometry object." msgstr "" #: appPlugins/ToolCutOut.py:1656 msgid "Added manual Bridge Gap. Left click to add another or right click to finish." msgstr "" #: appPlugins/ToolCutOut.py:1673 msgid "" "There is no Gerber object selected for Cutout.\n" "Select one and try again." msgstr "" #: appPlugins/ToolCutOut.py:1679 msgid "" "The selected object has to be of Gerber type.\n" "Select a Gerber file and try again." msgstr "" #: appPlugins/ToolCutOut.py:1725 msgid "Geometry not supported" msgstr "" #: appPlugins/ToolCutOut.py:1802 msgid "Making manual bridge gap..." msgstr "" #: appPlugins/ToolCutOut.py:1894 msgid "Finished manual adding of gaps." msgstr "" #: appPlugins/ToolCutOut.py:2258 msgid "" "Create a Geometry object with toolpaths\n" "for cutting out the object from the surrounding material." msgstr "" #: appPlugins/ToolCutOut.py:2277 msgid "Object to be cutout" msgstr "" #: appPlugins/ToolCutOut.py:2313 msgid "" "Specify the type of object to be cutout.\n" "It can be of type: Gerber or Geometry.\n" "What is selected here will dictate the kind\n" "of objects that will populate the 'Object' combobox." msgstr "" #: appPlugins/ToolCutOut.py:2330 msgid "Cutout Tool" msgstr "" #: appPlugins/ToolCutOut.py:2359 appPlugins/ToolIsolation.py:221 #: appPlugins/ToolIsolation.py:3474 appPlugins/ToolMilling.py:4247 #: appPlugins/ToolNCC.py:4263 appPlugins/ToolPaint.py:3119 msgid "Search and Add" msgstr "" #: appPlugins/ToolCutOut.py:2362 appPlugins/ToolIsolation.py:3477 #: appPlugins/ToolMilling.py:4250 appPlugins/ToolNCC.py:4266 appPlugins/ToolPaint.py:3122 msgid "" "Add a new tool to the Tool Table\n" "with the diameter specified above.\n" "This is done by a background search\n" "in the Tools Database. If nothing is found\n" "in the Tools DB then a default tool is added." msgstr "" #: appPlugins/ToolCutOut.py:2371 appPlugins/ToolIsolation.py:226 #: appPlugins/ToolIsolation.py:3486 appPlugins/ToolMilling.py:425 #: appPlugins/ToolMilling.py:4259 appPlugins/ToolNCC.py:4275 appPlugins/ToolPaint.py:3131 msgid "Pick from DB" msgstr "" #: appPlugins/ToolCutOut.py:2374 appPlugins/ToolIsolation.py:3489 #: appPlugins/ToolMilling.py:4262 appPlugins/ToolNCC.py:4278 appPlugins/ToolPaint.py:3134 msgid "" "Add a new tool to the Tool Table\n" "from the Tools Database.\n" "Tools database administration in in:\n" "Menu: Options -> Tools Database" msgstr "" #: appPlugins/ToolCutOut.py:2567 msgid "Selection of the type of cutout." msgstr "" #: appPlugins/ToolCutOut.py:2571 appPlugins/ToolPunchGerber.py:2326 msgid "Automatic" msgstr "" #: appPlugins/ToolCutOut.py:2612 msgid "" "Checked: the cutout shape is rectangular.\n" "Unchecked: any-form cutout shape." msgstr "" #: appPlugins/ToolCutOut.py:2652 msgid "Manual cutout Geometry" msgstr "" #: appPlugins/ToolCutOut.py:2654 appPlugins/ToolCutOut.py:2732 msgid "Geometry object used to create the manual cutout." msgstr "" #: appPlugins/ToolCutOut.py:2669 msgid "Manual Geometry" msgstr "" #: appPlugins/ToolCutOut.py:2672 msgid "Generate a Geometry to be used as cutout." msgstr "" #: appPlugins/ToolCutOut.py:2687 msgid "" "Add new gaps on the selected Geometry object\n" "by clicking mouse left button on the Geometry outline." msgstr "" #: appPlugins/ToolCutOut.py:2697 msgid "Generate the cutout geometry." msgstr "" #: appPlugins/ToolDblSided.py:306 msgid "'Point' reference is selected and 'Point' coordinates are missing." msgstr "" #: appPlugins/ToolDblSided.py:315 msgid "Box reference object is missing." msgstr "" #: appPlugins/ToolDblSided.py:323 msgid "Not supported." msgstr "" #: appPlugins/ToolDblSided.py:329 msgid "Drill diameter is missing." msgstr "" #: appPlugins/ToolDblSided.py:336 msgid "Alignment drill coordinates are missing." msgstr "" #: appPlugins/ToolDblSided.py:371 msgid "Alignment Drills" msgstr "" #: appPlugins/ToolDblSided.py:375 msgid "Excellon object with alignment drills created..." msgstr "" #: appPlugins/ToolDblSided.py:386 appPlugins/ToolPunchGerber.py:542 #: appPlugins/ToolPunchGerber.py:580 appPlugins/ToolPunchGerber.py:685 msgid "There is no Excellon object loaded ..." msgstr "" #: appPlugins/ToolDblSided.py:402 msgid "Click on canvas within the desired Excellon drill hole" msgstr "" #: appPlugins/ToolDblSided.py:446 msgid "Mirror reference point set." msgstr "" #: appPlugins/ToolDblSided.py:516 msgid "Only Gerber, Excellon and Geometry objects can be mirrored." msgstr "" #: appPlugins/ToolDblSided.py:528 msgid "There is no Box object loaded ..." msgstr "" #: appPlugins/ToolDblSided.py:538 msgid "There are no Point coordinates in the Point field. Add coords and try again ..." msgstr "" #: appPlugins/ToolDblSided.py:545 camlib.py:2462 msgid "Object was mirrored" msgstr "" #: appPlugins/ToolDblSided.py:715 appPlugins/ToolNCC.py:4069 msgid "" "Create a Geometry object with\n" "toolpaths to cover the space outside the copper pattern." msgstr "" #: appPlugins/ToolDblSided.py:738 msgid "Objects to be mirrored" msgstr "" #: appPlugins/ToolDblSided.py:751 msgid "Select the type of application object to be processed in this tool." msgstr "" #: appPlugins/ToolDblSided.py:770 msgid "Bounds Values" msgstr "" #: appPlugins/ToolDblSided.py:772 msgid "" "Select on canvas the object(s)\n" "for which to calculate bounds values." msgstr "" #: appPlugins/ToolDblSided.py:788 msgid "X min" msgstr "" #: appPlugins/ToolDblSided.py:790 appPlugins/ToolDblSided.py:804 msgid "Minimum location." msgstr "" #: appPlugins/ToolDblSided.py:802 msgid "Y min" msgstr "" #: appPlugins/ToolDblSided.py:816 msgid "X max" msgstr "" #: appPlugins/ToolDblSided.py:818 appPlugins/ToolDblSided.py:832 msgid "Maximum location." msgstr "" #: appPlugins/ToolDblSided.py:830 msgid "Y max" msgstr "" #: appPlugins/ToolDblSided.py:841 msgid "Center point coordinates" msgstr "" #: appPlugins/ToolDblSided.py:843 msgid "Centroid" msgstr "" #: appPlugins/ToolDblSided.py:845 msgid "" "The center point location for the rectangular\n" "bounding shape. Centroid. Format is (x, y)." msgstr "" #: appPlugins/ToolDblSided.py:854 msgid "Calculate Bounds Values" msgstr "" #: appPlugins/ToolDblSided.py:856 msgid "" "Calculate the enveloping rectangular shape coordinates,\n" "for the selection of objects.\n" "The envelope shape is parallel with the X, Y axis." msgstr "" #: appPlugins/ToolDblSided.py:872 msgid "Parameters for the mirror operation" msgstr "" #: appPlugins/ToolDblSided.py:935 msgid "Point coordinates" msgstr "" #: appPlugins/ToolDblSided.py:947 msgid "" "Add the coordinates in format (x, y) through which the mirroring axis\n" " selected in 'MIRROR AXIS' pass.\n" "The (x, y) coordinates are captured by pressing SHIFT key\n" "and left mouse button click on canvas or you can enter the coordinates manually." msgstr "" #: appPlugins/ToolDblSided.py:972 msgid "" "It can be of type: Gerber or Excellon or Geometry.\n" "The coordinates of the center of the bounding box are used\n" "as reference for mirror operation." msgstr "" #: appPlugins/ToolDblSided.py:999 msgid "Object that holds holes that can be picked as reference for mirroring." msgstr "" #: appPlugins/ToolDblSided.py:1011 msgid "Pick hole" msgstr "" #: appPlugins/ToolDblSided.py:1013 msgid "" "Click inside a drill hole that belong to the selected Excellon object,\n" "and the hole center coordinates will be copied to the Point field." msgstr "" #: appPlugins/ToolDblSided.py:1025 msgid "" "Mirrors (flips) the specified object around \n" "the specified axis. Does not create a new \n" "object, but modifies it." msgstr "" #: appPlugins/ToolDblSided.py:1043 appPlugins/ToolDblSided.py:1145 msgid "" "Creates an Excellon Object containing the\n" "specified alignment holes and their mirror\n" "images." msgstr "" #: appPlugins/ToolDblSided.py:1094 appPlugins/ToolDblSided.py:1101 msgid "" "The reference point used to create the second alignment drill\n" "from the first alignment drill, by doing mirror.\n" "It can be modified in the Mirror Parameters -> Reference section" msgstr "" #: appPlugins/ToolDblSided.py:1111 msgid "Drill Coordinates" msgstr "" #: appPlugins/ToolDblSided.py:1113 msgid "" "Alignment holes (x1, y1), (x2, y2), ... \n" "If the type is X or Y then for each pair of coordinates\n" "two drill points will be added: one with the given coordinates,\n" "and the other will be mirrored as set in the 'Mirror' section.\n" "If the type is 'Manual' then no mirror point is generated.\n" "\n" "Shift + mouse click will add one set of coordinates.\n" "Ctrl + Shift + mouse click will accumulate sets of coordinates. " msgstr "" #: appPlugins/ToolDblSided.py:1126 msgid "Drill coordinates" msgstr "" #: appPlugins/ToolDblSided.py:1131 msgid "Delete the last coordinates tuple in the list." msgstr "" #: appPlugins/ToolDblSided.py:1142 appPlugins/ToolMarkers.py:1434 #: appPlugins/ToolMarkers.py:1454 msgid "Create Excellon Object" msgstr "" #: appPlugins/ToolDistance.py:214 msgid "MEASURING: Click on the Start point ..." msgstr "" #: appPlugins/ToolDistance.py:304 appPlugins/ToolDistance.py:835 #: appPlugins/ToolObjectDistance.py:613 msgid "Measure" msgstr "" #: appPlugins/ToolDistance.py:428 msgid "Click to add next point or right click to finish." msgstr "" #: appPlugins/ToolDistance.py:475 msgid "Pads overlapped. Aborting." msgstr "" #: appPlugins/ToolDistance.py:708 msgid "Snap to center" msgstr "" #: appPlugins/ToolDistance.py:710 msgid "" "Mouse cursor will snap to the center of the pad/drill\n" "when it is hovering over the geometry of the pad/drill." msgstr "" #: appPlugins/ToolDistance.py:715 msgid "Multi-Point" msgstr "" #: appPlugins/ToolDistance.py:717 msgid "Make a measurement over multiple distance segments." msgstr "" #: appPlugins/ToolDistance.py:739 appPlugins/ToolObjectDistance.py:504 msgid "Start point" msgstr "" #: appPlugins/ToolDistance.py:740 appPlugins/ToolDistance.py:745 #: appPlugins/ToolObjectDistance.py:505 appPlugins/ToolObjectDistance.py:510 msgid "This is measuring Start point coordinates." msgstr "" #: appPlugins/ToolDistance.py:752 appPlugins/ToolObjectDistance.py:517 msgid "End point" msgstr "" #: appPlugins/ToolDistance.py:753 appPlugins/ToolDistance.py:758 #: appPlugins/ToolObjectDistance.py:518 appPlugins/ToolObjectDistance.py:523 msgid "This is the measuring Stop point coordinates." msgstr "" #: appPlugins/ToolDistance.py:767 appPlugins/ToolObjectDistance.py:532 msgid "Results" msgstr "" #: appPlugins/ToolDistance.py:777 appPlugins/ToolObjectDistance.py:542 msgid "Dx" msgstr "" #: appPlugins/ToolDistance.py:778 appPlugins/ToolDistance.py:783 #: appPlugins/ToolObjectDistance.py:543 appPlugins/ToolObjectDistance.py:548 msgid "This is the distance measured over the X axis." msgstr "" #: appPlugins/ToolDistance.py:790 appPlugins/ToolObjectDistance.py:555 msgid "Dy" msgstr "" #: appPlugins/ToolDistance.py:791 appPlugins/ToolDistance.py:796 #: appPlugins/ToolObjectDistance.py:556 appPlugins/ToolObjectDistance.py:561 msgid "This is the distance measured over the Y axis." msgstr "" #: appPlugins/ToolDistance.py:804 appPlugins/ToolDistance.py:809 #: appPlugins/ToolObjectDistance.py:569 appPlugins/ToolObjectDistance.py:574 msgid "This is orientation angle of the measuring line." msgstr "" #: appPlugins/ToolDistance.py:821 appPlugins/ToolObjectDistance.py:586 msgid "DISTANCE" msgstr "" #: appPlugins/ToolDistance.py:822 appPlugins/ToolDistance.py:828 #: appPlugins/ToolObjectDistance.py:587 appPlugins/ToolObjectDistance.py:593 msgid "This is the point to point Euclidian distance." msgstr "" #: appPlugins/ToolDrilling.py:309 appPlugins/ToolMilling.py:439 msgid "coords" msgstr "" #: appPlugins/ToolDrilling.py:924 appPlugins/ToolDrilling.py:930 #: appPlugins/ToolDrilling.py:975 appPlugins/ToolDrilling.py:1255 #: appPlugins/ToolDrilling.py:1262 appPlugins/ToolDrilling.py:1294 #: appPlugins/ToolDrilling.py:1307 appPlugins/ToolDrilling.py:1311 #: appPlugins/ToolDrilling.py:2513 appPlugins/ToolIsolation.py:664 #: appPlugins/ToolIsolation.py:858 appPlugins/ToolIsolation.py:863 #: appPlugins/ToolIsolation.py:893 appPlugins/ToolIsolation.py:918 #: appPlugins/ToolIsolation.py:931 appPlugins/ToolIsolation.py:3512 #: appPlugins/ToolMilling.py:994 appPlugins/ToolMilling.py:1113 #: appPlugins/ToolMilling.py:1675 appPlugins/ToolMilling.py:1683 #: appPlugins/ToolMilling.py:1687 appPlugins/ToolMilling.py:1744 #: appPlugins/ToolMilling.py:1756 appPlugins/ToolMilling.py:1760 #: appPlugins/ToolMilling.py:4287 appPlugins/ToolNCC.py:554 appPlugins/ToolNCC.py:559 #: appPlugins/ToolNCC.py:589 appPlugins/ToolNCC.py:612 appPlugins/ToolNCC.py:625 #: appPlugins/ToolNCC.py:840 appPlugins/ToolNCC.py:4300 appPlugins/ToolPaint.py:514 #: appPlugins/ToolPaint.py:519 appPlugins/ToolPaint.py:568 appPlugins/ToolPaint.py:590 #: appPlugins/ToolPaint.py:602 appPlugins/ToolPaint.py:818 appPlugins/ToolPaint.py:3156 msgid "Parameters for" msgstr "" #: appPlugins/ToolDrilling.py:924 appPlugins/ToolDrilling.py:1262 #: appPlugins/ToolDrilling.py:1311 appPlugins/ToolIsolation.py:664 #: appPlugins/ToolIsolation.py:863 appPlugins/ToolIsolation.py:931 #: appPlugins/ToolMilling.py:994 appPlugins/ToolMilling.py:1113 #: appPlugins/ToolMilling.py:1687 appPlugins/ToolMilling.py:1760 appPlugins/ToolNCC.py:559 #: appPlugins/ToolNCC.py:625 appPlugins/ToolNCC.py:840 appPlugins/ToolPaint.py:519 #: appPlugins/ToolPaint.py:602 appPlugins/ToolPaint.py:818 msgid "Multiple Tools" msgstr "" #: appPlugins/ToolDrilling.py:975 appPlugins/ToolDrilling.py:1255 #: appPlugins/ToolDrilling.py:1294 appPlugins/ToolIsolation.py:858 #: appPlugins/ToolIsolation.py:893 appPlugins/ToolMilling.py:1675 #: appPlugins/ToolMilling.py:1744 appPlugins/ToolNCC.py:554 appPlugins/ToolNCC.py:589 #: appPlugins/ToolPaint.py:514 appPlugins/ToolPaint.py:568 appMain.py:2622 msgid "No Tool Selected" msgstr "" #: appPlugins/ToolDrilling.py:1473 appPlugins/ToolIsolation.py:999 #: appPlugins/ToolMilling.py:2056 appPlugins/ToolNCC.py:732 appPlugins/ToolPaint.py:667 msgid "Current Tool parameters were applied to all tools." msgstr "" #: appPlugins/ToolDrilling.py:1535 appPlugins/ToolMilling.py:3588 msgid "Focus Z" msgstr "" #: appPlugins/ToolDrilling.py:1557 appPlugins/ToolMilling.py:3610 msgid "Laser Power" msgstr "" #: appPlugins/ToolDrilling.py:1559 appPlugins/ToolMilling.py:3612 msgid "The laser power when the laser is cutting." msgstr "" #: appPlugins/ToolDrilling.py:1678 appPlugins/ToolMilling.py:3775 msgid "Delete failed. There are no exclusion areas to delete." msgstr "" #: appPlugins/ToolDrilling.py:1695 appPlugins/ToolMilling.py:3792 msgid "Delete failed. Nothing is selected." msgstr "" #: appPlugins/ToolDrilling.py:1712 appPlugins/ToolMilling.py:3809 msgid "Only one selected row is allowed." msgstr "" #: appPlugins/ToolDrilling.py:1813 appPlugins/ToolDrilling.py:1828 #: appPlugins/ToolMilling.py:3910 appPlugins/ToolMilling.py:3925 msgid "Value edited in Exclusion Table." msgstr "" #: appPlugins/ToolDrilling.py:1982 camlib.py:4281 msgid "The loaded Excellon file has no drills" msgstr "" #: appPlugins/ToolDrilling.py:2028 camlib.py:4201 msgid "Creating a list of points to drill..." msgstr "" #: appPlugins/ToolDrilling.py:2035 msgid "Drill points inside the exclusion zones." msgstr "" #: appPlugins/ToolDrilling.py:2051 camlib.py:4271 camlib.py:5719 camlib.py:6158 msgid "Starting G-Code" msgstr "" #: appPlugins/ToolDrilling.py:2056 msgid "Generating CNCJob..." msgstr "" #: appPlugins/ToolDrilling.py:2205 camlib.py:3361 camlib.py:3844 camlib.py:6015 msgid "The Toolchange X,Y format has to be (x, y)." msgstr "" #: appPlugins/ToolDrilling.py:2356 msgid "Generating CNC Code" msgstr "" #: appPlugins/ToolDrilling.py:2425 appPlugins/ToolFilm.py:1280 msgid "Excellon object for drilling/milling operation." msgstr "" #: appPlugins/ToolDrilling.py:2453 msgid "Tools in the object used for drilling." msgstr "" #: appPlugins/ToolDrilling.py:2500 msgid "Search DB" msgstr "" #: appPlugins/ToolDrilling.py:2503 msgid "" "Will search and try to replace the tools from Tools Table\n" "with tools from DB that have a close diameter value." msgstr "" #: appPlugins/ToolDrilling.py:2516 appPlugins/ToolIsolation.py:3515 #: appPlugins/ToolMilling.py:4290 appPlugins/ToolNCC.py:4302 appPlugins/ToolPaint.py:3159 msgid "" "The data used for creating GCode.\n" "Each tool store it's own set of such data." msgstr "" #: appPlugins/ToolDrilling.py:2755 appPlugins/ToolIsolation.py:3715 #: appPlugins/ToolMilling.py:4787 appPlugins/ToolNCC.py:4462 appPlugins/ToolPaint.py:3253 msgid "Apply parameters to all tools" msgstr "" #: appPlugins/ToolDrilling.py:2758 appPlugins/ToolIsolation.py:3718 #: appPlugins/ToolMilling.py:4790 appPlugins/ToolNCC.py:4465 appPlugins/ToolPaint.py:3256 msgid "" "The parameters in the current form will be applied\n" "on all the tools from the Tool Table." msgstr "" #: appPlugins/ToolDrilling.py:2780 appPlugins/ToolMilling.py:4812 msgid "Tool change Z" msgstr "" #: appPlugins/ToolDrilling.py:2856 appPlugins/ToolMilling.py:4875 msgid "X,Y coordinates" msgstr "" #: appPlugins/ToolDrilling.py:2902 msgid "" "The preprocessor JSON file that dictates\n" "Gcode output for Excellon Objects." msgstr "" #: appPlugins/ToolDrilling.py:2917 appPlugins/ToolMilling.py:4982 msgid "Add exclusion areas" msgstr "" #: appPlugins/ToolDrilling.py:2944 appPlugins/ToolMilling.py:5010 msgid "This is the Area ID." msgstr "" #: appPlugins/ToolDrilling.py:2946 appPlugins/ToolMilling.py:5012 msgid "Type of the object where the exclusion area was added." msgstr "" #: appPlugins/ToolDrilling.py:2948 appPlugins/ToolMilling.py:5014 msgid "The strategy used for exclusion area. Go around the exclusion areas or over it." msgstr "" #: appPlugins/ToolDrilling.py:2950 appPlugins/ToolMilling.py:5016 msgid "" "If the strategy is to go over the area then this is the height at which the tool will go " "to avoid the exclusion area." msgstr "" #: appPlugins/ToolDrilling.py:2984 appPlugins/ToolMilling.py:5050 msgid "Add Area:" msgstr "" #: appPlugins/ToolDrilling.py:2985 appPlugins/ToolMilling.py:5051 msgid "Add an Exclusion Area." msgstr "" #: appPlugins/ToolDrilling.py:3003 appPlugins/ToolMilling.py:5069 msgid "Delete all exclusion areas." msgstr "" #: appPlugins/ToolDrilling.py:3006 appPlugins/ToolMilling.py:5072 msgid "Delete Selected" msgstr "" #: appPlugins/ToolDrilling.py:3007 appPlugins/ToolMilling.py:5073 msgid "Delete all exclusion areas that are selected in the table." msgstr "" #: appPlugins/ToolDrilling.py:3023 appPlugins/ToolMilling.py:5088 msgid "Generate CNCJob object" msgstr "" #: appPlugins/ToolDrilling.py:3026 appPlugins/ToolMilling.py:5091 msgid "" "Generate the CNC Job.\n" "If milling then an additional Geometry object will be created.\n" "Add / Select at least one tool in the tool-table.\n" "Click the # header to select all, or Ctrl + LMB\n" "for custom selection of tools." msgstr "" #: appPlugins/ToolEtchCompensation.py:104 appPlugins/ToolEtchCompensation.py:302 msgid "Etch Compensation" msgstr "" #: appPlugins/ToolEtchCompensation.py:207 appPlugins/ToolEtchCompensation.py:221 msgid "Missing parameter value." msgstr "" #: appPlugins/ToolEtchCompensation.py:332 msgid "Gerber object that will be compensated." msgstr "" #: appPlugins/ToolEtchCompensation.py:349 msgid "Conversion utilities" msgstr "" #: appPlugins/ToolEtchCompensation.py:360 msgid "Oz to Microns" msgstr "" #: appPlugins/ToolEtchCompensation.py:362 msgid "" "Will convert from oz thickness to microns [um].\n" "Can use formulas with operators: /, *, +, -, %, .\n" "The real numbers use the dot decimals separator." msgstr "" #: appPlugins/ToolEtchCompensation.py:371 msgid "Oz value" msgstr "" #: appPlugins/ToolEtchCompensation.py:373 appPlugins/ToolEtchCompensation.py:395 msgid "Microns value" msgstr "" #: appPlugins/ToolEtchCompensation.py:382 msgid "Mils to Microns" msgstr "" #: appPlugins/ToolEtchCompensation.py:384 msgid "" "Will convert from mils to microns [um].\n" "Can use formulas with operators: /, *, +, -, %, .\n" "The real numbers use the dot decimals separator." msgstr "" #: appPlugins/ToolEtchCompensation.py:393 msgid "Mils value" msgstr "" #: appPlugins/ToolEtchCompensation.py:417 msgid "Copper Thickness" msgstr "" #: appPlugins/ToolEtchCompensation.py:419 msgid "" "The thickness of the copper foil.\n" "In microns [um]." msgstr "" #: appPlugins/ToolEtchCompensation.py:429 msgid "Ratio" msgstr "" #: appPlugins/ToolEtchCompensation.py:431 msgid "" "The ratio of lateral etch versus depth etch.\n" "Can be:\n" "- custom -> the user will enter a custom value\n" "- preselection -> value which depends on a selection of etchants" msgstr "" #: appPlugins/ToolEtchCompensation.py:437 appPlugins/ToolEtchCompensation.py:462 msgid "Etch Factor" msgstr "" #: appPlugins/ToolEtchCompensation.py:438 msgid "Etchants list" msgstr "" #: appPlugins/ToolEtchCompensation.py:439 msgid "Manual offset" msgstr "" #: appPlugins/ToolEtchCompensation.py:451 msgid "Etchants" msgstr "" #: appPlugins/ToolEtchCompensation.py:453 msgid "A list of etchants." msgstr "" #: appPlugins/ToolEtchCompensation.py:456 msgid "Alkaline baths" msgstr "" #: appPlugins/ToolEtchCompensation.py:464 msgid "" "The ratio between depth etch and lateral etch .\n" "Accepts real numbers and formulas using the operators: /,*,+,-,%" msgstr "" #: appPlugins/ToolEtchCompensation.py:468 msgid "Real number or formula" msgstr "" #: appPlugins/ToolEtchCompensation.py:476 msgid "" "Value with which to increase or decrease (buffer)\n" "the copper features. In microns [um]." msgstr "" #: appPlugins/ToolEtchCompensation.py:497 msgid "Compensate" msgstr "" #: appPlugins/ToolEtchCompensation.py:500 msgid "Will increase the copper features thickness to compensate the lateral etch." msgstr "" #: appPlugins/ToolExtract.py:387 msgid "extracted" msgstr "" #: appPlugins/ToolExtract.py:465 appPlugins/ToolExtract.py:570 appPlugins/ToolExtract.py:670 msgid "No drills extracted. Try different parameters." msgstr "" #: appPlugins/ToolExtract.py:767 msgid "No soldermask extracted." msgstr "" #: appPlugins/ToolExtract.py:816 appPlugins/ToolExtract.py:825 appPlugins/ToolExtract.py:829 msgid "No cutout extracted." msgstr "" #: appPlugins/ToolExtract.py:985 msgid "Gerber object from which to extract drill holes or soldermask." msgstr "" #: appPlugins/ToolExtract.py:1027 appPlugins/ToolPunchGerber.py:2058 msgid "Process all Pads." msgstr "" #: appPlugins/ToolExtract.py:1104 appPlugins/ToolExtract.py:1292 msgid "Extract Drills" msgstr "" #: appPlugins/ToolExtract.py:1106 msgid "Extract an Excellon object from the Gerber pads." msgstr "" #: appPlugins/ToolExtract.py:1295 msgid "Extract drills from a given Gerber file." msgstr "" #: appPlugins/ToolFiducials.py:349 msgid "Click to add first Fiducial. Bottom Left..." msgstr "" #: appPlugins/ToolFiducials.py:644 msgid "Click to add the last fiducial. Top Right..." msgstr "" #: appPlugins/ToolFiducials.py:649 msgid "Click to add the second fiducial. Top Left or Bottom Right..." msgstr "" #: appPlugins/ToolFiducials.py:755 msgid "Fiducials Tool exit." msgstr "" #: appPlugins/ToolFiducials.py:855 msgid "Gerber object for adding fiducials and soldermask openings." msgstr "" #: appPlugins/ToolFiducials.py:872 msgid "" "A table with the fiducial points coordinates,\n" "in the format (x, y)." msgstr "" #: appPlugins/ToolFiducials.py:910 appPlugins/ToolMarkers.py:1342 msgid "Top Right" msgstr "" #: appPlugins/ToolFiducials.py:1042 msgid "Thickness of the line that makes the fiducial." msgstr "" #: appPlugins/ToolFiducials.py:1075 msgid "Mode:" msgstr "" #: appPlugins/ToolFiducials.py:1086 msgid "Add Fiducial" msgstr "" #: appPlugins/ToolFiducials.py:1089 msgid "Will add a polygon on the copper layer to serve as fiducial." msgstr "" #: appPlugins/ToolFiducials.py:1100 msgid "Add Soldermask Opening" msgstr "" #: appPlugins/ToolFiducials.py:1102 msgid "" "Will add a polygon on the soldermask layer\n" "to serve as fiducial opening.\n" "The diameter is always double of the diameter\n" "for the copper fiducial." msgstr "" #: appPlugins/ToolFilm.py:318 msgid "Load an object for Film and retry." msgstr "" #: appPlugins/ToolFilm.py:325 msgid "Load an object for Box and retry." msgstr "" #: appPlugins/ToolFilm.py:340 msgid "Generating Film ..." msgstr "" #: appPlugins/ToolFilm.py:403 appPlugins/ToolFilm.py:408 msgid "Export positive film" msgstr "" #: appPlugins/ToolFilm.py:440 msgid "No Excellon object selected. Load an object for punching reference and retry." msgstr "" #: appPlugins/ToolFilm.py:464 appPlugins/ToolFilm.py:476 appPlugins/ToolPunchGerber.py:804 #: appPlugins/ToolPunchGerber.py:937 msgid "Failed. Punch hole size is bigger than some of the apertures in the Gerber object." msgstr "" #: appPlugins/ToolFilm.py:494 appPlugins/ToolPunchGerber.py:877 #: appPlugins/ToolPunchGerber.py:972 msgid "" "Failed. The new object geometry is the same as the one in the source object geometry..." msgstr "" #: appPlugins/ToolFilm.py:559 appPlugins/ToolFilm.py:564 msgid "Export negative film" msgstr "" #: appPlugins/ToolFilm.py:641 appPlugins/ToolFilm.py:863 appPlugins/ToolPanelize.py:338 msgid "No object Box. Using instead" msgstr "" #: appPlugins/ToolFilm.py:697 appPlugins/ToolFilm.py:920 msgid "Film file exported to" msgstr "" #: appPlugins/ToolFilm.py:1029 msgid "" "The artwork has to be within the selected page size in order to be visible.\n" "For 'Bounds' page size, it needs to be in the first quadrant." msgstr "" #: appPlugins/ToolFilm.py:1296 msgid "" "Specify the type of object for which to create the film.\n" "The object can be of type: Gerber or Geometry.\n" "The selection here decide the type of objects that will be\n" "in the Film Object combobox." msgstr "" #: appPlugins/ToolFilm.py:1319 msgid "" "Specify the type of object to be used as an container for\n" "film creation. It can be: Gerber or Geometry type.The selection here decide the type of " "objects that will be\n" "in the Box Object combobox." msgstr "" #: appPlugins/ToolFilm.py:1447 msgid "" "'Length' -> deform by a length value\n" "'Angle' -> deform by an angle\n" "'Ratio' -> deform by a ratio between what should be and what is" msgstr "" #: appPlugins/ToolFilm.py:1622 msgid "Punch drill holes" msgstr "" #: appPlugins/ToolFilm.py:1623 msgid "" "When checked the generated film will have holes in pads when\n" "the generated film is positive. This is done to help drilling,\n" "when done manually." msgstr "" #: appPlugins/ToolFilm.py:1639 msgid "Source" msgstr "" #: appPlugins/ToolFilm.py:1641 msgid "" "The punch hole source can be:\n" "- Excellon -> an Excellon holes center will serve as reference.\n" "- Pad Center -> will try to use the pads center as reference." msgstr "" #: appPlugins/ToolFilm.py:1646 msgid "Pad center" msgstr "" #: appPlugins/ToolFilm.py:1653 msgid "Remove the geometry of Excellon from the Film to create the holes in pads." msgstr "" #: appPlugins/ToolFilm.py:1664 msgid "Punch Size" msgstr "" #: appPlugins/ToolFilm.py:1665 msgid "The value here will control how big is the punch hole in the pads." msgstr "" #: appPlugins/ToolFilm.py:1804 msgid "Save Film" msgstr "" #: appPlugins/ToolFilm.py:1807 msgid "" "Create a Film for the selected object, within\n" "the specified box. Does not create a new \n" " FlatCAM object, but directly save it in the\n" "selected format." msgstr "" #: appPlugins/ToolFilm.py:1887 msgid "" "Using the Pad center does not work on Geometry objects. Only a Gerber object has pads." msgstr "" #: appPlugins/ToolFollow.py:336 appPlugins/ToolFollow.py:404 msgid "Failed to create Follow Geometry." msgstr "" #: appPlugins/ToolFollow.py:693 msgid "" "Create a Geometry object with\n" "toolpaths to cut through the middle of polygons." msgstr "" #: appPlugins/ToolFollow.py:716 msgid "" "A Gerber object to be followed.\n" "Create a Geometry object with a path\n" "following the Gerber traces." msgstr "" #: appPlugins/ToolFollow.py:745 msgid "" "Selection of area to be processed.\n" "- 'All Polygons' - the process will start after click.\n" "- 'Area Selection' - left mouse click to start selection of the area to be processed." msgstr "" #: appPlugins/ToolImage.py:99 appPlugins/ToolImage.py:309 msgid "Image Import" msgstr "" #: appPlugins/ToolImage.py:138 appPlugins/ToolImage.py:141 msgid "Import IMAGE" msgstr "" #: appPlugins/ToolImage.py:176 appPlugins/ToolPDF.py:114 appMain.py:11339 appMain.py:11395 #: appMain.py:11490 appMain.py:11529 appMain.py:11597 appMain.py:11754 appMain.py:11841 msgid "File no longer available." msgstr "" #: appPlugins/ToolImage.py:188 appMain.py:11349 appMain.py:11405 msgid "Not supported type is picked as parameter. Only Geometry and Gerber are supported" msgstr "" #: appPlugins/ToolImage.py:216 appPlugins/ToolPcbWizard.py:373 appMain.py:11368 #: appMain.py:11425 tclCommands/TclCommandImportSvg.py:84 msgid "Importing" msgstr "" #: appPlugins/ToolImage.py:228 appPlugins/ToolPDF.py:230 appMain.py:11366 appMain.py:11423 #: appMain.py:11511 appMain.py:11580 appMain.py:11650 appMain.py:11715 appMain.py:11775 msgid "Opened" msgstr "" #: appPlugins/ToolImage.py:340 msgid "" "Specify the type of object to create from the image.\n" "It can be of type: Gerber or Geometry." msgstr "" #: appPlugins/ToolImage.py:350 msgid "DPI value" msgstr "" #: appPlugins/ToolImage.py:351 msgid "Specify a DPI value for the image." msgstr "" #: appPlugins/ToolImage.py:357 msgid "Level of detail" msgstr "" #: appPlugins/ToolImage.py:363 msgid "Image type" msgstr "" #: appPlugins/ToolImage.py:365 msgid "" "Choose a method for the image interpretation.\n" "B/W means a black & white image. Color means a colored image." msgstr "" #: appPlugins/ToolImage.py:375 appPlugins/ToolImage.py:391 appPlugins/ToolImage.py:405 #: appPlugins/ToolImage.py:419 msgid "Mask value" msgstr "" #: appPlugins/ToolImage.py:377 msgid "" "Mask for monochrome image.\n" "Takes values between [0 ... 255].\n" "Decides the level of details to include\n" "in the resulting geometry.\n" "0 means no detail and 255 means everything \n" "(which is totally black)." msgstr "" #: appPlugins/ToolImage.py:393 msgid "" "Mask for RED color.\n" "Takes values between [0 ... 255].\n" "Decides the level of details to include\n" "in the resulting geometry." msgstr "" #: appPlugins/ToolImage.py:407 msgid "" "Mask for GREEN color.\n" "Takes values between [0 ... 255].\n" "Decides the level of details to include\n" "in the resulting geometry." msgstr "" #: appPlugins/ToolImage.py:421 msgid "" "Mask for BLUE color.\n" "Takes values between [0 ... 255].\n" "Decides the level of details to include\n" "in the resulting geometry." msgstr "" #: appPlugins/ToolImage.py:430 msgid "Import image" msgstr "" #: appPlugins/ToolImage.py:432 msgid "Open a image of raster type and then import it in FlatCAM." msgstr "" #: appPlugins/ToolInvertGerber.py:237 msgid "Gerber object that will be inverted." msgstr "" #: appPlugins/ToolInvertGerber.py:258 msgid "Parameters for this tool" msgstr "" #: appPlugins/ToolInvertGerber.py:305 msgid "" "Will invert the Gerber object: areas that have copper\n" "will be empty of copper and previous empty area will be\n" "filled with copper." msgstr "" #: appPlugins/ToolIsolation.py:1135 appPlugins/ToolIsolation.py:1274 #: appPlugins/ToolNCC.py:976 appPlugins/ToolNCC.py:1120 appPlugins/ToolOptimal.py:263 msgid "" "The Gerber object has one Polygon as geometry.\n" "There are no distances between geometry elements to be found." msgstr "" #: appPlugins/ToolIsolation.py:1168 appPlugins/ToolIsolation.py:1233 #: appPlugins/ToolNCC.py:1009 appPlugins/ToolNCC.py:1078 msgid "Checking tools for validity." msgstr "" #: appPlugins/ToolIsolation.py:1185 appPlugins/ToolIsolation.py:1250 #: appPlugins/ToolNCC.py:1026 appPlugins/ToolNCC.py:1095 msgid "Checking ..." msgstr "" #: appPlugins/ToolIsolation.py:1211 appPlugins/ToolIsolation.py:1669 #: appPlugins/ToolIsolation.py:1990 appPlugins/ToolIsolation.py:2538 #: appPlugins/ToolIsolation.py:2782 appPlugins/ToolNCC.py:1051 appPlugins/ToolNCC.py:1570 #: appPlugins/ToolPaint.py:1186 appPlugins/ToolPaint.py:1895 msgid "There are no tools selected in the Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:1219 msgid "Incomplete isolation. At least one tool could not do a complete isolation." msgstr "" #: appPlugins/ToolIsolation.py:1320 appPlugins/ToolNCC.py:1165 msgid "Optimal tool diameter found" msgstr "" #: appPlugins/ToolIsolation.py:1453 appPlugins/ToolMilling.py:2194 #: appPlugins/ToolNCC.py:1314 appPlugins/ToolPaint.py:969 msgid "New tool added to Tool Table from Tools Database." msgstr "" #: appPlugins/ToolIsolation.py:1501 appPlugins/ToolNCC.py:1374 appPlugins/ToolPaint.py:1028 msgid "Default tool added to Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:1532 appPlugins/ToolNCC.py:1431 appPlugins/ToolPaint.py:1053 msgid "Tool from Tool Table was edited." msgstr "" #: appPlugins/ToolIsolation.py:1544 appPlugins/ToolNCC.py:1444 appPlugins/ToolPaint.py:1066 #: appPlugins/ToolSolderPaste.py:612 msgid "Cancelled. New diameter value is already in the Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:1592 appPlugins/ToolNCC.py:1495 appPlugins/ToolPaint.py:1116 #: appPlugins/ToolSolderPaste.py:657 msgid "Delete failed. Select a tool to delete." msgstr "" #: appPlugins/ToolIsolation.py:1598 appPlugins/ToolNCC.py:1501 appPlugins/ToolPaint.py:1122 msgid "Tool(s) deleted from Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:1648 msgid "Isolating" msgstr "" #: appPlugins/ToolIsolation.py:1702 msgid "Click on a polygon to isolate it." msgstr "" #: appPlugins/ToolIsolation.py:1871 appPlugins/ToolIsolation.py:1896 #: appPlugins/ToolIsolation.py:2050 appPlugins/ToolIsolation.py:2258 msgid "Subtracting Geo" msgstr "" #: appPlugins/ToolIsolation.py:1875 appPlugins/ToolIsolation.py:2054 #: appPlugins/ToolIsolation.py:2262 msgid "Intersecting Geo" msgstr "" #: appPlugins/ToolIsolation.py:1922 appPlugins/ToolIsolation.py:2119 #: appPlugins/ToolIsolation.py:2327 msgid "Empty Geometry in" msgstr "" #: appPlugins/ToolIsolation.py:2128 msgid "" "Partial failure. The geometry was processed with all tools.\n" "But there are still not-isolated geometry elements. Try to include a tool with smaller " "diameter." msgstr "" #: appPlugins/ToolIsolation.py:2131 msgid "The following are coordinates for the copper features that could not be isolated:" msgstr "" #: appPlugins/ToolIsolation.py:2504 appPlugins/ToolPaint.py:1297 msgid "Removed polygon" msgstr "" #: appPlugins/ToolIsolation.py:2505 appPlugins/ToolPaint.py:1298 msgid "Click to add/remove next polygon or right click to start." msgstr "" #: appPlugins/ToolIsolation.py:2510 appPlugins/ToolPaint.py:1303 msgid "No polygon detected under click position." msgstr "" #: appPlugins/ToolIsolation.py:2552 appPlugins/ToolPaint.py:1333 #: appPlugins/ToolPunchGerber.py:1765 msgid "List of single polygons is empty. Aborting." msgstr "" #: appPlugins/ToolIsolation.py:2687 msgid "Click the end point of the paint area." msgstr "" #: appPlugins/ToolIsolation.py:2951 appPlugins/ToolNCC.py:3956 appPlugins/ToolPaint.py:2824 #: appMain.py:6776 appMain.py:6795 msgid "Tool from DB added in Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:3001 appPlugins/ToolNCC.py:4005 appPlugins/ToolPaint.py:2880 msgid "New tool added to Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:3349 msgid "Gerber object for isolation routing." msgstr "" #: appPlugins/ToolIsolation.py:3373 appPlugins/ToolNCC.py:4143 msgid "" "Tools pool from which the algorithm\n" "will pick the ones used for copper clearing." msgstr "" #: appPlugins/ToolIsolation.py:3397 msgid "" "This is the Tool Number.\n" "Isolation routing will start with the tool with the biggest \n" "diameter, continuing until there are no more tools.\n" "Only tools that create Isolation geometry will still be present\n" "in the resulting geometry. This is because with some tools\n" "this function will not be able to create routing geometry." msgstr "" #: appPlugins/ToolIsolation.py:3439 appPlugins/ToolMilling.py:4223 appPlugins/ToolNCC.py:230 #: appPlugins/ToolNCC.py:4223 appPlugins/ToolPaint.py:227 appPlugins/ToolPaint.py:3093 msgid "Add from DB" msgstr "" #: appPlugins/ToolIsolation.py:3461 appPlugins/ToolNCC.py:4250 msgid "" "Find a tool diameter that is guaranteed\n" "to do a complete isolation." msgstr "" #: appPlugins/ToolIsolation.py:3500 appPlugins/ToolMilling.py:4273 #: appPlugins/ToolNCC.py:4289 appPlugins/ToolPaint.py:3145 #: appPlugins/ToolSolderPaste.py:1303 msgid "" "Delete a selection of tools in the Tool Table\n" "by first selecting a row in the Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:3795 msgid "" "Specify the type of object to be excepted from isolation.\n" "It can be of type: Gerber or Geometry.\n" "What is selected here will dictate the kind\n" "of objects that will populate the 'Object' combobox." msgstr "" #: appPlugins/ToolIsolation.py:3805 msgid "Object whose area will be removed from isolation geometry." msgstr "" #: appPlugins/ToolIsolation.py:3876 appPlugins/ToolPunchGerber.py:2338 msgid "Select all available." msgstr "" #: appPlugins/ToolIsolation.py:3882 appPlugins/ToolPunchGerber.py:2344 msgid "Clear the selection." msgstr "" #: appPlugins/ToolIsolation.py:3921 msgid "" "Create a Geometry object with toolpaths to cut \n" "isolation outside, inside or on both sides of the\n" "object. For a Gerber object outside means outside\n" "of the Gerber feature and inside means inside of\n" "the Gerber feature, if possible at all. This means\n" "that only if the Gerber feature has openings inside, they\n" "will be isolated. If what is wanted is to cut isolation\n" "inside the actual Gerber feature, use a negative tool\n" "diameter above." msgstr "" #: appPlugins/ToolLevelling.py:574 appPlugins/ToolLevelling.py:904 msgid "" "Voronoi function can not be loaded.\n" "Shapely >= 1.8 is required" msgstr "" #: appPlugins/ToolLevelling.py:602 msgid "Click on canvas to add a Probe Point..." msgstr "" #: appPlugins/ToolLevelling.py:850 msgid "Point is not within the object area. Choose another point." msgstr "" #: appPlugins/ToolLevelling.py:870 msgid "Added a Probe Point... Click again to add another or right click to finish ..." msgstr "" #: appPlugins/ToolLevelling.py:892 msgid "Finished adding Probe Points..." msgstr "" #: appPlugins/ToolLevelling.py:1102 msgid "COM list updated ..." msgstr "" #: appPlugins/ToolLevelling.py:1138 msgid "Connected" msgstr "" #: appPlugins/ToolLevelling.py:1144 appPlugins/ToolLevelling.py:1166 #: appPlugins/ToolLevelling.py:2029 appPlugins/ToolLevelling.py:2044 msgid "Control" msgstr "" #: appPlugins/ToolLevelling.py:1146 appPlugins/ToolLevelling.py:1168 #: appPlugins/ToolLevelling.py:2039 appPlugins/ToolLevelling.py:2046 msgid "Sender" msgstr "" #: appPlugins/ToolLevelling.py:1149 msgid "Port connected" msgstr "" #: appPlugins/ToolLevelling.py:1153 msgid "Could not connect to GRBL on port" msgstr "" #: appPlugins/ToolLevelling.py:1160 appPlugins/ToolLevelling.py:2120 msgid "Disconnected" msgstr "" #: appPlugins/ToolLevelling.py:1170 msgid "Port is connected. Disconnecting" msgstr "" #: appPlugins/ToolLevelling.py:1172 msgid "Could not connect to port" msgstr "" #: appPlugins/ToolLevelling.py:1202 appPlugins/ToolLevelling.py:1636 msgid "Sending" msgstr "" #: appPlugins/ToolLevelling.py:1331 msgid "GRBL is doing a home cycle." msgstr "" #: appPlugins/ToolLevelling.py:1337 msgid "GRBL software reset was sent." msgstr "" #: appPlugins/ToolLevelling.py:1345 msgid "GRBL resumed." msgstr "" #: appPlugins/ToolLevelling.py:1349 msgid "GRBL paused." msgstr "" #: appPlugins/ToolLevelling.py:1523 msgid "There is nothing to view" msgstr "" #: appPlugins/ToolLevelling.py:1529 msgid "Code Viewer" msgstr "" #: appPlugins/ToolLevelling.py:1567 msgid "Loaded Machine Code into Code Viewer" msgstr "" #: appPlugins/ToolLevelling.py:1581 appPlugins/ToolLevelling.py:1585 #: appPlugins/ToolLevelling.py:2334 msgid "Import Height Map" msgstr "" #: appPlugins/ToolLevelling.py:1612 msgid "Failed to open height map file" msgstr "" #: appPlugins/ToolLevelling.py:1662 msgid "Finished probing. Doing the autolevelling." msgstr "" #: appPlugins/ToolLevelling.py:1667 msgid "Sending probing GCode to the GRBL controller." msgstr "" #: appPlugins/ToolLevelling.py:1710 msgid "Empty GRBL heightmap." msgstr "" #: appPlugins/ToolLevelling.py:1714 msgid "Finished autolevelling." msgstr "" #: appPlugins/ToolLevelling.py:1783 msgid "CNCJob source object to be levelled." msgstr "" #: appPlugins/ToolLevelling.py:1816 msgid "Probe Points Table" msgstr "" #: appPlugins/ToolLevelling.py:1817 msgid "Generate GCode that will obtain the height map" msgstr "" #: appPlugins/ToolLevelling.py:1819 msgid "Show" msgstr "" #: appPlugins/ToolLevelling.py:1820 msgid "Toggle the display of the Probe Points table." msgstr "" #: appPlugins/ToolLevelling.py:1843 msgid "X-Y Coordinates" msgstr "" #: appPlugins/ToolLevelling.py:1843 msgid "Height" msgstr "" #: appPlugins/ToolLevelling.py:1847 msgid "Plot probing points" msgstr "" #: appPlugins/ToolLevelling.py:1849 msgid "" "Plot the probing points in the table.\n" "If a Voronoi method is used then\n" "the Voronoi areas are also plotted." msgstr "" #: appPlugins/ToolLevelling.py:1860 msgid "" "Will create a GCode which will be sent to the controller,\n" "either through a file or directly, with the intent to get the height map\n" "that is to modify the original GCode to level the cutting height." msgstr "" #: appPlugins/ToolLevelling.py:1969 msgid "Add Probe Points" msgstr "" #: appPlugins/ToolLevelling.py:2060 msgid "COM list" msgstr "" #: appPlugins/ToolLevelling.py:2062 appPlugins/ToolLevelling.py:2077 msgid "Lists the available serial ports." msgstr "" #: appPlugins/ToolLevelling.py:2066 msgid "Search" msgstr "" #: appPlugins/ToolLevelling.py:2068 msgid "Search for the available serial ports." msgstr "" #: appPlugins/ToolLevelling.py:2075 msgid "Baud rates" msgstr "" #: appPlugins/ToolLevelling.py:2094 msgid "New, custom baudrate." msgstr "" #: appPlugins/ToolLevelling.py:2102 msgid "Add the specified custom baudrate to the list." msgstr "" #: appPlugins/ToolLevelling.py:2108 msgid "Delete selected baudrate" msgstr "" #: appPlugins/ToolLevelling.py:2112 msgid "Reset" msgstr "" #: appPlugins/ToolLevelling.py:2114 msgid "Software reset of the controller." msgstr "" #: appPlugins/ToolLevelling.py:2122 msgid "Connect to the selected port with the selected baud rate." msgstr "" #: appPlugins/ToolLevelling.py:2146 msgid "Jog" msgstr "" #: appPlugins/ToolLevelling.py:2154 msgid "Zero Axes" msgstr "" #: appPlugins/ToolLevelling.py:2188 msgid "Pause/Resume" msgstr "" #: appPlugins/ToolLevelling.py:2247 msgid "Send Command" msgstr "" #: appPlugins/ToolLevelling.py:2249 appPlugins/ToolLevelling.py:2259 msgid "Send a custom command to GRBL." msgstr "" #: appPlugins/ToolLevelling.py:2254 msgid "Type GRBL command ..." msgstr "" #: appPlugins/ToolLevelling.py:2257 msgid "Send" msgstr "" #: appPlugins/ToolLevelling.py:2265 msgid "Get Config parameter" msgstr "" #: appPlugins/ToolLevelling.py:2267 msgid "A GRBL configuration parameter." msgstr "" #: appPlugins/ToolLevelling.py:2272 msgid "Type GRBL parameter ..." msgstr "" #: appPlugins/ToolLevelling.py:2275 msgid "Get" msgstr "" #: appPlugins/ToolLevelling.py:2277 msgid "Get the value of a specified GRBL parameter." msgstr "" #: appPlugins/ToolLevelling.py:2285 msgid "Get Report" msgstr "" #: appPlugins/ToolLevelling.py:2287 msgid "Print in shell the GRBL report." msgstr "" #: appPlugins/ToolLevelling.py:2293 msgid "Apply AutoLevelling" msgstr "" #: appPlugins/ToolLevelling.py:2295 msgid "" "Will send the probing GCode to the GRBL controller,\n" "wait for the Z probing data and then apply this data\n" "over the original GCode therefore doing autolevelling." msgstr "" #: appPlugins/ToolLevelling.py:2304 msgid "Will save the GRBL height map." msgstr "" #: appPlugins/ToolLevelling.py:2314 msgid "Save Probing GCode" msgstr "" #: appPlugins/ToolLevelling.py:2316 msgid "Will save the probing GCode." msgstr "" #: appPlugins/ToolLevelling.py:2327 msgid "View/Edit the probing GCode." msgstr "" #: appPlugins/ToolLevelling.py:2336 msgid "" "Import the file that has the Z heights\n" "obtained through probing and then apply this data\n" "over the original GCode therefore\n" "doing autolevelling." msgstr "" #: appPlugins/ToolMarkers.py:300 appPlugins/ToolMarkers.py:1110 msgid "Click to add next marker or right click to finish." msgstr "" #: appPlugins/ToolMarkers.py:447 appPlugins/ToolMarkers.py:758 appPlugins/ToolMarkers.py:804 #: appPlugins/ToolMarkers.py:867 appPlugins/ToolMarkers.py:913 msgid "Please select at least a location" msgstr "" #: appPlugins/ToolMarkers.py:735 appPlugins/ToolMarkers.py:844 msgid "The tool diameter is zero." msgstr "" #: appPlugins/ToolMarkers.py:836 appPlugins/ToolMarkers.py:952 msgid "Excellon object with corner drills created." msgstr "" #: appPlugins/ToolMarkers.py:988 appPlugins/ToolSolderPaste.py:932 msgid "There is no Geometry object available." msgstr "" #: appPlugins/ToolMarkers.py:1052 msgid "A Gerber object with corner markers was created." msgstr "" #: appPlugins/ToolMarkers.py:1109 msgid "Added marker" msgstr "" #: appPlugins/ToolMarkers.py:1190 msgid "The Gerber object to which will be added corner markers." msgstr "" #: appPlugins/ToolMarkers.py:1276 msgid "" "Reference for offseting the marker locations.\n" "- Edge - referenced from the bounding box edge\n" "- Center - referenced from the bounding box center" msgstr "" #: appPlugins/ToolMarkers.py:1326 msgid "Locations" msgstr "" #: appPlugins/ToolMarkers.py:1327 msgid "Locations where to place corner markers." msgstr "" #: appPlugins/ToolMarkers.py:1359 msgid "Toggle ALL" msgstr "" #: appPlugins/ToolMarkers.py:1378 msgid "" "When the manual type is chosen, the markers\n" "are manually placed on canvas." msgstr "" #: appPlugins/ToolMarkers.py:1393 msgid "Add Marker" msgstr "" #: appPlugins/ToolMarkers.py:1396 appPlugins/ToolMarkers.py:1506 msgid "Will add corner markers to the selected object." msgstr "" #: appPlugins/ToolMarkers.py:1410 msgid "Drills in Locations" msgstr "" #: appPlugins/ToolMarkers.py:1437 msgid "Will add drill holes in the center of the markers." msgstr "" #: appPlugins/ToolMarkers.py:1450 msgid "Check in Locations" msgstr "" #: appPlugins/ToolMarkers.py:1457 msgid "" "Will create an Excellon object using a special preprocessor.\n" "The spindle will not start and the mounted probe will move to\n" "the corner locations, wait for the user interaction and then\n" "move to the next location until the last one." msgstr "" #: appPlugins/ToolMarkers.py:1473 msgid "Insert Markers" msgstr "" #: appPlugins/ToolMarkers.py:1484 msgid "Specify the type of object where the markers are inserted." msgstr "" #: appPlugins/ToolMarkers.py:1503 msgid "Insert Marker" msgstr "" #: appPlugins/ToolMilling.py:911 msgid "Could not build the Plugin UI" msgstr "" #: appPlugins/ToolMilling.py:1372 msgid "Milling Tool" msgstr "" #: appPlugins/ToolMilling.py:1442 msgid "Pressure" msgstr "" #: appPlugins/ToolMilling.py:1444 msgid "" "Negative value. The higher the absolute value\n" "the stronger the pressure of the brush on the material." msgstr "" #: appPlugins/ToolMilling.py:1970 msgid "" "For V-shape tools the depth of cut is\n" "calculated from other parameters like:\n" "- 'V-tip Angle' -> angle at the tip of the tool\n" "- 'V-tip Dia' -> diameter at the tip of the tool \n" "- Tool Dia -> 'Dia' column found in the Tool Table\n" "NB: a value of zero means that Tool Dia = 'V-tip Dia'" msgstr "" #: appPlugins/ToolMilling.py:2252 msgid "Tool added in Tool Table." msgstr "" #: appPlugins/ToolMilling.py:2367 msgid "Tool was edited in Tool Table." msgstr "" #: appPlugins/ToolMilling.py:2396 appPlugins/ToolMilling.py:2405 msgid "Failed. Select a tool to copy." msgstr "" #: appPlugins/ToolMilling.py:2429 msgid "Tool was copied in Tool Table." msgstr "" #: appPlugins/ToolMilling.py:2461 appPlugins/ToolMilling.py:2470 msgid "Failed. Select a tool to delete." msgstr "" #: appPlugins/ToolMilling.py:2491 msgid "Tool was deleted in Tool Table." msgstr "" #: appPlugins/ToolMilling.py:2594 msgid "Generating drills milling geometry..." msgstr "" #: appPlugins/ToolMilling.py:2693 msgid "Generating slot milling geometry..." msgstr "" #: appPlugins/ToolMilling.py:2785 appPlugins/ToolMilling.py:2950 msgid "This Geometry can't be processed because it is" msgstr "" #: appPlugins/ToolMilling.py:2818 appPlugins/ToolMilling.py:2984 msgid "Failed. No tool selected in the tool table ..." msgstr "" #: appPlugins/ToolMilling.py:3328 appPlugins/ToolPaint.py:1839 msgid "Geometry could not be painted completely" msgstr "" #: appPlugins/ToolMilling.py:3985 appPlugins/ToolNCC.py:4093 appPlugins/ToolPaint.py:2970 msgid "Source object for milling operation." msgstr "" #: appPlugins/ToolMilling.py:3998 msgid "Object for milling operation." msgstr "" #: appPlugins/ToolMilling.py:4037 msgid "Tools in the object used for milling." msgstr "" #: appPlugins/ToolMilling.py:4185 msgid "" "This is the Tool Number.\n" "When ToolChange is checked, on toolchange event this value\n" "will be showed as a T1, T2 ... Tn" msgstr "" #: appPlugins/ToolMilling.py:4195 msgid "" "Plot column. It is visible only for MultiGeo geometries, meaning geometries that holds " "the geometry\n" "data into the tools. For those geometries, deleting the tool will delete the geometry " "data also,\n" "so be WARNED. From the checkboxes on each row it can be enabled/disabled the plot on " "canvas\n" "for the corresponding tool." msgstr "" #: appPlugins/ToolMilling.py:4355 msgid "Offset Type" msgstr "" #: appPlugins/ToolMilling.py:4358 msgid "" "The value for the Offset can be:\n" "- Path -> There is no offset, the tool cut will be done through the geometry line.\n" "- In(side) -> The tool cut will follow the geometry inside. It will create a 'pocket'.\n" "- Out(side) -> The tool cut will follow the geometry line on the outside.\n" "- Custom -> The tool will cut at an chosen offset." msgstr "" #: appPlugins/ToolMilling.py:4378 msgid "" "The value to offset the cut when \n" "the Offset type selected is 'Custom'.\n" "The value can be positive for 'outside'\n" "cut and negative for 'inside' cut." msgstr "" #: appPlugins/ToolMilling.py:4921 msgid "" "The preprocessor JSON file that dictates\n" "Gcode output for Geometry (Milling) Objects." msgstr "" #: appPlugins/ToolMilling.py:4932 msgid "Allow levelling" msgstr "" #: appPlugins/ToolMilling.py:4934 msgid "Allow levelling by having segments size more than zero." msgstr "" #: appPlugins/ToolMove.py:102 msgid "MOVE: Click on the Start point ..." msgstr "" #: appPlugins/ToolMove.py:113 msgid "Cancelled. No object(s) to move." msgstr "" #: appPlugins/ToolMove.py:162 msgid "Error when mouse left click." msgstr "" #: appPlugins/ToolNCC.py:1063 msgid "Incomplete isolation. None of the selected tools could do a complete isolation." msgstr "" #: appPlugins/ToolNCC.py:1066 msgid "At least one of the selected tools can do a complete isolation." msgstr "" #: appPlugins/ToolNCC.py:1211 appPlugins/ToolNCC.py:1290 appPlugins/ToolNCC.py:1348 #: appPlugins/ToolNCC.py:3992 appPlugins/ToolPaint.py:857 appPlugins/ToolPaint.py:943 #: appPlugins/ToolPaint.py:1003 appPlugins/ToolPaint.py:2867 #: appPlugins/ToolSolderPaste.py:552 msgid "Cancelled. Tool already in Tool Table." msgstr "" #: appPlugins/ToolNCC.py:1947 appPlugins/ToolNCC.py:2933 msgid "NCC Tool. Preparing non-copper polygons." msgstr "" #: appPlugins/ToolNCC.py:2007 appPlugins/ToolNCC.py:3052 msgid "NCC Tool. Calculate 'empty' area." msgstr "" #: appPlugins/ToolNCC.py:2018 appPlugins/ToolNCC.py:2047 appPlugins/ToolNCC.py:2153 #: appPlugins/ToolNCC.py:2166 appPlugins/ToolNCC.py:3067 appPlugins/ToolNCC.py:3172 #: appPlugins/ToolNCC.py:3187 appPlugins/ToolNCC.py:3455 appPlugins/ToolNCC.py:3556 #: appPlugins/ToolNCC.py:3571 msgid "Buffering finished" msgstr "" #: appPlugins/ToolNCC.py:2022 appPlugins/ToolNCC.py:2051 appPlugins/ToolNCC.py:2157 #: appPlugins/ToolNCC.py:2169 appPlugins/ToolNCC.py:3075 appPlugins/ToolNCC.py:3194 #: appPlugins/ToolNCC.py:3462 appPlugins/ToolNCC.py:3578 msgid "Could not get the extent of the area to be non copper cleared." msgstr "" #: appPlugins/ToolNCC.py:2030 appPlugins/ToolNCC.py:2180 appPlugins/ToolNCC.py:3205 msgid "NCC Tool. Finished calculation of 'empty' area." msgstr "" #: appPlugins/ToolNCC.py:2083 appPlugins/ToolNCC.py:3102 appPlugins/ToolNCC.py:3179 #: appPlugins/ToolNCC.py:3482 appPlugins/ToolNCC.py:3563 msgid "Isolation geometry is broken. Margin is less than isolation tool diameter." msgstr "" #: appPlugins/ToolNCC.py:2173 appPlugins/ToolNCC.py:3198 appPlugins/ToolNCC.py:3581 msgid "The selected object is not suitable for copper clearing." msgstr "" #: appPlugins/ToolNCC.py:2223 msgid "Clearing the polygon with the method: lines." msgstr "" #: appPlugins/ToolNCC.py:2233 msgid "Failed. Clearing the polygon with the method: seed." msgstr "" #: appPlugins/ToolNCC.py:2242 msgid "Failed. Clearing the polygon with the method: standard." msgstr "" #: appPlugins/ToolNCC.py:2258 msgid "Polygon could not be cleared. Location:" msgstr "" #: appPlugins/ToolNCC.py:2311 msgid "There is no copper clearing tool in the selection and at least one is needed." msgstr "" #: appPlugins/ToolNCC.py:2326 appPlugins/ToolNCC.py:3020 msgid "NCC Tool. Finished non-copper polygons. Normal copper clearing task started." msgstr "" #: appPlugins/ToolNCC.py:2354 appPlugins/ToolNCC.py:2592 msgid "NCC Tool failed creating bounding box." msgstr "" #: appPlugins/ToolNCC.py:2374 appPlugins/ToolNCC.py:2635 appPlugins/ToolNCC.py:3219 #: appPlugins/ToolNCC.py:3606 msgid "NCC Tool clearing with tool diameter" msgstr "" #: appPlugins/ToolNCC.py:2374 appPlugins/ToolNCC.py:2635 appPlugins/ToolNCC.py:3219 #: appPlugins/ToolNCC.py:3606 msgid "started." msgstr "" #: appPlugins/ToolNCC.py:2509 msgid "Could not use the tool for copper clear." msgstr "" #: appPlugins/ToolNCC.py:2532 appPlugins/ToolNCC.py:3381 msgid "" "There is no NCC Geometry in the file.\n" "Usually it means that the tool diameter is too big for the painted geometry.\n" "Change the painting parameters and try again." msgstr "" #: appPlugins/ToolNCC.py:2542 appPlugins/ToolNCC.py:3390 msgid "NCC Tool clear all done." msgstr "" #: appPlugins/ToolNCC.py:2545 appPlugins/ToolNCC.py:3393 msgid "NCC Tool clear all done but the copper features isolation is broken for" msgstr "" #: appPlugins/ToolNCC.py:2547 appPlugins/ToolNCC.py:2797 appPlugins/ToolNCC.py:3395 #: appPlugins/ToolNCC.py:3778 msgid "tools" msgstr "" #: appPlugins/ToolNCC.py:2574 msgid "NCC Tool. Rest machining copper clearing task started." msgstr "" #: appPlugins/ToolNCC.py:2793 appPlugins/ToolNCC.py:3774 msgid "NCC Tool Rest Machining clear all done." msgstr "" #: appPlugins/ToolNCC.py:2796 appPlugins/ToolNCC.py:3777 msgid "" "NCC Tool Rest Machining clear all done but the copper features isolation is broken for" msgstr "" #: appPlugins/ToolNCC.py:2894 msgid "NCC Tool started. Reading parameters." msgstr "" #: appPlugins/ToolNCC.py:3883 msgid "" "Try to use the Buffering Type = Full in Preferences -> Gerber General. Reload the Gerber " "file after this change." msgstr "" #: appPlugins/ToolNCC.py:4109 msgid "" "Specify the type of object to be cleared of excess copper.\n" "It can be of type: Gerber or Geometry.\n" "What is selected here will dictate the kind\n" "of objects that will populate the 'Object' combobox." msgstr "" #: appPlugins/ToolNCC.py:4167 msgid "" "This is the Tool Number.\n" "Non copper clearing will start with the tool with the biggest \n" "diameter, continuing until there are no more tools.\n" "Only tools that create NCC clearing geometry will still be present\n" "in the resulting geometry. This is because with some tools\n" "this function will not be able to create painting geometry." msgstr "" #: appPlugins/ToolNCC.py:4576 msgid "" "The type of FlatCAM object to be used as non copper clearing reference.\n" "It can be Gerber, Excellon or Geometry." msgstr "" #: appPlugins/ToolObjectDistance.py:99 appPlugins/ToolObjectDistance.py:445 msgid "Object Distance" msgstr "" #: appPlugins/ToolObjectDistance.py:201 msgid "Objects intersects or touch at" msgstr "" #: appPlugins/ToolObjectDistance.py:212 appPlugins/ToolObjectDistance.py:236 #: appPlugins/ToolObjectDistance.py:246 appPlugins/ToolObjectDistance.py:257 #: appPlugins/ToolObjectDistance.py:280 appPlugins/ToolObjectDistance.py:309 #: appPlugins/ToolObjectDistance.py:327 appPlugins/ToolObjectDistance.py:346 msgid "Select two objects and no more. Currently the selection has objects: " msgstr "" #: appPlugins/ToolObjectDistance.py:373 msgid "Jumped to the half point between the two selected objects" msgstr "" #: appPlugins/ToolObjectDistance.py:476 msgid "" "The type of distance to be calculated.\n" "- Nearest points - minimal distance between objects\n" "- Center points - distance between the center of the bounding boxes" msgstr "" #: appPlugins/ToolObjectDistance.py:482 msgid "Nearest points" msgstr "" #: appPlugins/ToolObjectDistance.py:482 msgid "Center points" msgstr "" #: appPlugins/ToolObjectDistance.py:600 msgid "Half Point" msgstr "" #: appPlugins/ToolObjectDistance.py:601 appPlugins/ToolObjectDistance.py:606 msgid "This is the middle point of the point to point Euclidean distance." msgstr "" #: appPlugins/ToolObjectDistance.py:616 msgid "Jump to Half Point" msgstr "" #: appPlugins/ToolOptimal.py:116 appPlugins/ToolOptimal.py:475 msgid "Find Optimal" msgstr "" #: appPlugins/ToolOptimal.py:227 msgid "Only Gerber objects can be evaluated." msgstr "" #: appPlugins/ToolOptimal.py:233 msgid "Optimal Tool. Started to search for the minimum distance between copper features." msgstr "" #: appPlugins/ToolOptimal.py:243 msgid "Optimal Tool. Parsing geometry for aperture" msgstr "" #: appPlugins/ToolOptimal.py:254 msgid "Optimal Tool. Creating a buffer for the object geometry." msgstr "" #: appPlugins/ToolOptimal.py:268 msgid "Optimal Tool. Finding the distances between each two elements. Iterations" msgstr "" #: appPlugins/ToolOptimal.py:302 msgid "Optimal Tool. Finding the minimum distance." msgstr "" #: appPlugins/ToolOptimal.py:319 msgid "Optimal Tool. Finished successfully." msgstr "" #: appPlugins/ToolOptimal.py:511 msgid "GERBER" msgstr "" #: appPlugins/ToolOptimal.py:537 msgid "Number of decimals kept for found distances." msgstr "" #: appPlugins/ToolOptimal.py:548 msgid "Minimum distance" msgstr "" #: appPlugins/ToolOptimal.py:549 msgid "Display minimum distance between copper features." msgstr "" #: appPlugins/ToolOptimal.py:559 msgid "Determined" msgstr "" #: appPlugins/ToolOptimal.py:571 msgid "Occurring" msgstr "" #: appPlugins/ToolOptimal.py:572 msgid "How many times this minimum is found." msgstr "" #: appPlugins/ToolOptimal.py:580 msgid "Minimum points coordinates" msgstr "" #: appPlugins/ToolOptimal.py:581 appPlugins/ToolOptimal.py:587 msgid "Coordinates for points where minimum distance was found." msgstr "" #: appPlugins/ToolOptimal.py:600 appPlugins/ToolOptimal.py:685 msgid "Jump to selected position" msgstr "" #: appPlugins/ToolOptimal.py:602 appPlugins/ToolOptimal.py:687 msgid "" "Select a position in the Locations text box and then\n" "click this button." msgstr "" #: appPlugins/ToolOptimal.py:612 msgid "Other distances" msgstr "" #: appPlugins/ToolOptimal.py:613 msgid "" "Will display other distances in the Gerber file ordered from\n" "the minimum to the maximum, not including the absolute minimum." msgstr "" #: appPlugins/ToolOptimal.py:624 msgid "Other distances points coordinates" msgstr "" #: appPlugins/ToolOptimal.py:625 appPlugins/ToolOptimal.py:640 appPlugins/ToolOptimal.py:647 #: appPlugins/ToolOptimal.py:664 appPlugins/ToolOptimal.py:671 msgid "" "Other distances and the coordinates for points\n" "where the distance was found." msgstr "" #: appPlugins/ToolOptimal.py:639 msgid "Gerber distances" msgstr "" #: appPlugins/ToolOptimal.py:663 msgid "Points coordinates" msgstr "" #: appPlugins/ToolOptimal.py:695 msgid "Find Minimum" msgstr "" #: appPlugins/ToolOptimal.py:698 msgid "" "Calculate the minimum distance between copper features,\n" "this will allow the determination of the right tool to\n" "use for isolation or copper clearing." msgstr "" #: appPlugins/ToolPDF.py:96 appPlugins/ToolPDF.py:100 msgid "Open PDF" msgstr "" #: appPlugins/ToolPDF.py:103 msgid "Open PDF cancelled" msgstr "" #: appPlugins/ToolPDF.py:131 msgid "Parsing" msgstr "" #: appPlugins/ToolPDF.py:212 appMain.py:11615 msgid "Failed to open" msgstr "" #: appPlugins/ToolPDF.py:288 appPlugins/ToolPcbWizard.py:368 appMain.py:11560 msgid "No geometry found in file" msgstr "" #: appPlugins/ToolPDF.py:291 appPlugins/ToolPDF.py:364 #, python-format msgid "Rendering PDF layer #%d ..." msgstr "" #: appPlugins/ToolPDF.py:295 appPlugins/ToolPDF.py:368 msgid "Open PDF file failed." msgstr "" #: appPlugins/ToolPDF.py:300 appPlugins/ToolPDF.py:373 msgid "Rendered" msgstr "" #: appPlugins/ToolPaint.py:1164 msgid "Can't do Paint on MultiGeo geometries" msgstr "" #: appPlugins/ToolPaint.py:1201 msgid "Click on a polygon to paint it." msgstr "" #: appPlugins/ToolPaint.py:1800 msgid "Painting polygon with method: lines." msgstr "" #: appPlugins/ToolPaint.py:1812 msgid "Failed. Painting polygon with method: seed." msgstr "" #: appPlugins/ToolPaint.py:1823 msgid "Failed. Painting polygon with method: standard." msgstr "" #: appPlugins/ToolPaint.py:1915 appPlugins/ToolPaint.py:2104 msgid "Painting with tool diameter = " msgstr "" #: appPlugins/ToolPaint.py:1918 appPlugins/ToolPaint.py:2107 msgid "started" msgstr "" #: appPlugins/ToolPaint.py:1945 appPlugins/ToolPaint.py:2094 msgid "There is no geometry to process or the tool diameter is too big." msgstr "" #: appPlugins/ToolPaint.py:2060 appPlugins/ToolPaint.py:2286 msgid "" "There is no Painting Geometry in the file.\n" "Usually it means that the tool diameter is too big for the painted geometry.\n" "Change the painting parameters and try again." msgstr "" #: appPlugins/ToolPaint.py:2340 msgid "Painting ..." msgstr "" #: appPlugins/ToolPaint.py:2374 appPlugins/ToolPaint.py:2379 appPlugins/ToolPaint.py:2387 #: appPlugins/ToolPaint.py:2476 appPlugins/ToolPaint.py:2479 appPlugins/ToolPaint.py:2487 #: appPlugins/ToolPaint.py:2558 appPlugins/ToolPaint.py:2563 appPlugins/ToolPaint.py:2569 msgid "Paint Plugin." msgstr "" #: appPlugins/ToolPaint.py:2375 appPlugins/ToolPaint.py:2379 appPlugins/ToolPaint.py:2387 msgid "Normal painting polygon task started." msgstr "" #: appPlugins/ToolPaint.py:2376 appPlugins/ToolPaint.py:2476 appPlugins/ToolPaint.py:2560 msgid "Buffering geometry..." msgstr "" #: appPlugins/ToolPaint.py:2401 appPlugins/ToolPaint.py:2494 appPlugins/ToolPaint.py:2607 msgid "No polygon found." msgstr "" #: appPlugins/ToolPaint.py:2476 appPlugins/ToolPaint.py:2479 appPlugins/ToolPaint.py:2487 msgid "Paint all polygons task started." msgstr "" #: appPlugins/ToolPaint.py:2559 appPlugins/ToolPaint.py:2563 appPlugins/ToolPaint.py:2569 msgid "Painting area task started." msgstr "" #: appPlugins/ToolPaint.py:2947 msgid "" "Create a Geometry object with toolpaths\n" "that cover only the copper pattern." msgstr "" #: appPlugins/ToolPaint.py:2986 msgid "" "Specify the type of object to be painted.\n" "It can be of type: Gerber or Geometry.\n" "What is selected here will dictate the kind\n" "of objects that will populate the 'Object' combobox." msgstr "" #: appPlugins/ToolPaint.py:3020 msgid "" "Tools pool from which the algorithm\n" "will pick the ones used for painting." msgstr "" #: appPlugins/ToolPaint.py:3043 msgid "" "This is the Tool Number.\n" "Painting will start with the tool with the biggest diameter,\n" "continuing until there are no more tools.\n" "Only tools that create painting geometry will still be present\n" "in the resulting geometry. This is because with some tools\n" "this function will not be able to create painting geometry." msgstr "" #: appPlugins/ToolPaint.py:3326 msgid "" "The type of FlatCAM object to be used as paint reference.\n" "It can be Gerber, Excellon or Geometry." msgstr "" #: appPlugins/ToolPaint.py:3370 msgid "Create a Geometry Object which paints the polygons." msgstr "" #: appPlugins/ToolPanelize.py:112 appPlugins/ToolPanelize.py:1136 msgid "Panelization" msgstr "" #: appPlugins/ToolPanelize.py:365 msgid "Columns or Rows are zero value. Change them to a positive integer." msgstr "" #: appPlugins/ToolPanelize.py:408 msgid "Generating panel ... " msgstr "" #: appPlugins/ToolPanelize.py:503 appPlugins/ToolPanelize.py:816 #: appPlugins/ToolPanelize.py:1088 tclCommands/TclCommandPanelize.py:292 msgid "Generating panel ... Adding the source code." msgstr "" #: appPlugins/ToolPanelize.py:744 msgid "Optimizing the overlapping paths." msgstr "" #: appPlugins/ToolPanelize.py:776 msgid "Optimization complete." msgstr "" #: appPlugins/ToolPanelize.py:1097 msgid "Generating panel... Spawning copies" msgstr "" #: appPlugins/ToolPanelize.py:1113 #, python-brace-format msgid "{text} Too big for the constrain area. Final panel has {col} columns and {row} rows" msgstr "" #: appPlugins/ToolPanelize.py:1121 msgid "Panel created successfully." msgstr "" #: appPlugins/ToolPanelize.py:1181 msgid "" "Specify the type of object to be panelized\n" "It can be of type: Gerber, Excellon or Geometry.\n" "The selection here decide the type of objects that will be\n" "in the Object combobox." msgstr "" #: appPlugins/ToolPanelize.py:1214 msgid "" "Object to be panelized. This means that it will\n" "be duplicated in an array of rows and columns." msgstr "" #: appPlugins/ToolPanelize.py:1226 msgid "" "Choose the reference for panelization:\n" "- Object = the bounding box of a different object\n" "- Bounding Box = the bounding box of the object to be panelized\n" "\n" "The reference is useful when doing panelization for more than one\n" "object. The spacings (really offsets) will be applied in reference\n" "to this reference object therefore maintaining the panelized\n" "objects in sync." msgstr "" #: appPlugins/ToolPanelize.py:1259 msgid "" "Specify the type of object to be used as an container for\n" "panelization. It can be: Gerber or Geometry type.\n" "The selection here decide the type of objects that will be\n" "in the Box Object combobox." msgstr "" #: appPlugins/ToolPanelize.py:1274 msgid "" "The actual object that is used as container for the\n" " selected object that is to be panelized." msgstr "" #: appPlugins/ToolPanelize.py:1282 msgid "Panel Data" msgstr "" #: appPlugins/ToolPanelize.py:1284 msgid "" "This informations will shape the resulting panel.\n" "The number of rows and columns will set how many\n" "duplicates of the original geometry will be generated.\n" "\n" "The spacings will set the distance between any two\n" "elements of the panel array." msgstr "" #: appPlugins/ToolPanelize.py:1383 msgid "Constrain panel within" msgstr "" #: appPlugins/ToolPanelize.py:1430 msgid "Panelize Object" msgstr "" #: appPlugins/ToolPanelize.py:1433 appPlugins/ToolRulesCheck.py:1776 msgid "" "Panelize the specified object around the specified box.\n" "In other words it creates multiple copies of the source object,\n" "arranged in a 2D array of rows and columns." msgstr "" #: appPlugins/ToolPcbWizard.py:113 appPlugins/ToolPcbWizard.py:397 msgid "PcbWizard Import" msgstr "" #: appPlugins/ToolPcbWizard.py:214 appPlugins/ToolPcbWizard.py:218 msgid "Load PcbWizard Excellon file" msgstr "" #: appPlugins/ToolPcbWizard.py:237 appPlugins/ToolPcbWizard.py:241 msgid "Load PcbWizard INF file" msgstr "" #: appPlugins/ToolPcbWizard.py:289 msgid "" "The INF file does not contain the tool table.\n" "Try to open the Excellon file from File -> Open -> Excellon\n" "and edit the drill diameters manually." msgstr "" #: appPlugins/ToolPcbWizard.py:309 msgid "PcbWizard .INF file loaded." msgstr "" #: appPlugins/ToolPcbWizard.py:313 msgid "Main PcbWizard Excellon file loaded." msgstr "" #: appPlugins/ToolPcbWizard.py:346 appMain.py:11539 msgid "This is not Excellon file." msgstr "" #: appPlugins/ToolPcbWizard.py:349 msgid "Cannot parse file" msgstr "" #: appPlugins/ToolPcbWizard.py:380 msgid "Import Excellon file failed." msgstr "" #: appPlugins/ToolPcbWizard.py:387 msgid "Imported" msgstr "" #: appPlugins/ToolPcbWizard.py:390 msgid "Excellon merging is in progress. Please wait..." msgstr "" #: appPlugins/ToolPcbWizard.py:392 msgid "The imported Excellon file is empty." msgstr "" #: appPlugins/ToolPcbWizard.py:416 msgid "Load files" msgstr "" #: appPlugins/ToolPcbWizard.py:422 msgid "Excellon file" msgstr "" #: appPlugins/ToolPcbWizard.py:424 msgid "" "Load the Excellon file.\n" "Usually it has a .DRL extension" msgstr "" #: appPlugins/ToolPcbWizard.py:431 msgid "INF file" msgstr "" #: appPlugins/ToolPcbWizard.py:433 msgid "Load the INF file." msgstr "" #: appPlugins/ToolPcbWizard.py:446 msgid "Tool Number" msgstr "" #: appPlugins/ToolPcbWizard.py:448 msgid "Tool diameter in file units." msgstr "" #: appPlugins/ToolPcbWizard.py:463 msgid "Int. digits" msgstr "" #: appPlugins/ToolPcbWizard.py:465 msgid "The number of digits for the integral part of the coordinates." msgstr "" #: appPlugins/ToolPcbWizard.py:473 msgid "Frac. digits" msgstr "" #: appPlugins/ToolPcbWizard.py:475 msgid "The number of digits for the fractional part of the coordinates." msgstr "" #: appPlugins/ToolPcbWizard.py:483 msgid "No Suppression" msgstr "" #: appPlugins/ToolPcbWizard.py:484 msgid "Zeros supp." msgstr "" #: appPlugins/ToolPcbWizard.py:486 msgid "" "The type of zeros suppression used.\n" "Can be of type:\n" "- LZ = leading zeros are kept\n" "- TZ = trailing zeros are kept\n" "- No Suppression = no zero suppression" msgstr "" #: appPlugins/ToolPcbWizard.py:500 msgid "" "The type of units that the coordinates and tool\n" "diameters are using. Can be INCH or MM." msgstr "" #: appPlugins/ToolPcbWizard.py:508 msgid "Import Excellon" msgstr "" #: appPlugins/ToolPcbWizard.py:510 msgid "" "Import an Excellon file\n" "that store it's information's in 2 files.\n" "One usually has .DRL extension while\n" "the other has .INF extension." msgstr "" #: appPlugins/ToolPunchGerber.py:158 msgid "Punch Geber" msgstr "" #: appPlugins/ToolPunchGerber.py:552 msgid "Click on a pad to select it." msgstr "" #: appPlugins/ToolPunchGerber.py:801 appPlugins/ToolPunchGerber.py:934 msgid "The value of the fixed diameter is 0.0. Aborting." msgstr "" #: appPlugins/ToolPunchGerber.py:1710 msgid "Added pad" msgstr "" #: appPlugins/ToolPunchGerber.py:1711 msgid "Click to add next pad or right click to start." msgstr "" #: appPlugins/ToolPunchGerber.py:1723 msgid "Removed pad" msgstr "" #: appPlugins/ToolPunchGerber.py:1724 msgid "Click to add/remove next pad or right click to start." msgstr "" #: appPlugins/ToolPunchGerber.py:1729 msgid "No pad detected under click position." msgstr "" #: appPlugins/ToolPunchGerber.py:1931 msgid "All selectable pads are selected." msgstr "" #: appPlugins/ToolPunchGerber.py:1948 msgid "Selection cleared." msgstr "" #: appPlugins/ToolPunchGerber.py:2018 msgid "Gerber into which to punch holes" msgstr "" #: appPlugins/ToolPunchGerber.py:2165 msgid "Remove the geometry of Excellon from the Gerber to create the holes in pads." msgstr "" #: appPlugins/ToolPunchGerber.py:2320 msgid "" "When the manual type is chosen, the pads to be punched\n" "are selected on the canvas but only those that\n" "are in the processed pads." msgstr "" #: appPlugins/ToolPunchGerber.py:2354 msgid "" "Create a Gerber object from the selected object, within\n" "the specified box." msgstr "" #: appPlugins/ToolQRCode.py:233 appPlugins/ToolQRCode.py:573 appPlugins/ToolQRCode.py:624 msgid "Cancelled. There is no QRCode Data in the text box." msgstr "" #: appPlugins/ToolQRCode.py:410 msgid "QRCode Tool done." msgstr "" #: appPlugins/ToolQRCode.py:775 msgid "Gerber Object to which the QRCode will be added." msgstr "" #: appPlugins/ToolQRCode.py:815 msgid "The parameters used to shape the QRCode." msgstr "" #: appPlugins/ToolQRCode.py:925 msgid "Export QRCode" msgstr "" #: appPlugins/ToolQRCode.py:927 msgid "" "Show a set of controls allowing to export the QRCode\n" "to a SVG file or an PNG file." msgstr "" #: appPlugins/ToolQRCode.py:963 msgid "Transparent back color" msgstr "" #: appPlugins/ToolQRCode.py:988 msgid "Export QRCode SVG" msgstr "" #: appPlugins/ToolQRCode.py:990 msgid "Export a SVG file with the QRCode content." msgstr "" #: appPlugins/ToolQRCode.py:1001 msgid "Export QRCode PNG" msgstr "" #: appPlugins/ToolQRCode.py:1003 msgid "Export a PNG image file with the QRCode content." msgstr "" #: appPlugins/ToolQRCode.py:1014 msgid "Insert QRCode" msgstr "" #: appPlugins/ToolQRCode.py:1017 msgid "Create the QRCode object." msgstr "" #: appPlugins/ToolReport.py:31 appPlugins/ToolReport.py:161 msgid "Object Report" msgstr "" #: appPlugins/ToolReport.py:156 msgid "Object Properties are displayed." msgstr "" #: appPlugins/ToolReport.py:178 msgid "TYPE" msgstr "" #: appPlugins/ToolReport.py:179 msgid "NAME" msgstr "" #: appPlugins/ToolReport.py:209 msgid "Geo Type" msgstr "" #: appPlugins/ToolReport.py:212 msgid "Single-Geo" msgstr "" #: appPlugins/ToolReport.py:213 msgid "Multi-Geo" msgstr "" #: appPlugins/ToolReport.py:368 appPlugins/ToolReport.py:373 appPlugins/ToolReport.py:375 msgid "Metric" msgstr "" #: appPlugins/ToolRulesCheck.py:119 appPlugins/ToolRulesCheck.py:1177 msgid "Check Rules" msgstr "" #: appPlugins/ToolRulesCheck.py:692 appPlugins/ToolRulesCheck.py:752 #: appPlugins/ToolRulesCheck.py:789 appPlugins/ToolRulesCheck.py:861 #: appPlugins/ToolRulesCheck.py:915 appPlugins/ToolRulesCheck.py:953 #: appPlugins/ToolRulesCheck.py:1018 msgid "Value is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:706 msgid "TOP -> Copper to Copper clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:717 msgid "BOTTOM -> Copper to Copper clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:722 appPlugins/ToolRulesCheck.py:816 #: appPlugins/ToolRulesCheck.py:980 msgid "At least one Gerber object has to be selected for this rule but none is selected." msgstr "" #: appPlugins/ToolRulesCheck.py:758 msgid "One of the copper Gerber objects or the Outline Gerber object is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:771 appPlugins/ToolRulesCheck.py:935 msgid "Outline Gerber object presence is mandatory for this rule but it is not selected." msgstr "" #: appPlugins/ToolRulesCheck.py:788 appPlugins/ToolRulesCheck.py:815 msgid "Silk to Silk clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:801 msgid "TOP -> Silk to Silk clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:811 msgid "BOTTOM -> Silk to Silk clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:867 msgid "One or more of the Gerber objects is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:875 msgid "TOP -> Silk to Solder Mask Clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:881 msgid "BOTTOM -> Silk to Solder Mask Clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:885 msgid "Both Silk and Solder Mask Gerber objects has to be either both Top or both Bottom." msgstr "" #: appPlugins/ToolRulesCheck.py:921 msgid "One of the Silk Gerber objects or the Outline Gerber object is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:965 msgid "TOP -> Minimum Solder Mask Sliver" msgstr "" #: appPlugins/ToolRulesCheck.py:975 msgid "BOTTOM -> Minimum Solder Mask Sliver" msgstr "" #: appPlugins/ToolRulesCheck.py:1024 msgid "One of the Copper Gerber objects or the Excellon objects is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:1040 msgid "Excellon object presence is mandatory for this rule but none is selected." msgstr "" #: appPlugins/ToolRulesCheck.py:1118 appPlugins/ToolRulesCheck.py:1131 #: appPlugins/ToolRulesCheck.py:1142 appPlugins/ToolRulesCheck.py:1155 msgid "STATUS" msgstr "" #: appPlugins/ToolRulesCheck.py:1121 appPlugins/ToolRulesCheck.py:1145 msgid "FAILED" msgstr "" #: appPlugins/ToolRulesCheck.py:1134 appPlugins/ToolRulesCheck.py:1158 msgid "PASSED" msgstr "" #: appPlugins/ToolRulesCheck.py:1135 appPlugins/ToolRulesCheck.py:1159 msgid "Violations: There are no violations for the current rule." msgstr "" #: appPlugins/ToolRulesCheck.py:1254 msgid "Top" msgstr "" #: appPlugins/ToolRulesCheck.py:1272 msgid "The Top Gerber Copper object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1288 appPlugins/ToolRulesCheck.py:1354 msgid "SM" msgstr "" #: appPlugins/ToolRulesCheck.py:1290 msgid "The Top Gerber Solder Mask object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1308 msgid "The Top Gerber Silkscreen object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1320 msgid "Bottom" msgstr "" #: appPlugins/ToolRulesCheck.py:1338 msgid "The Bottom Gerber Copper object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1356 msgid "The Bottom Gerber Solder Mask object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1374 msgid "The Bottom Gerber Silkscreen object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1403 msgid "The Gerber Outline (Cutout) object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1417 msgid "Excellon objects for which to check rules." msgstr "" #: appPlugins/ToolRulesCheck.py:1436 msgid "" "Excellon object for which to check rules.\n" "Holds the plated holes or a general Excellon file content." msgstr "" #: appPlugins/ToolRulesCheck.py:1455 msgid "" "Excellon object for which to check rules.\n" "Holds the non-plated holes." msgstr "" #: appPlugins/ToolRulesCheck.py:1773 msgid "Run Rules Check" msgstr "" #: appPlugins/ToolShell.py:59 msgid "Type a command to be executed ..." msgstr "" #: appPlugins/ToolShell.py:68 msgid "Clear the text." msgstr "" #: appPlugins/ToolShell.py:103 appPlugins/ToolShell.py:105 msgid "...processing..." msgstr "" #: appPlugins/ToolShell.py:324 msgid "FlatCAM Evo Shell" msgstr "" #: appPlugins/ToolSolderPaste.py:125 appPlugins/ToolSolderPaste.py:1196 msgid "SP Dispenser" msgstr "" #: appPlugins/ToolSolderPaste.py:522 msgid "Please enter a tool diameter to add, in Float format." msgstr "" #: appPlugins/ToolSolderPaste.py:557 msgid "New Nozzle tool added to Tool Table." msgstr "" #: appPlugins/ToolSolderPaste.py:599 msgid "Nozzle tool from Tool Table was edited." msgstr "" #: appPlugins/ToolSolderPaste.py:662 msgid "Tools deleted from Tool Table." msgstr "" #: appPlugins/ToolSolderPaste.py:716 msgid "No SolderPaste mask Gerber object loaded." msgstr "" #: appPlugins/ToolSolderPaste.py:746 msgid "No Nozzle tools in the tool table." msgstr "" #: appPlugins/ToolSolderPaste.py:899 msgid "Some or all pads have no solder due of inadequate nozzle diameters..." msgstr "" #: appPlugins/ToolSolderPaste.py:913 msgid "Generating Solder Paste dispensing geometry..." msgstr "" #: appPlugins/ToolSolderPaste.py:937 msgid "This Geometry can't be processed. NOT a solder_paste_tool geometry." msgstr "" #: appPlugins/ToolSolderPaste.py:1042 msgid "ToolSolderPaste CNCjob created" msgstr "" #: appPlugins/ToolSolderPaste.py:1073 appPlugins/ToolSolderPaste.py:1078 #: appPlugins/ToolSolderPaste.py:1130 msgid "This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object." msgstr "" #: appPlugins/ToolSolderPaste.py:1140 msgid "Export GCode ..." msgstr "" #: appPlugins/ToolSolderPaste.py:1186 msgid "Solder paste dispenser GCode file saved to" msgstr "" #: appPlugins/ToolSolderPaste.py:1224 msgid "A plugin to help dispense solder paste on the PCB pads using a CNC machine." msgstr "" #: appPlugins/ToolSolderPaste.py:1232 msgid "Gerber Solderpaste object." msgstr "" #: appPlugins/ToolSolderPaste.py:1253 msgid "" "Tools pool from which the algorithm\n" "will pick the ones used for dispensing solder paste." msgstr "" #: appPlugins/ToolSolderPaste.py:1274 msgid "" "This is the Tool Number.\n" "The solder dispensing will start with the tool with the biggest \n" "diameter, continuing until there are no more Nozzle tools.\n" "If there are no longer tools but there are still pads not covered\n" " with solder paste, the app will issue a warning message box." msgstr "" #: appPlugins/ToolSolderPaste.py:1281 msgid "" "Tool Diameter. Its value\n" "is the width of the solder paste dispensed." msgstr "" #: appPlugins/ToolSolderPaste.py:1296 msgid "" "Add a new nozzle tool to the Tool Table\n" "with the diameter specified above." msgstr "" #: appPlugins/ToolSolderPaste.py:1349 msgid "Dispense" msgstr "" #: appPlugins/ToolSolderPaste.py:1364 msgid "Z Start" msgstr "" #: appPlugins/ToolSolderPaste.py:1377 msgid "Z Action" msgstr "" #: appPlugins/ToolSolderPaste.py:1390 msgid "Z Stop" msgstr "" #: appPlugins/ToolSolderPaste.py:1596 msgid "Generate solder paste dispensing geometry." msgstr "" #: appPlugins/ToolSolderPaste.py:1614 msgid "" "Geometry Solder Paste object.\n" "The name of the object has to end in:\n" "'_solderpaste' as a protection." msgstr "" #: appPlugins/ToolSolderPaste.py:1623 msgid "CNCJob" msgstr "" #: appPlugins/ToolSolderPaste.py:1633 msgid "Generate CNCJob" msgstr "" #: appPlugins/ToolSolderPaste.py:1636 msgid "" "Generate GCode for Solder Paste dispensing\n" "on PCB pads." msgstr "" #: appPlugins/ToolSolderPaste.py:1655 msgid "" "CNCJob Solder paste object.\n" "In order to enable the GCode save section,\n" "the name of the object has to end in:\n" "'_solderpaste' as a protection." msgstr "" #: appPlugins/ToolSolderPaste.py:1664 msgid "Save GCode" msgstr "" #: appPlugins/ToolSolderPaste.py:1667 msgid "" "Save the generated GCode for Solder Paste dispensing\n" "on PCB pads, to a file." msgstr "" #: appPlugins/ToolSub.py:274 appPlugins/ToolSub.py:510 msgid "No Target object loaded." msgstr "" #: appPlugins/ToolSub.py:277 msgid "Loading geometry from Gerber objects." msgstr "" #: appPlugins/ToolSub.py:294 appPlugins/ToolSub.py:523 msgid "No Subtractor object loaded." msgstr "" #: appPlugins/ToolSub.py:308 msgid "Not possible to subtract from the same object." msgstr "" #: appPlugins/ToolSub.py:348 msgid "Finished parsing geometry for aperture" msgstr "" #: appPlugins/ToolSub.py:350 msgid "Subtraction aperture processing finished." msgstr "" #: appPlugins/ToolSub.py:483 appPlugins/ToolSub.py:677 appPlugins/ToolSub.py:759 msgid "Generating new object failed." msgstr "" #: appPlugins/ToolSub.py:487 appPlugins/ToolSub.py:682 msgid "Created" msgstr "" #: appPlugins/ToolSub.py:536 msgid "Currently, the Subtractor geometry cannot be of type Multigeo." msgstr "" #: appPlugins/ToolSub.py:576 msgid "Parsing solid_geometry ..." msgstr "" #: appPlugins/ToolSub.py:578 msgid "Parsing solid_geometry for tool" msgstr "" #: appPlugins/ToolSub.py:795 msgid "A plugin to help subtract a Gerber/Geometry object from another of the same type." msgstr "" #: appPlugins/ToolSub.py:853 msgid "" "Gerber object from which to subtract\n" "the subtractor Gerber object." msgstr "" #: appPlugins/ToolSub.py:874 appPlugins/ToolSub.py:936 msgid "Subtractor" msgstr "" #: appPlugins/ToolSub.py:876 msgid "" "Gerber object that will be subtracted\n" "from the target Gerber object." msgstr "" #: appPlugins/ToolSub.py:886 msgid "Subtract Gerber" msgstr "" #: appPlugins/ToolSub.py:889 msgid "" "Will remove the area occupied by the subtractor\n" "Gerber from the Target Gerber.\n" "Can be used to remove the overlapping silkscreen\n" "over the soldermask." msgstr "" #: appPlugins/ToolSub.py:915 msgid "GEOMETRY" msgstr "" #: appPlugins/ToolSub.py:921 msgid "" "Geometry object from which to subtract\n" "the subtractor Geometry object." msgstr "" #: appPlugins/ToolSub.py:938 msgid "" "Geometry object that will be subtracted\n" "from the target Geometry object." msgstr "" #: appPlugins/ToolSub.py:959 msgid "Subtract Geometry" msgstr "" #: appPlugins/ToolSub.py:962 msgid "" "Will remove the area occupied by the subtractor\n" "Geometry from the Target Geometry." msgstr "" #: appPlugins/ToolTransform.py:90 appPlugins/ToolTransform.py:572 msgid "Object Transform" msgstr "" #: appPlugins/ToolTransform.py:335 msgid "CNCJob objects can't be rotated." msgstr "" #: appPlugins/ToolTransform.py:369 msgid "CNCJob objects can't be mirrored/flipped." msgstr "" #: appPlugins/ToolTransform.py:400 msgid "Skew transformation can not be done for 0, 90 and 180 degrees." msgstr "" #: appPlugins/ToolTransform.py:413 msgid "CNCJob objects can't be skewed." msgstr "" #: appPlugins/ToolTransform.py:429 msgid "Skew on the" msgstr "" #: appPlugins/ToolTransform.py:429 appPlugins/ToolTransform.py:464 #: appPlugins/ToolTransform.py:501 msgid "axis done" msgstr "" #: appPlugins/ToolTransform.py:447 msgid "CNCJob objects can't be scaled." msgstr "" #: appPlugins/ToolTransform.py:464 msgid "Scale on the" msgstr "" #: appPlugins/ToolTransform.py:480 msgid "CNCJob objects can't be offset." msgstr "" #: appPlugins/ToolTransform.py:501 msgid "Offset on the" msgstr "" #: appPlugins/ToolTransform.py:517 msgid "CNCJob objects can't be buffered." msgstr "" #: appPlugins/ToolTransform.py:595 msgid "A plugin that allow geometry transformation." msgstr "" #: appPlugins/ToolTransform.py:670 msgid "" "The object used as reference.\n" "The used point is the center of it's bounding box." msgstr "" #: appProcess.py:172 msgid "processes running." msgstr "" #: appTranslation.py:112 msgid "The application will restart." msgstr "" #: appTranslation.py:113 msgid "Are you sure do you want to change the current language to" msgstr "" #: appTranslation.py:217 appMain.py:4011 msgid "" "There are files/objects modified in FlatCAM. \n" "Do you want to Save the project?" msgstr "" #: appTranslation.py:245 msgid "The language will be applied at the next application start." msgstr "" #: appTranslation.py:246 msgid "The user does not have admin rights or UAC issues." msgstr "" #: appTranslation.py:247 appTranslation.py:253 msgid "Quit" msgstr "" #: appMain.py:944 msgid "The application is initializing ..." msgstr "" #: appMain.py:968 msgid "Could not find the Language files. The App strings are missing." msgstr "" #: appMain.py:1146 msgid "" "The application is initializing ...\n" "Canvas initialization started." msgstr "" #: appMain.py:1187 msgid "" "The application is initializing ...\n" "Canvas initialization started.\n" "Canvas initialization finished in" msgstr "" #: appMain.py:1342 appMain.py:10364 msgid "New Project - Not saved" msgstr "" #: appMain.py:1671 msgid "Found old default preferences files. Please reboot the application to update." msgstr "" #: appMain.py:1738 msgid "Open Config file failed." msgstr "" #: appMain.py:1753 msgid "Open Script file failed." msgstr "" #: appMain.py:1780 msgid "Open Excellon file failed." msgstr "" #: appMain.py:1793 msgid "Open GCode file failed." msgstr "" #: appMain.py:1806 msgid "Open Gerber file failed." msgstr "" #: appMain.py:2583 appMain.py:2599 appMain.py:2642 appMain.py:2658 appMain.py:2677 msgid "The Editor could not start." msgstr "" #: appMain.py:2590 msgid "Select a Geometry, Gerber, Excellon or CNCJob Object to edit." msgstr "" #: appMain.py:2615 msgid "" "Simultaneous editing of tools geometry in a MultiGeo Geometry is not possible.\n" "Edit only one geometry at a time." msgstr "" #: appMain.py:2717 msgid "EDITOR Area" msgstr "" #: appMain.py:2720 msgid "Editor is activated ..." msgstr "" #: appMain.py:2745 msgid "Do you want to save the edited object?" msgstr "" #: appMain.py:2796 msgid "Object empty after edit." msgstr "" #: appMain.py:2801 appMain.py:2819 appMain.py:2850 appMain.py:2866 msgid "Editor exited. Editor content saved." msgstr "" #: appMain.py:2870 appMain.py:2922 msgid "Select a Gerber, Geometry, Excellon or CNCJob Object to update." msgstr "" #: appMain.py:2880 msgid "is updated, returning to App..." msgstr "" #: appMain.py:2897 msgid "Editor exited. Editor content was not saved." msgstr "" #: appMain.py:2947 msgid "Select a Gerber, Geometry, Excellon or CNCJob object to update." msgstr "" #: appMain.py:3090 appMain.py:3096 msgid "Save to file" msgstr "" #: appMain.py:3137 msgid "Exported file to" msgstr "" #: appMain.py:3174 msgid "Failed to open recent files file for writing." msgstr "" #: appMain.py:3185 msgid "Failed to open recent projects file for writing." msgstr "" #: appMain.py:3240 msgid "PCB Manufacturing files Viewer/Editor with Plugins" msgstr "" #: appMain.py:3241 msgid "Development" msgstr "" #: appMain.py:3242 msgid "DOWNLOAD" msgstr "" #: appMain.py:3243 msgid "Issue tracker" msgstr "" #: appMain.py:3247 appMain.py:3807 appMain.py:3990 msgid "Close" msgstr "" #: appMain.py:3262 msgid "Licensed under the MIT license" msgstr "" #: appMain.py:3271 msgid "" "Permission is hereby granted, free of charge, to any person obtaining a copy\n" "of this software and associated documentation files (the \"Software\"), to deal\n" "in the Software without restriction, including without limitation the rights\n" "to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n" "copies of the Software, and to permit persons to whom the Software is\n" "furnished to do so, subject to the following conditions:\n" "\n" "The above copyright notice and this permission notice shall be included in\n" "all copies or substantial portions of the Software.\n" "\n" "THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\n" "IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n" "FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n" "AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n" "LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\n" "OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n" "THE SOFTWARE." msgstr "" #: appMain.py:3293 msgid "" "Some of the icons used are from the following sources:
Icons by Freepik from www.flaticon.com
Icons " "by Icons8
Icons by oNline Web Fonts
Icons by Pixel perfect from www.flaticon.com
" msgstr "" #: appMain.py:3329 msgid "Splash" msgstr "" #: appMain.py:3335 msgid "Programmers" msgstr "" #: appMain.py:3341 msgid "Translators" msgstr "" #: appMain.py:3347 msgid "License" msgstr "" #: appMain.py:3353 msgid "Attributions" msgstr "" #: appMain.py:3583 msgid "Programmer" msgstr "" #: appMain.py:3584 msgid "Status" msgstr "" #: appMain.py:3585 appMain.py:3667 msgid "E-mail" msgstr "" #: appMain.py:3589 msgid "FlatCAM Author" msgstr "" #: appMain.py:3593 msgid "FlatCAM Evo Author/Maintainer" msgstr "" #: appMain.py:3665 msgid "Language" msgstr "" #: appMain.py:3666 msgid "Translator" msgstr "" #: appMain.py:3775 #, python-format msgid "This program is %s and free in a very wide meaning of the word." msgstr "" #: appMain.py:3776 msgid "Yet it cannot evolve without contributions." msgstr "" #: appMain.py:3777 msgid "If you want to see this application grow and become better and better" msgstr "" #: appMain.py:3778 msgid "you can contribute to the development yourself by:" msgstr "" #: appMain.py:3779 msgid "Pull Requests on the Bitbucket repository, if you are a developer" msgstr "" #: appMain.py:3781 msgid "Bug Reports by providing the steps required to reproduce the bug" msgstr "" #: appMain.py:3783 msgid "If you like what you have seen so far ..." msgstr "" #: appMain.py:3784 msgid "Donations are NOT required." msgstr "" #: appMain.py:3784 msgid "But they are welcomed" msgstr "" #: appMain.py:3815 msgid "Contribute" msgstr "" #: appMain.py:3836 msgid "Links Exchange" msgstr "" #: appMain.py:3849 appMain.py:3869 msgid "Soon ..." msgstr "" #: appMain.py:3856 msgid "How To's" msgstr "" #: appMain.py:3976 msgid "Alternative website" msgstr "" #: appMain.py:3977 msgid "" "This entry will resolve to another website if:\n" "\n" "1. FlatCAM.org website is down\n" "2. Someone forked FlatCAM project and wants to point\n" "to his own website\n" "\n" "If you can't get any informations about the application\n" "use the YouTube channel link from the Help menu." msgstr "" #: appMain.py:4335 msgid "Selected Excellon file extensions registered with FlatCAM." msgstr "" #: appMain.py:4352 msgid "Selected GCode file extensions registered with FlatCAM." msgstr "" #: appMain.py:4368 msgid "Selected Gerber file extensions registered with FlatCAM." msgstr "" #: appMain.py:4556 appMain.py:4619 appMain.py:4650 msgid "At least two objects are required for join. Objects currently selected" msgstr "" #: appMain.py:4565 msgid "" "Failed join. The Geometry objects are of different types.\n" "At least one is MultiGeo type and the other is SingleGeo type. A possibility is to " "convert from one to another and retry joining \n" "but in the case of converting from MultiGeo to SingleGeo, informations may be lost and " "the result may not be what was expected. \n" "Check the generated GCODE." msgstr "" #: appMain.py:4580 appMain.py:4591 msgid "Geometry merging finished" msgstr "" #: appMain.py:4614 msgid "Failed. Excellon joining works only on Excellon objects." msgstr "" #: appMain.py:4627 msgid "Excellon merging finished" msgstr "" #: appMain.py:4645 msgid "Failed. Gerber joining works only on Gerber objects." msgstr "" #: appMain.py:4655 msgid "Gerber merging finished" msgstr "" #: appMain.py:4675 appMain.py:4711 msgid "Failed. Select a Geometry Object and try again." msgstr "" #: appMain.py:4679 appMain.py:4715 msgid "Expected a GeometryObject, got" msgstr "" #: appMain.py:4694 msgid "A Geometry object was converted to MultiGeo type." msgstr "" #: appMain.py:4732 msgid "A Geometry object was converted to SingleGeo type." msgstr "" #: appMain.py:4968 msgid "Units cannot be changed while the editor is active." msgstr "" #: appMain.py:4977 msgid "" "Changing the units of the project\n" "will scale all objects.\n" "\n" "Do you want to continue?" msgstr "" #: appMain.py:5031 msgid "Converted units to" msgstr "" #: appMain.py:5065 msgid "Workspace enabled." msgstr "" #: appMain.py:5068 msgid "Workspace disabled." msgstr "" #: appMain.py:5090 msgid "FlatCAM log opened." msgstr "" #: appMain.py:5145 msgid "Tool adding ..." msgstr "" #: appMain.py:5146 msgid "" "Adding Tool works only when Advanced is checked.\n" "Go to Preferences -> General - Show Advanced Options." msgstr "" #: appMain.py:5236 msgid "Delete objects" msgstr "" #: appMain.py:5237 msgid "" "Are you sure you want to permanently delete\n" "the selected objects?" msgstr "" #: appMain.py:5292 msgid "Save the work in Editor and try again ..." msgstr "" #: appMain.py:5325 msgid "Object deleted" msgstr "" #: appMain.py:5338 msgid "Click to set the origin ..." msgstr "" #: appMain.py:5377 msgid "Setting Origin..." msgstr "" #: appMain.py:5398 appMain.py:5519 appMain.py:5631 msgid "Origin set" msgstr "" #: appMain.py:5418 msgid "Origin coordinates specified but incomplete." msgstr "" #: appMain.py:5465 msgid "Moving to Origin..." msgstr "" #: appMain.py:5469 appMain.py:5537 msgid "Failed. No object(s) selected..." msgstr "" #: appMain.py:5541 msgid "Quadrant 2" msgstr "" #: appMain.py:5542 msgid "Quadrant 1" msgstr "" #: appMain.py:5543 msgid "Quadrant 3" msgstr "" #: appMain.py:5544 msgid "Quadrant 4" msgstr "" #: appMain.py:5668 msgid "Jump to ..." msgstr "" #: appMain.py:5669 appMain.py:5929 msgid "Enter the coordinates in format X,Y:" msgstr "" #: appMain.py:5680 appMain.py:5939 msgid "Wrong coordinates. Enter coordinates in format: X,Y" msgstr "" #: appMain.py:5775 msgid "T Left" msgstr "" #: appMain.py:5776 msgid "T Right" msgstr "" #: appMain.py:5777 msgid "B Left" msgstr "" #: appMain.py:5778 msgid "B Right" msgstr "" #: appMain.py:5781 msgid "Locate ..." msgstr "" #: appMain.py:5928 msgid "Move to ..." msgstr "" #: appMain.py:6485 appMain.py:9385 msgid "Aborting." msgstr "" #: appMain.py:6485 msgid "The current task will be gracefully closed as soon as possible..." msgstr "" #: appMain.py:6492 msgid "The current task was gracefully closed on user request..." msgstr "" #: appMain.py:6695 msgid "Not available for Legacy 2D graphic mode." msgstr "" #: appMain.py:6797 msgid "Adding tool from DB is not allowed for this object." msgstr "" #: appMain.py:6815 msgid "Save Tools Database" msgstr "" #: appMain.py:6816 msgid "" "One or more Tools are edited.\n" "Do you want to save?" msgstr "" #: appMain.py:7045 appMain.py:7099 appMain.py:7147 msgid "Enter the Angle value:" msgstr "" #: appMain.py:7078 msgid "Rotation done." msgstr "" #: appMain.py:7080 msgid "Rotation movement was not executed." msgstr "" #: appMain.py:7129 msgid "Skew on X axis done." msgstr "" #: appMain.py:7177 msgid "Skew on Y axis done." msgstr "" #: appMain.py:7248 msgid "New Grid ..." msgstr "" #: appMain.py:7249 msgid "Enter a Grid Value:" msgstr "" #: appMain.py:7258 appMain.py:7283 msgid "Please enter a grid value with non-zero value, in Float format." msgstr "" #: appMain.py:7263 msgid "New Grid added" msgstr "" #: appMain.py:7265 msgid "Grid already exists" msgstr "" #: appMain.py:7267 msgid "Adding New Grid cancelled" msgstr "" #: appMain.py:7289 msgid "Grid Value does not exist" msgstr "" #: appMain.py:7291 msgid "Grid Value deleted" msgstr "" #: appMain.py:7293 msgid "Delete Grid value cancelled" msgstr "" #: appMain.py:7307 msgid "Name copied to clipboard ..." msgstr "" #: appMain.py:8212 appMain.py:8216 msgid "Select an Gerber or Excellon file to view it's source file." msgstr "" #: appMain.py:8219 msgid "Viewing the source code of the selected object." msgstr "" #: appMain.py:8233 msgid "Source Editor" msgstr "" #: appMain.py:8269 appMain.py:8276 msgid "There is no selected object for which to see it's source file code." msgstr "" #: appMain.py:8284 msgid "Failed to load the source code for the selected object" msgstr "" #: appMain.py:8317 msgid "Go to Line ..." msgstr "" #: appMain.py:8348 msgid "Redrawing all objects" msgstr "" #: appMain.py:8443 msgid "Failed to load recent item list." msgstr "" #: appMain.py:8450 msgid "Failed to parse recent item list." msgstr "" #: appMain.py:8460 msgid "Failed to load recent projects item list." msgstr "" #: appMain.py:8467 msgid "Failed to parse recent project item list." msgstr "" #: appMain.py:8491 msgid "Recent files list was reset." msgstr "" #: appMain.py:8505 msgid "Recent projects list was reset." msgstr "" #: appMain.py:8530 msgid "Clear Recent projects" msgstr "" #: appMain.py:8554 msgid "Clear Recent files" msgstr "" #: appMain.py:8611 msgid "FlatCAM Evo" msgstr "" #: appMain.py:8615 msgid "Release date" msgstr "" #: appMain.py:8619 msgid "Displayed" msgstr "" #: appMain.py:8631 msgid "Canvas" msgstr "" #: appMain.py:8636 msgid "Workspace active" msgstr "" #: appMain.py:8640 msgid "Workspace size" msgstr "" #: appMain.py:8644 msgid "Workspace orientation" msgstr "" #: appMain.py:8706 msgid "Failed checking for latest version. Could not connect." msgstr "" #: appMain.py:8713 msgid "Could not parse information about latest version." msgstr "" #: appMain.py:8723 msgid "The application is up to date!" msgstr "" #: appMain.py:8727 msgid "Newer Version Available" msgstr "" #: appMain.py:8729 msgid "There is a newer version available for download:" msgstr "" #: appMain.py:8759 msgid "" "OpenGL canvas initialization failed. HW or HW configuration not supported.Change the " "graphic engine to Legacy(2D) in Edit -> Preferences -> General tab.\n" "\n" msgstr "" #: appMain.py:8850 msgid "All plots disabled." msgstr "" #: appMain.py:8856 msgid "All non selected plots disabled." msgstr "" #: appMain.py:8862 msgid "All plots enabled." msgstr "" #: appMain.py:8868 msgid "All non selected plots enabled." msgstr "" #: appMain.py:8876 msgid "Selected plots enabled..." msgstr "" #: appMain.py:8884 msgid "Selected plots disabled..." msgstr "" #: appMain.py:8926 msgid "Enabling plots ..." msgstr "" #: appMain.py:8979 msgid "Disabling plots ..." msgstr "" #: appMain.py:9147 msgid "Set alpha level ..." msgstr "" #: appMain.py:9545 appMain.py:9583 appMain.py:9626 appMain.py:9690 appMain.py:10485 #: appMain.py:11788 appMain.py:11853 msgid "" "Canvas initialization started.\n" "Canvas initialization finished in" msgstr "" #: appMain.py:9548 msgid "Opening Gerber file." msgstr "" #: appMain.py:9586 msgid "Opening Excellon file." msgstr "" #: appMain.py:9629 msgid "Opening G-Code file." msgstr "" #: appMain.py:9681 appMain.py:9685 msgid "Open HPGL2" msgstr "" #: appMain.py:9693 msgid "Opening HPGL2 file." msgstr "" #: appMain.py:9715 appMain.py:9718 msgid "Open Configuration File" msgstr "" #: appMain.py:9744 msgid "Only Geometry, Gerber and CNCJob objects can be used." msgstr "" #: appMain.py:9794 msgid "Data must be a 3D array with last dimension 3 or 4" msgstr "" #: appMain.py:9800 appMain.py:9805 msgid "Export PNG Image" msgstr "" #: appMain.py:9838 appMain.py:10050 msgid "Failed. Only Gerber objects can be saved as Gerber files..." msgstr "" #: appMain.py:9851 msgid "Save Gerber source file" msgstr "" #: appMain.py:9880 msgid "Failed. Only Script objects can be saved as TCL Script files..." msgstr "" #: appMain.py:9893 msgid "Save Script source file" msgstr "" #: appMain.py:9922 msgid "Failed. Only Document objects can be saved as Document files..." msgstr "" #: appMain.py:9935 msgid "Save Document source file" msgstr "" #: appMain.py:9964 appMain.py:10005 appMain.py:11001 msgid "Failed. Only Excellon objects can be saved as Excellon files..." msgstr "" #: appMain.py:9972 appMain.py:9977 msgid "Save Excellon source file" msgstr "" #: appMain.py:10095 msgid "Only Geometry objects can be used." msgstr "" #: appMain.py:10146 appMain.py:10150 msgid "Import SVG" msgstr "" #: appMain.py:10176 appMain.py:10180 msgid "Import DXF" msgstr "" #: appMain.py:10207 msgid "" "There are files/objects opened in FlatCAM.\n" "Creating a New project will delete them.\n" "Do you want to Save the project?" msgstr "" #: appMain.py:10338 msgid "Save preferences" msgstr "" #: appMain.py:10339 msgid "Do you want to save the loaded project settings as the default settings?" msgstr "" #: appMain.py:10363 msgid "Project created in" msgstr "" #: appMain.py:10363 msgid "seconds" msgstr "" #: appMain.py:10366 msgid "New Project created" msgstr "" #: appMain.py:10394 msgid "New TCL script file created in Code Editor." msgstr "" #: appMain.py:10421 appMain.py:10423 appMain.py:10458 appMain.py:10460 msgid "Open TCL script" msgstr "" #: appMain.py:10487 msgid "Executing ScriptObject file." msgstr "" #: appMain.py:10495 appMain.py:10499 msgid "Run TCL script" msgstr "" #: appMain.py:10522 msgid "TCL script file opened in Code Editor and executed." msgstr "" #: appMain.py:10570 appMain.py:10577 msgid "Save Project As ..." msgstr "" #: appMain.py:10614 msgid "FlatCAM objects print" msgstr "" #: appMain.py:10627 appMain.py:10635 msgid "Save Object as PDF ..." msgstr "" #: appMain.py:10645 msgid "Printing PDF ..." msgstr "" #: appMain.py:10826 msgid "PDF file saved to" msgstr "" #: appMain.py:10848 appMain.py:11108 appMain.py:11242 appMain.py:11309 msgid "Exporting ..." msgstr "" #: appMain.py:10891 msgid "SVG file exported to" msgstr "" #: appMain.py:10906 appMain.py:10910 msgid "Import FlatCAM Preferences" msgstr "" #: appMain.py:10921 msgid "Imported Defaults from" msgstr "" #: appMain.py:10940 appMain.py:10946 msgid "Export FlatCAM Preferences" msgstr "" #: appMain.py:10966 msgid "Exported preferences to" msgstr "" #: appMain.py:11099 msgid "Excellon file exported to" msgstr "" #: appMain.py:11113 appMain.py:11120 appMain.py:11247 appMain.py:11254 appMain.py:11314 #: appMain.py:11321 msgid "Could not export." msgstr "" #: appMain.py:11234 msgid "Gerber file exported to" msgstr "" #: appMain.py:11300 msgid "DXF file exported to" msgstr "" #: appMain.py:11376 appMain.py:11433 msgid "Import failed." msgstr "" #: appMain.py:11467 appMain.py:11674 appMain.py:11739 msgid "Failed to open file" msgstr "" #: appMain.py:11470 appMain.py:11677 appMain.py:11742 msgid "Failed to parse file" msgstr "" #: appMain.py:11482 msgid "Object is not Gerber file or empty. Aborting object creation." msgstr "" #: appMain.py:11493 appMain.py:11563 appMain.py:11627 appMain.py:11701 appMain.py:11757 #: appMain.py:11932 tclCommands/TclCommandOpenDXF.py:90 msgid "Opening" msgstr "" #: appMain.py:11504 msgid "Open Gerber failed. Probable not a Gerber file." msgstr "" #: appMain.py:11542 msgid "Cannot open file" msgstr "" #: appMain.py:11573 msgid "Open Excellon file failed. Probable not an Excellon file." msgstr "" #: appMain.py:11609 msgid "Reading GCode file" msgstr "" #: appMain.py:11622 msgid "This is not GCODE" msgstr "" #: appMain.py:11640 msgid "" "Failed to create CNCJob Object. Probable not a GCode file. Try to load it from File " "menu.\n" " Attempting to create a FlatCAM CNCJob Object from G-Code file failed during processing" msgstr "" #: appMain.py:11696 msgid "Object is not HPGL2 file or empty. Aborting object creation." msgstr "" #: appMain.py:11708 msgid "Failed. Probable not a HPGL2 file." msgstr "" #: appMain.py:11734 msgid "TCL script file opened in Code Editor." msgstr "" #: appMain.py:11768 msgid "Failed to open TCL Script." msgstr "" #: appMain.py:11791 msgid "Opening FlatCAM Config file." msgstr "" #: appMain.py:11818 msgid "Failed to open config file" msgstr "" #: appMain.py:11850 msgid "Loading Project ... Please Wait ..." msgstr "" #: appMain.py:11856 msgid "Opening FlatCAM Project file." msgstr "" #: appMain.py:11871 appMain.py:11875 appMain.py:11893 msgid "Failed to open project file" msgstr "" #: appMain.py:11966 msgid "Loading Project ... restoring" msgstr "" #: appMain.py:11972 msgid "Project loaded from" msgstr "" #: appMain.py:12004 msgid "Saving Project ..." msgstr "" #: appMain.py:12048 appMain.py:12104 msgid "Project saved to" msgstr "" #: appMain.py:12059 msgid "The object is used by another application." msgstr "" #: appMain.py:12079 msgid "Failed to verify project file" msgstr "" #: appMain.py:12079 appMain.py:12088 appMain.py:12096 appMain.py:12109 msgid "Retry to save it." msgstr "" #: appMain.py:12086 appMain.py:12094 appMain.py:12107 msgid "Failed to parse saved project file" msgstr "" #: appMain.py:12144 msgid "Save cancelled because source file is empty. Try to export the file." msgstr "" #: assets/linux/flatcam-beta.desktop:3 msgid "FlatCAM Beta" msgstr "" #: assets/linux/flatcam-beta.desktop:8 msgid "G-Code from GERBERS" msgstr "" #: camlib.py:711 msgid "self.solid_geometry is neither BaseGeometry or list." msgstr "" #: camlib.py:1154 msgid "Pass" msgstr "" #: camlib.py:1176 msgid "Get Exteriors" msgstr "" #: camlib.py:1179 msgid "Get Interiors" msgstr "" #: camlib.py:2535 msgid "Object was rotated" msgstr "" #: camlib.py:2603 msgid "Object was skewed" msgstr "" #: camlib.py:2674 msgid "Object was buffered" msgstr "" #: camlib.py:2937 msgid "There is no such parameter" msgstr "" #: camlib.py:3152 camlib.py:3196 camlib.py:5658 camlib.py:6087 msgid "Indexing geometry before generating G-Code..." msgstr "" #: camlib.py:3229 camlib.py:4332 camlib.py:4591 msgid "" "The Cut Z parameter has positive value. It is the depth value to drill into material.\n" "The Cut Z parameter needs to have a negative value, assuming it is a typo therefore the " "app will convert the value to negative. Check the resulting CNC code (Gcode etc)." msgstr "" #: camlib.py:3236 msgid "The Cut Z parameter is zero. There will be no cut, aborting" msgstr "" #: camlib.py:3386 camlib.py:3824 msgid "The End X,Y format has to be (x, y)." msgstr "" #: camlib.py:3471 camlib.py:3918 camlib.py:4427 camlib.py:4678 camlib.py:5732 camlib.py:6169 msgid "Starting G-Code for tool with diameter" msgstr "" #: camlib.py:3598 camlib.py:4554 camlib.py:4801 camlib.py:7143 camlib.py:7420 camlib.py:7569 msgid "G91 coordinates not implemented" msgstr "" #: camlib.py:3607 msgid "Finished G-Code generation for tool:" msgstr "" #: camlib.py:3732 camlib.py:5605 camlib.py:6027 msgid "Cut_Z parameter is None or zero. Most likely a bad combinations of other parameters." msgstr "" #: camlib.py:3740 camlib.py:5613 camlib.py:6036 msgid "" "The Cut Z parameter has positive value. It is the depth value to cut into material.\n" "The Cut Z parameter needs to have a negative value, assuming it is a typo therefore the " "app will convert the value to negative.Check the resulting CNC code (Gcode etc)." msgstr "" #: camlib.py:3748 camlib.py:4342 camlib.py:4601 camlib.py:5621 camlib.py:6044 msgid "The Cut Z parameter is zero. There will be no cut, skipping file" msgstr "" #: camlib.py:3753 camlib.py:5626 camlib.py:6050 msgid "Travel Z parameter is None or zero." msgstr "" #: camlib.py:3758 camlib.py:5631 camlib.py:6056 msgid "" "The Travel Z parameter has negative value. It is the height value to travel between " "cuts.\n" "The Z Travel parameter needs to have a positive value, assuming it is a typo therefore " "the app will convert the value to positive.Check the resulting CNC code (Gcode etc)." msgstr "" #: camlib.py:3766 camlib.py:5639 camlib.py:6064 msgid "The Z Travel parameter is zero. This is dangerous, skipping file" msgstr "" #: camlib.py:4039 camlib.py:5474 camlib.py:5805 camlib.py:6250 msgid "Finished G-Code generation" msgstr "" #: camlib.py:4039 camlib.py:5805 camlib.py:6250 camlib.py:6371 msgid "paths traced" msgstr "" #: camlib.py:4098 msgid "" "The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y) \n" "but now there is only one value, not two. " msgstr "" #: camlib.py:4110 camlib.py:5568 camlib.py:5992 msgid "" "The End Move X,Y field in Edit -> Preferences has to be in the format (x, y) but now " "there is only one value, not two." msgstr "" #: camlib.py:4230 msgid "Failed. Drill points inside the exclusion zones." msgstr "" #: camlib.py:5591 msgid "" "The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y) \n" "but now there is only one value, not two." msgstr "" #: camlib.py:5860 msgid "Trying to generate a CNC Job from a Geometry object without solid_geometry." msgstr "" #: camlib.py:5911 msgid "" "The Tool Offset value is too negative to use for the current_geometry.\n" "Raise the value (in module) and try again." msgstr "" #: camlib.py:6281 msgid "There is no tool data in the SolderPaste geometry." msgstr "" #: camlib.py:6371 msgid "Finished SolderPaste G-Code generation" msgstr "" #: camlib.py:6720 msgid "Parsing GCode file. Number of lines" msgstr "" #: camlib.py:6832 msgid "Creating Geometry from the parsed GCode file. " msgstr "" #: camlib.py:6889 msgid "Parsing GCode file for tool diameter" msgstr "" #: camlib.py:6890 msgid "Number of lines" msgstr "" #: camlib.py:6979 msgid "Creating Geometry from the parsed GCode file for tool diameter" msgstr "" #: camlib.py:7738 msgid "G91 coordinates not implemented ..." msgstr "" #: defaults.py:949 defaults.py:1120 msgid "Failed to parse defaults file." msgstr "" #: tclCommands/TclCommandBbox.py:75 tclCommands/TclCommandNregions.py:74 msgid "Expected GerberObject or GeometryObject, got" msgstr "" #: tclCommands/TclCommandBounds.py:67 tclCommands/TclCommandBounds.py:71 msgid "Expected a list of objects names separated by comma. Got" msgstr "" #: tclCommands/TclCommandBounds.py:81 msgid "TclCommand Bounds done." msgstr "" #: tclCommands/TclCommandBuffer.py:97 msgid "Expected -dist " msgstr "" #: tclCommands/TclCommandCopperClear.py:276 msgid "Expected either -box or -all." msgstr "" #: tclCommands/TclCommandDrillcncjob.py:210 msgid "Tool_nr" msgstr "" #: tclCommands/TclCommandDrillcncjob.py:210 msgid "Drills_Nr" msgstr "" #: tclCommands/TclCommandDrillcncjob.py:210 msgid "Slots_Nr" msgstr "" #: tclCommands/TclCommandGeoCutout.py:142 msgid "The name of the object for which cutout is done is missing. Add it and retry." msgstr "" #: tclCommands/TclCommandGeoCutout.py:186 msgid "Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 or 8." msgstr "" #: tclCommands/TclCommandGeoCutout.py:217 msgid "Cancelled. Object type is not supported." msgstr "" #: tclCommands/TclCommandHelp.py:75 msgid "Available commands:" msgstr "" #: tclCommands/TclCommandHelp.py:115 msgid "Type help for usage." msgstr "" #: tclCommands/TclCommandHelp.py:115 msgid "Example: help open_gerber" msgstr "" #: tclCommands/TclCommandPaint.py:231 tclCommands/TclCommandPaint.py:238 msgid "Expected a tuple value like -single 3.2,0.1." msgstr "" #: tclCommands/TclCommandPaint.py:263 tclCommands/TclCommandPaint.py:264 msgid "Expected -box ." msgstr "" #: tclCommands/TclCommandPaint.py:288 msgid "" "None of the following args: 'box', 'single', 'all' were used.\n" "Paint failed." msgstr "" #: tclCommands/TclCommandScale.py:137 tclCommands/TclCommandSkew.py:189 msgid "" "Expected -origin or -origin or -origin
or - origin 3.0,4.2." msgstr "" #: tclCommands/TclCommandSetOrigin.py:95 msgid "Expected a pair of (x, y) coordinates. Got" msgstr "" #: tclCommands/TclCommandSetOrigin.py:120 msgid "Origin set by offsetting all loaded objects with " msgstr "" #: tclCommands/TclCommandSubtractRectangle.py:62 msgid "No Geometry name in args. Provide a name and try again." msgstr "" #~ msgid "" #~ "How much (fraction) of the tool width to overlap each tool pass.\n" #~ "Example:\n" #~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n" #~ "\n" #~ "Adjust the value starting with lower values\n" #~ "and increasing it if areas that should be painted are still \n" #~ "not painted.\n" #~ "Lower values = faster processing, faster execution on PCB.\n" #~ "Higher values = slow processing and slow execution on CNC\n" #~ "due of too many paths." #~ msgstr "" #~ "How much (fraction) of the tool width to overlap each tool pass.\n" #~ "Example:\n" #~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n" #~ "\n" #~ "Adjust the value starting with lower values\n" #~ "and increasing it if areas that should be painted are still \n" #~ "not painted.\n" #~ "Lower values = faster processing, faster execution on PCB.\n" #~ "Higher values = slow processing and slow execution on CNC\n" #~ "due of too many paths." #~| msgid "z_toolchange = Z coord for Toolchange" #~ msgid "z_cut = Z coord for Toolchange" #~ msgstr "z_cut = Z coord for Toolchange" #~| msgid "z_toolchange = Z coord for Toolchange" #~ msgid "z_move = Z coord for Toolchange" #~ msgstr "z_move = Z coord for Toolchange" #~ msgid "%s/Project_%s" #~ msgstr "%s/Project_%s" #~ msgid "plugin_tab" #~ msgstr "plugin_tab"