# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR ORGANIZATION # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: \n" "POT-Creation-Date: 2022-04-30 18:39+0300\n" "PO-Revision-Date: 2019-03-25 15:08+0200\n" "Last-Translator: \n" "Language-Team: \n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "Generated-By: pygettext.py 1.5\n" "X-Generator: Poedit 3.0.1\n" "X-Poedit-Basepath: ..\n" "X-Poedit-SearchPath-0: .\n" "X-Poedit-SearchPathExcluded-0: build\n" "X-Poedit-SearchPathExcluded-1: doc\n" "X-Poedit-SearchPathExcluded-2: tests\n" "X-Poedit-SearchPathExcluded-3: venv\n" #: Bookmark.py:57 Bookmark.py:84 msgid "Title" msgstr "" #: Bookmark.py:58 Bookmark.py:89 msgid "Web Link" msgstr "" #: Bookmark.py:62 msgid "" "Index.\n" "The rows in gray color will populate the Bookmarks menu.\n" "The number of gray colored rows is set in Preferences." msgstr "" #: Bookmark.py:66 msgid "" "Description of the link that is set as an menu action.\n" "Try to keep it short because it is installed as a menu item." msgstr "" #: Bookmark.py:69 msgid "Web Link. E.g: https://your_website.org " msgstr "" #: Bookmark.py:78 msgid "New Bookmark" msgstr "" #: Bookmark.py:99 msgid "Add Entry" msgstr "" #: Bookmark.py:100 msgid "Remove Entry" msgstr "" #: Bookmark.py:101 msgid "Export List" msgstr "" #: Bookmark.py:102 msgid "Import List" msgstr "" #: Bookmark.py:192 msgid "Title entry is empty." msgstr "" #: Bookmark.py:201 msgid "Web link entry is empty." msgstr "" #: Bookmark.py:209 msgid "Either the Title or the Weblink already in the table." msgstr "" #: Bookmark.py:229 msgid "Bookmark added." msgstr "" #: Bookmark.py:245 appMain.py:3906 appMain.py:3948 msgid "Backup Site" msgstr "" #: Bookmark.py:246 msgid "This bookmark can not be removed" msgstr "" #: Bookmark.py:277 msgid "Bookmark removed." msgstr "" #: Bookmark.py:293 msgid "Export Bookmarks" msgstr "" #: Bookmark.py:295 appGUI/MainGUI.py:656 msgid "Bookmarks" msgstr "" #: Bookmark.py:302 Bookmark.py:344 appDatabase.py:2136 appDatabase.py:2182 #: appEditors/AppExcEditor.py:2073 appEditors/AppExcEditor.py:2141 #: appEditors/AppExcEditor.py:2163 appEditors/AppGeoEditor.py:2737 #: appEditors/AppGeoEditor.py:2763 appEditors/AppGeoEditor.py:2789 #: appEditors/AppGeoEditor.py:4661 appEditors/AppGerberEditor.py:5040 #: appEditors/AppGerberEditor.py:7264 appEditors/AppTextEditor.py:279 #: appEditors/geo_plugins/GeoPaintPlugin.py:103 #: appEditors/geo_plugins/GeoTransformationPlugin.py:130 appGUI/MainGUI.py:3567 #: appGUI/MainGUI.py:3799 appGUI/MainGUI.py:4032 appGUI/MainGUI.py:4293 appMain.py:1732 #: appMain.py:3105 appMain.py:5052 appMain.py:5472 appMain.py:9582 appMain.py:9620 #: appMain.py:9663 appMain.py:9688 appMain.py:9727 appMain.py:9751 appMain.py:9802 #: appMain.py:9840 appMain.py:9886 appMain.py:9928 appMain.py:9970 appMain.py:10011 #: appMain.py:10053 appMain.py:10098 appMain.py:10156 appMain.py:10188 appMain.py:10218 #: appMain.py:10440 appMain.py:10477 appMain.py:10520 appMain.py:10596 appMain.py:10655 #: appMain.py:10936 appMain.py:10971 appObjects/ObjectCollection.py:155 #: appPlugins/ToolCutOut.py:2045 appPlugins/ToolDistance.py:618 appPlugins/ToolFilm.py:411 #: appPlugins/ToolFilm.py:561 appPlugins/ToolImage.py:180 appPlugins/ToolImage.py:206 #: appPlugins/ToolLevelling.py:1572 appPlugins/ToolMarkers.py:802 #: appPlugins/ToolMarkers.py:911 appPlugins/ToolMove.py:277 appPlugins/ToolNCC.py:1192 #: appPlugins/ToolNCC.py:1271 appPlugins/ToolNCC.py:1329 appPlugins/ToolNCC.py:3965 #: appPlugins/ToolPaint.py:837 appPlugins/ToolPaint.py:923 appPlugins/ToolPaint.py:983 #: appPlugins/ToolPaint.py:2848 appPlugins/ToolPcbWizard.py:213 #: appPlugins/ToolPcbWizard.py:236 appPlugins/ToolQRCode.py:604 appPlugins/ToolQRCode.py:653 #: appPlugins/ToolSolderPaste.py:584 appPlugins/ToolSolderPaste.py:922 #: appPlugins/ToolSolderPaste.py:978 msgid "Cancelled." msgstr "" #: Bookmark.py:310 appDatabase.py:2144 appEditors/AppTextEditor.py:334 appMain.py:3113 #: appMain.py:10906 appMain.py:11114 appMain.py:11249 appMain.py:11315 appMain.py:12371 #: appObjects/CNCJobObject.py:762 appObjects/CNCJobObject.py:1184 appPlugins/ToolFilm.py:973 #: appPlugins/ToolLevelling.py:1494 appPlugins/ToolLevelling.py:1686 #: appPlugins/ToolSolderPaste.py:1212 msgid "" "Permission denied, saving not possible.\n" "Most likely another app is holding the file open and not accessible." msgstr "" #: Bookmark.py:321 Bookmark.py:351 appDatabase.py:1735 appDatabase.py:2155 #: appDatabase.py:2189 appMain.py:3124 appMain.py:6649 appPlugins/ToolNCC.py:1202 #: appPlugins/ToolPaint.py:847 defaults.py:941 defaults.py:1112 msgid "Could not load the file." msgstr "" #: Bookmark.py:331 msgid "Failed to write bookmarks to file." msgstr "" #: Bookmark.py:333 msgid "Exported bookmarks to" msgstr "" #: Bookmark.py:339 msgid "Import Bookmarks" msgstr "" #: Bookmark.py:358 msgid "Imported Bookmarks from" msgstr "" #: appCommon/Common.py:49 msgid "The user requested a graceful exit of the current task." msgstr "" #: appCommon/Common.py:302 appPlugins/ToolCopperThieving.py:378 appPlugins/ToolFollow.py:213 #: appPlugins/ToolIsolation.py:1662 appPlugins/ToolNCC.py:1572 appPlugins/ToolPaint.py:1197 msgid "Click the start point of the area." msgstr "" #: appCommon/Common.py:361 appPlugins/ToolFollow.py:422 appPlugins/ToolNCC.py:1633 #: appPlugins/ToolPaint.py:1347 msgid "Click the end point of the area." msgstr "" #: appCommon/Common.py:367 appCommon/Common.py:471 appPlugins/ToolCopperThieving.py:422 #: appPlugins/ToolFollow.py:428 appPlugins/ToolFollow.py:479 #: appPlugins/ToolIsolation.py:2733 appPlugins/ToolIsolation.py:2785 #: appPlugins/ToolNCC.py:1637 appPlugins/ToolNCC.py:1689 appPlugins/ToolPaint.py:1353 #: appPlugins/ToolPaint.py:1404 msgid "Zone added. Click to start adding next zone or right click to finish." msgstr "" #: appCommon/Common.py:415 appEditors/AppGeoEditor.py:1209 appEditors/AppGeoEditor.py:1358 #: appEditors/AppGeoEditor.py:1420 appEditors/AppGeoEditor.py:1571 #: appEditors/AppGerberEditor.py:1029 appEditors/AppGerberEditor.py:1409 #: appPlugins/ToolFollow.py:450 appPlugins/ToolIsolation.py:2756 appPlugins/ToolNCC.py:1660 #: appPlugins/ToolPaint.py:1375 msgid "Click on next Point or click right mouse button to complete ..." msgstr "" #: appCommon/Common.py:502 msgid "Exclusion areas added. Checking overlap with the object geometry ..." msgstr "" #: appCommon/Common.py:508 msgid "Failed. Exclusion areas intersects the object geometry ..." msgstr "" #: appCommon/Common.py:511 msgid "Exclusion areas added." msgstr "" #: appCommon/Common.py:520 appCommon/Common.py:655 appCommon/Common.py:717 msgid "Generate the CNC Job object." msgstr "" #: appCommon/Common.py:520 msgid "With Exclusion areas." msgstr "" #: appCommon/Common.py:555 msgid "Cancelled. Area exclusion drawing was interrupted." msgstr "" #: appCommon/Common.py:665 appCommon/Common.py:720 msgid "All exclusion zones deleted." msgstr "" #: appCommon/Common.py:706 msgid "Selected exclusion zones deleted." msgstr "" #: appDatabase.py:28 appEditors/AppGeoEditor.py:118 appEditors/AppGeoEditor.py:1398 #: appEditors/AppGeoEditor.py:1402 appEditors/AppGeoEditor.py:1438 #: appEditors/AppGeoEditor.py:1774 appGUI/MainGUI.py:1813 appPlugins/ToolMilling.py:4334 msgid "Path" msgstr "" #: appDatabase.py:28 appPlugins/ToolMilling.py:4334 msgid "In" msgstr "" #: appDatabase.py:28 appPlugins/ToolMilling.py:4334 msgid "Out" msgstr "" #: appDatabase.py:28 appGUI/MainGUI.py:930 appGUI/MainGUI.py:1798 appMain.py:9132 #: appPlugins/ToolMilling.py:4334 appPlugins/ToolMilling.py:4342 msgid "Custom" msgstr "" #: appDatabase.py:29 appEditors/appGCodeEditor.py:192 appObjects/CNCJobObject.py:264 #: appObjects/GeometryObject.py:125 appPlugins/ToolMilling.py:4446 msgid "Roughing" msgstr "" #: appDatabase.py:29 appEditors/appGCodeEditor.py:192 appObjects/CNCJobObject.py:264 #: appObjects/GeometryObject.py:125 appPlugins/ToolMilling.py:4446 msgid "Finishing" msgstr "" #: appDatabase.py:29 appDatabase.py:271 appDatabase.py:593 appDatabase.py:1768 #: appDatabase.py:2233 appDatabase.py:2416 appEditors/appGCodeEditor.py:192 #: appGUI/MainGUI.py:1154 appGUI/MainGUI.py:2531 appGUI/MainGUI.py:5044 #: appObjects/CNCJobObject.py:264 appObjects/GeometryObject.py:125 #: appPlugins/ToolIsolation.py:191 appPlugins/ToolIsolation.py:3346 #: appPlugins/ToolMilling.py:4446 appPlugins/ToolNCC.py:4297 msgid "Isolation" msgstr "" #: appDatabase.py:29 appEditors/appGCodeEditor.py:192 appObjects/CNCJobObject.py:264 #: appObjects/GeometryObject.py:125 appPlugins/ToolMilling.py:4446 msgid "Polishing" msgstr "" #: appDatabase.py:38 appGUI/preferences/gerber/GerberGenPrefGroupUI.py:378 msgid "ID" msgstr "" #: appDatabase.py:38 appDatabase.py:203 appEditors/AppGeoEditor.py:3126 #: appGUI/ObjectUI.py:222 appGUI/ObjectUI.py:641 appGUI/ObjectUI.py:973 #: appGUI/ObjectUI.py:1322 appGUI/ObjectUI.py:1605 appGUI/ObjectUI.py:1672 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:376 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:379 appMain.py:8639 #: appPlugins/ToolFiducials.py:972 msgid "Name" msgstr "" #: appDatabase.py:38 appDatabase.py:265 appPlugins/ToolDblSided.py:735 #: appPlugins/ToolPanelize.py:1180 appPlugins/ToolSub.py:840 appPlugins/ToolSub.py:908 msgid "Target" msgstr "" #: appDatabase.py:38 appDatabase.py:216 appEditors/AppExcEditor.py:3591 #: appEditors/AppExcEditor.py:4761 appGUI/ObjectUI.py:741 #: appObjects/AppObjectTemplate.py:781 appObjects/AppObjectTemplate.py:847 #: appPlugins/ToolDrilling.py:2450 appPlugins/ToolIsolation.py:3436 #: appPlugins/ToolMilling.py:4032 appPlugins/ToolNCC.py:4134 appPlugins/ToolPaint.py:3018 #: appPlugins/ToolPcbWizard.py:432 appPlugins/ToolReport.py:430 appPlugins/ToolReport.py:499 #: appPlugins/ToolSolderPaste.py:1302 tclCommands/TclCommandDrillcncjob.py:210 msgid "Diameter" msgstr "" #: appDatabase.py:77 msgid "Tool Description" msgstr "" #: appDatabase.py:92 msgid "Milling Parameters" msgstr "" #: appDatabase.py:105 msgid "NCC Parameters" msgstr "" #: appDatabase.py:118 msgid "Paint Parameters" msgstr "" #: appDatabase.py:131 msgid "Isolation Parameters" msgstr "" #: appDatabase.py:144 msgid "Drilling Parameters" msgstr "" #: appDatabase.py:157 msgid "Cutout Parameters" msgstr "" #: appDatabase.py:205 msgid "" "Tool name.\n" "This is not used in the app, it's function\n" "is to serve as a note for the user." msgstr "" #: appDatabase.py:218 appDatabase.py:1181 appEditors/exc_plugins/ExcDrillArrayPlugin.py:120 #: appEditors/exc_plugins/ExcDrillPlugin.py:127 #: appEditors/exc_plugins/ExcResizePlugin.py:119 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:118 #: appEditors/exc_plugins/ExcSlotPlugin.py:127 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:206 appPlugins/ToolCalculators.py:644 msgid "Tool Diameter" msgstr "" #: appDatabase.py:229 msgid "Diameter Tolerance" msgstr "" #: appDatabase.py:231 msgid "" "Tool tolerance. This tool will be used if the desired tool diameter\n" "is within the tolerance specified here." msgstr "" #: appDatabase.py:237 msgid "Min" msgstr "" #: appDatabase.py:239 msgid "Set the tool tolerance minimum." msgstr "" #: appDatabase.py:251 msgid "Max" msgstr "" #: appDatabase.py:253 msgid "Set the tool tolerance maximum." msgstr "" #: appDatabase.py:267 msgid "The kind of Application Tool where this tool is to be used." msgstr "" #: appDatabase.py:271 appDatabase.py:1765 appDatabase.py:1806 appDatabase.py:2217 #: appDatabase.py:2413 appGUI/MainGUI.py:1554 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:20 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:23 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:22 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:23 appMain.py:8637 msgid "General" msgstr "" #: appDatabase.py:271 appDatabase.py:1766 appDatabase.py:2220 appDatabase.py:2414 #: appGUI/MainGUI.py:1145 appGUI/MainGUI.py:2522 appGUI/MainGUI.py:5048 #: appGUI/ObjectUI.py:804 appGUI/ObjectUI.py:1116 appPlugins/ToolMilling.py:76 #: appPlugins/ToolMilling.py:217 appPlugins/ToolMilling.py:3902 msgid "Milling" msgstr "" #: appDatabase.py:271 appDatabase.py:1767 appDatabase.py:2225 appDatabase.py:2415 #: appGUI/MainGUI.py:1143 appGUI/MainGUI.py:2520 appGUI/ObjectUI.py:790 #: appPlugins/ToolDrilling.py:33 appPlugins/ToolDrilling.py:176 #: appPlugins/ToolDrilling.py:1176 appPlugins/ToolDrilling.py:2355 msgid "Drilling" msgstr "" #: appDatabase.py:271 appDatabase.py:1769 appDatabase.py:2241 appDatabase.py:2417 #: appEditors/geo_plugins/GeoPaintPlugin.py:220 appEditors/geo_plugins/GeoPaintPlugin.py:332 #: appGUI/MainGUI.py:768 appGUI/MainGUI.py:1160 appGUI/MainGUI.py:1832 #: appGUI/MainGUI.py:2537 appGUI/ObjectUI.py:1130 appPlugins/ToolPaint.py:195 #: appPlugins/ToolPaint.py:879 appPlugins/ToolPaint.py:2900 msgid "Paint" msgstr "" #: appDatabase.py:271 appDatabase.py:1770 appDatabase.py:2249 appDatabase.py:2418 #: appGUI/MainGUI.py:1158 appGUI/MainGUI.py:2535 appGUI/ObjectUI.py:429 #: appGUI/ObjectUI.py:1140 appPlugins/ToolNCC.py:195 appPlugins/ToolNCC.py:1228 #: appPlugins/ToolNCC.py:4015 msgid "NCC" msgstr "" #: appDatabase.py:271 appDatabase.py:1771 appDatabase.py:2257 appDatabase.py:2419 #: appGUI/MainGUI.py:1165 appGUI/MainGUI.py:2542 appGUI/ObjectUI.py:400 #: appPlugins/ToolCutOut.py:170 appPlugins/ToolCutOut.py:466 appPlugins/ToolCutOut.py:2212 msgid "Cutout" msgstr "" #: appDatabase.py:285 appEditors/appGCodeEditor.py:812 appGUI/ObjectUI.py:1068 #: appGUI/ObjectUI.py:1490 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:444 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:148 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:330 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:464 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:321 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:285 appPlugins/ToolCutOut.py:2592 #: appPlugins/ToolFollow.py:741 appPlugins/ToolIsolation.py:3587 #: appPlugins/ToolIsolation.py:3955 appPlugins/ToolMilling.py:4404 #: appPlugins/ToolNCC.py:4134 appPlugins/ToolNCC.py:4570 appPlugins/ToolPaint.py:3018 #: appPlugins/ToolPaint.py:3329 msgid "Shape" msgstr "" #: appDatabase.py:287 appGUI/ObjectUI.py:1092 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:150 appPlugins/ToolIsolation.py:3589 #: appPlugins/ToolMilling.py:4406 appPlugins/ToolNCC.py:4152 appPlugins/ToolPaint.py:3036 msgid "" "Tool Shape. \n" "Can be:\n" "C1 ... C4 = circular tool with x flutes\n" "B = ball tip milling tool\n" "V = v-shape milling tool\n" "L = laser" msgstr "" #: appDatabase.py:303 msgid "V-Dia" msgstr "" #: appDatabase.py:305 msgid "" "V-Dia.\n" "Diameter of the tip for V-Shape Tools." msgstr "" #: appDatabase.py:317 msgid "V-Angle" msgstr "" #: appDatabase.py:319 msgid "" "V-Agle.\n" "Angle at the tip for the V-Shape Tools." msgstr "" #: appDatabase.py:336 appEditors/appGCodeEditor.py:812 appGUI/ObjectUI.py:1068 #: appGUI/ObjectUI.py:1490 appPlugins/ToolMilling.py:4434 msgid "Job" msgstr "" #: appDatabase.py:339 appPlugins/ToolMilling.py:4437 msgid "" "- Isolation -> informative - lower Feedrate as it uses a milling bit with a fine tip.\n" "- Roughing -> informative - lower Feedrate and multiDepth cut.\n" "- Finishing -> informative - higher Feedrate, without multiDepth.\n" "- Polish -> adds a painting sequence over the whole area of the object" msgstr "" #: appDatabase.py:354 msgid "Tool Offset" msgstr "" #: appDatabase.py:356 msgid "" "Tool Offset.\n" "Can be of a few types:\n" "Path = zero offset\n" "In = offset inside by half of tool diameter\n" "Out = offset outside by half of tool diameter\n" "Custom = custom offset using the Custom Offset value" msgstr "" #: appDatabase.py:371 msgid "Custom Offset" msgstr "" #: appDatabase.py:373 msgid "" "Custom Offset.\n" "A value to be used as offset from the current path." msgstr "" #: appDatabase.py:390 appDatabase.py:889 appEditors/appGCodeEditor.py:823 #: appGUI/ObjectUI.py:1500 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:38 #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:75 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:67 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:54 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:96 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:84 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:97 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:100 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:108 appPlugins/ToolCalculators.py:633 #: appPlugins/ToolCutOut.py:2399 appPlugins/ToolDrilling.py:2521 #: appPlugins/ToolIsolation.py:3654 appPlugins/ToolMilling.py:1428 #: appPlugins/ToolMilling.py:4550 msgid "Cut Z" msgstr "" #: appDatabase.py:392 msgid "" "Cutting Depth.\n" "The depth at which to cut into material." msgstr "" #: appDatabase.py:404 appDatabase.py:923 msgid "MultiDepth" msgstr "" #: appDatabase.py:406 msgid "" "Multi Depth.\n" "Selecting this will allow cutting in multiple passes,\n" "each pass adding a DPP parameter depth." msgstr "" #: appDatabase.py:417 appDatabase.py:939 msgid "DPP" msgstr "" #: appDatabase.py:419 appDatabase.py:941 msgid "" "DPP. Depth per Pass.\n" "The value used to cut into material on each pass." msgstr "" #: appDatabase.py:431 appDatabase.py:955 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:93 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:168 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:126 appPlugins/ToolDrilling.py:1560 #: appPlugins/ToolDrilling.py:2563 appPlugins/ToolMilling.py:3596 #: appPlugins/ToolMilling.py:4592 appPlugins/ToolSolderPaste.py:1387 msgid "Travel Z" msgstr "" #: appDatabase.py:433 msgid "" "Clearance Height.\n" "Height at which the milling bit will travel between cuts,\n" "above the surface of the material, avoiding all fixtures." msgstr "" #: appDatabase.py:446 msgid "ExtraCut" msgstr "" #: appDatabase.py:448 msgid "" "Extra Cut.\n" "If checked, after a isolation is finished an extra cut\n" "will be added where the start and end of isolation meet\n" "such as that this point is covered by this extra cut to\n" "ensure a complete isolation." msgstr "" #: appDatabase.py:461 msgid "E-Cut Length" msgstr "" #: appDatabase.py:463 msgid "" "Extra Cut length.\n" "If checked, after a isolation is finished an extra cut\n" "will be added where the start and end of isolation meet\n" "such as that this point is covered by this extra cut to\n" "ensure a complete isolation. This is the length of\n" "the extra cut." msgstr "" #: appDatabase.py:484 appGUI/preferences/tools/ToolsMillPrefGroupUI.py:198 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:163 #: appPlugins/ToolMilling.py:4610 msgid "Feedrate X-Y" msgstr "" #: appDatabase.py:486 msgid "" "Feedrate X-Y. Feedrate\n" "The speed on XY plane used while cutting into material." msgstr "" #: appDatabase.py:498 appDatabase.py:978 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:154 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:213 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:190 #: appPlugins/ToolDrilling.py:2580 appPlugins/ToolMilling.py:4628 msgid "Feedrate Z" msgstr "" #: appDatabase.py:500 msgid "" "Feedrate Z\n" "The speed on Z plane." msgstr "" #: appDatabase.py:512 msgid "FR Rapids" msgstr "" #: appDatabase.py:514 msgid "" "FR Rapids. Feedrate Rapids\n" "Speed used while moving as fast as possible.\n" "This is used only by some devices that can't use\n" "the G0 g-code command. Mostly 3D printers." msgstr "" #: appDatabase.py:533 appDatabase.py:1018 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:229 appPlugins/ToolDrilling.py:1578 #: appPlugins/ToolDrilling.py:2619 appPlugins/ToolMilling.py:3614 #: appPlugins/ToolMilling.py:4698 appPlugins/ToolSolderPaste.py:1565 #: appPlugins/ToolSolderPaste.py:1602 msgid "Spindle speed" msgstr "" #: appDatabase.py:535 msgid "" "Spindle Speed.\n" "If it's left empty it will not be used.\n" "The speed of the spindle in RPM." msgstr "" #: appDatabase.py:548 appDatabase.py:1033 appPlugins/ToolDrilling.py:2650 #: appPlugins/ToolMilling.py:4729 appPlugins/ToolSolderPaste.py:1579 #: appPlugins/ToolSolderPaste.py:1616 msgid "Dwell" msgstr "" #: appDatabase.py:550 appDatabase.py:1035 msgid "" "Dwell.\n" "Check this if a delay is needed to allow\n" "the spindle motor to reach its set speed." msgstr "" #: appDatabase.py:561 appDatabase.py:1046 msgid "Dwelltime" msgstr "" #: appDatabase.py:563 appDatabase.py:1048 msgid "" "Dwell Time.\n" "A delay used to allow the motor spindle reach its set speed." msgstr "" #: appDatabase.py:583 appPlugins/ToolNCC.py:4287 msgid "Operation" msgstr "" #: appDatabase.py:585 appPlugins/ToolNCC.py:4289 msgid "" "The 'Operation' can be:\n" "- Isolation -> will ensure that the non-copper clearing is always complete.\n" "If it's not successful then the non-copper clearing will fail, too.\n" "- Clear -> the regular non-copper clearing." msgstr "" #: appDatabase.py:592 appEditors/AppGerberEditor.py:6609 #: appEditors/exc_plugins/ExcCopyPlugin.py:158 appEditors/geo_plugins/GeoCopyPlugin.py:158 #: appEditors/geo_plugins/GeoPathPlugin.py:153 appPlugins/ToolNCC.py:4296 msgid "Clear" msgstr "" #: appDatabase.py:601 appDatabase.py:842 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:55 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:203 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:578 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:136 appPlugins/ToolIsolation.py:3719 #: appPlugins/ToolMilling.py:4283 appPlugins/ToolNCC.py:4305 msgid "Milling Type" msgstr "" #: appDatabase.py:603 appDatabase.py:611 appDatabase.py:844 appDatabase.py:852 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:57 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:205 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:213 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:138 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:146 appPlugins/ToolIsolation.py:3721 #: appPlugins/ToolIsolation.py:3729 appPlugins/ToolNCC.py:4307 appPlugins/ToolNCC.py:4315 msgid "" "Milling type:\n" "- climb / best for precision milling and to reduce tool usage\n" "- conventional / useful when there is no backlash compensation" msgstr "" #: appDatabase.py:608 appDatabase.py:849 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:61 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:210 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:143 appPlugins/ToolIsolation.py:3726 #: appPlugins/ToolNCC.py:4312 msgid "Climb" msgstr "" #: appDatabase.py:609 appDatabase.py:850 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:211 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144 appPlugins/ToolIsolation.py:3727 #: appPlugins/ToolNCC.py:4313 msgid "Conventional" msgstr "" #: appDatabase.py:621 appDatabase.py:727 appDatabase.py:827 appDatabase.py:1076 #: appEditors/geo_plugins/GeoPaintPlugin.py:254 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:254 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:532 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:612 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:168 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:151 appPlugins/ToolDrilling.py:2698 #: appPlugins/ToolIsolation.py:3704 appPlugins/ToolMilling.py:4364 #: appPlugins/ToolMilling.py:4467 appPlugins/ToolNCC.py:4328 appPlugins/ToolPaint.py:3153 msgid "Overlap" msgstr "" #: appDatabase.py:623 appDatabase.py:729 appEditors/geo_plugins/GeoPaintPlugin.py:256 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:614 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:170 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:153 appPlugins/ToolMilling.py:4366 #: appPlugins/ToolNCC.py:4330 appPlugins/ToolPaint.py:3155 msgid "" "How much (percentage) of the tool width to overlap each tool pass.\n" "Adjust the value starting with lower values\n" "and increasing it if areas that should be processed are still \n" "not processed.\n" "Lower values = faster processing, faster execution on CNC.\n" "Higher values = slow processing and slow execution on CNC\n" "due of too many paths." msgstr "" #: appDatabase.py:642 appDatabase.py:1118 appEditors/geo_plugins/GeoPaintPlugin.py:274 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:70 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:277 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:296 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:56 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:41 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:49 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:122 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:308 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:520 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:188 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:171 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:67 #: appPlugins/ToolCopperThieving.py:1325 appPlugins/ToolCopperThieving.py:1613 #: appPlugins/ToolCutOut.py:2440 appPlugins/ToolCutOut.py:2759 #: appPlugins/ToolExtract.py:1397 appPlugins/ToolFiducials.py:1080 #: appPlugins/ToolInvertGerber.py:256 appPlugins/ToolInvertGerber.py:264 #: appPlugins/ToolMilling.py:4454 appPlugins/ToolNCC.py:4372 appPlugins/ToolNCC.py:4476 #: appPlugins/ToolSolderPaste.py:1367 msgid "Margin" msgstr "" #: appDatabase.py:644 appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:72 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:58 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:123 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:136 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:522 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:190 appPlugins/ToolCopperThieving.py:1327 #: appPlugins/ToolFiducials.py:1082 appPlugins/ToolMilling.py:4456 #: appPlugins/ToolNCC.py:4374 appPlugins/ToolNCC.py:4478 msgid "Bounding box margin." msgstr "" #: appDatabase.py:655 appDatabase.py:763 appEditors/geo_plugins/GeoPaintPlugin.py:288 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:104 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:105 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:55 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:546 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:201 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:186 appPlugins/ToolExtract.py:1147 #: appPlugins/ToolLevelling.py:1911 appPlugins/ToolMilling.py:4482 #: appPlugins/ToolNCC.py:4349 appPlugins/ToolPaint.py:3189 #: appPlugins/ToolPunchGerber.py:2143 msgid "Method" msgstr "" #: appDatabase.py:657 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:203 #: appPlugins/ToolNCC.py:4351 msgid "" "Algorithm for copper clearing:\n" "- Standard: Fixed step inwards.\n" "- Seed-based: Outwards from seed.\n" "- Line-based: Parallel lines." msgstr "" #: appDatabase.py:665 appDatabase.py:777 appEditors/geo_plugins/GeoPaintPlugin.py:302 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:556 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolMilling.py:4492 #: appPlugins/ToolNCC.py:4364 appPlugins/ToolPaint.py:3203 msgid "Standard" msgstr "" #: appDatabase.py:665 appDatabase.py:777 appEditors/geo_plugins/GeoPaintPlugin.py:89 #: appEditors/geo_plugins/GeoPaintPlugin.py:180 appEditors/geo_plugins/GeoPaintPlugin.py:302 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:556 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolMilling.py:4492 #: appPlugins/ToolNCC.py:4364 appPlugins/ToolPaint.py:3203 msgid "Seed" msgstr "" #: appDatabase.py:665 appDatabase.py:777 appEditors/geo_plugins/GeoPaintPlugin.py:185 #: appEditors/geo_plugins/GeoPaintPlugin.py:302 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:556 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appParsers/ParseGerber.py:446 #: appParsers/ParseHPGL2.py:200 appPlugins/ToolImage.py:752 appPlugins/ToolMilling.py:4492 #: appPlugins/ToolNCC.py:4364 appPlugins/ToolPaint.py:3203 msgid "Lines" msgstr "" #: appDatabase.py:665 appDatabase.py:777 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolNCC.py:4364 #: appPlugins/ToolPaint.py:3203 msgid "Combo" msgstr "" #: appDatabase.py:673 appDatabase.py:788 appEditors/geo_plugins/GeoPaintPlugin.py:309 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:633 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:223 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:212 appPlugins/ToolLevelling.py:1123 #: appPlugins/ToolLevelling.py:1145 appPlugins/ToolLevelling.py:2000 #: appPlugins/ToolLevelling.py:2023 appPlugins/ToolMilling.py:4385 #: appPlugins/ToolNCC.py:4385 appPlugins/ToolNCC.py:4489 appPlugins/ToolPaint.py:3214 msgid "Connect" msgstr "" #: appDatabase.py:677 appDatabase.py:791 appEditors/geo_plugins/GeoPaintPlugin.py:311 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:636 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:225 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:214 appPlugins/ToolMilling.py:4388 #: appPlugins/ToolNCC.py:4389 appPlugins/ToolNCC.py:4491 appPlugins/ToolPaint.py:3217 msgid "" "Draw lines between resulting\n" "segments to minimize tool lifts." msgstr "" #: appDatabase.py:683 appDatabase.py:795 appEditors/geo_plugins/GeoPaintPlugin.py:319 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:232 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:219 appPlugins/ToolNCC.py:4395 #: appPlugins/ToolNCC.py:4497 appPlugins/ToolPaint.py:3221 msgid "Contour" msgstr "" #: appDatabase.py:687 appDatabase.py:798 appEditors/geo_plugins/GeoPaintPlugin.py:321 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:234 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:221 appPlugins/ToolNCC.py:4399 #: appPlugins/ToolNCC.py:4499 appPlugins/ToolPaint.py:3224 msgid "" "Cut around the perimeter of the polygon\n" "to trim rough edges." msgstr "" #: appDatabase.py:693 appDatabase.py:748 appEditors/AppGerberEditor.py:6783 #: appEditors/appGCodeEditor.py:812 appEditors/exc_plugins/ExcCopyPlugin.py:302 #: appEditors/exc_plugins/ExcCopyPlugin.py:379 appEditors/exc_plugins/ExcCopyPlugin.py:392 #: appEditors/geo_plugins/GeoCopyPlugin.py:302 appEditors/geo_plugins/GeoCopyPlugin.py:379 #: appEditors/geo_plugins/GeoCopyPlugin.py:392 #: appEditors/geo_plugins/GeoTransformationPlugin.py:603 appGUI/ObjectUI.py:138 #: appGUI/ObjectUI.py:1068 appGUI/ObjectUI.py:1490 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:121 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:134 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:241 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:217 #: appPlugins/ToolEtchCompensation.py:460 appPlugins/ToolMarkers.py:1337 #: appPlugins/ToolMarkers.py:1364 appPlugins/ToolMarkers.py:1377 #: appPlugins/ToolMarkers.py:1636 appPlugins/ToolMarkers.py:1641 appPlugins/ToolNCC.py:4405 #: appPlugins/ToolNCC.py:4505 appPlugins/ToolPaint.py:3174 appPlugins/ToolPaint.py:3271 #: appPlugins/ToolTransform.py:568 appPlugins/ToolTransform.py:884 msgid "Offset" msgstr "" #: appDatabase.py:697 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:243 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:253 appPlugins/ToolNCC.py:4409 #: appPlugins/ToolNCC.py:4507 msgid "" "If used, it will add an offset to the copper features.\n" "The copper clearing will finish to a distance\n" "from the copper features." msgstr "" #: appDatabase.py:750 appEditors/geo_plugins/GeoPaintPlugin.py:276 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:173 appPlugins/ToolPaint.py:3176 #: appPlugins/ToolPaint.py:3273 msgid "" "Distance by which to avoid\n" "the edges of the polygon to\n" "be painted." msgstr "" #: appDatabase.py:765 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:188 #: appPlugins/ToolPaint.py:3191 msgid "" "Algorithm for painting:\n" "- Standard: Fixed step inwards.\n" "- Seed-based: Outwards from seed.\n" "- Line-based: Parallel lines.\n" "- Laser-lines: Active only for Gerber objects.\n" "Will create lines that follow the traces.\n" "- Combo: In case of failure a new method will be picked from the above\n" "in the order specified." msgstr "" #: appDatabase.py:777 appDatabase.py:779 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolPaint.py:120 #: appPlugins/ToolPaint.py:394 appPlugins/ToolPaint.py:3203 appPlugins/ToolPaint.py:3205 msgid "Laser_lines" msgstr "" #: appDatabase.py:814 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:165 #: appPlugins/ToolIsolation.py:3678 msgid "Passes" msgstr "" #: appDatabase.py:816 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:167 #: appPlugins/ToolIsolation.py:3680 msgid "" "Width of the isolation gap in\n" "number (integer) of tool widths." msgstr "" #: appDatabase.py:829 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:191 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:534 appPlugins/ToolIsolation.py:3706 #: appPlugins/ToolMilling.py:4469 msgid "How much (percentage) of the tool width to overlap each tool pass." msgstr "" #: appDatabase.py:862 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:222 #: appPlugins/ToolIsolation.py:3739 msgid "Isolation Type" msgstr "" #: appDatabase.py:864 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:224 #: appPlugins/ToolIsolation.py:3741 msgid "" "Choose how the isolation will be executed:\n" "- 'Full' -> complete isolation of polygons\n" "- 'Ext' -> will isolate only on the outside\n" "- 'Int' -> will isolate only on the inside\n" "'Exterior' isolation is almost always possible\n" "(with the right tool) but 'Interior'\n" "isolation can be done only when there is an opening\n" "inside of the polygon (e.g polygon is a 'doughnut' shape)." msgstr "" #: appDatabase.py:873 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:233 appPlugins/ToolIsolation.py:3750 msgid "Full" msgstr "" #: appDatabase.py:874 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:234 #: appPlugins/ToolIsolation.py:3751 msgid "Ext" msgstr "" #: appDatabase.py:875 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:235 #: appPlugins/ToolIsolation.py:3752 msgid "Int" msgstr "" #: appDatabase.py:891 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:56 #: appPlugins/ToolDrilling.py:2523 appPlugins/ToolMilling.py:1430 msgid "" "Drill depth (negative)\n" "below the copper surface." msgstr "" #: appDatabase.py:907 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:288 #: appPlugins/ToolDrilling.py:2674 msgid "Offset Z" msgstr "" #: appDatabase.py:909 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:290 #: appPlugins/ToolDrilling.py:2676 msgid "" "Some drill bits (the larger ones) need to drill deeper\n" "to create the desired exit hole diameter due of the tip shape.\n" "The value here can compensate the Cut Z parameter." msgstr "" #: appDatabase.py:926 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:87 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:73 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:103 appPlugins/ToolCutOut.py:2416 #: appPlugins/ToolDrilling.py:2541 appPlugins/ToolMilling.py:4570 msgid "" "Use multiple passes to limit\n" "the cut depth in each pass. Will\n" "cut multiple times until Cut Z is\n" "reached." msgstr "" #: appDatabase.py:948 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:99 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:85 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:114 appPlugins/ToolCutOut.py:2427 #: appPlugins/ToolDrilling.py:2554 appPlugins/ToolMilling.py:4583 msgid "Depth of each pass (positive)." msgstr "" #: appDatabase.py:957 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:95 #: appPlugins/ToolDrilling.py:1562 appPlugins/ToolDrilling.py:2565 #: appPlugins/ToolMilling.py:3598 appPlugins/ToolMilling.py:4594 msgid "" "Tool height when travelling\n" "across the XY plane." msgstr "" #: appDatabase.py:980 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:156 #: appPlugins/ToolDrilling.py:2582 appPlugins/ToolMilling.py:4630 msgid "" "Tool speed while drilling\n" "(in units per minute).\n" "So called 'Plunge' feedrate.\n" "This is for linear move G01." msgstr "" #: appDatabase.py:995 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:322 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:326 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:171 #: appPlugins/ToolDrilling.py:2597 appPlugins/ToolMilling.py:4645 #: appPlugins/ToolSolderPaste.py:1507 msgid "Feedrate Rapids" msgstr "" #: appDatabase.py:997 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:324 #: appPlugins/ToolDrilling.py:2599 appPlugins/ToolMilling.py:4647 msgid "" "Tool speed while drilling\n" "(in units per minute).\n" "This is for the rapid move G00.\n" "It is useful only for Marlin,\n" "ignore for any other cases." msgstr "" #: appDatabase.py:1020 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:171 #: appPlugins/ToolDrilling.py:1580 appPlugins/ToolDrilling.py:2621 #: appPlugins/ToolMilling.py:3616 appPlugins/ToolMilling.py:4700 msgid "" "Speed of the spindle\n" "in RPM (optional)" msgstr "" #: appDatabase.py:1065 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:239 #: appPlugins/ToolDrilling.py:2690 msgid "Drill slots" msgstr "" #: appDatabase.py:1067 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:241 #: appPlugins/ToolDrilling.py:2692 msgid "If the selected tool has slots then they will be drilled." msgstr "" #: appDatabase.py:1078 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:256 #: appPlugins/ToolDrilling.py:2700 msgid "How much (percentage) of the tool diameter to overlap previous drill hole." msgstr "" #: appDatabase.py:1092 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:246 #: appPlugins/ToolDrilling.py:2714 msgid "Last drill" msgstr "" #: appDatabase.py:1094 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:248 #: appPlugins/ToolDrilling.py:2716 msgid "" "If the slot length is not completely covered by drill holes,\n" "add a drill hole on the slot end point." msgstr "" #: appDatabase.py:1120 appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:298 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:124 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:310 appPlugins/ToolCutOut.py:2442 #: appPlugins/ToolCutOut.py:2761 appPlugins/ToolExtract.py:1399 msgid "" "Margin over bounds. A positive value here\n" "will make the cutout of the PCB further from\n" "the actual PCB border" msgstr "" #: appDatabase.py:1132 msgid "Gap size" msgstr "" #: appDatabase.py:1134 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:152 #: appPlugins/ToolCutOut.py:2465 msgid "" "The size of the bridge gaps in the cutout\n" "used to keep the board connected to\n" "the surrounding material (the one \n" "from which the PCB is cutout)." msgstr "" #: appDatabase.py:1143 msgid "Gap type" msgstr "" #: appDatabase.py:1145 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:169 #: appPlugins/ToolCutOut.py:2481 msgid "" "The type of gap:\n" "- Bridge -> the cutout will be interrupted by bridges\n" "- Thin -> same as 'bridge' but it will be thinner by partially milling the gap\n" "- M-Bites -> 'Mouse Bites' - same as 'bridge' but covered with drill holes" msgstr "" #: appDatabase.py:1153 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:176 #: appPlugins/ToolCutOut.py:2496 appPlugins/ToolCutOut.py:2547 msgid "Bridge" msgstr "" #: appDatabase.py:1154 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:176 #: appPlugins/ToolCutOut.py:2496 msgid "Thin" msgstr "" #: appDatabase.py:1165 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:187 #: appPlugins/ToolCutOut.py:2502 msgid "Depth" msgstr "" #: appDatabase.py:1167 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:189 #: appPlugins/ToolCutOut.py:2504 msgid "" "The depth until the milling is done\n" "in order to thin the gaps." msgstr "" #: appDatabase.py:1183 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:208 #: appPlugins/ToolCutOut.py:2518 msgid "The drill hole diameter when doing mouse bites." msgstr "" #: appDatabase.py:1194 appEditors/exc_plugins/ExcCopyPlugin.py:301 #: appEditors/geo_plugins/GeoCopyPlugin.py:301 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:169 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:208 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:247 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:218 #: appPlugins/ToolCopperThieving.py:1469 appPlugins/ToolCopperThieving.py:1515 #: appPlugins/ToolCopperThieving.py:1561 appPlugins/ToolCutOut.py:2528 msgid "Spacing" msgstr "" #: appDatabase.py:1196 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:220 #: appPlugins/ToolCutOut.py:2530 msgid "The spacing between drill holes when doing mouse bites." msgstr "" #: appDatabase.py:1215 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:59 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:198 appPlugins/ToolCutOut.py:2385 #: appPlugins/ToolFilm.py:1528 msgid "Convex Shape" msgstr "" #: appDatabase.py:1218 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:61 #: appPlugins/ToolCutOut.py:2387 appPlugins/ToolCutOut.py:2392 msgid "" "Create a convex shape surrounding the entire PCB.\n" "Used only if the source object type is Gerber." msgstr "" #: appDatabase.py:1226 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:137 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:234 appPlugins/ToolCutOut.py:2449 #: appPlugins/ToolCutOut.py:2568 appPlugins/ToolCutOut.py:2667 msgid "Gaps" msgstr "" #: appDatabase.py:1228 appPlugins/ToolCutOut.py:2570 msgid "" "Number of gaps used for the Automatic cutout.\n" "There can be maximum 8 bridges/gaps.\n" "The choices are:\n" "- None - no gaps\n" "- lr - left + right\n" "- tb - top + bottom\n" "- 4 - left + right +top + bottom\n" "- 2lr - 2*left + 2*right\n" "- 2tb - 2*top + 2*bottom\n" "- 8 - 2*left + 2*right +2*top + 2*bottom" msgstr "" #: appDatabase.py:1265 msgid "Add Tool in DB" msgstr "" #: appDatabase.py:1268 msgid "" "Add a new tool in the Tools Database.\n" "It will be used in the Geometry UI.\n" "You can edit it after it is added." msgstr "" #: appDatabase.py:1282 msgid "Delete Tool from DB" msgstr "" #: appDatabase.py:1285 msgid "Remove a selection of tools in the Tools Database." msgstr "" #: appDatabase.py:1289 msgid "Export DB" msgstr "" #: appDatabase.py:1292 msgid "Save the Tools Database to a custom text file." msgstr "" #: appDatabase.py:1296 msgid "Import DB" msgstr "" #: appDatabase.py:1299 msgid "Load the Tools Database information's from a custom text file." msgstr "" #: appDatabase.py:1303 msgid "Save DB" msgstr "" #: appDatabase.py:1306 msgid "Save the Tools Database information's." msgstr "" #: appDatabase.py:1310 msgid "Transfer the Tool" msgstr "" #: appDatabase.py:1312 msgid "" "Insert a new tool in the Tools Table of the\n" "object/application tool after selecting a tool\n" "in the Tools Database." msgstr "" #: appDatabase.py:1325 appEditors/AppTextEditor.py:365 appGUI/GUIElements.py:2769 #: appGUI/GUIElements.py:2839 appGUI/GUIElements.py:2900 appGUI/GUIElements.py:2965 #: appGUI/GUIElements.py:4416 appGUI/MainGUI.py:1713 #: appGUI/preferences/PreferencesUIManager.py:1153 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:418 appMain.py:2758 appMain.py:4038 #: appMain.py:5000 appMain.py:5263 appMain.py:10247 appMain.py:12007 msgid "Cancel" msgstr "" #: appDatabase.py:1338 appDatabase.py:1349 appEditors/AppExcEditor.py:4866 #: appEditors/AppExcEditor.py:4877 appEditors/appGCodeEditor.py:906 #: appEditors/appGCodeEditor.py:917 appEditors/exc_plugins/ExcCopyPlugin.py:459 #: appEditors/exc_plugins/ExcCopyPlugin.py:468 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:336 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:345 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:402 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:411 #: appEditors/geo_plugins/GeoCopyPlugin.py:459 appEditors/geo_plugins/GeoCopyPlugin.py:468 #: appGUI/ObjectUI.py:158 appGUI/ObjectUI.py:169 appPlugins/ToolAlignObjects.py:560 #: appPlugins/ToolAlignObjects.py:571 appPlugins/ToolCalculators.py:1068 #: appPlugins/ToolCalculators.py:1079 appPlugins/ToolCopperThieving.py:1790 #: appPlugins/ToolCopperThieving.py:1801 appPlugins/ToolCutOut.py:2830 #: appPlugins/ToolCutOut.py:2841 appPlugins/ToolDblSided.py:1165 #: appPlugins/ToolDblSided.py:1176 appPlugins/ToolDistance.py:992 #: appPlugins/ToolDistance.py:1003 appPlugins/ToolDrilling.py:3040 #: appPlugins/ToolDrilling.py:3051 appPlugins/ToolEtchCompensation.py:517 #: appPlugins/ToolEtchCompensation.py:528 appPlugins/ToolExtract.py:1467 #: appPlugins/ToolExtract.py:1478 appPlugins/ToolFiducials.py:1231 #: appPlugins/ToolFiducials.py:1242 appPlugins/ToolFilm.py:1869 appPlugins/ToolFilm.py:1880 #: appPlugins/ToolFollow.py:796 appPlugins/ToolFollow.py:807 #: appPlugins/ToolInvertGerber.py:325 appPlugins/ToolInvertGerber.py:336 #: appPlugins/ToolIsolation.py:4024 appPlugins/ToolIsolation.py:4035 #: appPlugins/ToolLevelling.py:2352 appPlugins/ToolLevelling.py:2363 #: appPlugins/ToolMarkers.py:1651 appPlugins/ToolMarkers.py:1662 #: appPlugins/ToolMilling.py:5092 appPlugins/ToolMilling.py:5103 appPlugins/ToolNCC.py:4733 #: appPlugins/ToolNCC.py:4744 appPlugins/ToolObjectDistance.py:629 #: appPlugins/ToolObjectDistance.py:640 appPlugins/ToolOptimal.py:723 #: appPlugins/ToolOptimal.py:734 appPlugins/ToolPaint.py:3435 appPlugins/ToolPaint.py:3446 #: appPlugins/ToolPanelize.py:1457 appPlugins/ToolPanelize.py:1468 #: appPlugins/ToolPcbWizard.py:521 appPlugins/ToolPcbWizard.py:532 #: appPlugins/ToolPunchGerber.py:2410 appPlugins/ToolPunchGerber.py:2421 #: appPlugins/ToolQRCode.py:1036 appPlugins/ToolQRCode.py:1047 #: appPlugins/ToolRulesCheck.py:1872 appPlugins/ToolRulesCheck.py:1883 #: appPlugins/ToolSolderPaste.py:1783 appPlugins/ToolSolderPaste.py:1794 #: appPlugins/ToolSub.py:984 appPlugins/ToolSub.py:995 appPlugins/ToolTransform.py:1062 #: appPlugins/ToolTransform.py:1073 appTool.py:333 appTool.py:344 msgid "Edited value is out of range" msgstr "" #: appDatabase.py:1344 appDatabase.py:1351 appEditors/AppExcEditor.py:4872 #: appEditors/AppExcEditor.py:4879 appEditors/appGCodeEditor.py:912 #: appEditors/appGCodeEditor.py:919 appGUI/ObjectUI.py:164 appGUI/ObjectUI.py:171 #: appPlugins/ToolAlignObjects.py:566 appPlugins/ToolAlignObjects.py:573 #: appPlugins/ToolCalculators.py:1074 appPlugins/ToolCalculators.py:1081 #: appPlugins/ToolCopperThieving.py:1796 appPlugins/ToolCopperThieving.py:1803 #: appPlugins/ToolCutOut.py:2836 appPlugins/ToolCutOut.py:2843 #: appPlugins/ToolDblSided.py:1171 appPlugins/ToolDblSided.py:1178 #: appPlugins/ToolDistance.py:998 appPlugins/ToolDistance.py:1005 #: appPlugins/ToolDrilling.py:3046 appPlugins/ToolDrilling.py:3053 #: appPlugins/ToolEtchCompensation.py:523 appPlugins/ToolEtchCompensation.py:530 #: appPlugins/ToolExtract.py:1473 appPlugins/ToolExtract.py:1480 #: appPlugins/ToolFiducials.py:1237 appPlugins/ToolFiducials.py:1244 #: appPlugins/ToolFilm.py:1875 appPlugins/ToolFilm.py:1882 appPlugins/ToolFollow.py:802 #: appPlugins/ToolFollow.py:809 appPlugins/ToolInvertGerber.py:331 #: appPlugins/ToolInvertGerber.py:338 appPlugins/ToolIsolation.py:4030 #: appPlugins/ToolIsolation.py:4037 appPlugins/ToolLevelling.py:2358 #: appPlugins/ToolLevelling.py:2365 appPlugins/ToolMarkers.py:1657 #: appPlugins/ToolMarkers.py:1664 appPlugins/ToolMilling.py:5098 #: appPlugins/ToolMilling.py:5105 appPlugins/ToolNCC.py:4739 appPlugins/ToolNCC.py:4746 #: appPlugins/ToolObjectDistance.py:635 appPlugins/ToolObjectDistance.py:642 #: appPlugins/ToolOptimal.py:729 appPlugins/ToolOptimal.py:736 appPlugins/ToolPaint.py:3441 #: appPlugins/ToolPaint.py:3448 appPlugins/ToolPanelize.py:1463 #: appPlugins/ToolPanelize.py:1470 appPlugins/ToolPcbWizard.py:527 #: appPlugins/ToolPcbWizard.py:534 appPlugins/ToolPunchGerber.py:2416 #: appPlugins/ToolPunchGerber.py:2423 appPlugins/ToolQRCode.py:1042 #: appPlugins/ToolQRCode.py:1049 appPlugins/ToolRulesCheck.py:1878 #: appPlugins/ToolRulesCheck.py:1885 appPlugins/ToolSolderPaste.py:1789 #: appPlugins/ToolSolderPaste.py:1796 appPlugins/ToolSub.py:990 appPlugins/ToolSub.py:997 #: appPlugins/ToolTransform.py:1068 appPlugins/ToolTransform.py:1075 appTool.py:339 #: appTool.py:346 msgid "Edited value is within limits." msgstr "" #: appDatabase.py:1600 msgid "Sort by Target" msgstr "" #: appDatabase.py:1604 msgid "Sort by Diameter" msgstr "" #: appDatabase.py:1609 msgid "Add to DB" msgstr "" #: appDatabase.py:1612 msgid "Copy from DB" msgstr "" #: appDatabase.py:1615 msgid "Delete from DB" msgstr "" #: appDatabase.py:1620 appMain.py:4027 appMain.py:10235 appTranslation.py:216 msgid "Save changes" msgstr "" #: appDatabase.py:1724 appDatabase.py:2211 appDatabase.py:2663 appDatabase.py:2675 #: appGUI/MainGUI.py:540 appMain.py:6653 appMain.py:6690 appMain.py:6777 appMain.py:6789 #: appMain.py:6798 appMain.py:6808 appPlugins/ToolCutOut.py:557 appPlugins/ToolCutOut.py:578 #: appPlugins/ToolCutOut.py:615 appPlugins/ToolIsolation.py:2974 #: appPlugins/ToolIsolation.py:2984 appPlugins/ToolIsolation.py:3064 #: appPlugins/ToolMilling.py:2245 appPlugins/ToolNCC.py:3912 appPlugins/ToolNCC.py:3922 #: appPlugins/ToolNCC.py:3998 appPlugins/ToolPaint.py:2788 appPlugins/ToolPaint.py:2798 #: appPlugins/ToolPaint.py:2883 msgid "Tools Database" msgstr "" #: appDatabase.py:1743 appDatabase.py:2197 appPlugins/ToolCutOut.py:452 #: appPlugins/ToolDrilling.py:1148 appPlugins/ToolIsolation.py:1359 #: appPlugins/ToolMilling.py:2086 appPlugins/ToolNCC.py:1213 appPlugins/ToolPaint.py:858 msgid "Failed to parse Tools DB file." msgstr "" #: appDatabase.py:1746 appDatabase.py:2200 msgid "Loaded Tools DB from" msgstr "" #: appDatabase.py:2047 msgid "Tool added to DB." msgstr "" #: appDatabase.py:2080 msgid "Tool copied from Tools DB." msgstr "" #: appDatabase.py:2114 msgid "Tool removed from Tools DB." msgstr "" #: appDatabase.py:2127 msgid "Export Tools Database" msgstr "" #: appDatabase.py:2129 msgid "Tools_Database" msgstr "" #: appDatabase.py:2166 appDatabase.py:2169 appDatabase.py:2272 msgid "Failed to write Tools DB to file." msgstr "" #: appDatabase.py:2172 msgid "Exported Tools DB to" msgstr "" #: appDatabase.py:2179 msgid "Import FlatCAM Tools DB" msgstr "" #: appDatabase.py:2276 msgid "Saved Tools DB." msgstr "" #: appDatabase.py:2483 msgid "To change tool properties select only one tool. Tools currently selected" msgstr "" #: appDatabase.py:2639 msgid "No Tool/row selected in the Tools Database table" msgstr "" #: appDatabase.py:2643 appPlugins/ToolDrilling.py:1152 msgid "Tools DB empty." msgstr "" #: appDatabase.py:2670 msgid "Tools in Tools Database edited but not saved." msgstr "" #: appDatabase.py:2679 msgid "Cancelled adding tool from DB." msgstr "" #: appEditors/AppExcEditor.py:246 appEditors/AppExcEditor.py:304 #: appEditors/AppExcEditor.py:533 appEditors/AppExcEditor.py:968 #: appEditors/AppExcEditor.py:1027 appEditors/AppExcEditor.py:1349 #: appEditors/AppGerberEditor.py:248 appEditors/AppGerberEditor.py:255 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:352 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:417 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:437 msgid "Click to place ..." msgstr "" #: appEditors/AppExcEditor.py:254 msgid "To add a drill first select a tool" msgstr "" #: appEditors/AppExcEditor.py:268 appEditors/AppExcEditor.py:287 msgid "Drill" msgstr "" #: appEditors/AppExcEditor.py:368 appEditors/AppExcEditor.py:813 #: appEditors/AppExcEditor.py:1166 appEditors/AppExcEditor.py:1727 #: appEditors/AppExcEditor.py:2161 appEditors/AppExcEditor.py:2321 #: appEditors/AppExcEditor.py:2436 appEditors/AppExcEditor.py:3253 #: appEditors/AppExcEditor.py:4077 appEditors/AppExcEditor.py:4084 #: appEditors/AppExcEditor.py:4549 appEditors/AppGeoEditor.py:673 #: appEditors/AppGeoEditor.py:918 appEditors/AppGeoEditor.py:1034 #: appEditors/AppGeoEditor.py:1231 appEditors/AppGeoEditor.py:1440 #: appEditors/AppGeoEditor.py:1779 appEditors/AppGeoEditor.py:1892 #: appEditors/AppGeoEditor.py:2225 appEditors/AppGeoEditor.py:2689 #: appEditors/AppGeoEditor.py:2759 appEditors/AppGeoEditor.py:2785 #: appEditors/AppGeoEditor.py:2813 appEditors/AppGeoEditor.py:2953 #: appEditors/AppGeoEditor.py:4372 appEditors/AppGeoEditor.py:4386 #: appEditors/AppGeoEditor.py:5087 appEditors/AppGeoEditor.py:5140 #: appEditors/AppGeoEditor.py:5203 appEditors/AppGeoEditor.py:5229 #: appEditors/AppGeoEditor.py:5254 appEditors/AppGeoEditor.py:5286 #: appEditors/AppGerberEditor.py:390 appEditors/AppGerberEditor.py:814 #: appEditors/AppGerberEditor.py:941 appEditors/AppGerberEditor.py:1253 #: appEditors/AppGerberEditor.py:1514 appEditors/AppGerberEditor.py:1724 #: appEditors/AppGerberEditor.py:2014 appEditors/AppGerberEditor.py:2310 #: appEditors/AppGerberEditor.py:2391 appEditors/AppGerberEditor.py:2538 #: appEditors/AppGerberEditor.py:3251 appEditors/AppGerberEditor.py:5024 #: appEditors/AppGerberEditor.py:5329 appEditors/AppGerberEditor.py:5347 #: appEditors/AppGerberEditor.py:5797 appEditors/AppGerberEditor.py:5980 #: appEditors/AppGerberEditor.py:6042 appEditors/AppGerberEditor.py:6089 #: appEditors/AppGerberEditor.py:7487 appEditors/AppGerberEditor.py:7649 #: appEditors/AppGerberEditor.py:7651 appEditors/AppGerberEditor.py:7722 #: appEditors/geo_plugins/GeoBufferPlugin.py:201 #: appEditors/geo_plugins/GeoBufferPlugin.py:267 #: appEditors/geo_plugins/GeoBufferPlugin.py:335 #: appEditors/geo_plugins/GeoPaintPlugin.py:214 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:118 #: appEditors/geo_plugins/GeoTransformationPlugin.py:326 #: appEditors/geo_plugins/GeoTransformationPlugin.py:457 #: appEditors/geo_plugins/GeoTransformationPlugin.py:459 #: appEditors/geo_plugins/GeoTransformationPlugin.py:515 appGUI/MainGUI.py:3525 #: appGUI/MainGUI.py:3560 appGUI/MainGUI.py:4069 appMain.py:5773 appMain.py:5898 #: appObjects/GeometryObject.py:543 appObjects/GeometryObject.py:1229 #: appObjects/GeometryObject.py:1308 appObjects/GerberObject.py:427 #: appParsers/ParseGerber.py:2205 appParsers/ParseGerber.py:2299 #: appParsers/ParseGerber.py:2374 appParsers/ParseGerber.py:2448 #: appParsers/ParseGerber.py:2510 appPlugins/ToolAlignObjects.py:276 #: appPlugins/ToolAlignObjects.py:298 appPlugins/ToolCalculators.py:332 #: appPlugins/ToolCalculators.py:342 appPlugins/ToolCutOut.py:1493 #: appPlugins/ToolDistance.py:367 appPlugins/ToolDistance.py:394 #: appPlugins/ToolDistance.py:626 appPlugins/ToolFiducials.py:673 #: appPlugins/ToolFiducials.py:688 appPlugins/ToolFollow.py:322 appPlugins/ToolFollow.py:390 #: appPlugins/ToolIsolation.py:1608 appPlugins/ToolMarkers.py:1065 #: appPlugins/ToolMove.py:244 appPlugins/ToolObjectDistance.py:427 #: appPlugins/ToolPaint.py:2316 appPlugins/ToolPanelize.py:1094 #: appPlugins/ToolSolderPaste.py:926 tclCommands/TclCommandPanelize.py:430 #: tclCommands/TclCommandPanelize.py:440 tclCommands/TclCommandSetOrigin.py:113 msgid "Done." msgstr "" #: appEditors/AppExcEditor.py:449 appEditors/AppExcEditor.py:462 #: appEditors/AppExcEditor.py:800 appEditors/AppExcEditor.py:1259 #: appEditors/AppExcEditor.py:1272 appEditors/AppExcEditor.py:1714 #: appEditors/AppGeoEditor.py:636 appEditors/AppGeoEditor.py:639 #: appEditors/AppGeoEditor.py:1129 appEditors/AppGeoEditor.py:1137 #: appEditors/AppGeoEditor.py:1335 appEditors/AppGeoEditor.py:1349 #: appEditors/AppGeoEditor.py:1548 appEditors/AppGeoEditor.py:1562 #: appEditors/AppGeoEditor.py:2083 appEditors/AppGeoEditor.py:2097 #: appEditors/AppGeoEditor.py:2592 appEditors/AppGeoEditor.py:2606 #: appEditors/AppGerberEditor.py:801 appEditors/AppGerberEditor.py:3925 #: appEditors/AppGerberEditor.py:5976 appEditors/geo_plugins/GeoCirclePlugin.py:99 #: appEditors/geo_plugins/GeoRectanglePlugin.py:102 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:104 appMain.py:5307 appMain.py:5917 #: appMain.py:9199 appMain.py:10630 appMain.py:10757 appMain.py:12238 appMain.py:12252 #: appMain.py:12262 appMain.py:12279 appObjects/CNCJobObject.py:842 #: appPlugins/ToolCopperThieving.py:337 appPlugins/ToolCopperThieving.py:932 #: appPlugins/ToolCopperThieving.py:1144 appPlugins/ToolCutOut.py:750 #: appPlugins/ToolCutOut.py:773 appPlugins/ToolCutOut.py:905 appPlugins/ToolCutOut.py:1159 #: appPlugins/ToolCutOut.py:1310 appPlugins/ToolCutOut.py:1429 appPlugins/ToolCutOut.py:1447 #: appPlugins/ToolCutOut.py:1461 appPlugins/ToolDblSided.py:586 #: appPlugins/ToolDblSided.py:599 appPlugins/ToolDrilling.py:2013 #: appPlugins/ToolExtract.py:424 appPlugins/ToolExtract.py:790 appPlugins/ToolExtract.py:839 #: appPlugins/ToolExtract.py:848 appPlugins/ToolExtract.py:852 #: appPlugins/ToolFiducials.py:352 appPlugins/ToolFiducials.py:626 #: appPlugins/ToolFiducials.py:682 appPlugins/ToolFiducials.py:697 #: appPlugins/ToolFilm.py:1019 appPlugins/ToolImage.py:274 appPlugins/ToolImage.py:336 #: appPlugins/ToolIsolation.py:1513 appPlugins/ToolMarkers.py:375 #: appPlugins/ToolMarkers.py:398 appPlugins/ToolMarkers.py:406 appPlugins/ToolMarkers.py:430 #: appPlugins/ToolMarkers.py:901 appPlugins/ToolMarkers.py:1017 #: appPlugins/ToolMarkers.py:1026 appPlugins/ToolMarkers.py:1063 appPlugins/ToolMove.py:195 #: appPlugins/ToolPaint.py:2310 appPlugins/ToolSolderPaste.py:824 #: appPlugins/ToolSolderPaste.py:1151 camlib.py:1224 camlib.py:2463 camlib.py:2536 #: camlib.py:2604 camlib.py:2676 camlib.py:2679 camlib.py:5552 camlib.py:5971 msgid "Failed." msgstr "" #: appEditors/AppExcEditor.py:541 msgid "To add an Drill Array first select a tool in Tool Table" msgstr "" #: appEditors/AppExcEditor.py:554 appEditors/AppExcEditor.py:572 msgid "Drill Array" msgstr "" #: appEditors/AppExcEditor.py:619 appEditors/AppExcEditor.py:1444 msgid "Click on the Circular Array Start position" msgstr "" #: appEditors/AppExcEditor.py:794 appEditors/AppExcEditor.py:1686 #: appEditors/AppGerberEditor.py:796 msgid "Too many items for the selected spacing angle." msgstr "" #: appEditors/AppExcEditor.py:976 msgid "To add a slot first select a tool" msgstr "" #: appEditors/AppExcEditor.py:992 appEditors/AppExcEditor.py:1010 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:168 msgid "Slot" msgstr "" #: appEditors/AppExcEditor.py:1357 msgid "To add an Slot Array first select a tool in Tool Table" msgstr "" #: appEditors/AppExcEditor.py:1371 appEditors/AppExcEditor.py:1388 msgid "Slot Array" msgstr "" #: appEditors/AppExcEditor.py:1915 appEditors/AppExcEditor.py:1928 #: appEditors/exc_plugins/ExcResizePlugin.py:150 #: appEditors/exc_plugins/ExcResizePlugin.py:165 msgid "Resize" msgstr "" #: appEditors/AppExcEditor.py:1946 msgid "Click on the Drill(s) to resize ..." msgstr "" #: appEditors/AppExcEditor.py:1986 msgid "Resize drill(s) failed. Please enter a diameter for resize." msgstr "" #: appEditors/AppExcEditor.py:2163 msgid "Nothing selected" msgstr "" #: appEditors/AppExcEditor.py:2273 appEditors/AppExcEditor.py:2284 appGUI/MainGUI.py:3815 #: appGUI/MainGUI.py:3901 appGUI/MainGUI.py:3948 appGUI/MainGUI.py:4078 #: appGUI/MainGUI.py:4194 appGUI/MainGUI.py:4224 msgid "Cancelled. Nothing selected." msgstr "" #: appEditors/AppExcEditor.py:2277 appEditors/AppGeoEditor.py:1815 #: appEditors/AppGeoEditor.py:1864 appEditors/AppGeoEditor.py:2150 #: appEditors/AppGeoEditor.py:2199 appEditors/AppGerberEditor.py:2194 #: appEditors/exc_plugins/ExcCopyPlugin.py:473 appEditors/exc_plugins/ExcCopyPlugin.py:495 #: appEditors/exc_plugins/ExcCopyPlugin.py:504 appEditors/geo_plugins/GeoCopyPlugin.py:473 #: appEditors/geo_plugins/GeoCopyPlugin.py:495 appEditors/geo_plugins/GeoCopyPlugin.py:504 msgid "Click on reference location ..." msgstr "" #: appEditors/AppExcEditor.py:2289 appEditors/AppGerberEditor.py:481 #: appEditors/AppGerberEditor.py:2192 appEditors/AppGerberEditor.py:2222 #: appGUI/MainGUI.py:4217 msgid "Click on target location ..." msgstr "" #: appEditors/AppExcEditor.py:2656 appEditors/AppGeoEditor.py:3774 #: appEditors/AppGerberEditor.py:3505 appEditors/AppGerberEditor.py:6305 #: appEditors/AppGerberEditor.py:6602 appGUI/GUIElements.py:469 appGUI/GUIElements.py:1245 #: appGUI/GUIElements.py:1489 appGUI/GUIElements.py:1928 appGUI/GUIElements.py:2214 #: appGUI/GUIElements.py:4478 appGUI/MainGUI.py:467 appGUI/MainGUI.py:752 #: appGUI/MainGUI.py:811 appGUI/MainGUI.py:870 appGUI/MainGUI.py:950 appGUI/MainGUI.py:1093 #: appGUI/MainGUI.py:1239 appGUI/MainGUI.py:1300 appGUI/MainGUI.py:1345 #: appGUI/MainGUI.py:1905 appGUI/MainGUI.py:2472 appGUI/MainGUI.py:2616 #: appGUI/MainGUI.py:2668 appGUI/MainGUI.py:2714 appGUI/MainGUI.py:5283 #: appGUI/MainGUI.py:5383 appGUI/MainGUI.py:5524 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:396 appMain.py:7252 #: appPlugins/ToolDrilling.py:291 appPlugins/ToolIsolation.py:212 #: appPlugins/ToolMilling.py:405 appPlugins/ToolMilling.py:417 appPlugins/ToolNCC.py:213 #: appPlugins/ToolPaint.py:209 appPlugins/ToolSolderPaste.py:124 msgid "Delete" msgstr "" #: appEditors/AppExcEditor.py:2879 appObjects/ExcellonObject.py:385 #: appPlugins/ToolDrilling.py:750 appPlugins/ToolMilling.py:1183 #: appPlugins/ToolMilling.py:4057 msgid "Total Drills" msgstr "" #: appEditors/AppExcEditor.py:2911 appObjects/ExcellonObject.py:419 #: appPlugins/ToolDrilling.py:777 appPlugins/ToolMilling.py:1210 #: appPlugins/ToolMilling.py:4081 msgid "Total Slots" msgstr "" #: appEditors/AppExcEditor.py:2989 appEditors/AppGeoEditor.py:3706 #: appEditors/AppGerberEditor.py:4275 appEditors/appGCodeEditor.py:609 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:184 appObjects/CNCJobObject.py:603 #: appObjects/DocumentObject.py:193 appObjects/ExcellonObject.py:219 #: appObjects/FlatCAMScript.py:177 appObjects/GeometryObject.py:458 #: appObjects/GerberObject.py:226 appPlugins/ToolCutOut.py:289 #: appPlugins/ToolDblSided.py:209 appPlugins/ToolDrilling.py:539 #: appPlugins/ToolFiducials.py:209 appPlugins/ToolFilm.py:259 appPlugins/ToolFollow.py:163 #: appPlugins/ToolIsolation.py:453 appPlugins/ToolLevelling.py:385 #: appPlugins/ToolMarkers.py:226 appPlugins/ToolMilling.py:690 appPlugins/ToolNCC.py:402 #: appPlugins/ToolPaint.py:424 appPlugins/ToolPanelize.py:269 #: appPlugins/ToolPunchGerber.py:407 appPlugins/ToolQRCode.py:184 appPlugins/ToolSub.py:225 msgid "Beginner" msgstr "" #: appEditors/AppExcEditor.py:3000 appEditors/AppGeoEditor.py:3719 #: appEditors/AppGerberEditor.py:4288 appEditors/appGCodeEditor.py:622 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:185 appObjects/CNCJobObject.py:613 #: appObjects/DocumentObject.py:202 appObjects/ExcellonObject.py:236 #: appObjects/FlatCAMScript.py:186 appObjects/GeometryObject.py:467 #: appObjects/GerberObject.py:241 appPlugins/ToolCutOut.py:325 #: appPlugins/ToolDblSided.py:223 appPlugins/ToolDrilling.py:582 #: appPlugins/ToolFiducials.py:224 appPlugins/ToolFilm.py:276 appPlugins/ToolFollow.py:175 #: appPlugins/ToolIsolation.py:510 appPlugins/ToolLevelling.py:400 #: appPlugins/ToolMarkers.py:244 appPlugins/ToolMilling.py:751 appPlugins/ToolNCC.py:440 #: appPlugins/ToolPaint.py:449 appPlugins/ToolPanelize.py:281 #: appPlugins/ToolPunchGerber.py:419 appPlugins/ToolQRCode.py:198 appPlugins/ToolSub.py:236 msgid "Advanced" msgstr "" #: appEditors/AppExcEditor.py:3023 appObjects/GeometryObject.py:719 #: appObjects/GeometryObject.py:1378 appPlugins/ToolDrilling.py:1778 #: appPlugins/ToolIsolation.py:1501 appPlugins/ToolIsolation.py:1991 #: appPlugins/ToolMilling.py:2318 appPlugins/ToolMilling.py:3091 #: appPlugins/ToolMilling.py:3864 appPlugins/ToolNCC.py:1402 appPlugins/ToolNCC.py:1540 #: appPlugins/ToolPaint.py:1024 appPlugins/ToolPaint.py:1162 appPlugins/ToolPaint.py:1872 #: appPlugins/ToolSolderPaste.py:550 appPlugins/ToolSolderPaste.py:622 msgid "Wrong value format entered, use a number." msgstr "" #: appEditors/AppExcEditor.py:3034 msgid "" "Tool already in the original or actual tool list.\n" "Save and reedit Excellon if you need to add this tool. " msgstr "" #: appEditors/AppExcEditor.py:3042 appGUI/MainGUI.py:4260 msgid "Added new tool with dia" msgstr "" #: appEditors/AppExcEditor.py:3076 msgid "Select a tool in Tool Table" msgstr "" #: appEditors/AppExcEditor.py:3106 msgid "Deleted tool with diameter" msgstr "" #: appEditors/AppExcEditor.py:3868 msgid "There are no Tools definitions in the file. Aborting Excellon creation." msgstr "" #: appEditors/AppExcEditor.py:3872 appEditors/AppGerberEditor.py:5004 appMain.py:6733 #: appMain.py:8786 appMain.py:11497 appMain.py:11568 appMain.py:11764 appMain.py:11829 #: appObjects/AppObject.py:170 appObjects/GeometryObject.py:661 #: appParsers/ParseExcellon.py:976 appPlugins/ToolMilling.py:3025 #: appPlugins/ToolPcbWizard.py:343 appPlugins/ToolSolderPaste.py:1005 msgid "An internal error has occurred. See shell.\n" msgstr "" #: appEditors/AppExcEditor.py:3877 appObjects/GeometryObject.py:966 #: appObjects/GeometryObject.py:971 appObjects/GeometryObject.py:1129 #: appPlugins/ToolMilling.py:3494 appPlugins/ToolMilling.py:3498 appPlugins/ToolSub.py:468 #: appPlugins/ToolSub.py:663 msgid "Generating" msgstr "" #: appEditors/AppExcEditor.py:3899 msgid "Excellon editing finished." msgstr "" #: appEditors/AppExcEditor.py:3915 msgid "Cancelled. There is no Tool/Drill selected" msgstr "" #: appEditors/AppExcEditor.py:4718 appGUI/MainGUI.py:783 appGUI/ObjectUI.py:650 msgid "Excellon Editor" msgstr "" #: appEditors/AppExcEditor.py:4728 appEditors/AppGeoEditor.py:3093 #: appEditors/AppGerberEditor.py:6152 appEditors/appGCodeEditor.py:782 appGUI/ObjectUI.py:72 #: appPlugins/ToolCutOut.py:2249 appPlugins/ToolDblSided.py:711 #: appPlugins/ToolDrilling.py:2391 appPlugins/ToolFiducials.py:919 #: appPlugins/ToolFilm.py:1258 appPlugins/ToolFollow.py:687 appPlugins/ToolIsolation.py:3383 #: appPlugins/ToolLevelling.py:1753 appPlugins/ToolMarkers.py:1241 #: appPlugins/ToolMilling.py:3931 appPlugins/ToolNCC.py:4052 appPlugins/ToolPaint.py:2937 #: appPlugins/ToolPanelize.py:1152 appPlugins/ToolPunchGerber.py:2019 #: appPlugins/ToolQRCode.py:743 appPlugins/ToolSub.py:792 msgid "" "Beginner Mode - many parameters are hidden.\n" "Advanced Mode - full control.\n" "Permanent change is done in 'Preferences' menu." msgstr "" #: appEditors/AppExcEditor.py:4742 appEditors/AppGerberEditor.py:6164 #: appEditors/appGCodeEditor.py:794 msgid "Name:" msgstr "" #: appEditors/AppExcEditor.py:4749 appGUI/ObjectUI.py:287 appGUI/ObjectUI.py:694 #: appGUI/ObjectUI.py:1024 appGUI/ObjectUI.py:1036 appGUI/ObjectUI.py:1444 #: appPlugins/ToolDrilling.py:2432 appPlugins/ToolIsolation.py:3417 #: appPlugins/ToolMilling.py:4002 appPlugins/ToolNCC.py:4114 appPlugins/ToolPaint.py:2999 #: appPlugins/ToolSolderPaste.py:1284 msgid "Tools Table" msgstr "" #: appEditors/AppExcEditor.py:4751 msgid "" "Tools in this Excellon object\n" "when are used for drilling." msgstr "" #: appEditors/AppExcEditor.py:4772 msgid "Convert Slots" msgstr "" #: appEditors/AppExcEditor.py:4776 msgid "Convert the slots in the selected tools to drills." msgstr "" #: appEditors/AppExcEditor.py:4786 msgid "Add/Delete Tool" msgstr "" #: appEditors/AppExcEditor.py:4788 msgid "" "Add/Delete a tool to the tool list\n" "for this Excellon object." msgstr "" #: appEditors/AppExcEditor.py:4800 appEditors/geo_plugins/GeoPaintPlugin.py:242 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:44 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:127 appPlugins/ToolCutOut.py:2330 #: appPlugins/ToolCutOut.py:2516 appPlugins/ToolIsolation.py:3489 #: appPlugins/ToolMilling.py:4193 appPlugins/ToolNCC.py:4200 appPlugins/ToolNCC.py:4213 #: appPlugins/ToolPaint.py:3078 msgid "Tool Dia" msgstr "" #: appEditors/AppExcEditor.py:4802 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:55 #: appPlugins/ToolIsolation.py:3491 appPlugins/ToolMilling.py:4195 #: appPlugins/ToolNCC.py:4202 msgid "Diameter for the new tool" msgstr "" #: appEditors/AppExcEditor.py:4814 appEditors/AppGerberEditor.py:6298 #: appEditors/AppGerberEditor.py:6837 appEditors/exc_plugins/ExcCopyPlugin.py:441 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:322 #: appEditors/exc_plugins/ExcDrillPlugin.py:198 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:385 #: appEditors/exc_plugins/ExcSlotPlugin.py:262 appEditors/geo_plugins/GeoCirclePlugin.py:128 #: appEditors/geo_plugins/GeoCirclePlugin.py:264 appEditors/geo_plugins/GeoCopyPlugin.py:441 #: appEditors/geo_plugins/GeoRectanglePlugin.py:161 #: appEditors/geo_plugins/GeoRectanglePlugin.py:323 #: appEditors/geo_plugins/GeoTransformationPlugin.py:655 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:388 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:340 appMain.py:7250 #: appPlugins/ToolCopperThieving.py:1733 appPlugins/ToolDblSided.py:931 #: appPlugins/ToolLevelling.py:2081 appPlugins/ToolNCC.py:207 appPlugins/ToolPaint.py:203 #: appPlugins/ToolSolderPaste.py:121 appPlugins/ToolTransform.py:630 msgid "Add" msgstr "" #: appEditors/AppExcEditor.py:4817 msgid "" "Add a new tool to the tool list\n" "with the diameter specified above." msgstr "" #: appEditors/AppExcEditor.py:4826 msgid "Delete Tool" msgstr "" #: appEditors/AppExcEditor.py:4829 msgid "" "Delete a tool in the tool list\n" "by selecting a row in the tool table." msgstr "" #: appEditors/AppExcEditor.py:4843 appEditors/AppGeoEditor.py:3243 #: appEditors/AppGerberEditor.py:6759 appEditors/appGCodeEditor.py:74 #: appEditors/appGCodeEditor.py:75 appEditors/appGCodeEditor.py:889 appGUI/MainGUI.py:390 #: appGUI/MainGUI.py:1909 appMain.py:2747 msgid "Exit Editor" msgstr "" #: appEditors/AppExcEditor.py:4846 appEditors/AppGeoEditor.py:3246 #: appEditors/AppGerberEditor.py:6762 appEditors/appGCodeEditor.py:892 #: appGUI/MainGUI.py:1085 appGUI/MainGUI.py:2464 msgid "Exit from Editor." msgstr "" #: appEditors/AppGeoEditor.py:117 appEditors/AppGeoEditor.py:3553 msgid "Geo Elem" msgstr "" #: appEditors/AppGeoEditor.py:461 appEditors/AppGeoEditor.py:663 #: appEditors/geo_plugins/GeoCirclePlugin.py:112 #: appEditors/geo_plugins/GeoCirclePlugin.py:158 appGUI/MainGUI.py:1818 msgid "Circle" msgstr "" #: appEditors/AppGeoEditor.py:480 appEditors/AppGeoEditor.py:703 #: appEditors/AppGerberEditor.py:1667 appEditors/AppGerberEditor.py:1750 #: appEditors/geo_plugins/GeoCirclePlugin.py:88 msgid "Click on Center point ..." msgstr "" #: appEditors/AppGeoEditor.py:513 msgid "Click on Center point to add a new circle or Apply to change the selection." msgstr "" #: appEditors/AppGeoEditor.py:522 appEditors/AppGerberEditor.py:1677 msgid "Click on Perimeter point to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:731 appEditors/AppGerberEditor.py:1799 msgid "Click on Start point ..." msgstr "" #: appEditors/AppGeoEditor.py:733 appEditors/AppGerberEditor.py:1801 msgid "Click on Point3 ..." msgstr "" #: appEditors/AppGeoEditor.py:735 appEditors/AppGerberEditor.py:1803 msgid "Click on Stop point ..." msgstr "" #: appEditors/AppGeoEditor.py:740 appEditors/AppGerberEditor.py:1808 msgid "Click on Stop point to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:742 appEditors/AppGerberEditor.py:1810 msgid "Click on Point2 to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:744 appEditors/AppGerberEditor.py:1812 msgid "Click on Center point to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:756 appEditors/AppGerberEditor.py:1824 #: appEditors/AppGerberEditor.py:6675 appEditors/AppGerberEditor.py:6729 #: appEditors/exc_plugins/ExcCopyPlugin.py:234 appEditors/exc_plugins/ExcCopyPlugin.py:416 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:224 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:283 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:198 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:288 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:347 #: appEditors/exc_plugins/ExcSlotPlugin.py:207 appEditors/geo_plugins/GeoCopyPlugin.py:234 #: appEditors/geo_plugins/GeoCopyPlugin.py:416 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:201 msgid "Direction" msgstr "" #: appEditors/AppGeoEditor.py:770 appEditors/AppGerberEditor.py:1838 msgid "Mode: Start -> Stop -> Center. Click on Start point ..." msgstr "" #: appEditors/AppGeoEditor.py:773 appEditors/AppGerberEditor.py:1841 msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..." msgstr "" #: appEditors/AppGeoEditor.py:776 appEditors/AppGerberEditor.py:1844 msgid "Mode: Center -> Start -> Stop. Click on Center point ..." msgstr "" #: appEditors/AppGeoEditor.py:917 appGUI/MainGUI.py:1822 msgid "Arc" msgstr "" #: appEditors/AppGeoEditor.py:940 appEditors/AppGeoEditor.py:1025 #: appEditors/geo_plugins/GeoRectanglePlugin.py:145 #: appEditors/geo_plugins/GeoRectanglePlugin.py:191 appGUI/MainGUI.py:1815 msgid "Rectangle" msgstr "" #: appEditors/AppGeoEditor.py:959 appEditors/AppGeoEditor.py:1195 #: appEditors/AppGeoEditor.py:1307 appEditors/geo_plugins/GeoRectanglePlugin.py:90 msgid "Click on 1st corner ..." msgstr "" #: appEditors/AppGeoEditor.py:991 msgid "Click on 1st corner to add a new rectangle or Apply to change the selection." msgstr "" #: appEditors/AppGeoEditor.py:997 msgid "Click on opposite corner to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:1146 appEditors/AppGeoEditor.py:1357 #: appEditors/AppGeoEditor.py:1570 msgid "Projected" msgstr "" #: appEditors/AppGeoEditor.py:1147 msgid "Click to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:1174 appGUI/MainGUI.py:1820 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:450 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:336 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:470 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:327 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:291 appPlugins/ToolDrilling.py:2969 #: appPlugins/ToolFollow.py:747 appPlugins/ToolIsolation.py:3961 #: appPlugins/ToolMilling.py:5022 appPlugins/ToolNCC.py:4576 appPlugins/ToolPaint.py:3335 msgid "Polygon" msgstr "" #: appEditors/AppGeoEditor.py:1305 appEditors/AppGeoEditor.py:1510 #: appEditors/AppGerberEditor.py:1270 appEditors/AppGerberEditor.py:1524 msgid "Backtracked one point ..." msgstr "" #: appEditors/AppGeoEditor.py:1406 appEditors/AppGeoEditor.py:1512 #: appEditors/AppGeoEditor.py:2647 appEditors/AppGerberEditor.py:1019 msgid "Click on 1st point ..." msgstr "" #: appEditors/AppGeoEditor.py:1628 msgid "Selection not allowed. Wait ..." msgstr "" #: appEditors/AppGeoEditor.py:1733 appEditors/AppGeoEditor.py:1812 #: appEditors/AppGeoEditor.py:1857 appEditors/AppGeoEditor.py:2147 #: appEditors/AppGeoEditor.py:2192 appEditors/AppGeoEditor.py:2737 #: appEditors/AppGeoEditor.py:2763 appEditors/AppGeoEditor.py:2789 #: appEditors/AppGeoEditor.py:4661 appEditors/AppGerberEditor.py:7264 #: appEditors/AppGerberEditor.py:7304 appEditors/AppGerberEditor.py:7327 #: appEditors/AppGerberEditor.py:7472 appEditors/AppGerberEditor.py:7505 #: appEditors/AppGerberEditor.py:7548 appEditors/AppGerberEditor.py:7589 #: appEditors/AppGerberEditor.py:7625 appEditors/AppGerberEditor.py:7661 #: appEditors/geo_plugins/GeoPaintPlugin.py:103 #: appEditors/geo_plugins/GeoTransformationPlugin.py:130 #: appEditors/geo_plugins/GeoTransformationPlugin.py:155 #: appEditors/geo_plugins/GeoTransformationPlugin.py:178 #: appEditors/geo_plugins/GeoTransformationPlugin.py:318 #: appEditors/geo_plugins/GeoTransformationPlugin.py:343 #: appEditors/geo_plugins/GeoTransformationPlugin.py:378 #: appEditors/geo_plugins/GeoTransformationPlugin.py:413 #: appEditors/geo_plugins/GeoTransformationPlugin.py:444 #: appEditors/geo_plugins/GeoTransformationPlugin.py:469 msgid "No shape selected." msgstr "" #: appEditors/AppGeoEditor.py:1812 appEditors/AppGeoEditor.py:1857 #: appEditors/AppGeoEditor.py:2147 appEditors/AppGeoEditor.py:2192 msgid "Select some shapes or cancel." msgstr "" #: appEditors/AppGeoEditor.py:1821 appEditors/AppGeoEditor.py:1824 appGUI/MainGUI.py:757 #: appGUI/MainGUI.py:817 appGUI/MainGUI.py:875 appGUI/MainGUI.py:1243 appGUI/MainGUI.py:1350 #: appGUI/MainGUI.py:1852 appGUI/MainGUI.py:1918 appGUI/MainGUI.py:2620 #: appGUI/MainGUI.py:2719 appGUI/MainGUI.py:5377 appGUI/MainGUI.py:5517 #: appPlugins/ToolMove.py:20 msgid "Move" msgstr "" #: appEditors/AppGeoEditor.py:1831 appEditors/AppGeoEditor.py:2166 msgid "Click on destination point ..." msgstr "" #: appEditors/AppGeoEditor.py:1880 appPlugins/ToolMove.py:192 msgid "Moving" msgstr "" #: appEditors/AppGeoEditor.py:2156 appEditors/AppGeoEditor.py:2159 appGUI/GUIElements.py:455 #: appGUI/GUIElements.py:1231 appGUI/GUIElements.py:1475 appGUI/GUIElements.py:1916 #: appGUI/GUIElements.py:2204 appGUI/GUIElements.py:4473 appGUI/MainGUI.py:461 #: appGUI/MainGUI.py:808 appGUI/MainGUI.py:867 appGUI/MainGUI.py:948 appGUI/MainGUI.py:1091 #: appGUI/MainGUI.py:1237 appGUI/MainGUI.py:1343 appGUI/MainGUI.py:1903 #: appGUI/MainGUI.py:2470 appGUI/MainGUI.py:2614 appGUI/MainGUI.py:2712 #: appGUI/MainGUI.py:5374 appGUI/MainGUI.py:5513 appObjects/ExcellonObject.py:516 #: appPlugins/ToolDrilling.py:287 appPlugins/ToolMilling.py:402 #: appPlugins/ToolMilling.py:413 appPlugins/ToolPanelize.py:445 #: appPlugins/ToolPanelize.py:474 appPlugins/ToolPanelize.py:600 #: appPlugins/ToolPanelize.py:611 appPlugins/ToolPanelize.py:649 #: appPlugins/ToolPanelize.py:698 appPlugins/ToolPanelize.py:912 #: appPlugins/ToolPanelize.py:951 appPlugins/ToolPanelize.py:999 msgid "Copy" msgstr "" #: appEditors/AppGeoEditor.py:2671 msgid "Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. Error" msgstr "" #: appEditors/AppGeoEditor.py:2679 msgid "No text to add." msgstr "" #: appEditors/AppGeoEditor.py:2726 msgid "Create buffer geometry ..." msgstr "" #: appEditors/AppGeoEditor.py:2730 appEditors/AppGerberEditor.py:6490 #: appEditors/AppGerberEditor.py:6784 appEditors/geo_plugins/GeoBufferPlugin.py:64 #: appEditors/geo_plugins/GeoBufferPlugin.py:345 #: appEditors/geo_plugins/GeoTransformationPlugin.py:604 appGUI/MainGUI.py:760 #: appGUI/MainGUI.py:850 appGUI/MainGUI.py:1330 appGUI/MainGUI.py:1830 #: appGUI/MainGUI.py:1875 appGUI/MainGUI.py:2699 appGUI/MainGUI.py:5512 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:257 appPlugins/ToolTransform.py:569 #: appPlugins/ToolTransform.py:939 msgid "Buffer" msgstr "" #: appEditors/AppGeoEditor.py:2749 appEditors/AppGeoEditor.py:2775 #: appEditors/AppGeoEditor.py:2801 appEditors/AppGerberEditor.py:5935 #: appEditors/geo_plugins/GeoBufferPlugin.py:84 #: appEditors/geo_plugins/GeoBufferPlugin.py:101 #: appEditors/geo_plugins/GeoBufferPlugin.py:118 msgid "Buffer distance value is missing or wrong format. Add it and retry." msgstr "" #: appEditors/AppGeoEditor.py:2849 msgid "Simplify geometry ..." msgstr "" #: appEditors/AppGeoEditor.py:2886 appEditors/AppGerberEditor.py:2407 msgid "Select a shape to act as deletion area ..." msgstr "" #: appEditors/AppGeoEditor.py:2888 appEditors/AppGeoEditor.py:2914 #: appEditors/AppGeoEditor.py:2920 appEditors/AppGerberEditor.py:2409 msgid "Click to pick-up the erase shape..." msgstr "" #: appEditors/AppGeoEditor.py:2918 msgid "Nothing to erase." msgstr "" #: appEditors/AppGeoEditor.py:2924 appEditors/AppGerberEditor.py:2469 msgid "Click to erase ..." msgstr "" #: appEditors/AppGeoEditor.py:3003 msgid "Create Paint geometry ..." msgstr "" #: appEditors/AppGeoEditor.py:3019 appEditors/AppGerberEditor.py:3270 msgid "Shape transformations ..." msgstr "" #: appEditors/AppGeoEditor.py:3085 appGUI/ObjectUI.py:980 msgid "Geometry Editor" msgstr "" #: appEditors/AppGeoEditor.py:3106 msgid "Tool dia" msgstr "" #: appEditors/AppGeoEditor.py:3108 msgid "Edited tool diameter." msgstr "" #: appEditors/AppGeoEditor.py:3118 msgid "Geometry Table" msgstr "" #: appEditors/AppGeoEditor.py:3120 msgid "The list of geometry elements inside the edited object." msgstr "" #: appEditors/AppGeoEditor.py:3126 appEditors/AppGerberEditor.py:4601 #: appEditors/AppGerberEditor.py:6190 appEditors/AppGerberEditor.py:6263 #: appEditors/AppGerberEditor.py:6642 appEditors/exc_plugins/ExcCopyPlugin.py:202 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:183 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:248 #: appEditors/geo_plugins/GeoCopyPlugin.py:202 #: appEditors/geo_plugins/GeoRectanglePlugin.py:275 appGUI/ObjectUI.py:334 #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:56 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:167 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:57 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:116 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:40 #: appPlugins/ToolCopperThieving.py:1374 appPlugins/ToolCutOut.py:2293 #: appPlugins/ToolCutOut.py:2479 appPlugins/ToolDblSided.py:1058 #: appPlugins/ToolExtract.py:1107 appPlugins/ToolFilm.py:1286 appPlugins/ToolFilm.py:1357 #: appPlugins/ToolFilm.py:1427 appPlugins/ToolImage.py:600 appPlugins/ToolIsolation.py:3902 #: appPlugins/ToolMarkers.py:1294 appPlugins/ToolMarkers.py:1574 #: appPlugins/ToolMilling.py:3963 appPlugins/ToolNCC.py:4080 appPlugins/ToolNCC.py:4547 #: appPlugins/ToolObjectDistance.py:461 appPlugins/ToolPaint.py:2965 #: appPlugins/ToolPaint.py:3305 appPlugins/ToolPunchGerber.py:2120 #: appPlugins/ToolPunchGerber.py:2331 appPlugins/ToolTransform.py:637 msgid "Type" msgstr "" #: appEditors/AppGeoEditor.py:3149 appEditors/AppGerberEditor.py:6328 msgid "Zoom on selection" msgstr "" #: appEditors/AppGeoEditor.py:3158 appEditors/AppGerberEditor.py:6337 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:170 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:232 #: appEditors/exc_plugins/ExcSlotPlugin.py:177 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:232 appGUI/ObjectUI.py:1372 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:26 #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:28 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:25 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:27 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:411 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:79 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:25 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:27 #: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:28 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:29 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:137 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:28 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:27 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:27 #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:27 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:27 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:26 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:28 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:183 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:25 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:25 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:27 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:28 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:26 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:28 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:27 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:28 #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:24 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:28 #: appPlugins/ToolAlignObjects.py:495 appPlugins/ToolCopperThieving.py:1299 #: appPlugins/ToolDistance.py:825 appPlugins/ToolEtchCompensation.py:392 #: appPlugins/ToolFiducials.py:1051 appPlugins/ToolFilm.py:1517 appPlugins/ToolFollow.py:716 #: appPlugins/ToolImage.py:529 appPlugins/ToolImage.py:861 #: appPlugins/ToolInvertGerber.py:244 appPlugins/ToolLevelling.py:1839 #: appPlugins/ToolMarkers.py:1283 appPlugins/ToolObjectDistance.py:447 #: appPlugins/ToolOptimal.py:511 appPlugins/ToolPanelize.py:1334 #: appPlugins/ToolQRCode.py:801 appPlugins/ToolSolderPaste.py:1354 appPlugins/ToolSub.py:810 #: appPlugins/ToolTransform.py:593 msgid "Parameters" msgstr "" #: appEditors/AppGeoEditor.py:3160 appEditors/AppGerberEditor.py:6339 msgid "Geometry parameters." msgstr "" #: appEditors/AppGeoEditor.py:3165 msgid "Is Valid" msgstr "" #: appEditors/AppGeoEditor.py:3172 msgid "Is Empty" msgstr "" #: appEditors/AppGeoEditor.py:3179 msgid "Is Ring" msgstr "" #: appEditors/AppGeoEditor.py:3186 msgid "Is CCW" msgstr "" #: appEditors/AppGeoEditor.py:3188 appEditors/AppGeoEditor.py:3780 msgid "Change" msgstr "" #: appEditors/AppGeoEditor.py:3191 msgid "" "Change the orientation of the geometric element.\n" "Works for LinearRing and Polygons." msgstr "" #: appEditors/AppGeoEditor.py:3199 msgid "Is Simple" msgstr "" #: appEditors/AppGeoEditor.py:3206 appEditors/exc_plugins/ExcCopyPlugin.py:150 #: appEditors/exc_plugins/ExcDrillPlugin.py:186 appEditors/exc_plugins/ExcSlotPlugin.py:250 #: appEditors/geo_plugins/GeoCopyPlugin.py:150 appEditors/geo_plugins/GeoPathPlugin.py:131 #: appEditors/geo_plugins/GeoRectanglePlugin.py:311 msgid "Projection" msgstr "" #: appEditors/AppGeoEditor.py:3208 msgid "The length of the geometry element." msgstr "" #: appEditors/AppGeoEditor.py:3217 appEditors/AppGerberEditor.py:6371 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:199 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:83 appPlugins/ToolDistance.py:856 #: appPlugins/ToolFiducials.py:957 appPlugins/ToolFiducials.py:973 #: appPlugins/ToolMarkers.py:1468 appPlugins/ToolObjectDistance.py:476 msgid "Coordinates" msgstr "" #: appEditors/AppGeoEditor.py:3219 appEditors/AppGeoEditor.py:3225 #: appEditors/AppGerberEditor.py:6373 appEditors/AppGerberEditor.py:6379 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:201 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:216 msgid "The coordinates of the selected geometry element." msgstr "" #: appEditors/AppGeoEditor.py:3230 appEditors/AppGerberEditor.py:6384 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:221 msgid "Vertex Points" msgstr "" #: appEditors/AppGeoEditor.py:3232 appEditors/AppGerberEditor.py:6386 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:223 msgid "The number of vertex points in the selected geometry element." msgstr "" #: appEditors/AppGeoEditor.py:3542 msgid "Multi-Line" msgstr "" #: appEditors/AppGeoEditor.py:3544 msgid "Multi-Polygon" msgstr "" #: appEditors/AppGeoEditor.py:3681 msgid "Last selected shape ID" msgstr "" #: appEditors/AppGeoEditor.py:3740 appEditors/AppGerberEditor.py:2681 #: appEditors/AppGerberEditor.py:5012 appPlugins/ToolCutOut.py:1485 #: appPlugins/ToolDistance.py:250 appPlugins/ToolExtract.py:434 #: appPlugins/ToolExtract.py:807 appPlugins/ToolExtract.py:882 appPlugins/ToolOptimal.py:216 #: appPlugins/ToolPanelize.py:1102 appPlugins/ToolQRCode.py:235 appPlugins/ToolReport.py:211 #: appPlugins/ToolSolderPaste.py:765 appPlugins/ToolSolderPaste.py:1077 #: appPlugins/ToolSub.py:312 tclCommands/TclCommandOpenSVG.py:85 #: tclCommands/TclCommandPanelize.py:425 msgid "Working" msgstr "" #: appEditors/AppGeoEditor.py:4176 msgid "Error on inserting shapes into storage." msgstr "" #: appEditors/AppGeoEditor.py:4265 msgid "Grid Snap enabled." msgstr "" #: appEditors/AppGeoEditor.py:4269 msgid "Grid Snap disabled." msgstr "" #: appEditors/AppGeoEditor.py:4668 appGUI/MainGUI.py:3894 appGUI/MainGUI.py:3941 #: appGUI/MainGUI.py:3960 appGUI/MainGUI.py:4149 appGUI/MainGUI.py:4187 #: appGUI/MainGUI.py:4200 msgid "Click on target point." msgstr "" #: appEditors/AppGeoEditor.py:4939 appEditors/AppGeoEditor.py:5003 #: appEditors/AppGeoEditor.py:5071 appEditors/AppGeoEditor.py:5101 #: appEditors/AppGeoEditor.py:5154 appEditors/AppGeoEditor.py:5209 #: appEditors/AppGeoEditor.py:5237 appEditors/AppGeoEditor.py:5262 #: appEditors/geo_plugins/GeoBufferPlugin.py:127 #: appEditors/geo_plugins/GeoBufferPlugin.py:207 #: appEditors/geo_plugins/GeoBufferPlugin.py:273 #: appEditors/geo_plugins/GeoPaintPlugin.py:123 appPlugins/ToolCopperThieving.py:626 #: appPlugins/ToolFilm.py:692 appPlugins/ToolFilm.py:915 appPlugins/ToolRulesCheck.py:644 msgid "Working..." msgstr "" #: appEditors/AppGeoEditor.py:4940 msgid "Loading the Geometry into the Editor..." msgstr "" #: appEditors/AppGeoEditor.py:4979 msgid "Editing MultiGeo Geometry, tool" msgstr "" #: appEditors/AppGeoEditor.py:4981 appPlugins/ToolNCC.py:2485 msgid "with diameter" msgstr "" #: appEditors/AppGeoEditor.py:5050 msgid "Editor Exit. Geometry object was updated ..." msgstr "" #: appEditors/AppGeoEditor.py:5106 appEditors/AppGeoEditor.py:5161 msgid "A selection of minimum two items is required to do Intersection." msgstr "" #: appEditors/AppGerberEditor.py:212 appEditors/AppGerberEditor.py:418 #: appEditors/AppGerberEditor.py:1347 msgid "You need to preselect a aperture in the Aperture Table that has a size." msgstr "" #: appEditors/AppGerberEditor.py:225 appEditors/AppGerberEditor.py:428 msgid "Aperture size is zero. It needs to be greater than zero." msgstr "" #: appEditors/AppGerberEditor.py:378 appEditors/AppGerberEditor.py:734 msgid "Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'." msgstr "" #: appEditors/AppGerberEditor.py:500 msgid "Click on the Pad Circular Array Start position" msgstr "" #: appEditors/AppGerberEditor.py:535 msgid "The value is not Float. Check for comma instead of dot separator." msgstr "" #: appEditors/AppGerberEditor.py:538 msgid "The value is mistyped. Check the value." msgstr "" #: appEditors/AppGerberEditor.py:864 msgid "Select shape(s) and then click ..." msgstr "" #: appEditors/AppGerberEditor.py:876 msgid "Failed. Nothing selected." msgstr "" #: appEditors/AppGerberEditor.py:892 msgid "Failed. Poligonize works only on geometries belonging to the same aperture." msgstr "" #: appEditors/AppGerberEditor.py:1017 appEditors/AppGerberEditor.py:1287 #: appEditors/AppGerberEditor.py:1311 msgid "Corner Mode 1: 45 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1275 appEditors/AppGerberEditor.py:1308 msgid "Corner Mode 2: Reverse 45 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1278 appEditors/AppGerberEditor.py:1305 msgid "Corner Mode 3: 90 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1281 appEditors/AppGerberEditor.py:1302 msgid "Corner Mode 4: Reverse 90 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1284 appEditors/AppGerberEditor.py:1299 msgid "Corner Mode 5: Free angle ..." msgstr "" #: appEditors/AppGerberEditor.py:1379 appEditors/AppGerberEditor.py:1564 #: appEditors/AppGerberEditor.py:1603 msgid "Track Mode 1: 45 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1544 appEditors/AppGerberEditor.py:1598 msgid "Track Mode 2: Reverse 45 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1549 appEditors/AppGerberEditor.py:1593 msgid "Track Mode 3: 90 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1554 appEditors/AppGerberEditor.py:1588 msgid "Track Mode 4: Reverse 90 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1559 appEditors/AppGerberEditor.py:1583 msgid "Track Mode 5: Free angle ..." msgstr "" #: appEditors/AppGerberEditor.py:2035 msgid "Scale the selected Gerber apertures ..." msgstr "" #: appEditors/AppGerberEditor.py:2077 msgid "Buffer the selected apertures ..." msgstr "" #: appEditors/AppGerberEditor.py:2119 msgid "Mark polygon areas in the edited Gerber ..." msgstr "" #: appEditors/AppGerberEditor.py:2185 msgid "Nothing selected to move" msgstr "" #: appEditors/AppGerberEditor.py:2861 msgid "Select shapes to import them into the edited object." msgstr "" #: appEditors/AppGerberEditor.py:3090 appEditors/AppGerberEditor.py:3172 #: appPlugins/ToolIsolation.py:2531 appPlugins/ToolIsolation.py:2696 #: appPlugins/ToolPaint.py:1263 msgid "Added polygon" msgstr "" #: appEditors/AppGerberEditor.py:3092 appEditors/AppGerberEditor.py:3174 #: appPlugins/ToolIsolation.py:2532 appPlugins/ToolIsolation.py:2698 #: appPlugins/ToolPaint.py:1265 msgid "Click to add next polygon or right click to start." msgstr "" #: appEditors/AppGerberEditor.py:3095 appEditors/AppGerberEditor.py:3177 #: appPlugins/ToolIsolation.py:2701 msgid "No polygon in selection." msgstr "" #: appEditors/AppGerberEditor.py:3779 appEditors/AppGerberEditor.py:3783 msgid "Aperture code value is missing or wrong format. Add it and retry." msgstr "" #: appEditors/AppGerberEditor.py:3795 msgid "Aperture size value is missing or wrong format. Add it and retry." msgstr "" #: appEditors/AppGerberEditor.py:3814 appEditors/AppGerberEditor.py:3855 msgid "Aperture already in the aperture table." msgstr "" #: appEditors/AppGerberEditor.py:3841 msgid "" "Aperture dimensions value is missing or wrong format. Add it in format (width, height) " "and retry." msgstr "" #: appEditors/AppGerberEditor.py:3862 msgid "Added new aperture with code" msgstr "" #: appEditors/AppGerberEditor.py:3897 msgid "Select an aperture in Aperture Table" msgstr "" #: appEditors/AppGerberEditor.py:3905 msgid "Select an aperture in Aperture Table -->" msgstr "" #: appEditors/AppGerberEditor.py:3923 msgid "Deleted aperture with code" msgstr "" #: appEditors/AppGerberEditor.py:3993 msgid "Dimensions need two float values separated by comma." msgstr "" #: appEditors/AppGerberEditor.py:4002 msgid "Dimensions edited." msgstr "" #: appEditors/AppGerberEditor.py:4136 appEditors/AppGerberEditor.py:6422 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:97 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:258 appGUI/MainGUI.py:1266 #: appGUI/ObjectUI.py:1237 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:76 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:299 appObjects/GeometryObject.py:521 #: appPlugins/ToolIsolation.py:3830 msgid "Simplify" msgstr "" #: appEditors/AppGerberEditor.py:4601 appEditors/AppGerberEditor.py:6190 #: appEditors/AppGerberEditor.py:6235 appGUI/ObjectUI.py:334 appPlugins/ToolExtract.py:1107 #: appPlugins/ToolPunchGerber.py:2120 msgid "Code" msgstr "" #: appEditors/AppGerberEditor.py:4601 appEditors/AppGerberEditor.py:6190 #: appEditors/exc_plugins/ExcCopyPlugin.py:192 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:198 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:262 #: appEditors/geo_plugins/GeoCopyPlugin.py:192 #: appEditors/geo_plugins/GeoRectanglePlugin.py:299 #: appEditors/geo_plugins/GeoTextPlugin.py:259 appGUI/ObjectUI.py:334 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:110 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:195 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:234 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:40 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:150 #: appPlugins/ToolCopperThieving.py:1502 appPlugins/ToolCopperThieving.py:1548 #: appPlugins/ToolCutOut.py:2463 appPlugins/ToolExtract.py:1107 #: appPlugins/ToolFiducials.py:1064 appPlugins/ToolPunchGerber.py:2120 msgid "Size" msgstr "" #: appEditors/AppGerberEditor.py:4601 appEditors/AppGerberEditor.py:6190 #: appGUI/ObjectUI.py:334 msgid "Dim" msgstr "" #: appEditors/AppGerberEditor.py:4720 appMain.py:8240 appObjects/CNCJobObject.py:779 #: appObjects/FlatCAMScript.py:131 appPlugins/ToolLevelling.py:1500 msgid "Loading" msgstr "" #: appEditors/AppGerberEditor.py:4860 msgid "Setting up the UI" msgstr "" #: appEditors/AppGerberEditor.py:4861 msgid "Adding geometry finished. Preparing the GUI" msgstr "" #: appEditors/AppGerberEditor.py:4870 msgid "Finished loading the Gerber object into the editor." msgstr "" #: appEditors/AppGerberEditor.py:5002 msgid "There are no Aperture definitions in the file. Aborting Gerber creation." msgstr "" #: appEditors/AppGerberEditor.py:5040 msgid "No aperture is selected." msgstr "" #: appEditors/AppGerberEditor.py:5261 appMain.py:7623 appMain.py:7645 #: appObjects/ExcellonObject.py:552 appPlugins/ToolDrilling.py:1698 #: appPlugins/ToolMilling.py:3784 msgid "Copied to clipboard." msgstr "" #: appEditors/AppGerberEditor.py:5609 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:366 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:340 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:305 appMain.py:5360 #: appObjects/AppObject.py:353 appObjects/AppObjectTemplate.py:187 #: appObjects/AppObjectTemplate.py:361 appObjects/AppObjectTemplate.py:392 #: appObjects/AppObjectTemplate.py:408 appObjects/CNCJobObject.py:685 #: appObjects/GerberObject.py:1039 appPlugins/ToolCopperThieving.py:1155 #: appPlugins/ToolFiducials.py:706 appPlugins/ToolMarkers.py:1077 appPlugins/ToolMove.py:163 #: appPlugins/ToolQRCode.py:539 msgid "Plotting" msgstr "" #: appEditors/AppGerberEditor.py:5789 msgid "Failed. No aperture geometry is selected." msgstr "" #: appEditors/AppGerberEditor.py:5883 appEditors/exc_plugins/ExcCopyPlugin.py:512 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:357 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:421 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:441 #: appEditors/geo_plugins/GeoCopyPlugin.py:512 msgid "Click on the circular array Center position" msgstr "" #: appEditors/AppGerberEditor.py:5964 msgid "No aperture to buffer. Select at least one aperture and try again." msgstr "" #: appEditors/AppGerberEditor.py:5995 msgid "Scale factor value is missing or wrong format. Add it and retry." msgstr "" #: appEditors/AppGerberEditor.py:6027 msgid "No aperture to scale. Select at least one aperture and try again." msgstr "" #: appEditors/AppGerberEditor.py:6079 msgid "Polygons marked." msgstr "" #: appEditors/AppGerberEditor.py:6081 msgid "No polygons were marked. None fit within the limits." msgstr "" #: appEditors/AppGerberEditor.py:6144 appGUI/MainGUI.py:822 appGUI/MainGUI.py:1855 #: appGUI/ObjectUI.py:244 msgid "Gerber Editor" msgstr "" #: appEditors/AppGerberEditor.py:6177 appGUI/ObjectUI.py:299 #: appObjects/AppObjectTemplate.py:549 appPlugins/ToolReport.py:174 msgid "Apertures" msgstr "" #: appEditors/AppGerberEditor.py:6179 appGUI/ObjectUI.py:301 msgid "Apertures Table for the Gerber Object." msgstr "" #: appEditors/AppGerberEditor.py:6195 appGUI/ObjectUI.py:338 msgid "Index" msgstr "" #: appEditors/AppGerberEditor.py:6197 appGUI/ObjectUI.py:340 appPlugins/ToolExtract.py:1114 #: appPlugins/ToolPunchGerber.py:2127 msgid "Aperture Code" msgstr "" #: appEditors/AppGerberEditor.py:6199 appGUI/ObjectUI.py:342 appPlugins/ToolExtract.py:1116 #: appPlugins/ToolPunchGerber.py:2129 msgid "Type of aperture: circular, rectangle, macros etc" msgstr "" #: appEditors/AppGerberEditor.py:6201 appGUI/ObjectUI.py:344 appPlugins/ToolExtract.py:1118 #: appPlugins/ToolPunchGerber.py:2131 msgid "Aperture Size:" msgstr "" #: appEditors/AppGerberEditor.py:6203 appGUI/ObjectUI.py:346 msgid "" "Aperture Dimensions:\n" " - (width, height) for R, O type.\n" " - (dia, nVertices) for P type" msgstr "" #: appEditors/AppGerberEditor.py:6228 msgid "Add/Delete Aperture" msgstr "" #: appEditors/AppGerberEditor.py:6230 msgid "Add/Delete an aperture in the aperture table" msgstr "" #: appEditors/AppGerberEditor.py:6236 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:59 msgid "Code for the new aperture" msgstr "" #: appEditors/AppGerberEditor.py:6246 msgid "Size:" msgstr "" #: appEditors/AppGerberEditor.py:6248 msgid "" "Size for the new aperture.\n" "If aperture type is 'R' or 'O' then\n" "this value is automatically\n" "calculated as:\n" "sqrt(width**2 + height**2)" msgstr "" #: appEditors/AppGerberEditor.py:6265 msgid "" "Select the type of new aperture. Can be:\n" "C = circular\n" "R = rectangular\n" "O = oblong" msgstr "" #: appEditors/AppGerberEditor.py:6278 msgid "Dims" msgstr "" #: appEditors/AppGerberEditor.py:6280 msgid "" "Dimensions for the new aperture.\n" "The format is (width, height)" msgstr "" #: appEditors/AppGerberEditor.py:6302 msgid "Add a new aperture to the aperture list." msgstr "" #: appEditors/AppGerberEditor.py:6311 msgid "Delete a aperture in the aperture list" msgstr "" #: appEditors/AppGerberEditor.py:6346 msgid "Valid" msgstr "" #: appEditors/AppGerberEditor.py:6348 msgid "Show if the selected polygon is valid." msgstr "" #: appEditors/AppGerberEditor.py:6355 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:83 #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:124 #: appPlugins/ToolCalculators.py:692 appPlugins/ToolCalculators.py:736 #: appPlugins/ToolCopperThieving.py:1339 msgid "Area" msgstr "" #: appEditors/AppGerberEditor.py:6357 msgid "Show the area of the selected polygon." msgstr "" #: appEditors/AppGerberEditor.py:6361 #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:46 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:198 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:45 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:41 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:102 appPlugins/ToolCalculators.py:545 #: appPlugins/ToolCopperThieving.py:1351 appPlugins/ToolImage.py:574 #: appPlugins/ToolPcbWizard.py:486 msgid "mm" msgstr "" #: appEditors/AppGerberEditor.py:6361 appPlugins/ToolCopperThieving.py:1353 #: appPlugins/ToolCopperThieving.py:1726 appPlugins/ToolImage.py:574 msgid "in" msgstr "" #: appEditors/AppGerberEditor.py:6400 appEditors/geo_plugins/GeoSimplificationPlugin.py:167 #: appGUI/MainGUI.py:764 appGUI/MainGUI.py:1828 appGUI/ObjectUI.py:1185 msgid "Simplification" msgstr "" #: appEditors/AppGerberEditor.py:6402 appGUI/ObjectUI.py:1187 msgid "Simplify a geometry by reducing its vertex points number." msgstr "" #: appEditors/AppGerberEditor.py:6407 appEditors/geo_plugins/GeoSimplificationPlugin.py:244 #: appGUI/ObjectUI.py:1223 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:85 msgid "Tolerance" msgstr "" #: appEditors/AppGerberEditor.py:6409 appEditors/geo_plugins/GeoSimplificationPlugin.py:246 #: appGUI/ObjectUI.py:1225 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:301 #: appPlugins/ToolIsolation.py:3832 msgid "" "All points in the simplified object will be\n" "within the tolerance distance of the original geometry." msgstr "" #: appEditors/AppGerberEditor.py:6425 appEditors/geo_plugins/GeoSimplificationPlugin.py:261 #: appGUI/ObjectUI.py:1240 msgid "Simplify a geometry element by reducing its vertex points number." msgstr "" #: appEditors/AppGerberEditor.py:6448 msgid "Buffer Aperture" msgstr "" #: appEditors/AppGerberEditor.py:6450 msgid "Buffer a aperture in the aperture list" msgstr "" #: appEditors/AppGerberEditor.py:6463 appEditors/geo_plugins/GeoBufferPlugin.py:379 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:226 msgid "Buffer distance" msgstr "" #: appEditors/AppGerberEditor.py:6467 appEditors/geo_plugins/GeoBufferPlugin.py:382 msgid "Buffer corner" msgstr "" #: appEditors/AppGerberEditor.py:6469 msgid "" "There are 3 types of corners:\n" " - 'Round': the corner is rounded.\n" " - 'Square': the corner is met in a sharp angle.\n" " - 'Beveled': the corner is a line that directly connects the features meeting in the " "corner" msgstr "" #: appEditors/AppGerberEditor.py:6475 appEditors/geo_plugins/GeoBufferPlugin.py:390 #: appEditors/geo_plugins/GeoRectanglePlugin.py:283 msgid "Round" msgstr "" #: appEditors/AppGerberEditor.py:6476 appEditors/geo_plugins/GeoBufferPlugin.py:391 #: appEditors/geo_plugins/GeoRectanglePlugin.py:284 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:59 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:188 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:77 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:59 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:185 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:140 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:449 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:335 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:469 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:326 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290 appPlugins/ToolDrilling.py:2968 #: appPlugins/ToolExtract.py:1079 appPlugins/ToolExtract.py:1224 #: appPlugins/ToolFollow.py:746 appPlugins/ToolInvertGerber.py:279 #: appPlugins/ToolIsolation.py:3960 appPlugins/ToolMilling.py:5021 #: appPlugins/ToolNCC.py:4575 appPlugins/ToolPaint.py:3334 #: appPlugins/ToolPunchGerber.py:2092 appPlugins/ToolPunchGerber.py:2258 #: appPlugins/ToolQRCode.py:901 msgid "Square" msgstr "" #: appEditors/AppGerberEditor.py:6477 appEditors/geo_plugins/GeoBufferPlugin.py:392 #: appEditors/geo_plugins/GeoRectanglePlugin.py:285 msgid "Beveled" msgstr "" #: appEditors/AppGerberEditor.py:6506 msgid "Scale Aperture" msgstr "" #: appEditors/AppGerberEditor.py:6508 msgid "Scale a aperture in the aperture list" msgstr "" #: appEditors/AppGerberEditor.py:6516 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:251 msgid "Scale factor" msgstr "" #: appEditors/AppGerberEditor.py:6518 msgid "" "The factor by which to scale the selected aperture.\n" "Values can be between 0.0000 and 999.9999" msgstr "" #: appEditors/AppGerberEditor.py:6534 appEditors/AppGerberEditor.py:6781 #: appEditors/geo_plugins/GeoTransformationPlugin.py:601 appGUI/MainGUI.py:853 #: appGUI/MainGUI.py:1332 appGUI/MainGUI.py:1877 appGUI/MainGUI.py:2701 #: appGUI/MainGUI.py:5521 appGUI/ObjectUI.py:121 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:42 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:171 appPlugins/ToolFilm.py:1349 #: appPlugins/ToolTransform.py:566 appPlugins/ToolTransform.py:788 msgid "Scale" msgstr "" #: appEditors/AppGerberEditor.py:6555 msgid "Mark polygons" msgstr "" #: appEditors/AppGerberEditor.py:6557 msgid "Mark the polygon areas." msgstr "" #: appEditors/AppGerberEditor.py:6566 msgid "Area UPPER threshold" msgstr "" #: appEditors/AppGerberEditor.py:6568 msgid "" "The threshold value, all areas less than this are marked.\n" "Can have a value between 0.0000 and 10000.0000" msgstr "" #: appEditors/AppGerberEditor.py:6579 msgid "Area LOWER threshold" msgstr "" #: appEditors/AppGerberEditor.py:6581 msgid "" "The threshold value, all areas more than this are marked.\n" "Can have a value between 0.0000 and 10000.0000" msgstr "" #: appEditors/AppGerberEditor.py:6595 msgid "Mark" msgstr "" #: appEditors/AppGerberEditor.py:6598 msgid "Mark the polygons that fit within limits." msgstr "" #: appEditors/AppGerberEditor.py:6605 msgid "Delete all the marked polygons." msgstr "" #: appEditors/AppGerberEditor.py:6612 msgid "Clear all the markings." msgstr "" #: appEditors/AppGerberEditor.py:6635 appGUI/MainGUI.py:830 appGUI/MainGUI.py:1315 #: appGUI/MainGUI.py:2684 appGUI/MainGUI.py:5511 msgid "Add Pad Array" msgstr "" #: appEditors/AppGerberEditor.py:6637 msgid "Add an array of pads (linear or circular array)" msgstr "" #: appEditors/AppGerberEditor.py:6644 msgid "" "Select the type of pads array to create.\n" "It can be Linear X(Y) or Circular" msgstr "" #: appEditors/AppGerberEditor.py:6648 appEditors/exc_plugins/ExcCopyPlugin.py:209 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:190 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:255 #: appEditors/geo_plugins/GeoCopyPlugin.py:209 msgid "Linear" msgstr "" #: appEditors/AppGerberEditor.py:6649 appEditors/exc_plugins/ExcCopyPlugin.py:211 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:191 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:256 #: appEditors/geo_plugins/GeoCopyPlugin.py:211 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:43 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:162 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:99 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:43 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:159 #: appPlugins/ToolExtract.py:1063 appPlugins/ToolExtract.py:1198 #: appPlugins/ToolFiducials.py:1123 appPlugins/ToolPunchGerber.py:2076 #: appPlugins/ToolPunchGerber.py:2232 msgid "Circular" msgstr "" #: appEditors/AppGerberEditor.py:6655 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:96 msgid "Nr of pads" msgstr "" #: appEditors/AppGerberEditor.py:6657 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:98 msgid "Specify how many pads to be in the array." msgstr "" #: appEditors/AppGerberEditor.py:6677 appEditors/exc_plugins/ExcCopyPlugin.py:236 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:226 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:290 #: appEditors/geo_plugins/GeoCopyPlugin.py:236 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:93 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:263 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:134 msgid "" "Direction on which the linear array is oriented:\n" "- 'X' - horizontal axis \n" "- 'Y' - vertical axis or \n" "- 'Angle' - a custom angle for the array inclination" msgstr "" #: appEditors/AppGerberEditor.py:6683 appEditors/exc_plugins/ExcCopyPlugin.py:243 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:154 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:233 #: appEditors/exc_plugins/ExcDrillPlugin.py:161 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:152 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:206 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:297 #: appEditors/exc_plugins/ExcSlotPlugin.py:161 appEditors/exc_plugins/ExcSlotPlugin.py:215 #: appEditors/geo_plugins/GeoCirclePlugin.py:203 appEditors/geo_plugins/GeoCopyPlugin.py:243 #: appEditors/geo_plugins/GeoRectanglePlugin.py:248 appGUI/GUIElements.py:5326 #: appGUI/MainGUI.py:528 appGUI/MainGUI.py:744 appGUI/MainGUI.py:5001 appGUI/MainGUI.py:5269 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:99 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:210 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:269 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:140 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:166 appPlugins/ToolFilm.py:1496 msgid "X" msgstr "" #: appEditors/AppGerberEditor.py:6684 appEditors/exc_plugins/ExcCopyPlugin.py:244 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:162 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:234 #: appEditors/exc_plugins/ExcDrillPlugin.py:169 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:160 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:207 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:298 #: appEditors/exc_plugins/ExcSlotPlugin.py:169 appEditors/exc_plugins/ExcSlotPlugin.py:216 #: appEditors/geo_plugins/GeoCirclePlugin.py:211 appEditors/geo_plugins/GeoCopyPlugin.py:244 #: appEditors/geo_plugins/GeoRectanglePlugin.py:256 appGUI/GUIElements.py:5333 #: appGUI/MainGUI.py:531 appGUI/MainGUI.py:5002 appGUI/MainGUI.py:5270 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:100 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:211 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:270 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:141 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:167 appPlugins/ToolFilm.py:1497 msgid "Y" msgstr "" #: appEditors/AppGerberEditor.py:6685 appEditors/AppGerberEditor.py:6705 #: appEditors/AppGerberEditor.py:6742 appEditors/AppGerberEditor.py:6852 #: appEditors/exc_plugins/ExcCopyPlugin.py:245 appEditors/exc_plugins/ExcCopyPlugin.py:265 #: appEditors/exc_plugins/ExcCopyPlugin.py:429 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:235 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:255 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:296 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:208 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:214 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:299 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:319 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:359 #: appEditors/exc_plugins/ExcSlotPlugin.py:217 appEditors/exc_plugins/ExcSlotPlugin.py:223 #: appEditors/geo_plugins/GeoCirclePlugin.py:248 appEditors/geo_plugins/GeoCopyPlugin.py:245 #: appEditors/geo_plugins/GeoCopyPlugin.py:265 appEditors/geo_plugins/GeoCopyPlugin.py:429 #: appEditors/geo_plugins/GeoTransformationPlugin.py:670 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:101 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:120 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:212 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:217 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:271 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:292 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:142 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:160 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:123 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:102 appPlugins/ToolDistance.py:935 #: appPlugins/ToolDistance.py:948 appPlugins/ToolFilm.py:1434 #: appPlugins/ToolObjectDistance.py:555 appPlugins/ToolTransform.py:683 msgid "Angle" msgstr "" #: appEditors/AppGerberEditor.py:6691 appEditors/exc_plugins/ExcCopyPlugin.py:252 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:242 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:305 #: appEditors/geo_plugins/GeoCopyPlugin.py:252 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:107 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:277 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:148 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:295 appPlugins/ToolCutOut.py:2746 msgid "Pitch" msgstr "" #: appEditors/AppGerberEditor.py:6693 appEditors/exc_plugins/ExcCopyPlugin.py:254 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:244 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:307 #: appEditors/geo_plugins/GeoCopyPlugin.py:254 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:109 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:279 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:150 msgid "Pitch = Distance between elements of the array." msgstr "" #: appEditors/AppGerberEditor.py:6707 appEditors/exc_plugins/ExcCopyPlugin.py:267 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:257 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:321 #: appEditors/geo_plugins/GeoCopyPlugin.py:267 msgid "" "Angle at which the linear array is placed.\n" "The precision is of max 2 decimals.\n" "Min value is: -360.00 degrees.\n" "Max value is: 360.00 degrees." msgstr "" #: appEditors/AppGerberEditor.py:6731 appEditors/exc_plugins/ExcCopyPlugin.py:418 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:285 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:348 #: appEditors/geo_plugins/GeoCopyPlugin.py:418 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:148 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:320 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:188 msgid "" "Direction for circular array.\n" "Can be CW = clockwise or CCW = counter clockwise." msgstr "" #: appEditors/AppGerberEditor.py:6735 appEditors/exc_plugins/ExcCopyPlugin.py:422 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:289 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:352 #: appEditors/geo_plugins/GeoCopyPlugin.py:422 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:152 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:324 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:192 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:371 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:404 msgid "CW" msgstr "" #: appEditors/AppGerberEditor.py:6736 appEditors/exc_plugins/ExcCopyPlugin.py:423 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:290 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:353 #: appEditors/geo_plugins/GeoCopyPlugin.py:423 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:153 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:325 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:193 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:372 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:405 msgid "CCW" msgstr "" #: appEditors/AppGerberEditor.py:6744 appEditors/exc_plugins/ExcCopyPlugin.py:430 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:297 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:360 #: appEditors/geo_plugins/GeoCopyPlugin.py:430 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:122 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:161 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:294 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:333 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:162 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:201 msgid "Angle at which each element in circular array is placed." msgstr "" #: appEditors/AppGerberEditor.py:6778 appEditors/AppGerberEditor.py:7228 #: appEditors/geo_plugins/GeoTransformationPlugin.py:90 #: appEditors/geo_plugins/GeoTransformationPlugin.py:598 appGUI/MainGUI.py:772 #: appPlugins/ToolTransform.py:81 appPlugins/ToolTransform.py:563 msgid "Transformation" msgstr "" #: appEditors/AppGerberEditor.py:6779 appEditors/AppGerberEditor.py:6868 #: appEditors/geo_plugins/GeoTransformationPlugin.py:599 #: appEditors/geo_plugins/GeoTransformationPlugin.py:686 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:88 appPlugins/ToolTransform.py:564 #: appPlugins/ToolTransform.py:674 appPlugins/ToolTransform.py:699 msgid "Rotate" msgstr "" #: appEditors/AppGerberEditor.py:6780 appEditors/geo_plugins/GeoTransformationPlugin.py:600 #: appPlugins/ToolTransform.py:565 msgid "Skew/Shear" msgstr "" #: appEditors/AppGerberEditor.py:6782 appEditors/geo_plugins/GeoTransformationPlugin.py:602 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:160 appPlugins/ToolDblSided.py:1008 #: appPlugins/ToolFilm.py:1490 appPlugins/ToolTransform.py:567 msgid "Mirror" msgstr "" #: appEditors/AppGerberEditor.py:6812 appEditors/geo_plugins/GeoTransformationPlugin.py:630 #: appGUI/GUIElements.py:4376 appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:89 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:147 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:94 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:42 appPlugins/ToolDblSided.py:887 #: appPlugins/ToolDblSided.py:1078 appPlugins/ToolFilm.py:1389 appPlugins/ToolFilm.py:1460 #: appPlugins/ToolMarkers.py:1348 appPlugins/ToolPanelize.py:1208 #: appPlugins/ToolTransform.py:605 msgid "Reference" msgstr "" #: appEditors/AppGerberEditor.py:6814 appEditors/geo_plugins/GeoTransformationPlugin.py:632 msgid "" "The reference point for Rotate, Skew, Scale, Mirror.\n" "Can be:\n" "- Origin -> it is the 0, 0 point\n" "- Selection -> the center of the bounding box of the selected objects\n" "- Point -> a custom point defined by X,Y coordinates\n" "- Min Selection -> the point (minx, miny) of the bounding box of the selection" msgstr "" #: appEditors/AppGerberEditor.py:6822 appEditors/geo_plugins/GeoTransformationPlugin.py:640 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52 appPlugins/ToolTransform.py:615 msgid "Origin" msgstr "" #: appEditors/AppGerberEditor.py:6822 appEditors/AppGerberEditor.py:7237 #: appEditors/geo_plugins/GeoTransformationPlugin.py:103 #: appEditors/geo_plugins/GeoTransformationPlugin.py:640 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:266 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:120 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:313 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:310 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:257 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52 appPlugins/ToolFiducials.py:1149 #: appPlugins/ToolFollow.py:727 appPlugins/ToolIsolation.py:3884 #: appPlugins/ToolMarkers.py:1439 appPlugins/ToolNCC.py:4536 appPlugins/ToolPaint.py:3285 #: appPlugins/ToolPunchGerber.py:2320 appPlugins/ToolTransform.py:615 defaults.py:630 msgid "Selection" msgstr "" #: appEditors/AppGerberEditor.py:6822 appEditors/geo_plugins/GeoTransformationPlugin.py:640 #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:58 appPlugins/ToolDblSided.py:898 #: appPlugins/ToolTransform.py:615 msgid "Point" msgstr "" #: appEditors/AppGerberEditor.py:6822 appEditors/geo_plugins/GeoTransformationPlugin.py:640 msgid "Minimum" msgstr "" #: appEditors/AppGerberEditor.py:6828 appEditors/AppGerberEditor.py:7124 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:132 #: appEditors/exc_plugins/ExcDrillPlugin.py:139 #: appEditors/exc_plugins/ExcResizePlugin.py:131 #: appEditors/exc_plugins/ExcResizePlugin.py:150 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:130 #: appEditors/exc_plugins/ExcSlotPlugin.py:139 appEditors/geo_plugins/GeoCirclePlugin.py:283 #: appEditors/geo_plugins/GeoTransformationPlugin.py:646 #: appEditors/geo_plugins/GeoTransformationPlugin.py:942 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:136 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:73 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:133 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:48 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:70 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:92 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:114 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:148 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:170 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:192 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:227 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:261 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:283 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:296 appMain.py:9175 #: appPlugins/ToolExtract.py:1282 appPlugins/ToolExtract.py:1311 #: appPlugins/ToolPunchGerber.py:2199 appPlugins/ToolPunchGerber.py:2307 #: appPlugins/ToolRulesCheck.py:1480 appPlugins/ToolRulesCheck.py:1504 #: appPlugins/ToolRulesCheck.py:1529 appPlugins/ToolRulesCheck.py:1554 #: appPlugins/ToolRulesCheck.py:1591 appPlugins/ToolRulesCheck.py:1616 #: appPlugins/ToolRulesCheck.py:1641 appPlugins/ToolRulesCheck.py:1679 #: appPlugins/ToolRulesCheck.py:1716 appPlugins/ToolRulesCheck.py:1741 #: appPlugins/ToolTransform.py:621 appPlugins/ToolTransform.py:986 msgid "Value" msgstr "" #: appEditors/AppGerberEditor.py:6830 appEditors/geo_plugins/GeoTransformationPlugin.py:648 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:60 appPlugins/ToolTransform.py:623 msgid "A point of reference in format X,Y." msgstr "" #: appEditors/AppGerberEditor.py:6839 appEditors/geo_plugins/GeoTransformationPlugin.py:657 #: appPlugins/ToolTransform.py:632 msgid "Add point coordinates from clipboard." msgstr "" #: appEditors/AppGerberEditor.py:6854 appEditors/geo_plugins/GeoTransformationPlugin.py:672 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:104 appPlugins/ToolTransform.py:685 msgid "" "Angle, in degrees.\n" "Float number between -360 and 359.\n" "Positive numbers for CW motion.\n" "Negative numbers for CCW motion." msgstr "" #: appEditors/AppGerberEditor.py:6870 appEditors/geo_plugins/GeoTransformationPlugin.py:688 #: appPlugins/ToolTransform.py:701 msgid "" "Rotate the selected object(s).\n" "The point of reference is the middle of\n" "the bounding box for all selected objects." msgstr "" #: appEditors/AppGerberEditor.py:6890 appEditors/AppGerberEditor.py:6952 #: appEditors/geo_plugins/GeoTransformationPlugin.py:708 #: appEditors/geo_plugins/GeoTransformationPlugin.py:770 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:125 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:177 appPlugins/ToolTransform.py:724 #: appPlugins/ToolTransform.py:794 msgid "Link" msgstr "" #: appEditors/AppGerberEditor.py:6892 appEditors/AppGerberEditor.py:6954 #: appEditors/geo_plugins/GeoTransformationPlugin.py:710 #: appEditors/geo_plugins/GeoTransformationPlugin.py:772 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:127 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:179 appPlugins/ToolTransform.py:726 #: appPlugins/ToolTransform.py:796 msgid "Link the Y entry to X entry and copy its content." msgstr "" #: appEditors/AppGerberEditor.py:6897 appEditors/geo_plugins/GeoTransformationPlugin.py:715 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:143 appPlugins/ToolTransform.py:737 msgid "X angle" msgstr "" #: appEditors/AppGerberEditor.py:6899 appEditors/AppGerberEditor.py:6920 #: appEditors/geo_plugins/GeoTransformationPlugin.py:717 #: appEditors/geo_plugins/GeoTransformationPlugin.py:738 appPlugins/ToolTransform.py:739 #: appPlugins/ToolTransform.py:760 msgid "" "Angle for Skew action, in degrees.\n" "Float number between -360 and 360." msgstr "" #: appEditors/AppGerberEditor.py:6907 appEditors/geo_plugins/GeoTransformationPlugin.py:725 #: appPlugins/ToolTransform.py:747 msgid "Skew X" msgstr "" #: appEditors/AppGerberEditor.py:6909 appEditors/AppGerberEditor.py:6930 #: appEditors/geo_plugins/GeoTransformationPlugin.py:727 #: appEditors/geo_plugins/GeoTransformationPlugin.py:748 appPlugins/ToolTransform.py:749 #: appPlugins/ToolTransform.py:770 msgid "" "Skew/shear the selected object(s).\n" "The point of reference is the middle of\n" "the bounding box for all selected objects." msgstr "" #: appEditors/AppGerberEditor.py:6918 appEditors/geo_plugins/GeoTransformationPlugin.py:736 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:157 appPlugins/ToolTransform.py:758 msgid "Y angle" msgstr "" #: appEditors/AppGerberEditor.py:6928 appEditors/geo_plugins/GeoTransformationPlugin.py:746 #: appPlugins/ToolTransform.py:768 msgid "Skew Y" msgstr "" #: appEditors/AppGerberEditor.py:6959 appEditors/geo_plugins/GeoTransformationPlugin.py:777 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:194 appPlugins/ToolTransform.py:806 msgid "X factor" msgstr "" #: appEditors/AppGerberEditor.py:6961 appEditors/geo_plugins/GeoTransformationPlugin.py:779 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:196 appPlugins/ToolTransform.py:808 msgid "Factor for scaling on X axis." msgstr "" #: appEditors/AppGerberEditor.py:6968 appEditors/geo_plugins/GeoTransformationPlugin.py:786 #: appPlugins/ToolTransform.py:815 msgid "Scale X" msgstr "" #: appEditors/AppGerberEditor.py:6970 appEditors/AppGerberEditor.py:6990 #: appEditors/geo_plugins/GeoTransformationPlugin.py:788 #: appEditors/geo_plugins/GeoTransformationPlugin.py:808 appPlugins/ToolTransform.py:817 #: appPlugins/ToolTransform.py:837 msgid "" "Scale the selected object(s).\n" "The point of reference depends on \n" "the Scale reference checkbox state." msgstr "" #: appEditors/AppGerberEditor.py:6979 appEditors/geo_plugins/GeoTransformationPlugin.py:797 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:207 appPlugins/ToolTransform.py:826 msgid "Y factor" msgstr "" #: appEditors/AppGerberEditor.py:6981 appEditors/geo_plugins/GeoTransformationPlugin.py:799 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:209 appPlugins/ToolTransform.py:828 msgid "Factor for scaling on Y axis." msgstr "" #: appEditors/AppGerberEditor.py:6988 appEditors/geo_plugins/GeoTransformationPlugin.py:806 #: appPlugins/ToolTransform.py:835 msgid "Scale Y" msgstr "" #: appEditors/AppGerberEditor.py:7015 appEditors/geo_plugins/GeoTransformationPlugin.py:833 #: appPlugins/ToolTransform.py:865 msgid "Flip on X" msgstr "" #: appEditors/AppGerberEditor.py:7017 appEditors/AppGerberEditor.py:7022 #: appEditors/geo_plugins/GeoTransformationPlugin.py:835 #: appEditors/geo_plugins/GeoTransformationPlugin.py:840 appPlugins/ToolTransform.py:867 #: appPlugins/ToolTransform.py:872 msgid "Flip the selected object(s) over the X axis." msgstr "" #: appEditors/AppGerberEditor.py:7020 appEditors/geo_plugins/GeoTransformationPlugin.py:838 #: appPlugins/ToolTransform.py:870 msgid "Flip on Y" msgstr "" #: appEditors/AppGerberEditor.py:7040 appEditors/geo_plugins/GeoTransformationPlugin.py:858 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:69 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:128 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:231 appPlugins/ToolFilm.py:1369 #: appPlugins/ToolFilm.py:1440 appPlugins/ToolTransform.py:893 msgid "X val" msgstr "" #: appEditors/AppGerberEditor.py:7042 appEditors/geo_plugins/GeoTransformationPlugin.py:860 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:233 appPlugins/ToolTransform.py:895 msgid "Distance to offset on X axis. In current units." msgstr "" #: appEditors/AppGerberEditor.py:7049 appEditors/geo_plugins/GeoTransformationPlugin.py:867 #: appPlugins/ToolTransform.py:902 msgid "Offset X" msgstr "" #: appEditors/AppGerberEditor.py:7051 appEditors/AppGerberEditor.py:7071 #: appEditors/geo_plugins/GeoTransformationPlugin.py:869 #: appEditors/geo_plugins/GeoTransformationPlugin.py:889 appPlugins/ToolTransform.py:904 #: appPlugins/ToolTransform.py:924 msgid "" "Offset the selected object(s).\n" "The point of reference is the middle of\n" "the bounding box for all selected objects.\n" msgstr "" #: appEditors/AppGerberEditor.py:7060 appEditors/geo_plugins/GeoTransformationPlugin.py:878 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:79 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:137 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:244 appPlugins/ToolFilm.py:1379 #: appPlugins/ToolFilm.py:1450 appPlugins/ToolTransform.py:913 msgid "Y val" msgstr "" #: appEditors/AppGerberEditor.py:7062 appEditors/geo_plugins/GeoTransformationPlugin.py:880 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:246 appPlugins/ToolTransform.py:915 msgid "Distance to offset on Y axis. In current units." msgstr "" #: appEditors/AppGerberEditor.py:7069 appEditors/geo_plugins/GeoTransformationPlugin.py:887 #: appPlugins/ToolTransform.py:922 msgid "Offset Y" msgstr "" #: appEditors/AppGerberEditor.py:7089 appEditors/geo_plugins/GeoTransformationPlugin.py:907 #: appGUI/ObjectUI.py:519 appGUI/ObjectUI.py:561 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:76 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:139 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:209 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:263 appPlugins/ToolFilm.py:1539 #: appPlugins/ToolInvertGerber.py:278 appPlugins/ToolQRCode.py:900 #: appPlugins/ToolTransform.py:945 msgid "Rounded" msgstr "" #: appEditors/AppGerberEditor.py:7091 appEditors/geo_plugins/GeoTransformationPlugin.py:909 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:265 appPlugins/ToolTransform.py:947 msgid "" "If checked then the buffer will surround the buffered shape,\n" "every corner will be rounded.\n" "If not checked then the buffer will follow the exact geometry\n" "of the buffered shape." msgstr "" #: appEditors/AppGerberEditor.py:7099 appEditors/geo_plugins/GeoTransformationPlugin.py:917 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:279 appPlugins/ToolDistance.py:181 #: appPlugins/ToolDistance.py:810 appPlugins/ToolTransform.py:961 msgid "Distance" msgstr "" #: appEditors/AppGerberEditor.py:7101 appEditors/geo_plugins/GeoTransformationPlugin.py:919 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:281 appPlugins/ToolTransform.py:963 msgid "" "A positive value will create the effect of dilation,\n" "while a negative value will create the effect of erosion.\n" "Each geometry element of the object will be increased\n" "or decreased with the 'distance'." msgstr "" #: appEditors/AppGerberEditor.py:7113 appEditors/geo_plugins/GeoTransformationPlugin.py:931 #: appPlugins/ToolTransform.py:975 msgid "Buffer D" msgstr "" #: appEditors/AppGerberEditor.py:7115 appEditors/geo_plugins/GeoTransformationPlugin.py:933 #: appPlugins/ToolTransform.py:977 msgid "" "Create the buffer effect on each geometry,\n" "element from the selected object, using the distance." msgstr "" #: appEditors/AppGerberEditor.py:7126 appEditors/geo_plugins/GeoTransformationPlugin.py:944 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:298 appPlugins/ToolTransform.py:988 msgid "" "A positive value will create the effect of dilation,\n" "while a negative value will create the effect of erosion.\n" "Each geometry element of the object will be increased\n" "or decreased to fit the 'Value'. Value is a percentage\n" "of the initial dimension." msgstr "" #: appEditors/AppGerberEditor.py:7139 appEditors/geo_plugins/GeoTransformationPlugin.py:957 #: appPlugins/ToolTransform.py:1001 msgid "Buffer F" msgstr "" #: appEditors/AppGerberEditor.py:7141 appEditors/geo_plugins/GeoTransformationPlugin.py:959 #: appPlugins/ToolTransform.py:1003 msgid "" "Create the buffer effect on each geometry,\n" "element from the selected object, using the factor." msgstr "" #: appEditors/AppGerberEditor.py:7201 appEditors/AppGerberEditor.py:7210 #: appEditors/exc_plugins/ExcCopyPlugin.py:54 appEditors/exc_plugins/ExcCopyPlugin.py:63 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:49 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:58 #: appEditors/exc_plugins/ExcDrillPlugin.py:54 appEditors/exc_plugins/ExcDrillPlugin.py:63 #: appEditors/exc_plugins/ExcResizePlugin.py:54 appEditors/exc_plugins/ExcResizePlugin.py:63 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:51 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:60 #: appEditors/exc_plugins/ExcSlotPlugin.py:54 appEditors/exc_plugins/ExcSlotPlugin.py:63 #: appEditors/geo_plugins/GeoBufferPlugin.py:48 appEditors/geo_plugins/GeoBufferPlugin.py:57 #: appEditors/geo_plugins/GeoCirclePlugin.py:57 appEditors/geo_plugins/GeoCopyPlugin.py:54 #: appEditors/geo_plugins/GeoCopyPlugin.py:63 appEditors/geo_plugins/GeoPaintPlugin.py:44 #: appEditors/geo_plugins/GeoPaintPlugin.py:53 appEditors/geo_plugins/GeoPathPlugin.py:54 #: appEditors/geo_plugins/GeoPathPlugin.py:63 #: appEditors/geo_plugins/GeoRectanglePlugin.py:57 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:51 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:60 #: appEditors/geo_plugins/GeoTextPlugin.py:51 appEditors/geo_plugins/GeoTextPlugin.py:60 #: appEditors/geo_plugins/GeoTransformationPlugin.py:63 #: appEditors/geo_plugins/GeoTransformationPlugin.py:72 appPlugins/ToolAlignObjects.py:85 #: appPlugins/ToolAlignObjects.py:94 appPlugins/ToolCalculators.py:48 #: appPlugins/ToolCalculators.py:57 appPlugins/ToolCopperThieving.py:91 #: appPlugins/ToolCopperThieving.py:100 appPlugins/ToolCutOut.py:134 #: appPlugins/ToolCutOut.py:143 appPlugins/ToolDblSided.py:59 appPlugins/ToolDblSided.py:68 #: appPlugins/ToolDistance.py:102 appPlugins/ToolDistance.py:111 #: appPlugins/ToolDistance.py:168 appPlugins/ToolDistance.py:177 #: appPlugins/ToolDrilling.py:133 appPlugins/ToolDrilling.py:142 #: appPlugins/ToolEtchCompensation.py:54 appPlugins/ToolEtchCompensation.py:63 #: appPlugins/ToolExtract.py:90 appPlugins/ToolExtract.py:99 appPlugins/ToolFiducials.py:92 #: appPlugins/ToolFiducials.py:101 appPlugins/ToolFilm.py:105 appPlugins/ToolFilm.py:114 #: appPlugins/ToolFollow.py:78 appPlugins/ToolFollow.py:87 appPlugins/ToolImage.py:55 #: appPlugins/ToolImage.py:64 appPlugins/ToolInvertGerber.py:54 #: appPlugins/ToolInvertGerber.py:63 appPlugins/ToolIsolation.py:146 #: appPlugins/ToolIsolation.py:155 appPlugins/ToolLevelling.py:131 #: appPlugins/ToolLevelling.py:140 appPlugins/ToolMarkers.py:106 #: appPlugins/ToolMarkers.py:115 appPlugins/ToolMilling.py:171 appPlugins/ToolMilling.py:180 #: appPlugins/ToolNCC.py:147 appPlugins/ToolNCC.py:156 appPlugins/ToolObjectDistance.py:63 #: appPlugins/ToolObjectDistance.py:72 appPlugins/ToolOptimal.py:66 #: appPlugins/ToolOptimal.py:75 appPlugins/ToolPaint.py:154 appPlugins/ToolPaint.py:163 #: appPlugins/ToolPanelize.py:60 appPlugins/ToolPanelize.py:69 #: appPlugins/ToolPcbWizard.py:66 appPlugins/ToolPcbWizard.py:75 #: appPlugins/ToolPunchGerber.py:115 appPlugins/ToolPunchGerber.py:124 #: appPlugins/ToolQRCode.py:75 appPlugins/ToolQRCode.py:84 appPlugins/ToolReport.py:78 #: appPlugins/ToolReport.py:87 appPlugins/ToolRulesCheck.py:69 #: appPlugins/ToolRulesCheck.py:78 appPlugins/ToolSolderPaste.py:73 #: appPlugins/ToolSolderPaste.py:82 appPlugins/ToolSub.py:115 appPlugins/ToolSub.py:124 #: appPlugins/ToolTransform.py:45 appPlugins/ToolTransform.py:54 msgid "Plugin" msgstr "" #: appEditors/AppGerberEditor.py:7236 appEditors/geo_plugins/GeoTransformationPlugin.py:102 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:68 appPlugins/ToolDrilling.py:2922 #: appPlugins/ToolMilling.py:4975 appPlugins/ToolPanelize.py:1228 #: appPlugins/ToolTransform.py:615 msgid "Object" msgstr "" #: appEditors/AppGerberEditor.py:7312 appEditors/geo_plugins/GeoTransformationPlugin.py:163 #: appPlugins/ToolTransform.py:175 msgid "Incorrect format for Point value. Needs format X,Y" msgstr "" #: appEditors/AppGerberEditor.py:7337 appEditors/geo_plugins/GeoTransformationPlugin.py:188 #: appPlugins/ToolTransform.py:192 msgid "Rotate transformation can not be done for a value of 0." msgstr "" #: appEditors/AppGerberEditor.py:7395 appEditors/AppGerberEditor.py:7416 #: appEditors/geo_plugins/GeoTransformationPlugin.py:243 #: appEditors/geo_plugins/GeoTransformationPlugin.py:261 appPlugins/ToolTransform.py:250 #: appPlugins/ToolTransform.py:271 msgid "Scale transformation can not be done for a factor of 0 or 1." msgstr "" #: appEditors/AppGerberEditor.py:7429 appEditors/AppGerberEditor.py:7438 #: appEditors/geo_plugins/GeoTransformationPlugin.py:274 #: appEditors/geo_plugins/GeoTransformationPlugin.py:283 appPlugins/ToolTransform.py:284 #: appPlugins/ToolTransform.py:293 msgid "Offset transformation can not be done for a value of 0." msgstr "" #: appEditors/AppGerberEditor.py:7475 msgid "Appying Rotate" msgstr "" #: appEditors/AppGerberEditor.py:7489 appEditors/AppGerberEditor.py:7531 #: appEditors/AppGerberEditor.py:7571 appEditors/AppGerberEditor.py:7610 #: appEditors/AppGerberEditor.py:7654 appEditors/AppGerberEditor.py:7690 #: appEditors/geo_plugins/GeoTransformationPlugin.py:328 #: appEditors/geo_plugins/GeoTransformationPlugin.py:361 #: appEditors/geo_plugins/GeoTransformationPlugin.py:395 #: appEditors/geo_plugins/GeoTransformationPlugin.py:429 #: appEditors/geo_plugins/GeoTransformationPlugin.py:462 #: appEditors/geo_plugins/GeoTransformationPlugin.py:483 appMain.py:6996 appMain.py:7042 #: appPlugins/ToolTransform.py:343 appPlugins/ToolTransform.py:383 #: appPlugins/ToolTransform.py:422 appPlugins/ToolTransform.py:457 #: appPlugins/ToolTransform.py:494 appPlugins/ToolTransform.py:529 msgid "Action was not executed" msgstr "" #: appEditors/AppGerberEditor.py:7508 msgid "Applying Flip" msgstr "" #: appEditors/AppGerberEditor.py:7520 appEditors/geo_plugins/GeoTransformationPlugin.py:354 #: appMain.py:6994 appPlugins/ToolTransform.py:370 msgid "Flip on Y axis done" msgstr "" #: appEditors/AppGerberEditor.py:7528 appEditors/geo_plugins/GeoTransformationPlugin.py:357 #: appMain.py:7040 appPlugins/ToolTransform.py:379 msgid "Flip on X axis done" msgstr "" #: appEditors/AppGerberEditor.py:7551 msgid "Applying Skew" msgstr "" #: appEditors/AppGerberEditor.py:7567 appEditors/geo_plugins/GeoTransformationPlugin.py:390 msgid "Skew on the X axis done" msgstr "" #: appEditors/AppGerberEditor.py:7569 appEditors/geo_plugins/GeoTransformationPlugin.py:392 msgid "Skew on the Y axis done" msgstr "" #: appEditors/AppGerberEditor.py:7592 msgid "Applying Scale" msgstr "" #: appEditors/AppGerberEditor.py:7605 appEditors/geo_plugins/GeoTransformationPlugin.py:425 msgid "Scale on the X axis done" msgstr "" #: appEditors/AppGerberEditor.py:7607 appEditors/geo_plugins/GeoTransformationPlugin.py:427 msgid "Scale on the Y axis done" msgstr "" #: appEditors/AppGerberEditor.py:7628 msgid "Applying Offset" msgstr "" #: appEditors/AppGerberEditor.py:7649 appEditors/AppGerberEditor.py:7722 #: appEditors/geo_plugins/GeoTransformationPlugin.py:457 #: appEditors/geo_plugins/GeoTransformationPlugin.py:515 appPlugins/ToolMarkers.py:1366 msgid "Offset on the X axis." msgstr "" #: appEditors/AppGerberEditor.py:7651 appEditors/geo_plugins/GeoTransformationPlugin.py:459 #: appPlugins/ToolMarkers.py:1379 msgid "Offset on the Y axis." msgstr "" #: appEditors/AppGerberEditor.py:7664 msgid "Applying Buffer" msgstr "" #: appEditors/AppGerberEditor.py:7686 appEditors/geo_plugins/GeoTransformationPlugin.py:479 #: appPlugins/ToolTransform.py:525 msgid "Buffer done" msgstr "" #: appEditors/AppGerberEditor.py:7694 appEditors/geo_plugins/GeoTransformationPlugin.py:487 msgid "Rotate ..." msgstr "" #: appEditors/AppGerberEditor.py:7695 appEditors/AppGerberEditor.py:7747 #: appEditors/AppGerberEditor.py:7763 appEditors/geo_plugins/GeoTransformationPlugin.py:488 #: appEditors/geo_plugins/GeoTransformationPlugin.py:540 #: appEditors/geo_plugins/GeoTransformationPlugin.py:556 msgid "Enter an Angle Value (degrees)" msgstr "" #: appEditors/AppGerberEditor.py:7704 appEditors/geo_plugins/GeoTransformationPlugin.py:497 #: appPlugins/ToolTransform.py:341 msgid "Rotate done" msgstr "" #: appEditors/AppGerberEditor.py:7707 appEditors/geo_plugins/GeoTransformationPlugin.py:500 msgid "Rotate cancelled" msgstr "" #: appEditors/AppGerberEditor.py:7712 appEditors/geo_plugins/GeoTransformationPlugin.py:505 msgid "Offset on X axis ..." msgstr "" #: appEditors/AppGerberEditor.py:7713 appEditors/AppGerberEditor.py:7731 #: appEditors/geo_plugins/GeoTransformationPlugin.py:506 #: appEditors/geo_plugins/GeoTransformationPlugin.py:524 msgid "Enter a distance Value" msgstr "" #: appEditors/AppGerberEditor.py:7725 appEditors/geo_plugins/GeoTransformationPlugin.py:518 msgid "Offset X cancelled" msgstr "" #: appEditors/AppGerberEditor.py:7730 appEditors/geo_plugins/GeoTransformationPlugin.py:523 msgid "Offset on Y axis ..." msgstr "" #: appEditors/AppGerberEditor.py:7740 appEditors/geo_plugins/GeoTransformationPlugin.py:533 msgid "Offset on Y axis done" msgstr "" #: appEditors/AppGerberEditor.py:7743 msgid "Offset Y cancelled" msgstr "" #: appEditors/AppGerberEditor.py:7746 appEditors/geo_plugins/GeoTransformationPlugin.py:539 msgid "Skew on X axis ..." msgstr "" #: appEditors/AppGerberEditor.py:7756 appEditors/geo_plugins/GeoTransformationPlugin.py:549 msgid "Skew on X axis done" msgstr "" #: appEditors/AppGerberEditor.py:7759 msgid "Skew X cancelled" msgstr "" #: appEditors/AppGerberEditor.py:7762 appEditors/geo_plugins/GeoTransformationPlugin.py:555 msgid "Skew on Y axis ..." msgstr "" #: appEditors/AppGerberEditor.py:7772 appEditors/geo_plugins/GeoTransformationPlugin.py:565 msgid "Skew on Y axis done" msgstr "" #: appEditors/AppGerberEditor.py:7775 msgid "Skew Y cancelled" msgstr "" #: appEditors/AppTextEditor.py:87 appEditors/AppTextEditor.py:358 appGUI/GUIElements.py:4490 msgid "Find" msgstr "" #: appEditors/AppTextEditor.py:89 msgid "Will search and highlight in yellow the string in the Find box." msgstr "" #: appEditors/AppTextEditor.py:94 appEditors/AppTextEditor.py:95 msgid "Find box. Enter here the strings to be searched in the text." msgstr "" #: appEditors/AppTextEditor.py:99 msgid "Replace With" msgstr "" #: appEditors/AppTextEditor.py:101 msgid "Will replace the string from the Find box with the one in the Replace box." msgstr "" #: appEditors/AppTextEditor.py:106 appEditors/AppTextEditor.py:107 msgid "String to replace the one in the Find box throughout the text." msgstr "" #: appEditors/AppTextEditor.py:111 appEditors/appGCodeEditor.py:160 #: appGUI/GUIElements.py:5354 appGUI/ObjectUI.py:1310 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:59 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:323 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279 appPlugins/ToolExtract.py:1055 #: appPlugins/ToolFollow.py:734 appPlugins/ToolIsolation.py:3894 #: appPlugins/ToolPaint.py:3297 appPlugins/ToolPunchGerber.py:2069 msgid "All" msgstr "" #: appEditors/AppTextEditor.py:112 msgid "" "When checked it will replace all instances in the 'Find' box\n" "with the text in the 'Replace' box.." msgstr "" #: appEditors/AppTextEditor.py:125 msgid "Save changes internally." msgstr "" #: appEditors/AppTextEditor.py:132 msgid "Open a OS standard Preview Print window." msgstr "" #: appEditors/AppTextEditor.py:138 msgid "Open a OS standard Print window." msgstr "" #: appEditors/AppTextEditor.py:144 msgid "Will open a text file in the editor." msgstr "" #: appEditors/AppTextEditor.py:150 msgid "Will save the text in the editor into a file." msgstr "" #: appEditors/AppTextEditor.py:154 msgid "Run" msgstr "" #: appEditors/AppTextEditor.py:155 msgid "Will run the TCL commands found in the text file, one by one." msgstr "" #: appEditors/AppTextEditor.py:238 appEditors/appGCodeEditor.py:707 msgid "Open file" msgstr "" #: appEditors/AppTextEditor.py:269 appEditors/AppTextEditor.py:275 appMain.py:8152 #: appMain.py:8158 appObjects/CNCJobObject.py:715 appObjects/CNCJobObject.py:721 #: appPlugins/ToolLevelling.py:1466 appPlugins/ToolLevelling.py:1472 #: appPlugins/ToolLevelling.py:1658 appPlugins/ToolLevelling.py:1664 #: appPlugins/ToolSolderPaste.py:1180 msgid "Export Code ..." msgstr "" #: appEditors/AppTextEditor.py:330 appObjects/CNCJobObject.py:758 #: appObjects/CNCJobObject.py:1180 appPlugins/ToolLevelling.py:1490 #: appPlugins/ToolLevelling.py:1682 appPlugins/ToolSolderPaste.py:1208 msgid "No such file or directory" msgstr "" #: appEditors/AppTextEditor.py:342 appObjects/CNCJobObject.py:1194 #: appPlugins/ToolSolderPaste.py:1219 msgid "Saved to" msgstr "" #: appEditors/AppTextEditor.py:356 msgid "End of document." msgstr "" #: appEditors/AppTextEditor.py:357 msgid "Start from beginning?" msgstr "" #: appEditors/AppTextEditor.py:364 appGUI/GUIElements.py:2768 appGUI/GUIElements.py:2838 #: appGUI/GUIElements.py:2899 appGUI/GUIElements.py:2964 appGUI/GUIElements.py:4415 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:417 appMain.py:4999 appMain.py:5171 #: appMain.py:5262 appMain.py:9781 appMain.py:10135 appMain.py:12006 msgid "Ok" msgstr "" #: appEditors/appGCodeEditor.py:76 appGUI/GUIElements.py:4498 appGUI/MainGUI.py:208 #: appGUI/MainGUI.py:390 appGUI/MainGUI.py:5017 appGUI/MainGUI.py:5278 #: appGUI/MainGUI.py:5387 appGUI/MainGUI.py:5530 msgid "Ctrl+S" msgstr "" #: appEditors/appGCodeEditor.py:82 appMain.py:8316 msgid "Code Editor" msgstr "" #: appEditors/appGCodeEditor.py:166 msgid "Header" msgstr "" #: appEditors/appGCodeEditor.py:172 msgid "Start" msgstr "" #: appEditors/appGCodeEditor.py:266 msgid "All GCode" msgstr "" #: appEditors/appGCodeEditor.py:272 msgid "Header GCode" msgstr "" #: appEditors/appGCodeEditor.py:278 msgid "Start GCode" msgstr "" #: appEditors/appGCodeEditor.py:682 appObjects/CNCJobObject.py:831 msgid "Loaded Machine Code into Code Editor" msgstr "" #: appEditors/appGCodeEditor.py:774 appGUI/ObjectUI.py:1330 #: appPlugins/ToolSolderPaste.py:1112 msgid "GCode Editor" msgstr "" #: appEditors/appGCodeEditor.py:812 appEditors/appGCodeEditor.py:823 msgid "GCode" msgstr "" #: appEditors/appGCodeEditor.py:823 appGUI/ObjectUI.py:741 appGUI/ObjectUI.py:1500 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:587 appObjects/AppObjectTemplate.py:556 #: appPlugins/ToolDrilling.py:2450 appPlugins/ToolMilling.py:4032 #: appPlugins/ToolMilling.py:4292 appPlugins/ToolReport.py:181 msgid "Drills" msgstr "" #: appEditors/appGCodeEditor.py:823 appGUI/ObjectUI.py:741 appGUI/ObjectUI.py:1500 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:175 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:588 appObjects/AppObjectTemplate.py:558 #: appPlugins/ToolDrilling.py:2450 appPlugins/ToolMilling.py:4032 #: appPlugins/ToolMilling.py:4293 appPlugins/ToolReport.py:183 msgid "Slots" msgstr "" #: appEditors/appGCodeEditor.py:843 appEditors/appGCodeEditor.py:865 msgid "CNC Code Snippet" msgstr "" #: appEditors/appGCodeEditor.py:845 appEditors/appGCodeEditor.py:867 msgid "Code snippet defined in Preferences." msgstr "" #: appEditors/appGCodeEditor.py:851 appEditors/appGCodeEditor.py:873 msgid "" "Type here any G-Code commands you would\n" "like to insert at the cursor location." msgstr "" #: appEditors/appGCodeEditor.py:857 appEditors/appGCodeEditor.py:879 msgid "Insert Code" msgstr "" #: appEditors/appGCodeEditor.py:860 appEditors/appGCodeEditor.py:882 msgid "Insert the code above at the cursor location." msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:152 appEditors/exc_plugins/ExcDrillPlugin.py:188 #: appEditors/exc_plugins/ExcSlotPlugin.py:252 appEditors/geo_plugins/GeoCopyPlugin.py:152 #: appEditors/geo_plugins/GeoPathPlugin.py:133 msgid "Length of the current segment/move." msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:167 appEditors/geo_plugins/GeoCopyPlugin.py:167 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:135 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:41 appPlugins/ToolImage.py:582 #: appPlugins/ToolLevelling.py:1897 appPlugins/ToolMarkers.py:1450 msgid "Mode" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:169 appEditors/geo_plugins/GeoCopyPlugin.py:169 msgid "Single copy or special (array of copies)" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:172 appEditors/geo_plugins/GeoCopyPlugin.py:172 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:116 appPlugins/ToolCutOut.py:2281 msgid "Single" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:173 appEditors/geo_plugins/GeoCopyPlugin.py:173 msgid "Array" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:193 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:199 #: appEditors/geo_plugins/GeoCopyPlugin.py:193 msgid "Specify how many items to be in the array." msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:204 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:185 #: appEditors/geo_plugins/GeoCopyPlugin.py:204 msgid "" "Select the type of array to create.\n" "It can be Linear X(Y) or Circular" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:210 appEditors/geo_plugins/GeoCopyPlugin.py:210 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:99 msgid "2D" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:293 appEditors/geo_plugins/GeoCopyPlugin.py:293 msgid "Placement" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:295 appEditors/geo_plugins/GeoCopyPlugin.py:295 msgid "" "Placement of array items:\n" "'Spacing' - define space between rows and columns \n" "'Offset' - each row (and column) will be placed at a multiple of a value, from origin" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:312 appEditors/geo_plugins/GeoCopyPlugin.py:312 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:81 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:86 appPlugins/ToolLevelling.py:1943 #: appPlugins/ToolPanelize.py:1324 msgid "Rows" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:314 appEditors/geo_plugins/GeoCopyPlugin.py:314 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:88 appPlugins/ToolPanelize.py:1326 msgid "Number of rows" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:323 appEditors/geo_plugins/GeoCopyPlugin.py:323 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:71 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:74 appPlugins/ToolLevelling.py:1932 #: appPlugins/ToolPanelize.py:1313 msgid "Columns" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:325 appEditors/geo_plugins/GeoCopyPlugin.py:325 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:76 appPlugins/ToolPanelize.py:1315 msgid "Number of columns" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:346 appEditors/geo_plugins/GeoCopyPlugin.py:346 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:61 appPlugins/ToolPanelize.py:1301 msgid "Spacing rows" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:348 appEditors/geo_plugins/GeoCopyPlugin.py:348 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:63 appPlugins/ToolPanelize.py:1303 msgid "" "Spacing between rows.\n" "In current units." msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:359 appEditors/geo_plugins/GeoCopyPlugin.py:359 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:47 appPlugins/ToolPanelize.py:1288 msgid "Spacing cols" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:361 appEditors/geo_plugins/GeoCopyPlugin.py:361 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:49 appPlugins/ToolPanelize.py:1290 msgid "" "Spacing between columns.\n" "In current units." msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:381 appEditors/exc_plugins/ExcCopyPlugin.py:394 #: appEditors/geo_plugins/GeoCopyPlugin.py:381 appEditors/geo_plugins/GeoCopyPlugin.py:394 msgid "" "'Offset' - each row (and column) will be placed at a multiple of a value, from origin" msgstr "" #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:142 #: appEditors/exc_plugins/ExcDrillPlugin.py:149 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:140 #: appEditors/exc_plugins/ExcSlotPlugin.py:149 appEditors/geo_plugins/GeoCirclePlugin.py:190 #: appEditors/geo_plugins/GeoRectanglePlugin.py:223 msgid "Position" msgstr "" #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:308 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:371 #: appEditors/geo_plugins/GeoCirclePlugin.py:219 #: appEditors/geo_plugins/GeoRectanglePlugin.py:291 appPlugins/ToolImage.py:899 msgid "Radius" msgstr "" #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:309 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:372 msgid "Array radius." msgstr "" #: appEditors/exc_plugins/ExcResizePlugin.py:152 msgid "Diameter to resize to." msgstr "" #: appEditors/exc_plugins/ExcResizePlugin.py:167 msgid "Resize a drill or a selection of drills." msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:170 #: appEditors/exc_plugins/ExcSlotPlugin.py:179 msgid "" "Parameters for adding a slot (hole with oval shape)\n" "either single or as an part of an array." msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:184 #: appEditors/exc_plugins/ExcSlotPlugin.py:193 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:185 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:63 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:123 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:68 #: appObjects/AppObjectTemplate.py:942 appPlugins/ToolFilm.py:1363 #: appPlugins/ToolFilm.py:1434 appPlugins/ToolMarkers.py:1322 appPlugins/ToolReport.py:594 msgid "Length" msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:186 #: appEditors/exc_plugins/ExcSlotPlugin.py:195 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:187 msgid "Length. The length of the slot." msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:200 #: appEditors/exc_plugins/ExcSlotPlugin.py:209 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:203 msgid "" "Direction on which the slot is oriented:\n" "- 'X' - horizontal axis \n" "- 'Y' - vertical axis or \n" "- 'Angle' - a custom angle for the slot inclination" msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:216 #: appEditors/exc_plugins/ExcSlotPlugin.py:225 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:219 msgid "" "Angle at which the slot is placed.\n" "The precision is of max 2 decimals.\n" "Min value is: -360.00 degrees.\n" "Max value is: 360.00 degrees." msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:234 msgid "Array parameters." msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:250 msgid "" "Select the type of slot array to create.\n" "It can be Linear X(Y) or Circular" msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:263 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:250 msgid "Specify how many slots to be in the array." msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:131 #: appEditors/geo_plugins/GeoBufferPlugin.py:277 msgid "" "Negative buffer value is not accepted. Use Buffer interior to generate an 'inside' shape" msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:141 #: appEditors/geo_plugins/GeoBufferPlugin.py:218 #: appEditors/geo_plugins/GeoBufferPlugin.py:286 #: appEditors/geo_plugins/GeoPaintPlugin.py:133 appMain.py:5917 msgid "Nothing selected." msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:145 #: appEditors/geo_plugins/GeoBufferPlugin.py:222 #: appEditors/geo_plugins/GeoBufferPlugin.py:290 msgid "Invalid distance." msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:190 #: appEditors/geo_plugins/GeoBufferPlugin.py:256 #: appEditors/geo_plugins/GeoBufferPlugin.py:324 msgid "Failed, the result is empty." msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:211 msgid "Negative buffer value is not accepted." msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:384 msgid "" "There are 3 types of corners:\n" " - 'Round': the corner is rounded for exterior buffer.\n" " - 'Square': the corner is met in a sharp angle for exterior buffer.\n" " - 'Beveled': the corner is a line that directly connects the features meeting in the " "corner" msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:400 msgid "Buffer Interior" msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:402 msgid "Buffer Exterior" msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:408 msgid "Full Buffer" msgstr "" #: appEditors/geo_plugins/GeoCirclePlugin.py:131 #: appEditors/geo_plugins/GeoRectanglePlugin.py:164 #: appEditors/geo_plugins/GeoTextPlugin.py:273 appGUI/MainGUI.py:1697 msgid "Apply" msgstr "" #: appEditors/geo_plugins/GeoCirclePlugin.py:273 #: appEditors/geo_plugins/GeoRectanglePlugin.py:331 msgid "Note" msgstr "" #: appEditors/geo_plugins/GeoCirclePlugin.py:275 #: appEditors/geo_plugins/GeoRectanglePlugin.py:333 msgid "Shift + click to select a shape for modification." msgstr "" #: appEditors/geo_plugins/GeoPaintPlugin.py:59 msgid "Paint Tool" msgstr "" #: appEditors/geo_plugins/GeoPaintPlugin.py:126 #, python-format msgid "Could not do Paint. Overlap value has to be less than 100%%." msgstr "" #: appEditors/geo_plugins/GeoPaintPlugin.py:139 msgid "Invalid value for" msgstr "" #: appEditors/geo_plugins/GeoPaintPlugin.py:201 appPlugins/ToolMilling.py:3303 #: appPlugins/ToolPaint.py:1986 appPlugins/ToolPaint.py:2196 msgid "" "Could not do Paint. Try a different combination of parameters. Or a different method of " "Paint" msgstr "" #: appEditors/geo_plugins/GeoPaintPlugin.py:244 msgid "Diameter of the tool to be used in the operation." msgstr "" #: appEditors/geo_plugins/GeoPaintPlugin.py:290 msgid "" "Algorithm to paint the polygons:\n" "- Standard: Fixed step inwards.\n" "- Seed-based: Outwards from seed.\n" "- Line-based: Parallel lines." msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:235 msgid "Anchor" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:237 appMain.py:5792 msgid "T Left" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:238 appMain.py:5793 msgid "T Right" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:239 appMain.py:5794 msgid "B Left" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:240 appMain.py:5795 msgid "B Right" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:241 appGUI/ObjectUI.py:1773 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:154 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:101 appMain.py:5562 appMain.py:5796 #: appPlugins/ToolFilm.py:1396 appPlugins/ToolFilm.py:1467 appPlugins/ToolMarkers.py:1357 msgid "Center" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:263 msgid "Corner" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:277 msgid "" "There are 3 types of corners:\n" " - 'Round': the corners are rounded\n" " - 'Square': the corners meet in a sharp angle\n" " - 'Beveled': the corners are a line that directly connects the features meeting in the " "corner" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:317 appObjects/AppObjectTemplate.py:947 #: appPlugins/ToolReport.py:599 msgid "Width" msgstr "" #: appEditors/geo_plugins/GeoTextPlugin.py:66 msgid "Text Tool" msgstr "" #: appEditors/geo_plugins/GeoTextPlugin.py:195 appEditors/geo_plugins/GeoTextPlugin.py:263 #: appGUI/MainGUI.py:1826 msgid "Text" msgstr "" #: appEditors/geo_plugins/GeoTextPlugin.py:227 msgid "Font" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:313 appPlugins/ToolTransform.py:321 msgid "Rotating" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:346 appPlugins/ToolTransform.py:353 msgid "Flipping" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:381 appPlugins/ToolTransform.py:398 msgid "Skewing" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:416 appPlugins/ToolTransform.py:432 msgid "Scaling" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:447 appPlugins/ToolTransform.py:467 msgid "Offsetting" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:472 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:56 appObjects/GerberObject.py:423 #: appPlugins/ToolCopperThieving.py:608 appPlugins/ToolCopperThieving.py:803 #: appPlugins/ToolCopperThieving.py:816 appPlugins/ToolIsolation.py:1602 #: appPlugins/ToolNCC.py:1989 appPlugins/ToolNCC.py:2016 appPlugins/ToolNCC.py:2124 #: appPlugins/ToolNCC.py:2137 appPlugins/ToolNCC.py:3038 appPlugins/ToolNCC.py:3143 #: appPlugins/ToolNCC.py:3158 appPlugins/ToolNCC.py:3426 appPlugins/ToolNCC.py:3527 #: appPlugins/ToolNCC.py:3542 appPlugins/ToolTransform.py:504 camlib.py:1166 msgid "Buffering" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:536 msgid "Offset on the Y axis canceled" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:552 msgid "Skew on X axis canceled" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:568 msgid "Skew on Y axis canceled" msgstr "" #: appGUI/GUIElements.py:427 appGUI/GUIElements.py:1203 appGUI/GUIElements.py:1447 msgid "Read Only" msgstr "" #: appGUI/GUIElements.py:432 appGUI/GUIElements.py:1208 appGUI/GUIElements.py:1452 #: appGUI/GUIElements.py:1893 appGUI/GUIElements.py:2187 appGUI/GUIElements.py:4456 msgid "Undo" msgstr "" #: appGUI/GUIElements.py:432 appGUI/GUIElements.py:1208 appGUI/GUIElements.py:1452 #: appGUI/GUIElements.py:1893 appGUI/GUIElements.py:2187 appGUI/GUIElements.py:4456 msgid "Ctrl+Z" msgstr "" #: appGUI/GUIElements.py:439 appGUI/GUIElements.py:1215 appGUI/GUIElements.py:1459 #: appGUI/GUIElements.py:1900 appGUI/GUIElements.py:2192 appGUI/GUIElements.py:4461 msgid "Redo" msgstr "" #: appGUI/GUIElements.py:439 appGUI/GUIElements.py:1215 appGUI/GUIElements.py:1459 #: appGUI/GUIElements.py:1900 appGUI/GUIElements.py:2192 appGUI/GUIElements.py:4461 msgid "Ctrl+Y" msgstr "" #: appGUI/GUIElements.py:448 appGUI/GUIElements.py:1224 appGUI/GUIElements.py:1468 #: appGUI/GUIElements.py:1909 appGUI/GUIElements.py:2199 appGUI/GUIElements.py:4468 #: appGUI/MainGUI.py:1846 appGUI/ObjectUI.py:1312 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:61 msgid "Cut" msgstr "" #: appGUI/GUIElements.py:448 appGUI/GUIElements.py:1224 appGUI/GUIElements.py:1468 #: appGUI/GUIElements.py:1909 appGUI/GUIElements.py:2199 appGUI/GUIElements.py:4468 #: appGUI/MainGUI.py:5279 msgid "Ctrl+X" msgstr "" #: appGUI/GUIElements.py:455 appGUI/GUIElements.py:1231 appGUI/GUIElements.py:1475 #: appGUI/GUIElements.py:1916 appGUI/GUIElements.py:2204 appGUI/GUIElements.py:4473 #: appGUI/MainGUI.py:461 appGUI/MainGUI.py:5008 msgid "Ctrl+C" msgstr "" #: appGUI/GUIElements.py:462 appGUI/GUIElements.py:1238 appGUI/GUIElements.py:1482 #: appGUI/GUIElements.py:1923 appGUI/GUIElements.py:2209 msgid "Paste" msgstr "" #: appGUI/GUIElements.py:462 appGUI/GUIElements.py:1238 appGUI/GUIElements.py:1482 #: appGUI/GUIElements.py:1923 appGUI/GUIElements.py:2209 msgid "Ctrl+V" msgstr "" #: appGUI/GUIElements.py:469 appGUI/GUIElements.py:1245 appGUI/GUIElements.py:1489 #: appGUI/GUIElements.py:1928 appGUI/GUIElements.py:2214 appGUI/GUIElements.py:4478 #: appGUI/MainGUI.py:5078 appGUI/MainGUI.py:5079 appGUI/MainGUI.py:5283 #: appGUI/MainGUI.py:5383 appGUI/MainGUI.py:5384 appGUI/MainGUI.py:5524 #: appGUI/MainGUI.py:5525 msgid "Del" msgstr "" #: appGUI/GUIElements.py:478 appGUI/GUIElements.py:1254 appGUI/GUIElements.py:1498 #: appGUI/GUIElements.py:1935 appGUI/GUIElements.py:2221 appGUI/GUIElements.py:4485 #: appGUI/MainGUI.py:498 appGUI/MainGUI.py:633 appGUI/MainGUI.py:5007 #: appObjects/ObjectCollection.py:1200 appObjects/ObjectCollection.py:1247 #: appPlugins/ToolIsolation.py:3934 appPlugins/ToolPunchGerber.py:2347 #: appPlugins/ToolRulesCheck.py:1185 msgid "Select All" msgstr "" #: appGUI/GUIElements.py:478 appGUI/GUIElements.py:1254 appGUI/GUIElements.py:1498 #: appGUI/GUIElements.py:1935 appGUI/GUIElements.py:2221 appGUI/GUIElements.py:4485 #: appGUI/MainGUI.py:498 appGUI/MainGUI.py:5007 msgid "Ctrl+A" msgstr "" #: appGUI/GUIElements.py:1261 appGUI/GUIElements.py:1505 msgid "Step Up" msgstr "" #: appGUI/GUIElements.py:1268 appGUI/GUIElements.py:1512 msgid "Step Down" msgstr "" #: appGUI/GUIElements.py:4378 msgid "" "The reference can be:\n" "- Absolute -> the reference point is point (0,0)\n" "- Relative -> the reference point is the mouse position before Jump" msgstr "" #: appGUI/GUIElements.py:4383 msgid "Abs" msgstr "" #: appGUI/GUIElements.py:4384 msgid "Relative" msgstr "" #: appGUI/GUIElements.py:4395 msgid "Location" msgstr "" #: appGUI/GUIElements.py:4397 msgid "" "The Location value is a tuple (x,y).\n" "If the reference is Absolute then the Jump will be at the position (x,y).\n" "If the reference is Relative then the Jump will be at the (x,y) distance\n" "from the current position (in some cases, last mouse click position).\n" "WARNING: comma is a separator between values." msgstr "" #: appGUI/GUIElements.py:4490 msgid "Ctrl+F" msgstr "" #: appGUI/GUIElements.py:4498 msgid "Save Log" msgstr "" #: appGUI/GUIElements.py:4504 msgid "Clear All" msgstr "" #: appGUI/GUIElements.py:4504 msgid "Shift+Del" msgstr "" #: appGUI/GUIElements.py:4623 appPlugins/ToolShell.py:326 msgid "Type >help< to get started" msgstr "" #: appGUI/GUIElements.py:5251 appGUI/GUIElements.py:5268 msgid "Jog the Y axis." msgstr "" #: appGUI/GUIElements.py:5259 appGUI/MainGUI.py:479 appGUI/MainGUI.py:1102 #: appGUI/MainGUI.py:2481 msgid "Move to Origin" msgstr "" #: appGUI/GUIElements.py:5276 appGUI/GUIElements.py:5284 msgid "Jog the X axis." msgstr "" #: appGUI/GUIElements.py:5294 appGUI/GUIElements.py:5304 msgid "Jog the Z axis." msgstr "" #: appGUI/GUIElements.py:5328 msgid "Zero the CNC X axes at current position." msgstr "" #: appGUI/GUIElements.py:5336 msgid "Zero the CNC Y axes at current position." msgstr "" #: appGUI/GUIElements.py:5341 msgid "Z" msgstr "" #: appGUI/GUIElements.py:5344 msgid "Zero the CNC Z axes at current position." msgstr "" #: appGUI/GUIElements.py:5348 msgid "Do Home" msgstr "" #: appGUI/GUIElements.py:5350 msgid "Perform a homing cycle on all axis." msgstr "" #: appGUI/GUIElements.py:5359 msgid "Zero all CNC axes at current position." msgstr "" #: appGUI/GUIElements.py:5515 appGUI/GUIElements.py:5524 msgid "Idle." msgstr "" #: appGUI/GUIElements.py:5567 msgid "Application started ..." msgstr "" #: appGUI/GUIElements.py:5568 msgid "Hello!" msgstr "" #: appGUI/GUIElements.py:5675 msgid "Run Script ..." msgstr "" #: appGUI/GUIElements.py:5677 appGUI/MainGUI.py:243 msgid "" "Will run the opened Tcl Script thus\n" "enabling the automation of certain\n" "functions of FlatCAM." msgstr "" #: appGUI/GUIElements.py:5685 msgid "Toggle GUI ..." msgstr "" #: appGUI/GUIElements.py:5687 msgid "Will show/hide the GUI." msgstr "" #: appGUI/GUIElements.py:5694 appGUI/MainGUI.py:165 appPlugins/ToolPcbWizard.py:416 #: appPlugins/ToolPcbWizard.py:424 msgid "Open" msgstr "" #: appGUI/GUIElements.py:5698 appGUI/MainGUI.py:170 appGUI/MainGUI.py:1065 #: appGUI/MainGUI.py:2444 appGUI/MainGUI.py:5014 appMain.py:9680 appMain.py:9683 msgid "Open Project" msgstr "" #: appGUI/GUIElements.py:5704 appGUI/MainGUI.py:177 appGUI/MainGUI.py:1060 #: appGUI/MainGUI.py:2439 appMain.py:9563 appMain.py:9568 msgid "Open Gerber" msgstr "" #: appGUI/GUIElements.py:5704 appGUI/MainGUI.py:177 appGUI/MainGUI.py:5011 msgid "Ctrl+G" msgstr "" #: appGUI/GUIElements.py:5709 appGUI/MainGUI.py:182 appGUI/MainGUI.py:1062 #: appGUI/MainGUI.py:2441 appMain.py:9602 appMain.py:9607 msgid "Open Excellon" msgstr "" #: appGUI/GUIElements.py:5709 appGUI/MainGUI.py:182 appGUI/MainGUI.py:859 #: appGUI/MainGUI.py:5010 appGUI/MainGUI.py:5529 msgid "Ctrl+E" msgstr "" #: appGUI/GUIElements.py:5714 appGUI/MainGUI.py:187 appMain.py:9644 appMain.py:9649 msgid "Open G-Code" msgstr "" #: appGUI/GUIElements.py:5724 appGUI/MainGUI.py:374 msgid "Exit" msgstr "" #: appGUI/MainGUI.py:114 appGUI/MainGUI.py:116 appGUI/MainGUI.py:1735 msgid "Toggle Panel" msgstr "" #: appGUI/MainGUI.py:126 msgid "File" msgstr "" #: appGUI/MainGUI.py:131 appGUI/MainGUI.py:5013 msgid "New Project" msgstr "" #: appGUI/MainGUI.py:131 appGUI/MainGUI.py:5013 msgid "Ctrl+N" msgstr "" #: appGUI/MainGUI.py:133 msgid "Will create a new, blank project" msgstr "" #: appGUI/MainGUI.py:138 appGUI/MainGUI.py:1746 appPlugins/ToolLevelling.py:2073 msgid "New" msgstr "" #: appGUI/MainGUI.py:142 appGUI/MainGUI.py:1592 appGUI/MainGUI.py:1748 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:76 #: appObjects/ObjectCollection.py:266 appPlugins/ToolCopperThieving.py:195 #: appPlugins/ToolCopperThieving.py:1380 appPlugins/ToolCopperThieving.py:1391 #: appPlugins/ToolCutOut.py:2290 appPlugins/ToolCutOut.py:2712 #: appPlugins/ToolDblSided.py:741 appPlugins/ToolDblSided.py:956 appPlugins/ToolFilm.py:1284 #: appPlugins/ToolFilm.py:1307 appPlugins/ToolImage.py:221 appPlugins/ToolImage.py:251 #: appPlugins/ToolImage.py:550 appPlugins/ToolIsolation.py:3854 #: appPlugins/ToolIsolation.py:3905 appPlugins/ToolMarkers.py:1581 #: appPlugins/ToolMilling.py:2751 appPlugins/ToolMilling.py:2916 #: appPlugins/ToolMilling.py:3970 appPlugins/ToolNCC.py:4089 appPlugins/ToolNCC.py:4553 #: appPlugins/ToolPaint.py:3311 appPlugins/ToolPanelize.py:134 #: appPlugins/ToolPanelize.py:242 appPlugins/ToolPanelize.py:1183 #: appPlugins/ToolPanelize.py:1234 appPlugins/ToolSolderPaste.py:1651 #: appPlugins/ToolSub.py:895 appPlugins/ToolTransform.py:151 appPlugins/ToolTransform.py:645 msgid "Geometry" msgstr "" #: appGUI/MainGUI.py:142 appGUI/MainGUI.py:717 appGUI/MainGUI.py:836 appGUI/MainGUI.py:4993 #: appGUI/MainGUI.py:5262 appGUI/MainGUI.py:5518 msgid "N" msgstr "" #: appGUI/MainGUI.py:144 msgid "Will create a new, empty Geometry Object." msgstr "" #: appGUI/MainGUI.py:147 appGUI/MainGUI.py:1570 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:94 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:74 #: appObjects/ObjectCollection.py:264 appPlugins/ToolAlignObjects.py:435 #: appPlugins/ToolAlignObjects.py:474 appPlugins/ToolCopperThieving.py:195 #: appPlugins/ToolCopperThieving.py:1380 appPlugins/ToolCopperThieving.py:1391 #: appPlugins/ToolCutOut.py:2289 appPlugins/ToolDblSided.py:741 #: appPlugins/ToolDblSided.py:954 appPlugins/ToolFilm.py:1283 appPlugins/ToolFilm.py:1306 #: appPlugins/ToolImage.py:253 appPlugins/ToolImage.py:550 appPlugins/ToolIsolation.py:3855 #: appPlugins/ToolIsolation.py:3905 appPlugins/ToolMarkers.py:1580 #: appPlugins/ToolNCC.py:4090 appPlugins/ToolNCC.py:4553 appPlugins/ToolPaint.py:3311 #: appPlugins/ToolPanelize.py:128 appPlugins/ToolPanelize.py:242 #: appPlugins/ToolPanelize.py:1183 appPlugins/ToolPanelize.py:1234 #: appPlugins/ToolPanelize.py:1345 appPlugins/ToolRulesCheck.py:1195 #: appPlugins/ToolSub.py:830 appPlugins/ToolTransform.py:151 appPlugins/ToolTransform.py:643 #: defaults.py:631 msgid "Gerber" msgstr "" #: appGUI/MainGUI.py:147 appGUI/MainGUI.py:760 appGUI/MainGUI.py:850 appGUI/MainGUI.py:4987 #: appGUI/MainGUI.py:5253 appGUI/MainGUI.py:5512 msgid "B" msgstr "" #: appGUI/MainGUI.py:149 msgid "Will create a new, empty Gerber Object." msgstr "" #: appGUI/MainGUI.py:152 appGUI/MainGUI.py:1581 appGUI/MainGUI.py:1752 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:98 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:75 #: appObjects/ObjectCollection.py:265 appPlugins/ToolAlignObjects.py:436 #: appPlugins/ToolAlignObjects.py:475 appPlugins/ToolCopperThieving.py:195 #: appPlugins/ToolCopperThieving.py:1380 appPlugins/ToolCopperThieving.py:1391 #: appPlugins/ToolDblSided.py:741 appPlugins/ToolDblSided.py:955 #: appPlugins/ToolDblSided.py:983 appPlugins/ToolFilm.py:1622 #: appPlugins/ToolIsolation.py:3905 appPlugins/ToolMilling.py:3971 #: appPlugins/ToolNCC.py:4553 appPlugins/ToolPaint.py:3311 appPlugins/ToolPanelize.py:131 #: appPlugins/ToolPanelize.py:242 appPlugins/ToolPanelize.py:1183 #: appPlugins/ToolPunchGerber.py:2162 appPlugins/ToolPunchGerber.py:2176 #: appPlugins/ToolRulesCheck.py:1202 appPlugins/ToolRulesCheck.py:1400 #: appPlugins/ToolTransform.py:151 appPlugins/ToolTransform.py:644 msgid "Excellon" msgstr "" #: appGUI/MainGUI.py:152 appGUI/MainGUI.py:4991 msgid "L" msgstr "" #: appGUI/MainGUI.py:154 msgid "Will create a new, empty Excellon Object." msgstr "" #: appGUI/MainGUI.py:159 appObjects/ObjectCollection.py:269 msgid "Document" msgstr "" #: appGUI/MainGUI.py:159 appGUI/MainGUI.py:791 appGUI/MainGUI.py:847 appGUI/MainGUI.py:5255 #: appGUI/MainGUI.py:5375 appGUI/MainGUI.py:5514 msgid "D" msgstr "" #: appGUI/MainGUI.py:161 msgid "Will create a new, empty Document Object." msgstr "" #: appGUI/MainGUI.py:170 appGUI/MainGUI.py:5014 msgid "Ctrl+O" msgstr "" #: appGUI/MainGUI.py:194 msgid "Open Config" msgstr "" #: appGUI/MainGUI.py:199 msgid "Recent projects" msgstr "" #: appGUI/MainGUI.py:201 msgid "Recent files" msgstr "" #: appGUI/MainGUI.py:204 appGUI/MainGUI.py:952 appGUI/MainGUI.py:1705 #: appGUI/ObjectUI.py:1551 appObjects/ObjectCollection.py:413 msgid "Save" msgstr "" #: appGUI/MainGUI.py:208 appGUI/MainGUI.py:2446 appGUI/MainGUI.py:5017 msgid "Save Project" msgstr "" #: appGUI/MainGUI.py:214 appGUI/MainGUI.py:5069 msgid "Save Project As" msgstr "" #: appGUI/MainGUI.py:214 appGUI/MainGUI.py:5069 msgid "Ctrl+Shift+S" msgstr "" #: appGUI/MainGUI.py:229 msgid "Scripting" msgstr "" #: appGUI/MainGUI.py:233 appGUI/MainGUI.py:1133 appGUI/MainGUI.py:2510 msgid "New Script" msgstr "" #: appGUI/MainGUI.py:235 appGUI/MainGUI.py:1135 appGUI/MainGUI.py:2512 msgid "Open Script" msgstr "" #: appGUI/MainGUI.py:238 msgid "Open Example" msgstr "" #: appGUI/MainGUI.py:241 appGUI/MainGUI.py:1137 appGUI/MainGUI.py:2514 msgid "Run Script" msgstr "" #: appGUI/MainGUI.py:241 appGUI/MainGUI.py:5030 msgid "Shift+S" msgstr "" #: appGUI/MainGUI.py:258 msgid "Import" msgstr "" #: appGUI/MainGUI.py:261 msgid "SVG as Geometry Object" msgstr "" #: appGUI/MainGUI.py:265 msgid "SVG as Gerber Object" msgstr "" #: appGUI/MainGUI.py:271 msgid "DXF as Geometry Object" msgstr "" #: appGUI/MainGUI.py:275 msgid "DXF as Gerber Object" msgstr "" #: appGUI/MainGUI.py:280 msgid "HPGL2 as Geometry Object" msgstr "" #: appGUI/MainGUI.py:286 appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:19 #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:19 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:20 appPlugins/ToolFilm.py:1657 msgid "Export" msgstr "" #: appGUI/MainGUI.py:291 appMain.py:9791 appMain.py:9796 appPlugins/ToolQRCode.py:642 #: appPlugins/ToolQRCode.py:647 msgid "Export SVG" msgstr "" #: appGUI/MainGUI.py:296 appMain.py:10145 appMain.py:10150 msgid "Export DXF" msgstr "" #: appGUI/MainGUI.py:303 appPlugins/ToolQRCode.py:593 appPlugins/ToolQRCode.py:598 msgid "Export PNG" msgstr "" #: appGUI/MainGUI.py:305 msgid "" "Will export an image in PNG format,\n" "the saved image will contain the visual \n" "information currently in FlatCAM Plot Area." msgstr "" #: appGUI/MainGUI.py:315 appMain.py:10042 appMain.py:10047 msgid "Export Excellon" msgstr "" #: appGUI/MainGUI.py:317 msgid "" "Will export an Excellon Object as Excellon file,\n" "the coordinates format, the file units and zeros\n" "are set in Preferences -> Excellon Export." msgstr "" #: appGUI/MainGUI.py:325 appMain.py:10087 appMain.py:10092 msgid "Export Gerber" msgstr "" #: appGUI/MainGUI.py:327 msgid "" "Will export an Gerber Object as Gerber file,\n" "the coordinates format, the file units and zeros\n" "are set in Preferences -> Gerber Export." msgstr "" #: appGUI/MainGUI.py:337 msgid "Backup" msgstr "" #: appGUI/MainGUI.py:342 msgid "Import Preferences from file" msgstr "" #: appGUI/MainGUI.py:349 msgid "Export Preferences to file" msgstr "" #: appGUI/MainGUI.py:358 appGUI/preferences/PreferencesUIManager.py:1383 msgid "Save Preferences" msgstr "" #: appGUI/MainGUI.py:365 appGUI/MainGUI.py:5015 msgid "Print (PDF)" msgstr "" #: appGUI/MainGUI.py:365 appGUI/MainGUI.py:5015 msgid "Ctrl+P" msgstr "" #: appGUI/MainGUI.py:382 appGUI/MainGUI.py:946 appGUI/MainGUI.py:1907 msgid "Edit" msgstr "" #: appGUI/MainGUI.py:387 msgid "Edit Object" msgstr "" #: appGUI/MainGUI.py:387 appGUI/MainGUI.py:732 appGUI/MainGUI.py:844 appGUI/MainGUI.py:4988 #: appGUI/MainGUI.py:5256 appGUI/MainGUI.py:5515 msgid "E" msgstr "" #: appGUI/MainGUI.py:400 msgid "Conversion" msgstr "" #: appGUI/MainGUI.py:404 msgid "Convert Single to MultiGeo" msgstr "" #: appGUI/MainGUI.py:406 msgid "" "Will convert a Geometry object from single_geometry type\n" "to a multi_geometry type." msgstr "" #: appGUI/MainGUI.py:411 msgid "Convert Multi to SingleGeo" msgstr "" #: appGUI/MainGUI.py:413 msgid "" "Will convert a Geometry object from multi_geometry type\n" "to a single_geometry type." msgstr "" #: appGUI/MainGUI.py:420 msgid "Convert Any to Geo" msgstr "" #: appGUI/MainGUI.py:423 msgid "Convert Any to Gerber" msgstr "" #: appGUI/MainGUI.py:426 msgid "Convert Any to Excellon" msgstr "" #: appGUI/MainGUI.py:431 msgid "Join Objects" msgstr "" #: appGUI/MainGUI.py:434 msgid "Join Geo/Gerber/Exc -> Geo" msgstr "" #: appGUI/MainGUI.py:436 msgid "" "Merge a selection of objects, which can be of type:\n" "- Gerber\n" "- Excellon\n" "- Geometry\n" "into a new combo Geometry object." msgstr "" #: appGUI/MainGUI.py:444 msgid "Join Excellon(s) -> Excellon" msgstr "" #: appGUI/MainGUI.py:446 msgid "Merge a selection of Excellon objects into a new combo Excellon object." msgstr "" #: appGUI/MainGUI.py:450 msgid "Join Gerber(s) -> Gerber" msgstr "" #: appGUI/MainGUI.py:452 msgid "Merge a selection of Gerber objects into a new combo Gerber object." msgstr "" #: appGUI/MainGUI.py:467 appGUI/MainGUI.py:752 appGUI/MainGUI.py:811 appGUI/MainGUI.py:870 msgid "DEL" msgstr "" #: appGUI/MainGUI.py:473 appGUI/MainGUI.py:1914 msgid "Num Move" msgstr "" #: appGUI/MainGUI.py:476 appGUI/MainGUI.py:1100 appGUI/MainGUI.py:2479 #: appGUI/MainGUI.py:4994 msgid "Set Origin" msgstr "" #: appGUI/MainGUI.py:476 appGUI/MainGUI.py:705 appGUI/MainGUI.py:4994 appGUI/MainGUI.py:5263 msgid "O" msgstr "" #: appGUI/MainGUI.py:479 msgid "Shift+O" msgstr "" #: appGUI/MainGUI.py:482 appGUI/MainGUI.py:1104 appGUI/MainGUI.py:2483 appMain.py:5564 #: appMain.py:5578 msgid "Custom Origin" msgstr "" #: appGUI/MainGUI.py:486 appGUI/MainGUI.py:1107 appGUI/MainGUI.py:2486 msgid "Jump to Location" msgstr "" #: appGUI/MainGUI.py:486 appGUI/MainGUI.py:4990 appGUI/MainGUI.py:5258 #: appGUI/MainGUI.py:5376 appGUI/MainGUI.py:5516 msgid "J" msgstr "" #: appGUI/MainGUI.py:489 appGUI/MainGUI.py:1109 appGUI/MainGUI.py:2488 #: appGUI/MainGUI.py:5026 msgid "Locate in Object" msgstr "" #: appGUI/MainGUI.py:489 appGUI/MainGUI.py:5026 msgid "Shift+J" msgstr "" #: appGUI/MainGUI.py:495 appMain.py:4989 msgid "Toggle Units" msgstr "" #: appGUI/MainGUI.py:495 appGUI/MainGUI.py:796 appGUI/MainGUI.py:4995 appGUI/MainGUI.py:5378 msgid "Q" msgstr "" #: appGUI/MainGUI.py:504 appGUI/MainGUI.py:1404 #: appGUI/preferences/PreferencesUIManager.py:1111 #: appGUI/preferences/PreferencesUIManager.py:1222 #: appGUI/preferences/PreferencesUIManager.py:1333 #: appGUI/preferences/PreferencesUIManager.py:1421 appMain.py:6535 appMain.py:6540 #: appMain.py:6560 msgid "Preferences" msgstr "" #: appGUI/MainGUI.py:504 appGUI/MainGUI.py:5028 msgid "Shift+P" msgstr "" #: appGUI/MainGUI.py:510 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:21 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:20 #: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:21 #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:23 appObjects/AppObjectTemplate.py:545 #: appPlugins/ToolImage.py:701 appPlugins/ToolReport.py:170 msgid "Options" msgstr "" #: appGUI/MainGUI.py:513 msgid "Rotate Selection" msgstr "" #: appGUI/MainGUI.py:513 msgid "Shift+(R)" msgstr "" #: appGUI/MainGUI.py:519 appGUI/MainGUI.py:5032 msgid "Skew on X axis" msgstr "" #: appGUI/MainGUI.py:519 appGUI/MainGUI.py:5032 appGUI/MainGUI.py:5272 msgid "Shift+X" msgstr "" #: appGUI/MainGUI.py:522 appGUI/MainGUI.py:5033 msgid "Skew on Y axis" msgstr "" #: appGUI/MainGUI.py:522 appGUI/MainGUI.py:5033 appGUI/MainGUI.py:5273 msgid "Shift+Y" msgstr "" #: appGUI/MainGUI.py:528 msgid "Flip on X axis" msgstr "" #: appGUI/MainGUI.py:531 msgid "Flip on Y axis" msgstr "" #: appGUI/MainGUI.py:537 msgid "View source" msgstr "" #: appGUI/MainGUI.py:537 appGUI/MainGUI.py:5054 msgid "Alt+S" msgstr "" #: appGUI/MainGUI.py:540 appGUI/MainGUI.py:5009 msgid "Ctrl+D" msgstr "" #: appGUI/MainGUI.py:546 msgid "Experimental" msgstr "" #: appGUI/MainGUI.py:550 appMain.py:6718 msgid "3D Area" msgstr "" #: appGUI/MainGUI.py:557 appGUI/MainGUI.py:1731 msgid "View" msgstr "" #: appGUI/MainGUI.py:560 appGUI/MainGUI.py:5059 msgid "Enable all" msgstr "" #: appGUI/MainGUI.py:560 appGUI/MainGUI.py:5059 msgid "Alt+1" msgstr "" #: appGUI/MainGUI.py:563 appGUI/MainGUI.py:5060 msgid "Disable all" msgstr "" #: appGUI/MainGUI.py:563 appGUI/MainGUI.py:5060 msgid "Alt+2" msgstr "" #: appGUI/MainGUI.py:566 msgid "Enable non-selected" msgstr "" #: appGUI/MainGUI.py:566 appGUI/MainGUI.py:5061 msgid "Alt+3" msgstr "" #: appGUI/MainGUI.py:569 msgid "Disable non-selected" msgstr "" #: appGUI/MainGUI.py:569 appGUI/MainGUI.py:5062 msgid "Alt+4" msgstr "" #: appGUI/MainGUI.py:575 appGUI/MainGUI.py:1123 appGUI/MainGUI.py:1738 #: appGUI/MainGUI.py:2502 appGUI/MainGUI.py:5000 msgid "Zoom Fit" msgstr "" #: appGUI/MainGUI.py:575 appGUI/MainGUI.py:5000 msgid "V" msgstr "" #: appGUI/MainGUI.py:578 appGUI/MainGUI.py:1119 appGUI/MainGUI.py:2498 #: appGUI/MainGUI.py:5004 msgid "Zoom In" msgstr "" #: appGUI/MainGUI.py:578 appGUI/MainGUI.py:5004 msgid "=" msgstr "" #: appGUI/MainGUI.py:581 appGUI/MainGUI.py:1121 appGUI/MainGUI.py:2500 #: appGUI/MainGUI.py:5003 msgid "Zoom Out" msgstr "" #: appGUI/MainGUI.py:581 appGUI/MainGUI.py:5003 msgid "-" msgstr "" #: appGUI/MainGUI.py:587 msgid "Redraw All" msgstr "" #: appGUI/MainGUI.py:587 appGUI/MainGUI.py:5077 msgid "F5" msgstr "" #: appGUI/MainGUI.py:592 appGUI/MainGUI.py:5023 msgid "Toggle Code Editor" msgstr "" #: appGUI/MainGUI.py:592 appGUI/MainGUI.py:5023 msgid "Shift+E" msgstr "" #: appGUI/MainGUI.py:596 msgid "Toggle FullScreen" msgstr "" #: appGUI/MainGUI.py:596 appGUI/MainGUI.py:5063 msgid "Alt+F10" msgstr "" #: appGUI/MainGUI.py:599 appGUI/MainGUI.py:5018 msgid "Toggle Plot Area" msgstr "" #: appGUI/MainGUI.py:599 appGUI/MainGUI.py:5018 msgid "Ctrl+F10" msgstr "" #: appGUI/MainGUI.py:602 msgid "Toggle Project/Properties/Tool" msgstr "" #: appGUI/MainGUI.py:602 appGUI/MainGUI.py:5080 msgid "`" msgstr "" #: appGUI/MainGUI.py:607 msgid "Toggle Grid Snap" msgstr "" #: appGUI/MainGUI.py:607 appGUI/MainGUI.py:4989 msgid "G" msgstr "" #: appGUI/MainGUI.py:610 appGUI/MainGUI.py:5024 msgid "Toggle Grid Lines" msgstr "" #: appGUI/MainGUI.py:610 appGUI/MainGUI.py:5024 msgid "Shift+G" msgstr "" #: appGUI/MainGUI.py:613 msgid "Toggle Axis" msgstr "" #: appGUI/MainGUI.py:613 appGUI/MainGUI.py:5021 msgid "Shift+A" msgstr "" #: appGUI/MainGUI.py:616 msgid "Toggle Workspace" msgstr "" #: appGUI/MainGUI.py:616 appGUI/MainGUI.py:5031 msgid "Shift+W" msgstr "" #: appGUI/MainGUI.py:619 appGUI/MainGUI.py:5025 msgid "Toggle HUD" msgstr "" #: appGUI/MainGUI.py:619 appGUI/MainGUI.py:5025 msgid "Shift+H" msgstr "" #: appGUI/MainGUI.py:624 msgid "Error Log" msgstr "" #: appGUI/MainGUI.py:629 msgid "Objects" msgstr "" #: appGUI/MainGUI.py:636 appObjects/ObjectCollection.py:1204 #: appObjects/ObjectCollection.py:1251 appPlugins/ToolIsolation.py:3940 #: appPlugins/ToolPunchGerber.py:2353 msgid "Deselect All" msgstr "" #: appGUI/MainGUI.py:641 appGUI/ObjectUI.py:374 appGUI/ObjectUI.py:780 #: appGUI/ObjectUI.py:1106 appGUI/ObjectUI.py:1520 msgid "Plugins" msgstr "" #: appGUI/MainGUI.py:645 appGUI/MainGUI.py:1131 appGUI/MainGUI.py:2508 msgid "Command Line" msgstr "" #: appGUI/MainGUI.py:645 appGUI/MainGUI.py:735 appGUI/MainGUI.py:853 appGUI/MainGUI.py:4998 #: appGUI/MainGUI.py:5266 appGUI/MainGUI.py:5521 msgid "S" msgstr "" #: appGUI/MainGUI.py:650 msgid "Help" msgstr "" #: appGUI/MainGUI.py:653 msgid "Online Help" msgstr "" #: appGUI/MainGUI.py:653 appGUI/MainGUI.py:5074 msgid "F1" msgstr "" #: appGUI/MainGUI.py:660 appMain.py:3963 appMain.py:3972 msgid "Bookmarks Manager" msgstr "" #: appGUI/MainGUI.py:665 msgid "Report a bug" msgstr "" #: appGUI/MainGUI.py:669 msgid "Excellon Specification" msgstr "" #: appGUI/MainGUI.py:672 msgid "Gerber Specification" msgstr "" #: appGUI/MainGUI.py:678 msgid "Shortcuts List" msgstr "" #: appGUI/MainGUI.py:678 appGUI/MainGUI.py:4983 msgid "F3" msgstr "" #: appGUI/MainGUI.py:681 msgid "YouTube Channel" msgstr "" #: appGUI/MainGUI.py:681 appGUI/MainGUI.py:5076 msgid "F4" msgstr "" #: appGUI/MainGUI.py:687 msgid "Donate" msgstr "" #: appGUI/MainGUI.py:691 appMain.py:3740 msgid "How To" msgstr "" #: appGUI/MainGUI.py:695 appMain.py:3217 msgid "About" msgstr "" #: appGUI/MainGUI.py:700 appGUI/MainGUI.py:1811 msgid "Geo Editor" msgstr "" #: appGUI/MainGUI.py:705 appGUI/MainGUI.py:1251 appGUI/MainGUI.py:2628 msgid "Add Circle" msgstr "" #: appGUI/MainGUI.py:709 appGUI/MainGUI.py:1253 appGUI/MainGUI.py:2630 msgid "Add Arc" msgstr "" #: appGUI/MainGUI.py:709 appGUI/MainGUI.py:788 appGUI/MainGUI.py:830 appGUI/MainGUI.py:5252 #: appGUI/MainGUI.py:5373 appGUI/MainGUI.py:5511 msgid "A" msgstr "" #: appGUI/MainGUI.py:713 appGUI/MainGUI.py:1255 appGUI/MainGUI.py:2632 msgid "Add Rectangle" msgstr "" #: appGUI/MainGUI.py:713 appGUI/MainGUI.py:804 appGUI/MainGUI.py:4997 appGUI/MainGUI.py:5265 #: appGUI/MainGUI.py:5379 appGUI/MainGUI.py:5520 msgid "R" msgstr "" #: appGUI/MainGUI.py:717 appGUI/MainGUI.py:1261 appGUI/MainGUI.py:2638 msgid "Add Polygon" msgstr "" #: appGUI/MainGUI.py:721 appGUI/MainGUI.py:1259 appGUI/MainGUI.py:2636 msgid "Add Path" msgstr "" #: appGUI/MainGUI.py:721 appGUI/MainGUI.py:827 appGUI/MainGUI.py:4996 appGUI/MainGUI.py:5264 #: appGUI/MainGUI.py:5519 appGUI/ObjectUI.py:1490 appGUI/ObjectUI.py:1501 msgid "P" msgstr "" #: appGUI/MainGUI.py:725 appGUI/MainGUI.py:1264 appGUI/MainGUI.py:2641 msgid "Add Text" msgstr "" #: appGUI/MainGUI.py:725 appGUI/MainGUI.py:833 appGUI/MainGUI.py:4999 appGUI/MainGUI.py:5267 #: appGUI/MainGUI.py:5380 appGUI/MainGUI.py:5522 appGUI/MainGUI.py:5523 msgid "T" msgstr "" #: appGUI/MainGUI.py:729 appGUI/MainGUI.py:1276 appGUI/MainGUI.py:2651 msgid "Polygon Union" msgstr "" #: appGUI/MainGUI.py:729 appGUI/MainGUI.py:5268 msgid "U" msgstr "" #: appGUI/MainGUI.py:732 appGUI/MainGUI.py:1281 appGUI/MainGUI.py:2656 msgid "Polygon Intersection" msgstr "" #: appGUI/MainGUI.py:735 appGUI/MainGUI.py:2658 msgid "Polygon Subtraction" msgstr "" #: appGUI/MainGUI.py:739 appGUI/MainGUI.py:1844 appGUI/MainGUI.py:2660 msgid "Alt Subtraction" msgstr "" #: appGUI/MainGUI.py:744 appGUI/MainGUI.py:1295 appGUI/MainGUI.py:2664 msgid "Cut Path" msgstr "" #: appGUI/MainGUI.py:749 msgid "Copy Geom" msgstr "" #: appGUI/MainGUI.py:749 appGUI/MainGUI.py:808 appGUI/MainGUI.py:867 appGUI/MainGUI.py:5254 #: appGUI/MainGUI.py:5374 appGUI/MainGUI.py:5513 msgid "C" msgstr "" #: appGUI/MainGUI.py:757 appGUI/MainGUI.py:817 appGUI/MainGUI.py:875 appGUI/MainGUI.py:4992 #: appGUI/MainGUI.py:5260 appGUI/MainGUI.py:5261 appGUI/MainGUI.py:5377 #: appGUI/MainGUI.py:5517 msgid "M" msgstr "" #: appGUI/MainGUI.py:768 appGUI/MainGUI.py:5257 msgid "I" msgstr "" #: appGUI/MainGUI.py:772 appGUI/MainGUI.py:862 appGUI/MainGUI.py:5053 appGUI/MainGUI.py:5274 #: appGUI/MainGUI.py:5533 msgid "Alt+R" msgstr "" #: appGUI/MainGUI.py:777 appGUI/MainGUI.py:5259 msgid "Toggle Corner Snap" msgstr "" #: appGUI/MainGUI.py:777 appGUI/MainGUI.py:5259 msgid "K" msgstr "" #: appGUI/MainGUI.py:788 appGUI/MainGUI.py:1227 appGUI/MainGUI.py:1892 #: appGUI/MainGUI.py:2604 appGUI/MainGUI.py:5373 msgid "Add Drill Array" msgstr "" #: appGUI/MainGUI.py:791 appGUI/MainGUI.py:1225 appGUI/MainGUI.py:1890 #: appGUI/MainGUI.py:2602 appGUI/MainGUI.py:5375 msgid "Add Drill" msgstr "" #: appGUI/MainGUI.py:796 appGUI/MainGUI.py:1231 appGUI/MainGUI.py:1897 #: appGUI/MainGUI.py:2610 appGUI/MainGUI.py:5378 msgid "Add Slot Array" msgstr "" #: appGUI/MainGUI.py:799 appGUI/MainGUI.py:1229 appGUI/MainGUI.py:1895 #: appGUI/MainGUI.py:2608 appGUI/MainGUI.py:5381 msgid "Add Slot" msgstr "" #: appGUI/MainGUI.py:799 appGUI/MainGUI.py:5381 msgid "W" msgstr "" #: appGUI/MainGUI.py:804 appGUI/MainGUI.py:1233 appGUI/MainGUI.py:1900 #: appGUI/MainGUI.py:2606 appGUI/MainGUI.py:5379 msgid "Resize Drill" msgstr "" #: appGUI/MainGUI.py:827 appGUI/MainGUI.py:1313 appGUI/MainGUI.py:2682 #: appGUI/MainGUI.py:5519 msgid "Add Pad" msgstr "" #: appGUI/MainGUI.py:833 appGUI/MainGUI.py:1317 appGUI/MainGUI.py:2686 #: appGUI/MainGUI.py:5522 msgid "Add Track" msgstr "" #: appGUI/MainGUI.py:836 appGUI/MainGUI.py:1319 appGUI/MainGUI.py:2688 #: appGUI/MainGUI.py:5518 msgid "Add Region" msgstr "" #: appGUI/MainGUI.py:841 appGUI/MainGUI.py:1321 appGUI/MainGUI.py:1867 #: appGUI/MainGUI.py:2690 msgid "Poligonize" msgstr "" #: appGUI/MainGUI.py:841 appGUI/MainGUI.py:5049 appGUI/MainGUI.py:5532 msgid "Alt+N" msgstr "" #: appGUI/MainGUI.py:844 appGUI/MainGUI.py:5515 msgid "Add SemiDisc" msgstr "" #: appGUI/MainGUI.py:847 appGUI/MainGUI.py:5514 msgid "Add Disc" msgstr "" #: appGUI/MainGUI.py:856 appGUI/MainGUI.py:1334 appGUI/MainGUI.py:1879 #: appGUI/MainGUI.py:2703 msgid "Mark Area" msgstr "" #: appGUI/MainGUI.py:856 appGUI/MainGUI.py:5036 appGUI/MainGUI.py:5531 msgid "Alt+A" msgstr "" #: appGUI/MainGUI.py:859 appGUI/MainGUI.py:1272 appGUI/MainGUI.py:1339 #: appGUI/MainGUI.py:1834 appGUI/MainGUI.py:1881 appGUI/MainGUI.py:2647 #: appGUI/MainGUI.py:2708 msgid "Eraser" msgstr "" #: appGUI/MainGUI.py:862 appMain.py:7065 appMain.py:7119 appMain.py:7167 msgid "Transform" msgstr "" #: appGUI/MainGUI.py:892 msgid "Enable Plot" msgstr "" #: appGUI/MainGUI.py:894 msgid "Disable Plot" msgstr "" #: appGUI/MainGUI.py:898 appGUI/MainGUI.py:1766 msgid "Set Color" msgstr "" #: appGUI/MainGUI.py:901 appGUI/MainGUI.py:1769 appMain.py:9111 msgid "Red" msgstr "" #: appGUI/MainGUI.py:904 appGUI/MainGUI.py:1772 appMain.py:9113 msgid "Blue" msgstr "" #: appGUI/MainGUI.py:907 appGUI/MainGUI.py:1775 appMain.py:9116 msgid "Yellow" msgstr "" #: appGUI/MainGUI.py:910 appGUI/MainGUI.py:1778 appMain.py:9118 msgid "Green" msgstr "" #: appGUI/MainGUI.py:913 appGUI/MainGUI.py:1781 appMain.py:9120 msgid "Purple" msgstr "" #: appGUI/MainGUI.py:916 appGUI/MainGUI.py:1784 appMain.py:9122 msgid "Brown" msgstr "" #: appGUI/MainGUI.py:919 appGUI/MainGUI.py:1787 appMain.py:9124 msgid "Indigo" msgstr "" #: appGUI/MainGUI.py:922 appGUI/MainGUI.py:1790 appMain.py:9126 appMain.py:9204 msgid "White" msgstr "" #: appGUI/MainGUI.py:925 appGUI/MainGUI.py:1793 appMain.py:9128 msgid "Black" msgstr "" #: appGUI/MainGUI.py:935 appGUI/MainGUI.py:1803 appMain.py:9169 msgid "Opacity" msgstr "" #: appGUI/MainGUI.py:938 appGUI/MainGUI.py:1806 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:45 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:48 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:65 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:67 appMain.py:9143 #: appPlugins/ToolDrilling.py:2474 appPlugins/ToolIsolation.py:3464 #: appPlugins/ToolMilling.py:4127 appPlugins/ToolNCC.py:4172 appPlugins/ToolPaint.py:3053 msgid "Default" msgstr "" #: appGUI/MainGUI.py:943 msgid "View Source" msgstr "" #: appGUI/MainGUI.py:956 appGUI/MainGUI.py:969 appGUI/MainGUI.py:1488 appGUI/MainGUI.py:1920 #: appMain.py:2693 appMain.py:2961 appMain.py:8604 msgid "Properties" msgstr "" #: appGUI/MainGUI.py:969 appGUI/MainGUI.py:1472 appGUI/MainGUI.py:1755 appMain.py:2699 #: appMain.py:2964 appMain.py:10585 msgid "Project" msgstr "" #: appGUI/MainGUI.py:986 msgid "File Toolbar" msgstr "" #: appGUI/MainGUI.py:991 msgid "Edit Toolbar" msgstr "" #: appGUI/MainGUI.py:996 msgid "View Toolbar" msgstr "" #: appGUI/MainGUI.py:1001 msgid "Shell Toolbar" msgstr "" #: appGUI/MainGUI.py:1006 msgid "Plugin Toolbar" msgstr "" #: appGUI/MainGUI.py:1011 msgid "Excellon Editor Toolbar" msgstr "" #: appGUI/MainGUI.py:1018 msgid "Geometry Editor Toolbar" msgstr "" #: appGUI/MainGUI.py:1023 msgid "Gerber Editor Toolbar" msgstr "" #: appGUI/MainGUI.py:1029 appGUI/MainGUI.py:2327 msgid "Delta Coordinates Toolbar" msgstr "" #: appGUI/MainGUI.py:1033 appGUI/MainGUI.py:2335 msgid "Coordinates Toolbar" msgstr "" #: appGUI/MainGUI.py:1037 appGUI/MainGUI.py:2343 msgid "Grid Toolbar" msgstr "" #: appGUI/MainGUI.py:1047 appGUI/MainGUI.py:2351 msgid "Status Toolbar" msgstr "" #: appGUI/MainGUI.py:1067 msgid "Save project" msgstr "" #: appGUI/MainGUI.py:1073 appGUI/MainGUI.py:2452 #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:21 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:18 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:20 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:21 appMain.py:2696 appMain.py:2959 msgid "Editor" msgstr "" #: appGUI/MainGUI.py:1096 appGUI/MainGUI.py:2475 appGUI/MainGUI.py:5012 #: appGUI/MainGUI.py:5277 msgid "Distance Tool" msgstr "" #: appGUI/MainGUI.py:1098 appGUI/MainGUI.py:2477 msgid "Distance Min Tool" msgstr "" #: appGUI/MainGUI.py:1115 appGUI/MainGUI.py:1742 appGUI/MainGUI.py:2494 msgid "Replot" msgstr "" #: appGUI/MainGUI.py:1117 appGUI/MainGUI.py:1740 appGUI/MainGUI.py:2496 msgid "Clear Plot" msgstr "" #: appGUI/MainGUI.py:1147 appGUI/MainGUI.py:2524 appGUI/ObjectUI.py:1524 #: appPlugins/ToolLevelling.py:167 appPlugins/ToolLevelling.py:1717 msgid "Levelling" msgstr "" #: appGUI/MainGUI.py:1156 appGUI/MainGUI.py:2533 appGUI/ObjectUI.py:237 #: appGUI/ObjectUI.py:444 appPlugins/ToolFollow.py:114 appPlugins/ToolFollow.py:650 msgid "Follow" msgstr "" #: appGUI/MainGUI.py:1167 appGUI/MainGUI.py:2544 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:117 appPlugins/ToolCutOut.py:2282 msgid "Panel" msgstr "" #: appGUI/MainGUI.py:1169 appGUI/MainGUI.py:2546 appGUI/ObjectUI.py:415 #: appPlugins/ToolFilm.py:142 appPlugins/ToolFilm.py:1222 msgid "Film" msgstr "" #: appGUI/MainGUI.py:1171 appGUI/MainGUI.py:2548 appPlugins/ToolDblSided.py:95 #: appPlugins/ToolDblSided.py:673 msgid "2-Sided" msgstr "" #: appGUI/MainGUI.py:1176 appGUI/MainGUI.py:2553 appGUI/MainGUI.py:5036 #: appPlugins/ToolAlignObjects.py:19 appPlugins/ToolAlignObjects.py:386 msgid "Align Objects" msgstr "" #: appGUI/MainGUI.py:1183 appGUI/MainGUI.py:2560 appGUI/MainGUI.py:5040 #: appPlugins/ToolExtract.py:38 appPlugins/ToolExtract.py:222 appPlugins/ToolExtract.py:986 msgid "Extract" msgstr "" #: appGUI/MainGUI.py:1185 appGUI/MainGUI.py:2562 appGUI/MainGUI.py:5045 #: appPlugins/ToolCopperThieving.py:128 appPlugins/ToolCopperThieving.py:1251 msgid "Copper Thieving" msgstr "" #: appGUI/MainGUI.py:1187 appGUI/MainGUI.py:2564 appGUI/MainGUI.py:5037 #: appPlugins/ToolMarkers.py:143 appPlugins/ToolMarkers.py:1216 msgid "Markers" msgstr "" #: appGUI/MainGUI.py:1189 appGUI/MainGUI.py:2566 appGUI/MainGUI.py:5043 #: appPlugins/ToolPunchGerber.py:66 appPlugins/ToolPunchGerber.py:257 #: appPlugins/ToolPunchGerber.py:1984 appPlugins/ToolPunchGerber.py:2364 msgid "Punch Gerber" msgstr "" #: appGUI/MainGUI.py:1191 appGUI/MainGUI.py:2568 appGUI/MainGUI.py:5038 #: appPlugins/ToolCalculators.py:85 appPlugins/ToolCalculators.py:501 msgid "Calculators" msgstr "" #: appGUI/MainGUI.py:1223 appGUI/MainGUI.py:1249 appGUI/MainGUI.py:1311 #: appGUI/MainGUI.py:2600 appGUI/MainGUI.py:2626 appGUI/MainGUI.py:2680 msgid "Select" msgstr "" #: appGUI/MainGUI.py:1268 appGUI/MainGUI.py:2643 msgid "Add Buffer" msgstr "" #: appGUI/MainGUI.py:1270 appGUI/MainGUI.py:2645 msgid "Paint Shape" msgstr "" #: appGUI/MainGUI.py:1278 appGUI/MainGUI.py:2653 msgid "Polygon Explode" msgstr "" #: appGUI/MainGUI.py:1284 msgid "" "Polygon Subtraction. First selected is the target.\n" "The rest of the selected is subtracted from the first.\n" "First selected is replaced by the result." msgstr "" #: appGUI/MainGUI.py:1289 msgid "" "Alt Subtraction. First selected is the target.\n" "The rest of the selected is subtracted from the first.\n" "First selected is kept besides the result." msgstr "" #: appGUI/MainGUI.py:1297 msgid "Copy Shape(s)" msgstr "" #: appGUI/MainGUI.py:1302 appGUI/MainGUI.py:1347 appGUI/MainGUI.py:1848 #: appGUI/MainGUI.py:1885 appGUI/MainGUI.py:2670 appGUI/MainGUI.py:2716 #: appGUI/MainGUI.py:5055 appGUI/ObjectUI.py:92 appGUI/ObjectUI.py:147 msgid "Transformations" msgstr "" #: appGUI/MainGUI.py:1305 appGUI/MainGUI.py:2674 msgid "Move Objects" msgstr "" #: appGUI/MainGUI.py:1324 appGUI/MainGUI.py:1869 appGUI/MainGUI.py:2693 msgid "SemiDisc" msgstr "" #: appGUI/MainGUI.py:1326 appGUI/MainGUI.py:1871 appGUI/MainGUI.py:2695 msgid "Disc" msgstr "" #: appGUI/MainGUI.py:1336 appGUI/MainGUI.py:2705 msgid "Import Shape" msgstr "" #: appGUI/MainGUI.py:1358 msgid "Snap to grid" msgstr "" #: appGUI/MainGUI.py:1361 msgid "Grid X snapping distance" msgstr "" #: appGUI/MainGUI.py:1366 msgid "" "When active, value on Grid_X\n" "is copied to the Grid_Y value." msgstr "" #: appGUI/MainGUI.py:1373 msgid "Grid Y snapping distance" msgstr "" #: appGUI/MainGUI.py:1384 msgid "Snap to corner" msgstr "" #: appGUI/MainGUI.py:1388 appGUI/preferences/general/GeneralAPPSetGroupUI.py:76 msgid "Max. magnet distance" msgstr "" #: appGUI/MainGUI.py:1398 msgid "Toggle the display of axis on canvas" msgstr "" #: appGUI/MainGUI.py:1410 msgid "HUD (Heads up display)" msgstr "" #: appGUI/MainGUI.py:1416 appGUI/preferences/general/GeneralAPPSetGroupUI.py:104 msgid "" "Draw a delimiting rectangle on canvas.\n" "The purpose is to illustrate the limits for our work." msgstr "" #: appGUI/MainGUI.py:1429 msgid "" "Relative measurement.\n" "Reference is last click position" msgstr "" #: appGUI/MainGUI.py:1437 msgid "" "Absolute measurement.\n" "Reference is (X=0, Y= 0) position" msgstr "" #: appGUI/MainGUI.py:1444 msgid "TCL Shell" msgstr "" #: appGUI/MainGUI.py:1518 appGUI/MainGUI.py:1526 appGUI/MainGUI.py:2859 #: appGUI/MainGUI.py:2865 appMain.py:2977 appMain.py:10368 msgid "Plot Area" msgstr "" #: appGUI/MainGUI.py:1603 msgid "CNC-JOB" msgstr "" #: appGUI/MainGUI.py:1613 msgid "Engraving" msgstr "" #: appGUI/MainGUI.py:1623 msgid "Processing" msgstr "" #: appGUI/MainGUI.py:1633 msgid "Extra Plugins" msgstr "" #: appGUI/MainGUI.py:1644 msgid "UTILITIES" msgstr "" #: appGUI/MainGUI.py:1662 appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:216 msgid "Restore Defaults" msgstr "" #: appGUI/MainGUI.py:1666 msgid "" "Restore the entire set of default values\n" "to the initial values loaded after first launch." msgstr "" #: appGUI/MainGUI.py:1671 msgid "Open Pref Folder" msgstr "" #: appGUI/MainGUI.py:1675 msgid "Open the folder where FlatCAM save the preferences files." msgstr "" #: appGUI/MainGUI.py:1679 appGUI/MainGUI.py:2405 msgid "Clear GUI Settings" msgstr "" #: appGUI/MainGUI.py:1684 msgid "" "Clear the GUI settings for FlatCAM,\n" "such as: layout, gui state, style etc." msgstr "" #: appGUI/MainGUI.py:1700 msgid "Apply the current preferences without saving to a file." msgstr "" #: appGUI/MainGUI.py:1708 msgid "" "Save the current settings in the 'current_defaults' file\n" "which is the file storing the working default preferences." msgstr "" #: appGUI/MainGUI.py:1716 msgid "Will not save the changes and will close the preferences window." msgstr "" #: appGUI/MainGUI.py:1733 msgid "Toggle Visibility" msgstr "" #: appGUI/MainGUI.py:1760 msgid "Grids" msgstr "" #: appGUI/MainGUI.py:1838 msgid "Union" msgstr "" #: appGUI/MainGUI.py:1840 msgid "Intersection" msgstr "" #: appGUI/MainGUI.py:1842 msgid "Subtraction" msgstr "" #: appGUI/MainGUI.py:1857 msgid "Pad" msgstr "" #: appGUI/MainGUI.py:1859 msgid "Pad Array" msgstr "" #: appGUI/MainGUI.py:1863 msgid "Track" msgstr "" #: appGUI/MainGUI.py:1865 msgid "Region" msgstr "" #: appGUI/MainGUI.py:1888 msgid "Exc Editor" msgstr "" #: appGUI/MainGUI.py:1916 msgid "Move2Origin" msgstr "" #: appGUI/MainGUI.py:1945 msgid "Application units" msgstr "" #: appGUI/MainGUI.py:2046 msgid "Lock Toolbars" msgstr "" #: appGUI/MainGUI.py:2304 msgid "Detachable Tabs" msgstr "" #: appGUI/MainGUI.py:2388 msgid "FlatCAM Preferences Folder opened." msgstr "" #: appGUI/MainGUI.py:2406 msgid "Are you sure you want to delete the GUI Settings? \n" msgstr "" #: appGUI/MainGUI.py:2413 appGUI/preferences/PreferencesUIManager.py:1152 #: appGUI/preferences/PreferencesUIManager.py:1392 appMain.py:2755 appMain.py:4036 #: appMain.py:6841 appMain.py:10245 appMain.py:12043 appPlugins/ToolImage.py:172 #: appTranslation.py:120 appTranslation.py:225 msgid "Yes" msgstr "" #: appGUI/MainGUI.py:2414 appGUI/preferences/PreferencesUIManager.py:1393 appMain.py:2756 #: appMain.py:4037 appMain.py:6842 appMain.py:10246 appMain.py:12044 #: appPlugins/ToolImage.py:173 appTranslation.py:121 appTranslation.py:226 msgid "No" msgstr "" #: appGUI/MainGUI.py:2666 msgid "Copy Objects" msgstr "" #: appGUI/MainGUI.py:2740 msgid "Key Shortcut List" msgstr "" #: appGUI/MainGUI.py:3459 msgid "" "Please first select a geometry item to be cut\n" "then select the geometry item that will be cut\n" "out of the first item. In the end press ~X~ key or\n" "the toolbar button." msgstr "" #: appGUI/MainGUI.py:3465 appGUI/MainGUI.py:3652 appGUI/MainGUI.py:3702 #: appGUI/MainGUI.py:3726 msgid "Warning" msgstr "" #: appGUI/MainGUI.py:3648 msgid "" "Please select geometry items \n" "on which to perform Intersection Tool." msgstr "" #: appGUI/MainGUI.py:3698 msgid "" "Please select geometry items \n" "on which to perform Subtraction." msgstr "" #: appGUI/MainGUI.py:3722 msgid "" "Please select geometry items \n" "on which to perform union." msgstr "" #: appGUI/MainGUI.py:4250 appMain.py:5142 appPlugins/ToolIsolation.py:992 #: appPlugins/ToolNCC.py:1363 appPlugins/ToolPaint.py:651 appPlugins/ToolSolderPaste.py:364 #: appPlugins/ToolSolderPaste.py:1318 msgid "New Tool" msgstr "" #: appGUI/MainGUI.py:4251 appMain.py:5143 appPlugins/ToolIsolation.py:993 #: appPlugins/ToolNCC.py:1364 appPlugins/ToolPaint.py:652 appPlugins/ToolSolderPaste.py:365 msgid "Enter a Tool Diameter" msgstr "" #: appGUI/MainGUI.py:4263 appMain.py:5159 appPlugins/ToolIsolation.py:1014 #: appPlugins/ToolNCC.py:1385 appPlugins/ToolPaint.py:665 appPlugins/ToolSolderPaste.py:377 msgid "Adding Tool cancelled" msgstr "" #: appGUI/MainGUI.py:4543 appMain.py:4022 msgid "Application is saving the project. Please wait ..." msgstr "" #: appGUI/MainGUI.py:4579 msgid "Shortcut Key List" msgstr "" #: appGUI/MainGUI.py:4982 msgid "General Shortcut list" msgstr "" #: appGUI/MainGUI.py:4983 msgid "SHOW SHORTCUT LIST" msgstr "" #: appGUI/MainGUI.py:4984 msgid "1" msgstr "" #: appGUI/MainGUI.py:4984 msgid "Switch to Project Tab" msgstr "" #: appGUI/MainGUI.py:4985 msgid "2" msgstr "" #: appGUI/MainGUI.py:4985 msgid "Switch to Selected Tab" msgstr "" #: appGUI/MainGUI.py:4986 msgid "3" msgstr "" #: appGUI/MainGUI.py:4986 msgid "Switch to Tool Tab" msgstr "" #: appGUI/MainGUI.py:4987 msgid "New Gerber" msgstr "" #: appGUI/MainGUI.py:4988 msgid "Edit Object (if selected)" msgstr "" #: appGUI/MainGUI.py:4989 appMain.py:7238 msgid "Grid On/Off" msgstr "" #: appGUI/MainGUI.py:4990 msgid "Jump to Coordinates" msgstr "" #: appGUI/MainGUI.py:4991 msgid "New Excellon" msgstr "" #: appGUI/MainGUI.py:4992 msgid "Move Obj" msgstr "" #: appGUI/MainGUI.py:4993 msgid "New Geometry" msgstr "" #: appGUI/MainGUI.py:4995 msgid "Change Units" msgstr "" #: appGUI/MainGUI.py:4996 msgid "Open Properties Plugin" msgstr "" #: appGUI/MainGUI.py:4997 msgid "Rotate by 90 degree CW" msgstr "" #: appGUI/MainGUI.py:4998 msgid "Shell Toggle" msgstr "" #: appGUI/MainGUI.py:4999 msgid "Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)" msgstr "" #: appGUI/MainGUI.py:5001 msgid "Flip on X_axis" msgstr "" #: appGUI/MainGUI.py:5002 msgid "Flip on Y_axis" msgstr "" #: appGUI/MainGUI.py:5008 msgid "Copy Obj" msgstr "" #: appGUI/MainGUI.py:5009 msgid "Open Tools Database" msgstr "" #: appGUI/MainGUI.py:5010 msgid "Open Excellon File" msgstr "" #: appGUI/MainGUI.py:5011 msgid "Open Gerber File" msgstr "" #: appGUI/MainGUI.py:5012 appGUI/MainGUI.py:5277 msgid "Ctrl+M" msgstr "" #: appGUI/MainGUI.py:5016 msgid "Ctrl+Q" msgstr "" #: appGUI/MainGUI.py:5016 appPlugins/ToolPDF.py:26 msgid "PDF Import Tool" msgstr "" #: appGUI/MainGUI.py:5021 msgid "Toggle the axis" msgstr "" #: appGUI/MainGUI.py:5022 msgid "Shift+C" msgstr "" #: appGUI/MainGUI.py:5022 msgid "Copy Obj_Name" msgstr "" #: appGUI/MainGUI.py:5027 appGUI/MainGUI.py:5271 appGUI/MainGUI.py:5382 #: appGUI/MainGUI.py:5528 msgid "Shift+M" msgstr "" #: appGUI/MainGUI.py:5027 appGUI/MainGUI.py:5271 appGUI/MainGUI.py:5382 #: appGUI/MainGUI.py:5528 msgid "Distance Minimum Tool" msgstr "" #: appGUI/MainGUI.py:5028 msgid "Open Preferences Window" msgstr "" #: appGUI/MainGUI.py:5029 msgid "Shift+R" msgstr "" #: appGUI/MainGUI.py:5029 msgid "Rotate by 90 degree CCW" msgstr "" #: appGUI/MainGUI.py:5030 msgid "Run a Script" msgstr "" #: appGUI/MainGUI.py:5031 msgid "Toggle the workspace" msgstr "" #: appGUI/MainGUI.py:5037 msgid "Alt+B" msgstr "" #: appGUI/MainGUI.py:5038 msgid "Alt+C" msgstr "" #: appGUI/MainGUI.py:5039 msgid "Alt+D" msgstr "" #: appGUI/MainGUI.py:5039 msgid "2-Sided PCB" msgstr "" #: appGUI/MainGUI.py:5040 msgid "Alt+E" msgstr "" #: appGUI/MainGUI.py:5041 msgid "Alt+F" msgstr "" #: appGUI/MainGUI.py:5041 appPlugins/ToolFiducials.py:129 appPlugins/ToolFiducials.py:894 msgid "Fiducials" msgstr "" #: appGUI/MainGUI.py:5042 msgid "Alt+G" msgstr "" #: appGUI/MainGUI.py:5042 appPlugins/ToolInvertGerber.py:91 #: appPlugins/ToolInvertGerber.py:194 appPlugins/ToolInvertGerber.py:289 msgid "Invert Gerber" msgstr "" #: appGUI/MainGUI.py:5043 msgid "Alt+H" msgstr "" #: appGUI/MainGUI.py:5044 msgid "Alt+I" msgstr "" #: appGUI/MainGUI.py:5045 msgid "Alt+J" msgstr "" #: appGUI/MainGUI.py:5046 msgid "Alt+K" msgstr "" #: appGUI/MainGUI.py:5046 msgid "Solder Paste Dispensing" msgstr "" #: appGUI/MainGUI.py:5047 msgid "Alt+L" msgstr "" #: appGUI/MainGUI.py:5047 msgid "Film PCB" msgstr "" #: appGUI/MainGUI.py:5048 msgid "Alt+M" msgstr "" #: appGUI/MainGUI.py:5049 appPlugins/ToolNCC.py:2263 appPlugins/ToolNCC.py:2265 #: appPlugins/ToolNCC.py:2855 appPlugins/ToolNCC.py:2857 msgid "Non-Copper Clearing" msgstr "" #: appGUI/MainGUI.py:5050 msgid "Alt+O" msgstr "" #: appGUI/MainGUI.py:5050 appPlugins/ToolIsolation.py:3503 appPlugins/ToolNCC.py:4219 msgid "Optimal" msgstr "" #: appGUI/MainGUI.py:5051 msgid "Alt+P" msgstr "" #: appGUI/MainGUI.py:5051 msgid "Paint Area" msgstr "" #: appGUI/MainGUI.py:5052 msgid "Alt+Q" msgstr "" #: appGUI/MainGUI.py:5052 appPlugins/ToolQRCode.py:112 appPlugins/ToolQRCode.py:708 msgid "QRCode" msgstr "" #: appGUI/MainGUI.py:5053 msgid "Rules Check" msgstr "" #: appGUI/MainGUI.py:5054 msgid "View File Source" msgstr "" #: appGUI/MainGUI.py:5055 msgid "Alt+T" msgstr "" #: appGUI/MainGUI.py:5056 msgid "Alt+W" msgstr "" #: appGUI/MainGUI.py:5056 appPlugins/ToolSub.py:151 appPlugins/ToolSub.py:764 msgid "Subtract" msgstr "" #: appGUI/MainGUI.py:5057 appGUI/MainGUI.py:5275 msgid "Alt+X" msgstr "" #: appGUI/MainGUI.py:5057 msgid "Cutout PCB" msgstr "" #: appGUI/MainGUI.py:5058 msgid "Alt+Z" msgstr "" #: appGUI/MainGUI.py:5058 appPlugins/ToolPanelize.py:20 msgid "Panelize PCB" msgstr "" #: appGUI/MainGUI.py:5061 msgid "Enable Non-selected Objects" msgstr "" #: appGUI/MainGUI.py:5062 msgid "Disable Non-selected Objects" msgstr "" #: appGUI/MainGUI.py:5063 msgid "Toggle Full Screen" msgstr "" #: appGUI/MainGUI.py:5066 msgid "Ctrl+Alt+X" msgstr "" #: appGUI/MainGUI.py:5066 msgid "Abort current task (gracefully)" msgstr "" #: appGUI/MainGUI.py:5070 msgid "Ctrl+Shift+V" msgstr "" #: appGUI/MainGUI.py:5070 msgid "Paste Special. Will convert a Windows path style to the one required in Tcl Shell" msgstr "" #: appGUI/MainGUI.py:5074 msgid "Open Online Manual" msgstr "" #: appGUI/MainGUI.py:5075 msgid "F2" msgstr "" #: appGUI/MainGUI.py:5075 msgid "Rename Objects" msgstr "" #: appGUI/MainGUI.py:5076 msgid "Open Online Tutorials" msgstr "" #: appGUI/MainGUI.py:5077 msgid "Refresh Plots" msgstr "" #: appGUI/MainGUI.py:5078 appPlugins/ToolSolderPaste.py:1776 msgid "Delete Object" msgstr "" #: appGUI/MainGUI.py:5079 appGUI/MainGUI.py:5384 msgid "Alternate: Delete Tool" msgstr "" #: appGUI/MainGUI.py:5080 msgid "(left to Key_1)Toggle Notebook Area (Left Side)" msgstr "" #: appGUI/MainGUI.py:5081 appGUI/MainGUI.py:5280 appGUI/MainGUI.py:5386 #: appGUI/MainGUI.py:5527 msgid "Space" msgstr "" #: appGUI/MainGUI.py:5081 msgid "En(Dis)able Obj Plot" msgstr "" #: appGUI/MainGUI.py:5082 appGUI/MainGUI.py:5282 appGUI/MainGUI.py:5385 #: appGUI/MainGUI.py:5526 msgid "Esc" msgstr "" #: appGUI/MainGUI.py:5082 msgid "Deselects all objects" msgstr "" #: appGUI/MainGUI.py:5096 msgid "Editor Shortcut list" msgstr "" #: appGUI/MainGUI.py:5251 msgid "GEOMETRY EDITOR" msgstr "" #: appGUI/MainGUI.py:5252 msgid "Draw an Arc" msgstr "" #: appGUI/MainGUI.py:5253 appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:215 msgid "Buffer Tool" msgstr "" #: appGUI/MainGUI.py:5254 msgid "Copy Geo Item" msgstr "" #: appGUI/MainGUI.py:5255 msgid "Within Add Arc will toogle the ARC direction: CW or CCW" msgstr "" #: appGUI/MainGUI.py:5256 msgid "Polygon Intersection Tool" msgstr "" #: appGUI/MainGUI.py:5257 msgid "Geo Paint Tool" msgstr "" #: appGUI/MainGUI.py:5258 appGUI/MainGUI.py:5376 appGUI/MainGUI.py:5516 msgid "Jump to Location (x, y)" msgstr "" #: appGUI/MainGUI.py:5260 msgid "Move Geo Item" msgstr "" #: appGUI/MainGUI.py:5261 msgid "Within Add Arc will cycle through the ARC modes" msgstr "" #: appGUI/MainGUI.py:5262 msgid "Draw a Polygon" msgstr "" #: appGUI/MainGUI.py:5263 msgid "Draw a Circle" msgstr "" #: appGUI/MainGUI.py:5264 msgid "Draw a Path" msgstr "" #: appGUI/MainGUI.py:5265 msgid "Draw Rectangle" msgstr "" #: appGUI/MainGUI.py:5266 msgid "Polygon Subtraction Tool" msgstr "" #: appGUI/MainGUI.py:5267 msgid "Add Text Tool" msgstr "" #: appGUI/MainGUI.py:5268 msgid "Polygon Union Tool" msgstr "" #: appGUI/MainGUI.py:5269 msgid "Flip shape on X axis" msgstr "" #: appGUI/MainGUI.py:5270 msgid "Flip shape on Y axis" msgstr "" #: appGUI/MainGUI.py:5272 msgid "Skew shape on X axis" msgstr "" #: appGUI/MainGUI.py:5273 msgid "Skew shape on Y axis" msgstr "" #: appGUI/MainGUI.py:5274 msgid "Editor Transformation Tool" msgstr "" #: appGUI/MainGUI.py:5275 msgid "Offset shape on X axis" msgstr "" #: appGUI/MainGUI.py:5276 msgid "Alt+Y" msgstr "" #: appGUI/MainGUI.py:5276 msgid "Offset shape on Y axis" msgstr "" #: appGUI/MainGUI.py:5278 appGUI/MainGUI.py:5387 appGUI/MainGUI.py:5530 msgid "Save Object and Exit Editor" msgstr "" #: appGUI/MainGUI.py:5279 msgid "Polygon Cut Tool" msgstr "" #: appGUI/MainGUI.py:5280 msgid "Rotate Geometry" msgstr "" #: appGUI/MainGUI.py:5281 msgid "ENTER" msgstr "" #: appGUI/MainGUI.py:5281 msgid "Finish drawing for certain tools" msgstr "" #: appGUI/MainGUI.py:5282 appGUI/MainGUI.py:5385 appGUI/MainGUI.py:5526 msgid "Abort and return to Select" msgstr "" #: appGUI/MainGUI.py:5372 msgid "EXCELLON EDITOR" msgstr "" #: appGUI/MainGUI.py:5380 msgid "Add a new Tool" msgstr "" #: appGUI/MainGUI.py:5386 msgid "Toggle Slot direction" msgstr "" #: appGUI/MainGUI.py:5388 msgid "Ctrl+Space" msgstr "" #: appGUI/MainGUI.py:5388 appGUI/MainGUI.py:5527 msgid "Toggle array direction" msgstr "" #: appGUI/MainGUI.py:5510 msgid "GERBER EDITOR" msgstr "" #: appGUI/MainGUI.py:5520 msgid "Within Track & Region Tools will cycle in REVERSE the bend modes" msgstr "" #: appGUI/MainGUI.py:5523 msgid "Within Track & Region Tools will cycle FORWARD the bend modes" msgstr "" #: appGUI/MainGUI.py:5525 msgid "Alternate: Delete Apertures" msgstr "" #: appGUI/MainGUI.py:5529 msgid "Eraser Tool" msgstr "" #: appGUI/MainGUI.py:5531 appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:265 msgid "Mark Area Tool" msgstr "" #: appGUI/MainGUI.py:5532 msgid "Poligonize Tool" msgstr "" #: appGUI/MainGUI.py:5533 msgid "Transformation Tool" msgstr "" #: appGUI/ObjectUI.py:32 msgid "App Object" msgstr "" #: appGUI/ObjectUI.py:94 appGUI/ObjectUI.py:150 msgid "Geometrical transformations of the current object." msgstr "" #: appGUI/ObjectUI.py:116 msgid "" "Factor by which to multiply\n" "geometric features of this object.\n" "Expressions are allowed. E.g: 1/25.4" msgstr "" #: appGUI/ObjectUI.py:123 msgid "Perform scaling operation." msgstr "" #: appGUI/ObjectUI.py:133 msgid "" "Amount by which to move the object\n" "in the x and y axes in (x, y) format.\n" "Expressions are allowed. E.g: (1/3.2, 0.5*3)" msgstr "" #: appGUI/ObjectUI.py:140 msgid "Perform the offset operation." msgstr "" #: appGUI/ObjectUI.py:183 msgid "Gerber Object" msgstr "" #: appGUI/ObjectUI.py:185 appGUI/ObjectUI.py:604 appGUI/ObjectUI.py:941 #: appGUI/ObjectUI.py:1283 msgid "General Information" msgstr "" #: appGUI/ObjectUI.py:186 appGUI/ObjectUI.py:605 appGUI/ObjectUI.py:942 #: appGUI/ObjectUI.py:1284 msgid "General data about the object." msgstr "" #: appGUI/ObjectUI.py:200 appGUI/ObjectUI.py:620 appGUI/ObjectUI.py:956 #: appGUI/ObjectUI.py:1299 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:27 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:30 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:29 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:28 msgid "Plot Options" msgstr "" #: appGUI/ObjectUI.py:205 appGUI/ObjectUI.py:623 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:47 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:50 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137 #: appPlugins/ToolCopperThieving.py:1431 msgid "Solid" msgstr "" #: appGUI/ObjectUI.py:207 appGUI/preferences/gerber/GerberGenPrefGroupUI.py:52 msgid "Solid color polygons." msgstr "" #: appGUI/ObjectUI.py:212 appGUI/ObjectUI.py:629 appGUI/ObjectUI.py:962 msgid "Multi-Color" msgstr "" #: appGUI/ObjectUI.py:214 appGUI/ObjectUI.py:631 appGUI/ObjectUI.py:964 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:56 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:48 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:59 msgid "Draw polygons in different colors." msgstr "" #: appGUI/ObjectUI.py:229 appGUI/ObjectUI.py:710 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:40 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:39 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:43 msgid "Plot" msgstr "" #: appGUI/ObjectUI.py:230 appGUI/ObjectUI.py:712 appGUI/ObjectUI.py:1057 #: appGUI/ObjectUI.py:1479 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:38 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:41 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:45 appPlugins/ToolMilling.py:4010 msgid "Plot (show) this object." msgstr "" #: appGUI/ObjectUI.py:238 appGUI/ObjectUI.py:447 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:37 appPlugins/ToolFollow.py:763 msgid "" "Generate a 'Follow' geometry.\n" "This means that it will cut through\n" "the middle of the trace." msgstr "" #: appGUI/ObjectUI.py:247 appGUI/ObjectUI.py:654 appGUI/ObjectUI.py:984 #: appGUI/ObjectUI.py:1333 msgid "Start the Object Editor" msgstr "" #: appGUI/ObjectUI.py:258 appGUI/ObjectUI.py:665 appGUI/ObjectUI.py:995 #: appGUI/ObjectUI.py:1343 msgid "INFO" msgstr "" #: appGUI/ObjectUI.py:260 appGUI/ObjectUI.py:667 appGUI/ObjectUI.py:997 #: appGUI/ObjectUI.py:1345 msgid "Show the Object Attributes." msgstr "" #: appGUI/ObjectUI.py:288 appGUI/ObjectUI.py:695 appGUI/ObjectUI.py:1025 #: appGUI/ObjectUI.py:1445 msgid "Tools/apertures in the loaded object." msgstr "" #: appGUI/ObjectUI.py:309 appGUI/ObjectUI.py:705 #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:44 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:46 msgid "Toggle the display of the Tools Table." msgstr "" #: appGUI/ObjectUI.py:318 msgid "Mark All" msgstr "" #: appGUI/ObjectUI.py:320 msgid "" "When checked it will display all the apertures.\n" "When unchecked, it will delete all mark shapes\n" "that are drawn on canvas." msgstr "" #: appGUI/ObjectUI.py:350 appPlugins/ToolExtract.py:1120 appPlugins/ToolPunchGerber.py:2133 msgid "Mark the aperture instances on canvas." msgstr "" #: appGUI/ObjectUI.py:357 appPlugins/ToolIsolation.py:3995 msgid "Buffer Solid Geometry" msgstr "" #: appGUI/ObjectUI.py:359 appPlugins/ToolIsolation.py:3997 msgid "" "This button is shown only when the Gerber file\n" "is loaded without buffering.\n" "Clicking this will create the buffered geometry\n" "required for isolation." msgstr "" #: appGUI/ObjectUI.py:385 msgid "Isolation Routing" msgstr "" #: appGUI/ObjectUI.py:388 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:27 #: appPlugins/ToolIsolation.py:3373 msgid "" "Create a Geometry object with\n" "toolpaths to cut around polygons." msgstr "" #: appGUI/ObjectUI.py:403 msgid "" "Generate the geometry for\n" "the board cutout." msgstr "" #: appGUI/ObjectUI.py:418 appPlugins/ToolFilm.py:1249 msgid "Create a positive/negative film for UV exposure." msgstr "" #: appGUI/ObjectUI.py:432 appGUI/ObjectUI.py:1143 appPlugins/ToolNCC.py:4602 msgid "" "Create the Geometry Object\n" "for non-copper routing." msgstr "" #: appGUI/ObjectUI.py:460 appGUI/ObjectUI.py:823 appGUI/ObjectUI.py:1160 #: appPlugins/ToolEtchCompensation.py:334 msgid "Utilities" msgstr "" #: appGUI/ObjectUI.py:462 appGUI/ObjectUI.py:825 appGUI/ObjectUI.py:1162 msgid "Show the Utilities." msgstr "" #: appGUI/ObjectUI.py:485 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:28 msgid "Non-copper regions" msgstr "" #: appGUI/ObjectUI.py:487 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:30 msgid "" "Create polygons covering the\n" "areas without copper on the PCB.\n" "Equivalent to the inverse of this\n" "object. Can be used to remove all\n" "copper from a specified region." msgstr "" #: appGUI/ObjectUI.py:502 appGUI/ObjectUI.py:548 #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:46 #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:80 msgid "Boundary Margin" msgstr "" #: appGUI/ObjectUI.py:504 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:48 msgid "" "Specify the edge of the PCB\n" "by drawing a box around all\n" "objects with this minimum\n" "distance." msgstr "" #: appGUI/ObjectUI.py:521 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:211 appPlugins/ToolFilm.py:1541 msgid "Resulting geometry will have rounded corners." msgstr "" #: appGUI/ObjectUI.py:524 appGUI/ObjectUI.py:569 appPlugins/ToolCutOut.py:2676 #: appPlugins/ToolFollow.py:755 appPlugins/ToolIsolation.py:3974 appPlugins/ToolNCC.py:4599 #: appPlugins/ToolPaint.py:3348 appPlugins/ToolSolderPaste.py:1661 msgid "Generate Geometry" msgstr "" #: appGUI/ObjectUI.py:533 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:71 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:134 appPlugins/ToolPanelize.py:1229 #: appPlugins/ToolQRCode.py:895 msgid "Bounding Box" msgstr "" #: appGUI/ObjectUI.py:535 msgid "" "Create a geometry surrounding the Gerber object.\n" "Square shape." msgstr "" #: appGUI/ObjectUI.py:550 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:82 msgid "" "Distance of the edges of the box\n" "to the nearest polygon." msgstr "" #: appGUI/ObjectUI.py:563 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:95 msgid "" "If the bounding box is \n" "to have rounded corners\n" "their radius is equal to\n" "the margin." msgstr "" #: appGUI/ObjectUI.py:572 msgid "Generate the Geometry object." msgstr "" #: appGUI/ObjectUI.py:599 msgid "Excellon Object" msgstr "" #: appGUI/ObjectUI.py:625 msgid "Solid circles." msgstr "" #: appGUI/ObjectUI.py:745 appPlugins/ToolDrilling.py:2452 appPlugins/ToolMilling.py:4034 msgid "" "This is the Tool Number.\n" "When ToolChange is checked, on toolchange event this value\n" "will be showed as a T1, T2 ... Tn in the Machine Code.\n" "\n" "Here the tools are selected for G-code generation." msgstr "" #: appGUI/ObjectUI.py:750 appGUI/ObjectUI.py:1080 appPlugins/ToolDrilling.py:2457 #: appPlugins/ToolIsolation.py:3451 appPlugins/ToolMilling.py:4039 #: appPlugins/ToolMilling.py:4157 appPlugins/ToolNCC.py:4148 appPlugins/ToolPaint.py:3032 msgid "" "Tool Diameter. Its value\n" "is the cut width into the material." msgstr "" #: appGUI/ObjectUI.py:753 appPlugins/ToolDrilling.py:2460 appPlugins/ToolMilling.py:4042 msgid "" "The number of Drill holes. Holes that are drilled with\n" "a drill bit." msgstr "" #: appGUI/ObjectUI.py:756 appPlugins/ToolDrilling.py:2463 appPlugins/ToolMilling.py:4045 msgid "" "The number of Slot holes. Holes that are created by\n" "milling them with an endmill bit." msgstr "" #: appGUI/ObjectUI.py:759 msgid "Show the color of the drill holes when using multi-color." msgstr "" #: appGUI/ObjectUI.py:761 msgid "" "Toggle display of the drills for the current tool.\n" "This does not select the tools for G-code generation." msgstr "" #: appGUI/ObjectUI.py:770 appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:49 msgid "Auto load from DB" msgstr "" #: appGUI/ObjectUI.py:772 appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:51 msgid "" "Automatic replacement of the tools from related application tools\n" "with tools from DB that have a close diameter value." msgstr "" #: appGUI/ObjectUI.py:793 msgid "Generate GCode from the drill holes in an Excellon object." msgstr "" #: appGUI/ObjectUI.py:807 msgid "Generate a Geometry for milling drills or slots in an Excellon object." msgstr "" #: appGUI/ObjectUI.py:847 msgid "Milling Geometry" msgstr "" #: appGUI/ObjectUI.py:849 msgid "" "Create Geometry for milling holes.\n" "Select from the Tools Table above the hole dias to be\n" "milled. Use the # column to make the selection." msgstr "" #: appGUI/ObjectUI.py:861 appGUI/preferences/tools/ToolsMillPrefGroupUI.py:598 #: appPlugins/ToolMilling.py:4303 msgid "Milling Diameter" msgstr "" #: appGUI/ObjectUI.py:863 msgid "Diameter of the cutting tool." msgstr "" #: appGUI/ObjectUI.py:873 msgid "Mill Drills" msgstr "" #: appGUI/ObjectUI.py:875 msgid "" "Create the Geometry Object\n" "for milling drills." msgstr "" #: appGUI/ObjectUI.py:893 msgid "Mill Slots" msgstr "" #: appGUI/ObjectUI.py:895 msgid "" "Create the Geometry Object\n" "for milling slots." msgstr "" #: appGUI/ObjectUI.py:937 msgid "Geometry Object" msgstr "" #: appGUI/ObjectUI.py:1038 msgid "" "Tools in this Geometry object used for cutting.\n" "The 'Offset' entry will set an offset for the cut.\n" "'Offset' can be inside, outside, on path (none) and custom.\n" "'Type' entry is only informative and it allow to know the \n" "intent of using the current tool. \n" "It can be Rough(ing), Finish(ing) or Iso(lation).\n" "The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n" "ball(B), or V-Shaped(V). \n" "When V-shaped is selected the 'Type' entry is automatically \n" "set to Isolation, the CutZ parameter in the UI form is\n" "grayed out and Cut Z is automatically calculated from the newly \n" "showed UI form entries named V-Tip Dia and V-Tip Angle." msgstr "" #: appGUI/ObjectUI.py:1055 appGUI/ObjectUI.py:1477 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:37 appPlugins/ToolMilling.py:4009 msgid "Plot Object" msgstr "" #: appGUI/ObjectUI.py:1068 appGUI/ObjectUI.py:1490 appGUI/ObjectUI.py:1500 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:156 #: appPlugins/ToolCopperThieving.py:1456 appPlugins/ToolMilling.py:4146 msgid "Dia" msgstr "" #: appGUI/ObjectUI.py:1075 msgid "" "Tool Number.\n" "When ToolChange is checked, on toolchange event this value\n" "will be showed as a T1, T2 ... Tn" msgstr "" #: appGUI/ObjectUI.py:1084 msgid "Offset Type. The kind of cut offset to be used." msgstr "" #: appGUI/ObjectUI.py:1088 msgid "" "Job Type. Usually the UI form values \n" "are choose based on the operation type and this will serve as a reminder." msgstr "" #: appGUI/ObjectUI.py:1100 msgid "" "Plot column. It is visible only for MultiGeo Geometry objects.\n" "Enable plot for the selected tool geometry." msgstr "" #: appGUI/ObjectUI.py:1119 msgid "Generate a CNCJob by milling a Geometry." msgstr "" #: appGUI/ObjectUI.py:1133 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:30 msgid "" "Creates tool paths to cover the\n" "whole area of a polygon." msgstr "" #: appGUI/ObjectUI.py:1198 appObjects/AppObjectTemplate.py:745 msgid "Points" msgstr "" #: appGUI/ObjectUI.py:1200 msgid "Total of vertex points in the geometry." msgstr "" #: appGUI/ObjectUI.py:1208 appPlugins/ToolCalculators.py:654 #: appPlugins/ToolCalculators.py:1038 msgid "Calculate" msgstr "" #: appGUI/ObjectUI.py:1211 msgid "Calculate the number of vertex points in the geometry." msgstr "" #: appGUI/ObjectUI.py:1277 msgid "CNC Job Object" msgstr "" #: appGUI/ObjectUI.py:1302 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:52 msgid "" "This selects the kind of geometries on the canvas to plot.\n" "Those can be either of type 'Travel' which means the moves\n" "above the work piece or it can be of type 'Cut',\n" "which means the moves that cut into the material." msgstr "" #: appGUI/ObjectUI.py:1311 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:60 msgid "Travel" msgstr "" #: appGUI/ObjectUI.py:1390 appObjects/AppObjectTemplate.py:929 appPlugins/ToolReport.py:581 msgid "Travelled distance" msgstr "" #: appGUI/ObjectUI.py:1392 msgid "" "This is the total travelled distance on X-Y plane.\n" "In current units." msgstr "" #: appGUI/ObjectUI.py:1403 msgid "Estimated time" msgstr "" #: appGUI/ObjectUI.py:1405 msgid "" "This is the estimated time to do the routing/drilling,\n" "without the time spent in ToolChange events." msgstr "" #: appGUI/ObjectUI.py:1425 msgid "Use CNC Code Snippets" msgstr "" #: appGUI/ObjectUI.py:1427 msgid "" "When selected, it will include CNC Code snippets (append and prepend)\n" "defined in the Preferences." msgstr "" #: appGUI/ObjectUI.py:1433 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:68 msgid "Display Annotation" msgstr "" #: appGUI/ObjectUI.py:1435 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:70 msgid "" "This selects if to display text annotation on the plot.\n" "When checked it will display numbers in order for each end\n" "of a travel line." msgstr "" #: appGUI/ObjectUI.py:1459 msgid "CNC Tools Table" msgstr "" #: appGUI/ObjectUI.py:1462 msgid "" "Tools in this CNCJob object used for cutting.\n" "The tool diameter is used for plotting on canvas.\n" "The 'Offset' entry will set an offset for the cut.\n" "'Offset' can be inside, outside, on path (none) and custom.\n" "'Type' entry is only informative and it allow to know the \n" "intent of using the current tool. \n" "It can be Rough(ing), Finish(ing) or Iso(lation).\n" "The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n" "ball(B), or V-Shaped(V)." msgstr "" #: appGUI/ObjectUI.py:1511 msgid "Update Plot" msgstr "" #: appGUI/ObjectUI.py:1513 msgid "Update the plot." msgstr "" #: appGUI/ObjectUI.py:1527 appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:27 #: appPlugins/ToolLevelling.py:1744 msgid "Generate CNC Code with auto-levelled paths." msgstr "" #: appGUI/ObjectUI.py:1554 msgid "Opens dialog to save CNC Code file." msgstr "" #: appGUI/ObjectUI.py:1561 appPlugins/ToolSolderPaste.py:1747 msgid "Review CNC Code." msgstr "" #: appGUI/ObjectUI.py:1595 msgid "Script Object" msgstr "" #: appGUI/ObjectUI.py:1615 appGUI/ObjectUI.py:1689 msgid "Auto Completer" msgstr "" #: appGUI/ObjectUI.py:1617 msgid "This selects if the auto completer is enabled in the Script Editor." msgstr "" #: appGUI/ObjectUI.py:1662 msgid "Document Object" msgstr "" #: appGUI/ObjectUI.py:1691 msgid "This selects if the auto completer is enabled in the Document Editor." msgstr "" #: appGUI/ObjectUI.py:1709 msgid "Font Type" msgstr "" #: appGUI/ObjectUI.py:1727 appGUI/preferences/general/GeneralAPPSetGroupUI.py:194 msgid "Font Size" msgstr "" #: appGUI/ObjectUI.py:1763 msgid "Alignment" msgstr "" #: appGUI/ObjectUI.py:1768 msgid "Align Left" msgstr "" #: appGUI/ObjectUI.py:1778 msgid "Align Right" msgstr "" #: appGUI/ObjectUI.py:1783 msgid "Justify" msgstr "" #: appGUI/ObjectUI.py:1793 msgid "Font Color" msgstr "" #: appGUI/ObjectUI.py:1795 msgid "Set the font color for the selected text" msgstr "" #: appGUI/ObjectUI.py:1812 msgid "Selection Color" msgstr "" #: appGUI/ObjectUI.py:1814 msgid "Set the selection color when doing text selection." msgstr "" #: appGUI/ObjectUI.py:1831 msgid "Tab Size" msgstr "" #: appGUI/ObjectUI.py:1833 msgid "Set the tab size. In pixels. Default value is 80 pixels." msgstr "" #: appGUI/PlotCanvas.py:254 appGUI/PlotCanvasLegacy.py:409 msgid "Axis enabled." msgstr "" #: appGUI/PlotCanvas.py:262 appGUI/PlotCanvasLegacy.py:418 msgid "Axis disabled." msgstr "" #: appGUI/PlotCanvas.py:300 appGUI/PlotCanvasLegacy.py:439 msgid "HUD enabled." msgstr "" #: appGUI/PlotCanvas.py:309 appGUI/PlotCanvasLegacy.py:446 msgid "HUD disabled." msgstr "" #: appGUI/PlotCanvas.py:410 appGUI/PlotCanvasLegacy.py:548 msgid "Grid enabled." msgstr "" #: appGUI/PlotCanvas.py:417 appGUI/PlotCanvasLegacy.py:558 msgid "Grid disabled." msgstr "" #: appGUI/PlotCanvasLegacy.py:1661 msgid "" "Could not annotate due of a difference between the number of text elements and the number " "of text positions." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1118 msgid "Preferences applied." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1144 msgid "Application will restart" msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1145 msgid "Are you sure you want to continue?" msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1241 msgid "Preferences default values are restored." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1273 appMain.py:3137 appMain.py:10982 msgid "Failed to write defaults to file." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1277 #: appGUI/preferences/PreferencesUIManager.py:1401 msgid "Preferences saved." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1330 msgid "Preferences edited but not saved." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1384 msgid "" "One or more values are changed.\n" "Do you want to save?" msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1426 msgid "Preferences closed without saving." msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:21 #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:20 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:20 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:21 msgid "Adv. Options" msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:28 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:30 msgid "" "Export and save G-Code to\n" "make this object to a file." msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:40 msgid "Annotation Size" msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:42 msgid "The font size of the annotation text. In pixels." msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:51 msgid "Annotation Color" msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:53 msgid "Set the font color for the annotation texts." msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:30 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:29 msgid "A list of Editor parameters." msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:43 msgid "Prepend to G-Code" msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:45 msgid "" "Type here any G-Code commands you would\n" "like to add at the beginning of the G-Code file." msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:52 msgid "" "Type here any G-Code commands you would like to add at the beginning of the G-Code file." msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:59 msgid "Append to G-Code" msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:61 msgid "" "Type here any G-Code commands you would\n" "like to append to the generated file.\n" "I.e.: M2 (End of program)" msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:69 msgid "" "Type here any G-Code commands you would like to append to the generated file.\n" "I.e.: M2 (End of program)" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:44 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:61 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:53 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:64 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:43 msgid "Circle Steps" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:46 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:63 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:55 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:66 msgid "" "The number of circle steps for \n" "linear approximation of circles." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:57 msgid "Travel dia" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:59 msgid "" "The width of the travel lines to be\n" "rendered in the plot." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:74 msgid "G-code Decimals" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:85 msgid "" "The number of decimals to be used for \n" "the X, Y, Z coordinates in CNC code (GCODE, etc.)" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:96 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:155 appObjects/AppObjectTemplate.py:896 #: appPlugins/ToolLevelling.py:2205 appPlugins/ToolReport.py:548 #: appPlugins/ToolSolderPaste.py:1484 msgid "Feedrate" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:98 msgid "" "The number of decimals to be used for \n" "the Feedrate parameter in CNC code (GCODE, etc.)" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:109 msgid "Coordinates type" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:111 msgid "" "The type of coordinates to be used in Gcode.\n" "Can be:\n" "- Absolute G90 -> the reference is the origin x=0, y=0\n" "- Incremental G91 -> the reference is the previous position" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:117 msgid "Absolute" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:118 msgid "Incremental" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:128 msgid "Force Windows style line-ending" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:130 msgid "" "When checked will force a Windows style line-ending\n" "(\\r\\n) on non-Windows OS's." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:144 msgid "Travel Line Color" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:154 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:203 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:304 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:170 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:211 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:151 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:234 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:242 appPlugins/ToolRulesCheck.py:1371 #: appPlugins/ToolRulesCheck.py:1386 msgid "Outline" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:156 msgid "Set the travel line color for plotted objects." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:164 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:213 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:314 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:179 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:221 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:254 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:128 #: appPlugins/ToolCopperThieving.py:1422 msgid "Fill" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:166 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:215 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:316 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:256 msgid "" "Set the fill color for plotted objects.\n" "First 6 digits are the color and the last 2\n" "digits are for alpha (transparency) level." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:176 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:326 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:192 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:234 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:266 msgid "Alpha" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:178 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:328 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:268 msgid "Set the fill transparency for plotted objects." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:193 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:294 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:141 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:223 msgid "Object Color" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:205 msgid "Set the color for plotted objects." msgstr "" #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:28 msgid "Export G-Code" msgstr "" #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:50 msgid "Plot kind" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:20 msgid "Pre-Processors" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:25 msgid "Compensation" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:27 msgid "Compensate CNC bed issues." msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:38 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:50 msgid "Bed Size" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:40 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:52 msgid "CNC bed size on direction" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:62 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:74 msgid "Bed Offset" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:64 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:76 msgid "CNC bed offset on direction" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:86 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:98 msgid "Bed Skew" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:88 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:100 msgid "CNC bed skew on direction" msgstr "" #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:27 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:27 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:275 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:292 msgid "Advanced Options" msgstr "" #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:29 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:29 msgid "" "A list of advanced parameters.\n" "Those parameters are available only for\n" "Advanced App. Level." msgstr "" #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:42 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:44 msgid "Table Show/Hide" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:27 msgid "A list of Excellon Editor parameters." msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:38 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:40 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:42 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:169 msgid "Selection limit" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:40 msgid "" "Set the number of selected Excellon geometry\n" "items above which the utility geometry\n" "becomes just a selection rectangle.\n" "Increases the performance when moving a\n" "large number of geometric elements." msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:53 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:115 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:116 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:118 msgid "New Dia" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:66 msgid "Nr of drills" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:68 msgid "Specify how many drills to be in the array." msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:81 msgid "Linear Drill Array" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:91 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:261 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:132 msgid "Linear Direction" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:136 msgid "Circular Drill Array" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:146 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:318 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:186 msgid "Circular Direction" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:159 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:331 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:199 msgid "Circular Angle" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:238 msgid "Linear Slot Array" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:248 msgid "Nr of slots" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:308 msgid "Circular Slot Array" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:26 #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:26 msgid "Export Options" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:28 msgid "" "The parameters set here are used in the file exported\n" "when using the File -> Export -> Export Excellon menu entry." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:40 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:187 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:31 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:35 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:96 appPlugins/ToolPcbWizard.py:487 #: appPlugins/ToolReport.py:169 msgid "Units" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:42 #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:48 msgid "The units used in the Excellon file." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:45 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:197 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:40 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:101 appPlugins/ToolPcbWizard.py:485 #: appPlugins/ToolReport.py:355 appPlugins/ToolReport.py:359 appPlugins/ToolReport.py:361 msgid "Inch" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:55 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:50 msgid "Int/Decimals" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:57 msgid "" "The NC drill files, usually named Excellon files\n" "are files that can be found in different formats.\n" "Here we set the format used when the provided\n" "coordinates are not using period." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:69 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:119 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:148 msgid "" "This numbers signify the number of digits in\n" "the whole part of Excellon coordinates." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:82 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:132 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:161 msgid "" "This numbers signify the number of digits in\n" "the decimal part of Excellon coordinates." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:92 #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:40 msgid "Format" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:94 #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:104 msgid "" "Select the kind of coordinates format used.\n" "Coordinates can be saved with decimal point or without.\n" "When there is no decimal point, it is required to specify\n" "the number of digits for integer part and the number of decimals.\n" "Also it will have to be specified if LZ = leading zeros are kept\n" "or TZ = trailing zeros are kept." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:101 msgid "Decimal" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:102 msgid "No-Decimal" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:116 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:169 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:91 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:111 msgid "Zeros" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:119 msgid "" "This sets the type of Excellon zeros.\n" "If LZ then Leading Zeros are kept and\n" "Trailing Zeros are removed.\n" "If TZ is checked then Trailing Zeros are kept\n" "and Leading Zeros are removed." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:126 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:182 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:101 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:121 appPlugins/ToolPcbWizard.py:470 msgid "LZ" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:127 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:183 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:102 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:122 appPlugins/ToolPcbWizard.py:471 msgid "TZ" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:129 msgid "" "This sets the default type of Excellon zeros.\n" "If LZ then Leading Zeros are kept and\n" "Trailing Zeros are removed.\n" "If TZ is checked then Trailing Zeros are kept\n" "and Leading Zeros are removed." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:140 msgid "Slot type" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:143 #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:153 msgid "" "This sets how the slots will be exported.\n" "If ROUTED then the slots will be routed\n" "using M15/M16 commands.\n" "If DRILLED(G85) the slots will be exported\n" "using the Drilled slot command (G85)." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:150 msgid "Routed" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:151 msgid "Drilled(G85)" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:54 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:46 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:57 msgid "M-Color" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:80 appPlugins/ToolPcbWizard.py:443 msgid "Excellon Format" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:82 msgid "" "The NC drill files, usually named Excellon files\n" "are files that can be found in different formats.\n" "Here we set the format used when the provided\n" "coordinates are not using period.\n" "\n" "Possible presets:\n" "\n" "PROTEUS 3:3 MM LZ\n" "DipTrace 5:2 MM TZ\n" "DipTrace 4:3 MM LZ\n" "\n" "EAGLE 3:3 MM TZ\n" "EAGLE 4:3 MM TZ\n" "EAGLE 2:5 INCH TZ\n" "EAGLE 3:5 INCH TZ\n" "\n" "ALTIUM 2:4 INCH LZ\n" "Sprint Layout 2:4 INCH LZ\n" "KiCAD 3:5 INCH TZ" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:111 msgid "INCH" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:112 msgid "Default values for INCH are 2:4" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:140 msgid "METRIC" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:141 msgid "Default values for METRIC are 3:3" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:172 msgid "" "This sets the type of Excellon zeros.\n" "If LZ then Leading Zeros are kept and\n" "Trailing Zeros are removed.\n" "If TZ is checked then Trailing Zeros are kept\n" "and Leading Zeros are removed.\n" "\n" "This is used when there is no information\n" "stored in the Excellon file." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:190 msgid "" "This sets the default units of Excellon files.\n" "If it is not detected in the parsed file the value here\n" "will be used.Some Excellon files don't have an header\n" "therefore this parameter will be used." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:200 msgid "" "This sets the units of Excellon files.\n" "Some Excellon files don't have an header\n" "therefore this parameter will be used." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:208 msgid "Update Export settings" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:223 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:72 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:107 appPlugins/ToolPanelize.py:1357 msgid "Path Optimization" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:232 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:81 msgid "Algorithm:" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:234 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:83 msgid "" "This sets the path optimization algorithm.\n" "- Rtre -> Rtree algorithm\n" "- MetaHeuristic -> Google OR-Tools algorithm with\n" "MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n" "- Basic -> Using Google OR-Tools Basic algorithm\n" "- TSA -> Using Travelling Salesman algorithm\n" "\n" "Some options are disabled when the application works in 32bit mode." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:246 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:95 msgid "Rtree" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:247 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:341 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:345 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:352 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:96 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:166 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:170 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:177 msgid "MetaHeuristic" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:248 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:341 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:345 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:352 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:97 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:166 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:170 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:177 msgid "Basic" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:249 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:98 msgid "TSA" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:255 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:104 msgid "Duration" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:258 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:106 msgid "" "When OR-Tools Metaheuristic (MH) is enabled there is a\n" "maximum threshold for how much time is spent doing the\n" "path optimization. This max duration is set here.\n" "In seconds." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:275 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:122 msgid "Join Option" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:284 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:131 msgid "Fuse Tools" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:286 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:133 msgid "" "When checked, the tools will be merged\n" "but only if they share some of their attributes." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:306 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:153 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:244 msgid "Set the line color for plotted objects." msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:29 msgid "" "Parameters used to create a CNC Job object\n" "for this drill object." msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:41 msgid "Mill Holes" msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:43 msgid "Create Geometry for milling holes." msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:47 msgid "Drill Tool dia" msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:49 msgid "" "Diameter of the cutting tool\n" "when milling drill holes." msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:59 msgid "Slot Tool dia" msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:61 msgid "" "Diameter of the cutting tool\n" "when milling slot holes." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:21 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:71 msgid "App Settings" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:40 msgid "Grid Settings" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:51 appMain.py:8653 msgid "X value" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:53 msgid "This is the Grid snap value on X axis." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:63 appMain.py:8656 msgid "Y value" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:65 msgid "This is the Grid snap value on Y axis." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:75 msgid "Snap Max" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:93 msgid "Workspace Settings" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:102 msgid "Active" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:112 msgid "" "Select the type of rectangle to be used on canvas,\n" "as valid workspace." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:178 msgid "Orientation" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:179 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:291 appPlugins/ToolFilm.py:1685 msgid "" "Can be:\n" "- Portrait\n" "- Landscape" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:183 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:165 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:295 appMain.py:8673 #: appPlugins/ToolFilm.py:1689 msgid "Portrait" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:184 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:166 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:296 appMain.py:8675 #: appPlugins/ToolFilm.py:1690 msgid "Landscape" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:204 msgid "Notebook" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:206 msgid "" "This sets the font size for the elements found in the Notebook.\n" "The notebook is the collapsible area in the left side of the GUI,\n" "and include the Project, Selected and Tool tabs." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:225 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:286 appMain.py:8661 #: appPlugins/ToolDblSided.py:868 appPlugins/ToolFilm.py:1500 msgid "Axis" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:227 msgid "This sets the font size for canvas axis." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:244 msgid "Textbox" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:246 msgid "" "This sets the font size for the Textbox GUI\n" "elements that are used in the application." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:264 appMain.py:8678 msgid "HUD" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:266 msgid "This sets the font size for the Heads Up Display." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:296 msgid "Axis Color" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:298 msgid "Set the color of the screen axis." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:308 msgid "Mouse Settings" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:318 msgid "Cursor Shape" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:320 msgid "" "Choose a mouse cursor shape.\n" "- Small -> with a customizable size.\n" "- Big -> Infinite lines" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:326 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:204 msgid "Small" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:327 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:205 msgid "Big" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:334 msgid "Cursor Size" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:336 msgid "Set the size of the mouse cursor, in pixels." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:347 msgid "Cursor Width" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:349 msgid "Set the line width of the mouse cursor, in pixels." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:360 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:367 msgid "Cursor Color" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:362 msgid "Check this box to color mouse cursor." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:369 msgid "Set the color of the mouse cursor." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:385 msgid "Pan Button" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:387 msgid "" "Select the mouse button to use for panning:\n" "- MMB --> Middle Mouse Button\n" "- RMB --> Right Mouse Button" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:391 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:237 msgid "MMB" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:392 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:238 msgid "RMB" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:398 msgid "Multi-Selection" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:400 msgid "Select the key used for multiple selection." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:402 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:244 msgid "CTRL" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:403 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:245 msgid "SHIFT" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:421 msgid "Delete object confirmation" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:423 msgid "" "When checked the application will ask for user confirmation\n" "whenever the Delete object(s) event is triggered, either by\n" "menu shortcut or key shortcut." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:429 msgid "Allow Edit" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:431 msgid "" "When checked, the user can edit the object names in the Project Tab\n" "by clicking on the object name. Active after restart." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:437 msgid "\"Open\" behavior" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:439 msgid "" "When checked the path for the last saved file is used when saving files,\n" "and the path for the last opened file is used when opening files.\n" "\n" "When unchecked the path for opening files is the one used last: either the\n" "path for saving files or the path for opening files." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:448 msgid "Enable ToolTips" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:450 msgid "" "Check this box if you want to have toolTips displayed\n" "when hovering with mouse over items throughout the App." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:459 msgid "Bookmarks limit" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:461 msgid "" "The maximum number of bookmarks that may be installed in the menu.\n" "The number of bookmarks in the bookmark manager may be greater\n" "but the menu will hold only so much." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:470 msgid "Activity Icon" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:472 msgid "Select the GIF that show activity when FlatCAM is active." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:24 msgid "App Preferences" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:32 msgid "" "The default value for the application units.\n" "Whatever is selected here is set every time\n" "the application is started." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:45 appPlugins/ToolCalculators.py:544 msgid "inch" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:52 msgid "Precision MM" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:54 msgid "" "The number of decimals used throughout the application\n" "when the set units are in METRIC system.\n" "Any change here require an application restart." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:66 msgid "Precision Inch" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:68 msgid "" "The number of decimals used throughout the application\n" "when the set units are in INCH system.\n" "Any change here require an application restart." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:92 msgid "Graphic Engine" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:93 msgid "" "Choose what graphic engine to use in FlatCAM.\n" "Legacy(2D) -> reduced functionality, slow performance but enhanced compatibility.\n" "OpenGL(3D) -> full functionality, high performance\n" "Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n" "Intel HD3000 or older. In this case the plot area will be black therefore\n" "use the Legacy(2D) mode." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:100 msgid "3D" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:111 msgid "Workers number" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:113 msgid "" "The number of Qthreads made available to the App.\n" "A bigger number may finish the jobs more quickly but\n" "depending on your computer speed, may make the App\n" "unresponsive. Can have a value between 2 and 16.\n" "Default value is 2.\n" "After change, it will be applied at next App start." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:127 msgid "Geo Tolerance" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:129 msgid "" "This value can counter the effect of the Circle Steps\n" "parameter. Default value is 0.005.\n" "A lower value will increase the detail both in image\n" "and in Gcode for the circles, with a higher cost in\n" "performance. Higher value will provide more\n" "performance at the expense of level of detail." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:144 msgid "Portable app" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:145 msgid "" "Choose if the application should run as portable.\n" "\n" "If Checked the application will run portable,\n" "which means that the preferences files will be saved\n" "in the application folder, in the lib\\config subfolder." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:153 msgid "Verbose log" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:154 msgid "" "Set the log level.\n" "Values:\n" "0 -> logging is disabled\n" "1 -> logging is done only in console\n" "2 -> verbose logging with messages in the Tcl Shell\n" "Require restart." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:169 msgid "Application Level" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:170 msgid "" "Choose the default level of usage for FlatCAM.\n" "BASIC level -> reduced functionality, best for beginner's.\n" "ADVANCED level -> full functionality.\n" "\n" "The choice here will influence the parameters in\n" "the Selected Tab for all kinds of FlatCAM objects." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:192 msgid "Languages" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:193 msgid "Set the language used throughout FlatCAM." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:206 appTranslation.py:114 msgid "Apply Language" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:207 msgid "" "Set the language used throughout FlatCAM.\n" "The app will restart after click." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:216 msgid "Startup Settings" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:229 msgid "Splash Screen" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:231 msgid "Enable display of the splash screen at application startup." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:243 msgid "Sys Tray Icon" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:245 msgid "Enable display of FlatCAM icon in Sys Tray." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:250 msgid "Show Shell" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:252 msgid "" "Check this box if you want the shell to\n" "start automatically at startup." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:259 msgid "Show Project" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:261 msgid "" "Check this box if you want the project/selected/tool tab area to\n" "to be shown automatically at startup." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:267 msgid "Version Check" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:269 msgid "" "Check this box if you want to check\n" "for a new version automatically at startup." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:276 msgid "Send Statistics" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:278 msgid "" "Check this box if you agree to send anonymous\n" "stats automatically at startup, to help improve FlatCAM." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:287 msgid "Save Settings" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:300 msgid "Save Compressed Project" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:302 msgid "" "Whether to save a compressed or uncompressed project.\n" "When checked it will save a compressed FlatCAM project." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:311 msgid "Compression" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:313 msgid "" "The level of compression used when saving\n" "a FlatCAM project. Higher value means better compression\n" "but require more RAM usage and more processing time." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:324 msgid "Enable Auto Save" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:326 msgid "" "Check to enable the autosave feature.\n" "When enabled, the application will try to save a project\n" "at the set interval." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:336 msgid "Interval" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:338 msgid "" "Time interval for autosaving. In milliseconds.\n" "The application will try to save periodically but only\n" "if the project was saved manually at least once.\n" "While active, some operations may block this feature." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:349 msgid "Text to PDF parameters" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:351 msgid "Used when saving text in Code Editor or in FlatCAM Document objects." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:369 msgid "Top Margin" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:371 msgid "Distance between text body and the top of the PDF file." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:382 msgid "Bottom Margin" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:384 msgid "Distance between text body and the bottom of the PDF file." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:395 msgid "Left Margin" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:397 msgid "Distance between text body and the left of the PDF file." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:408 msgid "Right Margin" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:410 msgid "Distance between text body and the right of the PDF file." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:21 msgid "GUI Preferences" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:38 msgid "Theme" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:40 msgid "" "Select a theme for the application.\n" "It will theme the plot area." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:46 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:132 #: appPlugins/ToolFiducials.py:1161 appPlugins/ToolMarkers.py:1457 msgid "Auto" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:47 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:284 msgid "Light" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:48 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:316 msgid "Dark" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:51 msgid "" "The theme can be:\n" "Default: Default theme\n" "Auto: Matches mode from OS\n" "Light: Light mode\n" "Dark: Dark mode" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:59 msgid "Dark Canvas" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:61 msgid "" "Check this box to force the use of dark canvas\n" "even if a dark theme is not selected." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:83 msgid "Layout" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:85 msgid "" "Select a layout for the application.\n" "It is applied immediately." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:105 msgid "Style" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:107 msgid "" "Select a style for the application.\n" "It will be applied at the next app start." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:122 msgid "Hover Shape" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:124 msgid "" "Enable display of a hover shape for the application objects.\n" "It is displayed whenever the mouse cursor is hovering\n" "over any kind of not-selected object." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:131 msgid "Selection Shape" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:133 msgid "" "Enable the display of a selection shape for the application objects.\n" "It is displayed whenever the mouse selects an object\n" "either by clicking or dragging mouse from left to right or\n" "right to left." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:141 msgid "GUI Layout" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:143 msgid "" "Select a GUI layout for the Preferences.\n" "Can be:\n" "'Normal' -> a normal and compact layout.\n" "'Columnar' -> a layout the auto-adjust such\n" "that columns are preferentially showed in columns" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:150 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:364 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:338 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:302 msgid "Normal" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:150 msgid "Columnar" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:157 appPlugins/ToolImage.py:809 #: appPlugins/ToolImage.py:820 msgid "Colors" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:167 msgid "Left-Right Selection Color" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:172 msgid "Set the line color for the 'left to right' selection box." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:181 msgid "" "Set the fill color for the selection box\n" "in case that the selection is done from left to right.\n" "First 6 digits are the color and the last 2\n" "digits are for alpha (transparency) level." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:194 msgid "Set the fill transparency for the 'left to right' selection box." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:207 msgid "Right-Left Selection Color" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:213 msgid "Set the line color for the 'right to left' selection box." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:223 msgid "" "Set the fill color for the selection box\n" "in case that the selection is done from right to left.\n" "First 6 digits are the color and the last 2\n" "digits are for alpha (transparency) level." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:236 msgid "Set the fill transparency for selection 'right to left' box." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:252 msgid "Editor Color" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:256 msgid "Drawing" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:258 msgid "Set the color for the shape." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:268 msgid "Set the color of the shape when selected." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:288 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:320 msgid "Enabled" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:290 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:322 msgid "Set the color of the items in Project Tab Tree." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:290 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:302 msgid "Light Theme." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:297 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:329 msgid "Disabled" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:300 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:332 msgid "" "Set the color of the items in Project Tab Tree,\n" "for the case when the items are disabled." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:322 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:334 msgid "Dark Theme." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:345 msgid "Project AutoHide" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:347 msgid "" "Check this box if you want the project/selected/tool tab area to\n" "hide automatically when there are no objects loaded and\n" "to show whenever a new object is created." msgstr "" #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:42 #: appPlugins/ToolMilling.py:4908 msgid "Segment X size" msgstr "" #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:44 #: appPlugins/ToolMilling.py:4910 msgid "" "The size of the trace segment on the X axis.\n" "Useful for auto-leveling.\n" "A value of 0 means no segmentation on the X axis." msgstr "" #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:58 #: appPlugins/ToolMilling.py:4925 msgid "Segment Y size" msgstr "" #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:60 #: appPlugins/ToolMilling.py:4927 msgid "" "The size of the trace segment on the Y axis.\n" "Useful for auto-leveling.\n" "A value of 0 means no segmentation on the Y axis." msgstr "" #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:42 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:171 msgid "" "Set the number of selected geometry\n" "items above which the utility geometry\n" "becomes just a selection rectangle.\n" "Increases the performance when moving a\n" "large number of geometric elements." msgstr "" #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:28 msgid "" "The parameters set here are used in the file exported\n" "when using the File -> Export -> Export DXF menu entry." msgstr "" #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:42 msgid "Autodesk DXF Format used when exporting Geometry as DXF." msgstr "" #: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:40 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:70 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:86 appPlugins/ToolCutOut.py:2401 #: appPlugins/ToolIsolation.py:3656 appPlugins/ToolMilling.py:1959 #: appPlugins/ToolMilling.py:4552 msgid "" "Cutting depth (negative)\n" "below the copper surface." msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:35 msgid "\"Follow\"" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:58 msgid "" "Buffering type:\n" "- None --> best performance, fast file loading but no so good display\n" "- Full --> slow file loading but good visuals. This is the default.\n" "<>: Don't change this unless you know what you are doing !!!" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:63 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:72 #: appObjects/AppObjectTemplate.py:818 appObjects/AppObjectTemplate.py:821 #: appObjects/AppObjectTemplate.py:824 appObjects/AppObjectTemplate.py:854 #: appObjects/AppObjectTemplate.py:861 appObjects/AppObjectTemplate.py:864 #: appPlugins/ToolCopperThieving.py:1744 appPlugins/ToolFiducials.py:1096 #: appPlugins/ToolReport.py:470 appPlugins/ToolReport.py:473 appPlugins/ToolReport.py:476 #: appPlugins/ToolReport.py:506 appPlugins/ToolReport.py:513 appPlugins/ToolReport.py:516 msgid "None" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:69 msgid "Delayed Buffering" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:71 msgid "When checked it will do the buffering in background." msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:78 msgid "" "When checked all the Gerber polygons will be\n" "loaded with simplification having a set tolerance.\n" "<>: Don't change this unless you know what you are doing !!!" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:86 msgid "Tolerance for polygon simplification." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:31 msgid "A list of Gerber Editor parameters." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:44 msgid "" "Set the number of selected Gerber geometry\n" "items above which the utility geometry\n" "becomes just a selection rectangle.\n" "Increases the performance when moving a\n" "large number of geometric elements." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:57 msgid "New Aperture code" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:70 msgid "New Aperture size" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:72 msgid "Size for the new aperture" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:83 msgid "New Aperture type" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:85 msgid "" "Type for the new aperture.\n" "Can be 'C', 'R' or 'O'." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:107 msgid "Aperture Dimensions" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:109 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:44 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:43 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:45 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:47 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:44 msgid "" "Diameters of the tools, separated by comma.\n" "The value of the diameter has to use the dot decimals separator.\n" "Valid values: 0.3, 1.0" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:121 msgid "Linear Pad Array" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:175 msgid "Circular Pad Array" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:228 msgid "Distance at which to buffer the Gerber element." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:240 msgid "Scale Tool" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:253 msgid "Factor to scale the Gerber element." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:276 msgid "Threshold low" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:278 msgid "Threshold value under which the apertures are not marked." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:288 msgid "Threshold high" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:290 msgid "Threshold value over which the apertures are not marked." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:37 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:43 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:98 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:104 msgid "The units used in the Gerber file." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:52 msgid "" "The number of digits in the whole part of the number\n" "and in the fractional part of the number." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:65 msgid "" "This numbers signify the number of digits in\n" "the whole part of Gerber coordinates." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:81 msgid "" "This numbers signify the number of digits in\n" "the decimal part of Gerber coordinates." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:94 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:104 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:114 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:124 msgid "" "This sets the type of Gerber zeros.\n" "If LZ then Leading Zeros are removed and\n" "Trailing Zeros are kept.\n" "If TZ is checked then Trailing Zeros are removed\n" "and Leading Zeros are kept." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:80 msgid "Default Values" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:82 msgid "" "Those values will be used as fallback values\n" "in case that they are not found in the Gerber file." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:148 msgid "Clean Apertures" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:150 msgid "" "Will remove apertures that do not have geometry\n" "thus lowering the number of apertures in the Gerber object." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:156 msgid "Polarity change buffer" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:158 msgid "" "Will apply extra buffering for the\n" "solid geometry when we have polarity changes.\n" "May help loading Gerber files that otherwise\n" "do not load correctly." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:166 msgid "Plot on Select" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:168 msgid "When active, selecting an object in the Project tab will replot it above the others." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:176 msgid "Layers" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:187 msgid "Store colors" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:189 msgid "" "It will store the set colors for Gerber objects.\n" "Those will be used each time the application is started." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:196 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:354 msgid "Color manager" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:199 msgid "Manage colors associated with Gerber objects." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:208 msgid "Reset the colors associated with Gerber objects." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:236 msgid "" "If checked, the polygon outline will be plotted on canvas.\n" "Plotting the outline require more processing power but looks nicer." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:329 msgid "Stored colors for Gerber objects are deleted." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:376 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:380 msgid "Color" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:391 msgid "Add a new layer." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:399 msgid "Delete the last layers." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:446 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:507 appMain.py:9195 appMain.py:9244 #: appMain.py:9253 appObjects/AppObject.py:323 msgid "Layer" msgstr "" #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:62 #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:93 msgid "Rounded Geo" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:21 msgid "Copper Thieving Plugin" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:30 msgid "" "A tool to generate a Copper Thieving that can be added\n" "to a selected Gerber file." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:45 msgid "Number of steps (lines) used to interpolate circles." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:55 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:326 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:268 #: appPlugins/ToolCopperThieving.py:1310 appPlugins/ToolCopperThieving.py:1697 #: appPlugins/ToolExtract.py:1352 msgid "Clearance" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:57 msgid "" "This set the distance between the copper Thieving components\n" "(the polygon fill may be split in multiple polygons)\n" "and the copper traces in the Gerber file." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:85 #: appPlugins/ToolCopperThieving.py:1341 msgid "Thieving areas with area less then this value will not be added." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:97 #: appPlugins/ToolCopperThieving.py:1362 msgid "Reference:" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:99 #: appPlugins/ToolCopperThieving.py:1364 msgid "" "- 'Itself' - the copper thieving extent is based on the object extent.\n" "- 'Area Selection' - left mouse click to start selection of the area to be filled.\n" "- 'Reference Object' - will do copper thieving within the area specified by another " "object." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:308 appPlugins/ToolCopperThieving.py:1369 #: appPlugins/ToolNCC.py:4532 msgid "Itself" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:323 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:308 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279 #: appPlugins/ToolCopperThieving.py:1369 appPlugins/ToolFollow.py:735 #: appPlugins/ToolIsolation.py:3894 appPlugins/ToolNCC.py:4532 appPlugins/ToolPaint.py:3297 msgid "Area Selection" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:323 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:308 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279 #: appPlugins/ToolCopperThieving.py:1369 appPlugins/ToolIsolation.py:3894 #: appPlugins/ToolNCC.py:4532 appPlugins/ToolPaint.py:3297 msgid "Reference Object" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:111 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:67 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:201 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:67 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:198 #: appPlugins/ToolCopperThieving.py:1407 appPlugins/ToolCutOut.py:407 #: appPlugins/ToolExtract.py:1087 appPlugins/ToolExtract.py:1237 #: appPlugins/ToolPunchGerber.py:2100 appPlugins/ToolPunchGerber.py:2271 msgid "Rectangular" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:112 #: appPlugins/ToolCopperThieving.py:1408 msgid "Minimal" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:114 #: appPlugins/ToolCopperThieving.py:1401 appPlugins/ToolFilm.py:1309 #: appPlugins/ToolPanelize.py:1241 msgid "Box Type" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:116 #: appPlugins/ToolCopperThieving.py:1403 msgid "" "- 'Rectangular' - the bounding box will be of rectangular shape.\n" "- 'Minimal' - the bounding box will be the convex hull shape." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:130 #: appPlugins/ToolCopperThieving.py:1424 msgid "" "- 'Solid' - copper thieving will be a solid polygon.\n" "- 'Dots Grid' - the empty area will be filled with a pattern of dots.\n" "- 'Squares Grid' - the empty area will be filled with a pattern of squares.\n" "- 'Lines Grid' - the empty area will be filled with a pattern of lines." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137 #: appPlugins/ToolCopperThieving.py:1431 msgid "Dots Grid" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137 #: appPlugins/ToolCopperThieving.py:1431 msgid "Squares Grid" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137 #: appPlugins/ToolCopperThieving.py:1431 msgid "Lines Grid" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:145 #: appPlugins/ToolCopperThieving.py:1452 msgid "Dots Grid Parameters" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:158 #: appPlugins/ToolCopperThieving.py:1458 msgid "Dot diameter in Dots Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:171 #: appPlugins/ToolCopperThieving.py:1471 msgid "Distance between each two dots in Dots Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:184 #: appPlugins/ToolCopperThieving.py:1498 msgid "Squares Grid Parameters" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:197 #: appPlugins/ToolCopperThieving.py:1504 msgid "Square side size in Squares Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:210 #: appPlugins/ToolCopperThieving.py:1517 msgid "Distance between each two squares in Squares Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:223 #: appPlugins/ToolCopperThieving.py:1544 msgid "Lines Grid Parameters" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:236 #: appPlugins/ToolCopperThieving.py:1550 msgid "Line thickness size in Lines Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:249 #: appPlugins/ToolCopperThieving.py:1563 msgid "Distance between each two lines in Lines Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:262 #: appPlugins/ToolCopperThieving.py:1593 msgid "Robber Bar Parameters" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:264 #: appPlugins/ToolCopperThieving.py:1595 msgid "" "Parameters used for the robber bar.\n" "Robber bar = copper border to help in pattern hole plating." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:279 #: appPlugins/ToolCopperThieving.py:1615 msgid "Bounding box margin for robber bar." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:290 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:311 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:54 #: appPlugins/ToolCopperThieving.py:1626 appPlugins/ToolExtract.py:1412 #: appPlugins/ToolMarkers.py:1308 msgid "Thickness" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:292 #: appPlugins/ToolCopperThieving.py:1628 msgid "The robber bar thickness." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:305 #: appPlugins/ToolCopperThieving.py:1660 msgid "Pattern Plating Mask" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:307 #: appPlugins/ToolCopperThieving.py:1662 msgid "Generate a mask for pattern plating." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:319 #: appPlugins/ToolCopperThieving.py:1690 msgid "Only Pads" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:321 #: appPlugins/ToolCopperThieving.py:1692 msgid "Select only pads in case the selected object is a copper Gerber." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:328 #: appPlugins/ToolCopperThieving.py:1699 msgid "" "The distance between the possible copper thieving elements\n" "and/or robber bar and the actual openings in the mask." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:342 #: appPlugins/ToolCopperThieving.py:1735 msgid "Choose which additional geometry to include, if available." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:168 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:589 #: appPlugins/ToolCopperThieving.py:1744 appPlugins/ToolFilm.py:1498 #: appPlugins/ToolMilling.py:4294 msgid "Both" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345 #: appPlugins/ToolCopperThieving.py:532 appPlugins/ToolCopperThieving.py:536 #: appPlugins/ToolCopperThieving.py:598 appPlugins/ToolCopperThieving.py:1299 #: appPlugins/ToolCopperThieving.py:1744 msgid "Thieving" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345 #: appPlugins/ToolCopperThieving.py:1744 msgid "Robber bar" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:20 msgid "Extract Drills Options" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:27 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:27 #: appPlugins/ToolExtract.py:1030 appPlugins/ToolPunchGerber.py:2047 msgid "Processed Pads Type" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:29 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:29 #: appPlugins/ToolExtract.py:1032 appPlugins/ToolPunchGerber.py:2049 msgid "" "The type of pads shape to be processed.\n" "If the PCB has many SMD pads with rectangular pads,\n" "disable the Rectangular aperture." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:45 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:45 #: appPlugins/ToolExtract.py:1065 appPlugins/ToolPunchGerber.py:2078 msgid "Process Circular Pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:51 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:175 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:51 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:172 #: appPlugins/ToolExtract.py:1071 appPlugins/ToolExtract.py:1211 #: appPlugins/ToolPunchGerber.py:2084 appPlugins/ToolPunchGerber.py:2245 msgid "Oblong" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:53 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:53 #: appPlugins/ToolExtract.py:1073 appPlugins/ToolPunchGerber.py:2086 msgid "Process Oblong Pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:61 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:61 #: appPlugins/ToolExtract.py:1081 appPlugins/ToolPunchGerber.py:2094 msgid "Process Square Pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:69 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:69 #: appPlugins/ToolExtract.py:1089 appPlugins/ToolPunchGerber.py:2102 msgid "Process Rectangular Pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:75 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:214 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:75 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:211 #: appObjects/AppObjectTemplate.py:562 appPlugins/ToolExtract.py:1095 #: appPlugins/ToolExtract.py:1250 appPlugins/ToolPunchGerber.py:2108 #: appPlugins/ToolPunchGerber.py:2284 appPlugins/ToolReport.py:187 msgid "Others" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:77 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:77 #: appPlugins/ToolExtract.py:1097 appPlugins/ToolPunchGerber.py:2110 msgid "Process pads not in the categories above." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:98 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:122 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:99 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:119 #: appPlugins/ToolExtract.py:1158 appPlugins/ToolExtract.py:1274 #: appPlugins/ToolPunchGerber.py:2163 appPlugins/ToolPunchGerber.py:2191 msgid "Fixed Diameter" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:99 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:147 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:100 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:144 #: appPlugins/ToolExtract.py:1160 appPlugins/ToolExtract.py:1189 #: appPlugins/ToolPunchGerber.py:2165 appPlugins/ToolPunchGerber.py:2219 msgid "Fixed Annular Ring" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:100 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:101 #: appPlugins/ToolExtract.py:1159 appPlugins/ToolPunchGerber.py:2164 msgid "Proportional" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:106 appPlugins/ToolExtract.py:1149 msgid "" "The method for processing pads. Can be:\n" "- Fixed Diameter -> all holes will have a set size\n" "- Fixed Annular Ring -> all holes will have a set annular ring\n" "- Proportional -> each hole size will be a fraction of the pad size" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:138 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:135 #: appPlugins/ToolExtract.py:1284 appPlugins/ToolPunchGerber.py:2201 msgid "Fixed hole diameter." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:149 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:146 #: appPlugins/ToolExtract.py:1191 appPlugins/ToolPunchGerber.py:2221 msgid "" "The size of annular ring.\n" "The copper sliver between the hole exterior\n" "and the margin of the copper pad." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:164 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:161 #: appPlugins/ToolExtract.py:1200 appPlugins/ToolPunchGerber.py:2234 msgid "The size of annular ring for circular pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:177 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:174 #: appPlugins/ToolExtract.py:1213 appPlugins/ToolPunchGerber.py:2247 msgid "The size of annular ring for oblong pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:190 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:187 #: appPlugins/ToolExtract.py:1226 appPlugins/ToolPunchGerber.py:2260 msgid "The size of annular ring for square pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:203 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:200 #: appPlugins/ToolExtract.py:1239 appPlugins/ToolPunchGerber.py:2273 msgid "The size of annular ring for rectangular pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:216 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:213 #: appPlugins/ToolExtract.py:1252 appPlugins/ToolPunchGerber.py:2286 msgid "The size of annular ring for other pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:229 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:226 #: appPlugins/ToolExtract.py:1302 appPlugins/ToolPunchGerber.py:2298 msgid "Proportional Diameter" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:244 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:241 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:63 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:123 appPlugins/ToolFilm.py:1363 #: appPlugins/ToolFilm.py:1434 msgid "Factor" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:246 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:243 #: appPlugins/ToolExtract.py:1313 appPlugins/ToolPunchGerber.py:2309 msgid "" "Proportional Diameter.\n" "The hole diameter will be a fraction of the pad size." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:256 appPlugins/ToolExtract.py:1340 #: appPlugins/ToolExtract.py:1368 msgid "Extract Soldermask" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:258 appPlugins/ToolExtract.py:1342 #: appPlugins/ToolExtract.py:1371 msgid "Extract soldermask from a given Gerber file." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:270 appPlugins/ToolExtract.py:1354 msgid "" "This set how much the soldermask extends\n" "beyond the margin of the pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:284 appPlugins/ToolExtract.py:1385 #: appPlugins/ToolExtract.py:1430 msgid "Extract Cutout" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:286 appPlugins/ToolExtract.py:1387 #: appPlugins/ToolExtract.py:1433 msgid "Extract a cutout from a given Gerber file." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:313 appPlugins/ToolExtract.py:1414 msgid "The thickness of the line that makes the cutout geometry." msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:20 msgid "Fiducials Plugin" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:29 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:29 #: appPlugins/ToolCopperThieving.py:1300 appPlugins/ToolEtchCompensation.py:393 #: appPlugins/ToolFiducials.py:1053 appPlugins/ToolMarkers.py:1284 #: appPlugins/ToolObjectDistance.py:449 appPlugins/ToolOptimal.py:512 #: appPlugins/ToolSolderPaste.py:1356 msgid "Parameters used for this tool." msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:42 #: appPlugins/ToolFiducials.py:1066 msgid "" "This set the fiducial diameter if fiducial type is circular,\n" "otherwise is the size of the fiducial.\n" "The soldermask opening is double than that." msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:70 #: appPlugins/ToolFiducials.py:1094 msgid "Up" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:71 #: appPlugins/ToolFiducials.py:1095 msgid "Down" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74 #: appPlugins/ToolFiducials.py:1098 msgid "Second fiducial" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:76 #: appPlugins/ToolFiducials.py:1100 msgid "" "The position for the second fiducial.\n" "- 'Up' - the order is: bottom-left, top-left, top-right.\n" "- 'Down' - the order is: bottom-left, bottom-right, top-right.\n" "- 'None' - there is no second fiducial. The order is: bottom-left, top-right." msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:90 #: appPlugins/ToolFiducials.py:1114 msgid "Fiducial Type" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:92 #: appPlugins/ToolFiducials.py:1116 msgid "" "The type of fiducial.\n" "- 'Circular' - this is the regular fiducial.\n" "- 'Cross' - cross lines fiducial.\n" "- 'Chess' - chess pattern fiducial." msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:99 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:47 appPlugins/ToolFiducials.py:1123 #: appPlugins/ToolMarkers.py:1301 msgid "Cross" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:99 #: appPlugins/ToolFiducials.py:1123 msgid "Chess" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:105 #: appPlugins/ToolFiducials.py:1129 msgid "Line thickness" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:133 #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:67 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:48 appPlugins/ToolCutOut.py:2554 #: appPlugins/ToolDblSided.py:1069 appPlugins/ToolFiducials.py:1162 #: appPlugins/ToolLevelling.py:1904 appPlugins/ToolMarkers.py:1457 #: appPlugins/ToolPunchGerber.py:2340 msgid "Manual" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:137 #: appPlugins/ToolFiducials.py:1166 msgid "" "- 'Auto' - automatic placement of fiducials in the corners of the bounding box.\n" "- 'Manual' - manual placement of fiducials." msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:20 msgid "Invert Gerber Plugin" msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:29 msgid "" "A tool to invert Gerber geometry from positive to negative\n" "and in revers." msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:43 appPlugins/ToolInvertGerber.py:258 msgid "" "Distance by which to avoid\n" "the edges of the Gerber object." msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:57 appPlugins/ToolInvertGerber.py:269 msgid "Lines Join Style" msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:59 appPlugins/ToolInvertGerber.py:271 msgid "" "The way that the lines in the object outline will be joined.\n" "Can be:\n" "- rounded -> an arc is added between two joining lines\n" "- square -> the lines meet in 90 degrees angle\n" "- bevel -> the lines are joined by a third line" msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:78 appPlugins/ToolInvertGerber.py:280 msgid "Bevel" msgstr "" #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:20 msgid "Optimal Plugin" msgstr "" #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:29 msgid "" "A tool to find the minimum distance between\n" "every two Gerber geometric elements" msgstr "" #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:45 appPlugins/ToolOptimal.py:522 msgid "Precision" msgstr "" #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:47 msgid "Number of decimals for the distances and coordinates in this tool." msgstr "" #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:20 msgid "Punch Gerber Options" msgstr "" #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:107 #: appPlugins/ToolPunchGerber.py:2145 msgid "" "The punch hole source can be:\n" "- Excellon Object-> the Excellon object drills center will serve as reference.\n" "- Fixed Diameter -> will try to use the pads center as reference adding fixed diameter " "holes.\n" "- Fixed Annular Ring -> will try to keep a set annular ring.\n" "- Proportional -> will make a Gerber punch hole having the diameter a percentage of the " "pad diameter." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:20 msgid "QRCode Plugin" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:29 msgid "" "A tool to create a QRCode that can be inserted\n" "into a selected Gerber file, or it can be exported as a file." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:42 appMain.py:8641 #: appPlugins/ToolQRCode.py:815 msgid "Version" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:44 appPlugins/ToolQRCode.py:817 msgid "" "QRCode version can have values from 1 (21x21 boxes)\n" "to 40 (177x177 boxes)." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:55 appPlugins/ToolQRCode.py:828 msgid "Error correction" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:57 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:68 appPlugins/ToolQRCode.py:830 #: appPlugins/ToolQRCode.py:841 #, python-format msgid "" "Parameter that controls the error correction used for the QR Code.\n" "L = maximum 7%% errors can be corrected\n" "M = maximum 15%% errors can be corrected\n" "Q = maximum 25%% errors can be corrected\n" "H = maximum 30%% errors can be corrected." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:78 appPlugins/ToolQRCode.py:851 msgid "Box Size" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:80 appPlugins/ToolQRCode.py:853 msgid "" "Box size control the overall size of the QRcode\n" "by adjusting the size of each box in the code." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:91 appPlugins/ToolQRCode.py:864 msgid "Border Size" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:93 appPlugins/ToolQRCode.py:866 msgid "" "Size of the QRCode border. How many boxes thick is the border.\n" "Default value is 4. The width of the clearance around the QRCode." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:104 appPlugins/ToolQRCode.py:773 msgid "QRCode Data" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:106 appPlugins/ToolQRCode.py:775 msgid "QRCode Data. Alphanumeric text to be encoded in the QRCode." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:110 appPlugins/ToolQRCode.py:789 msgid "Add here the text to be included in the QRCode..." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:116 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:222 appPlugins/ToolFilm.py:1568 #: appPlugins/ToolQRCode.py:877 msgid "Polarity" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:118 appPlugins/ToolQRCode.py:879 msgid "" "Choose the polarity of the QRCode.\n" "It can be drawn in a negative way (squares are clear)\n" "or in a positive way (squares are opaque)." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:122 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:221 appPlugins/ToolFilm.py:1566 #: appPlugins/ToolQRCode.py:883 msgid "Negative" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:123 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:220 appPlugins/ToolFilm.py:1565 #: appPlugins/ToolQRCode.py:884 msgid "Positive" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:125 appPlugins/ToolQRCode.py:886 msgid "" "Choose the type of QRCode to be created.\n" "If added on a Silkscreen Gerber file the QRCode may\n" "be added as positive. If it is added to a Copper Gerber\n" "file then perhaps the QRCode can be added as negative." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:136 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:142 appPlugins/ToolQRCode.py:897 #: appPlugins/ToolQRCode.py:903 msgid "" "The bounding box, meaning the empty space that surrounds\n" "the QRCode geometry, can have a rounded or a square shape." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:149 appPlugins/ToolQRCode.py:931 msgid "Fill Color" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:151 appPlugins/ToolQRCode.py:933 msgid "Set the QRCode fill color (squares color)." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:159 appPlugins/ToolQRCode.py:955 msgid "Back Color" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:161 appPlugins/ToolQRCode.py:957 msgid "Set the QRCode background color." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:20 msgid "Check Rules Plugin" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:22 msgid "" "A tool to check if Gerber files are within a set\n" "of Manufacturing Rules." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:31 #: appPlugins/ToolRulesCheck.py:1209 appPlugins/ToolRulesCheck.py:1255 #: appPlugins/ToolRulesCheck.py:1321 appPlugins/ToolRulesCheck.py:1463 msgid "Copper" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:31 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:130 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:208 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:243 #: appPlugins/ToolRulesCheck.py:1209 appPlugins/ToolRulesCheck.py:1216 #: appPlugins/ToolRulesCheck.py:1223 appPlugins/ToolRulesCheck.py:1230 #: appPlugins/ToolRulesCheck.py:1463 appPlugins/ToolRulesCheck.py:1573 #: appPlugins/ToolRulesCheck.py:1660 appPlugins/ToolRulesCheck.py:1698 msgid "Rules" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:41 #: appPlugins/ToolRulesCheck.py:444 appPlugins/ToolRulesCheck.py:1473 msgid "Trace Size" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:43 #: appPlugins/ToolRulesCheck.py:1475 msgid "This checks if the minimum size for traces is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:50 #: appPlugins/ToolRulesCheck.py:1482 msgid "Minimum acceptable trace size." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:62 #: appPlugins/ToolRulesCheck.py:676 appPlugins/ToolRulesCheck.py:706 #: appPlugins/ToolRulesCheck.py:1496 msgid "Copper to Copper clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:64 #: appPlugins/ToolRulesCheck.py:1498 msgid "" "This checks if the minimum clearance between copper\n" "features is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:72 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:94 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:150 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:172 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:194 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:229 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:263 #: appPlugins/ToolRulesCheck.py:1506 appPlugins/ToolRulesCheck.py:1531 #: appPlugins/ToolRulesCheck.py:1593 appPlugins/ToolRulesCheck.py:1618 #: appPlugins/ToolRulesCheck.py:1643 appPlugins/ToolRulesCheck.py:1681 #: appPlugins/ToolRulesCheck.py:1718 msgid "Minimum acceptable clearance value." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:84 #: appPlugins/ToolRulesCheck.py:736 appPlugins/ToolRulesCheck.py:742 #: appPlugins/ToolRulesCheck.py:755 appPlugins/ToolRulesCheck.py:762 #: appPlugins/ToolRulesCheck.py:1521 msgid "Copper to Outline clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:86 #: appPlugins/ToolRulesCheck.py:1523 msgid "" "This checks if the minimum clearance between copper\n" "features and the outline is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:106 #: appPlugins/ToolRulesCheck.py:1002 appPlugins/ToolRulesCheck.py:1008 #: appPlugins/ToolRulesCheck.py:1024 appPlugins/ToolRulesCheck.py:1031 #: appPlugins/ToolRulesCheck.py:1546 msgid "Minimum Annular Ring" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:108 #: appPlugins/ToolRulesCheck.py:1548 msgid "" "This checks if the minimum copper ring left by drilling\n" "a hole into a pad is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:116 #: appPlugins/ToolRulesCheck.py:1556 msgid "Minimum acceptable ring value." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:130 #: appPlugins/ToolRulesCheck.py:1216 appPlugins/ToolRulesCheck.py:1291 #: appPlugins/ToolRulesCheck.py:1357 appPlugins/ToolRulesCheck.py:1573 msgid "Silk" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:140 #: appPlugins/ToolRulesCheck.py:1583 msgid "Silk to Silk Clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:142 #: appPlugins/ToolRulesCheck.py:1585 msgid "" "This checks if the minimum clearance between silkscreen\n" "features and silkscreen features is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:162 #: appPlugins/ToolRulesCheck.py:845 appPlugins/ToolRulesCheck.py:851 #: appPlugins/ToolRulesCheck.py:869 appPlugins/ToolRulesCheck.py:1608 msgid "Silk to Solder Mask Clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:164 #: appPlugins/ToolRulesCheck.py:1610 msgid "" "This checks if the minimum clearance between silkscreen\n" "features and soldermask features is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:184 #: appPlugins/ToolRulesCheck.py:899 appPlugins/ToolRulesCheck.py:905 #: appPlugins/ToolRulesCheck.py:919 appPlugins/ToolRulesCheck.py:926 #: appPlugins/ToolRulesCheck.py:1633 msgid "Silk to Outline Clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:186 #: appPlugins/ToolRulesCheck.py:1635 msgid "" "This checks if the minimum clearance between silk\n" "features and the outline is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:208 #: appPlugins/ToolRulesCheck.py:1223 appPlugins/ToolRulesCheck.py:1660 msgid "Soldermask" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:218 #: appPlugins/ToolRulesCheck.py:937 appPlugins/ToolRulesCheck.py:964 #: appPlugins/ToolRulesCheck.py:1670 msgid "Minimum Solder Mask Sliver" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:220 #: appPlugins/ToolRulesCheck.py:1672 msgid "" "This checks if the minimum clearance between soldermask\n" "features and soldermask features is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:243 #: appPlugins/ToolRulesCheck.py:1230 appPlugins/ToolRulesCheck.py:1698 msgid "Holes" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:253 #: appPlugins/ToolRulesCheck.py:388 appPlugins/ToolRulesCheck.py:1708 msgid "Hole to Hole Clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:255 #: appPlugins/ToolRulesCheck.py:1710 msgid "" "This checks if the minimum clearance between a drill hole\n" "and another drill hole is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:275 #: appPlugins/ToolRulesCheck.py:362 appPlugins/ToolRulesCheck.py:1733 msgid "Hole Size" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:277 #: appPlugins/ToolRulesCheck.py:1735 msgid "" "This checks if the drill holes\n" "sizes are above the threshold." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:285 #: appPlugins/ToolRulesCheck.py:1743 msgid "Minimum acceptable drill size." msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:20 msgid "2-Sided Plugin" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:25 appPlugins/ToolDblSided.py:1027 msgid "PCB Alignment" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:27 msgid "" "A tool to help in creating a double sided\n" "PCB using alignment holes." msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:47 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:282 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:81 appPlugins/ToolCutOut.py:2733 #: appPlugins/ToolDblSided.py:1042 appPlugins/ToolMarkers.py:1509 msgid "Drill Dia" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:49 appPlugins/ToolDblSided.py:1044 #: appPlugins/ToolDblSided.py:1049 msgid "Diameter of the drill for the alignment holes." msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:58 appPlugins/ToolDblSided.py:1060 msgid "" "The content of the Excellon file.\n" "X - Pairs of drill holes mirrored vertically from reference point\n" "Y - Pairs of drill holes mirrored horizontally from reference point\n" "Manual - no mirroring; drill holes in place" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:78 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:170 msgid "Mirror Axis" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:80 appPlugins/ToolDblSided.py:869 msgid "Mirror vertically (X) or horizontally (Y)." msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:92 appPlugins/ToolDblSided.py:857 msgid "Mirror Operation" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:108 appPlugins/ToolDblSided.py:899 msgid "Box" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:109 appMain.py:8650 #: appPlugins/ToolDblSided.py:900 msgid "Snap" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:112 msgid "Axis Ref" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:114 appPlugins/ToolDblSided.py:889 msgid "" "The coordinates used as reference for the mirror operation.\n" "Can be:\n" "- Point -> a set of coordinates (x,y) around which the object is mirrored\n" "- Box -> a set of coordinates (x, y) obtained from the center of the\n" "bounding box of another object selected below\n" "- Snap -> a point defined by the center of a drill hole in a Excellon object" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:20 msgid "Calculators Plugin" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:27 msgid "V-Shape Tool Calculator" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:29 msgid "" "Calculate the tool diameter for a given V-shape tool,\n" "having the tip diameter, tip angle and\n" "depth-of-cut as parameters." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:47 #: appPlugins/ToolCalculators.py:606 msgid "Tip Diameter" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:49 #: appPlugins/ToolCalculators.py:608 msgid "" "This is the tool tip diameter.\n" "It is specified by manufacturer." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:61 #: appPlugins/ToolCalculators.py:621 msgid "Tip Angle" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:63 msgid "" "This is the angle on the tip of the tool.\n" "It is specified by manufacturer." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:77 msgid "" "This is depth to cut into material.\n" "In the CNCJob object it is the CutZ parameter." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:86 msgid "ElectroPlating Calculator" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:88 #: appPlugins/ToolCalculators.py:669 msgid "" "This calculator is useful for those who plate the via/pad/drill holes,\n" "using a method like graphite ink or calcium hypophosphite ink or palladium chloride." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:105 #: appPlugins/ToolCalculators.py:698 msgid "Board Length" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:107 msgid "This is the board length. In centimeters." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:117 #: appPlugins/ToolCalculators.py:717 appPlugins/ToolCalculators.py:718 msgid "Board Width" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:119 msgid "This is the board width.In centimeters." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:125 msgid "This is the board area." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:135 #: appPlugins/ToolCalculators.py:760 msgid "Current Density" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:141 msgid "" "Current density to pass through the board. \n" "In Amps per Square Feet ASF." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:147 #: appPlugins/ToolCalculators.py:781 msgid "Copper Growth" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:153 msgid "" "How thick the copper growth is intended to be.\n" "In microns." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:21 msgid "Cutout Plugin" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:28 msgid "" "Create toolpaths to cut around\n" "the PCB and separate it from\n" "the original board." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:46 appPlugins/ToolCutOut.py:2332 msgid "" "Diameter of the tool used to cutout\n" "the PCB shape out of the surrounding material." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:84 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:70 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:100 appPlugins/ToolCutOut.py:2414 #: appPlugins/ToolDrilling.py:2538 appPlugins/ToolMilling.py:4567 msgid "Multi-Depth" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:107 appPlugins/ToolCutOut.py:2273 msgid "Kind" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:109 appPlugins/ToolCutOut.py:2275 msgid "" "Choice of what kind the object we want to cutout is.\n" "- Single: contain a single PCB Gerber outline object.\n" "- Panel: a panel PCB Gerber object, which is made\n" "out of many individual PCB outlines." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:176 appPlugins/ToolCutOut.py:2496 msgid "Mouse Bytes" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:236 msgid "" "Number of gaps used for the cutout.\n" "There can be maximum 8 bridges/gaps.\n" "The choices are:\n" "- None - no gaps\n" "- lr - left + right\n" "- tb - top + bottom\n" "- 4 - left + right +top + bottom\n" "- 2lr - 2*left + 2*right\n" "- 2tb - 2*top + 2*bottom\n" "- 8 - 2*left + 2*right +2*top + 2*bottom" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:257 appPlugins/ToolCutOut.py:2619 #: appPlugins/ToolDistance.py:848 appPlugins/ToolFiducials.py:1173 #: appPlugins/ToolMarkers.py:1462 msgid "Big cursor" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:259 appPlugins/ToolCutOut.py:2621 msgid "Use a big cursor when adding manual gaps." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:263 appPlugins/ToolCutOut.py:2697 #: appPlugins/ToolCutOut.py:2771 msgid "Cut by Drilling" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:264 appPlugins/ToolCutOut.py:2698 #: appPlugins/ToolCutOut.py:2774 msgid "Create a series of drill holes following a geometry line." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:284 appPlugins/ToolCutOut.py:2735 msgid "" "Diameter of the tool used to cutout\n" "the PCB by drilling." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:297 appPlugins/ToolCutOut.py:2748 msgid "" "Distance between the center of\n" "two neighboring drill holes." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:21 msgid "Drilling Plugin" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:30 appPlugins/ToolDrilling.py:2382 msgid "Create CNCJob with toolpaths for drilling or milling holes." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:41 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:55 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:56 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:58 appPlugins/ToolDrilling.py:2467 #: appPlugins/ToolIsolation.py:3455 appPlugins/ToolMilling.py:4120 #: appPlugins/ToolNCC.py:4160 appPlugins/ToolPaint.py:3044 msgid "Tool order" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:42 appPlugins/ToolDrilling.py:2468 #: appPlugins/ToolMilling.py:4121 msgid "" "This set the way that the tools in the tools table are used.\n" "'Default' --> the order from the file\n" "'Forward' --> tools will be ordered from small to big\n" "'Reverse' --> tools will ordered from big to small." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:48 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:65 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:67 appPlugins/ToolDrilling.py:2474 #: appPlugins/ToolIsolation.py:3464 appPlugins/ToolMilling.py:4127 #: appPlugins/ToolNCC.py:4172 appPlugins/ToolPaint.py:3053 #: appPlugins/ToolSolderPaste.py:1551 msgid "Forward" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:48 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:65 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:67 appPlugins/ToolDrilling.py:2474 #: appPlugins/ToolIsolation.py:3464 appPlugins/ToolMilling.py:4127 #: appPlugins/ToolNCC.py:4172 appPlugins/ToolPaint.py:3053 #: appPlugins/ToolSolderPaste.py:1589 msgid "Reverse" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:142 appPlugins/ToolSolderPaste.py:1449 msgid "Tool change" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:109 appPlugins/ToolDrilling.py:2762 #: appPlugins/ToolMilling.py:4781 msgid "" "Include tool-change sequence\n" "in G-Code (Pause for tool change)." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:115 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:152 msgid "Toolchange Z" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:117 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:155 appPlugins/ToolDrilling.py:2770 #: appPlugins/ToolMilling.py:4789 msgid "" "Z-axis position (height) for\n" "tool change." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:129 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:170 appPlugins/ToolDrilling.py:2813 #: appPlugins/ToolMilling.py:4819 msgid "End move Z" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:131 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:172 appPlugins/ToolDrilling.py:2815 #: appPlugins/ToolMilling.py:4821 msgid "" "Height of the tool after\n" "the last move at the end of the job." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:142 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:186 appPlugins/ToolDrilling.py:2829 #: appPlugins/ToolMilling.py:4835 msgid "End move X,Y" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:144 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:188 appPlugins/ToolDrilling.py:2831 #: appPlugins/ToolMilling.py:4837 msgid "" "End move X,Y position. In format (x,y).\n" "If no value is entered then there is no move\n" "on X,Y plane at the end of the job." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:169 msgid "Spindle Speed" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:183 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:245 msgid "Enable Dwell" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:185 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:247 appPlugins/ToolDrilling.py:2652 #: appPlugins/ToolMilling.py:4731 msgid "" "Pause to allow the spindle to reach its\n" "speed before cutting." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:193 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:253 appPlugins/ToolDrilling.py:2664 #: appPlugins/ToolMilling.py:4742 msgid "Number of time units for spindle to dwell." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:202 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:266 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:266 #: appPlugins/ToolDrilling.py:2880 appPlugins/ToolMilling.py:4886 #: appPlugins/ToolSolderPaste.py:1639 msgid "Preprocessor" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:204 msgid "" "The preprocessor JSON file that dictates\n" "Gcode output." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:229 msgid "Drilling Slots" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:277 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:294 msgid "A list of advanced parameters." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:301 msgid "Toolchange X,Y" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:303 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:307 appPlugins/ToolDrilling.py:2785 #: appPlugins/ToolMilling.py:4803 msgid "Toolchange X,Y position." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:311 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:315 appPlugins/ToolDrilling.py:2801 msgid "Start Z" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:313 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:317 appPlugins/ToolDrilling.py:2803 msgid "" "Height of the tool just after starting the work.\n" "Delete the value if you don't need this feature." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:338 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:101 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:367 appPlugins/ToolDrilling.py:2843 #: appPlugins/ToolLevelling.py:1867 appPlugins/ToolMilling.py:4849 msgid "Probe Z depth" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:340 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:103 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:369 appPlugins/ToolDrilling.py:2845 #: appPlugins/ToolLevelling.py:1869 appPlugins/ToolMilling.py:4851 msgid "" "The maximum depth that the probe is allowed\n" "to probe. Negative value, in current units." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:351 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:382 appPlugins/ToolDrilling.py:2862 #: appPlugins/ToolMilling.py:4868 msgid "Feedrate Probe" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:353 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:116 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:384 appPlugins/ToolDrilling.py:2864 #: appPlugins/ToolLevelling.py:1882 appPlugins/ToolMilling.py:4870 msgid "The feedrate used while the probe is probing." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:363 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:396 msgid "Spindle direction" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:365 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:398 msgid "" "This sets the direction that the spindle is rotating.\n" "It can be either:\n" "- CW = clockwise or\n" "- CCW = counter clockwise" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:377 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:410 appPlugins/ToolDrilling.py:2634 #: appPlugins/ToolMilling.py:4713 msgid "Min Power" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:379 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:412 appPlugins/ToolDrilling.py:2636 #: appPlugins/ToolMilling.py:4715 msgid "The laser power when the laser is travelling." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:390 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:423 msgid "Fast Plunge" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:392 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:425 msgid "" "By checking this, the vertical move from\n" "Z_Toolchange to Z_move is done with G0,\n" "meaning the fastest speed available.\n" "WARNING: the move is done at Toolchange X,Y coords." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:400 msgid "Fast Retract" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:402 msgid "" "Exit hole strategy.\n" " - When uncheked, while exiting the drilled hole the drill bit\n" "will travel slow, with set feedrate (G1), up to zero depth and then\n" "travel as fast as possible (G0) to the Z Move (travel height).\n" " - When checked the travel from Z cut (cut depth) to Z_move\n" "(travel height) is done as fast as possible (G0) in one move." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:420 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:440 msgid "Area Exclusion" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:422 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:442 msgid "Area exclusion parameters." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:433 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:453 msgid "Exclusion areas" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:436 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:456 appPlugins/ToolDrilling.py:2900 #: appPlugins/ToolMilling.py:4952 msgid "" "Include exclusion areas.\n" "In those areas the travel of the tools\n" "is forbidden." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:446 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:332 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:466 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:323 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:287 appPlugins/ToolDrilling.py:2971 #: appPlugins/ToolFollow.py:743 appPlugins/ToolIsolation.py:3957 #: appPlugins/ToolMilling.py:5024 appPlugins/ToolNCC.py:4572 appPlugins/ToolPaint.py:3331 msgid "The kind of selection shape used for area selection." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:456 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:476 appPlugins/ToolDrilling.py:2922 #: appPlugins/ToolDrilling.py:2939 appPlugins/ToolMilling.py:4975 #: appPlugins/ToolMilling.py:4992 msgid "Strategy" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:457 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:477 appPlugins/ToolDrilling.py:2940 #: appPlugins/ToolMilling.py:4993 msgid "" "The strategy followed when encountering an exclusion area.\n" "Can be:\n" "- Over -> when encountering the area, the tool will go to a set height\n" "- Around -> will avoid the exclusion area by going around the area" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:461 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:481 appPlugins/ToolDrilling.py:849 #: appPlugins/ToolDrilling.py:2944 appPlugins/ToolMilling.py:914 #: appPlugins/ToolMilling.py:4997 msgid "Over" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:462 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:482 appPlugins/ToolDrilling.py:849 #: appPlugins/ToolDrilling.py:2945 appPlugins/ToolMilling.py:914 #: appPlugins/ToolMilling.py:4998 msgid "Around" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:468 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:488 appPlugins/ToolDrilling.py:2922 #: appPlugins/ToolDrilling.py:2952 appPlugins/ToolMilling.py:4975 #: appPlugins/ToolMilling.py:5005 msgid "Over Z" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:469 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:489 appPlugins/ToolDrilling.py:2953 #: appPlugins/ToolMilling.py:5006 msgid "" "The height Z to which the tool will rise in order to avoid\n" "an interdiction area." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:21 msgid "Film Plugin" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:28 appPlugins/ToolFilm.py:1335 msgid "Adjustments" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:30 appPlugins/ToolFilm.py:1337 msgid "Compensate print distortions." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:44 appPlugins/ToolFilm.py:1351 msgid "" "A value greater than 1 will compact the film\n" "while a value less than 1 will jolt it." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:59 appPlugins/ToolFilm.py:1359 msgid "" "'Length' -> scale by a length value\n" "'Factor' -> scale by a ratio" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:91 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:149 appPlugins/ToolFilm.py:1391 #: appPlugins/ToolFilm.py:1462 msgid "The reference point to be used as origin for the adjustment." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:154 appPlugins/ToolFiducials.py:985 #: appPlugins/ToolFilm.py:1396 appPlugins/ToolFilm.py:1467 appPlugins/ToolMarkers.py:1420 msgid "Bottom Left" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96 appPlugins/ToolFilm.py:1396 #: appPlugins/ToolMarkers.py:1412 msgid "Top Left" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96 appPlugins/ToolFilm.py:1396 #: appPlugins/ToolMarkers.py:1424 msgid "Bottom Right" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96 appPlugins/ToolFilm.py:1396 msgid "Top right" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:102 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:118 appPlugins/ToolFilm.py:1419 #: appPlugins/ToolTransform.py:717 msgid "Skew" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:104 appPlugins/ToolFilm.py:1421 msgid "" "Positive values will skew to the right\n" "while negative values will skew to the left." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:118 msgid "" "'Length' -> deform by a length value\n" "'Angle' -> deform by an angle\n" "'Factor' -> deform by a ratio between what should be and what is" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:162 appPlugins/ToolFilm.py:1492 #: appPlugins/ToolFilm.py:1502 msgid "Mirror the film geometry on the selected axis or on both." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:185 msgid "" "Create a PCB film from a Gerber or Geometry object.\n" "The file is saved in SVG format." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:200 appPlugins/ToolFilm.py:1530 msgid "" "Create a convex shape surrounding the entire PCB.\n" "If not checked the shape is rectangular." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:224 appPlugins/ToolFilm.py:1570 msgid "Generate a Positive black film or a Negative film." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:230 msgid "Film Color" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:232 msgid "Set the film color when positive film is selected." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:245 appPlugins/ToolFilm.py:1581 msgid "Border" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:247 appPlugins/ToolFilm.py:1583 msgid "" "Specify a border around the object.\n" "Only for negative film.\n" "It helps if we use as a Box Object the same \n" "object as in Film Object. It will create a thick\n" "black bar around the actual print allowing for a\n" "better delimitation of the outline features which are of\n" "white color like the rest and which may confound with the\n" "surroundings if not for this border." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:265 appPlugins/ToolFilm.py:1555 msgid "Scale Stroke" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:267 appPlugins/ToolFilm.py:1557 msgid "" "Scale the line stroke thickness of each feature in the SVG file.\n" "It means that the line that envelope each SVG feature will be thicker or thinner,\n" "therefore the fine features may be more affected by this parameter." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:274 appPlugins/ToolFilm.py:1675 msgid "SVG" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:275 appPlugins/ToolFilm.py:1676 msgid "PNG" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:276 appPlugins/ToolFilm.py:1677 msgid "PDF" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:279 appPlugins/ToolFilm.py:1666 msgid "Film Type" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:281 appPlugins/ToolFilm.py:1668 msgid "" "The file type of the saved film. Can be:\n" "- 'SVG' -> open-source vectorial format\n" "- 'PNG' -> raster image\n" "- 'PDF' -> portable document format" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:290 appPlugins/ToolFilm.py:1684 msgid "Page Orientation" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:303 appPlugins/ToolFilm.py:1700 msgid "Page Size" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:304 appPlugins/ToolFilm.py:1701 msgid "A selection of standard ISO 216 page sizes." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:371 appPlugins/ToolFilm.py:1767 msgid "Default value is 96 DPI. Change this value to scale the PNG file." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:20 msgid "Isolation Plugin" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:42 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:41 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:43 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:45 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:42 msgid "Tools Dia" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:49 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:50 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:54 appPlugins/ToolMarkers.py:1473 msgid "Comma separated values" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:56 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:57 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:59 appPlugins/ToolIsolation.py:3456 #: appPlugins/ToolNCC.py:4161 appPlugins/ToolPaint.py:3045 msgid "" "This set the way that the tools in the tools table are used.\n" "'Default' --> means that the used order is the one in the tool table\n" "'Forward' --> means that the tools will be ordered from small to big\n" "'Reverse' --> means that the tools will ordered from big to small\n" "\n" "WARNING: using rest machining will automatically set the order\n" "in reverse and disable this control." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:70 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:53 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:71 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:73 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:80 appPlugins/ToolIsolation.py:3621 #: appPlugins/ToolMilling.py:4512 msgid "V-Tip Dia" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:72 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:56 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:73 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:75 appPlugins/ToolIsolation.py:3624 #: appPlugins/ToolMilling.py:4515 msgid "The tip diameter for V-Shape Tool" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:82 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:68 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:83 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:86 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:94 appPlugins/ToolIsolation.py:3637 #: appPlugins/ToolMilling.py:4528 msgid "V-Tip Angle" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:84 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:71 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:85 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:88 appPlugins/ToolIsolation.py:3640 #: appPlugins/ToolMilling.py:4531 msgid "" "The tip angle for V-Shape Tool.\n" "In degree." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:98 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:99 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:108 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:102 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:111 msgid "" "Depth of cut into material. Negative value.\n" "In application units." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:117 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:118 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:120 appPlugins/ToolPaint.py:3080 msgid "" "Diameter for the new tool to add in the Tool Table.\n" "If the tool is V-shape type then this value is automatically\n" "calculated from the other parameters." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:138 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:158 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141 appPlugins/ToolCutOut.py:2370 msgid "Tool Parameters" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:177 appPlugins/ToolIsolation.py:3691 msgid "Pad Passes" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:179 appPlugins/ToolIsolation.py:3693 msgid "" "Width of the extra isolation gap for pads only,\n" "in number (integer) of tool widths." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:248 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:274 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:231 appPlugins/ToolDrilling.py:2747 #: appPlugins/ToolIsolation.py:3773 appPlugins/ToolMilling.py:4766 #: appPlugins/ToolNCC.py:4447 appPlugins/ToolPaint.py:3246 #: appPlugins/ToolSolderPaste.py:1627 msgid "Common Parameters" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:250 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:276 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:233 appPlugins/ToolDrilling.py:2749 #: appPlugins/ToolFollow.py:717 appPlugins/ToolIsolation.py:3775 #: appPlugins/ToolMilling.py:4768 appPlugins/ToolNCC.py:4449 appPlugins/ToolPaint.py:3247 #: appPlugins/ToolPanelize.py:1335 appPlugins/ToolSolderPaste.py:1629 #: appPlugins/ToolSub.py:811 msgid "Parameters that are common for all tools." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:261 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:287 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:244 appPlugins/ToolIsolation.py:3786 #: appPlugins/ToolNCC.py:4460 appPlugins/ToolPaint.py:3257 msgid "Rest" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:263 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:289 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:246 appPlugins/ToolIsolation.py:3789 #: appPlugins/ToolNCC.py:4464 appPlugins/ToolPaint.py:3260 msgid "" "If checked, use 'rest machining'.\n" "Basically it will process copper outside PCB features,\n" "using the biggest tool and continue with the next tools,\n" "from bigger to smaller, to process the copper features that\n" "could not be processed by previous tool, until there is\n" "nothing left to process or there are no more tools.\n" "\n" "If not checked, use the standard algorithm." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275 appPlugins/ToolIsolation.py:3811 msgid "Combine" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277 appPlugins/ToolIsolation.py:3813 msgid "Combine all passes into one object" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:283 appPlugins/ToolIsolation.py:3846 msgid "Except" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:284 appPlugins/ToolIsolation.py:3847 msgid "" "When the isolation geometry is generated,\n" "by checking this, the area of the object below\n" "will be subtracted from the isolation geometry." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:290 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:349 appPlugins/ToolIsolation.py:3820 #: appPlugins/ToolNCC.py:4585 msgid "Check validity" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:292 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:351 appPlugins/ToolIsolation.py:3822 #: appPlugins/ToolNCC.py:4587 msgid "" "If checked then the tools diameters are verified\n" "if they will provide a complete isolation." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:315 appPlugins/ToolIsolation.py:3886 msgid "" "Isolation scope. Choose what to isolate:\n" "- 'All' -> Isolate all the polygons in the object\n" "- 'Area Selection' -> Isolate polygons within a selection area.\n" "- 'Polygon Selection' -> Isolate a selection of polygons.\n" "- 'Reference Object' - will process the area specified by another object." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:323 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279 appPlugins/ToolIsolation.py:3894 #: appPlugins/ToolPaint.py:3297 msgid "Polygon Selection" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:342 appPlugins/ToolIsolation.py:3922 msgid "Interiors" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:344 appPlugins/ToolIsolation.py:3924 msgid "" "When checked the user can select interiors of a polygon.\n" "(holes in the polygon)." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:349 appPlugins/ToolIsolation.py:3801 msgid "Forced Rest" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:351 appPlugins/ToolIsolation.py:3803 msgid "" "When checked the isolation will be done with the current tool even if\n" "interiors of a polygon (holes in the polygon) could not be isolated.\n" "Works when 'rest machining' is used." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:365 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:339 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:303 msgid "Progressive" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:368 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:342 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:307 msgid "" "- 'Normal' - normal plotting, done at the end of the job\n" "- 'Progressive' - each shape is plotted after it is generated" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:20 msgid "Levelling Plugin" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:42 appPlugins/ToolLevelling.py:1898 msgid "" "Choose a mode for height map generation.\n" "- Manual: will pick a selection of probe points by clicking on canvas\n" "- Grid: will automatically generate a grid of probe points" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:49 appMain.py:8645 #: appPlugins/ToolLevelling.py:1905 msgid "Grid" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:56 appPlugins/ToolLevelling.py:1912 msgid "" "Choose a method for approximation of heights from autolevelling data.\n" "- Voronoi: will generate a Voronoi diagram\n" "- Bilinear: will use bilinear interpolation. Usable only for grid mode." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:62 appPlugins/ToolLevelling.py:1918 msgid "Voronoi" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:63 appPlugins/ToolLevelling.py:1919 msgid "Bilinear" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:73 appPlugins/ToolLevelling.py:1934 msgid "The number of grid columns." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:83 appPlugins/ToolLevelling.py:1945 msgid "The number of grid rows." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:89 appPlugins/ToolLevelling.py:1855 msgid "Probe Z travel" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:91 appPlugins/ToolLevelling.py:1857 msgid "The safe Z for probe travelling between probe points." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:114 appPlugins/ToolLevelling.py:1880 msgid "Probe Feedrate" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:130 appPlugins/ToolLevelling.py:1956 msgid "Controller" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:132 appPlugins/ToolLevelling.py:1958 msgid "" "The kind of controller for which to generate\n" "height map gcode." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:142 appPlugins/ToolLevelling.py:2191 msgid "Step" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:144 appPlugins/ToolLevelling.py:2193 msgid "Each jog action will move the axes with this value." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:157 appPlugins/ToolLevelling.py:2207 msgid "Feedrate when jogging." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:170 msgid "Safe height (Z) distance when jogging to origin." msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:20 msgid "Markers Options" msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:42 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:96 appPlugins/ToolMarkers.py:1296 msgid "Shape of the marker." msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:46 appPlugins/ToolMarkers.py:1300 msgid "Semi-Cross" msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:56 appPlugins/ToolMarkers.py:1310 msgid "The thickness of the line that makes the corner marker." msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:70 appPlugins/ToolMarkers.py:1324 msgid "The length of the line that makes the corner marker." msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:83 appPlugins/ToolMarkers.py:1511 msgid "Drill Diameter" msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:100 appPlugins/ToolMarkers.py:1356 msgid "Edge" msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:108 appPlugins/ToolMarkers.py:1338 msgid "Offset locations from the set reference." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:21 msgid "Milling Plugin" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:30 appPlugins/ToolMilling.py:3922 msgid "Create CNCJob with toolpaths for milling either Geometry or drill holes." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:128 msgid "" "Height of the tool when\n" "moving without cutting." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:145 msgid "" "Include tool-change sequence\n" "in the Machine Code (Pause for tool change)." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:200 appPlugins/ToolMilling.py:4612 msgid "" "Cutting speed in the XY\n" "plane in units per minute" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:215 msgid "" "Cutting speed in the XY\n" "plane in units per minute.\n" "It is called also Plunge." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:232 msgid "" "Speed of the spindle in RPM (optional).\n" "If LASER preprocessor is used,\n" "this value is the power of laser." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:268 msgid "" "The Preprocessor file that dictates\n" "the Machine Code (like GCode, RML, HPGL) output." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:305 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:149 #: appPlugins/ToolDrilling.py:2783 appPlugins/ToolMilling.py:4801 msgid "Toolchange X-Y" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:328 msgid "" "Cutting speed in the XY plane\n" "(in units per minute).\n" "This is for the rapid move G00.\n" "It is useful only for Marlin,\n" "ignore for any other cases." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:344 appPlugins/ToolMilling.py:4667 msgid "Re-cut" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:346 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:358 appPlugins/ToolMilling.py:4669 #: appPlugins/ToolMilling.py:4682 msgid "" "In order to remove possible\n" "copper leftovers where first cut\n" "meet with last cut, we generate an\n" "extended cut over the first cut section." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:506 msgid "Add Polish" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:508 msgid "" "Will add a Paint section at the end of the GCode.\n" "A metallic brush will clean the material after milling." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:548 appPlugins/ToolMilling.py:4484 msgid "" "Algorithm for polishing:\n" "- Standard: Fixed step inwards.\n" "- Seed-based: Outwards from seed.\n" "- Line-based: Parallel lines." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:565 msgid "Excellon Milling" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:567 msgid "Will mill Excellon holes progressively from the center of the hole." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:580 appPlugins/ToolMilling.py:4285 msgid "" "Milling type:\n" "- Drills -> will mill the drills associated with this tool\n" "- Slots -> will mill the slots associated with this tool\n" "- Both -> will mill both drills and mills or whatever is available" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:600 appPlugins/ToolMilling.py:4305 msgid "The diameter of the tool who will do the milling" msgstr "" #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:21 msgid "NCC Plugin" msgstr "" #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:28 msgid "" "Create a Geometry object with\n" "toolpaths to cut all non-copper regions." msgstr "" #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:251 msgid "Offset value" msgstr "" #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:312 appPlugins/ToolNCC.py:4538 msgid "" "Selection of area to be processed.\n" "- 'Itself' - the processing extent is based on the object that is processed.\n" " - 'Area Selection' - left mouse click to start selection of the area to be processed.\n" "- 'Reference Object' - will process the area specified by another object." msgstr "" #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:21 msgid "Paint Plugin" msgstr "" #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:259 appPlugins/ToolPaint.py:3287 msgid "" "Selection of area to be processed.\n" "- 'Polygon Selection' - left mouse click to add/remove polygons to be processed.\n" "- 'Area Selection' - left mouse click to start selection of the area to be processed.\n" "Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple areas.\n" "- 'All Polygons' - the process will start after click.\n" "- 'Reference Object' - will process the area specified by another object." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:20 msgid "Panelize Plugin" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:29 msgid "" "Create an object that contains an array of (x, y) elements,\n" "each element is a copy of the source object spaced\n" "at a X distance, Y distance of each other." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:95 appPlugins/ToolPanelize.py:1346 msgid "Geo" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:96 appPlugins/ToolPanelize.py:1347 msgid "Panel Type" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:98 appPlugins/ToolPanelize.py:1349 msgid "" "Choose the type of object for the panel object:\n" "- Gerber\n" "- Geometry" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:109 appPlugins/ToolPanelize.py:1359 msgid "" "Active only for Geometry panel type.\n" "When checked the application will find\n" "any two overlapping Line elements in the panel\n" "and will remove the overlapping parts, keeping only one of them." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:117 msgid "Constrain within" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:119 appPlugins/ToolPanelize.py:1369 msgid "" "Area define by DX and DY within to constrain the panel.\n" "DX and DY values are in current units.\n" "Regardless of how many columns and rows are desired,\n" "the final panel will have as many columns and rows as\n" "they fit completely within selected area." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:132 appPlugins/ToolPanelize.py:1381 msgid "Width (DX)" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:134 appPlugins/ToolPanelize.py:1383 msgid "" "The width (DX) within which the panel must fit.\n" "In current units." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:145 appPlugins/ToolPanelize.py:1393 msgid "Height (DY)" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:147 appPlugins/ToolPanelize.py:1395 msgid "" "The height (DY)within which the panel must fit.\n" "In current units." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:21 msgid "SolderPaste Plugin" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:30 msgid "" "A tool to create GCode for dispensing\n" "solder paste onto a PCB." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:54 msgid "New Nozzle Dia" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:56 #: appPlugins/ToolSolderPaste.py:1320 msgid "Diameter for the new tool to add in the Tool Table" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:69 #: appPlugins/ToolSolderPaste.py:1369 msgid "Offset from the boundary." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:70 #: appPlugins/ToolSolderPaste.py:1370 msgid "Fraction of tool diameter." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:87 msgid "Z Dispense Start" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:89 #: appPlugins/ToolSolderPaste.py:1415 msgid "The height (Z) when solder paste dispensing starts." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:100 #: appPlugins/ToolSolderPaste.py:1540 msgid "Z Dispense" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:102 #: appPlugins/ToolSolderPaste.py:1428 msgid "The height (Z) when doing solder paste dispensing." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:113 msgid "Z Dispense Stop" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:115 #: appPlugins/ToolSolderPaste.py:1441 msgid "The height (Z) when solder paste dispensing stops." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:126 msgid "Z Travel" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:128 #: appPlugins/ToolSolderPaste.py:1389 msgid "" "The height (Z) for travel between pads\n" "(without dispensing solder paste)." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:140 msgid "Z Toolchange" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:142 #: appPlugins/ToolSolderPaste.py:1476 msgid "The height (Z) for tool (nozzle) change." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:151 #: appPlugins/ToolSolderPaste.py:1462 msgid "" "The X,Y location for tool (nozzle) change.\n" "The format is (x, y) where x and y are real numbers." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:165 #: appPlugins/ToolSolderPaste.py:1501 msgid "Feedrate (speed) while moving on the X-Y plane." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:173 #: appPlugins/ToolSolderPaste.py:1509 msgid "Feedrate while moving as fast as possible." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:192 #: appPlugins/ToolSolderPaste.py:1528 msgid "" "Feedrate (speed) while moving vertically\n" "(on Z plane)." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:204 msgid "Feedrate Z Dispense" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:206 #: appPlugins/ToolSolderPaste.py:1542 msgid "" "Feedrate (speed) while moving up vertically\n" "to Dispense position (on Z plane)." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:217 msgid "Spindle Speed FWD" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:219 #: appPlugins/ToolSolderPaste.py:1567 msgid "" "The dispenser speed while pushing solder paste\n" "through the dispenser nozzle." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:231 msgid "Dwell FWD" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:233 #: appPlugins/ToolSolderPaste.py:1581 msgid "Pause after solder dispensing." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:243 msgid "Spindle Speed REV" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:245 #: appPlugins/ToolSolderPaste.py:1604 msgid "" "The dispenser speed while retracting solder paste\n" "through the dispenser nozzle." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:257 msgid "Dwell REV" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:259 #: appPlugins/ToolSolderPaste.py:1618 msgid "" "Pause after solder paste dispenser retracted,\n" "to allow pressure equilibrium." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:268 #: appPlugins/ToolSolderPaste.py:1641 msgid "Files that control the GCode generation." msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:17 msgid "Substractor Plugin" msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:26 msgid "" "A tool to substract one Gerber or Geometry object\n" "from another of the same type." msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:37 appPlugins/ToolSub.py:940 msgid "Close paths" msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:38 appPlugins/ToolSub.py:941 msgid "Checking this will close the paths cut by the subtractor object." msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:41 appPlugins/ToolSub.py:820 msgid "Delete source" msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:43 appPlugins/ToolSub.py:822 msgid "" "When checked will delete the source objects\n" "after a successful operation." msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:21 msgid "Transform Plugin" msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:30 msgid "" "Various transformations that can be applied\n" "on a application object." msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:44 appPlugins/ToolTransform.py:607 msgid "" "The reference point for Rotate, Skew, Scale, Mirror.\n" "Can be:\n" "- Origin -> it is the 0, 0 point\n" "- Selection -> the center of the bounding box of the selected objects\n" "- Point -> a custom point defined by X,Y coordinates\n" "- Object -> the center of the bounding box of a specific object" msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70 appPlugins/ToolTransform.py:639 msgid "The type of object used as reference." msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:145 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:159 msgid "" "Angle, in degrees.\n" "Float number between -360 and 359." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:21 msgid "Autocompleter Keywords" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:25 #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:35 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:26 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:25 msgid "Restore" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:26 msgid "Restore the autocompleter keywords list to the default state." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:27 #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:37 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:28 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:27 appPlugins/ToolDrilling.py:2982 #: appPlugins/ToolMilling.py:5035 msgid "Delete All" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:28 msgid "Delete all autocompleter keywords from the list." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:36 msgid "Keywords list" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:38 msgid "" "List of keywords used by\n" "the autocompleter in FlatCAM.\n" "The autocompleter is installed\n" "in the Code Editor and for the Tcl Shell." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:59 #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:68 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:59 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:57 msgid "Extension" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:60 msgid "A keyword to be added or deleted to the list." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:68 msgid "Add keyword" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:69 msgid "Add a keyword to the list" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:70 msgid "Delete keyword" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:71 msgid "Delete a keyword from the list" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:21 msgid "Excellon File associations" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:36 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:27 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:26 msgid "Restore the extension list to the default state." msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:38 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:29 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:28 msgid "Delete all extensions from the list." msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:46 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:37 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:36 msgid "Extensions list" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:48 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:39 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:38 msgid "" "List of file extensions to be\n" "associated with FlatCAM." msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:69 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:60 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:58 msgid "A file extension to be added or deleted to the list." msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:77 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:68 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:66 msgid "Add Extension" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:78 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:69 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:67 msgid "Add a file extension to the list" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:79 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:70 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:68 msgid "Delete Extension" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:80 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:71 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:69 msgid "Delete a file extension from the list" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:87 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:78 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:76 msgid "Apply Association" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:88 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:79 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:77 msgid "" "Apply the file associations between\n" "FlatCAM and the files with above extensions.\n" "They will be active after next logon.\n" "This work only in Windows." msgstr "" #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:22 msgid "GCode File associations" msgstr "" #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:21 msgid "Gerber File associations" msgstr "" #: appMain.py:955 msgid "The application is initializing ..." msgstr "" #: appMain.py:979 msgid "Could not find the Language files. The App strings are missing." msgstr "" #: appMain.py:1156 msgid "" "The application is initializing ...\n" "Canvas initialization started." msgstr "" #: appMain.py:1197 msgid "" "The application is initializing ...\n" "Canvas initialization started.\n" "Canvas initialization finished in" msgstr "" #: appMain.py:1351 appMain.py:10375 msgid "New Project - Not saved" msgstr "" #: appMain.py:1681 msgid "Found old default preferences files. Please reboot the application to update." msgstr "" #: appMain.py:1748 msgid "Open Config file failed." msgstr "" #: appMain.py:1763 msgid "Open Script file failed." msgstr "" #: appMain.py:1790 msgid "Open Excellon file failed." msgstr "" #: appMain.py:1803 msgid "Open GCode file failed." msgstr "" #: appMain.py:1816 msgid "Open Gerber file failed." msgstr "" #: appMain.py:2586 appMain.py:2602 appMain.py:2645 appMain.py:2661 appMain.py:2680 msgid "The Editor could not start." msgstr "" #: appMain.py:2586 appMain.py:5307 appMain.py:5788 appMain.py:6197 appMain.py:6281 #: appMain.py:6461 appMain.py:6770 appMain.py:6969 appMain.py:7015 appMain.py:7062 #: appMain.py:7117 appMain.py:7165 appMain.py:7323 appMain.py:9765 appMain.py:9862 #: appMain.py:9904 appMain.py:9946 appMain.py:9988 appMain.py:10029 appMain.py:10074 #: appMain.py:10119 appMain.py:10635 appPlugins/ToolDblSided.py:498 #: appPlugins/ToolDblSided.py:586 appPlugins/ToolExtract.py:408 #: appPlugins/ToolExtract.py:723 appPlugins/ToolExtract.py:826 appPlugins/ToolFilm.py:302 #: appPlugins/ToolFilm.py:309 appPlugins/ToolFilm.py:313 appPlugins/ToolMilling.py:2041 #: appPlugins/ToolMove.py:195 appPlugins/ToolPunchGerber.py:533 #: appPlugins/ToolPunchGerber.py:537 appPlugins/ToolReport.py:127 #: appPlugins/ToolTransform.py:167 appPlugins/ToolTransform.py:318 #: appPlugins/ToolTransform.py:350 appPlugins/ToolTransform.py:395 #: appPlugins/ToolTransform.py:429 appPlugins/ToolTransform.py:464 #: appPlugins/ToolTransform.py:501 camlib.py:2463 camlib.py:2536 camlib.py:2604 #: camlib.py:2679 msgid "No object is selected." msgstr "" #: appMain.py:2593 msgid "Select a Geometry, Gerber, Excellon or CNCJob Object to edit." msgstr "" #: appMain.py:2618 msgid "" "Simultaneous editing of tools geometry in a MultiGeo Geometry is not possible.\n" "Edit only one geometry at a time." msgstr "" #: appMain.py:2625 appPlugins/ToolDrilling.py:953 appPlugins/ToolDrilling.py:1233 #: appPlugins/ToolDrilling.py:1272 appPlugins/ToolIsolation.py:842 #: appPlugins/ToolIsolation.py:877 appPlugins/ToolMilling.py:1648 #: appPlugins/ToolMilling.py:1717 appPlugins/ToolNCC.py:534 appPlugins/ToolNCC.py:569 #: appPlugins/ToolPaint.py:493 appPlugins/ToolPaint.py:547 msgid "No Tool Selected" msgstr "" #: appMain.py:2720 msgid "EDITOR Area" msgstr "" #: appMain.py:2723 msgid "Editor is activated ..." msgstr "" #: appMain.py:2748 msgid "Do you want to save the changes?" msgstr "" #: appMain.py:2799 msgid "Object empty after edit." msgstr "" #: appMain.py:2804 appMain.py:2822 appMain.py:2853 appMain.py:2869 msgid "Editor exited. Editor content saved." msgstr "" #: appMain.py:2873 appMain.py:2925 msgid "Select a Gerber, Geometry, Excellon or CNCJob Object to update." msgstr "" #: appMain.py:2883 msgid "is updated, returning to App..." msgstr "" #: appMain.py:2900 msgid "Editor exited. Editor content was not saved." msgstr "" #: appMain.py:2950 msgid "Select a Gerber, Geometry, Excellon or CNCJob object to update." msgstr "" #: appMain.py:3093 appMain.py:3099 msgid "Save to file" msgstr "" #: appMain.py:3140 msgid "Exported file to" msgstr "" #: appMain.py:3177 msgid "Failed to open recent files file for writing." msgstr "" #: appMain.py:3188 msgid "Failed to open recent projects file for writing." msgstr "" #: appMain.py:3243 msgid "PCB Manufacturing files Viewer/Editor with Plugins" msgstr "" #: appMain.py:3244 msgid "Development" msgstr "" #: appMain.py:3245 msgid "DOWNLOAD" msgstr "" #: appMain.py:3246 msgid "Issue tracker" msgstr "" #: appMain.py:3250 appMain.py:3824 appMain.py:4007 msgid "Close" msgstr "" #: appMain.py:3265 msgid "Licensed under the MIT license" msgstr "" #: appMain.py:3274 msgid "" "Permission is hereby granted, free of charge, to any person obtaining a copy\n" "of this software and associated documentation files (the \"Software\"), to deal\n" "in the Software without restriction, including without limitation the rights\n" "to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n" "copies of the Software, and to permit persons to whom the Software is\n" "furnished to do so, subject to the following conditions:\n" "\n" "The above copyright notice and this permission notice shall be included in\n" "all copies or substantial portions of the Software.\n" "\n" "THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\n" "IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n" "FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n" "AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n" "LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\n" "OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n" "THE SOFTWARE." msgstr "" #: appMain.py:3296 msgid "" "Some of the icons used are from the following sources:
Icons by Freepik from www.flaticon.com
Icons " "by Icons8
Icons by oNline Web Fonts
Icons by Pixel perfect from www.flaticon.com
" msgstr "" #: appMain.py:3332 msgid "Splash" msgstr "" #: appMain.py:3338 msgid "Programmers" msgstr "" #: appMain.py:3344 msgid "Translators" msgstr "" #: appMain.py:3350 msgid "License" msgstr "" #: appMain.py:3356 msgid "Attributions" msgstr "" #: appMain.py:3601 msgid "Programmer" msgstr "" #: appMain.py:3602 msgid "Status" msgstr "" #: appMain.py:3603 appMain.py:3685 msgid "E-mail" msgstr "" #: appMain.py:3607 msgid "FlatCAM Author" msgstr "" #: appMain.py:3611 msgid "FlatCAM Evo Author/Maintainer" msgstr "" #: appMain.py:3683 msgid "Language" msgstr "" #: appMain.py:3684 msgid "Translator" msgstr "" #: appMain.py:3792 #, python-format msgid "This program is %s and free in a very wide meaning of the word." msgstr "" #: appMain.py:3793 msgid "Yet it cannot evolve without contributions." msgstr "" #: appMain.py:3794 msgid "If you want to see this application grow and become better and better" msgstr "" #: appMain.py:3795 msgid "you can contribute to the development yourself by:" msgstr "" #: appMain.py:3796 msgid "Pull Requests on the Bitbucket repository, if you are a developer" msgstr "" #: appMain.py:3798 msgid "Bug Reports by providing the steps required to reproduce the bug" msgstr "" #: appMain.py:3800 msgid "If you like what you have seen so far ..." msgstr "" #: appMain.py:3801 msgid "Donations are NOT required." msgstr "" #: appMain.py:3801 msgid "But they are welcomed" msgstr "" #: appMain.py:3832 msgid "Contribute" msgstr "" #: appMain.py:3853 msgid "Links Exchange" msgstr "" #: appMain.py:3866 appMain.py:3886 msgid "Soon ..." msgstr "" #: appMain.py:3873 msgid "How To's" msgstr "" #: appMain.py:3993 msgid "Alternative website" msgstr "" #: appMain.py:3994 msgid "" "This entry will resolve to another website if:\n" "\n" "1. FlatCAM.org website is down\n" "2. Someone forked FlatCAM project and wants to point\n" "to his own website\n" "\n" "If you can't get any informations about the application\n" "use the YouTube channel link from the Help menu." msgstr "" #: appMain.py:4028 appTranslation.py:217 msgid "" "There are files/objects modified.\n" "Do you want to Save the project?" msgstr "" #: appMain.py:4351 msgid "Selected Excellon file extensions registered with FlatCAM." msgstr "" #: appMain.py:4368 msgid "Selected GCode file extensions registered with FlatCAM." msgstr "" #: appMain.py:4384 msgid "Selected Gerber file extensions registered with FlatCAM." msgstr "" #: appMain.py:4572 appMain.py:4635 appMain.py:4666 msgid "At least two objects are required for join. Objects currently selected" msgstr "" #: appMain.py:4581 msgid "" "Failed join. The Geometry objects are of different types.\n" "At least one is MultiGeo type and the other is SingleGeo type. A possibility is to " "convert from one to another and retry joining \n" "but in the case of converting from MultiGeo to SingleGeo, informations may be lost and " "the result may not be what was expected. \n" "Check the generated GCODE." msgstr "" #: appMain.py:4596 appMain.py:4607 msgid "Geometry merging finished" msgstr "" #: appMain.py:4630 msgid "Failed. Excellon joining works only on Excellon objects." msgstr "" #: appMain.py:4643 msgid "Excellon merging finished" msgstr "" #: appMain.py:4661 msgid "Failed. Gerber joining works only on Gerber objects." msgstr "" #: appMain.py:4671 msgid "Gerber merging finished" msgstr "" #: appMain.py:4691 appMain.py:4727 msgid "Failed. Select a Geometry Object and try again." msgstr "" #: appMain.py:4695 appMain.py:4731 msgid "Expected a GeometryObject, got" msgstr "" #: appMain.py:4710 msgid "A Geometry object was converted to MultiGeo type." msgstr "" #: appMain.py:4748 msgid "A Geometry object was converted to SingleGeo type." msgstr "" #: appMain.py:4981 msgid "Units cannot be changed while the editor is active." msgstr "" #: appMain.py:4990 msgid "" "Changing the units of the project\n" "will scale all objects.\n" "\n" "Do you want to continue?" msgstr "" #: appMain.py:5044 msgid "Converted units to" msgstr "" #: appMain.py:5078 msgid "Workspace enabled." msgstr "" #: appMain.py:5081 msgid "Workspace disabled." msgstr "" #: appMain.py:5103 msgid "FlatCAM log opened." msgstr "" #: appMain.py:5152 appPlugins/ToolCutOut.py:428 appPlugins/ToolIsolation.py:1009 #: appPlugins/ToolIsolation.py:1331 appPlugins/ToolIsolation.py:1446 #: appPlugins/ToolMilling.py:2063 appPlugins/ToolMilling.py:2176 appPlugins/ToolNCC.py:1183 #: appPlugins/ToolNCC.py:1308 appPlugins/ToolNCC.py:1380 appPlugins/ToolPaint.py:661 #: appPlugins/ToolPaint.py:829 appPlugins/ToolPaint.py:962 appPlugins/ToolSolderPaste.py:373 #: appPlugins/ToolSolderPaste.py:559 msgid "Please enter a tool diameter with non-zero value, in Float format." msgstr "" #: appMain.py:5162 msgid "Tool adding ..." msgstr "" #: appMain.py:5163 msgid "" "Adding Tool works only when Advanced is checked.\n" "Go to Preferences -> General - Show Advanced Options." msgstr "" #: appMain.py:5253 msgid "Delete objects" msgstr "" #: appMain.py:5254 msgid "" "Are you sure you want to permanently delete\n" "the selected objects?" msgstr "" #: appMain.py:5309 msgid "Save the work in Editor and try again ..." msgstr "" #: appMain.py:5342 msgid "Object deleted" msgstr "" #: appMain.py:5355 msgid "Click to set the origin ..." msgstr "" #: appMain.py:5394 msgid "Setting Origin..." msgstr "" #: appMain.py:5415 appMain.py:5536 appMain.py:5648 msgid "Origin set" msgstr "" #: appMain.py:5435 msgid "Origin coordinates specified but incomplete." msgstr "" #: appMain.py:5482 msgid "Moving to Origin..." msgstr "" #: appMain.py:5486 appMain.py:5554 msgid "Failed. No object(s) selected..." msgstr "" #: appMain.py:5558 msgid "Quadrant 2" msgstr "" #: appMain.py:5559 msgid "Quadrant 1" msgstr "" #: appMain.py:5560 msgid "Quadrant 3" msgstr "" #: appMain.py:5561 msgid "Quadrant 4" msgstr "" #: appMain.py:5685 msgid "Jump to ..." msgstr "" #: appMain.py:5686 appMain.py:5946 msgid "Enter the coordinates in format X,Y:" msgstr "" #: appMain.py:5697 appMain.py:5956 msgid "Wrong coordinates. Enter coordinates in format: X,Y" msgstr "" #: appMain.py:5798 msgid "Locate ..." msgstr "" #: appMain.py:5945 msgid "Move to ..." msgstr "" #: appMain.py:6502 appMain.py:9413 msgid "Aborting." msgstr "" #: appMain.py:6502 msgid "The current task will be gracefully closed as soon as possible..." msgstr "" #: appMain.py:6509 msgid "The current task was gracefully closed on user request..." msgstr "" #: appMain.py:6712 msgid "Not available for Legacy 2D graphic mode." msgstr "" #: appMain.py:6781 appMain.py:6802 appPlugins/ToolCutOut.py:561 #: appPlugins/ToolIsolation.py:2978 appPlugins/ToolNCC.py:3916 appPlugins/ToolPaint.py:2792 msgid "Selected tool can't be used here. Pick another." msgstr "" #: appMain.py:6793 appMain.py:6812 appPlugins/ToolIsolation.py:2991 #: appPlugins/ToolNCC.py:3929 appPlugins/ToolPaint.py:2805 msgid "Tool from DB added in Tool Table." msgstr "" #: appMain.py:6814 msgid "Adding tool from DB is not allowed for this object." msgstr "" #: appMain.py:6832 msgid "Save Tools Database" msgstr "" #: appMain.py:6833 msgid "" "One or more Tools are edited.\n" "Do you want to save?" msgstr "" #: appMain.py:7065 appMain.py:7119 appMain.py:7167 msgid "Enter the Angle value:" msgstr "" #: appMain.py:7098 msgid "Rotation done." msgstr "" #: appMain.py:7100 msgid "Rotation movement was not executed." msgstr "" #: appMain.py:7149 msgid "Skew on X axis done." msgstr "" #: appMain.py:7197 msgid "Skew on Y axis done." msgstr "" #: appMain.py:7268 msgid "New Grid ..." msgstr "" #: appMain.py:7269 msgid "Enter a Grid Value:" msgstr "" #: appMain.py:7278 appMain.py:7303 msgid "Please enter a grid value with non-zero value, in Float format." msgstr "" #: appMain.py:7283 msgid "New Grid added" msgstr "" #: appMain.py:7285 msgid "Grid already exists" msgstr "" #: appMain.py:7287 msgid "Adding New Grid cancelled" msgstr "" #: appMain.py:7309 msgid "Grid Value does not exist" msgstr "" #: appMain.py:7311 msgid "Grid Value deleted" msgstr "" #: appMain.py:7313 msgid "Delete Grid value cancelled" msgstr "" #: appMain.py:7327 msgid "Name copied to clipboard ..." msgstr "" #: appMain.py:7883 appMain.py:7889 appMain.py:7895 appMain.py:7901 #: appObjects/ObjectCollection.py:991 appObjects/ObjectCollection.py:997 #: appObjects/ObjectCollection.py:1003 appObjects/ObjectCollection.py:1009 #: appObjects/ObjectCollection.py:1015 appObjects/ObjectCollection.py:1021 msgid "selected" msgstr "" #: appMain.py:8232 appMain.py:8236 msgid "Select an Gerber or Excellon file to view it's source file." msgstr "" #: appMain.py:8239 msgid "Viewing the source code of the selected object." msgstr "" #: appMain.py:8253 msgid "Source Editor" msgstr "" #: appMain.py:8289 appMain.py:8296 msgid "There is no selected object for which to see it's source file code." msgstr "" #: appMain.py:8305 msgid "Failed to load the source code for the selected object" msgstr "" #: appMain.py:8338 msgid "Go to Line ..." msgstr "" #: appMain.py:8339 msgid "Line" msgstr "" #: appMain.py:8373 msgid "Redrawing all objects" msgstr "" #: appMain.py:8470 msgid "Failed to load recent item list." msgstr "" #: appMain.py:8477 msgid "Failed to parse recent item list." msgstr "" #: appMain.py:8487 msgid "Failed to load recent projects item list." msgstr "" #: appMain.py:8494 msgid "Failed to parse recent project item list." msgstr "" #: appMain.py:8518 msgid "Recent files list was reset." msgstr "" #: appMain.py:8532 msgid "Recent projects list was reset." msgstr "" #: appMain.py:8557 msgid "Clear Recent projects" msgstr "" #: appMain.py:8581 msgid "Clear Recent files" msgstr "" #: appMain.py:8639 msgid "FlatCAM Evo" msgstr "" #: appMain.py:8643 msgid "Release date" msgstr "" #: appMain.py:8647 msgid "Displayed" msgstr "" #: appMain.py:8659 msgid "Canvas" msgstr "" #: appMain.py:8664 msgid "Workspace active" msgstr "" #: appMain.py:8668 msgid "Workspace size" msgstr "" #: appMain.py:8672 msgid "Workspace orientation" msgstr "" #: appMain.py:8734 msgid "Failed checking for latest version. Could not connect." msgstr "" #: appMain.py:8741 msgid "Could not parse information about latest version." msgstr "" #: appMain.py:8751 msgid "The application is up to date!" msgstr "" #: appMain.py:8755 msgid "Newer Version Available" msgstr "" #: appMain.py:8757 msgid "There is a newer version available for download:" msgstr "" #: appMain.py:8787 msgid "" "OpenGL canvas initialization failed. HW or HW configuration not supported.Change the " "graphic engine to Legacy(2D) in Edit -> Preferences -> General tab.\n" "\n" msgstr "" #: appMain.py:8878 msgid "All plots disabled." msgstr "" #: appMain.py:8884 msgid "All non selected plots disabled." msgstr "" #: appMain.py:8890 msgid "All plots enabled." msgstr "" #: appMain.py:8896 msgid "All non selected plots enabled." msgstr "" #: appMain.py:8904 msgid "Selected plots enabled..." msgstr "" #: appMain.py:8912 msgid "Selected plots disabled..." msgstr "" #: appMain.py:8954 msgid "Enabling plots ..." msgstr "" #: appMain.py:9007 msgid "Disabling plots ..." msgstr "" #: appMain.py:9175 msgid "Set alpha level ..." msgstr "" #: appMain.py:9574 appMain.py:9612 appMain.py:9655 appMain.py:9719 appMain.py:10498 #: appMain.py:11870 appMain.py:11938 msgid "" "Canvas initialization started.\n" "Canvas initialization finished in" msgstr "" #: appMain.py:9577 msgid "Opening Gerber file." msgstr "" #: appMain.py:9615 msgid "Opening Excellon file." msgstr "" #: appMain.py:9658 msgid "Opening G-Code file." msgstr "" #: appMain.py:9710 appMain.py:9714 msgid "Open HPGL2" msgstr "" #: appMain.py:9722 msgid "Opening HPGL2 file." msgstr "" #: appMain.py:9744 appMain.py:9747 msgid "Open Configuration File" msgstr "" #: appMain.py:9773 msgid "Only Geometry, Gerber and CNCJob objects can be used." msgstr "" #: appMain.py:9823 msgid "Data must be a 3D array with last dimension 3 or 4" msgstr "" #: appMain.py:9829 appMain.py:9834 msgid "Export PNG Image" msgstr "" #: appMain.py:9867 appMain.py:10079 msgid "Failed. Only Gerber objects can be saved as Gerber files..." msgstr "" #: appMain.py:9880 msgid "Save Gerber source file" msgstr "" #: appMain.py:9909 msgid "Failed. Only Script objects can be saved as TCL Script files..." msgstr "" #: appMain.py:9922 msgid "Save Script source file" msgstr "" #: appMain.py:9951 msgid "Failed. Only Document objects can be saved as Document files..." msgstr "" #: appMain.py:9964 msgid "Save Document source file" msgstr "" #: appMain.py:9993 appMain.py:10034 appMain.py:11023 msgid "Failed. Only Excellon objects can be saved as Excellon files..." msgstr "" #: appMain.py:10001 appMain.py:10006 msgid "Save Excellon source file" msgstr "" #: appMain.py:10124 msgid "Only Geometry objects can be used." msgstr "" #: appMain.py:10175 appMain.py:10179 msgid "Import SVG" msgstr "" #: appMain.py:10205 appMain.py:10209 msgid "Import DXF" msgstr "" #: appMain.py:10236 msgid "" "There are files/objects opened.\n" "Creating a New project will delete them.\n" "Do you want to Save the project?" msgstr "" #: appMain.py:10322 appMain.py:10350 appMain.py:10374 appMain.py:10395 msgid "seconds" msgstr "" #: appMain.py:10374 msgid "Project created in" msgstr "" #: appMain.py:10377 msgid "New Project created" msgstr "" #: appMain.py:10407 msgid "New TCL script file created in Code Editor." msgstr "" #: appMain.py:10434 appMain.py:10436 appMain.py:10471 appMain.py:10473 msgid "Open TCL script" msgstr "" #: appMain.py:10500 msgid "Executing ScriptObject file." msgstr "" #: appMain.py:10508 appMain.py:10512 msgid "Run TCL script" msgstr "" #: appMain.py:10535 msgid "TCL script file opened in Code Editor and executed." msgstr "" #: appMain.py:10583 appMain.py:10590 msgid "Save Project As ..." msgstr "" #: appMain.py:10627 msgid "General_print" msgstr "" #: appMain.py:10635 msgid "Print everything in the workspace." msgstr "" #: appMain.py:10641 appMain.py:10649 msgid "Save Object as PDF ..." msgstr "" #: appMain.py:10659 msgid "Printing PDF ..." msgstr "" #: appMain.py:10848 msgid "PDF file saved to" msgstr "" #: appMain.py:10870 appMain.py:11130 appMain.py:11264 appMain.py:11331 msgid "Exporting ..." msgstr "" #: appMain.py:10913 msgid "SVG file exported to" msgstr "" #: appMain.py:10928 appMain.py:10932 msgid "Import FlatCAM Preferences" msgstr "" #: appMain.py:10943 msgid "Imported Defaults from" msgstr "" #: appMain.py:10962 appMain.py:10968 msgid "Export FlatCAM Preferences" msgstr "" #: appMain.py:10988 msgid "Exported preferences to" msgstr "" #: appMain.py:11121 msgid "Excellon file exported to" msgstr "" #: appMain.py:11135 appMain.py:11142 appMain.py:11269 appMain.py:11276 appMain.py:11336 #: appMain.py:11343 msgid "Could not export." msgstr "" #: appMain.py:11256 msgid "Gerber file exported to" msgstr "" #: appMain.py:11322 msgid "DXF file exported to" msgstr "" #: appMain.py:11361 appMain.py:11417 appMain.py:11512 appMain.py:11551 appMain.py:11619 #: appMain.py:11836 appMain.py:11926 appPlugins/ToolImage.py:245 appPlugins/ToolPDF.py:96 msgid "File no longer available." msgstr "" #: appMain.py:11371 appMain.py:11427 msgid "Not supported type is picked as parameter. Only Geometry and Gerber are supported" msgstr "" #: appMain.py:11388 appMain.py:11445 appMain.py:11533 appMain.py:11602 appMain.py:11732 #: appMain.py:11797 appMain.py:11857 appPlugins/ToolImage.py:343 appPlugins/ToolPDF.py:212 msgid "Opened" msgstr "" #: appMain.py:11390 appMain.py:11447 appPlugins/ToolImage.py:328 #: appPlugins/ToolPcbWizard.py:362 tclCommands/TclCommandImportSvg.py:84 msgid "Importing" msgstr "" #: appMain.py:11398 appMain.py:11455 msgid "Import failed." msgstr "" #: appMain.py:11489 appMain.py:11756 appMain.py:11821 msgid "Failed to open file" msgstr "" #: appMain.py:11492 appMain.py:11759 appMain.py:11824 msgid "Failed to parse file" msgstr "" #: appMain.py:11504 msgid "Object is not Gerber file or empty. Aborting object creation." msgstr "" #: appMain.py:11515 appMain.py:11585 appMain.py:11709 appMain.py:11783 appMain.py:11839 #: tclCommands/TclCommandOpenDXF.py:90 msgid "Opening" msgstr "" #: appMain.py:11526 msgid "Open Gerber failed. Probable not a Gerber file." msgstr "" #: appMain.py:11561 appPlugins/ToolPcbWizard.py:335 msgid "This is not Excellon file." msgstr "" #: appMain.py:11564 msgid "Cannot open file" msgstr "" #: appMain.py:11582 appPlugins/ToolPDF.py:270 appPlugins/ToolPcbWizard.py:357 msgid "No geometry found in file" msgstr "" #: appMain.py:11595 msgid "Open Excellon file failed. Probable not an Excellon file." msgstr "" #: appMain.py:11631 msgid "Reading GCode file" msgstr "" #: appMain.py:11637 appPlugins/ToolPDF.py:194 msgid "Failed to open" msgstr "" #: appMain.py:11698 msgid "This is not GCODE" msgstr "" #: appMain.py:11722 msgid "" "Failed to create CNCJob Object. Probable not a GCode file. Try to load it from File " "menu.\n" " Attempting to create a FlatCAM CNCJob Object from G-Code file failed during processing" msgstr "" #: appMain.py:11778 msgid "Object is not HPGL2 file or empty. Aborting object creation." msgstr "" #: appMain.py:11790 msgid "Failed. Probable not a HPGL2 file." msgstr "" #: appMain.py:11816 msgid "TCL script file opened in Code Editor." msgstr "" #: appMain.py:11850 msgid "Failed to open TCL Script." msgstr "" #: appMain.py:11873 msgid "Opening FlatCAM Config file." msgstr "" #: appMain.py:11900 msgid "Failed to open config file" msgstr "" #: appMain.py:11935 msgid "Loading Project ... Please Wait ..." msgstr "" #: appMain.py:11941 msgid "Opening FlatCAM Project file." msgstr "" #: appMain.py:11946 msgid "Parsing..." msgstr "" #: appMain.py:11958 appMain.py:11962 appMain.py:11980 msgid "Failed to open project file" msgstr "" #: appMain.py:11996 msgid "Legacy Project" msgstr "" #: appMain.py:11997 msgid "" "The project was made with an older app version.\n" "It may not load correctly.\n" "\n" "Do you want to continue?" msgstr "" #: appMain.py:12035 msgid "Import Settings" msgstr "" #: appMain.py:12036 msgid "Do you want to import the loaded project settings?" msgstr "" #: appMain.py:12075 msgid "Loading..." msgstr "" #: appMain.py:12166 appMain.py:12173 msgid "Loading Project ... restoring" msgstr "" #: appMain.py:12181 msgid "Project loaded from" msgstr "" #: appMain.py:12215 msgid "Saving Project ..." msgstr "" #: appMain.py:12259 appMain.py:12315 msgid "Project saved to" msgstr "" #: appMain.py:12270 msgid "The object is used by another application." msgstr "" #: appMain.py:12290 msgid "Failed to verify project file" msgstr "" #: appMain.py:12290 appMain.py:12299 appMain.py:12307 appMain.py:12320 msgid "Retry to save it." msgstr "" #: appMain.py:12297 appMain.py:12305 appMain.py:12318 msgid "Failed to parse saved project file" msgstr "" #: appMain.py:12355 msgid "Save cancelled because source file is empty. Try to export the file." msgstr "" #: appObjects/AppObject.py:171 #, python-brace-format msgid "" "Object ({kind}) failed because: {error} \n" "\n" msgstr "" #: appObjects/AppObject.py:177 msgid "New object with name:" msgstr "" #: appObjects/AppObject.py:190 msgid "Converting units to " msgstr "" #: appObjects/AppObject.py:220 msgid "Gerber X2 drill file detected. Converted to Excellon object." msgstr "" #: appObjects/AppObject.py:264 appObjects/AppObject.py:270 appObjects/AppObject.py:276 #: appObjects/AppObject.py:282 appObjects/AppObject.py:288 appObjects/AppObject.py:294 msgid "created/selected" msgstr "" #: appObjects/AppObject.py:524 msgid "CREATE A NEW FLATCAM TCL SCRIPT" msgstr "" #: appObjects/AppObject.py:525 msgid "TCL Tutorial is here" msgstr "" #: appObjects/AppObject.py:527 msgid "FlatCAM commands list" msgstr "" #: appObjects/AppObject.py:528 msgid "" "Type >help< followed by Run Code for a list of FlatCAM Tcl Commands (displayed in Tcl " "Shell)." msgstr "" #: appObjects/AppObjectTemplate.py:347 msgid "Name changed from" msgstr "" #: appObjects/AppObjectTemplate.py:347 appObjects/ObjectCollection.py:567 msgid "to" msgstr "" #: appObjects/AppObjectTemplate.py:358 tclCommands/TclCommandSetOrigin.py:113 msgid "Offsetting..." msgstr "" #: appObjects/AppObjectTemplate.py:372 appObjects/AppObjectTemplate.py:377 msgid "Scaling could not be executed." msgstr "" #: appObjects/AppObjectTemplate.py:381 appObjects/AppObjectTemplate.py:389 msgid "Scale done." msgstr "" #: appObjects/AppObjectTemplate.py:387 msgid "Scaling..." msgstr "" #: appObjects/AppObjectTemplate.py:405 msgid "Skewing..." msgstr "" #: appObjects/AppObjectTemplate.py:544 appPlugins/ToolCalculators.py:691 #: appPlugins/ToolReport.py:168 msgid "Dimensions" msgstr "" #: appObjects/AppObjectTemplate.py:552 appPlugins/ToolReport.py:177 msgid "Tools" msgstr "" #: appObjects/AppObjectTemplate.py:567 msgid "Calculating dimensions ... Please wait." msgstr "" #: appObjects/AppObjectTemplate.py:741 appObjects/AppObjectTemplate.py:749 msgid "Polygons" msgstr "" #: appObjects/AppObjectTemplate.py:743 msgid "LineStrings" msgstr "" #: appObjects/AppObjectTemplate.py:748 msgid "Elements" msgstr "" #: appObjects/AppObjectTemplate.py:786 appObjects/AppObjectTemplate.py:857 #: appPlugins/ToolReport.py:435 appPlugins/ToolReport.py:509 msgid "Drills number" msgstr "" #: appObjects/AppObjectTemplate.py:787 appObjects/AppObjectTemplate.py:859 #: appPlugins/ToolReport.py:436 appPlugins/ToolReport.py:511 msgid "Slots number" msgstr "" #: appObjects/AppObjectTemplate.py:789 appPlugins/ToolReport.py:438 msgid "Drills total number:" msgstr "" #: appObjects/AppObjectTemplate.py:790 appPlugins/ToolReport.py:439 msgid "Slots total number:" msgstr "" #: appObjects/AppObjectTemplate.py:818 appObjects/AppObjectTemplate.py:821 #: appObjects/AppObjectTemplate.py:824 appObjects/AppObjectTemplate.py:854 #: appObjects/AppObjectTemplate.py:861 appObjects/AppObjectTemplate.py:864 #: appPlugins/ToolReport.py:470 appPlugins/ToolReport.py:473 appPlugins/ToolReport.py:476 #: appPlugins/ToolReport.py:506 appPlugins/ToolReport.py:513 appPlugins/ToolReport.py:516 msgid "Present" msgstr "" #: appObjects/AppObjectTemplate.py:819 appObjects/AppObjectTemplate.py:855 #: appPlugins/ToolReport.py:471 appPlugins/ToolReport.py:507 msgid "Solid Geometry" msgstr "" #: appObjects/AppObjectTemplate.py:822 appObjects/AppObjectTemplate.py:862 #: appPlugins/ToolReport.py:474 appPlugins/ToolReport.py:514 msgid "GCode Text" msgstr "" #: appObjects/AppObjectTemplate.py:825 appObjects/AppObjectTemplate.py:865 #: appPlugins/ToolReport.py:477 appPlugins/ToolReport.py:517 msgid "GCode Geometry" msgstr "" #: appObjects/AppObjectTemplate.py:833 appObjects/AppObjectTemplate.py:908 #: appPlugins/ToolReport.py:485 appPlugins/ToolReport.py:560 msgid "Tool Data" msgstr "" #: appObjects/AppObjectTemplate.py:872 appPlugins/ToolReport.py:524 msgid "Depth of Cut" msgstr "" #: appObjects/AppObjectTemplate.py:884 appPlugins/ToolReport.py:536 msgid "Clearance Height" msgstr "" #: appObjects/AppObjectTemplate.py:922 appPlugins/ToolReport.py:574 msgid "Routing time" msgstr "" #: appObjects/AppObjectTemplate.py:953 appObjects/AppObjectTemplate.py:961 #: appPlugins/ToolReport.py:605 appPlugins/ToolReport.py:613 msgid "Box Area" msgstr "" #: appObjects/AppObjectTemplate.py:956 appObjects/AppObjectTemplate.py:964 #: appPlugins/ToolReport.py:608 appPlugins/ToolReport.py:616 msgid "Convex_Hull Area" msgstr "" #: appObjects/AppObjectTemplate.py:971 appObjects/AppObjectTemplate.py:974 #: appPlugins/ToolReport.py:623 appPlugins/ToolReport.py:626 msgid "Copper Area" msgstr "" #: appObjects/CNCJobObject.py:732 appPlugins/ToolLevelling.py:1476 #: appPlugins/ToolLevelling.py:1668 appPlugins/ToolSolderPaste.py:1184 msgid "Export cancelled ..." msgstr "" #: appObjects/CNCJobObject.py:770 msgid "File saved to" msgstr "" #: appObjects/CNCJobObject.py:794 msgid "Code Review" msgstr "" #: appObjects/CNCJobObject.py:842 msgid "CNC Machine Code could not be updated" msgstr "" #: appObjects/CNCJobObject.py:846 msgid "CNC Machine Code was updated" msgstr "" #: appObjects/DocumentObject.py:171 msgid "Document Editor" msgstr "" #: appObjects/ExcellonObject.py:996 appObjects/ExcellonObject.py:1101 #: appPlugins/ToolDrilling.py:1973 appPlugins/ToolMilling.py:2537 #: appPlugins/ToolMilling.py:2642 msgid "Please select one or more tools from the list and try again." msgstr "" #: appObjects/ExcellonObject.py:1001 appPlugins/ToolMilling.py:2542 msgid "Milling tool for DRILLS is larger than hole size. Cancelled." msgstr "" #: appObjects/ExcellonObject.py:1002 appPlugins/ToolDrilling.py:908 #: appPlugins/ToolDrilling.py:1285 appPlugins/ToolDrilling.py:2493 #: appPlugins/ToolIsolation.py:902 appPlugins/ToolIsolation.py:3558 #: appPlugins/ToolMilling.py:1656 appPlugins/ToolMilling.py:1729 #: appPlugins/ToolMilling.py:2543 appPlugins/ToolMilling.py:4254 appPlugins/ToolNCC.py:592 #: appPlugins/ToolNCC.py:2483 appPlugins/ToolNCC.py:4273 appPlugins/ToolPaint.py:569 #: appPlugins/ToolPaint.py:3137 msgid "Tool" msgstr "" #: appObjects/ExcellonObject.py:1110 appPlugins/ToolMilling.py:2651 msgid "Milling tool for SLOTS is larger than hole size. Cancelled." msgstr "" #: appObjects/FlatCAMScript.py:157 msgid "Script Editor" msgstr "" #: appObjects/GeometryObject.py:513 msgid "Vertex points calculated." msgstr "" #: appObjects/GeometryObject.py:725 appObjects/GeometryObject.py:879 #: appPlugins/ToolMilling.py:3097 appPlugins/ToolMilling.py:3411 msgid "" "Tool Offset is selected in Tool Table but no value is provided.\n" "Add a Tool Offset or change the Offset Type." msgstr "" #: appObjects/GeometryObject.py:792 appObjects/GeometryObject.py:940 #: appPlugins/ToolMilling.py:3171 appPlugins/ToolMilling.py:3464 msgid "G-Code parsing in progress..." msgstr "" #: appObjects/GeometryObject.py:794 appObjects/GeometryObject.py:942 #: appPlugins/ToolMilling.py:3173 appPlugins/ToolMilling.py:3466 msgid "G-Code parsing finished..." msgstr "" #: appObjects/GeometryObject.py:801 appObjects/GeometryObject.py:951 #: appObjects/GeometryObject.py:1124 appPlugins/ToolMilling.py:3180 #: appPlugins/ToolMilling.py:3475 msgid "Finished G-Code processing" msgstr "" #: appObjects/GeometryObject.py:803 appObjects/GeometryObject.py:953 #: appPlugins/ToolMilling.py:3182 appPlugins/ToolMilling.py:3477 msgid "G-Code processing failed with error" msgstr "" #: appObjects/GeometryObject.py:846 appPlugins/ToolMilling.py:3225 msgid "Cancelled. Empty file, it has no geometry" msgstr "" #: appObjects/GeometryObject.py:969 appObjects/GeometryObject.py:974 #: appObjects/GeometryObject.py:1131 appPlugins/ToolMilling.py:3504 #: appPlugins/ToolMilling.py:3519 appPlugins/ToolSolderPaste.py:1079 msgid "CNCjob created" msgstr "" #: appObjects/GeometryObject.py:1157 appObjects/GeometryObject.py:1166 #: appParsers/ParseGerber.py:2112 appParsers/ParseGerber.py:2122 msgid "Scale factor has to be a number: integer or float." msgstr "" #: appObjects/GeometryObject.py:1246 appParsers/ParseGerber.py:2241 msgid "" "An (x,y) pair of values are needed. Probable you entered only one value in the Offset " "field." msgstr "" #: appObjects/GeometryObject.py:1337 msgid "" "The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y)\n" "but now there is only one value, not two." msgstr "" #: appObjects/GerberObject.py:420 appPlugins/ToolIsolation.py:1586 msgid "Buffering solid geometry" msgstr "" #: appObjects/GerberObject.py:465 appObjects/GerberObject.py:514 msgid "Operation could not be done." msgstr "" #: appObjects/GerberObject.py:613 appObjects/GerberObject.py:688 #: appPlugins/ToolIsolation.py:1827 appPlugins/ToolIsolation.py:2248 #: appPlugins/ToolNCC.py:2052 appPlugins/ToolNCC.py:3072 appPlugins/ToolNCC.py:3453 msgid "Isolation geometry could not be generated." msgstr "" #: appObjects/GerberObject.py:640 appObjects/GerberObject.py:731 #: appPlugins/ToolIsolation.py:1925 appPlugins/ToolIsolation.py:2141 #: appPlugins/ToolIsolation.py:2368 msgid "Isolation geometry created" msgstr "" #: appObjects/ObjectCollection.py:268 msgid "Script" msgstr "" #: appObjects/ObjectCollection.py:447 msgid "Batch Save" msgstr "" #: appObjects/ObjectCollection.py:567 msgid "Object renamed from" msgstr "" #: appObjects/ObjectCollection.py:1067 msgid "Cause of error" msgstr "" #: appObjects/ObjectCollection.py:1267 msgid "All objects are selected." msgstr "" #: appObjects/ObjectCollection.py:1277 msgid "Objects selection is cleared." msgstr "" #: appParsers/ParseExcellon.py:292 msgid "This is GCODE mark" msgstr "" #: appParsers/ParseExcellon.py:439 msgid "" "No tool diameter info's. See shell.\n" "A tool change event: T" msgstr "" #: appParsers/ParseExcellon.py:442 msgid "" "was found but the Excellon file have no informations regarding the tool diameters " "therefore the application will try to load it by using some 'fake' diameters.\n" "The user needs to edit the resulting Excellon object and change the diameters to reflect " "the real diameters." msgstr "" #: appParsers/ParseExcellon.py:979 msgid "" "Excellon Parser error.\n" "Parsing Failed. Line" msgstr "" #: appParsers/ParseFont.py:304 msgid "Font not supported, try another one." msgstr "" #: appParsers/ParseGerber.py:446 msgid "Gerber processing. Parsing" msgstr "" #: appParsers/ParseGerber.py:475 msgid "Gerber X2 format detected. Parsing may not be done correctly." msgstr "" #: appParsers/ParseGerber.py:479 msgid "Drill file Gerber X2 format detected. Parsing may not be done correctly." msgstr "" #: appParsers/ParseGerber.py:1171 appParsers/ParseGerber.py:1272 #: appParsers/ParseHPGL2.py:293 appParsers/ParseHPGL2.py:307 appParsers/ParseHPGL2.py:326 #: appParsers/ParseHPGL2.py:350 appParsers/ParseHPGL2.py:385 msgid "Coordinates missing, line ignored" msgstr "" #: appParsers/ParseGerber.py:1173 appParsers/ParseGerber.py:1274 msgid "GERBER file might be CORRUPT. Check the file !!!" msgstr "" #: appParsers/ParseGerber.py:1227 msgid "" "Region does not have enough points. File will be processed but there are parser errors. " "Line number" msgstr "" #: appParsers/ParseGerber.py:1664 appParsers/ParseHPGL2.py:420 msgid "Gerber processing. Joining polygons" msgstr "" #: appParsers/ParseGerber.py:1682 msgid "Gerber processing. Applying Gerber polarity." msgstr "" #: appParsers/ParseGerber.py:1740 msgid "Gerber Line" msgstr "" #: appParsers/ParseGerber.py:1740 msgid "Gerber Line Content" msgstr "" #: appParsers/ParseGerber.py:1741 msgid "Gerber Parser ERROR" msgstr "" #: appParsers/ParseGerber.py:2663 msgid "Gerber Buffer done." msgstr "" #: appParsers/ParseHPGL2.py:200 msgid "HPGL2 processing. Parsing" msgstr "" #: appParsers/ParseHPGL2.py:432 msgid "HPGL2 Line" msgstr "" #: appParsers/ParseHPGL2.py:432 msgid "HPGL2 Line Content" msgstr "" #: appParsers/ParseHPGL2.py:433 msgid "HPGL2 Parser ERROR" msgstr "" #: appPlugins/ToolAlignObjects.py:121 msgid "Align Tool" msgstr "" #: appPlugins/ToolAlignObjects.py:172 msgid "There is no aligned FlatCAM object selected..." msgstr "" #: appPlugins/ToolAlignObjects.py:182 msgid "There is no aligner FlatCAM object selected..." msgstr "" #: appPlugins/ToolAlignObjects.py:204 appPlugins/ToolAlignObjects.py:268 msgid "First Point" msgstr "" #: appPlugins/ToolAlignObjects.py:204 appPlugins/ToolAlignObjects.py:283 msgid "Click on the START point." msgstr "" #: appPlugins/ToolAlignObjects.py:263 appPlugins/ToolDblSided.py:480 #: appPlugins/ToolFiducials.py:826 appPlugins/ToolMarkers.py:1119 msgid "Cancelled by user request." msgstr "" #: appPlugins/ToolAlignObjects.py:268 appPlugins/ToolAlignObjects.py:290 #: appPlugins/ToolDistance.py:375 appPlugins/ToolMove.py:129 appPlugins/ToolQRCode.py:274 msgid "Click on the DESTINATION point ..." msgstr "" #: appPlugins/ToolAlignObjects.py:268 appPlugins/ToolAlignObjects.py:283 #: appPlugins/ToolAlignObjects.py:290 msgid "Or right click to cancel." msgstr "" #: appPlugins/ToolAlignObjects.py:283 appPlugins/ToolAlignObjects.py:290 #: appPlugins/ToolFiducials.py:1009 msgid "Second Point" msgstr "" #: appPlugins/ToolAlignObjects.py:417 msgid "MOVING object" msgstr "" #: appPlugins/ToolAlignObjects.py:419 msgid "" "Specify the type of object to be aligned.\n" "It can be of type: Gerber or Excellon.\n" "The selection here decide the type of objects that will be\n" "in the Object combobox." msgstr "" #: appPlugins/ToolAlignObjects.py:448 msgid "Object to be aligned." msgstr "" #: appPlugins/ToolAlignObjects.py:456 msgid "DESTINATION object" msgstr "" #: appPlugins/ToolAlignObjects.py:458 msgid "" "Specify the type of object to be aligned to.\n" "It can be of type: Gerber or Excellon.\n" "The selection here decide the type of objects that will be\n" "in the Object combobox." msgstr "" #: appPlugins/ToolAlignObjects.py:487 msgid "Object to be aligned to. Aligner." msgstr "" #: appPlugins/ToolAlignObjects.py:506 msgid "Alignment Type" msgstr "" #: appPlugins/ToolAlignObjects.py:508 msgid "" "The type of alignment can be:\n" "- Single Point -> it require a single point of sync, the action will be a translation\n" "- Dual Point -> it require two points of sync, the action will be translation followed by " "rotation" msgstr "" #: appPlugins/ToolAlignObjects.py:514 msgid "Single Point" msgstr "" #: appPlugins/ToolAlignObjects.py:515 msgid "Dual Point" msgstr "" #: appPlugins/ToolAlignObjects.py:524 msgid "Align Object" msgstr "" #: appPlugins/ToolAlignObjects.py:527 msgid "" "Align the specified object to the aligner object.\n" "If only one point is used then it assumes translation.\n" "If tho points are used it assume translation and rotation." msgstr "" #: appPlugins/ToolAlignObjects.py:542 appPlugins/ToolCalculators.py:1050 #: appPlugins/ToolCopperThieving.py:1772 appPlugins/ToolCutOut.py:2787 #: appPlugins/ToolDblSided.py:1146 appPlugins/ToolDrilling.py:3023 #: appPlugins/ToolEtchCompensation.py:499 appPlugins/ToolExtract.py:1446 #: appPlugins/ToolFiducials.py:1213 appPlugins/ToolFilm.py:1800 appPlugins/ToolFollow.py:771 #: appPlugins/ToolInvertGerber.py:307 appPlugins/ToolIsolation.py:4007 #: appPlugins/ToolLevelling.py:2335 appPlugins/ToolMarkers.py:1613 #: appPlugins/ToolMilling.py:5075 appPlugins/ToolNCC.py:4616 #: appPlugins/ToolObjectDistance.py:612 appPlugins/ToolOptimal.py:702 #: appPlugins/ToolPaint.py:3364 appPlugins/ToolPanelize.py:1432 #: appPlugins/ToolPunchGerber.py:2381 appPlugins/ToolQRCode.py:1018 #: appPlugins/ToolRulesCheck.py:1780 appPlugins/ToolSolderPaste.py:1761 #: appPlugins/ToolSub.py:966 appPlugins/ToolTransform.py:1018 msgid "Reset Tool" msgstr "" #: appPlugins/ToolAlignObjects.py:545 appPlugins/ToolCalculators.py:1053 #: appPlugins/ToolCopperThieving.py:1775 appPlugins/ToolCutOut.py:2790 #: appPlugins/ToolDblSided.py:1149 appPlugins/ToolDrilling.py:3026 #: appPlugins/ToolEtchCompensation.py:502 appPlugins/ToolExtract.py:1449 #: appPlugins/ToolFiducials.py:1216 appPlugins/ToolFilm.py:1803 appPlugins/ToolFollow.py:774 #: appPlugins/ToolInvertGerber.py:310 appPlugins/ToolIsolation.py:4010 #: appPlugins/ToolLevelling.py:2338 appPlugins/ToolMarkers.py:1616 #: appPlugins/ToolMilling.py:5078 appPlugins/ToolNCC.py:4619 #: appPlugins/ToolObjectDistance.py:615 appPlugins/ToolOptimal.py:705 #: appPlugins/ToolPaint.py:3367 appPlugins/ToolPanelize.py:1435 #: appPlugins/ToolPunchGerber.py:2384 appPlugins/ToolQRCode.py:1021 #: appPlugins/ToolRulesCheck.py:1783 appPlugins/ToolSolderPaste.py:1764 #: appPlugins/ToolSub.py:969 appPlugins/ToolTransform.py:1021 msgid "Will reset the tool parameters." msgstr "" #: appPlugins/ToolCalculators.py:207 msgid "Cut width (tool diameter) calculated." msgstr "" #: appPlugins/ToolCalculators.py:229 msgid "Tool diameter (cut width) cannot be smaller than the tip diameter." msgstr "" #: appPlugins/ToolCalculators.py:235 msgid "Cut depth (Cut Z) calculated." msgstr "" #: appPlugins/ToolCalculators.py:502 msgid "V-Shape Tool" msgstr "" #: appPlugins/ToolCalculators.py:503 msgid "Units Conversion" msgstr "" #: appPlugins/ToolCalculators.py:504 msgid "ElectroPlating" msgstr "" #: appPlugins/ToolCalculators.py:505 msgid "Tinning" msgstr "" #: appPlugins/ToolCalculators.py:550 appPlugins/ToolCalculators.py:565 #: appPlugins/ToolCalculators.py:580 msgid "Here you enter the value to be converted from imperial to metric" msgstr "" #: appPlugins/ToolCalculators.py:553 appPlugins/ToolCalculators.py:568 #: appPlugins/ToolCalculators.py:583 msgid "Here you enter the value to be converted from metric to imperial" msgstr "" #: appPlugins/ToolCalculators.py:559 msgid "oz" msgstr "" #: appPlugins/ToolCalculators.py:560 msgid "gram" msgstr "" #: appPlugins/ToolCalculators.py:574 msgid "fl oz" msgstr "" #: appPlugins/ToolCalculators.py:575 appPlugins/ToolCalculators.py:952 #: appPlugins/ToolCalculators.py:972 appPlugins/ToolCalculators.py:1027 msgid "mL" msgstr "" #: appPlugins/ToolCalculators.py:622 msgid "" "This is the angle of the tip of the tool.\n" "It is specified by manufacturer." msgstr "" #: appPlugins/ToolCalculators.py:634 msgid "This is the depth to cut into the material." msgstr "" #: appPlugins/ToolCalculators.py:645 msgid "" "This is the actual tool diameter\n" "at the desired depth of cut." msgstr "" #: appPlugins/ToolCalculators.py:658 msgid "Calculate either the depth of cut or the effective tool diameter." msgstr "" #: appPlugins/ToolCalculators.py:683 msgid "Area Calculation" msgstr "" #: appPlugins/ToolCalculators.py:688 msgid "Determine the board area." msgstr "" #: appPlugins/ToolCalculators.py:699 msgid "Board Length." msgstr "" #: appPlugins/ToolCalculators.py:706 appPlugins/ToolCalculators.py:725 #: appPlugins/ToolCalculators.py:744 appPlugins/ToolCopperThieving.py:1724 msgid "cm" msgstr "" #: appPlugins/ToolCalculators.py:737 msgid "Board area." msgstr "" #: appPlugins/ToolCalculators.py:761 msgid "" "Current density applied to the board. \n" "In Amperes per Square Feet ASF." msgstr "" #: appPlugins/ToolCalculators.py:782 msgid "Thickness of the deposited copper." msgstr "" #: appPlugins/ToolCalculators.py:790 msgid "um" msgstr "" #: appPlugins/ToolCalculators.py:806 msgid "Output" msgstr "" #: appPlugins/ToolCalculators.py:810 msgid "Current Value" msgstr "" #: appPlugins/ToolCalculators.py:811 msgid "" "This is the current intensity value\n" "to be set on the Power Supply." msgstr "" #: appPlugins/ToolCalculators.py:832 msgid "Time" msgstr "" #: appPlugins/ToolCalculators.py:833 msgid "The time calculated to deposit copper." msgstr "" #: appPlugins/ToolCalculators.py:858 msgid "" "Calculator for chemical quantities\n" "required for tinning PCB's." msgstr "" #: appPlugins/ToolCalculators.py:870 msgid "Solution" msgstr "" #: appPlugins/ToolCalculators.py:872 msgid "Choose one solution for tinning." msgstr "" #: appPlugins/ToolCalculators.py:884 msgid "Stannous Chloride." msgstr "" #: appPlugins/ToolCalculators.py:892 appPlugins/ToolCalculators.py:912 #: appPlugins/ToolCalculators.py:932 appPlugins/ToolCalculators.py:1003 msgid "g" msgstr "" #: appPlugins/ToolCalculators.py:903 appPlugins/ToolCalculators.py:904 msgid "Thiourea" msgstr "" #: appPlugins/ToolCalculators.py:924 msgid "Sulfamic Acid." msgstr "" #: appPlugins/ToolCalculators.py:944 msgid "Distilled Water." msgstr "" #: appPlugins/ToolCalculators.py:963 msgid "Soap" msgstr "" #: appPlugins/ToolCalculators.py:964 msgid "Liquid soap." msgstr "" #: appPlugins/ToolCalculators.py:987 msgid "Optional" msgstr "" #: appPlugins/ToolCalculators.py:993 msgid "" "Sodium hypophosphite.\n" "Optional, for solution stability.\n" "Warning: List 1 chemical in USA." msgstr "" #: appPlugins/ToolCalculators.py:1019 msgid "Volume" msgstr "" #: appPlugins/ToolCalculators.py:1020 msgid "Desired volume of tinning solution." msgstr "" #: appPlugins/ToolCalculators.py:1041 msgid "Calculate the chemical quantities for the desired volume of tinning solution." msgstr "" #: appPlugins/ToolCopperThieving.py:216 appPlugins/ToolCopperThieving.py:242 msgid "Lines Grid works only for 'itself' reference ..." msgstr "" #: appPlugins/ToolCopperThieving.py:227 msgid "Solid fill selected." msgstr "" #: appPlugins/ToolCopperThieving.py:232 msgid "Dots grid fill selected." msgstr "" #: appPlugins/ToolCopperThieving.py:237 msgid "Squares grid fill selected." msgstr "" #: appPlugins/ToolCopperThieving.py:260 appPlugins/ToolCopperThieving.py:358 #: appPlugins/ToolCopperThieving.py:972 appPlugins/ToolFiducials.py:300 #: appPlugins/ToolFiducials.py:615 appPlugins/ToolMarkers.py:356 #: appPlugins/ToolMarkers.py:391 appPlugins/ToolMarkers.py:422 appPlugins/ToolMarkers.py:484 #: appPlugins/ToolMarkers.py:819 appPlugins/ToolMarkers.py:928 #: appPlugins/ToolMarkers.py:1040 appPlugins/ToolOptimal.py:209 appPlugins/ToolQRCode.py:226 msgid "There is no Gerber object loaded ..." msgstr "" #: appPlugins/ToolCopperThieving.py:273 appPlugins/ToolCopperThieving.py:872 msgid "Append geometry" msgstr "" #: appPlugins/ToolCopperThieving.py:328 appPlugins/ToolCopperThieving.py:923 #: appPlugins/ToolCopperThieving.py:1131 msgid "Append source file" msgstr "" #: appPlugins/ToolCopperThieving.py:341 appPlugins/ToolCopperThieving.py:936 msgid "Copper Thieving Tool done." msgstr "" #: appPlugins/ToolCopperThieving.py:368 appPlugins/ToolCopperThieving.py:388 #: appPlugins/ToolCutOut.py:642 appPlugins/ToolCutOut.py:1023 appPlugins/ToolCutOut.py:1411 #: appPlugins/ToolCutOut.py:1503 appPlugins/ToolCutOut.py:1547 appPlugins/ToolCutOut.py:1650 #: appPlugins/ToolDrilling.py:923 appPlugins/ToolDrilling.py:1938 #: appPlugins/ToolEtchCompensation.py:181 appPlugins/ToolFollow.py:194 #: appPlugins/ToolFollow.py:244 appPlugins/ToolInvertGerber.py:130 #: appPlugins/ToolIsolation.py:1162 appPlugins/ToolIsolation.py:1226 #: appPlugins/ToolIsolation.py:1594 appPlugins/ToolIsolation.py:1623 #: appPlugins/ToolIsolation.py:2604 appPlugins/ToolLevelling.py:325 #: appPlugins/ToolMilling.py:655 appPlugins/ToolMilling.py:872 #: appPlugins/ToolMilling.py:1358 appPlugins/ToolMilling.py:1702 #: appPlugins/ToolMilling.py:1786 appPlugins/ToolMilling.py:2715 #: appPlugins/ToolMilling.py:2738 appPlugins/ToolMilling.py:2903 appPlugins/ToolNCC.py:999 #: appPlugins/ToolNCC.py:1068 appPlugins/ToolNCC.py:1513 appPlugins/ToolNCC.py:1563 #: appPlugins/ToolNCC.py:1598 appPlugins/ToolPaint.py:1134 appPlugins/ToolPaint.py:1223 #: appPlugins/ToolPanelize.py:304 appPlugins/ToolPanelize.py:318 appPlugins/ToolSub.py:273 #: appPlugins/ToolSub.py:292 appPlugins/ToolSub.py:506 appPlugins/ToolSub.py:519 #: tclCommands/TclCommandBuffer.py:87 tclCommands/TclCommandCopperClear.py:97 #: tclCommands/TclCommandCopperClear.py:252 tclCommands/TclCommandPaint.py:100 #: tclCommands/TclCommandPaint.py:273 tclCommands/TclCommandScale.py:110 #: tclCommands/TclCommandSkew.py:164 msgid "Could not retrieve object" msgstr "" #: appPlugins/ToolCopperThieving.py:416 msgid "Click the end point of the filling area." msgstr "" #: appPlugins/ToolCopperThieving.py:543 msgid "Copper Thieving Tool started. Reading parameters." msgstr "" #: appPlugins/ToolCopperThieving.py:569 msgid "Copper Thieving Tool. Preparing isolation polygons." msgstr "" #: appPlugins/ToolCopperThieving.py:615 msgid "Copper Thieving Tool. Preparing areas to fill with copper." msgstr "" #: appPlugins/ToolCopperThieving.py:659 msgid "Geometry not supported for" msgstr "" #: appPlugins/ToolCopperThieving.py:665 appPlugins/ToolNCC.py:1884 #: appPlugins/ToolNCC.py:1932 appPlugins/ToolNCC.py:2934 appPlugins/ToolPaint.py:2625 msgid "No object available." msgstr "" #: appPlugins/ToolCopperThieving.py:698 appPlugins/ToolNCC.py:1902 #: appPlugins/ToolNCC.py:1955 appPlugins/ToolNCC.py:2967 msgid "The reference object type is not supported." msgstr "" #: appPlugins/ToolCopperThieving.py:703 msgid "Copper Thieving Tool. Appending new geometry and buffering." msgstr "" #: appPlugins/ToolCopperThieving.py:739 msgid "Create geometry" msgstr "" #: appPlugins/ToolCopperThieving.py:947 appPlugins/ToolCopperThieving.py:951 msgid "P-Plating Mask" msgstr "" #: appPlugins/ToolCopperThieving.py:975 msgid "Append PP-M geometry" msgstr "" #: appPlugins/ToolCopperThieving.py:1151 msgid "Generating Pattern Plating Mask done." msgstr "" #: appPlugins/ToolCopperThieving.py:1194 msgid "Copper Thieving Tool exit." msgstr "" #: appPlugins/ToolCopperThieving.py:1280 appPlugins/ToolCopperThieving.py:1666 #: appPlugins/ToolCutOut.py:2258 appPlugins/ToolDblSided.py:723 #: appPlugins/ToolDrilling.py:2403 appPlugins/ToolEtchCompensation.py:316 #: appPlugins/ToolExtract.py:1014 appPlugins/ToolFiducials.py:940 #: appPlugins/ToolFilm.py:1270 appPlugins/ToolFollow.py:698 #: appPlugins/ToolInvertGerber.py:223 appPlugins/ToolIsolation.py:3394 #: appPlugins/ToolLevelling.py:1762 appPlugins/ToolMarkers.py:1263 #: appPlugins/ToolMilling.py:3950 appPlugins/ToolNCC.py:4064 appPlugins/ToolOptimal.py:484 #: appPlugins/ToolPaint.py:2949 appPlugins/ToolPanelize.py:1163 #: appPlugins/ToolPunchGerber.py:2030 appPlugins/ToolQRCode.py:761 #: appPlugins/ToolSolderPaste.py:1264 msgid "Source Object" msgstr "" #: appPlugins/ToolCopperThieving.py:1281 msgid "Gerber Object to which will be added a copper thieving." msgstr "" #: appPlugins/ToolCopperThieving.py:1312 msgid "" "This set the distance between the copper thieving components\n" "(the polygon fill may be split in multiple polygons)\n" "and the copper traces in the Gerber file." msgstr "" #: appPlugins/ToolCopperThieving.py:1376 msgid "" "The type of FlatCAM object to be used as copper thieving reference.\n" "It can be Gerber, Excellon or Geometry." msgstr "" #: appPlugins/ToolCopperThieving.py:1576 msgid "Insert Copper thieving" msgstr "" #: appPlugins/ToolCopperThieving.py:1579 msgid "" "Will add a polygon (may be split in multiple parts)\n" "that will surround the actual Gerber traces at a certain distance." msgstr "" #: appPlugins/ToolCopperThieving.py:1641 msgid "Insert Robber Bar" msgstr "" #: appPlugins/ToolCopperThieving.py:1644 msgid "" "Will add a polygon with a defined thickness\n" "that will surround the actual Gerber object\n" "at a certain distance.\n" "Required when doing holes pattern plating." msgstr "" #: appPlugins/ToolCopperThieving.py:1668 msgid "" "Gerber Object with the soldermask.\n" "It will be used as a base for\n" "the pattern plating mask." msgstr "" #: appPlugins/ToolCopperThieving.py:1711 msgid "Plated area" msgstr "" #: appPlugins/ToolCopperThieving.py:1713 msgid "" "The area to be plated by pattern plating.\n" "Basically is made from the openings in the plating mask.\n" "\n" "<> - the calculated area is actually a bit larger\n" "due of the fact that the soldermask openings are by design\n" "a bit larger than the copper pads, and this area is\n" "calculated from the soldermask openings." msgstr "" #: appPlugins/ToolCopperThieving.py:1754 msgid "Generate pattern plating mask" msgstr "" #: appPlugins/ToolCopperThieving.py:1757 msgid "" "Will add to the soldermask gerber geometry\n" "the geometries of the copper thieving and/or\n" "the robber bar if those were generated." msgstr "" #: appPlugins/ToolCutOut.py:411 appPlugins/ToolCutOut.py:2597 msgid "Any" msgstr "" #: appPlugins/ToolCutOut.py:441 appPlugins/ToolDrilling.py:1140 #: appPlugins/ToolIsolation.py:1349 appPlugins/ToolMilling.py:2075 msgid "Could not load Tools DB file." msgstr "" #: appPlugins/ToolCutOut.py:495 appPlugins/ToolIsolation.py:1401 #: appPlugins/ToolMilling.py:2129 appPlugins/ToolNCC.py:1257 appPlugins/ToolPaint.py:908 msgid "Tool not in Tools Database. Adding a default tool." msgstr "" #: appPlugins/ToolCutOut.py:502 appPlugins/ToolDrilling.py:1205 #: appPlugins/ToolIsolation.py:1407 appPlugins/ToolMilling.py:2137 #: appPlugins/ToolNCC.py:1264 appPlugins/ToolPaint.py:916 msgid "" "Cancelled.\n" "Multiple tools for one tool diameter found in Tools Database." msgstr "" #: appPlugins/ToolCutOut.py:521 msgid "Updated tool from Tools Database." msgstr "" #: appPlugins/ToolCutOut.py:547 msgid "Default tool added." msgstr "" #: appPlugins/ToolCutOut.py:583 msgid "Tool updated from Tools Database." msgstr "" #: appPlugins/ToolCutOut.py:647 appPlugins/ToolCutOut.py:1416 msgid "" "There is no object selected for Cutout.\n" "Select one and try again." msgstr "" #: appPlugins/ToolCutOut.py:653 appPlugins/ToolCutOut.py:1033 appPlugins/ToolCutOut.py:1519 #: tclCommands/TclCommandGeoCutout.py:181 msgid "Tool Diameter is zero value. Change it to a positive real number." msgstr "" #: appPlugins/ToolCutOut.py:666 appPlugins/ToolCutOut.py:1047 msgid "Number of gaps value is missing. Add it and retry." msgstr "" #: appPlugins/ToolCutOut.py:671 appPlugins/ToolCutOut.py:1051 msgid "" "Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8.\n" "Fill in a correct value and retry." msgstr "" #: appPlugins/ToolCutOut.py:899 appPlugins/ToolCutOut.py:1305 appPlugins/ToolCutOut.py:1871 msgid "Mouse bites failed." msgstr "" #: appPlugins/ToolCutOut.py:909 tclCommands/TclCommandGeoCutout.py:295 msgid "Any-form Cutout operation finished." msgstr "" #: appPlugins/ToolCutOut.py:1027 appPlugins/ToolDrilling.py:1942 #: appPlugins/ToolEtchCompensation.py:187 appPlugins/ToolFollow.py:198 #: appPlugins/ToolFollow.py:248 appPlugins/ToolInvertGerber.py:136 #: appPlugins/ToolIsolation.py:1166 appPlugins/ToolIsolation.py:1230 #: appPlugins/ToolIsolation.py:1598 appPlugins/ToolIsolation.py:1627 #: appPlugins/ToolIsolation.py:2608 appPlugins/ToolMilling.py:2719 #: appPlugins/ToolMilling.py:2742 appPlugins/ToolMilling.py:2907 appPlugins/ToolNCC.py:1003 #: appPlugins/ToolNCC.py:1072 appPlugins/ToolNCC.py:1517 appPlugins/ToolPaint.py:1138 #: appPlugins/ToolPanelize.py:309 tclCommands/TclCommandBbox.py:71 #: tclCommands/TclCommandNregions.py:71 msgid "Object not found" msgstr "" #: appPlugins/ToolCutOut.py:1153 appPlugins/ToolCutOut.py:1227 msgid "Rectangular cutout with negative margin is not possible." msgstr "" #: appPlugins/ToolCutOut.py:1314 msgid "Rectangular CutOut operation finished." msgstr "" #: appPlugins/ToolCutOut.py:1429 appPlugins/ToolCutOut.py:1447 appPlugins/ToolCutOut.py:1461 msgid "Could not add drills." msgstr "" #: appPlugins/ToolCutOut.py:1508 appPlugins/ToolCutOut.py:1578 msgid "Geometry object for manual cutout not found" msgstr "" #: appPlugins/ToolCutOut.py:1511 msgid "Click on the selected geometry object perimeter to create a bridge gap ..." msgstr "" #: appPlugins/ToolCutOut.py:1617 msgid "No tool in the Geometry object." msgstr "" #: appPlugins/ToolCutOut.py:1638 msgid "Added manual Bridge Gap. Left click to add another or right click to finish." msgstr "" #: appPlugins/ToolCutOut.py:1655 msgid "" "There is no Gerber object selected for Cutout.\n" "Select one and try again." msgstr "" #: appPlugins/ToolCutOut.py:1661 msgid "" "The selected object has to be of Gerber type.\n" "Select a Gerber file and try again." msgstr "" #: appPlugins/ToolCutOut.py:1707 msgid "Geometry not supported" msgstr "" #: appPlugins/ToolCutOut.py:1784 msgid "Making manual bridge gap..." msgstr "" #: appPlugins/ToolCutOut.py:1876 msgid "Finished manual adding of gaps." msgstr "" #: appPlugins/ToolCutOut.py:2240 msgid "" "Create a Geometry object with toolpaths\n" "for cutting out the object from the surrounding material." msgstr "" #: appPlugins/ToolCutOut.py:2259 msgid "Object to be cutout" msgstr "" #: appPlugins/ToolCutOut.py:2295 msgid "" "Specify the type of object to be cutout.\n" "It can be of type: Gerber or Geometry.\n" "What is selected here will dictate the kind\n" "of objects that will populate the 'Object' combobox." msgstr "" #: appPlugins/ToolCutOut.py:2312 msgid "Cutout Tool" msgstr "" #: appPlugins/ToolCutOut.py:2341 appPlugins/ToolIsolation.py:202 #: appPlugins/ToolIsolation.py:3520 appPlugins/ToolMilling.py:4214 #: appPlugins/ToolNCC.py:4236 appPlugins/ToolPaint.py:3100 msgid "Search and Add" msgstr "" #: appPlugins/ToolCutOut.py:2344 appPlugins/ToolIsolation.py:3523 #: appPlugins/ToolMilling.py:4217 appPlugins/ToolNCC.py:4239 appPlugins/ToolPaint.py:3103 msgid "" "Add a new tool to the Tool Table\n" "with the diameter specified above.\n" "This is done by a background search\n" "in the Tools Database. If nothing is found\n" "in the Tools DB then a default tool is added." msgstr "" #: appPlugins/ToolCutOut.py:2353 appPlugins/ToolIsolation.py:207 #: appPlugins/ToolIsolation.py:3532 appPlugins/ToolMilling.py:399 #: appPlugins/ToolMilling.py:4226 appPlugins/ToolNCC.py:4248 appPlugins/ToolPaint.py:3112 msgid "Pick from DB" msgstr "" #: appPlugins/ToolCutOut.py:2356 appPlugins/ToolIsolation.py:3535 #: appPlugins/ToolMilling.py:4229 appPlugins/ToolNCC.py:4251 appPlugins/ToolPaint.py:3115 msgid "" "Add a new tool to the Tool Table\n" "from the Tools Database.\n" "Tools database administration in in:\n" "Menu: Options -> Tools Database" msgstr "" #: appPlugins/ToolCutOut.py:2549 msgid "Selection of the type of cutout." msgstr "" #: appPlugins/ToolCutOut.py:2553 appPlugins/ToolPunchGerber.py:2339 msgid "Automatic" msgstr "" #: appPlugins/ToolCutOut.py:2594 msgid "" "Checked: the cutout shape is rectangular.\n" "Unchecked: any-form cutout shape." msgstr "" #: appPlugins/ToolCutOut.py:2634 msgid "Manual cutout Geometry" msgstr "" #: appPlugins/ToolCutOut.py:2636 appPlugins/ToolCutOut.py:2714 msgid "Geometry object used to create the manual cutout." msgstr "" #: appPlugins/ToolCutOut.py:2651 msgid "Manual Geometry" msgstr "" #: appPlugins/ToolCutOut.py:2654 msgid "Generate a Geometry to be used as cutout." msgstr "" #: appPlugins/ToolCutOut.py:2669 msgid "" "Add new gaps on the selected Geometry object\n" "by clicking mouse left button on the Geometry outline." msgstr "" #: appPlugins/ToolCutOut.py:2679 msgid "Generate the cutout geometry." msgstr "" #: appPlugins/ToolDblSided.py:292 msgid "'Point' reference is selected and 'Point' coordinates are missing." msgstr "" #: appPlugins/ToolDblSided.py:301 msgid "Box reference object is missing." msgstr "" #: appPlugins/ToolDblSided.py:309 msgid "Not supported." msgstr "" #: appPlugins/ToolDblSided.py:315 msgid "Drill diameter is missing." msgstr "" #: appPlugins/ToolDblSided.py:322 msgid "Alignment drill coordinates are missing." msgstr "" #: appPlugins/ToolDblSided.py:357 msgid "Alignment Drills" msgstr "" #: appPlugins/ToolDblSided.py:361 msgid "Excellon object with alignment drills created..." msgstr "" #: appPlugins/ToolDblSided.py:372 appPlugins/ToolPunchGerber.py:564 #: appPlugins/ToolPunchGerber.py:602 appPlugins/ToolPunchGerber.py:707 msgid "There is no Excellon object loaded ..." msgstr "" #: appPlugins/ToolDblSided.py:388 msgid "Click on canvas within the desired Excellon drill hole" msgstr "" #: appPlugins/ToolDblSided.py:432 msgid "Mirror reference point set." msgstr "" #: appPlugins/ToolDblSided.py:502 msgid "Only Gerber, Excellon and Geometry objects can be mirrored." msgstr "" #: appPlugins/ToolDblSided.py:514 msgid "There is no Box object loaded ..." msgstr "" #: appPlugins/ToolDblSided.py:524 msgid "There are no Point coordinates in the Point field. Add coords and try again ..." msgstr "" #: appPlugins/ToolDblSided.py:531 camlib.py:2461 msgid "Object was mirrored" msgstr "" #: appPlugins/ToolDblSided.py:701 appPlugins/ToolNCC.py:4042 msgid "" "Create a Geometry object with\n" "toolpaths to cover the space outside the copper pattern." msgstr "" #: appPlugins/ToolDblSided.py:724 msgid "Objects to be mirrored" msgstr "" #: appPlugins/ToolDblSided.py:737 msgid "Select the type of application object to be processed in this tool." msgstr "" #: appPlugins/ToolDblSided.py:756 msgid "Bounds Values" msgstr "" #: appPlugins/ToolDblSided.py:758 msgid "" "Select on canvas the object(s)\n" "for which to calculate bounds values." msgstr "" #: appPlugins/ToolDblSided.py:774 msgid "X min" msgstr "" #: appPlugins/ToolDblSided.py:776 appPlugins/ToolDblSided.py:790 msgid "Minimum location." msgstr "" #: appPlugins/ToolDblSided.py:788 msgid "Y min" msgstr "" #: appPlugins/ToolDblSided.py:802 msgid "X max" msgstr "" #: appPlugins/ToolDblSided.py:804 appPlugins/ToolDblSided.py:818 msgid "Maximum location." msgstr "" #: appPlugins/ToolDblSided.py:816 msgid "Y max" msgstr "" #: appPlugins/ToolDblSided.py:827 msgid "Center point coordinates" msgstr "" #: appPlugins/ToolDblSided.py:829 msgid "Centroid" msgstr "" #: appPlugins/ToolDblSided.py:831 msgid "" "The center point location for the rectangular\n" "bounding shape. Centroid. Format is (x, y)." msgstr "" #: appPlugins/ToolDblSided.py:840 msgid "Calculate Bounds Values" msgstr "" #: appPlugins/ToolDblSided.py:842 msgid "" "Calculate the enveloping rectangular shape coordinates,\n" "for the selection of objects.\n" "The envelope shape is parallel with the X, Y axis." msgstr "" #: appPlugins/ToolDblSided.py:858 msgid "Parameters for the mirror operation" msgstr "" #: appPlugins/ToolDblSided.py:921 msgid "Point coordinates" msgstr "" #: appPlugins/ToolDblSided.py:933 msgid "" "Add the coordinates in format (x, y) through which the mirroring axis\n" " selected in 'MIRROR AXIS' pass.\n" "The (x, y) coordinates are captured by pressing SHIFT key\n" "and left mouse button click on canvas or you can enter the coordinates manually." msgstr "" #: appPlugins/ToolDblSided.py:958 msgid "" "It can be of type: Gerber or Excellon or Geometry.\n" "The coordinates of the center of the bounding box are used\n" "as reference for mirror operation." msgstr "" #: appPlugins/ToolDblSided.py:985 msgid "Object that holds holes that can be picked as reference for mirroring." msgstr "" #: appPlugins/ToolDblSided.py:997 msgid "Pick hole" msgstr "" #: appPlugins/ToolDblSided.py:999 msgid "" "Click inside a drill hole that belong to the selected Excellon object,\n" "and the hole center coordinates will be copied to the Point field." msgstr "" #: appPlugins/ToolDblSided.py:1011 msgid "" "Mirrors (flips) the specified object around \n" "the specified axis. Does not create a new \n" "object, but modifies it." msgstr "" #: appPlugins/ToolDblSided.py:1029 appPlugins/ToolDblSided.py:1131 msgid "" "Creates an Excellon Object containing the\n" "specified alignment holes and their mirror\n" "images." msgstr "" #: appPlugins/ToolDblSided.py:1080 appPlugins/ToolDblSided.py:1087 msgid "" "The reference point used to create the second alignment drill\n" "from the first alignment drill, by doing mirror.\n" "It can be modified in the Mirror Parameters -> Reference section" msgstr "" #: appPlugins/ToolDblSided.py:1097 msgid "Drill Coordinates" msgstr "" #: appPlugins/ToolDblSided.py:1099 msgid "" "Alignment holes (x1, y1), (x2, y2), ... \n" "If the type is X or Y then for each pair of coordinates\n" "two drill points will be added: one with the given coordinates,\n" "and the other will be mirrored as set in the 'Mirror' section.\n" "If the type is 'Manual' then no mirror point is generated.\n" "\n" "Shift + mouse click will add one set of coordinates.\n" "Ctrl + Shift + mouse click will accumulate sets of coordinates. " msgstr "" #: appPlugins/ToolDblSided.py:1112 msgid "Drill coordinates" msgstr "" #: appPlugins/ToolDblSided.py:1117 msgid "Delete the last coordinates tuple in the list." msgstr "" #: appPlugins/ToolDblSided.py:1128 appPlugins/ToolMarkers.py:1522 #: appPlugins/ToolMarkers.py:1542 msgid "Create Excellon Object" msgstr "" #: appPlugins/ToolDistance.py:256 msgid "MEASURING: Click on the Start point ..." msgstr "" #: appPlugins/ToolDistance.py:346 appPlugins/ToolDistance.py:980 #: appPlugins/ToolObjectDistance.py:600 msgid "Measure" msgstr "" #: appPlugins/ToolDistance.py:418 msgid "Click to add next point or right click to finish." msgstr "" #: appPlugins/ToolDistance.py:465 msgid "Pads overlapped. Aborting." msgstr "" #: appPlugins/ToolDistance.py:834 msgid "Snap to center" msgstr "" #: appPlugins/ToolDistance.py:836 msgid "" "Mouse cursor will snap to the center of the pad/drill\n" "when it is hovering over the geometry of the pad/drill." msgstr "" #: appPlugins/ToolDistance.py:841 msgid "Multi-Point" msgstr "" #: appPlugins/ToolDistance.py:843 msgid "Make a measurement over multiple distance segments." msgstr "" #: appPlugins/ToolDistance.py:850 appPlugins/ToolFiducials.py:1175 #: appPlugins/ToolMarkers.py:1464 msgid "Use a big cursor." msgstr "" #: appPlugins/ToolDistance.py:871 appPlugins/ToolObjectDistance.py:491 msgid "Start point" msgstr "" #: appPlugins/ToolDistance.py:872 appPlugins/ToolDistance.py:877 #: appPlugins/ToolObjectDistance.py:492 appPlugins/ToolObjectDistance.py:497 msgid "This is measuring Start point coordinates." msgstr "" #: appPlugins/ToolDistance.py:884 appPlugins/ToolObjectDistance.py:504 msgid "End point" msgstr "" #: appPlugins/ToolDistance.py:885 appPlugins/ToolDistance.py:890 #: appPlugins/ToolObjectDistance.py:505 appPlugins/ToolObjectDistance.py:510 msgid "This is the measuring Stop point coordinates." msgstr "" #: appPlugins/ToolDistance.py:899 appPlugins/ToolObjectDistance.py:519 msgid "Results" msgstr "" #: appPlugins/ToolDistance.py:909 appPlugins/ToolObjectDistance.py:529 msgid "Dx" msgstr "" #: appPlugins/ToolDistance.py:910 appPlugins/ToolDistance.py:915 #: appPlugins/ToolObjectDistance.py:530 appPlugins/ToolObjectDistance.py:535 msgid "This is the distance measured over the X axis." msgstr "" #: appPlugins/ToolDistance.py:922 appPlugins/ToolObjectDistance.py:542 msgid "Dy" msgstr "" #: appPlugins/ToolDistance.py:923 appPlugins/ToolDistance.py:928 #: appPlugins/ToolObjectDistance.py:543 appPlugins/ToolObjectDistance.py:548 msgid "This is the distance measured over the Y axis." msgstr "" #: appPlugins/ToolDistance.py:936 appPlugins/ToolDistance.py:941 #: appPlugins/ToolDistance.py:949 appPlugins/ToolDistance.py:954 #: appPlugins/ToolObjectDistance.py:556 appPlugins/ToolObjectDistance.py:561 msgid "This is orientation angle of the measuring line." msgstr "" #: appPlugins/ToolDistance.py:966 appPlugins/ToolObjectDistance.py:573 msgid "DISTANCE" msgstr "" #: appPlugins/ToolDistance.py:967 appPlugins/ToolDistance.py:973 #: appPlugins/ToolObjectDistance.py:574 appPlugins/ToolObjectDistance.py:580 msgid "This is the point to point Euclidian distance." msgstr "" #: appPlugins/ToolDrilling.py:287 appPlugins/ToolMilling.py:413 msgid "coords" msgstr "" #: appPlugins/ToolDrilling.py:902 appPlugins/ToolDrilling.py:908 #: appPlugins/ToolDrilling.py:953 appPlugins/ToolDrilling.py:1233 #: appPlugins/ToolDrilling.py:1240 appPlugins/ToolDrilling.py:1272 #: appPlugins/ToolDrilling.py:1285 appPlugins/ToolDrilling.py:1289 #: appPlugins/ToolDrilling.py:2493 appPlugins/ToolIsolation.py:648 #: appPlugins/ToolIsolation.py:842 appPlugins/ToolIsolation.py:847 #: appPlugins/ToolIsolation.py:877 appPlugins/ToolIsolation.py:902 #: appPlugins/ToolIsolation.py:915 appPlugins/ToolIsolation.py:3558 #: appPlugins/ToolMilling.py:968 appPlugins/ToolMilling.py:1087 #: appPlugins/ToolMilling.py:1648 appPlugins/ToolMilling.py:1656 #: appPlugins/ToolMilling.py:1660 appPlugins/ToolMilling.py:1717 #: appPlugins/ToolMilling.py:1729 appPlugins/ToolMilling.py:1733 #: appPlugins/ToolMilling.py:4254 appPlugins/ToolNCC.py:534 appPlugins/ToolNCC.py:539 #: appPlugins/ToolNCC.py:569 appPlugins/ToolNCC.py:592 appPlugins/ToolNCC.py:605 #: appPlugins/ToolNCC.py:821 appPlugins/ToolNCC.py:4273 appPlugins/ToolPaint.py:493 #: appPlugins/ToolPaint.py:498 appPlugins/ToolPaint.py:547 appPlugins/ToolPaint.py:569 #: appPlugins/ToolPaint.py:581 appPlugins/ToolPaint.py:798 appPlugins/ToolPaint.py:3137 msgid "Parameters for" msgstr "" #: appPlugins/ToolDrilling.py:902 appPlugins/ToolDrilling.py:1240 #: appPlugins/ToolDrilling.py:1289 appPlugins/ToolIsolation.py:648 #: appPlugins/ToolIsolation.py:847 appPlugins/ToolIsolation.py:915 #: appPlugins/ToolMilling.py:968 appPlugins/ToolMilling.py:1087 #: appPlugins/ToolMilling.py:1660 appPlugins/ToolMilling.py:1733 appPlugins/ToolNCC.py:539 #: appPlugins/ToolNCC.py:605 appPlugins/ToolNCC.py:821 appPlugins/ToolPaint.py:498 #: appPlugins/ToolPaint.py:581 appPlugins/ToolPaint.py:798 msgid "Multiple Tools" msgstr "" #: appPlugins/ToolDrilling.py:1451 appPlugins/ToolIsolation.py:983 #: appPlugins/ToolMilling.py:2030 appPlugins/ToolNCC.py:712 appPlugins/ToolPaint.py:646 msgid "Current Tool parameters were applied to all tools." msgstr "" #: appPlugins/ToolDrilling.py:1513 appPlugins/ToolMilling.py:3555 msgid "Focus Z" msgstr "" #: appPlugins/ToolDrilling.py:1535 appPlugins/ToolMilling.py:3577 msgid "Laser Power" msgstr "" #: appPlugins/ToolDrilling.py:1537 appPlugins/ToolMilling.py:3579 msgid "The laser power when the laser is cutting." msgstr "" #: appPlugins/ToolDrilling.py:1656 appPlugins/ToolMilling.py:3742 msgid "Delete failed. There are no exclusion areas to delete." msgstr "" #: appPlugins/ToolDrilling.py:1673 appPlugins/ToolMilling.py:3759 msgid "Delete failed. Nothing is selected." msgstr "" #: appPlugins/ToolDrilling.py:1690 appPlugins/ToolMilling.py:3776 msgid "Only one selected row is allowed." msgstr "" #: appPlugins/ToolDrilling.py:1791 appPlugins/ToolDrilling.py:1806 #: appPlugins/ToolMilling.py:3877 appPlugins/ToolMilling.py:3892 msgid "Value edited in Exclusion Table." msgstr "" #: appPlugins/ToolDrilling.py:1960 camlib.py:4289 msgid "The loaded Excellon file has no drills" msgstr "" #: appPlugins/ToolDrilling.py:2006 camlib.py:4209 msgid "Creating a list of points to drill..." msgstr "" #: appPlugins/ToolDrilling.py:2013 msgid "Drill points inside the exclusion zones." msgstr "" #: appPlugins/ToolDrilling.py:2029 camlib.py:4279 camlib.py:5727 camlib.py:6166 msgid "Starting G-Code" msgstr "" #: appPlugins/ToolDrilling.py:2034 msgid "Generating CNCJob..." msgstr "" #: appPlugins/ToolDrilling.py:2185 camlib.py:3362 camlib.py:3848 camlib.py:6023 msgid "The Toolchange X,Y format has to be (x, y)." msgstr "" #: appPlugins/ToolDrilling.py:2336 msgid "Generating CNC Code" msgstr "" #: appPlugins/ToolDrilling.py:2405 appPlugins/ToolFilm.py:1272 msgid "Excellon object for drilling/milling operation." msgstr "" #: appPlugins/ToolDrilling.py:2433 msgid "Tools in the object used for drilling." msgstr "" #: appPlugins/ToolDrilling.py:2480 msgid "Search DB" msgstr "" #: appPlugins/ToolDrilling.py:2483 msgid "" "Will search and try to replace the tools from Tools Table\n" "with tools from DB that have a close diameter value." msgstr "" #: appPlugins/ToolDrilling.py:2496 appPlugins/ToolIsolation.py:3561 #: appPlugins/ToolMilling.py:4257 appPlugins/ToolNCC.py:4275 appPlugins/ToolPaint.py:3140 msgid "" "The data used for creating GCode.\n" "Each tool store it's own set of such data." msgstr "" #: appPlugins/ToolDrilling.py:2735 appPlugins/ToolIsolation.py:3761 #: appPlugins/ToolMilling.py:4754 appPlugins/ToolNCC.py:4435 appPlugins/ToolPaint.py:3234 msgid "Apply parameters to all tools" msgstr "" #: appPlugins/ToolDrilling.py:2738 appPlugins/ToolIsolation.py:3764 #: appPlugins/ToolMilling.py:4757 appPlugins/ToolNCC.py:4438 appPlugins/ToolPaint.py:3237 msgid "" "The parameters in the current form will be applied\n" "on all the tools from the Tool Table." msgstr "" #: appPlugins/ToolDrilling.py:2760 appPlugins/ToolMilling.py:4779 msgid "Tool change Z" msgstr "" #: appPlugins/ToolDrilling.py:2836 appPlugins/ToolMilling.py:4842 msgid "X,Y coordinates" msgstr "" #: appPlugins/ToolDrilling.py:2882 msgid "" "The preprocessor JSON file that dictates\n" "Gcode output for Excellon Objects." msgstr "" #: appPlugins/ToolDrilling.py:2897 appPlugins/ToolMilling.py:4949 msgid "Add exclusion areas" msgstr "" #: appPlugins/ToolDrilling.py:2924 appPlugins/ToolMilling.py:4977 msgid "This is the Area ID." msgstr "" #: appPlugins/ToolDrilling.py:2926 appPlugins/ToolMilling.py:4979 msgid "Type of the object where the exclusion area was added." msgstr "" #: appPlugins/ToolDrilling.py:2928 appPlugins/ToolMilling.py:4981 msgid "The strategy used for exclusion area. Go around the exclusion areas or over it." msgstr "" #: appPlugins/ToolDrilling.py:2930 appPlugins/ToolMilling.py:4983 msgid "" "If the strategy is to go over the area then this is the height at which the tool will go " "to avoid the exclusion area." msgstr "" #: appPlugins/ToolDrilling.py:2964 appPlugins/ToolMilling.py:5017 msgid "Add Area:" msgstr "" #: appPlugins/ToolDrilling.py:2965 appPlugins/ToolMilling.py:5018 msgid "Add an Exclusion Area." msgstr "" #: appPlugins/ToolDrilling.py:2983 appPlugins/ToolMilling.py:5036 msgid "Delete all exclusion areas." msgstr "" #: appPlugins/ToolDrilling.py:2986 appPlugins/ToolMilling.py:5039 msgid "Delete Selected" msgstr "" #: appPlugins/ToolDrilling.py:2987 appPlugins/ToolMilling.py:5040 msgid "Delete all exclusion areas that are selected in the table." msgstr "" #: appPlugins/ToolDrilling.py:3003 appPlugins/ToolMilling.py:5055 msgid "Generate CNCJob object" msgstr "" #: appPlugins/ToolDrilling.py:3006 appPlugins/ToolMilling.py:5058 msgid "" "Generate the CNC Job.\n" "If milling then an additional Geometry object will be created.\n" "Add / Select at least one tool in the tool-table.\n" "Click the # header to select all, or Ctrl + LMB\n" "for custom selection of tools." msgstr "" #: appPlugins/ToolEtchCompensation.py:90 appPlugins/ToolEtchCompensation.py:288 msgid "Etch Compensation" msgstr "" #: appPlugins/ToolEtchCompensation.py:193 appPlugins/ToolEtchCompensation.py:207 msgid "Missing parameter value." msgstr "" #: appPlugins/ToolEtchCompensation.py:318 msgid "Gerber object that will be compensated." msgstr "" #: appPlugins/ToolEtchCompensation.py:335 msgid "Conversion utilities" msgstr "" #: appPlugins/ToolEtchCompensation.py:346 msgid "Oz to Microns" msgstr "" #: appPlugins/ToolEtchCompensation.py:348 msgid "" "Will convert from oz thickness to microns [um].\n" "Can use formulas with operators: /, *, +, -, %, .\n" "The real numbers use the dot decimals separator." msgstr "" #: appPlugins/ToolEtchCompensation.py:357 msgid "Oz value" msgstr "" #: appPlugins/ToolEtchCompensation.py:359 appPlugins/ToolEtchCompensation.py:381 msgid "Microns value" msgstr "" #: appPlugins/ToolEtchCompensation.py:368 msgid "Mils to Microns" msgstr "" #: appPlugins/ToolEtchCompensation.py:370 msgid "" "Will convert from mils to microns [um].\n" "Can use formulas with operators: /, *, +, -, %, .\n" "The real numbers use the dot decimals separator." msgstr "" #: appPlugins/ToolEtchCompensation.py:379 msgid "Mils value" msgstr "" #: appPlugins/ToolEtchCompensation.py:403 msgid "Copper Thickness" msgstr "" #: appPlugins/ToolEtchCompensation.py:405 msgid "" "The thickness of the copper foil.\n" "In microns [um]." msgstr "" #: appPlugins/ToolEtchCompensation.py:415 appPlugins/ToolImage.py:832 msgid "Ratio" msgstr "" #: appPlugins/ToolEtchCompensation.py:417 msgid "" "The ratio of lateral etch versus depth etch.\n" "Can be:\n" "- custom -> the user will enter a custom value\n" "- preselection -> value which depends on a selection of etchants" msgstr "" #: appPlugins/ToolEtchCompensation.py:423 appPlugins/ToolEtchCompensation.py:448 msgid "Etch Factor" msgstr "" #: appPlugins/ToolEtchCompensation.py:424 msgid "Etchants list" msgstr "" #: appPlugins/ToolEtchCompensation.py:425 msgid "Manual offset" msgstr "" #: appPlugins/ToolEtchCompensation.py:437 msgid "Etchants" msgstr "" #: appPlugins/ToolEtchCompensation.py:439 msgid "A list of etchants." msgstr "" #: appPlugins/ToolEtchCompensation.py:442 msgid "Alkaline baths" msgstr "" #: appPlugins/ToolEtchCompensation.py:450 msgid "" "The ratio between depth etch and lateral etch .\n" "Accepts real numbers and formulas using the operators: /,*,+,-,%" msgstr "" #: appPlugins/ToolEtchCompensation.py:454 msgid "Real number or formula" msgstr "" #: appPlugins/ToolEtchCompensation.py:462 msgid "" "Value with which to increase or decrease (buffer)\n" "the copper features. In microns [um]." msgstr "" #: appPlugins/ToolEtchCompensation.py:483 msgid "Compensate" msgstr "" #: appPlugins/ToolEtchCompensation.py:486 msgid "Will increase the copper features thickness to compensate the lateral etch." msgstr "" #: appPlugins/ToolExtract.py:410 msgid "extracted" msgstr "" #: appPlugins/ToolExtract.py:488 appPlugins/ToolExtract.py:593 appPlugins/ToolExtract.py:693 msgid "No drills extracted. Try different parameters." msgstr "" #: appPlugins/ToolExtract.py:790 msgid "No soldermask extracted." msgstr "" #: appPlugins/ToolExtract.py:839 appPlugins/ToolExtract.py:848 appPlugins/ToolExtract.py:852 msgid "No cutout extracted." msgstr "" #: appPlugins/ToolExtract.py:1015 msgid "Gerber object from which to extract drill holes or soldermask." msgstr "" #: appPlugins/ToolExtract.py:1057 appPlugins/ToolPunchGerber.py:2071 msgid "Process all Pads." msgstr "" #: appPlugins/ToolExtract.py:1135 appPlugins/ToolExtract.py:1323 msgid "Extract Drills" msgstr "" #: appPlugins/ToolExtract.py:1137 msgid "Extract an Excellon object from the Gerber pads." msgstr "" #: appPlugins/ToolExtract.py:1326 msgid "Extract drills from a given Gerber file." msgstr "" #: appPlugins/ToolFiducials.py:357 msgid "Click to add first Fiducial. Bottom Left..." msgstr "" #: appPlugins/ToolFiducials.py:665 msgid "Click to add the last fiducial. Top Right..." msgstr "" #: appPlugins/ToolFiducials.py:670 msgid "Click to add the second fiducial. Top Left or Bottom Right..." msgstr "" #: appPlugins/ToolFiducials.py:829 msgid "Fiducials Tool exit." msgstr "" #: appPlugins/ToolFiducials.py:942 msgid "Gerber object for adding fiducials and soldermask openings." msgstr "" #: appPlugins/ToolFiducials.py:959 msgid "" "A table with the fiducial points coordinates,\n" "in the format (x, y)." msgstr "" #: appPlugins/ToolFiducials.py:997 appPlugins/ToolMarkers.py:1416 msgid "Top Right" msgstr "" #: appPlugins/ToolFiducials.py:1131 msgid "Thickness of the line that makes the fiducial." msgstr "" #: appPlugins/ToolFiducials.py:1164 msgid "Mode:" msgstr "" #: appPlugins/ToolFiducials.py:1181 msgid "Add Fiducial" msgstr "" #: appPlugins/ToolFiducials.py:1184 msgid "Will add a polygon on the copper layer to serve as fiducial." msgstr "" #: appPlugins/ToolFiducials.py:1195 msgid "Add Soldermask Opening" msgstr "" #: appPlugins/ToolFiducials.py:1197 msgid "" "Will add a polygon on the soldermask layer\n" "to serve as fiducial opening.\n" "The diameter is always double of the diameter\n" "for the copper fiducial." msgstr "" #: appPlugins/ToolFilm.py:302 msgid "Load an object for Film and retry." msgstr "" #: appPlugins/ToolFilm.py:309 msgid "Load an object for Box and retry." msgstr "" #: appPlugins/ToolFilm.py:324 msgid "Generating Film ..." msgstr "" #: appPlugins/ToolFilm.py:387 appPlugins/ToolFilm.py:392 msgid "Export positive film" msgstr "" #: appPlugins/ToolFilm.py:424 msgid "No Excellon object selected. Load an object for punching reference and retry." msgstr "" #: appPlugins/ToolFilm.py:448 appPlugins/ToolFilm.py:460 appPlugins/ToolPunchGerber.py:826 #: appPlugins/ToolPunchGerber.py:959 msgid "Failed. Punch hole size is bigger than some of the apertures in the Gerber object." msgstr "" #: appPlugins/ToolFilm.py:478 appPlugins/ToolPunchGerber.py:899 #: appPlugins/ToolPunchGerber.py:994 msgid "" "Failed. The new object geometry is the same as the one in the source object geometry..." msgstr "" #: appPlugins/ToolFilm.py:550 appPlugins/ToolFilm.py:555 msgid "Export negative film" msgstr "" #: appPlugins/ToolFilm.py:632 appPlugins/ToolFilm.py:854 appPlugins/ToolPanelize.py:322 msgid "No object Box. Using instead" msgstr "" #: appPlugins/ToolFilm.py:688 appPlugins/ToolFilm.py:911 msgid "Film file exported to" msgstr "" #: appPlugins/ToolFilm.py:1020 msgid "" "The artwork has to be within the selected page size in order to be visible.\n" "For 'Bounds' page size, it needs to be in the first quadrant." msgstr "" #: appPlugins/ToolFilm.py:1288 msgid "" "Specify the type of object for which to create the film.\n" "The object can be of type: Gerber or Geometry.\n" "The selection here decide the type of objects that will be\n" "in the Film Object combobox." msgstr "" #: appPlugins/ToolFilm.py:1311 msgid "" "Specify the type of object to be used as an container for\n" "film creation. It can be: Gerber or Geometry type.The selection here decide the type of " "objects that will be\n" "in the Box Object combobox." msgstr "" #: appPlugins/ToolFilm.py:1429 msgid "" "'Length' -> deform by a length value\n" "'Angle' -> deform by an angle\n" "'Ratio' -> deform by a ratio between what should be and what is" msgstr "" #: appPlugins/ToolFilm.py:1599 msgid "Punch drill holes" msgstr "" #: appPlugins/ToolFilm.py:1600 msgid "" "When checked the generated film will have holes in pads when\n" "the generated film is positive. This is done to help drilling,\n" "when done manually." msgstr "" #: appPlugins/ToolFilm.py:1616 msgid "Source" msgstr "" #: appPlugins/ToolFilm.py:1618 msgid "" "The punch hole source can be:\n" "- Excellon -> an Excellon holes center will serve as reference.\n" "- Pad Center -> will try to use the pads center as reference." msgstr "" #: appPlugins/ToolFilm.py:1623 msgid "Pad center" msgstr "" #: appPlugins/ToolFilm.py:1630 msgid "Remove the geometry of Excellon from the Film to create the holes in pads." msgstr "" #: appPlugins/ToolFilm.py:1641 msgid "Punch Size" msgstr "" #: appPlugins/ToolFilm.py:1642 msgid "The value here will control how big is the punch hole in the pads." msgstr "" #: appPlugins/ToolFilm.py:1781 msgid "Save Film" msgstr "" #: appPlugins/ToolFilm.py:1784 msgid "" "Create a Film for the selected object, within\n" "the specified box. Does not create a new \n" " FlatCAM object, but directly save it in the\n" "selected format." msgstr "" #: appPlugins/ToolFilm.py:1864 msgid "" "Using the Pad center does not work on Geometry objects. Only a Gerber object has pads." msgstr "" #: appPlugins/ToolFollow.py:320 appPlugins/ToolFollow.py:388 msgid "Failed to create Follow Geometry." msgstr "" #: appPlugins/ToolFollow.py:677 msgid "" "Create a Geometry object with\n" "toolpaths to cut through the middle of polygons." msgstr "" #: appPlugins/ToolFollow.py:700 msgid "" "A Gerber object to be followed.\n" "Create a Geometry object with a path\n" "following the Gerber traces." msgstr "" #: appPlugins/ToolFollow.py:729 msgid "" "Selection of area to be processed.\n" "- 'All Polygons' - the process will start after click.\n" "- 'Area Selection' - left mouse click to start selection of the area to be processed." msgstr "" #: appPlugins/ToolImage.py:91 appPlugins/ToolImage.py:511 msgid "Image Import" msgstr "" #: appPlugins/ToolImage.py:161 msgid "Import warning" msgstr "" #: appPlugins/ToolImage.py:162 msgid "" "The tracing require Chromium,\n" "but it was not detected.\n" "\n" "Do you want to download it (about 300MB)?" msgstr "" #: appPlugins/ToolImage.py:182 msgid "" "Please be patient. Chromium is being downloaded in the background.\n" "The app will resume after it is installed." msgstr "" #: appPlugins/ToolImage.py:191 appPlugins/ToolImage.py:194 msgid "Import IMAGE" msgstr "" #: appPlugins/ToolImage.py:257 msgid "Only Geometry and Gerber objects are supported" msgstr "" #: appPlugins/ToolImage.py:542 appPlugins/ToolReport.py:192 msgid "Object Type" msgstr "" #: appPlugins/ToolImage.py:544 msgid "" "Specify the type of object to create from the image.\n" "It can be of type: Gerber or Geometry." msgstr "" #: appPlugins/ToolImage.py:560 msgid "DPI value" msgstr "" #: appPlugins/ToolImage.py:561 msgid "Specify a DPI value for the image." msgstr "" #: appPlugins/ToolImage.py:566 msgid "Area:" msgstr "" #: appPlugins/ToolImage.py:568 msgid "Polygons inside the image with less area are discarded." msgstr "" #: appPlugins/ToolImage.py:584 appPlugins/ToolImage.py:602 msgid "" "Choose a method for the image interpretation.\n" "B/W means a black & white image. Color means a colored image." msgstr "" #: appPlugins/ToolImage.py:622 msgid "Level of detail" msgstr "" #: appPlugins/ToolImage.py:629 appPlugins/ToolImage.py:645 appPlugins/ToolImage.py:659 #: appPlugins/ToolImage.py:673 msgid "Mask value" msgstr "" #: appPlugins/ToolImage.py:631 msgid "" "Mask for monochrome image.\n" "Takes values between [0 ... 255].\n" "Decides the level of details to include\n" "in the resulting geometry.\n" "0 means no detail and 255 means everything \n" "(which is totally black)." msgstr "" #: appPlugins/ToolImage.py:647 msgid "" "Mask for RED color.\n" "Takes values between [0 ... 255].\n" "Decides the level of details to include\n" "in the resulting geometry." msgstr "" #: appPlugins/ToolImage.py:661 msgid "" "Mask for GREEN color.\n" "Takes values between [0 ... 255].\n" "Decides the level of details to include\n" "in the resulting geometry." msgstr "" #: appPlugins/ToolImage.py:675 msgid "" "Mask for BLUE color.\n" "Takes values between [0 ... 255].\n" "Decides the level of details to include\n" "in the resulting geometry." msgstr "" #: appPlugins/ToolImage.py:694 appPlugins/ToolLevelling.py:1125 #: appPlugins/ToolLevelling.py:1147 appPlugins/ToolLevelling.py:2010 #: appPlugins/ToolLevelling.py:2025 msgid "Control" msgstr "" #: appPlugins/ToolImage.py:696 msgid "Tracing control." msgstr "" #: appPlugins/ToolImage.py:700 appPlugins/ToolImage.py:719 msgid "Presets" msgstr "" #: appPlugins/ToolImage.py:721 msgid "Options presets to control the tracing." msgstr "" #: appPlugins/ToolImage.py:745 msgid "Error Threshold" msgstr "" #: appPlugins/ToolImage.py:747 msgid "Error threshold for straight lines and quadratic splines." msgstr "" #: appPlugins/ToolImage.py:762 msgid "Splines" msgstr "" #: appPlugins/ToolImage.py:772 msgid "Enhance R Angle" msgstr "" #: appPlugins/ToolImage.py:774 msgid "Enhance right angle corners." msgstr "" #: appPlugins/ToolImage.py:784 msgid "Noise Reduction" msgstr "" #: appPlugins/ToolImage.py:788 msgid "Path Omit" msgstr "" #: appPlugins/ToolImage.py:790 msgid "Edge node paths shorter than this will be discarded for noise reduction." msgstr "" #: appPlugins/ToolImage.py:800 msgid "Line Filter" msgstr "" #: appPlugins/ToolImage.py:813 msgid "Sampling" msgstr "" #: appPlugins/ToolImage.py:815 msgid "Palette" msgstr "" #: appPlugins/ToolImage.py:815 msgid "Random" msgstr "" #: appPlugins/ToolImage.py:815 msgid "Deterministic" msgstr "" #: appPlugins/ToolImage.py:822 msgid "Number of colors to use on palette." msgstr "" #: appPlugins/ToolImage.py:834 msgid "" "Color quantization will randomize a color if fewer pixels than (total pixels * ratio) has " "it." msgstr "" #: appPlugins/ToolImage.py:844 msgid "Cycles" msgstr "" #: appPlugins/ToolImage.py:846 msgid "Color quantization will be repeated this many times." msgstr "" #: appPlugins/ToolImage.py:865 msgid "Stroke" msgstr "" #: appPlugins/ToolImage.py:867 msgid "Width of the stroke to be applied to the shape." msgstr "" #: appPlugins/ToolImage.py:878 msgid "Rounding" msgstr "" #: appPlugins/ToolImage.py:880 msgid "Rounding coordinates to a given decimal place." msgstr "" #: appPlugins/ToolImage.py:895 msgid "Blur" msgstr "" #: appPlugins/ToolImage.py:901 msgid "Selective Gaussian blur preprocessing." msgstr "" #: appPlugins/ToolImage.py:911 msgid "Delta" msgstr "" #: appPlugins/ToolImage.py:913 msgid "RGBA delta threshold for selective Gaussian blur preprocessing." msgstr "" #: appPlugins/ToolImage.py:926 msgid "Import image" msgstr "" #: appPlugins/ToolImage.py:929 msgid "Open a image of raster type and then import it in FlatCAM." msgstr "" #: appPlugins/ToolInvertGerber.py:224 msgid "Gerber object that will be inverted." msgstr "" #: appPlugins/ToolInvertGerber.py:245 msgid "Parameters for this tool" msgstr "" #: appPlugins/ToolInvertGerber.py:292 msgid "" "Will invert the Gerber object: areas that have copper\n" "will be empty of copper and previous empty area will be\n" "filled with copper." msgstr "" #: appPlugins/ToolIsolation.py:1119 appPlugins/ToolIsolation.py:1258 #: appPlugins/ToolNCC.py:957 appPlugins/ToolNCC.py:1101 appPlugins/ToolOptimal.py:249 msgid "" "The Gerber object has one Polygon as geometry.\n" "There are no distances between geometry elements to be found." msgstr "" #: appPlugins/ToolIsolation.py:1153 appPlugins/ToolIsolation.py:1217 #: appPlugins/ToolNCC.py:990 appPlugins/ToolNCC.py:1059 msgid "Checking tools for validity." msgstr "" #: appPlugins/ToolIsolation.py:1170 appPlugins/ToolIsolation.py:1234 #: appPlugins/ToolNCC.py:1007 appPlugins/ToolNCC.py:1076 msgid "Checking ..." msgstr "" #: appPlugins/ToolIsolation.py:1194 appPlugins/ToolIsolation.py:1655 #: appPlugins/ToolIsolation.py:1996 appPlugins/ToolIsolation.py:2578 #: appPlugins/ToolIsolation.py:2822 appPlugins/ToolNCC.py:1032 appPlugins/ToolNCC.py:1551 #: appPlugins/ToolPaint.py:1166 appPlugins/ToolPaint.py:1876 msgid "There are no tools selected in the Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:1202 msgid "Incomplete isolation. At least one tool could not do a complete isolation." msgstr "" #: appPlugins/ToolIsolation.py:1304 appPlugins/ToolNCC.py:1146 msgid "Optimal tool diameter found" msgstr "" #: appPlugins/ToolIsolation.py:1437 appPlugins/ToolMilling.py:2168 #: appPlugins/ToolNCC.py:1295 appPlugins/ToolPaint.py:949 msgid "New tool added to Tool Table from Tools Database." msgstr "" #: appPlugins/ToolIsolation.py:1485 appPlugins/ToolNCC.py:1355 appPlugins/ToolPaint.py:1008 msgid "Default tool added to Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:1516 appPlugins/ToolNCC.py:1412 appPlugins/ToolPaint.py:1033 #: appPlugins/ToolSolderPaste.py:630 msgid "Tool from Tool Table was edited." msgstr "" #: appPlugins/ToolIsolation.py:1528 appPlugins/ToolNCC.py:1425 appPlugins/ToolPaint.py:1046 msgid "Cancelled. New diameter value is already in the Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:1576 appPlugins/ToolNCC.py:1476 appPlugins/ToolPaint.py:1096 #: appPlugins/ToolSolderPaste.py:687 msgid "Delete failed. Select a tool to delete." msgstr "" #: appPlugins/ToolIsolation.py:1582 appPlugins/ToolNCC.py:1482 appPlugins/ToolPaint.py:1102 #: appPlugins/ToolSolderPaste.py:692 msgid "Tools deleted from Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:1634 msgid "Isolating" msgstr "" #: appPlugins/ToolIsolation.py:1688 msgid "Click on a polygon to isolate it." msgstr "" #: appPlugins/ToolIsolation.py:1866 appPlugins/ToolIsolation.py:1894 #: appPlugins/ToolIsolation.py:2056 appPlugins/ToolIsolation.py:2283 msgid "Subtracting Geo" msgstr "" #: appPlugins/ToolIsolation.py:1870 appPlugins/ToolIsolation.py:2060 #: appPlugins/ToolIsolation.py:2287 msgid "Intersecting Geo" msgstr "" #: appPlugins/ToolIsolation.py:1920 appPlugins/ToolIsolation.py:2137 #: appPlugins/ToolIsolation.py:2364 msgid "Empty Geometry in" msgstr "" #: appPlugins/ToolIsolation.py:2149 msgid "" "Partial failure. The geometry was processed with all tools.\n" "But there are still not-isolated geometry elements. Try to include a tool with smaller " "diameter." msgstr "" #: appPlugins/ToolIsolation.py:2152 msgid "The following are coordinates for the copper features that could not be isolated:" msgstr "" #: appPlugins/ToolIsolation.py:2544 appPlugins/ToolPaint.py:1277 msgid "Removed polygon" msgstr "" #: appPlugins/ToolIsolation.py:2545 appPlugins/ToolPaint.py:1278 msgid "Click to add/remove next polygon or right click to start." msgstr "" #: appPlugins/ToolIsolation.py:2550 appPlugins/ToolPaint.py:1283 msgid "No polygon detected under click position." msgstr "" #: appPlugins/ToolIsolation.py:2592 appPlugins/ToolPaint.py:1313 #: appPlugins/ToolPunchGerber.py:1787 msgid "List of single polygons is empty. Aborting." msgstr "" #: appPlugins/ToolIsolation.py:2727 msgid "Click the end point of the paint area." msgstr "" #: appPlugins/ToolIsolation.py:3041 appPlugins/ToolNCC.py:3978 appPlugins/ToolPaint.py:2861 #: appPlugins/ToolSolderPaste.py:589 msgid "New tool added to Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:3395 msgid "Gerber object for isolation routing." msgstr "" #: appPlugins/ToolIsolation.py:3419 appPlugins/ToolNCC.py:4116 msgid "" "Tools pool from which the algorithm\n" "will pick the ones used for copper clearing." msgstr "" #: appPlugins/ToolIsolation.py:3443 msgid "" "This is the Tool Number.\n" "Isolation routing will start with the tool with the biggest \n" "diameter, continuing until there are no more tools.\n" "Only tools that create Isolation geometry will still be present\n" "in the resulting geometry. This is because with some tools\n" "this function will not be able to create routing geometry." msgstr "" #: appPlugins/ToolIsolation.py:3485 appPlugins/ToolMilling.py:4190 appPlugins/ToolNCC.py:210 #: appPlugins/ToolNCC.py:4196 appPlugins/ToolPaint.py:206 appPlugins/ToolPaint.py:3074 msgid "Add from DB" msgstr "" #: appPlugins/ToolIsolation.py:3507 appPlugins/ToolNCC.py:4223 msgid "" "Find a tool diameter that is guaranteed\n" "to do a complete isolation." msgstr "" #: appPlugins/ToolIsolation.py:3546 appPlugins/ToolMilling.py:4240 #: appPlugins/ToolNCC.py:4262 appPlugins/ToolPaint.py:3126 #: appPlugins/ToolSolderPaste.py:1337 msgid "" "Delete a selection of tools in the Tool Table\n" "by first selecting a row in the Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:3857 msgid "" "Specify the type of object to be excepted from isolation.\n" "It can be of type: Gerber or Geometry.\n" "What is selected here will dictate the kind\n" "of objects that will populate the 'Object' combobox." msgstr "" #: appPlugins/ToolIsolation.py:3867 msgid "Object whose area will be removed from isolation geometry." msgstr "" #: appPlugins/ToolIsolation.py:3938 appPlugins/ToolPunchGerber.py:2351 msgid "Select all available." msgstr "" #: appPlugins/ToolIsolation.py:3944 appPlugins/ToolPunchGerber.py:2357 msgid "Clear the selection." msgstr "" #: appPlugins/ToolIsolation.py:3983 msgid "" "Create a Geometry object with toolpaths to cut \n" "isolation outside, inside or on both sides of the\n" "object. For a Gerber object outside means outside\n" "of the Gerber feature and inside means inside of\n" "the Gerber feature, if possible at all. This means\n" "that only if the Gerber feature has openings inside, they\n" "will be isolated. If what is wanted is to cut isolation\n" "inside the actual Gerber feature, use a negative tool\n" "diameter above." msgstr "" #: appPlugins/ToolLevelling.py:555 appPlugins/ToolLevelling.py:885 msgid "" "Voronoi function can not be loaded.\n" "Shapely >= 1.8 is required" msgstr "" #: appPlugins/ToolLevelling.py:583 msgid "Click on canvas to add a Probe Point..." msgstr "" #: appPlugins/ToolLevelling.py:831 msgid "Point is not within the object area. Choose another point." msgstr "" #: appPlugins/ToolLevelling.py:851 msgid "Added a Probe Point... Click again to add another or right click to finish ..." msgstr "" #: appPlugins/ToolLevelling.py:873 msgid "Finished adding Probe Points..." msgstr "" #: appPlugins/ToolLevelling.py:1083 msgid "COM list updated ..." msgstr "" #: appPlugins/ToolLevelling.py:1119 msgid "Connected" msgstr "" #: appPlugins/ToolLevelling.py:1127 appPlugins/ToolLevelling.py:1149 #: appPlugins/ToolLevelling.py:2020 appPlugins/ToolLevelling.py:2027 msgid "Sender" msgstr "" #: appPlugins/ToolLevelling.py:1130 msgid "Port connected" msgstr "" #: appPlugins/ToolLevelling.py:1134 msgid "Could not connect to GRBL on port" msgstr "" #: appPlugins/ToolLevelling.py:1141 appPlugins/ToolLevelling.py:2101 msgid "Disconnected" msgstr "" #: appPlugins/ToolLevelling.py:1151 msgid "Port is connected. Disconnecting" msgstr "" #: appPlugins/ToolLevelling.py:1153 msgid "Could not connect to port" msgstr "" #: appPlugins/ToolLevelling.py:1183 appPlugins/ToolLevelling.py:1617 msgid "Sending" msgstr "" #: appPlugins/ToolLevelling.py:1312 msgid "GRBL is doing a home cycle." msgstr "" #: appPlugins/ToolLevelling.py:1318 msgid "GRBL software reset was sent." msgstr "" #: appPlugins/ToolLevelling.py:1326 msgid "GRBL resumed." msgstr "" #: appPlugins/ToolLevelling.py:1330 msgid "GRBL paused." msgstr "" #: appPlugins/ToolLevelling.py:1504 msgid "There is nothing to view" msgstr "" #: appPlugins/ToolLevelling.py:1510 msgid "Code Viewer" msgstr "" #: appPlugins/ToolLevelling.py:1548 msgid "Loaded Machine Code into Code Viewer" msgstr "" #: appPlugins/ToolLevelling.py:1562 appPlugins/ToolLevelling.py:1566 #: appPlugins/ToolLevelling.py:2315 msgid "Import Height Map" msgstr "" #: appPlugins/ToolLevelling.py:1593 msgid "Failed to open height map file" msgstr "" #: appPlugins/ToolLevelling.py:1643 msgid "Finished probing. Doing the autolevelling." msgstr "" #: appPlugins/ToolLevelling.py:1648 msgid "Sending probing GCode to the GRBL controller." msgstr "" #: appPlugins/ToolLevelling.py:1691 msgid "Empty GRBL heightmap." msgstr "" #: appPlugins/ToolLevelling.py:1695 msgid "Finished autolevelling." msgstr "" #: appPlugins/ToolLevelling.py:1764 msgid "CNCJob source object to be levelled." msgstr "" #: appPlugins/ToolLevelling.py:1797 msgid "Probe Points Table" msgstr "" #: appPlugins/ToolLevelling.py:1798 msgid "Generate GCode that will obtain the height map" msgstr "" #: appPlugins/ToolLevelling.py:1800 msgid "Show" msgstr "" #: appPlugins/ToolLevelling.py:1801 msgid "Toggle the display of the Probe Points table." msgstr "" #: appPlugins/ToolLevelling.py:1824 msgid "X-Y Coordinates" msgstr "" #: appPlugins/ToolLevelling.py:1824 msgid "Height" msgstr "" #: appPlugins/ToolLevelling.py:1828 msgid "Plot probing points" msgstr "" #: appPlugins/ToolLevelling.py:1830 msgid "" "Plot the probing points in the table.\n" "If a Voronoi method is used then\n" "the Voronoi areas are also plotted." msgstr "" #: appPlugins/ToolLevelling.py:1841 msgid "" "Will create a GCode which will be sent to the controller,\n" "either through a file or directly, with the intent to get the height map\n" "that is to modify the original GCode to level the cutting height." msgstr "" #: appPlugins/ToolLevelling.py:1950 msgid "Add Probe Points" msgstr "" #: appPlugins/ToolLevelling.py:2041 msgid "COM list" msgstr "" #: appPlugins/ToolLevelling.py:2043 appPlugins/ToolLevelling.py:2058 msgid "Lists the available serial ports." msgstr "" #: appPlugins/ToolLevelling.py:2047 msgid "Search" msgstr "" #: appPlugins/ToolLevelling.py:2049 msgid "Search for the available serial ports." msgstr "" #: appPlugins/ToolLevelling.py:2056 msgid "Baud rates" msgstr "" #: appPlugins/ToolLevelling.py:2075 msgid "New, custom baudrate." msgstr "" #: appPlugins/ToolLevelling.py:2083 msgid "Add the specified custom baudrate to the list." msgstr "" #: appPlugins/ToolLevelling.py:2089 msgid "Delete selected baudrate" msgstr "" #: appPlugins/ToolLevelling.py:2093 msgid "Reset" msgstr "" #: appPlugins/ToolLevelling.py:2095 msgid "Software reset of the controller." msgstr "" #: appPlugins/ToolLevelling.py:2103 msgid "Connect to the selected port with the selected baud rate." msgstr "" #: appPlugins/ToolLevelling.py:2127 msgid "Jog" msgstr "" #: appPlugins/ToolLevelling.py:2135 msgid "Zero Axes" msgstr "" #: appPlugins/ToolLevelling.py:2169 msgid "Pause/Resume" msgstr "" #: appPlugins/ToolLevelling.py:2228 msgid "Send Command" msgstr "" #: appPlugins/ToolLevelling.py:2230 appPlugins/ToolLevelling.py:2240 msgid "Send a custom command to GRBL." msgstr "" #: appPlugins/ToolLevelling.py:2235 msgid "Type GRBL command ..." msgstr "" #: appPlugins/ToolLevelling.py:2238 msgid "Send" msgstr "" #: appPlugins/ToolLevelling.py:2246 msgid "Get Config parameter" msgstr "" #: appPlugins/ToolLevelling.py:2248 msgid "A GRBL configuration parameter." msgstr "" #: appPlugins/ToolLevelling.py:2253 msgid "Type GRBL parameter ..." msgstr "" #: appPlugins/ToolLevelling.py:2256 msgid "Get" msgstr "" #: appPlugins/ToolLevelling.py:2258 msgid "Get the value of a specified GRBL parameter." msgstr "" #: appPlugins/ToolLevelling.py:2266 msgid "Get Report" msgstr "" #: appPlugins/ToolLevelling.py:2268 msgid "Print in shell the GRBL report." msgstr "" #: appPlugins/ToolLevelling.py:2274 msgid "Apply AutoLevelling" msgstr "" #: appPlugins/ToolLevelling.py:2276 msgid "" "Will send the probing GCode to the GRBL controller,\n" "wait for the Z probing data and then apply this data\n" "over the original GCode therefore doing autolevelling." msgstr "" #: appPlugins/ToolLevelling.py:2285 msgid "Will save the GRBL height map." msgstr "" #: appPlugins/ToolLevelling.py:2295 msgid "Save Probing GCode" msgstr "" #: appPlugins/ToolLevelling.py:2297 msgid "Will save the probing GCode." msgstr "" #: appPlugins/ToolLevelling.py:2308 msgid "View/Edit the probing GCode." msgstr "" #: appPlugins/ToolLevelling.py:2317 msgid "" "Import the file that has the Z heights\n" "obtained through probing and then apply this data\n" "over the original GCode therefore\n" "doing autolevelling." msgstr "" #: appPlugins/ToolMarkers.py:319 appPlugins/ToolMarkers.py:1181 msgid "Click to add next marker or right click to finish." msgstr "" #: appPlugins/ToolMarkers.py:514 appPlugins/ToolMarkers.py:825 appPlugins/ToolMarkers.py:871 #: appPlugins/ToolMarkers.py:934 appPlugins/ToolMarkers.py:980 msgid "Please select at least a location" msgstr "" #: appPlugins/ToolMarkers.py:802 appPlugins/ToolMarkers.py:911 msgid "The tool diameter is zero." msgstr "" #: appPlugins/ToolMarkers.py:903 appPlugins/ToolMarkers.py:1019 msgid "Excellon object with corner drills created." msgstr "" #: appPlugins/ToolMarkers.py:1055 appPlugins/ToolSolderPaste.py:966 msgid "There is no Geometry object available." msgstr "" #: appPlugins/ToolMarkers.py:1123 msgid "A Gerber object with corner markers was created." msgstr "" #: appPlugins/ToolMarkers.py:1180 msgid "Added marker" msgstr "" #: appPlugins/ToolMarkers.py:1264 msgid "The Gerber object to which will be added corner markers." msgstr "" #: appPlugins/ToolMarkers.py:1350 msgid "" "Reference for offseting the marker locations.\n" "- Edge - referenced from the bounding box edge\n" "- Center - referenced from the bounding box center" msgstr "" #: appPlugins/ToolMarkers.py:1400 msgid "Locations" msgstr "" #: appPlugins/ToolMarkers.py:1401 msgid "Locations where to place corner markers." msgstr "" #: appPlugins/ToolMarkers.py:1433 msgid "Toggle ALL" msgstr "" #: appPlugins/ToolMarkers.py:1452 msgid "" "When the manual type is chosen, the markers\n" "are manually placed on canvas." msgstr "" #: appPlugins/ToolMarkers.py:1457 msgid "Numeric" msgstr "" #: appPlugins/ToolMarkers.py:1470 msgid "Tuple of marker coordinates." msgstr "" #: appPlugins/ToolMarkers.py:1481 msgid "Add Marker" msgstr "" #: appPlugins/ToolMarkers.py:1484 appPlugins/ToolMarkers.py:1598 msgid "Will add corner markers to the selected object." msgstr "" #: appPlugins/ToolMarkers.py:1498 msgid "Drills in Locations" msgstr "" #: appPlugins/ToolMarkers.py:1525 msgid "Will add drill holes in the center of the markers." msgstr "" #: appPlugins/ToolMarkers.py:1538 msgid "Check in Locations" msgstr "" #: appPlugins/ToolMarkers.py:1545 msgid "" "Will create an Excellon object using a special preprocessor.\n" "The spindle will not start and the mounted probe will move to\n" "the corner locations, wait for the user interaction and then\n" "move to the next location until the last one." msgstr "" #: appPlugins/ToolMarkers.py:1561 msgid "Insert Markers" msgstr "" #: appPlugins/ToolMarkers.py:1563 msgid "" "Enabled only if markers are available (added to an object).\n" "Those markers will be inserted in yet another object." msgstr "" #: appPlugins/ToolMarkers.py:1576 msgid "Specify the type of object where the markers are inserted." msgstr "" #: appPlugins/ToolMarkers.py:1595 msgid "Insert Marker" msgstr "" #: appPlugins/ToolMilling.py:885 msgid "Could not build the Plugin UI" msgstr "" #: appPlugins/ToolMilling.py:1345 msgid "Milling Tool" msgstr "" #: appPlugins/ToolMilling.py:1415 msgid "Pressure" msgstr "" #: appPlugins/ToolMilling.py:1417 msgid "" "Negative value. The higher the absolute value\n" "the stronger the pressure of the brush on the material." msgstr "" #: appPlugins/ToolMilling.py:1944 msgid "" "For V-shape tools the depth of cut is\n" "calculated from other parameters like:\n" "- 'V-tip Angle' -> angle at the tip of the tool\n" "- 'V-tip Dia' -> diameter at the tip of the tool \n" "- Tool Dia -> 'Dia' column found in the Tool Table\n" "NB: a value of zero means that Tool Dia = 'V-tip Dia'" msgstr "" #: appPlugins/ToolMilling.py:2226 msgid "Tool added in Tool Table." msgstr "" #: appPlugins/ToolMilling.py:2341 msgid "Tool was edited in Tool Table." msgstr "" #: appPlugins/ToolMilling.py:2370 appPlugins/ToolMilling.py:2379 msgid "Failed. Select a tool to copy." msgstr "" #: appPlugins/ToolMilling.py:2403 msgid "Tool was copied in Tool Table." msgstr "" #: appPlugins/ToolMilling.py:2431 appPlugins/ToolMilling.py:2440 msgid "Failed. Select a tool to delete." msgstr "" #: appPlugins/ToolMilling.py:2461 msgid "Tool was deleted in Tool Table." msgstr "" #: appPlugins/ToolMilling.py:2749 appPlugins/ToolMilling.py:2914 msgid "This Geometry can't be processed because it is" msgstr "" #: appPlugins/ToolMilling.py:2782 appPlugins/ToolMilling.py:2948 msgid "Failed. No tool selected in the tool table ..." msgstr "" #: appPlugins/ToolMilling.py:3295 appPlugins/ToolPaint.py:1820 msgid "Geometry could not be painted completely" msgstr "" #: appPlugins/ToolMilling.py:3952 appPlugins/ToolNCC.py:4066 appPlugins/ToolPaint.py:2951 msgid "Source object for milling operation." msgstr "" #: appPlugins/ToolMilling.py:3965 msgid "Object for milling operation." msgstr "" #: appPlugins/ToolMilling.py:4004 msgid "Tools in the object used for milling." msgstr "" #: appPlugins/ToolMilling.py:4152 msgid "" "This is the Tool Number.\n" "When ToolChange is checked, on toolchange event this value\n" "will be showed as a T1, T2 ... Tn" msgstr "" #: appPlugins/ToolMilling.py:4162 msgid "" "Plot column. It is visible only for MultiGeo geometries, meaning geometries that holds " "the geometry\n" "data into the tools. For those geometries, deleting the tool will delete the geometry " "data also,\n" "so be WARNED. From the checkboxes on each row it can be enabled/disabled the plot on " "canvas\n" "for the corresponding tool." msgstr "" #: appPlugins/ToolMilling.py:4322 msgid "Offset Type" msgstr "" #: appPlugins/ToolMilling.py:4325 msgid "" "The value for the Offset can be:\n" "- Path -> There is no offset, the tool cut will be done through the geometry line.\n" "- In(side) -> The tool cut will follow the geometry inside. It will create a 'pocket'.\n" "- Out(side) -> The tool cut will follow the geometry line on the outside.\n" "- Custom -> The tool will cut at an chosen offset." msgstr "" #: appPlugins/ToolMilling.py:4345 msgid "" "The value to offset the cut when \n" "the Offset type selected is 'Custom'.\n" "The value can be positive for 'outside'\n" "cut and negative for 'inside' cut." msgstr "" #: appPlugins/ToolMilling.py:4888 msgid "" "The preprocessor JSON file that dictates\n" "Gcode output for Geometry (Milling) Objects." msgstr "" #: appPlugins/ToolMilling.py:4899 msgid "Allow levelling" msgstr "" #: appPlugins/ToolMilling.py:4901 msgid "Allow levelling by having segments size more than zero." msgstr "" #: appPlugins/ToolMove.py:95 msgid "MOVE: Click on the Start point ..." msgstr "" #: appPlugins/ToolMove.py:106 msgid "Cancelled. No object(s) to move." msgstr "" #: appPlugins/ToolMove.py:155 msgid "Error when mouse left click." msgstr "" #: appPlugins/ToolNCC.py:1044 msgid "Incomplete isolation. None of the selected tools could do a complete isolation." msgstr "" #: appPlugins/ToolNCC.py:1047 msgid "At least one of the selected tools can do a complete isolation." msgstr "" #: appPlugins/ToolNCC.py:1192 appPlugins/ToolNCC.py:1271 appPlugins/ToolNCC.py:1329 #: appPlugins/ToolNCC.py:3965 appPlugins/ToolPaint.py:837 appPlugins/ToolPaint.py:923 #: appPlugins/ToolPaint.py:983 appPlugins/ToolPaint.py:2848 #: appPlugins/ToolSolderPaste.py:584 msgid "Tool already in Tool Table." msgstr "" #: appPlugins/ToolNCC.py:1920 appPlugins/ToolNCC.py:2906 msgid "NCC Tool. Preparing non-copper polygons." msgstr "" #: appPlugins/ToolNCC.py:1980 appPlugins/ToolNCC.py:3025 msgid "NCC Tool. Calculate 'empty' area." msgstr "" #: appPlugins/ToolNCC.py:1991 appPlugins/ToolNCC.py:2020 appPlugins/ToolNCC.py:2126 #: appPlugins/ToolNCC.py:2139 appPlugins/ToolNCC.py:3040 appPlugins/ToolNCC.py:3145 #: appPlugins/ToolNCC.py:3160 appPlugins/ToolNCC.py:3428 appPlugins/ToolNCC.py:3529 #: appPlugins/ToolNCC.py:3544 msgid "Buffering finished" msgstr "" #: appPlugins/ToolNCC.py:1995 appPlugins/ToolNCC.py:2024 appPlugins/ToolNCC.py:2130 #: appPlugins/ToolNCC.py:2142 appPlugins/ToolNCC.py:3048 appPlugins/ToolNCC.py:3167 #: appPlugins/ToolNCC.py:3435 appPlugins/ToolNCC.py:3551 msgid "Could not get the extent of the area to be non copper cleared." msgstr "" #: appPlugins/ToolNCC.py:2003 appPlugins/ToolNCC.py:2153 appPlugins/ToolNCC.py:3178 msgid "NCC Tool. Finished calculation of 'empty' area." msgstr "" #: appPlugins/ToolNCC.py:2056 appPlugins/ToolNCC.py:3075 appPlugins/ToolNCC.py:3152 #: appPlugins/ToolNCC.py:3455 appPlugins/ToolNCC.py:3536 msgid "Isolation geometry is broken. Margin is less than isolation tool diameter." msgstr "" #: appPlugins/ToolNCC.py:2146 appPlugins/ToolNCC.py:3171 appPlugins/ToolNCC.py:3554 msgid "The selected object is not suitable for copper clearing." msgstr "" #: appPlugins/ToolNCC.py:2196 msgid "Clearing the polygon with the method: lines." msgstr "" #: appPlugins/ToolNCC.py:2206 msgid "Failed. Clearing the polygon with the method: seed." msgstr "" #: appPlugins/ToolNCC.py:2215 msgid "Failed. Clearing the polygon with the method: standard." msgstr "" #: appPlugins/ToolNCC.py:2231 msgid "Polygon could not be cleared. Location:" msgstr "" #: appPlugins/ToolNCC.py:2284 msgid "There is no copper clearing tool in the selection and at least one is needed." msgstr "" #: appPlugins/ToolNCC.py:2299 appPlugins/ToolNCC.py:2993 msgid "NCC Tool. Finished non-copper polygons. Normal copper clearing task started." msgstr "" #: appPlugins/ToolNCC.py:2327 appPlugins/ToolNCC.py:2565 msgid "NCC Tool failed creating bounding box." msgstr "" #: appPlugins/ToolNCC.py:2347 appPlugins/ToolNCC.py:2608 appPlugins/ToolNCC.py:3192 #: appPlugins/ToolNCC.py:3579 msgid "NCC Tool clearing with tool diameter" msgstr "" #: appPlugins/ToolNCC.py:2347 appPlugins/ToolNCC.py:2608 appPlugins/ToolNCC.py:3192 #: appPlugins/ToolNCC.py:3579 msgid "started." msgstr "" #: appPlugins/ToolNCC.py:2482 msgid "Could not use the tool for copper clear." msgstr "" #: appPlugins/ToolNCC.py:2505 appPlugins/ToolNCC.py:3354 msgid "" "There is no NCC Geometry in the file.\n" "Usually it means that the tool diameter is too big for the painted geometry.\n" "Change the painting parameters and try again." msgstr "" #: appPlugins/ToolNCC.py:2515 appPlugins/ToolNCC.py:3363 msgid "NCC Tool clear all done." msgstr "" #: appPlugins/ToolNCC.py:2518 appPlugins/ToolNCC.py:3366 msgid "NCC Tool clear all done but the copper features isolation is broken for" msgstr "" #: appPlugins/ToolNCC.py:2520 appPlugins/ToolNCC.py:2770 appPlugins/ToolNCC.py:3368 #: appPlugins/ToolNCC.py:3751 msgid "tools" msgstr "" #: appPlugins/ToolNCC.py:2547 msgid "NCC Tool. Rest machining copper clearing task started." msgstr "" #: appPlugins/ToolNCC.py:2766 appPlugins/ToolNCC.py:3747 msgid "NCC Tool Rest Machining clear all done." msgstr "" #: appPlugins/ToolNCC.py:2769 appPlugins/ToolNCC.py:3750 msgid "" "NCC Tool Rest Machining clear all done but the copper features isolation is broken for" msgstr "" #: appPlugins/ToolNCC.py:2867 msgid "NCC Tool started. Reading parameters." msgstr "" #: appPlugins/ToolNCC.py:3856 msgid "" "Try to use the Buffering Type = Full in Preferences -> Gerber General. Reload the Gerber " "file after this change." msgstr "" #: appPlugins/ToolNCC.py:4082 msgid "" "Specify the type of object to be cleared of excess copper.\n" "It can be of type: Gerber or Geometry.\n" "What is selected here will dictate the kind\n" "of objects that will populate the 'Object' combobox." msgstr "" #: appPlugins/ToolNCC.py:4140 msgid "" "This is the Tool Number.\n" "Non copper clearing will start with the tool with the biggest \n" "diameter, continuing until there are no more tools.\n" "Only tools that create NCC clearing geometry will still be present\n" "in the resulting geometry. This is because with some tools\n" "this function will not be able to create painting geometry." msgstr "" #: appPlugins/ToolNCC.py:4549 msgid "" "The type of FlatCAM object to be used as non copper clearing reference.\n" "It can be Gerber, Excellon or Geometry." msgstr "" #: appPlugins/ToolObjectDistance.py:86 appPlugins/ToolObjectDistance.py:432 msgid "Object Distance" msgstr "" #: appPlugins/ToolObjectDistance.py:188 msgid "Objects intersects or touch at" msgstr "" #: appPlugins/ToolObjectDistance.py:199 appPlugins/ToolObjectDistance.py:223 #: appPlugins/ToolObjectDistance.py:233 appPlugins/ToolObjectDistance.py:244 #: appPlugins/ToolObjectDistance.py:267 appPlugins/ToolObjectDistance.py:296 #: appPlugins/ToolObjectDistance.py:314 appPlugins/ToolObjectDistance.py:333 msgid "Select two objects and no more. Currently the selection has objects: " msgstr "" #: appPlugins/ToolObjectDistance.py:360 msgid "Jumped to the half point between the two selected objects" msgstr "" #: appPlugins/ToolObjectDistance.py:463 msgid "" "The type of distance to be calculated.\n" "- Nearest points - minimal distance between objects\n" "- Center points - distance between the center of the bounding boxes" msgstr "" #: appPlugins/ToolObjectDistance.py:469 msgid "Nearest points" msgstr "" #: appPlugins/ToolObjectDistance.py:469 msgid "Center points" msgstr "" #: appPlugins/ToolObjectDistance.py:587 msgid "Half Point" msgstr "" #: appPlugins/ToolObjectDistance.py:588 appPlugins/ToolObjectDistance.py:593 msgid "This is the middle point of the point to point Euclidean distance." msgstr "" #: appPlugins/ToolObjectDistance.py:603 msgid "Jump to Half Point" msgstr "" #: appPlugins/ToolOptimal.py:102 appPlugins/ToolOptimal.py:461 msgid "Find Optimal" msgstr "" #: appPlugins/ToolOptimal.py:213 msgid "Only Gerber objects can be evaluated." msgstr "" #: appPlugins/ToolOptimal.py:219 msgid "Optimal Tool. Started to search for the minimum distance between copper features." msgstr "" #: appPlugins/ToolOptimal.py:229 msgid "Optimal Tool. Parsing geometry for aperture" msgstr "" #: appPlugins/ToolOptimal.py:240 msgid "Optimal Tool. Creating a buffer for the object geometry." msgstr "" #: appPlugins/ToolOptimal.py:254 msgid "Optimal Tool. Finding the distances between each two elements. Iterations" msgstr "" #: appPlugins/ToolOptimal.py:288 msgid "Optimal Tool. Finding the minimum distance." msgstr "" #: appPlugins/ToolOptimal.py:305 msgid "Optimal Tool. Finished successfully." msgstr "" #: appPlugins/ToolOptimal.py:497 msgid "GERBER" msgstr "" #: appPlugins/ToolOptimal.py:523 msgid "Number of decimals kept for found distances." msgstr "" #: appPlugins/ToolOptimal.py:534 msgid "Minimum distance" msgstr "" #: appPlugins/ToolOptimal.py:535 msgid "Display minimum distance between copper features." msgstr "" #: appPlugins/ToolOptimal.py:545 msgid "Determined" msgstr "" #: appPlugins/ToolOptimal.py:557 msgid "Occurring" msgstr "" #: appPlugins/ToolOptimal.py:558 msgid "How many times this minimum is found." msgstr "" #: appPlugins/ToolOptimal.py:566 msgid "Minimum points coordinates" msgstr "" #: appPlugins/ToolOptimal.py:567 appPlugins/ToolOptimal.py:573 msgid "Coordinates for points where minimum distance was found." msgstr "" #: appPlugins/ToolOptimal.py:586 appPlugins/ToolOptimal.py:671 msgid "Jump to selected position" msgstr "" #: appPlugins/ToolOptimal.py:588 appPlugins/ToolOptimal.py:673 msgid "" "Select a position in the Locations text box and then\n" "click this button." msgstr "" #: appPlugins/ToolOptimal.py:598 msgid "Other distances" msgstr "" #: appPlugins/ToolOptimal.py:599 msgid "" "Will display other distances in the Gerber file ordered from\n" "the minimum to the maximum, not including the absolute minimum." msgstr "" #: appPlugins/ToolOptimal.py:610 msgid "Other distances points coordinates" msgstr "" #: appPlugins/ToolOptimal.py:611 appPlugins/ToolOptimal.py:626 appPlugins/ToolOptimal.py:633 #: appPlugins/ToolOptimal.py:650 appPlugins/ToolOptimal.py:657 msgid "" "Other distances and the coordinates for points\n" "where the distance was found." msgstr "" #: appPlugins/ToolOptimal.py:625 msgid "Gerber distances" msgstr "" #: appPlugins/ToolOptimal.py:649 msgid "Points coordinates" msgstr "" #: appPlugins/ToolOptimal.py:681 msgid "Find Minimum" msgstr "" #: appPlugins/ToolOptimal.py:684 msgid "" "Calculate the minimum distance between copper features,\n" "this will allow the determination of the right tool to\n" "use for isolation or copper clearing." msgstr "" #: appPlugins/ToolPDF.py:78 appPlugins/ToolPDF.py:82 msgid "Open PDF" msgstr "" #: appPlugins/ToolPDF.py:85 msgid "Open PDF cancelled" msgstr "" #: appPlugins/ToolPDF.py:113 msgid "Parsing" msgstr "" #: appPlugins/ToolPDF.py:273 appPlugins/ToolPDF.py:346 #, python-format msgid "Rendering PDF layer #%d ..." msgstr "" #: appPlugins/ToolPDF.py:277 appPlugins/ToolPDF.py:350 msgid "Open PDF file failed." msgstr "" #: appPlugins/ToolPDF.py:282 appPlugins/ToolPDF.py:355 msgid "Rendered" msgstr "" #: appPlugins/ToolPaint.py:1144 msgid "Can't do Paint on MultiGeo geometries" msgstr "" #: appPlugins/ToolPaint.py:1181 msgid "Click on a polygon to paint it." msgstr "" #: appPlugins/ToolPaint.py:1781 msgid "Painting polygon with method: lines." msgstr "" #: appPlugins/ToolPaint.py:1793 msgid "Failed. Painting polygon with method: seed." msgstr "" #: appPlugins/ToolPaint.py:1804 msgid "Failed. Painting polygon with method: standard." msgstr "" #: appPlugins/ToolPaint.py:1896 appPlugins/ToolPaint.py:2085 msgid "Painting with tool diameter = " msgstr "" #: appPlugins/ToolPaint.py:1899 appPlugins/ToolPaint.py:2088 msgid "started" msgstr "" #: appPlugins/ToolPaint.py:1926 appPlugins/ToolPaint.py:2075 msgid "There is no geometry to process or the tool diameter is too big." msgstr "" #: appPlugins/ToolPaint.py:2041 appPlugins/ToolPaint.py:2267 msgid "" "There is no Painting Geometry in the file.\n" "Usually it means that the tool diameter is too big for the painted geometry.\n" "Change the painting parameters and try again." msgstr "" #: appPlugins/ToolPaint.py:2321 msgid "Painting ..." msgstr "" #: appPlugins/ToolPaint.py:2355 appPlugins/ToolPaint.py:2360 appPlugins/ToolPaint.py:2368 #: appPlugins/ToolPaint.py:2457 appPlugins/ToolPaint.py:2461 appPlugins/ToolPaint.py:2469 #: appPlugins/ToolPaint.py:2540 appPlugins/ToolPaint.py:2545 appPlugins/ToolPaint.py:2551 msgid "Paint Plugin." msgstr "" #: appPlugins/ToolPaint.py:2356 appPlugins/ToolPaint.py:2360 appPlugins/ToolPaint.py:2368 msgid "Normal painting polygon task started." msgstr "" #: appPlugins/ToolPaint.py:2357 appPlugins/ToolPaint.py:2458 appPlugins/ToolPaint.py:2542 msgid "Buffering geometry..." msgstr "" #: appPlugins/ToolPaint.py:2382 appPlugins/ToolPaint.py:2476 appPlugins/ToolPaint.py:2589 msgid "No polygon found." msgstr "" #: appPlugins/ToolPaint.py:2457 appPlugins/ToolPaint.py:2461 appPlugins/ToolPaint.py:2469 msgid "Paint all polygons task started." msgstr "" #: appPlugins/ToolPaint.py:2541 appPlugins/ToolPaint.py:2545 appPlugins/ToolPaint.py:2551 msgid "Painting area task started." msgstr "" #: appPlugins/ToolPaint.py:2928 msgid "" "Create a Geometry object with toolpaths\n" "that cover only the copper pattern." msgstr "" #: appPlugins/ToolPaint.py:2967 msgid "" "Specify the type of object to be painted.\n" "It can be of type: Gerber or Geometry.\n" "What is selected here will dictate the kind\n" "of objects that will populate the 'Object' combobox." msgstr "" #: appPlugins/ToolPaint.py:3001 msgid "" "Tools pool from which the algorithm\n" "will pick the ones used for painting." msgstr "" #: appPlugins/ToolPaint.py:3024 msgid "" "This is the Tool Number.\n" "Painting will start with the tool with the biggest diameter,\n" "continuing until there are no more tools.\n" "Only tools that create painting geometry will still be present\n" "in the resulting geometry. This is because with some tools\n" "this function will not be able to create painting geometry." msgstr "" #: appPlugins/ToolPaint.py:3307 msgid "" "The type of FlatCAM object to be used as paint reference.\n" "It can be Gerber, Excellon or Geometry." msgstr "" #: appPlugins/ToolPaint.py:3351 msgid "Create a Geometry Object which paints the polygons." msgstr "" #: appPlugins/ToolPanelize.py:96 appPlugins/ToolPanelize.py:1120 msgid "Panelization" msgstr "" #: appPlugins/ToolPanelize.py:349 msgid "Columns or Rows are zero value. Change them to a positive integer." msgstr "" #: appPlugins/ToolPanelize.py:392 msgid "Generating panel ... " msgstr "" #: appPlugins/ToolPanelize.py:487 appPlugins/ToolPanelize.py:800 #: appPlugins/ToolPanelize.py:1072 tclCommands/TclCommandPanelize.py:292 msgid "Generating panel ... Adding the source code." msgstr "" #: appPlugins/ToolPanelize.py:728 msgid "Optimizing the overlapping paths." msgstr "" #: appPlugins/ToolPanelize.py:760 msgid "Optimization complete." msgstr "" #: appPlugins/ToolPanelize.py:1081 msgid "Generating panel... Spawning copies" msgstr "" #: appPlugins/ToolPanelize.py:1097 #, python-brace-format msgid "{text} Too big for the constrain area. Final panel has {col} columns and {row} rows" msgstr "" #: appPlugins/ToolPanelize.py:1105 msgid "Panel created successfully." msgstr "" #: appPlugins/ToolPanelize.py:1165 msgid "" "Specify the type of object to be panelized\n" "It can be of type: Gerber, Excellon or Geometry.\n" "The selection here decide the type of objects that will be\n" "in the Object combobox." msgstr "" #: appPlugins/ToolPanelize.py:1198 msgid "" "Object to be panelized. This means that it will\n" "be duplicated in an array of rows and columns." msgstr "" #: appPlugins/ToolPanelize.py:1210 msgid "" "Choose the reference for panelization:\n" "- Object = the bounding box of a different object\n" "- Bounding Box = the bounding box of the object to be panelized\n" "\n" "The reference is useful when doing panelization for more than one\n" "object. The spacings (really offsets) will be applied in reference\n" "to this reference object therefore maintaining the panelized\n" "objects in sync." msgstr "" #: appPlugins/ToolPanelize.py:1243 msgid "" "Specify the type of object to be used as an container for\n" "panelization. It can be: Gerber or Geometry type.\n" "The selection here decide the type of objects that will be\n" "in the Box Object combobox." msgstr "" #: appPlugins/ToolPanelize.py:1258 msgid "" "The actual object that is used as container for the\n" " selected object that is to be panelized." msgstr "" #: appPlugins/ToolPanelize.py:1266 msgid "Panel Data" msgstr "" #: appPlugins/ToolPanelize.py:1268 msgid "" "This informations will shape the resulting panel.\n" "The number of rows and columns will set how many\n" "duplicates of the original geometry will be generated.\n" "\n" "The spacings will set the distance between any two\n" "elements of the panel array." msgstr "" #: appPlugins/ToolPanelize.py:1367 msgid "Constrain panel within" msgstr "" #: appPlugins/ToolPanelize.py:1414 msgid "Panelize Object" msgstr "" #: appPlugins/ToolPanelize.py:1417 appPlugins/ToolRulesCheck.py:1761 msgid "" "Panelize the specified object around the specified box.\n" "In other words it creates multiple copies of the source object,\n" "arranged in a 2D array of rows and columns." msgstr "" #: appPlugins/ToolPcbWizard.py:102 appPlugins/ToolPcbWizard.py:386 msgid "PcbWizard Import" msgstr "" #: appPlugins/ToolPcbWizard.py:203 appPlugins/ToolPcbWizard.py:207 msgid "Load PcbWizard Excellon file" msgstr "" #: appPlugins/ToolPcbWizard.py:226 appPlugins/ToolPcbWizard.py:230 msgid "Load PcbWizard INF file" msgstr "" #: appPlugins/ToolPcbWizard.py:278 msgid "" "The INF file does not contain the tool table.\n" "Try to open the Excellon file from File -> Open -> Excellon\n" "and edit the drill diameters manually." msgstr "" #: appPlugins/ToolPcbWizard.py:298 msgid "PcbWizard .INF file loaded." msgstr "" #: appPlugins/ToolPcbWizard.py:302 msgid "Main PcbWizard Excellon file loaded." msgstr "" #: appPlugins/ToolPcbWizard.py:338 msgid "Cannot parse file" msgstr "" #: appPlugins/ToolPcbWizard.py:369 msgid "Import Excellon file failed." msgstr "" #: appPlugins/ToolPcbWizard.py:376 msgid "Imported" msgstr "" #: appPlugins/ToolPcbWizard.py:379 msgid "Excellon merging is in progress. Please wait..." msgstr "" #: appPlugins/ToolPcbWizard.py:381 msgid "The imported Excellon file is empty." msgstr "" #: appPlugins/ToolPcbWizard.py:405 msgid "Load files" msgstr "" #: appPlugins/ToolPcbWizard.py:411 msgid "Excellon file" msgstr "" #: appPlugins/ToolPcbWizard.py:413 msgid "" "Load the Excellon file.\n" "Usually it has a .DRL extension" msgstr "" #: appPlugins/ToolPcbWizard.py:420 msgid "INF file" msgstr "" #: appPlugins/ToolPcbWizard.py:422 msgid "Load the INF file." msgstr "" #: appPlugins/ToolPcbWizard.py:435 msgid "Tool Number" msgstr "" #: appPlugins/ToolPcbWizard.py:437 msgid "Tool diameter in file units." msgstr "" #: appPlugins/ToolPcbWizard.py:452 msgid "Int. digits" msgstr "" #: appPlugins/ToolPcbWizard.py:454 msgid "The number of digits for the integral part of the coordinates." msgstr "" #: appPlugins/ToolPcbWizard.py:462 msgid "Frac. digits" msgstr "" #: appPlugins/ToolPcbWizard.py:464 msgid "The number of digits for the fractional part of the coordinates." msgstr "" #: appPlugins/ToolPcbWizard.py:472 msgid "No Suppression" msgstr "" #: appPlugins/ToolPcbWizard.py:473 msgid "Zeros supp." msgstr "" #: appPlugins/ToolPcbWizard.py:475 msgid "" "The type of zeros suppression used.\n" "Can be of type:\n" "- LZ = leading zeros are kept\n" "- TZ = trailing zeros are kept\n" "- No Suppression = no zero suppression" msgstr "" #: appPlugins/ToolPcbWizard.py:489 msgid "" "The type of units that the coordinates and tool\n" "diameters are using. Can be INCH or MM." msgstr "" #: appPlugins/ToolPcbWizard.py:497 msgid "Import Excellon" msgstr "" #: appPlugins/ToolPcbWizard.py:499 msgid "" "Import an Excellon file\n" "that store it's information's in 2 files.\n" "One usually has .DRL extension while\n" "the other has .INF extension." msgstr "" #: appPlugins/ToolPunchGerber.py:574 msgid "Click on a pad to select it." msgstr "" #: appPlugins/ToolPunchGerber.py:823 appPlugins/ToolPunchGerber.py:956 msgid "The value of the fixed diameter is 0.0. Aborting." msgstr "" #: appPlugins/ToolPunchGerber.py:1732 msgid "Added pad" msgstr "" #: appPlugins/ToolPunchGerber.py:1733 msgid "Click to add next pad or right click to start." msgstr "" #: appPlugins/ToolPunchGerber.py:1745 msgid "Removed pad" msgstr "" #: appPlugins/ToolPunchGerber.py:1746 msgid "Click to add/remove next pad or right click to start." msgstr "" #: appPlugins/ToolPunchGerber.py:1751 msgid "No pad detected under click position." msgstr "" #: appPlugins/ToolPunchGerber.py:1939 msgid "All selectable pads are selected." msgstr "" #: appPlugins/ToolPunchGerber.py:1956 msgid "Selection cleared." msgstr "" #: appPlugins/ToolPunchGerber.py:2031 msgid "Gerber into which to punch holes" msgstr "" #: appPlugins/ToolPunchGerber.py:2178 msgid "Remove the geometry of Excellon from the Gerber to create the holes in pads." msgstr "" #: appPlugins/ToolPunchGerber.py:2333 msgid "" "When the manual type is chosen, the pads to be punched\n" "are selected on the canvas but only those that\n" "are in the processed pads." msgstr "" #: appPlugins/ToolPunchGerber.py:2367 msgid "" "Create a Gerber object from the selected object, within\n" "the specified box." msgstr "" #: appPlugins/ToolQRCode.py:215 appPlugins/ToolQRCode.py:561 appPlugins/ToolQRCode.py:612 msgid "Cancelled. There is no QRCode Data in the text box." msgstr "" #: appPlugins/ToolQRCode.py:392 msgid "QRCode Tool done." msgstr "" #: appPlugins/ToolQRCode.py:763 msgid "Gerber Object to which the QRCode will be added." msgstr "" #: appPlugins/ToolQRCode.py:803 msgid "The parameters used to shape the QRCode." msgstr "" #: appPlugins/ToolQRCode.py:913 msgid "Export QRCode" msgstr "" #: appPlugins/ToolQRCode.py:915 msgid "" "Show a set of controls allowing to export the QRCode\n" "to a SVG file or an PNG file." msgstr "" #: appPlugins/ToolQRCode.py:951 msgid "Transparent back color" msgstr "" #: appPlugins/ToolQRCode.py:976 msgid "Export QRCode SVG" msgstr "" #: appPlugins/ToolQRCode.py:978 msgid "Export a SVG file with the QRCode content." msgstr "" #: appPlugins/ToolQRCode.py:989 msgid "Export QRCode PNG" msgstr "" #: appPlugins/ToolQRCode.py:991 msgid "Export a PNG image file with the QRCode content." msgstr "" #: appPlugins/ToolQRCode.py:1002 msgid "Insert QRCode" msgstr "" #: appPlugins/ToolQRCode.py:1005 msgid "Create the QRCode object." msgstr "" #: appPlugins/ToolReport.py:18 appPlugins/ToolReport.py:148 msgid "Object Report" msgstr "" #: appPlugins/ToolReport.py:143 msgid "Object Properties are displayed." msgstr "" #: appPlugins/ToolReport.py:165 msgid "TYPE" msgstr "" #: appPlugins/ToolReport.py:166 msgid "NAME" msgstr "" #: appPlugins/ToolReport.py:196 msgid "Geo Type" msgstr "" #: appPlugins/ToolReport.py:199 msgid "Single-Geo" msgstr "" #: appPlugins/ToolReport.py:200 msgid "Multi-Geo" msgstr "" #: appPlugins/ToolReport.py:355 appPlugins/ToolReport.py:360 appPlugins/ToolReport.py:362 msgid "Metric" msgstr "" #: appPlugins/ToolRulesCheck.py:105 appPlugins/ToolRulesCheck.py:1162 msgid "Check Rules" msgstr "" #: appPlugins/ToolRulesCheck.py:677 appPlugins/ToolRulesCheck.py:737 #: appPlugins/ToolRulesCheck.py:774 appPlugins/ToolRulesCheck.py:846 #: appPlugins/ToolRulesCheck.py:900 appPlugins/ToolRulesCheck.py:938 #: appPlugins/ToolRulesCheck.py:1003 msgid "Value is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:691 msgid "TOP -> Copper to Copper clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:702 msgid "BOTTOM -> Copper to Copper clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:707 appPlugins/ToolRulesCheck.py:801 #: appPlugins/ToolRulesCheck.py:965 msgid "At least one Gerber object has to be selected for this rule but none is selected." msgstr "" #: appPlugins/ToolRulesCheck.py:743 msgid "One of the copper Gerber objects or the Outline Gerber object is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:756 appPlugins/ToolRulesCheck.py:920 msgid "Outline Gerber object presence is mandatory for this rule but it is not selected." msgstr "" #: appPlugins/ToolRulesCheck.py:773 appPlugins/ToolRulesCheck.py:800 msgid "Silk to Silk clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:786 msgid "TOP -> Silk to Silk clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:796 msgid "BOTTOM -> Silk to Silk clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:852 msgid "One or more of the Gerber objects is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:860 msgid "TOP -> Silk to Solder Mask Clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:866 msgid "BOTTOM -> Silk to Solder Mask Clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:870 msgid "Both Silk and Solder Mask Gerber objects has to be either both Top or both Bottom." msgstr "" #: appPlugins/ToolRulesCheck.py:906 msgid "One of the Silk Gerber objects or the Outline Gerber object is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:950 msgid "TOP -> Minimum Solder Mask Sliver" msgstr "" #: appPlugins/ToolRulesCheck.py:960 msgid "BOTTOM -> Minimum Solder Mask Sliver" msgstr "" #: appPlugins/ToolRulesCheck.py:1009 msgid "One of the Copper Gerber objects or the Excellon objects is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:1025 msgid "Excellon object presence is mandatory for this rule but none is selected." msgstr "" #: appPlugins/ToolRulesCheck.py:1103 appPlugins/ToolRulesCheck.py:1116 #: appPlugins/ToolRulesCheck.py:1127 appPlugins/ToolRulesCheck.py:1140 msgid "STATUS" msgstr "" #: appPlugins/ToolRulesCheck.py:1106 appPlugins/ToolRulesCheck.py:1130 msgid "FAILED" msgstr "" #: appPlugins/ToolRulesCheck.py:1119 appPlugins/ToolRulesCheck.py:1143 msgid "PASSED" msgstr "" #: appPlugins/ToolRulesCheck.py:1120 appPlugins/ToolRulesCheck.py:1144 msgid "Violations: There are no violations for the current rule." msgstr "" #: appPlugins/ToolRulesCheck.py:1239 msgid "Top" msgstr "" #: appPlugins/ToolRulesCheck.py:1257 msgid "The Top Gerber Copper object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1273 appPlugins/ToolRulesCheck.py:1339 msgid "SM" msgstr "" #: appPlugins/ToolRulesCheck.py:1275 msgid "The Top Gerber Solder Mask object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1293 msgid "The Top Gerber Silkscreen object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1305 msgid "Bottom" msgstr "" #: appPlugins/ToolRulesCheck.py:1323 msgid "The Bottom Gerber Copper object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1341 msgid "The Bottom Gerber Solder Mask object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1359 msgid "The Bottom Gerber Silkscreen object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1388 msgid "The Gerber Outline (Cutout) object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1402 msgid "Excellon objects for which to check rules." msgstr "" #: appPlugins/ToolRulesCheck.py:1421 msgid "" "Excellon object for which to check rules.\n" "Holds the plated holes or a general Excellon file content." msgstr "" #: appPlugins/ToolRulesCheck.py:1440 msgid "" "Excellon object for which to check rules.\n" "Holds the non-plated holes." msgstr "" #: appPlugins/ToolRulesCheck.py:1758 msgid "Run Rules Check" msgstr "" #: appPlugins/ToolShell.py:58 msgid "Type a command to be executed ..." msgstr "" #: appPlugins/ToolShell.py:67 msgid "Clear the text." msgstr "" #: appPlugins/ToolShell.py:102 appPlugins/ToolShell.py:104 msgid "...processing..." msgstr "" #: appPlugins/ToolShell.py:323 msgid "FlatCAM Evo Shell" msgstr "" #: appPlugins/ToolSolderPaste.py:110 appPlugins/ToolSolderPaste.py:1229 msgid "SolderPaste" msgstr "" #: appPlugins/ToolSolderPaste.py:554 msgid "Please enter a tool diameter to add, in Float format." msgstr "" #: appPlugins/ToolSolderPaste.py:642 msgid "Cancelled. Already in the Tool Table." msgstr "" #: appPlugins/ToolSolderPaste.py:746 appPlugins/ToolSolderPaste.py:970 #: appPlugins/ToolSolderPaste.py:1103 appPlugins/ToolSolderPaste.py:1106 #: appPlugins/ToolSolderPaste.py:1165 msgid "Selected object cannot be used." msgstr "" #: appPlugins/ToolSolderPaste.py:777 msgid "Tools table is empty." msgstr "" #: appPlugins/ToolSolderPaste.py:933 msgid "Some or all pads have no solder due of inadequate nozzle diameters..." msgstr "" #: appPlugins/ToolSolderPaste.py:947 msgid "Generating Solder Paste dispensing geometry..." msgstr "" #: appPlugins/ToolSolderPaste.py:1174 msgid "Export GCode ..." msgstr "" #: appPlugins/ToolSolderPaste.py:1257 msgid "A plugin to help dispense solder paste on the PCB pads using a CNC machine." msgstr "" #: appPlugins/ToolSolderPaste.py:1265 msgid "Gerber Solderpaste object." msgstr "" #: appPlugins/ToolSolderPaste.py:1286 msgid "" "Tools pool from which the algorithm\n" "will pick the ones used for dispensing solder paste." msgstr "" #: appPlugins/ToolSolderPaste.py:1308 msgid "" "This is the Tool Number.\n" "The solder dispensing will start with the tool with the biggest \n" "diameter, continuing until there are no more Nozzle tools.\n" "If there are no longer tools but there are still pads not covered\n" " with solder paste, the app will issue a warning message box." msgstr "" #: appPlugins/ToolSolderPaste.py:1315 msgid "" "Tool Diameter. Its value\n" "is the width of the solder paste dispensed." msgstr "" #: appPlugins/ToolSolderPaste.py:1330 msgid "" "Add a new nozzle tool to the Tool Table\n" "with the diameter specified above." msgstr "" #: appPlugins/ToolSolderPaste.py:1398 msgid "Dispense" msgstr "" #: appPlugins/ToolSolderPaste.py:1413 msgid "Z Start" msgstr "" #: appPlugins/ToolSolderPaste.py:1426 msgid "Z Action" msgstr "" #: appPlugins/ToolSolderPaste.py:1439 msgid "Z Stop" msgstr "" #: appPlugins/ToolSolderPaste.py:1665 msgid "Generate solder paste dispensing geometry." msgstr "" #: appPlugins/ToolSolderPaste.py:1683 msgid "" "Geometry Solder Paste object.\n" "The name of the object has to end in:\n" "'_solderpaste' as a protection." msgstr "" #: appPlugins/ToolSolderPaste.py:1692 msgid "CNCJob" msgstr "" #: appPlugins/ToolSolderPaste.py:1702 msgid "Generate CNCJob" msgstr "" #: appPlugins/ToolSolderPaste.py:1705 msgid "" "Generate GCode for Solder Paste dispensing\n" "on PCB pads." msgstr "" #: appPlugins/ToolSolderPaste.py:1724 msgid "" "CNCJob Solder paste object.\n" "In order to enable the GCode save section,\n" "the name of the object has to end in:\n" "'_solderpaste' as a protection." msgstr "" #: appPlugins/ToolSolderPaste.py:1733 msgid "Save GCode" msgstr "" #: appPlugins/ToolSolderPaste.py:1736 msgid "" "Save the generated GCode for Solder Paste dispensing\n" "on PCB pads, to a file." msgstr "" #: appPlugins/ToolSub.py:260 appPlugins/ToolSub.py:498 msgid "No Target object loaded." msgstr "" #: appPlugins/ToolSub.py:263 msgid "Loading geometry from Gerber objects." msgstr "" #: appPlugins/ToolSub.py:281 appPlugins/ToolSub.py:511 msgid "No Subtractor object loaded." msgstr "" #: appPlugins/ToolSub.py:296 msgid "Not possible to subtract from the same object." msgstr "" #: appPlugins/ToolSub.py:336 msgid "Finished parsing geometry for aperture" msgstr "" #: appPlugins/ToolSub.py:338 msgid "Subtraction aperture processing finished." msgstr "" #: appPlugins/ToolSub.py:471 appPlugins/ToolSub.py:666 appPlugins/ToolSub.py:748 msgid "Generating new object failed." msgstr "" #: appPlugins/ToolSub.py:475 appPlugins/ToolSub.py:671 msgid "Created" msgstr "" #: appPlugins/ToolSub.py:524 msgid "Currently, the Subtractor geometry cannot be of type Multigeo." msgstr "" #: appPlugins/ToolSub.py:564 msgid "Parsing solid_geometry ..." msgstr "" #: appPlugins/ToolSub.py:566 msgid "Parsing solid_geometry for tool" msgstr "" #: appPlugins/ToolSub.py:784 msgid "A plugin to help subtract a Gerber/Geometry object from another of the same type." msgstr "" #: appPlugins/ToolSub.py:842 msgid "" "Gerber object from which to subtract\n" "the subtractor Gerber object." msgstr "" #: appPlugins/ToolSub.py:863 appPlugins/ToolSub.py:925 msgid "Subtractor" msgstr "" #: appPlugins/ToolSub.py:865 msgid "" "Gerber object that will be subtracted\n" "from the target Gerber object." msgstr "" #: appPlugins/ToolSub.py:875 msgid "Subtract Gerber" msgstr "" #: appPlugins/ToolSub.py:878 msgid "" "Will remove the area occupied by the subtractor\n" "Gerber from the Target Gerber.\n" "Can be used to remove the overlapping silkscreen\n" "over the soldermask." msgstr "" #: appPlugins/ToolSub.py:904 msgid "GEOMETRY" msgstr "" #: appPlugins/ToolSub.py:910 msgid "" "Geometry object from which to subtract\n" "the subtractor Geometry object." msgstr "" #: appPlugins/ToolSub.py:927 msgid "" "Geometry object that will be subtracted\n" "from the target Geometry object." msgstr "" #: appPlugins/ToolSub.py:948 msgid "Subtract Geometry" msgstr "" #: appPlugins/ToolSub.py:951 msgid "" "Will remove the area occupied by the subtractor\n" "Geometry from the Target Geometry." msgstr "" #: appPlugins/ToolTransform.py:326 msgid "CNCJob objects can't be rotated." msgstr "" #: appPlugins/ToolTransform.py:360 msgid "CNCJob objects can't be mirrored/flipped." msgstr "" #: appPlugins/ToolTransform.py:391 msgid "Skew transformation can not be done for 0, 90 and 180 degrees." msgstr "" #: appPlugins/ToolTransform.py:404 msgid "CNCJob objects can't be skewed." msgstr "" #: appPlugins/ToolTransform.py:420 msgid "Skew on the" msgstr "" #: appPlugins/ToolTransform.py:420 appPlugins/ToolTransform.py:455 #: appPlugins/ToolTransform.py:492 msgid "axis done" msgstr "" #: appPlugins/ToolTransform.py:438 msgid "CNCJob objects can't be scaled." msgstr "" #: appPlugins/ToolTransform.py:455 msgid "Scale on the" msgstr "" #: appPlugins/ToolTransform.py:471 msgid "CNCJob objects can't be offset." msgstr "" #: appPlugins/ToolTransform.py:492 msgid "Offset on the" msgstr "" #: appPlugins/ToolTransform.py:508 msgid "CNCJob objects can't be buffered." msgstr "" #: appPlugins/ToolTransform.py:586 msgid "A plugin that allow geometry transformation." msgstr "" #: appPlugins/ToolTransform.py:661 msgid "" "The object used as reference.\n" "The used point is the center of it's bounding box." msgstr "" #: appProcess.py:172 msgid "processes running." msgstr "" #: appTranslation.py:112 msgid "The application will restart." msgstr "" #: appTranslation.py:113 msgid "Are you sure do you want to change the current language to" msgstr "" #: appTranslation.py:244 msgid "The language will be applied at the next application start." msgstr "" #: appTranslation.py:245 msgid "The user does not have admin rights or UAC issues." msgstr "" #: appTranslation.py:246 appTranslation.py:252 msgid "Quit" msgstr "" #: assets/linux/flatcam-beta.desktop:3 msgid "FlatCAM Beta" msgstr "" #: assets/linux/flatcam-beta.desktop:8 msgid "G-Code from GERBERS" msgstr "" #: camlib.py:710 msgid "self.solid_geometry is neither BaseGeometry or list." msgstr "" #: camlib.py:1153 msgid "Pass" msgstr "" #: camlib.py:1175 msgid "Get Exteriors" msgstr "" #: camlib.py:1178 msgid "Get Interiors" msgstr "" #: camlib.py:2534 msgid "Object was rotated" msgstr "" #: camlib.py:2602 msgid "Object was skewed" msgstr "" #: camlib.py:2673 msgid "Object was buffered" msgstr "" #: camlib.py:2936 msgid "There is no such parameter" msgstr "" #: camlib.py:3153 camlib.py:3197 camlib.py:5666 camlib.py:6095 msgid "Indexing geometry before generating G-Code..." msgstr "" #: camlib.py:3230 camlib.py:4340 camlib.py:4599 msgid "" "The Cut Z parameter has positive value. It is the depth value to drill into material.\n" "The Cut Z parameter needs to have a negative value, assuming it is a typo therefore the " "app will convert the value to negative. Check the resulting CNC code (Gcode etc)." msgstr "" #: camlib.py:3237 msgid "The Cut Z parameter is zero. There will be no cut, aborting" msgstr "" #: camlib.py:3387 camlib.py:3828 msgid "The End X,Y format has to be (x, y)." msgstr "" #: camlib.py:3472 camlib.py:3922 camlib.py:4435 camlib.py:4686 camlib.py:5740 camlib.py:6177 msgid "Starting G-Code for tool with diameter" msgstr "" #: camlib.py:3599 camlib.py:4562 camlib.py:4809 camlib.py:7161 camlib.py:7438 camlib.py:7587 msgid "G91 coordinates not implemented" msgstr "" #: camlib.py:3608 msgid "Finished G-Code generation for tool:" msgstr "" #: camlib.py:3733 camlib.py:5613 camlib.py:6035 msgid "Cut_Z parameter is None or zero. Most likely a bad combinations of other parameters." msgstr "" #: camlib.py:3741 camlib.py:5621 camlib.py:6044 msgid "" "The Cut Z parameter has positive value. It is the depth value to cut into material.\n" "The Cut Z parameter needs to have a negative value, assuming it is a typo therefore the " "app will convert the value to negative.Check the resulting CNC code (Gcode etc)." msgstr "" #: camlib.py:3749 camlib.py:4350 camlib.py:4609 camlib.py:5629 camlib.py:6052 msgid "The Cut Z parameter is zero. There will be no cut, skipping file" msgstr "" #: camlib.py:3754 camlib.py:5634 camlib.py:6058 msgid "Travel Z parameter is None or zero." msgstr "" #: camlib.py:3759 camlib.py:5639 camlib.py:6064 msgid "" "The Travel Z parameter has negative value. It is the height value to travel between " "cuts.\n" "The Z Travel parameter needs to have a positive value, assuming it is a typo therefore " "the app will convert the value to positive.Check the resulting CNC code (Gcode etc)." msgstr "" #: camlib.py:3767 camlib.py:5647 camlib.py:6072 msgid "The Z Travel parameter is zero. This is dangerous, skipping file" msgstr "" #: camlib.py:4047 camlib.py:5482 camlib.py:5813 camlib.py:6258 msgid "Finished G-Code generation" msgstr "" #: camlib.py:4047 camlib.py:5813 camlib.py:6258 camlib.py:6381 msgid "paths traced" msgstr "" #: camlib.py:4106 msgid "" "The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y) \n" "but now there is only one value, not two. " msgstr "" #: camlib.py:4118 camlib.py:5576 camlib.py:6000 msgid "" "The End Move X,Y field in Edit -> Preferences has to be in the format (x, y) but now " "there is only one value, not two." msgstr "" #: camlib.py:4238 msgid "Failed. Drill points inside the exclusion zones." msgstr "" #: camlib.py:5599 msgid "" "The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y) \n" "but now there is only one value, not two." msgstr "" #: camlib.py:5868 msgid "Trying to generate a CNC Job from a Geometry object without solid_geometry." msgstr "" #: camlib.py:5919 msgid "" "The Tool Offset value is too negative to use for the current_geometry.\n" "Raise the value (in module) and try again." msgstr "" #: camlib.py:6289 msgid "There is no tool data in the SolderPaste geometry." msgstr "" #: camlib.py:6381 msgid "Finished SolderPaste G-Code generation" msgstr "" #: camlib.py:6733 msgid "Parsing GCode file. Number of lines" msgstr "" #: camlib.py:6845 msgid "Creating Geometry from the parsed GCode file. " msgstr "" #: camlib.py:6902 msgid "Parsing GCode file for tool diameter" msgstr "" #: camlib.py:6903 msgid "Number of lines" msgstr "" #: camlib.py:6992 msgid "Creating Geometry from the parsed GCode file for tool diameter" msgstr "" #: camlib.py:7756 msgid "G91 coordinates not implemented ..." msgstr "" #: defaults.py:954 defaults.py:1125 msgid "Failed to parse defaults file." msgstr "" #: tclCommands/TclCommandBbox.py:75 tclCommands/TclCommandNregions.py:74 msgid "Expected GerberObject or GeometryObject, got" msgstr "" #: tclCommands/TclCommandBounds.py:67 tclCommands/TclCommandBounds.py:71 msgid "Expected a list of objects names separated by comma. Got" msgstr "" #: tclCommands/TclCommandBounds.py:81 msgid "TclCommand Bounds done." msgstr "" #: tclCommands/TclCommandBuffer.py:97 msgid "Expected -dist " msgstr "" #: tclCommands/TclCommandCopperClear.py:276 msgid "Expected either -box or -all." msgstr "" #: tclCommands/TclCommandDrillcncjob.py:210 msgid "Tool_nr" msgstr "" #: tclCommands/TclCommandDrillcncjob.py:210 msgid "Drills_Nr" msgstr "" #: tclCommands/TclCommandDrillcncjob.py:210 msgid "Slots_Nr" msgstr "" #: tclCommands/TclCommandGeoCutout.py:142 msgid "The name of the object for which cutout is done is missing. Add it and retry." msgstr "" #: tclCommands/TclCommandGeoCutout.py:186 msgid "" "Gaps value can be only one of: 'none', 'lr', 'tb', '2lr', '2tb', 4 or 8.\n" "Fill in a correct value and retry." msgstr "" #: tclCommands/TclCommandGeoCutout.py:218 msgid "Cancelled. Object type is not supported." msgstr "" #: tclCommands/TclCommandHelp.py:75 msgid "Available commands:" msgstr "" #: tclCommands/TclCommandHelp.py:115 msgid "Type help for usage." msgstr "" #: tclCommands/TclCommandHelp.py:115 msgid "Example: help open_gerber" msgstr "" #: tclCommands/TclCommandPaint.py:231 tclCommands/TclCommandPaint.py:238 msgid "Expected a tuple value like -single 3.2,0.1." msgstr "" #: tclCommands/TclCommandPaint.py:263 tclCommands/TclCommandPaint.py:264 msgid "Expected -box ." msgstr "" #: tclCommands/TclCommandPaint.py:288 msgid "" "None of the following args: 'box', 'single', 'all' were used.\n" "Paint failed." msgstr "" #: tclCommands/TclCommandScale.py:137 tclCommands/TclCommandSkew.py:189 msgid "" "Expected -origin or -origin or -origin
or - origin 3.0,4.2." msgstr "" #: tclCommands/TclCommandSetOrigin.py:95 msgid "Expected a pair of (x, y) coordinates. Got" msgstr "" #: tclCommands/TclCommandSetOrigin.py:120 msgid "Origin set by offsetting all loaded objects with " msgstr "" #: tclCommands/TclCommandSubtractRectangle.py:62 msgid "No Geometry name in args. Provide a name and try again." msgstr "" #~ msgid "" #~ "How much (fraction) of the tool width to overlap each tool pass.\n" #~ "Example:\n" #~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n" #~ "\n" #~ "Adjust the value starting with lower values\n" #~ "and increasing it if areas that should be painted are still \n" #~ "not painted.\n" #~ "Lower values = faster processing, faster execution on PCB.\n" #~ "Higher values = slow processing and slow execution on CNC\n" #~ "due of too many paths." #~ msgstr "" #~ "How much (fraction) of the tool width to overlap each tool pass.\n" #~ "Example:\n" #~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n" #~ "\n" #~ "Adjust the value starting with lower values\n" #~ "and increasing it if areas that should be painted are still \n" #~ "not painted.\n" #~ "Lower values = faster processing, faster execution on PCB.\n" #~ "Higher values = slow processing and slow execution on CNC\n" #~ "due of too many paths." #~| msgid "z_toolchange = Z coord for Toolchange" #~ msgid "z_cut = Z coord for Toolchange" #~ msgstr "z_cut = Z coord for Toolchange" #~| msgid "z_toolchange = Z coord for Toolchange" #~ msgid "z_move = Z coord for Toolchange" #~ msgstr "z_move = Z coord for Toolchange" #~ msgid "%s/Project_%s" #~ msgstr "%s/Project_%s" #~ msgid "plugin_tab" #~ msgstr "plugin_tab"