# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR ORGANIZATION # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: \n" "POT-Creation-Date: 2022-05-17 14:37+0300\n" "PO-Revision-Date: 2019-03-25 15:08+0200\n" "Last-Translator: \n" "Language-Team: \n" "Language: en\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "Generated-By: pygettext.py 1.5\n" "X-Generator: Poedit 3.0.1\n" "X-Poedit-Basepath: ..\n" "X-Poedit-SearchPath-0: .\n" "X-Poedit-SearchPathExcluded-0: build\n" "X-Poedit-SearchPathExcluded-1: doc\n" "X-Poedit-SearchPathExcluded-2: tests\n" "X-Poedit-SearchPathExcluded-3: venv\n" #: Bookmark.py:57 Bookmark.py:84 msgid "Title" msgstr "" #: Bookmark.py:58 Bookmark.py:89 msgid "Web Link" msgstr "" #: Bookmark.py:62 msgid "" "Index.\n" "The rows in gray color will populate the Bookmarks menu.\n" "The number of gray colored rows is set in Preferences." msgstr "" #: Bookmark.py:66 msgid "" "Description of the link that is set as an menu action.\n" "Try to keep it short because it is installed as a menu item." msgstr "" #: Bookmark.py:69 msgid "Web Link. E.g: https://your_website.org " msgstr "" #: Bookmark.py:78 msgid "New Bookmark" msgstr "" #: Bookmark.py:99 msgid "Add Entry" msgstr "" #: Bookmark.py:100 msgid "Remove Entry" msgstr "" #: Bookmark.py:101 msgid "Export List" msgstr "" #: Bookmark.py:102 msgid "Import List" msgstr "" #: Bookmark.py:192 msgid "Title entry is empty." msgstr "" #: Bookmark.py:201 msgid "Web link entry is empty." msgstr "" #: Bookmark.py:209 msgid "Either the Title or the Weblink already in the table." msgstr "" #: Bookmark.py:229 msgid "Bookmark added." msgstr "" #: Bookmark.py:245 appMain.py:3920 appMain.py:3962 msgid "Backup Site" msgstr "" #: Bookmark.py:246 msgid "This bookmark can not be removed" msgstr "" #: Bookmark.py:277 msgid "Bookmark removed." msgstr "" #: Bookmark.py:293 msgid "Export Bookmarks" msgstr "" #: Bookmark.py:295 appGUI/MainGUI.py:659 msgid "Bookmarks" msgstr "" #: Bookmark.py:302 Bookmark.py:344 appDatabase.py:2129 appDatabase.py:2175 #: appEditors/AppExcEditor.py:2075 appEditors/AppExcEditor.py:2143 #: appEditors/AppExcEditor.py:2165 appEditors/AppExcEditor.py:2426 #: appEditors/AppExcEditor.py:2458 appEditors/AppGeoEditor.py:2833 #: appEditors/AppGeoEditor.py:2859 appEditors/AppGeoEditor.py:2885 #: appEditors/AppGeoEditor.py:4540 appEditors/AppGerberEditor.py:5038 #: appEditors/AppGerberEditor.py:7261 appEditors/AppTextEditor.py:282 #: appEditors/geo_plugins/GeoPaintPlugin.py:103 #: appEditors/geo_plugins/GeoTransformationPlugin.py:130 appGUI/MainGUI.py:3588 #: appGUI/MainGUI.py:3820 appGUI/MainGUI.py:4053 appGUI/MainGUI.py:4313 appMain.py:1732 #: appMain.py:3113 appMain.py:5066 appMain.py:5486 appMain.py:9596 appMain.py:9634 #: appMain.py:9677 appMain.py:9702 appMain.py:9741 appMain.py:9765 appMain.py:9816 #: appMain.py:9854 appMain.py:9900 appMain.py:9942 appMain.py:9984 appMain.py:10025 #: appMain.py:10067 appMain.py:10112 appMain.py:10170 appMain.py:10202 appMain.py:10232 #: appMain.py:10454 appMain.py:10491 appMain.py:10534 appMain.py:10610 appMain.py:10669 #: appMain.py:10950 appMain.py:10985 appObjects/ObjectCollection.py:155 #: appPlugins/ToolCutOut.py:2075 appPlugins/ToolDistance.py:625 appPlugins/ToolFilm.py:411 #: appPlugins/ToolFilm.py:561 appPlugins/ToolImage.py:180 appPlugins/ToolImage.py:206 #: appPlugins/ToolLevelling.py:1572 appPlugins/ToolMarkers.py:802 #: appPlugins/ToolMarkers.py:911 appPlugins/ToolMove.py:277 appPlugins/ToolNCC.py:1192 #: appPlugins/ToolNCC.py:1271 appPlugins/ToolNCC.py:1329 appPlugins/ToolNCC.py:3965 #: appPlugins/ToolPaint.py:837 appPlugins/ToolPaint.py:923 appPlugins/ToolPaint.py:983 #: appPlugins/ToolPaint.py:2846 appPlugins/ToolPcbWizard.py:213 #: appPlugins/ToolPcbWizard.py:236 appPlugins/ToolQRCode.py:604 appPlugins/ToolQRCode.py:653 #: appPlugins/ToolSolderPaste.py:584 appPlugins/ToolSolderPaste.py:922 #: appPlugins/ToolSolderPaste.py:978 msgid "Cancelled." msgstr "" #: Bookmark.py:310 appDatabase.py:2137 appEditors/AppTextEditor.py:337 appMain.py:3121 #: appMain.py:10920 appMain.py:11128 appMain.py:11263 appMain.py:11329 appMain.py:12385 #: appObjects/CNCJobObject.py:762 appObjects/CNCJobObject.py:1184 appPlugins/ToolFilm.py:973 #: appPlugins/ToolLevelling.py:1494 appPlugins/ToolLevelling.py:1686 #: appPlugins/ToolSolderPaste.py:1212 msgid "" "Permission denied, saving not possible.\n" "Most likely another app is holding the file open and not accessible." msgstr "" #: Bookmark.py:321 Bookmark.py:351 appDatabase.py:1728 appDatabase.py:2148 #: appDatabase.py:2182 appMain.py:3132 appMain.py:6663 appPlugins/ToolNCC.py:1202 #: appPlugins/ToolPaint.py:847 defaults.py:948 defaults.py:1119 msgid "Could not load the file." msgstr "" #: Bookmark.py:331 msgid "Failed to write bookmarks to file." msgstr "" #: Bookmark.py:333 msgid "Exported bookmarks to" msgstr "" #: Bookmark.py:339 msgid "Import Bookmarks" msgstr "" #: Bookmark.py:358 msgid "Imported Bookmarks from" msgstr "" #: appCommon/Common.py:49 msgid "The user requested a graceful exit of the current task." msgstr "" #: appCommon/Common.py:302 appPlugins/ToolCopperThieving.py:378 appPlugins/ToolFollow.py:213 #: appPlugins/ToolIsolation.py:1662 appPlugins/ToolNCC.py:1572 appPlugins/ToolPaint.py:1197 msgid "Click the start point of the area." msgstr "" #: appCommon/Common.py:361 appPlugins/ToolFollow.py:422 appPlugins/ToolNCC.py:1633 #: appPlugins/ToolPaint.py:1347 msgid "Click the end point of the area." msgstr "" #: appCommon/Common.py:367 appCommon/Common.py:471 appPlugins/ToolCopperThieving.py:422 #: appPlugins/ToolFollow.py:428 appPlugins/ToolFollow.py:479 #: appPlugins/ToolIsolation.py:2733 appPlugins/ToolIsolation.py:2785 #: appPlugins/ToolNCC.py:1637 appPlugins/ToolNCC.py:1689 appPlugins/ToolPaint.py:1353 #: appPlugins/ToolPaint.py:1404 msgid "Zone added. Click to start adding next zone or right click to finish." msgstr "" #: appCommon/Common.py:415 appEditors/AppGeoEditor.py:1297 appEditors/AppGeoEditor.py:1446 #: appEditors/AppGeoEditor.py:1508 appEditors/AppGeoEditor.py:1659 #: appEditors/AppGerberEditor.py:1029 appEditors/AppGerberEditor.py:1409 #: appPlugins/ToolFollow.py:450 appPlugins/ToolIsolation.py:2756 appPlugins/ToolNCC.py:1660 #: appPlugins/ToolPaint.py:1375 msgid "Click on next Point or click right mouse button to complete ..." msgstr "" #: appCommon/Common.py:502 msgid "Exclusion areas added. Checking overlap with the object geometry ..." msgstr "" #: appCommon/Common.py:508 msgid "Failed. Exclusion areas intersects the object geometry ..." msgstr "" #: appCommon/Common.py:511 msgid "Exclusion areas added." msgstr "" #: appCommon/Common.py:515 appCommon/Common.py:645 appCommon/Common.py:702 msgid "Generate the CNC Job object." msgstr "" #: appCommon/Common.py:515 msgid "With Exclusion areas." msgstr "" #: appCommon/Common.py:550 msgid "Cancelled. Area exclusion drawing was interrupted." msgstr "" #: appCommon/Common.py:655 appCommon/Common.py:705 msgid "All exclusion zones deleted." msgstr "" #: appCommon/Common.py:696 msgid "Selected exclusion zones deleted." msgstr "" #: appDatabase.py:28 appEditors/AppGeoEditor.py:118 appEditors/AppGeoEditor.py:1486 #: appEditors/AppGeoEditor.py:1490 appEditors/AppGeoEditor.py:1526 #: appEditors/AppGeoEditor.py:1862 appGUI/MainGUI.py:1833 appPlugins/ToolMilling.py:4334 msgid "Path" msgstr "" #: appDatabase.py:28 appPlugins/ToolMilling.py:4334 msgid "In" msgstr "" #: appDatabase.py:28 appPlugins/ToolMilling.py:4334 msgid "Out" msgstr "" #: appDatabase.py:28 appGUI/MainGUI.py:933 appGUI/MainGUI.py:1818 appMain.py:9146 #: appPlugins/ToolMilling.py:4334 appPlugins/ToolMilling.py:4342 msgid "Custom" msgstr "" #: appDatabase.py:29 appEditors/appGCodeEditor.py:192 appObjects/CNCJobObject.py:264 #: appObjects/GeometryObject.py:125 appPlugins/ToolMilling.py:4446 msgid "Roughing" msgstr "" #: appDatabase.py:29 appEditors/appGCodeEditor.py:192 appObjects/CNCJobObject.py:264 #: appObjects/GeometryObject.py:125 appPlugins/ToolMilling.py:4446 msgid "Finishing" msgstr "" #: appDatabase.py:29 appDatabase.py:271 appDatabase.py:593 appDatabase.py:1761 #: appDatabase.py:2226 appDatabase.py:2409 appEditors/appGCodeEditor.py:192 #: appGUI/MainGUI.py:1157 appGUI/MainGUI.py:2551 appGUI/MainGUI.py:5016 #: appObjects/CNCJobObject.py:264 appObjects/GeometryObject.py:125 #: appPlugins/ToolIsolation.py:191 appPlugins/ToolIsolation.py:3346 #: appPlugins/ToolMilling.py:4446 appPlugins/ToolNCC.py:4290 msgid "Isolation" msgstr "" #: appDatabase.py:29 appEditors/appGCodeEditor.py:192 appObjects/CNCJobObject.py:264 #: appObjects/GeometryObject.py:125 appPlugins/ToolMilling.py:4446 msgid "Polishing" msgstr "" #: appDatabase.py:38 appGUI/preferences/gerber/GerberGenPrefGroupUI.py:378 msgid "ID" msgstr "" #: appDatabase.py:38 appDatabase.py:203 appEditors/AppGeoEditor.py:5302 #: appGUI/ObjectUI.py:222 appGUI/ObjectUI.py:617 appGUI/ObjectUI.py:907 #: appGUI/ObjectUI.py:1232 appGUI/ObjectUI.py:1497 appGUI/ObjectUI.py:1560 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:376 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:379 appMain.py:8653 #: appPlugins/ToolFiducials.py:965 msgid "Name" msgstr "" #: appDatabase.py:38 appDatabase.py:265 appPlugins/ToolDblSided.py:728 #: appPlugins/ToolPanelize.py:1173 appPlugins/ToolSub.py:833 appPlugins/ToolSub.py:895 msgid "Target" msgstr "" #: appDatabase.py:38 appDatabase.py:216 appEditors/AppExcEditor.py:4025 #: appEditors/AppExcEditor.py:5215 appGUI/ObjectUI.py:705 #: appObjects/AppObjectTemplate.py:781 appObjects/AppObjectTemplate.py:847 #: appPlugins/ToolDrilling.py:2443 appPlugins/ToolIsolation.py:3429 #: appPlugins/ToolMilling.py:4032 appPlugins/ToolNCC.py:4127 appPlugins/ToolPaint.py:3009 #: appPlugins/ToolPcbWizard.py:425 appPlugins/ToolReport.py:430 appPlugins/ToolReport.py:499 #: appPlugins/ToolSolderPaste.py:1295 msgid "Diameter" msgstr "" #: appDatabase.py:77 msgid "Tool Description" msgstr "" #: appDatabase.py:92 msgid "Milling Parameters" msgstr "" #: appDatabase.py:105 msgid "NCC Parameters" msgstr "" #: appDatabase.py:118 msgid "Paint Parameters" msgstr "" #: appDatabase.py:131 msgid "Isolation Parameters" msgstr "" #: appDatabase.py:144 msgid "Drilling Parameters" msgstr "" #: appDatabase.py:157 msgid "Cutout Parameters" msgstr "" #: appDatabase.py:205 msgid "" "Tool name.\n" "This is not used in the app, it's function\n" "is to serve as a note for the user." msgstr "" #: appDatabase.py:218 appDatabase.py:1181 appEditors/exc_plugins/ExcDrillArrayPlugin.py:113 #: appEditors/exc_plugins/ExcDrillPlugin.py:120 #: appEditors/exc_plugins/ExcResizePlugin.py:112 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:111 #: appEditors/exc_plugins/ExcSlotPlugin.py:120 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:206 appPlugins/ToolCalculators.py:637 msgid "Tool Diameter" msgstr "" #: appDatabase.py:229 msgid "Diameter Tolerance" msgstr "" #: appDatabase.py:231 msgid "" "Tool tolerance. This tool will be used if the desired tool diameter\n" "is within the tolerance specified here." msgstr "" #: appDatabase.py:237 msgid "Min" msgstr "" #: appDatabase.py:239 msgid "Set the tool tolerance minimum." msgstr "" #: appDatabase.py:251 msgid "Max" msgstr "" #: appDatabase.py:253 msgid "Set the tool tolerance maximum." msgstr "" #: appDatabase.py:267 msgid "The kind of Application Tool where this tool is to be used." msgstr "" #: appDatabase.py:271 appDatabase.py:1758 appDatabase.py:1799 appDatabase.py:2210 #: appDatabase.py:2406 appGUI/MainGUI.py:1574 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:20 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:23 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:22 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:23 appMain.py:8651 msgid "General" msgstr "" #: appDatabase.py:271 appDatabase.py:1759 appDatabase.py:2213 appDatabase.py:2407 #: appGUI/MainGUI.py:1148 appGUI/MainGUI.py:2542 appGUI/MainGUI.py:5020 #: appGUI/ObjectUI.py:762 appGUI/ObjectUI.py:1038 appPlugins/ToolMilling.py:76 #: appPlugins/ToolMilling.py:217 appPlugins/ToolMilling.py:3902 msgid "Milling" msgstr "" #: appDatabase.py:271 appDatabase.py:1760 appDatabase.py:2218 appDatabase.py:2408 #: appGUI/MainGUI.py:1146 appGUI/MainGUI.py:2540 appGUI/ObjectUI.py:754 #: appPlugins/ToolDrilling.py:33 appPlugins/ToolDrilling.py:176 #: appPlugins/ToolDrilling.py:1176 appPlugins/ToolDrilling.py:2355 msgid "Drilling" msgstr "" #: appDatabase.py:271 appDatabase.py:1762 appDatabase.py:2234 appDatabase.py:2410 #: appEditors/geo_plugins/GeoPaintPlugin.py:220 appEditors/geo_plugins/GeoPaintPlugin.py:335 #: appGUI/MainGUI.py:771 appGUI/MainGUI.py:1163 appGUI/MainGUI.py:1852 #: appGUI/MainGUI.py:2557 appGUI/ObjectUI.py:1046 appPlugins/ToolPaint.py:195 #: appPlugins/ToolPaint.py:879 appPlugins/ToolPaint.py:2898 msgid "Paint" msgstr "" #: appDatabase.py:271 appDatabase.py:1763 appDatabase.py:2242 appDatabase.py:2411 #: appGUI/MainGUI.py:1161 appGUI/MainGUI.py:2555 appGUI/ObjectUI.py:411 #: appGUI/ObjectUI.py:1056 appPlugins/ToolNCC.py:195 appPlugins/ToolNCC.py:1228 #: appPlugins/ToolNCC.py:4015 msgid "NCC" msgstr "" #: appDatabase.py:271 appDatabase.py:1764 appDatabase.py:2250 appDatabase.py:2412 #: appGUI/MainGUI.py:1168 appGUI/MainGUI.py:2562 appGUI/ObjectUI.py:382 #: appPlugins/ToolCutOut.py:170 appPlugins/ToolCutOut.py:466 appPlugins/ToolCutOut.py:2242 msgid "Cutout" msgstr "" #: appDatabase.py:285 appEditors/appGCodeEditor.py:812 appGUI/ObjectUI.py:990 #: appGUI/ObjectUI.py:1388 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:444 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:148 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:330 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:464 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:321 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:285 appPlugins/ToolCutOut.py:2615 #: appPlugins/ToolFollow.py:734 appPlugins/ToolIsolation.py:3580 #: appPlugins/ToolIsolation.py:3948 appPlugins/ToolMilling.py:4404 #: appPlugins/ToolNCC.py:4127 appPlugins/ToolNCC.py:4563 appPlugins/ToolPaint.py:3009 #: appPlugins/ToolPaint.py:3320 msgid "Shape" msgstr "" #: appDatabase.py:287 appGUI/ObjectUI.py:1014 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:150 appPlugins/ToolIsolation.py:3582 #: appPlugins/ToolMilling.py:4406 appPlugins/ToolNCC.py:4145 appPlugins/ToolPaint.py:3027 msgid "" "Tool Shape. \n" "Can be:\n" "C1 ... C4 = circular tool with x flutes\n" "B = ball tip milling tool\n" "V = v-shape milling tool\n" "L = laser" msgstr "" #: appDatabase.py:303 msgid "V-Dia" msgstr "" #: appDatabase.py:305 msgid "" "V-Dia.\n" "Diameter of the tip for V-Shape Tools." msgstr "" #: appDatabase.py:317 msgid "V-Angle" msgstr "" #: appDatabase.py:319 msgid "" "V-Agle.\n" "Angle at the tip for the V-Shape Tools." msgstr "" #: appDatabase.py:336 appEditors/appGCodeEditor.py:812 appGUI/ObjectUI.py:990 #: appGUI/ObjectUI.py:1388 appPlugins/ToolMilling.py:4434 msgid "Job" msgstr "" #: appDatabase.py:339 appPlugins/ToolMilling.py:4437 msgid "" "- Isolation -> informative - lower Feedrate as it uses a milling bit with a fine tip.\n" "- Roughing -> informative - lower Feedrate and multiDepth cut.\n" "- Finishing -> informative - higher Feedrate, without multiDepth.\n" "- Polish -> adds a painting sequence over the whole area of the object" msgstr "" #: appDatabase.py:354 msgid "Tool Offset" msgstr "" #: appDatabase.py:356 msgid "" "Tool Offset.\n" "Can be of a few types:\n" "Path = zero offset\n" "In = offset inside by half of tool diameter\n" "Out = offset outside by half of tool diameter\n" "Custom = custom offset using the Custom Offset value" msgstr "" #: appDatabase.py:371 msgid "Custom Offset" msgstr "" #: appDatabase.py:373 msgid "" "Custom Offset.\n" "A value to be used as offset from the current path." msgstr "" #: appDatabase.py:390 appDatabase.py:889 appEditors/appGCodeEditor.py:823 #: appGUI/ObjectUI.py:1398 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:38 #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:75 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:67 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:54 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:96 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:84 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:97 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:100 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:108 appPlugins/ToolCalculators.py:626 #: appPlugins/ToolCutOut.py:2422 appPlugins/ToolDrilling.py:2514 #: appPlugins/ToolIsolation.py:3647 appPlugins/ToolMilling.py:1428 #: appPlugins/ToolMilling.py:4550 msgid "Cut Z" msgstr "" #: appDatabase.py:392 msgid "" "Cutting Depth.\n" "The depth at which to cut into material." msgstr "" #: appDatabase.py:404 appDatabase.py:923 msgid "MultiDepth" msgstr "" #: appDatabase.py:406 msgid "" "Multi Depth.\n" "Selecting this will allow cutting in multiple passes,\n" "each pass adding a DPP parameter depth." msgstr "" #: appDatabase.py:417 appDatabase.py:939 msgid "DPP" msgstr "" #: appDatabase.py:419 appDatabase.py:941 msgid "" "DPP. Depth per Pass.\n" "The value used to cut into material on each pass." msgstr "" #: appDatabase.py:431 appDatabase.py:955 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:93 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:168 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:126 appPlugins/ToolDrilling.py:1560 #: appPlugins/ToolDrilling.py:2556 appPlugins/ToolMilling.py:3596 #: appPlugins/ToolMilling.py:4592 appPlugins/ToolSolderPaste.py:1380 msgid "Travel Z" msgstr "" #: appDatabase.py:433 msgid "" "Clearance Height.\n" "Height at which the milling bit will travel between cuts,\n" "above the surface of the material, avoiding all fixtures." msgstr "" #: appDatabase.py:446 msgid "ExtraCut" msgstr "" #: appDatabase.py:448 msgid "" "Extra Cut.\n" "If checked, after a isolation is finished an extra cut\n" "will be added where the start and end of isolation meet\n" "such as that this point is covered by this extra cut to\n" "ensure a complete isolation." msgstr "" #: appDatabase.py:461 msgid "E-Cut Length" msgstr "" #: appDatabase.py:463 msgid "" "Extra Cut length.\n" "If checked, after a isolation is finished an extra cut\n" "will be added where the start and end of isolation meet\n" "such as that this point is covered by this extra cut to\n" "ensure a complete isolation. This is the length of\n" "the extra cut." msgstr "" #: appDatabase.py:484 appGUI/preferences/tools/ToolsMillPrefGroupUI.py:198 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:163 #: appPlugins/ToolMilling.py:4610 msgid "Feedrate X-Y" msgstr "" #: appDatabase.py:486 msgid "" "Feedrate X-Y. Feedrate\n" "The speed on XY plane used while cutting into material." msgstr "" #: appDatabase.py:498 appDatabase.py:978 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:154 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:213 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:190 #: appPlugins/ToolDrilling.py:2573 appPlugins/ToolMilling.py:4628 msgid "Feedrate Z" msgstr "" #: appDatabase.py:500 msgid "" "Feedrate Z\n" "The speed on Z plane." msgstr "" #: appDatabase.py:512 msgid "FR Rapids" msgstr "" #: appDatabase.py:514 msgid "" "FR Rapids. Feedrate Rapids\n" "Speed used while moving as fast as possible.\n" "This is used only by some devices that can't use\n" "the G0 g-code command. Mostly 3D printers." msgstr "" #: appDatabase.py:533 appDatabase.py:1018 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:229 appPlugins/ToolDrilling.py:1578 #: appPlugins/ToolDrilling.py:2612 appPlugins/ToolMilling.py:3614 #: appPlugins/ToolMilling.py:4698 appPlugins/ToolSolderPaste.py:1558 #: appPlugins/ToolSolderPaste.py:1595 msgid "Spindle speed" msgstr "" #: appDatabase.py:535 msgid "" "Spindle Speed.\n" "If it's left empty it will not be used.\n" "The speed of the spindle in RPM." msgstr "" #: appDatabase.py:548 appDatabase.py:1033 appPlugins/ToolDrilling.py:2643 #: appPlugins/ToolMilling.py:4729 appPlugins/ToolSolderPaste.py:1572 #: appPlugins/ToolSolderPaste.py:1609 msgid "Dwell" msgstr "" #: appDatabase.py:550 appDatabase.py:1035 msgid "" "Dwell.\n" "Check this if a delay is needed to allow\n" "the spindle motor to reach its set speed." msgstr "" #: appDatabase.py:561 appDatabase.py:1046 msgid "Dwelltime" msgstr "" #: appDatabase.py:563 appDatabase.py:1048 msgid "" "Dwell Time.\n" "A delay used to allow the motor spindle reach its set speed." msgstr "" #: appDatabase.py:583 appPlugins/ToolNCC.py:4280 msgid "Operation" msgstr "" #: appDatabase.py:585 appPlugins/ToolNCC.py:4282 msgid "" "The 'Operation' can be:\n" "- Isolation -> will ensure that the non-copper clearing is always complete.\n" "If it's not successful then the non-copper clearing will fail, too.\n" "- Clear -> the regular non-copper clearing." msgstr "" #: appDatabase.py:592 appEditors/AppGerberEditor.py:6619 #: appEditors/exc_plugins/ExcCopyPlugin.py:153 appEditors/geo_plugins/GeoCopyPlugin.py:151 #: appEditors/geo_plugins/GeoPathPlugin.py:146 appPlugins/ToolNCC.py:4289 msgid "Clear" msgstr "" #: appDatabase.py:601 appDatabase.py:842 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:55 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:203 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:578 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:136 appPlugins/ToolIsolation.py:3712 #: appPlugins/ToolMilling.py:4283 appPlugins/ToolNCC.py:4298 msgid "Milling Type" msgstr "" #: appDatabase.py:603 appDatabase.py:611 appDatabase.py:844 appDatabase.py:852 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:57 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:205 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:213 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:138 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:146 appPlugins/ToolIsolation.py:3714 #: appPlugins/ToolIsolation.py:3722 appPlugins/ToolNCC.py:4300 appPlugins/ToolNCC.py:4308 msgid "" "Milling type:\n" "- climb / best for precision milling and to reduce tool usage\n" "- conventional / useful when there is no backlash compensation" msgstr "" #: appDatabase.py:608 appDatabase.py:849 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:61 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:210 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:143 appPlugins/ToolIsolation.py:3719 #: appPlugins/ToolNCC.py:4305 msgid "Climb" msgstr "" #: appDatabase.py:609 appDatabase.py:850 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:211 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144 appPlugins/ToolIsolation.py:3720 #: appPlugins/ToolNCC.py:4306 msgid "Conventional" msgstr "" #: appDatabase.py:621 appDatabase.py:727 appDatabase.py:827 appDatabase.py:1076 #: appEditors/geo_plugins/GeoPaintPlugin.py:257 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:254 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:532 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:612 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:168 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:151 appPlugins/ToolDrilling.py:2691 #: appPlugins/ToolIsolation.py:3697 appPlugins/ToolMilling.py:4364 #: appPlugins/ToolMilling.py:4467 appPlugins/ToolNCC.py:4321 appPlugins/ToolPaint.py:3144 msgid "Overlap" msgstr "" #: appDatabase.py:623 appDatabase.py:729 appEditors/geo_plugins/GeoPaintPlugin.py:259 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:614 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:170 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:153 appPlugins/ToolMilling.py:4366 #: appPlugins/ToolNCC.py:4323 appPlugins/ToolPaint.py:3146 msgid "" "How much (percentage) of the tool width to overlap each tool pass.\n" "Adjust the value starting with lower values\n" "and increasing it if areas that should be processed are still \n" "not processed.\n" "Lower values = faster processing, faster execution on CNC.\n" "Higher values = slow processing and slow execution on CNC\n" "due of too many paths." msgstr "" #: appDatabase.py:642 appDatabase.py:1118 appEditors/geo_plugins/GeoPaintPlugin.py:277 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:70 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:277 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:296 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:56 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:41 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:49 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:122 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:308 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:520 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:188 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:171 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:67 #: appPlugins/ToolCopperThieving.py:1318 appPlugins/ToolCopperThieving.py:1600 #: appPlugins/ToolCutOut.py:2463 appPlugins/ToolCutOut.py:2776 #: appPlugins/ToolExtract.py:1380 appPlugins/ToolFiducials.py:1073 #: appPlugins/ToolInvertGerber.py:249 appPlugins/ToolInvertGerber.py:257 #: appPlugins/ToolMilling.py:4454 appPlugins/ToolNCC.py:4365 appPlugins/ToolNCC.py:4469 #: appPlugins/ToolSolderPaste.py:1360 msgid "Margin" msgstr "" #: appDatabase.py:644 appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:72 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:58 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:123 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:136 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:522 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:190 appPlugins/ToolCopperThieving.py:1320 #: appPlugins/ToolFiducials.py:1075 appPlugins/ToolMilling.py:4456 #: appPlugins/ToolNCC.py:4367 appPlugins/ToolNCC.py:4471 msgid "Bounding box margin." msgstr "" #: appDatabase.py:655 appDatabase.py:763 appEditors/geo_plugins/GeoPaintPlugin.py:291 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:104 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:105 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:55 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:546 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:201 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:186 appPlugins/ToolExtract.py:1141 #: appPlugins/ToolLevelling.py:1904 appPlugins/ToolMilling.py:4482 #: appPlugins/ToolNCC.py:4342 appPlugins/ToolPaint.py:3180 #: appPlugins/ToolPunchGerber.py:2136 msgid "Method" msgstr "" #: appDatabase.py:657 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:203 #: appPlugins/ToolNCC.py:4344 msgid "" "Algorithm for copper clearing:\n" "- Standard: Fixed step inwards.\n" "- Seed-based: Outwards from seed.\n" "- Line-based: Parallel lines." msgstr "" #: appDatabase.py:665 appDatabase.py:777 appEditors/geo_plugins/GeoPaintPlugin.py:305 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:556 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolMilling.py:4492 #: appPlugins/ToolNCC.py:4357 appPlugins/ToolPaint.py:3194 msgid "Standard" msgstr "" #: appDatabase.py:665 appDatabase.py:777 appEditors/geo_plugins/GeoPaintPlugin.py:89 #: appEditors/geo_plugins/GeoPaintPlugin.py:180 appEditors/geo_plugins/GeoPaintPlugin.py:305 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:556 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolMilling.py:4492 #: appPlugins/ToolNCC.py:4357 appPlugins/ToolPaint.py:3194 msgid "Seed" msgstr "" #: appDatabase.py:665 appDatabase.py:777 appEditors/geo_plugins/GeoPaintPlugin.py:185 #: appEditors/geo_plugins/GeoPaintPlugin.py:305 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:556 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appParsers/ParseGerber.py:446 #: appParsers/ParseHPGL2.py:200 appPlugins/ToolImage.py:745 appPlugins/ToolMilling.py:4492 #: appPlugins/ToolNCC.py:4357 appPlugins/ToolPaint.py:3194 msgid "Lines" msgstr "" #: appDatabase.py:665 appDatabase.py:777 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolNCC.py:4357 #: appPlugins/ToolPaint.py:3194 msgid "Combo" msgstr "" #: appDatabase.py:673 appDatabase.py:788 appEditors/geo_plugins/GeoPaintPlugin.py:312 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:633 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:223 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:212 appPlugins/ToolLevelling.py:1123 #: appPlugins/ToolLevelling.py:1145 appPlugins/ToolLevelling.py:1993 #: appPlugins/ToolLevelling.py:2016 appPlugins/ToolMilling.py:4385 #: appPlugins/ToolNCC.py:4378 appPlugins/ToolNCC.py:4482 appPlugins/ToolPaint.py:3205 msgid "Connect" msgstr "" #: appDatabase.py:677 appDatabase.py:791 appEditors/geo_plugins/GeoPaintPlugin.py:314 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:636 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:225 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:214 appPlugins/ToolMilling.py:4388 #: appPlugins/ToolNCC.py:4382 appPlugins/ToolNCC.py:4484 appPlugins/ToolPaint.py:3208 msgid "" "Draw lines between resulting\n" "segments to minimize tool lifts." msgstr "" #: appDatabase.py:683 appDatabase.py:795 appEditors/geo_plugins/GeoPaintPlugin.py:322 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:232 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:219 appPlugins/ToolNCC.py:4388 #: appPlugins/ToolNCC.py:4490 appPlugins/ToolPaint.py:3212 msgid "Contour" msgstr "" #: appDatabase.py:687 appDatabase.py:798 appEditors/geo_plugins/GeoPaintPlugin.py:324 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:234 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:221 appPlugins/ToolNCC.py:4392 #: appPlugins/ToolNCC.py:4492 appPlugins/ToolPaint.py:3215 msgid "" "Cut around the perimeter of the polygon\n" "to trim rough edges." msgstr "" #: appDatabase.py:693 appDatabase.py:748 appEditors/AppGerberEditor.py:6787 #: appEditors/appGCodeEditor.py:812 appEditors/exc_plugins/ExcCopyPlugin.py:297 #: appEditors/exc_plugins/ExcCopyPlugin.py:374 appEditors/exc_plugins/ExcCopyPlugin.py:387 #: appEditors/geo_plugins/GeoCopyPlugin.py:295 appEditors/geo_plugins/GeoCopyPlugin.py:372 #: appEditors/geo_plugins/GeoCopyPlugin.py:385 #: appEditors/geo_plugins/GeoTransformationPlugin.py:603 appGUI/ObjectUI.py:138 #: appGUI/ObjectUI.py:990 appGUI/ObjectUI.py:1388 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:121 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:134 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:241 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:217 #: appPlugins/ToolEtchCompensation.py:453 appPlugins/ToolMarkers.py:1337 #: appPlugins/ToolMarkers.py:1364 appPlugins/ToolMarkers.py:1377 #: appPlugins/ToolMarkers.py:1606 appPlugins/ToolMarkers.py:1611 appPlugins/ToolNCC.py:4398 #: appPlugins/ToolNCC.py:4498 appPlugins/ToolPaint.py:3165 appPlugins/ToolPaint.py:3262 #: appPlugins/ToolTransform.py:568 msgid "Offset" msgstr "" #: appDatabase.py:697 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:243 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:253 appPlugins/ToolNCC.py:4402 #: appPlugins/ToolNCC.py:4500 msgid "" "If used, it will add an offset to the copper features.\n" "The copper clearing will finish to a distance\n" "from the copper features." msgstr "" #: appDatabase.py:750 appEditors/geo_plugins/GeoPaintPlugin.py:279 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:173 appPlugins/ToolPaint.py:3167 #: appPlugins/ToolPaint.py:3264 msgid "" "Distance by which to avoid\n" "the edges of the polygon to\n" "be painted." msgstr "" #: appDatabase.py:765 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:188 #: appPlugins/ToolPaint.py:3182 msgid "" "Algorithm for painting:\n" "- Standard: Fixed step inwards.\n" "- Seed-based: Outwards from seed.\n" "- Line-based: Parallel lines.\n" "- Laser-lines: Active only for Gerber objects.\n" "Will create lines that follow the traces.\n" "- Combo: In case of failure a new method will be picked from the above\n" "in the order specified." msgstr "" #: appDatabase.py:777 appDatabase.py:779 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolPaint.py:120 #: appPlugins/ToolPaint.py:394 appPlugins/ToolPaint.py:3194 appPlugins/ToolPaint.py:3196 msgid "Laser_lines" msgstr "" #: appDatabase.py:814 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:165 #: appPlugins/ToolIsolation.py:3671 msgid "Passes" msgstr "" #: appDatabase.py:816 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:167 #: appPlugins/ToolIsolation.py:3673 msgid "" "Width of the isolation gap in\n" "number (integer) of tool widths." msgstr "" #: appDatabase.py:829 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:191 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:534 appPlugins/ToolIsolation.py:3699 #: appPlugins/ToolMilling.py:4469 msgid "How much (percentage) of the tool width to overlap each tool pass." msgstr "" #: appDatabase.py:862 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:222 #: appPlugins/ToolIsolation.py:3732 msgid "Isolation Type" msgstr "" #: appDatabase.py:864 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:224 #: appPlugins/ToolIsolation.py:3734 msgid "" "Choose how the isolation will be executed:\n" "- 'Full' -> complete isolation of polygons\n" "- 'Ext' -> will isolate only on the outside\n" "- 'Int' -> will isolate only on the inside\n" "'Exterior' isolation is almost always possible\n" "(with the right tool) but 'Interior'\n" "isolation can be done only when there is an opening\n" "inside of the polygon (e.g polygon is a 'doughnut' shape)." msgstr "" #: appDatabase.py:873 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:233 appPlugins/ToolIsolation.py:3743 msgid "Full" msgstr "" #: appDatabase.py:874 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:234 #: appPlugins/ToolIsolation.py:3744 msgid "Ext" msgstr "" #: appDatabase.py:875 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:235 #: appPlugins/ToolIsolation.py:3745 msgid "Int" msgstr "" #: appDatabase.py:891 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:56 #: appPlugins/ToolDrilling.py:2516 appPlugins/ToolMilling.py:1430 msgid "" "Drill depth (negative)\n" "below the copper surface." msgstr "" #: appDatabase.py:907 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:288 #: appPlugins/ToolDrilling.py:2667 msgid "Offset Z" msgstr "" #: appDatabase.py:909 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:290 #: appPlugins/ToolDrilling.py:2669 msgid "" "Some drill bits (the larger ones) need to drill deeper\n" "to create the desired exit hole diameter due of the tip shape.\n" "The value here can compensate the Cut Z parameter." msgstr "" #: appDatabase.py:926 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:87 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:73 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:103 appPlugins/ToolCutOut.py:2439 #: appPlugins/ToolDrilling.py:2534 appPlugins/ToolMilling.py:4570 msgid "" "Use multiple passes to limit\n" "the cut depth in each pass. Will\n" "cut multiple times until Cut Z is\n" "reached." msgstr "" #: appDatabase.py:948 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:99 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:85 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:114 appPlugins/ToolCutOut.py:2450 #: appPlugins/ToolDrilling.py:2547 appPlugins/ToolMilling.py:4583 msgid "Depth of each pass (positive)." msgstr "" #: appDatabase.py:957 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:95 #: appPlugins/ToolDrilling.py:1562 appPlugins/ToolDrilling.py:2558 #: appPlugins/ToolMilling.py:3598 appPlugins/ToolMilling.py:4594 msgid "" "Tool height when travelling\n" "across the XY plane." msgstr "" #: appDatabase.py:980 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:156 #: appPlugins/ToolDrilling.py:2575 appPlugins/ToolMilling.py:4630 msgid "" "Tool speed while drilling\n" "(in units per minute).\n" "So called 'Plunge' feedrate.\n" "This is for linear move G01." msgstr "" #: appDatabase.py:995 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:322 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:326 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:171 #: appPlugins/ToolDrilling.py:2590 appPlugins/ToolMilling.py:4645 #: appPlugins/ToolSolderPaste.py:1500 msgid "Feedrate Rapids" msgstr "" #: appDatabase.py:997 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:324 #: appPlugins/ToolDrilling.py:2592 appPlugins/ToolMilling.py:4647 msgid "" "Tool speed while drilling\n" "(in units per minute).\n" "This is for the rapid move G00.\n" "It is useful only for Marlin,\n" "ignore for any other cases." msgstr "" #: appDatabase.py:1020 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:171 #: appPlugins/ToolDrilling.py:1580 appPlugins/ToolDrilling.py:2614 #: appPlugins/ToolMilling.py:3616 appPlugins/ToolMilling.py:4700 msgid "" "Speed of the spindle\n" "in RPM (optional)" msgstr "" #: appDatabase.py:1065 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:239 #: appPlugins/ToolDrilling.py:2683 msgid "Drill slots" msgstr "" #: appDatabase.py:1067 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:241 #: appPlugins/ToolDrilling.py:2685 msgid "If the selected tool has slots then they will be drilled." msgstr "" #: appDatabase.py:1078 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:256 #: appPlugins/ToolDrilling.py:2693 msgid "How much (percentage) of the tool diameter to overlap previous drill hole." msgstr "" #: appDatabase.py:1092 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:246 #: appPlugins/ToolDrilling.py:2707 msgid "Last drill" msgstr "" #: appDatabase.py:1094 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:248 #: appPlugins/ToolDrilling.py:2709 msgid "" "If the slot length is not completely covered by drill holes,\n" "add a drill hole on the slot end point." msgstr "" #: appDatabase.py:1120 appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:298 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:124 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:310 appPlugins/ToolCutOut.py:2465 #: appPlugins/ToolCutOut.py:2778 appPlugins/ToolExtract.py:1382 msgid "" "Margin over bounds. A positive value here\n" "will make the cutout of the PCB further from\n" "the actual PCB border" msgstr "" #: appDatabase.py:1132 msgid "Gap size" msgstr "" #: appDatabase.py:1134 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:152 #: appPlugins/ToolCutOut.py:2488 msgid "" "The size of the bridge gaps in the cutout\n" "used to keep the board connected to\n" "the surrounding material (the one \n" "from which the PCB is cutout)." msgstr "" #: appDatabase.py:1143 msgid "Gap type" msgstr "" #: appDatabase.py:1145 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:169 #: appPlugins/ToolCutOut.py:2504 msgid "" "The type of gap:\n" "- Bridge -> the cutout will be interrupted by bridges\n" "- Thin -> same as 'bridge' but it will be thinner by partially milling the gap\n" "- M-Bites -> 'Mouse Bites' - same as 'bridge' but covered with drill holes" msgstr "" #: appDatabase.py:1153 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:176 #: appPlugins/ToolCutOut.py:2519 appPlugins/ToolCutOut.py:2570 msgid "Bridge" msgstr "" #: appDatabase.py:1154 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:176 #: appPlugins/ToolCutOut.py:2519 msgid "Thin" msgstr "" #: appDatabase.py:1165 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:187 #: appPlugins/ToolCutOut.py:2525 msgid "Depth" msgstr "" #: appDatabase.py:1167 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:189 #: appPlugins/ToolCutOut.py:2527 msgid "" "The depth until the milling is done\n" "in order to thin the gaps." msgstr "" #: appDatabase.py:1183 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:208 #: appPlugins/ToolCutOut.py:2541 msgid "The drill hole diameter when doing mouse bites." msgstr "" #: appDatabase.py:1194 appEditors/exc_plugins/ExcCopyPlugin.py:296 #: appEditors/geo_plugins/GeoCopyPlugin.py:294 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:169 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:208 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:247 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:218 #: appPlugins/ToolCopperThieving.py:1462 appPlugins/ToolCopperThieving.py:1508 #: appPlugins/ToolCopperThieving.py:1554 appPlugins/ToolCutOut.py:2551 msgid "Spacing" msgstr "" #: appDatabase.py:1196 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:220 #: appPlugins/ToolCutOut.py:2553 msgid "The spacing between drill holes when doing mouse bites." msgstr "" #: appDatabase.py:1215 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:59 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:198 appPlugins/ToolCutOut.py:2408 #: appPlugins/ToolFilm.py:1521 msgid "Convex Shape" msgstr "" #: appDatabase.py:1218 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:61 #: appPlugins/ToolCutOut.py:2410 appPlugins/ToolCutOut.py:2415 msgid "" "Create a convex shape surrounding the entire PCB.\n" "Used only if the source object type is Gerber." msgstr "" #: appDatabase.py:1226 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:137 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:234 appPlugins/ToolCutOut.py:2472 #: appPlugins/ToolCutOut.py:2591 appPlugins/ToolCutOut.py:2690 msgid "Gaps" msgstr "" #: appDatabase.py:1228 appPlugins/ToolCutOut.py:2593 msgid "" "Number of gaps used for the Automatic cutout.\n" "There can be maximum 8 bridges/gaps.\n" "The choices are:\n" "- None - no gaps\n" "- lr - left + right\n" "- tb - top + bottom\n" "- 4 - left + right +top + bottom\n" "- 2lr - 2*left + 2*right\n" "- 2tb - 2*top + 2*bottom\n" "- 8 - 2*left + 2*right +2*top + 2*bottom" msgstr "" #: appDatabase.py:1265 msgid "Add Tool in DB" msgstr "" #: appDatabase.py:1268 msgid "" "Add a new tool in the Tools Database.\n" "It will be used in the Geometry UI.\n" "You can edit it after it is added." msgstr "" #: appDatabase.py:1282 msgid "Delete Tool from DB" msgstr "" #: appDatabase.py:1285 msgid "Remove a selection of tools in the Tools Database." msgstr "" #: appDatabase.py:1289 msgid "Export DB" msgstr "" #: appDatabase.py:1292 msgid "Save the Tools Database to a custom text file." msgstr "" #: appDatabase.py:1296 msgid "Import DB" msgstr "" #: appDatabase.py:1299 msgid "Load the Tools Database information's from a custom text file." msgstr "" #: appDatabase.py:1303 msgid "Save DB" msgstr "" #: appDatabase.py:1306 msgid "Save the Tools Database information's." msgstr "" #: appDatabase.py:1310 msgid "Transfer the Tool" msgstr "" #: appDatabase.py:1312 msgid "" "Insert a new tool in the Tools Table of the\n" "object/application tool after selecting a tool\n" "in the Tools Database." msgstr "" #: appDatabase.py:1318 appEditors/AppTextEditor.py:368 appGUI/GUIElements.py:2772 #: appGUI/GUIElements.py:2842 appGUI/GUIElements.py:2903 appGUI/GUIElements.py:2968 #: appGUI/GUIElements.py:4502 appGUI/MainGUI.py:1733 #: appGUI/preferences/PreferencesUIManager.py:1153 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:418 appMain.py:2766 appMain.py:4052 #: appMain.py:5014 appMain.py:5277 appMain.py:10261 appMain.py:12021 msgid "Cancel" msgstr "" #: appDatabase.py:1331 appDatabase.py:1342 appEditors/AppExcEditor.py:5314 #: appEditors/AppExcEditor.py:5325 appEditors/appGCodeEditor.py:900 #: appEditors/appGCodeEditor.py:911 appEditors/exc_plugins/ExcCopyPlugin.py:454 #: appEditors/exc_plugins/ExcCopyPlugin.py:463 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:329 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:338 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:395 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:404 #: appEditors/geo_plugins/GeoCopyPlugin.py:452 appEditors/geo_plugins/GeoCopyPlugin.py:461 #: appGUI/ObjectUI.py:158 appGUI/ObjectUI.py:169 appPlugins/ToolAlignObjects.py:541 #: appPlugins/ToolAlignObjects.py:552 appPlugins/ToolCalculators.py:1055 #: appPlugins/ToolCalculators.py:1066 appPlugins/ToolCopperThieving.py:1759 #: appPlugins/ToolCopperThieving.py:1770 appPlugins/ToolCutOut.py:2835 #: appPlugins/ToolCutOut.py:2846 appPlugins/ToolDblSided.py:1134 #: appPlugins/ToolDblSided.py:1145 appPlugins/ToolDistance.py:999 #: appPlugins/ToolDistance.py:1010 appPlugins/ToolDrilling.py:3021 #: appPlugins/ToolDrilling.py:3032 appPlugins/ToolEtchCompensation.py:498 #: appPlugins/ToolEtchCompensation.py:509 appPlugins/ToolExtract.py:1439 #: appPlugins/ToolExtract.py:1450 appPlugins/ToolFiducials.py:1206 #: appPlugins/ToolFiducials.py:1217 appPlugins/ToolFilm.py:1850 appPlugins/ToolFilm.py:1861 #: appPlugins/ToolFollow.py:777 appPlugins/ToolFollow.py:788 #: appPlugins/ToolInvertGerber.py:306 appPlugins/ToolInvertGerber.py:317 #: appPlugins/ToolIsolation.py:4005 appPlugins/ToolIsolation.py:4016 #: appPlugins/ToolLevelling.py:2333 appPlugins/ToolLevelling.py:2344 #: appPlugins/ToolMarkers.py:1621 appPlugins/ToolMarkers.py:1632 #: appPlugins/ToolMilling.py:5080 appPlugins/ToolMilling.py:5091 appPlugins/ToolNCC.py:4714 #: appPlugins/ToolNCC.py:4725 appPlugins/ToolObjectDistance.py:623 #: appPlugins/ToolObjectDistance.py:634 appPlugins/ToolOptimal.py:704 #: appPlugins/ToolOptimal.py:715 appPlugins/ToolPaint.py:3414 appPlugins/ToolPaint.py:3425 #: appPlugins/ToolPanelize.py:1438 appPlugins/ToolPanelize.py:1449 #: appPlugins/ToolPcbWizard.py:514 appPlugins/ToolPcbWizard.py:525 #: appPlugins/ToolPunchGerber.py:2391 appPlugins/ToolPunchGerber.py:2402 #: appPlugins/ToolQRCode.py:1008 appPlugins/ToolQRCode.py:1019 #: appPlugins/ToolRulesCheck.py:1853 appPlugins/ToolRulesCheck.py:1864 #: appPlugins/ToolSolderPaste.py:1752 appPlugins/ToolSolderPaste.py:1763 #: appPlugins/ToolSub.py:959 appPlugins/ToolSub.py:970 appPlugins/ToolTransform.py:1049 #: appPlugins/ToolTransform.py:1060 appTool.py:333 appTool.py:344 msgid "Edited value is out of range" msgstr "" #: appDatabase.py:1337 appDatabase.py:1344 appEditors/AppExcEditor.py:5320 #: appEditors/AppExcEditor.py:5327 appEditors/appGCodeEditor.py:906 #: appEditors/appGCodeEditor.py:913 appGUI/ObjectUI.py:164 appGUI/ObjectUI.py:171 #: appPlugins/ToolAlignObjects.py:547 appPlugins/ToolAlignObjects.py:554 #: appPlugins/ToolCalculators.py:1061 appPlugins/ToolCalculators.py:1068 #: appPlugins/ToolCopperThieving.py:1765 appPlugins/ToolCopperThieving.py:1772 #: appPlugins/ToolCutOut.py:2841 appPlugins/ToolCutOut.py:2848 #: appPlugins/ToolDblSided.py:1140 appPlugins/ToolDblSided.py:1147 #: appPlugins/ToolDistance.py:1005 appPlugins/ToolDistance.py:1012 #: appPlugins/ToolDrilling.py:3027 appPlugins/ToolDrilling.py:3034 #: appPlugins/ToolEtchCompensation.py:504 appPlugins/ToolEtchCompensation.py:511 #: appPlugins/ToolExtract.py:1445 appPlugins/ToolExtract.py:1452 #: appPlugins/ToolFiducials.py:1212 appPlugins/ToolFiducials.py:1219 #: appPlugins/ToolFilm.py:1856 appPlugins/ToolFilm.py:1863 appPlugins/ToolFollow.py:783 #: appPlugins/ToolFollow.py:790 appPlugins/ToolInvertGerber.py:312 #: appPlugins/ToolInvertGerber.py:319 appPlugins/ToolIsolation.py:4011 #: appPlugins/ToolIsolation.py:4018 appPlugins/ToolLevelling.py:2339 #: appPlugins/ToolLevelling.py:2346 appPlugins/ToolMarkers.py:1627 #: appPlugins/ToolMarkers.py:1634 appPlugins/ToolMilling.py:5086 #: appPlugins/ToolMilling.py:5093 appPlugins/ToolNCC.py:4720 appPlugins/ToolNCC.py:4727 #: appPlugins/ToolObjectDistance.py:629 appPlugins/ToolObjectDistance.py:636 #: appPlugins/ToolOptimal.py:710 appPlugins/ToolOptimal.py:717 appPlugins/ToolPaint.py:3420 #: appPlugins/ToolPaint.py:3427 appPlugins/ToolPanelize.py:1444 #: appPlugins/ToolPanelize.py:1451 appPlugins/ToolPcbWizard.py:520 #: appPlugins/ToolPcbWizard.py:527 appPlugins/ToolPunchGerber.py:2397 #: appPlugins/ToolPunchGerber.py:2404 appPlugins/ToolQRCode.py:1014 #: appPlugins/ToolQRCode.py:1021 appPlugins/ToolRulesCheck.py:1859 #: appPlugins/ToolRulesCheck.py:1866 appPlugins/ToolSolderPaste.py:1758 #: appPlugins/ToolSolderPaste.py:1765 appPlugins/ToolSub.py:965 appPlugins/ToolSub.py:972 #: appPlugins/ToolTransform.py:1055 appPlugins/ToolTransform.py:1062 appTool.py:339 #: appTool.py:346 msgid "Edited value is within limits." msgstr "" #: appDatabase.py:1593 msgid "Sort by Target" msgstr "" #: appDatabase.py:1597 msgid "Sort by Diameter" msgstr "" #: appDatabase.py:1602 msgid "Add to DB" msgstr "" #: appDatabase.py:1605 msgid "Copy from DB" msgstr "" #: appDatabase.py:1608 msgid "Delete from DB" msgstr "" #: appDatabase.py:1613 appMain.py:4041 appMain.py:10249 appTranslation.py:216 msgid "Save changes" msgstr "" #: appDatabase.py:1717 appDatabase.py:2204 appDatabase.py:2656 appDatabase.py:2668 #: appGUI/MainGUI.py:543 appMain.py:6667 appMain.py:6704 appMain.py:6791 appMain.py:6803 #: appMain.py:6812 appMain.py:6822 appPlugins/ToolCutOut.py:557 appPlugins/ToolCutOut.py:578 #: appPlugins/ToolCutOut.py:615 appPlugins/ToolIsolation.py:2974 #: appPlugins/ToolIsolation.py:2984 appPlugins/ToolIsolation.py:3064 #: appPlugins/ToolMilling.py:2245 appPlugins/ToolNCC.py:3912 appPlugins/ToolNCC.py:3922 #: appPlugins/ToolNCC.py:3998 appPlugins/ToolPaint.py:2786 appPlugins/ToolPaint.py:2796 #: appPlugins/ToolPaint.py:2881 msgid "Tools Database" msgstr "" #: appDatabase.py:1736 appDatabase.py:2190 appPlugins/ToolCutOut.py:452 #: appPlugins/ToolDrilling.py:1148 appPlugins/ToolIsolation.py:1359 #: appPlugins/ToolMilling.py:2086 appPlugins/ToolNCC.py:1213 appPlugins/ToolPaint.py:858 msgid "Failed to parse Tools DB file." msgstr "" #: appDatabase.py:1739 appDatabase.py:2193 msgid "Loaded Tools DB from" msgstr "" #: appDatabase.py:2040 msgid "Tool added to DB." msgstr "" #: appDatabase.py:2073 msgid "Tool copied from Tools DB." msgstr "" #: appDatabase.py:2107 msgid "Tool removed from Tools DB." msgstr "" #: appDatabase.py:2120 msgid "Export Tools Database" msgstr "" #: appDatabase.py:2122 msgid "Tools_Database" msgstr "" #: appDatabase.py:2159 appDatabase.py:2162 appDatabase.py:2265 msgid "Failed to write Tools DB to file." msgstr "" #: appDatabase.py:2165 msgid "Exported Tools DB to" msgstr "" #: appDatabase.py:2172 msgid "Import FlatCAM Tools DB" msgstr "" #: appDatabase.py:2269 msgid "Saved Tools DB." msgstr "" #: appDatabase.py:2476 msgid "To change tool properties select only one tool. Tools currently selected" msgstr "" #: appDatabase.py:2632 msgid "No Tool/row selected in the Tools Database table" msgstr "" #: appDatabase.py:2636 appPlugins/ToolDrilling.py:1152 msgid "Tools DB empty." msgstr "" #: appDatabase.py:2663 msgid "Tools in Tools Database edited but not saved." msgstr "" #: appDatabase.py:2672 msgid "Cancelled adding tool from DB." msgstr "" #: appEditors/AppExcEditor.py:248 appEditors/AppExcEditor.py:306 #: appEditors/AppExcEditor.py:535 appEditors/AppExcEditor.py:970 #: appEditors/AppExcEditor.py:1029 appEditors/AppExcEditor.py:1351 #: appEditors/AppGerberEditor.py:248 appEditors/AppGerberEditor.py:255 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:345 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:410 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:430 msgid "Click to place ..." msgstr "" #: appEditors/AppExcEditor.py:256 msgid "To add a drill first select a tool" msgstr "" #: appEditors/AppExcEditor.py:270 appEditors/AppExcEditor.py:289 msgid "Drill" msgstr "" #: appEditors/AppExcEditor.py:370 appEditors/AppExcEditor.py:815 #: appEditors/AppExcEditor.py:1168 appEditors/AppExcEditor.py:1729 #: appEditors/AppExcEditor.py:2163 appEditors/AppExcEditor.py:2323 #: appEditors/AppExcEditor.py:2522 appEditors/AppExcEditor.py:3687 #: appEditors/AppExcEditor.py:4511 appEditors/AppExcEditor.py:4518 #: appEditors/AppExcEditor.py:5003 appEditors/AppGeoEditor.py:723 #: appEditors/AppGeoEditor.py:968 appEditors/AppGeoEditor.py:1122 #: appEditors/AppGeoEditor.py:1319 appEditors/AppGeoEditor.py:1528 #: appEditors/AppGeoEditor.py:1867 appEditors/AppGeoEditor.py:1981 #: appEditors/AppGeoEditor.py:2321 appEditors/AppGeoEditor.py:2785 #: appEditors/AppGeoEditor.py:2855 appEditors/AppGeoEditor.py:2881 #: appEditors/AppGeoEditor.py:2909 appEditors/AppGeoEditor.py:3049 #: appEditors/AppGeoEditor.py:4233 appEditors/AppGeoEditor.py:4247 #: appEditors/AppGeoEditor.py:4968 appEditors/AppGeoEditor.py:5021 #: appEditors/AppGeoEditor.py:5084 appEditors/AppGeoEditor.py:5110 #: appEditors/AppGeoEditor.py:5135 appEditors/AppGeoEditor.py:5167 #: appEditors/AppGerberEditor.py:390 appEditors/AppGerberEditor.py:814 #: appEditors/AppGerberEditor.py:941 appEditors/AppGerberEditor.py:1253 #: appEditors/AppGerberEditor.py:1514 appEditors/AppGerberEditor.py:1724 #: appEditors/AppGerberEditor.py:2014 appEditors/AppGerberEditor.py:2310 #: appEditors/AppGerberEditor.py:2391 appEditors/AppGerberEditor.py:2538 #: appEditors/AppGerberEditor.py:3249 appEditors/AppGerberEditor.py:5022 #: appEditors/AppGerberEditor.py:5327 appEditors/AppGerberEditor.py:5345 #: appEditors/AppGerberEditor.py:5813 appEditors/AppGerberEditor.py:5996 #: appEditors/AppGerberEditor.py:6058 appEditors/AppGerberEditor.py:6105 #: appEditors/AppGerberEditor.py:7484 appEditors/AppGerberEditor.py:7646 #: appEditors/AppGerberEditor.py:7648 appEditors/AppGerberEditor.py:7719 #: appEditors/geo_plugins/GeoBufferPlugin.py:201 #: appEditors/geo_plugins/GeoBufferPlugin.py:267 #: appEditors/geo_plugins/GeoBufferPlugin.py:335 #: appEditors/geo_plugins/GeoPaintPlugin.py:214 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:118 #: appEditors/geo_plugins/GeoTransformationPlugin.py:326 #: appEditors/geo_plugins/GeoTransformationPlugin.py:457 #: appEditors/geo_plugins/GeoTransformationPlugin.py:459 #: appEditors/geo_plugins/GeoTransformationPlugin.py:515 appGUI/MainGUI.py:3546 #: appGUI/MainGUI.py:3581 appGUI/MainGUI.py:4089 appMain.py:5787 appMain.py:5912 #: appObjects/GeometryObject.py:543 appObjects/GeometryObject.py:1229 #: appObjects/GeometryObject.py:1308 appObjects/GerberObject.py:427 #: appParsers/ParseGerber.py:2205 appParsers/ParseGerber.py:2299 #: appParsers/ParseGerber.py:2374 appParsers/ParseGerber.py:2448 #: appParsers/ParseGerber.py:2510 appPlugins/ToolAlignObjects.py:276 #: appPlugins/ToolAlignObjects.py:298 appPlugins/ToolCalculators.py:332 #: appPlugins/ToolCalculators.py:342 appPlugins/ToolCutOut.py:1523 #: appPlugins/ToolDistance.py:374 appPlugins/ToolDistance.py:401 #: appPlugins/ToolDistance.py:633 appPlugins/ToolFiducials.py:673 #: appPlugins/ToolFiducials.py:688 appPlugins/ToolFollow.py:322 appPlugins/ToolFollow.py:390 #: appPlugins/ToolIsolation.py:1608 appPlugins/ToolMarkers.py:1065 #: appPlugins/ToolMove.py:244 appPlugins/ToolObjectDistance.py:427 #: appPlugins/ToolPaint.py:2315 appPlugins/ToolPanelize.py:1094 #: appPlugins/ToolSolderPaste.py:926 tclCommands/TclCommandPanelize.py:430 #: tclCommands/TclCommandPanelize.py:440 tclCommands/TclCommandSetOrigin.py:113 msgid "Done." msgstr "" #: appEditors/AppExcEditor.py:451 appEditors/AppExcEditor.py:464 #: appEditors/AppExcEditor.py:802 appEditors/AppExcEditor.py:1261 #: appEditors/AppExcEditor.py:1274 appEditors/AppExcEditor.py:1716 #: appEditors/AppExcEditor.py:2843 appEditors/AppExcEditor.py:2857 #: appEditors/AppGeoEditor.py:686 appEditors/AppGeoEditor.py:689 #: appEditors/AppGeoEditor.py:1217 appEditors/AppGeoEditor.py:1225 #: appEditors/AppGeoEditor.py:1423 appEditors/AppGeoEditor.py:1437 #: appEditors/AppGeoEditor.py:1636 appEditors/AppGeoEditor.py:1650 #: appEditors/AppGeoEditor.py:2172 appEditors/AppGeoEditor.py:2186 #: appEditors/AppGeoEditor.py:2688 appEditors/AppGeoEditor.py:2702 #: appEditors/AppGerberEditor.py:801 appEditors/AppGerberEditor.py:3923 #: appEditors/AppGerberEditor.py:5992 appEditors/geo_plugins/GeoCirclePlugin.py:99 #: appEditors/geo_plugins/GeoRectanglePlugin.py:102 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:104 appMain.py:5321 appMain.py:5931 #: appMain.py:9213 appMain.py:10644 appMain.py:10771 appMain.py:12252 appMain.py:12266 #: appMain.py:12276 appMain.py:12293 appObjects/CNCJobObject.py:842 #: appPlugins/ToolCopperThieving.py:337 appPlugins/ToolCopperThieving.py:932 #: appPlugins/ToolCopperThieving.py:1144 appPlugins/ToolCutOut.py:756 #: appPlugins/ToolCutOut.py:788 appPlugins/ToolCutOut.py:920 appPlugins/ToolCutOut.py:1189 #: appPlugins/ToolCutOut.py:1340 appPlugins/ToolCutOut.py:1459 appPlugins/ToolCutOut.py:1477 #: appPlugins/ToolCutOut.py:1491 appPlugins/ToolDblSided.py:586 #: appPlugins/ToolDblSided.py:599 appPlugins/ToolDrilling.py:2013 #: appPlugins/ToolExtract.py:424 appPlugins/ToolExtract.py:790 appPlugins/ToolExtract.py:839 #: appPlugins/ToolExtract.py:848 appPlugins/ToolExtract.py:852 #: appPlugins/ToolFiducials.py:352 appPlugins/ToolFiducials.py:626 #: appPlugins/ToolFiducials.py:682 appPlugins/ToolFiducials.py:697 #: appPlugins/ToolFilm.py:1019 appPlugins/ToolImage.py:274 appPlugins/ToolImage.py:336 #: appPlugins/ToolIsolation.py:1513 appPlugins/ToolMarkers.py:375 #: appPlugins/ToolMarkers.py:398 appPlugins/ToolMarkers.py:406 appPlugins/ToolMarkers.py:430 #: appPlugins/ToolMarkers.py:901 appPlugins/ToolMarkers.py:1017 #: appPlugins/ToolMarkers.py:1026 appPlugins/ToolMarkers.py:1063 appPlugins/ToolMove.py:195 #: appPlugins/ToolPaint.py:2309 appPlugins/ToolSolderPaste.py:824 #: appPlugins/ToolSolderPaste.py:1151 camlib.py:1224 camlib.py:2464 camlib.py:2537 #: camlib.py:2605 camlib.py:2677 camlib.py:2680 camlib.py:4931 camlib.py:5350 msgid "Failed." msgstr "" #: appEditors/AppExcEditor.py:543 msgid "To add an Drill Array first select a tool in Tool Table" msgstr "" #: appEditors/AppExcEditor.py:556 appEditors/AppExcEditor.py:574 msgid "Drill Array" msgstr "" #: appEditors/AppExcEditor.py:621 appEditors/AppExcEditor.py:1446 msgid "Click on the Circular Array Start position" msgstr "" #: appEditors/AppExcEditor.py:796 appEditors/AppExcEditor.py:1688 #: appEditors/AppGerberEditor.py:796 msgid "Too many items for the selected spacing angle." msgstr "" #: appEditors/AppExcEditor.py:978 msgid "To add a slot first select a tool" msgstr "" #: appEditors/AppExcEditor.py:994 appEditors/AppExcEditor.py:1012 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:161 msgid "Slot" msgstr "" #: appEditors/AppExcEditor.py:1359 msgid "To add an Slot Array first select a tool in Tool Table" msgstr "" #: appEditors/AppExcEditor.py:1373 appEditors/AppExcEditor.py:1390 msgid "Slot Array" msgstr "" #: appEditors/AppExcEditor.py:1917 appEditors/AppExcEditor.py:1930 #: appEditors/exc_plugins/ExcResizePlugin.py:143 #: appEditors/exc_plugins/ExcResizePlugin.py:158 msgid "Resize" msgstr "" #: appEditors/AppExcEditor.py:1948 msgid "Click on the Drill(s) to resize ..." msgstr "" #: appEditors/AppExcEditor.py:1988 msgid "Resize drill(s) failed. Please enter a diameter for resize." msgstr "" #: appEditors/AppExcEditor.py:2165 msgid "Nothing selected" msgstr "" #: appEditors/AppExcEditor.py:2275 appEditors/AppExcEditor.py:2286 appGUI/MainGUI.py:3836 #: appGUI/MainGUI.py:3922 appGUI/MainGUI.py:3969 appGUI/MainGUI.py:4098 #: appGUI/MainGUI.py:4214 appGUI/MainGUI.py:4244 msgid "Cancelled. Nothing selected." msgstr "" #: appEditors/AppExcEditor.py:2279 appEditors/AppExcEditor.py:2431 #: appEditors/AppGeoEditor.py:1903 appEditors/AppGeoEditor.py:1952 #: appEditors/AppGeoEditor.py:2241 appEditors/AppGeoEditor.py:2292 #: appEditors/AppGerberEditor.py:2194 appEditors/exc_plugins/ExcCopyPlugin.py:468 #: appEditors/exc_plugins/ExcCopyPlugin.py:490 appEditors/exc_plugins/ExcCopyPlugin.py:499 #: appEditors/geo_plugins/GeoCopyPlugin.py:466 appEditors/geo_plugins/GeoCopyPlugin.py:488 #: appEditors/geo_plugins/GeoCopyPlugin.py:497 msgid "Click on reference location ..." msgstr "" #: appEditors/AppExcEditor.py:2291 appEditors/AppExcEditor.py:2463 #: appEditors/AppGerberEditor.py:481 appEditors/AppGerberEditor.py:2192 #: appEditors/AppGerberEditor.py:2222 appGUI/MainGUI.py:4237 msgid "Click on target location ..." msgstr "" #: appEditors/AppExcEditor.py:2426 appEditors/geo_plugins/GeoBufferPlugin.py:141 #: appEditors/geo_plugins/GeoBufferPlugin.py:218 #: appEditors/geo_plugins/GeoBufferPlugin.py:286 #: appEditors/geo_plugins/GeoPaintPlugin.py:133 appMain.py:5931 msgid "Nothing selected." msgstr "" #: appEditors/AppExcEditor.py:2436 appEditors/AppExcEditor.py:2440 #: appEditors/AppGeoEditor.py:2247 appEditors/AppGeoEditor.py:2250 appGUI/GUIElements.py:455 #: appGUI/GUIElements.py:1234 appGUI/GUIElements.py:1478 appGUI/GUIElements.py:1919 #: appGUI/GUIElements.py:2207 appGUI/GUIElements.py:4559 appGUI/MainGUI.py:464 #: appGUI/MainGUI.py:811 appGUI/MainGUI.py:870 appGUI/MainGUI.py:951 appGUI/MainGUI.py:1094 #: appGUI/MainGUI.py:1240 appGUI/MainGUI.py:1346 appGUI/MainGUI.py:1923 #: appGUI/MainGUI.py:2490 appGUI/MainGUI.py:2634 appGUI/MainGUI.py:2732 #: appGUI/MainGUI.py:5418 appGUI/MainGUI.py:5557 appObjects/ExcellonObject.py:516 #: appPlugins/ToolDrilling.py:287 appPlugins/ToolMilling.py:402 #: appPlugins/ToolMilling.py:413 appPlugins/ToolPanelize.py:445 #: appPlugins/ToolPanelize.py:474 appPlugins/ToolPanelize.py:600 #: appPlugins/ToolPanelize.py:611 appPlugins/ToolPanelize.py:649 #: appPlugins/ToolPanelize.py:698 appPlugins/ToolPanelize.py:912 #: appPlugins/ToolPanelize.py:951 appPlugins/ToolPanelize.py:999 msgid "Copy" msgstr "" #: appEditors/AppExcEditor.py:2447 appEditors/AppGeoEditor.py:1919 #: appEditors/AppGeoEditor.py:2257 msgid "Click on destination point ..." msgstr "" #: appEditors/AppExcEditor.py:2458 msgid " Nothing selected." msgstr "" #: appEditors/AppExcEditor.py:3090 appEditors/AppGeoEditor.py:3635 #: appEditors/AppGerberEditor.py:3503 appEditors/AppGerberEditor.py:6321 #: appEditors/AppGerberEditor.py:6612 appGUI/GUIElements.py:469 appGUI/GUIElements.py:1248 #: appGUI/GUIElements.py:1492 appGUI/GUIElements.py:1931 appGUI/GUIElements.py:2217 #: appGUI/GUIElements.py:4564 appGUI/MainGUI.py:470 appGUI/MainGUI.py:755 #: appGUI/MainGUI.py:814 appGUI/MainGUI.py:873 appGUI/MainGUI.py:953 appGUI/MainGUI.py:1096 #: appGUI/MainGUI.py:1242 appGUI/MainGUI.py:1303 appGUI/MainGUI.py:1348 #: appGUI/MainGUI.py:1925 appGUI/MainGUI.py:2492 appGUI/MainGUI.py:2636 #: appGUI/MainGUI.py:2688 appGUI/MainGUI.py:2734 appGUI/MainGUI.py:5327 #: appGUI/MainGUI.py:5427 appGUI/MainGUI.py:5568 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:396 appMain.py:7266 #: appPlugins/ToolDrilling.py:291 appPlugins/ToolIsolation.py:212 #: appPlugins/ToolMilling.py:405 appPlugins/ToolMilling.py:417 appPlugins/ToolNCC.py:213 #: appPlugins/ToolPaint.py:209 appPlugins/ToolSolderPaste.py:124 msgid "Delete" msgstr "" #: appEditors/AppExcEditor.py:3313 appObjects/ExcellonObject.py:385 #: appPlugins/ToolDrilling.py:750 appPlugins/ToolMilling.py:1183 #: appPlugins/ToolMilling.py:4057 msgid "Total Drills" msgstr "" #: appEditors/AppExcEditor.py:3345 appObjects/ExcellonObject.py:419 #: appPlugins/ToolDrilling.py:777 appPlugins/ToolMilling.py:1210 #: appPlugins/ToolMilling.py:4081 msgid "Total Slots" msgstr "" #: appEditors/AppExcEditor.py:3423 appEditors/AppGeoEditor.py:5472 #: appEditors/AppGerberEditor.py:4273 appEditors/appGCodeEditor.py:609 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:184 appObjects/CNCJobObject.py:603 #: appObjects/DocumentObject.py:190 appObjects/ExcellonObject.py:219 #: appObjects/GeometryObject.py:458 appObjects/GerberObject.py:226 #: appObjects/ScriptObject.py:177 appPlugins/ToolCutOut.py:289 #: appPlugins/ToolDblSided.py:209 appPlugins/ToolDrilling.py:539 #: appPlugins/ToolFiducials.py:209 appPlugins/ToolFilm.py:259 appPlugins/ToolFollow.py:163 #: appPlugins/ToolIsolation.py:453 appPlugins/ToolLevelling.py:385 #: appPlugins/ToolMarkers.py:226 appPlugins/ToolMilling.py:690 appPlugins/ToolNCC.py:402 #: appPlugins/ToolPaint.py:424 appPlugins/ToolPanelize.py:269 #: appPlugins/ToolPunchGerber.py:407 appPlugins/ToolQRCode.py:184 appPlugins/ToolSub.py:225 msgid "Beginner" msgstr "" #: appEditors/AppExcEditor.py:3434 appEditors/AppGeoEditor.py:5485 #: appEditors/AppGerberEditor.py:4286 appEditors/appGCodeEditor.py:622 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:185 appObjects/CNCJobObject.py:613 #: appObjects/DocumentObject.py:199 appObjects/ExcellonObject.py:236 #: appObjects/GeometryObject.py:467 appObjects/GerberObject.py:241 #: appObjects/ScriptObject.py:186 appPlugins/ToolCutOut.py:325 #: appPlugins/ToolDblSided.py:223 appPlugins/ToolDrilling.py:582 #: appPlugins/ToolFiducials.py:224 appPlugins/ToolFilm.py:276 appPlugins/ToolFollow.py:175 #: appPlugins/ToolIsolation.py:510 appPlugins/ToolLevelling.py:400 #: appPlugins/ToolMarkers.py:244 appPlugins/ToolMilling.py:751 appPlugins/ToolNCC.py:440 #: appPlugins/ToolPaint.py:449 appPlugins/ToolPanelize.py:281 #: appPlugins/ToolPunchGerber.py:419 appPlugins/ToolQRCode.py:198 appPlugins/ToolSub.py:236 msgid "Advanced" msgstr "" #: appEditors/AppExcEditor.py:3457 appObjects/GeometryObject.py:719 #: appObjects/GeometryObject.py:1378 appPlugins/ToolDrilling.py:1778 #: appPlugins/ToolIsolation.py:1501 appPlugins/ToolIsolation.py:1991 #: appPlugins/ToolMilling.py:2318 appPlugins/ToolMilling.py:3091 #: appPlugins/ToolMilling.py:3864 appPlugins/ToolNCC.py:1402 appPlugins/ToolNCC.py:1540 #: appPlugins/ToolPaint.py:1024 appPlugins/ToolPaint.py:1162 appPlugins/ToolPaint.py:1872 #: appPlugins/ToolSolderPaste.py:550 appPlugins/ToolSolderPaste.py:622 msgid "Wrong value format entered, use a number." msgstr "" #: appEditors/AppExcEditor.py:3468 msgid "" "Tool already in the original or actual tool list.\n" "Save and reedit Excellon if you need to add this tool. " msgstr "" #: appEditors/AppExcEditor.py:3476 appGUI/MainGUI.py:4280 msgid "Added new tool with dia" msgstr "" #: appEditors/AppExcEditor.py:3510 msgid "Select a tool in Tool Table" msgstr "" #: appEditors/AppExcEditor.py:3540 msgid "Deleted tool with diameter" msgstr "" #: appEditors/AppExcEditor.py:4302 msgid "There are no Tools definitions in the file. Aborting Excellon creation." msgstr "" #: appEditors/AppExcEditor.py:4306 appEditors/AppGerberEditor.py:5002 appMain.py:6747 #: appMain.py:8800 appMain.py:11511 appMain.py:11582 appMain.py:11778 appMain.py:11843 #: appObjects/AppObject.py:170 appObjects/GeometryObject.py:661 #: appParsers/ParseExcellon.py:976 appPlugins/ToolMilling.py:3025 #: appPlugins/ToolPcbWizard.py:343 appPlugins/ToolSolderPaste.py:1005 msgid "An internal error has occurred. See shell.\n" msgstr "" #: appEditors/AppExcEditor.py:4311 appObjects/GeometryObject.py:966 #: appObjects/GeometryObject.py:971 appObjects/GeometryObject.py:1129 #: appPlugins/ToolMilling.py:3494 appPlugins/ToolMilling.py:3498 appPlugins/ToolSub.py:468 #: appPlugins/ToolSub.py:663 msgid "Generating" msgstr "" #: appEditors/AppExcEditor.py:4333 msgid "Excellon editing finished." msgstr "" #: appEditors/AppExcEditor.py:4349 msgid "Cancelled. There is no Tool/Drill selected" msgstr "" #: appEditors/AppExcEditor.py:5172 appGUI/MainGUI.py:786 appGUI/ObjectUI.py:626 msgid "Excellon Editor" msgstr "" #: appEditors/AppExcEditor.py:5182 appEditors/AppGeoEditor.py:5258 #: appEditors/AppGerberEditor.py:6168 appEditors/appGCodeEditor.py:782 appGUI/ObjectUI.py:72 #: appPlugins/ToolCutOut.py:2272 appPlugins/ToolDblSided.py:704 #: appPlugins/ToolDrilling.py:2384 appPlugins/ToolFiducials.py:912 #: appPlugins/ToolFilm.py:1251 appPlugins/ToolFollow.py:680 appPlugins/ToolIsolation.py:3376 #: appPlugins/ToolLevelling.py:1746 appPlugins/ToolMarkers.py:1241 #: appPlugins/ToolMilling.py:3931 appPlugins/ToolNCC.py:4045 appPlugins/ToolPaint.py:2928 #: appPlugins/ToolPanelize.py:1145 appPlugins/ToolPunchGerber.py:2012 #: appPlugins/ToolQRCode.py:736 appPlugins/ToolSub.py:785 msgid "" "Beginner Mode - many parameters are hidden.\n" "Advanced Mode - full control.\n" "Permanent change is done in 'Preferences' menu." msgstr "" #: appEditors/AppExcEditor.py:5196 appEditors/AppGerberEditor.py:6180 #: appEditors/appGCodeEditor.py:794 msgid "Name:" msgstr "" #: appEditors/AppExcEditor.py:5203 appGUI/ObjectUI.py:275 appGUI/ObjectUI.py:658 #: appGUI/ObjectUI.py:946 appGUI/ObjectUI.py:958 appGUI/ObjectUI.py:1342 #: appPlugins/ToolDrilling.py:2425 appPlugins/ToolIsolation.py:3410 #: appPlugins/ToolMilling.py:4002 appPlugins/ToolNCC.py:4107 appPlugins/ToolPaint.py:2990 #: appPlugins/ToolSolderPaste.py:1277 msgid "Tools Table" msgstr "" #: appEditors/AppExcEditor.py:5205 msgid "" "Tools in this Excellon object\n" "when are used for drilling." msgstr "" #: appEditors/AppExcEditor.py:5226 msgid "Convert Slots" msgstr "" #: appEditors/AppExcEditor.py:5230 msgid "Convert the slots in the selected tools to drills." msgstr "" #: appEditors/AppExcEditor.py:5240 msgid "Add/Delete Tool" msgstr "" #: appEditors/AppExcEditor.py:5242 msgid "" "Add/Delete a tool to the tool list\n" "for this Excellon object." msgstr "" #: appEditors/AppExcEditor.py:5254 appEditors/geo_plugins/GeoPaintPlugin.py:245 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:44 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:127 appPlugins/ToolCutOut.py:2353 #: appPlugins/ToolCutOut.py:2539 appPlugins/ToolIsolation.py:3482 #: appPlugins/ToolMilling.py:4193 appPlugins/ToolNCC.py:4193 appPlugins/ToolNCC.py:4206 #: appPlugins/ToolPaint.py:3069 msgid "Tool Dia" msgstr "" #: appEditors/AppExcEditor.py:5256 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:55 #: appPlugins/ToolIsolation.py:3484 appPlugins/ToolMilling.py:4195 #: appPlugins/ToolNCC.py:4195 msgid "Diameter for the new tool" msgstr "" #: appEditors/AppExcEditor.py:5268 appEditors/AppGerberEditor.py:6314 #: appEditors/AppGerberEditor.py:6834 appEditors/exc_plugins/ExcCopyPlugin.py:436 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:315 #: appEditors/exc_plugins/ExcDrillPlugin.py:191 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:378 #: appEditors/exc_plugins/ExcSlotPlugin.py:255 appEditors/geo_plugins/GeoCirclePlugin.py:128 #: appEditors/geo_plugins/GeoCirclePlugin.py:257 appEditors/geo_plugins/GeoCopyPlugin.py:434 #: appEditors/geo_plugins/GeoRectanglePlugin.py:161 #: appEditors/geo_plugins/GeoRectanglePlugin.py:316 #: appEditors/geo_plugins/GeoTransformationPlugin.py:656 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:388 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:340 appMain.py:7264 #: appPlugins/ToolCopperThieving.py:1714 appPlugins/ToolDblSided.py:918 #: appPlugins/ToolLevelling.py:2074 appPlugins/ToolNCC.py:207 appPlugins/ToolPaint.py:203 #: appPlugins/ToolSolderPaste.py:121 appPlugins/ToolTransform.py:623 msgid "Add" msgstr "" #: appEditors/AppExcEditor.py:5271 msgid "" "Add a new tool to the tool list\n" "with the diameter specified above." msgstr "" #: appEditors/AppExcEditor.py:5280 msgid "Delete Tool" msgstr "" #: appEditors/AppExcEditor.py:5283 msgid "" "Delete a tool in the tool list\n" "by selecting a row in the tool table." msgstr "" #: appEditors/AppExcEditor.py:5297 appEditors/AppGeoEditor.py:5440 #: appEditors/AppGerberEditor.py:6769 appEditors/appGCodeEditor.py:74 #: appEditors/appGCodeEditor.py:75 appEditors/appGCodeEditor.py:889 appGUI/MainGUI.py:393 #: appGUI/MainGUI.py:1929 appMain.py:2755 msgid "Exit Editor" msgstr "" #: appEditors/AppExcEditor.py:5300 appEditors/AppGeoEditor.py:5443 #: appEditors/AppGerberEditor.py:6772 appEditors/appGCodeEditor.py:892 #: appGUI/MainGUI.py:1088 appGUI/MainGUI.py:2484 msgid "Exit from Editor." msgstr "" #: appEditors/AppGeoEditor.py:117 appEditors/AppGeoEditor.py:3456 msgid "Geo Elem" msgstr "" #: appEditors/AppGeoEditor.py:461 appEditors/AppGeoEditor.py:713 #: appEditors/geo_plugins/GeoCirclePlugin.py:112 #: appEditors/geo_plugins/GeoCirclePlugin.py:158 appGUI/MainGUI.py:1838 msgid "Circle" msgstr "" #: appEditors/AppGeoEditor.py:482 appEditors/AppGeoEditor.py:753 #: appEditors/AppGerberEditor.py:1667 appEditors/AppGerberEditor.py:1750 #: appEditors/geo_plugins/GeoCirclePlugin.py:88 msgid "Click on Center point ..." msgstr "" #: appEditors/AppGeoEditor.py:515 msgid "Click on Center point to add a new circle or Apply to change the selection." msgstr "" #: appEditors/AppGeoEditor.py:525 appEditors/AppGerberEditor.py:1677 msgid "Click on Perimeter point to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:528 msgid "Click on Perimeter point to set axis major ..." msgstr "" #: appEditors/AppGeoEditor.py:536 msgid "Click on Perimeter point to set axis minor ..." msgstr "" #: appEditors/AppGeoEditor.py:781 appEditors/AppGerberEditor.py:1799 msgid "Click on Start point ..." msgstr "" #: appEditors/AppGeoEditor.py:783 appEditors/AppGerberEditor.py:1801 msgid "Click on Point3 ..." msgstr "" #: appEditors/AppGeoEditor.py:785 appEditors/AppGerberEditor.py:1803 msgid "Click on Stop point ..." msgstr "" #: appEditors/AppGeoEditor.py:790 appEditors/AppGerberEditor.py:1808 msgid "Click on Stop point to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:792 appEditors/AppGerberEditor.py:1810 msgid "Click on Point2 to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:794 appEditors/AppGerberEditor.py:1812 msgid "Click on Center point to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:806 appEditors/AppGerberEditor.py:1824 #: appEditors/AppGerberEditor.py:6685 appEditors/AppGerberEditor.py:6739 #: appEditors/exc_plugins/ExcCopyPlugin.py:229 appEditors/exc_plugins/ExcCopyPlugin.py:411 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:217 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:276 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:191 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:281 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:340 #: appEditors/exc_plugins/ExcSlotPlugin.py:200 appEditors/geo_plugins/GeoCopyPlugin.py:227 #: appEditors/geo_plugins/GeoCopyPlugin.py:409 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:201 msgid "Direction" msgstr "" #: appEditors/AppGeoEditor.py:820 appEditors/AppGerberEditor.py:1838 msgid "Mode: Start -> Stop -> Center. Click on Start point ..." msgstr "" #: appEditors/AppGeoEditor.py:823 appEditors/AppGerberEditor.py:1841 msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..." msgstr "" #: appEditors/AppGeoEditor.py:826 appEditors/AppGerberEditor.py:1844 msgid "Mode: Center -> Start -> Stop. Click on Center point ..." msgstr "" #: appEditors/AppGeoEditor.py:967 appGUI/MainGUI.py:1842 msgid "Arc" msgstr "" #: appEditors/AppGeoEditor.py:990 appEditors/AppGeoEditor.py:1113 #: appEditors/geo_plugins/GeoRectanglePlugin.py:145 #: appEditors/geo_plugins/GeoRectanglePlugin.py:191 appGUI/MainGUI.py:1835 msgid "Rectangle" msgstr "" #: appEditors/AppGeoEditor.py:1011 appEditors/AppGeoEditor.py:1283 #: appEditors/AppGeoEditor.py:1395 appEditors/geo_plugins/GeoRectanglePlugin.py:90 msgid "Click on 1st corner ..." msgstr "" #: appEditors/AppGeoEditor.py:1043 msgid "Click on 1st corner to add a new rectangle or Apply to change the selection." msgstr "" #: appEditors/AppGeoEditor.py:1049 msgid "Click on opposite corner to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:1234 appEditors/AppGeoEditor.py:1445 #: appEditors/AppGeoEditor.py:1658 msgid "Projected" msgstr "" #: appEditors/AppGeoEditor.py:1235 msgid "Click to complete ..." msgstr "" #: appEditors/AppGeoEditor.py:1262 appGUI/MainGUI.py:1840 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:450 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:336 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:470 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:327 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:291 appPlugins/ToolDrilling.py:2962 #: appPlugins/ToolFollow.py:740 appPlugins/ToolIsolation.py:3954 #: appPlugins/ToolMilling.py:5022 appPlugins/ToolNCC.py:4569 appPlugins/ToolPaint.py:3326 msgid "Polygon" msgstr "" #: appEditors/AppGeoEditor.py:1393 appEditors/AppGeoEditor.py:1598 #: appEditors/AppGerberEditor.py:1270 appEditors/AppGerberEditor.py:1524 msgid "Backtracked one point ..." msgstr "" #: appEditors/AppGeoEditor.py:1494 appEditors/AppGeoEditor.py:1600 #: appEditors/AppGeoEditor.py:2743 appEditors/AppGerberEditor.py:1019 msgid "Click on 1st point ..." msgstr "" #: appEditors/AppGeoEditor.py:1716 msgid "Selection not allowed. Wait ..." msgstr "" #: appEditors/AppGeoEditor.py:1821 appEditors/AppGeoEditor.py:1900 #: appEditors/AppGeoEditor.py:1945 appEditors/AppGeoEditor.py:2238 #: appEditors/AppGeoEditor.py:2285 appEditors/AppGeoEditor.py:2833 #: appEditors/AppGeoEditor.py:2859 appEditors/AppGeoEditor.py:2885 #: appEditors/AppGeoEditor.py:4540 appEditors/AppGerberEditor.py:7261 #: appEditors/AppGerberEditor.py:7301 appEditors/AppGerberEditor.py:7324 #: appEditors/AppGerberEditor.py:7469 appEditors/AppGerberEditor.py:7502 #: appEditors/AppGerberEditor.py:7545 appEditors/AppGerberEditor.py:7586 #: appEditors/AppGerberEditor.py:7622 appEditors/AppGerberEditor.py:7658 #: appEditors/geo_plugins/GeoPaintPlugin.py:103 #: appEditors/geo_plugins/GeoTransformationPlugin.py:130 #: appEditors/geo_plugins/GeoTransformationPlugin.py:155 #: appEditors/geo_plugins/GeoTransformationPlugin.py:178 #: appEditors/geo_plugins/GeoTransformationPlugin.py:318 #: appEditors/geo_plugins/GeoTransformationPlugin.py:343 #: appEditors/geo_plugins/GeoTransformationPlugin.py:378 #: appEditors/geo_plugins/GeoTransformationPlugin.py:413 #: appEditors/geo_plugins/GeoTransformationPlugin.py:444 #: appEditors/geo_plugins/GeoTransformationPlugin.py:469 msgid "No shape selected." msgstr "" #: appEditors/AppGeoEditor.py:1900 appEditors/AppGeoEditor.py:1945 #: appEditors/AppGeoEditor.py:2238 appEditors/AppGeoEditor.py:2285 msgid "Select some shapes or cancel." msgstr "" #: appEditors/AppGeoEditor.py:1909 appEditors/AppGeoEditor.py:1912 appGUI/MainGUI.py:760 #: appGUI/MainGUI.py:820 appGUI/MainGUI.py:878 appGUI/MainGUI.py:1246 appGUI/MainGUI.py:1353 #: appGUI/MainGUI.py:1872 appGUI/MainGUI.py:1938 appGUI/MainGUI.py:2640 #: appGUI/MainGUI.py:2739 appGUI/MainGUI.py:5421 appGUI/MainGUI.py:5561 #: appPlugins/ToolMove.py:20 msgid "Move" msgstr "" #: appEditors/AppGeoEditor.py:1969 appPlugins/ToolMove.py:192 msgid "Moving" msgstr "" #: appEditors/AppGeoEditor.py:2767 msgid "Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. Error" msgstr "" #: appEditors/AppGeoEditor.py:2775 msgid "No text to add." msgstr "" #: appEditors/AppGeoEditor.py:2822 msgid "Create buffer geometry ..." msgstr "" #: appEditors/AppGeoEditor.py:2826 appEditors/AppGerberEditor.py:6500 #: appEditors/AppGerberEditor.py:6788 appEditors/geo_plugins/GeoBufferPlugin.py:64 #: appEditors/geo_plugins/GeoBufferPlugin.py:345 #: appEditors/geo_plugins/GeoTransformationPlugin.py:604 appGUI/MainGUI.py:763 #: appGUI/MainGUI.py:853 appGUI/MainGUI.py:1333 appGUI/MainGUI.py:1850 #: appGUI/MainGUI.py:1895 appGUI/MainGUI.py:2719 appGUI/MainGUI.py:5556 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:257 appPlugins/ToolTransform.py:569 msgid "Buffer" msgstr "" #: appEditors/AppGeoEditor.py:2845 appEditors/AppGeoEditor.py:2871 #: appEditors/AppGeoEditor.py:2897 appEditors/AppGerberEditor.py:5951 #: appEditors/geo_plugins/GeoBufferPlugin.py:84 #: appEditors/geo_plugins/GeoBufferPlugin.py:101 #: appEditors/geo_plugins/GeoBufferPlugin.py:118 msgid "Buffer distance value is missing or wrong format. Add it and retry." msgstr "" #: appEditors/AppGeoEditor.py:2945 msgid "Simplify geometry ..." msgstr "" #: appEditors/AppGeoEditor.py:2982 appEditors/AppGerberEditor.py:2407 msgid "Select a shape to act as deletion area ..." msgstr "" #: appEditors/AppGeoEditor.py:2984 appEditors/AppGeoEditor.py:3010 #: appEditors/AppGeoEditor.py:3016 appEditors/AppGerberEditor.py:2409 msgid "Click to pick-up the erase shape..." msgstr "" #: appEditors/AppGeoEditor.py:3014 msgid "Nothing to erase." msgstr "" #: appEditors/AppGeoEditor.py:3020 appEditors/AppGerberEditor.py:2469 msgid "Click to erase ..." msgstr "" #: appEditors/AppGeoEditor.py:3099 msgid "Create Paint geometry ..." msgstr "" #: appEditors/AppGeoEditor.py:3115 appEditors/AppGerberEditor.py:3268 msgid "Shape transformations ..." msgstr "" #: appEditors/AppGeoEditor.py:3445 msgid "Multi-Line" msgstr "" #: appEditors/AppGeoEditor.py:3447 msgid "Multi-Polygon" msgstr "" #: appEditors/AppGeoEditor.py:3584 msgid "Last selected shape ID" msgstr "" #: appEditors/AppGeoEditor.py:3601 appEditors/AppGerberEditor.py:2681 #: appEditors/AppGerberEditor.py:5010 appPlugins/ToolCutOut.py:1515 #: appPlugins/ToolDistance.py:257 appPlugins/ToolExtract.py:434 #: appPlugins/ToolExtract.py:807 appPlugins/ToolExtract.py:882 appPlugins/ToolOptimal.py:216 #: appPlugins/ToolPanelize.py:1102 appPlugins/ToolQRCode.py:235 appPlugins/ToolReport.py:211 #: appPlugins/ToolSolderPaste.py:765 appPlugins/ToolSolderPaste.py:1077 #: appPlugins/ToolSub.py:312 tclCommands/TclCommandOpenSVG.py:85 #: tclCommands/TclCommandPanelize.py:425 msgid "Working" msgstr "" #: appEditors/AppGeoEditor.py:3641 appEditors/AppGeoEditor.py:5369 msgid "Change" msgstr "" #: appEditors/AppGeoEditor.py:4037 msgid "Error on inserting shapes into storage." msgstr "" #: appEditors/AppGeoEditor.py:4126 msgid "Grid Snap enabled." msgstr "" #: appEditors/AppGeoEditor.py:4130 msgid "Grid Snap disabled." msgstr "" #: appEditors/AppGeoEditor.py:4547 appGUI/MainGUI.py:3915 appGUI/MainGUI.py:3962 #: appGUI/MainGUI.py:3981 appGUI/MainGUI.py:4169 appGUI/MainGUI.py:4207 #: appGUI/MainGUI.py:4220 msgid "Click on target point." msgstr "" #: appEditors/AppGeoEditor.py:4820 appEditors/AppGeoEditor.py:4884 #: appEditors/AppGeoEditor.py:4952 appEditors/AppGeoEditor.py:4982 #: appEditors/AppGeoEditor.py:5035 appEditors/AppGeoEditor.py:5090 #: appEditors/AppGeoEditor.py:5118 appEditors/AppGeoEditor.py:5143 #: appEditors/geo_plugins/GeoBufferPlugin.py:127 #: appEditors/geo_plugins/GeoBufferPlugin.py:207 #: appEditors/geo_plugins/GeoBufferPlugin.py:273 #: appEditors/geo_plugins/GeoPaintPlugin.py:123 appPlugins/ToolCopperThieving.py:626 #: appPlugins/ToolFilm.py:692 appPlugins/ToolFilm.py:915 appPlugins/ToolRulesCheck.py:644 msgid "Working..." msgstr "" #: appEditors/AppGeoEditor.py:4821 msgid "Loading the Geometry into the Editor..." msgstr "" #: appEditors/AppGeoEditor.py:4860 msgid "Editing MultiGeo Geometry, tool" msgstr "" #: appEditors/AppGeoEditor.py:4862 appPlugins/ToolNCC.py:2485 msgid "with diameter" msgstr "" #: appEditors/AppGeoEditor.py:4931 msgid "Editor Exit. Geometry object was updated ..." msgstr "" #: appEditors/AppGeoEditor.py:4987 appEditors/AppGeoEditor.py:5042 msgid "A selection of minimum two items is required to do Intersection." msgstr "" #: appEditors/AppGeoEditor.py:5250 appGUI/ObjectUI.py:914 msgid "Geometry Editor" msgstr "" #: appEditors/AppGeoEditor.py:5271 msgid "Tool dia" msgstr "" #: appEditors/AppGeoEditor.py:5273 msgid "Edited tool diameter." msgstr "" #: appEditors/AppGeoEditor.py:5287 msgid "Geometry Table" msgstr "" #: appEditors/AppGeoEditor.py:5289 msgid "The list of geometry elements inside the edited object." msgstr "" #: appEditors/AppGeoEditor.py:5302 appEditors/AppGerberEditor.py:4599 #: appEditors/AppGerberEditor.py:6206 appEditors/AppGerberEditor.py:6279 #: appEditors/AppGerberEditor.py:6652 appEditors/exc_plugins/ExcCopyPlugin.py:197 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:176 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:241 #: appEditors/geo_plugins/GeoCopyPlugin.py:195 #: appEditors/geo_plugins/GeoRectanglePlugin.py:268 appGUI/ObjectUI.py:322 #: appGUI/ObjectUI.py:1601 appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:56 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:167 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:57 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:116 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:40 #: appPlugins/ToolCopperThieving.py:1367 appPlugins/ToolCutOut.py:2316 #: appPlugins/ToolCutOut.py:2502 appPlugins/ToolDblSided.py:1039 #: appPlugins/ToolExtract.py:1101 appPlugins/ToolFilm.py:1279 appPlugins/ToolFilm.py:1350 #: appPlugins/ToolFilm.py:1420 appPlugins/ToolImage.py:593 appPlugins/ToolIsolation.py:3895 #: appPlugins/ToolMarkers.py:1294 appPlugins/ToolMarkers.py:1556 #: appPlugins/ToolMilling.py:3963 appPlugins/ToolNCC.py:4073 appPlugins/ToolNCC.py:4540 #: appPlugins/ToolObjectDistance.py:461 appPlugins/ToolPaint.py:2956 #: appPlugins/ToolPaint.py:3296 appPlugins/ToolPunchGerber.py:2113 #: appPlugins/ToolPunchGerber.py:2324 appPlugins/ToolTransform.py:630 msgid "Type" msgstr "" #: appEditors/AppGeoEditor.py:5325 appEditors/AppGerberEditor.py:6344 msgid "Zoom on selection" msgstr "" #: appEditors/AppGeoEditor.py:5329 appEditors/AppGerberEditor.py:6353 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:163 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:225 #: appEditors/exc_plugins/ExcSlotPlugin.py:170 appEditors/geo_plugins/GeoBufferPlugin.py:356 #: appEditors/geo_plugins/GeoPaintPlugin.py:231 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:225 #: appEditors/geo_plugins/GeoTextPlugin.py:216 #: appEditors/geo_plugins/GeoTransformationPlugin.py:618 appGUI/ObjectUI.py:1270 #: appGUI/ObjectUI.py:1585 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:26 #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:28 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:25 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:27 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:411 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:79 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:25 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:27 #: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:28 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:29 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:137 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:28 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:27 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:27 #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:27 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:27 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:26 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:28 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:183 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:25 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:25 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:27 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:28 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:26 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:28 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:27 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:28 #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:24 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:28 #: appPlugins/ToolAlignObjects.py:488 appPlugins/ToolCopperThieving.py:1292 #: appPlugins/ToolCutOut.py:2393 appPlugins/ToolDistance.py:832 #: appPlugins/ToolEtchCompensation.py:385 appPlugins/ToolFiducials.py:1044 #: appPlugins/ToolFilm.py:1510 appPlugins/ToolFollow.py:709 appPlugins/ToolImage.py:522 #: appPlugins/ToolImage.py:854 appPlugins/ToolInvertGerber.py:237 #: appPlugins/ToolLevelling.py:1832 appPlugins/ToolMarkers.py:1283 #: appPlugins/ToolObjectDistance.py:447 appPlugins/ToolOptimal.py:504 #: appPlugins/ToolPanelize.py:1327 appPlugins/ToolQRCode.py:794 #: appPlugins/ToolSolderPaste.py:1347 appPlugins/ToolSub.py:803 #: appPlugins/ToolTransform.py:586 msgid "Parameters" msgstr "" #: appEditors/AppGeoEditor.py:5332 appEditors/AppGerberEditor.py:6355 msgid "Geometry parameters." msgstr "" #: appEditors/AppGeoEditor.py:5346 msgid "Is Valid" msgstr "" #: appEditors/AppGeoEditor.py:5353 msgid "Is Empty" msgstr "" #: appEditors/AppGeoEditor.py:5360 msgid "Is Ring" msgstr "" #: appEditors/AppGeoEditor.py:5367 msgid "Is CCW" msgstr "" #: appEditors/AppGeoEditor.py:5372 msgid "" "Change the orientation of the geometric element.\n" "Works for LinearRing and Polygons." msgstr "" #: appEditors/AppGeoEditor.py:5380 msgid "Is Simple" msgstr "" #: appEditors/AppGeoEditor.py:5387 appEditors/exc_plugins/ExcSlotArrayPlugin.py:177 #: appEditors/exc_plugins/ExcSlotPlugin.py:186 #: appEditors/geo_plugins/GeoRectanglePlugin.py:304 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:185 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:63 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:123 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:68 #: appObjects/AppObjectTemplate.py:942 appPlugins/ToolFilm.py:1356 #: appPlugins/ToolFilm.py:1427 appPlugins/ToolMarkers.py:1322 appPlugins/ToolReport.py:594 msgid "Length" msgstr "" #: appEditors/AppGeoEditor.py:5389 msgid "The length of the geometry element." msgstr "" #: appEditors/AppGeoEditor.py:5401 appEditors/AppGerberEditor.py:6387 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:192 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:83 appPlugins/ToolDistance.py:863 #: appPlugins/ToolFiducials.py:950 appPlugins/ToolFiducials.py:966 #: appPlugins/ToolMarkers.py:1468 appPlugins/ToolObjectDistance.py:476 msgid "Coordinates" msgstr "" #: appEditors/AppGeoEditor.py:5403 appEditors/AppGeoEditor.py:5416 #: appEditors/AppGerberEditor.py:6389 appEditors/AppGerberEditor.py:6395 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:194 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:209 msgid "The coordinates of the selected geometry element." msgstr "" #: appEditors/AppGeoEditor.py:5425 appEditors/AppGerberEditor.py:6400 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:214 msgid "Vertex Points" msgstr "" #: appEditors/AppGeoEditor.py:5427 appEditors/AppGerberEditor.py:6402 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:216 msgid "The number of vertex points in the selected geometry element." msgstr "" #: appEditors/AppGerberEditor.py:212 appEditors/AppGerberEditor.py:418 #: appEditors/AppGerberEditor.py:1347 msgid "You need to preselect a aperture in the Aperture Table that has a size." msgstr "" #: appEditors/AppGerberEditor.py:225 appEditors/AppGerberEditor.py:428 msgid "Aperture size is zero. It needs to be greater than zero." msgstr "" #: appEditors/AppGerberEditor.py:378 appEditors/AppGerberEditor.py:734 msgid "Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'." msgstr "" #: appEditors/AppGerberEditor.py:500 msgid "Click on the Pad Circular Array Start position" msgstr "" #: appEditors/AppGerberEditor.py:535 msgid "The value is not Float. Check for comma instead of dot separator." msgstr "" #: appEditors/AppGerberEditor.py:538 msgid "The value is mistyped. Check the value." msgstr "" #: appEditors/AppGerberEditor.py:864 msgid "Select shape(s) and then click ..." msgstr "" #: appEditors/AppGerberEditor.py:876 msgid "Failed. Nothing selected." msgstr "" #: appEditors/AppGerberEditor.py:892 msgid "Failed. Poligonize works only on geometries belonging to the same aperture." msgstr "" #: appEditors/AppGerberEditor.py:1017 appEditors/AppGerberEditor.py:1287 #: appEditors/AppGerberEditor.py:1311 msgid "Corner Mode 1: 45 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1275 appEditors/AppGerberEditor.py:1308 msgid "Corner Mode 2: Reverse 45 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1278 appEditors/AppGerberEditor.py:1305 msgid "Corner Mode 3: 90 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1281 appEditors/AppGerberEditor.py:1302 msgid "Corner Mode 4: Reverse 90 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1284 appEditors/AppGerberEditor.py:1299 msgid "Corner Mode 5: Free angle ..." msgstr "" #: appEditors/AppGerberEditor.py:1379 appEditors/AppGerberEditor.py:1564 #: appEditors/AppGerberEditor.py:1603 msgid "Track Mode 1: 45 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1544 appEditors/AppGerberEditor.py:1598 msgid "Track Mode 2: Reverse 45 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1549 appEditors/AppGerberEditor.py:1593 msgid "Track Mode 3: 90 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1554 appEditors/AppGerberEditor.py:1588 msgid "Track Mode 4: Reverse 90 degrees ..." msgstr "" #: appEditors/AppGerberEditor.py:1559 appEditors/AppGerberEditor.py:1583 msgid "Track Mode 5: Free angle ..." msgstr "" #: appEditors/AppGerberEditor.py:2035 msgid "Scale the selected Gerber apertures ..." msgstr "" #: appEditors/AppGerberEditor.py:2077 msgid "Buffer the selected apertures ..." msgstr "" #: appEditors/AppGerberEditor.py:2119 msgid "Mark polygon areas in the edited Gerber ..." msgstr "" #: appEditors/AppGerberEditor.py:2185 msgid "Nothing selected to move" msgstr "" #: appEditors/AppGerberEditor.py:2861 msgid "Select shapes to import them into the edited object." msgstr "" #: appEditors/AppGerberEditor.py:3088 appEditors/AppGerberEditor.py:3170 #: appPlugins/ToolIsolation.py:2531 appPlugins/ToolIsolation.py:2696 #: appPlugins/ToolPaint.py:1263 msgid "Added polygon" msgstr "" #: appEditors/AppGerberEditor.py:3090 appEditors/AppGerberEditor.py:3172 #: appPlugins/ToolIsolation.py:2532 appPlugins/ToolIsolation.py:2698 #: appPlugins/ToolPaint.py:1265 msgid "Click to add next polygon or right click to start." msgstr "" #: appEditors/AppGerberEditor.py:3093 appEditors/AppGerberEditor.py:3175 #: appPlugins/ToolIsolation.py:2701 msgid "No polygon in selection." msgstr "" #: appEditors/AppGerberEditor.py:3777 appEditors/AppGerberEditor.py:3781 msgid "Aperture code value is missing or wrong format. Add it and retry." msgstr "" #: appEditors/AppGerberEditor.py:3793 msgid "Aperture size value is missing or wrong format. Add it and retry." msgstr "" #: appEditors/AppGerberEditor.py:3812 appEditors/AppGerberEditor.py:3853 msgid "Aperture already in the aperture table." msgstr "" #: appEditors/AppGerberEditor.py:3839 msgid "" "Aperture dimensions value is missing or wrong format. Add it in format (width, height) " "and retry." msgstr "" #: appEditors/AppGerberEditor.py:3860 msgid "Added new aperture with code" msgstr "" #: appEditors/AppGerberEditor.py:3895 msgid "Select an aperture in Aperture Table" msgstr "" #: appEditors/AppGerberEditor.py:3903 msgid "Select an aperture in Aperture Table -->" msgstr "" #: appEditors/AppGerberEditor.py:3921 msgid "Deleted aperture with code" msgstr "" #: appEditors/AppGerberEditor.py:3991 msgid "Dimensions need two float values separated by comma." msgstr "" #: appEditors/AppGerberEditor.py:4000 msgid "Dimensions edited." msgstr "" #: appEditors/AppGerberEditor.py:4134 appEditors/AppGerberEditor.py:6438 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:97 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:251 appGUI/MainGUI.py:1269 #: appGUI/ObjectUI.py:1147 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:76 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:299 appObjects/GeometryObject.py:521 #: appPlugins/ToolIsolation.py:3823 msgid "Simplify" msgstr "" #: appEditors/AppGerberEditor.py:4599 appEditors/AppGerberEditor.py:6206 #: appEditors/AppGerberEditor.py:6251 appGUI/ObjectUI.py:322 appPlugins/ToolExtract.py:1101 #: appPlugins/ToolPunchGerber.py:2113 msgid "Code" msgstr "" #: appEditors/AppGerberEditor.py:4599 appEditors/AppGerberEditor.py:6206 #: appEditors/exc_plugins/ExcCopyPlugin.py:187 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:191 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:255 #: appEditors/geo_plugins/GeoCopyPlugin.py:185 #: appEditors/geo_plugins/GeoRectanglePlugin.py:292 #: appEditors/geo_plugins/GeoTextPlugin.py:262 appGUI/ObjectUI.py:322 #: appGUI/ObjectUI.py:1619 appGUI/preferences/general/GeneralAPPSetGroupUI.py:110 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:195 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:234 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:40 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:150 #: appPlugins/ToolCopperThieving.py:1495 appPlugins/ToolCopperThieving.py:1541 #: appPlugins/ToolCutOut.py:2486 appPlugins/ToolExtract.py:1101 #: appPlugins/ToolFiducials.py:1057 appPlugins/ToolPunchGerber.py:2113 msgid "Size" msgstr "" #: appEditors/AppGerberEditor.py:4599 appEditors/AppGerberEditor.py:6206 #: appGUI/ObjectUI.py:322 msgid "Dim" msgstr "" #: appEditors/AppGerberEditor.py:4718 appMain.py:8254 appObjects/CNCJobObject.py:779 #: appObjects/ScriptObject.py:131 appPlugins/ToolLevelling.py:1500 msgid "Loading" msgstr "" #: appEditors/AppGerberEditor.py:4858 msgid "Setting up the UI" msgstr "" #: appEditors/AppGerberEditor.py:4859 msgid "Adding geometry finished. Preparing the GUI" msgstr "" #: appEditors/AppGerberEditor.py:4868 msgid "Finished loading the Gerber object into the editor." msgstr "" #: appEditors/AppGerberEditor.py:5000 msgid "There are no Aperture definitions in the file. Aborting Gerber creation." msgstr "" #: appEditors/AppGerberEditor.py:5038 msgid "No aperture is selected." msgstr "" #: appEditors/AppGerberEditor.py:5259 appMain.py:7637 appMain.py:7659 #: appObjects/ExcellonObject.py:552 appPlugins/ToolDrilling.py:1698 #: appPlugins/ToolMilling.py:3784 msgid "Copied to clipboard." msgstr "" #: appEditors/AppGerberEditor.py:5625 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:366 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:340 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:305 appMain.py:5374 #: appObjects/AppObject.py:353 appObjects/AppObjectTemplate.py:187 #: appObjects/AppObjectTemplate.py:361 appObjects/AppObjectTemplate.py:392 #: appObjects/AppObjectTemplate.py:408 appObjects/CNCJobObject.py:685 #: appObjects/GerberObject.py:1039 appPlugins/ToolCopperThieving.py:1155 #: appPlugins/ToolFiducials.py:706 appPlugins/ToolMarkers.py:1077 appPlugins/ToolMove.py:163 #: appPlugins/ToolQRCode.py:539 msgid "Plotting" msgstr "" #: appEditors/AppGerberEditor.py:5805 msgid "Failed. No aperture geometry is selected." msgstr "" #: appEditors/AppGerberEditor.py:5899 appEditors/exc_plugins/ExcCopyPlugin.py:507 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:350 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:414 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:434 #: appEditors/geo_plugins/GeoCopyPlugin.py:505 msgid "Click on the circular array Center position" msgstr "" #: appEditors/AppGerberEditor.py:5980 msgid "No aperture to buffer. Select at least one aperture and try again." msgstr "" #: appEditors/AppGerberEditor.py:6011 msgid "Scale factor value is missing or wrong format. Add it and retry." msgstr "" #: appEditors/AppGerberEditor.py:6043 msgid "No aperture to scale. Select at least one aperture and try again." msgstr "" #: appEditors/AppGerberEditor.py:6095 msgid "Polygons marked." msgstr "" #: appEditors/AppGerberEditor.py:6097 msgid "No polygons were marked. None fit within the limits." msgstr "" #: appEditors/AppGerberEditor.py:6160 appGUI/MainGUI.py:825 appGUI/MainGUI.py:1875 #: appGUI/ObjectUI.py:244 msgid "Gerber Editor" msgstr "" #: appEditors/AppGerberEditor.py:6193 appGUI/ObjectUI.py:287 #: appObjects/AppObjectTemplate.py:549 appPlugins/ToolReport.py:174 msgid "Apertures" msgstr "" #: appEditors/AppGerberEditor.py:6195 appGUI/ObjectUI.py:289 msgid "Apertures Table for the Gerber Object." msgstr "" #: appEditors/AppGerberEditor.py:6211 appGUI/ObjectUI.py:326 msgid "Index" msgstr "" #: appEditors/AppGerberEditor.py:6213 appGUI/ObjectUI.py:328 appPlugins/ToolExtract.py:1108 #: appPlugins/ToolPunchGerber.py:2120 msgid "Aperture Code" msgstr "" #: appEditors/AppGerberEditor.py:6215 appGUI/ObjectUI.py:330 appPlugins/ToolExtract.py:1110 #: appPlugins/ToolPunchGerber.py:2122 msgid "Type of aperture: circular, rectangle, macros etc" msgstr "" #: appEditors/AppGerberEditor.py:6217 appGUI/ObjectUI.py:332 appPlugins/ToolExtract.py:1112 #: appPlugins/ToolPunchGerber.py:2124 msgid "Aperture Size:" msgstr "" #: appEditors/AppGerberEditor.py:6219 appGUI/ObjectUI.py:334 msgid "" "Aperture Dimensions:\n" " - (width, height) for R, O type.\n" " - (dia, nVertices) for P type" msgstr "" #: appEditors/AppGerberEditor.py:6244 msgid "Add/Delete Aperture" msgstr "" #: appEditors/AppGerberEditor.py:6246 msgid "Add/Delete an aperture in the aperture table" msgstr "" #: appEditors/AppGerberEditor.py:6252 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:59 msgid "Code for the new aperture" msgstr "" #: appEditors/AppGerberEditor.py:6262 msgid "Size:" msgstr "" #: appEditors/AppGerberEditor.py:6264 msgid "" "Size for the new aperture.\n" "If aperture type is 'R' or 'O' then\n" "this value is automatically\n" "calculated as:\n" "sqrt(width**2 + height**2)" msgstr "" #: appEditors/AppGerberEditor.py:6281 msgid "" "Select the type of new aperture. Can be:\n" "C = circular\n" "R = rectangular\n" "O = oblong" msgstr "" #: appEditors/AppGerberEditor.py:6294 msgid "Dims" msgstr "" #: appEditors/AppGerberEditor.py:6296 msgid "" "Dimensions for the new aperture.\n" "The format is (width, height)" msgstr "" #: appEditors/AppGerberEditor.py:6318 msgid "Add a new aperture to the aperture list." msgstr "" #: appEditors/AppGerberEditor.py:6327 msgid "Delete a aperture in the aperture list" msgstr "" #: appEditors/AppGerberEditor.py:6362 msgid "Valid" msgstr "" #: appEditors/AppGerberEditor.py:6364 msgid "Show if the selected polygon is valid." msgstr "" #: appEditors/AppGerberEditor.py:6371 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:83 #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:124 #: appPlugins/ToolCalculators.py:685 appPlugins/ToolCalculators.py:729 #: appPlugins/ToolCopperThieving.py:1332 msgid "Area" msgstr "" #: appEditors/AppGerberEditor.py:6373 msgid "Show the area of the selected polygon." msgstr "" #: appEditors/AppGerberEditor.py:6377 #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:46 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:198 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:45 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:41 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:102 appPlugins/ToolCalculators.py:538 #: appPlugins/ToolCopperThieving.py:1344 appPlugins/ToolImage.py:567 #: appPlugins/ToolPcbWizard.py:479 msgid "mm" msgstr "" #: appEditors/AppGerberEditor.py:6377 appPlugins/ToolCopperThieving.py:1346 #: appPlugins/ToolCopperThieving.py:1707 appPlugins/ToolImage.py:567 msgid "in" msgstr "" #: appEditors/AppGerberEditor.py:6416 appEditors/geo_plugins/GeoSimplificationPlugin.py:167 #: appGUI/MainGUI.py:767 appGUI/MainGUI.py:1848 appGUI/ObjectUI.py:1095 msgid "Simplification" msgstr "" #: appEditors/AppGerberEditor.py:6418 appGUI/ObjectUI.py:1097 msgid "Simplify a geometry by reducing its vertex points number." msgstr "" #: appEditors/AppGerberEditor.py:6423 appEditors/geo_plugins/GeoSimplificationPlugin.py:237 #: appGUI/ObjectUI.py:1133 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:85 msgid "Tolerance" msgstr "" #: appEditors/AppGerberEditor.py:6425 appEditors/geo_plugins/GeoSimplificationPlugin.py:239 #: appGUI/ObjectUI.py:1135 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:301 #: appPlugins/ToolIsolation.py:3825 msgid "" "All points in the simplified object will be\n" "within the tolerance distance of the original geometry." msgstr "" #: appEditors/AppGerberEditor.py:6441 appEditors/geo_plugins/GeoSimplificationPlugin.py:254 #: appGUI/ObjectUI.py:1150 msgid "Simplify a geometry element by reducing its vertex points number." msgstr "" #: appEditors/AppGerberEditor.py:6458 msgid "Buffer Aperture" msgstr "" #: appEditors/AppGerberEditor.py:6460 msgid "Buffer a aperture in the aperture list" msgstr "" #: appEditors/AppGerberEditor.py:6473 appEditors/geo_plugins/GeoBufferPlugin.py:382 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:226 msgid "Buffer distance" msgstr "" #: appEditors/AppGerberEditor.py:6477 appEditors/geo_plugins/GeoBufferPlugin.py:385 msgid "Buffer corner" msgstr "" #: appEditors/AppGerberEditor.py:6479 msgid "" "There are 3 types of corners:\n" " - 'Round': the corner is rounded.\n" " - 'Square': the corner is met in a sharp angle.\n" " - 'Beveled': the corner is a line that directly connects the features meeting in the " "corner" msgstr "" #: appEditors/AppGerberEditor.py:6485 appEditors/geo_plugins/GeoBufferPlugin.py:393 #: appEditors/geo_plugins/GeoRectanglePlugin.py:276 msgid "Round" msgstr "" #: appEditors/AppGerberEditor.py:6486 appEditors/geo_plugins/GeoBufferPlugin.py:394 #: appEditors/geo_plugins/GeoRectanglePlugin.py:277 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:59 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:188 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:77 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:59 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:185 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:140 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:449 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:335 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:469 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:326 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290 appPlugins/ToolDrilling.py:2961 #: appPlugins/ToolExtract.py:1073 appPlugins/ToolExtract.py:1218 #: appPlugins/ToolFollow.py:739 appPlugins/ToolInvertGerber.py:272 #: appPlugins/ToolIsolation.py:3953 appPlugins/ToolMilling.py:5021 #: appPlugins/ToolNCC.py:4568 appPlugins/ToolPaint.py:3325 #: appPlugins/ToolPunchGerber.py:2085 appPlugins/ToolPunchGerber.py:2251 #: appPlugins/ToolQRCode.py:894 msgid "Square" msgstr "" #: appEditors/AppGerberEditor.py:6487 appEditors/geo_plugins/GeoBufferPlugin.py:395 #: appEditors/geo_plugins/GeoRectanglePlugin.py:278 msgid "Beveled" msgstr "" #: appEditors/AppGerberEditor.py:6516 msgid "Scale Aperture" msgstr "" #: appEditors/AppGerberEditor.py:6518 msgid "Scale a aperture in the aperture list" msgstr "" #: appEditors/AppGerberEditor.py:6526 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:251 msgid "Scale factor" msgstr "" #: appEditors/AppGerberEditor.py:6528 msgid "" "The factor by which to scale the selected aperture.\n" "Values can be between 0.0000 and 999.9999" msgstr "" #: appEditors/AppGerberEditor.py:6544 appEditors/AppGerberEditor.py:6785 #: appEditors/geo_plugins/GeoTransformationPlugin.py:601 appGUI/MainGUI.py:856 #: appGUI/MainGUI.py:1335 appGUI/MainGUI.py:1897 appGUI/MainGUI.py:2721 #: appGUI/MainGUI.py:5565 appGUI/ObjectUI.py:121 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:42 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:171 appPlugins/ToolFilm.py:1342 #: appPlugins/ToolTransform.py:566 msgid "Scale" msgstr "" #: appEditors/AppGerberEditor.py:6565 msgid "Mark polygons" msgstr "" #: appEditors/AppGerberEditor.py:6567 msgid "Mark the polygon areas." msgstr "" #: appEditors/AppGerberEditor.py:6576 msgid "Area UPPER threshold" msgstr "" #: appEditors/AppGerberEditor.py:6578 msgid "" "The threshold value, all areas less than this are marked.\n" "Can have a value between 0.0000 and 10000.0000" msgstr "" #: appEditors/AppGerberEditor.py:6589 msgid "Area LOWER threshold" msgstr "" #: appEditors/AppGerberEditor.py:6591 msgid "" "The threshold value, all areas more than this are marked.\n" "Can have a value between 0.0000 and 10000.0000" msgstr "" #: appEditors/AppGerberEditor.py:6605 msgid "Mark" msgstr "" #: appEditors/AppGerberEditor.py:6608 msgid "Mark the polygons that fit within limits." msgstr "" #: appEditors/AppGerberEditor.py:6615 msgid "Delete all the marked polygons." msgstr "" #: appEditors/AppGerberEditor.py:6622 msgid "Clear all the markings." msgstr "" #: appEditors/AppGerberEditor.py:6645 appGUI/MainGUI.py:833 appGUI/MainGUI.py:1318 #: appGUI/MainGUI.py:2704 appGUI/MainGUI.py:5555 msgid "Add Pad Array" msgstr "" #: appEditors/AppGerberEditor.py:6647 msgid "Add an array of pads (linear or circular array)" msgstr "" #: appEditors/AppGerberEditor.py:6654 msgid "" "Select the type of pads array to create.\n" "It can be Linear X(Y) or Circular" msgstr "" #: appEditors/AppGerberEditor.py:6658 appEditors/exc_plugins/ExcCopyPlugin.py:204 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:183 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:248 #: appEditors/geo_plugins/GeoCopyPlugin.py:202 msgid "Linear" msgstr "" #: appEditors/AppGerberEditor.py:6659 appEditors/exc_plugins/ExcCopyPlugin.py:206 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:184 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:249 #: appEditors/geo_plugins/GeoCopyPlugin.py:204 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:43 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:162 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:99 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:43 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:159 #: appPlugins/ToolExtract.py:1057 appPlugins/ToolExtract.py:1192 #: appPlugins/ToolFiducials.py:1116 appPlugins/ToolPunchGerber.py:2069 #: appPlugins/ToolPunchGerber.py:2225 msgid "Circular" msgstr "" #: appEditors/AppGerberEditor.py:6665 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:96 msgid "Nr of pads" msgstr "" #: appEditors/AppGerberEditor.py:6667 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:98 msgid "Specify how many pads to be in the array." msgstr "" #: appEditors/AppGerberEditor.py:6687 appEditors/exc_plugins/ExcCopyPlugin.py:231 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:219 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:283 #: appEditors/geo_plugins/GeoCopyPlugin.py:229 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:93 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:263 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:134 msgid "" "Direction on which the linear array is oriented:\n" "- 'X' - horizontal axis \n" "- 'Y' - vertical axis or \n" "- 'Angle' - a custom angle for the array inclination" msgstr "" #: appEditors/AppGerberEditor.py:6693 appEditors/exc_plugins/ExcCopyPlugin.py:238 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:147 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:226 #: appEditors/exc_plugins/ExcDrillPlugin.py:154 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:145 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:199 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:290 #: appEditors/exc_plugins/ExcSlotPlugin.py:154 appEditors/exc_plugins/ExcSlotPlugin.py:208 #: appEditors/geo_plugins/GeoCirclePlugin.py:196 appEditors/geo_plugins/GeoCopyPlugin.py:236 #: appEditors/geo_plugins/GeoRectanglePlugin.py:241 appGUI/GUIElements.py:5464 #: appGUI/MainGUI.py:531 appGUI/MainGUI.py:747 appGUI/MainGUI.py:4733 appGUI/MainGUI.py:5313 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:99 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:210 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:269 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:140 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:166 appPlugins/ToolFilm.py:1489 msgid "X" msgstr "" #: appEditors/AppGerberEditor.py:6694 appEditors/exc_plugins/ExcCopyPlugin.py:239 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:155 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:227 #: appEditors/exc_plugins/ExcDrillPlugin.py:162 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:153 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:200 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:291 #: appEditors/exc_plugins/ExcSlotPlugin.py:162 appEditors/exc_plugins/ExcSlotPlugin.py:209 #: appEditors/geo_plugins/GeoCirclePlugin.py:204 appEditors/geo_plugins/GeoCopyPlugin.py:237 #: appEditors/geo_plugins/GeoRectanglePlugin.py:249 appGUI/GUIElements.py:5471 #: appGUI/MainGUI.py:534 appGUI/MainGUI.py:4734 appGUI/MainGUI.py:5314 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:100 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:211 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:270 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:141 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:167 appPlugins/ToolFilm.py:1490 msgid "Y" msgstr "" #: appEditors/AppGerberEditor.py:6695 appEditors/AppGerberEditor.py:6715 #: appEditors/AppGerberEditor.py:6752 appEditors/AppGerberEditor.py:6849 #: appEditors/exc_plugins/ExcCopyPlugin.py:240 appEditors/exc_plugins/ExcCopyPlugin.py:260 #: appEditors/exc_plugins/ExcCopyPlugin.py:424 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:228 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:248 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:289 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:201 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:207 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:292 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:312 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:352 #: appEditors/exc_plugins/ExcSlotPlugin.py:210 appEditors/exc_plugins/ExcSlotPlugin.py:216 #: appEditors/geo_plugins/GeoCirclePlugin.py:241 appEditors/geo_plugins/GeoCopyPlugin.py:238 #: appEditors/geo_plugins/GeoCopyPlugin.py:258 appEditors/geo_plugins/GeoCopyPlugin.py:422 #: appEditors/geo_plugins/GeoTransformationPlugin.py:683 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:101 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:120 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:212 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:217 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:271 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:292 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:142 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:160 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:123 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:102 appPlugins/ToolDistance.py:942 #: appPlugins/ToolDistance.py:955 appPlugins/ToolFilm.py:1427 #: appPlugins/ToolObjectDistance.py:555 appPlugins/ToolTransform.py:676 msgid "Angle" msgstr "" #: appEditors/AppGerberEditor.py:6701 appEditors/exc_plugins/ExcCopyPlugin.py:247 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:235 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:298 #: appEditors/geo_plugins/GeoCopyPlugin.py:245 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:107 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:277 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:148 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:295 appPlugins/ToolCutOut.py:2763 msgid "Pitch" msgstr "" #: appEditors/AppGerberEditor.py:6703 appEditors/exc_plugins/ExcCopyPlugin.py:249 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:237 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:300 #: appEditors/geo_plugins/GeoCopyPlugin.py:247 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:109 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:279 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:150 msgid "Pitch = Distance between elements of the array." msgstr "" #: appEditors/AppGerberEditor.py:6717 appEditors/exc_plugins/ExcCopyPlugin.py:262 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:250 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:314 #: appEditors/geo_plugins/GeoCopyPlugin.py:260 msgid "" "Angle at which the linear array is placed.\n" "The precision is of max 2 decimals.\n" "Min value is: -360.00 degrees.\n" "Max value is: 360.00 degrees." msgstr "" #: appEditors/AppGerberEditor.py:6741 appEditors/exc_plugins/ExcCopyPlugin.py:413 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:278 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:341 #: appEditors/geo_plugins/GeoCopyPlugin.py:411 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:148 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:320 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:188 msgid "" "Direction for circular array.\n" "Can be CW = clockwise or CCW = counter clockwise." msgstr "" #: appEditors/AppGerberEditor.py:6745 appEditors/exc_plugins/ExcCopyPlugin.py:417 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:282 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:345 #: appEditors/geo_plugins/GeoCopyPlugin.py:415 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:152 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:324 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:192 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:371 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:404 msgid "CW" msgstr "" #: appEditors/AppGerberEditor.py:6746 appEditors/exc_plugins/ExcCopyPlugin.py:418 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:283 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:346 #: appEditors/geo_plugins/GeoCopyPlugin.py:416 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:153 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:325 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:193 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:372 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:405 msgid "CCW" msgstr "" #: appEditors/AppGerberEditor.py:6754 appEditors/exc_plugins/ExcCopyPlugin.py:425 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:290 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:353 #: appEditors/geo_plugins/GeoCopyPlugin.py:423 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:122 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:161 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:294 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:333 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:162 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:201 msgid "Angle at which each element in circular array is placed." msgstr "" #: appEditors/AppGerberEditor.py:6782 appEditors/AppGerberEditor.py:7225 #: appEditors/geo_plugins/GeoTransformationPlugin.py:90 #: appEditors/geo_plugins/GeoTransformationPlugin.py:598 appGUI/MainGUI.py:775 #: appPlugins/ToolTransform.py:81 appPlugins/ToolTransform.py:563 msgid "Transformation" msgstr "" #: appEditors/AppGerberEditor.py:6783 appEditors/AppGerberEditor.py:6865 #: appEditors/geo_plugins/GeoTransformationPlugin.py:599 #: appEditors/geo_plugins/GeoTransformationPlugin.py:699 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:88 appPlugins/ToolTransform.py:564 #: appPlugins/ToolTransform.py:692 msgid "Rotate" msgstr "" #: appEditors/AppGerberEditor.py:6784 appEditors/geo_plugins/GeoTransformationPlugin.py:600 #: appPlugins/ToolTransform.py:565 msgid "Skew/Shear" msgstr "" #: appEditors/AppGerberEditor.py:6786 appEditors/geo_plugins/GeoTransformationPlugin.py:602 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:160 appPlugins/ToolDblSided.py:995 #: appPlugins/ToolFilm.py:1483 appPlugins/ToolTransform.py:567 msgid "Mirror" msgstr "" #: appEditors/AppGerberEditor.py:6809 appEditors/geo_plugins/GeoTransformationPlugin.py:631 #: appGUI/GUIElements.py:4462 appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:89 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:147 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:94 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:42 appPlugins/ToolDblSided.py:874 #: appPlugins/ToolDblSided.py:1059 appPlugins/ToolFilm.py:1382 appPlugins/ToolFilm.py:1453 #: appPlugins/ToolMarkers.py:1348 appPlugins/ToolPanelize.py:1201 #: appPlugins/ToolTransform.py:598 msgid "Reference" msgstr "" #: appEditors/AppGerberEditor.py:6811 appEditors/geo_plugins/GeoTransformationPlugin.py:633 msgid "" "The reference point for Rotate, Skew, Scale, Mirror.\n" "Can be:\n" "- Origin -> it is the 0, 0 point\n" "- Selection -> the center of the bounding box of the selected objects\n" "- Point -> a custom point defined by X,Y coordinates\n" "- Min Selection -> the point (minx, miny) of the bounding box of the selection" msgstr "" #: appEditors/AppGerberEditor.py:6819 appEditors/geo_plugins/GeoTransformationPlugin.py:641 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52 appPlugins/ToolTransform.py:608 msgid "Origin" msgstr "" #: appEditors/AppGerberEditor.py:6819 appEditors/AppGerberEditor.py:7234 #: appEditors/geo_plugins/GeoTransformationPlugin.py:103 #: appEditors/geo_plugins/GeoTransformationPlugin.py:641 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:266 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:120 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:313 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:310 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:257 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52 appPlugins/ToolFiducials.py:1142 #: appPlugins/ToolFollow.py:720 appPlugins/ToolIsolation.py:3877 #: appPlugins/ToolMarkers.py:1439 appPlugins/ToolNCC.py:4529 appPlugins/ToolPaint.py:3276 #: appPlugins/ToolPunchGerber.py:2313 appPlugins/ToolTransform.py:608 defaults.py:631 msgid "Selection" msgstr "" #: appEditors/AppGerberEditor.py:6819 appEditors/geo_plugins/GeoTransformationPlugin.py:641 #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:58 appPlugins/ToolDblSided.py:885 #: appPlugins/ToolTransform.py:608 msgid "Point" msgstr "" #: appEditors/AppGerberEditor.py:6819 appEditors/geo_plugins/GeoTransformationPlugin.py:641 msgid "Minimum" msgstr "" #: appEditors/AppGerberEditor.py:6825 appEditors/AppGerberEditor.py:7121 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:125 #: appEditors/exc_plugins/ExcDrillPlugin.py:132 #: appEditors/exc_plugins/ExcResizePlugin.py:124 #: appEditors/exc_plugins/ExcResizePlugin.py:143 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:123 #: appEditors/exc_plugins/ExcSlotPlugin.py:132 appEditors/geo_plugins/GeoCirclePlugin.py:276 #: appEditors/geo_plugins/GeoTransformationPlugin.py:647 #: appEditors/geo_plugins/GeoTransformationPlugin.py:985 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:136 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:73 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:133 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:48 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:70 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:92 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:114 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:148 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:170 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:192 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:227 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:261 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:283 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:296 appMain.py:9189 #: appPlugins/ToolExtract.py:1276 appPlugins/ToolExtract.py:1305 #: appPlugins/ToolPunchGerber.py:2192 appPlugins/ToolPunchGerber.py:2300 #: appPlugins/ToolRulesCheck.py:1473 appPlugins/ToolRulesCheck.py:1497 #: appPlugins/ToolRulesCheck.py:1522 appPlugins/ToolRulesCheck.py:1547 #: appPlugins/ToolRulesCheck.py:1584 appPlugins/ToolRulesCheck.py:1609 #: appPlugins/ToolRulesCheck.py:1634 appPlugins/ToolRulesCheck.py:1672 #: appPlugins/ToolRulesCheck.py:1709 appPlugins/ToolRulesCheck.py:1734 #: appPlugins/ToolTransform.py:614 appPlugins/ToolTransform.py:979 msgid "Value" msgstr "" #: appEditors/AppGerberEditor.py:6827 appEditors/geo_plugins/GeoTransformationPlugin.py:649 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:60 appPlugins/ToolTransform.py:616 msgid "A point of reference in format X,Y." msgstr "" #: appEditors/AppGerberEditor.py:6836 appEditors/geo_plugins/GeoTransformationPlugin.py:658 #: appPlugins/ToolTransform.py:625 msgid "Add point coordinates from clipboard." msgstr "" #: appEditors/AppGerberEditor.py:6851 appEditors/geo_plugins/GeoTransformationPlugin.py:685 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:104 appPlugins/ToolTransform.py:678 msgid "" "Angle, in degrees.\n" "Float number between -360 and 359.\n" "Positive numbers for CW motion.\n" "Negative numbers for CCW motion." msgstr "" #: appEditors/AppGerberEditor.py:6867 appEditors/geo_plugins/GeoTransformationPlugin.py:701 #: appPlugins/ToolTransform.py:694 msgid "" "Rotate the selected object(s).\n" "The point of reference is the middle of\n" "the bounding box for all selected objects." msgstr "" #: appEditors/AppGerberEditor.py:6887 appEditors/AppGerberEditor.py:6949 #: appEditors/geo_plugins/GeoTransformationPlugin.py:724 #: appEditors/geo_plugins/GeoTransformationPlugin.py:794 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:125 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:177 appPlugins/ToolTransform.py:717 #: appPlugins/ToolTransform.py:787 msgid "Link" msgstr "" #: appEditors/AppGerberEditor.py:6889 appEditors/AppGerberEditor.py:6951 #: appEditors/geo_plugins/GeoTransformationPlugin.py:726 #: appEditors/geo_plugins/GeoTransformationPlugin.py:796 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:127 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:179 appPlugins/ToolTransform.py:719 #: appPlugins/ToolTransform.py:789 msgid "Link the Y entry to X entry and copy its content." msgstr "" #: appEditors/AppGerberEditor.py:6894 appEditors/geo_plugins/GeoTransformationPlugin.py:737 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:143 appPlugins/ToolTransform.py:730 msgid "X angle" msgstr "" #: appEditors/AppGerberEditor.py:6896 appEditors/AppGerberEditor.py:6917 #: appEditors/geo_plugins/GeoTransformationPlugin.py:739 #: appEditors/geo_plugins/GeoTransformationPlugin.py:760 appPlugins/ToolTransform.py:732 #: appPlugins/ToolTransform.py:753 msgid "" "Angle for Skew action, in degrees.\n" "Float number between -360 and 360." msgstr "" #: appEditors/AppGerberEditor.py:6904 appEditors/geo_plugins/GeoTransformationPlugin.py:747 #: appPlugins/ToolTransform.py:740 msgid "Skew X" msgstr "" #: appEditors/AppGerberEditor.py:6906 appEditors/AppGerberEditor.py:6927 #: appEditors/geo_plugins/GeoTransformationPlugin.py:749 #: appEditors/geo_plugins/GeoTransformationPlugin.py:770 appPlugins/ToolTransform.py:742 #: appPlugins/ToolTransform.py:763 msgid "" "Skew/shear the selected object(s).\n" "The point of reference is the middle of\n" "the bounding box for all selected objects." msgstr "" #: appEditors/AppGerberEditor.py:6915 appEditors/geo_plugins/GeoTransformationPlugin.py:758 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:157 appPlugins/ToolTransform.py:751 msgid "Y angle" msgstr "" #: appEditors/AppGerberEditor.py:6925 appEditors/geo_plugins/GeoTransformationPlugin.py:768 #: appPlugins/ToolTransform.py:761 msgid "Skew Y" msgstr "" #: appEditors/AppGerberEditor.py:6956 appEditors/geo_plugins/GeoTransformationPlugin.py:806 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:194 appPlugins/ToolTransform.py:799 msgid "X factor" msgstr "" #: appEditors/AppGerberEditor.py:6958 appEditors/geo_plugins/GeoTransformationPlugin.py:808 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:196 appPlugins/ToolTransform.py:801 msgid "Factor for scaling on X axis." msgstr "" #: appEditors/AppGerberEditor.py:6965 appEditors/geo_plugins/GeoTransformationPlugin.py:815 #: appPlugins/ToolTransform.py:808 msgid "Scale X" msgstr "" #: appEditors/AppGerberEditor.py:6967 appEditors/AppGerberEditor.py:6987 #: appEditors/geo_plugins/GeoTransformationPlugin.py:817 #: appEditors/geo_plugins/GeoTransformationPlugin.py:837 appPlugins/ToolTransform.py:810 #: appPlugins/ToolTransform.py:830 msgid "" "Scale the selected object(s).\n" "The point of reference depends on \n" "the Scale reference checkbox state." msgstr "" #: appEditors/AppGerberEditor.py:6976 appEditors/geo_plugins/GeoTransformationPlugin.py:826 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:207 appPlugins/ToolTransform.py:819 msgid "Y factor" msgstr "" #: appEditors/AppGerberEditor.py:6978 appEditors/geo_plugins/GeoTransformationPlugin.py:828 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:209 appPlugins/ToolTransform.py:821 msgid "Factor for scaling on Y axis." msgstr "" #: appEditors/AppGerberEditor.py:6985 appEditors/geo_plugins/GeoTransformationPlugin.py:835 #: appPlugins/ToolTransform.py:828 msgid "Scale Y" msgstr "" #: appEditors/AppGerberEditor.py:7012 appEditors/geo_plugins/GeoTransformationPlugin.py:865 #: appPlugins/ToolTransform.py:858 msgid "Flip on X" msgstr "" #: appEditors/AppGerberEditor.py:7014 appEditors/AppGerberEditor.py:7019 #: appEditors/geo_plugins/GeoTransformationPlugin.py:867 #: appEditors/geo_plugins/GeoTransformationPlugin.py:872 appPlugins/ToolTransform.py:860 #: appPlugins/ToolTransform.py:865 msgid "Flip the selected object(s) over the X axis." msgstr "" #: appEditors/AppGerberEditor.py:7017 appEditors/geo_plugins/GeoTransformationPlugin.py:870 #: appPlugins/ToolTransform.py:863 msgid "Flip on Y" msgstr "" #: appEditors/AppGerberEditor.py:7037 appEditors/geo_plugins/GeoTransformationPlugin.py:893 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:69 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:128 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:231 appPlugins/ToolFilm.py:1362 #: appPlugins/ToolFilm.py:1433 appPlugins/ToolTransform.py:886 msgid "X val" msgstr "" #: appEditors/AppGerberEditor.py:7039 appEditors/geo_plugins/GeoTransformationPlugin.py:895 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:233 appPlugins/ToolTransform.py:888 msgid "Distance to offset on X axis. In current units." msgstr "" #: appEditors/AppGerberEditor.py:7046 appEditors/geo_plugins/GeoTransformationPlugin.py:902 #: appPlugins/ToolTransform.py:895 msgid "Offset X" msgstr "" #: appEditors/AppGerberEditor.py:7048 appEditors/AppGerberEditor.py:7068 #: appEditors/geo_plugins/GeoTransformationPlugin.py:904 #: appEditors/geo_plugins/GeoTransformationPlugin.py:924 appPlugins/ToolTransform.py:897 #: appPlugins/ToolTransform.py:917 msgid "" "Offset the selected object(s).\n" "The point of reference is the middle of\n" "the bounding box for all selected objects.\n" msgstr "" #: appEditors/AppGerberEditor.py:7057 appEditors/geo_plugins/GeoTransformationPlugin.py:913 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:79 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:137 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:244 appPlugins/ToolFilm.py:1372 #: appPlugins/ToolFilm.py:1443 appPlugins/ToolTransform.py:906 msgid "Y val" msgstr "" #: appEditors/AppGerberEditor.py:7059 appEditors/geo_plugins/GeoTransformationPlugin.py:915 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:246 appPlugins/ToolTransform.py:908 msgid "Distance to offset on Y axis. In current units." msgstr "" #: appEditors/AppGerberEditor.py:7066 appEditors/geo_plugins/GeoTransformationPlugin.py:922 #: appPlugins/ToolTransform.py:915 msgid "Offset Y" msgstr "" #: appEditors/AppGerberEditor.py:7086 appEditors/geo_plugins/GeoTransformationPlugin.py:944 #: appGUI/ObjectUI.py:495 appGUI/ObjectUI.py:537 #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:76 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:139 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:209 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:263 appPlugins/ToolFilm.py:1532 #: appPlugins/ToolInvertGerber.py:271 appPlugins/ToolQRCode.py:893 #: appPlugins/ToolTransform.py:938 msgid "Rounded" msgstr "" #: appEditors/AppGerberEditor.py:7088 appEditors/geo_plugins/GeoTransformationPlugin.py:946 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:265 appPlugins/ToolTransform.py:940 msgid "" "If checked then the buffer will surround the buffered shape,\n" "every corner will be rounded.\n" "If not checked then the buffer will follow the exact geometry\n" "of the buffered shape." msgstr "" #: appEditors/AppGerberEditor.py:7096 appEditors/geo_plugins/GeoTransformationPlugin.py:960 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:279 appPlugins/ToolDistance.py:181 #: appPlugins/ToolDistance.py:817 appPlugins/ToolTransform.py:954 msgid "Distance" msgstr "" #: appEditors/AppGerberEditor.py:7098 appEditors/geo_plugins/GeoTransformationPlugin.py:962 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:281 appPlugins/ToolTransform.py:956 msgid "" "A positive value will create the effect of dilation,\n" "while a negative value will create the effect of erosion.\n" "Each geometry element of the object will be increased\n" "or decreased with the 'distance'." msgstr "" #: appEditors/AppGerberEditor.py:7110 appEditors/geo_plugins/GeoTransformationPlugin.py:974 #: appPlugins/ToolTransform.py:968 msgid "Buffer D" msgstr "" #: appEditors/AppGerberEditor.py:7112 appEditors/geo_plugins/GeoTransformationPlugin.py:976 #: appPlugins/ToolTransform.py:970 msgid "" "Create the buffer effect on each geometry,\n" "element from the selected object, using the distance." msgstr "" #: appEditors/AppGerberEditor.py:7123 appEditors/geo_plugins/GeoTransformationPlugin.py:987 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:298 appPlugins/ToolTransform.py:981 msgid "" "A positive value will create the effect of dilation,\n" "while a negative value will create the effect of erosion.\n" "Each geometry element of the object will be increased\n" "or decreased to fit the 'Value'. Value is a percentage\n" "of the initial dimension." msgstr "" #: appEditors/AppGerberEditor.py:7136 appEditors/geo_plugins/GeoTransformationPlugin.py:1000 #: appPlugins/ToolTransform.py:994 msgid "Buffer F" msgstr "" #: appEditors/AppGerberEditor.py:7138 appEditors/geo_plugins/GeoTransformationPlugin.py:1002 #: appPlugins/ToolTransform.py:996 msgid "" "Create the buffer effect on each geometry,\n" "element from the selected object, using the factor." msgstr "" #: appEditors/AppGerberEditor.py:7198 appEditors/AppGerberEditor.py:7207 #: appEditors/exc_plugins/ExcCopyPlugin.py:54 appEditors/exc_plugins/ExcCopyPlugin.py:63 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:49 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:58 #: appEditors/exc_plugins/ExcDrillPlugin.py:54 appEditors/exc_plugins/ExcDrillPlugin.py:63 #: appEditors/exc_plugins/ExcResizePlugin.py:54 appEditors/exc_plugins/ExcResizePlugin.py:63 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:51 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:60 #: appEditors/exc_plugins/ExcSlotPlugin.py:54 appEditors/exc_plugins/ExcSlotPlugin.py:63 #: appEditors/geo_plugins/GeoBufferPlugin.py:48 appEditors/geo_plugins/GeoBufferPlugin.py:57 #: appEditors/geo_plugins/GeoCirclePlugin.py:57 appEditors/geo_plugins/GeoCopyPlugin.py:54 #: appEditors/geo_plugins/GeoCopyPlugin.py:63 appEditors/geo_plugins/GeoPaintPlugin.py:44 #: appEditors/geo_plugins/GeoPaintPlugin.py:53 appEditors/geo_plugins/GeoPathPlugin.py:54 #: appEditors/geo_plugins/GeoPathPlugin.py:63 #: appEditors/geo_plugins/GeoRectanglePlugin.py:57 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:51 #: appEditors/geo_plugins/GeoSimplificationPlugin.py:60 #: appEditors/geo_plugins/GeoTextPlugin.py:51 appEditors/geo_plugins/GeoTextPlugin.py:60 #: appEditors/geo_plugins/GeoTransformationPlugin.py:63 #: appEditors/geo_plugins/GeoTransformationPlugin.py:72 appPlugins/ToolAlignObjects.py:85 #: appPlugins/ToolAlignObjects.py:94 appPlugins/ToolCalculators.py:48 #: appPlugins/ToolCalculators.py:57 appPlugins/ToolCopperThieving.py:91 #: appPlugins/ToolCopperThieving.py:100 appPlugins/ToolCutOut.py:134 #: appPlugins/ToolCutOut.py:143 appPlugins/ToolDblSided.py:59 appPlugins/ToolDblSided.py:68 #: appPlugins/ToolDistance.py:102 appPlugins/ToolDistance.py:111 #: appPlugins/ToolDistance.py:168 appPlugins/ToolDistance.py:177 #: appPlugins/ToolDrilling.py:133 appPlugins/ToolDrilling.py:142 #: appPlugins/ToolEtchCompensation.py:54 appPlugins/ToolEtchCompensation.py:63 #: appPlugins/ToolExtract.py:90 appPlugins/ToolExtract.py:99 appPlugins/ToolFiducials.py:92 #: appPlugins/ToolFiducials.py:101 appPlugins/ToolFilm.py:105 appPlugins/ToolFilm.py:114 #: appPlugins/ToolFollow.py:78 appPlugins/ToolFollow.py:87 appPlugins/ToolImage.py:55 #: appPlugins/ToolImage.py:64 appPlugins/ToolInvertGerber.py:54 #: appPlugins/ToolInvertGerber.py:63 appPlugins/ToolIsolation.py:146 #: appPlugins/ToolIsolation.py:155 appPlugins/ToolLevelling.py:131 #: appPlugins/ToolLevelling.py:140 appPlugins/ToolMarkers.py:106 #: appPlugins/ToolMarkers.py:115 appPlugins/ToolMilling.py:171 appPlugins/ToolMilling.py:180 #: appPlugins/ToolNCC.py:147 appPlugins/ToolNCC.py:156 appPlugins/ToolObjectDistance.py:63 #: appPlugins/ToolObjectDistance.py:72 appPlugins/ToolOptimal.py:66 #: appPlugins/ToolOptimal.py:75 appPlugins/ToolPaint.py:154 appPlugins/ToolPaint.py:163 #: appPlugins/ToolPanelize.py:60 appPlugins/ToolPanelize.py:69 #: appPlugins/ToolPcbWizard.py:66 appPlugins/ToolPcbWizard.py:75 #: appPlugins/ToolPunchGerber.py:115 appPlugins/ToolPunchGerber.py:124 #: appPlugins/ToolQRCode.py:75 appPlugins/ToolQRCode.py:84 appPlugins/ToolReport.py:78 #: appPlugins/ToolReport.py:87 appPlugins/ToolRulesCheck.py:69 #: appPlugins/ToolRulesCheck.py:78 appPlugins/ToolSolderPaste.py:73 #: appPlugins/ToolSolderPaste.py:82 appPlugins/ToolSub.py:115 appPlugins/ToolSub.py:124 #: appPlugins/ToolTransform.py:45 appPlugins/ToolTransform.py:54 msgid "Plugin" msgstr "" #: appEditors/AppGerberEditor.py:7233 appEditors/geo_plugins/GeoTransformationPlugin.py:102 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:68 appPlugins/ToolDrilling.py:2915 #: appPlugins/ToolMilling.py:4975 appPlugins/ToolPanelize.py:1221 #: appPlugins/ToolTransform.py:608 msgid "Object" msgstr "" #: appEditors/AppGerberEditor.py:7309 appEditors/geo_plugins/GeoTransformationPlugin.py:163 #: appPlugins/ToolTransform.py:175 msgid "Incorrect format for Point value. Needs format X,Y" msgstr "" #: appEditors/AppGerberEditor.py:7334 appEditors/geo_plugins/GeoTransformationPlugin.py:188 #: appPlugins/ToolTransform.py:192 msgid "Rotate transformation can not be done for a value of 0." msgstr "" #: appEditors/AppGerberEditor.py:7392 appEditors/AppGerberEditor.py:7413 #: appEditors/geo_plugins/GeoTransformationPlugin.py:243 #: appEditors/geo_plugins/GeoTransformationPlugin.py:261 appPlugins/ToolTransform.py:250 #: appPlugins/ToolTransform.py:271 msgid "Scale transformation can not be done for a factor of 0 or 1." msgstr "" #: appEditors/AppGerberEditor.py:7426 appEditors/AppGerberEditor.py:7435 #: appEditors/geo_plugins/GeoTransformationPlugin.py:274 #: appEditors/geo_plugins/GeoTransformationPlugin.py:283 appPlugins/ToolTransform.py:284 #: appPlugins/ToolTransform.py:293 msgid "Offset transformation can not be done for a value of 0." msgstr "" #: appEditors/AppGerberEditor.py:7472 msgid "Appying Rotate" msgstr "" #: appEditors/AppGerberEditor.py:7486 appEditors/AppGerberEditor.py:7528 #: appEditors/AppGerberEditor.py:7568 appEditors/AppGerberEditor.py:7607 #: appEditors/AppGerberEditor.py:7651 appEditors/AppGerberEditor.py:7687 #: appEditors/geo_plugins/GeoTransformationPlugin.py:328 #: appEditors/geo_plugins/GeoTransformationPlugin.py:361 #: appEditors/geo_plugins/GeoTransformationPlugin.py:395 #: appEditors/geo_plugins/GeoTransformationPlugin.py:429 #: appEditors/geo_plugins/GeoTransformationPlugin.py:462 #: appEditors/geo_plugins/GeoTransformationPlugin.py:483 appMain.py:7010 appMain.py:7056 #: appPlugins/ToolTransform.py:343 appPlugins/ToolTransform.py:383 #: appPlugins/ToolTransform.py:422 appPlugins/ToolTransform.py:457 #: appPlugins/ToolTransform.py:494 appPlugins/ToolTransform.py:529 msgid "Action was not executed" msgstr "" #: appEditors/AppGerberEditor.py:7505 msgid "Applying Flip" msgstr "" #: appEditors/AppGerberEditor.py:7517 appEditors/geo_plugins/GeoTransformationPlugin.py:354 #: appMain.py:7008 appPlugins/ToolTransform.py:370 msgid "Flip on Y axis done" msgstr "" #: appEditors/AppGerberEditor.py:7525 appEditors/geo_plugins/GeoTransformationPlugin.py:357 #: appMain.py:7054 appPlugins/ToolTransform.py:379 msgid "Flip on X axis done" msgstr "" #: appEditors/AppGerberEditor.py:7548 msgid "Applying Skew" msgstr "" #: appEditors/AppGerberEditor.py:7564 appEditors/geo_plugins/GeoTransformationPlugin.py:390 msgid "Skew on the X axis done" msgstr "" #: appEditors/AppGerberEditor.py:7566 appEditors/geo_plugins/GeoTransformationPlugin.py:392 msgid "Skew on the Y axis done" msgstr "" #: appEditors/AppGerberEditor.py:7589 msgid "Applying Scale" msgstr "" #: appEditors/AppGerberEditor.py:7602 appEditors/geo_plugins/GeoTransformationPlugin.py:425 msgid "Scale on the X axis done" msgstr "" #: appEditors/AppGerberEditor.py:7604 appEditors/geo_plugins/GeoTransformationPlugin.py:427 msgid "Scale on the Y axis done" msgstr "" #: appEditors/AppGerberEditor.py:7625 msgid "Applying Offset" msgstr "" #: appEditors/AppGerberEditor.py:7646 appEditors/AppGerberEditor.py:7719 #: appEditors/geo_plugins/GeoTransformationPlugin.py:457 #: appEditors/geo_plugins/GeoTransformationPlugin.py:515 appPlugins/ToolMarkers.py:1366 msgid "Offset on the X axis." msgstr "" #: appEditors/AppGerberEditor.py:7648 appEditors/geo_plugins/GeoTransformationPlugin.py:459 #: appPlugins/ToolMarkers.py:1379 msgid "Offset on the Y axis." msgstr "" #: appEditors/AppGerberEditor.py:7661 msgid "Applying Buffer" msgstr "" #: appEditors/AppGerberEditor.py:7683 appEditors/geo_plugins/GeoTransformationPlugin.py:479 #: appPlugins/ToolTransform.py:525 msgid "Buffer done" msgstr "" #: appEditors/AppGerberEditor.py:7691 appEditors/geo_plugins/GeoTransformationPlugin.py:487 msgid "Rotate ..." msgstr "" #: appEditors/AppGerberEditor.py:7692 appEditors/AppGerberEditor.py:7744 #: appEditors/AppGerberEditor.py:7760 appEditors/geo_plugins/GeoTransformationPlugin.py:488 #: appEditors/geo_plugins/GeoTransformationPlugin.py:540 #: appEditors/geo_plugins/GeoTransformationPlugin.py:556 msgid "Enter an Angle Value (degrees)" msgstr "" #: appEditors/AppGerberEditor.py:7701 appEditors/geo_plugins/GeoTransformationPlugin.py:497 #: appPlugins/ToolTransform.py:341 msgid "Rotate done" msgstr "" #: appEditors/AppGerberEditor.py:7704 appEditors/geo_plugins/GeoTransformationPlugin.py:500 msgid "Rotate cancelled" msgstr "" #: appEditors/AppGerberEditor.py:7709 appEditors/geo_plugins/GeoTransformationPlugin.py:505 msgid "Offset on X axis ..." msgstr "" #: appEditors/AppGerberEditor.py:7710 appEditors/AppGerberEditor.py:7728 #: appEditors/geo_plugins/GeoTransformationPlugin.py:506 #: appEditors/geo_plugins/GeoTransformationPlugin.py:524 msgid "Enter a distance Value" msgstr "" #: appEditors/AppGerberEditor.py:7722 appEditors/geo_plugins/GeoTransformationPlugin.py:518 msgid "Offset X cancelled" msgstr "" #: appEditors/AppGerberEditor.py:7727 appEditors/geo_plugins/GeoTransformationPlugin.py:523 msgid "Offset on Y axis ..." msgstr "" #: appEditors/AppGerberEditor.py:7737 appEditors/geo_plugins/GeoTransformationPlugin.py:533 msgid "Offset on Y axis done" msgstr "" #: appEditors/AppGerberEditor.py:7740 msgid "Offset Y cancelled" msgstr "" #: appEditors/AppGerberEditor.py:7743 appEditors/geo_plugins/GeoTransformationPlugin.py:539 msgid "Skew on X axis ..." msgstr "" #: appEditors/AppGerberEditor.py:7753 appEditors/geo_plugins/GeoTransformationPlugin.py:549 msgid "Skew on X axis done" msgstr "" #: appEditors/AppGerberEditor.py:7756 msgid "Skew X cancelled" msgstr "" #: appEditors/AppGerberEditor.py:7759 appEditors/geo_plugins/GeoTransformationPlugin.py:555 msgid "Skew on Y axis ..." msgstr "" #: appEditors/AppGerberEditor.py:7769 appEditors/geo_plugins/GeoTransformationPlugin.py:565 msgid "Skew on Y axis done" msgstr "" #: appEditors/AppGerberEditor.py:7772 msgid "Skew Y cancelled" msgstr "" #: appEditors/AppTextEditor.py:90 appEditors/AppTextEditor.py:361 appGUI/GUIElements.py:4576 msgid "Find" msgstr "" #: appEditors/AppTextEditor.py:92 msgid "Will search and highlight in yellow the string in the Find box." msgstr "" #: appEditors/AppTextEditor.py:97 appEditors/AppTextEditor.py:98 msgid "Find box. Enter here the strings to be searched in the text." msgstr "" #: appEditors/AppTextEditor.py:102 msgid "Replace With" msgstr "" #: appEditors/AppTextEditor.py:104 msgid "Will replace the string from the Find box with the one in the Replace box." msgstr "" #: appEditors/AppTextEditor.py:109 appEditors/AppTextEditor.py:110 msgid "String to replace the one in the Find box throughout the text." msgstr "" #: appEditors/AppTextEditor.py:114 appEditors/appGCodeEditor.py:160 #: appGUI/GUIElements.py:5492 appGUI/ObjectUI.py:1220 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:59 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:323 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279 appPlugins/ToolExtract.py:1049 #: appPlugins/ToolFollow.py:727 appPlugins/ToolIsolation.py:3887 #: appPlugins/ToolPaint.py:3288 appPlugins/ToolPunchGerber.py:2062 msgid "All" msgstr "" #: appEditors/AppTextEditor.py:115 msgid "" "When checked it will replace all instances in the 'Find' box\n" "with the text in the 'Replace' box.." msgstr "" #: appEditors/AppTextEditor.py:128 msgid "Save changes internally." msgstr "" #: appEditors/AppTextEditor.py:135 msgid "Open a OS standard Preview Print window." msgstr "" #: appEditors/AppTextEditor.py:141 msgid "Open a OS standard Print window." msgstr "" #: appEditors/AppTextEditor.py:147 msgid "Will open a text file in the editor." msgstr "" #: appEditors/AppTextEditor.py:153 msgid "Will save the text in the editor into a file." msgstr "" #: appEditors/AppTextEditor.py:157 msgid "Run" msgstr "" #: appEditors/AppTextEditor.py:158 msgid "Will run the TCL commands found in the text file, one by one." msgstr "" #: appEditors/AppTextEditor.py:241 appEditors/appGCodeEditor.py:707 msgid "Open file" msgstr "" #: appEditors/AppTextEditor.py:272 appEditors/AppTextEditor.py:278 appMain.py:8166 #: appMain.py:8172 appObjects/CNCJobObject.py:715 appObjects/CNCJobObject.py:721 #: appPlugins/ToolLevelling.py:1466 appPlugins/ToolLevelling.py:1472 #: appPlugins/ToolLevelling.py:1658 appPlugins/ToolLevelling.py:1664 #: appPlugins/ToolSolderPaste.py:1180 msgid "Export Code ..." msgstr "" #: appEditors/AppTextEditor.py:333 appObjects/CNCJobObject.py:758 #: appObjects/CNCJobObject.py:1180 appPlugins/ToolLevelling.py:1490 #: appPlugins/ToolLevelling.py:1682 appPlugins/ToolSolderPaste.py:1208 msgid "No such file or directory" msgstr "" #: appEditors/AppTextEditor.py:345 appObjects/CNCJobObject.py:1194 #: appPlugins/ToolSolderPaste.py:1219 msgid "Saved to" msgstr "" #: appEditors/AppTextEditor.py:359 msgid "End of document." msgstr "" #: appEditors/AppTextEditor.py:360 msgid "Start from beginning?" msgstr "" #: appEditors/AppTextEditor.py:367 appGUI/GUIElements.py:2771 appGUI/GUIElements.py:2841 #: appGUI/GUIElements.py:2902 appGUI/GUIElements.py:2967 appGUI/GUIElements.py:4501 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:417 appMain.py:5013 appMain.py:5185 #: appMain.py:5276 appMain.py:9795 appMain.py:10149 appMain.py:12020 msgid "Ok" msgstr "" #: appEditors/appGCodeEditor.py:76 appGUI/GUIElements.py:4584 appGUI/MainGUI.py:211 #: appGUI/MainGUI.py:393 appGUI/MainGUI.py:4803 appGUI/MainGUI.py:5322 #: appGUI/MainGUI.py:5431 appGUI/MainGUI.py:5574 msgid "Ctrl+S" msgstr "" #: appEditors/appGCodeEditor.py:82 appMain.py:8330 msgid "Code Editor" msgstr "" #: appEditors/appGCodeEditor.py:166 msgid "Header" msgstr "" #: appEditors/appGCodeEditor.py:172 msgid "Start" msgstr "" #: appEditors/appGCodeEditor.py:266 msgid "All GCode" msgstr "" #: appEditors/appGCodeEditor.py:272 msgid "Header GCode" msgstr "" #: appEditors/appGCodeEditor.py:278 msgid "Start GCode" msgstr "" #: appEditors/appGCodeEditor.py:682 appObjects/CNCJobObject.py:831 msgid "Loaded Machine Code into Code Editor" msgstr "" #: appEditors/appGCodeEditor.py:774 appGUI/ObjectUI.py:1240 #: appPlugins/ToolSolderPaste.py:1112 msgid "GCode Editor" msgstr "" #: appEditors/appGCodeEditor.py:812 appEditors/appGCodeEditor.py:823 msgid "GCode" msgstr "" #: appEditors/appGCodeEditor.py:823 appGUI/ObjectUI.py:705 appGUI/ObjectUI.py:1398 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:587 appObjects/AppObjectTemplate.py:556 #: appPlugins/ToolDrilling.py:2443 appPlugins/ToolMilling.py:4032 #: appPlugins/ToolMilling.py:4292 appPlugins/ToolReport.py:181 msgid "Drills" msgstr "" #: appEditors/appGCodeEditor.py:823 appGUI/ObjectUI.py:705 appGUI/ObjectUI.py:1398 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:175 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:588 appObjects/AppObjectTemplate.py:558 #: appPlugins/ToolDrilling.py:2443 appPlugins/ToolMilling.py:4032 #: appPlugins/ToolMilling.py:4293 appPlugins/ToolReport.py:183 msgid "Slots" msgstr "" #: appEditors/appGCodeEditor.py:843 appEditors/appGCodeEditor.py:865 msgid "CNC Code Snippet" msgstr "" #: appEditors/appGCodeEditor.py:845 appEditors/appGCodeEditor.py:867 msgid "Code snippet defined in Preferences." msgstr "" #: appEditors/appGCodeEditor.py:851 appEditors/appGCodeEditor.py:873 msgid "" "Type here any G-Code commands you would\n" "like to insert at the cursor location." msgstr "" #: appEditors/appGCodeEditor.py:857 appEditors/appGCodeEditor.py:879 msgid "Insert Code" msgstr "" #: appEditors/appGCodeEditor.py:860 appEditors/appGCodeEditor.py:882 msgid "Insert the code above at the cursor location." msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:145 appEditors/exc_plugins/ExcDrillPlugin.py:179 #: appEditors/exc_plugins/ExcSlotPlugin.py:243 appEditors/geo_plugins/GeoCopyPlugin.py:143 #: appEditors/geo_plugins/GeoPathPlugin.py:124 msgid "Projection" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:147 appEditors/exc_plugins/ExcDrillPlugin.py:181 #: appEditors/exc_plugins/ExcSlotPlugin.py:245 appEditors/geo_plugins/GeoCopyPlugin.py:145 #: appEditors/geo_plugins/GeoPathPlugin.py:126 msgid "Length of the current segment/move." msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:162 appEditors/geo_plugins/GeoCopyPlugin.py:160 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:135 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:41 appPlugins/ToolImage.py:575 #: appPlugins/ToolLevelling.py:1890 appPlugins/ToolMarkers.py:1450 msgid "Mode" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:164 appEditors/geo_plugins/GeoCopyPlugin.py:162 msgid "Single copy or special (array of copies)" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:167 appEditors/geo_plugins/GeoCopyPlugin.py:165 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:116 appPlugins/ToolCutOut.py:2304 msgid "Single" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:168 appEditors/geo_plugins/GeoCopyPlugin.py:166 msgid "Array" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:188 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:192 #: appEditors/geo_plugins/GeoCopyPlugin.py:186 msgid "Specify how many items to be in the array." msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:199 #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:178 #: appEditors/geo_plugins/GeoCopyPlugin.py:197 msgid "" "Select the type of array to create.\n" "It can be Linear X(Y) or Circular" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:205 appEditors/geo_plugins/GeoCopyPlugin.py:203 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:99 msgid "2D" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:288 appEditors/geo_plugins/GeoCopyPlugin.py:286 msgid "Placement" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:290 appEditors/geo_plugins/GeoCopyPlugin.py:288 msgid "" "Placement of array items:\n" "'Spacing' - define space between rows and columns \n" "'Offset' - each row (and column) will be placed at a multiple of a value, from origin" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:307 appEditors/geo_plugins/GeoCopyPlugin.py:305 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:81 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:86 appPlugins/ToolLevelling.py:1936 #: appPlugins/ToolPanelize.py:1317 msgid "Rows" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:309 appEditors/geo_plugins/GeoCopyPlugin.py:307 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:88 appPlugins/ToolPanelize.py:1319 msgid "Number of rows" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:318 appEditors/geo_plugins/GeoCopyPlugin.py:316 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:71 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:74 appPlugins/ToolLevelling.py:1925 #: appPlugins/ToolPanelize.py:1306 msgid "Columns" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:320 appEditors/geo_plugins/GeoCopyPlugin.py:318 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:76 appPlugins/ToolPanelize.py:1308 msgid "Number of columns" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:341 appEditors/geo_plugins/GeoCopyPlugin.py:339 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:61 appPlugins/ToolPanelize.py:1294 msgid "Spacing rows" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:343 appEditors/geo_plugins/GeoCopyPlugin.py:341 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:63 appPlugins/ToolPanelize.py:1296 msgid "" "Spacing between rows.\n" "In current units." msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:354 appEditors/geo_plugins/GeoCopyPlugin.py:352 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:47 appPlugins/ToolPanelize.py:1281 msgid "Spacing cols" msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:356 appEditors/geo_plugins/GeoCopyPlugin.py:354 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:49 appPlugins/ToolPanelize.py:1283 msgid "" "Spacing between columns.\n" "In current units." msgstr "" #: appEditors/exc_plugins/ExcCopyPlugin.py:376 appEditors/exc_plugins/ExcCopyPlugin.py:389 #: appEditors/geo_plugins/GeoCopyPlugin.py:374 appEditors/geo_plugins/GeoCopyPlugin.py:387 msgid "" "'Offset' - each row (and column) will be placed at a multiple of a value, from origin" msgstr "" #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:135 #: appEditors/exc_plugins/ExcDrillPlugin.py:142 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:133 #: appEditors/exc_plugins/ExcSlotPlugin.py:142 appEditors/geo_plugins/GeoCirclePlugin.py:183 #: appEditors/geo_plugins/GeoRectanglePlugin.py:216 msgid "Position" msgstr "" #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:301 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:364 #: appEditors/geo_plugins/GeoCirclePlugin.py:212 #: appEditors/geo_plugins/GeoRectanglePlugin.py:284 appPlugins/ToolImage.py:892 msgid "Radius" msgstr "" #: appEditors/exc_plugins/ExcDrillArrayPlugin.py:302 #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:365 msgid "Array radius." msgstr "" #: appEditors/exc_plugins/ExcResizePlugin.py:145 msgid "Diameter to resize to." msgstr "" #: appEditors/exc_plugins/ExcResizePlugin.py:160 msgid "Resize a drill or a selection of drills." msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:163 #: appEditors/exc_plugins/ExcSlotPlugin.py:172 msgid "" "Parameters for adding a slot (hole with oval shape)\n" "either single or as an part of an array." msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:179 #: appEditors/exc_plugins/ExcSlotPlugin.py:188 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:187 msgid "Length. The length of the slot." msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:193 #: appEditors/exc_plugins/ExcSlotPlugin.py:202 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:203 msgid "" "Direction on which the slot is oriented:\n" "- 'X' - horizontal axis \n" "- 'Y' - vertical axis or \n" "- 'Angle' - a custom angle for the slot inclination" msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:209 #: appEditors/exc_plugins/ExcSlotPlugin.py:218 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:219 msgid "" "Angle at which the slot is placed.\n" "The precision is of max 2 decimals.\n" "Min value is: -360.00 degrees.\n" "Max value is: 360.00 degrees." msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:227 msgid "Array parameters." msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:243 msgid "" "Select the type of slot array to create.\n" "It can be Linear X(Y) or Circular" msgstr "" #: appEditors/exc_plugins/ExcSlotArrayPlugin.py:256 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:250 msgid "Specify how many slots to be in the array." msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:131 #: appEditors/geo_plugins/GeoBufferPlugin.py:277 msgid "" "Negative buffer value is not accepted. Use Buffer interior to generate an 'inside' shape" msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:145 #: appEditors/geo_plugins/GeoBufferPlugin.py:222 #: appEditors/geo_plugins/GeoBufferPlugin.py:290 msgid "Invalid distance." msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:190 #: appEditors/geo_plugins/GeoBufferPlugin.py:256 #: appEditors/geo_plugins/GeoBufferPlugin.py:324 msgid "Failed, the result is empty." msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:211 msgid "Negative buffer value is not accepted." msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:387 msgid "" "There are 3 types of corners:\n" " - 'Round': the corner is rounded for exterior buffer.\n" " - 'Square': the corner is met in a sharp angle for exterior buffer.\n" " - 'Beveled': the corner is a line that directly connects the features meeting in the " "corner" msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:403 msgid "Buffer Interior" msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:405 msgid "Buffer Exterior" msgstr "" #: appEditors/geo_plugins/GeoBufferPlugin.py:411 msgid "Full Buffer" msgstr "" #: appEditors/geo_plugins/GeoCirclePlugin.py:131 #: appEditors/geo_plugins/GeoRectanglePlugin.py:164 #: appEditors/geo_plugins/GeoTextPlugin.py:285 appGUI/MainGUI.py:1717 msgid "Apply" msgstr "" #: appEditors/geo_plugins/GeoCirclePlugin.py:266 #: appEditors/geo_plugins/GeoRectanglePlugin.py:324 msgid "Note" msgstr "" #: appEditors/geo_plugins/GeoCirclePlugin.py:268 #: appEditors/geo_plugins/GeoRectanglePlugin.py:326 msgid "Shift + click to select a shape for modification." msgstr "" #: appEditors/geo_plugins/GeoPaintPlugin.py:59 msgid "Paint Tool" msgstr "" #: appEditors/geo_plugins/GeoPaintPlugin.py:126 #, python-format msgid "Could not do Paint. Overlap value has to be less than 100%%." msgstr "" #: appEditors/geo_plugins/GeoPaintPlugin.py:139 msgid "Invalid value for" msgstr "" #: appEditors/geo_plugins/GeoPaintPlugin.py:201 appPlugins/ToolMilling.py:3303 #: appPlugins/ToolPaint.py:1984 appPlugins/ToolPaint.py:2195 msgid "" "Could not do Paint. Try a different combination of parameters. Or a different method of " "Paint" msgstr "" #: appEditors/geo_plugins/GeoPaintPlugin.py:247 msgid "Diameter of the tool to be used in the operation." msgstr "" #: appEditors/geo_plugins/GeoPaintPlugin.py:293 msgid "" "Algorithm to paint the polygons:\n" "- Standard: Fixed step inwards.\n" "- Seed-based: Outwards from seed.\n" "- Line-based: Parallel lines." msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:228 msgid "Anchor" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:230 appMain.py:5806 msgid "T Left" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:231 appMain.py:5807 msgid "T Right" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:232 appMain.py:5808 msgid "B Left" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:233 appMain.py:5809 msgid "B Right" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:234 appGUI/ObjectUI.py:1693 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:154 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:101 appMain.py:5576 appMain.py:5810 #: appPlugins/ToolFilm.py:1389 appPlugins/ToolFilm.py:1460 appPlugins/ToolMarkers.py:1357 msgid "Center" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:256 msgid "Corner" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:270 msgid "" "There are 3 types of corners:\n" " - 'Round': the corners are rounded\n" " - 'Square': the corners meet in a sharp angle\n" " - 'Beveled': the corners are a line that directly connects the features meeting in the " "corner" msgstr "" #: appEditors/geo_plugins/GeoRectanglePlugin.py:310 appObjects/AppObjectTemplate.py:947 #: appPlugins/ToolReport.py:599 msgid "Width" msgstr "" #: appEditors/geo_plugins/GeoTextPlugin.py:66 msgid "Text Tool" msgstr "" #: appEditors/geo_plugins/GeoTextPlugin.py:195 appEditors/geo_plugins/GeoTextPlugin.py:266 #: appGUI/MainGUI.py:1846 msgid "Text" msgstr "" #: appEditors/geo_plugins/GeoTextPlugin.py:230 appGUI/ObjectUI.py:1597 msgid "Font" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:313 appPlugins/ToolTransform.py:321 msgid "Rotating" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:346 appPlugins/ToolTransform.py:353 msgid "Flipping" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:381 appPlugins/ToolTransform.py:398 msgid "Skewing" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:416 appPlugins/ToolTransform.py:432 msgid "Scaling" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:447 appPlugins/ToolTransform.py:467 msgid "Offsetting" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:472 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:56 appObjects/GerberObject.py:423 #: appPlugins/ToolCopperThieving.py:608 appPlugins/ToolCopperThieving.py:803 #: appPlugins/ToolCopperThieving.py:816 appPlugins/ToolIsolation.py:1602 #: appPlugins/ToolNCC.py:1989 appPlugins/ToolNCC.py:2016 appPlugins/ToolNCC.py:2124 #: appPlugins/ToolNCC.py:2137 appPlugins/ToolNCC.py:3038 appPlugins/ToolNCC.py:3143 #: appPlugins/ToolNCC.py:3158 appPlugins/ToolNCC.py:3426 appPlugins/ToolNCC.py:3527 #: appPlugins/ToolNCC.py:3542 appPlugins/ToolTransform.py:504 camlib.py:1166 msgid "Buffering" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:536 msgid "Offset on the Y axis canceled" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:552 msgid "Skew on X axis canceled" msgstr "" #: appEditors/geo_plugins/GeoTransformationPlugin.py:568 msgid "Skew on Y axis canceled" msgstr "" #: appGUI/GUIElements.py:427 appGUI/GUIElements.py:1206 appGUI/GUIElements.py:1450 msgid "Read Only" msgstr "" #: appGUI/GUIElements.py:432 appGUI/GUIElements.py:1211 appGUI/GUIElements.py:1455 #: appGUI/GUIElements.py:1896 appGUI/GUIElements.py:2190 appGUI/GUIElements.py:4542 msgid "Undo" msgstr "" #: appGUI/GUIElements.py:432 appGUI/GUIElements.py:1211 appGUI/GUIElements.py:1455 #: appGUI/GUIElements.py:1896 appGUI/GUIElements.py:2190 appGUI/GUIElements.py:4542 msgid "Ctrl+Z" msgstr "" #: appGUI/GUIElements.py:439 appGUI/GUIElements.py:1218 appGUI/GUIElements.py:1462 #: appGUI/GUIElements.py:1903 appGUI/GUIElements.py:2195 appGUI/GUIElements.py:4547 msgid "Redo" msgstr "" #: appGUI/GUIElements.py:439 appGUI/GUIElements.py:1218 appGUI/GUIElements.py:1462 #: appGUI/GUIElements.py:1903 appGUI/GUIElements.py:2195 appGUI/GUIElements.py:4547 msgid "Ctrl+Y" msgstr "" #: appGUI/GUIElements.py:448 appGUI/GUIElements.py:1227 appGUI/GUIElements.py:1471 #: appGUI/GUIElements.py:1912 appGUI/GUIElements.py:2202 appGUI/GUIElements.py:4554 #: appGUI/MainGUI.py:1866 appGUI/ObjectUI.py:1222 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:61 msgid "Cut" msgstr "" #: appGUI/GUIElements.py:448 appGUI/GUIElements.py:1227 appGUI/GUIElements.py:1471 #: appGUI/GUIElements.py:1912 appGUI/GUIElements.py:2202 appGUI/GUIElements.py:4554 #: appGUI/MainGUI.py:5323 msgid "Ctrl+X" msgstr "" #: appGUI/GUIElements.py:455 appGUI/GUIElements.py:1234 appGUI/GUIElements.py:1478 #: appGUI/GUIElements.py:1919 appGUI/GUIElements.py:2207 appGUI/GUIElements.py:4559 #: appGUI/MainGUI.py:464 appGUI/MainGUI.py:4795 msgid "Ctrl+C" msgstr "" #: appGUI/GUIElements.py:462 appGUI/GUIElements.py:1241 appGUI/GUIElements.py:1485 #: appGUI/GUIElements.py:1926 appGUI/GUIElements.py:2212 msgid "Paste" msgstr "" #: appGUI/GUIElements.py:462 appGUI/GUIElements.py:1241 appGUI/GUIElements.py:1485 #: appGUI/GUIElements.py:1926 appGUI/GUIElements.py:2212 msgid "Ctrl+V" msgstr "" #: appGUI/GUIElements.py:469 appGUI/GUIElements.py:1248 appGUI/GUIElements.py:1492 #: appGUI/GUIElements.py:1931 appGUI/GUIElements.py:2217 appGUI/GUIElements.py:4564 #: appGUI/MainGUI.py:5121 appGUI/MainGUI.py:5122 appGUI/MainGUI.py:5327 #: appGUI/MainGUI.py:5427 appGUI/MainGUI.py:5428 appGUI/MainGUI.py:5568 #: appGUI/MainGUI.py:5569 msgid "Del" msgstr "" #: appGUI/GUIElements.py:478 appGUI/GUIElements.py:1257 appGUI/GUIElements.py:1501 #: appGUI/GUIElements.py:1938 appGUI/GUIElements.py:2224 appGUI/GUIElements.py:4571 #: appGUI/MainGUI.py:501 appGUI/MainGUI.py:636 appGUI/MainGUI.py:4794 #: appObjects/ObjectCollection.py:1200 appObjects/ObjectCollection.py:1247 #: appPlugins/ToolIsolation.py:3927 appPlugins/ToolPunchGerber.py:2340 #: appPlugins/ToolRulesCheck.py:1178 msgid "Select All" msgstr "" #: appGUI/GUIElements.py:478 appGUI/GUIElements.py:1257 appGUI/GUIElements.py:1501 #: appGUI/GUIElements.py:1938 appGUI/GUIElements.py:2224 appGUI/GUIElements.py:4571 #: appGUI/MainGUI.py:501 appGUI/MainGUI.py:4794 msgid "Ctrl+A" msgstr "" #: appGUI/GUIElements.py:1264 appGUI/GUIElements.py:1508 msgid "Step Up" msgstr "" #: appGUI/GUIElements.py:1271 appGUI/GUIElements.py:1515 msgid "Step Down" msgstr "" #: appGUI/GUIElements.py:4464 msgid "" "The reference can be:\n" "- Absolute -> the reference point is point (0,0)\n" "- Relative -> the reference point is the mouse position before Jump" msgstr "" #: appGUI/GUIElements.py:4469 msgid "Abs" msgstr "" #: appGUI/GUIElements.py:4470 msgid "Relative" msgstr "" #: appGUI/GUIElements.py:4481 msgid "Location" msgstr "" #: appGUI/GUIElements.py:4483 msgid "" "The Location value is a tuple (x,y).\n" "If the reference is Absolute then the Jump will be at the position (x,y).\n" "If the reference is Relative then the Jump will be at the (x,y) distance\n" "from the current position (in some cases, last mouse click position).\n" "WARNING: comma is a separator between values." msgstr "" #: appGUI/GUIElements.py:4576 msgid "Ctrl+F" msgstr "" #: appGUI/GUIElements.py:4584 msgid "Save Log" msgstr "" #: appGUI/GUIElements.py:4590 msgid "Clear All" msgstr "" #: appGUI/GUIElements.py:4590 msgid "Shift+Del" msgstr "" #: appGUI/GUIElements.py:4709 appPlugins/ToolShell.py:326 msgid "Type >help< to get started" msgstr "" #: appGUI/GUIElements.py:5389 appGUI/GUIElements.py:5406 msgid "Jog the Y axis." msgstr "" #: appGUI/GUIElements.py:5397 appGUI/MainGUI.py:482 appGUI/MainGUI.py:1105 #: appGUI/MainGUI.py:2501 msgid "Move to Origin" msgstr "" #: appGUI/GUIElements.py:5414 appGUI/GUIElements.py:5422 msgid "Jog the X axis." msgstr "" #: appGUI/GUIElements.py:5432 appGUI/GUIElements.py:5442 msgid "Jog the Z axis." msgstr "" #: appGUI/GUIElements.py:5466 msgid "Zero the CNC X axes at current position." msgstr "" #: appGUI/GUIElements.py:5474 msgid "Zero the CNC Y axes at current position." msgstr "" #: appGUI/GUIElements.py:5479 msgid "Z" msgstr "" #: appGUI/GUIElements.py:5482 msgid "Zero the CNC Z axes at current position." msgstr "" #: appGUI/GUIElements.py:5486 msgid "Do Home" msgstr "" #: appGUI/GUIElements.py:5488 msgid "Perform a homing cycle on all axis." msgstr "" #: appGUI/GUIElements.py:5497 msgid "Zero all CNC axes at current position." msgstr "" #: appGUI/GUIElements.py:5656 appGUI/GUIElements.py:5665 msgid "Idle." msgstr "" #: appGUI/GUIElements.py:5708 msgid "Application started ..." msgstr "" #: appGUI/GUIElements.py:5709 msgid "Hello!" msgstr "" #: appGUI/GUIElements.py:5819 msgid "Run Script ..." msgstr "" #: appGUI/GUIElements.py:5821 appGUI/MainGUI.py:246 msgid "" "Will run the opened Tcl Script thus\n" "enabling the automation of certain\n" "functions of FlatCAM." msgstr "" #: appGUI/GUIElements.py:5829 msgid "Toggle GUI ..." msgstr "" #: appGUI/GUIElements.py:5831 msgid "Will show/hide the GUI." msgstr "" #: appGUI/GUIElements.py:5838 appGUI/MainGUI.py:168 appPlugins/ToolPcbWizard.py:409 #: appPlugins/ToolPcbWizard.py:417 msgid "Open" msgstr "" #: appGUI/GUIElements.py:5842 appGUI/MainGUI.py:173 appGUI/MainGUI.py:1068 #: appGUI/MainGUI.py:2464 appGUI/MainGUI.py:4801 appMain.py:9694 appMain.py:9697 msgid "Open Project" msgstr "" #: appGUI/GUIElements.py:5848 appGUI/MainGUI.py:180 appGUI/MainGUI.py:1063 #: appGUI/MainGUI.py:2459 appMain.py:9577 appMain.py:9582 msgid "Open Gerber" msgstr "" #: appGUI/GUIElements.py:5848 appGUI/MainGUI.py:180 appGUI/MainGUI.py:4798 msgid "Ctrl+G" msgstr "" #: appGUI/GUIElements.py:5853 appGUI/MainGUI.py:185 appGUI/MainGUI.py:1065 #: appGUI/MainGUI.py:2461 appMain.py:9616 appMain.py:9621 msgid "Open Excellon" msgstr "" #: appGUI/GUIElements.py:5853 appGUI/MainGUI.py:185 appGUI/MainGUI.py:862 #: appGUI/MainGUI.py:4797 appGUI/MainGUI.py:5573 msgid "Ctrl+E" msgstr "" #: appGUI/GUIElements.py:5858 appGUI/MainGUI.py:190 appMain.py:9658 appMain.py:9663 msgid "Open G-Code" msgstr "" #: appGUI/GUIElements.py:5868 appGUI/MainGUI.py:377 msgid "Exit" msgstr "" #: appGUI/MainGUI.py:117 appGUI/MainGUI.py:119 appGUI/MainGUI.py:1755 msgid "Toggle Panel" msgstr "" #: appGUI/MainGUI.py:129 msgid "File" msgstr "" #: appGUI/MainGUI.py:134 appGUI/MainGUI.py:4800 msgid "New Project" msgstr "" #: appGUI/MainGUI.py:134 appGUI/MainGUI.py:4800 msgid "Ctrl+N" msgstr "" #: appGUI/MainGUI.py:136 msgid "Will create a new, blank project" msgstr "" #: appGUI/MainGUI.py:141 appGUI/MainGUI.py:1766 appPlugins/ToolLevelling.py:2066 msgid "New" msgstr "" #: appGUI/MainGUI.py:145 appGUI/MainGUI.py:1612 appGUI/MainGUI.py:1768 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:76 #: appObjects/ObjectCollection.py:266 appPlugins/ToolCopperThieving.py:195 #: appPlugins/ToolCopperThieving.py:1373 appPlugins/ToolCopperThieving.py:1384 #: appPlugins/ToolCutOut.py:2313 appPlugins/ToolCutOut.py:2729 #: appPlugins/ToolDblSided.py:734 appPlugins/ToolDblSided.py:943 appPlugins/ToolFilm.py:1277 #: appPlugins/ToolFilm.py:1300 appPlugins/ToolImage.py:221 appPlugins/ToolImage.py:251 #: appPlugins/ToolImage.py:543 appPlugins/ToolIsolation.py:3847 #: appPlugins/ToolIsolation.py:3898 appPlugins/ToolMarkers.py:1563 #: appPlugins/ToolMilling.py:2751 appPlugins/ToolMilling.py:2916 #: appPlugins/ToolMilling.py:3970 appPlugins/ToolNCC.py:4082 appPlugins/ToolNCC.py:4546 #: appPlugins/ToolPaint.py:3302 appPlugins/ToolPanelize.py:134 #: appPlugins/ToolPanelize.py:242 appPlugins/ToolPanelize.py:1176 #: appPlugins/ToolPanelize.py:1227 appPlugins/ToolSolderPaste.py:1644 #: appPlugins/ToolSub.py:882 appPlugins/ToolTransform.py:151 appPlugins/ToolTransform.py:638 msgid "Geometry" msgstr "" #: appGUI/MainGUI.py:145 appGUI/MainGUI.py:720 appGUI/MainGUI.py:839 appGUI/MainGUI.py:4725 #: appGUI/MainGUI.py:5306 appGUI/MainGUI.py:5562 msgid "N" msgstr "" #: appGUI/MainGUI.py:147 msgid "Will create a new, empty Geometry Object." msgstr "" #: appGUI/MainGUI.py:150 appGUI/MainGUI.py:1590 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:94 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:74 #: appObjects/ObjectCollection.py:264 appPlugins/ToolAlignObjects.py:428 #: appPlugins/ToolAlignObjects.py:467 appPlugins/ToolCopperThieving.py:195 #: appPlugins/ToolCopperThieving.py:1373 appPlugins/ToolCopperThieving.py:1384 #: appPlugins/ToolCutOut.py:2312 appPlugins/ToolDblSided.py:734 #: appPlugins/ToolDblSided.py:941 appPlugins/ToolFilm.py:1276 appPlugins/ToolFilm.py:1299 #: appPlugins/ToolImage.py:253 appPlugins/ToolImage.py:543 appPlugins/ToolIsolation.py:3848 #: appPlugins/ToolIsolation.py:3898 appPlugins/ToolMarkers.py:1562 #: appPlugins/ToolNCC.py:4083 appPlugins/ToolNCC.py:4546 appPlugins/ToolPaint.py:3302 #: appPlugins/ToolPanelize.py:128 appPlugins/ToolPanelize.py:242 #: appPlugins/ToolPanelize.py:1176 appPlugins/ToolPanelize.py:1227 #: appPlugins/ToolPanelize.py:1338 appPlugins/ToolRulesCheck.py:1188 #: appPlugins/ToolSub.py:823 appPlugins/ToolTransform.py:151 appPlugins/ToolTransform.py:636 #: defaults.py:632 msgid "Gerber" msgstr "" #: appGUI/MainGUI.py:150 appGUI/MainGUI.py:763 appGUI/MainGUI.py:853 appGUI/MainGUI.py:4719 #: appGUI/MainGUI.py:5297 appGUI/MainGUI.py:5556 msgid "B" msgstr "" #: appGUI/MainGUI.py:152 msgid "Will create a new, empty Gerber Object." msgstr "" #: appGUI/MainGUI.py:155 appGUI/MainGUI.py:1601 appGUI/MainGUI.py:1772 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:98 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:75 #: appObjects/ObjectCollection.py:265 appPlugins/ToolAlignObjects.py:429 #: appPlugins/ToolAlignObjects.py:468 appPlugins/ToolCopperThieving.py:195 #: appPlugins/ToolCopperThieving.py:1373 appPlugins/ToolCopperThieving.py:1384 #: appPlugins/ToolDblSided.py:734 appPlugins/ToolDblSided.py:942 #: appPlugins/ToolDblSided.py:970 appPlugins/ToolFilm.py:1615 #: appPlugins/ToolIsolation.py:3898 appPlugins/ToolMilling.py:3971 #: appPlugins/ToolNCC.py:4546 appPlugins/ToolPaint.py:3302 appPlugins/ToolPanelize.py:131 #: appPlugins/ToolPanelize.py:242 appPlugins/ToolPanelize.py:1176 #: appPlugins/ToolPunchGerber.py:2155 appPlugins/ToolPunchGerber.py:2169 #: appPlugins/ToolRulesCheck.py:1195 appPlugins/ToolRulesCheck.py:1393 #: appPlugins/ToolTransform.py:151 appPlugins/ToolTransform.py:637 msgid "Excellon" msgstr "" #: appGUI/MainGUI.py:155 appGUI/MainGUI.py:4723 msgid "L" msgstr "" #: appGUI/MainGUI.py:157 msgid "Will create a new, empty Excellon Object." msgstr "" #: appGUI/MainGUI.py:162 appObjects/ObjectCollection.py:269 msgid "Document" msgstr "" #: appGUI/MainGUI.py:162 appGUI/MainGUI.py:794 appGUI/MainGUI.py:850 appGUI/MainGUI.py:5299 #: appGUI/MainGUI.py:5419 appGUI/MainGUI.py:5558 msgid "D" msgstr "" #: appGUI/MainGUI.py:164 msgid "Will create a new, empty Document Object." msgstr "" #: appGUI/MainGUI.py:173 appGUI/MainGUI.py:4801 msgid "Ctrl+O" msgstr "" #: appGUI/MainGUI.py:197 msgid "Open Config" msgstr "" #: appGUI/MainGUI.py:202 msgid "Recent projects" msgstr "" #: appGUI/MainGUI.py:204 msgid "Recent files" msgstr "" #: appGUI/MainGUI.py:207 appGUI/MainGUI.py:955 appGUI/MainGUI.py:1725 #: appGUI/ObjectUI.py:1443 appObjects/ObjectCollection.py:413 msgid "Save" msgstr "" #: appGUI/MainGUI.py:211 appGUI/MainGUI.py:2466 appGUI/MainGUI.py:4803 msgid "Save Project" msgstr "" #: appGUI/MainGUI.py:217 appGUI/MainGUI.py:5064 msgid "Save Project As" msgstr "" #: appGUI/MainGUI.py:217 appGUI/MainGUI.py:5064 msgid "Ctrl+Shift+S" msgstr "" #: appGUI/MainGUI.py:232 msgid "Scripting" msgstr "" #: appGUI/MainGUI.py:236 appGUI/MainGUI.py:1136 appGUI/MainGUI.py:2530 msgid "New Script" msgstr "" #: appGUI/MainGUI.py:238 appGUI/MainGUI.py:1138 appGUI/MainGUI.py:2532 msgid "Open Script" msgstr "" #: appGUI/MainGUI.py:241 msgid "Open Example" msgstr "" #: appGUI/MainGUI.py:244 appGUI/MainGUI.py:1140 appGUI/MainGUI.py:2534 msgid "Run Script" msgstr "" #: appGUI/MainGUI.py:244 appGUI/MainGUI.py:4879 msgid "Shift+S" msgstr "" #: appGUI/MainGUI.py:261 msgid "Import" msgstr "" #: appGUI/MainGUI.py:264 msgid "SVG as Geometry Object" msgstr "" #: appGUI/MainGUI.py:268 msgid "SVG as Gerber Object" msgstr "" #: appGUI/MainGUI.py:274 msgid "DXF as Geometry Object" msgstr "" #: appGUI/MainGUI.py:278 msgid "DXF as Gerber Object" msgstr "" #: appGUI/MainGUI.py:283 msgid "HPGL2 as Geometry Object" msgstr "" #: appGUI/MainGUI.py:289 appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:19 #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:19 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:20 appPlugins/ToolFilm.py:1650 msgid "Export" msgstr "" #: appGUI/MainGUI.py:294 appMain.py:9805 appMain.py:9810 appPlugins/ToolQRCode.py:642 #: appPlugins/ToolQRCode.py:647 msgid "Export SVG" msgstr "" #: appGUI/MainGUI.py:299 appMain.py:10159 appMain.py:10164 msgid "Export DXF" msgstr "" #: appGUI/MainGUI.py:306 appPlugins/ToolQRCode.py:593 appPlugins/ToolQRCode.py:598 msgid "Export PNG" msgstr "" #: appGUI/MainGUI.py:308 msgid "" "Will export an image in PNG format,\n" "the saved image will contain the visual \n" "information currently in FlatCAM Plot Area." msgstr "" #: appGUI/MainGUI.py:318 appMain.py:10056 appMain.py:10061 msgid "Export Excellon" msgstr "" #: appGUI/MainGUI.py:320 msgid "" "Will export an Excellon Object as Excellon file,\n" "the coordinates format, the file units and zeros\n" "are set in Preferences -> Excellon Export." msgstr "" #: appGUI/MainGUI.py:328 appMain.py:10101 appMain.py:10106 msgid "Export Gerber" msgstr "" #: appGUI/MainGUI.py:330 msgid "" "Will export an Gerber Object as Gerber file,\n" "the coordinates format, the file units and zeros\n" "are set in Preferences -> Gerber Export." msgstr "" #: appGUI/MainGUI.py:340 msgid "Backup" msgstr "" #: appGUI/MainGUI.py:345 msgid "Import Preferences from file" msgstr "" #: appGUI/MainGUI.py:352 msgid "Export Preferences to file" msgstr "" #: appGUI/MainGUI.py:361 appGUI/preferences/PreferencesUIManager.py:1383 msgid "Save Preferences" msgstr "" #: appGUI/MainGUI.py:368 appGUI/MainGUI.py:4802 msgid "Print (PDF)" msgstr "" #: appGUI/MainGUI.py:368 appGUI/MainGUI.py:4802 msgid "Ctrl+P" msgstr "" #: appGUI/MainGUI.py:385 appGUI/MainGUI.py:949 appGUI/MainGUI.py:1927 msgid "Edit" msgstr "" #: appGUI/MainGUI.py:390 msgid "Edit Object" msgstr "" #: appGUI/MainGUI.py:390 appGUI/MainGUI.py:735 appGUI/MainGUI.py:847 appGUI/MainGUI.py:4720 #: appGUI/MainGUI.py:5300 appGUI/MainGUI.py:5559 msgid "E" msgstr "" #: appGUI/MainGUI.py:403 msgid "Conversion" msgstr "" #: appGUI/MainGUI.py:407 msgid "Convert Single to MultiGeo" msgstr "" #: appGUI/MainGUI.py:409 msgid "" "Will convert a Geometry object from single_geometry type\n" "to a multi_geometry type." msgstr "" #: appGUI/MainGUI.py:414 msgid "Convert Multi to SingleGeo" msgstr "" #: appGUI/MainGUI.py:416 msgid "" "Will convert a Geometry object from multi_geometry type\n" "to a single_geometry type." msgstr "" #: appGUI/MainGUI.py:423 msgid "Convert Any to Geo" msgstr "" #: appGUI/MainGUI.py:426 msgid "Convert Any to Gerber" msgstr "" #: appGUI/MainGUI.py:429 msgid "Convert Any to Excellon" msgstr "" #: appGUI/MainGUI.py:434 msgid "Join Objects" msgstr "" #: appGUI/MainGUI.py:437 msgid "Join Geo/Gerber/Exc -> Geo" msgstr "" #: appGUI/MainGUI.py:439 msgid "" "Merge a selection of objects, which can be of type:\n" "- Gerber\n" "- Excellon\n" "- Geometry\n" "into a new combo Geometry object." msgstr "" #: appGUI/MainGUI.py:447 msgid "Join Excellon(s) -> Excellon" msgstr "" #: appGUI/MainGUI.py:449 msgid "Merge a selection of Excellon objects into a new combo Excellon object." msgstr "" #: appGUI/MainGUI.py:453 msgid "Join Gerber(s) -> Gerber" msgstr "" #: appGUI/MainGUI.py:455 msgid "Merge a selection of Gerber objects into a new combo Gerber object." msgstr "" #: appGUI/MainGUI.py:470 appGUI/MainGUI.py:755 appGUI/MainGUI.py:814 appGUI/MainGUI.py:873 msgid "DEL" msgstr "" #: appGUI/MainGUI.py:476 appGUI/MainGUI.py:1934 msgid "Num Move" msgstr "" #: appGUI/MainGUI.py:479 appGUI/MainGUI.py:1103 appGUI/MainGUI.py:2499 #: appGUI/MainGUI.py:4726 msgid "Set Origin" msgstr "" #: appGUI/MainGUI.py:479 appGUI/MainGUI.py:708 appGUI/MainGUI.py:4726 appGUI/MainGUI.py:5307 msgid "O" msgstr "" #: appGUI/MainGUI.py:482 msgid "Shift+O" msgstr "" #: appGUI/MainGUI.py:485 appGUI/MainGUI.py:1107 appGUI/MainGUI.py:2503 appMain.py:5578 #: appMain.py:5592 msgid "Custom Origin" msgstr "" #: appGUI/MainGUI.py:489 appGUI/MainGUI.py:1110 appGUI/MainGUI.py:2506 msgid "Jump to Location" msgstr "" #: appGUI/MainGUI.py:489 appGUI/MainGUI.py:4722 appGUI/MainGUI.py:5302 #: appGUI/MainGUI.py:5420 appGUI/MainGUI.py:5560 msgid "J" msgstr "" #: appGUI/MainGUI.py:492 appGUI/MainGUI.py:1112 appGUI/MainGUI.py:2508 #: appGUI/MainGUI.py:4875 msgid "Locate in Object" msgstr "" #: appGUI/MainGUI.py:492 appGUI/MainGUI.py:4875 msgid "Shift+J" msgstr "" #: appGUI/MainGUI.py:498 appMain.py:5003 msgid "Toggle Units" msgstr "" #: appGUI/MainGUI.py:498 appGUI/MainGUI.py:799 appGUI/MainGUI.py:4727 appGUI/MainGUI.py:5422 msgid "Q" msgstr "" #: appGUI/MainGUI.py:507 appGUI/MainGUI.py:1407 #: appGUI/preferences/PreferencesUIManager.py:1111 #: appGUI/preferences/PreferencesUIManager.py:1222 #: appGUI/preferences/PreferencesUIManager.py:1333 #: appGUI/preferences/PreferencesUIManager.py:1421 appMain.py:6549 appMain.py:6554 #: appMain.py:6574 msgid "Preferences" msgstr "" #: appGUI/MainGUI.py:507 appGUI/MainGUI.py:4877 msgid "Shift+P" msgstr "" #: appGUI/MainGUI.py:513 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:21 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:20 #: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:21 #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:23 appObjects/AppObjectTemplate.py:545 #: appPlugins/ToolImage.py:694 appPlugins/ToolReport.py:170 msgid "Options" msgstr "" #: appGUI/MainGUI.py:516 msgid "Rotate Selection" msgstr "" #: appGUI/MainGUI.py:516 msgid "Shift+(R)" msgstr "" #: appGUI/MainGUI.py:522 appGUI/MainGUI.py:4881 msgid "Skew on X axis" msgstr "" #: appGUI/MainGUI.py:522 appGUI/MainGUI.py:4881 appGUI/MainGUI.py:5316 msgid "Shift+X" msgstr "" #: appGUI/MainGUI.py:525 appGUI/MainGUI.py:4882 msgid "Skew on Y axis" msgstr "" #: appGUI/MainGUI.py:525 appGUI/MainGUI.py:4882 appGUI/MainGUI.py:5317 msgid "Shift+Y" msgstr "" #: appGUI/MainGUI.py:531 msgid "Flip on X axis" msgstr "" #: appGUI/MainGUI.py:534 msgid "Flip on Y axis" msgstr "" #: appGUI/MainGUI.py:540 msgid "View source" msgstr "" #: appGUI/MainGUI.py:540 appGUI/MainGUI.py:5026 msgid "Alt+S" msgstr "" #: appGUI/MainGUI.py:543 appGUI/MainGUI.py:4796 msgid "Ctrl+D" msgstr "" #: appGUI/MainGUI.py:549 msgid "Experimental" msgstr "" #: appGUI/MainGUI.py:553 appMain.py:6732 msgid "3D Area" msgstr "" #: appGUI/MainGUI.py:560 appGUI/MainGUI.py:1751 msgid "View" msgstr "" #: appGUI/MainGUI.py:563 appGUI/MainGUI.py:5031 msgid "Enable all" msgstr "" #: appGUI/MainGUI.py:563 appGUI/MainGUI.py:5031 msgid "Alt+1" msgstr "" #: appGUI/MainGUI.py:566 appGUI/MainGUI.py:5032 msgid "Disable all" msgstr "" #: appGUI/MainGUI.py:566 appGUI/MainGUI.py:5032 msgid "Alt+2" msgstr "" #: appGUI/MainGUI.py:569 msgid "Enable non-selected" msgstr "" #: appGUI/MainGUI.py:569 appGUI/MainGUI.py:5033 msgid "Alt+3" msgstr "" #: appGUI/MainGUI.py:572 msgid "Disable non-selected" msgstr "" #: appGUI/MainGUI.py:572 appGUI/MainGUI.py:5034 msgid "Alt+4" msgstr "" #: appGUI/MainGUI.py:578 appGUI/MainGUI.py:1126 appGUI/MainGUI.py:1758 #: appGUI/MainGUI.py:2522 appGUI/MainGUI.py:4732 msgid "Zoom Fit" msgstr "" #: appGUI/MainGUI.py:578 appGUI/MainGUI.py:4732 msgid "V" msgstr "" #: appGUI/MainGUI.py:581 appGUI/MainGUI.py:1122 appGUI/MainGUI.py:2518 #: appGUI/MainGUI.py:4736 msgid "Zoom In" msgstr "" #: appGUI/MainGUI.py:581 appGUI/MainGUI.py:4736 msgid "=" msgstr "" #: appGUI/MainGUI.py:584 appGUI/MainGUI.py:1124 appGUI/MainGUI.py:2520 #: appGUI/MainGUI.py:4735 msgid "Zoom Out" msgstr "" #: appGUI/MainGUI.py:584 appGUI/MainGUI.py:4735 msgid "-" msgstr "" #: appGUI/MainGUI.py:590 msgid "Redraw All" msgstr "" #: appGUI/MainGUI.py:590 appGUI/MainGUI.py:5120 msgid "F5" msgstr "" #: appGUI/MainGUI.py:595 appGUI/MainGUI.py:4872 msgid "Toggle Code Editor" msgstr "" #: appGUI/MainGUI.py:595 appGUI/MainGUI.py:4872 msgid "Shift+E" msgstr "" #: appGUI/MainGUI.py:599 msgid "Toggle FullScreen" msgstr "" #: appGUI/MainGUI.py:599 appGUI/MainGUI.py:5035 msgid "Alt+F10" msgstr "" #: appGUI/MainGUI.py:602 appGUI/MainGUI.py:4804 msgid "Toggle Plot Area" msgstr "" #: appGUI/MainGUI.py:602 appGUI/MainGUI.py:4804 msgid "Ctrl+F10" msgstr "" #: appGUI/MainGUI.py:605 msgid "Toggle Project/Properties/Tool" msgstr "" #: appGUI/MainGUI.py:605 appGUI/MainGUI.py:5123 msgid "`" msgstr "" #: appGUI/MainGUI.py:610 msgid "Toggle Grid Snap" msgstr "" #: appGUI/MainGUI.py:610 appGUI/MainGUI.py:4721 msgid "G" msgstr "" #: appGUI/MainGUI.py:613 appGUI/MainGUI.py:4873 msgid "Toggle Grid Lines" msgstr "" #: appGUI/MainGUI.py:613 appGUI/MainGUI.py:4873 msgid "Shift+G" msgstr "" #: appGUI/MainGUI.py:616 msgid "Toggle Axis" msgstr "" #: appGUI/MainGUI.py:616 appGUI/MainGUI.py:4870 msgid "Shift+A" msgstr "" #: appGUI/MainGUI.py:619 msgid "Toggle Workspace" msgstr "" #: appGUI/MainGUI.py:619 appGUI/MainGUI.py:4880 msgid "Shift+W" msgstr "" #: appGUI/MainGUI.py:622 appGUI/MainGUI.py:4874 msgid "Toggle HUD" msgstr "" #: appGUI/MainGUI.py:622 appGUI/MainGUI.py:4874 msgid "Shift+H" msgstr "" #: appGUI/MainGUI.py:627 msgid "Error Log" msgstr "" #: appGUI/MainGUI.py:632 msgid "Objects" msgstr "" #: appGUI/MainGUI.py:639 appObjects/ObjectCollection.py:1204 #: appObjects/ObjectCollection.py:1251 appPlugins/ToolIsolation.py:3933 #: appPlugins/ToolPunchGerber.py:2346 msgid "Deselect All" msgstr "" #: appGUI/MainGUI.py:644 appGUI/ObjectUI.py:362 appGUI/ObjectUI.py:744 #: appGUI/ObjectUI.py:1028 appGUI/ObjectUI.py:1418 msgid "Plugins" msgstr "" #: appGUI/MainGUI.py:648 appGUI/MainGUI.py:1134 appGUI/MainGUI.py:2528 msgid "Command Line" msgstr "" #: appGUI/MainGUI.py:648 appGUI/MainGUI.py:738 appGUI/MainGUI.py:856 appGUI/MainGUI.py:4730 #: appGUI/MainGUI.py:5310 appGUI/MainGUI.py:5565 msgid "S" msgstr "" #: appGUI/MainGUI.py:653 msgid "Help" msgstr "" #: appGUI/MainGUI.py:656 msgid "Online Help" msgstr "" #: appGUI/MainGUI.py:656 appGUI/MainGUI.py:5117 msgid "F1" msgstr "" #: appGUI/MainGUI.py:663 appMain.py:3977 appMain.py:3986 msgid "Bookmarks Manager" msgstr "" #: appGUI/MainGUI.py:668 msgid "Report a bug" msgstr "" #: appGUI/MainGUI.py:672 msgid "Excellon Specification" msgstr "" #: appGUI/MainGUI.py:675 msgid "Gerber Specification" msgstr "" #: appGUI/MainGUI.py:681 msgid "Shortcuts List" msgstr "" #: appGUI/MainGUI.py:681 appGUI/MainGUI.py:4715 msgid "F3" msgstr "" #: appGUI/MainGUI.py:684 msgid "YouTube Channel" msgstr "" #: appGUI/MainGUI.py:684 appGUI/MainGUI.py:5119 msgid "F4" msgstr "" #: appGUI/MainGUI.py:690 msgid "Donate" msgstr "" #: appGUI/MainGUI.py:694 appMain.py:3754 msgid "How To" msgstr "" #: appGUI/MainGUI.py:698 appMain.py:3225 msgid "About" msgstr "" #: appGUI/MainGUI.py:703 appGUI/MainGUI.py:1831 msgid "Geo Editor" msgstr "" #: appGUI/MainGUI.py:708 appGUI/MainGUI.py:1254 appGUI/MainGUI.py:2648 msgid "Add Circle" msgstr "" #: appGUI/MainGUI.py:712 appGUI/MainGUI.py:1256 appGUI/MainGUI.py:2650 msgid "Add Arc" msgstr "" #: appGUI/MainGUI.py:712 appGUI/MainGUI.py:791 appGUI/MainGUI.py:833 appGUI/MainGUI.py:5296 #: appGUI/MainGUI.py:5417 appGUI/MainGUI.py:5555 msgid "A" msgstr "" #: appGUI/MainGUI.py:716 appGUI/MainGUI.py:1258 appGUI/MainGUI.py:2652 msgid "Add Rectangle" msgstr "" #: appGUI/MainGUI.py:716 appGUI/MainGUI.py:807 appGUI/MainGUI.py:4729 appGUI/MainGUI.py:5309 #: appGUI/MainGUI.py:5423 appGUI/MainGUI.py:5564 msgid "R" msgstr "" #: appGUI/MainGUI.py:720 appGUI/MainGUI.py:1264 appGUI/MainGUI.py:2658 msgid "Add Polygon" msgstr "" #: appGUI/MainGUI.py:724 appGUI/MainGUI.py:1262 appGUI/MainGUI.py:2656 msgid "Add Path" msgstr "" #: appGUI/MainGUI.py:724 appGUI/MainGUI.py:830 appGUI/MainGUI.py:4728 appGUI/MainGUI.py:5308 #: appGUI/MainGUI.py:5563 appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:1399 msgid "P" msgstr "" #: appGUI/MainGUI.py:728 appGUI/MainGUI.py:1267 appGUI/MainGUI.py:2661 msgid "Add Text" msgstr "" #: appGUI/MainGUI.py:728 appGUI/MainGUI.py:836 appGUI/MainGUI.py:4731 appGUI/MainGUI.py:5311 #: appGUI/MainGUI.py:5424 appGUI/MainGUI.py:5566 appGUI/MainGUI.py:5567 msgid "T" msgstr "" #: appGUI/MainGUI.py:732 appGUI/MainGUI.py:1279 appGUI/MainGUI.py:2671 msgid "Polygon Union" msgstr "" #: appGUI/MainGUI.py:732 appGUI/MainGUI.py:5312 msgid "U" msgstr "" #: appGUI/MainGUI.py:735 appGUI/MainGUI.py:1284 appGUI/MainGUI.py:2676 msgid "Polygon Intersection" msgstr "" #: appGUI/MainGUI.py:738 appGUI/MainGUI.py:2678 msgid "Polygon Subtraction" msgstr "" #: appGUI/MainGUI.py:742 appGUI/MainGUI.py:1864 appGUI/MainGUI.py:2680 msgid "Alt Subtraction" msgstr "" #: appGUI/MainGUI.py:747 appGUI/MainGUI.py:1298 appGUI/MainGUI.py:2684 msgid "Cut Path" msgstr "" #: appGUI/MainGUI.py:752 msgid "Copy Geom" msgstr "" #: appGUI/MainGUI.py:752 appGUI/MainGUI.py:811 appGUI/MainGUI.py:870 appGUI/MainGUI.py:5298 #: appGUI/MainGUI.py:5418 appGUI/MainGUI.py:5557 msgid "C" msgstr "" #: appGUI/MainGUI.py:760 appGUI/MainGUI.py:820 appGUI/MainGUI.py:878 appGUI/MainGUI.py:4724 #: appGUI/MainGUI.py:5304 appGUI/MainGUI.py:5305 appGUI/MainGUI.py:5421 #: appGUI/MainGUI.py:5561 msgid "M" msgstr "" #: appGUI/MainGUI.py:771 appGUI/MainGUI.py:5301 msgid "I" msgstr "" #: appGUI/MainGUI.py:775 appGUI/MainGUI.py:865 appGUI/MainGUI.py:5025 appGUI/MainGUI.py:5318 #: appGUI/MainGUI.py:5577 msgid "Alt+R" msgstr "" #: appGUI/MainGUI.py:780 appGUI/MainGUI.py:5303 msgid "Toggle Corner Snap" msgstr "" #: appGUI/MainGUI.py:780 appGUI/MainGUI.py:5303 msgid "K" msgstr "" #: appGUI/MainGUI.py:791 appGUI/MainGUI.py:1230 appGUI/MainGUI.py:1912 #: appGUI/MainGUI.py:2624 appGUI/MainGUI.py:5417 msgid "Add Drill Array" msgstr "" #: appGUI/MainGUI.py:794 appGUI/MainGUI.py:1228 appGUI/MainGUI.py:1910 #: appGUI/MainGUI.py:2622 appGUI/MainGUI.py:5419 msgid "Add Drill" msgstr "" #: appGUI/MainGUI.py:799 appGUI/MainGUI.py:1234 appGUI/MainGUI.py:1917 #: appGUI/MainGUI.py:2630 appGUI/MainGUI.py:5422 msgid "Add Slot Array" msgstr "" #: appGUI/MainGUI.py:802 appGUI/MainGUI.py:1232 appGUI/MainGUI.py:1915 #: appGUI/MainGUI.py:2628 appGUI/MainGUI.py:5425 msgid "Add Slot" msgstr "" #: appGUI/MainGUI.py:802 appGUI/MainGUI.py:5425 msgid "W" msgstr "" #: appGUI/MainGUI.py:807 appGUI/MainGUI.py:1236 appGUI/MainGUI.py:1920 #: appGUI/MainGUI.py:2626 appGUI/MainGUI.py:5423 msgid "Resize Drill" msgstr "" #: appGUI/MainGUI.py:830 appGUI/MainGUI.py:1316 appGUI/MainGUI.py:2702 #: appGUI/MainGUI.py:5563 msgid "Add Pad" msgstr "" #: appGUI/MainGUI.py:836 appGUI/MainGUI.py:1320 appGUI/MainGUI.py:2706 #: appGUI/MainGUI.py:5566 msgid "Add Track" msgstr "" #: appGUI/MainGUI.py:839 appGUI/MainGUI.py:1322 appGUI/MainGUI.py:2708 #: appGUI/MainGUI.py:5562 msgid "Add Region" msgstr "" #: appGUI/MainGUI.py:844 appGUI/MainGUI.py:1324 appGUI/MainGUI.py:1887 #: appGUI/MainGUI.py:2710 msgid "Poligonize" msgstr "" #: appGUI/MainGUI.py:844 appGUI/MainGUI.py:5021 appGUI/MainGUI.py:5576 msgid "Alt+N" msgstr "" #: appGUI/MainGUI.py:847 appGUI/MainGUI.py:5559 msgid "Add SemiDisc" msgstr "" #: appGUI/MainGUI.py:850 appGUI/MainGUI.py:5558 msgid "Add Disc" msgstr "" #: appGUI/MainGUI.py:859 appGUI/MainGUI.py:1337 appGUI/MainGUI.py:1899 #: appGUI/MainGUI.py:2723 msgid "Mark Area" msgstr "" #: appGUI/MainGUI.py:859 appGUI/MainGUI.py:5008 appGUI/MainGUI.py:5575 msgid "Alt+A" msgstr "" #: appGUI/MainGUI.py:862 appGUI/MainGUI.py:1275 appGUI/MainGUI.py:1342 #: appGUI/MainGUI.py:1854 appGUI/MainGUI.py:1901 appGUI/MainGUI.py:2667 #: appGUI/MainGUI.py:2728 msgid "Eraser" msgstr "" #: appGUI/MainGUI.py:865 appMain.py:7079 appMain.py:7133 appMain.py:7181 msgid "Transform" msgstr "" #: appGUI/MainGUI.py:895 msgid "Enable Plot" msgstr "" #: appGUI/MainGUI.py:897 msgid "Disable Plot" msgstr "" #: appGUI/MainGUI.py:901 appGUI/MainGUI.py:1786 msgid "Set Color" msgstr "" #: appGUI/MainGUI.py:904 appGUI/MainGUI.py:1789 appMain.py:9125 msgid "Red" msgstr "" #: appGUI/MainGUI.py:907 appGUI/MainGUI.py:1792 appMain.py:9127 msgid "Blue" msgstr "" #: appGUI/MainGUI.py:910 appGUI/MainGUI.py:1795 appMain.py:9130 msgid "Yellow" msgstr "" #: appGUI/MainGUI.py:913 appGUI/MainGUI.py:1798 appMain.py:9132 msgid "Green" msgstr "" #: appGUI/MainGUI.py:916 appGUI/MainGUI.py:1801 appMain.py:9134 msgid "Purple" msgstr "" #: appGUI/MainGUI.py:919 appGUI/MainGUI.py:1804 appMain.py:9136 msgid "Brown" msgstr "" #: appGUI/MainGUI.py:922 appGUI/MainGUI.py:1807 appMain.py:9138 msgid "Indigo" msgstr "" #: appGUI/MainGUI.py:925 appGUI/MainGUI.py:1810 appMain.py:9140 appMain.py:9218 msgid "White" msgstr "" #: appGUI/MainGUI.py:928 appGUI/MainGUI.py:1813 appMain.py:9142 msgid "Black" msgstr "" #: appGUI/MainGUI.py:938 appGUI/MainGUI.py:1823 appMain.py:9183 msgid "Opacity" msgstr "" #: appGUI/MainGUI.py:941 appGUI/MainGUI.py:1826 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:45 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:48 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:65 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:67 appMain.py:9157 #: appPlugins/ToolDrilling.py:2467 appPlugins/ToolIsolation.py:3457 #: appPlugins/ToolMilling.py:4127 appPlugins/ToolNCC.py:4165 appPlugins/ToolPaint.py:3044 msgid "Default" msgstr "" #: appGUI/MainGUI.py:946 msgid "View Source" msgstr "" #: appGUI/MainGUI.py:959 appGUI/MainGUI.py:972 appGUI/MainGUI.py:1491 appGUI/MainGUI.py:1940 #: appMain.py:2693 appMain.py:2969 appMain.py:8618 msgid "Properties" msgstr "" #: appGUI/MainGUI.py:972 appGUI/MainGUI.py:1475 appGUI/MainGUI.py:1775 appMain.py:2699 #: appMain.py:2972 appMain.py:10599 msgid "Project" msgstr "" #: appGUI/MainGUI.py:989 msgid "File Toolbar" msgstr "" #: appGUI/MainGUI.py:994 msgid "Edit Toolbar" msgstr "" #: appGUI/MainGUI.py:999 msgid "View Toolbar" msgstr "" #: appGUI/MainGUI.py:1004 msgid "Shell Toolbar" msgstr "" #: appGUI/MainGUI.py:1009 msgid "Plugin Toolbar" msgstr "" #: appGUI/MainGUI.py:1014 msgid "Excellon Editor Toolbar" msgstr "" #: appGUI/MainGUI.py:1021 msgid "Geometry Editor Toolbar" msgstr "" #: appGUI/MainGUI.py:1026 msgid "Gerber Editor Toolbar" msgstr "" #: appGUI/MainGUI.py:1032 appGUI/MainGUI.py:2347 msgid "Delta Coordinates Toolbar" msgstr "" #: appGUI/MainGUI.py:1036 appGUI/MainGUI.py:2355 msgid "Coordinates Toolbar" msgstr "" #: appGUI/MainGUI.py:1040 appGUI/MainGUI.py:2363 msgid "Grid Toolbar" msgstr "" #: appGUI/MainGUI.py:1050 appGUI/MainGUI.py:2371 msgid "Status Toolbar" msgstr "" #: appGUI/MainGUI.py:1070 msgid "Save project" msgstr "" #: appGUI/MainGUI.py:1076 appGUI/MainGUI.py:2472 #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:21 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:18 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:20 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:21 appMain.py:2696 appMain.py:2967 msgid "Editor" msgstr "" #: appGUI/MainGUI.py:1099 appGUI/MainGUI.py:2495 appGUI/MainGUI.py:4799 #: appGUI/MainGUI.py:5321 msgid "Distance Tool" msgstr "" #: appGUI/MainGUI.py:1101 appGUI/MainGUI.py:2497 msgid "Distance Min Tool" msgstr "" #: appGUI/MainGUI.py:1118 appGUI/MainGUI.py:1762 appGUI/MainGUI.py:2514 msgid "Replot" msgstr "" #: appGUI/MainGUI.py:1120 appGUI/MainGUI.py:1760 appGUI/MainGUI.py:2516 msgid "Clear Plot" msgstr "" #: appGUI/MainGUI.py:1150 appGUI/MainGUI.py:2544 appGUI/ObjectUI.py:1422 #: appPlugins/ToolLevelling.py:167 appPlugins/ToolLevelling.py:1717 msgid "Levelling" msgstr "" #: appGUI/MainGUI.py:1159 appGUI/MainGUI.py:2553 appGUI/ObjectUI.py:237 #: appGUI/ObjectUI.py:426 appPlugins/ToolFollow.py:114 appPlugins/ToolFollow.py:650 msgid "Follow" msgstr "" #: appGUI/MainGUI.py:1170 appGUI/MainGUI.py:2564 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:117 appPlugins/ToolCutOut.py:2305 msgid "Panel" msgstr "" #: appGUI/MainGUI.py:1172 appGUI/MainGUI.py:2566 appGUI/ObjectUI.py:397 #: appPlugins/ToolFilm.py:142 appPlugins/ToolFilm.py:1222 msgid "Film" msgstr "" #: appGUI/MainGUI.py:1174 appGUI/MainGUI.py:2568 appPlugins/ToolDblSided.py:95 #: appPlugins/ToolDblSided.py:673 msgid "2-Sided" msgstr "" #: appGUI/MainGUI.py:1179 appGUI/MainGUI.py:2573 appGUI/MainGUI.py:5008 #: appPlugins/ToolAlignObjects.py:19 appPlugins/ToolAlignObjects.py:386 msgid "Align Objects" msgstr "" #: appGUI/MainGUI.py:1186 appGUI/MainGUI.py:2580 appGUI/MainGUI.py:5012 #: appPlugins/ToolExtract.py:38 appPlugins/ToolExtract.py:222 appPlugins/ToolExtract.py:986 msgid "Extract" msgstr "" #: appGUI/MainGUI.py:1188 appGUI/MainGUI.py:2582 appGUI/MainGUI.py:5017 #: appPlugins/ToolCopperThieving.py:128 appPlugins/ToolCopperThieving.py:1251 msgid "Copper Thieving" msgstr "" #: appGUI/MainGUI.py:1190 appGUI/MainGUI.py:2584 appGUI/MainGUI.py:5009 #: appPlugins/ToolMarkers.py:143 appPlugins/ToolMarkers.py:1216 msgid "Markers" msgstr "" #: appGUI/MainGUI.py:1192 appGUI/MainGUI.py:2586 appGUI/MainGUI.py:5015 #: appPlugins/ToolPunchGerber.py:66 appPlugins/ToolPunchGerber.py:257 #: appPlugins/ToolPunchGerber.py:1984 appPlugins/ToolPunchGerber.py:2357 msgid "Punch Gerber" msgstr "" #: appGUI/MainGUI.py:1194 appGUI/MainGUI.py:2588 appGUI/MainGUI.py:5010 #: appPlugins/ToolCalculators.py:85 appPlugins/ToolCalculators.py:501 msgid "Calculators" msgstr "" #: appGUI/MainGUI.py:1226 appGUI/MainGUI.py:1252 appGUI/MainGUI.py:1314 #: appGUI/MainGUI.py:2620 appGUI/MainGUI.py:2646 appGUI/MainGUI.py:2700 msgid "Select" msgstr "" #: appGUI/MainGUI.py:1271 appGUI/MainGUI.py:2663 msgid "Add Buffer" msgstr "" #: appGUI/MainGUI.py:1273 appGUI/MainGUI.py:2665 msgid "Paint Shape" msgstr "" #: appGUI/MainGUI.py:1281 appGUI/MainGUI.py:2673 msgid "Polygon Explode" msgstr "" #: appGUI/MainGUI.py:1287 msgid "" "Polygon Subtraction. First selected is the target.\n" "The rest of the selected is subtracted from the first.\n" "First selected is replaced by the result." msgstr "" #: appGUI/MainGUI.py:1292 msgid "" "Alt Subtraction. First selected is the target.\n" "The rest of the selected is subtracted from the first.\n" "First selected is kept besides the result." msgstr "" #: appGUI/MainGUI.py:1300 msgid "Copy Shape(s)" msgstr "" #: appGUI/MainGUI.py:1305 appGUI/MainGUI.py:1350 appGUI/MainGUI.py:1868 #: appGUI/MainGUI.py:1905 appGUI/MainGUI.py:2690 appGUI/MainGUI.py:2736 #: appGUI/MainGUI.py:5027 appGUI/ObjectUI.py:92 appGUI/ObjectUI.py:147 msgid "Transformations" msgstr "" #: appGUI/MainGUI.py:1308 appGUI/MainGUI.py:2694 msgid "Move Objects" msgstr "" #: appGUI/MainGUI.py:1327 appGUI/MainGUI.py:1889 appGUI/MainGUI.py:2713 msgid "SemiDisc" msgstr "" #: appGUI/MainGUI.py:1329 appGUI/MainGUI.py:1891 appGUI/MainGUI.py:2715 msgid "Disc" msgstr "" #: appGUI/MainGUI.py:1339 appGUI/MainGUI.py:2725 msgid "Import Shape" msgstr "" #: appGUI/MainGUI.py:1361 msgid "Snap to grid" msgstr "" #: appGUI/MainGUI.py:1364 msgid "Grid X snapping distance" msgstr "" #: appGUI/MainGUI.py:1369 msgid "" "When active, value on Grid_X\n" "is copied to the Grid_Y value." msgstr "" #: appGUI/MainGUI.py:1376 msgid "Grid Y snapping distance" msgstr "" #: appGUI/MainGUI.py:1387 msgid "Snap to corner" msgstr "" #: appGUI/MainGUI.py:1391 appGUI/preferences/general/GeneralAPPSetGroupUI.py:76 msgid "Max. magnet distance" msgstr "" #: appGUI/MainGUI.py:1401 msgid "Toggle the display of axis on canvas" msgstr "" #: appGUI/MainGUI.py:1413 msgid "HUD (Heads up display)" msgstr "" #: appGUI/MainGUI.py:1419 appGUI/preferences/general/GeneralAPPSetGroupUI.py:104 msgid "" "Draw a delimiting rectangle on canvas.\n" "The purpose is to illustrate the limits for our work." msgstr "" #: appGUI/MainGUI.py:1432 msgid "" "Relative measurement.\n" "Reference is last click position" msgstr "" #: appGUI/MainGUI.py:1440 msgid "" "Absolute measurement.\n" "Reference is (X=0, Y= 0) position" msgstr "" #: appGUI/MainGUI.py:1447 msgid "TCL Shell" msgstr "" #: appGUI/MainGUI.py:1521 appGUI/MainGUI.py:1529 appGUI/MainGUI.py:2879 #: appGUI/MainGUI.py:2885 appMain.py:2985 appMain.py:10382 msgid "Plot Area" msgstr "" #: appGUI/MainGUI.py:1623 msgid "CNC-JOB" msgstr "" #: appGUI/MainGUI.py:1633 msgid "Engraving" msgstr "" #: appGUI/MainGUI.py:1643 msgid "Processing" msgstr "" #: appGUI/MainGUI.py:1653 msgid "Extra Plugins" msgstr "" #: appGUI/MainGUI.py:1664 msgid "UTILITIES" msgstr "" #: appGUI/MainGUI.py:1682 appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:216 msgid "Restore Defaults" msgstr "" #: appGUI/MainGUI.py:1686 msgid "" "Restore the entire set of default values\n" "to the initial values loaded after first launch." msgstr "" #: appGUI/MainGUI.py:1691 msgid "Open Pref Folder" msgstr "" #: appGUI/MainGUI.py:1695 msgid "Open the folder where FlatCAM save the preferences files." msgstr "" #: appGUI/MainGUI.py:1699 appGUI/MainGUI.py:2425 msgid "Clear GUI Settings" msgstr "" #: appGUI/MainGUI.py:1704 msgid "" "Clear the GUI settings for FlatCAM,\n" "such as: layout, gui state, style etc." msgstr "" #: appGUI/MainGUI.py:1720 msgid "Apply the current preferences without saving to a file." msgstr "" #: appGUI/MainGUI.py:1728 msgid "" "Save the current settings in the 'current_defaults' file\n" "which is the file storing the working default preferences." msgstr "" #: appGUI/MainGUI.py:1736 msgid "Will not save the changes and will close the preferences window." msgstr "" #: appGUI/MainGUI.py:1753 msgid "Toggle Visibility" msgstr "" #: appGUI/MainGUI.py:1780 msgid "Grids" msgstr "" #: appGUI/MainGUI.py:1858 msgid "Union" msgstr "" #: appGUI/MainGUI.py:1860 msgid "Intersection" msgstr "" #: appGUI/MainGUI.py:1862 msgid "Subtraction" msgstr "" #: appGUI/MainGUI.py:1877 msgid "Pad" msgstr "" #: appGUI/MainGUI.py:1879 msgid "Pad Array" msgstr "" #: appGUI/MainGUI.py:1883 msgid "Track" msgstr "" #: appGUI/MainGUI.py:1885 msgid "Region" msgstr "" #: appGUI/MainGUI.py:1908 msgid "Exc Editor" msgstr "" #: appGUI/MainGUI.py:1936 msgid "Move2Origin" msgstr "" #: appGUI/MainGUI.py:1965 msgid "Application units" msgstr "" #: appGUI/MainGUI.py:2066 msgid "Lock Toolbars" msgstr "" #: appGUI/MainGUI.py:2324 msgid "Detachable Tabs" msgstr "" #: appGUI/MainGUI.py:2408 msgid "FlatCAM Preferences Folder opened." msgstr "" #: appGUI/MainGUI.py:2426 msgid "Are you sure you want to delete the GUI Settings? \n" msgstr "" #: appGUI/MainGUI.py:2433 appGUI/preferences/PreferencesUIManager.py:1152 #: appGUI/preferences/PreferencesUIManager.py:1392 appMain.py:2763 appMain.py:4050 #: appMain.py:6855 appMain.py:10259 appMain.py:12057 appPlugins/ToolImage.py:172 #: appTranslation.py:120 appTranslation.py:225 msgid "Yes" msgstr "" #: appGUI/MainGUI.py:2434 appGUI/preferences/PreferencesUIManager.py:1393 appMain.py:2764 #: appMain.py:4051 appMain.py:6856 appMain.py:10260 appMain.py:12058 #: appPlugins/ToolImage.py:173 appTranslation.py:121 appTranslation.py:226 msgid "No" msgstr "" #: appGUI/MainGUI.py:2686 msgid "Copy Objects" msgstr "" #: appGUI/MainGUI.py:2760 msgid "Key Shortcut List" msgstr "" #: appGUI/MainGUI.py:3480 msgid "" "Please first select a geometry item to be cut\n" "then select the geometry item that will be cut\n" "out of the first item. In the end press ~X~ key or\n" "the toolbar button." msgstr "" #: appGUI/MainGUI.py:3486 appGUI/MainGUI.py:3673 appGUI/MainGUI.py:3723 #: appGUI/MainGUI.py:3747 msgid "Warning" msgstr "" #: appGUI/MainGUI.py:3669 msgid "" "Please select geometry items \n" "on which to perform Intersection Tool." msgstr "" #: appGUI/MainGUI.py:3719 msgid "" "Please select geometry items \n" "on which to perform Subtraction." msgstr "" #: appGUI/MainGUI.py:3743 msgid "" "Please select geometry items \n" "on which to perform union." msgstr "" #: appGUI/MainGUI.py:4270 appMain.py:5156 appPlugins/ToolIsolation.py:992 #: appPlugins/ToolNCC.py:1363 appPlugins/ToolPaint.py:651 appPlugins/ToolSolderPaste.py:364 #: appPlugins/ToolSolderPaste.py:1311 msgid "New Tool" msgstr "" #: appGUI/MainGUI.py:4271 appMain.py:5157 appPlugins/ToolIsolation.py:993 #: appPlugins/ToolNCC.py:1364 appPlugins/ToolPaint.py:652 appPlugins/ToolSolderPaste.py:365 msgid "Enter a Tool Diameter" msgstr "" #: appGUI/MainGUI.py:4283 appMain.py:5173 appPlugins/ToolIsolation.py:1014 #: appPlugins/ToolNCC.py:1385 appPlugins/ToolPaint.py:665 appPlugins/ToolSolderPaste.py:377 msgid "Adding Tool cancelled" msgstr "" #: appGUI/MainGUI.py:4563 appMain.py:4036 msgid "Application is saving the project. Please wait ..." msgstr "" #: appGUI/MainGUI.py:4599 msgid "Shortcut Key List" msgstr "" #: appGUI/MainGUI.py:4611 msgid "General Shortcut list" msgstr "" #: appGUI/MainGUI.py:4715 msgid "SHOW SHORTCUT LIST" msgstr "" #: appGUI/MainGUI.py:4716 msgid "1" msgstr "" #: appGUI/MainGUI.py:4716 msgid "Switch to Project Tab" msgstr "" #: appGUI/MainGUI.py:4717 msgid "2" msgstr "" #: appGUI/MainGUI.py:4717 msgid "Switch to Selected Tab" msgstr "" #: appGUI/MainGUI.py:4718 msgid "3" msgstr "" #: appGUI/MainGUI.py:4718 msgid "Switch to Tool Tab" msgstr "" #: appGUI/MainGUI.py:4719 msgid "New Gerber" msgstr "" #: appGUI/MainGUI.py:4720 msgid "Edit Object (if selected)" msgstr "" #: appGUI/MainGUI.py:4721 appMain.py:7252 msgid "Grid On/Off" msgstr "" #: appGUI/MainGUI.py:4722 msgid "Jump to Coordinates" msgstr "" #: appGUI/MainGUI.py:4723 msgid "New Excellon" msgstr "" #: appGUI/MainGUI.py:4724 msgid "Move Obj" msgstr "" #: appGUI/MainGUI.py:4725 msgid "New Geometry" msgstr "" #: appGUI/MainGUI.py:4727 msgid "Change Units" msgstr "" #: appGUI/MainGUI.py:4728 msgid "Open Properties Plugin" msgstr "" #: appGUI/MainGUI.py:4729 msgid "Rotate by 90 degree CW" msgstr "" #: appGUI/MainGUI.py:4730 msgid "Shell Toggle" msgstr "" #: appGUI/MainGUI.py:4731 msgid "Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)" msgstr "" #: appGUI/MainGUI.py:4733 msgid "Flip on X_axis" msgstr "" #: appGUI/MainGUI.py:4734 msgid "Flip on Y_axis" msgstr "" #: appGUI/MainGUI.py:4795 msgid "Copy Obj" msgstr "" #: appGUI/MainGUI.py:4796 msgid "Open Tools Database" msgstr "" #: appGUI/MainGUI.py:4797 msgid "Open Excellon File" msgstr "" #: appGUI/MainGUI.py:4798 msgid "Open Gerber File" msgstr "" #: appGUI/MainGUI.py:4799 appGUI/MainGUI.py:5321 msgid "Ctrl+M" msgstr "" #: appGUI/MainGUI.py:4870 msgid "Toggle the axis" msgstr "" #: appGUI/MainGUI.py:4871 msgid "Shift+C" msgstr "" #: appGUI/MainGUI.py:4871 msgid "Copy Obj_Name" msgstr "" #: appGUI/MainGUI.py:4876 appGUI/MainGUI.py:5315 appGUI/MainGUI.py:5426 #: appGUI/MainGUI.py:5572 msgid "Shift+M" msgstr "" #: appGUI/MainGUI.py:4876 appGUI/MainGUI.py:5315 appGUI/MainGUI.py:5426 #: appGUI/MainGUI.py:5572 msgid "Distance Minimum Tool" msgstr "" #: appGUI/MainGUI.py:4877 msgid "Open Preferences Window" msgstr "" #: appGUI/MainGUI.py:4878 msgid "Shift+R" msgstr "" #: appGUI/MainGUI.py:4878 msgid "Rotate by 90 degree CCW" msgstr "" #: appGUI/MainGUI.py:4879 msgid "Run a Script" msgstr "" #: appGUI/MainGUI.py:4880 msgid "Toggle the workspace" msgstr "" #: appGUI/MainGUI.py:5009 msgid "Alt+B" msgstr "" #: appGUI/MainGUI.py:5010 msgid "Alt+C" msgstr "" #: appGUI/MainGUI.py:5011 msgid "Alt+D" msgstr "" #: appGUI/MainGUI.py:5011 msgid "2-Sided PCB" msgstr "" #: appGUI/MainGUI.py:5012 msgid "Alt+E" msgstr "" #: appGUI/MainGUI.py:5013 msgid "Alt+F" msgstr "" #: appGUI/MainGUI.py:5013 appPlugins/ToolFiducials.py:129 appPlugins/ToolFiducials.py:894 msgid "Fiducials" msgstr "" #: appGUI/MainGUI.py:5014 msgid "Alt+G" msgstr "" #: appGUI/MainGUI.py:5014 appPlugins/ToolInvertGerber.py:91 #: appPlugins/ToolInvertGerber.py:194 appPlugins/ToolInvertGerber.py:282 msgid "Invert Gerber" msgstr "" #: appGUI/MainGUI.py:5015 msgid "Alt+H" msgstr "" #: appGUI/MainGUI.py:5016 msgid "Alt+I" msgstr "" #: appGUI/MainGUI.py:5017 msgid "Alt+J" msgstr "" #: appGUI/MainGUI.py:5018 msgid "Alt+K" msgstr "" #: appGUI/MainGUI.py:5018 msgid "Solder Paste Dispensing" msgstr "" #: appGUI/MainGUI.py:5019 msgid "Alt+L" msgstr "" #: appGUI/MainGUI.py:5019 msgid "Film PCB" msgstr "" #: appGUI/MainGUI.py:5020 msgid "Alt+M" msgstr "" #: appGUI/MainGUI.py:5021 appPlugins/ToolNCC.py:2263 appPlugins/ToolNCC.py:2265 #: appPlugins/ToolNCC.py:2855 appPlugins/ToolNCC.py:2857 msgid "Non-Copper Clearing" msgstr "" #: appGUI/MainGUI.py:5022 msgid "Alt+O" msgstr "" #: appGUI/MainGUI.py:5022 appPlugins/ToolIsolation.py:3496 appPlugins/ToolNCC.py:4212 msgid "Optimal" msgstr "" #: appGUI/MainGUI.py:5023 msgid "Alt+P" msgstr "" #: appGUI/MainGUI.py:5023 msgid "Paint Area" msgstr "" #: appGUI/MainGUI.py:5024 msgid "Alt+Q" msgstr "" #: appGUI/MainGUI.py:5024 appPlugins/ToolQRCode.py:112 appPlugins/ToolQRCode.py:708 msgid "QRCode" msgstr "" #: appGUI/MainGUI.py:5025 msgid "Rules Check" msgstr "" #: appGUI/MainGUI.py:5026 msgid "View File Source" msgstr "" #: appGUI/MainGUI.py:5027 msgid "Alt+T" msgstr "" #: appGUI/MainGUI.py:5028 msgid "Alt+W" msgstr "" #: appGUI/MainGUI.py:5028 appPlugins/ToolSub.py:151 appPlugins/ToolSub.py:764 msgid "Subtract" msgstr "" #: appGUI/MainGUI.py:5029 appGUI/MainGUI.py:5319 msgid "Alt+X" msgstr "" #: appGUI/MainGUI.py:5029 msgid "Cutout PCB" msgstr "" #: appGUI/MainGUI.py:5030 msgid "Alt+Z" msgstr "" #: appGUI/MainGUI.py:5030 appPlugins/ToolPanelize.py:20 msgid "Panelize PCB" msgstr "" #: appGUI/MainGUI.py:5033 msgid "Enable Non-selected Objects" msgstr "" #: appGUI/MainGUI.py:5034 msgid "Disable Non-selected Objects" msgstr "" #: appGUI/MainGUI.py:5035 msgid "Toggle Full Screen" msgstr "" #: appGUI/MainGUI.py:5061 msgid "Ctrl+Alt+X" msgstr "" #: appGUI/MainGUI.py:5061 msgid "Abort current task (gracefully)" msgstr "" #: appGUI/MainGUI.py:5065 msgid "Ctrl+Shift+V" msgstr "" #: appGUI/MainGUI.py:5065 msgid "Paste Special. Will convert a Windows path style to the one required in Tcl Shell" msgstr "" #: appGUI/MainGUI.py:5117 msgid "Open Online Manual" msgstr "" #: appGUI/MainGUI.py:5118 msgid "F2" msgstr "" #: appGUI/MainGUI.py:5118 msgid "Rename Objects" msgstr "" #: appGUI/MainGUI.py:5119 msgid "Open Online Tutorials" msgstr "" #: appGUI/MainGUI.py:5120 msgid "Refresh Plots" msgstr "" #: appGUI/MainGUI.py:5121 appPlugins/ToolSolderPaste.py:1745 msgid "Delete Object" msgstr "" #: appGUI/MainGUI.py:5122 appGUI/MainGUI.py:5428 msgid "Alternate: Delete Tool" msgstr "" #: appGUI/MainGUI.py:5123 msgid "(left to Key_1)Toggle Notebook Area (Left Side)" msgstr "" #: appGUI/MainGUI.py:5124 appGUI/MainGUI.py:5324 appGUI/MainGUI.py:5430 #: appGUI/MainGUI.py:5571 msgid "Space" msgstr "" #: appGUI/MainGUI.py:5124 msgid "En(Dis)able Obj Plot" msgstr "" #: appGUI/MainGUI.py:5125 appGUI/MainGUI.py:5326 appGUI/MainGUI.py:5429 #: appGUI/MainGUI.py:5570 msgid "Esc" msgstr "" #: appGUI/MainGUI.py:5125 msgid "Deselects all objects" msgstr "" #: appGUI/MainGUI.py:5140 msgid "Editor Shortcut list" msgstr "" #: appGUI/MainGUI.py:5295 msgid "GEOMETRY EDITOR" msgstr "" #: appGUI/MainGUI.py:5296 msgid "Draw an Arc" msgstr "" #: appGUI/MainGUI.py:5297 appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:215 msgid "Buffer Tool" msgstr "" #: appGUI/MainGUI.py:5298 msgid "Copy Geo Item" msgstr "" #: appGUI/MainGUI.py:5299 msgid "Within Add Arc will toogle the ARC direction: CW or CCW" msgstr "" #: appGUI/MainGUI.py:5300 msgid "Polygon Intersection Tool" msgstr "" #: appGUI/MainGUI.py:5301 msgid "Geo Paint Tool" msgstr "" #: appGUI/MainGUI.py:5302 appGUI/MainGUI.py:5420 appGUI/MainGUI.py:5560 msgid "Jump to Location (x, y)" msgstr "" #: appGUI/MainGUI.py:5304 msgid "Move Geo Item" msgstr "" #: appGUI/MainGUI.py:5305 msgid "Within Add Arc will cycle through the ARC modes" msgstr "" #: appGUI/MainGUI.py:5306 msgid "Draw a Polygon" msgstr "" #: appGUI/MainGUI.py:5307 msgid "Draw a Circle" msgstr "" #: appGUI/MainGUI.py:5308 msgid "Draw a Path" msgstr "" #: appGUI/MainGUI.py:5309 msgid "Draw Rectangle" msgstr "" #: appGUI/MainGUI.py:5310 msgid "Polygon Subtraction Tool" msgstr "" #: appGUI/MainGUI.py:5311 msgid "Add Text Tool" msgstr "" #: appGUI/MainGUI.py:5312 msgid "Polygon Union Tool" msgstr "" #: appGUI/MainGUI.py:5313 msgid "Flip shape on X axis" msgstr "" #: appGUI/MainGUI.py:5314 msgid "Flip shape on Y axis" msgstr "" #: appGUI/MainGUI.py:5316 msgid "Skew shape on X axis" msgstr "" #: appGUI/MainGUI.py:5317 msgid "Skew shape on Y axis" msgstr "" #: appGUI/MainGUI.py:5318 msgid "Editor Transformation Tool" msgstr "" #: appGUI/MainGUI.py:5319 msgid "Offset shape on X axis" msgstr "" #: appGUI/MainGUI.py:5320 msgid "Alt+Y" msgstr "" #: appGUI/MainGUI.py:5320 msgid "Offset shape on Y axis" msgstr "" #: appGUI/MainGUI.py:5322 appGUI/MainGUI.py:5431 appGUI/MainGUI.py:5574 msgid "Save Object and Exit Editor" msgstr "" #: appGUI/MainGUI.py:5323 msgid "Polygon Cut Tool" msgstr "" #: appGUI/MainGUI.py:5324 msgid "Rotate Geometry" msgstr "" #: appGUI/MainGUI.py:5325 msgid "ENTER" msgstr "" #: appGUI/MainGUI.py:5325 msgid "Finish drawing for certain tools" msgstr "" #: appGUI/MainGUI.py:5326 appGUI/MainGUI.py:5429 appGUI/MainGUI.py:5570 msgid "Abort and return to Select" msgstr "" #: appGUI/MainGUI.py:5416 msgid "EXCELLON EDITOR" msgstr "" #: appGUI/MainGUI.py:5424 msgid "Add a new Tool" msgstr "" #: appGUI/MainGUI.py:5430 msgid "Toggle Slot direction" msgstr "" #: appGUI/MainGUI.py:5432 msgid "Ctrl+Space" msgstr "" #: appGUI/MainGUI.py:5432 appGUI/MainGUI.py:5571 msgid "Toggle array direction" msgstr "" #: appGUI/MainGUI.py:5554 msgid "GERBER EDITOR" msgstr "" #: appGUI/MainGUI.py:5564 msgid "Within Track & Region Tools will cycle in REVERSE the bend modes" msgstr "" #: appGUI/MainGUI.py:5567 msgid "Within Track & Region Tools will cycle FORWARD the bend modes" msgstr "" #: appGUI/MainGUI.py:5569 msgid "Alternate: Delete Apertures" msgstr "" #: appGUI/MainGUI.py:5573 msgid "Eraser Tool" msgstr "" #: appGUI/MainGUI.py:5575 appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:265 msgid "Mark Area Tool" msgstr "" #: appGUI/MainGUI.py:5576 msgid "Poligonize Tool" msgstr "" #: appGUI/MainGUI.py:5577 msgid "Transformation Tool" msgstr "" #: appGUI/ObjectUI.py:32 msgid "App Object" msgstr "" #: appGUI/ObjectUI.py:94 appGUI/ObjectUI.py:150 msgid "Geometrical transformations of the current object." msgstr "" #: appGUI/ObjectUI.py:116 msgid "" "Factor by which to multiply\n" "geometric features of this object.\n" "Expressions are allowed. E.g: 1/25.4" msgstr "" #: appGUI/ObjectUI.py:123 msgid "Perform scaling operation." msgstr "" #: appGUI/ObjectUI.py:133 msgid "" "Amount by which to move the object\n" "in the x and y axes in (x, y) format.\n" "Expressions are allowed. E.g: (1/3.2, 0.5*3)" msgstr "" #: appGUI/ObjectUI.py:140 msgid "Perform the offset operation." msgstr "" #: appGUI/ObjectUI.py:183 msgid "Gerber Object" msgstr "" #: appGUI/ObjectUI.py:185 appGUI/ObjectUI.py:580 appGUI/ObjectUI.py:875 #: appGUI/ObjectUI.py:1193 msgid "General Information" msgstr "" #: appGUI/ObjectUI.py:186 appGUI/ObjectUI.py:581 appGUI/ObjectUI.py:876 #: appGUI/ObjectUI.py:1194 msgid "General data about the object." msgstr "" #: appGUI/ObjectUI.py:200 appGUI/ObjectUI.py:596 appGUI/ObjectUI.py:890 #: appGUI/ObjectUI.py:1209 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:27 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:30 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:29 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:28 msgid "Plot Options" msgstr "" #: appGUI/ObjectUI.py:205 appGUI/ObjectUI.py:599 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:47 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:50 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137 #: appPlugins/ToolCopperThieving.py:1424 msgid "Solid" msgstr "" #: appGUI/ObjectUI.py:207 appGUI/preferences/gerber/GerberGenPrefGroupUI.py:52 msgid "Solid color polygons." msgstr "" #: appGUI/ObjectUI.py:212 appGUI/ObjectUI.py:605 appGUI/ObjectUI.py:896 msgid "Multi-Color" msgstr "" #: appGUI/ObjectUI.py:214 appGUI/ObjectUI.py:607 appGUI/ObjectUI.py:898 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:56 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:48 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:59 msgid "Draw polygons in different colors." msgstr "" #: appGUI/ObjectUI.py:229 appGUI/ObjectUI.py:674 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:40 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:39 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:43 msgid "Plot" msgstr "" #: appGUI/ObjectUI.py:230 appGUI/ObjectUI.py:676 appGUI/ObjectUI.py:979 #: appGUI/ObjectUI.py:1377 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:38 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:41 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:45 appPlugins/ToolMilling.py:4010 msgid "Plot (show) this object." msgstr "" #: appGUI/ObjectUI.py:238 appGUI/ObjectUI.py:429 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:37 appPlugins/ToolFollow.py:750 msgid "" "Generate a 'Follow' geometry.\n" "This means that it will cut through\n" "the middle of the trace." msgstr "" #: appGUI/ObjectUI.py:247 appGUI/ObjectUI.py:630 appGUI/ObjectUI.py:918 #: appGUI/ObjectUI.py:1243 msgid "Start the Object Editor" msgstr "" #: appGUI/ObjectUI.py:252 appGUI/ObjectUI.py:635 appGUI/ObjectUI.py:923 #: appGUI/ObjectUI.py:1247 msgid "INFO" msgstr "" #: appGUI/ObjectUI.py:254 appGUI/ObjectUI.py:637 appGUI/ObjectUI.py:925 #: appGUI/ObjectUI.py:1249 msgid "Show the Object Attributes." msgstr "" #: appGUI/ObjectUI.py:276 appGUI/ObjectUI.py:659 appGUI/ObjectUI.py:947 #: appGUI/ObjectUI.py:1343 msgid "Tools/apertures in the loaded object." msgstr "" #: appGUI/ObjectUI.py:297 appGUI/ObjectUI.py:669 #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:44 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:46 msgid "Toggle the display of the Tools Table." msgstr "" #: appGUI/ObjectUI.py:306 msgid "Mark All" msgstr "" #: appGUI/ObjectUI.py:308 msgid "" "When checked it will display all the apertures.\n" "When unchecked, it will delete all mark shapes\n" "that are drawn on canvas." msgstr "" #: appGUI/ObjectUI.py:338 appPlugins/ToolExtract.py:1114 appPlugins/ToolPunchGerber.py:2126 msgid "Mark the aperture instances on canvas." msgstr "" #: appGUI/ObjectUI.py:345 appPlugins/ToolIsolation.py:3982 msgid "Buffer Solid Geometry" msgstr "" #: appGUI/ObjectUI.py:347 appPlugins/ToolIsolation.py:3984 msgid "" "This button is shown only when the Gerber file\n" "is loaded without buffering.\n" "Clicking this will create the buffered geometry\n" "required for isolation." msgstr "" #: appGUI/ObjectUI.py:373 msgid "Isolation Routing" msgstr "" #: appGUI/ObjectUI.py:376 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:27 #: appPlugins/ToolIsolation.py:3366 msgid "" "Create a Geometry object with\n" "toolpaths to cut around polygons." msgstr "" #: appGUI/ObjectUI.py:385 msgid "" "Generate the geometry for\n" "the board cutout." msgstr "" #: appGUI/ObjectUI.py:400 appPlugins/ToolFilm.py:1242 msgid "Create a positive/negative film for UV exposure." msgstr "" #: appGUI/ObjectUI.py:414 appGUI/ObjectUI.py:1059 appPlugins/ToolNCC.py:4595 msgid "" "Create the Geometry Object\n" "for non-copper routing." msgstr "" #: appGUI/ObjectUI.py:442 appGUI/ObjectUI.py:775 appGUI/ObjectUI.py:1076 #: appPlugins/ToolEtchCompensation.py:327 msgid "Utilities" msgstr "" #: appGUI/ObjectUI.py:444 appGUI/ObjectUI.py:777 appGUI/ObjectUI.py:1078 msgid "Show the Utilities." msgstr "" #: appGUI/ObjectUI.py:461 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:28 msgid "Non-copper regions" msgstr "" #: appGUI/ObjectUI.py:463 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:30 msgid "" "Create polygons covering the\n" "areas without copper on the PCB.\n" "Equivalent to the inverse of this\n" "object. Can be used to remove all\n" "copper from a specified region." msgstr "" #: appGUI/ObjectUI.py:478 appGUI/ObjectUI.py:524 #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:46 #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:80 msgid "Boundary Margin" msgstr "" #: appGUI/ObjectUI.py:480 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:48 msgid "" "Specify the edge of the PCB\n" "by drawing a box around all\n" "objects with this minimum\n" "distance." msgstr "" #: appGUI/ObjectUI.py:497 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:211 appPlugins/ToolFilm.py:1534 msgid "Resulting geometry will have rounded corners." msgstr "" #: appGUI/ObjectUI.py:500 appGUI/ObjectUI.py:545 appPlugins/ToolCutOut.py:2699 #: appPlugins/ToolFollow.py:748 appPlugins/ToolIsolation.py:3967 appPlugins/ToolNCC.py:4592 #: appPlugins/ToolPaint.py:3339 appPlugins/ToolSolderPaste.py:1654 msgid "Generate Geometry" msgstr "" #: appGUI/ObjectUI.py:509 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:71 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:134 appPlugins/ToolPanelize.py:1222 #: appPlugins/ToolQRCode.py:888 msgid "Bounding Box" msgstr "" #: appGUI/ObjectUI.py:511 msgid "" "Create a geometry surrounding the Gerber object.\n" "Square shape." msgstr "" #: appGUI/ObjectUI.py:526 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:82 msgid "" "Distance of the edges of the box\n" "to the nearest polygon." msgstr "" #: appGUI/ObjectUI.py:539 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:95 msgid "" "If the bounding box is \n" "to have rounded corners\n" "their radius is equal to\n" "the margin." msgstr "" #: appGUI/ObjectUI.py:548 msgid "Generate the Geometry object." msgstr "" #: appGUI/ObjectUI.py:575 msgid "Excellon Object" msgstr "" #: appGUI/ObjectUI.py:601 msgid "Solid circles." msgstr "" #: appGUI/ObjectUI.py:709 appPlugins/ToolDrilling.py:2445 appPlugins/ToolMilling.py:4034 msgid "" "This is the Tool Number.\n" "When ToolChange is checked, on toolchange event this value\n" "will be showed as a T1, T2 ... Tn in the Machine Code.\n" "\n" "Here the tools are selected for G-code generation." msgstr "" #: appGUI/ObjectUI.py:714 appGUI/ObjectUI.py:1002 appPlugins/ToolDrilling.py:2450 #: appPlugins/ToolIsolation.py:3444 appPlugins/ToolMilling.py:4039 #: appPlugins/ToolMilling.py:4157 appPlugins/ToolNCC.py:4141 appPlugins/ToolPaint.py:3023 msgid "" "Tool Diameter. Its value\n" "is the cut width into the material." msgstr "" #: appGUI/ObjectUI.py:717 appPlugins/ToolDrilling.py:2453 appPlugins/ToolMilling.py:4042 msgid "" "The number of Drill holes. Holes that are drilled with\n" "a drill bit." msgstr "" #: appGUI/ObjectUI.py:720 appPlugins/ToolDrilling.py:2456 appPlugins/ToolMilling.py:4045 msgid "" "The number of Slot holes. Holes that are created by\n" "milling them with an endmill bit." msgstr "" #: appGUI/ObjectUI.py:723 msgid "Show the color of the drill holes when using multi-color." msgstr "" #: appGUI/ObjectUI.py:725 msgid "" "Toggle display of the drills for the current tool.\n" "This does not select the tools for G-code generation." msgstr "" #: appGUI/ObjectUI.py:734 appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:49 msgid "Auto load from DB" msgstr "" #: appGUI/ObjectUI.py:736 appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:51 msgid "" "Automatic replacement of the tools from related application tools\n" "with tools from DB that have a close diameter value." msgstr "" #: appGUI/ObjectUI.py:757 msgid "Generate GCode from the drill holes in an Excellon object." msgstr "" #: appGUI/ObjectUI.py:765 msgid "Generate a Geometry for milling drills or slots in an Excellon object." msgstr "" #: appGUI/ObjectUI.py:793 msgid "Milling Geometry" msgstr "" #: appGUI/ObjectUI.py:795 msgid "" "Create Geometry for milling holes.\n" "Select from the Tools Table above the hole dias to be\n" "milled. Use the # column to make the selection." msgstr "" #: appGUI/ObjectUI.py:807 appGUI/preferences/tools/ToolsMillPrefGroupUI.py:598 #: appPlugins/ToolMilling.py:4303 msgid "Milling Diameter" msgstr "" #: appGUI/ObjectUI.py:809 msgid "Diameter of the cutting tool." msgstr "" #: appGUI/ObjectUI.py:819 msgid "Mill Drills" msgstr "" #: appGUI/ObjectUI.py:821 msgid "" "Create the Geometry Object\n" "for milling drills." msgstr "" #: appGUI/ObjectUI.py:833 msgid "Mill Slots" msgstr "" #: appGUI/ObjectUI.py:835 msgid "" "Create the Geometry Object\n" "for milling slots." msgstr "" #: appGUI/ObjectUI.py:871 msgid "Geometry Object" msgstr "" #: appGUI/ObjectUI.py:960 msgid "" "Tools in this Geometry object used for cutting.\n" "The 'Offset' entry will set an offset for the cut.\n" "'Offset' can be inside, outside, on path (none) and custom.\n" "'Type' entry is only informative and it allow to know the \n" "intent of using the current tool. \n" "It can be Rough(ing), Finish(ing) or Iso(lation).\n" "The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n" "ball(B), or V-Shaped(V). \n" "When V-shaped is selected the 'Type' entry is automatically \n" "set to Isolation, the CutZ parameter in the UI form is\n" "grayed out and Cut Z is automatically calculated from the newly \n" "showed UI form entries named V-Tip Dia and V-Tip Angle." msgstr "" #: appGUI/ObjectUI.py:977 appGUI/ObjectUI.py:1375 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:37 appPlugins/ToolMilling.py:4009 msgid "Plot Object" msgstr "" #: appGUI/ObjectUI.py:990 appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:1398 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:156 #: appPlugins/ToolCopperThieving.py:1449 appPlugins/ToolMilling.py:4146 msgid "Dia" msgstr "" #: appGUI/ObjectUI.py:997 msgid "" "Tool Number.\n" "When ToolChange is checked, on toolchange event this value\n" "will be showed as a T1, T2 ... Tn" msgstr "" #: appGUI/ObjectUI.py:1006 msgid "Offset Type. The kind of cut offset to be used." msgstr "" #: appGUI/ObjectUI.py:1010 msgid "" "Job Type. Usually the UI form values \n" "are choose based on the operation type and this will serve as a reminder." msgstr "" #: appGUI/ObjectUI.py:1022 msgid "" "Plot column. It is visible only for MultiGeo Geometry objects.\n" "Enable plot for the selected tool geometry." msgstr "" #: appGUI/ObjectUI.py:1041 msgid "Generate a CNCJob by milling a Geometry." msgstr "" #: appGUI/ObjectUI.py:1049 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:30 msgid "" "Creates tool paths to cover the\n" "whole area of a polygon." msgstr "" #: appGUI/ObjectUI.py:1108 appObjects/AppObjectTemplate.py:745 msgid "Points" msgstr "" #: appGUI/ObjectUI.py:1110 msgid "Total of vertex points in the geometry." msgstr "" #: appGUI/ObjectUI.py:1118 appPlugins/ToolCalculators.py:647 #: appPlugins/ToolCalculators.py:1031 msgid "Calculate" msgstr "" #: appGUI/ObjectUI.py:1121 msgid "Calculate the number of vertex points in the geometry." msgstr "" #: appGUI/ObjectUI.py:1187 msgid "CNC Job Object" msgstr "" #: appGUI/ObjectUI.py:1212 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:52 msgid "" "This selects the kind of geometries on the canvas to plot.\n" "Those can be either of type 'Travel' which means the moves\n" "above the work piece or it can be of type 'Cut',\n" "which means the moves that cut into the material." msgstr "" #: appGUI/ObjectUI.py:1221 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:60 msgid "Travel" msgstr "" #: appGUI/ObjectUI.py:1288 appObjects/AppObjectTemplate.py:929 appPlugins/ToolReport.py:581 msgid "Travelled distance" msgstr "" #: appGUI/ObjectUI.py:1290 msgid "" "This is the total travelled distance on X-Y plane.\n" "In current units." msgstr "" #: appGUI/ObjectUI.py:1301 msgid "Estimated time" msgstr "" #: appGUI/ObjectUI.py:1303 msgid "" "This is the estimated time to do the routing/drilling,\n" "without the time spent in ToolChange events." msgstr "" #: appGUI/ObjectUI.py:1323 msgid "Use CNC Code Snippets" msgstr "" #: appGUI/ObjectUI.py:1325 msgid "" "When selected, it will include CNC Code snippets (append and prepend)\n" "defined in the Preferences." msgstr "" #: appGUI/ObjectUI.py:1331 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:68 msgid "Display Annotation" msgstr "" #: appGUI/ObjectUI.py:1333 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:70 msgid "" "This selects if to display text annotation on the plot.\n" "When checked it will display numbers in order for each end\n" "of a travel line." msgstr "" #: appGUI/ObjectUI.py:1357 msgid "CNC Tools Table" msgstr "" #: appGUI/ObjectUI.py:1360 msgid "" "Tools in this CNCJob object used for cutting.\n" "The tool diameter is used for plotting on canvas.\n" "The 'Offset' entry will set an offset for the cut.\n" "'Offset' can be inside, outside, on path (none) and custom.\n" "'Type' entry is only informative and it allow to know the \n" "intent of using the current tool. \n" "It can be Rough(ing), Finish(ing) or Iso(lation).\n" "The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n" "ball(B), or V-Shaped(V)." msgstr "" #: appGUI/ObjectUI.py:1409 msgid "Update Plot" msgstr "" #: appGUI/ObjectUI.py:1411 msgid "Update the plot." msgstr "" #: appGUI/ObjectUI.py:1425 appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:27 #: appPlugins/ToolLevelling.py:1737 msgid "Generate CNC Code with auto-levelled paths." msgstr "" #: appGUI/ObjectUI.py:1446 msgid "Opens dialog to save CNC Code file." msgstr "" #: appGUI/ObjectUI.py:1453 appPlugins/ToolSolderPaste.py:1722 msgid "Review CNC Code." msgstr "" #: appGUI/ObjectUI.py:1487 msgid "Script Object" msgstr "" #: appGUI/ObjectUI.py:1507 appGUI/ObjectUI.py:1577 msgid "Auto Completer" msgstr "" #: appGUI/ObjectUI.py:1509 msgid "This selects if the auto completer is enabled in the Script Editor." msgstr "" #: appGUI/ObjectUI.py:1550 msgid "Document Object" msgstr "" #: appGUI/ObjectUI.py:1579 msgid "This selects if the auto completer is enabled in the Document Editor." msgstr "" #: appGUI/ObjectUI.py:1649 msgid "Font Color" msgstr "" #: appGUI/ObjectUI.py:1651 msgid "Set the font color for the selected text" msgstr "" #: appGUI/ObjectUI.py:1660 msgid "Selection Color" msgstr "" #: appGUI/ObjectUI.py:1662 msgid "Set the selection color when doing text selection." msgstr "" #: appGUI/ObjectUI.py:1670 appGUI/ObjectUI.py:1683 msgid "Alignment" msgstr "" #: appGUI/ObjectUI.py:1688 msgid "Align Left" msgstr "" #: appGUI/ObjectUI.py:1698 msgid "Align Right" msgstr "" #: appGUI/ObjectUI.py:1703 msgid "Justify" msgstr "" #: appGUI/ObjectUI.py:1713 msgid "Tab Size" msgstr "" #: appGUI/ObjectUI.py:1715 msgid "Set the tab size. In pixels." msgstr "" #: appGUI/PlotCanvas.py:254 appGUI/PlotCanvasLegacy.py:409 msgid "Axis enabled." msgstr "" #: appGUI/PlotCanvas.py:262 appGUI/PlotCanvasLegacy.py:418 msgid "Axis disabled." msgstr "" #: appGUI/PlotCanvas.py:300 appGUI/PlotCanvasLegacy.py:439 msgid "HUD enabled." msgstr "" #: appGUI/PlotCanvas.py:309 appGUI/PlotCanvasLegacy.py:446 msgid "HUD disabled." msgstr "" #: appGUI/PlotCanvas.py:410 appGUI/PlotCanvasLegacy.py:548 msgid "Grid enabled." msgstr "" #: appGUI/PlotCanvas.py:417 appGUI/PlotCanvasLegacy.py:558 msgid "Grid disabled." msgstr "" #: appGUI/PlotCanvasLegacy.py:1661 msgid "" "Could not annotate due of a difference between the number of text elements and the number " "of text positions." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1118 msgid "Preferences applied." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1144 msgid "Application will restart" msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1145 msgid "Are you sure you want to continue?" msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1241 msgid "Preferences default values are restored." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1273 appMain.py:3145 appMain.py:10996 msgid "Failed to write defaults to file." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1277 #: appGUI/preferences/PreferencesUIManager.py:1401 msgid "Preferences saved." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1330 msgid "Preferences edited but not saved." msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1384 msgid "" "One or more values are changed.\n" "Do you want to save?" msgstr "" #: appGUI/preferences/PreferencesUIManager.py:1426 msgid "Preferences closed without saving." msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:21 #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:20 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:20 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:21 msgid "Adv. Options" msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:28 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:30 msgid "" "Export and save G-Code to\n" "make this object to a file." msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:40 msgid "Annotation Size" msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:42 msgid "The font size of the annotation text. In pixels." msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:51 msgid "Annotation Color" msgstr "" #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:53 msgid "Set the font color for the annotation texts." msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:30 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:29 msgid "A list of Editor parameters." msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:43 msgid "Prepend to G-Code" msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:45 msgid "" "Type here any G-Code commands you would\n" "like to add at the beginning of the G-Code file." msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:52 msgid "" "Type here any G-Code commands you would like to add at the beginning of the G-Code file." msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:59 msgid "Append to G-Code" msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:61 msgid "" "Type here any G-Code commands you would\n" "like to append to the generated file.\n" "I.e.: M2 (End of program)" msgstr "" #: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:69 msgid "" "Type here any G-Code commands you would like to append to the generated file.\n" "I.e.: M2 (End of program)" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:44 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:61 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:53 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:64 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:43 msgid "Circle Steps" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:46 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:63 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:55 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:66 msgid "" "The number of circle steps for \n" "linear approximation of circles." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:57 msgid "Travel dia" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:59 msgid "" "The width of the travel lines to be\n" "rendered in the plot." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:74 msgid "G-code Decimals" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:85 msgid "" "The number of decimals to be used for \n" "the X, Y, Z coordinates in CNC code (GCODE, etc.)" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:96 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:155 appObjects/AppObjectTemplate.py:896 #: appPlugins/ToolLevelling.py:2192 appPlugins/ToolReport.py:548 #: appPlugins/ToolSolderPaste.py:1477 msgid "Feedrate" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:98 msgid "" "The number of decimals to be used for \n" "the Feedrate parameter in CNC code (GCODE, etc.)" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:109 msgid "Coordinates type" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:111 msgid "" "The type of coordinates to be used in Gcode.\n" "Can be:\n" "- Absolute G90 -> the reference is the origin x=0, y=0\n" "- Incremental G91 -> the reference is the previous position" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:117 msgid "Absolute" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:118 msgid "Incremental" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:128 msgid "Force Windows style line-ending" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:130 msgid "" "When checked will force a Windows style line-ending\n" "(\\r\\n) on non-Windows OS's." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:144 msgid "Travel Line Color" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:154 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:203 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:304 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:170 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:211 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:151 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:234 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:242 appPlugins/ToolRulesCheck.py:1364 #: appPlugins/ToolRulesCheck.py:1379 msgid "Outline" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:156 msgid "Set the travel line color for plotted objects." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:164 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:213 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:314 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:179 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:221 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:254 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:128 #: appPlugins/ToolCopperThieving.py:1415 msgid "Fill" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:166 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:215 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:316 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:256 msgid "" "Set the fill color for plotted objects.\n" "First 6 digits are the color and the last 2\n" "digits are for alpha (transparency) level." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:176 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:326 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:192 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:234 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:266 msgid "Alpha" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:178 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:328 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:268 msgid "Set the fill transparency for plotted objects." msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:193 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:294 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:141 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:223 msgid "Object Color" msgstr "" #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:205 msgid "Set the color for plotted objects." msgstr "" #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:28 msgid "Export G-Code" msgstr "" #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:50 msgid "Plot kind" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:20 msgid "Pre-Processors" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:25 msgid "Compensation" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:27 msgid "Compensate CNC bed issues." msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:38 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:50 msgid "Bed Size" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:40 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:52 msgid "CNC bed size on direction" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:62 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:74 msgid "Bed Offset" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:64 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:76 msgid "CNC bed offset on direction" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:86 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:98 msgid "Bed Skew" msgstr "" #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:88 #: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:100 msgid "CNC bed skew on direction" msgstr "" #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:27 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:27 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:275 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:292 msgid "Advanced Options" msgstr "" #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:29 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:29 msgid "" "A list of advanced parameters.\n" "Those parameters are available only for\n" "Advanced App. Level." msgstr "" #: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:42 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:44 msgid "Table Show/Hide" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:27 msgid "A list of Excellon Editor parameters." msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:38 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:40 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:42 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:169 msgid "Selection limit" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:40 msgid "" "Set the number of selected Excellon geometry\n" "items above which the utility geometry\n" "becomes just a selection rectangle.\n" "Increases the performance when moving a\n" "large number of geometric elements." msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:53 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:115 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:116 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:118 msgid "New Dia" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:66 msgid "Nr of drills" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:68 msgid "Specify how many drills to be in the array." msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:81 msgid "Linear Drill Array" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:91 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:261 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:132 msgid "Linear Direction" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:136 msgid "Circular Drill Array" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:146 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:318 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:186 msgid "Circular Direction" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:159 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:331 #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:199 msgid "Circular Angle" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:238 msgid "Linear Slot Array" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:248 msgid "Nr of slots" msgstr "" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:308 msgid "Circular Slot Array" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:26 #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:26 msgid "Export Options" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:28 msgid "" "The parameters set here are used in the file exported\n" "when using the File -> Export -> Export Excellon menu entry." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:40 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:187 #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:31 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:35 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:96 appPlugins/ToolPcbWizard.py:480 #: appPlugins/ToolReport.py:169 msgid "Units" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:42 #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:48 msgid "The units used in the Excellon file." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:45 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:197 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:40 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:101 appPlugins/ToolPcbWizard.py:478 #: appPlugins/ToolReport.py:355 appPlugins/ToolReport.py:359 appPlugins/ToolReport.py:361 msgid "Inch" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:55 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:50 msgid "Int/Decimals" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:57 msgid "" "The NC drill files, usually named Excellon files\n" "are files that can be found in different formats.\n" "Here we set the format used when the provided\n" "coordinates are not using period." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:69 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:119 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:148 msgid "" "This numbers signify the number of digits in\n" "the whole part of Excellon coordinates." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:82 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:132 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:161 msgid "" "This numbers signify the number of digits in\n" "the decimal part of Excellon coordinates." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:92 #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:40 msgid "Format" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:94 #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:104 msgid "" "Select the kind of coordinates format used.\n" "Coordinates can be saved with decimal point or without.\n" "When there is no decimal point, it is required to specify\n" "the number of digits for integer part and the number of decimals.\n" "Also it will have to be specified if LZ = leading zeros are kept\n" "or TZ = trailing zeros are kept." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:101 msgid "Decimal" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:102 msgid "No-Decimal" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:116 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:169 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:91 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:111 msgid "Zeros" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:119 msgid "" "This sets the type of Excellon zeros.\n" "If LZ then Leading Zeros are kept and\n" "Trailing Zeros are removed.\n" "If TZ is checked then Trailing Zeros are kept\n" "and Leading Zeros are removed." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:126 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:182 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:101 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:121 appPlugins/ToolPcbWizard.py:463 msgid "LZ" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:127 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:183 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:102 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:122 appPlugins/ToolPcbWizard.py:464 msgid "TZ" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:129 msgid "" "This sets the default type of Excellon zeros.\n" "If LZ then Leading Zeros are kept and\n" "Trailing Zeros are removed.\n" "If TZ is checked then Trailing Zeros are kept\n" "and Leading Zeros are removed." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:140 msgid "Slot type" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:143 #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:153 msgid "" "This sets how the slots will be exported.\n" "If ROUTED then the slots will be routed\n" "using M15/M16 commands.\n" "If DRILLED(G85) the slots will be exported\n" "using the Drilled slot command (G85)." msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:150 msgid "Routed" msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:151 msgid "Drilled(G85)" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:54 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:46 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:57 msgid "M-Color" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:80 appPlugins/ToolPcbWizard.py:436 msgid "Excellon Format" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:82 msgid "" "The NC drill files, usually named Excellon files\n" "are files that can be found in different formats.\n" "Here we set the format used when the provided\n" "coordinates are not using period.\n" "\n" "Possible presets:\n" "\n" "PROTEUS 3:3 MM LZ\n" "DipTrace 5:2 MM TZ\n" "DipTrace 4:3 MM LZ\n" "\n" "EAGLE 3:3 MM TZ\n" "EAGLE 4:3 MM TZ\n" "EAGLE 2:5 INCH TZ\n" "EAGLE 3:5 INCH TZ\n" "\n" "ALTIUM 2:4 INCH LZ\n" "Sprint Layout 2:4 INCH LZ\n" "KiCAD 3:5 INCH TZ" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:111 msgid "INCH" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:112 msgid "Default values for INCH are 2:4" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:140 msgid "METRIC" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:141 msgid "Default values for METRIC are 3:3" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:172 msgid "" "This sets the type of Excellon zeros.\n" "If LZ then Leading Zeros are kept and\n" "Trailing Zeros are removed.\n" "If TZ is checked then Trailing Zeros are kept\n" "and Leading Zeros are removed.\n" "\n" "This is used when there is no information\n" "stored in the Excellon file." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:190 msgid "" "This sets the default units of Excellon files.\n" "If it is not detected in the parsed file the value here\n" "will be used.Some Excellon files don't have an header\n" "therefore this parameter will be used." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:200 msgid "" "This sets the units of Excellon files.\n" "Some Excellon files don't have an header\n" "therefore this parameter will be used." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:208 msgid "Update Export settings" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:223 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:72 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:107 appPlugins/ToolPanelize.py:1350 msgid "Path Optimization" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:232 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:81 msgid "Algorithm:" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:234 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:83 msgid "" "This sets the path optimization algorithm.\n" "- Rtre -> Rtree algorithm\n" "- MetaHeuristic -> Google OR-Tools algorithm with\n" "MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n" "- Basic -> Using Google OR-Tools Basic algorithm\n" "- TSA -> Using Travelling Salesman algorithm\n" "\n" "Some options are disabled when the application works in 32bit mode." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:246 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:95 msgid "Rtree" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:247 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:341 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:345 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:352 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:96 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:166 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:170 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:177 msgid "MetaHeuristic" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:248 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:341 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:345 #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:352 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:97 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:166 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:170 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:177 msgid "Basic" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:249 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:98 msgid "TSA" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:255 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:104 msgid "Duration" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:258 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:106 msgid "" "When OR-Tools Metaheuristic (MH) is enabled there is a\n" "maximum threshold for how much time is spent doing the\n" "path optimization. This max duration is set here.\n" "In seconds." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:275 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:122 msgid "Join Option" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:284 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:131 msgid "Fuse Tools" msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:286 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:133 msgid "" "When checked, the tools will be merged\n" "but only if they share some of their attributes." msgstr "" #: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:306 #: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:153 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:244 msgid "Set the line color for plotted objects." msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:29 msgid "" "Parameters used to create a CNC Job object\n" "for this drill object." msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:41 msgid "Mill Holes" msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:43 msgid "Create Geometry for milling holes." msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:47 msgid "Drill Tool dia" msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:49 msgid "" "Diameter of the cutting tool\n" "when milling drill holes." msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:59 msgid "Slot Tool dia" msgstr "" #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:61 msgid "" "Diameter of the cutting tool\n" "when milling slot holes." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:21 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:71 msgid "App Settings" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:40 msgid "Grid Settings" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:51 appMain.py:8667 msgid "X value" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:53 msgid "This is the Grid snap value on X axis." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:63 appMain.py:8670 msgid "Y value" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:65 msgid "This is the Grid snap value on Y axis." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:75 msgid "Snap Max" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:93 msgid "Workspace Settings" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:102 msgid "Active" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:112 msgid "" "Select the type of rectangle to be used on canvas,\n" "as valid workspace." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:178 msgid "Orientation" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:179 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:291 appPlugins/ToolFilm.py:1678 msgid "" "Can be:\n" "- Portrait\n" "- Landscape" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:183 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:165 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:295 appMain.py:8687 #: appPlugins/ToolFilm.py:1682 msgid "Portrait" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:184 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:166 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:296 appMain.py:8689 #: appPlugins/ToolFilm.py:1683 msgid "Landscape" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:194 msgid "Font Size" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:204 msgid "Notebook" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:206 msgid "" "This sets the font size for the elements found in the Notebook.\n" "The notebook is the collapsible area in the left side of the GUI,\n" "and include the Project, Selected and Tool tabs." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:225 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:286 appMain.py:8675 #: appPlugins/ToolDblSided.py:855 appPlugins/ToolFilm.py:1493 msgid "Axis" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:227 msgid "This sets the font size for canvas axis." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:244 msgid "Textbox" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:246 msgid "" "This sets the font size for the Textbox GUI\n" "elements that are used in the application." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:264 appMain.py:8692 msgid "HUD" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:266 msgid "This sets the font size for the Heads Up Display." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:296 msgid "Axis Color" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:298 msgid "Set the color of the screen axis." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:308 msgid "Mouse Settings" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:318 msgid "Cursor Shape" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:320 msgid "" "Choose a mouse cursor shape.\n" "- Small -> with a customizable size.\n" "- Big -> Infinite lines" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:326 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:204 msgid "Small" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:327 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:205 msgid "Big" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:334 msgid "Cursor Size" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:336 msgid "Set the size of the mouse cursor, in pixels." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:347 msgid "Cursor Width" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:349 msgid "Set the line width of the mouse cursor, in pixels." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:360 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:367 msgid "Cursor Color" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:362 msgid "Check this box to color mouse cursor." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:369 msgid "Set the color of the mouse cursor." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:385 msgid "Pan Button" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:387 msgid "" "Select the mouse button to use for panning:\n" "- MMB --> Middle Mouse Button\n" "- RMB --> Right Mouse Button" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:391 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:237 msgid "MMB" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:392 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:238 msgid "RMB" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:398 msgid "Multi-Selection" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:400 msgid "Select the key used for multiple selection." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:402 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:244 msgid "CTRL" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:403 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:245 msgid "SHIFT" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:421 msgid "Delete object confirmation" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:423 msgid "" "When checked the application will ask for user confirmation\n" "whenever the Delete object(s) event is triggered, either by\n" "menu shortcut or key shortcut." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:429 msgid "Allow Edit" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:431 msgid "" "When checked, the user can edit the object names in the Project Tab\n" "by clicking on the object name. Active after restart." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:437 msgid "\"Open\" behavior" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:439 msgid "" "When checked the path for the last saved file is used when saving files,\n" "and the path for the last opened file is used when opening files.\n" "\n" "When unchecked the path for opening files is the one used last: either the\n" "path for saving files or the path for opening files." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:448 msgid "Enable ToolTips" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:450 msgid "" "Check this box if you want to have toolTips displayed\n" "when hovering with mouse over items throughout the App." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:459 msgid "Bookmarks limit" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:461 msgid "" "The maximum number of bookmarks that may be installed in the menu.\n" "The number of bookmarks in the bookmark manager may be greater\n" "but the menu will hold only so much." msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:470 msgid "Activity Icon" msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:472 msgid "Select the GIF that show activity when FlatCAM is active." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:24 msgid "App Preferences" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:32 msgid "" "The default value for the application units.\n" "Whatever is selected here is set every time\n" "the application is started." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:45 appPlugins/ToolCalculators.py:537 msgid "inch" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:52 msgid "Precision MM" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:54 msgid "" "The number of decimals used throughout the application\n" "when the set units are in METRIC system.\n" "Any change here require an application restart." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:66 msgid "Precision Inch" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:68 msgid "" "The number of decimals used throughout the application\n" "when the set units are in INCH system.\n" "Any change here require an application restart." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:92 msgid "Graphic Engine" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:93 msgid "" "Choose what graphic engine to use in FlatCAM.\n" "Legacy(2D) -> reduced functionality, slow performance but enhanced compatibility.\n" "OpenGL(3D) -> full functionality, high performance\n" "Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n" "Intel HD3000 or older. In this case the plot area will be black therefore\n" "use the Legacy(2D) mode." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:100 msgid "3D" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:111 msgid "Workers number" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:113 msgid "" "The number of Qthreads made available to the App.\n" "A bigger number may finish the jobs more quickly but\n" "depending on your computer speed, may make the App\n" "unresponsive. Can have a value between 2 and 16.\n" "Default value is 2.\n" "After change, it will be applied at next App start." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:127 msgid "Geo Tolerance" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:129 msgid "" "This value can counter the effect of the Circle Steps\n" "parameter. Default value is 0.005.\n" "A lower value will increase the detail both in image\n" "and in Gcode for the circles, with a higher cost in\n" "performance. Higher value will provide more\n" "performance at the expense of level of detail." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:144 msgid "Portable app" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:145 msgid "" "Choose if the application should run as portable.\n" "\n" "If Checked the application will run portable,\n" "which means that the preferences files will be saved\n" "in the application folder, in the lib\\config subfolder." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:153 msgid "Verbose log" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:154 msgid "" "Set the log level.\n" "Values:\n" "0 -> logging is disabled\n" "1 -> logging is done only in console\n" "2 -> verbose logging with messages in the Tcl Shell\n" "Require restart." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:169 msgid "Application Level" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:170 msgid "" "Choose the default level of usage for FlatCAM.\n" "BASIC level -> reduced functionality, best for beginner's.\n" "ADVANCED level -> full functionality.\n" "\n" "The choice here will influence the parameters in\n" "the Selected Tab for all kinds of FlatCAM objects." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:192 msgid "Languages" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:193 msgid "Set the language used throughout FlatCAM." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:206 appTranslation.py:114 msgid "Apply Language" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:207 msgid "" "Set the language used throughout FlatCAM.\n" "The app will restart after click." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:216 msgid "Startup Settings" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:229 msgid "Splash Screen" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:231 msgid "Enable display of the splash screen at application startup." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:243 msgid "Sys Tray Icon" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:245 msgid "Enable display of FlatCAM icon in Sys Tray." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:250 msgid "Show Shell" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:252 msgid "" "Check this box if you want the shell to\n" "start automatically at startup." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:259 msgid "Show Project" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:261 msgid "" "Check this box if you want the project/selected/tool tab area to\n" "to be shown automatically at startup." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:267 msgid "Version Check" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:269 msgid "" "Check this box if you want to check\n" "for a new version automatically at startup." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:276 msgid "Send Statistics" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:278 msgid "" "Check this box if you agree to send anonymous\n" "stats automatically at startup, to help improve FlatCAM." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:287 msgid "Save Settings" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:300 msgid "Save Compressed Project" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:302 msgid "" "Whether to save a compressed or uncompressed project.\n" "When checked it will save a compressed FlatCAM project." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:311 msgid "Compression" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:313 msgid "" "The level of compression used when saving\n" "a FlatCAM project. Higher value means better compression\n" "but require more RAM usage and more processing time." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:324 msgid "Enable Auto Save" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:326 msgid "" "Check to enable the autosave feature.\n" "When enabled, the application will try to save a project\n" "at the set interval." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:336 msgid "Interval" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:338 msgid "" "Time interval for autosaving. In milliseconds.\n" "The application will try to save periodically but only\n" "if the project was saved manually at least once.\n" "While active, some operations may block this feature." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:349 msgid "Text to PDF parameters" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:351 msgid "Used when saving text in Code Editor or in FlatCAM Document objects." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:369 msgid "Top Margin" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:371 msgid "Distance between text body and the top of the PDF file." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:382 msgid "Bottom Margin" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:384 msgid "Distance between text body and the bottom of the PDF file." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:395 msgid "Left Margin" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:397 msgid "Distance between text body and the left of the PDF file." msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:408 msgid "Right Margin" msgstr "" #: appGUI/preferences/general/GeneralAppPrefGroupUI.py:410 msgid "Distance between text body and the right of the PDF file." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:21 msgid "GUI Preferences" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:38 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:286 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:318 msgid "Theme" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:40 msgid "" "Select a theme for the application.\n" "It will theme the plot area." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:46 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:132 #: appPlugins/ToolFiducials.py:1154 appPlugins/ToolMarkers.py:1457 msgid "Auto" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:47 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:286 msgid "Light" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:48 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:318 msgid "Dark" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:51 msgid "" "The theme can be:\n" "Default: Default theme\n" "Auto: Matches mode from OS\n" "Light: Light mode\n" "Dark: Dark mode" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:59 msgid "Dark Canvas" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:61 msgid "" "Check this box to force the use of dark canvas\n" "even if a dark theme is not selected." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:83 msgid "Layout" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:85 msgid "" "Select a layout for the application.\n" "It is applied immediately." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:105 msgid "Style" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:107 msgid "" "Select a style for the application.\n" "It will be applied at the next app start." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:122 msgid "Hover Shape" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:124 msgid "" "Enable display of a hover shape for the application objects.\n" "It is displayed whenever the mouse cursor is hovering\n" "over any kind of not-selected object." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:131 msgid "Selection Shape" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:133 msgid "" "Enable the display of a selection shape for the application objects.\n" "It is displayed whenever the mouse selects an object\n" "either by clicking or dragging mouse from left to right or\n" "right to left." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:141 msgid "GUI Layout" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:143 msgid "" "Select a GUI layout for the Preferences.\n" "Can be:\n" "'Normal' -> a normal and compact layout.\n" "'Columnar' -> a layout the auto-adjust such\n" "that columns are preferentially showed in columns" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:150 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:364 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:338 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:302 msgid "Normal" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:150 msgid "Columnar" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:157 appPlugins/ToolImage.py:802 #: appPlugins/ToolImage.py:813 msgid "Colors" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:167 msgid "Left-Right Selection Color" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:172 msgid "Set the line color for the 'left to right' selection box." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:181 msgid "" "Set the fill color for the selection box\n" "in case that the selection is done from left to right.\n" "First 6 digits are the color and the last 2\n" "digits are for alpha (transparency) level." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:194 msgid "Set the fill transparency for the 'left to right' selection box." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:207 msgid "Right-Left Selection Color" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:213 msgid "Set the line color for the 'right to left' selection box." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:223 msgid "" "Set the fill color for the selection box\n" "in case that the selection is done from right to left.\n" "First 6 digits are the color and the last 2\n" "digits are for alpha (transparency) level." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:236 msgid "Set the fill transparency for selection 'right to left' box." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:252 msgid "Editor Color" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:256 msgid "Drawing" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:258 msgid "Set the color for the shape." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:268 msgid "Set the color of the shape when selected." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:280 msgid "Project Items Color" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:290 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:322 msgid "Enabled" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:292 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:324 msgid "Set the color of the items in Project Tab Tree." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:292 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:304 msgid "Light Theme." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:299 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:331 msgid "Disabled" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:302 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:334 msgid "" "Set the color of the items in Project Tab Tree,\n" "for the case when the items are disabled." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:324 #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:336 msgid "Dark Theme." msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:347 msgid "Project AutoHide" msgstr "" #: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:349 msgid "" "Check this box if you want the project/selected/tool tab area to\n" "hide automatically when there are no objects loaded and\n" "to show whenever a new object is created." msgstr "" #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:42 #: appPlugins/ToolMilling.py:4908 msgid "Segment X size" msgstr "" #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:44 #: appPlugins/ToolMilling.py:4910 msgid "" "The size of the trace segment on the X axis.\n" "Useful for auto-leveling.\n" "A value of 0 means no segmentation on the X axis." msgstr "" #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:58 #: appPlugins/ToolMilling.py:4925 msgid "Segment Y size" msgstr "" #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:60 #: appPlugins/ToolMilling.py:4927 msgid "" "The size of the trace segment on the Y axis.\n" "Useful for auto-leveling.\n" "A value of 0 means no segmentation on the Y axis." msgstr "" #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:42 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:171 msgid "" "Set the number of selected geometry\n" "items above which the utility geometry\n" "becomes just a selection rectangle.\n" "Increases the performance when moving a\n" "large number of geometric elements." msgstr "" #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:28 msgid "" "The parameters set here are used in the file exported\n" "when using the File -> Export -> Export DXF menu entry." msgstr "" #: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:42 msgid "Autodesk DXF Format used when exporting Geometry as DXF." msgstr "" #: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:40 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:70 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:86 appPlugins/ToolCutOut.py:2424 #: appPlugins/ToolIsolation.py:3649 appPlugins/ToolMilling.py:1959 #: appPlugins/ToolMilling.py:4552 msgid "" "Cutting depth (negative)\n" "below the copper surface." msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:35 msgid "\"Follow\"" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:58 msgid "" "Buffering type:\n" "- None --> best performance, fast file loading but no so good display\n" "- Full --> slow file loading but good visuals. This is the default.\n" "<>: Don't change this unless you know what you are doing !!!" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:63 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:72 #: appObjects/AppObjectTemplate.py:818 appObjects/AppObjectTemplate.py:821 #: appObjects/AppObjectTemplate.py:824 appObjects/AppObjectTemplate.py:854 #: appObjects/AppObjectTemplate.py:861 appObjects/AppObjectTemplate.py:864 #: appPlugins/ToolCopperThieving.py:1725 appPlugins/ToolFiducials.py:1089 #: appPlugins/ToolReport.py:470 appPlugins/ToolReport.py:473 appPlugins/ToolReport.py:476 #: appPlugins/ToolReport.py:506 appPlugins/ToolReport.py:513 appPlugins/ToolReport.py:516 msgid "None" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:69 msgid "Delayed Buffering" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:71 msgid "When checked it will do the buffering in background." msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:78 msgid "" "When checked all the Gerber polygons will be\n" "loaded with simplification having a set tolerance.\n" "<>: Don't change this unless you know what you are doing !!!" msgstr "" #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:86 msgid "Tolerance for polygon simplification." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:31 msgid "A list of Gerber Editor parameters." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:44 msgid "" "Set the number of selected Gerber geometry\n" "items above which the utility geometry\n" "becomes just a selection rectangle.\n" "Increases the performance when moving a\n" "large number of geometric elements." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:57 msgid "New Aperture code" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:70 msgid "New Aperture size" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:72 msgid "Size for the new aperture" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:83 msgid "New Aperture type" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:85 msgid "" "Type for the new aperture.\n" "Can be 'C', 'R' or 'O'." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:107 msgid "Aperture Dimensions" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:109 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:44 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:43 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:45 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:47 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:44 msgid "" "Diameters of the tools, separated by comma.\n" "The value of the diameter has to use the dot decimals separator.\n" "Valid values: 0.3, 1.0" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:121 msgid "Linear Pad Array" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:175 msgid "Circular Pad Array" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:228 msgid "Distance at which to buffer the Gerber element." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:240 msgid "Scale Tool" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:253 msgid "Factor to scale the Gerber element." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:276 msgid "Threshold low" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:278 msgid "Threshold value under which the apertures are not marked." msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:288 msgid "Threshold high" msgstr "" #: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:290 msgid "Threshold value over which the apertures are not marked." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:37 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:43 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:98 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:104 msgid "The units used in the Gerber file." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:52 msgid "" "The number of digits in the whole part of the number\n" "and in the fractional part of the number." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:65 msgid "" "This numbers signify the number of digits in\n" "the whole part of Gerber coordinates." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:81 msgid "" "This numbers signify the number of digits in\n" "the decimal part of Gerber coordinates." msgstr "" #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:94 #: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:104 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:114 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:124 msgid "" "This sets the type of Gerber zeros.\n" "If LZ then Leading Zeros are removed and\n" "Trailing Zeros are kept.\n" "If TZ is checked then Trailing Zeros are removed\n" "and Leading Zeros are kept." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:80 msgid "Default Values" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:82 msgid "" "Those values will be used as fallback values\n" "in case that they are not found in the Gerber file." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:148 msgid "Clean Apertures" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:150 msgid "" "Will remove apertures that do not have geometry\n" "thus lowering the number of apertures in the Gerber object." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:156 msgid "Polarity change buffer" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:158 msgid "" "Will apply extra buffering for the\n" "solid geometry when we have polarity changes.\n" "May help loading Gerber files that otherwise\n" "do not load correctly." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:166 msgid "Plot on Select" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:168 msgid "When active, selecting an object in the Project tab will replot it above the others." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:176 msgid "Layers" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:187 msgid "Store colors" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:189 msgid "" "It will store the set colors for Gerber objects.\n" "Those will be used each time the application is started." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:196 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:354 msgid "Color manager" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:199 msgid "Manage colors associated with Gerber objects." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:208 msgid "Reset the colors associated with Gerber objects." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:236 msgid "" "If checked, the polygon outline will be plotted on canvas.\n" "Plotting the outline require more processing power but looks nicer." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:329 msgid "Stored colors for Gerber objects are deleted." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:376 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:380 msgid "Color" msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:391 msgid "Add a new layer." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:399 msgid "Delete the last layers." msgstr "" #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:446 #: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:507 appMain.py:9209 appMain.py:9258 #: appMain.py:9267 appObjects/AppObject.py:323 msgid "Layer" msgstr "" #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:62 #: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:93 msgid "Rounded Geo" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:21 msgid "Copper Thieving Plugin" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:30 msgid "" "A tool to generate a Copper Thieving that can be added\n" "to a selected Gerber file." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:45 msgid "Number of steps (lines) used to interpolate circles." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:55 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:326 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:268 #: appPlugins/ToolCopperThieving.py:1303 appPlugins/ToolCopperThieving.py:1678 #: appPlugins/ToolExtract.py:1340 msgid "Clearance" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:57 msgid "" "This set the distance between the copper Thieving components\n" "(the polygon fill may be split in multiple polygons)\n" "and the copper traces in the Gerber file." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:85 #: appPlugins/ToolCopperThieving.py:1334 msgid "Thieving areas with area less then this value will not be added." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:97 #: appPlugins/ToolCopperThieving.py:1355 msgid "Reference:" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:99 #: appPlugins/ToolCopperThieving.py:1357 msgid "" "- 'Itself' - the copper thieving extent is based on the object extent.\n" "- 'Area Selection' - left mouse click to start selection of the area to be filled.\n" "- 'Reference Object' - will do copper thieving within the area specified by another " "object." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:308 appPlugins/ToolCopperThieving.py:1362 #: appPlugins/ToolNCC.py:4525 msgid "Itself" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:323 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:308 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279 #: appPlugins/ToolCopperThieving.py:1362 appPlugins/ToolFollow.py:728 #: appPlugins/ToolIsolation.py:3887 appPlugins/ToolNCC.py:4525 appPlugins/ToolPaint.py:3288 msgid "Area Selection" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:323 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:308 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279 #: appPlugins/ToolCopperThieving.py:1362 appPlugins/ToolIsolation.py:3887 #: appPlugins/ToolNCC.py:4525 appPlugins/ToolPaint.py:3288 msgid "Reference Object" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:111 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:67 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:201 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:67 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:198 #: appPlugins/ToolCopperThieving.py:1400 appPlugins/ToolCutOut.py:407 #: appPlugins/ToolExtract.py:1081 appPlugins/ToolExtract.py:1231 #: appPlugins/ToolPunchGerber.py:2093 appPlugins/ToolPunchGerber.py:2264 msgid "Rectangular" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:112 #: appPlugins/ToolCopperThieving.py:1401 msgid "Minimal" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:114 #: appPlugins/ToolCopperThieving.py:1394 appPlugins/ToolFilm.py:1302 #: appPlugins/ToolPanelize.py:1234 msgid "Box Type" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:116 #: appPlugins/ToolCopperThieving.py:1396 msgid "" "- 'Rectangular' - the bounding box will be of rectangular shape.\n" "- 'Minimal' - the bounding box will be the convex hull shape." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:130 #: appPlugins/ToolCopperThieving.py:1417 msgid "" "- 'Solid' - copper thieving will be a solid polygon.\n" "- 'Dots Grid' - the empty area will be filled with a pattern of dots.\n" "- 'Squares Grid' - the empty area will be filled with a pattern of squares.\n" "- 'Lines Grid' - the empty area will be filled with a pattern of lines." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137 #: appPlugins/ToolCopperThieving.py:1424 msgid "Dots Grid" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137 #: appPlugins/ToolCopperThieving.py:1424 msgid "Squares Grid" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137 #: appPlugins/ToolCopperThieving.py:1424 msgid "Lines Grid" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:145 #: appPlugins/ToolCopperThieving.py:1445 msgid "Dots Grid Parameters" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:158 #: appPlugins/ToolCopperThieving.py:1451 msgid "Dot diameter in Dots Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:171 #: appPlugins/ToolCopperThieving.py:1464 msgid "Distance between each two dots in Dots Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:184 #: appPlugins/ToolCopperThieving.py:1491 msgid "Squares Grid Parameters" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:197 #: appPlugins/ToolCopperThieving.py:1497 msgid "Square side size in Squares Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:210 #: appPlugins/ToolCopperThieving.py:1510 msgid "Distance between each two squares in Squares Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:223 #: appPlugins/ToolCopperThieving.py:1537 msgid "Lines Grid Parameters" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:236 #: appPlugins/ToolCopperThieving.py:1543 msgid "Line thickness size in Lines Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:249 #: appPlugins/ToolCopperThieving.py:1556 msgid "Distance between each two lines in Lines Grid." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:262 #: appPlugins/ToolCopperThieving.py:1580 msgid "Robber Bar Parameters" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:264 #: appPlugins/ToolCopperThieving.py:1582 msgid "" "Parameters used for the robber bar.\n" "Robber bar = copper border to help in pattern hole plating." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:279 #: appPlugins/ToolCopperThieving.py:1602 msgid "Bounding box margin for robber bar." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:290 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:311 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:54 #: appPlugins/ToolCopperThieving.py:1613 appPlugins/ToolExtract.py:1395 #: appPlugins/ToolMarkers.py:1308 msgid "Thickness" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:292 #: appPlugins/ToolCopperThieving.py:1615 msgid "The robber bar thickness." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:305 #: appPlugins/ToolCopperThieving.py:1641 msgid "Pattern Plating Mask" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:307 #: appPlugins/ToolCopperThieving.py:1643 msgid "Generate a mask for pattern plating." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:319 #: appPlugins/ToolCopperThieving.py:1671 msgid "Only Pads" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:321 #: appPlugins/ToolCopperThieving.py:1673 msgid "Select only pads in case the selected object is a copper Gerber." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:328 #: appPlugins/ToolCopperThieving.py:1680 msgid "" "The distance between the possible copper thieving elements\n" "and/or robber bar and the actual openings in the mask." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:342 #: appPlugins/ToolCopperThieving.py:1716 msgid "Choose which additional geometry to include, if available." msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:168 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:589 #: appPlugins/ToolCopperThieving.py:1725 appPlugins/ToolFilm.py:1491 #: appPlugins/ToolMilling.py:4294 msgid "Both" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345 #: appPlugins/ToolCopperThieving.py:532 appPlugins/ToolCopperThieving.py:536 #: appPlugins/ToolCopperThieving.py:598 appPlugins/ToolCopperThieving.py:1292 #: appPlugins/ToolCopperThieving.py:1725 msgid "Thieving" msgstr "" #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345 #: appPlugins/ToolCopperThieving.py:1725 msgid "Robber bar" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:20 msgid "Extract Drills Options" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:27 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:27 #: appPlugins/ToolExtract.py:1024 appPlugins/ToolPunchGerber.py:2040 msgid "Processed Pads Type" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:29 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:29 #: appPlugins/ToolExtract.py:1026 appPlugins/ToolPunchGerber.py:2042 msgid "" "The type of pads shape to be processed.\n" "If the PCB has many SMD pads with rectangular pads,\n" "disable the Rectangular aperture." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:45 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:45 #: appPlugins/ToolExtract.py:1059 appPlugins/ToolPunchGerber.py:2071 msgid "Process Circular Pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:51 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:175 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:51 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:172 #: appPlugins/ToolExtract.py:1065 appPlugins/ToolExtract.py:1205 #: appPlugins/ToolPunchGerber.py:2077 appPlugins/ToolPunchGerber.py:2238 msgid "Oblong" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:53 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:53 #: appPlugins/ToolExtract.py:1067 appPlugins/ToolPunchGerber.py:2079 msgid "Process Oblong Pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:61 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:61 #: appPlugins/ToolExtract.py:1075 appPlugins/ToolPunchGerber.py:2087 msgid "Process Square Pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:69 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:69 #: appPlugins/ToolExtract.py:1083 appPlugins/ToolPunchGerber.py:2095 msgid "Process Rectangular Pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:75 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:214 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:75 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:211 #: appObjects/AppObjectTemplate.py:562 appPlugins/ToolExtract.py:1089 #: appPlugins/ToolExtract.py:1244 appPlugins/ToolPunchGerber.py:2101 #: appPlugins/ToolPunchGerber.py:2277 appPlugins/ToolReport.py:187 msgid "Others" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:77 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:77 #: appPlugins/ToolExtract.py:1091 appPlugins/ToolPunchGerber.py:2103 msgid "Process pads not in the categories above." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:98 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:122 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:99 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:119 #: appPlugins/ToolExtract.py:1152 appPlugins/ToolExtract.py:1268 #: appPlugins/ToolPunchGerber.py:2156 appPlugins/ToolPunchGerber.py:2184 msgid "Fixed Diameter" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:99 #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:147 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:100 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:144 #: appPlugins/ToolExtract.py:1154 appPlugins/ToolExtract.py:1183 #: appPlugins/ToolPunchGerber.py:2158 appPlugins/ToolPunchGerber.py:2212 msgid "Fixed Annular Ring" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:100 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:101 #: appPlugins/ToolExtract.py:1153 appPlugins/ToolPunchGerber.py:2157 msgid "Proportional" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:106 appPlugins/ToolExtract.py:1143 msgid "" "The method for processing pads. Can be:\n" "- Fixed Diameter -> all holes will have a set size\n" "- Fixed Annular Ring -> all holes will have a set annular ring\n" "- Proportional -> each hole size will be a fraction of the pad size" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:138 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:135 #: appPlugins/ToolExtract.py:1278 appPlugins/ToolPunchGerber.py:2194 msgid "Fixed hole diameter." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:149 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:146 #: appPlugins/ToolExtract.py:1185 appPlugins/ToolPunchGerber.py:2214 msgid "" "The size of annular ring.\n" "The copper sliver between the hole exterior\n" "and the margin of the copper pad." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:164 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:161 #: appPlugins/ToolExtract.py:1194 appPlugins/ToolPunchGerber.py:2227 msgid "The size of annular ring for circular pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:177 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:174 #: appPlugins/ToolExtract.py:1207 appPlugins/ToolPunchGerber.py:2240 msgid "The size of annular ring for oblong pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:190 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:187 #: appPlugins/ToolExtract.py:1220 appPlugins/ToolPunchGerber.py:2253 msgid "The size of annular ring for square pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:203 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:200 #: appPlugins/ToolExtract.py:1233 appPlugins/ToolPunchGerber.py:2266 msgid "The size of annular ring for rectangular pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:216 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:213 #: appPlugins/ToolExtract.py:1246 appPlugins/ToolPunchGerber.py:2279 msgid "The size of annular ring for other pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:229 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:226 #: appPlugins/ToolExtract.py:1296 appPlugins/ToolPunchGerber.py:2291 msgid "Proportional Diameter" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:244 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:241 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:63 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:123 appPlugins/ToolFilm.py:1356 #: appPlugins/ToolFilm.py:1427 msgid "Factor" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:246 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:243 #: appPlugins/ToolExtract.py:1307 appPlugins/ToolPunchGerber.py:2302 msgid "" "Proportional Diameter.\n" "The hole diameter will be a fraction of the pad size." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:256 appPlugins/ToolExtract.py:1328 #: appPlugins/ToolExtract.py:1356 msgid "Extract Soldermask" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:258 appPlugins/ToolExtract.py:1330 #: appPlugins/ToolExtract.py:1359 msgid "Extract soldermask from a given Gerber file." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:270 appPlugins/ToolExtract.py:1342 msgid "" "This set how much the soldermask extends\n" "beyond the margin of the pads." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:284 appPlugins/ToolExtract.py:1368 #: appPlugins/ToolExtract.py:1413 msgid "Extract Cutout" msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:286 appPlugins/ToolExtract.py:1370 #: appPlugins/ToolExtract.py:1416 msgid "Extract a cutout from a given Gerber file." msgstr "" #: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:313 appPlugins/ToolExtract.py:1397 msgid "The thickness of the line that makes the cutout geometry." msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:20 msgid "Fiducials Plugin" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:29 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:29 #: appPlugins/ToolCopperThieving.py:1293 appPlugins/ToolEtchCompensation.py:386 #: appPlugins/ToolFiducials.py:1046 appPlugins/ToolMarkers.py:1284 #: appPlugins/ToolObjectDistance.py:449 appPlugins/ToolOptimal.py:505 #: appPlugins/ToolSolderPaste.py:1349 msgid "Parameters used for this tool." msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:42 #: appPlugins/ToolFiducials.py:1059 msgid "" "This set the fiducial diameter if fiducial type is circular,\n" "otherwise is the size of the fiducial.\n" "The soldermask opening is double than that." msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:70 #: appPlugins/ToolFiducials.py:1087 msgid "Up" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:71 #: appPlugins/ToolFiducials.py:1088 msgid "Down" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74 #: appPlugins/ToolFiducials.py:1091 msgid "Second fiducial" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:76 #: appPlugins/ToolFiducials.py:1093 msgid "" "The position for the second fiducial.\n" "- 'Up' - the order is: bottom-left, top-left, top-right.\n" "- 'Down' - the order is: bottom-left, bottom-right, top-right.\n" "- 'None' - there is no second fiducial. The order is: bottom-left, top-right." msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:90 #: appPlugins/ToolFiducials.py:1107 msgid "Fiducial Type" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:92 #: appPlugins/ToolFiducials.py:1109 msgid "" "The type of fiducial.\n" "- 'Circular' - this is the regular fiducial.\n" "- 'Cross' - cross lines fiducial.\n" "- 'Chess' - chess pattern fiducial." msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:99 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:47 appPlugins/ToolFiducials.py:1116 #: appPlugins/ToolMarkers.py:1301 msgid "Cross" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:99 #: appPlugins/ToolFiducials.py:1116 msgid "Chess" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:105 #: appPlugins/ToolFiducials.py:1122 msgid "Line thickness" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:133 #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:67 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:48 appPlugins/ToolCutOut.py:2577 #: appPlugins/ToolDblSided.py:1050 appPlugins/ToolFiducials.py:1155 #: appPlugins/ToolLevelling.py:1897 appPlugins/ToolMarkers.py:1457 #: appPlugins/ToolPunchGerber.py:2333 msgid "Manual" msgstr "" #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:137 #: appPlugins/ToolFiducials.py:1159 msgid "" "- 'Auto' - automatic placement of fiducials in the corners of the bounding box.\n" "- 'Manual' - manual placement of fiducials." msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:20 msgid "Invert Gerber Plugin" msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:29 msgid "" "A tool to invert Gerber geometry from positive to negative\n" "and in revers." msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:43 appPlugins/ToolInvertGerber.py:251 msgid "" "Distance by which to avoid\n" "the edges of the Gerber object." msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:57 appPlugins/ToolInvertGerber.py:262 msgid "Lines Join Style" msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:59 appPlugins/ToolInvertGerber.py:264 msgid "" "The way that the lines in the object outline will be joined.\n" "Can be:\n" "- rounded -> an arc is added between two joining lines\n" "- square -> the lines meet in 90 degrees angle\n" "- bevel -> the lines are joined by a third line" msgstr "" #: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:78 appPlugins/ToolInvertGerber.py:273 msgid "Bevel" msgstr "" #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:20 msgid "Optimal Plugin" msgstr "" #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:29 msgid "" "A tool to find the minimum distance between\n" "every two Gerber geometric elements" msgstr "" #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:45 appPlugins/ToolOptimal.py:515 msgid "Precision" msgstr "" #: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:47 msgid "Number of decimals for the distances and coordinates in this tool." msgstr "" #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:20 msgid "Punch Gerber Options" msgstr "" #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:107 #: appPlugins/ToolPunchGerber.py:2138 msgid "" "The punch hole source can be:\n" "- Excellon Object-> the Excellon object drills center will serve as reference.\n" "- Fixed Diameter -> will try to use the pads center as reference adding fixed diameter " "holes.\n" "- Fixed Annular Ring -> will try to keep a set annular ring.\n" "- Proportional -> will make a Gerber punch hole having the diameter a percentage of the " "pad diameter." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:20 msgid "QRCode Plugin" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:29 msgid "" "A tool to create a QRCode that can be inserted\n" "into a selected Gerber file, or it can be exported as a file." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:42 appMain.py:8655 #: appPlugins/ToolQRCode.py:808 msgid "Version" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:44 appPlugins/ToolQRCode.py:810 msgid "" "QRCode version can have values from 1 (21x21 boxes)\n" "to 40 (177x177 boxes)." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:55 appPlugins/ToolQRCode.py:821 msgid "Error correction" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:57 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:68 appPlugins/ToolQRCode.py:823 #: appPlugins/ToolQRCode.py:834 #, python-format msgid "" "Parameter that controls the error correction used for the QR Code.\n" "L = maximum 7%% errors can be corrected\n" "M = maximum 15%% errors can be corrected\n" "Q = maximum 25%% errors can be corrected\n" "H = maximum 30%% errors can be corrected." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:78 appPlugins/ToolQRCode.py:844 msgid "Box Size" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:80 appPlugins/ToolQRCode.py:846 msgid "" "Box size control the overall size of the QRcode\n" "by adjusting the size of each box in the code." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:91 appPlugins/ToolQRCode.py:857 msgid "Border Size" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:93 appPlugins/ToolQRCode.py:859 msgid "" "Size of the QRCode border. How many boxes thick is the border.\n" "Default value is 4. The width of the clearance around the QRCode." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:104 appPlugins/ToolQRCode.py:766 msgid "QRCode Data" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:106 appPlugins/ToolQRCode.py:768 msgid "QRCode Data. Alphanumeric text to be encoded in the QRCode." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:110 appPlugins/ToolQRCode.py:782 msgid "Add here the text to be included in the QRCode..." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:116 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:222 appPlugins/ToolFilm.py:1561 #: appPlugins/ToolQRCode.py:870 msgid "Polarity" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:118 appPlugins/ToolQRCode.py:872 msgid "" "Choose the polarity of the QRCode.\n" "It can be drawn in a negative way (squares are clear)\n" "or in a positive way (squares are opaque)." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:122 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:221 appPlugins/ToolFilm.py:1559 #: appPlugins/ToolQRCode.py:876 msgid "Negative" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:123 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:220 appPlugins/ToolFilm.py:1558 #: appPlugins/ToolQRCode.py:877 msgid "Positive" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:125 appPlugins/ToolQRCode.py:879 msgid "" "Choose the type of QRCode to be created.\n" "If added on a Silkscreen Gerber file the QRCode may\n" "be added as positive. If it is added to a Copper Gerber\n" "file then perhaps the QRCode can be added as negative." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:136 #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:142 appPlugins/ToolQRCode.py:890 #: appPlugins/ToolQRCode.py:896 msgid "" "The bounding box, meaning the empty space that surrounds\n" "the QRCode geometry, can have a rounded or a square shape." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:149 appPlugins/ToolQRCode.py:924 msgid "Fill Color" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:151 appPlugins/ToolQRCode.py:926 msgid "Set the QRCode fill color (squares color)." msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:159 appPlugins/ToolQRCode.py:948 msgid "Back Color" msgstr "" #: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:161 appPlugins/ToolQRCode.py:950 msgid "Set the QRCode background color." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:20 msgid "Check Rules Plugin" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:22 msgid "" "A tool to check if Gerber files are within a set\n" "of Manufacturing Rules." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:31 #: appPlugins/ToolRulesCheck.py:1202 appPlugins/ToolRulesCheck.py:1248 #: appPlugins/ToolRulesCheck.py:1314 appPlugins/ToolRulesCheck.py:1456 msgid "Copper" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:31 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:130 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:208 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:243 #: appPlugins/ToolRulesCheck.py:1202 appPlugins/ToolRulesCheck.py:1209 #: appPlugins/ToolRulesCheck.py:1216 appPlugins/ToolRulesCheck.py:1223 #: appPlugins/ToolRulesCheck.py:1456 appPlugins/ToolRulesCheck.py:1566 #: appPlugins/ToolRulesCheck.py:1653 appPlugins/ToolRulesCheck.py:1691 msgid "Rules" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:41 #: appPlugins/ToolRulesCheck.py:444 appPlugins/ToolRulesCheck.py:1466 msgid "Trace Size" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:43 #: appPlugins/ToolRulesCheck.py:1468 msgid "This checks if the minimum size for traces is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:50 #: appPlugins/ToolRulesCheck.py:1475 msgid "Minimum acceptable trace size." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:62 #: appPlugins/ToolRulesCheck.py:676 appPlugins/ToolRulesCheck.py:706 #: appPlugins/ToolRulesCheck.py:1489 msgid "Copper to Copper clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:64 #: appPlugins/ToolRulesCheck.py:1491 msgid "" "This checks if the minimum clearance between copper\n" "features is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:72 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:94 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:150 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:172 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:194 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:229 #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:263 #: appPlugins/ToolRulesCheck.py:1499 appPlugins/ToolRulesCheck.py:1524 #: appPlugins/ToolRulesCheck.py:1586 appPlugins/ToolRulesCheck.py:1611 #: appPlugins/ToolRulesCheck.py:1636 appPlugins/ToolRulesCheck.py:1674 #: appPlugins/ToolRulesCheck.py:1711 msgid "Minimum acceptable clearance value." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:84 #: appPlugins/ToolRulesCheck.py:736 appPlugins/ToolRulesCheck.py:742 #: appPlugins/ToolRulesCheck.py:755 appPlugins/ToolRulesCheck.py:762 #: appPlugins/ToolRulesCheck.py:1514 msgid "Copper to Outline clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:86 #: appPlugins/ToolRulesCheck.py:1516 msgid "" "This checks if the minimum clearance between copper\n" "features and the outline is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:106 #: appPlugins/ToolRulesCheck.py:1002 appPlugins/ToolRulesCheck.py:1008 #: appPlugins/ToolRulesCheck.py:1024 appPlugins/ToolRulesCheck.py:1031 #: appPlugins/ToolRulesCheck.py:1539 msgid "Minimum Annular Ring" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:108 #: appPlugins/ToolRulesCheck.py:1541 msgid "" "This checks if the minimum copper ring left by drilling\n" "a hole into a pad is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:116 #: appPlugins/ToolRulesCheck.py:1549 msgid "Minimum acceptable ring value." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:130 #: appPlugins/ToolRulesCheck.py:1209 appPlugins/ToolRulesCheck.py:1284 #: appPlugins/ToolRulesCheck.py:1350 appPlugins/ToolRulesCheck.py:1566 msgid "Silk" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:140 #: appPlugins/ToolRulesCheck.py:1576 msgid "Silk to Silk Clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:142 #: appPlugins/ToolRulesCheck.py:1578 msgid "" "This checks if the minimum clearance between silkscreen\n" "features and silkscreen features is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:162 #: appPlugins/ToolRulesCheck.py:845 appPlugins/ToolRulesCheck.py:851 #: appPlugins/ToolRulesCheck.py:869 appPlugins/ToolRulesCheck.py:1601 msgid "Silk to Solder Mask Clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:164 #: appPlugins/ToolRulesCheck.py:1603 msgid "" "This checks if the minimum clearance between silkscreen\n" "features and soldermask features is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:184 #: appPlugins/ToolRulesCheck.py:899 appPlugins/ToolRulesCheck.py:905 #: appPlugins/ToolRulesCheck.py:919 appPlugins/ToolRulesCheck.py:926 #: appPlugins/ToolRulesCheck.py:1626 msgid "Silk to Outline Clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:186 #: appPlugins/ToolRulesCheck.py:1628 msgid "" "This checks if the minimum clearance between silk\n" "features and the outline is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:208 #: appPlugins/ToolRulesCheck.py:1216 appPlugins/ToolRulesCheck.py:1653 msgid "Soldermask" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:218 #: appPlugins/ToolRulesCheck.py:937 appPlugins/ToolRulesCheck.py:964 #: appPlugins/ToolRulesCheck.py:1663 msgid "Minimum Solder Mask Sliver" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:220 #: appPlugins/ToolRulesCheck.py:1665 msgid "" "This checks if the minimum clearance between soldermask\n" "features and soldermask features is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:243 #: appPlugins/ToolRulesCheck.py:1223 appPlugins/ToolRulesCheck.py:1691 msgid "Holes" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:253 #: appPlugins/ToolRulesCheck.py:388 appPlugins/ToolRulesCheck.py:1701 msgid "Hole to Hole Clearance" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:255 #: appPlugins/ToolRulesCheck.py:1703 msgid "" "This checks if the minimum clearance between a drill hole\n" "and another drill hole is met." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:275 #: appPlugins/ToolRulesCheck.py:362 appPlugins/ToolRulesCheck.py:1726 msgid "Hole Size" msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:277 #: appPlugins/ToolRulesCheck.py:1728 msgid "" "This checks if the drill holes\n" "sizes are above the threshold." msgstr "" #: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:285 #: appPlugins/ToolRulesCheck.py:1736 msgid "Minimum acceptable drill size." msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:20 msgid "2-Sided Plugin" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:25 appPlugins/ToolDblSided.py:1008 msgid "PCB Alignment" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:27 msgid "" "A tool to help in creating a double sided\n" "PCB using alignment holes." msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:47 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:282 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:81 appPlugins/ToolCutOut.py:2750 #: appPlugins/ToolDblSided.py:1023 appPlugins/ToolMarkers.py:1503 msgid "Drill Dia" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:49 appPlugins/ToolDblSided.py:1025 #: appPlugins/ToolDblSided.py:1030 msgid "Diameter of the drill for the alignment holes." msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:58 appPlugins/ToolDblSided.py:1041 msgid "" "The content of the Excellon file.\n" "X - Pairs of drill holes mirrored vertically from reference point\n" "Y - Pairs of drill holes mirrored horizontally from reference point\n" "Manual - no mirroring; drill holes in place" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:78 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:170 msgid "Mirror Axis" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:80 appPlugins/ToolDblSided.py:856 msgid "Mirror vertically (X) or horizontally (Y)." msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:92 appPlugins/ToolDblSided.py:844 msgid "Mirror Operation" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:108 appPlugins/ToolDblSided.py:886 msgid "Box" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:109 appMain.py:8664 #: appPlugins/ToolDblSided.py:887 msgid "Snap" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:112 msgid "Axis Ref" msgstr "" #: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:114 appPlugins/ToolDblSided.py:876 msgid "" "The coordinates used as reference for the mirror operation.\n" "Can be:\n" "- Point -> a set of coordinates (x,y) around which the object is mirrored\n" "- Box -> a set of coordinates (x, y) obtained from the center of the\n" "bounding box of another object selected below\n" "- Snap -> a point defined by the center of a drill hole in a Excellon object" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:20 msgid "Calculators Plugin" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:27 msgid "V-Shape Tool Calculator" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:29 msgid "" "Calculate the tool diameter for a given V-shape tool,\n" "having the tip diameter, tip angle and\n" "depth-of-cut as parameters." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:47 #: appPlugins/ToolCalculators.py:599 msgid "Tip Diameter" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:49 #: appPlugins/ToolCalculators.py:601 msgid "" "This is the tool tip diameter.\n" "It is specified by manufacturer." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:61 #: appPlugins/ToolCalculators.py:614 msgid "Tip Angle" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:63 msgid "" "This is the angle on the tip of the tool.\n" "It is specified by manufacturer." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:77 msgid "" "This is depth to cut into material.\n" "In the CNCJob object it is the CutZ parameter." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:86 msgid "ElectroPlating Calculator" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:88 #: appPlugins/ToolCalculators.py:662 msgid "" "This calculator is useful for those who plate the via/pad/drill holes,\n" "using a method like graphite ink or calcium hypophosphite ink or palladium chloride." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:105 #: appPlugins/ToolCalculators.py:691 msgid "Board Length" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:107 msgid "This is the board length. In centimeters." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:117 #: appPlugins/ToolCalculators.py:710 appPlugins/ToolCalculators.py:711 msgid "Board Width" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:119 msgid "This is the board width.In centimeters." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:125 msgid "This is the board area." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:135 #: appPlugins/ToolCalculators.py:753 msgid "Current Density" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:141 msgid "" "Current density to pass through the board. \n" "In Amps per Square Feet ASF." msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:147 #: appPlugins/ToolCalculators.py:774 msgid "Copper Growth" msgstr "" #: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:153 msgid "" "How thick the copper growth is intended to be.\n" "In microns." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:21 msgid "Cutout Plugin" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:28 msgid "" "Create toolpaths to cut around\n" "the PCB and separate it from\n" "the original board." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:46 appPlugins/ToolCutOut.py:2355 msgid "" "Diameter of the tool used to cutout\n" "the PCB shape out of the surrounding material." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:84 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:70 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:100 appPlugins/ToolCutOut.py:2437 #: appPlugins/ToolDrilling.py:2531 appPlugins/ToolMilling.py:4567 msgid "Multi-Depth" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:107 appPlugins/ToolCutOut.py:2296 msgid "Kind" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:109 appPlugins/ToolCutOut.py:2298 msgid "" "Choice of what kind the object we want to cutout is.\n" "- Single: contain a single PCB Gerber outline object.\n" "- Panel: a panel PCB Gerber object, which is made\n" "out of many individual PCB outlines." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:176 appPlugins/ToolCutOut.py:2519 msgid "Mouse Bytes" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:236 msgid "" "Number of gaps used for the cutout.\n" "There can be maximum 8 bridges/gaps.\n" "The choices are:\n" "- None - no gaps\n" "- lr - left + right\n" "- tb - top + bottom\n" "- 4 - left + right +top + bottom\n" "- 2lr - 2*left + 2*right\n" "- 2tb - 2*top + 2*bottom\n" "- 8 - 2*left + 2*right +2*top + 2*bottom" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:257 appPlugins/ToolCutOut.py:2642 #: appPlugins/ToolDistance.py:855 appPlugins/ToolFiducials.py:1166 #: appPlugins/ToolMarkers.py:1462 msgid "Big cursor" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:259 appPlugins/ToolCutOut.py:2644 msgid "Use a big cursor when adding manual gaps." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:263 appPlugins/ToolCutOut.py:2714 #: appPlugins/ToolCutOut.py:2788 msgid "Cut by Drilling" msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:264 appPlugins/ToolCutOut.py:2715 #: appPlugins/ToolCutOut.py:2791 msgid "Create a series of drill holes following a geometry line." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:284 appPlugins/ToolCutOut.py:2752 msgid "" "Diameter of the tool used to cutout\n" "the PCB by drilling." msgstr "" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:297 appPlugins/ToolCutOut.py:2765 msgid "" "Distance between the center of\n" "two neighboring drill holes." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:21 msgid "Drilling Plugin" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:30 appPlugins/ToolDrilling.py:2375 msgid "Create CNCJob with toolpaths for drilling or milling holes." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:41 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:55 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:56 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:58 appPlugins/ToolDrilling.py:2460 #: appPlugins/ToolIsolation.py:3448 appPlugins/ToolMilling.py:4120 #: appPlugins/ToolNCC.py:4153 appPlugins/ToolPaint.py:3035 msgid "Tool order" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:42 appPlugins/ToolDrilling.py:2461 #: appPlugins/ToolMilling.py:4121 msgid "" "This set the way that the tools in the tools table are used.\n" "'Default' --> the order from the file\n" "'Forward' --> tools will be ordered from small to big\n" "'Reverse' --> tools will ordered from big to small." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:48 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:65 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:67 appPlugins/ToolDrilling.py:2467 #: appPlugins/ToolIsolation.py:3457 appPlugins/ToolMilling.py:4127 #: appPlugins/ToolNCC.py:4165 appPlugins/ToolPaint.py:3044 #: appPlugins/ToolSolderPaste.py:1544 msgid "Forward" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:48 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:65 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:67 appPlugins/ToolDrilling.py:2467 #: appPlugins/ToolIsolation.py:3457 appPlugins/ToolMilling.py:4127 #: appPlugins/ToolNCC.py:4165 appPlugins/ToolPaint.py:3044 #: appPlugins/ToolSolderPaste.py:1582 msgid "Reverse" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:142 appPlugins/ToolSolderPaste.py:1442 msgid "Tool change" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:109 appPlugins/ToolDrilling.py:2755 #: appPlugins/ToolMilling.py:4781 msgid "" "Include tool-change sequence\n" "in G-Code (Pause for tool change)." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:115 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:152 msgid "Toolchange Z" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:117 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:155 appPlugins/ToolDrilling.py:2763 #: appPlugins/ToolMilling.py:4789 msgid "" "Z-axis position (height) for\n" "tool change." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:129 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:170 appPlugins/ToolDrilling.py:2806 #: appPlugins/ToolMilling.py:4819 msgid "End move Z" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:131 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:172 appPlugins/ToolDrilling.py:2808 #: appPlugins/ToolMilling.py:4821 msgid "" "Height of the tool after\n" "the last move at the end of the job." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:142 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:186 appPlugins/ToolDrilling.py:2822 #: appPlugins/ToolMilling.py:4835 msgid "End move X,Y" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:144 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:188 appPlugins/ToolDrilling.py:2824 #: appPlugins/ToolMilling.py:4837 msgid "" "End move X,Y position. In format (x,y).\n" "If no value is entered then there is no move\n" "on X,Y plane at the end of the job." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:169 msgid "Spindle Speed" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:183 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:245 msgid "Enable Dwell" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:185 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:247 appPlugins/ToolDrilling.py:2645 #: appPlugins/ToolMilling.py:4731 msgid "" "Pause to allow the spindle to reach its\n" "speed before cutting." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:193 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:253 appPlugins/ToolDrilling.py:2657 #: appPlugins/ToolMilling.py:4742 msgid "Number of time units for spindle to dwell." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:202 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:266 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:266 #: appPlugins/ToolDrilling.py:2873 appPlugins/ToolMilling.py:4886 #: appPlugins/ToolSolderPaste.py:1632 msgid "Preprocessor" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:204 msgid "" "The preprocessor JSON file that dictates\n" "Gcode output." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:229 msgid "Drilling Slots" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:277 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:294 msgid "A list of advanced parameters." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:301 msgid "Toolchange X,Y" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:303 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:307 appPlugins/ToolDrilling.py:2778 #: appPlugins/ToolMilling.py:4803 msgid "Toolchange X,Y position." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:311 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:315 appPlugins/ToolDrilling.py:2794 msgid "Start Z" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:313 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:317 appPlugins/ToolDrilling.py:2796 msgid "" "Height of the tool just after starting the work.\n" "Delete the value if you don't need this feature." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:338 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:101 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:367 appPlugins/ToolDrilling.py:2836 #: appPlugins/ToolLevelling.py:1860 appPlugins/ToolMilling.py:4849 msgid "Probe Z depth" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:340 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:103 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:369 appPlugins/ToolDrilling.py:2838 #: appPlugins/ToolLevelling.py:1862 appPlugins/ToolMilling.py:4851 msgid "" "The maximum depth that the probe is allowed\n" "to probe. Negative value, in current units." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:351 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:382 appPlugins/ToolDrilling.py:2855 #: appPlugins/ToolMilling.py:4868 msgid "Feedrate Probe" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:353 #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:116 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:384 appPlugins/ToolDrilling.py:2857 #: appPlugins/ToolLevelling.py:1875 appPlugins/ToolMilling.py:4870 msgid "The feedrate used while the probe is probing." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:363 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:396 msgid "Spindle direction" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:365 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:398 msgid "" "This sets the direction that the spindle is rotating.\n" "It can be either:\n" "- CW = clockwise or\n" "- CCW = counter clockwise" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:377 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:410 appPlugins/ToolDrilling.py:2627 #: appPlugins/ToolMilling.py:4713 msgid "Min Power" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:379 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:412 appPlugins/ToolDrilling.py:2629 #: appPlugins/ToolMilling.py:4715 msgid "The laser power when the laser is travelling." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:390 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:423 msgid "Fast Plunge" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:392 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:425 msgid "" "By checking this, the vertical move from\n" "Z_Toolchange to Z_move is done with G0,\n" "meaning the fastest speed available.\n" "WARNING: the move is done at Toolchange X,Y coords." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:400 msgid "Fast Retract" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:402 msgid "" "Exit hole strategy.\n" " - When uncheked, while exiting the drilled hole the drill bit\n" "will travel slow, with set feedrate (G1), up to zero depth and then\n" "travel as fast as possible (G0) to the Z Move (travel height).\n" " - When checked the travel from Z cut (cut depth) to Z_move\n" "(travel height) is done as fast as possible (G0) in one move." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:420 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:440 msgid "Area Exclusion" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:422 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:442 msgid "Area exclusion parameters." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:433 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:453 msgid "Exclusion areas" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:436 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:456 appPlugins/ToolDrilling.py:2893 #: appPlugins/ToolMilling.py:4952 msgid "" "Include exclusion areas.\n" "In those areas the travel of the tools\n" "is forbidden." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:446 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:332 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:466 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:323 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:287 appPlugins/ToolDrilling.py:2964 #: appPlugins/ToolFollow.py:736 appPlugins/ToolIsolation.py:3950 #: appPlugins/ToolMilling.py:5024 appPlugins/ToolNCC.py:4565 appPlugins/ToolPaint.py:3322 msgid "The kind of selection shape used for area selection." msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:456 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:476 appPlugins/ToolDrilling.py:2915 #: appPlugins/ToolDrilling.py:2932 appPlugins/ToolMilling.py:4975 #: appPlugins/ToolMilling.py:4992 msgid "Strategy" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:457 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:477 appPlugins/ToolDrilling.py:2933 #: appPlugins/ToolMilling.py:4993 msgid "" "The strategy followed when encountering an exclusion area.\n" "Can be:\n" "- Over -> when encountering the area, the tool will go to a set height\n" "- Around -> will avoid the exclusion area by going around the area" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:461 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:481 appPlugins/ToolDrilling.py:849 #: appPlugins/ToolDrilling.py:2937 appPlugins/ToolMilling.py:914 #: appPlugins/ToolMilling.py:4997 msgid "Over" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:462 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:482 appPlugins/ToolDrilling.py:849 #: appPlugins/ToolDrilling.py:2938 appPlugins/ToolMilling.py:914 #: appPlugins/ToolMilling.py:4998 msgid "Around" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:468 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:488 appPlugins/ToolDrilling.py:2915 #: appPlugins/ToolDrilling.py:2945 appPlugins/ToolMilling.py:4975 #: appPlugins/ToolMilling.py:5005 msgid "Over Z" msgstr "" #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:469 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:489 appPlugins/ToolDrilling.py:2946 #: appPlugins/ToolMilling.py:5006 msgid "" "The height Z to which the tool will rise in order to avoid\n" "an interdiction area." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:21 msgid "Film Plugin" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:28 appPlugins/ToolFilm.py:1328 msgid "Adjustments" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:30 appPlugins/ToolFilm.py:1330 msgid "Compensate print distortions." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:44 appPlugins/ToolFilm.py:1344 msgid "" "A value greater than 1 will compact the film\n" "while a value less than 1 will jolt it." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:59 appPlugins/ToolFilm.py:1352 msgid "" "'Length' -> scale by a length value\n" "'Factor' -> scale by a ratio" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:91 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:149 appPlugins/ToolFilm.py:1384 #: appPlugins/ToolFilm.py:1455 msgid "The reference point to be used as origin for the adjustment." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96 #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:154 appPlugins/ToolFiducials.py:978 #: appPlugins/ToolFilm.py:1389 appPlugins/ToolFilm.py:1460 appPlugins/ToolMarkers.py:1420 msgid "Bottom Left" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96 appPlugins/ToolFilm.py:1389 #: appPlugins/ToolMarkers.py:1412 msgid "Top Left" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96 appPlugins/ToolFilm.py:1389 #: appPlugins/ToolMarkers.py:1424 msgid "Bottom Right" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96 appPlugins/ToolFilm.py:1389 msgid "Top right" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:102 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:118 appPlugins/ToolFilm.py:1412 msgid "Skew" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:104 appPlugins/ToolFilm.py:1414 msgid "" "Positive values will skew to the right\n" "while negative values will skew to the left." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:118 msgid "" "'Length' -> deform by a length value\n" "'Angle' -> deform by an angle\n" "'Factor' -> deform by a ratio between what should be and what is" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:162 appPlugins/ToolFilm.py:1485 #: appPlugins/ToolFilm.py:1495 msgid "Mirror the film geometry on the selected axis or on both." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:185 msgid "" "Create a PCB film from a Gerber or Geometry object.\n" "The file is saved in SVG format." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:200 appPlugins/ToolFilm.py:1523 msgid "" "Create a convex shape surrounding the entire PCB.\n" "If not checked the shape is rectangular." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:224 appPlugins/ToolFilm.py:1563 msgid "Generate a Positive black film or a Negative film." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:230 msgid "Film Color" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:232 msgid "Set the film color when positive film is selected." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:245 appPlugins/ToolFilm.py:1574 msgid "Border" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:247 appPlugins/ToolFilm.py:1576 msgid "" "Specify a border around the object.\n" "Only for negative film.\n" "It helps if we use as a Box Object the same \n" "object as in Film Object. It will create a thick\n" "black bar around the actual print allowing for a\n" "better delimitation of the outline features which are of\n" "white color like the rest and which may confound with the\n" "surroundings if not for this border." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:265 appPlugins/ToolFilm.py:1548 msgid "Scale Stroke" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:267 appPlugins/ToolFilm.py:1550 msgid "" "Scale the line stroke thickness of each feature in the SVG file.\n" "It means that the line that envelope each SVG feature will be thicker or thinner,\n" "therefore the fine features may be more affected by this parameter." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:274 appPlugins/ToolFilm.py:1668 msgid "SVG" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:275 appPlugins/ToolFilm.py:1669 msgid "PNG" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:276 appPlugins/ToolFilm.py:1670 msgid "PDF" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:279 appPlugins/ToolFilm.py:1659 msgid "Film Type" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:281 appPlugins/ToolFilm.py:1661 msgid "" "The file type of the saved film. Can be:\n" "- 'SVG' -> open-source vectorial format\n" "- 'PNG' -> raster image\n" "- 'PDF' -> portable document format" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:290 appPlugins/ToolFilm.py:1677 msgid "Page Orientation" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:303 appPlugins/ToolFilm.py:1693 msgid "Page Size" msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:304 appPlugins/ToolFilm.py:1694 msgid "A selection of standard ISO 216 page sizes." msgstr "" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:371 appPlugins/ToolFilm.py:1760 msgid "Default value is 96 DPI. Change this value to scale the PNG file." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:20 msgid "Isolation Plugin" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:42 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:41 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:43 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:45 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:42 msgid "Tools Dia" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:49 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:50 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:54 appPlugins/ToolMarkers.py:1473 msgid "Comma separated values" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:56 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:57 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:59 appPlugins/ToolIsolation.py:3449 #: appPlugins/ToolNCC.py:4154 appPlugins/ToolPaint.py:3036 msgid "" "This set the way that the tools in the tools table are used.\n" "'Default' --> means that the used order is the one in the tool table\n" "'Forward' --> means that the tools will be ordered from small to big\n" "'Reverse' --> means that the tools will ordered from big to small\n" "\n" "WARNING: using rest machining will automatically set the order\n" "in reverse and disable this control." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:70 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:53 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:71 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:73 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:80 appPlugins/ToolIsolation.py:3614 #: appPlugins/ToolMilling.py:4512 msgid "V-Tip Dia" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:72 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:56 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:73 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:75 appPlugins/ToolIsolation.py:3617 #: appPlugins/ToolMilling.py:4515 msgid "The tip diameter for V-Shape Tool" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:82 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:68 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:83 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:86 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:94 appPlugins/ToolIsolation.py:3630 #: appPlugins/ToolMilling.py:4528 msgid "V-Tip Angle" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:84 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:71 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:85 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:88 appPlugins/ToolIsolation.py:3633 #: appPlugins/ToolMilling.py:4531 msgid "" "The tip angle for V-Shape Tool.\n" "In degree." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:98 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:107 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:99 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:108 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:102 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:111 msgid "" "Depth of cut into material. Negative value.\n" "In application units." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:117 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:118 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:120 appPlugins/ToolPaint.py:3071 msgid "" "Diameter for the new tool to add in the Tool Table.\n" "If the tool is V-shape type then this value is automatically\n" "calculated from the other parameters." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:138 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:158 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141 msgid "Tool Parameters" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:177 appPlugins/ToolIsolation.py:3684 msgid "Pad Passes" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:179 appPlugins/ToolIsolation.py:3686 msgid "" "Width of the extra isolation gap for pads only,\n" "in number (integer) of tool widths." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:248 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:274 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:231 appPlugins/ToolDrilling.py:2740 #: appPlugins/ToolIsolation.py:3766 appPlugins/ToolMilling.py:4766 #: appPlugins/ToolNCC.py:4440 appPlugins/ToolPaint.py:3237 #: appPlugins/ToolSolderPaste.py:1620 msgid "Common Parameters" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:250 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:276 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:233 appPlugins/ToolDrilling.py:2742 #: appPlugins/ToolFollow.py:710 appPlugins/ToolIsolation.py:3768 #: appPlugins/ToolMilling.py:4768 appPlugins/ToolNCC.py:4442 appPlugins/ToolPaint.py:3238 #: appPlugins/ToolPanelize.py:1328 appPlugins/ToolSolderPaste.py:1622 #: appPlugins/ToolSub.py:804 msgid "Parameters that are common for all tools." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:261 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:287 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:244 appPlugins/ToolIsolation.py:3779 #: appPlugins/ToolNCC.py:4453 appPlugins/ToolPaint.py:3248 msgid "Rest" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:263 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:289 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:246 appPlugins/ToolIsolation.py:3782 #: appPlugins/ToolNCC.py:4457 appPlugins/ToolPaint.py:3251 msgid "" "If checked, use 'rest machining'.\n" "Basically it will process copper outside PCB features,\n" "using the biggest tool and continue with the next tools,\n" "from bigger to smaller, to process the copper features that\n" "could not be processed by previous tool, until there is\n" "nothing left to process or there are no more tools.\n" "\n" "If not checked, use the standard algorithm." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275 appPlugins/ToolIsolation.py:3804 msgid "Combine" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277 appPlugins/ToolIsolation.py:3806 msgid "Combine all passes into one object" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:283 appPlugins/ToolIsolation.py:3839 msgid "Except" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:284 appPlugins/ToolIsolation.py:3840 msgid "" "When the isolation geometry is generated,\n" "by checking this, the area of the object below\n" "will be subtracted from the isolation geometry." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:290 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:349 appPlugins/ToolIsolation.py:3813 #: appPlugins/ToolNCC.py:4578 msgid "Check validity" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:292 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:351 appPlugins/ToolIsolation.py:3815 #: appPlugins/ToolNCC.py:4580 msgid "" "If checked then the tools diameters are verified\n" "if they will provide a complete isolation." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:315 appPlugins/ToolIsolation.py:3879 msgid "" "Isolation scope. Choose what to isolate:\n" "- 'All' -> Isolate all the polygons in the object\n" "- 'Area Selection' -> Isolate polygons within a selection area.\n" "- 'Polygon Selection' -> Isolate a selection of polygons.\n" "- 'Reference Object' - will process the area specified by another object." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:323 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279 appPlugins/ToolIsolation.py:3887 #: appPlugins/ToolPaint.py:3288 msgid "Polygon Selection" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:342 appPlugins/ToolIsolation.py:3915 msgid "Interiors" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:344 appPlugins/ToolIsolation.py:3917 msgid "" "When checked the user can select interiors of a polygon.\n" "(holes in the polygon)." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:349 appPlugins/ToolIsolation.py:3794 msgid "Forced Rest" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:351 appPlugins/ToolIsolation.py:3796 msgid "" "When checked the isolation will be done with the current tool even if\n" "interiors of a polygon (holes in the polygon) could not be isolated.\n" "Works when 'rest machining' is used." msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:365 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:339 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:303 msgid "Progressive" msgstr "" #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:368 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:342 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:307 msgid "" "- 'Normal' - normal plotting, done at the end of the job\n" "- 'Progressive' - each shape is plotted after it is generated" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:20 msgid "Levelling Plugin" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:42 appPlugins/ToolLevelling.py:1891 msgid "" "Choose a mode for height map generation.\n" "- Manual: will pick a selection of probe points by clicking on canvas\n" "- Grid: will automatically generate a grid of probe points" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:49 appMain.py:8659 #: appPlugins/ToolLevelling.py:1898 msgid "Grid" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:56 appPlugins/ToolLevelling.py:1905 msgid "" "Choose a method for approximation of heights from autolevelling data.\n" "- Voronoi: will generate a Voronoi diagram\n" "- Bilinear: will use bilinear interpolation. Usable only for grid mode." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:62 appPlugins/ToolLevelling.py:1911 msgid "Voronoi" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:63 appPlugins/ToolLevelling.py:1912 msgid "Bilinear" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:73 appPlugins/ToolLevelling.py:1927 msgid "The number of grid columns." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:83 appPlugins/ToolLevelling.py:1938 msgid "The number of grid rows." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:89 appPlugins/ToolLevelling.py:1848 msgid "Probe Z travel" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:91 appPlugins/ToolLevelling.py:1850 msgid "The safe Z for probe travelling between probe points." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:114 appPlugins/ToolLevelling.py:1873 msgid "Probe Feedrate" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:130 appPlugins/ToolLevelling.py:1949 msgid "Controller" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:132 appPlugins/ToolLevelling.py:1951 msgid "" "The kind of controller for which to generate\n" "height map gcode." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:142 appPlugins/ToolLevelling.py:2178 msgid "Step" msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:144 appPlugins/ToolLevelling.py:2180 msgid "Each jog action will move the axes with this value." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:157 appPlugins/ToolLevelling.py:2194 msgid "Feedrate when jogging." msgstr "" #: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:170 msgid "Safe height (Z) distance when jogging to origin." msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:20 msgid "Markers Options" msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:42 #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:96 appPlugins/ToolMarkers.py:1296 msgid "Shape of the marker." msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:46 appPlugins/ToolMarkers.py:1300 msgid "Semi-Cross" msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:56 appPlugins/ToolMarkers.py:1310 msgid "The thickness of the line that makes the corner marker." msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:70 appPlugins/ToolMarkers.py:1324 msgid "The length of the line that makes the corner marker." msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:83 appPlugins/ToolMarkers.py:1505 msgid "Drill Diameter" msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:100 appPlugins/ToolMarkers.py:1356 msgid "Edge" msgstr "" #: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:108 appPlugins/ToolMarkers.py:1338 msgid "Offset locations from the set reference." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:21 msgid "Milling Plugin" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:30 appPlugins/ToolMilling.py:3922 msgid "Create CNCJob with toolpaths for milling either Geometry or drill holes." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:128 msgid "" "Height of the tool when\n" "moving without cutting." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:145 msgid "" "Include tool-change sequence\n" "in the Machine Code (Pause for tool change)." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:200 appPlugins/ToolMilling.py:4612 msgid "" "Cutting speed in the XY\n" "plane in units per minute" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:215 msgid "" "Cutting speed in the XY\n" "plane in units per minute.\n" "It is called also Plunge." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:232 msgid "" "Speed of the spindle in RPM (optional).\n" "If LASER preprocessor is used,\n" "this value is the power of laser." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:268 msgid "" "The Preprocessor file that dictates\n" "the Machine Code (like GCode, RML, HPGL) output." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:305 #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:149 #: appPlugins/ToolDrilling.py:2776 appPlugins/ToolMilling.py:4801 msgid "Toolchange X-Y" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:328 msgid "" "Cutting speed in the XY plane\n" "(in units per minute).\n" "This is for the rapid move G00.\n" "It is useful only for Marlin,\n" "ignore for any other cases." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:344 appPlugins/ToolMilling.py:4667 msgid "Re-cut" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:346 #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:358 appPlugins/ToolMilling.py:4669 #: appPlugins/ToolMilling.py:4682 msgid "" "In order to remove possible\n" "copper leftovers where first cut\n" "meet with last cut, we generate an\n" "extended cut over the first cut section." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:506 msgid "Add Polish" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:508 msgid "" "Will add a Paint section at the end of the GCode.\n" "A metallic brush will clean the material after milling." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:548 appPlugins/ToolMilling.py:4484 msgid "" "Algorithm for polishing:\n" "- Standard: Fixed step inwards.\n" "- Seed-based: Outwards from seed.\n" "- Line-based: Parallel lines." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:565 msgid "Excellon Milling" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:567 msgid "Will mill Excellon holes progressively from the center of the hole." msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:580 appPlugins/ToolMilling.py:4285 msgid "" "Milling type:\n" "- Drills -> will mill the drills associated with this tool\n" "- Slots -> will mill the slots associated with this tool\n" "- Both -> will mill both drills and mills or whatever is available" msgstr "" #: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:600 appPlugins/ToolMilling.py:4305 msgid "The diameter of the tool who will do the milling" msgstr "" #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:21 msgid "NCC Plugin" msgstr "" #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:28 msgid "" "Create a Geometry object with\n" "toolpaths to cut all non-copper regions." msgstr "" #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:251 msgid "Offset value" msgstr "" #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:312 appPlugins/ToolNCC.py:4531 msgid "" "Selection of area to be processed.\n" "- 'Itself' - the processing extent is based on the object that is processed.\n" " - 'Area Selection' - left mouse click to start selection of the area to be processed.\n" "- 'Reference Object' - will process the area specified by another object." msgstr "" #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:21 msgid "Paint Plugin" msgstr "" #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:259 appPlugins/ToolPaint.py:3278 msgid "" "Selection of area to be processed.\n" "- 'Polygon Selection' - left mouse click to add/remove polygons to be processed.\n" "- 'Area Selection' - left mouse click to start selection of the area to be processed.\n" "Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple areas.\n" "- 'All Polygons' - the process will start after click.\n" "- 'Reference Object' - will process the area specified by another object." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:20 msgid "Panelize Plugin" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:29 msgid "" "Create an object that contains an array of (x, y) elements,\n" "each element is a copy of the source object spaced\n" "at a X distance, Y distance of each other." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:95 appPlugins/ToolPanelize.py:1339 msgid "Geo" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:96 appPlugins/ToolPanelize.py:1340 msgid "Panel Type" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:98 appPlugins/ToolPanelize.py:1342 msgid "" "Choose the type of object for the panel object:\n" "- Gerber\n" "- Geometry" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:109 appPlugins/ToolPanelize.py:1352 msgid "" "Active only for Geometry panel type.\n" "When checked the application will find\n" "any two overlapping Line elements in the panel\n" "and will remove the overlapping parts, keeping only one of them." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:117 msgid "Constrain within" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:119 appPlugins/ToolPanelize.py:1362 msgid "" "Area define by DX and DY within to constrain the panel.\n" "DX and DY values are in current units.\n" "Regardless of how many columns and rows are desired,\n" "the final panel will have as many columns and rows as\n" "they fit completely within selected area." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:132 appPlugins/ToolPanelize.py:1374 msgid "Width (DX)" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:134 appPlugins/ToolPanelize.py:1376 msgid "" "The width (DX) within which the panel must fit.\n" "In current units." msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:145 appPlugins/ToolPanelize.py:1386 msgid "Height (DY)" msgstr "" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:147 appPlugins/ToolPanelize.py:1388 msgid "" "The height (DY)within which the panel must fit.\n" "In current units." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:21 msgid "SolderPaste Plugin" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:30 msgid "" "A tool to create GCode for dispensing\n" "solder paste onto a PCB." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:54 msgid "New Nozzle Dia" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:56 #: appPlugins/ToolSolderPaste.py:1313 msgid "Diameter for the new tool to add in the Tool Table" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:69 #: appPlugins/ToolSolderPaste.py:1362 msgid "Offset from the boundary." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:70 #: appPlugins/ToolSolderPaste.py:1363 msgid "Fraction of tool diameter." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:87 msgid "Z Dispense Start" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:89 #: appPlugins/ToolSolderPaste.py:1408 msgid "The height (Z) when solder paste dispensing starts." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:100 #: appPlugins/ToolSolderPaste.py:1533 msgid "Z Dispense" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:102 #: appPlugins/ToolSolderPaste.py:1421 msgid "The height (Z) when doing solder paste dispensing." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:113 msgid "Z Dispense Stop" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:115 #: appPlugins/ToolSolderPaste.py:1434 msgid "The height (Z) when solder paste dispensing stops." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:126 msgid "Z Travel" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:128 #: appPlugins/ToolSolderPaste.py:1382 msgid "" "The height (Z) for travel between pads\n" "(without dispensing solder paste)." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:140 msgid "Z Toolchange" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:142 #: appPlugins/ToolSolderPaste.py:1469 msgid "The height (Z) for tool (nozzle) change." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:151 #: appPlugins/ToolSolderPaste.py:1455 msgid "" "The X,Y location for tool (nozzle) change.\n" "The format is (x, y) where x and y are real numbers." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:165 #: appPlugins/ToolSolderPaste.py:1494 msgid "Feedrate (speed) while moving on the X-Y plane." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:173 #: appPlugins/ToolSolderPaste.py:1502 msgid "Feedrate while moving as fast as possible." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:192 #: appPlugins/ToolSolderPaste.py:1521 msgid "" "Feedrate (speed) while moving vertically\n" "(on Z plane)." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:204 msgid "Feedrate Z Dispense" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:206 #: appPlugins/ToolSolderPaste.py:1535 msgid "" "Feedrate (speed) while moving up vertically\n" "to Dispense position (on Z plane)." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:217 msgid "Spindle Speed FWD" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:219 #: appPlugins/ToolSolderPaste.py:1560 msgid "" "The dispenser speed while pushing solder paste\n" "through the dispenser nozzle." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:231 msgid "Dwell FWD" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:233 #: appPlugins/ToolSolderPaste.py:1574 msgid "Pause after solder dispensing." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:243 msgid "Spindle Speed REV" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:245 #: appPlugins/ToolSolderPaste.py:1597 msgid "" "The dispenser speed while retracting solder paste\n" "through the dispenser nozzle." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:257 msgid "Dwell REV" msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:259 #: appPlugins/ToolSolderPaste.py:1611 msgid "" "Pause after solder paste dispenser retracted,\n" "to allow pressure equilibrium." msgstr "" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:268 #: appPlugins/ToolSolderPaste.py:1634 msgid "Files that control the GCode generation." msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:17 msgid "Substractor Plugin" msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:26 msgid "" "A tool to substract one Gerber or Geometry object\n" "from another of the same type." msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:37 appPlugins/ToolSub.py:927 msgid "Close paths" msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:38 appPlugins/ToolSub.py:928 msgid "Checking this will close the paths cut by the subtractor object." msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:41 appPlugins/ToolSub.py:813 msgid "Delete source" msgstr "" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:43 appPlugins/ToolSub.py:815 msgid "" "When checked will delete the source objects\n" "after a successful operation." msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:21 msgid "Transform Plugin" msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:30 msgid "" "Various transformations that can be applied\n" "on a application object." msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:44 appPlugins/ToolTransform.py:600 msgid "" "The reference point for Rotate, Skew, Scale, Mirror.\n" "Can be:\n" "- Origin -> it is the 0, 0 point\n" "- Selection -> the center of the bounding box of the selected objects\n" "- Point -> a custom point defined by X,Y coordinates\n" "- Object -> the center of the bounding box of a specific object" msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70 appPlugins/ToolTransform.py:632 msgid "The type of object used as reference." msgstr "" #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:145 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:159 msgid "" "Angle, in degrees.\n" "Float number between -360 and 359." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:21 msgid "Autocompleter Keywords" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:25 #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:35 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:26 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:25 msgid "Restore" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:26 msgid "Restore the autocompleter keywords list to the default state." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:27 #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:37 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:28 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:27 appPlugins/ToolDrilling.py:2975 #: appPlugins/ToolMilling.py:5035 msgid "Delete All" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:28 msgid "Delete all autocompleter keywords from the list." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:36 msgid "Keywords list" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:38 msgid "" "List of keywords used by\n" "the autocompleter in FlatCAM.\n" "The autocompleter is installed\n" "in the Code Editor and for the Tcl Shell." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:59 #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:68 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:59 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:57 msgid "Extension" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:60 msgid "A keyword to be added or deleted to the list." msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:68 msgid "Add keyword" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:69 msgid "Add a keyword to the list" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:70 msgid "Delete keyword" msgstr "" #: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:71 msgid "Delete a keyword from the list" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:21 msgid "Excellon File associations" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:36 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:27 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:26 msgid "Restore the extension list to the default state." msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:38 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:29 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:28 msgid "Delete all extensions from the list." msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:46 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:37 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:36 msgid "Extensions list" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:48 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:39 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:38 msgid "" "List of file extensions to be\n" "associated with FlatCAM." msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:69 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:60 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:58 msgid "A file extension to be added or deleted to the list." msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:77 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:68 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:66 msgid "Add Extension" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:78 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:69 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:67 msgid "Add a file extension to the list" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:79 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:70 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:68 msgid "Delete Extension" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:80 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:71 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:69 msgid "Delete a file extension from the list" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:87 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:78 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:76 msgid "Apply Association" msgstr "" #: appGUI/preferences/utilities/FAExcPrefGroupUI.py:88 #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:79 #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:77 msgid "" "Apply the file associations between\n" "FlatCAM and the files with above extensions.\n" "They will be active after next logon.\n" "This work only in Windows." msgstr "" #: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:22 msgid "GCode File associations" msgstr "" #: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:21 msgid "Gerber File associations" msgstr "" #: appMain.py:955 msgid "The application is initializing ..." msgstr "" #: appMain.py:979 msgid "Could not find the Language files. The App strings are missing." msgstr "" #: appMain.py:1156 msgid "" "The application is initializing ...\n" "Canvas initialization started." msgstr "" #: appMain.py:1197 msgid "" "The application is initializing ...\n" "Canvas initialization started.\n" "Canvas initialization finished in" msgstr "" #: appMain.py:1351 appMain.py:10389 msgid "New Project - Not saved" msgstr "" #: appMain.py:1681 msgid "Found old default preferences files. Please reboot the application to update." msgstr "" #: appMain.py:1748 msgid "Open Config file failed." msgstr "" #: appMain.py:1763 msgid "Open Script file failed." msgstr "" #: appMain.py:1790 msgid "Open Excellon file failed." msgstr "" #: appMain.py:1803 msgid "Open GCode file failed." msgstr "" #: appMain.py:1816 msgid "Open Gerber file failed." msgstr "" #: appMain.py:2586 appMain.py:2602 appMain.py:2645 appMain.py:2661 appMain.py:2680 msgid "The Editor could not start." msgstr "" #: appMain.py:2586 appMain.py:5321 appMain.py:5802 appMain.py:6211 appMain.py:6295 #: appMain.py:6475 appMain.py:6784 appMain.py:6983 appMain.py:7029 appMain.py:7076 #: appMain.py:7131 appMain.py:7179 appMain.py:7337 appMain.py:9779 appMain.py:9876 #: appMain.py:9918 appMain.py:9960 appMain.py:10002 appMain.py:10043 appMain.py:10088 #: appMain.py:10133 appMain.py:10649 appPlugins/ToolDblSided.py:498 #: appPlugins/ToolDblSided.py:586 appPlugins/ToolExtract.py:408 #: appPlugins/ToolExtract.py:723 appPlugins/ToolExtract.py:826 appPlugins/ToolFilm.py:302 #: appPlugins/ToolFilm.py:309 appPlugins/ToolFilm.py:313 appPlugins/ToolMilling.py:2041 #: appPlugins/ToolMove.py:195 appPlugins/ToolPunchGerber.py:533 #: appPlugins/ToolPunchGerber.py:537 appPlugins/ToolReport.py:127 #: appPlugins/ToolTransform.py:167 appPlugins/ToolTransform.py:318 #: appPlugins/ToolTransform.py:350 appPlugins/ToolTransform.py:395 #: appPlugins/ToolTransform.py:429 appPlugins/ToolTransform.py:464 #: appPlugins/ToolTransform.py:501 camlib.py:2464 camlib.py:2537 camlib.py:2605 #: camlib.py:2680 msgid "No object is selected." msgstr "" #: appMain.py:2593 msgid "Select a Geometry, Gerber, Excellon or CNCJob Object to edit." msgstr "" #: appMain.py:2618 msgid "" "Simultaneous editing of tools geometry in a MultiGeo Geometry is not possible.\n" "Edit only one geometry at a time." msgstr "" #: appMain.py:2625 appPlugins/ToolDrilling.py:953 appPlugins/ToolDrilling.py:1233 #: appPlugins/ToolDrilling.py:1272 appPlugins/ToolIsolation.py:842 #: appPlugins/ToolIsolation.py:877 appPlugins/ToolMilling.py:1648 #: appPlugins/ToolMilling.py:1717 appPlugins/ToolNCC.py:534 appPlugins/ToolNCC.py:569 #: appPlugins/ToolPaint.py:493 appPlugins/ToolPaint.py:547 msgid "No Tool Selected" msgstr "" #: appMain.py:2720 msgid "EDITOR Area" msgstr "" #: appMain.py:2723 msgid "Editor is activated ..." msgstr "" #: appMain.py:2756 msgid "Do you want to save the changes?" msgstr "" #: appMain.py:2807 msgid "Object empty after edit." msgstr "" #: appMain.py:2812 appMain.py:2830 appMain.py:2861 appMain.py:2877 msgid "Editor exited. Editor content saved." msgstr "" #: appMain.py:2881 appMain.py:2933 msgid "Select a Gerber, Geometry, Excellon or CNCJob Object to update." msgstr "" #: appMain.py:2891 msgid "is updated, returning to App..." msgstr "" #: appMain.py:2908 msgid "Editor exited. Editor content was not saved." msgstr "" #: appMain.py:2958 msgid "Select a Gerber, Geometry, Excellon or CNCJob object to update." msgstr "" #: appMain.py:3101 appMain.py:3107 msgid "Save to file" msgstr "" #: appMain.py:3148 msgid "Exported file to" msgstr "" #: appMain.py:3185 msgid "Failed to open recent files file for writing." msgstr "" #: appMain.py:3196 msgid "Failed to open recent projects file for writing." msgstr "" #: appMain.py:3251 msgid "PCB Manufacturing files Viewer/Editor with Plugins" msgstr "" #: appMain.py:3252 msgid "Development" msgstr "" #: appMain.py:3253 msgid "DOWNLOAD" msgstr "" #: appMain.py:3254 msgid "Issue tracker" msgstr "" #: appMain.py:3258 appMain.py:3838 appMain.py:4021 msgid "Close" msgstr "" #: appMain.py:3273 msgid "Licensed under the MIT license" msgstr "" #: appMain.py:3282 msgid "" "Permission is hereby granted, free of charge, to any person obtaining a copy\n" "of this software and associated documentation files (the \"Software\"), to deal\n" "in the Software without restriction, including without limitation the rights\n" "to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n" "copies of the Software, and to permit persons to whom the Software is\n" "furnished to do so, subject to the following conditions:\n" "\n" "The above copyright notice and this permission notice shall be included in\n" "all copies or substantial portions of the Software.\n" "\n" "THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\n" "IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n" "FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n" "AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n" "LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\n" "OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n" "THE SOFTWARE." msgstr "" #: appMain.py:3304 msgid "" "Some of the icons used are from the following sources:
Icons by Freepik from www.flaticon.com
Icons " "by Icons8
Icons by oNline Web Fonts
Icons by Pixel perfect from www.flaticon.com
Icons by " "Anggara from www.flaticon." "com
Icons by Kharisma from www.flaticon.com
" msgstr "" #: appMain.py:3346 msgid "Splash" msgstr "" #: appMain.py:3352 msgid "Programmers" msgstr "" #: appMain.py:3358 msgid "Translators" msgstr "" #: appMain.py:3364 msgid "License" msgstr "" #: appMain.py:3370 msgid "Attributions" msgstr "" #: appMain.py:3615 msgid "Programmer" msgstr "" #: appMain.py:3616 msgid "Status" msgstr "" #: appMain.py:3617 appMain.py:3699 msgid "E-mail" msgstr "" #: appMain.py:3621 msgid "FlatCAM Author" msgstr "" #: appMain.py:3625 msgid "FlatCAM Evo Author/Maintainer" msgstr "" #: appMain.py:3697 msgid "Language" msgstr "" #: appMain.py:3698 msgid "Translator" msgstr "" #: appMain.py:3806 #, python-format msgid "This program is %s and free in a very wide meaning of the word." msgstr "" #: appMain.py:3807 msgid "Yet it cannot evolve without contributions." msgstr "" #: appMain.py:3808 msgid "If you want to see this application grow and become better and better" msgstr "" #: appMain.py:3809 msgid "you can contribute to the development yourself by:" msgstr "" #: appMain.py:3810 msgid "Pull Requests on the Bitbucket repository, if you are a developer" msgstr "" #: appMain.py:3812 msgid "Bug Reports by providing the steps required to reproduce the bug" msgstr "" #: appMain.py:3814 msgid "If you like what you have seen so far ..." msgstr "" #: appMain.py:3815 msgid "Donations are NOT required." msgstr "" #: appMain.py:3815 msgid "But they are welcomed" msgstr "" #: appMain.py:3846 msgid "Contribute" msgstr "" #: appMain.py:3867 msgid "Links Exchange" msgstr "" #: appMain.py:3880 appMain.py:3900 msgid "Soon ..." msgstr "" #: appMain.py:3887 msgid "How To's" msgstr "" #: appMain.py:4007 msgid "Alternative website" msgstr "" #: appMain.py:4008 msgid "" "This entry will resolve to another website if:\n" "\n" "1. FlatCAM.org website is down\n" "2. Someone forked FlatCAM project and wants to point\n" "to his own website\n" "\n" "If you can't get any informations about the application\n" "use the YouTube channel link from the Help menu." msgstr "" #: appMain.py:4042 appTranslation.py:217 msgid "" "There are files/objects modified.\n" "Do you want to Save the project?" msgstr "" #: appMain.py:4365 msgid "Selected Excellon file extensions registered with FlatCAM." msgstr "" #: appMain.py:4382 msgid "Selected GCode file extensions registered with FlatCAM." msgstr "" #: appMain.py:4398 msgid "Selected Gerber file extensions registered with FlatCAM." msgstr "" #: appMain.py:4586 appMain.py:4649 appMain.py:4680 msgid "At least two objects are required for join. Objects currently selected" msgstr "" #: appMain.py:4595 msgid "" "Failed join. The Geometry objects are of different types.\n" "At least one is MultiGeo type and the other is SingleGeo type. A possibility is to " "convert from one to another and retry joining \n" "but in the case of converting from MultiGeo to SingleGeo, informations may be lost and " "the result may not be what was expected. \n" "Check the generated GCODE." msgstr "" #: appMain.py:4610 appMain.py:4621 msgid "Geometry merging finished" msgstr "" #: appMain.py:4644 msgid "Failed. Excellon joining works only on Excellon objects." msgstr "" #: appMain.py:4657 msgid "Excellon merging finished" msgstr "" #: appMain.py:4675 msgid "Failed. Gerber joining works only on Gerber objects." msgstr "" #: appMain.py:4685 msgid "Gerber merging finished" msgstr "" #: appMain.py:4705 appMain.py:4741 msgid "Failed. Select a Geometry Object and try again." msgstr "" #: appMain.py:4709 appMain.py:4745 msgid "Expected a GeometryObject, got" msgstr "" #: appMain.py:4724 msgid "A Geometry object was converted to MultiGeo type." msgstr "" #: appMain.py:4762 msgid "A Geometry object was converted to SingleGeo type." msgstr "" #: appMain.py:4995 msgid "Units cannot be changed while the editor is active." msgstr "" #: appMain.py:5004 msgid "" "Changing the units of the project\n" "will scale all objects.\n" "\n" "Do you want to continue?" msgstr "" #: appMain.py:5058 msgid "Converted units to" msgstr "" #: appMain.py:5092 msgid "Workspace enabled." msgstr "" #: appMain.py:5095 msgid "Workspace disabled." msgstr "" #: appMain.py:5117 msgid "FlatCAM log opened." msgstr "" #: appMain.py:5166 appPlugins/ToolCutOut.py:428 appPlugins/ToolIsolation.py:1009 #: appPlugins/ToolIsolation.py:1331 appPlugins/ToolIsolation.py:1446 #: appPlugins/ToolMilling.py:2063 appPlugins/ToolMilling.py:2176 appPlugins/ToolNCC.py:1183 #: appPlugins/ToolNCC.py:1308 appPlugins/ToolNCC.py:1380 appPlugins/ToolPaint.py:661 #: appPlugins/ToolPaint.py:829 appPlugins/ToolPaint.py:962 appPlugins/ToolSolderPaste.py:373 #: appPlugins/ToolSolderPaste.py:559 msgid "Please enter a tool diameter with non-zero value, in Float format." msgstr "" #: appMain.py:5176 msgid "Tool adding ..." msgstr "" #: appMain.py:5177 msgid "" "Adding Tool works only when Advanced is checked.\n" "Go to Preferences -> General - Show Advanced Options." msgstr "" #: appMain.py:5267 msgid "Delete objects" msgstr "" #: appMain.py:5268 msgid "" "Are you sure you want to permanently delete\n" "the selected objects?" msgstr "" #: appMain.py:5323 msgid "Save the work in Editor and try again ..." msgstr "" #: appMain.py:5356 msgid "Object deleted" msgstr "" #: appMain.py:5369 msgid "Click to set the origin ..." msgstr "" #: appMain.py:5408 msgid "Setting Origin..." msgstr "" #: appMain.py:5429 appMain.py:5550 appMain.py:5662 msgid "Origin set" msgstr "" #: appMain.py:5449 msgid "Origin coordinates specified but incomplete." msgstr "" #: appMain.py:5496 msgid "Moving to Origin..." msgstr "" #: appMain.py:5500 appMain.py:5568 msgid "Failed. No object(s) selected..." msgstr "" #: appMain.py:5572 msgid "Quadrant 2" msgstr "" #: appMain.py:5573 msgid "Quadrant 1" msgstr "" #: appMain.py:5574 msgid "Quadrant 3" msgstr "" #: appMain.py:5575 msgid "Quadrant 4" msgstr "" #: appMain.py:5699 msgid "Jump to ..." msgstr "" #: appMain.py:5700 appMain.py:5960 msgid "Enter the coordinates in format X,Y:" msgstr "" #: appMain.py:5711 appMain.py:5970 msgid "Wrong coordinates. Enter coordinates in format: X,Y" msgstr "" #: appMain.py:5812 msgid "Locate ..." msgstr "" #: appMain.py:5959 msgid "Move to ..." msgstr "" #: appMain.py:6516 appMain.py:9427 msgid "Aborting." msgstr "" #: appMain.py:6516 msgid "The current task will be gracefully closed as soon as possible..." msgstr "" #: appMain.py:6523 msgid "The current task was gracefully closed on user request..." msgstr "" #: appMain.py:6726 msgid "Not available for Legacy 2D graphic mode." msgstr "" #: appMain.py:6795 appMain.py:6816 appPlugins/ToolCutOut.py:561 #: appPlugins/ToolIsolation.py:2978 appPlugins/ToolNCC.py:3916 appPlugins/ToolPaint.py:2790 msgid "Selected tool can't be used here. Pick another." msgstr "" #: appMain.py:6807 appMain.py:6826 appPlugins/ToolIsolation.py:2991 #: appPlugins/ToolNCC.py:3929 appPlugins/ToolPaint.py:2803 msgid "Tool from DB added in Tool Table." msgstr "" #: appMain.py:6828 msgid "Adding tool from DB is not allowed for this object." msgstr "" #: appMain.py:6846 msgid "Save Tools Database" msgstr "" #: appMain.py:6847 msgid "" "One or more Tools are edited.\n" "Do you want to save?" msgstr "" #: appMain.py:7079 appMain.py:7133 appMain.py:7181 msgid "Enter the Angle value:" msgstr "" #: appMain.py:7112 msgid "Rotation done." msgstr "" #: appMain.py:7114 msgid "Rotation movement was not executed." msgstr "" #: appMain.py:7163 msgid "Skew on X axis done." msgstr "" #: appMain.py:7211 msgid "Skew on Y axis done." msgstr "" #: appMain.py:7282 msgid "New Grid ..." msgstr "" #: appMain.py:7283 msgid "Enter a Grid Value:" msgstr "" #: appMain.py:7292 appMain.py:7317 msgid "Please enter a grid value with non-zero value, in Float format." msgstr "" #: appMain.py:7297 msgid "New Grid added" msgstr "" #: appMain.py:7299 msgid "Grid already exists" msgstr "" #: appMain.py:7301 msgid "Adding New Grid cancelled" msgstr "" #: appMain.py:7323 msgid "Grid Value does not exist" msgstr "" #: appMain.py:7325 msgid "Grid Value deleted" msgstr "" #: appMain.py:7327 msgid "Delete Grid value cancelled" msgstr "" #: appMain.py:7341 msgid "Name copied to clipboard ..." msgstr "" #: appMain.py:7897 appMain.py:7903 appMain.py:7909 appMain.py:7915 #: appObjects/ObjectCollection.py:991 appObjects/ObjectCollection.py:997 #: appObjects/ObjectCollection.py:1003 appObjects/ObjectCollection.py:1009 #: appObjects/ObjectCollection.py:1015 appObjects/ObjectCollection.py:1021 msgid "selected" msgstr "" #: appMain.py:8246 appMain.py:8250 msgid "Select an Gerber or Excellon file to view it's source file." msgstr "" #: appMain.py:8253 msgid "Viewing the source code of the selected object." msgstr "" #: appMain.py:8267 msgid "Source Editor" msgstr "" #: appMain.py:8303 appMain.py:8310 msgid "There is no selected object for which to see it's source file code." msgstr "" #: appMain.py:8319 msgid "Failed to load the source code for the selected object" msgstr "" #: appMain.py:8352 msgid "Go to Line ..." msgstr "" #: appMain.py:8353 msgid "Line" msgstr "" #: appMain.py:8387 msgid "Redrawing all objects" msgstr "" #: appMain.py:8484 msgid "Failed to load recent item list." msgstr "" #: appMain.py:8491 msgid "Failed to parse recent item list." msgstr "" #: appMain.py:8501 msgid "Failed to load recent projects item list." msgstr "" #: appMain.py:8508 msgid "Failed to parse recent project item list." msgstr "" #: appMain.py:8532 msgid "Recent files list was reset." msgstr "" #: appMain.py:8546 msgid "Recent projects list was reset." msgstr "" #: appMain.py:8571 msgid "Clear Recent projects" msgstr "" #: appMain.py:8595 msgid "Clear Recent files" msgstr "" #: appMain.py:8653 msgid "FlatCAM Evo" msgstr "" #: appMain.py:8657 msgid "Release date" msgstr "" #: appMain.py:8661 msgid "Displayed" msgstr "" #: appMain.py:8673 msgid "Canvas" msgstr "" #: appMain.py:8678 msgid "Workspace active" msgstr "" #: appMain.py:8682 msgid "Workspace size" msgstr "" #: appMain.py:8686 msgid "Workspace orientation" msgstr "" #: appMain.py:8748 msgid "Failed checking for latest version. Could not connect." msgstr "" #: appMain.py:8755 msgid "Could not parse information about latest version." msgstr "" #: appMain.py:8765 msgid "The application is up to date!" msgstr "" #: appMain.py:8769 msgid "Newer Version Available" msgstr "" #: appMain.py:8771 msgid "There is a newer version available for download:" msgstr "" #: appMain.py:8801 msgid "" "OpenGL canvas initialization failed. HW or HW configuration not supported.Change the " "graphic engine to Legacy(2D) in Edit -> Preferences -> General tab.\n" "\n" msgstr "" #: appMain.py:8892 msgid "All plots disabled." msgstr "" #: appMain.py:8898 msgid "All non selected plots disabled." msgstr "" #: appMain.py:8904 msgid "All plots enabled." msgstr "" #: appMain.py:8910 msgid "All non selected plots enabled." msgstr "" #: appMain.py:8918 msgid "Selected plots enabled..." msgstr "" #: appMain.py:8926 msgid "Selected plots disabled..." msgstr "" #: appMain.py:8968 msgid "Enabling plots ..." msgstr "" #: appMain.py:9021 msgid "Disabling plots ..." msgstr "" #: appMain.py:9189 msgid "Set alpha level ..." msgstr "" #: appMain.py:9588 appMain.py:9626 appMain.py:9669 appMain.py:9733 appMain.py:10512 #: appMain.py:11884 appMain.py:11952 msgid "" "Canvas initialization started.\n" "Canvas initialization finished in" msgstr "" #: appMain.py:9591 msgid "Opening Gerber file." msgstr "" #: appMain.py:9629 msgid "Opening Excellon file." msgstr "" #: appMain.py:9672 msgid "Opening G-Code file." msgstr "" #: appMain.py:9724 appMain.py:9728 msgid "Open HPGL2" msgstr "" #: appMain.py:9736 msgid "Opening HPGL2 file." msgstr "" #: appMain.py:9758 appMain.py:9761 msgid "Open Configuration File" msgstr "" #: appMain.py:9787 msgid "Only Geometry, Gerber and CNCJob objects can be used." msgstr "" #: appMain.py:9837 msgid "Data must be a 3D array with last dimension 3 or 4" msgstr "" #: appMain.py:9843 appMain.py:9848 msgid "Export PNG Image" msgstr "" #: appMain.py:9881 appMain.py:10093 msgid "Failed. Only Gerber objects can be saved as Gerber files..." msgstr "" #: appMain.py:9894 msgid "Save Gerber source file" msgstr "" #: appMain.py:9923 msgid "Failed. Only Script objects can be saved as TCL Script files..." msgstr "" #: appMain.py:9936 msgid "Save Script source file" msgstr "" #: appMain.py:9965 msgid "Failed. Only Document objects can be saved as Document files..." msgstr "" #: appMain.py:9978 msgid "Save Document source file" msgstr "" #: appMain.py:10007 appMain.py:10048 appMain.py:11037 msgid "Failed. Only Excellon objects can be saved as Excellon files..." msgstr "" #: appMain.py:10015 appMain.py:10020 msgid "Save Excellon source file" msgstr "" #: appMain.py:10138 msgid "Only Geometry objects can be used." msgstr "" #: appMain.py:10189 appMain.py:10193 msgid "Import SVG" msgstr "" #: appMain.py:10219 appMain.py:10223 msgid "Import DXF" msgstr "" #: appMain.py:10250 msgid "" "There are files/objects opened.\n" "Creating a New project will delete them.\n" "Do you want to Save the project?" msgstr "" #: appMain.py:10336 appMain.py:10364 appMain.py:10388 appMain.py:10409 msgid "seconds" msgstr "" #: appMain.py:10388 msgid "Project created in" msgstr "" #: appMain.py:10391 msgid "New Project created" msgstr "" #: appMain.py:10421 msgid "New TCL script file created in Code Editor." msgstr "" #: appMain.py:10448 appMain.py:10450 appMain.py:10485 appMain.py:10487 msgid "Open TCL script" msgstr "" #: appMain.py:10514 msgid "Executing ScriptObject file." msgstr "" #: appMain.py:10522 appMain.py:10526 msgid "Run TCL script" msgstr "" #: appMain.py:10549 msgid "TCL script file opened in Code Editor and executed." msgstr "" #: appMain.py:10597 appMain.py:10604 msgid "Save Project As ..." msgstr "" #: appMain.py:10641 msgid "General_print" msgstr "" #: appMain.py:10649 msgid "Print everything in the workspace." msgstr "" #: appMain.py:10655 appMain.py:10663 msgid "Save Object as PDF ..." msgstr "" #: appMain.py:10673 msgid "Printing PDF ..." msgstr "" #: appMain.py:10862 msgid "PDF file saved to" msgstr "" #: appMain.py:10884 appMain.py:11144 appMain.py:11278 appMain.py:11345 msgid "Exporting ..." msgstr "" #: appMain.py:10927 msgid "SVG file exported to" msgstr "" #: appMain.py:10942 appMain.py:10946 msgid "Import FlatCAM Preferences" msgstr "" #: appMain.py:10957 msgid "Imported Defaults from" msgstr "" #: appMain.py:10976 appMain.py:10982 msgid "Export FlatCAM Preferences" msgstr "" #: appMain.py:11002 msgid "Exported preferences to" msgstr "" #: appMain.py:11135 msgid "Excellon file exported to" msgstr "" #: appMain.py:11149 appMain.py:11156 appMain.py:11283 appMain.py:11290 appMain.py:11350 #: appMain.py:11357 msgid "Could not export." msgstr "" #: appMain.py:11270 msgid "Gerber file exported to" msgstr "" #: appMain.py:11336 msgid "DXF file exported to" msgstr "" #: appMain.py:11375 appMain.py:11431 appMain.py:11526 appMain.py:11565 appMain.py:11633 #: appMain.py:11850 appMain.py:11940 appPlugins/ToolImage.py:245 appPlugins/ToolPDF.py:96 msgid "File no longer available." msgstr "" #: appMain.py:11385 appMain.py:11441 msgid "Not supported type is picked as parameter. Only Geometry and Gerber are supported" msgstr "" #: appMain.py:11402 appMain.py:11459 appMain.py:11547 appMain.py:11616 appMain.py:11746 #: appMain.py:11811 appMain.py:11871 appPlugins/ToolImage.py:343 appPlugins/ToolPDF.py:212 msgid "Opened" msgstr "" #: appMain.py:11404 appMain.py:11461 appPlugins/ToolImage.py:328 #: appPlugins/ToolPcbWizard.py:362 tclCommands/TclCommandImportSvg.py:84 msgid "Importing" msgstr "" #: appMain.py:11412 appMain.py:11469 msgid "Import failed." msgstr "" #: appMain.py:11503 appMain.py:11770 appMain.py:11835 msgid "Failed to open file" msgstr "" #: appMain.py:11506 appMain.py:11773 appMain.py:11838 msgid "Failed to parse file" msgstr "" #: appMain.py:11518 msgid "Object is not Gerber file or empty. Aborting object creation." msgstr "" #: appMain.py:11529 appMain.py:11599 appMain.py:11723 appMain.py:11797 appMain.py:11853 #: tclCommands/TclCommandOpenDXF.py:90 msgid "Opening" msgstr "" #: appMain.py:11540 msgid "Open Gerber failed. Probable not a Gerber file." msgstr "" #: appMain.py:11575 appPlugins/ToolPcbWizard.py:335 msgid "This is not Excellon file." msgstr "" #: appMain.py:11578 msgid "Cannot open file" msgstr "" #: appMain.py:11596 appPlugins/ToolPDF.py:270 appPlugins/ToolPcbWizard.py:357 msgid "No geometry found in file" msgstr "" #: appMain.py:11609 msgid "Open Excellon file failed. Probable not an Excellon file." msgstr "" #: appMain.py:11645 msgid "Reading GCode file" msgstr "" #: appMain.py:11651 appPlugins/ToolPDF.py:194 msgid "Failed to open" msgstr "" #: appMain.py:11712 msgid "This is not GCODE" msgstr "" #: appMain.py:11736 msgid "" "Failed to create CNCJob Object. Probable not a GCode file. Try to load it from File " "menu.\n" " Attempting to create a FlatCAM CNCJob Object from G-Code file failed during processing" msgstr "" #: appMain.py:11792 msgid "Object is not HPGL2 file or empty. Aborting object creation." msgstr "" #: appMain.py:11804 msgid "Failed. Probable not a HPGL2 file." msgstr "" #: appMain.py:11830 msgid "TCL script file opened in Code Editor." msgstr "" #: appMain.py:11864 msgid "Failed to open TCL Script." msgstr "" #: appMain.py:11887 msgid "Opening FlatCAM Config file." msgstr "" #: appMain.py:11914 msgid "Failed to open config file" msgstr "" #: appMain.py:11949 msgid "Loading Project ... Please Wait ..." msgstr "" #: appMain.py:11955 msgid "Opening FlatCAM Project file." msgstr "" #: appMain.py:11960 msgid "Parsing..." msgstr "" #: appMain.py:11972 appMain.py:11976 appMain.py:11994 msgid "Failed to open project file" msgstr "" #: appMain.py:12010 msgid "Legacy Project" msgstr "" #: appMain.py:12011 msgid "" "The project was made with an older app version.\n" "It may not load correctly.\n" "\n" "Do you want to continue?" msgstr "" #: appMain.py:12049 msgid "Import Settings" msgstr "" #: appMain.py:12050 msgid "Do you want to import the loaded project settings?" msgstr "" #: appMain.py:12089 msgid "Loading..." msgstr "" #: appMain.py:12180 appMain.py:12187 msgid "Loading Project ... restoring" msgstr "" #: appMain.py:12195 msgid "Project loaded from" msgstr "" #: appMain.py:12229 msgid "Saving Project ..." msgstr "" #: appMain.py:12273 appMain.py:12329 msgid "Project saved to" msgstr "" #: appMain.py:12284 msgid "The object is used by another application." msgstr "" #: appMain.py:12304 msgid "Failed to verify project file" msgstr "" #: appMain.py:12304 appMain.py:12313 appMain.py:12321 appMain.py:12334 msgid "Retry to save it." msgstr "" #: appMain.py:12311 appMain.py:12319 appMain.py:12332 msgid "Failed to parse saved project file" msgstr "" #: appMain.py:12369 msgid "Save cancelled because source file is empty. Try to export the file." msgstr "" #: appObjects/AppObject.py:171 #, python-brace-format msgid "" "Object ({kind}) failed because: {error} \n" "\n" msgstr "" #: appObjects/AppObject.py:177 msgid "New object with name:" msgstr "" #: appObjects/AppObject.py:190 msgid "Converting units to " msgstr "" #: appObjects/AppObject.py:220 msgid "Gerber X2 drill file detected. Converted to Excellon object." msgstr "" #: appObjects/AppObject.py:264 appObjects/AppObject.py:270 appObjects/AppObject.py:276 #: appObjects/AppObject.py:282 appObjects/AppObject.py:288 appObjects/AppObject.py:294 msgid "created/selected" msgstr "" #: appObjects/AppObject.py:524 msgid "CREATE A NEW TCL SCRIPT" msgstr "" #: appObjects/AppObject.py:525 msgid "TCL Tutorial is here" msgstr "" #: appObjects/AppObject.py:527 msgid "Commands list" msgstr "" #: appObjects/AppObject.py:528 msgid "" "Type >help< followed by Run Code for a list of Tcl Commands (displayed in Tcl Shell)." msgstr "" #: appObjects/AppObjectTemplate.py:347 msgid "Name changed from" msgstr "" #: appObjects/AppObjectTemplate.py:347 appObjects/ObjectCollection.py:567 msgid "to" msgstr "" #: appObjects/AppObjectTemplate.py:358 tclCommands/TclCommandSetOrigin.py:113 msgid "Offsetting..." msgstr "" #: appObjects/AppObjectTemplate.py:372 appObjects/AppObjectTemplate.py:377 msgid "Scaling could not be executed." msgstr "" #: appObjects/AppObjectTemplate.py:381 appObjects/AppObjectTemplate.py:389 msgid "Scale done." msgstr "" #: appObjects/AppObjectTemplate.py:387 msgid "Scaling..." msgstr "" #: appObjects/AppObjectTemplate.py:405 msgid "Skewing..." msgstr "" #: appObjects/AppObjectTemplate.py:544 appPlugins/ToolCalculators.py:684 #: appPlugins/ToolReport.py:168 msgid "Dimensions" msgstr "" #: appObjects/AppObjectTemplate.py:552 appPlugins/ToolReport.py:177 msgid "Tools" msgstr "" #: appObjects/AppObjectTemplate.py:567 msgid "Calculating dimensions ... Please wait." msgstr "" #: appObjects/AppObjectTemplate.py:741 appObjects/AppObjectTemplate.py:749 msgid "Polygons" msgstr "" #: appObjects/AppObjectTemplate.py:743 msgid "LineStrings" msgstr "" #: appObjects/AppObjectTemplate.py:748 msgid "Elements" msgstr "" #: appObjects/AppObjectTemplate.py:786 appObjects/AppObjectTemplate.py:857 #: appPlugins/ToolReport.py:435 appPlugins/ToolReport.py:509 msgid "Drills number" msgstr "" #: appObjects/AppObjectTemplate.py:787 appObjects/AppObjectTemplate.py:859 #: appPlugins/ToolReport.py:436 appPlugins/ToolReport.py:511 msgid "Slots number" msgstr "" #: appObjects/AppObjectTemplate.py:789 appPlugins/ToolReport.py:438 msgid "Drills total number:" msgstr "" #: appObjects/AppObjectTemplate.py:790 appPlugins/ToolReport.py:439 msgid "Slots total number:" msgstr "" #: appObjects/AppObjectTemplate.py:818 appObjects/AppObjectTemplate.py:821 #: appObjects/AppObjectTemplate.py:824 appObjects/AppObjectTemplate.py:854 #: appObjects/AppObjectTemplate.py:861 appObjects/AppObjectTemplate.py:864 #: appPlugins/ToolReport.py:470 appPlugins/ToolReport.py:473 appPlugins/ToolReport.py:476 #: appPlugins/ToolReport.py:506 appPlugins/ToolReport.py:513 appPlugins/ToolReport.py:516 msgid "Present" msgstr "" #: appObjects/AppObjectTemplate.py:819 appObjects/AppObjectTemplate.py:855 #: appPlugins/ToolReport.py:471 appPlugins/ToolReport.py:507 msgid "Solid Geometry" msgstr "" #: appObjects/AppObjectTemplate.py:822 appObjects/AppObjectTemplate.py:862 #: appPlugins/ToolReport.py:474 appPlugins/ToolReport.py:514 msgid "GCode Text" msgstr "" #: appObjects/AppObjectTemplate.py:825 appObjects/AppObjectTemplate.py:865 #: appPlugins/ToolReport.py:477 appPlugins/ToolReport.py:517 msgid "GCode Geometry" msgstr "" #: appObjects/AppObjectTemplate.py:833 appObjects/AppObjectTemplate.py:908 #: appPlugins/ToolReport.py:485 appPlugins/ToolReport.py:560 msgid "Tool Data" msgstr "" #: appObjects/AppObjectTemplate.py:872 appPlugins/ToolReport.py:524 msgid "Depth of Cut" msgstr "" #: appObjects/AppObjectTemplate.py:884 appPlugins/ToolReport.py:536 msgid "Clearance Height" msgstr "" #: appObjects/AppObjectTemplate.py:922 appPlugins/ToolReport.py:574 msgid "Routing time" msgstr "" #: appObjects/AppObjectTemplate.py:953 appObjects/AppObjectTemplate.py:961 #: appPlugins/ToolReport.py:605 appPlugins/ToolReport.py:613 msgid "Box Area" msgstr "" #: appObjects/AppObjectTemplate.py:956 appObjects/AppObjectTemplate.py:964 #: appPlugins/ToolReport.py:608 appPlugins/ToolReport.py:616 msgid "Convex_Hull Area" msgstr "" #: appObjects/AppObjectTemplate.py:971 appObjects/AppObjectTemplate.py:974 #: appPlugins/ToolReport.py:623 appPlugins/ToolReport.py:626 msgid "Copper Area" msgstr "" #: appObjects/CNCJobObject.py:732 appPlugins/ToolLevelling.py:1476 #: appPlugins/ToolLevelling.py:1668 appPlugins/ToolSolderPaste.py:1184 msgid "Export cancelled ..." msgstr "" #: appObjects/CNCJobObject.py:770 msgid "File saved to" msgstr "" #: appObjects/CNCJobObject.py:794 msgid "Code Review" msgstr "" #: appObjects/CNCJobObject.py:842 msgid "CNC Machine Code could not be updated" msgstr "" #: appObjects/CNCJobObject.py:846 msgid "CNC Machine Code was updated" msgstr "" #: appObjects/DocumentObject.py:168 msgid "Document Editor" msgstr "" #: appObjects/ExcellonObject.py:996 appObjects/ExcellonObject.py:1101 #: appPlugins/ToolDrilling.py:1973 appPlugins/ToolMilling.py:2537 #: appPlugins/ToolMilling.py:2642 msgid "Please select one or more tools from the list and try again." msgstr "" #: appObjects/ExcellonObject.py:1001 appPlugins/ToolMilling.py:2542 msgid "Milling tool for DRILLS is larger than hole size. Cancelled." msgstr "" #: appObjects/ExcellonObject.py:1002 appPlugins/ToolDrilling.py:908 #: appPlugins/ToolDrilling.py:1285 appPlugins/ToolDrilling.py:2486 #: appPlugins/ToolIsolation.py:902 appPlugins/ToolIsolation.py:3551 #: appPlugins/ToolMilling.py:1656 appPlugins/ToolMilling.py:1729 #: appPlugins/ToolMilling.py:2543 appPlugins/ToolMilling.py:4254 appPlugins/ToolNCC.py:592 #: appPlugins/ToolNCC.py:2483 appPlugins/ToolNCC.py:4266 appPlugins/ToolPaint.py:569 #: appPlugins/ToolPaint.py:3128 msgid "Tool" msgstr "" #: appObjects/ExcellonObject.py:1110 appPlugins/ToolMilling.py:2651 msgid "Milling tool for SLOTS is larger than hole size. Cancelled." msgstr "" #: appObjects/GeometryObject.py:513 msgid "Vertex points calculated." msgstr "" #: appObjects/GeometryObject.py:725 appObjects/GeometryObject.py:879 #: appPlugins/ToolMilling.py:3097 appPlugins/ToolMilling.py:3411 msgid "" "Tool Offset is selected in Tool Table but no value is provided.\n" "Add a Tool Offset or change the Offset Type." msgstr "" #: appObjects/GeometryObject.py:792 appObjects/GeometryObject.py:940 #: appPlugins/ToolMilling.py:3171 appPlugins/ToolMilling.py:3464 msgid "G-Code parsing in progress..." msgstr "" #: appObjects/GeometryObject.py:794 appObjects/GeometryObject.py:942 #: appPlugins/ToolMilling.py:3173 appPlugins/ToolMilling.py:3466 msgid "G-Code parsing finished..." msgstr "" #: appObjects/GeometryObject.py:801 appObjects/GeometryObject.py:951 #: appObjects/GeometryObject.py:1124 appPlugins/ToolMilling.py:3180 #: appPlugins/ToolMilling.py:3475 msgid "Finished G-Code processing" msgstr "" #: appObjects/GeometryObject.py:803 appObjects/GeometryObject.py:953 #: appPlugins/ToolMilling.py:3182 appPlugins/ToolMilling.py:3477 msgid "G-Code processing failed with error" msgstr "" #: appObjects/GeometryObject.py:846 appPlugins/ToolMilling.py:3225 msgid "Cancelled. Empty file, it has no geometry" msgstr "" #: appObjects/GeometryObject.py:969 appObjects/GeometryObject.py:974 #: appObjects/GeometryObject.py:1131 appPlugins/ToolMilling.py:3504 #: appPlugins/ToolMilling.py:3519 appPlugins/ToolSolderPaste.py:1079 msgid "CNCjob created" msgstr "" #: appObjects/GeometryObject.py:1157 appObjects/GeometryObject.py:1166 #: appParsers/ParseGerber.py:2112 appParsers/ParseGerber.py:2122 msgid "Scale factor has to be a number: integer or float." msgstr "" #: appObjects/GeometryObject.py:1246 appParsers/ParseGerber.py:2241 msgid "" "An (x,y) pair of values are needed. Probable you entered only one value in the Offset " "field." msgstr "" #: appObjects/GeometryObject.py:1337 msgid "" "The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y)\n" "but now there is only one value, not two." msgstr "" #: appObjects/GerberObject.py:420 appPlugins/ToolIsolation.py:1586 msgid "Buffering solid geometry" msgstr "" #: appObjects/GerberObject.py:465 appObjects/GerberObject.py:514 msgid "Operation could not be done." msgstr "" #: appObjects/GerberObject.py:613 appObjects/GerberObject.py:688 #: appPlugins/ToolIsolation.py:1827 appPlugins/ToolIsolation.py:2248 #: appPlugins/ToolNCC.py:2052 appPlugins/ToolNCC.py:3072 appPlugins/ToolNCC.py:3453 msgid "Isolation geometry could not be generated." msgstr "" #: appObjects/GerberObject.py:640 appObjects/GerberObject.py:731 #: appPlugins/ToolIsolation.py:1925 appPlugins/ToolIsolation.py:2141 #: appPlugins/ToolIsolation.py:2368 msgid "Isolation geometry created" msgstr "" #: appObjects/ObjectCollection.py:268 msgid "Script" msgstr "" #: appObjects/ObjectCollection.py:447 msgid "Batch Save" msgstr "" #: appObjects/ObjectCollection.py:567 msgid "Object renamed from" msgstr "" #: appObjects/ObjectCollection.py:1067 msgid "Cause of error" msgstr "" #: appObjects/ObjectCollection.py:1267 msgid "All objects are selected." msgstr "" #: appObjects/ObjectCollection.py:1277 msgid "Objects selection is cleared." msgstr "" #: appObjects/ScriptObject.py:157 msgid "Script Editor" msgstr "" #: appParsers/ParseExcellon.py:292 msgid "This is GCODE mark" msgstr "" #: appParsers/ParseExcellon.py:439 msgid "" "No tool diameter info's. See shell.\n" "A tool change event: T" msgstr "" #: appParsers/ParseExcellon.py:442 msgid "" "was found but the Excellon file have no informations regarding the tool diameters " "therefore the application will try to load it by using some 'fake' diameters.\n" "The user needs to edit the resulting Excellon object and change the diameters to reflect " "the real diameters." msgstr "" #: appParsers/ParseExcellon.py:979 msgid "" "Excellon Parser error.\n" "Parsing Failed. Line" msgstr "" #: appParsers/ParseFont.py:304 msgid "Font not supported, try another one." msgstr "" #: appParsers/ParseGerber.py:446 msgid "Gerber processing. Parsing" msgstr "" #: appParsers/ParseGerber.py:475 msgid "Gerber X2 format detected. Parsing may not be done correctly." msgstr "" #: appParsers/ParseGerber.py:479 msgid "Drill file Gerber X2 format detected. Parsing may not be done correctly." msgstr "" #: appParsers/ParseGerber.py:1171 appParsers/ParseGerber.py:1272 #: appParsers/ParseHPGL2.py:293 appParsers/ParseHPGL2.py:307 appParsers/ParseHPGL2.py:326 #: appParsers/ParseHPGL2.py:350 appParsers/ParseHPGL2.py:385 msgid "Coordinates missing, line ignored" msgstr "" #: appParsers/ParseGerber.py:1173 appParsers/ParseGerber.py:1274 msgid "GERBER file might be CORRUPT. Check the file !!!" msgstr "" #: appParsers/ParseGerber.py:1227 msgid "" "Region does not have enough points. File will be processed but there are parser errors. " "Line number" msgstr "" #: appParsers/ParseGerber.py:1664 appParsers/ParseHPGL2.py:420 msgid "Gerber processing. Joining polygons" msgstr "" #: appParsers/ParseGerber.py:1682 msgid "Gerber processing. Applying Gerber polarity." msgstr "" #: appParsers/ParseGerber.py:1740 msgid "Gerber Line" msgstr "" #: appParsers/ParseGerber.py:1740 msgid "Gerber Line Content" msgstr "" #: appParsers/ParseGerber.py:1741 msgid "Gerber Parser ERROR" msgstr "" #: appParsers/ParseGerber.py:2663 msgid "Gerber Buffer done." msgstr "" #: appParsers/ParseHPGL2.py:200 msgid "HPGL2 processing. Parsing" msgstr "" #: appParsers/ParseHPGL2.py:432 msgid "HPGL2 Line" msgstr "" #: appParsers/ParseHPGL2.py:432 msgid "HPGL2 Line Content" msgstr "" #: appParsers/ParseHPGL2.py:433 msgid "HPGL2 Parser ERROR" msgstr "" #: appPlugins/ToolAlignObjects.py:121 msgid "Align Tool" msgstr "" #: appPlugins/ToolAlignObjects.py:172 msgid "There is no aligned FlatCAM object selected..." msgstr "" #: appPlugins/ToolAlignObjects.py:182 msgid "There is no aligner FlatCAM object selected..." msgstr "" #: appPlugins/ToolAlignObjects.py:204 appPlugins/ToolAlignObjects.py:268 msgid "First Point" msgstr "" #: appPlugins/ToolAlignObjects.py:204 appPlugins/ToolAlignObjects.py:283 msgid "Click on the START point." msgstr "" #: appPlugins/ToolAlignObjects.py:263 appPlugins/ToolDblSided.py:480 #: appPlugins/ToolFiducials.py:826 appPlugins/ToolMarkers.py:1119 msgid "Cancelled by user request." msgstr "" #: appPlugins/ToolAlignObjects.py:268 appPlugins/ToolAlignObjects.py:290 #: appPlugins/ToolDistance.py:382 appPlugins/ToolMove.py:129 appPlugins/ToolQRCode.py:274 msgid "Click on the DESTINATION point ..." msgstr "" #: appPlugins/ToolAlignObjects.py:268 appPlugins/ToolAlignObjects.py:283 #: appPlugins/ToolAlignObjects.py:290 msgid "Or right click to cancel." msgstr "" #: appPlugins/ToolAlignObjects.py:283 appPlugins/ToolAlignObjects.py:290 #: appPlugins/ToolFiducials.py:1002 msgid "Second Point" msgstr "" #: appPlugins/ToolAlignObjects.py:410 msgid "MOVING object" msgstr "" #: appPlugins/ToolAlignObjects.py:412 msgid "" "Specify the type of object to be aligned.\n" "It can be of type: Gerber or Excellon.\n" "The selection here decide the type of objects that will be\n" "in the Object combobox." msgstr "" #: appPlugins/ToolAlignObjects.py:441 msgid "Object to be aligned." msgstr "" #: appPlugins/ToolAlignObjects.py:449 msgid "DESTINATION object" msgstr "" #: appPlugins/ToolAlignObjects.py:451 msgid "" "Specify the type of object to be aligned to.\n" "It can be of type: Gerber or Excellon.\n" "The selection here decide the type of objects that will be\n" "in the Object combobox." msgstr "" #: appPlugins/ToolAlignObjects.py:480 msgid "Object to be aligned to. Aligner." msgstr "" #: appPlugins/ToolAlignObjects.py:499 msgid "Alignment Type" msgstr "" #: appPlugins/ToolAlignObjects.py:501 msgid "" "The type of alignment can be:\n" "- Single Point -> it require a single point of sync, the action will be a translation\n" "- Dual Point -> it require two points of sync, the action will be translation followed by " "rotation" msgstr "" #: appPlugins/ToolAlignObjects.py:507 msgid "Single Point" msgstr "" #: appPlugins/ToolAlignObjects.py:508 msgid "Dual Point" msgstr "" #: appPlugins/ToolAlignObjects.py:517 msgid "Align Object" msgstr "" #: appPlugins/ToolAlignObjects.py:520 msgid "" "Align the specified object to the aligner object.\n" "If only one point is used then it assumes translation.\n" "If tho points are used it assume translation and rotation." msgstr "" #: appPlugins/ToolAlignObjects.py:529 appPlugins/ToolCalculators.py:1043 #: appPlugins/ToolCopperThieving.py:1747 appPlugins/ToolCutOut.py:2798 #: appPlugins/ToolDblSided.py:1121 appPlugins/ToolDrilling.py:3010 #: appPlugins/ToolEtchCompensation.py:486 appPlugins/ToolExtract.py:1424 #: appPlugins/ToolFiducials.py:1194 appPlugins/ToolFilm.py:1787 appPlugins/ToolFollow.py:758 #: appPlugins/ToolInvertGerber.py:294 appPlugins/ToolIsolation.py:3994 #: appPlugins/ToolLevelling.py:2322 appPlugins/ToolMarkers.py:1589 #: appPlugins/ToolMilling.py:5069 appPlugins/ToolNCC.py:4603 #: appPlugins/ToolObjectDistance.py:612 appPlugins/ToolOptimal.py:689 #: appPlugins/ToolPaint.py:3349 appPlugins/ToolPanelize.py:1419 #: appPlugins/ToolPunchGerber.py:2368 appPlugins/ToolQRCode.py:996 #: appPlugins/ToolRulesCheck.py:1767 appPlugins/ToolSolderPaste.py:1736 #: appPlugins/ToolSub.py:947 appPlugins/ToolTransform.py:1011 msgid "Reset Tool" msgstr "" #: appPlugins/ToolAlignObjects.py:532 appPlugins/ToolCalculators.py:1046 #: appPlugins/ToolCopperThieving.py:1750 appPlugins/ToolCutOut.py:2801 #: appPlugins/ToolDblSided.py:1124 appPlugins/ToolDrilling.py:3013 #: appPlugins/ToolEtchCompensation.py:489 appPlugins/ToolExtract.py:1427 #: appPlugins/ToolFiducials.py:1197 appPlugins/ToolFilm.py:1790 appPlugins/ToolFollow.py:761 #: appPlugins/ToolInvertGerber.py:297 appPlugins/ToolIsolation.py:3997 #: appPlugins/ToolLevelling.py:2325 appPlugins/ToolMarkers.py:1592 #: appPlugins/ToolMilling.py:5072 appPlugins/ToolNCC.py:4606 #: appPlugins/ToolObjectDistance.py:615 appPlugins/ToolOptimal.py:692 #: appPlugins/ToolPaint.py:3352 appPlugins/ToolPanelize.py:1422 #: appPlugins/ToolPunchGerber.py:2371 appPlugins/ToolQRCode.py:999 #: appPlugins/ToolRulesCheck.py:1770 appPlugins/ToolSolderPaste.py:1739 #: appPlugins/ToolSub.py:950 appPlugins/ToolTransform.py:1014 msgid "Will reset the tool parameters." msgstr "" #: appPlugins/ToolCalculators.py:207 msgid "Cut width (tool diameter) calculated." msgstr "" #: appPlugins/ToolCalculators.py:229 msgid "Tool diameter (cut width) cannot be smaller than the tip diameter." msgstr "" #: appPlugins/ToolCalculators.py:235 msgid "Cut depth (Cut Z) calculated." msgstr "" #: appPlugins/ToolCalculators.py:502 msgid "V-Shape Tool" msgstr "" #: appPlugins/ToolCalculators.py:503 msgid "Units Conversion" msgstr "" #: appPlugins/ToolCalculators.py:504 msgid "ElectroPlating" msgstr "" #: appPlugins/ToolCalculators.py:505 msgid "Tinning" msgstr "" #: appPlugins/ToolCalculators.py:543 appPlugins/ToolCalculators.py:558 #: appPlugins/ToolCalculators.py:573 msgid "Here you enter the value to be converted from imperial to metric" msgstr "" #: appPlugins/ToolCalculators.py:546 appPlugins/ToolCalculators.py:561 #: appPlugins/ToolCalculators.py:576 msgid "Here you enter the value to be converted from metric to imperial" msgstr "" #: appPlugins/ToolCalculators.py:552 msgid "oz" msgstr "" #: appPlugins/ToolCalculators.py:553 msgid "gram" msgstr "" #: appPlugins/ToolCalculators.py:567 msgid "fl oz" msgstr "" #: appPlugins/ToolCalculators.py:568 appPlugins/ToolCalculators.py:945 #: appPlugins/ToolCalculators.py:965 appPlugins/ToolCalculators.py:1020 msgid "mL" msgstr "" #: appPlugins/ToolCalculators.py:615 msgid "" "This is the angle of the tip of the tool.\n" "It is specified by manufacturer." msgstr "" #: appPlugins/ToolCalculators.py:627 msgid "This is the depth to cut into the material." msgstr "" #: appPlugins/ToolCalculators.py:638 msgid "" "This is the actual tool diameter\n" "at the desired depth of cut." msgstr "" #: appPlugins/ToolCalculators.py:651 msgid "Calculate either the depth of cut or the effective tool diameter." msgstr "" #: appPlugins/ToolCalculators.py:676 msgid "Area Calculation" msgstr "" #: appPlugins/ToolCalculators.py:681 msgid "Determine the board area." msgstr "" #: appPlugins/ToolCalculators.py:692 msgid "Board Length." msgstr "" #: appPlugins/ToolCalculators.py:699 appPlugins/ToolCalculators.py:718 #: appPlugins/ToolCalculators.py:737 appPlugins/ToolCopperThieving.py:1705 msgid "cm" msgstr "" #: appPlugins/ToolCalculators.py:730 msgid "Board area." msgstr "" #: appPlugins/ToolCalculators.py:754 msgid "" "Current density applied to the board. \n" "In Amperes per Square Feet ASF." msgstr "" #: appPlugins/ToolCalculators.py:775 msgid "Thickness of the deposited copper." msgstr "" #: appPlugins/ToolCalculators.py:783 msgid "um" msgstr "" #: appPlugins/ToolCalculators.py:799 msgid "Output" msgstr "" #: appPlugins/ToolCalculators.py:803 msgid "Current Value" msgstr "" #: appPlugins/ToolCalculators.py:804 msgid "" "This is the current intensity value\n" "to be set on the Power Supply." msgstr "" #: appPlugins/ToolCalculators.py:825 msgid "Time" msgstr "" #: appPlugins/ToolCalculators.py:826 msgid "The time calculated to deposit copper." msgstr "" #: appPlugins/ToolCalculators.py:851 msgid "" "Calculator for chemical quantities\n" "required for tinning PCB's." msgstr "" #: appPlugins/ToolCalculators.py:863 msgid "Solution" msgstr "" #: appPlugins/ToolCalculators.py:865 msgid "Choose one solution for tinning." msgstr "" #: appPlugins/ToolCalculators.py:877 msgid "Stannous Chloride." msgstr "" #: appPlugins/ToolCalculators.py:885 appPlugins/ToolCalculators.py:905 #: appPlugins/ToolCalculators.py:925 appPlugins/ToolCalculators.py:996 msgid "g" msgstr "" #: appPlugins/ToolCalculators.py:896 appPlugins/ToolCalculators.py:897 msgid "Thiourea" msgstr "" #: appPlugins/ToolCalculators.py:917 msgid "Sulfamic Acid." msgstr "" #: appPlugins/ToolCalculators.py:937 msgid "Distilled Water." msgstr "" #: appPlugins/ToolCalculators.py:956 msgid "Soap" msgstr "" #: appPlugins/ToolCalculators.py:957 msgid "Liquid soap." msgstr "" #: appPlugins/ToolCalculators.py:980 msgid "Optional" msgstr "" #: appPlugins/ToolCalculators.py:986 msgid "" "Sodium hypophosphite.\n" "Optional, for solution stability.\n" "Warning: List 1 chemical in USA." msgstr "" #: appPlugins/ToolCalculators.py:1012 msgid "Volume" msgstr "" #: appPlugins/ToolCalculators.py:1013 msgid "Desired volume of tinning solution." msgstr "" #: appPlugins/ToolCalculators.py:1034 msgid "Calculate the chemical quantities for the desired volume of tinning solution." msgstr "" #: appPlugins/ToolCopperThieving.py:216 appPlugins/ToolCopperThieving.py:242 msgid "Lines Grid works only for 'itself' reference ..." msgstr "" #: appPlugins/ToolCopperThieving.py:227 msgid "Solid fill selected." msgstr "" #: appPlugins/ToolCopperThieving.py:232 msgid "Dots grid fill selected." msgstr "" #: appPlugins/ToolCopperThieving.py:237 msgid "Squares grid fill selected." msgstr "" #: appPlugins/ToolCopperThieving.py:260 appPlugins/ToolCopperThieving.py:358 #: appPlugins/ToolCopperThieving.py:972 appPlugins/ToolFiducials.py:300 #: appPlugins/ToolFiducials.py:615 appPlugins/ToolMarkers.py:356 #: appPlugins/ToolMarkers.py:391 appPlugins/ToolMarkers.py:422 appPlugins/ToolMarkers.py:484 #: appPlugins/ToolMarkers.py:819 appPlugins/ToolMarkers.py:928 #: appPlugins/ToolMarkers.py:1040 appPlugins/ToolOptimal.py:209 appPlugins/ToolQRCode.py:226 msgid "There is no Gerber object loaded ..." msgstr "" #: appPlugins/ToolCopperThieving.py:273 appPlugins/ToolCopperThieving.py:872 msgid "Append geometry" msgstr "" #: appPlugins/ToolCopperThieving.py:328 appPlugins/ToolCopperThieving.py:923 #: appPlugins/ToolCopperThieving.py:1131 msgid "Append source file" msgstr "" #: appPlugins/ToolCopperThieving.py:341 appPlugins/ToolCopperThieving.py:936 msgid "Copper Thieving Tool done." msgstr "" #: appPlugins/ToolCopperThieving.py:368 appPlugins/ToolCopperThieving.py:388 #: appPlugins/ToolCutOut.py:642 appPlugins/ToolCutOut.py:1037 appPlugins/ToolCutOut.py:1441 #: appPlugins/ToolCutOut.py:1533 appPlugins/ToolCutOut.py:1577 appPlugins/ToolCutOut.py:1680 #: appPlugins/ToolDrilling.py:923 appPlugins/ToolDrilling.py:1938 #: appPlugins/ToolEtchCompensation.py:181 appPlugins/ToolFollow.py:194 #: appPlugins/ToolFollow.py:244 appPlugins/ToolInvertGerber.py:130 #: appPlugins/ToolIsolation.py:1162 appPlugins/ToolIsolation.py:1226 #: appPlugins/ToolIsolation.py:1594 appPlugins/ToolIsolation.py:1623 #: appPlugins/ToolIsolation.py:2604 appPlugins/ToolLevelling.py:325 #: appPlugins/ToolMilling.py:655 appPlugins/ToolMilling.py:872 #: appPlugins/ToolMilling.py:1358 appPlugins/ToolMilling.py:1702 #: appPlugins/ToolMilling.py:1786 appPlugins/ToolMilling.py:2715 #: appPlugins/ToolMilling.py:2738 appPlugins/ToolMilling.py:2903 appPlugins/ToolNCC.py:999 #: appPlugins/ToolNCC.py:1068 appPlugins/ToolNCC.py:1513 appPlugins/ToolNCC.py:1563 #: appPlugins/ToolNCC.py:1598 appPlugins/ToolPaint.py:1134 appPlugins/ToolPaint.py:1223 #: appPlugins/ToolPanelize.py:304 appPlugins/ToolPanelize.py:318 appPlugins/ToolSub.py:273 #: appPlugins/ToolSub.py:292 appPlugins/ToolSub.py:506 appPlugins/ToolSub.py:519 #: tclCommands/TclCommandBuffer.py:87 tclCommands/TclCommandCopperClear.py:97 #: tclCommands/TclCommandCopperClear.py:252 tclCommands/TclCommandPaint.py:100 #: tclCommands/TclCommandPaint.py:273 tclCommands/TclCommandScale.py:110 #: tclCommands/TclCommandSkew.py:164 msgid "Could not retrieve object" msgstr "" #: appPlugins/ToolCopperThieving.py:416 msgid "Click the end point of the filling area." msgstr "" #: appPlugins/ToolCopperThieving.py:543 msgid "Copper Thieving Tool started. Reading parameters." msgstr "" #: appPlugins/ToolCopperThieving.py:569 msgid "Copper Thieving Tool. Preparing isolation polygons." msgstr "" #: appPlugins/ToolCopperThieving.py:615 msgid "Copper Thieving Tool. Preparing areas to fill with copper." msgstr "" #: appPlugins/ToolCopperThieving.py:659 msgid "Geometry not supported for" msgstr "" #: appPlugins/ToolCopperThieving.py:665 appPlugins/ToolNCC.py:1884 #: appPlugins/ToolNCC.py:1932 appPlugins/ToolNCC.py:2934 appPlugins/ToolPaint.py:2623 msgid "No object available." msgstr "" #: appPlugins/ToolCopperThieving.py:698 appPlugins/ToolNCC.py:1902 #: appPlugins/ToolNCC.py:1955 appPlugins/ToolNCC.py:2967 msgid "The reference object type is not supported." msgstr "" #: appPlugins/ToolCopperThieving.py:703 msgid "Copper Thieving Tool. Appending new geometry and buffering." msgstr "" #: appPlugins/ToolCopperThieving.py:739 msgid "Create geometry" msgstr "" #: appPlugins/ToolCopperThieving.py:947 appPlugins/ToolCopperThieving.py:951 msgid "P-Plating Mask" msgstr "" #: appPlugins/ToolCopperThieving.py:975 msgid "Append PP-M geometry" msgstr "" #: appPlugins/ToolCopperThieving.py:1151 msgid "Generating Pattern Plating Mask done." msgstr "" #: appPlugins/ToolCopperThieving.py:1194 msgid "Copper Thieving Tool exit." msgstr "" #: appPlugins/ToolCopperThieving.py:1273 appPlugins/ToolCopperThieving.py:1647 #: appPlugins/ToolCutOut.py:2281 appPlugins/ToolDblSided.py:716 #: appPlugins/ToolDrilling.py:2396 appPlugins/ToolEtchCompensation.py:309 #: appPlugins/ToolExtract.py:1008 appPlugins/ToolFiducials.py:933 #: appPlugins/ToolFilm.py:1263 appPlugins/ToolFollow.py:691 #: appPlugins/ToolInvertGerber.py:216 appPlugins/ToolIsolation.py:3387 #: appPlugins/ToolLevelling.py:1755 appPlugins/ToolMarkers.py:1263 #: appPlugins/ToolMilling.py:3950 appPlugins/ToolNCC.py:4057 appPlugins/ToolOptimal.py:477 #: appPlugins/ToolPaint.py:2940 appPlugins/ToolPanelize.py:1156 #: appPlugins/ToolPunchGerber.py:2023 appPlugins/ToolQRCode.py:754 #: appPlugins/ToolSolderPaste.py:1257 msgid "Source Object" msgstr "" #: appPlugins/ToolCopperThieving.py:1274 msgid "Gerber Object to which will be added a copper thieving." msgstr "" #: appPlugins/ToolCopperThieving.py:1305 msgid "" "This set the distance between the copper thieving components\n" "(the polygon fill may be split in multiple polygons)\n" "and the copper traces in the Gerber file." msgstr "" #: appPlugins/ToolCopperThieving.py:1369 msgid "" "The type of FlatCAM object to be used as copper thieving reference.\n" "It can be Gerber, Excellon or Geometry." msgstr "" #: appPlugins/ToolCopperThieving.py:1569 msgid "Insert Copper thieving" msgstr "" #: appPlugins/ToolCopperThieving.py:1572 msgid "" "Will add a polygon (may be split in multiple parts)\n" "that will surround the actual Gerber traces at a certain distance." msgstr "" #: appPlugins/ToolCopperThieving.py:1628 msgid "Insert Robber Bar" msgstr "" #: appPlugins/ToolCopperThieving.py:1631 msgid "" "Will add a polygon with a defined thickness\n" "that will surround the actual Gerber object\n" "at a certain distance.\n" "Required when doing holes pattern plating." msgstr "" #: appPlugins/ToolCopperThieving.py:1649 msgid "" "Gerber Object with the soldermask.\n" "It will be used as a base for\n" "the pattern plating mask." msgstr "" #: appPlugins/ToolCopperThieving.py:1692 msgid "Plated area" msgstr "" #: appPlugins/ToolCopperThieving.py:1694 msgid "" "The area to be plated by pattern plating.\n" "Basically is made from the openings in the plating mask.\n" "\n" "<> - the calculated area is actually a bit larger\n" "due of the fact that the soldermask openings are by design\n" "a bit larger than the copper pads, and this area is\n" "calculated from the soldermask openings." msgstr "" #: appPlugins/ToolCopperThieving.py:1735 msgid "Generate pattern plating mask" msgstr "" #: appPlugins/ToolCopperThieving.py:1738 msgid "" "Will add to the soldermask gerber geometry\n" "the geometries of the copper thieving and/or\n" "the robber bar if those were generated." msgstr "" #: appPlugins/ToolCutOut.py:411 appPlugins/ToolCutOut.py:2620 msgid "Any" msgstr "" #: appPlugins/ToolCutOut.py:441 appPlugins/ToolDrilling.py:1140 #: appPlugins/ToolIsolation.py:1349 appPlugins/ToolMilling.py:2075 msgid "Could not load Tools DB file." msgstr "" #: appPlugins/ToolCutOut.py:495 appPlugins/ToolIsolation.py:1401 #: appPlugins/ToolMilling.py:2129 appPlugins/ToolNCC.py:1257 appPlugins/ToolPaint.py:908 msgid "Tool not in Tools Database. Adding a default tool." msgstr "" #: appPlugins/ToolCutOut.py:502 appPlugins/ToolDrilling.py:1205 #: appPlugins/ToolIsolation.py:1407 appPlugins/ToolMilling.py:2137 #: appPlugins/ToolNCC.py:1264 appPlugins/ToolPaint.py:916 msgid "" "Cancelled.\n" "Multiple tools for one tool diameter found in Tools Database." msgstr "" #: appPlugins/ToolCutOut.py:521 msgid "Updated tool from Tools Database." msgstr "" #: appPlugins/ToolCutOut.py:547 msgid "Default tool added." msgstr "" #: appPlugins/ToolCutOut.py:583 msgid "Tool updated from Tools Database." msgstr "" #: appPlugins/ToolCutOut.py:647 appPlugins/ToolCutOut.py:1446 msgid "" "There is no object selected for Cutout.\n" "Select one and try again." msgstr "" #: appPlugins/ToolCutOut.py:653 appPlugins/ToolCutOut.py:1047 appPlugins/ToolCutOut.py:1549 #: tclCommands/TclCommandGeoCutout.py:181 msgid "Tool Diameter is zero value. Change it to a positive real number." msgstr "" #: appPlugins/ToolCutOut.py:666 appPlugins/ToolCutOut.py:1061 msgid "Number of gaps value is missing. Add it and retry." msgstr "" #: appPlugins/ToolCutOut.py:671 appPlugins/ToolCutOut.py:1065 msgid "" "Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8.\n" "Fill in a correct value and retry." msgstr "" #: appPlugins/ToolCutOut.py:914 appPlugins/ToolCutOut.py:1335 appPlugins/ToolCutOut.py:1901 msgid "Mouse bites failed." msgstr "" #: appPlugins/ToolCutOut.py:924 tclCommands/TclCommandGeoCutout.py:295 msgid "Any-form Cutout operation finished." msgstr "" #: appPlugins/ToolCutOut.py:1041 appPlugins/ToolDrilling.py:1942 #: appPlugins/ToolEtchCompensation.py:187 appPlugins/ToolFollow.py:198 #: appPlugins/ToolFollow.py:248 appPlugins/ToolInvertGerber.py:136 #: appPlugins/ToolIsolation.py:1166 appPlugins/ToolIsolation.py:1230 #: appPlugins/ToolIsolation.py:1598 appPlugins/ToolIsolation.py:1627 #: appPlugins/ToolIsolation.py:2608 appPlugins/ToolMilling.py:2719 #: appPlugins/ToolMilling.py:2742 appPlugins/ToolMilling.py:2907 appPlugins/ToolNCC.py:1003 #: appPlugins/ToolNCC.py:1072 appPlugins/ToolNCC.py:1517 appPlugins/ToolPaint.py:1138 #: appPlugins/ToolPanelize.py:309 tclCommands/TclCommandBbox.py:71 #: tclCommands/TclCommandNregions.py:71 msgid "Object not found" msgstr "" #: appPlugins/ToolCutOut.py:1183 appPlugins/ToolCutOut.py:1257 msgid "Rectangular cutout with negative margin is not possible." msgstr "" #: appPlugins/ToolCutOut.py:1344 msgid "Rectangular CutOut operation finished." msgstr "" #: appPlugins/ToolCutOut.py:1459 appPlugins/ToolCutOut.py:1477 appPlugins/ToolCutOut.py:1491 msgid "Could not add drills." msgstr "" #: appPlugins/ToolCutOut.py:1538 appPlugins/ToolCutOut.py:1608 msgid "Geometry object for manual cutout not found" msgstr "" #: appPlugins/ToolCutOut.py:1541 msgid "Click on the selected geometry object perimeter to create a bridge gap ..." msgstr "" #: appPlugins/ToolCutOut.py:1647 msgid "No tool in the Geometry object." msgstr "" #: appPlugins/ToolCutOut.py:1668 msgid "Added manual Bridge Gap. Left click to add another or right click to finish." msgstr "" #: appPlugins/ToolCutOut.py:1685 msgid "" "There is no Gerber object selected for Cutout.\n" "Select one and try again." msgstr "" #: appPlugins/ToolCutOut.py:1691 msgid "" "The selected object has to be of Gerber type.\n" "Select a Gerber file and try again." msgstr "" #: appPlugins/ToolCutOut.py:1737 msgid "Geometry not supported" msgstr "" #: appPlugins/ToolCutOut.py:1814 msgid "Making manual bridge gap..." msgstr "" #: appPlugins/ToolCutOut.py:1906 msgid "Finished manual adding of gaps." msgstr "" #: appPlugins/ToolCutOut.py:2263 msgid "" "Create a Geometry object with toolpaths\n" "for cutting out the object from the surrounding material." msgstr "" #: appPlugins/ToolCutOut.py:2282 msgid "Object to be cutout" msgstr "" #: appPlugins/ToolCutOut.py:2318 msgid "" "Specify the type of object to be cutout.\n" "It can be of type: Gerber or Geometry.\n" "What is selected here will dictate the kind\n" "of objects that will populate the 'Object' combobox." msgstr "" #: appPlugins/ToolCutOut.py:2335 msgid "Cutout Tool" msgstr "" #: appPlugins/ToolCutOut.py:2364 appPlugins/ToolIsolation.py:202 #: appPlugins/ToolIsolation.py:3513 appPlugins/ToolMilling.py:4214 #: appPlugins/ToolNCC.py:4229 appPlugins/ToolPaint.py:3091 msgid "Search and Add" msgstr "" #: appPlugins/ToolCutOut.py:2367 appPlugins/ToolIsolation.py:3516 #: appPlugins/ToolMilling.py:4217 appPlugins/ToolNCC.py:4232 appPlugins/ToolPaint.py:3094 msgid "" "Add a new tool to the Tool Table\n" "with the diameter specified above.\n" "This is done by a background search\n" "in the Tools Database. If nothing is found\n" "in the Tools DB then a default tool is added." msgstr "" #: appPlugins/ToolCutOut.py:2376 appPlugins/ToolIsolation.py:207 #: appPlugins/ToolIsolation.py:3525 appPlugins/ToolMilling.py:399 #: appPlugins/ToolMilling.py:4226 appPlugins/ToolNCC.py:4241 appPlugins/ToolPaint.py:3103 msgid "Pick from DB" msgstr "" #: appPlugins/ToolCutOut.py:2379 appPlugins/ToolIsolation.py:3528 #: appPlugins/ToolMilling.py:4229 appPlugins/ToolNCC.py:4244 appPlugins/ToolPaint.py:3106 msgid "" "Add a new tool to the Tool Table\n" "from the Tools Database.\n" "Tools database administration in in:\n" "Menu: Options -> Tools Database" msgstr "" #: appPlugins/ToolCutOut.py:2572 msgid "Selection of the type of cutout." msgstr "" #: appPlugins/ToolCutOut.py:2576 appPlugins/ToolPunchGerber.py:2332 msgid "Automatic" msgstr "" #: appPlugins/ToolCutOut.py:2617 msgid "" "Checked: the cutout shape is rectangular.\n" "Unchecked: any-form cutout shape." msgstr "" #: appPlugins/ToolCutOut.py:2657 msgid "Manual cutout Geometry" msgstr "" #: appPlugins/ToolCutOut.py:2659 appPlugins/ToolCutOut.py:2731 msgid "Geometry object used to create the manual cutout." msgstr "" #: appPlugins/ToolCutOut.py:2674 msgid "Manual Geometry" msgstr "" #: appPlugins/ToolCutOut.py:2677 msgid "Generate a Geometry to be used as cutout." msgstr "" #: appPlugins/ToolCutOut.py:2692 msgid "" "Add new gaps on the selected Geometry object\n" "by clicking mouse left button on the Geometry outline." msgstr "" #: appPlugins/ToolCutOut.py:2702 msgid "Generate the cutout geometry." msgstr "" #: appPlugins/ToolDblSided.py:292 msgid "'Point' reference is selected and 'Point' coordinates are missing." msgstr "" #: appPlugins/ToolDblSided.py:301 msgid "Box reference object is missing." msgstr "" #: appPlugins/ToolDblSided.py:309 msgid "Not supported." msgstr "" #: appPlugins/ToolDblSided.py:315 msgid "Drill diameter is missing." msgstr "" #: appPlugins/ToolDblSided.py:322 msgid "Alignment drill coordinates are missing." msgstr "" #: appPlugins/ToolDblSided.py:357 msgid "Alignment Drills" msgstr "" #: appPlugins/ToolDblSided.py:361 msgid "Excellon object with alignment drills created..." msgstr "" #: appPlugins/ToolDblSided.py:372 appPlugins/ToolPunchGerber.py:564 #: appPlugins/ToolPunchGerber.py:602 appPlugins/ToolPunchGerber.py:707 msgid "There is no Excellon object loaded ..." msgstr "" #: appPlugins/ToolDblSided.py:388 msgid "Click on canvas within the desired Excellon drill hole" msgstr "" #: appPlugins/ToolDblSided.py:432 msgid "Mirror reference point set." msgstr "" #: appPlugins/ToolDblSided.py:502 msgid "Only Gerber, Excellon and Geometry objects can be mirrored." msgstr "" #: appPlugins/ToolDblSided.py:514 msgid "There is no Box object loaded ..." msgstr "" #: appPlugins/ToolDblSided.py:524 msgid "There are no Point coordinates in the Point field. Add coords and try again ..." msgstr "" #: appPlugins/ToolDblSided.py:531 camlib.py:2462 msgid "Object was mirrored" msgstr "" #: appPlugins/ToolDblSided.py:694 appPlugins/ToolNCC.py:4035 msgid "" "Create a Geometry object with\n" "toolpaths to cover the space outside the copper pattern." msgstr "" #: appPlugins/ToolDblSided.py:717 msgid "Objects to be mirrored" msgstr "" #: appPlugins/ToolDblSided.py:730 msgid "Select the type of application object to be processed in this tool." msgstr "" #: appPlugins/ToolDblSided.py:749 msgid "Bounds Values" msgstr "" #: appPlugins/ToolDblSided.py:751 msgid "" "Select on canvas the object(s)\n" "for which to calculate bounds values." msgstr "" #: appPlugins/ToolDblSided.py:767 msgid "X min" msgstr "" #: appPlugins/ToolDblSided.py:769 appPlugins/ToolDblSided.py:783 msgid "Minimum location." msgstr "" #: appPlugins/ToolDblSided.py:781 msgid "Y min" msgstr "" #: appPlugins/ToolDblSided.py:795 msgid "X max" msgstr "" #: appPlugins/ToolDblSided.py:797 appPlugins/ToolDblSided.py:811 msgid "Maximum location." msgstr "" #: appPlugins/ToolDblSided.py:809 msgid "Y max" msgstr "" #: appPlugins/ToolDblSided.py:820 msgid "Center point coordinates" msgstr "" #: appPlugins/ToolDblSided.py:822 msgid "Centroid" msgstr "" #: appPlugins/ToolDblSided.py:824 msgid "" "The center point location for the rectangular\n" "bounding shape. Centroid. Format is (x, y)." msgstr "" #: appPlugins/ToolDblSided.py:833 msgid "Calculate Bounds Values" msgstr "" #: appPlugins/ToolDblSided.py:835 msgid "" "Calculate the enveloping rectangular shape coordinates,\n" "for the selection of objects.\n" "The envelope shape is parallel with the X, Y axis." msgstr "" #: appPlugins/ToolDblSided.py:845 msgid "Parameters for the mirror operation" msgstr "" #: appPlugins/ToolDblSided.py:908 msgid "Point coordinates" msgstr "" #: appPlugins/ToolDblSided.py:920 msgid "" "Add the coordinates in format (x, y) through which the mirroring axis\n" " selected in 'MIRROR AXIS' pass.\n" "The (x, y) coordinates are captured by pressing SHIFT key\n" "and left mouse button click on canvas or you can enter the coordinates manually." msgstr "" #: appPlugins/ToolDblSided.py:945 msgid "" "It can be of type: Gerber or Excellon or Geometry.\n" "The coordinates of the center of the bounding box are used\n" "as reference for mirror operation." msgstr "" #: appPlugins/ToolDblSided.py:972 msgid "Object that holds holes that can be picked as reference for mirroring." msgstr "" #: appPlugins/ToolDblSided.py:984 msgid "Pick hole" msgstr "" #: appPlugins/ToolDblSided.py:986 msgid "" "Click inside a drill hole that belong to the selected Excellon object,\n" "and the hole center coordinates will be copied to the Point field." msgstr "" #: appPlugins/ToolDblSided.py:998 msgid "" "Mirrors (flips) the specified object around \n" "the specified axis. Does not create a new \n" "object, but modifies it." msgstr "" #: appPlugins/ToolDblSided.py:1010 appPlugins/ToolDblSided.py:1112 msgid "" "Creates an Excellon Object containing the\n" "specified alignment holes and their mirror\n" "images." msgstr "" #: appPlugins/ToolDblSided.py:1061 appPlugins/ToolDblSided.py:1068 msgid "" "The reference point used to create the second alignment drill\n" "from the first alignment drill, by doing mirror.\n" "It can be modified in the Mirror Parameters -> Reference section" msgstr "" #: appPlugins/ToolDblSided.py:1078 msgid "Drill Coordinates" msgstr "" #: appPlugins/ToolDblSided.py:1080 msgid "" "Alignment holes (x1, y1), (x2, y2), ... \n" "If the type is X or Y then for each pair of coordinates\n" "two drill points will be added: one with the given coordinates,\n" "and the other will be mirrored as set in the 'Mirror' section.\n" "If the type is 'Manual' then no mirror point is generated.\n" "\n" "Shift + mouse click will add one set of coordinates.\n" "Ctrl + Shift + mouse click will accumulate sets of coordinates. " msgstr "" #: appPlugins/ToolDblSided.py:1093 msgid "Drill coordinates" msgstr "" #: appPlugins/ToolDblSided.py:1098 msgid "Delete the last coordinates tuple in the list." msgstr "" #: appPlugins/ToolDblSided.py:1109 appPlugins/ToolMarkers.py:1516 #: appPlugins/ToolMarkers.py:1530 msgid "Create Excellon Object" msgstr "" #: appPlugins/ToolDistance.py:263 msgid "MEASURING: Click on the Start point ..." msgstr "" #: appPlugins/ToolDistance.py:353 appPlugins/ToolDistance.py:987 #: appPlugins/ToolObjectDistance.py:600 msgid "Measure" msgstr "" #: appPlugins/ToolDistance.py:425 msgid "Click to add next point or right click to finish." msgstr "" #: appPlugins/ToolDistance.py:472 msgid "Pads overlapped. Aborting." msgstr "" #: appPlugins/ToolDistance.py:841 msgid "Snap to center" msgstr "" #: appPlugins/ToolDistance.py:843 msgid "" "Mouse cursor will snap to the center of the pad/drill\n" "when it is hovering over the geometry of the pad/drill." msgstr "" #: appPlugins/ToolDistance.py:848 msgid "Multi-Point" msgstr "" #: appPlugins/ToolDistance.py:850 msgid "Make a measurement over multiple distance segments." msgstr "" #: appPlugins/ToolDistance.py:857 appPlugins/ToolFiducials.py:1168 #: appPlugins/ToolMarkers.py:1464 msgid "Use a big cursor." msgstr "" #: appPlugins/ToolDistance.py:878 appPlugins/ToolObjectDistance.py:491 msgid "Start point" msgstr "" #: appPlugins/ToolDistance.py:879 appPlugins/ToolDistance.py:884 #: appPlugins/ToolObjectDistance.py:492 appPlugins/ToolObjectDistance.py:497 msgid "This is measuring Start point coordinates." msgstr "" #: appPlugins/ToolDistance.py:891 appPlugins/ToolObjectDistance.py:504 msgid "End point" msgstr "" #: appPlugins/ToolDistance.py:892 appPlugins/ToolDistance.py:897 #: appPlugins/ToolObjectDistance.py:505 appPlugins/ToolObjectDistance.py:510 msgid "This is the measuring Stop point coordinates." msgstr "" #: appPlugins/ToolDistance.py:906 appPlugins/ToolObjectDistance.py:519 msgid "Results" msgstr "" #: appPlugins/ToolDistance.py:916 appPlugins/ToolObjectDistance.py:529 msgid "Dx" msgstr "" #: appPlugins/ToolDistance.py:917 appPlugins/ToolDistance.py:922 #: appPlugins/ToolObjectDistance.py:530 appPlugins/ToolObjectDistance.py:535 msgid "This is the distance measured over the X axis." msgstr "" #: appPlugins/ToolDistance.py:929 appPlugins/ToolObjectDistance.py:542 msgid "Dy" msgstr "" #: appPlugins/ToolDistance.py:930 appPlugins/ToolDistance.py:935 #: appPlugins/ToolObjectDistance.py:543 appPlugins/ToolObjectDistance.py:548 msgid "This is the distance measured over the Y axis." msgstr "" #: appPlugins/ToolDistance.py:943 appPlugins/ToolDistance.py:948 #: appPlugins/ToolDistance.py:956 appPlugins/ToolDistance.py:961 #: appPlugins/ToolObjectDistance.py:556 appPlugins/ToolObjectDistance.py:561 msgid "This is orientation angle of the measuring line." msgstr "" #: appPlugins/ToolDistance.py:973 appPlugins/ToolObjectDistance.py:573 msgid "DISTANCE" msgstr "" #: appPlugins/ToolDistance.py:974 appPlugins/ToolDistance.py:980 #: appPlugins/ToolObjectDistance.py:574 appPlugins/ToolObjectDistance.py:580 msgid "This is the point to point Euclidian distance." msgstr "" #: appPlugins/ToolDrilling.py:287 appPlugins/ToolMilling.py:413 msgid "coords" msgstr "" #: appPlugins/ToolDrilling.py:902 appPlugins/ToolDrilling.py:908 #: appPlugins/ToolDrilling.py:953 appPlugins/ToolDrilling.py:1233 #: appPlugins/ToolDrilling.py:1240 appPlugins/ToolDrilling.py:1272 #: appPlugins/ToolDrilling.py:1285 appPlugins/ToolDrilling.py:1289 #: appPlugins/ToolDrilling.py:2486 appPlugins/ToolIsolation.py:648 #: appPlugins/ToolIsolation.py:842 appPlugins/ToolIsolation.py:847 #: appPlugins/ToolIsolation.py:877 appPlugins/ToolIsolation.py:902 #: appPlugins/ToolIsolation.py:915 appPlugins/ToolIsolation.py:3551 #: appPlugins/ToolMilling.py:968 appPlugins/ToolMilling.py:1087 #: appPlugins/ToolMilling.py:1648 appPlugins/ToolMilling.py:1656 #: appPlugins/ToolMilling.py:1660 appPlugins/ToolMilling.py:1717 #: appPlugins/ToolMilling.py:1729 appPlugins/ToolMilling.py:1733 #: appPlugins/ToolMilling.py:4254 appPlugins/ToolNCC.py:534 appPlugins/ToolNCC.py:539 #: appPlugins/ToolNCC.py:569 appPlugins/ToolNCC.py:592 appPlugins/ToolNCC.py:605 #: appPlugins/ToolNCC.py:821 appPlugins/ToolNCC.py:4266 appPlugins/ToolPaint.py:493 #: appPlugins/ToolPaint.py:498 appPlugins/ToolPaint.py:547 appPlugins/ToolPaint.py:569 #: appPlugins/ToolPaint.py:581 appPlugins/ToolPaint.py:798 appPlugins/ToolPaint.py:3128 msgid "Parameters for" msgstr "" #: appPlugins/ToolDrilling.py:902 appPlugins/ToolDrilling.py:1240 #: appPlugins/ToolDrilling.py:1289 appPlugins/ToolIsolation.py:648 #: appPlugins/ToolIsolation.py:847 appPlugins/ToolIsolation.py:915 #: appPlugins/ToolMilling.py:968 appPlugins/ToolMilling.py:1087 #: appPlugins/ToolMilling.py:1660 appPlugins/ToolMilling.py:1733 appPlugins/ToolNCC.py:539 #: appPlugins/ToolNCC.py:605 appPlugins/ToolNCC.py:821 appPlugins/ToolPaint.py:498 #: appPlugins/ToolPaint.py:581 appPlugins/ToolPaint.py:798 msgid "Multiple Tools" msgstr "" #: appPlugins/ToolDrilling.py:1451 appPlugins/ToolIsolation.py:983 #: appPlugins/ToolMilling.py:2030 appPlugins/ToolNCC.py:712 appPlugins/ToolPaint.py:646 msgid "Current Tool parameters were applied to all tools." msgstr "" #: appPlugins/ToolDrilling.py:1513 appPlugins/ToolMilling.py:3555 msgid "Focus Z" msgstr "" #: appPlugins/ToolDrilling.py:1535 appPlugins/ToolMilling.py:3577 msgid "Laser Power" msgstr "" #: appPlugins/ToolDrilling.py:1537 appPlugins/ToolMilling.py:3579 msgid "The laser power when the laser is cutting." msgstr "" #: appPlugins/ToolDrilling.py:1656 appPlugins/ToolMilling.py:3742 msgid "Delete failed. There are no exclusion areas to delete." msgstr "" #: appPlugins/ToolDrilling.py:1673 appPlugins/ToolMilling.py:3759 msgid "Delete failed. Nothing is selected." msgstr "" #: appPlugins/ToolDrilling.py:1690 appPlugins/ToolMilling.py:3776 msgid "Only one selected row is allowed." msgstr "" #: appPlugins/ToolDrilling.py:1791 appPlugins/ToolDrilling.py:1806 #: appPlugins/ToolMilling.py:3877 appPlugins/ToolMilling.py:3892 msgid "Value edited in Exclusion Table." msgstr "" #: appPlugins/ToolDrilling.py:1960 camlib.py:4317 msgid "The loaded Excellon file has no drills" msgstr "" #: appPlugins/ToolDrilling.py:2006 camlib.py:4237 msgid "Creating a list of points to drill..." msgstr "" #: appPlugins/ToolDrilling.py:2013 msgid "Drill points inside the exclusion zones." msgstr "" #: appPlugins/ToolDrilling.py:2029 camlib.py:4307 camlib.py:5106 camlib.py:5545 msgid "Starting G-Code" msgstr "" #: appPlugins/ToolDrilling.py:2034 msgid "Generating CNCJob..." msgstr "" #: appPlugins/ToolDrilling.py:2185 camlib.py:3381 camlib.py:3888 camlib.py:5402 msgid "The Toolchange X,Y format has to be (x, y)." msgstr "" #: appPlugins/ToolDrilling.py:2336 msgid "Generating CNC Code" msgstr "" #: appPlugins/ToolDrilling.py:2398 appPlugins/ToolFilm.py:1265 msgid "Excellon object for drilling/milling operation." msgstr "" #: appPlugins/ToolDrilling.py:2426 msgid "Tools in the object used for drilling." msgstr "" #: appPlugins/ToolDrilling.py:2473 msgid "Search DB" msgstr "" #: appPlugins/ToolDrilling.py:2476 msgid "" "Will search and try to replace the tools from Tools Table\n" "with tools from DB that have a close diameter value." msgstr "" #: appPlugins/ToolDrilling.py:2489 appPlugins/ToolIsolation.py:3554 #: appPlugins/ToolMilling.py:4257 appPlugins/ToolNCC.py:4268 appPlugins/ToolPaint.py:3131 msgid "" "The data used for creating GCode.\n" "Each tool store it's own set of such data." msgstr "" #: appPlugins/ToolDrilling.py:2728 appPlugins/ToolIsolation.py:3754 #: appPlugins/ToolMilling.py:4754 appPlugins/ToolNCC.py:4428 appPlugins/ToolPaint.py:3225 msgid "Apply parameters to all tools" msgstr "" #: appPlugins/ToolDrilling.py:2731 appPlugins/ToolIsolation.py:3757 #: appPlugins/ToolMilling.py:4757 appPlugins/ToolNCC.py:4431 appPlugins/ToolPaint.py:3228 msgid "" "The parameters in the current form will be applied\n" "on all the tools from the Tool Table." msgstr "" #: appPlugins/ToolDrilling.py:2753 appPlugins/ToolMilling.py:4779 msgid "Tool change Z" msgstr "" #: appPlugins/ToolDrilling.py:2829 appPlugins/ToolMilling.py:4842 msgid "X,Y coordinates" msgstr "" #: appPlugins/ToolDrilling.py:2875 msgid "" "The preprocessor JSON file that dictates\n" "Gcode output for Excellon Objects." msgstr "" #: appPlugins/ToolDrilling.py:2890 appPlugins/ToolMilling.py:4949 msgid "Add exclusion areas" msgstr "" #: appPlugins/ToolDrilling.py:2917 appPlugins/ToolMilling.py:4977 msgid "This is the Area ID." msgstr "" #: appPlugins/ToolDrilling.py:2919 appPlugins/ToolMilling.py:4979 msgid "Type of the object where the exclusion area was added." msgstr "" #: appPlugins/ToolDrilling.py:2921 appPlugins/ToolMilling.py:4981 msgid "The strategy used for exclusion area. Go around the exclusion areas or over it." msgstr "" #: appPlugins/ToolDrilling.py:2923 appPlugins/ToolMilling.py:4983 msgid "" "If the strategy is to go over the area then this is the height at which the tool will go " "to avoid the exclusion area." msgstr "" #: appPlugins/ToolDrilling.py:2957 appPlugins/ToolMilling.py:5017 msgid "Add Area:" msgstr "" #: appPlugins/ToolDrilling.py:2958 appPlugins/ToolMilling.py:5018 msgid "Add an Exclusion Area." msgstr "" #: appPlugins/ToolDrilling.py:2976 appPlugins/ToolMilling.py:5036 msgid "Delete all exclusion areas." msgstr "" #: appPlugins/ToolDrilling.py:2979 appPlugins/ToolMilling.py:5039 msgid "Delete Selected" msgstr "" #: appPlugins/ToolDrilling.py:2980 appPlugins/ToolMilling.py:5040 msgid "Delete all exclusion areas that are selected in the table." msgstr "" #: appPlugins/ToolDrilling.py:2996 appPlugins/ToolMilling.py:5055 msgid "Generate CNCJob object" msgstr "" #: appPlugins/ToolDrilling.py:2999 appPlugins/ToolMilling.py:5058 msgid "" "Generate the CNC Job.\n" "If milling then an additional Geometry object will be created.\n" "Add / Select at least one tool in the tool-table.\n" "Click the # header to select all, or Ctrl + LMB\n" "for custom selection of tools." msgstr "" #: appPlugins/ToolEtchCompensation.py:90 appPlugins/ToolEtchCompensation.py:288 msgid "Etch Compensation" msgstr "" #: appPlugins/ToolEtchCompensation.py:193 appPlugins/ToolEtchCompensation.py:207 msgid "Missing parameter value." msgstr "" #: appPlugins/ToolEtchCompensation.py:311 msgid "Gerber object that will be compensated." msgstr "" #: appPlugins/ToolEtchCompensation.py:328 msgid "Conversion utilities" msgstr "" #: appPlugins/ToolEtchCompensation.py:339 msgid "Oz to Microns" msgstr "" #: appPlugins/ToolEtchCompensation.py:341 msgid "" "Will convert from oz thickness to microns [um].\n" "Can use formulas with operators: /, *, +, -, %, .\n" "The real numbers use the dot decimals separator." msgstr "" #: appPlugins/ToolEtchCompensation.py:350 msgid "Oz value" msgstr "" #: appPlugins/ToolEtchCompensation.py:352 appPlugins/ToolEtchCompensation.py:374 msgid "Microns value" msgstr "" #: appPlugins/ToolEtchCompensation.py:361 msgid "Mils to Microns" msgstr "" #: appPlugins/ToolEtchCompensation.py:363 msgid "" "Will convert from mils to microns [um].\n" "Can use formulas with operators: /, *, +, -, %, .\n" "The real numbers use the dot decimals separator." msgstr "" #: appPlugins/ToolEtchCompensation.py:372 msgid "Mils value" msgstr "" #: appPlugins/ToolEtchCompensation.py:396 msgid "Copper Thickness" msgstr "" #: appPlugins/ToolEtchCompensation.py:398 msgid "" "The thickness of the copper foil.\n" "In microns [um]." msgstr "" #: appPlugins/ToolEtchCompensation.py:408 appPlugins/ToolImage.py:825 msgid "Ratio" msgstr "" #: appPlugins/ToolEtchCompensation.py:410 msgid "" "The ratio of lateral etch versus depth etch.\n" "Can be:\n" "- custom -> the user will enter a custom value\n" "- preselection -> value which depends on a selection of etchants" msgstr "" #: appPlugins/ToolEtchCompensation.py:416 appPlugins/ToolEtchCompensation.py:441 msgid "Etch Factor" msgstr "" #: appPlugins/ToolEtchCompensation.py:417 msgid "Etchants list" msgstr "" #: appPlugins/ToolEtchCompensation.py:418 msgid "Manual offset" msgstr "" #: appPlugins/ToolEtchCompensation.py:430 msgid "Etchants" msgstr "" #: appPlugins/ToolEtchCompensation.py:432 msgid "A list of etchants." msgstr "" #: appPlugins/ToolEtchCompensation.py:435 msgid "Alkaline baths" msgstr "" #: appPlugins/ToolEtchCompensation.py:443 msgid "" "The ratio between depth etch and lateral etch .\n" "Accepts real numbers and formulas using the operators: /,*,+,-,%" msgstr "" #: appPlugins/ToolEtchCompensation.py:447 msgid "Real number or formula" msgstr "" #: appPlugins/ToolEtchCompensation.py:455 msgid "" "Value with which to increase or decrease (buffer)\n" "the copper features. In microns [um]." msgstr "" #: appPlugins/ToolEtchCompensation.py:476 msgid "Compensate" msgstr "" #: appPlugins/ToolEtchCompensation.py:479 msgid "Will increase the copper features thickness to compensate the lateral etch." msgstr "" #: appPlugins/ToolExtract.py:410 msgid "extracted" msgstr "" #: appPlugins/ToolExtract.py:488 appPlugins/ToolExtract.py:593 appPlugins/ToolExtract.py:693 msgid "No drills extracted. Try different parameters." msgstr "" #: appPlugins/ToolExtract.py:790 msgid "No soldermask extracted." msgstr "" #: appPlugins/ToolExtract.py:839 appPlugins/ToolExtract.py:848 appPlugins/ToolExtract.py:852 msgid "No cutout extracted." msgstr "" #: appPlugins/ToolExtract.py:1009 msgid "Gerber object from which to extract drill holes or soldermask." msgstr "" #: appPlugins/ToolExtract.py:1051 appPlugins/ToolPunchGerber.py:2064 msgid "Process all Pads." msgstr "" #: appPlugins/ToolExtract.py:1129 appPlugins/ToolExtract.py:1317 msgid "Extract Drills" msgstr "" #: appPlugins/ToolExtract.py:1131 msgid "Extract an Excellon object from the Gerber pads." msgstr "" #: appPlugins/ToolExtract.py:1320 msgid "Extract drills from a given Gerber file." msgstr "" #: appPlugins/ToolFiducials.py:357 msgid "Click to add first Fiducial. Bottom Left..." msgstr "" #: appPlugins/ToolFiducials.py:665 msgid "Click to add the last fiducial. Top Right..." msgstr "" #: appPlugins/ToolFiducials.py:670 msgid "Click to add the second fiducial. Top Left or Bottom Right..." msgstr "" #: appPlugins/ToolFiducials.py:829 msgid "Fiducials Tool exit." msgstr "" #: appPlugins/ToolFiducials.py:935 msgid "Gerber object for adding fiducials and soldermask openings." msgstr "" #: appPlugins/ToolFiducials.py:952 msgid "" "A table with the fiducial points coordinates,\n" "in the format (x, y)." msgstr "" #: appPlugins/ToolFiducials.py:990 appPlugins/ToolMarkers.py:1416 msgid "Top Right" msgstr "" #: appPlugins/ToolFiducials.py:1124 msgid "Thickness of the line that makes the fiducial." msgstr "" #: appPlugins/ToolFiducials.py:1157 msgid "Mode:" msgstr "" #: appPlugins/ToolFiducials.py:1174 msgid "Add Fiducial" msgstr "" #: appPlugins/ToolFiducials.py:1177 msgid "Will add a polygon on the copper layer to serve as fiducial." msgstr "" #: appPlugins/ToolFiducials.py:1182 msgid "Add Soldermask Opening" msgstr "" #: appPlugins/ToolFiducials.py:1184 msgid "" "Will add a polygon on the soldermask layer\n" "to serve as fiducial opening.\n" "The diameter is always double of the diameter\n" "for the copper fiducial." msgstr "" #: appPlugins/ToolFilm.py:302 msgid "Load an object for Film and retry." msgstr "" #: appPlugins/ToolFilm.py:309 msgid "Load an object for Box and retry." msgstr "" #: appPlugins/ToolFilm.py:324 msgid "Generating Film ..." msgstr "" #: appPlugins/ToolFilm.py:387 appPlugins/ToolFilm.py:392 msgid "Export positive film" msgstr "" #: appPlugins/ToolFilm.py:424 msgid "No Excellon object selected. Load an object for punching reference and retry." msgstr "" #: appPlugins/ToolFilm.py:448 appPlugins/ToolFilm.py:460 appPlugins/ToolPunchGerber.py:826 #: appPlugins/ToolPunchGerber.py:959 msgid "Failed. Punch hole size is bigger than some of the apertures in the Gerber object." msgstr "" #: appPlugins/ToolFilm.py:478 appPlugins/ToolPunchGerber.py:899 #: appPlugins/ToolPunchGerber.py:994 msgid "" "Failed. The new object geometry is the same as the one in the source object geometry..." msgstr "" #: appPlugins/ToolFilm.py:550 appPlugins/ToolFilm.py:555 msgid "Export negative film" msgstr "" #: appPlugins/ToolFilm.py:632 appPlugins/ToolFilm.py:854 appPlugins/ToolPanelize.py:322 msgid "No object Box. Using instead" msgstr "" #: appPlugins/ToolFilm.py:688 appPlugins/ToolFilm.py:911 msgid "Film file exported to" msgstr "" #: appPlugins/ToolFilm.py:1020 msgid "" "The artwork has to be within the selected page size in order to be visible.\n" "For 'Bounds' page size, it needs to be in the first quadrant." msgstr "" #: appPlugins/ToolFilm.py:1281 msgid "" "Specify the type of object for which to create the film.\n" "The object can be of type: Gerber or Geometry.\n" "The selection here decide the type of objects that will be\n" "in the Film Object combobox." msgstr "" #: appPlugins/ToolFilm.py:1304 msgid "" "Specify the type of object to be used as an container for\n" "film creation. It can be: Gerber or Geometry type.The selection here decide the type of " "objects that will be\n" "in the Box Object combobox." msgstr "" #: appPlugins/ToolFilm.py:1422 msgid "" "'Length' -> deform by a length value\n" "'Angle' -> deform by an angle\n" "'Ratio' -> deform by a ratio between what should be and what is" msgstr "" #: appPlugins/ToolFilm.py:1592 msgid "Punch drill holes" msgstr "" #: appPlugins/ToolFilm.py:1593 msgid "" "When checked the generated film will have holes in pads when\n" "the generated film is positive. This is done to help drilling,\n" "when done manually." msgstr "" #: appPlugins/ToolFilm.py:1609 msgid "Source" msgstr "" #: appPlugins/ToolFilm.py:1611 msgid "" "The punch hole source can be:\n" "- Excellon -> an Excellon holes center will serve as reference.\n" "- Pad Center -> will try to use the pads center as reference." msgstr "" #: appPlugins/ToolFilm.py:1616 msgid "Pad center" msgstr "" #: appPlugins/ToolFilm.py:1623 msgid "Remove the geometry of Excellon from the Film to create the holes in pads." msgstr "" #: appPlugins/ToolFilm.py:1634 msgid "Punch Size" msgstr "" #: appPlugins/ToolFilm.py:1635 msgid "The value here will control how big is the punch hole in the pads." msgstr "" #: appPlugins/ToolFilm.py:1774 msgid "Save Film" msgstr "" #: appPlugins/ToolFilm.py:1777 msgid "" "Create a Film for the selected object, within\n" "the specified box. Does not create a new \n" " FlatCAM object, but directly save it in the\n" "selected format." msgstr "" #: appPlugins/ToolFilm.py:1845 msgid "" "Using the Pad center does not work on Geometry objects. Only a Gerber object has pads." msgstr "" #: appPlugins/ToolFollow.py:320 appPlugins/ToolFollow.py:388 msgid "Failed to create Follow Geometry." msgstr "" #: appPlugins/ToolFollow.py:670 msgid "" "Create a Geometry object with\n" "toolpaths to cut through the middle of polygons." msgstr "" #: appPlugins/ToolFollow.py:693 msgid "" "A Gerber object to be followed.\n" "Create a Geometry object with a path\n" "following the Gerber traces." msgstr "" #: appPlugins/ToolFollow.py:722 msgid "" "Selection of area to be processed.\n" "- 'All Polygons' - the process will start after click.\n" "- 'Area Selection' - left mouse click to start selection of the area to be processed." msgstr "" #: appPlugins/ToolImage.py:91 appPlugins/ToolImage.py:511 msgid "Image Import" msgstr "" #: appPlugins/ToolImage.py:161 msgid "Import warning" msgstr "" #: appPlugins/ToolImage.py:162 msgid "" "The tracing require Chromium,\n" "but it was not detected.\n" "\n" "Do you want to download it (about 300MB)?" msgstr "" #: appPlugins/ToolImage.py:182 msgid "" "Please be patient. Chromium is being downloaded in the background.\n" "The app will resume after it is installed." msgstr "" #: appPlugins/ToolImage.py:191 appPlugins/ToolImage.py:194 msgid "Import IMAGE" msgstr "" #: appPlugins/ToolImage.py:257 msgid "Only Geometry and Gerber objects are supported" msgstr "" #: appPlugins/ToolImage.py:535 appPlugins/ToolReport.py:192 msgid "Object Type" msgstr "" #: appPlugins/ToolImage.py:537 msgid "" "Specify the type of object to create from the image.\n" "It can be of type: Gerber or Geometry." msgstr "" #: appPlugins/ToolImage.py:553 msgid "DPI value" msgstr "" #: appPlugins/ToolImage.py:554 msgid "Specify a DPI value for the image." msgstr "" #: appPlugins/ToolImage.py:559 msgid "Area:" msgstr "" #: appPlugins/ToolImage.py:561 msgid "Polygons inside the image with less area are discarded." msgstr "" #: appPlugins/ToolImage.py:577 appPlugins/ToolImage.py:595 msgid "" "Choose a method for the image interpretation.\n" "B/W means a black & white image. Color means a colored image." msgstr "" #: appPlugins/ToolImage.py:615 msgid "Level of detail" msgstr "" #: appPlugins/ToolImage.py:622 appPlugins/ToolImage.py:638 appPlugins/ToolImage.py:652 #: appPlugins/ToolImage.py:666 msgid "Mask value" msgstr "" #: appPlugins/ToolImage.py:624 msgid "" "Mask for monochrome image.\n" "Takes values between [0 ... 255].\n" "Decides the level of details to include\n" "in the resulting geometry.\n" "0 means no detail and 255 means everything \n" "(which is totally black)." msgstr "" #: appPlugins/ToolImage.py:640 msgid "" "Mask for RED color.\n" "Takes values between [0 ... 255].\n" "Decides the level of details to include\n" "in the resulting geometry." msgstr "" #: appPlugins/ToolImage.py:654 msgid "" "Mask for GREEN color.\n" "Takes values between [0 ... 255].\n" "Decides the level of details to include\n" "in the resulting geometry." msgstr "" #: appPlugins/ToolImage.py:668 msgid "" "Mask for BLUE color.\n" "Takes values between [0 ... 255].\n" "Decides the level of details to include\n" "in the resulting geometry." msgstr "" #: appPlugins/ToolImage.py:687 appPlugins/ToolLevelling.py:1125 #: appPlugins/ToolLevelling.py:1147 appPlugins/ToolLevelling.py:2003 #: appPlugins/ToolLevelling.py:2018 msgid "Control" msgstr "" #: appPlugins/ToolImage.py:689 msgid "Tracing control." msgstr "" #: appPlugins/ToolImage.py:693 appPlugins/ToolImage.py:712 msgid "Presets" msgstr "" #: appPlugins/ToolImage.py:714 msgid "Options presets to control the tracing." msgstr "" #: appPlugins/ToolImage.py:738 msgid "Error Threshold" msgstr "" #: appPlugins/ToolImage.py:740 msgid "Error threshold for straight lines and quadratic splines." msgstr "" #: appPlugins/ToolImage.py:755 msgid "Splines" msgstr "" #: appPlugins/ToolImage.py:765 msgid "Enhance R Angle" msgstr "" #: appPlugins/ToolImage.py:767 msgid "Enhance right angle corners." msgstr "" #: appPlugins/ToolImage.py:777 msgid "Noise Reduction" msgstr "" #: appPlugins/ToolImage.py:781 msgid "Path Omit" msgstr "" #: appPlugins/ToolImage.py:783 msgid "Edge node paths shorter than this will be discarded for noise reduction." msgstr "" #: appPlugins/ToolImage.py:793 msgid "Line Filter" msgstr "" #: appPlugins/ToolImage.py:806 msgid "Sampling" msgstr "" #: appPlugins/ToolImage.py:808 msgid "Palette" msgstr "" #: appPlugins/ToolImage.py:808 msgid "Random" msgstr "" #: appPlugins/ToolImage.py:808 msgid "Deterministic" msgstr "" #: appPlugins/ToolImage.py:815 msgid "Number of colors to use on palette." msgstr "" #: appPlugins/ToolImage.py:827 msgid "" "Color quantization will randomize a color if fewer pixels than (total pixels * ratio) has " "it." msgstr "" #: appPlugins/ToolImage.py:837 msgid "Cycles" msgstr "" #: appPlugins/ToolImage.py:839 msgid "Color quantization will be repeated this many times." msgstr "" #: appPlugins/ToolImage.py:858 msgid "Stroke" msgstr "" #: appPlugins/ToolImage.py:860 msgid "Width of the stroke to be applied to the shape." msgstr "" #: appPlugins/ToolImage.py:871 msgid "Rounding" msgstr "" #: appPlugins/ToolImage.py:873 msgid "Rounding coordinates to a given decimal place." msgstr "" #: appPlugins/ToolImage.py:888 msgid "Blur" msgstr "" #: appPlugins/ToolImage.py:894 msgid "Selective Gaussian blur preprocessing." msgstr "" #: appPlugins/ToolImage.py:904 msgid "Delta" msgstr "" #: appPlugins/ToolImage.py:906 msgid "RGBA delta threshold for selective Gaussian blur preprocessing." msgstr "" #: appPlugins/ToolImage.py:919 msgid "Import image" msgstr "" #: appPlugins/ToolImage.py:922 msgid "Open a image of raster type and then import it in FlatCAM." msgstr "" #: appPlugins/ToolInvertGerber.py:217 msgid "Gerber object that will be inverted." msgstr "" #: appPlugins/ToolInvertGerber.py:238 msgid "Parameters for this tool" msgstr "" #: appPlugins/ToolInvertGerber.py:285 msgid "" "Will invert the Gerber object: areas that have copper\n" "will be empty of copper and previous empty area will be\n" "filled with copper." msgstr "" #: appPlugins/ToolIsolation.py:1119 appPlugins/ToolIsolation.py:1258 #: appPlugins/ToolNCC.py:957 appPlugins/ToolNCC.py:1101 appPlugins/ToolOptimal.py:249 msgid "" "The Gerber object has one Polygon as geometry.\n" "There are no distances between geometry elements to be found." msgstr "" #: appPlugins/ToolIsolation.py:1153 appPlugins/ToolIsolation.py:1217 #: appPlugins/ToolNCC.py:990 appPlugins/ToolNCC.py:1059 msgid "Checking tools for validity." msgstr "" #: appPlugins/ToolIsolation.py:1170 appPlugins/ToolIsolation.py:1234 #: appPlugins/ToolNCC.py:1007 appPlugins/ToolNCC.py:1076 msgid "Checking ..." msgstr "" #: appPlugins/ToolIsolation.py:1194 appPlugins/ToolIsolation.py:1655 #: appPlugins/ToolIsolation.py:1996 appPlugins/ToolIsolation.py:2578 #: appPlugins/ToolIsolation.py:2822 appPlugins/ToolNCC.py:1032 appPlugins/ToolNCC.py:1551 #: appPlugins/ToolPaint.py:1166 appPlugins/ToolPaint.py:1876 msgid "There are no tools selected in the Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:1202 msgid "Incomplete isolation. At least one tool could not do a complete isolation." msgstr "" #: appPlugins/ToolIsolation.py:1304 appPlugins/ToolNCC.py:1146 msgid "Optimal tool diameter found" msgstr "" #: appPlugins/ToolIsolation.py:1437 appPlugins/ToolMilling.py:2168 #: appPlugins/ToolNCC.py:1295 appPlugins/ToolPaint.py:949 msgid "New tool added to Tool Table from Tools Database." msgstr "" #: appPlugins/ToolIsolation.py:1485 appPlugins/ToolNCC.py:1355 appPlugins/ToolPaint.py:1008 msgid "Default tool added to Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:1516 appPlugins/ToolNCC.py:1412 appPlugins/ToolPaint.py:1033 #: appPlugins/ToolSolderPaste.py:630 msgid "Tool from Tool Table was edited." msgstr "" #: appPlugins/ToolIsolation.py:1528 appPlugins/ToolNCC.py:1425 appPlugins/ToolPaint.py:1046 msgid "Cancelled. New diameter value is already in the Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:1576 appPlugins/ToolNCC.py:1476 appPlugins/ToolPaint.py:1096 #: appPlugins/ToolSolderPaste.py:687 msgid "Delete failed. Select a tool to delete." msgstr "" #: appPlugins/ToolIsolation.py:1582 appPlugins/ToolNCC.py:1482 appPlugins/ToolPaint.py:1102 #: appPlugins/ToolSolderPaste.py:692 msgid "Tools deleted from Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:1634 msgid "Isolating" msgstr "" #: appPlugins/ToolIsolation.py:1688 msgid "Click on a polygon to isolate it." msgstr "" #: appPlugins/ToolIsolation.py:1866 appPlugins/ToolIsolation.py:1894 #: appPlugins/ToolIsolation.py:2056 appPlugins/ToolIsolation.py:2283 msgid "Subtracting Geo" msgstr "" #: appPlugins/ToolIsolation.py:1870 appPlugins/ToolIsolation.py:2060 #: appPlugins/ToolIsolation.py:2287 msgid "Intersecting Geo" msgstr "" #: appPlugins/ToolIsolation.py:1920 appPlugins/ToolIsolation.py:2137 #: appPlugins/ToolIsolation.py:2364 msgid "Empty Geometry in" msgstr "" #: appPlugins/ToolIsolation.py:2149 msgid "" "Partial failure. The geometry was processed with all tools.\n" "But there are still not-isolated geometry elements. Try to include a tool with smaller " "diameter." msgstr "" #: appPlugins/ToolIsolation.py:2152 msgid "The following are coordinates for the copper features that could not be isolated:" msgstr "" #: appPlugins/ToolIsolation.py:2544 appPlugins/ToolPaint.py:1277 msgid "Removed polygon" msgstr "" #: appPlugins/ToolIsolation.py:2545 appPlugins/ToolPaint.py:1278 msgid "Click to add/remove next polygon or right click to start." msgstr "" #: appPlugins/ToolIsolation.py:2550 appPlugins/ToolPaint.py:1283 msgid "No polygon detected under click position." msgstr "" #: appPlugins/ToolIsolation.py:2592 appPlugins/ToolPaint.py:1313 #: appPlugins/ToolPunchGerber.py:1787 msgid "List of single polygons is empty. Aborting." msgstr "" #: appPlugins/ToolIsolation.py:2727 msgid "Click the end point of the paint area." msgstr "" #: appPlugins/ToolIsolation.py:3041 appPlugins/ToolNCC.py:3978 appPlugins/ToolPaint.py:2859 #: appPlugins/ToolSolderPaste.py:589 msgid "New tool added to Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:3388 msgid "Gerber object for isolation routing." msgstr "" #: appPlugins/ToolIsolation.py:3412 appPlugins/ToolNCC.py:4109 msgid "" "Tools pool from which the algorithm\n" "will pick the ones used for copper clearing." msgstr "" #: appPlugins/ToolIsolation.py:3436 msgid "" "This is the Tool Number.\n" "Isolation routing will start with the tool with the biggest \n" "diameter, continuing until there are no more tools.\n" "Only tools that create Isolation geometry will still be present\n" "in the resulting geometry. This is because with some tools\n" "this function will not be able to create routing geometry." msgstr "" #: appPlugins/ToolIsolation.py:3478 appPlugins/ToolMilling.py:4190 appPlugins/ToolNCC.py:210 #: appPlugins/ToolNCC.py:4189 appPlugins/ToolPaint.py:206 appPlugins/ToolPaint.py:3065 msgid "Add from DB" msgstr "" #: appPlugins/ToolIsolation.py:3500 appPlugins/ToolNCC.py:4216 msgid "" "Find a tool diameter that is guaranteed\n" "to do a complete isolation." msgstr "" #: appPlugins/ToolIsolation.py:3539 appPlugins/ToolMilling.py:4240 #: appPlugins/ToolNCC.py:4255 appPlugins/ToolPaint.py:3117 #: appPlugins/ToolSolderPaste.py:1330 msgid "" "Delete a selection of tools in the Tool Table\n" "by first selecting a row in the Tool Table." msgstr "" #: appPlugins/ToolIsolation.py:3850 msgid "" "Specify the type of object to be excepted from isolation.\n" "It can be of type: Gerber or Geometry.\n" "What is selected here will dictate the kind\n" "of objects that will populate the 'Object' combobox." msgstr "" #: appPlugins/ToolIsolation.py:3860 msgid "Object whose area will be removed from isolation geometry." msgstr "" #: appPlugins/ToolIsolation.py:3931 appPlugins/ToolPunchGerber.py:2344 msgid "Select all available." msgstr "" #: appPlugins/ToolIsolation.py:3937 appPlugins/ToolPunchGerber.py:2350 msgid "Clear the selection." msgstr "" #: appPlugins/ToolIsolation.py:3970 msgid "" "Create a Geometry object with toolpaths to cut \n" "isolation outside, inside or on both sides of the\n" "object. For a Gerber object outside means outside\n" "of the Gerber feature and inside means inside of\n" "the Gerber feature, if possible at all. This means\n" "that only if the Gerber feature has openings inside, they\n" "will be isolated. If what is wanted is to cut isolation\n" "inside the actual Gerber feature, use a negative tool\n" "diameter above." msgstr "" #: appPlugins/ToolLevelling.py:555 appPlugins/ToolLevelling.py:885 msgid "" "Voronoi function can not be loaded.\n" "Shapely >= 1.8 is required" msgstr "" #: appPlugins/ToolLevelling.py:583 msgid "Click on canvas to add a Probe Point..." msgstr "" #: appPlugins/ToolLevelling.py:831 msgid "Point is not within the object area. Choose another point." msgstr "" #: appPlugins/ToolLevelling.py:851 msgid "Added a Probe Point... Click again to add another or right click to finish ..." msgstr "" #: appPlugins/ToolLevelling.py:873 msgid "Finished adding Probe Points..." msgstr "" #: appPlugins/ToolLevelling.py:1083 msgid "COM list updated ..." msgstr "" #: appPlugins/ToolLevelling.py:1119 msgid "Connected" msgstr "" #: appPlugins/ToolLevelling.py:1127 appPlugins/ToolLevelling.py:1149 #: appPlugins/ToolLevelling.py:2013 appPlugins/ToolLevelling.py:2020 msgid "Sender" msgstr "" #: appPlugins/ToolLevelling.py:1130 msgid "Port connected" msgstr "" #: appPlugins/ToolLevelling.py:1134 msgid "Could not connect to GRBL on port" msgstr "" #: appPlugins/ToolLevelling.py:1141 appPlugins/ToolLevelling.py:2094 msgid "Disconnected" msgstr "" #: appPlugins/ToolLevelling.py:1151 msgid "Port is connected. Disconnecting" msgstr "" #: appPlugins/ToolLevelling.py:1153 msgid "Could not connect to port" msgstr "" #: appPlugins/ToolLevelling.py:1183 appPlugins/ToolLevelling.py:1617 msgid "Sending" msgstr "" #: appPlugins/ToolLevelling.py:1312 msgid "GRBL is doing a home cycle." msgstr "" #: appPlugins/ToolLevelling.py:1318 msgid "GRBL software reset was sent." msgstr "" #: appPlugins/ToolLevelling.py:1326 msgid "GRBL resumed." msgstr "" #: appPlugins/ToolLevelling.py:1330 msgid "GRBL paused." msgstr "" #: appPlugins/ToolLevelling.py:1504 msgid "There is nothing to view" msgstr "" #: appPlugins/ToolLevelling.py:1510 msgid "Code Viewer" msgstr "" #: appPlugins/ToolLevelling.py:1548 msgid "Loaded Machine Code into Code Viewer" msgstr "" #: appPlugins/ToolLevelling.py:1562 appPlugins/ToolLevelling.py:1566 #: appPlugins/ToolLevelling.py:2302 msgid "Import Height Map" msgstr "" #: appPlugins/ToolLevelling.py:1593 msgid "Failed to open height map file" msgstr "" #: appPlugins/ToolLevelling.py:1643 msgid "Finished probing. Doing the autolevelling." msgstr "" #: appPlugins/ToolLevelling.py:1648 msgid "Sending probing GCode to the GRBL controller." msgstr "" #: appPlugins/ToolLevelling.py:1691 msgid "Empty GRBL heightmap." msgstr "" #: appPlugins/ToolLevelling.py:1695 msgid "Finished autolevelling." msgstr "" #: appPlugins/ToolLevelling.py:1757 msgid "CNCJob source object to be levelled." msgstr "" #: appPlugins/ToolLevelling.py:1790 msgid "Probe Points Table" msgstr "" #: appPlugins/ToolLevelling.py:1791 msgid "Generate GCode that will obtain the height map" msgstr "" #: appPlugins/ToolLevelling.py:1793 msgid "Show" msgstr "" #: appPlugins/ToolLevelling.py:1794 msgid "Toggle the display of the Probe Points table." msgstr "" #: appPlugins/ToolLevelling.py:1817 msgid "X-Y Coordinates" msgstr "" #: appPlugins/ToolLevelling.py:1817 msgid "Height" msgstr "" #: appPlugins/ToolLevelling.py:1821 msgid "Plot probing points" msgstr "" #: appPlugins/ToolLevelling.py:1823 msgid "" "Plot the probing points in the table.\n" "If a Voronoi method is used then\n" "the Voronoi areas are also plotted." msgstr "" #: appPlugins/ToolLevelling.py:1834 msgid "" "Will create a GCode which will be sent to the controller,\n" "either through a file or directly, with the intent to get the height map\n" "that is to modify the original GCode to level the cutting height." msgstr "" #: appPlugins/ToolLevelling.py:1943 msgid "Add Probe Points" msgstr "" #: appPlugins/ToolLevelling.py:2034 msgid "COM list" msgstr "" #: appPlugins/ToolLevelling.py:2036 appPlugins/ToolLevelling.py:2051 msgid "Lists the available serial ports." msgstr "" #: appPlugins/ToolLevelling.py:2040 msgid "Search" msgstr "" #: appPlugins/ToolLevelling.py:2042 msgid "Search for the available serial ports." msgstr "" #: appPlugins/ToolLevelling.py:2049 msgid "Baud rates" msgstr "" #: appPlugins/ToolLevelling.py:2068 msgid "New, custom baudrate." msgstr "" #: appPlugins/ToolLevelling.py:2076 msgid "Add the specified custom baudrate to the list." msgstr "" #: appPlugins/ToolLevelling.py:2082 msgid "Delete selected baudrate" msgstr "" #: appPlugins/ToolLevelling.py:2086 msgid "Reset" msgstr "" #: appPlugins/ToolLevelling.py:2088 msgid "Software reset of the controller." msgstr "" #: appPlugins/ToolLevelling.py:2096 msgid "Connect to the selected port with the selected baud rate." msgstr "" #: appPlugins/ToolLevelling.py:2120 msgid "Jog" msgstr "" #: appPlugins/ToolLevelling.py:2122 msgid "Zero Axes" msgstr "" #: appPlugins/ToolLevelling.py:2156 msgid "Pause/Resume" msgstr "" #: appPlugins/ToolLevelling.py:2215 msgid "Send Command" msgstr "" #: appPlugins/ToolLevelling.py:2217 appPlugins/ToolLevelling.py:2227 msgid "Send a custom command to GRBL." msgstr "" #: appPlugins/ToolLevelling.py:2222 msgid "Type GRBL command ..." msgstr "" #: appPlugins/ToolLevelling.py:2225 msgid "Send" msgstr "" #: appPlugins/ToolLevelling.py:2233 msgid "Get Config parameter" msgstr "" #: appPlugins/ToolLevelling.py:2235 msgid "A GRBL configuration parameter." msgstr "" #: appPlugins/ToolLevelling.py:2240 msgid "Type GRBL parameter ..." msgstr "" #: appPlugins/ToolLevelling.py:2243 msgid "Get" msgstr "" #: appPlugins/ToolLevelling.py:2245 msgid "Get the value of a specified GRBL parameter." msgstr "" #: appPlugins/ToolLevelling.py:2253 msgid "Get Report" msgstr "" #: appPlugins/ToolLevelling.py:2255 msgid "Print in shell the GRBL report." msgstr "" #: appPlugins/ToolLevelling.py:2261 msgid "Apply AutoLevelling" msgstr "" #: appPlugins/ToolLevelling.py:2263 msgid "" "Will send the probing GCode to the GRBL controller,\n" "wait for the Z probing data and then apply this data\n" "over the original GCode therefore doing autolevelling." msgstr "" #: appPlugins/ToolLevelling.py:2272 msgid "Will save the GRBL height map." msgstr "" #: appPlugins/ToolLevelling.py:2282 msgid "Save Probing GCode" msgstr "" #: appPlugins/ToolLevelling.py:2284 msgid "Will save the probing GCode." msgstr "" #: appPlugins/ToolLevelling.py:2295 msgid "View/Edit the probing GCode." msgstr "" #: appPlugins/ToolLevelling.py:2304 msgid "" "Import the file that has the Z heights\n" "obtained through probing and then apply this data\n" "over the original GCode therefore\n" "doing autolevelling." msgstr "" #: appPlugins/ToolMarkers.py:319 appPlugins/ToolMarkers.py:1181 msgid "Click to add next marker or right click to finish." msgstr "" #: appPlugins/ToolMarkers.py:514 appPlugins/ToolMarkers.py:825 appPlugins/ToolMarkers.py:871 #: appPlugins/ToolMarkers.py:934 appPlugins/ToolMarkers.py:980 msgid "Please select at least a location" msgstr "" #: appPlugins/ToolMarkers.py:802 appPlugins/ToolMarkers.py:911 msgid "The tool diameter is zero." msgstr "" #: appPlugins/ToolMarkers.py:903 appPlugins/ToolMarkers.py:1019 msgid "Excellon object with corner drills created." msgstr "" #: appPlugins/ToolMarkers.py:1055 appPlugins/ToolSolderPaste.py:966 msgid "There is no Geometry object available." msgstr "" #: appPlugins/ToolMarkers.py:1123 msgid "A Gerber object with corner markers was created." msgstr "" #: appPlugins/ToolMarkers.py:1180 msgid "Added marker" msgstr "" #: appPlugins/ToolMarkers.py:1264 msgid "The Gerber object to which will be added corner markers." msgstr "" #: appPlugins/ToolMarkers.py:1350 msgid "" "Reference for offseting the marker locations.\n" "- Edge - referenced from the bounding box edge\n" "- Center - referenced from the bounding box center" msgstr "" #: appPlugins/ToolMarkers.py:1400 msgid "Locations" msgstr "" #: appPlugins/ToolMarkers.py:1401 msgid "Locations where to place corner markers." msgstr "" #: appPlugins/ToolMarkers.py:1433 msgid "Toggle ALL" msgstr "" #: appPlugins/ToolMarkers.py:1452 msgid "" "When the manual type is chosen, the markers\n" "are manually placed on canvas." msgstr "" #: appPlugins/ToolMarkers.py:1457 msgid "Numeric" msgstr "" #: appPlugins/ToolMarkers.py:1470 msgid "Tuple of marker coordinates." msgstr "" #: appPlugins/ToolMarkers.py:1481 msgid "Add Marker" msgstr "" #: appPlugins/ToolMarkers.py:1484 appPlugins/ToolMarkers.py:1580 msgid "Will add corner markers to the selected object." msgstr "" #: appPlugins/ToolMarkers.py:1492 msgid "Drills in Locations" msgstr "" #: appPlugins/ToolMarkers.py:1519 msgid "Will add drill holes in the center of the markers." msgstr "" #: appPlugins/ToolMarkers.py:1526 msgid "Check in Locations" msgstr "" #: appPlugins/ToolMarkers.py:1533 msgid "" "Will create an Excellon object using a special preprocessor.\n" "The spindle will not start and the mounted probe will move to\n" "the corner locations, wait for the user interaction and then\n" "move to the next location until the last one." msgstr "" #: appPlugins/ToolMarkers.py:1543 msgid "Insert Markers" msgstr "" #: appPlugins/ToolMarkers.py:1545 msgid "" "Enabled only if markers are available (added to an object).\n" "Those markers will be inserted in yet another object." msgstr "" #: appPlugins/ToolMarkers.py:1558 msgid "Specify the type of object where the markers are inserted." msgstr "" #: appPlugins/ToolMarkers.py:1577 msgid "Insert Marker" msgstr "" #: appPlugins/ToolMilling.py:885 msgid "Could not build the Plugin UI" msgstr "" #: appPlugins/ToolMilling.py:1345 msgid "Milling Tool" msgstr "" #: appPlugins/ToolMilling.py:1415 msgid "Pressure" msgstr "" #: appPlugins/ToolMilling.py:1417 msgid "" "Negative value. The higher the absolute value\n" "the stronger the pressure of the brush on the material." msgstr "" #: appPlugins/ToolMilling.py:1944 msgid "" "For V-shape tools the depth of cut is\n" "calculated from other parameters like:\n" "- 'V-tip Angle' -> angle at the tip of the tool\n" "- 'V-tip Dia' -> diameter at the tip of the tool \n" "- Tool Dia -> 'Dia' column found in the Tool Table\n" "NB: a value of zero means that Tool Dia = 'V-tip Dia'" msgstr "" #: appPlugins/ToolMilling.py:2226 msgid "Tool added in Tool Table." msgstr "" #: appPlugins/ToolMilling.py:2341 msgid "Tool was edited in Tool Table." msgstr "" #: appPlugins/ToolMilling.py:2370 appPlugins/ToolMilling.py:2379 msgid "Failed. Select a tool to copy." msgstr "" #: appPlugins/ToolMilling.py:2403 msgid "Tool was copied in Tool Table." msgstr "" #: appPlugins/ToolMilling.py:2431 appPlugins/ToolMilling.py:2440 msgid "Failed. Select a tool to delete." msgstr "" #: appPlugins/ToolMilling.py:2461 msgid "Tool was deleted in Tool Table." msgstr "" #: appPlugins/ToolMilling.py:2749 appPlugins/ToolMilling.py:2914 msgid "This Geometry can't be processed because it is" msgstr "" #: appPlugins/ToolMilling.py:2782 appPlugins/ToolMilling.py:2948 msgid "Failed. No tool selected in the tool table ..." msgstr "" #: appPlugins/ToolMilling.py:3295 appPlugins/ToolPaint.py:1820 msgid "Geometry could not be painted completely" msgstr "" #: appPlugins/ToolMilling.py:3952 appPlugins/ToolNCC.py:4059 appPlugins/ToolPaint.py:2942 msgid "Source object for milling operation." msgstr "" #: appPlugins/ToolMilling.py:3965 msgid "Object for milling operation." msgstr "" #: appPlugins/ToolMilling.py:4004 msgid "Tools in the object used for milling." msgstr "" #: appPlugins/ToolMilling.py:4152 msgid "" "This is the Tool Number.\n" "When ToolChange is checked, on toolchange event this value\n" "will be showed as a T1, T2 ... Tn" msgstr "" #: appPlugins/ToolMilling.py:4162 msgid "" "Plot column. It is visible only for MultiGeo geometries, meaning geometries that holds " "the geometry\n" "data into the tools. For those geometries, deleting the tool will delete the geometry " "data also,\n" "so be WARNED. From the checkboxes on each row it can be enabled/disabled the plot on " "canvas\n" "for the corresponding tool." msgstr "" #: appPlugins/ToolMilling.py:4322 msgid "Offset Type" msgstr "" #: appPlugins/ToolMilling.py:4325 msgid "" "The value for the Offset can be:\n" "- Path -> There is no offset, the tool cut will be done through the geometry line.\n" "- In(side) -> The tool cut will follow the geometry inside. It will create a 'pocket'.\n" "- Out(side) -> The tool cut will follow the geometry line on the outside.\n" "- Custom -> The tool will cut at an chosen offset." msgstr "" #: appPlugins/ToolMilling.py:4345 msgid "" "The value to offset the cut when \n" "the Offset type selected is 'Custom'.\n" "The value can be positive for 'outside'\n" "cut and negative for 'inside' cut." msgstr "" #: appPlugins/ToolMilling.py:4888 msgid "" "The preprocessor JSON file that dictates\n" "Gcode output for Geometry (Milling) Objects." msgstr "" #: appPlugins/ToolMilling.py:4899 msgid "Allow levelling" msgstr "" #: appPlugins/ToolMilling.py:4901 msgid "Allow levelling by having segments size more than zero." msgstr "" #: appPlugins/ToolMove.py:95 msgid "MOVE: Click on the Start point ..." msgstr "" #: appPlugins/ToolMove.py:106 msgid "Cancelled. No object(s) to move." msgstr "" #: appPlugins/ToolMove.py:155 msgid "Error when mouse left click." msgstr "" #: appPlugins/ToolNCC.py:1044 msgid "Incomplete isolation. None of the selected tools could do a complete isolation." msgstr "" #: appPlugins/ToolNCC.py:1047 msgid "At least one of the selected tools can do a complete isolation." msgstr "" #: appPlugins/ToolNCC.py:1192 appPlugins/ToolNCC.py:1271 appPlugins/ToolNCC.py:1329 #: appPlugins/ToolNCC.py:3965 appPlugins/ToolPaint.py:837 appPlugins/ToolPaint.py:923 #: appPlugins/ToolPaint.py:983 appPlugins/ToolPaint.py:2846 #: appPlugins/ToolSolderPaste.py:584 msgid "Tool already in Tool Table." msgstr "" #: appPlugins/ToolNCC.py:1920 appPlugins/ToolNCC.py:2906 msgid "NCC Tool. Preparing non-copper polygons." msgstr "" #: appPlugins/ToolNCC.py:1980 appPlugins/ToolNCC.py:3025 msgid "NCC Tool. Calculate 'empty' area." msgstr "" #: appPlugins/ToolNCC.py:1991 appPlugins/ToolNCC.py:2020 appPlugins/ToolNCC.py:2126 #: appPlugins/ToolNCC.py:2139 appPlugins/ToolNCC.py:3040 appPlugins/ToolNCC.py:3145 #: appPlugins/ToolNCC.py:3160 appPlugins/ToolNCC.py:3428 appPlugins/ToolNCC.py:3529 #: appPlugins/ToolNCC.py:3544 msgid "Buffering finished" msgstr "" #: appPlugins/ToolNCC.py:1995 appPlugins/ToolNCC.py:2024 appPlugins/ToolNCC.py:2130 #: appPlugins/ToolNCC.py:2142 appPlugins/ToolNCC.py:3048 appPlugins/ToolNCC.py:3167 #: appPlugins/ToolNCC.py:3435 appPlugins/ToolNCC.py:3551 msgid "Could not get the extent of the area to be non copper cleared." msgstr "" #: appPlugins/ToolNCC.py:2003 appPlugins/ToolNCC.py:2153 appPlugins/ToolNCC.py:3178 msgid "NCC Tool. Finished calculation of 'empty' area." msgstr "" #: appPlugins/ToolNCC.py:2056 appPlugins/ToolNCC.py:3075 appPlugins/ToolNCC.py:3152 #: appPlugins/ToolNCC.py:3455 appPlugins/ToolNCC.py:3536 msgid "Isolation geometry is broken. Margin is less than isolation tool diameter." msgstr "" #: appPlugins/ToolNCC.py:2146 appPlugins/ToolNCC.py:3171 appPlugins/ToolNCC.py:3554 msgid "The selected object is not suitable for copper clearing." msgstr "" #: appPlugins/ToolNCC.py:2196 msgid "Clearing the polygon with the method: lines." msgstr "" #: appPlugins/ToolNCC.py:2206 msgid "Failed. Clearing the polygon with the method: seed." msgstr "" #: appPlugins/ToolNCC.py:2215 msgid "Failed. Clearing the polygon with the method: standard." msgstr "" #: appPlugins/ToolNCC.py:2231 msgid "Polygon could not be cleared. Location:" msgstr "" #: appPlugins/ToolNCC.py:2284 msgid "There is no copper clearing tool in the selection and at least one is needed." msgstr "" #: appPlugins/ToolNCC.py:2299 appPlugins/ToolNCC.py:2993 msgid "NCC Tool. Finished non-copper polygons. Normal copper clearing task started." msgstr "" #: appPlugins/ToolNCC.py:2327 appPlugins/ToolNCC.py:2565 msgid "NCC Tool failed creating bounding box." msgstr "" #: appPlugins/ToolNCC.py:2347 appPlugins/ToolNCC.py:2608 appPlugins/ToolNCC.py:3192 #: appPlugins/ToolNCC.py:3579 msgid "NCC Tool clearing with tool diameter" msgstr "" #: appPlugins/ToolNCC.py:2347 appPlugins/ToolNCC.py:2608 appPlugins/ToolNCC.py:3192 #: appPlugins/ToolNCC.py:3579 msgid "started." msgstr "" #: appPlugins/ToolNCC.py:2482 msgid "Could not use the tool for copper clear." msgstr "" #: appPlugins/ToolNCC.py:2505 appPlugins/ToolNCC.py:3354 msgid "" "There is no NCC Geometry in the file.\n" "Usually it means that the tool diameter is too big for the painted geometry.\n" "Change the painting parameters and try again." msgstr "" #: appPlugins/ToolNCC.py:2515 appPlugins/ToolNCC.py:3363 msgid "NCC Tool clear all done." msgstr "" #: appPlugins/ToolNCC.py:2518 appPlugins/ToolNCC.py:3366 msgid "NCC Tool clear all done but the copper features isolation is broken for" msgstr "" #: appPlugins/ToolNCC.py:2520 appPlugins/ToolNCC.py:2770 appPlugins/ToolNCC.py:3368 #: appPlugins/ToolNCC.py:3751 msgid "tools" msgstr "" #: appPlugins/ToolNCC.py:2547 msgid "NCC Tool. Rest machining copper clearing task started." msgstr "" #: appPlugins/ToolNCC.py:2766 appPlugins/ToolNCC.py:3747 msgid "NCC Tool Rest Machining clear all done." msgstr "" #: appPlugins/ToolNCC.py:2769 appPlugins/ToolNCC.py:3750 msgid "" "NCC Tool Rest Machining clear all done but the copper features isolation is broken for" msgstr "" #: appPlugins/ToolNCC.py:2867 msgid "NCC Tool started. Reading parameters." msgstr "" #: appPlugins/ToolNCC.py:3856 msgid "" "Try to use the Buffering Type = Full in Preferences -> Gerber General. Reload the Gerber " "file after this change." msgstr "" #: appPlugins/ToolNCC.py:4075 msgid "" "Specify the type of object to be cleared of excess copper.\n" "It can be of type: Gerber or Geometry.\n" "What is selected here will dictate the kind\n" "of objects that will populate the 'Object' combobox." msgstr "" #: appPlugins/ToolNCC.py:4133 msgid "" "This is the Tool Number.\n" "Non copper clearing will start with the tool with the biggest \n" "diameter, continuing until there are no more tools.\n" "Only tools that create NCC clearing geometry will still be present\n" "in the resulting geometry. This is because with some tools\n" "this function will not be able to create painting geometry." msgstr "" #: appPlugins/ToolNCC.py:4542 msgid "" "The type of FlatCAM object to be used as non copper clearing reference.\n" "It can be Gerber, Excellon or Geometry." msgstr "" #: appPlugins/ToolObjectDistance.py:86 appPlugins/ToolObjectDistance.py:432 msgid "Object Distance" msgstr "" #: appPlugins/ToolObjectDistance.py:188 msgid "Objects intersects or touch at" msgstr "" #: appPlugins/ToolObjectDistance.py:199 appPlugins/ToolObjectDistance.py:223 #: appPlugins/ToolObjectDistance.py:233 appPlugins/ToolObjectDistance.py:244 #: appPlugins/ToolObjectDistance.py:267 appPlugins/ToolObjectDistance.py:296 #: appPlugins/ToolObjectDistance.py:314 appPlugins/ToolObjectDistance.py:333 msgid "Select two objects and no more. Currently the selection has objects: " msgstr "" #: appPlugins/ToolObjectDistance.py:360 msgid "Jumped to the half point between the two selected objects" msgstr "" #: appPlugins/ToolObjectDistance.py:463 msgid "" "The type of distance to be calculated.\n" "- Nearest points - minimal distance between objects\n" "- Center points - distance between the center of the bounding boxes" msgstr "" #: appPlugins/ToolObjectDistance.py:469 msgid "Nearest points" msgstr "" #: appPlugins/ToolObjectDistance.py:469 msgid "Center points" msgstr "" #: appPlugins/ToolObjectDistance.py:587 msgid "Half Point" msgstr "" #: appPlugins/ToolObjectDistance.py:588 appPlugins/ToolObjectDistance.py:593 msgid "This is the middle point of the point to point Euclidean distance." msgstr "" #: appPlugins/ToolObjectDistance.py:603 msgid "Jump to Half Point" msgstr "" #: appPlugins/ToolOptimal.py:102 appPlugins/ToolOptimal.py:461 msgid "Find Optimal" msgstr "" #: appPlugins/ToolOptimal.py:213 msgid "Only Gerber objects can be evaluated." msgstr "" #: appPlugins/ToolOptimal.py:219 msgid "Optimal Tool. Started to search for the minimum distance between copper features." msgstr "" #: appPlugins/ToolOptimal.py:229 msgid "Optimal Tool. Parsing geometry for aperture" msgstr "" #: appPlugins/ToolOptimal.py:240 msgid "Optimal Tool. Creating a buffer for the object geometry." msgstr "" #: appPlugins/ToolOptimal.py:254 msgid "Optimal Tool. Finding the distances between each two elements. Iterations" msgstr "" #: appPlugins/ToolOptimal.py:288 msgid "Optimal Tool. Finding the minimum distance." msgstr "" #: appPlugins/ToolOptimal.py:305 msgid "Optimal Tool. Finished successfully." msgstr "" #: appPlugins/ToolOptimal.py:490 msgid "GERBER" msgstr "" #: appPlugins/ToolOptimal.py:516 msgid "Number of decimals kept for found distances." msgstr "" #: appPlugins/ToolOptimal.py:527 msgid "Minimum distance" msgstr "" #: appPlugins/ToolOptimal.py:528 msgid "Display minimum distance between copper features." msgstr "" #: appPlugins/ToolOptimal.py:538 msgid "Determined" msgstr "" #: appPlugins/ToolOptimal.py:550 msgid "Occurring" msgstr "" #: appPlugins/ToolOptimal.py:551 msgid "How many times this minimum is found." msgstr "" #: appPlugins/ToolOptimal.py:559 msgid "Minimum points coordinates" msgstr "" #: appPlugins/ToolOptimal.py:560 appPlugins/ToolOptimal.py:566 msgid "Coordinates for points where minimum distance was found." msgstr "" #: appPlugins/ToolOptimal.py:579 appPlugins/ToolOptimal.py:664 msgid "Jump to selected position" msgstr "" #: appPlugins/ToolOptimal.py:581 appPlugins/ToolOptimal.py:666 msgid "" "Select a position in the Locations text box and then\n" "click this button." msgstr "" #: appPlugins/ToolOptimal.py:591 msgid "Other distances" msgstr "" #: appPlugins/ToolOptimal.py:592 msgid "" "Will display other distances in the Gerber file ordered from\n" "the minimum to the maximum, not including the absolute minimum." msgstr "" #: appPlugins/ToolOptimal.py:603 msgid "Other distances points coordinates" msgstr "" #: appPlugins/ToolOptimal.py:604 appPlugins/ToolOptimal.py:619 appPlugins/ToolOptimal.py:626 #: appPlugins/ToolOptimal.py:643 appPlugins/ToolOptimal.py:650 msgid "" "Other distances and the coordinates for points\n" "where the distance was found." msgstr "" #: appPlugins/ToolOptimal.py:618 msgid "Gerber distances" msgstr "" #: appPlugins/ToolOptimal.py:642 msgid "Points coordinates" msgstr "" #: appPlugins/ToolOptimal.py:674 msgid "Find Minimum" msgstr "" #: appPlugins/ToolOptimal.py:677 msgid "" "Calculate the minimum distance between copper features,\n" "this will allow the determination of the right tool to\n" "use for isolation or copper clearing." msgstr "" #: appPlugins/ToolPDF.py:26 msgid "PDF Import Tool" msgstr "" #: appPlugins/ToolPDF.py:78 appPlugins/ToolPDF.py:82 msgid "Open PDF" msgstr "" #: appPlugins/ToolPDF.py:85 msgid "Open PDF cancelled" msgstr "" #: appPlugins/ToolPDF.py:113 msgid "Parsing" msgstr "" #: appPlugins/ToolPDF.py:273 appPlugins/ToolPDF.py:346 #, python-format msgid "Rendering PDF layer #%d ..." msgstr "" #: appPlugins/ToolPDF.py:277 appPlugins/ToolPDF.py:350 msgid "Open PDF file failed." msgstr "" #: appPlugins/ToolPDF.py:282 appPlugins/ToolPDF.py:355 msgid "Rendered" msgstr "" #: appPlugins/ToolPaint.py:1144 msgid "Can't do Paint on MultiGeo geometries" msgstr "" #: appPlugins/ToolPaint.py:1181 msgid "Click on a polygon to paint it." msgstr "" #: appPlugins/ToolPaint.py:1781 msgid "Painting polygon with method: lines." msgstr "" #: appPlugins/ToolPaint.py:1793 msgid "Failed. Painting polygon with method: seed." msgstr "" #: appPlugins/ToolPaint.py:1804 msgid "Failed. Painting polygon with method: standard." msgstr "" #: appPlugins/ToolPaint.py:1896 appPlugins/ToolPaint.py:2084 msgid "Painting with tool diameter = " msgstr "" #: appPlugins/ToolPaint.py:1899 appPlugins/ToolPaint.py:2087 msgid "started" msgstr "" #: appPlugins/ToolPaint.py:1926 appPlugins/ToolPaint.py:2074 msgid "There is no geometry to process or the tool diameter is too big." msgstr "" #: appPlugins/ToolPaint.py:2040 appPlugins/ToolPaint.py:2266 msgid "" "There is no Painting Geometry in the file.\n" "Usually it means that the tool diameter is too big for the painted geometry.\n" "Change the painting parameters and try again." msgstr "" #: appPlugins/ToolPaint.py:2320 msgid "Painting ..." msgstr "" #: appPlugins/ToolPaint.py:2354 appPlugins/ToolPaint.py:2359 appPlugins/ToolPaint.py:2367 #: appPlugins/ToolPaint.py:2455 appPlugins/ToolPaint.py:2459 appPlugins/ToolPaint.py:2467 #: appPlugins/ToolPaint.py:2538 appPlugins/ToolPaint.py:2543 appPlugins/ToolPaint.py:2549 msgid "Paint Plugin." msgstr "" #: appPlugins/ToolPaint.py:2355 appPlugins/ToolPaint.py:2359 appPlugins/ToolPaint.py:2367 msgid "Normal painting polygon task started." msgstr "" #: appPlugins/ToolPaint.py:2356 appPlugins/ToolPaint.py:2456 appPlugins/ToolPaint.py:2540 msgid "Buffering geometry..." msgstr "" #: appPlugins/ToolPaint.py:2381 appPlugins/ToolPaint.py:2474 appPlugins/ToolPaint.py:2587 msgid "No polygon found." msgstr "" #: appPlugins/ToolPaint.py:2455 appPlugins/ToolPaint.py:2459 appPlugins/ToolPaint.py:2467 msgid "Paint all polygons task started." msgstr "" #: appPlugins/ToolPaint.py:2539 appPlugins/ToolPaint.py:2543 appPlugins/ToolPaint.py:2549 msgid "Painting area task started." msgstr "" #: appPlugins/ToolPaint.py:2919 msgid "" "Create a Geometry object with toolpaths\n" "that cover only the copper pattern." msgstr "" #: appPlugins/ToolPaint.py:2958 msgid "" "Specify the type of object to be painted.\n" "It can be of type: Gerber or Geometry.\n" "What is selected here will dictate the kind\n" "of objects that will populate the 'Object' combobox." msgstr "" #: appPlugins/ToolPaint.py:2992 msgid "" "Tools pool from which the algorithm\n" "will pick the ones used for painting." msgstr "" #: appPlugins/ToolPaint.py:3015 msgid "" "This is the Tool Number.\n" "Painting will start with the tool with the biggest diameter,\n" "continuing until there are no more tools.\n" "Only tools that create painting geometry will still be present\n" "in the resulting geometry. This is because with some tools\n" "this function will not be able to create painting geometry." msgstr "" #: appPlugins/ToolPaint.py:3298 msgid "" "The type of FlatCAM object to be used as paint reference.\n" "It can be Gerber, Excellon or Geometry." msgstr "" #: appPlugins/ToolPaint.py:3342 msgid "Create a Geometry Object which paints the polygons." msgstr "" #: appPlugins/ToolPanelize.py:96 appPlugins/ToolPanelize.py:1120 msgid "Panelization" msgstr "" #: appPlugins/ToolPanelize.py:349 msgid "Columns or Rows are zero value. Change them to a positive integer." msgstr "" #: appPlugins/ToolPanelize.py:392 msgid "Generating panel ... " msgstr "" #: appPlugins/ToolPanelize.py:487 appPlugins/ToolPanelize.py:800 #: appPlugins/ToolPanelize.py:1072 tclCommands/TclCommandPanelize.py:292 msgid "Generating panel ... Adding the source code." msgstr "" #: appPlugins/ToolPanelize.py:728 msgid "Optimizing the overlapping paths." msgstr "" #: appPlugins/ToolPanelize.py:760 msgid "Optimization complete." msgstr "" #: appPlugins/ToolPanelize.py:1081 msgid "Generating panel... Spawning copies" msgstr "" #: appPlugins/ToolPanelize.py:1097 #, python-brace-format msgid "{text} Too big for the constrain area. Final panel has {col} columns and {row} rows" msgstr "" #: appPlugins/ToolPanelize.py:1105 msgid "Panel created successfully." msgstr "" #: appPlugins/ToolPanelize.py:1158 msgid "" "Specify the type of object to be panelized\n" "It can be of type: Gerber, Excellon or Geometry.\n" "The selection here decide the type of objects that will be\n" "in the Object combobox." msgstr "" #: appPlugins/ToolPanelize.py:1191 msgid "" "Object to be panelized. This means that it will\n" "be duplicated in an array of rows and columns." msgstr "" #: appPlugins/ToolPanelize.py:1203 msgid "" "Choose the reference for panelization:\n" "- Object = the bounding box of a different object\n" "- Bounding Box = the bounding box of the object to be panelized\n" "\n" "The reference is useful when doing panelization for more than one\n" "object. The spacings (really offsets) will be applied in reference\n" "to this reference object therefore maintaining the panelized\n" "objects in sync." msgstr "" #: appPlugins/ToolPanelize.py:1236 msgid "" "Specify the type of object to be used as an container for\n" "panelization. It can be: Gerber or Geometry type.\n" "The selection here decide the type of objects that will be\n" "in the Box Object combobox." msgstr "" #: appPlugins/ToolPanelize.py:1251 msgid "" "The actual object that is used as container for the\n" " selected object that is to be panelized." msgstr "" #: appPlugins/ToolPanelize.py:1259 msgid "Panel Data" msgstr "" #: appPlugins/ToolPanelize.py:1261 msgid "" "This informations will shape the resulting panel.\n" "The number of rows and columns will set how many\n" "duplicates of the original geometry will be generated.\n" "\n" "The spacings will set the distance between any two\n" "elements of the panel array." msgstr "" #: appPlugins/ToolPanelize.py:1360 msgid "Constrain panel within" msgstr "" #: appPlugins/ToolPanelize.py:1407 msgid "Panelize Object" msgstr "" #: appPlugins/ToolPanelize.py:1410 appPlugins/ToolRulesCheck.py:1754 msgid "" "Panelize the specified object around the specified box.\n" "In other words it creates multiple copies of the source object,\n" "arranged in a 2D array of rows and columns." msgstr "" #: appPlugins/ToolPcbWizard.py:102 appPlugins/ToolPcbWizard.py:386 msgid "PcbWizard Import" msgstr "" #: appPlugins/ToolPcbWizard.py:203 appPlugins/ToolPcbWizard.py:207 msgid "Load PcbWizard Excellon file" msgstr "" #: appPlugins/ToolPcbWizard.py:226 appPlugins/ToolPcbWizard.py:230 msgid "Load PcbWizard INF file" msgstr "" #: appPlugins/ToolPcbWizard.py:278 msgid "" "The INF file does not contain the tool table.\n" "Try to open the Excellon file from File -> Open -> Excellon\n" "and edit the drill diameters manually." msgstr "" #: appPlugins/ToolPcbWizard.py:298 msgid "PcbWizard .INF file loaded." msgstr "" #: appPlugins/ToolPcbWizard.py:302 msgid "Main PcbWizard Excellon file loaded." msgstr "" #: appPlugins/ToolPcbWizard.py:338 msgid "Cannot parse file" msgstr "" #: appPlugins/ToolPcbWizard.py:369 msgid "Import Excellon file failed." msgstr "" #: appPlugins/ToolPcbWizard.py:376 msgid "Imported" msgstr "" #: appPlugins/ToolPcbWizard.py:379 msgid "Excellon merging is in progress. Please wait..." msgstr "" #: appPlugins/ToolPcbWizard.py:381 msgid "The imported Excellon file is empty." msgstr "" #: appPlugins/ToolPcbWizard.py:398 msgid "Load files" msgstr "" #: appPlugins/ToolPcbWizard.py:404 msgid "Excellon file" msgstr "" #: appPlugins/ToolPcbWizard.py:406 msgid "" "Load the Excellon file.\n" "Usually it has a .DRL extension" msgstr "" #: appPlugins/ToolPcbWizard.py:413 msgid "INF file" msgstr "" #: appPlugins/ToolPcbWizard.py:415 msgid "Load the INF file." msgstr "" #: appPlugins/ToolPcbWizard.py:428 msgid "Tool Number" msgstr "" #: appPlugins/ToolPcbWizard.py:430 msgid "Tool diameter in file units." msgstr "" #: appPlugins/ToolPcbWizard.py:445 msgid "Int. digits" msgstr "" #: appPlugins/ToolPcbWizard.py:447 msgid "The number of digits for the integral part of the coordinates." msgstr "" #: appPlugins/ToolPcbWizard.py:455 msgid "Frac. digits" msgstr "" #: appPlugins/ToolPcbWizard.py:457 msgid "The number of digits for the fractional part of the coordinates." msgstr "" #: appPlugins/ToolPcbWizard.py:465 msgid "No Suppression" msgstr "" #: appPlugins/ToolPcbWizard.py:466 msgid "Zeros supp." msgstr "" #: appPlugins/ToolPcbWizard.py:468 msgid "" "The type of zeros suppression used.\n" "Can be of type:\n" "- LZ = leading zeros are kept\n" "- TZ = trailing zeros are kept\n" "- No Suppression = no zero suppression" msgstr "" #: appPlugins/ToolPcbWizard.py:482 msgid "" "The type of units that the coordinates and tool\n" "diameters are using. Can be INCH or MM." msgstr "" #: appPlugins/ToolPcbWizard.py:490 msgid "Import Excellon" msgstr "" #: appPlugins/ToolPcbWizard.py:492 msgid "" "Import an Excellon file\n" "that store it's information's in 2 files.\n" "One usually has .DRL extension while\n" "the other has .INF extension." msgstr "" #: appPlugins/ToolPunchGerber.py:574 msgid "Click on a pad to select it." msgstr "" #: appPlugins/ToolPunchGerber.py:823 appPlugins/ToolPunchGerber.py:956 msgid "The value of the fixed diameter is 0.0. Aborting." msgstr "" #: appPlugins/ToolPunchGerber.py:1732 msgid "Added pad" msgstr "" #: appPlugins/ToolPunchGerber.py:1733 msgid "Click to add next pad or right click to start." msgstr "" #: appPlugins/ToolPunchGerber.py:1745 msgid "Removed pad" msgstr "" #: appPlugins/ToolPunchGerber.py:1746 msgid "Click to add/remove next pad or right click to start." msgstr "" #: appPlugins/ToolPunchGerber.py:1751 msgid "No pad detected under click position." msgstr "" #: appPlugins/ToolPunchGerber.py:1939 msgid "All selectable pads are selected." msgstr "" #: appPlugins/ToolPunchGerber.py:1956 msgid "Selection cleared." msgstr "" #: appPlugins/ToolPunchGerber.py:2024 msgid "Gerber into which to punch holes" msgstr "" #: appPlugins/ToolPunchGerber.py:2171 msgid "Remove the geometry of Excellon from the Gerber to create the holes in pads." msgstr "" #: appPlugins/ToolPunchGerber.py:2326 msgid "" "When the manual type is chosen, the pads to be punched\n" "are selected on the canvas but only those that\n" "are in the processed pads." msgstr "" #: appPlugins/ToolPunchGerber.py:2360 msgid "" "Create a Gerber object from the selected object, within\n" "the specified box." msgstr "" #: appPlugins/ToolQRCode.py:215 appPlugins/ToolQRCode.py:561 appPlugins/ToolQRCode.py:612 msgid "Cancelled. There is no QRCode Data in the text box." msgstr "" #: appPlugins/ToolQRCode.py:392 msgid "QRCode Tool done." msgstr "" #: appPlugins/ToolQRCode.py:756 msgid "Gerber Object to which the QRCode will be added." msgstr "" #: appPlugins/ToolQRCode.py:796 msgid "The parameters used to shape the QRCode." msgstr "" #: appPlugins/ToolQRCode.py:906 msgid "Export QRCode" msgstr "" #: appPlugins/ToolQRCode.py:908 msgid "" "Show a set of controls allowing to export the QRCode\n" "to a SVG file or an PNG file." msgstr "" #: appPlugins/ToolQRCode.py:944 msgid "Transparent back color" msgstr "" #: appPlugins/ToolQRCode.py:969 msgid "Export QRCode SVG" msgstr "" #: appPlugins/ToolQRCode.py:971 msgid "Export a SVG file with the QRCode content." msgstr "" #: appPlugins/ToolQRCode.py:977 msgid "Export QRCode PNG" msgstr "" #: appPlugins/ToolQRCode.py:979 msgid "Export a PNG image file with the QRCode content." msgstr "" #: appPlugins/ToolQRCode.py:985 msgid "Insert QRCode" msgstr "" #: appPlugins/ToolQRCode.py:988 msgid "Create the QRCode object." msgstr "" #: appPlugins/ToolReport.py:18 appPlugins/ToolReport.py:148 msgid "Object Report" msgstr "" #: appPlugins/ToolReport.py:143 msgid "Object Properties are displayed." msgstr "" #: appPlugins/ToolReport.py:165 msgid "TYPE" msgstr "" #: appPlugins/ToolReport.py:166 msgid "NAME" msgstr "" #: appPlugins/ToolReport.py:196 msgid "Geo Type" msgstr "" #: appPlugins/ToolReport.py:199 msgid "Single-Geo" msgstr "" #: appPlugins/ToolReport.py:200 msgid "Multi-Geo" msgstr "" #: appPlugins/ToolReport.py:355 appPlugins/ToolReport.py:360 appPlugins/ToolReport.py:362 msgid "Metric" msgstr "" #: appPlugins/ToolRulesCheck.py:105 appPlugins/ToolRulesCheck.py:1162 msgid "Check Rules" msgstr "" #: appPlugins/ToolRulesCheck.py:677 appPlugins/ToolRulesCheck.py:737 #: appPlugins/ToolRulesCheck.py:774 appPlugins/ToolRulesCheck.py:846 #: appPlugins/ToolRulesCheck.py:900 appPlugins/ToolRulesCheck.py:938 #: appPlugins/ToolRulesCheck.py:1003 msgid "Value is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:691 msgid "TOP -> Copper to Copper clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:702 msgid "BOTTOM -> Copper to Copper clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:707 appPlugins/ToolRulesCheck.py:801 #: appPlugins/ToolRulesCheck.py:965 msgid "At least one Gerber object has to be selected for this rule but none is selected." msgstr "" #: appPlugins/ToolRulesCheck.py:743 msgid "One of the copper Gerber objects or the Outline Gerber object is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:756 appPlugins/ToolRulesCheck.py:920 msgid "Outline Gerber object presence is mandatory for this rule but it is not selected." msgstr "" #: appPlugins/ToolRulesCheck.py:773 appPlugins/ToolRulesCheck.py:800 msgid "Silk to Silk clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:786 msgid "TOP -> Silk to Silk clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:796 msgid "BOTTOM -> Silk to Silk clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:852 msgid "One or more of the Gerber objects is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:860 msgid "TOP -> Silk to Solder Mask Clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:866 msgid "BOTTOM -> Silk to Solder Mask Clearance" msgstr "" #: appPlugins/ToolRulesCheck.py:870 msgid "Both Silk and Solder Mask Gerber objects has to be either both Top or both Bottom." msgstr "" #: appPlugins/ToolRulesCheck.py:906 msgid "One of the Silk Gerber objects or the Outline Gerber object is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:950 msgid "TOP -> Minimum Solder Mask Sliver" msgstr "" #: appPlugins/ToolRulesCheck.py:960 msgid "BOTTOM -> Minimum Solder Mask Sliver" msgstr "" #: appPlugins/ToolRulesCheck.py:1009 msgid "One of the Copper Gerber objects or the Excellon objects is not valid." msgstr "" #: appPlugins/ToolRulesCheck.py:1025 msgid "Excellon object presence is mandatory for this rule but none is selected." msgstr "" #: appPlugins/ToolRulesCheck.py:1103 appPlugins/ToolRulesCheck.py:1116 #: appPlugins/ToolRulesCheck.py:1127 appPlugins/ToolRulesCheck.py:1140 msgid "STATUS" msgstr "" #: appPlugins/ToolRulesCheck.py:1106 appPlugins/ToolRulesCheck.py:1130 msgid "FAILED" msgstr "" #: appPlugins/ToolRulesCheck.py:1119 appPlugins/ToolRulesCheck.py:1143 msgid "PASSED" msgstr "" #: appPlugins/ToolRulesCheck.py:1120 appPlugins/ToolRulesCheck.py:1144 msgid "Violations: There are no violations for the current rule." msgstr "" #: appPlugins/ToolRulesCheck.py:1232 msgid "Top" msgstr "" #: appPlugins/ToolRulesCheck.py:1250 msgid "The Top Gerber Copper object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1266 appPlugins/ToolRulesCheck.py:1332 msgid "SM" msgstr "" #: appPlugins/ToolRulesCheck.py:1268 msgid "The Top Gerber Solder Mask object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1286 msgid "The Top Gerber Silkscreen object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1298 msgid "Bottom" msgstr "" #: appPlugins/ToolRulesCheck.py:1316 msgid "The Bottom Gerber Copper object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1334 msgid "The Bottom Gerber Solder Mask object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1352 msgid "The Bottom Gerber Silkscreen object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1381 msgid "The Gerber Outline (Cutout) object for which rules are checked." msgstr "" #: appPlugins/ToolRulesCheck.py:1395 msgid "Excellon objects for which to check rules." msgstr "" #: appPlugins/ToolRulesCheck.py:1414 msgid "" "Excellon object for which to check rules.\n" "Holds the plated holes or a general Excellon file content." msgstr "" #: appPlugins/ToolRulesCheck.py:1433 msgid "" "Excellon object for which to check rules.\n" "Holds the non-plated holes." msgstr "" #: appPlugins/ToolRulesCheck.py:1751 msgid "Run Rules Check" msgstr "" #: appPlugins/ToolShell.py:58 msgid "Type a command to be executed ..." msgstr "" #: appPlugins/ToolShell.py:67 msgid "Clear the text." msgstr "" #: appPlugins/ToolShell.py:102 appPlugins/ToolShell.py:104 msgid "...processing..." msgstr "" #: appPlugins/ToolShell.py:323 msgid "FlatCAM Evo Shell" msgstr "" #: appPlugins/ToolSolderPaste.py:110 appPlugins/ToolSolderPaste.py:1229 msgid "SolderPaste" msgstr "" #: appPlugins/ToolSolderPaste.py:554 msgid "Please enter a tool diameter to add, in Float format." msgstr "" #: appPlugins/ToolSolderPaste.py:642 msgid "Cancelled. Already in the Tool Table." msgstr "" #: appPlugins/ToolSolderPaste.py:746 appPlugins/ToolSolderPaste.py:970 #: appPlugins/ToolSolderPaste.py:1103 appPlugins/ToolSolderPaste.py:1106 #: appPlugins/ToolSolderPaste.py:1165 msgid "Selected object cannot be used." msgstr "" #: appPlugins/ToolSolderPaste.py:777 msgid "Tools table is empty." msgstr "" #: appPlugins/ToolSolderPaste.py:933 msgid "Some or all pads have no solder due of inadequate nozzle diameters..." msgstr "" #: appPlugins/ToolSolderPaste.py:947 msgid "Generating Solder Paste dispensing geometry..." msgstr "" #: appPlugins/ToolSolderPaste.py:1174 msgid "Export GCode ..." msgstr "" #: appPlugins/ToolSolderPaste.py:1250 msgid "A plugin to help dispense solder paste on the PCB pads using a CNC machine." msgstr "" #: appPlugins/ToolSolderPaste.py:1258 msgid "Gerber Solderpaste object." msgstr "" #: appPlugins/ToolSolderPaste.py:1279 msgid "" "Tools pool from which the algorithm\n" "will pick the ones used for dispensing solder paste." msgstr "" #: appPlugins/ToolSolderPaste.py:1301 msgid "" "This is the Tool Number.\n" "The solder dispensing will start with the tool with the biggest \n" "diameter, continuing until there are no more Nozzle tools.\n" "If there are no longer tools but there are still pads not covered\n" " with solder paste, the app will issue a warning message box." msgstr "" #: appPlugins/ToolSolderPaste.py:1308 msgid "" "Tool Diameter. Its value\n" "is the width of the solder paste dispensed." msgstr "" #: appPlugins/ToolSolderPaste.py:1323 msgid "" "Add a new nozzle tool to the Tool Table\n" "with the diameter specified above." msgstr "" #: appPlugins/ToolSolderPaste.py:1391 msgid "Dispense" msgstr "" #: appPlugins/ToolSolderPaste.py:1406 msgid "Z Start" msgstr "" #: appPlugins/ToolSolderPaste.py:1419 msgid "Z Action" msgstr "" #: appPlugins/ToolSolderPaste.py:1432 msgid "Z Stop" msgstr "" #: appPlugins/ToolSolderPaste.py:1658 msgid "Generate solder paste dispensing geometry." msgstr "" #: appPlugins/ToolSolderPaste.py:1670 msgid "" "Geometry Solder Paste object.\n" "The name of the object has to end in:\n" "'_solderpaste' as a protection." msgstr "" #: appPlugins/ToolSolderPaste.py:1679 msgid "CNCJob" msgstr "" #: appPlugins/ToolSolderPaste.py:1689 msgid "Generate CNCJob" msgstr "" #: appPlugins/ToolSolderPaste.py:1692 msgid "" "Generate GCode for Solder Paste dispensing\n" "on PCB pads." msgstr "" #: appPlugins/ToolSolderPaste.py:1705 msgid "" "CNCJob Solder paste object.\n" "In order to enable the GCode save section,\n" "the name of the object has to end in:\n" "'_solderpaste' as a protection." msgstr "" #: appPlugins/ToolSolderPaste.py:1714 msgid "Save GCode" msgstr "" #: appPlugins/ToolSolderPaste.py:1717 msgid "" "Save the generated GCode for Solder Paste dispensing\n" "on PCB pads, to a file." msgstr "" #: appPlugins/ToolSub.py:260 appPlugins/ToolSub.py:498 msgid "No Target object loaded." msgstr "" #: appPlugins/ToolSub.py:263 msgid "Loading geometry from Gerber objects." msgstr "" #: appPlugins/ToolSub.py:281 appPlugins/ToolSub.py:511 msgid "No Subtractor object loaded." msgstr "" #: appPlugins/ToolSub.py:296 msgid "Not possible to subtract from the same object." msgstr "" #: appPlugins/ToolSub.py:336 msgid "Finished parsing geometry for aperture" msgstr "" #: appPlugins/ToolSub.py:338 msgid "Subtraction aperture processing finished." msgstr "" #: appPlugins/ToolSub.py:471 appPlugins/ToolSub.py:666 appPlugins/ToolSub.py:748 msgid "Generating new object failed." msgstr "" #: appPlugins/ToolSub.py:475 appPlugins/ToolSub.py:671 msgid "Created" msgstr "" #: appPlugins/ToolSub.py:524 msgid "Currently, the Subtractor geometry cannot be of type Multigeo." msgstr "" #: appPlugins/ToolSub.py:564 msgid "Parsing solid_geometry ..." msgstr "" #: appPlugins/ToolSub.py:566 msgid "Parsing solid_geometry for tool" msgstr "" #: appPlugins/ToolSub.py:777 msgid "A plugin to help subtract a Gerber/Geometry object from another of the same type." msgstr "" #: appPlugins/ToolSub.py:835 msgid "" "Gerber object from which to subtract\n" "the subtractor Gerber object." msgstr "" #: appPlugins/ToolSub.py:856 appPlugins/ToolSub.py:912 msgid "Subtractor" msgstr "" #: appPlugins/ToolSub.py:858 msgid "" "Gerber object that will be subtracted\n" "from the target Gerber object." msgstr "" #: appPlugins/ToolSub.py:868 msgid "Subtract Gerber" msgstr "" #: appPlugins/ToolSub.py:871 msgid "" "Will remove the area occupied by the subtractor\n" "Gerber from the Target Gerber.\n" "Can be used to remove the overlapping silkscreen\n" "over the soldermask." msgstr "" #: appPlugins/ToolSub.py:891 msgid "GEOMETRY" msgstr "" #: appPlugins/ToolSub.py:897 msgid "" "Geometry object from which to subtract\n" "the subtractor Geometry object." msgstr "" #: appPlugins/ToolSub.py:914 msgid "" "Geometry object that will be subtracted\n" "from the target Geometry object." msgstr "" #: appPlugins/ToolSub.py:935 msgid "Subtract Geometry" msgstr "" #: appPlugins/ToolSub.py:938 msgid "" "Will remove the area occupied by the subtractor\n" "Geometry from the Target Geometry." msgstr "" #: appPlugins/ToolTransform.py:326 msgid "CNCJob objects can't be rotated." msgstr "" #: appPlugins/ToolTransform.py:360 msgid "CNCJob objects can't be mirrored/flipped." msgstr "" #: appPlugins/ToolTransform.py:391 msgid "Skew transformation can not be done for 0, 90 and 180 degrees." msgstr "" #: appPlugins/ToolTransform.py:404 msgid "CNCJob objects can't be skewed." msgstr "" #: appPlugins/ToolTransform.py:420 msgid "Skew on the" msgstr "" #: appPlugins/ToolTransform.py:420 appPlugins/ToolTransform.py:455 #: appPlugins/ToolTransform.py:492 msgid "axis done" msgstr "" #: appPlugins/ToolTransform.py:438 msgid "CNCJob objects can't be scaled." msgstr "" #: appPlugins/ToolTransform.py:455 msgid "Scale on the" msgstr "" #: appPlugins/ToolTransform.py:471 msgid "CNCJob objects can't be offset." msgstr "" #: appPlugins/ToolTransform.py:492 msgid "Offset on the" msgstr "" #: appPlugins/ToolTransform.py:508 msgid "CNCJob objects can't be buffered." msgstr "" #: appPlugins/ToolTransform.py:579 msgid "A plugin that allow geometry transformation." msgstr "" #: appPlugins/ToolTransform.py:654 msgid "" "The object used as reference.\n" "The used point is the center of it's bounding box." msgstr "" #: appProcess.py:172 msgid "processes running." msgstr "" #: appTranslation.py:112 msgid "The application will restart." msgstr "" #: appTranslation.py:113 msgid "Are you sure do you want to change the current language to" msgstr "" #: appTranslation.py:244 msgid "The language will be applied at the next application start." msgstr "" #: appTranslation.py:245 msgid "The user does not have admin rights or UAC issues." msgstr "" #: appTranslation.py:246 appTranslation.py:252 msgid "Quit" msgstr "" #: assets/linux/flatcam-beta.desktop:3 msgid "FlatCAM Beta" msgstr "" #: assets/linux/flatcam-beta.desktop:8 msgid "G-Code from GERBERS" msgstr "" #: camlib.py:710 msgid "self.solid_geometry is neither BaseGeometry or list." msgstr "" #: camlib.py:1153 msgid "Pass" msgstr "" #: camlib.py:1175 msgid "Get Exteriors" msgstr "" #: camlib.py:1178 msgid "Get Interiors" msgstr "" #: camlib.py:2535 msgid "Object was rotated" msgstr "" #: camlib.py:2603 msgid "Object was skewed" msgstr "" #: camlib.py:2674 msgid "Object was buffered" msgstr "" #: camlib.py:2937 msgid "There is no such parameter" msgstr "" #: camlib.py:3154 camlib.py:3198 camlib.py:5045 camlib.py:5474 msgid "Indexing geometry before generating G-Code..." msgstr "" #: camlib.py:3231 msgid "" "The Cut Z parameter has positive value. It is the depth value to drill into material.\n" "The Cut Z parameter needs to have a negative value, assuming it is a typo therefore the " "app will convert the value to negative. Check the resulting CNC code (Gcode etc)." msgstr "" #: camlib.py:3238 msgid "The Cut Z parameter is zero. There will be no cut, aborting" msgstr "" #: camlib.py:3406 camlib.py:3868 msgid "The End X,Y format has to be (x, y)." msgstr "" #: camlib.py:3491 camlib.py:3962 camlib.py:4431 camlib.py:4664 camlib.py:5119 camlib.py:5556 msgid "Starting G-Code for tool with diameter" msgstr "" #: camlib.py:3638 camlib.py:4572 camlib.py:4803 camlib.py:6540 camlib.py:6817 camlib.py:6966 msgid "G91 coordinates not implemented" msgstr "" #: camlib.py:3647 msgid "Finished G-Code generation for tool:" msgstr "" #: camlib.py:3772 camlib.py:4992 camlib.py:5414 msgid "Cut_Z parameter is None or zero. Most likely a bad combinations of other parameters." msgstr "" #: camlib.py:3780 camlib.py:5000 camlib.py:5423 msgid "" "The Cut Z parameter has positive value. It is the depth value to cut into material.\n" "The Cut Z parameter needs to have a negative value, assuming it is a typo therefore the " "app will convert the value to negative.Check the resulting CNC code (Gcode etc)." msgstr "" #: camlib.py:3788 camlib.py:5008 camlib.py:5431 msgid "The Cut Z parameter is zero. There will be no cut, skipping file" msgstr "" #: camlib.py:3793 camlib.py:5013 camlib.py:5437 msgid "Travel Z parameter is None or zero." msgstr "" #: camlib.py:3798 camlib.py:5018 camlib.py:5443 msgid "" "The Travel Z parameter has negative value. It is the height value to travel between " "cuts.\n" "The Z Travel parameter needs to have a positive value, assuming it is a typo therefore " "the app will convert the value to positive.Check the resulting CNC code (Gcode etc)." msgstr "" #: camlib.py:3806 camlib.py:5026 camlib.py:5451 msgid "The Z Travel parameter is zero. This is dangerous, skipping file" msgstr "" #: camlib.py:4087 camlib.py:4861 camlib.py:5192 camlib.py:5637 msgid "Finished G-Code generation" msgstr "" #: camlib.py:4087 camlib.py:5192 camlib.py:5637 camlib.py:5760 msgid "paths traced" msgstr "" #: camlib.py:4140 msgid "" "The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y) \n" "but now there is only one value, not two. " msgstr "" #: camlib.py:4152 camlib.py:4955 camlib.py:5379 msgid "" "The End Move X,Y field in Edit -> Preferences has to be in the format (x, y) but now " "there is only one value, not two." msgstr "" #: camlib.py:4266 msgid "Failed. Drill points inside the exclusion zones." msgstr "" #: camlib.py:4978 msgid "" "The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y) \n" "but now there is only one value, not two." msgstr "" #: camlib.py:5247 msgid "Trying to generate a CNC Job from a Geometry object without solid_geometry." msgstr "" #: camlib.py:5298 msgid "" "The Tool Offset value is too negative to use for the current_geometry.\n" "Raise the value (in module) and try again." msgstr "" #: camlib.py:5668 msgid "There is no tool data in the SolderPaste geometry." msgstr "" #: camlib.py:5760 msgid "Finished SolderPaste G-Code generation" msgstr "" #: camlib.py:6112 msgid "Parsing GCode file. Number of lines" msgstr "" #: camlib.py:6224 msgid "Creating Geometry from the parsed GCode file. " msgstr "" #: camlib.py:6281 msgid "Parsing GCode file for tool diameter" msgstr "" #: camlib.py:6282 msgid "Number of lines" msgstr "" #: camlib.py:6371 msgid "Creating Geometry from the parsed GCode file for tool diameter" msgstr "" #: camlib.py:7135 msgid "G91 coordinates not implemented ..." msgstr "" #: defaults.py:961 defaults.py:1132 msgid "Failed to parse defaults file." msgstr "" #: tclCommands/TclCommandBbox.py:75 tclCommands/TclCommandNregions.py:74 msgid "Expected GerberObject or GeometryObject, got" msgstr "" #: tclCommands/TclCommandBounds.py:67 tclCommands/TclCommandBounds.py:71 msgid "Expected a list of objects names separated by comma. Got" msgstr "" #: tclCommands/TclCommandBounds.py:81 msgid "TclCommand Bounds done." msgstr "" #: tclCommands/TclCommandBuffer.py:97 msgid "Expected -dist " msgstr "" #: tclCommands/TclCommandCopperClear.py:276 msgid "Expected either -box or -all." msgstr "" #: tclCommands/TclCommandGeoCutout.py:142 msgid "The name of the object for which cutout is done is missing. Add it and retry." msgstr "" #: tclCommands/TclCommandGeoCutout.py:186 msgid "" "Gaps value can be only one of: 'none', 'lr', 'tb', '2lr', '2tb', 4 or 8.\n" "Fill in a correct value and retry." msgstr "" #: tclCommands/TclCommandGeoCutout.py:218 msgid "Cancelled. Object type is not supported." msgstr "" #: tclCommands/TclCommandHelp.py:75 msgid "Available commands:" msgstr "" #: tclCommands/TclCommandHelp.py:115 msgid "Type help for usage." msgstr "" #: tclCommands/TclCommandHelp.py:115 msgid "Example: help open_gerber" msgstr "" #: tclCommands/TclCommandPaint.py:231 tclCommands/TclCommandPaint.py:238 msgid "Expected a tuple value like -single 3.2,0.1." msgstr "" #: tclCommands/TclCommandPaint.py:263 tclCommands/TclCommandPaint.py:264 msgid "Expected -box ." msgstr "" #: tclCommands/TclCommandPaint.py:288 msgid "" "None of the following args: 'box', 'single', 'all' were used.\n" "Paint failed." msgstr "" #: tclCommands/TclCommandScale.py:137 tclCommands/TclCommandSkew.py:189 msgid "" "Expected -origin or -origin or -origin
or - origin 3.0,4.2." msgstr "" #: tclCommands/TclCommandSetOrigin.py:95 msgid "Expected a pair of (x, y) coordinates. Got" msgstr "" #: tclCommands/TclCommandSetOrigin.py:120 msgid "Origin set by offsetting all loaded objects with " msgstr "" #: tclCommands/TclCommandSubtractRectangle.py:62 msgid "No Geometry name in args. Provide a name and try again." msgstr "" #~ msgid "" #~ "How much (fraction) of the tool width to overlap each tool pass.\n" #~ "Example:\n" #~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n" #~ "\n" #~ "Adjust the value starting with lower values\n" #~ "and increasing it if areas that should be painted are still \n" #~ "not painted.\n" #~ "Lower values = faster processing, faster execution on PCB.\n" #~ "Higher values = slow processing and slow execution on CNC\n" #~ "due of too many paths." #~ msgstr "" #~ "How much (fraction) of the tool width to overlap each tool pass.\n" #~ "Example:\n" #~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n" #~ "\n" #~ "Adjust the value starting with lower values\n" #~ "and increasing it if areas that should be painted are still \n" #~ "not painted.\n" #~ "Lower values = faster processing, faster execution on PCB.\n" #~ "Higher values = slow processing and slow execution on CNC\n" #~ "due of too many paths." #~| msgid "z_toolchange = Z coord for Toolchange" #~ msgid "z_cut = Z coord for Toolchange" #~ msgstr "z_cut = Z coord for Toolchange" #~| msgid "z_toolchange = Z coord for Toolchange" #~ msgid "z_move = Z coord for Toolchange" #~ msgstr "z_move = Z coord for Toolchange" #~ msgid "%s/Project_%s" #~ msgstr "%s/Project_%s" #~ msgid "plugin_tab" #~ msgstr "plugin_tab"