# Generated by stepconf 1.1 at Thu May 29 11:48:34 2025
# If you make changes to this file, they will be
# overwritten when you run stepconf again

[EMC]
MACHINE = mayo-mill
DEBUG = 0
VERSION = 1.1

[DISPLAY]
DISPLAY = qtvcp qtdragon
PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
EDITOR = gedit
POSITION_OFFSET = RELATIVE
POSITION_FEEDBACK = ACTUAL
ARCDIVISION = 64
GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in
MAX_FEED_OVERRIDE = 1.2
MIN_SPINDLE_OVERRIDE = 0.5
MAX_SPINDLE_OVERRIDE = 1.2
DEFAULT_LINEAR_VELOCITY = 5.00
MIN_LINEAR_VELOCITY = 0
MAX_LINEAR_VELOCITY = 50.00
CYCLE_TIME = 0.100
INTRO_GRAPHIC = linuxcnc.gif
INTRO_TIME = 5
PROGRAM_PREFIX = /home/cnc/linuxcnc/nc_files
INCREMENTS = 5mm 1mm .5mm .1mm .05mm .01mm .005mm

[KINS]
JOINTS = 3
KINEMATICS = trivkins coordinates=XYZ

[FILTER]
PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
PROGRAM_EXTENSION = .py Python Script
PROGRAM_EXTENSION = .nc,.tap G-Code File
png = image-to-gcode
gif = image-to-gcode
jpg = image-to-gcode
py = python

[TASK]
TASK = milltask
CYCLE_TIME = 0.010

[RS274NGC]
PARAMETER_FILE = linuxcnc.var

# start up G/M codes when first loaded
RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9

# subroutine/remap path list
SUBROUTINE_PATH =\
~/linuxcnc/nc_files/examples/ngcgui_lib:\
~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs:\
~/linuxcnc/nc_files/examples/remap-subroutines:\
~/linuxcnc/nc_files/examples/remap_lib

# is the sub, with is called when a error during tool change happens.
ON_ABORT_COMMAND=O <on_abort> call

# The remap code for QtVCP's versaprobe's automatic tool probe of Z
REMAP=M6  modalgroup=6 prolog=change_prolog ngc=qt_auto_probe_tool epilog=change_epilog

# required for python remaps
[PYTHON]
# The path to start a search for user modules. ie python's sys.path.insert(0,PATH)
#PATH_PREPEND = ~/linuxcnc/nc_files/examples/remap_lib/python-stdglue/python

# The path start point for all remap searches ie. python's sys.path.append() 
PATH_APPEND = ~/linuxcnc/nc_files/examples/remap_lib/python-stdglue/python
# path to the tremap's 'oplevel file
TOPLEVEL = ~/linuxcnc/nc_files/examples/remap_lib/python-stdglue/python/toplevel.py
# set remap debug level
#LOG_LEVEL = 1000

[EMCMOT]
EMCMOT = motmod
COMM_TIMEOUT = 1.0
BASE_PERIOD = 100000
SERVO_PERIOD = 1000000

[HAL]
HALFILE = mayo-mill.hal
HALFILE = custom.hal
POSTGUI_HALFILE = postgui_call_list.hal

[TRAJ]
COORDINATES =  X Y Z
LINEAR_UNITS = mm
ANGULAR_UNITS = degree
DEFAULT_LINEAR_VELOCITY = 5.00
MAX_LINEAR_VELOCITY = 50.00

[EMCIO]
EMCIO = io
CYCLE_TIME = 0.100
TOOL_TABLE = tool.tbl
[PROBE]
# pick basic probe or versa probe or remove for none
USE_PROBE = versaprobe
#USE_PROBE = basicprobe

[VERSA_TOOLSETTER]
X = 32.5
Y = 458.5
Z = -30
Z_MAX_CLEAR = -2
MAXPROBE =  40

[CHANGE_POSITION]
X = 10
Y = 10
Z = -2

[MDI_COMMAND_LIST]
# for macro buttons on main oage up to 10 possible
MDI_COMMAND = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
MDI_COMMAND = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
#*** AXIS_X *******************************
[AXIS_X]
MAX_VELOCITY = 50.0
MAX_ACCELERATION = 500.0
MIN_LIMIT = -0.001
MAX_LIMIT = 780.0

[JOINT_0]
TYPE = LINEAR
HOME = 0.0
MIN_LIMIT = -0.001
MAX_LIMIT = 780.0
MAX_VELOCITY = 50.0
MAX_ACCELERATION = 500.0
STEPGEN_MAXACCEL = 625.0
SCALE = 80.0
FERROR = 1
MIN_FERROR = .25
HOME_OFFSET = 0.000000
HOME_SEARCH_VEL = -20.000000
HOME_LATCH_VEL = -6.250000
HOME_SEQUENCE = 2
#******************************************

#*** AXIS_Y *******************************
[AXIS_Y]
MAX_VELOCITY = 50.0
MAX_ACCELERATION = 500.0
MIN_LIMIT = -0.001
MAX_LIMIT = 485.0

[JOINT_1]
TYPE = LINEAR
HOME = 0.0
MIN_LIMIT = -0.001
MAX_LIMIT = 485.0
MAX_VELOCITY = 50.0
MAX_ACCELERATION = 500.0
STEPGEN_MAXACCEL = 625.0
SCALE = 80.0
FERROR = 1
MIN_FERROR = .25
HOME_OFFSET = 0.000000
HOME_SEARCH_VEL = -20.000000
HOME_LATCH_VEL = -6.250000
HOME_SEQUENCE = 1
#******************************************

#*** AXIS_Z *******************************
[AXIS_Z]
MAX_VELOCITY = 25.0
MAX_ACCELERATION = 500.0
MIN_LIMIT = -100.0
MAX_LIMIT = 0.001

[JOINT_2]
TYPE = LINEAR
HOME = 0.0
MIN_LIMIT = -100.0
MAX_LIMIT = 0.001
MAX_VELOCITY = 25.0
MAX_ACCELERATION = 500.0
STEPGEN_MAXACCEL = 625.0
SCALE = 80.0
FERROR = 1
MIN_FERROR = .25
HOME_OFFSET = 0.000000
HOME_SEARCH_VEL = 10.000000
HOME_LATCH_VEL = 6.250000
HOME_SEQUENCE = 0
#******************************************