dodalem kopie stepconf

a.ngc przygotowany do stestowania
linuxcnc.var z zapisanymi pozycjami

.gitignore

@@ -0,0 +1,5 @@
+__pycache__
+*.pickle
+*.pyc
+*.log
+*.preferences

custom.hal

@@ -2,10 +2,3 @@
 # This file will not be overwritten when you run stepconf again
 
 net spindle-on <= spindle.0.on
-
-loadrt debounce cfg=1
-addf debounce.0 base-thread
-setp debounce.0.delay 100
-unlinkp motion.probe-input
-net probe-in debounce.0.0.in
-net probe-filt debounce.0.0.out => motion.probe-input

custom_config.yml

@@ -0,0 +1,83 @@
+# example of a machine specific settings
+windows:
+  mainwindow:
+    kwargs:
+      confirm_exit: false
+
+data_plugins:
+  tooltable:
+    provider: qtpyvcp.plugins.tool_table:ToolTable
+    kwargs:
+      columns: TZDR
+
+  offsettable:
+    provider: qtpyvcp.plugins.offset_table:OffsetTable
+    kwargs:
+      columns: "XYZR"
+
+settings:
+
+  # VTK backplot view settings
+
+  backplot.show-grid:
+    default_value: false
+
+  backplot.show-program-bounds:
+    default_value: false
+
+  backplot.show-program-labels:
+    default_value: false
+
+  backplot.show-program-ticks:
+    default_value: false
+
+  backplot.show-machine-bounds:
+    default_value: false
+
+  backplot.show-machine-labels:
+    default_value: false
+
+  backplot.show-machine-ticks:
+    default_value: false
+
+  backplot.perspective-view:
+    default_value: false
+
+  backplot.multitool-colors:
+    default_value: True
+
+  rack-atc-setup.user-param-1:
+    description: user param label name
+    default_value: user param 1 
+    persistent: true
+
+  rack-atc-setup.user-param-2:
+    description: user param label name
+    default_value: user param 2
+    persistent: true
+
+  rack-atc-setup.user-param-3:
+    description: user param label name
+    default_value: user param 3
+    persistent: true
+
+  rack-atc-setup.user-param-4:
+    description: user param label name
+    default_value: user param 4
+    persistent: true
+
+  rack-atc-setup.user-param-5:
+    description: user param label name
+    default_value: user param 5
+    persistent: true
+
+  tool-setter-probe.user-param-name-1:
+    description: tool setter user param 1
+    default_value: user param 1
+    persistent: true
+
+  tool-setter-probe.user-param-name-2:
+    description: tool setter user param 2
+    default_value: user param 2
+    persistent: true
+

linuxcnc.var

@@ -0,0 +1,119 @@
+5161	0.000000
+5162	0.000000
+5163	0.000000
+5164	0.000000
+5165	0.000000
+5166	0.000000
+5167	0.000000
+5168	0.000000
+5169	0.000000
+5181	35.000000
+5182	459.000000
+5183	-0.000000
+5184	0.000000
+5185	0.000000
+5186	0.000000
+5187	0.000000
+5188	0.000000
+5189	0.000000
+5210	0.000000
+5211	0.000000
+5212	0.000000
+5213	0.000000
+5214	0.000000
+5215	0.000000
+5216	0.000000
+5217	0.000000
+5218	0.000000
+5219	0.000000
+5220	1.000000
+5221	300.000000
+5222	150.000000
+5223	-10.000000
+5224	0.000000
+5225	0.000000
+5226	0.000000
+5227	0.000000
+5228	0.000000
+5229	0.000000
+5230	0.000000
+5241	0.000000
+5242	0.000000
+5243	0.000000
+5244	0.000000
+5245	0.000000
+5246	0.000000
+5247	0.000000
+5248	0.000000
+5249	0.000000
+5250	0.000000
+5261	199.563000
+5262	97.159000
+5263	-30.157000
+5264	0.000000
+5265	0.000000
+5266	0.000000
+5267	0.000000
+5268	0.000000
+5269	0.000000
+5270	0.000000
+5281	0.000000
+5282	0.000000
+5283	0.000000
+5284	0.000000
+5285	0.000000
+5286	0.000000
+5287	0.000000
+5288	0.000000
+5289	0.000000
+5290	0.000000
+5301	0.000000
+5302	0.000000
+5303	0.000000
+5304	0.000000
+5305	0.000000
+5306	0.000000
+5307	0.000000
+5308	0.000000
+5309	0.000000
+5310	0.000000
+5321	0.000000
+5322	0.000000
+5323	0.000000
+5324	0.000000
+5325	0.000000
+5326	0.000000
+5327	0.000000
+5328	0.000000
+5329	0.000000
+5330	0.000000
+5341	0.000000
+5342	0.000000
+5343	0.000000
+5344	0.000000
+5345	0.000000
+5346	0.000000
+5347	0.000000
+5348	0.000000
+5349	0.000000
+5350	0.000000
+5361	0.000000
+5362	0.000000
+5363	0.000000
+5364	0.000000
+5365	0.000000
+5366	0.000000
+5367	0.000000
+5368	0.000000
+5369	0.000000
+5370	0.000000
+5381	0.000000
+5382	0.000000
+5383	0.000000
+5384	0.000000
+5385	0.000000
+5386	0.000000
+5387	0.000000
+5388	0.000000
+5389	0.000000
+5390	0.000000

linuxcnc.var.bak

@@ -0,0 +1,119 @@
+5161	0.000000
+5162	0.000000
+5163	0.000000
+5164	0.000000
+5165	0.000000
+5166	0.000000
+5167	0.000000
+5168	0.000000
+5169	0.000000
+5181	35.000000
+5182	459.000000
+5183	-0.000000
+5184	0.000000
+5185	0.000000
+5186	0.000000
+5187	0.000000
+5188	0.000000
+5189	0.000000
+5210	0.000000
+5211	0.000000
+5212	0.000000
+5213	0.000000
+5214	0.000000
+5215	0.000000
+5216	0.000000
+5217	0.000000
+5218	0.000000
+5219	0.000000
+5220	1.000000
+5221	300.000000
+5222	150.000000
+5223	-10.000000
+5224	0.000000
+5225	0.000000
+5226	0.000000
+5227	0.000000
+5228	0.000000
+5229	0.000000
+5230	0.000000
+5241	0.000000
+5242	0.000000
+5243	0.000000
+5244	0.000000
+5245	0.000000
+5246	0.000000
+5247	0.000000
+5248	0.000000
+5249	0.000000
+5250	0.000000
+5261	199.563000
+5262	97.159000
+5263	-30.157000
+5264	0.000000
+5265	0.000000
+5266	0.000000
+5267	0.000000
+5268	0.000000
+5269	0.000000
+5270	0.000000
+5281	0.000000
+5282	0.000000
+5283	0.000000
+5284	0.000000
+5285	0.000000
+5286	0.000000
+5287	0.000000
+5288	0.000000
+5289	0.000000
+5290	0.000000
+5301	0.000000
+5302	0.000000
+5303	0.000000
+5304	0.000000
+5305	0.000000
+5306	0.000000
+5307	0.000000
+5308	0.000000
+5309	0.000000
+5310	0.000000
+5321	0.000000
+5322	0.000000
+5323	0.000000
+5324	0.000000
+5325	0.000000
+5326	0.000000
+5327	0.000000
+5328	0.000000
+5329	0.000000
+5330	0.000000
+5341	0.000000
+5342	0.000000
+5343	0.000000
+5344	0.000000
+5345	0.000000
+5346	0.000000
+5347	0.000000
+5348	0.000000
+5349	0.000000
+5350	0.000000
+5361	0.000000
+5362	0.000000
+5363	0.000000
+5364	0.000000
+5365	0.000000
+5366	0.000000
+5367	0.000000
+5368	0.000000
+5369	0.000000
+5370	0.000000
+5381	0.000000
+5382	0.000000
+5383	0.000000
+5384	0.000000
+5385	0.000000
+5386	0.000000
+5387	0.000000
+5388	0.000000
+5389	0.000000
+5390	0.000000

mayo-mill-probebasic.hal

@@ -2,7 +2,7 @@
 # If you make changes to this file, they will be
 # overwritten when you run stepconf again
 loadrt [KINS]KINEMATICS
-loadrt [EMCMOT]EMCMOT base_period_nsec=[EMCMOT]BASE_PERIOD servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[KINS]JOINTS
+loadrt [EMCMOT]EMCMOT base_period_nsec=[EMCMOT]BASE_PERIOD servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[KINS]JOINTS num_dio=6 num_aio=3
 loadrt hal_parport cfg="0 out"
 setp parport.0.reset-time 5000
 loadrt stepgen step_type=0,0,0
@@ -78,7 +78,7 @@ net home-z => joint.2.home-sw-in
 net estop-out <= iocontrol.0.user-enable-out
 net estop-ext => iocontrol.0.emc-enable-in
 
-net tool-change  <= iocontrol.0.tool-change
+net tool-change-request  <= iocontrol.0.tool-change
-net tool-changed  => iocontrol.0.tool-changed
+net tool-change-confirmed  => iocontrol.0.tool-changed
 net tool-number <= iocontrol.0.tool-prep-number
-net tool-prepare-loopback iocontrol.0.tool-prepare => iocontrol.0.tool-prepared
+net tool-prepare-loopback iocontrol.0.tool-prepare => iocontrol.0.tool-prepared

mayo-mill-probebasic.ini

@@ -3,33 +3,48 @@
 # overwritten when you run stepconf again
 
 [EMC]
-MACHINE = mayo-mill
+MACHINE = mayo-mill-probebasic
 DEBUG = 0
 VERSION = 1.1
 
 [DISPLAY]
-DISPLAY = qtvcp qtdragon
+DISPLAY = probe_basic
-PREFERENCE_FILE_PATH = WORKINGFOLDER/qtdragon.pref
+OPEN_FILE = ~/linuxcnc/nc_files/pb_examples/blank.ngc
-EDITOR = gedit
+CONFIG_FILE = custom_config.yml
+LOG_FILE = mayo-mill-probebasic.log
+LOG_LEVEL = DEBUG
+#PROGRAM_PREFIX = /home/cnc/linuxcnc/nc_files
+INTRO_GRAPHIC = pbsplash.png
+INTRO_TIME = 5
+
+#ARCDIVISION = 64
+#GRIDS = 10mm 20mm 50mm 100mm
+
+GEOMETRY = xyz
+INCREMENTS = JOG 10mm 1mm .1mm .01mm
 POSITION_OFFSET = RELATIVE
 POSITION_FEEDBACK = ACTUAL
-ARCDIVISION = 64
-GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in
 MAX_FEED_OVERRIDE = 1.2
-MIN_SPINDLE_OVERRIDE = 0.5
 MAX_SPINDLE_OVERRIDE = 1.2
-DEFAULT_LINEAR_VELOCITY = 5.00
+MIN_SPINDLE_OVERRIDE = 0.5
 MIN_LINEAR_VELOCITY = 0
 MAX_LINEAR_VELOCITY = 50.00
-CYCLE_TIME = 0.100
+DEFAULT_LINEAR_VELOCITY = 5.00
-INTRO_GRAPHIC = linuxcnc.gif
-INTRO_TIME = 5
-PROGRAM_PREFIX = /home/cnc/linuxcnc/nc_files
-INCREMENTS = 5mm 1mm .5mm .1mm .05mm .01mm .005mm
 
-[KINS]
+USER_TABS_PATH = user_tabs/
-JOINTS = 3
+USER_BUTTONS_PATH = user_buttons/
-KINEMATICS = trivkins coordinates=XYZ
+USER_DROS_PATH = user_dro_display/
+DRO_DISPLAY = xyz
+# ATC tab display options, 0 = no atc tab displayed, 1 = Carousel atc display, 2 = rack atc display
+ATC_TAB_DISPLAY = 0
+#USER_ATC_BUTTONS_PATH = user_atc_buttons/
+CYCLE_TIME = 0.100
+
+KEYBOARD_JOG = true
+KEYBOARD_JOG_SAFETY_OFF = true
+
+
+TOOL_TABLE_COLUMNS = TZDR
 
 [FILTER]
 PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
@@ -40,40 +55,31 @@ gif = image-to-gcode
 jpg = image-to-gcode
 py = python
 
+[PYTHON]
+TOPLEVEL = ./python/toplevel.py
+PATH_APPEND = ./python/
+
 [TASK]
 TASK = milltask
 CYCLE_TIME = 0.010
 
 [RS274NGC]
-PARAMETER_FILE = linuxcnc.var
-
-# start up G/M codes when first loaded
 RS274NGC_STARTUP_CODE = G17 G21 G40 G43H0 G54 G64P0.0127 G80 G90 G94 G97 M5 M9
-
+#RS274NGC_STARTUP_CODE = F10 S300 G20 G17 G40 G49 G54 G64 P.001 G80 G90 G91.1 G92.1 G94 G97 G98
-# subroutine/remap path list
+PARAMETER_FILE = linuxcnc.var
-SUBROUTINE_PATH =\
+OWORD_NARGS = 1
-~/linuxcnc/nc_files/examples/ngcgui_lib:\
+NO_DOWNCASE_OWORD = 1
-~/linuxcnc/nc_files/examples/ngcgui_lib/utilitysubs:\
+SUBROUTINE_PATH = subroutines
-~/linuxcnc/nc_files/examples/remap-subroutines:\
-~/linuxcnc/nc_files/examples/remap_lib
-
-# is the sub, with is called when a error during tool change happens.
-ON_ABORT_COMMAND=O <on_abort> call
 
 # The remap code for QtVCP's versaprobe's automatic tool probe of Z
-REMAP=M6  modalgroup=6 prolog=change_prolog ngc=qt_auto_probe_tool epilog=change_epilog
+REMAP=M6  modalgroup=6 prolog=change_prolog ngc=aaa epilog=change_epilog
 
-# required for python remaps
+[HAL]
-[PYTHON]
+HALUI = halui
-# The path to start a search for user modules. ie python's sys.path.insert(0,PATH)
+HALFILE = mayo-mill-probebasic.hal
-#PATH_PREPEND = ~/linuxcnc/nc_files/examples/remap_lib/python-stdglue/python
+HALFILE = custom.hal
-
+POSTGUI_HALFILE = probe_basic_postgui.hal
-# The path start point for all remap searches ie. python's sys.path.append() 
+TWOPASS = one
-PATH_APPEND = ~/linuxcnc/nc_files/examples/remap_lib/python-stdglue/python
-# path to the tremap's 'oplevel file
-TOPLEVEL = ~/linuxcnc/nc_files/examples/remap_lib/python-stdglue/python/toplevel.py
-# set remap debug level
-#LOG_LEVEL = 1000
 
 [EMCMOT]
 EMCMOT = motmod
@@ -81,43 +87,28 @@ COMM_TIMEOUT = 1.0
 BASE_PERIOD = 100000
 SERVO_PERIOD = 1000000
 
-[HAL]
-HALFILE = mayo-mill.hal
-HALFILE = custom.hal
-POSTGUI_HALFILE = postgui_call_list.hal
-
-[TRAJ]
-COORDINATES =  X Y Z
-LINEAR_UNITS = mm
-ANGULAR_UNITS = degree
-DEFAULT_LINEAR_VELOCITY = 5.00
-MAX_LINEAR_VELOCITY = 50.00
-
 [EMCIO]
 EMCIO = io
 CYCLE_TIME = 0.100
 TOOL_TABLE = tool.tbl
-[PROBE]
-# pick basic probe or versa probe or remove for none
-USE_PROBE = versaprobe
-#USE_PROBE = basicprobe
-
-[VERSA_TOOLSETTER]
-X = 32.5
-Y = 458.5
-Z = -30
-Z_MAX_CLEAR = -2
-MAXPROBE =  40
 
 [CHANGE_POSITION]
 X = 10
 Y = 10
 Z = -2
 
-[MDI_COMMAND_LIST]
+[KINS]
-# for macro buttons on main oage up to 10 possible
+JOINTS = 3
-MDI_COMMAND = G0 Z25;X0 Y0;Z0, Goto\nUser\nZero
+KINEMATICS = trivkins coordinates=XYZ
-MDI_COMMAND = G53 G0 Z0;G53 G0 X0 Y0,Goto\nMachn\nZero
+
+[TRAJ]
+AXES = 3
+COORDINATES =  X Y Z
+LINEAR_UNITS = mm
+ANGULAR_UNITS = degree
+DEFAULT_LINEAR_VELOCITY = 5.00
+MAX_LINEAR_VELOCITY = 50.00
+
 #*** AXIS_X *******************************
 [AXIS_X]
 MAX_VELOCITY = 50.0

mayo-mill.stepconf

@@ -0,0 +1,245 @@
+<?xml version="1.0" ?>
+<stepconf>
+  <property type="int" name="ahomepos" value="0"/>
+  <property type="int" name="ahomesw" value="0"/>
+  <property type="float" name="ahomevel" value="0.05"/>
+  <property type="int" name="alatchdir" value="0"/>
+  <property type="int" name="aleadscrew" value="360"/>
+  <property type="int" name="amaxacc" value="1200"/>
+  <property type="int" name="amaxlim" value="9999"/>
+  <property type="int" name="amaxvel" value="360"/>
+  <property type="int" name="amicrostep" value="2"/>
+  <property type="int" name="aminlim" value="-9999"/>
+  <property type="int" name="apulleyden" value="1"/>
+  <property type="int" name="apulleynum" value="1"/>
+  <property type="int" name="ascale" value="0"/>
+  <property type="int" name="asteprev" value="200"/>
+  <property type="int" name="axes" value="0"/>
+  <property type="eval" name="axislist" value="[]"/>
+  <property type="bool" name="classicladder" value="False"/>
+  <property type="bool" name="createshortcut" value="True"/>
+  <property type="bool" name="createsymlink" value="True"/>
+  <property type="int" name="customhal" value="1"/>
+  <property type="float" name="digitsin" value="15.0"/>
+  <property type="float" name="digitsout" value="15.0"/>
+  <property type="float" name="dirhold" value="20000.0"/>
+  <property type="float" name="dirsetup" value="20000.0"/>
+  <property type="string" name="drivertype" value="other"/>
+  <property type="float" name="floatsin" value="10.0"/>
+  <property type="float" name="floatsout" value="10.0"/>
+  <property type="bool" name="halui" value="False"/>
+  <property type="eval" name="halui_list" value="[]"/>
+  <property type="string" name="ioaddr" value="0"/>
+  <property type="string" name="ioaddr2" value="0"/>
+  <property type="string" name="ioaddr3" value="2"/>
+  <property type="bool" name="ladderconnect" value="True"/>
+  <property type="int" name="ladderhaltype" value="0"/>
+  <property type="string" name="laddername" value="custom.clp"/>
+  <property type="float" name="latency" value="50000.0"/>
+  <property type="eval" name="lparport" value="['0']"/>
+  <property type="string" name="machinename" value="mayo-mill"/>
+  <property type="bool" name="manualtoolchange" value="True"/>
+  <property type="eval" name="md5sums" value="[]"/>
+  <property type="bool" name="modbus" value="False"/>
+  <property type="int" name="number_pports" value="1"/>
+  <property type="int" name="ohmiccontact" value="0"/>
+  <property type="int" name="period" value="25000"/>
+  <property type="string" name="pin1" value="spindle-on"/>
+  <property type="string" name="pin10" value="home-x"/>
+  <property type="bool" name="pin10inv" value="False"/>
+  <property type="string" name="pin11" value="home-y"/>
+  <property type="bool" name="pin11inv" value="False"/>
+  <property type="string" name="pin12" value="home-z"/>
+  <property type="bool" name="pin12inv" value="False"/>
+  <property type="string" name="pin13" value="estop-ext"/>
+  <property type="bool" name="pin13inv" value="True"/>
+  <property type="string" name="pin14" value="unused-output"/>
+  <property type="bool" name="pin14inv" value="False"/>
+  <property type="string" name="pin15" value="probe-in"/>
+  <property type="bool" name="pin15inv" value="False"/>
+  <property type="string" name="pin16" value="unused-output"/>
+  <property type="bool" name="pin16inv" value="False"/>
+  <property type="string" name="pin17" value="unused-output"/>
+  <property type="bool" name="pin17inv" value="False"/>
+  <property type="bool" name="pin1inv" value="True"/>
+  <property type="string" name="pin2" value="xdir"/>
+  <property type="bool" name="pin2inv" value="False"/>
+  <property type="string" name="pin3" value="xstep"/>
+  <property type="bool" name="pin3inv" value="False"/>
+  <property type="string" name="pin4" value="ydir"/>
+  <property type="bool" name="pin4inv" value="False"/>
+  <property type="string" name="pin5" value="ystep"/>
+  <property type="bool" name="pin5inv" value="False"/>
+  <property type="string" name="pin6" value="zdir"/>
+  <property type="bool" name="pin6inv" value="False"/>
+  <property type="string" name="pin7" value="zstep"/>
+  <property type="bool" name="pin7inv" value="False"/>
+  <property type="string" name="pin8" value="unused-output"/>
+  <property type="bool" name="pin8inv" value="False"/>
+  <property type="string" name="pin9" value="unused-output"/>
+  <property type="bool" name="pin9inv" value="False"/>
+  <property type="int" name="pp2_direction" value="0"/>
+  <property type="string" name="pp2_pin1" value="unused-output"/>
+  <property type="string" name="pp2_pin10_in" value="unused-input"/>
+  <property type="int" name="pp2_pin10_in_inv" value="0"/>
+  <property type="string" name="pp2_pin11_in" value="unused-input"/>
+  <property type="int" name="pp2_pin11_in_inv" value="0"/>
+  <property type="string" name="pp2_pin12_in" value="unused-input"/>
+  <property type="int" name="pp2_pin12_in_inv" value="0"/>
+  <property type="string" name="pp2_pin13_in" value="unused-input"/>
+  <property type="int" name="pp2_pin13_in_inv" value="0"/>
+  <property type="string" name="pp2_pin14" value="unused-output"/>
+  <property type="int" name="pp2_pin14inv" value="0"/>
+  <property type="string" name="pp2_pin15_in" value="unused-input"/>
+  <property type="int" name="pp2_pin15_in_inv" value="0"/>
+  <property type="string" name="pp2_pin16" value="unused-output"/>
+  <property type="int" name="pp2_pin16inv" value="0"/>
+  <property type="string" name="pp2_pin17" value="unused-output"/>
+  <property type="int" name="pp2_pin17inv" value="0"/>
+  <property type="int" name="pp2_pin1inv" value="0"/>
+  <property type="string" name="pp2_pin2" value="unused-output"/>
+  <property type="string" name="pp2_pin2_in" value="unused-input"/>
+  <property type="int" name="pp2_pin2_in_inv" value="0"/>
+  <property type="int" name="pp2_pin2inv" value="0"/>
+  <property type="string" name="pp2_pin3" value="unused-output"/>
+  <property type="string" name="pp2_pin3_in" value="unused-input"/>
+  <property type="int" name="pp2_pin3_in_inv" value="0"/>
+  <property type="int" name="pp2_pin3inv" value="0"/>
+  <property type="string" name="pp2_pin4" value="unused-output"/>
+  <property type="string" name="pp2_pin4_in" value="unused-input"/>
+  <property type="int" name="pp2_pin4_in_inv" value="0"/>
+  <property type="int" name="pp2_pin4inv" value="0"/>
+  <property type="string" name="pp2_pin5" value="unused-output"/>
+  <property type="string" name="pp2_pin5_in" value="unused-input"/>
+  <property type="int" name="pp2_pin5_in_inv" value="0"/>
+  <property type="int" name="pp2_pin5inv" value="0"/>
+  <property type="string" name="pp2_pin6" value="unused-output"/>
+  <property type="string" name="pp2_pin6_in" value="unused-input"/>
+  <property type="int" name="pp2_pin6_in_inv" value="0"/>
+  <property type="int" name="pp2_pin6inv" value="0"/>
+  <property type="string" name="pp2_pin7" value="unused-output"/>
+  <property type="string" name="pp2_pin7_in" value="unused-input"/>
+  <property type="int" name="pp2_pin7_in_inv" value="0"/>
+  <property type="int" name="pp2_pin7inv" value="0"/>
+  <property type="string" name="pp2_pin8" value="unused-output"/>
+  <property type="string" name="pp2_pin8_in" value="unused-input"/>
+  <property type="int" name="pp2_pin8_in_inv" value="0"/>
+  <property type="int" name="pp2_pin8inv" value="0"/>
+  <property type="string" name="pp2_pin9" value="unused-output"/>
+  <property type="string" name="pp2_pin9_in" value="unused-input"/>
+  <property type="int" name="pp2_pin9_in_inv" value="0"/>
+  <property type="int" name="pp2_pin9inv" value="0"/>
+  <property type="int" name="pp3_direction" value="0"/>
+  <property type="bool" name="pyvcp" value="False"/>
+  <property type="bool" name="pyvcpconnect" value="True"/>
+  <property type="int" name="pyvcphaltype" value="0"/>
+  <property type="string" name="pyvcpname" value="custom.xml"/>
+  <property type="eval" name="qtplasmac_bcodes" value="['ohmic-test', 'probe-test 10', 'single-cut', 'cut-type', 'torch-pulse 0.5', 'framing', 'user-manual', '', '', '', '', '', '', '', '', '', '', '', '', '']"/>
+  <property type="eval" name="qtplasmac_bnames" value="['OHMIC\\TEST', 'PROBE\\TEST', 'SINGLE\\CUT', 'NORMAL\\CUT', 'TORCH\\PULSE', 'FRAMING', 'USER\\MANUAL', '', '', '', '', '', '', '', '', '', '', '', '', '']"/>
+  <property type="int" name="qtplasmacdro" value="0"/>
+  <property type="int" name="qtplasmacerror" value="0"/>
+  <property type="int" name="qtplasmacestop" value="0"/>
+  <property type="int" name="qtplasmacmode" value="0"/>
+  <property type="int" name="qtplasmacpause" value="0"/>
+  <property type="string" name="qtplasmacpmx" value=""/>
+  <property type="int" name="qtplasmacscreen" value="0"/>
+  <property type="int" name="qtplasmacstart" value="0"/>
+  <property type="int" name="qtplasmacstop" value="0"/>
+  <property type="float" name="s32in" value="10.0"/>
+  <property type="float" name="s32out" value="10.0"/>
+  <property type="bool" name="select_axis" value="False"/>
+  <property type="bool" name="select_gmoccapy" value="False"/>
+  <property type="bool" name="select_qtdragon" value="True"/>
+  <property type="bool" name="select_qtplasmac" value="False"/>
+  <property type="bool" name="sim_hardware" value="False"/>
+  <property type="int" name="spindlecarrier" value="100"/>
+  <property type="int" name="spindlecpr" value="100"/>
+  <property type="float" name="spindlefiltergain" value="0.01"/>
+  <property type="float" name="spindlenearscale" value="1.5"/>
+  <property type="float" name="spindlepwm1" value="0.2"/>
+  <property type="float" name="spindlepwm2" value="0.8"/>
+  <property type="int" name="spindlespeed1" value="100"/>
+  <property type="int" name="spindlespeed2" value="800"/>
+  <property type="float" name="stepspace" value="5000.0"/>
+  <property type="float" name="steptime" value="5000.0"/>
+  <property type="eval" name="tandemjoints" value="[]"/>
+  <property type="int" name="tempexists" value="0"/>
+  <property type="int" name="thcadenc" value="0"/>
+  <property type="int" name="uhomepos" value="0"/>
+  <property type="int" name="uhomesw" value="0"/>
+  <property type="float" name="uhomevel" value="1.5"/>
+  <property type="int" name="ulatchdir" value="0"/>
+  <property type="int" name="uleadscrew" value="5"/>
+  <property type="int" name="umaxacc" value="750"/>
+  <property type="int" name="umaxlim" value="200"/>
+  <property type="int" name="umaxvel" value="25"/>
+  <property type="int" name="umicrostep" value="2"/>
+  <property type="int" name="uminlim" value="0"/>
+  <property type="int" name="units" value="1"/>
+  <property type="int" name="upulleyden" value="1"/>
+  <property type="int" name="upulleynum" value="1"/>
+  <property type="int" name="uscale" value="0"/>
+  <property type="bool" name="usespindleatspeed" value="False"/>
+  <property type="int" name="usteprev" value="200"/>
+  <property type="int" name="vhomepos" value="0"/>
+  <property type="int" name="vhomesw" value="0"/>
+  <property type="float" name="vhomevel" value="1.5"/>
+  <property type="int" name="vlatchdir" value="0"/>
+  <property type="int" name="vleadscrew" value="5"/>
+  <property type="int" name="vmaxacc" value="750"/>
+  <property type="int" name="vmaxlim" value="200"/>
+  <property type="int" name="vmaxvel" value="25"/>
+  <property type="int" name="vmicrostep" value="2"/>
+  <property type="int" name="vminlim" value="0"/>
+  <property type="string" name="voltsfjumper" value="64"/>
+  <property type="float" name="voltsfullf" value="999.0"/>
+  <property type="string" name="voltsmodel" value="10"/>
+  <property type="int" name="voltsrdiv" value="20"/>
+  <property type="float" name="voltszerof" value="100.0"/>
+  <property type="int" name="vpulleyden" value="1"/>
+  <property type="int" name="vpulleynum" value="1"/>
+  <property type="int" name="vscale" value="0"/>
+  <property type="int" name="vsteprev" value="200"/>
+  <property type="float" name="xhomepos" value="0.0"/>
+  <property type="float" name="xhomesw" value="0.0"/>
+  <property type="float" name="xhomevel" value="-20.0"/>
+  <property type="int" name="xlatchdir" value="0"/>
+  <property type="float" name="xleadscrew" value="5.0"/>
+  <property type="float" name="xmaxacc" value="500.0"/>
+  <property type="float" name="xmaxlim" value="780.0"/>
+  <property type="float" name="xmaxvel" value="50.0"/>
+  <property type="float" name="xmicrostep" value="2.0"/>
+  <property type="float" name="xminlim" value="0.0"/>
+  <property type="float" name="xpulleyden" value="1.0"/>
+  <property type="float" name="xpulleynum" value="1.0"/>
+  <property type="float" name="xscale" value="80.0"/>
+  <property type="float" name="xsteprev" value="200.0"/>
+  <property type="float" name="yhomepos" value="0.0"/>
+  <property type="float" name="yhomesw" value="0.0"/>
+  <property type="float" name="yhomevel" value="-20.0"/>
+  <property type="int" name="ylatchdir" value="0"/>
+  <property type="float" name="yleadscrew" value="5.0"/>
+  <property type="float" name="ymaxacc" value="500.0"/>
+  <property type="float" name="ymaxlim" value="485.0"/>
+  <property type="float" name="ymaxvel" value="50.0"/>
+  <property type="float" name="ymicrostep" value="2.0"/>
+  <property type="float" name="yminlim" value="0.0"/>
+  <property type="float" name="ypulleyden" value="1.0"/>
+  <property type="float" name="ypulleynum" value="1.0"/>
+  <property type="float" name="yscale" value="80.0"/>
+  <property type="float" name="ysteprev" value="200.0"/>
+  <property type="float" name="zhomepos" value="0.0"/>
+  <property type="float" name="zhomesw" value="0.0"/>
+  <property type="float" name="zhomevel" value="10.0"/>
+  <property type="int" name="zlatchdir" value="0"/>
+  <property type="float" name="zleadscrew" value="5.0"/>
+  <property type="float" name="zmaxacc" value="500.0"/>
+  <property type="float" name="zmaxlim" value="0.0"/>
+  <property type="float" name="zmaxvel" value="25.0"/>
+  <property type="float" name="zmicrostep" value="2.0"/>
+  <property type="float" name="zminlim" value="-100.0"/>
+  <property type="float" name="zpulleyden" value="1.0"/>
+  <property type="float" name="zpulleynum" value="1.0"/>
+  <property type="float" name="zscale" value="80.0"/>
+  <property type="float" name="zsteprev" value="200.0"/>
+</stepconf>

probe_basic.var

@@ -0,0 +1,210 @@
+3000	0.000000
+3001	0.000000
+3002	0.000000
+3003	0.000000
+3004	0.000000
+3005	0.000000
+3006	0.000000
+3007	0.000000
+3008	0.000000
+3009	0.000000
+3010	0.000000
+3011	0.000000
+3012	0.000000
+3013	0.000000
+3014	0.000000
+3015	0.000000
+3016	0.000000
+3017	0.000000
+3018	0.000000
+3019	0.000000
+3020	0.000000
+3021	0.000000
+3022	0.000000
+3023	0.000000
+3024	0.000000
+3025	0.000000
+3026	0.000000
+3027	0.000000
+3028	0.000000
+3029	0.000000
+3030	0.000000
+3031	0.000000
+3032	0.000000
+3033	0.000000
+3034	0.000000
+3035	0.000000
+3036	0.000000
+3037	0.000000
+3038	0.000000
+3039	0.000000
+3050	0.000000
+3051	0.000000
+3052	0.000000
+3053	0.000000
+3054	0.000000
+3979	0.000000
+3980	6.000000
+3981	0.000000
+3982	0.000000
+3983	0.000000
+3984	0.000000
+3985	0.000000
+3986	0.000000
+3987	0.000000
+3988	0.000000
+3989	0.000000
+3990	0.000000
+3991	0.000000
+3992	0.000000
+3993	0.000000
+3994	0.000000
+3995	0.000000
+3996	0.000000
+3997	0.000000
+3998	0.000000
+3999	0.000000
+4000	0.000000
+4001	0.000000
+4002	0.000000
+4003	0.000000
+4004	0.000000
+4005	0.000000
+4006	0.000000
+4007	0.000000
+4008	0.000000
+4009	0.000000
+4010	0.000000
+4011	0.000000
+4012	0.000000
+4013	0.000000
+4014	0.000000
+4015	0.000000
+4016	0.000000
+4017	0.000000
+4018	0.000000
+4019	0.000000
+4020	0.000000
+4021	0.000000
+4022	0.000000
+4023	0.000000
+4024	0.000000
+5161	0.000000
+5162	0.000000
+5163	0.000000
+5164	0.000000
+5165	0.000000
+5166	0.000000
+5167	0.000000
+5168	0.000000
+5169	0.000000
+5181	0.000000
+5182	0.000000
+5183	0.000000
+5184	0.000000
+5185	0.000000
+5186	0.000000
+5187	0.000000
+5188	0.000000
+5189	0.000000
+5210	0.000000
+5211	0.000000
+5212	0.000000
+5213	0.000000
+5214	0.000000
+5215	0.000000
+5216	0.000000
+5217	0.000000
+5218	0.000000
+5219	0.000000
+5220	1.000000
+5221	0.000000
+5222	0.000000
+5223	0.000000
+5224	0.000000
+5225	0.000000
+5226	0.000000
+5227	0.000000
+5228	0.000000
+5229	0.000000
+5230	0.000000
+5241	0.000000
+5242	0.000000
+5243	0.000000
+5244	0.000000
+5245	0.000000
+5246	0.000000
+5247	0.000000
+5248	0.000000
+5249	0.000000
+5250	0.000000
+5261	0.000000
+5262	0.000000
+5263	0.000000
+5264	0.000000
+5265	0.000000
+5266	0.000000
+5267	0.000000
+5268	0.000000
+5269	0.000000
+5270	0.000000
+5281	0.000000
+5282	0.000000
+5283	0.000000
+5284	0.000000
+5285	0.000000
+5286	0.000000
+5287	0.000000
+5288	0.000000
+5289	0.000000
+5290	0.000000
+5301	0.000000
+5302	0.000000
+5303	0.000000
+5304	0.000000
+5305	0.000000
+5306	0.000000
+5307	0.000000
+5308	0.000000
+5309	0.000000
+5310	0.000000
+5321	0.000000
+5322	0.000000
+5323	0.000000
+5324	0.000000
+5325	0.000000
+5326	0.000000
+5327	0.000000
+5328	0.000000
+5329	0.000000
+5330	0.000000
+5341	0.000000
+5342	0.000000
+5343	0.000000
+5344	0.000000
+5345	0.000000
+5346	0.000000
+5347	0.000000
+5348	0.000000
+5349	0.000000
+5350	0.000000
+5361	0.000000
+5362	0.000000
+5363	0.000000
+5364	0.000000
+5365	0.000000
+5366	0.000000
+5367	0.000000
+5368	0.000000
+5369	0.000000
+5370	0.000000
+5381	0.000000
+5382	0.000000
+5383	0.000000
+5384	0.000000
+5385	0.000000
+5386	0.000000
+5387	0.000000
+5388	0.000000
+5389	0.000000
+5390	0.000000

probe_basic_postgui.hal

@@ -0,0 +1,25 @@
+loadrt time
+loadrt not
+
+addf time.0 servo-thread
+addf not.0 servo-thread
+
+net prog-running not.0.in <= halui.program.is-idle
+net prog-paused halui.program.is-paused => time.0.pause
+net cycle-timer time.0.start <= not.0.out
+net cycle-seconds qtpyvcp.timerseconds.in <= time.0.seconds
+net cycle-minutes qtpyvcp.timerminutes.in <= time.0.minutes
+net cycle-hours qtpyvcp.timerhours.in <= time.0.hours
+# *** Time items required for Probe Basic to run ***
+
+#  ---manual tool change signals---
+net tool-change-request     =>  qtpyvcp_manualtoolchange.change
+net tool-change-confirmed   <=  qtpyvcp_manualtoolchange.changed
+net tool-number             =>  qtpyvcp_manualtoolchange.number
+
+# *** Probe graphic simulation trigger push probe tip ***
+# net probe-in  =>  qtpyvcp.probe-in.out
+net probe-in  <=  qtpyvcp.probe-led.on
+
+# *** Set line below for actual spindle readout from your hal file ***
+# net spindle-rpm-filtered scale_to_rpm.out  =>  qtpyvcp.spindle-encoder-rpm.in

probe_basic_required_ini_items.ini

@@ -0,0 +1,38 @@
+# These ini configuration items are required for probe basic.
+# please compare contrast to your machine ini configuration
+# and edit any matching existing items and/or add any items
+# that are not under the corresponding ini sections.
+
+[DISPLAY]
+DISPLAY = probe_basic
+OPEN_FILE = ~/linuxcnc/nc_files/pb_examples/blank.ngc
+CONFIG_FILE = custom_config.yml
+MAX_FEED_OVERRIDE = 2.000000            # Recommended Setting for Probe Basic
+MAX_SPINDLE_OVERRIDE = 2.000000         # Recommended Setting for Probe Basic
+MIN_SPINDLE_OVERRIDE = 0.500000         # Recommended Setting for Probe Basic
+INTRO_GRAPHIC = pbsplash.png            # Recommended Setting for Probe Basic
+INTRO_TIME = 5                          # Recommended Setting for Probe Basic
+INCREMENTS = JOG .01in .001in .0001in   # REQUIRED Setting for Probe Basic
+GEOMETRY = xyz                          # REQUIRED Setting for Probe Basic
+USER_TABS_PATH = user_tabs/             # REQUIRED Setting for Probe Basic
+USER_BUTTONS_PATH = user_buttons/       # REQUIRED Setting for Probe Basic
+USER_DROS_PATH = user_dro_display/      # REQUIRED Setting for Probe Basic
+DRO_DISPLAY = xyz                       # REQUIRED Setting for Probe Basic, Options: xyz, xyza, xyzab, xyzac, xyzbc, user
+# ATC tab display options, 0 = no atc tab displayed, 1 = Carousel atc display, 2 = rack atc display
+ATC_TAB_DISPLAY = 0
+#USER_ATC_BUTTONS_PATH = user_atc_buttons/
+
+[RS274NGC]
+RS274NGC_STARTUP_CODE = F10 S300 G20 G17 G40 G49 G54 G64 P.001 G80 G90 G91.1 G92.1 G94 G97 G98
+PARAMETER_FILE = linuxcnc.var
+OWORD_NARGS = 1
+NO_DOWNCASE_OWORD = 1
+SUBROUTINE_PATH = subroutines
+
+[HAL]
+HALUI = halui
+POSTGUI_HALFILE = probe_basic_postgui.hal
+TWOPASS = one
+
+[TRAJ]
+AXES = 3 # or number of axes of your machine

python/remap.py

@@ -0,0 +1,19 @@
+#   This is a component of LinuxCNC
+#   Copyright 2011, 2012, 2013, 2014 Dewey Garrett <dgarrett@panix.com>,
+#   Michael Haberler <git@mah.priv.at>, Norbert Schechner <nieson@web.de>
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software
+#   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#
+from stdglue import *

python/stdglue.py

@@ -0,0 +1,165 @@
+
+#NOTE:
+#     The legacy names *selected_pocket* and *current_pocket* actually reference
+#     a sequential tooldata index for tool items loaded from a tool
+#     table ([EMCIO]TOOL_TABLE) or via a tooldata database ([EMCIO]DB_PROGRAM)
+
+# stdglue - canned prolog and epilog functions for the remappable builtin codes (T,M6,M61,S,F)
+#
+# we dont use argspec to avoid the generic error message of the argspec prolog and give more
+# concise ones here
+
+
+import emccanon
+
+from linuxcnc import version
+from interpreter import *
+from emccanon import MESSAGE
+
+throw_exceptions = 1
+
+VERSION = version
+
+# used so screens can get info.
+# add this to toplevel to call it:
+
+# import remap
+# def __init__(self):
+#     if self.task:
+#         remap.build_hal(self)
+
+def build_hal(self):
+    import hal
+    try:
+        h=hal.component('remapStat')
+        h.newpin("tool", hal.HAL_S32, hal.HAL_OUT)
+        h.newpin("wear", hal.HAL_S32, hal.HAL_OUT)
+        h.ready()
+        self.hal_tool_comp = h
+    except Exception as e:
+        print(e)
+
+# REMAP=T   prolog=prepare_prolog ngc=prepare epilog=prepare_epilog
+# exposed parameters: #<tool> #<pocket>
+
+def prepare_prolog(self,**words):
+    try:
+        cblock = self.blocks[self.remap_level]
+        if not cblock.t_flag:
+            self.set_errormsg("T requires a tool number")
+            return INTERP_ERROR
+        tool  = cblock.t_number
+        if tool:
+            (status, pocket) = self.find_tool_pocket(tool)
+            if status != INTERP_OK:
+                self.set_errormsg("T%d: pocket not found" % (tool))
+                return status
+        else:
+            pocket = -1 # this is a T0 - tool unload
+        self.params["tool"] = tool
+        self.params["pocket"] = pocket
+        return INTERP_OK
+    except Exception as e:
+        self.set_errormsg("T%d/prepare_prolog: %s" % (int(words['t']), e))
+        return INTERP_ERROR
+
+def prepare_epilog(self, **words):
+    try:
+        if not self.value_returned:
+            r = self.blocks[self.remap_level].executing_remap
+            self.set_errormsg("the %s remap procedure %s did not return a value"
+                             % (r.name,r.remap_ngc if r.remap_ngc else r.remap_py))
+            return INTERP_ERROR
+        if self.blocks[self.remap_level].builtin_used:
+            #print "---------- T builtin recursion, nothing to do"
+            return INTERP_OK
+        else:
+            if self.return_value > 0:
+                self.selected_tool = int(self.params["tool"])
+                self.selected_pocket = int(self.params["pocket"])
+                emccanon.SELECT_TOOL(self.selected_tool)
+                return INTERP_OK
+            else:
+                self.set_errormsg("T%d: aborted (return code %.1f)" % (int(self.params["tool"]),self.return_value))
+                return INTERP_ERROR
+    except Exception as e:
+        self.set_errormsg("T%d/prepare_epilog: %s" % (tool,e))
+        return INTERP_ERROR
+
+# REMAP=M6  modalgroup=6 prolog=change_prolog ngc=change epilog=change_epilog
+# exposed parameters:
+#    #<tool_in_spindle>
+#    #<selected_tool>
+#    #<current_pocket>
+#    #<selected_pocket>
+
+def change_prolog(self, **words):
+    try:
+        # this is relevant only when using iocontrol-v2.
+        if self.params[5600] > 0.0:
+            if self.params[5601] < 0.0:
+                self.set_errormsg("Toolchanger hard fault %d" % (int(self.params[5601])))
+                return INTERP_ERROR
+            print("change_prolog: Toolchanger soft fault %d" % int(self.params[5601]))
+
+        if self.selected_pocket < 0:
+            self.set_errormsg("M6: no tool prepared")
+            return INTERP_ERROR
+        if self.cutter_comp_side:
+            self.set_errormsg("Cannot change tools with cutter radius compensation on")
+            return INTERP_ERROR
+        self.params["tool_in_spindle"] = self.current_tool
+        self.params["selected_tool"] = self.selected_tool
+        self.params["current_pocket"] = self.current_pocket
+        self.params["selected_pocket"] = self.selected_pocket
+        return INTERP_OK
+    except Exception as e:
+        self.set_errormsg("M6/change_prolog: %s" % (e))
+        return INTERP_ERROR
+
+def change_epilog(self, **words):
+    try:
+        if not self.value_returned:
+            r = self.blocks[self.remap_level].executing_remap
+            self.set_errormsg("the %s remap procedure %s did not return a value"
+                             % (r.name,r.remap_ngc if r.remap_ngc else r.remap_py))
+            yield INTERP_ERROR
+        # this is relevant only when using iocontrol-v2.
+        if self.params[5600] > 0.0:
+            if self.params[5601] < 0.0:
+                self.set_errormsg("Toolchanger hard fault %d" % (int(self.params[5601])))
+                yield INTERP_ERROR
+            print("change_epilog: Toolchanger soft fault %d" % int(self.params[5601]))
+
+        if self.blocks[self.remap_level].builtin_used:
+            #print "---------- M6 builtin recursion, nothing to do"
+            yield INTERP_OK
+        else:
+            if self.return_value > 0.0:
+                
+                # commit change
+                
+                self.selected_pocket =  int(self.params["selected_pocket"])
+                                
+                if "2.9" in VERSION:
+                    emccanon.CHANGE_TOOL(self.selected_pocket)
+                elif "2.10" in VERSION:
+                    emccanon.SELECT_TOOL(self.selected_tool)
+                    emccanon.CHANGE_TOOL()
+
+                self.current_pocket = self.selected_pocket
+                self.selected_pocket = -1
+                self.selected_tool = -1
+                # cause a sync()
+                self.set_tool_parameters()
+                self.toolchange_flag = True
+                yield INTERP_EXECUTE_FINISH
+            else:
+                # yield to print any messages from the NGC program
+                yield INTERP_EXECUTE_FINISH
+                self.set_errormsg("M6 aborted (return code %.1f)" % (self.return_value))
+                yield INTERP_ERROR
+    except Exception as e:
+        self.set_errormsg("M6/change_epilog: %s" % (e))
+        yield INTERP_ERROR
+

python/toplevel.py

@@ -0,0 +1,19 @@
+#   This is a component of LinuxCNC
+#   Copyright 2011, 2013, 2014 Dewey Garrett <dgarrett@panix.com>,
+#   Michael Haberler <git@mah.priv.at>, Norbert Schechner <nieson@web.de>
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software
+#   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+#
+import remap

subroutines/a.ngc

@@ -0,0 +1,10 @@
+o<a> sub
+#<debug_1> = 0
+
+M6
+
+o100 if [#<debug_1> EQ 1]
+    (DEBUG,  testowy napis)
+o<a> endsub [1]
+
+M2

subroutines/aaa.ngc

@@ -0,0 +1,188 @@
+o<aaa> sub
+#<print_debug> = 0
+o10 if [#<print_debug> EQ 1]
+    (DEBUG, from tool_in_spindle=#<tool_in_spindle> to selected_tool=#<selected_tool>)
+o10 endif
+; -------------------------------------
+; --- Begin Initial data gathering ----
+; -------------------------------------
+
+#<fast_probe_fr> = #3004    (set from probe screen fast probe feed rate)
+#<slow_probe_fr> = #3005    (set from probe screen slow probe feedrate)
+#<traverse_fr> = #3006    (set from probe screen traverse probe feedrate)
+#<z_max_travel> = #3007    (max z distance the tool travels before erroring out if not contact is made)
+#<xy_max_travel> = #3008    (max xy distance the tool travels before erroring out if not contact is made)
+#<retract_distance> = #3009    (distance the tool retracts after making contact during fast feed mode)
+#<spindle_zero_height> = #3010    (G53 distance from home to spindle nose triggering point on touch plate)
+#<tool_diameter_probe_mode> = #3011    (activates the tool diameter probe subroutine section)
+#<tool_diameter_offset_mode> = #3012    (activates the tool diameter offset position for probe subroutine section)
+#<tool_setter_offset_direction> = #3013    (sets tool setter offset direction to move tool)
+#<tool_diameter> = #5410    (current tool's diameter used for offseting probe position in x axis)
+
+G92.1    (Cancel G92 offset)
+M50 P0
+
+#<tool_touch_x_coords> = #5181
+#<tool_touch_y_coords> = #5182
+#<tool_touch_z_coords> = #5183
+
+#<tool_change_x_coords> = 10
+#<tool_change_y_coords> = 10
+#<tool_change_z_coords> = -10
+
+
+#<tool_radius_offset> = [#<tool_diameter> / 2]
+#<left_offset_probing_position> = [#<tool_touch_x_coords> - #<tool_radius_offset>]
+#<right_offset_probing_position> = [#<tool_touch_x_coords> + #<tool_radius_offset>]
+#<front_offset_probing_position> = [#<tool_touch_y_coords> - #<tool_radius_offset>]
+#<back_offset_probing_position> = [#<tool_touch_y_coords> + #<tool_radius_offset>]
+
+#<tool> = #<selected_tool>
+#<pocket> = #<selected_pocket>
+#<local_start_x> = #<_x>
+#<local_start_y> = #<_y>
+#<local_start_z> = #<_z>
+
+#<zworkoffset> = [#[5203 + #5220 * 20] + #5213 * #5210]
+;#<offset_z> = #5422         ;Stores the offset of the current Z coordinate.
+
+o100 if [#<tool_diameter_offset_mode> EQ 1]
+    o101 if [#<tool_setter_offset_direction> EQ 0]
+        #<tool_touch_x_coords> = #<left_offset_probing_position>
+    o101 else if [#<tool_setter_offset_direction> EQ 1]
+        #<tool_touch_x_coords> = #<right_offset_probing_position>
+    o101 else if [#<tool_setter_offset_direction> EQ 2]
+        #<tool_touch_y_coords> = #<front_offset_probing_position>
+    o101 else if [#<tool_setter_offset_direction> EQ 3]
+        #<tool_touch_y_coords> = #<back_offset_probing_position>
+    o101 endif
+o100 endif
+
+; -------------------------------------
+; --- End Initial Data Gathering ----
+; -------------------------------------
+
+; -------------------------------------
+; --- Begin Initial Safety Checks ----
+; -------------------------------------
+
+; we must execute this only in the milltask interpreter
+; or preview will break, so test for '#<_task>' which is 1 for 
+; the milltask interpreter and 0 in the UI's
+o110 if [#<_task> EQ 0]
+        (debug, Task is Null)
+o110     return [999]
+o110 endif
+
+; check we are in right mode
+o120 if [#<_metric_machine>]
+    o125 if [#<_imperial>]
+       (MSG, Auto Tool probe error: not in G21 mode )
+    o125 return [-3] ; indicate probe contact failure to epilog
+    o125 endif
+o120 else
+    o125 if [#<_imperial> EQ 0]
+       (MSG, Auto Tool probe error: not in G20 mode )
+    o125 return [-3] ; indicate probe contact failure to epilog
+    o125 endif
+o120 endif
+
+; -------------------------------------
+; --- End Initial Safety Checks ----
+; -------------------------------------
+
+; -------------------------------------
+; --- Begin Physical Tool Change ----
+; -------------------------------------
+
+G90    (set absolute coordinates)
+G53 G0 F[#<traverse_fr>] Z0    (move to z0 home position)
+
+o200 if [#<_current_tool>  NE #<tool>]
+    ; then move to change position
+    G53 G0 F[#<traverse_fr>] X#<tool_change_x_coords> Y#<tool_change_y_coords>
+    G53 G0 F[#<traverse_fr>] Z#<tool_change_z_coords>
+o200 endif
+
+;cancel tool offset mode
+G49
+
+; using the code being remapped here means 'use builtin behaviour'
+;  ie, this is not a recursive call to this program, but calls the 
+;    un-remapped M6 processing 
+;  That processing includes actually sending the window to the user
+;    to press OK when they have completed the tool change.
+M6
+
+; -------------------------------------
+; ------ End Physical Tool Change ----
+; -------------------------------------
+
+; -------------------------------------
+; ------ Begin Safety Checks for Tool Offset Measurement ----
+; -------------------------------------
+
+
+; -------------------------------------
+; ------ Begin Tool Offset Measurement ----
+; -------------------------------------
+
+G90    (set absolute coordinates)
+G53 G1 F[#<traverse_fr>] Z0    (move to z0 home position)
+G53 G1 F[#<traverse_fr>] X#<tool_touch_x_coords> Y#<tool_touch_y_coords>
+G53 G1 F[#<traverse_fr>] Z#<tool_touch_z_coords>
+
+#<offset_z> = #5422         ;Stores the offset of the current Z coordinate.
+
+;switch to relative distance mode for probe moves
+G91
+
+F #<fast_probe_fr>
+G38.2 Z-[#<z_max_travel>]    (fast tool probe)
+#<z_fast_probe> = #5063    (save probe result of fast probe to parameters)
+G1 F[#<traverse_fr>] Z[#<retract_distance>]    (retract tool retract distance amount)
+
+o400 if [#5070 EQ 0]
+    G90
+o400 return [-3] ; indicate probe contact failure to epilog
+o400 endif
+
+(Slow Probe Rule, if Slow Probe FR is set to 0, Slow Probe is Bypassed)
+o410 if [#<slow_probe_fr> GT 0]
+    (Initiate Slow Z- Probe)
+    G91
+    F[#<slow_probe_fr>]    (set probe slow feedrate)
+    G38.2 Z-[#<retract_distance> * 2]    (slow tool probe)
+    #<z_slow_probe> = #5063
+o410 endif
+
+o420 if [#5070 EQ 0]
+    G90
+o420 return [-3] ; indicate probe contact failure to epilog
+o420 endif
+
+(Tool Diameter Probe Mode Section, User must define this section as needed)
+o430 if [#<tool_diameter_probe_mode> EQ 1]
+    (DEBUG, Tool Diameter Probing is Not Defined in Subroutine)
+o430 endif
+
+
+
+G90    (set absolute coordinates)
+G53 G1 F[#<traverse_fr>] Z0 (Send Spindle to home zero position)
+
+(define new tool length offset parameters)
+#<new_tool_length_offset> = [ABS[#<spindle_zero_height> + #5063 - #<offset_z>]]
+
+G10 L1 P #<tool> Z [#<new_tool_length_offset>]
+
+T #<tool> G43  H #<tool>    (enable tool length offset)
+
+M50 P1  (reinstate feedrate override)
+o<print_debug> if [#<print_debug> EQ 1]
+    (DEBUG, new tool lenght offset: #<new_tool_length_offset>)
+    (DEBUG, offset_z: #<offset_z>, spindle zero offset: #<spindle_zero_height>, fast probe: #<z_fast_probe>, slow probe: #<z_slow_probe>)
+o<print_debug> endif
+
+o<aaa> endsub [1]
+M2

subroutines/clamptool.ngc

@@ -0,0 +1,12 @@
+o<clamptool> sub
+
+M65 P2 ; clamp the tool
+
+M66 P5 L3 Q2 ; check the clamped tool sensor
+o100 if [#5399 LT 0]
+    (abort, Failed to release tool) ; abort if the sensor does not activate in 2 seconds
+o100 endif
+
+o<clamptool> endsub [1]
+
+M2

subroutines/extendatc.ngc

@@ -0,0 +1,27 @@
+o<extendatc> sub
+
+; #<atc_z_tool_change_height> is the height you spindle needs to be at to clamp/unclamp a tool form the ATC (Set via INI [ATC]Z_TOOL_CHANGE_HEIGHT)
+; #<atc_z_tool_clearance_height> is the clearance height you spindle needs to be at to safely clear the ATC (Set via INI [ATC]Z_TOOL_CLEARANCE_HEIGHT)
+
+#<atc_z_tool_change_height> = -3.9000
+o100 if [EXISTS[#<_ini[atc]z_tool_change_height>]]
+    #<atc_z_tool_change_height> = #<_ini[atc]z_tool_change_height>
+o100 endif
+#<atc_z_tool_clearance_height> = [#<_ini[AXIS_Z]MAX_LIMIT>-0.01]
+o110 if [EXISTS[#<_ini[atc]z_tool_clearance_height>]]
+    #<atc_z_tool_clearance_height> = #<_ini[atc]z_tool_clearance_height>
+o110 endif
+
+G0 G53 Z#<atc_z_tool_clearance_height> ; move z to clear height
+
+M65 P1 ; Turn off carousel home solenoid
+M64 P0 ; Move Carousel OUT
+M66 P1 L3 Q5 ; check for carousel out position sensor
+o120 if [#5399 LT 0]
+    M65 P0 ; switch off atc out solenoid
+    (abort, ATC not in position)
+o120 endif
+
+o<extendatc> endsub [1]
+
+M2

subroutines/go_to_g30.ngc

@@ -0,0 +1,10 @@
+o<go_to_g30> sub
+
+M73
+G90
+G53 G0 Z0
+G30
+
+o<go_to_g30> endsub
+
+M2

subroutines/go_to_home.ngc

@@ -0,0 +1,20 @@
+o<go_to_home> sub
+
+M73
+G90
+G53 G0 Z0
+G53 G0 X0 Y0
+
+o100 if [EXISTS[#<_ini[traj]axes>]]
+    #<geometry> = #<_ini[traj]axes>
+o100 endif
+
+o110 if [#<geometry> EQ 4]
+    G53 G0 A0
+o110 else if [#<geometry> EQ 5]
+    G53 G0 A0 C0
+o110 endif
+
+o<go_to_home> endsub
+
+M2

subroutines/go_to_zero.ngc

@@ -0,0 +1,20 @@
+o<go_to_zero> sub
+
+M73
+G90
+G53 G0 Z0
+G0 X0 Y0
+
+o100 if [EXISTS[#<_ini[traj]axes>]]
+    #<geometry> = #<_ini[traj]axes>
+o100 endif
+
+o110 if [#<geometry> EQ 4]
+    G0 A0
+o110 else if [#<geometry> EQ 5]
+    G0 A0 C0
+o110 endif
+
+o<go_to_zero> endsub
+
+M2

subroutines/load_spindle_safety.ngc

@@ -0,0 +1,48 @@
+(author: Chris P)
+(version: 0.5)
+(date: 06/27/24)
+
+(load tool in spindle safety macro)
+; This is called form the ATC page
+; Parameter #3991 is used to track the current tool loaded it in the spindle (persistently)
+; Parameters #4001 to #4024 are used to track which tool is in which pocket (persistently)
+; Parameter #4000 is not populated just used in the maths to calculate the above numbers
+; #<number_of_pockets>: The number of pockets the ATC platter has, This is user set in the INI file via #<_ini[atc]pockets>
+
+o<load_spindle_safety> sub
+(PRINT, o<load_spindle_safety>)
+
+#<load_spindle_tool_number> = #1 ; this is the value form the ATC tab
+#<probe_tool_number> = #3014
+
+; default to a 12 pocket ATC (matching DynATC Widget behaviour), then update based on INI settings
+#<number_of_pockets> = 12
+o101 if [EXISTS[#<_ini[atc]pockets>]]
+    #<number_of_pockets> = #<_ini[atc]pockets>
+o101 endif
+
+#10 = 0
+#11 = 0 ; 1 if tool is already stored in carousel
+
+o110 while [#10 LT #<number_of_pockets>]
+    #10 = [#10+1]
+    o120 if [#<load_spindle_tool_number> EQ #[4000 + #10]]
+        (DEBUG, the tool you are trying to load is already stored in carousel pocket %d#10)
+        #11 = 1
+    o120 endif
+o110 endwhile
+
+o130 if [#11 EQ 0]
+    M61 Q#<load_spindle_tool_number> G43 H#<load_spindle_tool_number>
+    #3991 = #<load_spindle_tool_number>
+o130 endif
+
+o140 if [#<load_spindle_tool_number> EQ #<probe_tool_number>]
+    S0 M5
+o140 endif
+
+o<program_coolant> call
+
+o<load_spindle_safety> endsub
+
+M2 (end program)

subroutines/load_spindle_safety_2.ngc

@@ -0,0 +1,48 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(load tool in spindle safety macro)
+; This is called form the Tool page
+; Parameter #3991 is used to track the current tool loaded it in the spindle (persistently)
+; Parameters #4001 to #4024 are used to track which tool is in which pocket (persistently)
+; Parameter #4000 is not populated just used in the maths to calculate the above numbers
+; #<number_of_pockets>: The number of pockets the ATC platter has, This is user set in the INI file via #<_ini[atc]pockets>
+
+o<load_spindle_safety_2> sub
+(PRINT, o<load_spindle_safety_2>)
+
+#<load_spindle_tool_number_2> = #1 ; this is the value form the TOOL tab
+#<probe_tool_number> = #3014
+
+; default to a 12 pocket ATC (matching DynATC Widget behaviour), then update based on INI settings
+#<number_of_pockets> = 12
+o101 if [EXISTS[#<_ini[atc]pockets>]]
+    #<number_of_pockets> = #<_ini[atc]pockets>
+o101 endif
+
+#10 = 0
+#11 = 0 ; 1 if tool is already stored in carousel
+
+o110 while [#10 LT #<number_of_pockets>]
+    #10 = [#10+1]
+    o120 if [#<load_spindle_tool_number_2> EQ #[4000 + #10]]
+        (DEBUG, the tool you are trying to load is already stored in carousel pocket %d#10)
+        #11 = 1
+    o120 endif
+o110 endwhile
+
+o130 if [#11 EQ 0]
+    M61 Q#<load_spindle_tool_number_2> G43 H#<load_spindle_tool_number_2>
+    #3991 = #<load_spindle_tool_number_2>
+o130 endif
+
+o140 if [#<load_spindle_tool_number_2> EQ #<probe_tool_number>]
+    S0 M5
+o140 endif
+
+o<program_coolant> call
+
+o<load_spindle_safety_2> endsub
+
+M2 (end program)

subroutines/m10.ngc

@@ -0,0 +1,39 @@
+o<m10> sub
+
+; Move tool carousel best direction to pocket P
+; Parameter #3989 is used to track if the carousel is homed (M13) (volatile)
+; Parameter #3990 is used to track the current tool pocket (persistently)
+; #<number_of_pockets>: The number of pockets in the ATC is automaticity pulled from the INI via #<_ini[atc]pockets>
+(PRINT, o<m10> P#<p>)
+
+o100 if [#3989 NE 1]
+    M13
+o100 endif
+
+; default to a 12 pocket ATC (matching DynATC Widget behaviour), then update based on INI settings
+#<number_of_pockets> = 12
+o110 if [EXISTS[#<_ini[atc]pockets>]]
+    #<number_of_pockets> = #<_ini[atc]pockets>
+o110 endif
+
+#<steps> = [#3990 - #<p>]
+(PRINT, o<m10> P#<p>, steps=#<steps>)
+o120 if [#<steps> GT [#<number_of_pockets> / 2]]
+    #<steps>=[#<steps> - #<number_of_pockets>]
+o120 endif
+
+o130 if [#<steps> LT -[#<number_of_pockets> / 2]]
+    #<steps>=[#<steps> + #<number_of_pockets>]
+o130 endif
+
+o140 if [#<steps> GT 0]
+    M12 P[#<steps>]
+o140 elseif [#<steps> LT 0]
+    #<steps>=[#<steps> * -1]
+    M11 P[#<steps>]
+o140 endif
+
+(PRINT, o<m10> endsub)
+o<m10> endsub [1]
+
+M2

subroutines/m11.ngc

@@ -0,0 +1,50 @@
+o<m11> sub
+
+; Move tool carousel CW Parameter P number of steps
+; Without parameter one step CW.
+; Parameter #3989 is used to track if the carousel is homed (M13) (volatile)
+; Parameter #3990 is used to track the current tool pocket (persistently)
+; #<number_of_pockets>: The number of pockets in the ATC is automaticity pulled from the INI via #<_ini[atc]pockets>
+(PRINT, o<m11> P#<p>)
+
+o100 if [#3989 NE 1]
+    (PRINT, atc not homed, homing)
+    M13
+o100 endif
+
+; default to a 12 pocket ATC (matching DynATC Widget behaviour), then update based on INI settings
+#<number_of_pockets> = 12
+o110 if [EXISTS[#<_ini[atc]pockets>]]
+    #<number_of_pockets> = #<_ini[atc]pockets>
+o110 endif
+
+o120 if [EXISTS[#<p>]]
+    #<steps_to_move> = #<p>
+o120 else
+    #<steps_to_move> = 1
+    (tells the atc widget move 1 step forward)
+o120 endif
+
+(tells the atc widget how many steps to move and start moving forward)
+(DEBUG, EVAL[vcp.getWidget{"dynatc"}.rotate{#<steps_to_move>, "cw"}])
+
+M64 P4 ; Move atc motor FWD
+
+o130 do
+    M66 P4 L1 Q3 ; wait for rising edge on rotation index
+    o131 if [#5399 LT 0]
+        M65 P4 ; Stop atc motor
+        (abort, Failed to get rotation index)
+    o131 endif
+    #3990 = [[[#3990+2] MOD #<number_of_pockets>]-1] ; Pocket is no.1-#<number_of_pockets>
+    #<steps_to_move> = [#<steps_to_move>-1]
+o130 while [#<steps_to_move> GT 0]
+
+M65 P4 ; Stop motor
+
+#<_my_current_pocket> = #3990
+
+(PRINT, o<m11> endsub)
+o<m11> endsub [1]
+
+M2

subroutines/m12.ngc

@@ -0,0 +1,50 @@
+o<m12> sub
+
+; Move tool carousel CCW Parameter P number of steps
+; Without parameter one step CCW.
+; Parameter #3989 is used to track if the carousel is homed (M13) (volatile)
+; Parameter #3990 is used to track the current tool pocket (persistently)
+; #<number_of_pockets>: The number of pockets in the ATC is automaticity pulled from the INI via #<_ini[atc]pockets>
+(PRINT, o<m12> P#<p>)
+
+o100 if [#3989 NE 1]
+    (PRINT, atc not homed, homing)
+    M13
+o100 endif
+
+; default to a 12 pocket ATC (matching DynATC Widget behaviour), then update based on INI settings
+#<number_of_pockets> = 12
+o110 if [EXISTS[#<_ini[atc]pockets>]]
+    #<number_of_pockets> = #<_ini[atc]pockets>
+o110 endif
+
+o120 if [EXISTS[#<p>]]
+    #<steps_to_move> = #<p>
+o120 else
+    #<steps_to_move>=1
+    (tells the atc widget move 1 step reverse)
+o120 endif
+
+(tells the atc widget how many steps to move and start moving reverse)
+(DEBUG, EVAL[vcp.getWidget{"dynatc"}.rotate{#<steps_to_move>, "ccw"}])
+
+M64 P3 ; Move atc motor REV
+
+o130 do
+    M66 P4 L1 Q3 ; wait for rising edge on rotation index
+    o131 if [#5399 LT 0]
+        M65 P3 ; Stop atc motor
+        (abort, Failed to get rotation index)
+    o131 endif
+    #3990 = [[[#3990-2] MOD #<number_of_pockets>]+1] ; Pocket is no.1-#<number_of_pockets>
+    #<steps_to_move> = [#<steps_to_move>-1]
+o130 while [#<steps_to_move> GT 0]
+
+M65 P3 ; Stop motor
+
+#<_my_current_pocket> = #3990
+
+(PRINT, o<m12> endsub)
+o<m12> endsub [1]
+
+M2

subroutines/m13.ngc

@@ -0,0 +1,42 @@
+o<m13> sub
+
+; Move tool carousel CW until ATC zero
+; Parameter #3989 is used to track if the carousel is homed (M13) (volatile)
+; Parameter #3990 is used to track the current tool pocket (persistently)
+; #<number_of_pockets>: The number of pockets in the ATC is automaticity pulled from the INI via #<_ini[atc]pockets>
+(PRINT, o<m13>)
+
+(DEBUG, EVAL[vcp.getWidget{"dynatc"}.atc_message{"REFERENCING"}])
+
+M64 P4 ; Move Motor FWD
+M66 P4 L1 Q20 ; wait for rising edge on home index
+o100 if [#5399 LT 0]
+    M65 P4 ; stop motor
+    (abort, Failed to home carousel)
+o100 endif
+
+#3990 = 1
+M65 P4 ; Stop motor
+#3989 = 1
+
+(DEBUG, EVAL[vcp.getWidget{"dynatc"}.atc_message{}])
+
+#<number_of_pockets> = 12
+o110 if [EXISTS[#<_ini[atc]pockets>]]
+    #<number_of_pockets> = #<_ini[atc]pockets>
+o110 endif
+
+#1 = 0
+
+o120 while [#1 LT #<number_of_pockets>]
+    #1 = [#1+1]
+    #2 = #[4000+#1]
+    (DEBUG, EVAL[vcp.getWidget{"dynatc"}.store_tool{#1, #2}])
+o120 endwhile
+
+M61 Q#3991 G43 H#3991
+
+(PRINT, o<m13> endsub)
+o<m13> endsub [1]
+
+M2

subroutines/m21.ngc

@@ -0,0 +1,45 @@
+o<m21> sub
+
+; Move Carousel to the tool change position - OUT
+; then unload any tool in the spindle into the current pocket
+; Parameter #3991 is used to track the current tool loaded it in the spindle (persistently)
+; #<atc_z_tool_change_height> is the height you spindle needs to be at to clamp/unclamp a tool form the ATC (Set via INI [ATC]Z_TOOL_CHANGE_HEIGHT)
+; #<atc_z_tool_clearance_height> is the clearance height you spindle needs to be at to safely clear the ATC (Set via INI [ATC]Z_TOOL_CLEARANCE_HEIGHT)
+(PRINT, o<m21>)
+
+#<atc_z_tool_change_height> = -3.9000
+o100 if [EXISTS[#<_ini[atc]z_tool_change_height>]]
+    #<atc_z_tool_change_height> = #<_ini[atc]z_tool_change_height>
+o100 endif
+#<atc_z_tool_clearance_height> = [#<_ini[AXIS_Z]MAX_LIMIT>-0.01]
+o110 if [EXISTS[#<_ini[atc]z_tool_clearance_height>]]
+    #<atc_z_tool_clearance_height> = #<_ini[atc]z_tool_clearance_height>
+o110 endif
+
+M65 P1 ; switch off carousel in solenoid
+M66 P1 L3 Q1
+
+M5 M9
+G90
+G0 G53 Z#<atc_z_tool_change_height> ; rapid move to above the tool change height
+
+;M19 R0 Q3 ; orient spindle
+
+M64 P0 ; Move Carousel out
+M66 P1 L3 Q5 ; check for carousel out sensor
+o120 if [#5399 LT 0]
+    M65 P0 ; switch off atc out solenoid
+    (abort, ATC not in position)
+o120 endif
+
+M24 ; activate drawbar, release the tool
+M5 ; turn off spindle lock
+
+G0 G53 Z#<atc_z_tool_clearance_height> ; move z to clear height
+
+#3991 = 0; save fact there is now no tool in the spindle
+
+(PRINT, o<m21> endsub)
+o<m21> endsub [1]
+
+M2

subroutines/m22.ngc

@@ -0,0 +1,42 @@
+o<m22> sub
+
+; Move Carousel to the home position - IN
+; after loading any tool in the current pocket to the spindle
+; #<atc_z_tool_change_height> is the height you spindle needs to be at to clamp/unclamp a tool form the ATC (Set via INI [ATC]Z_TOOL_CHANGE_HEIGHT)
+; #<atc_z_tool_clearance_height> is the clearance height you spindle needs to be at to safely clear the ATC (Set via INI [ATC]Z_TOOL_CLEARANCE_HEIGHT)
+(PRINT, o<m22>)
+
+#<atc_z_tool_change_height> = -3.9000
+o100 if [EXISTS[#<_ini[atc]z_tool_change_height>]]
+    #<atc_z_tool_change_height> = #<_ini[atc]z_tool_change_height>
+o100 endif
+#<atc_z_tool_clearance_height> = [#<_ini[AXIS_Z]MAX_LIMIT>-0.01]
+o110 if [EXISTS[#<_ini[atc]z_tool_clearance_height>]]
+    #<atc_z_tool_clearance_height> = #<_ini[atc]z_tool_clearance_height>
+o110 endif
+
+;M19 R0 Q2
+M24
+;M19 R0 Q1
+;G90
+G0 G53 Z#<atc_z_tool_change_height> ; rapid move to above the tool change height
+M65 P2 ; release the drawbar to clamp the tool
+M5
+M66 P5 L3 Q1 ; check the tool clamped sensor
+o120 if [#5399 LT 0]
+    (abort, Failed to reclamp tool)
+o120 endif
+
+M65 P0 ; Move Carousel home
+M66 P0 L3 Q4 ; check carousel in position sensor
+o130 if [#5399 LT 0]
+    M65 P1 ; turn off the solenoid to send atc home
+    (abort, Failed to send carousel home) ; abort if the sensor does not activate in 5 seconds
+o130 endif
+
+;M65 P1 ; Turn off carousel home position solenoid
+
+(PRINT, o<m22> endsub)
+o<m22> endsub [1]
+
+M2

subroutines/m24.ngc

@@ -0,0 +1,14 @@
+o<m24> sub
+(PRINT, o<m24>)
+
+M64 P2 ; unclamp the tool
+M66 P2 L3 Q2 ; check the unclamped tool sensor
+o100 if [#5399 LT 0]
+    M65 P2 ; turn off the drawbar
+    (abort, failed to release tool) ; abort if the sensor does not activate in 3 seconds
+o100 endif
+
+(PRINT, o<m24> endsub)
+o<m24> endsub [1]
+
+M2

subroutines/m25.ngc

@@ -0,0 +1,15 @@
+o<m25> sub
+(PRINT, o<m25>)
+
+M64 P0 ; Move Carousel out
+
+M66 P1 L3 Q5 ; check for carousel out sensor
+o100 if [#5399 LT 0]
+    M65 P0 ; switch off atc out solenoid
+    (abort, ATC not in position)
+o100 endif
+
+(PRINT, o<m25> endsub)
+o<m25> endsub [1]
+
+M2

subroutines/m6_tool_call_atc_page.ngc

@@ -0,0 +1,25 @@
+(author: Chris P)
+(version: 0.3)
+(date: 06/27/24)
+
+(m6 tool call with g43 offset applied)
+
+o<m6_tool_call_atc_page> sub
+
+#<tool_number_entry_atc_page> = #1
+#<probe_tool_number> = #3014
+
+T#<tool_number_entry_atc_page> M6
+o100 if [1 EQ 1]
+    G43 H#<tool_number_entry_atc_page>
+o100 endif
+
+o110 if [#<tool_number_entry_atc_page> EQ #<probe_tool_number>]
+  S0 M5
+o110 endif
+
+o<program_coolant> call
+
+o<m6_tool_call_atc_page> endsub
+
+M2 (end program)

subroutines/m6_tool_call_main_panel.ngc

@@ -0,0 +1,26 @@
+(author: Chris P)
+(version: 0.4)
+(date: 06/27/24)
+
+(m6 tool call with g43 offset applied)
+
+o<m6_tool_call_main_panel> sub
+
+#<tool_number_entry_main_panel> = #1
+#<probe_tool_number> = #3014
+
+T#<tool_number_entry_main_panel> M6
+
+o100 if [1 EQ 1]
+    G43 H#<tool_number_entry_main_panel>
+o100 endif
+
+o110 if [#<tool_number_entry_main_panel> EQ #<probe_tool_number>]
+  S0 M5
+o110 endif
+
+o<program_coolant> call
+
+o<m6_tool_call_main_panel> endsub
+
+M2 (end program)

subroutines/m6_tool_call_tool_page.ngc

@@ -0,0 +1,26 @@
+(author: Chris P)
+(version: 0.4)
+(date: 06/27/24)
+
+(m6 tool call with g43 offset applied)
+
+o<m6_tool_call_tool_page> sub
+
+#<tool_number_entry_tool_page> = #1
+#<probe_tool_number> = #3014
+
+T#<tool_number_entry_tool_page> M6
+
+o100 if [1 EQ 1]
+    G43 H#<tool_number_entry_tool_page>
+o100 endif
+
+o110 if [#<tool_number_entry_tool_page> EQ #<probe_tool_number>]
+  S0 M5
+o110 endif
+
+o<program_coolant> call
+
+o<m6_tool_call_tool_page> endsub
+
+M2 (end program)

subroutines/move_head_above_carousel.ngc

@@ -0,0 +1,19 @@
+o<move_head_above_carousel> sub
+
+; #<atc_z_tool_change_height> is the height you spindle needs to be at to clamp/unclamp a tool form the ATC (Set via INI [ATC]Z_TOOL_CHANGE_HEIGHT)
+; #<atc_z_tool_clearance_height> is the clearance height you spindle needs to be at to safely clear the ATC (Set via INI [ATC]Z_TOOL_CLEARANCE_HEIGHT)
+
+#<atc_z_tool_change_height> = -3.9000
+o100 if [EXISTS[#<_ini[atc]z_tool_change_height>]]
+    #<atc_z_tool_change_height> = #<_ini[atc]z_tool_change_height>
+o100 endif
+#<atc_z_tool_clearance_height> = [#<_ini[AXIS_Z]MAX_LIMIT>-0.01]
+o110 if [EXISTS[#<_ini[atc]z_tool_clearance_height>]]
+    #<atc_z_tool_clearance_height> = #<_ini[atc]z_tool_clearance_height>
+o110 endif
+
+G0 G53 Z#<atc_z_tool_clearance_height> ; move z to clear height
+
+o<move_head_above_carousel> endsub [1]
+
+M2

subroutines/move_tool_to_carousel_height.ngc

@@ -0,0 +1,18 @@
+o<move_tool_to_carousel_height> sub
+; #<atc_z_tool_change_height> is the height you spindle needs to be at to clamp/unclamp a tool form the ATC (Set via INI [ATC]Z_TOOL_CHANGE_HEIGHT)
+; #<atc_z_tool_clearance_height> is the clearance height you spindle needs to be at to safely clear the ATC (Set via INI [ATC]Z_TOOL_CLEARANCE_HEIGHT)
+
+#<atc_z_tool_change_height> = -3.9000
+o100 if [EXISTS[#<_ini[atc]z_tool_change_height>]]
+    #<atc_z_tool_change_height> = #<_ini[atc]z_tool_change_height>
+o100 endif
+#<atc_z_tool_clearance_height> = [#<_ini[AXIS_Z]MAX_LIMIT>-0.01]
+o110 if [EXISTS[#<_ini[atc]z_tool_clearance_height>]]
+    #<atc_z_tool_clearance_height> = #<_ini[atc]z_tool_clearance_height>
+o110 endif
+
+G0 G53 Z#<atc_z_tool_change_height> ; rapid move to above the tool change height
+
+o<move_tool_to_carousel_height> endsub [1]
+
+M2

subroutines/on_abort.ngc

@@ -0,0 +1,9 @@
+%
+o<on_abort> sub
+
+G90
+G40
+G49
+
+o<on_abort> endsub
+%

subroutines/orientspindle.ngc

@@ -0,0 +1,11 @@
+o<orientspindle> sub
+; Orient the spindle with platter
+(PRINT, o<orientspindle>)
+
+M5 M9 ; stop all spindle motion and coolant
+M19 R0 Q4 ; orient spindle
+M5 ; turn off spindle lock
+
+o<orientspindle> endsub [1]
+
+M2

subroutines/probe_back_left_inside_corner.ngc

@@ -0,0 +1,122 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe back left inside corner for x,y,z 0,0,0 position)
+(Start probe position is over back left inside corner of stock)
+(inside the step off width square and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_back_left_inside_corner> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+    (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+    M50 P1
+   o<probe_back_left_inside_corner> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Traverse Workpiece Top at Z Clearance Height plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>] Y-[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  G90
+  (Current X Position including offsets in current program units)
+  #<x_start> = #5420
+
+  (Call sub "probe_x_minus_sub" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+    (DEBUG, Missing X Sub returned edge parameter, aborting)
+    M50 P1
+    o<probe_back_left_inside_corner> return
+  o110 endif
+
+  (move to X start Position)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_start>]
+
+  (Current Y Position including offsets in current program units)
+  #<y_start> = #5421
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+    (DEBUG, Missing Y Sub returned edge parameter, aborting)
+    M50 P1
+    o<probe_back_left_inside_corner> return
+  o120 endif
+
+  (move to Y start Position)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_start>]
+
+  (Probe Completion Move to Z Clearance Plane, and X Zero, Y Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_minus_zero_edge>] Y[#<y_plus_zero_edge>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+    (Record Zero in selected axes and WCO)
+    G10 L2 P#5220 X[#<x_minus_zero_edge> + #<workspace_x>]
+    G10 L2 P#5220 Y[#<y_plus_zero_edge> + #<workspace_y>]
+  o130 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_back_left_inside_corner> endsub
+
+M2 (end program)

subroutines/probe_back_left_top_corner.ngc

@@ -0,0 +1,118 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe back left top corner for x,y,z 0,0,0 position)
+(Start probe position is over back left corner of stock)
+(inside the step off width square and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_back_left_top_corner> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_back_left_top_corner> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X-[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_plus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_back_left_top_corner> return
+  o110 endif
+
+  (Probe Y Positioning Move, up to Z clearance plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Probe Y Positioning Move, Traverse Workpiece at Z Clearance plane)
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>] Y[#<step_off_width>]
+
+  (Probe Y Positioning Move,to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_minus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_back_left_top_corner> return
+  o120 endif
+
+  (Probe Completion Move to Z Clearance Plane, and XY Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_plus_zero_edge>] Y[#<y_minus_zero_edge>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_plus_zero_edge> + #<workspace_x>]
+      G10 L2 P#5220 Y[#<y_minus_zero_edge> + #<workspace_y>]
+  o130 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_back_left_top_corner> endsub
+
+M2 (end program)

subroutines/probe_back_right_inside_corner.ngc

@@ -0,0 +1,122 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe back right inside corner for x,y,z 0,0,0 position)
+(Start probe position is over back right inside corner of stock)
+(inside the step off width square and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_back_right_inside_corner> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_back_right_inside_corner> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width X and Y)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X-[#<step_off_width>] Y-[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  G90
+  (Current X Position including offsets in current program units)
+  #<x_start> = #5420
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_plus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_back_right_inside_corner> return
+  o110 endif
+
+  (move to X start Position)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_start>]
+
+  (Current Y Position including offsets in current program units)
+  #<y_start> = #5421
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_back_right_inside_corner> return
+  o120 endif
+
+  (move to Y start Position)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_start>]
+
+  (Probe Completion Move to Z Clearance Plane, and X Zero, Y Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_plus_zero_edge>] Y[#<y_plus_zero_edge>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_plus_zero_edge> + #<workspace_x>]
+      G10 L2 P#5220 Y[#<y_plus_zero_edge> + #<workspace_y>]
+  o130 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_back_right_inside_corner> endsub
+
+M2 (end program)

subroutines/probe_back_right_top_corner.ngc

@@ -0,0 +1,117 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe back right top corner for x,y,z 0,0,0 position)
+(Start probe position is over back right corner of stock)
+(inside the step off width square and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_back_right_top_corner> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_back_right_top_corner> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_back_right_top_corner> return
+  o110 endif
+
+  (Probe Y Positioning Move, up to Z clearance plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  (Probe Y Positioning Move)
+  F[#<probe_traverse_fr>]
+  G38.3 X-[#<step_off_width>] Y[#<step_off_width>]
+
+  (Probe Y Positioning Move,to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_minus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_back_right_top_corner> return
+  o120 endif
+
+  (Probe Completion Move to Z Clearance Plane, and XY Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_minus_zero_edge>] Y[#<y_minus_zero_edge>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_minus_zero_edge> + #<workspace_x>]
+      G10 L2 P#5220 Y[#<y_minus_zero_edge> + #<workspace_y>]
+  o130 endif
+  
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_back_right_top_corner> endsub
+
+M2 (end program)

subroutines/probe_back_top_side.ngc

@@ -0,0 +1,91 @@
+(author: Chris P)
+(version: 0.4)
+(date: 06/27/24)
+
+(Probe back top side for y,z 0,0 position)
+(Start probe position is over back edge of stock)
+(inside the step off width distance and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<Probe_back_top_side> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<Probe_back_top_side> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe Y Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<step_off_width>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_minus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_back_top_side> return
+  o110 endif
+
+  (Probe Completion Move to Z Clearance Plane, and Y Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_minus_zero_edge>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o120 if [#<probe_mode> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 Y[#<y_minus_zero_edge> + #<workspace_y>]
+  o120 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<Probe_back_top_side> endsub
+
+M2 (end program)

subroutines/probe_cal_reset.ngc

@@ -0,0 +1,8 @@
+o<probe_cal_reset> sub
+
+  #3032 = 0
+  (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+
+o<probe_cal_reset> endsub
+
+M2 (end program)

subroutines/probe_cal_round_boss.ngc

@@ -0,0 +1,329 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe calibration offset using defined diam round boss)
+(Start probe position is over center of stock in X and Y axis)
+(within max z distance, ensure all settings have been)
+(set properly according to help diagrams)
+
+o<probe_cal_round_boss> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<cal_diameter> = #3033         (=0)
+  #<sq_cal_axis> = #3036          (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+  #<workspace_z> = #[5203 + [20 * #5220]]
+  
+  (clear current probe calibration offset)
+  #3032 = 0
+  (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_cal_round_boss> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probe Radius)
+  #<probe_radius> = [#<probe_diameter> / 2]
+
+  (Probe Centerline Offset)
+  #<probe_center_offset> = [#<probe_radius>]
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter>]
+
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030][#3032]
+
+  (Probe X Positioning Move, X hint/2 + Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X-[#<cal_diameter>/2 + #<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (first side Probe Completion Move to Z Clearance Plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Positioning move in X, X Hint + Step Off Width at Rapid Speed)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<cal_diameter> + #<step_off_width> + #<xy_clearance>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (probed center calulation)
+  #<x_center_probed> = [[#<x_minus_probed> + #<x_plus_probed>] / 2]
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Probe Y Positioning Move, Y hint/2 + Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y-[#<cal_diameter>/2 + #<step_off_width>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (first side Probe Completion Move to Z Clearance Plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Positioning move in Y, Y Hint + Step Off Width at Rapid Speed)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<cal_diameter> + #<step_off_width> + #<xy_clearance>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calulation)
+  #<y_center_probed> = [[#<y_minus_probed> + #<y_plus_probed>] / 2]
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  (Move to z clearance plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Move to Y Center)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_center_probed>]
+
+  (Probe X Positioning Move, X hint/2 + Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X-[#<cal_diameter>/2 + #<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (first side Probe Completion Move to Z Clearance Plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Positioning move in X, X Hint + Step Off Width at Rapid Speed)
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<cal_diameter> + #<step_off_width> + #<xy_clearance>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (probed center calulation)
+  #<x_center_probed> = [[#<x_minus_probed> + #<x_plus_probed>] / 2]
+
+  (calculate X Width Probed)
+  o110 if [#<x_minus_probed> GT #<x_plus_probed>]
+    #<x_raw_width> = [#<x_minus_probed> - #<x_plus_probed>]
+  o110 else
+      #<x_raw_width> = [#<x_plus_probed> - #<x_minus_probed>]
+  o110 endif
+
+  (Completed probed width calculations)
+  #<x_probed_width> = [#<x_raw_width> - #<probe_diameter_offset>]
+
+  #1001 = #<x_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"x_probed_width"}.setValue{#1001}])
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Probe Y Positioning Move, Y hint/2 + Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y-[#<cal_diameter>/2 + #<step_off_width>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (first side Probe Completion Move to Z Clearance Plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Positioning move in Y, Y Hint + Step Off Width at Rapid Speed)
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<cal_diameter> + #<step_off_width> + #<xy_clearance>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_traverse_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calulation)
+  #<y_center_probed> = [[#<y_minus_probed> + #<y_plus_probed>] / 2]
+
+  (calculate Y Width Probed)
+  o120 if [#<y_minus_probed> GT #<y_plus_probed>]
+      #<y_raw_width> = [#<y_minus_probed> - #<y_plus_probed>]
+  o120 else
+      #<y_raw_width> = [#<y_plus_probed> - #<y_minus_probed>]
+      o<probe_round_boss> return
+  o120 endif
+
+  (Completed probed width calculations)
+  #<y_probed_width> = [#<y_raw_width> - #<probe_diameter_offset>]
+
+  #1003 = #<y_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"y_probed_width"}.setValue{#1003}])
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  #<averaged_diam> = [[#<x_probed_width> + #<y_probed_width>] / 2]
+
+  #1010 = #<averaged_diam>
+  (DEBUG, EVAL[vcp.getWidget{"averaged_diam"}.setValue{#1010}])
+
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>] Y[#<y_center_probed>]
+
+  o130 if [#<cal_diameter> GT #<x_probed_width>]
+      (calculate calibration error and adjust calibration offset)
+      #<x_cal_error> = [[#<cal_diameter> - #<x_probed_width>] / 2]
+      #<new_x_cal_offset> = [#<x_cal_error>]
+  o130 else
+      #<x_cal_error> = [[#<x_probed_width> - #<cal_diameter>] / 2]
+      #<new_x_cal_offset> = [#<x_cal_error>]
+  o130 endif
+
+  o140 if [#<cal_diameter> GT #<y_probed_width>]
+      (calculate calibration error and adjust calibration offset)
+      #<y_cal_error> = [[#<cal_diameter> - #<y_probed_width>] / 2]
+      #<new_y_cal_offset> = [#<y_cal_error>]
+  o140 else
+      #<y_cal_error> = [[#<y_probed_width> - #<cal_diameter>] / 2]
+      #<new_y_cal_offset> = [#<y_cal_error>]
+  o140 endif
+
+  #<new_avg_cal_offset> = [[#<new_x_cal_offset> + #<new_y_cal_offset>] / 2]
+
+  o150 if [#<sq_cal_axis> EQ 0]
+      #3032 = [ABS[#<new_avg_cal_offset>]]
+      (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+  o150 else if [#<sq_cal_axis> EQ 1]
+      #3032 = [ABS[#<new_x_cal_offset>]]
+      (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+  o150 else
+      #3032 = [ABS[#<new_y_cal_offset>]]
+      (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+  o150 endif
+
+  #<x_zero> = [#<x_center_probed> + #<workspace_x>]
+
+  #<y_zero> = [#<y_center_probed> + #<workspace_y>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o160 if [#<probe_mode> EQ 0]
+      (Record XY Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_zero>] Y[#<y_zero>]
+  o160 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_cal_round_boss> endsub
+
+M2 (end program)

subroutines/probe_cal_round_pocket.ngc

@@ -0,0 +1,223 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe calibration offset using defined diam round pocket)
+(Start probe position is over left side edge of pocket wall)
+(inside the step off width distance and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_cal_round_pocket> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<cal_diameter> = #3033         (=0)
+  #<sq_cal_axis> = #3036          (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (clear current probe calibration offset)
+  #3032 = 0
+  (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+       o<probe_cal_round_pocket> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter>]
+
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030][#3032]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x-)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (Call sub "probe_x_plus" to Probe x+)
+  o<probe_x_plus> call [#3014][#3015][#3016][3017][#3018 + #3033][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (probed center calculation)
+  #<x_center_probed> = [[#<x_plus_probed> + #<x_minus_probed>] / 2]
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  (Probe Completion Move to Z Clearance Plane, and X Zero)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Call sub "probe_y_plus" to Probe Y+)
+  o<probe_y_plus> call [#3014][#3015][#3016][3017][#3018 + #3033 / 2][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (Call sub "probe_y_minus" to Probe Y-)
+  o<probe_y_minus> call [#3014][#3015][#3016][3017][#3018 + #3033][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calculation)
+  #<y_center_probed> = [[#<y_plus_probed> + #<y_minus_probed>] / 2]
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  (Probe Completion Move to Z Clearance Plane, Y Zero)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_center_probed>]
+
+  (Call sub "probe_x_minus" to Probe x-)
+  o<probe_x_minus> call [#3014][#3015][#3016][3017][#3018 + #3033 / 2][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (Call sub "probe_x_plus" to Probe x+)
+  o<probe_x_plus> call [#3014][#3015][#3016][3017][#3018 + #3033][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (probed center calculation)
+  #<x_center_probed> = [[#<x_plus_probed> + #<x_minus_probed>] / 2]
+
+  (calculate X Width Probed)
+  #<raw_width> = [#<x_plus_probed> - #<x_minus_probed>]
+
+  (Completed probed width calculations)
+  #<x_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1001 = #<x_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"x_probed_width"}.setValue{#1001}])
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Call sub "probe_y_plus" to Probe Y+)
+  o<probe_y_plus> call [#3014][#3015][#3016][3017][#3018 + #3033 / 2][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (Call sub "probe_y_minus" to Probe Y-)
+  o<probe_y_minus> call [#3014][#3015][#3016][3017][#3018 + #3033][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calculation)
+  #<y_center_probed> = [[#<y_plus_probed> + #<y_minus_probed>] / 2]
+
+  (calculate Y Width Probed)
+  #<raw_width> = [#<y_plus_probed> - #<y_minus_probed>]
+
+  (Completed probed diameter calculations)
+  #<y_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1003 = #<y_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"y_probed_width"}.setValue{#1003}])
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  #<averaged_diam> = [[#<x_probed_width> + #<y_probed_width>] / 2]
+
+  #1010 = #<averaged_diam>
+  (DEBUG, EVAL[vcp.getWidget{"averaged_diam"}.setValue{#1010}])
+
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_center_probed>]
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  o110 if [#<cal_diameter> GT #<x_probed_width>]
+      (calculate calibration error and adjust calibration offset)
+      #<x_cal_error> = [[#<cal_diameter> - #<x_probed_width>] / 2]
+      #<new_x_cal_offset> = [#<x_cal_error>]
+  o110 else
+      #<x_cal_error> = [[#<x_probed_width> - #<cal_diameter>] / 2]
+      #<new_x_cal_offset> = [#<x_cal_error>]
+  o110 endif
+
+  o120 if [#<cal_diameter> GT #<y_probed_width>]
+      (calculate calibration error and adjust calibration offset)
+      #<y_cal_error> = [[#<cal_diameter> - #<y_probed_width>] / 2]
+      #<new_y_cal_offset> = [#<y_cal_error>]
+  o120 else
+      #<y_cal_error> = [[#<y_probed_width> - #<cal_diameter>] / 2]
+      #<new_y_cal_offset> = [#<y_cal_error>]
+  o120 endif
+
+  #<new_avg_cal_offset> = [[#<new_x_cal_offset> + #<new_y_cal_offset>] / 2]
+
+  o130 if [#<sq_cal_axis> EQ 0]
+      #3032 = [ABS[#<new_avg_cal_offset>]]
+      (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+  o130 else if [#<sq_cal_axis> EQ 1]
+      #3032 = [ABS[#<new_x_cal_offset>]]
+      (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+  o130 else
+      #3032 = [ABS[#<new_y_cal_offset>]]
+      (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+  o130 endif
+
+  #<x_zero> = [#<x_center_probed> + #<workspace_x>]
+
+  #<y_zero> = [#<y_center_probed> + #<workspace_y>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o140 if [#<probe_mode> EQ 0]
+      (Record Y Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_zero>] Y[#<y_zero>]
+      (Probe Completion Move to Z Clearance Plane, and X Zero, Y Zero)
+  o140 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_cal_round_pocket> endsub
+
+M2 (end program)

subroutines/probe_cal_square_boss.ngc

@@ -0,0 +1,224 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe calibration offset using defined width square boss)
+(Start probe position is over center of stock in X and Y axis)
+(within max z distance, ensure all settings have been)
+(set properly according to help diagrams)
+
+o<probe_cal_square_boss> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<x_cal_width> = #3034          (=0)
+  #<y_cal_width> = #3035          (=0)
+  #<sq_cal_axis> = #3036          (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+  #<workspace_z> = #[5203 + [20 * #5220]]
+
+  (clear current probe calibration offset)
+  #3032 = 0
+  (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_cal_square_boss> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probe Radius)
+  #<probe_radius> = [#<probe_diameter> / 2]
+
+  (Probe Centerline Offset)
+  #<probe_center_offset> = [#<probe_radius>]
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter>]
+
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030][#3032]
+
+  (Probe X Positioning Move, X hint/2 + Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X-[#<x_cal_width>/2 + #<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (first side Probe Completion Move to Z Clearance Plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Positioning move in X, X Hint + Step Off Width at Traverse Speed)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_cal_width> + #<step_off_width> + #<xy_clearance>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (probed center calulation)
+  #<x_center_probed> = [[#<x_minus_probed> + #<x_plus_probed>] / 2]
+
+  (calculate X Width Probed)
+  #<raw_width> = [#<x_minus_probed> - #<x_plus_probed>]
+
+  (Completed probed width calculations)
+  #<x_probed_width> = [#<raw_width> - #<probe_diameter_offset>]
+
+  #1001 = #<x_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"x_probed_width"}.setValue{#1001}])
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Probe Y Positioning Move, Y hint/2 + Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y-[#<y_cal_width>/2 + #<step_off_width>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (first side Probe Completion Move to Z Clearance Plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Positioning move in Y, Y Hint + Step Off Width at traverse Speed)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_cal_width> + #<step_off_width> + #<xy_clearance>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calulation)
+  #<y_center_probed> = [[#<y_minus_probed> + #<y_plus_probed>] / 2]
+
+  (calculate Y Width Probed)
+  #<raw_width> = [#<y_minus_probed> - #<y_plus_probed>]
+
+  (Completed probed width calculations)
+  #<y_probed_width> = [#<raw_width> - #<probe_diameter_offset>]
+
+  #1003 = #<y_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"y_probed_width"}.setValue{#1003}])
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>] Y[#<y_center_probed>]
+
+  o110 if [#<x_cal_width> GT #<x_probed_width>]
+      (calculate calibration error and adjust calibration offset)
+      #<x_cal_error> = [[#<x_cal_width> - #<x_probed_width>] / 2]
+      #<new_x_cal_offset> = [#<x_cal_error>]
+  o110 else
+      #<x_cal_error> = [[#<x_probed_width> - #<x_cal_width>] / 2]
+      #<new_x_cal_offset> = [#<x_cal_error>]
+  o110 endif
+
+  o120 if [#<y_cal_width> GT #<y_probed_width>]
+      (calculate calibration error and adjust calibration offset)
+      #<y_cal_error> = [[#<y_cal_width> - #<y_probed_width>] / 2]
+      #<new_y_cal_offset> = [#<y_cal_error>]
+  o120 else
+      #<y_cal_error> = [[#<y_probed_width> - #<y_cal_width>] / 2]
+      #<new_y_cal_offset> = [#<y_cal_error>]
+  o120 endif
+
+  #<new_avg_cal_offset> = [[#<new_x_cal_offset> + #<new_y_cal_offset>] / 2]
+
+  o130 if [#<sq_cal_axis> EQ 0]
+      #3032 = [ABS[#<new_avg_cal_offset>]]
+      (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+  o130 else if [#<sq_cal_axis> EQ 1]
+      #3032 = [ABS[#<new_x_cal_offset>]]
+      (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+  o130 else
+      #3032 = [ABS[#<new_y_cal_offset>]]
+      (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+  o130 endif
+
+  #<x_zero> = [#<x_center_probed> + #<workspace_x>]
+
+  #<y_zero> = [#<y_center_probed> + #<workspace_y>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o140 if [#<probe_mode> EQ 0]
+      (Record XY Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_zero>] Y[#<y_zero>]
+      (Probe Completion Move to Z Clearance Plane, and X Zero, Y Zero)
+  o140 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_cal_square_boss> endsub
+
+M2 (end program)

subroutines/probe_cal_square_pocket.ngc

@@ -0,0 +1,178 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe calibration offset using defined width square pocket)
+(Start probe position is over left side edge of pocket wall)
+(inside the step off width distance and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_cal_square_pocket> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<x_cal_width> = #3034          (=0)
+  #<y_cal_width> = #3035          (=0)
+  #<sq_cal_axis> = #3036          (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (clear current probe calibration offset)
+  #3032 = 0
+  (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_cal_square_pocket> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter>]
+
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030][#3032]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][3017][#3018 + #3034][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (probed center calculation)
+  #<x_center_probed> = [[#<x_plus_probed> + #<x_minus_probed>] / 2]
+
+  (calculate X Width Probed)
+  #<raw_width> = [#<x_plus_probed> - #<x_minus_probed>]
+
+  (Completed probed width calculations)
+  #<x_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1001 = #<x_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"x_probed_width"}.setValue{#1001}])
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  (Probe Completion Move to Z Clearance Plane, and X Zero, Y Zero)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Call sub "probe_y_plus" to Probe Y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][3017][#3018 + #3035 / 2][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (Call sub "probe_y_minus" to Probe Y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][3017][#3018 + #3035][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calculation)
+  #<y_center_probed> = [[#<y_plus_probed> + #<y_minus_probed>] / 2]
+
+  (calculate Y Width Probed)
+  #<raw_width> = [#<y_plus_probed> - #<y_minus_probed>]
+
+  (Completed probed width calculations)
+  #<y_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1003 = #<y_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"y_probed_width"}.setValue{#1003}])
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_center_probed>]
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  o110 if [#<x_cal_width> GT #<x_probed_width>]
+      (calculate calibration error and adjust calibration offset)
+      #<x_cal_error> = [[#<x_cal_width> - #<x_probed_width>] / 2]
+      #<new_x_cal_offset> = [#<x_cal_error>]
+  o110 else
+      #<x_cal_error> = [[#<x_probed_width> - #<x_cal_width>] / 2]
+      #<new_x_cal_offset> = [#<x_cal_error>]
+  o110 endif
+
+  o120 if [#<y_cal_width> GT #<y_probed_width>]
+      (calculate calibration error and adjust calibration offset)
+      #<y_cal_error> = [[#<y_cal_width> - #<y_probed_width>] / 2]
+      #<new_y_cal_offset> = [#<y_cal_error>]
+  o120 else
+      #<y_cal_error> = [[#<y_probed_width> - #<y_cal_width>] / 2]
+      #<new_y_cal_offset> = [#<y_cal_error>]
+  o120 endif
+
+  #<new_avg_cal_offset> = [[#<new_x_cal_offset> + #<new_y_cal_offset>] / 2]
+
+  o130 if [#<sq_cal_axis> EQ 0]
+      #3032 = [ABS[#<new_avg_cal_offset>]]
+      (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+  o130 else if [#<sq_cal_axis> EQ 1]
+      #3032 = [ABS[#<new_x_cal_offset>]]
+      (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+  o130 else
+      #3032 = [ABS[#<new_y_cal_offset>]]
+      (DEBUG, EVAL[vcp.getWidget{"calibration_offset_3032"}.setValue{#3032}])
+  o130 endif
+
+  #<x_zero> = [#<x_center_probed> + #<workspace_x>]
+
+  #<y_zero> = [#<y_center_probed> + #<workspace_y>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o140 if [#<probe_mode> EQ 0]
+      (Record X Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_zero>] Y[#<y_zero>]
+  o140 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_cal_square_pocket> endsub
+
+M2 (end program)

subroutines/probe_corner_x_minus_edge_angle.ngc

@@ -0,0 +1,173 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe Corner X minus Edge Angle for x,y,z 0,0,0 position)
+(Start probe position is over front right corner of stock)
+(inside the step off width square and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_corner_x_minus_edge_angle> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<wco_rotation> = #3031         (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+  
+  (set rotation offset to zero for new probe cycle)
+  G10 L2 P[#5220] R0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_corner_x_minus_edge_angle> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  #<z1x> = #5420
+
+  #<z1y> = #5421
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 y-[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  #<p1x> = #5420
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<p1y> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_corner_x_minus_edge_angle> return
+  o110 endif
+
+  (Probe Y Positioning Move, up to Z clearance plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Probe Y Positioning Move, Traverse Workpiece at Z Clearance plane)
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>] Y[#<step_off_width>]
+
+  (Probe Y Positioning Move,to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  #<p2y> = #5421
+
+  (Call sub "probe_x_minus" to Probe X- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<p2x> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_corner_x_minus_edge_angle> return
+  o120 endif
+
+  (edge width move to edge second probing point)
+  G91
+  F[#<probe_fast_fr>]
+  G38.3 Y[#<edge_width>]
+
+  #<p3y> = #5421
+
+  (Call sub "probe_x_minus" to Probe X- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<p3x> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o130 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_corner_x_minus_edge_angle> return
+  o130 endif
+
+  #<edge_delta> = [#<p2x> - #<p3x>]
+
+  #<edge_angle> = [ATAN [#<edge_delta>] / [#<edge_width>]]
+
+  #1011 = #<edge_delta>
+  (DEBUG, EVAL[vcp.getWidget{"edge_delta"}.setValue{#1011}])
+
+  #1012 = #<edge_angle>
+  (DEBUG, EVAL[vcp.getWidget{"edge_angle"}.setValue{#1012}])
+
+  #<c1xr> = [#<z1x> + [#<p2x> - #<z1x>] * COS[-#<edge_angle>] - [#<p2y> - #<z1y>] * SIN[-#<edge_angle>]]
+
+  #<c1yr> = [#<z1y> + [#<p1x> - #<z1x>] * SIN[-#<edge_angle>] + [#<p1y> - #<z1y>] * COS[-#<edge_angle>]]
+
+  #<c1x> = [#<z1x> + [#<c1xr> - #<z1x>] * COS[#<edge_angle>] - [#<c1yr> - #<z1y>] * SIN[#<edge_angle>]]
+
+  #<c1y> = [#<z1y> + [#<c1xr> - #<z1x>] * SIN[#<edge_angle>] + [#<c1yr> - #<z1y>] * COS[#<edge_angle>]]
+
+  (Probe Completion Move to Z Clearance Plane, and XY Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<c1x>] Y[#<c1y>]
+
+  (probe mode rules for WCO,Rotation and probe position measuring only)
+  o140 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<c1x> + #<workspace_x>] Y[#<c1y> + #<workspace_y>]
+  o140 endif
+
+  (probe mode rules for WCO,Rotation and probe position measuring only)
+  o150 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 1]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<c1x> + #<workspace_x>] Y[#<c1y> + #<workspace_y>] R[#<edge_angle>]
+  o150 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_corner_x_minus_edge_angle> endsub
+
+M2 (end program)

subroutines/probe_corner_x_plus_edge_angle.ngc

@@ -0,0 +1,173 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe Corner X plus Edge Angle for x,y,z 0,0,0 position)
+(Start probe position is over back left corner of stock)
+(inside the step off width square and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_corner_x_plus_edge_angle> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<wco_rotation> = #3031         (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  (set rotation offset to zero for new probe cycle)
+  G10 L2 P[#5220] R0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+     (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+     o<probe_corner_x_plus_edge_angle> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  #<z1x> = #5420
+
+  #<z1y> = #5421
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 y[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  #<p1x> = #5420
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<p1y> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_corner_x_plus_edge_angle> return
+  o110 endif
+
+  (Probe Y Positioning Move, up to Z clearance plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Probe Y Positioning Move, Traverse Workpiece at Z Clearance plane)
+  F[#<probe_traverse_fr>]
+  G38.3 X-[#<step_off_width>] Y-[#<step_off_width>]
+
+  (Probe Y Positioning Move,to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  #<p2y> = #5421
+
+  (Call sub "probe_x_plus" to Probe X+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<p2x> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_corner_x_plus_edge_angle> return
+  o120 endif
+
+  (edge width move to edge second probing point)
+  G91
+  F[#<probe_fast_fr>]
+  G38.3 Y-[#<edge_width>]
+
+  #<p3y> = #5421
+
+  (Call sub "probe_x_plus" to Probe X+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<p3x> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o130 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_corner_x_plus_edge_angle> return
+  o130 endif
+
+  #<edge_delta> = [#<p3x> - #<p2x>]
+
+  #<edge_angle> = [ATAN [#<edge_delta>] / [#<edge_width>]]
+
+  #1011 = #<edge_delta>
+  (DEBUG, EVAL[vcp.getWidget{"edge_delta"}.setValue{#1011}])
+
+  #1012 = #<edge_angle>
+  (DEBUG, EVAL[vcp.getWidget{"edge_angle"}.setValue{#1012}])
+
+  #<c1xr> = [#<z1x> + [#<p2x> - #<z1x>] * COS[-#<edge_angle>] - [#<p2y> - #<z1y>] * SIN[-#<edge_angle>]]
+
+  #<c1yr> = [#<z1y> + [#<p1x> - #<z1x>] * SIN[-#<edge_angle>] + [#<p1y> - #<z1y>] * COS[-#<edge_angle>]]
+
+  #<c1x> = [#<z1x> + [#<c1xr> - #<z1x>] * COS[#<edge_angle>] - [#<c1yr> - #<z1y>] * SIN[#<edge_angle>]]
+
+  #<c1y> = [#<z1y> + [#<c1xr> - #<z1x>] * SIN[#<edge_angle>] + [#<c1yr> - #<z1y>] * COS[#<edge_angle>]]
+
+  (Probe Completion Move to Z Clearance Plane, and XY Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<c1x>] Y[#<c1y>]
+
+  (probe mode rules for WCO,Rotation and probe position measuring only)
+  o140 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<c1x> + #<workspace_x>] Y[#<c1y> + #<workspace_y>]
+  o140 endif
+
+  (probe mode rules for WCO,Rotation and probe position measuring only)
+  o150 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 1]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<c1x> + #<workspace_x>] Y[#<c1y> + #<workspace_y>] R[#<edge_angle>]
+  o150 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_corner_x_plus_edge_angle> endsub
+
+M2 (end program)

subroutines/probe_corner_y_minus_edge_angle.ngc

@@ -0,0 +1,173 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe Corner Y minus Edge Angle for x,y,z 0,0,0 position)
+(Start probe position is over back right corner of stock)
+(inside the step off width square and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_corner_y_minus_edge_angle> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<wco_rotation> = #3031         (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+  
+  (set rotation offset to zero for new probe cycle)
+  G10 L2 P[#5220] R0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_corner_y_minus_edge_angle> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  #<z1x> = #5420
+
+  #<z1y> = #5421
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  #<p1y> = #5421
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<p1x> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_corner_y_minus_edge_angle> return
+  o110 endif
+
+  (Probe Y Positioning Move, up to Z clearance plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Probe Y Positioning Move, Traverse Workpiece at Z Clearance plane)
+  F[#<probe_traverse_fr>]
+  G38.3 X-[#<step_off_width>] Y[#<step_off_width>]
+
+  (Probe Y Positioning Move,to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  #<p2x> = #5420
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<p2y> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_corner_y_minus_edge_angle> return
+  o120 endif
+
+  (edge width move to edge second probing point)
+  G91
+  F[#<probe_fast_fr>]
+  G38.3 X-[#<edge_width>]
+
+  #<p3x> = #5420
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<p3y> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o130 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_corner_y_minus_edge_angle> return
+  o130 endif
+
+  #<edge_delta> = [#<p2y> - #<p3y>]
+
+  #<edge_angle> = [ATAN [#<edge_delta>] / [#<edge_width>]]
+
+  #1011 = #<edge_delta>
+  (DEBUG, EVAL[vcp.getWidget{"edge_delta"}.setValue{#1011}])
+
+  #1012 = #<edge_angle>
+  (DEBUG, EVAL[vcp.getWidget{"edge_angle"}.setValue{#1012}])
+
+  #<c1xr> = [#<z1x> + [#<p1x> - #<z1x>] * COS[-#<edge_angle>] - [#<p1y> - #<z1y>] * SIN[-#<edge_angle>]]
+
+  #<c1yr> = [#<z1y> + [#<p2x> - #<z1x>] * SIN[-#<edge_angle>] + [#<p2y> - #<z1y>] * COS[-#<edge_angle>]]
+
+  #<c1x> = [#<z1x> + [#<c1xr> - #<z1x>] * COS[#<edge_angle>] - [#<c1yr> - #<z1y>] * SIN[#<edge_angle>]]
+
+  #<c1y> = [#<z1y> + [#<c1xr> - #<z1x>] * SIN[#<edge_angle>] + [#<c1yr> - #<z1y>] * COS[#<edge_angle>]]
+
+  (Probe Completion Move to Z Clearance Plane, and XY Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<c1x>] Y[#<c1y>]
+
+  (probe mode rules for WCO,Rotation and probe position measuring only)
+  o140 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<c1x> + #<workspace_x>] Y[#<c1y> + #<workspace_y>]
+  o140 endif
+
+  (probe mode rules for WCO,Rotation and probe position measuring only)
+  o150 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 1]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<c1x> + #<workspace_x>] Y[#<c1y> + #<workspace_y>] R[#<edge_angle>]
+  o150 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_corner_y_minus_edge_angle> endsub
+
+M2 (end program)

subroutines/probe_corner_y_plus_edge_angle.ngc

@@ -0,0 +1,173 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe Corner Y Plus Edge Angle for x,y,z 0,0,0 position)
+(Start probe position is over front left corner of stock)
+(inside the step off width square and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_corner_y_plus_edge_angle> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<wco_rotation> = #3031         (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  (set rotation offset to zero for new probe cycle)
+  G10 L2 P[#5220] R0
+  
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_corner_y_plus_edge_angle> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  #<z1x> = #5420
+
+  #<z1y> = #5421
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X-[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  #<p1y> = #5421
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<p1x> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_corner_y_plus_edge_angle> return
+  o110 endif
+
+  (Probe Y Positioning Move, up to Z clearance plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Probe Y Positioning Move, Traverse Workpiece at Z Clearance plane)
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>] Y-[#<step_off_width>]
+
+  (Probe Y Positioning Move,to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  #<p2x> = #5420
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<p2y> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_corner_y_plus_edge_angle> return
+  o120 endif
+
+  (edge width move to edge second probing point)
+  G91
+  F[#<probe_fast_fr>]
+  G38.3 X[#<edge_width>]
+
+  #<p3x> = #5420
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<p3y> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o130 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_corner_y_plus_edge_angle> return
+  o130 endif
+
+  #<edge_delta> = [#<p3y> - #<p2y>]
+
+  #<edge_angle> = [ATAN [#<edge_delta>] / [#<edge_width>]]
+
+  #1011 = #<edge_delta>
+  (DEBUG, EVAL[vcp.getWidget{"edge_delta"}.setValue{#1011}])
+
+  #1012 = #<edge_angle>
+  (DEBUG, EVAL[vcp.getWidget{"edge_angle"}.setValue{#1012}])
+
+  #<c1xr> = [#<z1x> + [#<p1x> - #<z1x>] * COS[-#<edge_angle>] - [#<p1y> - #<z1y>] * SIN[-#<edge_angle>]]
+
+  #<c1yr> = [#<z1y> + [#<p2x> - #<z1x>] * SIN[-#<edge_angle>] + [#<p2y> - #<z1y>] * COS[-#<edge_angle>]]
+
+  #<c1x> = [#<z1x> + [#<c1xr> - #<z1x>] * COS[#<edge_angle>] - [#<c1yr> - #<z1y>] * SIN[#<edge_angle>]]
+
+  #<c1y> = [#<z1y> + [#<c1xr> - #<z1x>] * SIN[#<edge_angle>] + [#<c1yr> - #<z1y>] * COS[#<edge_angle>]]
+
+  (Probe Completion Move to Z Clearance Plane, and XY Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<c1x>] Y[#<c1y>]
+
+  (probe mode rules for WCO,Rotation and probe position measuring only)
+  o140 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<c1x> + #<workspace_x>] Y[#<c1y> + #<workspace_y>]
+  o140 endif
+
+  (probe mode rules for WCO,Rotation and probe position measuring only)
+  o150 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 1]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<c1x> + #<workspace_x>] Y[#<c1y> + #<workspace_y>] R[#<edge_angle>]
+  o150 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_corner_y_plus_edge_angle> endsub
+
+M2 (end program)

subroutines/probe_front_left_inside_corner.ngc

@@ -0,0 +1,123 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe front left inside corner for x,y,z 0,0,0 position)
+(Start probe position is over front left inside corner of stock)
+(inside the step off width square and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_front_left_inside_corner> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_front_left_inside_corner> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Traverse Workpiece Top at Z Clearance Height plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>] Y[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  G90
+  (Current X Position including offsets in current program units)
+  #<x_start> = #5420
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_front_left_inside_corner> return
+  o110 endif
+
+  (move to X start Position)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_start>]
+
+  (Current Y Position including offsets in current program units)
+  #<y_start> = #5421
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_minus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_front_left_inside_corner> return
+  o120 endif
+
+  (move to Y start Position)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_start>]
+
+  (Probe Completion Move to Z Clearance Plane, and X Zero, Y Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_minus_zero_edge>] Y[#<y_minus_zero_edge>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_minus_zero_edge> + #<workspace_x>]
+      G10 L2 P#5220 Y[#<y_minus_zero_edge> + #<workspace_y>]
+  o130 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_front_left_inside_corner> endsub
+
+M2 (end program)

subroutines/probe_front_left_top_corner.ngc

@@ -0,0 +1,119 @@
+(author: Chris P)
+(version: 0.5)
+(date: 06/27/24)
+
+(Probe front left top corner for x,y,z 0,0,0 position)
+(Start probe position is over front left corner of stock)
+(inside the step off width square and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_front_left_top_corner> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_front_left_top_corner> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X-[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_plus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_front_left_top_corner> return
+  o110 endif
+
+  (Probe Y Positioning Move, up to Z clearance plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Probe Y Positioning Move, Traverse Workpiece at Z Clearance plane)
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>] Y-[#<step_off_width>]
+
+  (Probe Y Positioning Move,to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_front_left_top_corner> return
+  o120 endif
+
+  (Probe Completion Move to Z Clearance Plane, and XY Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_plus_zero_edge>] Y[#<y_plus_zero_edge>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_plus_zero_edge> + #<workspace_x>]
+      G10 L2 P#5220 Y[#<y_plus_zero_edge> + #<workspace_y>]
+  o130 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_front_left_top_corner> endsub
+
+M2 (end program)

subroutines/probe_front_right_inside_corner.ngc

@@ -0,0 +1,123 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe front right inside corner for x,y,z 0,0,0 position)
+(Start probe position is over front right inside corner of stock)
+(inside the step off width square and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_front_right_inside_corner> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_front_right_inside_corner> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width X and Y)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X-[#<step_off_width>] Y[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  G90
+  (Current X Position including offsets in current program units)
+  #<x_start> = #5420
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_plus_zero_edge> = #<_value>
+
+ (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_front_right_inside_corner> return
+  o110 endif
+
+  (move to X start Position)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_start>]
+
+  (Current Y Position including offsets in current program units)
+  #<y_start> = #5421
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_minus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_front_right_inside_corner> return
+  o120 endif
+
+  (move to Y start Position)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_start>]
+
+  (Probe Completion Move to Z Clearance Plane, and X Zero, Y Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_plus_zero_edge>] Y[#<y_minus_zero_edge>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_plus_zero_edge> + #<workspace_x>]
+      G10 L2 P#5220 Y[#<y_minus_zero_edge> + #<workspace_y>]
+  o130 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_front_right_inside_corner> endsub
+
+M2 (end program)

subroutines/probe_front_right_top_corner.ngc

@@ -0,0 +1,120 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe front right top corner for x,y,z 0,0,0 position)
+(Start probe position is over front right corner of stock)
+(inside the step off width square and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_front_right_top_corner> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_front_right_top_corner> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_front_right_top_corner> return
+  o110 endif
+
+  (Probe Y Positioning Move, up to Z clearance plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Probe Y Positioning Move, Traverse Workpiece Top at Z Clearance Height plane)
+  F[#<probe_traverse_fr>]
+  G38.3 X-[#<step_off_width>] Y-[#<step_off_width>]
+
+  (Probe Y Positioning Move,to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_plus" to Probe y- side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_front_right_top_corner> return
+  o120 endif
+
+  (Probe Completion Move to Z Clearance Plane, and XY Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_minus_zero_edge>] Y[#<y_plus_zero_edge>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_minus_zero_edge> + #<workspace_x>]
+      G10 L2 P#5220 Y[#<y_plus_zero_edge> + #<workspace_y>]
+  o130 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_front_right_top_corner> endsub
+
+M2 (end program)

subroutines/probe_front_top_side.ngc

@@ -0,0 +1,92 @@
+(author: Chris P)
+(version: 0.5)
+(date: 06/27/24)
+
+(Probe front top side for y,z 0,0 position)
+(Start probe position is over front edge of stock)
+(inside the step off width distance and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<Probe_front_top_side> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+    (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<Probe_front_top_side> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe Y Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y-[#<step_off_width>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_front_top_side> return
+  o110 endif
+
+  (Probe Completion Move to Z Clearance Plane, and Y Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_plus_zero_edge>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o120 if [#<probe_mode> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 Y[#<y_plus_zero_edge> + #<workspace_y>]
+  o120 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<Probe_front_top_side> endsub
+
+M2 (end program)

subroutines/probe_left_top_side.ngc

@@ -0,0 +1,92 @@
+(author: Chris P)
+(version: 0.4)
+(date: 06/27/24)
+
+(Probe left top side for x,z 0,0 position)
+(Start probe position is over left side edge of stock)
+(inside the step off width distance and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<Probe_left_top_side> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<Probe_left_top_side> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X-[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_plus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_left_top_side> return
+  o110 endif
+
+  (Probe Completion Move to Z Clearance Plane, and Y Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_plus_zero_edge>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o120 if [#<probe_mode> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_plus_zero_edge> + #<workspace_x>]
+  o120 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<Probe_left_top_side> endsub
+
+M2 (end program)

subroutines/probe_rect_boss.ngc

@@ -0,0 +1,185 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe Boss in X and Y Axes, find center and z 0 position)
+(Start probe position is over center of stock in X and Y axis)
+(within max z distance, ensure all settings have been)
+(set properly according to help diagrams)
+
+o<probe_rect_boss> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<x_hint_boss_pocket> = #3026   (=0)
+  #<y_hint_boss_pocket> = #3027   (=0)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+  #<workspace_z> = #[5203 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_rect_boss> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probe Radius)
+  #<probe_radius> = [#<probe_diameter> / 2]
+
+  (Probe Centerline Offset)
+  #<probe_center_offset> = [#<probe_radius> - #<calibration_offset>]
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter> - [#<calibration_offset> * 2]]
+
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, X hint/2 + Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X-[[#<x_hint_boss_pocket>/2] + #<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (first side Probe Completion Move to Z Clearance Plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Positioning move in X, X Hint + Step Off Width at Rapid Speed)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_hint_boss_pocket> + #<step_off_width> + #<xy_clearance>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (probed center calulation)
+  #<x_center_probed> = [[#<x_minus_probed> + #<x_plus_probed>] / 2]
+
+  (calculate X Width Probed)
+  #<raw_width> = [#<x_minus_probed> - #<x_plus_probed>]
+
+  (Completed probed width calculations)
+  #<x_probed_width> = [#<raw_width> - #<probe_diameter_offset>]
+
+  #1001 = #<x_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"x_probed_width"}.setValue{#1001}])
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Probe Y Positioning Move, Y hint/2 + Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y-[[#<y_hint_boss_pocket>/2] + #<step_off_width>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (first side Probe Completion Move to Z Clearance Plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Positioning move in Y, Y Hint + Step Off Width at Rapid Speed)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_hint_boss_pocket> + #<step_off_width> + #<xy_clearance>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calulation)
+  #<y_center_probed> = [[#<y_minus_probed> + #<y_plus_probed>] / 2]
+
+  (calculate Y Width Probed)
+  #<raw_width> = [#<y_minus_probed> - #<y_plus_probed>]
+
+  (Completed probed width calculations)
+  #<y_probed_width> = [#<raw_width> - #<probe_diameter_offset>]
+
+  #1003 = #<y_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"y_probed_width"}.setValue{#1003}])
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>] Y[#<y_center_probed>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o110 if [#<probe_mode> EQ 0]
+      (Record XY Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_center_probed> + #<workspace_x>] Y[#<y_center_probed> + #<workspace_y>]
+  o110 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_rect_boss> endsub
+
+M2 (end program)

subroutines/probe_rect_pocket.ngc

@@ -0,0 +1,139 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe rect pocket center measure x and widths, find xy center position)
+(Start probe position is over left side edge of pocket wall)
+(inside the step off width distance and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_rect_pocket> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<x_hint_boss_pocket> = #3026   (=0)
+  #<y_hint_boss_pocket> = #3027   (=0)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_rect_pocket> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter> - [#<calibration_offset> * 2]]
+
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][3017][#3018 + #3026][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (probed center calculation)
+  #<x_center_probed> = [[#<x_plus_probed> + #<x_minus_probed>] / 2]
+
+  (calculate X Width Probed)
+  #<raw_width> = [#<x_plus_probed> - #<x_minus_probed>]
+
+  (Completed probed width calculations)
+  #<x_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1001 = #<x_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"x_probed_width"}.setValue{#1001}])
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  (Probe Completion Move to Z Clearance Plane, and X Zero, Y Zero)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Call sub "probe_y_plus" to Probe Y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][3017][#3018 + #3027 / 2][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (Call sub "probe_y_minus" to Probe Y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][3017][#3018 + #3027][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calculation)
+  #<y_center_probed> = [[#<y_plus_probed> + #<y_minus_probed>] / 2]
+
+  (calculate Y Width Probed)
+  #<raw_width> = [#<y_plus_probed> - #<y_minus_probed>]
+
+  (Completed probed width calculations)
+  #<y_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1003 = #<y_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"y_probed_width"}.setValue{#1003}])
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_center_probed>]
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o110 if [#<probe_mode> EQ 0]
+      (Record X Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_center_probed> + #<workspace_x>] Y[#<y_center_probed> + #<workspace_y>]
+  o110 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_rect_pocket> endsub
+
+M2 (end program)

subroutines/probe_rect_pocket_center_start.ngc

@@ -0,0 +1,121 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe rect pocket center measure x and y widths, find xy center position)
+(Start probe position is rough center of pocket probe tip below top edge)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_rect_pocket_center_start> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<x_hint_boss_pocket> = #3026   (=0)
+  #<y_hint_boss_pocket> = #3027   (=0)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_rect_pocket_center_start> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter> - [#<calibration_offset> * 2]]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][3017][#3018 + #3026 / 2][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][3017][#3018 + #3026][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (probed center calculation)
+  #<x_center_probed> = [[#<x_plus_probed> + #<x_minus_probed>] / 2]
+
+  (calculate X Width Probed)
+  #<raw_width> = [#<x_plus_probed> - #<x_minus_probed>]
+
+  (Completed probed width calculations)
+  #<x_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1001 = #<x_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"x_probed_width"}.setValue{#1001}])
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  (Probe Completion Move to X Zero, Y Zero)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Call sub "probe_y_plus" to Probe Y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][3017][#3018 + #3027 / 2][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (Call sub "probe_y_minus" to Probe Y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][3017][#3018 + #3027][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calculation)
+  #<y_center_probed> = [[#<y_plus_probed> + #<y_minus_probed>] / 2]
+
+  (calculate Y Width Probed)
+  #<raw_width> = [#<y_plus_probed> - #<y_minus_probed>]
+
+  (Completed probed width calculations)
+  #<y_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1003 = #<y_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"y_probed_width"}.setValue{#1003}])
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_center_probed>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o110 if [#<probe_mode> EQ 0]
+      (Record X and Y Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_center_probed> + #<workspace_x>] Y[#<y_center_probed> + #<workspace_y>]
+  o110 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_rect_pocket_center_start> endsub
+
+M2 (end program)

subroutines/probe_ridge_x.ngc

@@ -0,0 +1,129 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe Ridge in X Axis to find center and z 0 position)
+(Start probe position is over center of stock in the X axis)
+(within max z distance, ensure all settings have been)
+(set properly according to help diagrams)
+
+o<probe_ridge_x> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<x_hint_ridge_valley> = #3028  (=0)
+  #<y_hint_ridge_valley> = #3029  (=0)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_z> = #[5203 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_ridge_x> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probe Radius)
+  #<probe_radius> = [#<probe_diameter> / 2]
+
+  (Probe Centerline Offset)
+  #<probe_center_offset> = [#<probe_radius> - #<calibration_offset>]
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter> - [#<calibration_offset> * 2]]
+
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, X hint/2 + Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X-[[#<x_hint_ridge_valley>/2] + #<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (first side Probe Completion Move to Z Clearance Plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Positioning move in X, X Hint + Step Off Width at Rapid Speed)
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_hint_ridge_valley> + #<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (probed center calulation)
+  #<x_center_probed> = [[#<x_plus_probed> + #<x_minus_probed>] / 2]
+
+  (calculate X Width Probed)
+  #<raw_width> = [#<x_minus_probed> - #<x_plus_probed>]
+
+  (Completed probed width calculations)
+  #<x_probed_width> = [#<raw_width> - #<probe_diameter_offset>]
+
+  #1001 = #<x_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"x_probed_width"}.setValue{#1001}])
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  (Probe Completion Move to Z Clearance Plane, and X Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o110 if [#<probe_mode> EQ 0]
+      (Record X Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_center_probed> + #<workspace_x>]
+  o110 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_ridge_x> endsub
+
+M2 (end program)

subroutines/probe_ridge_y.ngc

@@ -0,0 +1,129 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe Ridge in Y Axis to find center and z 0 position)
+(Start probe position is over center of stock in the Y axis)
+(within max z distance, ensure all settings have been)
+(set properly according to help diagrams)
+
+o<probe_ridge_y> sub
+
+  (uses NGCGUI style arg spec)
+  #<probe_tool_number> = #3014
+  #<probe_slow_fr> = #3015
+  #<probe_fast_fr> = #3016
+  #<probe_traverse_fr> = #3017
+  #<max_xy_distance> = #3018
+  #<xy_clearance> = #3019
+  #<max_z_distance> = #3020
+  #<z_clearance> = #3021
+  #<extra_probe_depth> = #3022  
+  #<step_off_width> = #3023
+  #<edge_width> = #3024
+  #<x_hint_ridge_valley> = #3028
+  #<y_hint_ridge_valley> = #3029
+  #<probe_mode> = #3030
+  #<calibration_offset> = #3032
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_y> = #[5202 + [20 * #5220]]
+  #<workspace_z> = #[5203 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_ridge_y> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probe Radius)
+  #<probe_radius> = [#<probe_diameter> / 2]
+
+  (Probe Centerline Offset)
+  #<probe_center_offset> = [#<probe_radius> - #<calibration_offset>]
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter> - [#<calibration_offset> * 2]]
+
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe Y Positioning Move, Y hint/2 + Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y-[[#<y_hint_ridge_valley>/2] + #<step_off_width>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (first side Probe Completion Move to Z Clearance Plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Positioning move in Y, Y Hint + Step Off Width at Rapid Speed)
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_hint_ridge_valley> + #<step_off_width>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calulation)
+  #<y_center_probed> = [[#<y_plus_probed> + #<y_minus_probed>] / 2]
+
+  (calculate Y Width Probed)
+  #<raw_width> = [#<y_minus_probed> - #<y_plus_probed>]
+
+  (Completed probed width calculations)
+  #<y_probed_width> = [#<raw_width> - #<probe_diameter_offset>]
+
+  #1003 = #<y_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"y_probed_width"}.setValue{#1003}])
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  (Probe Completion Move to Z Clearance Plane, and X Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_center_probed>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o110 if [#<probe_mode> EQ 0]
+      (Record Y Zero in selected WCO)
+      G10 L2 P#5220 Y[#<y_center_probed> + #<workspace_y>]
+      (Probe Completion Move to Z Clearance Plane, and X Zero, Y Zero)
+  o110 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_ridge_y> endsub
+
+M2 (end program)

subroutines/probe_right_top_side.ngc

@@ -0,0 +1,91 @@
+(author: Chris P)
+(version: 0.4)
+(date: 06/27/24)
+
+(Probe right top side for x,z 0,0 position)
+(Start probe position is over right side edge of stock)
+(inside the step off width distance and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<Probe_right_top_side> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<Probe_right_top_side> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_zero_edge> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_right_top_side> return
+  o110 endif
+
+  (Probe Completion Move to Z Clearance Plane, and Y Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_minus_zero_edge>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o120 if [#<probe_mode> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_minus_zero_edge> + #<workspace_x>]
+  o120 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<Probe_right_top_side> endsub
+
+M2 (end program)

subroutines/probe_round_boss.ngc

@@ -0,0 +1,293 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe Boss in X and Y Axes, find center, Diam and z 0 position)
+(Start probe position is over center of stock in X and Y axis)
+(within max z distance, ensure all settings have been)
+(set properly according to help diagrams)
+
+o<probe_round_boss> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<diameter_hint> = #3025        (=0)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+  #<workspace_z> = #[5203 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_round_boss> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probe Radius)
+  #<probe_radius> = [#<probe_diameter> / 2]
+
+  (Probe Centerline Offset)
+  #<probe_center_offset> = [#<probe_radius> - #<calibration_offset>]
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter> - [#<calibration_offset> * 2]]
+
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, X hint/2 + Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X-[[#<diameter_hint> / 2] + [#<step_off_width>]]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (first side Probe Completion Move to Z Clearance Plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Positioning move in X, X Hint + Step Off Width at Rapid Speed)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<diameter_hint> + #<step_off_width> + #<xy_clearance>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (probed center calulation)
+  #<x_center_probed> = [[#<x_minus_probed> + #<x_plus_probed>] / 2]
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Probe Y Positioning Move, Y hint/2 + Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y-[[#<diameter_hint> / 2] + [#<step_off_width>]]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (first side Probe Completion Move to Z Clearance Plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Positioning move in Y, Y Hint + Step Off Width at Rapid Speed)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<diameter_hint> + #<step_off_width> + #<xy_clearance>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calulation)
+  #<y_center_probed> = [[#<y_minus_probed> + #<y_plus_probed>] / 2]
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  (Move to z clearance plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Move to Y Center)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_center_probed>]
+
+  (Probe X Positioning Move, X hint/2 + Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X-[[#<diameter_hint> / 2] + [#<step_off_width>]]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (first side Probe Completion Move to Z Clearance Plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Positioning move in X, X Hint + Step Off Width at Rapid Speed)
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<diameter_hint> + #<step_off_width> + #<xy_clearance>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (probed center calulation)
+  #<x_center_probed> = [[#<x_minus_probed> + #<x_plus_probed>] / 2]
+
+  (calculate X Width Probed)
+  o110 if [#<x_minus_probed> GT #<x_plus_probed>]
+      #<x_raw_width> = [#<x_minus_probed> - #<x_plus_probed>]
+  o110 else
+      #<x_raw_width> = [#<x_plus_probed> - #<x_minus_probed>]
+  o110 endif
+
+  (Completed probed width calculations)
+  #<x_probed_width> = [#<x_raw_width> - #<probe_diameter_offset>]
+
+  #1001 = #<x_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"x_probed_width"}.setValue{#1001}])
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Probe Y Positioning Move, Y hint/2 + Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y-[[#<diameter_hint> / 2] + [#<step_off_width>]]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (first side Probe Completion Move to Z Clearance Plane)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (Positioning move in Y, Y Hint + Step Off Width at Rapid Speed)
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<diameter_hint> + #<step_off_width> + #<xy_clearance>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calulation)
+  #<y_center_probed> = [[#<y_minus_probed> + #<y_plus_probed>] / 2]
+
+  (calculate Y Width Probed)
+  o120 if [#<y_minus_probed> GT #<y_plus_probed>]
+      #<y_raw_width> = [#<y_minus_probed> - #<y_plus_probed>]
+  o120 else
+      #<y_raw_width> = [#<y_plus_probed> - #<y_minus_probed>]
+  o120 endif
+
+  (Completed probed width calculations)
+  #<y_probed_width> = [#<y_raw_width> - #<probe_diameter_offset>]
+
+  #1003 = #<y_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"y_probed_width"}.setValue{#1003}])
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  #<averaged_diam> = [[#<x_probed_width> + #<y_probed_width>] / 2]
+
+  #1010 = #<averaged_diam>
+  (DEBUG, EVAL[vcp.getWidget{"averaged_diam"}.setValue{#1010}])
+
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>] Y[#<y_center_probed>]
+
+  #<x_zero> = [#<x_center_probed> + #<workspace_x>]
+
+  #<y_zero> = [#<y_center_probed> + #<workspace_y>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+      (Record XY Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_zero>] Y[#<y_zero>]
+  o130 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_round_boss> endsub
+
+M2 (end program)

subroutines/probe_round_pocket.ngc

@@ -0,0 +1,184 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe round pocket center measure x and y Diam, find xy center position)
+(Start probe position is over left side edge of pocket wall)
+(inside the step off width distance and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_round_pocket> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<diameter_hint> = #3025        (=0)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_round_pocket> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter> - [#<calibration_offset> * 2]]
+
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x-)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (Call sub "probe_x_plus" to Probe x+)
+  o<probe_x_plus> call [#3014][#3015][#3016][3017][#3018 + #3025][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (probed center calculation)
+  #<x_center_probed> = [[#<x_plus_probed> + #<x_minus_probed>] / 2]
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  (Probe Completion Move to Z Clearance Plane, and X Zero)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Call sub "probe_y_plus" to Probe Y+)
+  o<probe_y_plus> call [#3014][#3015][#3016][3017][#3018 + #3025 / 2][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (Call sub "probe_y_minus" to Probe Y-)
+  o<probe_y_minus> call [#3014][#3015][#3016][3017][#3018 + #3025][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calculation)
+  #<y_center_probed> = [[#<y_plus_probed> + #<y_minus_probed>] / 2]
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  (Probe Completion Move to Z Clearance Plane, Y Zero)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_center_probed>]
+
+  (Call sub "probe_x_minus" to Probe x-)
+  o<probe_x_minus> call [#3014][#3015][#3016][3017][#3018 + #3025 / 2][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (Call sub "probe_x_plus" to Probe x+)
+  o<probe_x_plus> call [#3014][#3015][#3016][3017][#3018 + #3025][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (probed center calculation)
+  #<x_center_probed> = [[#<x_plus_probed> + #<x_minus_probed>] / 2]
+
+  (calculate X Width Probed)
+  #<raw_width> = [#<x_plus_probed> - #<x_minus_probed>]
+
+  (Completed probed width calculations)
+  #<x_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1001 = #<x_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"x_probed_width"}.setValue{#1001}])
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Call sub "probe_y_plus" to Probe Y+)
+  o<probe_y_plus> call [#3014][#3015][#3016][3017][#3018 + #3025 / 2][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (Call sub "probe_y_minus" to Probe Y-)
+  o<probe_y_minus> call [#3014][#3015][#3016][3017][#3018 + #3025][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calculation)
+  #<y_center_probed> = [[#<y_plus_probed> + #<y_minus_probed>] / 2]
+
+  (calculate Y Width Probed)
+  #<raw_width> = [#<y_plus_probed> - #<y_minus_probed>]
+
+  (Completed probed diameter calculations)
+  #<y_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1003 = #<y_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"y_probed_width"}.setValue{#1003}])
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  #<averaged_diam> = [[#<x_probed_width> + #<y_probed_width>] / 2]
+
+  #1010 = #<averaged_diam>
+  (DEBUG, EVAL[vcp.getWidget{"averaged_diam"}.setValue{#1010}])
+
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_center_probed>]
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o110 if [#<probe_mode> EQ 0]
+      (Record Y Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_center_probed> + #<workspace_x>]
+      G10 L2 P#5220 Y[#<y_center_probed> + #<workspace_y>]
+  o110 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_round_pocket> endsub
+
+M2 (end program)

subroutines/probe_round_pocket_center_start.ngc

@@ -0,0 +1,167 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe round pocket center start measure x and y Diam, find xy center position)
+(Start probe position is rough center of pocket a safe distance below top edge)
+(no z move will be initiated in this routine. end position is hole center)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_round_pocket_center_start> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<diameter_hint> = #3025        (=0)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_round_pocket_center_start> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter> - [#<calibration_offset> * 2]]
+
+  (Call sub "probe_x_minus" to Probe x-)
+  o<probe_x_minus> call [#3014][#3015][#3016][3017][#3018 + #3025 / 2][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (Call sub "probe_x_plus" to Probe x+)
+  o<probe_x_plus> call [#3014][#3015][#3016][3017][#3018 + #3025][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (probed center calculation)
+  #<x_center_probed> = [[#<x_plus_probed> + #<x_minus_probed>] / 2]
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  (Probe Completion Move to X Zero)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Call sub "probe_y_plus" to Probe Y+)
+  o<probe_y_plus> call [#3014][#3015][#3016][3017][#3018 + #3025 / 2][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (Call sub "probe_y_minus" to Probe Y-)
+  o<probe_y_minus> call [#3014][#3015][#3016][3017][#3018 + #3025][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calculation)
+  #<y_center_probed> = [[#<y_plus_probed> + #<y_minus_probed>] / 2]
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  (Probe Completion Move to Y Zero)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_center_probed>]
+
+  (Call sub "probe_x_minus" to Probe x-)
+  o<probe_x_minus> call [#3014][#3015][#3016][3017][#3018 + #3025 / 2][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (Call sub "probe_x_plus" to Probe x+)
+  o<probe_x_plus> call [#3014][#3015][#3016][3017][#3018 + #3025][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (probed center calculation)
+  #<x_center_probed> = [[#<x_plus_probed> + #<x_minus_probed>] / 2]
+
+  (calculate X Width Probed)
+  #<raw_width> = [#<x_plus_probed> - #<x_minus_probed>]
+
+  (Completed probed width calculations)
+  #<x_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1001 = #<x_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"x_probed_width"}.setValue{#1001}])
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (Call sub "probe_y_plus" to Probe Y+)
+  o<probe_y_plus> call [#3014][#3015][#3016][3017][#3018 + #3025 / 2][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (Call sub "probe_y_minus" to Probe Y-)
+  o<probe_y_minus> call [#3014][#3015][#3016][3017][#3018 + #3025][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calculation)
+  #<y_center_probed> = [[#<y_plus_probed> + #<y_minus_probed>] / 2]
+
+  (calculate Y Width Probed)
+  #<raw_width> = [#<y_plus_probed> - #<y_minus_probed>]
+
+  (Completed probed diameter calculations)
+  #<y_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1003 = #<y_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"y_probed_width"}.setValue{#1003}])
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  #<averaged_diam> = [[#<x_probed_width> + #<y_probed_width>] / 2]
+
+  #1010 = #<averaged_diam>
+  (DEBUG, EVAL[vcp.getWidget{"averaged_diam"}.setValue{#1010}])
+
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_center_probed>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o110 if [#<probe_mode> EQ 0]
+      (Record Y Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_center_probed> + #<workspace_x>]
+      G10 L2 P#5220 Y[#<y_center_probed> + #<workspace_y>]
+  o110 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_round_pocket_center_start> endsub
+
+M2 (end program)

subroutines/probe_spindle_nose.ngc

@@ -0,0 +1,77 @@
+(author: Chris P)
+(version: 0.0)
+(date: 12/26/24)
+
+(Probe Spindle Nose in Z Minus direction over tool setter and set Spindle Zero Distance)
+(Start probe position is over toolsetter platter within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_spindle_nose> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+
+  #<probe_fast_fr> = #3004        (=10.0)
+  #<probe_slow_fr> = #3005        (=0)
+  #<probe_traverse_fr> = #3006    (=50)
+  #<max_z_distance> = #3007       (=12.5)
+  #<retract_distance> = #3009     (=0.1000)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  o100 if [2 EQ 2]
+    G49
+  o100 endif
+
+  #<offset_z> = #5422
+
+  (Initial Fast Z- Probe)
+  G91
+  F[#<probe_fast_fr>]
+  G38.2 Z-[#<max_z_distance>]
+  #<z_minus_probed> = #5063
+
+  (Probe Error check, #5070 will be 0 if failed)
+  o110 if [#5070 EQ 0]
+      (back to start point and feed)
+      G90
+      G1 F[#<probe_traverse_fr>] Z#<z>
+      F[#<probe_fast_fr>]
+      (return from sub)
+      o<probe_spindle_nose> return
+  o110 endif
+
+  (Move up retract_distance height for slow probe)
+  G90
+  G1 F[#<probe_traverse_fr>] Z[#<z_minus_probed> + #<retract_distance>]
+
+  (Slow Probe Rule, if Slow Probe FR is set to 0, Slow Probe is Bypassed)
+  o120 if [#<probe_slow_fr> GT 0]
+      (Initiate Slow Z- Probe)
+      G91
+      F[#<probe_slow_fr>]
+      G38.2 Z-[#<retract_distance> * 2]
+      #<z_minus_probed> = #5063
+      G90
+      G1 F[#<probe_traverse_fr>] Z[#<z_minus_probed> + #<retract_distance>]
+  o120 endif
+
+  (defines the edge as z_probed_position for DRO reporting)
+  #<z_minus_probed_position> = #<z_minus_probed>
+
+  (output to gui DRO "Z PROBED POSITION")
+  #1009 = #<z_minus_probed_position>
+  #3010 = [ABS[#<z_minus_probed_position> - #<offset_z>]]
+  #<max_z_travel_default> = [#3010 * 1.001]
+  #3007 = #<max_z_travel_default>
+
+  (DEBUG, EVAL[vcp.getWidget{"z_minus_probed_position"}.setValue{#1009}])
+  (DEBUG, EVAL[vcp.getWidget{"spindle_zero_height_3010"}.setValue{#3010}])
+  (DEBUG, EVAL[vcp.getWidget{"z_max_travel_3007"}.setValue{#3007}])
+
+  G53 G0 Z0.0
+
+o<probe_spindle_nose> endsub
+
+M2 (end program)

subroutines/probe_top_back_edge_angle.ngc

@@ -0,0 +1,131 @@
+(author: Chris P)
+(version: 0.4)
+(date: 06/27/24)
+
+(Probe back top edge angle for y,z 0,0 position and edge angle)
+(Start probe position is over back edge of stock, set edge width,)
+(step off width distance and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_top_back_edge_angle> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<wco_rotation> = #3031         (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  (set rotation offset to zero for new probe cycle)
+  G10 L2 P[#5220] R0
+
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_top_back_edge_angle> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  #<x_start_position> = #5420
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe Y Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<step_off_width>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_minus_zero_edge_start> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_top_back_edge_angle> return
+  o110 endif
+
+  (edge width move to edge second probing point)
+  G91
+  F[#<probe_fast_fr>]
+  G38.3 X-[#<edge_width>]
+
+  (Call sub "probe_y_minus" to Probe y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_minus_zero_edge_end> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_top_back_edge_angle> return
+  o120 endif
+
+  #<edge_delta> = [#<y_minus_zero_edge_start> - #<y_minus_zero_edge_end>]
+
+  #<edge_angle> = [ATAN [#<edge_delta>] / [#<edge_width>]]
+
+  #1011 = #<edge_delta>
+  (DEBUG, EVAL[vcp.getWidget{"edge_delta"}.setValue{#1011}])
+
+  #1012 = #<edge_angle>
+  (DEBUG, EVAL[vcp.getWidget{"edge_angle"}.setValue{#1012}])
+
+  (Probe Completion Move to Z Clearance Plane, and Y Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_start_position>] Y[#<y_minus_zero_edge_start>]
+
+  (probe mode rules for WCO, Rotation and probe position measuring only)
+  o130 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_start_position>] Y[#<y_minus_zero_edge_start> + #<workspace_y>]
+  o130 endif
+
+  (probe mode rules for WCO, Rotation and probe position measuring only)
+  o140 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 1]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_start_position>] Y[#<y_minus_zero_edge_start> + #<workspace_y>] R[#<edge_angle>]
+  o140 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_top_back_edge_angle> endsub
+
+M2 (end program)

subroutines/probe_top_front_edge_angle.ngc

@@ -0,0 +1,131 @@
+(author: Chris P)
+(version: 0.5)
+(date: 06/27/24)
+
+(Probe top front edge angle for y,z 0,0 position and edge angle)
+(Start probe position is over front edge of stock, set edge width,)
+(step off width distance and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_top_front_edge_angle> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<wco_rotation> = #3031         (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  (set rotation offset to zero for new probe cycle)
+  G10 L2 P[#5220] R0
+
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+    (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_top_front_edge_angle> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  #<x_start_position> = #5420
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe Y Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y-[#<step_off_width>]
+
+  (Probe Y Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_zero_edge_start> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_top_front_edge_angle> return
+  o110 endif
+
+  (edge width move to edge second probing point)
+  G91
+  F[#<probe_fast_fr>]
+  G38.3 X[#<edge_width>]
+
+  (Call sub "probe_y_plus" to Probe y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_zero_edge_end> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing Y Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_top_front_edge_angle> return
+  o120 endif
+
+  #<edge_delta> = [#<y_plus_zero_edge_end> - #<y_plus_zero_edge_start>]
+
+  #<edge_angle> = [ATAN [#<edge_delta>] / [#<edge_width>]]
+
+  #1011 = #<edge_delta>
+  (DEBUG, EVAL[vcp.getWidget{"edge_delta"}.setValue{#1011}])
+
+  #1012 = #<edge_angle>
+  (DEBUG, EVAL[vcp.getWidget{"edge_angle"}.setValue{#1012}])
+
+  (Probe Completion Move to Z Clearance Plane, and Y Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_start_position>] Y[#<y_plus_zero_edge_start>]
+
+  (probe mode rules for WCO, Rotation and probe position measuring only)
+  o130 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_start_position>] Y[#<y_plus_zero_edge_start> + #<workspace_y>]
+  o130 endif
+
+  (probe mode rules for WCO, Rotation and probe position measuring only)
+  o140 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 1]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_start_position>] Y[#<y_plus_zero_edge_start> + #<workspace_y>] R[#<edge_angle>]
+  o140 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_top_front_edge_angle> endsub
+
+M2 (end program)

subroutines/probe_top_left_edge_angle.ngc

@@ -0,0 +1,131 @@
+(author: Chris P)
+(version: 0.4)
+(date: 06/27/24)
+
+(Probe top left edge angle for y,z 0,0 position and edge angle)
+(Start probe position is over left edge of stock, set edge width,)
+(step off width distance and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_top_left_edge_angle> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<wco_rotation> = #3031         (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  (set rotation offset to zero for new probe cycle)
+  G10 L2 P[#5220] R0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_top_left_edge_angle> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  #<y_start_position> = #5421
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X-[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_plus_zero_edge_start> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_top_left_edge_angle> return
+  o110 endif
+
+  (edge width move to edge second probing point)
+  G91
+  F[#<probe_fast_fr>]
+  G38.3 Y-[#<edge_width>]
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_plus_zero_edge_end> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_top_left_edge_angle> return
+  o120 endif
+
+  #<edge_delta> = [#<x_plus_zero_edge_end> - #<x_plus_zero_edge_start>]
+
+  #<edge_angle> = [ATAN [#<edge_delta>] / [#<edge_width>]]
+
+  #1011 = #<edge_delta>
+  (DEBUG, EVAL[vcp.getWidget{"edge_delta"}.setValue{#1011}])
+
+  #1012 = #<edge_angle>
+  (DEBUG, EVAL[vcp.getWidget{"edge_angle"}.setValue{#1012}])
+
+  (Probe Completion Move to Z Clearance Plane, and Y Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_plus_zero_edge_start>] Y[#<y_start_position>]
+
+  (probe mode rules for WCO, Rotation and probe position measuring only)
+  o130 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_plus_zero_edge_start> + #<workspace_x>] Y[#<y_start_position>]
+  o130 endif
+
+  (probe mode rules for WCO, Rotation and probe position measuring only)
+  o140 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 1]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_plus_zero_edge_start> + #<workspace_x>] Y[#<y_start_position>] R[#<edge_angle>]
+  o140 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_top_left_edge_angle> endsub
+
+M2 (end program)

subroutines/probe_top_right_edge_angle.ngc

@@ -0,0 +1,131 @@
+(author: Chris P)
+(version: 0.4)
+(date: 06/27/24)
+
+(Probe top right edge angle for y,z 0,0 position and edge angle)
+(Start probe position is over right edge of stock, set edge width,)
+(step off width distance and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_top_right_edge_angle> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<wco_rotation> = #3031         (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  (set rotation offset to zero for new probe cycle)
+  G10 L2 P[#5220] R0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_top_right_edge_angle> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probing depth from the z probed clearance height, used for z moves)
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  #<y_start_position> = #5421
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_zero_edge_start> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o110 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_top_right_edge_angle> return
+  o110 endif
+
+  (edge width move to edge second probing point)
+  G91
+  F[#<probe_fast_fr>]
+  G38.3 Y[#<edge_width>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_zero_edge_end> = #<_value>
+
+  (value returned safety check, aborts if no value returned)
+  o120 if [#<probe_mode> EQ 1 AND #<_value_returned> NE 1]
+      (DEBUG, Missing X Sub returned edge parameter, aborting)
+      M50 P1
+      o<probe_top_right_edge_angle> return
+  o120 endif
+
+  #<edge_delta> = [#<x_minus_zero_edge_start> - #<x_minus_zero_edge_end>]
+
+  #<edge_angle> = [ATAN [#<edge_delta>] / [#<edge_width>]]
+
+  #1011 = #<edge_delta>
+  (DEBUG, EVAL[vcp.getWidget{"edge_delta"}.setValue{#1011}])
+
+  #1012 = #<edge_angle>
+  (DEBUG, EVAL[vcp.getWidget{"edge_angle"}.setValue{#1012}])
+
+  (Probe Completion Move to Z Clearance Plane, and Y Zero)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_minus_zero_edge_start>] Y[#<y_start_position>]
+
+  (probe mode rules for WCO, Rotation and probe position measuring only)
+  o130 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 0]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_minus_zero_edge_start> + #<workspace_x>] Y[#<y_start_position>]
+  o130 endif
+
+  (probe mode rules for WCO, Rotation and probe position measuring only)
+  o140 if [#<probe_mode> EQ 0 AND #<wco_rotation> EQ 1]
+      (Record Zero in selected axes and WCO)
+      G10 L2 P#5220 X[#<x_minus_zero_edge_start> + #<workspace_x>] Y[#<y_start_position>] R[#<edge_angle>]
+  o140 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_top_right_edge_angle> endsub
+
+M2 (end program)

subroutines/probe_valley_x.ngc

@@ -0,0 +1,109 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe valley in x, find Z0, X0 valley center position)
+(Start probe position is over left side edge of valley wall)
+(inside the step off width distance and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_valley_x> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<x_hint_ridge_valley> = #3028  (=0)
+  #<y_hint_ridge_valley> = #3029  (=0)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_valley_x> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter> - [#<calibration_offset> * 2]]
+
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe X Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<step_off_width>]
+
+  (Probe X Positioning Move, to Probing Depth)
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][3017][#3018 + #3028][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (probed center calculation)
+  #<x_center_probed> = [[#<x_plus_probed> + #<x_minus_probed>] / 2]
+
+  (calculate X Width Probed)
+  #<raw_width> = [#<x_plus_probed> - #<x_minus_probed>]
+
+  (Completed probed width calculations)
+  #<x_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1001 = #<x_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"x_probed_width"}.setValue{#1001}])
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  (Probe Completion Move to Z Clearance Plane, and X Zero)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o110 if [#<probe_mode> EQ 0]
+      (Record X Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_center_probed> + #<workspace_x>]
+  o110 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_valley_x> endsub
+
+M2 (end program)

subroutines/probe_valley_x_center_start.ngc

@@ -0,0 +1,91 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe valley in x, find X zero valley center position)
+(Start probe position is centered between valley walls)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_valley_x_center_start> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<x_hint_ridge_valley> = #3028  (=0)
+  #<y_hint_ridge_valley> = #3029  (=0)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_valley_x_center_start> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter> - [#<calibration_offset> * 2]]
+
+  (Call sub "probe_x_minus" to Probe x- side of Workpiece)
+  o<probe_x_minus> call [#3014][#3015][#3016][3017][#3018 + #3028 / 2][#3019][#3032]
+
+  #<x_minus_probed> = #5061
+
+  (Call sub "probe_x_plus" to Probe x+ side of Workpiece)
+  o<probe_x_plus> call [#3014][#3015][#3016][3017][#3018 + #3028][#3019][#3032]
+
+  #<x_plus_probed> = #5061
+
+  (probed center calculation)
+  #<x_center_probed> = [[#<x_plus_probed> + #<x_minus_probed>] / 2]
+
+  (calculate X Width Probed)
+  #<raw_width> = [#<x_plus_probed> - #<x_minus_probed>]
+
+  (Completed probed width calculations)
+  #<x_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1001 = #<x_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"x_probed_width"}.setValue{#1001}])
+
+  #1002 = #<x_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1002}])
+
+  (Probe Completion Move to X Zero)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 X[#<x_center_probed>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o110 if [#<probe_mode> EQ 0]
+      (Record X Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_center_probed> + #<workspace_x>]
+  o110 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_valley_x_center_start> endsub
+
+M2 (end program)

subroutines/probe_valley_y.ngc

@@ -0,0 +1,107 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe valley in Y, find Z0, Y0 valley center position)
+(Start probe position is over back side edge of valley wall)
+(inside the step off width distance and within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_valley_y> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<x_hint_ridge_valley> = #3028  (=0)
+  #<y_hint_ridge_valley> = #3029  (=0)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_valley_y> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter> - [#<calibration_offset> * 2]]
+
+  #<z_probe_stack> = [#<z_clearance> + #<probe_diameter> + #<extra_probe_depth>]
+
+  (Call sub "probe_z_minus_sub" to Probe top of Workpiece)
+  o<probe_z_minus_sub> call [#3014][#3015][#3016][#3017][#3020][#3021][#3030]
+
+  (Probe Y Positioning Move, Step Off Width)
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Y-[#<step_off_width>]
+  F[#<probe_fast_fr>]
+  G38.3 Z-[#<z_probe_stack>]
+
+  (Call sub "probe_y_plus" to Probe Y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][#3017][#3018][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (Call sub "probe_y_minus_sub" to Probe Y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][3017][#3018 + #3029][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calculation)
+  #<y_center_probed> = [[#<y_plus_probed> + #<y_minus_probed>] / 2]
+
+  (calculate Y Width Probed)
+  #<raw_width> = [#<y_plus_probed> - #<y_minus_probed>]
+
+  (Completed probed width calculations)
+  #<y_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1003 = #<y_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"y_probed_width"}.setValue{#1003}])
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  (Probe Completion Move to Z Clearance Plane, and X Zero)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_center_probed>]
+  G91
+  F[#<probe_traverse_fr>]
+  G38.3 Z[#<z_probe_stack>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o110 if [#<probe_mode> EQ 0]
+      (Record X Zero in selected WCO)
+      G10 L2 P#5220 Y[#<y_center_probed> + #<workspace_y>]
+  o110 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_valley_y> endsub
+
+M2 (end program)

subroutines/probe_valley_y_center_start.ngc

@@ -0,0 +1,91 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe valley in Y find Y0 valley center position)
+(Start probe position is rough center between valley walls)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_valley_y_center_start> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<edge_width> = #3024           (=0.5000)
+  #<x_hint_ridge_valley> = #3028  (=0)
+  #<y_hint_ridge_valley> = #3029  (=0)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_valley_y_center_start> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (remove probe tip diam and cal offset from probed width calculations)
+  #<probe_diameter_offset> = [#<probe_diameter> - [#<calibration_offset> * 2]]
+
+  (Call sub "probe_y_plus" to Probe Y+ side of Workpiece)
+  o<probe_y_plus> call [#3014][#3015][#3016][3017][#3018 + #3029 / 2][#3019][#3032]
+
+  #<y_plus_probed> = #5062
+
+  (Call sub "probe_y_minus_sub" to Probe Y- side of Workpiece)
+  o<probe_y_minus> call [#3014][#3015][#3016][3017][#3018 + #3029][#3019][#3032]
+
+  #<y_minus_probed> = #5062
+
+  (probed center calculation)
+  #<y_center_probed> = [[#<y_plus_probed> + #<y_minus_probed>] / 2]
+
+  (calculate Y Width Probed)
+  #<raw_width> = [#<y_plus_probed> - #<y_minus_probed>]
+
+  (Completed probed width calculations)
+  #<y_probed_width> = [#<raw_width> + #<probe_diameter_offset>]
+
+  #1003 = #<y_probed_width>
+  (DEBUG, EVAL[vcp.getWidget{"y_probed_width"}.setValue{#1003}])
+
+  #1004 = #<y_center_probed>
+  (DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1004}])
+
+  (Probe Completion Move to Z Clearance Plane, and X Zero)
+  G90
+  F[#<probe_traverse_fr>]
+  G38.3 Y[#<y_center_probed>]
+
+  (probe mode rules for WCO or probe position measuring only)
+  o110 if [#<probe_mode> EQ 0]
+      (Record X Zero in selected WCO)
+      G10 L2 P#5220 Y[#<y_center_probed> + #<workspace_y>]
+  o110 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_valley_y_center_start> endsub
+
+M2 (end program)

subroutines/probe_x_minus.ngc

@@ -0,0 +1,85 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe X Minus direction and set X 0 in current WCO)
+(Start probe position to the right side edge of stock)
+(inside the max xy distance with the probe tip below the stock top edge)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_x_minus> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #1
+  #<probe_slow_fr> = #2
+  #<probe_fast_fr> = #3
+  #<probe_traverse_fr> = #4
+  #<max_xy_distance> = #5
+  #<xy_clearance> = #6
+  #<calibration_offset> = #7
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      o<probe_x_minus> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probe Radius)
+  #<probe_radius> = [#<probe_diameter> / 2]
+
+  (Probe Centerline Offset)
+  #<probe_center_offset> = [#<probe_radius> - #<calibration_offset>]
+
+  (Current X Position including offsets in current program units)
+  #<x> = #5420
+
+  (Initiate Fast X- Probe)
+  G91
+  F[#<probe_fast_fr>]
+  G38.2 X-[#<max_xy_distance>]
+  #<x_minus_probed> = #5061
+
+  (Probe Error check, #5070 will be 0 if failed)
+  o110 if [#5070 EQ 0]
+      (back to start point and feed)
+      G90
+      G1 F[#<probe_traverse_fr>] X#<x>
+      F[#<probe_fast_fr>]
+      (return from sub)
+      o<probe_x_minus> return
+  o110 endif
+
+  (Move to xy_clearance distance for slow probe)
+  G90
+  G1 F[#<probe_traverse_fr>] X[#<x_minus_probed> + #<xy_clearance>]
+
+  (Slow Probe Rule, if Slow Probe FR is set to 0, Slow Probe is Bypassed)
+  o120 if [#<probe_slow_fr> GT 0]
+      (Initiate Slow X- Probe)
+      G91
+      F[#<probe_slow_fr>]
+      G38.2 X-[#<xy_clearance> * 2]
+      #<x_minus_probed> = #5061
+      G90
+      G1 F[#<probe_traverse_fr>] X[#<x_minus_probed> + #<xy_clearance>]
+  o120 endif
+
+  #<x_minus_zero_edge> = [#<x_minus_probed> - #<probe_center_offset>]
+
+  (defines the edge as x_probed_position for DRO reporting)
+  #<x_minus_probed_position> = #<x_minus_zero_edge>
+
+  (output to gui DRO "X PROBED POSITION")
+  #1005 = #<x_minus_probed_position>
+  (DEBUG, EVAL[vcp.getWidget{"x_minus_probed_position"}.setValue{#1005}])
+
+o<probe_x_minus> endsub [#<x_minus_zero_edge>]
+
+M2 (end program)

subroutines/probe_x_minus_wco.ngc

@@ -0,0 +1,105 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe X Minus direction and set X 0 in current WCO)
+(Start probe position to the right side edge of stock)
+(inside the max xy distance with the probe tip below the stock top edge)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_x_minus_wco> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+  
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_x_minus_wco> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probe Radius)
+  #<probe_radius> = [#<probe_diameter> / 2]
+
+  (Probe Centerline Offset)
+  #<probe_center_offset> = [#<probe_radius> - #<calibration_offset>]
+
+  (Current X Position including offsets in current program units)
+  #<x> = #5420
+
+  (Initiate Fast X- Probe)
+  G91
+  F[#<probe_fast_fr>]
+  G38.2 X-[#<max_xy_distance>]
+  #<x_minus_probed> = #5061
+
+  (Probe Error check, #5070 will be 0 if failed)
+  o110 if [#5070 EQ 0]
+      (back to start point and feed)
+      G90
+      G1 F[#<probe_traverse_fr>] X#<x>
+      F[#<probe_fast_fr>]
+      M50 P1
+      o<probe_x_minus_wco> return
+  o110 endif
+
+  (Move to xy_clearance distance for slow probe)
+  G90
+  G1 F[#<probe_traverse_fr>] X[#<x_minus_probed> + #<xy_clearance>]
+
+  (Slow Probe Rule, if Slow Probe FR is set to 0, Slow Probe is Bypassed)
+  o120 if [#<probe_slow_fr> GT 0]
+      (Initiate Slow X- Probe)
+      G91
+      F[#<probe_slow_fr>]
+      G38.2 X-[#<xy_clearance> * 2]
+      #<x_minus_probed> = #5061
+      G90
+      G1 F[#<probe_traverse_fr>] X[#<x_minus_probed> + #<xy_clearance>]
+  o120 endif
+
+  #<x_minus_zero_edge> = [#<x_minus_probed> - #<probe_center_offset>]
+
+  (defines the edge as x_probed_position for DRO reporting)
+  #<x_minus_probed_position> = #<x_minus_zero_edge>
+  
+  (output to gui DRO "X PROBED POSITION")
+  #1005 = #<x_minus_probed_position>
+  (DEBUG, EVAL[vcp.getWidget{"x_minus_probed_position"}.setValue{#1005}])
+
+  (probe mode rule for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+      (Record X Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_minus_zero_edge> + #<workspace_x>]
+  o130 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_x_minus_wco> endsub
+
+M2 (end program)

subroutines/probe_x_plus.ngc

@@ -0,0 +1,85 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe X plus direction and set X 0 in current WCO)
+(Start probe position to the left side edge of stock)
+(inside the max xy distance with the probe tip below the stock top edge)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_x_plus> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #1
+  #<probe_slow_fr> = #2
+  #<probe_fast_fr> = #3
+  #<probe_traverse_fr> = #4
+  #<max_xy_distance> = #5
+  #<xy_clearance> = #6
+  #<calibration_offset> = #7
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      o<probe_x_plus> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probe Radius)
+  #<probe_radius> = [#<probe_diameter> / 2]
+
+  (Probe Centerline Offset)
+  #<probe_center_offset> = [#<probe_radius> - #<calibration_offset>]
+
+  (Current X Position including offsets in current program units)
+  #<x> = #5420
+
+  (Initiate Fast X+ Probe)
+  G91
+  F[#<probe_fast_fr>]
+  G38.2 X[#<max_xy_distance>]
+  #<x_plus_probed> = #5061
+
+  (Probe Error check, #5070 will be 0 if failed)
+  o110 if [#5070 EQ 0]
+      (back to start point and feed)
+      G90
+      G1 F[#<probe_traverse_fr>] X#<x>
+      F[#<probe_fast_fr>]
+      (return from sub)
+      o<probe_x_plus> return
+  o110 endif
+
+  (Move to xy_clearance distance for slow probe)
+  G90
+  G1 F[#<probe_traverse_fr>] X[#<x_plus_probed> - #<xy_clearance>]
+
+  (Slow Probe Rule, if Slow Probe FR is set to 0, Slow Probe is Bypassed)
+  o120 if [#<probe_slow_fr> GT 0]
+      (Initiate Slow X+ Probe)
+      G91
+      F[#<probe_slow_fr>]
+      G38.2 X[#<xy_clearance> * 2]
+      #<x_plus_probed> = #5061
+      G90
+      G1 F[#<probe_traverse_fr>] X[#<x_plus_probed> - #<xy_clearance>]
+  o120 endif
+
+  #<x_plus_zero_edge> = [#<x_plus_probed> + #<probe_center_offset>]
+
+  (defines the edge as x_probed_position for DRO reporting)
+  #<x_plus_probed_position> = #<x_plus_zero_edge>
+
+  (output to gui DRO "X PROBED POSITION")
+  #1006 = #<x_plus_probed_position>
+  (DEBUG, EVAL[vcp.getWidget{"x_plus_probed_position"}.setValue{#1006}])
+
+o<probe_x_plus> endsub [#<x_plus_zero_edge>]
+
+M2 (end program)

subroutines/probe_x_plus_wco.ngc

@@ -0,0 +1,105 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe X plus direction and set X 0 in current WCO)
+(Start probe position to the left side edge of stock)
+(inside the max xy distance with the probe tip below the stock top edge)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_x_plus_wco> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_x> = #[5201 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_x_plus_wco> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probe Radius)
+  #<probe_radius> = [#<probe_diameter> / 2]
+
+  (Probe Centerline Offset)
+  #<probe_center_offset> = [#<probe_radius> - #<calibration_offset>]
+
+  (Current X Position including offsets in current program units)
+  #<x> = #5420
+
+  (Initiate Fast X+ Probe)
+  G91
+  F[#<probe_fast_fr>]
+  G38.2 X[#<max_xy_distance>]
+  #<x_plus_probed> = #5061
+
+  (Probe Error check, #5070 will be 0 if failed)
+  o110 if [#5070 EQ 0]
+      (back to start point and feed)
+      G90
+      G1 F[#<probe_traverse_fr>] X#<x>
+      F[#<probe_fast_fr>]
+      M50 P1
+      o<probe_x_plus_wco> return
+  o110 endif
+
+  (Move to xy_clearance distance for slow probe)
+  G90
+  G1 F[#<probe_traverse_fr>] X[#<x_plus_probed> - #<xy_clearance>]
+
+  (Slow Probe Rule, if Slow Probe FR is set to 0, Slow Probe is Bypassed)
+  o120 if [#<probe_slow_fr> GT 0]
+      (Initiate Slow X+ Probe)
+      G91
+      F[#<probe_slow_fr>]
+      G38.2 X[#<xy_clearance> * 2]
+      #<x_plus_probed> = #5061
+      G90
+      G1 F[#<probe_traverse_fr>] X[#<x_plus_probed> - #<xy_clearance>]
+  o120 endif
+
+  #<x_plus_zero_edge> = [#<x_plus_probed> + #<probe_center_offset>]
+
+  (defines the edge as x_probed_position for DRO reporting)
+  #<x_plus_probed_position> = #<x_plus_zero_edge>
+
+  (output to gui DRO "X PROBED POSITION")
+  #1006 = #<x_plus_probed_position>
+  (DEBUG, EVAL[vcp.getWidget{"x_plus_probed_position"}.setValue{#1006}])
+
+  (probe mode rule for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+      (Record X Zero in selected WCO)
+      G10 L2 P#5220 X[#<x_plus_zero_edge> + #<workspace_x>]
+  o130 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_x_plus_wco> endsub
+
+M2 (end program)

subroutines/probe_y_minus.ngc

@@ -0,0 +1,85 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe Y Minus direction to locate edge, end at clearance distance)
+(Start probe position to the back side edge of stock)
+(inside the max xy distance with the probe tip below the stock top edge)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_y_minus> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #1
+  #<probe_slow_fr> = #2
+  #<probe_fast_fr> = #3
+  #<probe_traverse_fr> = #4
+  #<max_xy_distance> = #5
+  #<xy_clearance> = #6
+  #<calibration_offset> = #7
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      o<probe_y_minus> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probe Radius)
+  #<probe_radius> = [#<probe_diameter> / 2]
+
+  (Probe Centerline Offset)
+  #<probe_center_offset> = [#<probe_radius> - #<calibration_offset>]
+
+  (Current Y Position including offsets in current program units)
+  #<y> = #5421
+
+  (Initiate Fast Y- Probe)
+  G91
+  F[#<probe_fast_fr>]
+  G38.2 y-[#<max_xy_distance>]
+  #<y_minus_probed> = #5062
+
+  (Probe Error check, #5070 will be 0 if failed)
+  o110 if [#5070 EQ 0]
+      (back to start point and feed)
+      G90
+      G1 F[#<probe_traverse_fr>] Y#<y>
+      F[#<probe_fast_fr>]
+      (return from sub)
+      o<probe_y_minus> return
+  o110 endif
+
+  (Move to xy_clearance distance for slow probe)
+  G90
+  G1 F[#<probe_traverse_fr>] Y[#<y_minus_probed> + #<xy_clearance>]
+
+  (Slow Probe Rule, if Slow Probe FR is set to 0, Slow Probe is Bypassed)
+  o120 if [#<probe_slow_fr> GT 0]
+      (Initiate Slow Y- Probe)
+      G91
+      F[#<probe_slow_fr>]
+      G38.2 Y-[#<xy_clearance> * 2]
+      #<y_minus_probed> = #5062
+      G90
+      G1 F[#<probe_traverse_fr>] Y[#<y_minus_probed> + #<xy_clearance>]
+  o120 endif
+
+  #<y_minus_zero_edge> = [#5062 - #<probe_center_offset>]
+
+  (defines the edge as y_probed_position for DRO reporting)
+  #<y_minus_probed_position> = #<y_minus_zero_edge>
+
+  (output to gui DRO "Y PROBED POSITION")
+  #1007 = #<y_minus_probed_position>
+  (DEBUG, EVAL[vcp.getWidget{"y_minus_probed_position"}.setValue{#1007}])
+
+o<probe_y_minus> endsub [#<y_minus_zero_edge>]
+
+M2 (end program)

subroutines/probe_y_minus_wco.ngc

@@ -0,0 +1,105 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe Y Minus direction and set Y 0 in current WCO)
+(Start probe position to the back side edge of stock)
+(inside the max xy distance with the probe tip below the stock top edge)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_y_minus_wco> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_y_minus_wco> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probe Radius)
+  #<probe_radius> = [#<probe_diameter> / 2]
+
+  (Probe Centerline Offset)
+  #<probe_center_offset> = [#<probe_radius> - #<calibration_offset>]
+
+  (Current Y Position including offsets in current program units)
+  #<y> = #5421
+
+  (Initiate Fast Y- Probe)
+  G91
+  F[#<probe_fast_fr>]
+  G38.2 y-[#<max_xy_distance>]
+  #<y_minus_probed> = #5062
+
+  (Probe Error check, #5070 will be 0 if failed)
+  o110 if [#5070 EQ 0]
+      (back to start point and feed)
+      G90
+      G1 F[#<probe_traverse_fr>] Y#<y>
+      F[#<probe_fast_fr>]
+      M50 P1
+      o<probe_y_minus_wco> return
+  o110 endif
+
+  (Move to xy_clearance distance for slow probe)
+  G90
+  G1 F[#<probe_traverse_fr>] Y[#<y_minus_probed> + #<xy_clearance>]
+
+  (Slow Probe Rule, if Slow Probe FR is set to 0, Slow Probe is Bypassed)
+  o120 if [#<probe_slow_fr> GT 0]
+      (Initiate Slow Y- Probe)
+      G91
+      F[#<probe_slow_fr>]
+      G38.2 Y-[#<xy_clearance> * 2]
+      #<y_minus_probed> = #5062
+      G90
+      G1 F[#<probe_traverse_fr>] Y[#<y_minus_probed> + #<xy_clearance>]
+  o120 endif
+
+  #<y_minus_zero_edge> = [#5062 - #<probe_center_offset>]
+
+  (defines the edge as y_probed_position for DRO reporting)
+  #<y_minus_probed_position> = #<y_minus_zero_edge>
+
+  (output to gui DRO "Y PROBED POSITION")
+  #1007 = #<y_minus_probed_position>
+  (DEBUG, EVAL[vcp.getWidget{"y_minus_probed_position"}.setValue{#1007}])
+
+  (probe mode rule for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+      (Record Y Zero in selected WCO)
+      G10 L2 P#5220 Y[#<y_minus_zero_edge> + #<workspace_y>]
+  o130 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_y_minus_wco> endsub
+
+M2 (end program)

subroutines/probe_y_plus.ngc

@@ -0,0 +1,85 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe Y plus direction to locate edge, end at clearance distance)
+(Start probe position to the front side edge of stock)
+(inside the max xy distance with the probe tip below the stock top edge)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_y_plus> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #1
+  #<probe_slow_fr> = #2
+  #<probe_fast_fr> = #3
+  #<probe_traverse_fr> = #4
+  #<max_xy_distance> = #5
+  #<xy_clearance> = #6
+  #<calibration_offset> = #7
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      o<probe_y_plus> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probe Radius)
+  #<probe_radius> = [#<probe_diameter> / 2]
+
+  (Probe Centerline Offset)
+  #<probe_center_offset> = [#<probe_radius> - #<calibration_offset>]
+
+  (Current Y Position including offsets in current program units)
+  #<y> = #5421
+
+  (Initiate Fast y+ Probe)
+  G91
+  F[#<probe_fast_fr>]
+  G38.2 Y[#<max_xy_distance>]
+  #<y_plus_probed> = #5062
+
+  (Probe Error check, #5070 will be 0 if failed)
+  o110 if [#5070 EQ 0]
+      (back to start point and feed)
+      G90
+      G1 F[#<probe_traverse_fr>] Y#<y>
+      F[#<probe_fast_fr>]
+      (return from sub)
+      o<probe_y_plus> return
+  o110 endif
+
+  (Move to xy_clearance distance for slow probe)
+  G90
+  G1 F[#<probe_traverse_fr>] Y[#<y_plus_probed> - #<xy_clearance>]
+
+  (Slow Probe Rule, if Slow Probe FR is set to 0, Slow Probe is Bypassed)
+  o120 if [#<probe_slow_fr> GT 0]
+      (Initiate Slow Y+ Probe)
+      G91
+      F[#<probe_slow_fr>]
+      G38.2 Y[#<xy_clearance> * 2]
+      #<y_plus_probed> = #5062
+      G90
+      G1 F[#<probe_traverse_fr>] Y[#<y_plus_probed> - #<xy_clearance>]
+  o120 endif
+
+  #<y_plus_zero_edge> = [#5062 + #<probe_center_offset>]
+
+  (defines the edge as y_probed_position for DRO reporting)
+  #<y_plus_probed_position> = #<y_plus_zero_edge>
+
+  (output to gui DRO "Y PROBED POSITION")
+  #1008 = #<y_plus_probed_position>
+  (DEBUG, EVAL[vcp.getWidget{"y_plus_probed_position"}.setValue{#1008}])
+
+o<probe_y_plus> endsub [#<y_plus_zero_edge>]
+
+M2 (end program)

subroutines/probe_y_plus_wco.ngc

@@ -0,0 +1,105 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe Y plus direction and set Y 0 in current WCO)
+(Start probe position to the front side edge of stock)
+(inside the max xy distance with the probe tip below the stock top edge)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_y_plus_wco> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_xy_distance> = #3018      (=0.5000)
+  #<xy_clearance> = #3019         (=0.1000)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<extra_probe_depth> = #3022    (=0.0000)  
+  #<step_off_width> = #3023       (=0.5000)
+  #<probe_mode> = #3030           (=0)
+  #<calibration_offset> = #3032   (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_y> = #[5202 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_y_plus_wco> return
+  o100 endif
+
+  (Probe Diameter)
+  #<probe_diameter> = #5410
+
+  (Probe Radius)
+  #<probe_radius> = [#<probe_diameter> / 2]
+
+  (Probe Centerline Offset)
+  #<probe_center_offset> = [#<probe_radius> - #<calibration_offset>]
+
+  (Current Y Position including offsets in current program units)
+  #<y> = #5421
+
+  (Initiate Fast y+ Probe)
+  G91
+  F[#<probe_fast_fr>]
+  G38.2 Y[#<max_xy_distance>]
+  #<y_plus_probed> = #5062
+
+  (Probe Error check, #5070 will be 0 if failed)
+  o110 if [#5070 EQ 0]
+      (back to start point and feed)
+      G90
+      G1 F[#<probe_traverse_fr>] Y#<y>
+      F[#<probe_fast_fr>]
+      M50 P1
+      o<probe_y_plus_wco> return
+  o110 endif
+
+  (Move to xy_clearance distance for slow probe)
+  G90
+  G1 F[#<probe_traverse_fr>] Y[#<y_plus_probed> - #<xy_clearance>]
+
+  (Slow Probe Rule, if Slow Probe FR is set to 0, Slow Probe is Bypassed)
+  o120 if [#<probe_slow_fr> GT 0]
+      (Initiate Slow Y+ Probe)
+      G91
+      F[#<probe_slow_fr>]
+      G38.2 Y[#<xy_clearance> * 2]
+      #<y_plus_probed> = #5062
+      G90
+      G1 F[#<probe_traverse_fr>] Y[#<y_plus_probed> - #<xy_clearance>]
+  o120 endif
+
+  #<y_plus_zero_edge> = [#5062 + #<probe_center_offset>]
+
+  (defines the edge as y_probed_position for DRO reporting)
+  #<y_plus_probed_position> = #<y_plus_zero_edge>
+
+  (output to gui DRO "Y PROBED POSITION")
+  #1008 = #<y_plus_probed_position>
+  (DEBUG, EVAL[vcp.getWidget{"y_plus_probed_position"}.setValue{#1008}])
+
+  (probe mode rule for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+      (Record Y Zero in selected WCO)
+      G10 L2 P#5220 Y[#<y_plus_zero_edge> + #<workspace_y>]
+  o130 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_y_plus_wco> endsub
+
+M2 (end program)

subroutines/probe_z_minus_sub.ngc

@@ -0,0 +1,84 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe Z Minus direction and set Z 0 in current WCO)
+(Start probe position is over stock within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_z_minus_sub> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #1
+  #<probe_slow_fr> = #2
+  #<probe_fast_fr> = #3
+  #<probe_traverse_fr> = #4
+  #<max_z_distance> = #5
+  #<z_clearance> = #6
+  #<probe_mode> = #7
+
+  (Cancel G92 offsets)
+  G92.1
+
+  #<workspace_z> = #[5203 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      o<probe_z_minus_sub> return
+  o100 endif
+
+  (Current Z Position including offsets in current program units)
+  #<z> = #5422
+
+  (Initial Fast Z- Probe)
+  G91
+  F[#<probe_fast_fr>]
+  G38.2 Z-[#<max_z_distance>]
+  #<z_minus_probed> = #5063
+
+  (Probe Error check, #5070 will be 0 if failed)
+  o110 if [#5070 EQ 0]
+      (back to start point and feed)
+      G90
+      G1 F[#<probe_traverse_fr>] Z#<z>
+      F[#<probe_fast_fr>]
+      (return from sub)
+      o<probe_z_minus_sub> return
+  o110 endif
+
+  (Move to z_clearance height for slow probe)
+  G90
+  G1 F[#<probe_traverse_fr>] Z[#<z_minus_probed> + #<z_clearance>]
+
+  (Slow Probe Rule, if Slow Probe FR is set to 0, Slow Probe is Bypassed)
+  o120 if [#<probe_slow_fr> GT 0]
+      (Initiate Slow Z- Probe)
+      G91
+      F[#<probe_slow_fr>]
+      G38.2 Z-[#<z_clearance> * 2]
+      #<z_minus_probed> = #5063
+      G90
+      G1 F[#<probe_traverse_fr>] Z[#<z_minus_probed> + #<z_clearance>]
+  o120 endif
+
+  (defines the edge as z_probed_position for DRO reporting)
+  #<z_minus_probed_position> = #<z_minus_probed>
+
+  (output to gui DRO "Z PROBED POSITION")
+  #1009 = #<z_minus_probed_position>
+  (DEBUG, EVAL[vcp.getWidget{"z_minus_probed_position"}.setValue{#1009}])
+
+  #<z_finish_height> = [#<z_minus_probed> + #<z_clearance>]
+
+  (probe mode rule for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+      (Record Z zero in selected WCO)
+      G10 L2 P#5220 Z[#<z_minus_probed> + #<workspace_z>]
+      o<probe_z_minus_sub> return
+  o130 endif
+
+o<probe_z_minus_sub> endsub [#<z_finish_height>]
+
+M2 (end program)

subroutines/probe_z_minus_wco.ngc

@@ -0,0 +1,91 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(Probe Z Minus direction and set Z 0 in current WCO)
+(Start probe position is over stock within max z distance)
+(ensure all settings have been set properly according to help diagrams)
+
+o<probe_z_minus_wco> sub
+
+  (uses NGCGUI style arg spec)
+  (number after "=" in comment is default value)
+  #<probe_tool_number> = #3014    (=99)
+  #<probe_slow_fr> = #3015        (=0)
+  #<probe_fast_fr> = #3016        (=10.0)
+  #<probe_traverse_fr> = #3017    (=50)
+  #<max_z_distance> = #3020       (=0.5000)
+  #<z_clearance> = #3021          (=0.1000)
+  #<probe_mode> = #3030           (=0)
+
+  (Cancel G92 offsets)
+  G92.1
+
+  (Cancel Feedrate Override)
+  M50 P0
+
+  #<workspace_z> = #[5203 + [20 * #5220]]
+
+  (Probe Tool Safety Check)
+  o100 if [#5400 NE #<probe_tool_number>]
+      (DEBUG, Specified probe tool %d#<probe_tool_number> not in spindle, aborting)
+      M50 P1
+      o<probe_z_minus_wco> return
+  o100 endif
+
+  (Current Z Position including offsets in current program units)
+  #<z> = #5422
+
+  (Initial Fast Z- Probe)
+  G91
+  F[#<probe_fast_fr>]
+  G38.2 Z-[#<max_z_distance>]
+  #<z_minus_probed> = #5063
+
+  (Probe Error check, #5070 will be 0 if failed)
+  o110 if [#5070 EQ 0]
+      (back to start point and feed)
+      G90
+      G1 F[#<probe_traverse_fr>] Z#<z>
+      F[#<probe_fast_fr>]
+      (return from sub)
+      M50 P1
+      o<probe_z_minus_wco> return
+  o110 endif
+
+  (Move to z_clearance height for slow probe)
+  G90
+  G1 F[#<probe_traverse_fr>] Z[#<z_minus_probed> + #<z_clearance>]
+
+  (Slow Probe Rule, if Slow Probe FR is set to 0, Slow Probe is Bypassed)
+  o120 if [#<probe_slow_fr> GT 0]
+      (Initiate Slow Z- Probe)
+      G91
+      F[#<probe_slow_fr>]
+      G38.2 Z-[#<z_clearance> * 2]
+      #<z_minus_probed> = #5063
+      G90
+      G1 F[#<probe_traverse_fr>] Z[#<z_minus_probed> + #<z_clearance>]
+  o120 endif
+
+  (defines the edge as z_probed_position for DRO reporting)
+  #<z_minus_probed_position> = #<z_minus_probed>
+
+  (output to gui DRO "Z PROBED POSITION")
+  #1009 = #<z_minus_probed_position>
+  (DEBUG, EVAL[vcp.getWidget{"z_minus_probed_position"}.setValue{#1009}])
+
+  #<z_finish_height> = [#<z_minus_probed> + #<z_clearance>]
+
+  (probe mode rule for WCO or probe position measuring only)
+  o130 if [#<probe_mode> EQ 0]
+      (Record Z zero in selected WCO)
+      G10 L2 P#5220 Z[#<z_minus_probed> + #<workspace_z>]
+  o130 endif
+
+  (Reinstate Feedrate Override)
+  M50 P1
+
+o<probe_z_minus_wco> endsub
+
+M2 (end program)

subroutines/program_coolant.ngc

@@ -0,0 +1,45 @@
+(author: Chris P)
+(version: 0.3)
+(date: 06/27/24)
+
+(programmable coolant subroutine for aiming the coolant nozzle)
+(settings for setup are displayed on probe basic setting page)
+(in the programmable coolant constants container.)
+(calculations assume coolant nozzle is located on the right side of the spindle)
+
+
+o<program_coolant> sub
+(PRINT, o<program_coolant>)
+
+  #<activate_programmable_coolant> = #3000
+  #<horizontal_spindle_nozzle_dist> = #3001
+  #<vertical_spindle_nozzle_dist> = #3002
+  #<pc_angle_offset> = #3003
+
+  o100 if [#<activate_programmable_coolant> EQ 0]
+    o100 return
+  o100 endif
+
+  #<pc_tool_length> = #5403
+
+  #<tool_diameter> = #5410
+
+  #<tool_radius_offset_dist> = [#<tool_diameter> / 2]
+
+  #<tool_diameter_offset_dist> = [#<horizontal_spindle_nozzle_dist> - #<tool_radius_offset_dist>]
+
+  #<tool_tip_position> = [[#<vertical_spindle_nozzle_dist>] + [#<pc_tool_length>]]
+
+  #<coolant_abs_angle> = [ATAN[#<tool_tip_position>] / [#<tool_diameter_offset_dist>]]
+
+  #<coolant_final_angle> = [[#<coolant_abs_angle>] + [#<pc_angle_offset>]]
+
+  #1000 = #<coolant_final_angle>
+  (DEBUG, EVAL[vcp.getWidget{"coolant_final_angle"}.setValue{#1000}])
+
+  M68 E0 Q[#<coolant_final_angle>]
+
+  (PRINT, o<program_coolant> endsub)
+o<program_coolant> endsub
+
+M2 (end program)

subroutines/rack_id_calc.ngc

@@ -0,0 +1,139 @@
+(author: Chris P, Lcvette)
+(version: 0.1)
+(date: 02/8/25)
+
+(This sub will write user parameters to the var file and ui widgets)
+(Determine ATC Rack Position, Pocket Order, and Clearance Direction)
+(Requires Pockets to be aligned parallel with X or Y Axis Travels)
+
+o<rack_id_calc> sub
+
+  #<rack_traverse_speed_3980> = #1 (0)
+  #<rack_z_load_height_3981> = #2 (0)
+  #<rack_safe_z_height_3982> = #3 (0)
+  #<rack_pocket_1_x_3983> = #4 (0)
+  #<rack_pocket_1_y_3984> = #5 (0)
+  #<rack_pocket_2_x_3985> = #6 (0)
+  #<rack_pocket_2_y_3986> = #7 (0)
+  #<pocket_1_x_clearance_3987> = #8 (0)
+  #<pocket_1_y_clearance_3988> = #9 (0)
+  #<rack_atc_user_1_3974> = #10 (0)
+  #<rack_atc_user_2_3975> = #11 (0)
+  #<rack_atc_user_3_3976> = #12 (0)
+  #<rack_atc_user_4_3977> = #13 (0)
+  #<rack_atc_user_5_3978> = #14 (0)
+
+  #3974 = #<rack_atc_user_1_3974>
+  #3975 = #<rack_atc_user_2_3975>
+  #3976 = #<rack_atc_user_3_3976>
+  #3977 = #<rack_atc_user_4_3977>
+  #3978 = #<rack_atc_user_5_3978>
+  #3980 = #<rack_traverse_speed_3980>
+  #3981 = #<rack_z_load_height_3981>
+  #3982 = #<rack_safe_z_height_3982>
+  #3983 = #<rack_pocket_1_x_3983>
+  #3984 = #<rack_pocket_1_y_3984>
+  #3985 = #<rack_pocket_2_x_3985>
+  #3986 = #<rack_pocket_2_y_3986>
+  #3987 = #<pocket_1_x_clearance_3987>
+  #3988 = #<pocket_1_y_clearance_3988>
+
+  (Initialize ALL variables first)
+  #3979 = 0
+  #<pocket_order> = 0
+  #<clearance_direction> = 0
+  #<rack_id> = 0
+  #<temp> = 0
+
+  (Pull ini pocket count and write to ui)
+  o100 if [EXISTS[#<_ini[atc]pockets>]]
+    #<number_of_pockets> = #<_ini[atc]pockets>
+    #3973 = #<number_of_pockets>
+    (DEBUG, EVAL[vcp.getWidget{"rack_pocket_count"}.setValue{#3973}])
+  o100 endif
+
+  (Check for duplicate pocket positions)
+  o110 if [#<rack_pocket_1_x_3983> EQ #<rack_pocket_2_x_3985>]
+    o111 if [#<rack_pocket_1_y_3984> EQ #<rack_pocket_2_y_3986>]
+      (PRINT, "Error: Duplicate pocket positions detected!")
+      #3979 = 0
+      (DEBUG, EVAL[vcp.getWidget{"atc_rack_id"}.setValue{#3979}])
+      o<rack_id_calc> return
+    o111 endif
+  o110 endif
+
+  (Check if row is parallel to the Y-axis)
+  o120 if [#<rack_pocket_1_x_3983> EQ #<rack_pocket_2_x_3985>]
+    (PRINT, "Row is parallel to Y-axis")
+
+    (Determine pocket order)
+    o121 if [#<rack_pocket_2_y_3986> GT #<rack_pocket_1_y_3984>]
+      #<pocket_order> = 1 (-Y to +Y)
+    o121 else
+      #<pocket_order> = 2 (+Y to -Y)
+    o121 endif
+
+    (Determine clearance direction - MUST be in X)
+    o122 if [#<pocket_1_x_clearance_3987> GT #<rack_pocket_1_x_3983>]
+      #<clearance_direction> = 1 (+X)
+    o122 elseif [#<pocket_1_x_clearance_3987> LT #<rack_pocket_1_x_3983>]
+      #<clearance_direction> = 2 (-X)
+    o122 else
+      (PRINT, "Error: Clearance direction must be perpendicular to pocket row!")
+      #3979 = 0
+      (DEBUG, EVAL[vcp.getWidget{"atc_rack_id"}.setValue{#3979}])
+      o<rack_id_calc> return
+    o122 endif
+
+    (Assign rack_id - break down calculation steps)
+    #<temp> = [#<pocket_order> - 1]
+    #<temp> = [#<temp> * 2]
+    #<temp> = [#<temp> + #<clearance_direction>]
+    #<rack_id> = #<temp>
+    #3979 = #<rack_id>
+    (DEBUG, EVAL[vcp.getWidget{"atc_rack_id"}.setValue{#3979}])
+    o<rack_id_calc> return
+  o120 endif
+
+  (Check if row is parallel to the X-axis)
+  o130 if [#<rack_pocket_1_y_3984> EQ #<rack_pocket_2_y_3986>]
+    (PRINT, "Row is parallel to X-axis")
+
+    (Determine pocket order)
+    o131 if [#<rack_pocket_2_x_3985> GT #<rack_pocket_1_x_3983>]
+      #<pocket_order> = 1 (-X to +X)
+    o131 else
+      #<pocket_order> = 2 (+X to -X)
+    o131 endif
+
+    (Determine clearance direction - MUST be in Y)
+    o132 if [#<pocket_1_y_clearance_3988> GT #<rack_pocket_1_y_3984>]
+      #<clearance_direction> = 1 (+Y)
+    o132 elseif [#<pocket_1_y_clearance_3988> LT #<rack_pocket_1_y_3984>]
+      #<clearance_direction> = 2 (-Y)
+    o132 else
+      (PRINT, "Error: Clearance direction must be perpendicular to pocket row!")
+      #3979 = 0
+      (DEBUG, EVAL[vcp.getWidget{"atc_rack_id"}.setValue{#3979}])
+      o<rack_id_calc> return
+    o132 endif
+    
+    (Assign rack_id - break down calculation steps)
+    #<temp> = [#<pocket_order> - 1]
+    #<temp> = [#<temp> * 2]
+    #<temp> = [#<temp> + #<clearance_direction>]
+    #<temp> = [#<temp> + 4]
+    #<rack_id> = #<temp>
+    #3979 = #<rack_id>
+    (DEBUG, EVAL[vcp.getWidget{"atc_rack_id"}.setValue{#3979}])
+    o<rack_id_calc> return
+    
+  o130 endif
+
+  (MSG, "Error: No Conditions Met, Rack ID Not Set")
+  #3979 = 0
+  (DEBUG, EVAL[vcp.getWidget{"atc_rack_id"}.setValue{#3979}])
+
+o<rack_id_calc> endsub
+
+M2

subroutines/reset_all_data.ngc

@@ -0,0 +1,41 @@
+o<reset_all_data> sub
+
+#1001 = 0
+(DEBUG, EVAL[vcp.getWidget{"x_center_probed"}.setValue{#1001}])
+
+#1002 = 0
+(DEBUG, EVAL[vcp.getWidget{"x_probed_width"}.setValue{#1002}])
+
+#1003 = 0
+(DEBUG, EVAL[vcp.getWidget{"y_center_probed"}.setValue{#1003}])
+
+#1004 = 0
+(DEBUG, EVAL[vcp.getWidget{"y_probed_width"}.setValue{#1004}])
+
+#1005 = 0
+(DEBUG, EVAL[vcp.getWidget{"x_minus_probed_position"}.setValue{#1005}])
+
+#1006 = 0
+(DEBUG, EVAL[vcp.getWidget{"x_plus_probed_position"}.setValue{#1006}])
+
+#1007 = 0
+(DEBUG, EVAL[vcp.getWidget{"y_minus_probed_position"}.setValue{#1007}])
+
+#1008 = 0
+(DEBUG, EVAL[vcp.getWidget{"y_plus_probed_position"}.setValue{#1008}])
+
+#1009 = 0
+(DEBUG, EVAL[vcp.getWidget{"z_minus_probed_position"}.setValue{#1009}])
+
+#1010 = 0
+(DEBUG, EVAL[vcp.getWidget{"averaged_diam"}.setValue{#1010}])
+
+#1011 = 0
+(DEBUG, EVAL[vcp.getWidget{"edge_delta"}.setValue{#1011}])
+
+#1012 = 0
+(DEBUG, EVAL[vcp.getWidget{"edge_angle"}.setValue{#1012}])
+
+o<reset_all_data> endsub
+
+M2 (end program)

subroutines/retractatc.ngc

@@ -0,0 +1,15 @@
+o<retractatc> sub
+
+M65 P0 ; Turn off carousel out solenoid
+M64 P1 ; Move Carousel IN
+
+M66 P0 L3 Q5 ; check carousel in position sensor
+o100 if [#5399 LT 0]
+    M65 P1 ; turn off the solenoid to send atc home
+    (abort, Failed to send carousel home) ; abort if the sensor does not activate in 5 seconds
+o100 endif
+M65 P1
+
+o<retractatc> endsub [1]
+
+M2

subroutines/set_g30_position.ngc

@@ -0,0 +1,19 @@
+o<set_g30_position> sub
+
+o100 if [1 EQ 1]
+    (G30.1 records the tool touch off position in the var file)
+    G30.1
+o100 endif
+
+#1000 = #5181
+(DEBUG, EVAL[vcp.getWidget{"x_tool_change_position"}.setValue{#1000}])
+
+#1001 = #5182
+(DEBUG, EVAL[vcp.getWidget{"y_tool_change_position"}.setValue{#1001}])
+
+#1002 = #5183
+(DEBUG, EVAL[vcp.getWidget{"z_tool_change_position"}.setValue{#1002}])
+
+o<set_g30_position> endsub
+
+M2

subroutines/store_tool_in_carousel.ngc

@@ -0,0 +1,16 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+(store spindle tool in carousel macro)
+
+o<store_tool_in_carousel> sub
+(PRINT, o<store_tool_in_carousel>)
+
+G49
+
+T0 M6
+
+o<store_tool_in_carousel> endsub
+
+M2 (end program)

subroutines/surface_scan_param_update.ngc

@@ -0,0 +1,21 @@
+o<surface_scan_param_update> sub
+
+  #<surface_scan_x0_3050> = #1
+  #<surface_scan_y0_3051> = #2
+  #<surface_scan_height_3052> = #3
+  #<surface_scan_width_3053> = #4
+  #<surface_scan_step_3054> = #5
+  
+  #3050 = #<surface_scan_x0_3050>  
+  
+  #3051 = #<surface_scan_y0_3051>  
+  
+  #3052 = #<surface_scan_height_3052>  
+  
+  #3053 = #<surface_scan_width_3053>  
+  
+  #3054 = #<surface_scan_step_3054>
+
+o<surface_scan_param_update> endsub [1]
+
+M2

subroutines/surface_test.ngc

@@ -0,0 +1,44 @@
+o<surface_test> sub
+  ;(MSG, SURFACE_TEST.NGC)
+  M64 P0  (turn off compensation)
+  ;T1 M6 (Install probe)
+  #<x0> = #3050 ;(debug, x0: [#<x0>])
+  #<y0> = #3051 ;(debug, y0: [#<y0>])
+  #<height> = #3052 ;(debug, height: [#<height>])
+  #<width> = #3053 ;(debug, width: [#<width>])
+  #<step> = #3054 ;(debug, step: [#<step>])
+  #<search_feed> = #3055 ;(debug, search_feed: [#<search_feed>])
+  #<latch_feed> = #3056 ;(debug, latch_feed: [#<latch_feed>])
+  #<safe_z> = #3057 ;(debug, safe_z: [#<safe_z>])
+  #<search_z> = #3058 ;(debug, search_z: [#<search_z>])
+           
+  ;(PROBEOPEN filename.txt)
+
+  G0 Z#<safe_z>
+  #<y> = #<y0>
+  o101 while [#<y> LT #<height>+#<y0>]
+    #<x> = #<x0>
+    o102 while [#<x> LE #<width>+#<x0>]
+     G0 X#<x> Y#<y>
+      G38.2 Z#<search_z> F#<search_feed>
+      G0 Z#<safe_z>
+      #<x> = [#<x>+#<step>]
+    o102 endwhile
+    
+    #<y> = [#<y>+#<step>]
+    #<x> = [#<x0>+#<width>]
+    
+    o103 while [#<x> GE #<x0>]
+     G0 X#<x> Y#<y>
+      G38.2 Z#<search_z> F#<search_feed>
+      G0 Z#<safe_z>
+      #<x> = [#<x>-#<step>]
+    o103 endwhile
+    
+    #<y> = [#<y>+#<step>]
+  o101 endwhile
+
+  ;(PROBECLOSE)
+o<surface_test> endsub
+
+M2

subroutines/tool_setter_param_update.ngc

@@ -0,0 +1,45 @@
+o<tool_setter_param_update> sub
+
+  #<fast_probe_fr_3004> = #1
+  #<slow_probe_fr_3005> = #2
+  #<traverse_fr_3006> = #3
+  #<z_max_travel_3007> = #4
+  #<xy_max_travel_3008> = #5
+  #<retract_distance_3009> = #6
+  #<spindle_zero_height_3010> = #7
+  #<tool_diameter_probe_mode_3011> = #8
+  #<tool_diameter_offset_mode_3012> = #9
+  #<tool_setter_offset_direction_3013> = #10
+  #<breakage_tolerance_3037> = #11
+  #<user_setter_1_3038> = #12
+  #<user_setter_2_3039> = #13
+
+  #3004 = #<fast_probe_fr_3004>
+
+  #3005 = #<slow_probe_fr_3005>
+
+  #3006 = #<traverse_fr_3006>
+
+  #3007 = #<z_max_travel_3007>
+
+  #3008 = #<xy_max_travel_3008>
+
+  #3009 = #<retract_distance_3009>
+
+  #3010 = #<spindle_zero_height_3010>
+
+  #3011 = #<tool_diameter_probe_mode_3011>
+
+  #3012 = #<tool_diameter_offset_mode_3012>
+
+  #3013 = #<tool_setter_offset_direction_3013>
+
+  #3037 = #<breakage_tolerance_3037>
+
+  #3038 = #<user_setter_1_3038>
+
+  #3039 = #<user_setter_2_3039>
+
+o<tool_setter_param_update> endsub [1]
+
+M2

subroutines/tool_touch_off.ngc

@@ -0,0 +1,101 @@
+(author: Chris P, TooTall18)
+(version: 0.2)
+(date: 06/27/24)
+
+o<tool_touch_off> sub
+
+#<fast_probe_fr> = #3004    (set from probe screen fast probe feed rate)
+#<slow_probe_fr> = #3005    (set from probe screen slow probe feedrate)
+#<traverse_fr> = #3006    (set from probe screen traverse probe feedrate)
+#<z_max_travel> = #3007    (max z distance the tool travels before erroring out if not contact is made)
+#<xy_max_travel> = #3008    (max xy distance the tool travels before erroring out if not contact is made)
+#<retract_distance> = #3009    (distance the tool retracts after making contact during fast feed mode)
+#<spindle_zero_height> = #3010    (G53 distance from home to spindle nose triggering point on touch plate)
+#<tool_diameter_probe_mode> = #3011    (activates the tool diameter probe subroutine section)
+#<tool_diameter_offset_mode> = #3012    (activates the tool diameter offset position for probe subroutine section)
+#<tool_setter_offset_direction> = #3013    (sets tool setter offset direction to move tool)
+#<tool_diameter> = #5410    (current tool's diameter used for offseting probe position in x axis)
+
+G92.1    (Cancel G92 offset)
+M50 P0
+
+#<tool_touch_x_coords> = #5181
+#<tool_touch_y_coords> = #5182
+#<tool_touch_z_coords> = #5183
+
+#<tool_radius_offset> = [#<tool_diameter> / 2]
+#<left_offset_probing_position> = [#<tool_touch_x_coords> - #<tool_radius_offset>]
+#<right_offset_probing_position> = [#<tool_touch_x_coords> + #<tool_radius_offset>]
+#<front_offset_probing_position> = [#<tool_touch_y_coords> - #<tool_radius_offset>]
+#<back_offset_probing_position> = [#<tool_touch_y_coords> + #<tool_radius_offset>]
+
+o100 if [#<tool_diameter_offset_mode> EQ 1]
+    o101 if [#<tool_setter_offset_direction> EQ 0]
+        #<tool_touch_x_coords> = #<left_offset_probing_position>
+    o101 else if [#<tool_setter_offset_direction> EQ 1]
+        #<tool_touch_x_coords> = #<right_offset_probing_position>
+    o101 else if [#<tool_setter_offset_direction> EQ 2]
+        #<tool_touch_y_coords> = #<front_offset_probing_position>
+    o101 else if [#<tool_setter_offset_direction> EQ 3]
+        #<tool_touch_y_coords> = #<back_offset_probing_position>
+    o101 endif
+o100 endif
+
+o110 if [2 EQ 2]
+    G49
+o110 endif
+
+G90    (set absolute coordinates)
+G53 G1 F[#<traverse_fr>] Z0    (move to z0 home position)
+G53 G1 F[#<traverse_fr>] X#<tool_touch_x_coords> Y#<tool_touch_y_coords>
+G53 G1 F[#<traverse_fr>] Z#<tool_touch_z_coords>
+
+#<offset_z> = #5422         ;Stores the offset of the current Z coordinate.
+
+G91
+F #<fast_probe_fr>
+G38.2 Z-[#<z_max_travel>]    (fast tool probe)
+#<z_fast_probe> = #5063    (save probe result of fast probe to parameters)
+G1 F[#<traverse_fr>] Z[#<retract_distance>]    (retract tool retract distance amount)
+
+(Slow Probe Rule, if Slow Probe FR is set to 0, Slow Probe is Bypassed)
+o120 if [#<slow_probe_fr> GT 0]
+    (Initiate Slow Z- Probe)
+    G91
+    F[#<slow_probe_fr>]    (set probe slow feedrate)
+    G38.2 Z-[#<retract_distance> * 2]    (slow tool probe)
+    #<z_slow_probe> = #5063
+    G90
+    G1 F[#<traverse_fr>] Z[#<z_slow_probe> + #<retract_distance>]
+o120 endif
+
+o130 if [#5070 EQ 1]    (verify probe event was succesful)
+    #<z_slow_probe> = #5063    (save slow probe result to parameters)
+o130 else
+    (DEBUG,Tool Length Offset Probe Failed)
+o130 endif
+
+(Tool Diameter Probe Mode Section, User must define this section as needed)
+o140 if [#<tool_diameter_probe_mode> EQ 1]
+    (DEBUG, Tool Diameter Probing is Not Defined in Subroutine)
+o140 endif
+
+o150 if [3 EQ 3]
+    G49
+o150 endif
+
+G90    (set absolute coordinates)
+G53 G1 F[#<traverse_fr>] Z0 (Send Spindle to home zero position)
+
+(define new tool length offset parameters)
+#<new_tool_length_offset> = [ABS[#<spindle_zero_height> + #5063 - #<offset_z>]]
+
+G10 L1 P #5400 Z [#<new_tool_length_offset>]  (5400 = tool number)
+
+T #5400 G43  H #5400    (enable tool length offset)
+
+M50 P1  (reinstate feedrate override)
+
+o<tool_touch_off> endsub
+
+M2 (end program)

subroutines/toolchange.ngc

@@ -0,0 +1,137 @@
+(author: Chris P)
+(version: 0.2)
+(date: 06/27/24)
+
+o<toolchange> sub
+
+; Parameter #3989 is used to track if the carousel is homed (M13) (volatile)
+; Parameter #3990 is used to track the current tool pocket (persistently)
+; Parameter #3991 is used to track the current tool loaded it in the spindle (persistently)
+; Parameters #4001 to #4024 are used to track which tool is in which pocket (persistently)
+; Parameter #4000 is not populated just used in the maths to calculate the above numbers
+; #<number_of_pockets>: The number of pockets the ATC platter has, This is user set in the INI file via #<_ini[atc]pockets>
+; #<atc_z_tool_change_height> The Z height your spindle needs to be at to clamp/unclamp a tool from the ATC platter (Set via INI [ATC]Z_TOOL_CHANGE_HEIGHT)
+; #<atc_z_tool_clearance_height> The Z clearance height in machine coordinates that your spindle needs to be at to clear the tools during carousel rotation (Set via INI [ATC]Z_TOOL_CLEARANCE_HEIGHT)
+
+(PRINT, o<toolchange> selected_tool: #<selected_tool>, tool_in_spindle: #<tool_in_spindle>, selected_pocket: #<selected_pocket>, current_pocket: #<current_pocket>, task: #<_task>)
+
+o100 if [#<_task> EQ 0]
+    (DEBUG, Task is null)
+    o<toolchange> return [999]
+o100 endif (this code eliminates tool missing error on load for multiple use tools)
+
+; default to a 12 pocket ATC (matching DynATC Widget behaviour), then update based on INI settings
+#<number_of_pockets> = 12
+o110 if [EXISTS[#<_ini[atc]pockets>]]
+    #<number_of_pockets> = #<_ini[atc]pockets>
+o110 endif
+
+#<atc_z_tool_change_height> = -3.9000
+o120 if [EXISTS[#<_ini[atc]z_tool_change_height>]]
+    #<atc_z_tool_change_height> = #<_ini[atc]z_tool_change_height>
+o120 endif
+#<atc_z_tool_clearance_height> = [#<_ini[AXIS_Z]MAX_LIMIT>-0.01]
+o130 if [EXISTS[#<_ini[atc]z_tool_clearance_height>]]
+    #<atc_z_tool_clearance_height> = #<_ini[atc]z_tool_clearance_height>
+o130 endif
+
+; assign the variables passed by M6 change_prolog to some parameters
+#100 = #<selected_tool>
+#110 = #<tool_in_spindle>
+#120 = #<selected_pocket>
+#121 = #<current_pocket>
+; NOTE:
+;      The legacy names *selected_pocket* and *current_pocket* actually reference
+;      a sequential tooldata index for tool items loaded from a tool
+;      table ([EMCIO]TOOL_TABLE) or via a tooldata database ([EMCIO]DB_PROGRAM)
+;      see Linuxcnc docs for further information on how these are used
+
+o140 if [#<selected_tool> EQ #<tool_in_spindle>] ; checks if tool in the spindle is same as requested
+    (PRINT, Requested tool already in spindle)
+    (PRINT, o<toolchange> endsub)
+    o<toolchange> endsub [1]
+    M2
+o140 endif
+
+o150 if [#3991 NE #<tool_in_spindle>]
+    (PRINT, o<toolchange> tool_in_spindle does not match 3991)
+o150 endif
+
+#<next_pocket> = 0 ; assigns 0 to the next pocket for a later check if the tool is found in the carousel
+#<open_pocket> = 0
+#130 = #<number_of_pockets> ; assign test parameter the number of pockets in the carousel
+
+o160 do
+    o161 if [#[4000 + #130] EQ #<selected_tool>] ; checks all pockets to see if it contains tool number requested as the new tool
+        #<next_pocket> = #130 ; if tool is found in pocket, assigns the next pocket
+    o161 endif
+    o162 if [#[4000 + #130] EQ 0] ; checks if the pocket is empty, last pocket checked will be the lowest empty pocket number, for putting tool in spindle away.
+        #<open_pocket> = #130
+    o162 endif
+    #130 = [#130 - 1]
+o160 while [#130 GT 0]
+o170 if [#<next_pocket> EQ 0] ; if tool is not found, aborts and sends a message
+    (abort, Tool T%d#<selected_tool> not found in carousel)
+o170 endif
+
+; now we know which pocket the next tool is sitting in
+; we need to know if we need to put a tool away
+; or if there is not tool in the spindle
+
+o180 if [#<tool_in_spindle> GT 0] ; checks if there is a valid tool in the spindle
+    o181 if [#<open_pocket> EQ 0] ; If there is a tool in the spindle, checks if there is an open pocket
+        (abort, Carousel is full, cant put away tool T#<tool_in_spindle> in into carousel)
+    o181 endif
+    M10 P[#<open_pocket>] ; move carousel to an open pocket
+    M21 ; puts the tool in spindle away into the open pocket
+    (DEBUG, EVAL[vcp.getWidget{"dynatc"}.store_tool{#<open_pocket>, #<tool_in_spindle>}])
+    #140 = #<open_pocket>
+    #[4000 + #140] = #<tool_in_spindle> ; save tool number in pocket
+    #3991 = 0 ; empty tool in the spindle
+    M61 Q0
+    G49
+o180 endif
+
+G90
+G0 G53 Z#<atc_z_tool_clearance_height> ; move z to clear height
+
+o190 if [#<selected_tool> GT 0] ; selected tool is not tool0
+    M10 P#<next_pocket> ; set the carousel to move to the right pocket for the selected tool
+    M65 P1
+    M64 P0
+    M66 P1 L3 Q5 ; check carousel out position sensor
+    o191 if [#5399 LT 0]
+        M65 P0 ; turn off the solenoid to send atc to tool change
+        (abort, Failed to send carousel home) ; abort if the sensor does not activate in 5 seconds
+    o191 endif
+    M65 P0
+
+    (DEBUG, EVAL[vcp.getWidget{"dynatc"}.store_tool{#<next_pocket>, 0}])
+    M22 ; Carousel out
+    #150 = #<next_pocket>
+    #[4000 + #150] = 0 ; empty the pocket
+    #3991 = #<selected_tool> ; Set persistent variable to remember tool in spindle after power cycle
+o190 else
+    M65 P2 ; deactive drawbar
+    M65 P0 ; make sure ATC out solenoid is off
+    M64 P1 ; move carousel home
+    M66 P0 L3 Q4 ; check carousel in position sensor
+    o192 if [#5399 LT 0]
+        M65 P1 ; turn off the solenoid to send atc home
+        (abort, Failed to send carousel home) ; abort if the sensor does not activate in 5 seconds
+    o192 endif
+    M65 P1
+o190 endif
+
+M61 Q#<selected_tool>
+
+o200 if [1 EQ 1]
+    G43 H#<selected_tool>
+o200 endif
+
+o<program_coolant> call
+
+(PRINT, o<toolchange> endsub)
+o<toolchange> endsub [1]
+
+M2