dodalem pliki z machine_setup_files

subroutines/program_coolant.ngc

@@ -0,0 +1,45 @@
+(author: Chris P)
+(version: 0.3)
+(date: 06/27/24)
+
+(programmable coolant subroutine for aiming the coolant nozzle)
+(settings for setup are displayed on probe basic setting page)
+(in the programmable coolant constants container.)
+(calculations assume coolant nozzle is located on the right side of the spindle)
+
+
+o<program_coolant> sub
+(PRINT, o<program_coolant>)
+
+  #<activate_programmable_coolant> = #3000
+  #<horizontal_spindle_nozzle_dist> = #3001
+  #<vertical_spindle_nozzle_dist> = #3002
+  #<pc_angle_offset> = #3003
+
+  o100 if [#<activate_programmable_coolant> EQ 0]
+    o100 return
+  o100 endif
+
+  #<pc_tool_length> = #5403
+
+  #<tool_diameter> = #5410
+
+  #<tool_radius_offset_dist> = [#<tool_diameter> / 2]
+
+  #<tool_diameter_offset_dist> = [#<horizontal_spindle_nozzle_dist> - #<tool_radius_offset_dist>]
+
+  #<tool_tip_position> = [[#<vertical_spindle_nozzle_dist>] + [#<pc_tool_length>]]
+
+  #<coolant_abs_angle> = [ATAN[#<tool_tip_position>] / [#<tool_diameter_offset_dist>]]
+
+  #<coolant_final_angle> = [[#<coolant_abs_angle>] + [#<pc_angle_offset>]]
+
+  #1000 = #<coolant_final_angle>
+  (DEBUG, EVAL[vcp.getWidget{"coolant_final_angle"}.setValue{#1000}])
+
+  M68 E0 Q[#<coolant_final_angle>]
+
+  (PRINT, o<program_coolant> endsub)
+o<program_coolant> endsub
+
+M2 (end program)