bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 545 -c 2 /dev/ttyUSB0 -v debug enabled Set device=/dev/ttyUSB0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 545, count = 2 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 1... Ctrl-C to stop) [01][03][02][20][00][02][C4][79] Waiting for a confirmation... <01><03><04><00><00><00><64> [545]: 0 [546]: 100 -- Polling slave 1... Ctrl-C to stop) [01][03][02][20][00][02][C4][79] Waiting for a confirmation... <01><03><04><00><00><00><64> [545]: 0 [546]: 100 -- Polling slave 1... Ctrl-C to stop) [01][03][02][20][00][02][C4][79] Waiting for a confirmation... ERROR Connection timed out: select Read output (holding) register failed: Connection timed out -- Polling slave 1... Ctrl-C to stop) [01][03][02][20][00][02][C4][79] Waiting for a confirmation... <01><03><04><00><00><00><64> [545]: 0 [546]: 100 -- Polling slave 1... Ctrl-C to stop) [01][03][02][20][00][02][C4][79] Waiting for a confirmation... <01><03><04><00><00><00><64> [545]: 0 [546]: 100 -- Polling slave 1... Ctrl-C to stop) [01][03][02][20][00][02][C4][79] Waiting for a confirmation... <01><03><04><00><00><00><64> [545]: 0 [546]: 100 -- Polling slave 1... Ctrl-C to stop) [01][03][02][20][00][02][C4][79] Waiting for a confirmation... <01><03><04><00><00><00><64> [545]: 0 [546]: 100 -- Polling slave 1... Ctrl-C to stop) [01][03][02][20][00][02][C4][79] Waiting for a confirmation... <01><03><04><00><00><00><64> [545]: 0 [546]: 100 -- Polling slave 1... Ctrl-C to stop) [01][03][02][20][00][02][C4][79] Waiting for a confirmation... ^C--- /dev/ttyUSB0 poll statistics --- 9 frames transmitted, 7 received, 1 errors, 22.2% frame loss everything was closed. Have a nice day ! bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4:int -r 514 /dev/ttyUSB0 100 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=100 Int[0]=100 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 514, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 32-bit integer (little endian), output (holding) register table [01][10][02][01][00][02][04][00][64][00][00][6A][DC] Waiting for a confirmation... <01><0A><02><01><00> ERROR CRC received 0x1 != CRC calculated 0x61A7 Write output (holding) register failed: Invalid CRC bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 514 /dev/ttyUSB0 100 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=100 Word[0]=0x64 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 514, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][01][00][64][D8][59] Waiting for a confirmation... <01><06><02><01><00><64><59> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 529 -c 1 /dev/ttyUSB0 -v debug enabled Set device=/dev/ttyUSB0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 529, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 ^C--- /dev/ttyUSB0 poll statistics --- 3 frames transmitted, 3 received, 0 errors, 0.0% frame loss everything was closed. Have a nice day ! bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 529 -c 1 /dev/ttyUSB0 -v debug enabled Set device=/dev/ttyUSB0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 529, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><09><78><42> [529]: 9 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><09><78><42> [529]: 9 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><09><78><42> [529]: 9 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><09><78><42> [529]: 9 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><09><78><42> [529]: 9 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 ^C--- /dev/ttyUSB0 poll statistics --- 12 frames transmitted, 12 received, 0 errors, 0.0% frame loss everything was closed. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 514 /dev/ttyUSB0 125 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=125 Word[0]=0x7D mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 514, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][01][00][7D][19][93] Waiting for a confirmation... ERROR Connection timed out: select Write output (holding) register failed: Connection timed out bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 514 /dev/ttyUSB0 125 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=125 Word[0]=0x7D mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 514, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][01][00][7D][19][93] Waiting for a confirmation... ERROR Connection timed out: select Write output (holding) register failed: Connection timed out bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 545 -c 1 /dev/ttyUSB0 -v debug enabled Set device=/dev/ttyUSB0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 545, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 1... Ctrl-C to stop) [01][03][02][20][00][01][84][78] Waiting for a confirmation... <01><03><02><00><00><44> [545]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][20][00][01][84][78] Waiting for a confirmation... <01><03><02><00><00><44> [545]: 0 ^C--- /dev/ttyUSB0 poll statistics --- 2 frames transmitted, 2 received, 0 errors, 0.0% frame loss everything was closed. Have a nice day ! bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 546 -c 1 /dev/ttyUSB0 -v debug enabled Set device=/dev/ttyUSB0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 546, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 1... Ctrl-C to stop) [01][03][02][21][00][01][D5][B8] Waiting for a confirmation... <01><03><02><00><64> [546]: 100 -- Polling slave 1... Ctrl-C to stop) [01][03][02][21][00][01][D5][B8] Waiting for a confirmation... <01><03><02><00><64> [546]: 100 ^C--- /dev/ttyUSB0 poll statistics --- 2 frames transmitted, 2 received, 0 errors, 0.0% frame loss everything was closed. Have a nice day ! bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4:int -r 514 /dev/ttyUSB0 1000 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 514, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 32-bit integer (little endian), output (holding) register table Write output (holding) register failed: Invalid CRC bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 546 -c 1 /dev/ttyUSB0 -v debug enabled Set device=/dev/ttyUSB0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 546, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 1... Ctrl-C to stop) [01][03][02][21][00][01][D5][B8] Waiting for a confirmation... <01><03><02><03> [546]: 1000 -- Polling slave 1... Ctrl-C to stop) [01][03][02][21][00][01][D5][B8] Waiting for a confirmation... <01><83><02><03> ERROR CRC received 0xE803 != CRC calculated 0xF1C0 Read output (holding) register failed: Invalid CRC -- Polling slave 1... Ctrl-C to stop) [01][03][02][21][00][01][D5][B8] Waiting for a confirmation... <01><03><02> ERROR CRC received 0x203 != CRC calculated 0x8572 Read output (holding) register failed: Invalid CRC -- Polling slave 1... Ctrl-C to stop) [01][03][02][21][00][01][D5][B8] Waiting for a confirmation... <03><01> ERROR CRC received 0x1FA != CRC calculated 0xB2CF Read output (holding) register failed: Invalid CRC -- Polling slave 1... Ctrl-C to stop) [01][03][02][21][00][01][D5][B8] Waiting for a confirmation... <03><02><03><01><03> ERROR CRC received 0x301 != CRC calculated 0xDB0B Read output (holding) register failed: Invalid CRC ^C--- /dev/ttyUSB0 poll statistics --- 5 frames transmitted, 1 received, 4 errors, 80.0% frame loss everything was closed. Have a nice day ! bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 514 /dev/ttyUSB0 100 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 514, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 514 /dev/ttyUSB0 100 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=100 Word[0]=0x64 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 514, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][01][00][64][D8][59] Waiting for a confirmation... <01><06><02><01><00><64><59> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 514 /dev/ttyUSB0 125 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=125 Word[0]=0x7D mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 514, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][01][00][7D][19][93] Waiting for a confirmation... <01><06><02><01><00><7D><19><93> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 546 -c 1 /dev/ttyUSB0 -v debug enabled Set device=/dev/ttyUSB0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 546, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 1... Ctrl-C to stop) [01][03][02][21][00][01][D5][B8] Waiting for a confirmation... <01><03><02><00><7D><78><65> [546]: 125 -- Polling slave 1... Ctrl-C to stop) [01][03][02][21][00][01][D5][B8] Waiting for a confirmation... <01><03><02><00><7D><78><65> [546]: 125 ^C--- /dev/ttyUSB0 poll statistics --- 2 frames transmitted, 2 received, 0 errors, 0.0% frame loss everything was closed. Have a nice day ! bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 1 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=1 Word[0]=0x1 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][01][49][B2] Waiting for a confirmation... <01><06><02><00><00><01><49> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 0 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=0 Word[0]=0x0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][00][88][72] Waiting for a confirmation... <01><06><02><00><00><00><88><72> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 3 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=3 Word[0]=0x3 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][03][C8][73] Waiting for a confirmation... <01><06><02><00><00><03><73> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 0 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=0 Word[0]=0x0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][00][88][72] Waiting for a confirmation... ERROR Connection timed out: select Write output (holding) register failed: Connection timed out bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 0 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=0 Word[0]=0x0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][00][88][72] Waiting for a confirmation... <01><06><02><00><00><00><88><72> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 2 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=2 Word[0]=0x2 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][02][09][B3] Waiting for a confirmation... <01><06><02><00><00><02><09> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 0 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=0 Word[0]=0x0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][00][88][72] Waiting for a confirmation... <01><06><02><00><00><00><88><72> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 529 -c 1 /dev/ttyUSB0 -v debug enabled Set device=/dev/ttyUSB0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 529, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 ^C--- /dev/ttyUSB0 poll statistics --- 2 frames transmitted, 2 received, 0 errors, 0.0% frame loss everything was closed. Have a nice day ! bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 2 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=2 Word[0]=0x2 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][02][09][B3] Waiting for a confirmation... <01><06><02><00><00><02><09> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 529 -c 1 /dev/ttyUSB0 -v debug enabled Set device=/dev/ttyUSB0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 529, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><09><78><42> [529]: 9 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><09><78><42> [529]: 9 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><09><78><42> [529]: 9 ^C--- /dev/ttyUSB0 poll statistics --- 3 frames transmitted, 3 received, 0 errors, 0.0% frame loss everything was closed. Have a nice day ! bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 0 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=0 Word[0]=0x0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][00][88][72] Waiting for a confirmation... <01><06><02><00><00><00><88><72> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 529 -c 1 /dev/ttyUSB0 -v debug enabled Set device=/dev/ttyUSB0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 529, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 ^C--- /dev/ttyUSB0 poll statistics --- 3 frames transmitted, 3 received, 0 errors, 0.0% frame loss everything was closed. Have a nice day ! bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 4 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=4 Word[0]=0x4 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][04][89][B1] Waiting for a confirmation... ERROR Connection timed out: select Write output (holding) register failed: Connection timed out bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 4 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=4 Word[0]=0x4 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][04][89][B1] Waiting for a confirmation... <01><06><02><00><00><04><89> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 529 -c 1 /dev/ttyUSB0 -v debug enabled Set device=/dev/ttyUSB0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 529, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... ERROR Connection timed out: select Read output (holding) register failed: Connection timed out -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><0D><79><81> [529]: 13 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><0D><79><81> [529]: 13 ^C--- /dev/ttyUSB0 poll statistics --- 3 frames transmitted, 2 received, 1 errors, 33.3% frame loss everything was closed. Have a nice day ! bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 0 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=0 Word[0]=0x0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][00][88][72] Waiting for a confirmation... ERROR Connection timed out: select Write output (holding) register failed: Connection timed out bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 0 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=0 Word[0]=0x0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][00][88][72] Waiting for a confirmation... <01><06><02><00><00><00><88><72> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 1 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=1 Word[0]=0x1 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][01][49][B2] Waiting for a confirmation... <01><06><02><00><00><01><49> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 529 -c 1 /dev/ttyUSB0 -v debug enabled Set device=/dev/ttyUSB0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 529, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><0D><79><81> [529]: 13 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><0D><79><81> [529]: 13 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><0D><79><81> [529]: 13 ^C--- /dev/ttyUSB0 poll statistics --- 3 frames transmitted, 3 received, 0 errors, 0.0% frame loss everything was closed. Have a nice day ! bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 0 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=0 Word[0]=0x0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][00][88][72] Waiting for a confirmation... <01><06><02><00><00><00><88><70> ERROR CRC received 0x7088 != CRC calculated 0x7288 Write output (holding) register failed: Invalid CRC bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 529 -c 1 /dev/ttyUSB0 -v debug enabled Set device=/dev/ttyUSB0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 529, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><04><87> [529]: 4 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><04><87> [529]: 4 ^C--- /dev/ttyUSB0 poll statistics --- 2 frames transmitted, 2 received, 0 errors, 0.0% frame loss everything was closed. Have a nice day ! bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 529 -c 1 /dev/ttyUSB0 -v debug enabled Set device=/dev/ttyUSB0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 529, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><04><87> [529]: 4 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><04><87> [529]: 4 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><04><87> [529]: 4 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><04><87> [529]: 4 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><04><87> [529]: 4 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><04><87> [529]: 4 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><04><87> [529]: 4 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><04><87> [529]: 4 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><04><87> [529]: 4 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><04><87> [529]: 4 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 -- Polling slave 1... Ctrl-C to stop) [01][03][02][10][00][01][84][77] Waiting for a confirmation... <01><03><02><00><00><44> [529]: 0 ^C--- /dev/ttyUSB0 poll statistics --- 16 frames transmitted, 16 received, 0 errors, 0.0% frame loss everything was closed. Have a nice day ! bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 2 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=2 Word[0]=0x2 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][02][09][B3] Waiting for a confirmation... <01><06><02><00><00><02><09> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 8 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=8 Word[0]=0x8 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][08][89][B4] Waiting for a confirmation... ERROR Connection timed out: select Write output (holding) register failed: Connection timed out bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 8 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=8 Word[0]=0x8 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][08][89][B4] Waiting for a confirmation... <01><06><02><00><00><08><89> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 16 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=16 Word[0]=0x10 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][10][89][BE] Waiting for a confirmation... <01><06><02><00><00><10><89> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 16 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=16 Word[0]=0x10 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][10][89][BE] Waiting for a confirmation... <01><06><02><00><00><10><89> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 0 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=0 Word[0]=0x0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][00][88][72] Waiting for a confirmation... <01><06><02><00><00><00><88><72> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 16 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=16 Word[0]=0x10 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][10][89][BE] Waiting for a confirmation... <01><06><02><00><00><10><89> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 16 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=16 Word[0]=0x10 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][10][89][BE] Waiting for a confirmation... <01><06><02><00><00><10><89> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 16 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=16 Word[0]=0x10 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][10][89][BE] Waiting for a confirmation... <01><06><02><00><00><10><89> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 0 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=0 Word[0]=0x0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][00][88][72] Waiting for a confirmation... <01><06><02><00><00><00><88><72> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 16 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=16 Word[0]=0x10 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][10][89][BE] Waiting for a confirmation... <01><06><02><00><00><10><89> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 0 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=0 Word[0]=0x0 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][00][88][72] Waiting for a confirmation... <01><06><02><00><00><00><88><72> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 16 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=16 Word[0]=0x10 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][10][89][BE] Waiting for a confirmation... <01><06><02><00><00><10><89> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 4 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=4 Word[0]=0x4 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][04][89][B1] Waiting for a confirmation... <01><06><02><00><00><04><89> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 8 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=8 Word[0]=0x8 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][08][89][B4] Waiting for a confirmation... <01><06><02><00><00><08><88> ERROR CRC received 0xB488 != CRC calculated 0xB489 Write output (holding) register failed: Invalid CRC bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 2 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=2 Word[0]=0x2 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][02][09][B3] Waiting for a confirmation... <01><06><02><00><00><02><09> Written 1 references. bartool@debian:~/Public/qmod/qModMaster-code-0.5.2-3$ mbpoll -m rtu -a 1 -b 9600 -P none -t 4 -r 513 /dev/ttyUSB0 8 -v debug enabled Set device=/dev/ttyUSB0 1 write data have been found Set data=8 Word[0]=0x8 mbpoll 1.0-0 - ModBus(R) Master Simulator Copyright (c) 2015-2023 Pascal JEAN, https://github.com/epsilonrt/mbpoll This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; type 'mbpoll -w' for details. Opening /dev/ttyUSB0 at 9600 bauds (N, 8, 1) Set response timeout to 1 sec, 0 us Protocol configuration: ModBus RTU Slave configuration...: address = [1] start reference = 513, count = 1 Communication.........: /dev/ttyUSB0, 9600-8N1 t/o 1.00 s, poll rate 1000 ms Data type.............: 16-bit register, output (holding) register table [01][06][02][00][00][08][89][B4] Waiting for a confirmation... <01><06><02><00><00><08><89> Written 1 references.