bartool/klipper_backup
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

New backup from 12/28/2024 - 10:03:45 AM

Browse Source
This commit is contained in:
klipper-bakckup
2024-12-28 10:03:45 +01:00
commit 0369d6bcdb
6 changed files with 454 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
.gitignore vendored Normal file
View File

@@ -0,0 +1,9 @@
.env
secrets.conf
*.swp
*.tmp
printer-[0-9]*_[0-9]*.cfg
*.bak
*.bkp
*.csv
*.zip

4
README.md Normal file
View File

@@ -0,0 +1,4 @@
# Klipper-Backup 💾
Klipper backup script for manual or automated GitHub backups
This backup is provided by [Klipper-Backup](https://github.com/Staubgeborener/klipper-backup).

106
printer_data/config/klack_probe.cfg Normal file
View File

@@ -0,0 +1,106 @@
# #####################################################################
# # KlackEnder- Macros
# #####################################################################
[homing_override]
# set_position_z:0 # Make printer think Z axis is at zero, so we can force a move upwards away from build plate
# axes: z #will only call override if x is involved in the homing call
gcode:
{% set svv = printer.save_variables.variables %}
{% if svv.probe_attached == True %}
{ action_raise_error("Probe is attached!") }
{% else %}
G28 {rawparams}
{% endif %}
[gcode_macro SCREWS_TILT_CALCULATE]
rename_existing: _SCREWS_TILT_CALCULATE
gcode:
G28 ; Should always home before calculation even if already homed
PROBE_ATTACH
_SCREWS_TILT_CALCULATE
PROBE_DOCK
[gcode_macro FORCE_PROBE_ATTACH]
gcode:
SAVE_VARIABLE VARIABLE=probe_attached VALUE={ True }
[gcode_macro FORCE_PROBE_DOCK]
gcode:
SAVE_VARIABLE VARIABLE=probe_attached VALUE={ False }
[gcode_macro TEST_IF]
gcode:
{% if not 'xyz' in printer.toolhead.homed_axes %}
{ action_raise_error("Must Home Axis First!") }
{% endif %}
{ action_respond_info("osie wyzerowane") }
[gcode_macro PROBE_ATTACH]
gcode:
{% set svv = printer.save_variables.variables %}
{% if not 'xyz' in printer.toolhead.homed_axes %}
{ action_raise_error("Must Home Axis First!") }
{% endif %}
{% if svv.probe_attached == True %}
{ action_respond_info("Probe is already attached!") }
{% else %}
G90
G1 Z20
G1 X244 F8000
G1 Z5
G1 Z20
G1 X0 F8000
SAVE_VARIABLE VARIABLE=probe_attached VALUE={ True }
{% endif %}
[gcode_macro PROBE_DOCK]
gcode:
{% set svv = printer.save_variables.variables %}
{% if not 'xyz' in printer.toolhead.homed_axes %}
{ action_raise_error("Must Home Axis First!") }
{% endif %}
{% if svv.probe_attached == False %}
{ action_respond_info("Probe is already docked!") }
{% else %}
G90
G1 Z20
G1 X244 F8000
G1 Z1
G1 X0 F8000
SAVE_VARIABLE VARIABLE=probe_attached VALUE={ False }
{% endif %}
[gcode_macro BED_MESH_CALIBRATE] #macro with parameter passing
rename_existing: _BED_MESH_CALIBRATE
gcode:
PROBE_ATTACH
_BED_MESH_CALIBRATE {rawparams}
PROBE_DOCK
[gcode_macro G29] #reliant on the macro above
gcode:
BED_MESH_CALIBRATE
[gcode_macro PROBE_CALIBRATE]
rename_existing: _PROBE_CALIBRATE
gcode:
PROBE_ATTACH
G90
G1 Z20
G1 X95 Y86 F8000 ; Readjust for center of bed adjusted for probe offset
_PROBE_CALIBRATE
TESTZ Z=20
[gcode_macro PROBE_ACCURACY]
rename_existing: _PROBE_ACCURACY
gcode:
PROBE_ATTACH
G90
G1 X95 Y86 F8000 ; Readjust for center of bed adjusted for probe offset
_PROBE_ACCURACY
PROBE_DOCK

59
printer_data/config/macro.cfg Normal file
View File

@@ -0,0 +1,59 @@
[gcode_macro START_PRINT]
gcode:
{% set bed_temp = params.BED_TEMP|default(50)|float %}
{% set ext_temp = params.EXTRUDER_TEMP|default(200)|float %}
# use absolute coordinates
G90
# extruder relative mode
M83
# set final bed temp
M140 S{bed_temp}
# set temporary nozzle temp to prevent oozing during homing
M104 S150
# allow partial nozzle warmup
G4 S10
# home all axis
G28
# load bed mesh profile
BED_MESH_PROFILE LOAD=hot
G1 Z50 F240
G1 X2 Y10 F3000
# set final nozzle temp
M104 S{ext_temp}
# wait for bed temp to stabilize
M190 S{bed_temp}
# wait for nozzle temp to stabilize
M109 S{ext_temp}
G1 Z0.28 F240
# prime the nozzle
G92 E0
G1 Y140 E10 F1500
G1 X2.3 F5000
# prime the nozzle
G92 E0
G1 Y10 E10 F1200
G92 E0
[gcode_macro END_PRINT]
gcode:
{% set print_height = params.MAX_HEIGHT|default(1)|float %}
{% set printable_height = printer.toolhead.axis_maximum.z|default(250)|float %}
# { action_respond_info( printable_height|string ) }
G91
G1 E-3
G90
{% if print_height < printable_height %}
{% set height = [print_height+2, printable_height]|min %}
G1 Z{height} F600
{% endif %}
G1 X0 Y220
M140 S0 ; turn off heatbed
M104 S0 ; turn off temperature
M107 ; turn off fan
M84 ; disable motors

54
printer_data/config/moonraker.conf Normal file
View File

@@ -0,0 +1,54 @@
[server]
host: 0.0.0.0
port: 7125
klippy_uds_address: /home/bartool/printer_data/comms/klippy.sock
[authorization]
trusted_clients:
10.0.0.0/8
127.0.0.0/8
169.254.0.0/16
172.16.0.0/12
192.168.0.0/16
FE80::/10
::1/128
cors_domains:
*.lan
*.local
*://localhost
*://localhost:*
*://my.mainsail.xyz
*://app.fluidd.xyz
[octoprint_compat]
[history]
[update_manager]
channel: dev
refresh_interval: 168
[update_manager mainsail-config]
type: git_repo
primary_branch: master
path: ~/mainsail-config
origin: https://github.com/mainsail-crew/mainsail-config.git
managed_services: klipper
[update_manager mainsail]
type: web
channel: stable
repo: mainsail-crew/mainsail
path: ~/mainsail
[power printer_switch]
type: homeassistant
protocol: http
address: 192.168.1.120
port: 8123
device: switch.power_strip_relay_3
token: eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJpc3MiOiIyNzJmMzA2ODcwYzI0ZWQyOTI0ODBkZWI4ZTg3NzBkMiIsImlhdCI6MTcxNjEwNDk4NywiZXhwIjoyMDMxNDY0OTg3fQ.WqQrI413D--RrWEsIhhukXbJdW6zXaoPY9WnmHRZpnw
domain: switch
locked_while_printing: True
restart_klipper_when_powered: True
restart_delay: 1.

222
printer_data/config/printer.cfg Normal file
View File

@@ -0,0 +1,222 @@
# This file contains pin mappings for the stock 2020 Creality Ender 3
# V2. To use this config, during "make menuconfig" select the
# STM32F103 with a "28KiB bootloader" and serial (on USART1 PA10/PA9)
# communication.
# If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select
# serial (on USART3 PB11/PB10), which is broken out on the 10 pin IDC
# cable used for the LCD module as follows:
# 3: Tx, 4: Rx, 9: GND, 10: VCC
# Flash this firmware by copying "out/klipper.bin" to a SD card and
# turning on the printer with the card inserted. The firmware
# filename must end in ".bin" and must not match the last filename
# that was flashed.
# See docs/Config_Reference.md for a description of parameters.
[include mainsail.cfg]
[include macro.cfg]
[include klack_probe.cfg]
[save_variables]
filename: ~/variables.cfg
[force_move]
enable_force_move = true
[stepper_x]
step_pin: PC2
dir_pin: PB9
enable_pin: !PC3
microsteps: 16
rotation_distance: 40
endstop_pin: ^PA5
position_endstop: 0
position_max: 245
homing_speed: 50
[stepper_y]
step_pin: PB8
dir_pin: PB7
enable_pin: !PC3
microsteps: 16
rotation_distance: 40
endstop_pin: ^PA6
position_endstop: -10
position_min: -10
position_max: 220
homing_speed: 50
[stepper_z]
step_pin: PB6
dir_pin: !PB5
enable_pin: !PC3
microsteps: 16
rotation_distance: 8
endstop_pin: ^PA7
position_endstop: -0.775
position_min: -1
position_max: 250
[extruder]
max_extrude_only_distance: 100.0
step_pin: PB4
dir_pin: PB3
enable_pin: !PC3
microsteps: 16
# rotation_distance: 34.406
rotation_distance: 7.531
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PA1
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC5
#control: pid
# tuned for stock hardware with 200 degree Celsius target
#pid_Kp: 21.527
#pid_Ki: 1.063
#pid_Kd: 108.982
min_temp: 0
max_temp: 300
[heater_bed]
heater_pin: PA2
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC4
#control: pid
# tuned for stock hardware with 50 degree Celsius target
#pid_Kp: 54.027
#pid_Ki: 0.770
#pid_Kd: 948.182
min_temp: 0
max_temp: 130
[fan]
pin: PA0
[mcu]
serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
restart_method: command
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 3000
max_z_velocity: 5
max_z_accel: 100
[bed_screws]
screw1_name: rear left screw
screw1: 27, 194 # Using rear left to take measurements as harder to reach
screw2_name: rear right screw
screw2: 194, 194
screw3_name: front right screw
screw3: 194, 23
screw4_name: front left screw
screw4: 27, 23
[screws_tilt_adjust]
screw1_name: rear left screw
screw1: 11, 171
screw2_name: rear right screw
screw2: 181, 171
screw3_name: front right screw
screw3: 181, 0
screw4_name: front left screw
screw4: 11, 0
horizontal_move_z: 10
speed: 50
screw_thread: CW-M4 # Use CW for Clockwise and CCW for Counter Clockwise
# [bltouch]
# sensor_pin: ^PB1
# control_pin: PB0
# x_offset: 35
# y_offset: 1
# z_offset: 1.472
# samples: 5
# sample_retract_dist: 5.0
[probe]
pin: ^PB1
x_offset: 15.7
y_offset: 23.0
z_offset: 4.0
samples: 5
sample_retract_dist: 2.0
speed: 10
lift_speed: 20
samples_result: median
# activate_gcode: PROBE_ATTACH
# deactivate_gcode: PROBE_DETTACH
[bed_mesh]
speed: 120
horizontal_move_z: 10
mesh_min: 20,20
mesh_max: 205,200
probe_count: 7,7
algorithm: bicubic
fade_start: 1
fade_end: 10
# fade_target: 0
zero_reference_position: 112.5, 110
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 20.304
#*# pid_ki = 1.074
#*# pid_kd = 95.937
#*#
#*# [heater_bed]
#*# control = pid
#*# pid_kp = 70.500
#*# pid_ki = 1.158
#*# pid_kd = 1073.363
#*#
#*# [bed_mesh hot]
#*# version = 1
#*# points =
#*# -0.037506, -0.027506, -0.005006, 0.007494, 0.009994, 0.009994, 0.019994
#*# -0.050006, -0.035006, -0.007506, 0.007494, 0.017494, 0.009994, 0.024994
#*# -0.050006, -0.032506, -0.007506, 0.012494, 0.022494, 0.014994, 0.019994
#*# -0.062506, -0.052506, -0.017506, -0.000006, 0.019994, 0.007494, 0.017494
#*# -0.047506, -0.037506, -0.000006, 0.022494, 0.022494, 0.017494, 0.022494
#*# -0.032506, -0.010006, 0.012494, 0.029994, 0.032494, 0.027494, 0.039994
#*# 0.002494, 0.009994, 0.032494, 0.042494, 0.047494, 0.042494, 0.037494
#*# x_count = 7
#*# y_count = 7
#*# mesh_x_pps = 2
#*# mesh_y_pps = 2
#*# algo = bicubic
#*# tension = 0.2
#*# min_x = 20.0
#*# max_x = 204.98
#*# min_y = 20.0
#*# max_y = 200.0
#*#
#*# [bed_mesh tescik]
#*# version = 1
#*# points =
#*# -0.027502, -0.035002, -0.032502, -0.030002, -0.040002, -0.045002, -0.035002
#*# -0.027502, -0.027502, -0.017502, -0.010002, -0.015002, -0.032502, -0.030002
#*# -0.030002, -0.027502, -0.010002, -0.002502, 0.002498, -0.010002, -0.010002
#*# -0.030002, -0.030002, -0.002502, -0.000002, 0.004998, -0.015002, -0.012502
#*# -0.020002, -0.020002, 0.007498, 0.024998, 0.014998, 0.007498, 0.007498
#*# -0.012502, -0.010002, 0.019998, 0.034998, 0.042498, 0.024998, 0.027498
#*# 0.027498, 0.032498, 0.044998, 0.044998, 0.069998, 0.024998, 0.019998
#*# x_count = 7
#*# y_count = 7
#*# mesh_x_pps = 2
#*# mesh_y_pps = 2
#*# algo = bicubic
#*# tension = 0.2
#*# min_x = 20.0
#*# max_x = 204.98
#*# min_y = 20.0
#*# max_y = 200.0