New backup from 12/28/2024 - 10:03:45 AM

printer_data/config/macro.cfg

@@ -0,0 +1,59 @@
+[gcode_macro START_PRINT]
+gcode:
+    {% set bed_temp = params.BED_TEMP|default(50)|float %}
+    {% set ext_temp = params.EXTRUDER_TEMP|default(200)|float %}
+    # use absolute coordinates
+    G90
+    # extruder relative mode
+    M83
+    # set final bed temp
+    M140 S{bed_temp}
+    # set temporary nozzle temp to prevent oozing during homing
+    M104 S150
+    # allow partial nozzle warmup
+    G4 S10
+    # home all axis
+    G28
+    # load bed mesh profile
+    BED_MESH_PROFILE LOAD=hot
+    
+    G1 Z50 F240
+    G1 X2 Y10 F3000
+    
+    # set final nozzle temp
+    M104 S{ext_temp}
+    # wait for bed temp to stabilize
+    M190 S{bed_temp}
+    # wait for nozzle temp to stabilize
+    M109 S{ext_temp}
+    
+    G1 Z0.28 F240
+    
+    # prime the nozzle
+    G92 E0
+    G1 Y140 E10 F1500
+    G1 X2.3 F5000
+    
+    # prime the nozzle
+    G92 E0
+    G1 Y10 E10 F1200
+    
+    G92 E0
+
+[gcode_macro END_PRINT]
+gcode:
+    {% set print_height = params.MAX_HEIGHT|default(1)|float %}
+    {% set printable_height = printer.toolhead.axis_maximum.z|default(250)|float %}
+    # { action_respond_info( printable_height|string ) }
+    G91
+    G1 E-3
+    G90
+    {% if print_height < printable_height %}
+      {% set height = [print_height+2, printable_height]|min %}
+      G1 Z{height} F600
+    {% endif %}
+    G1 X0 Y220 
+    M140 S0 ; turn off heatbed
+    M104 S0 ; turn off temperature
+    M107 ; turn off fan
+    M84 ; disable motors