New backup from 12/28/2024 - 10:03:45 AM

printer_data/config/klack_probe.cfg

@@ -0,0 +1,106 @@
+
+# #####################################################################
+# # KlackEnder- Macros
+# #####################################################################
+
+[homing_override]
+# set_position_z:0 # Make printer think Z axis is at zero, so we can force a move upwards away from build plate
+# axes: z #will only call override if x is involved in the homing call
+gcode: 
+  {% set svv = printer.save_variables.variables %}
+  {% if  svv.probe_attached == True %}
+      { action_raise_error("Probe is attached!") }
+  {% else %}
+      G28 {rawparams}
+  {% endif %}
+
+[gcode_macro SCREWS_TILT_CALCULATE]
+rename_existing: _SCREWS_TILT_CALCULATE
+gcode:
+  G28 ; Should always home before calculation even if already homed
+  PROBE_ATTACH
+  _SCREWS_TILT_CALCULATE
+  PROBE_DOCK
+
+[gcode_macro FORCE_PROBE_ATTACH]
+gcode:
+  SAVE_VARIABLE VARIABLE=probe_attached VALUE={ True }
+
+[gcode_macro FORCE_PROBE_DOCK]
+gcode:
+  SAVE_VARIABLE VARIABLE=probe_attached VALUE={ False }
+
+[gcode_macro TEST_IF]
+gcode:
+  {% if not 'xyz' in printer.toolhead.homed_axes %}
+    { action_raise_error("Must Home Axis First!") }
+  {% endif %}
+  
+  { action_respond_info("osie wyzerowane") }
+
+[gcode_macro PROBE_ATTACH]
+gcode:
+  {% set svv = printer.save_variables.variables %}
+  {% if not 'xyz' in printer.toolhead.homed_axes %}
+    { action_raise_error("Must Home Axis First!") }
+  {% endif %}
+  
+  {% if  svv.probe_attached == True %}
+    { action_respond_info("Probe is already attached!") }
+  {% else %}
+    G90
+    G1 Z20
+    G1 X244 F8000
+    G1 Z5
+    G1 Z20
+    G1 X0 F8000
+    SAVE_VARIABLE VARIABLE=probe_attached VALUE={ True }
+  {% endif %}
+
+[gcode_macro PROBE_DOCK]
+gcode:
+  {% set svv = printer.save_variables.variables %}
+  {% if not 'xyz' in printer.toolhead.homed_axes %}
+    { action_raise_error("Must Home Axis First!") }
+  {% endif %}
+  
+  {% if  svv.probe_attached == False %}
+    { action_respond_info("Probe is already docked!") }
+  {% else %}
+    G90
+    G1 Z20
+    G1 X244 F8000
+    G1 Z1
+    G1 X0 F8000
+    SAVE_VARIABLE VARIABLE=probe_attached VALUE={ False }
+  {% endif %}
+
+[gcode_macro BED_MESH_CALIBRATE] #macro with parameter passing
+rename_existing: _BED_MESH_CALIBRATE
+gcode:
+  PROBE_ATTACH
+  _BED_MESH_CALIBRATE {rawparams}
+  PROBE_DOCK
+
+[gcode_macro G29] #reliant on the macro above
+gcode:
+  BED_MESH_CALIBRATE
+
+[gcode_macro PROBE_CALIBRATE]
+rename_existing: _PROBE_CALIBRATE
+gcode:
+  PROBE_ATTACH
+  G90
+  G1 Z20
+  G1 X95 Y86 F8000 ; Readjust for center of bed adjusted for probe offset
+  _PROBE_CALIBRATE
+  TESTZ Z=20
+
+[gcode_macro PROBE_ACCURACY]
+rename_existing: _PROBE_ACCURACY
+gcode:
+  PROBE_ATTACH
+  G90
+  G1 X95 Y86 F8000 ; Readjust for center of bed adjusted for probe offset
+  _PROBE_ACCURACY
+  PROBE_DOCK