85 lines
2.7 KiB
C
85 lines
2.7 KiB
C
// #include "main.h"
|
|
#include "st7565.h"
|
|
|
|
static uint8_t st7565_buffor[ST7565_BUFFER_SIZE];
|
|
|
|
static void ST7565_SendCommand(st7565_handle_t *hdisp, uint8_t data)
|
|
{
|
|
HAL_GPIO_WritePin(hdisp->a0_port, hdisp->a0_pin, GPIO_PIN_RESET);
|
|
|
|
HAL_SPI_Transmit(hdisp->hspi, &data, 1, HAL_MAX_DELAY);
|
|
}
|
|
|
|
static void ST7565_SendData(st7565_handle_t *hdisp, uint8_t *data, uint16_t size)
|
|
{
|
|
HAL_GPIO_WritePin(hdisp->a0_port, hdisp->a0_pin, GPIO_PIN_SET);
|
|
|
|
HAL_SPI_Transmit(hdisp->hspi, data, size, HAL_MAX_DELAY);
|
|
}
|
|
|
|
void ST7565_Init(st7565_handle_t *hdisp, GFX_display_t *disp)
|
|
{
|
|
if (hdisp == NULL || hdisp->hspi == NULL || hdisp->a0_port == NULL || hdisp->cs_port == NULL || hdisp->rst_port == NULL)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
disp->width = ST7565_WIDTH;
|
|
disp->height = ST7565_HEIGHT;
|
|
disp->buffor = st7565_buffor;
|
|
// toggle RST low to reset; CS low so it'll listen to us
|
|
HAL_GPIO_WritePin(hdisp->cs_port, hdisp->cs_pin, GPIO_PIN_RESET);
|
|
|
|
HAL_GPIO_WritePin(hdisp->rst_port, hdisp->rst_pin, GPIO_PIN_RESET);
|
|
HAL_Delay(500);
|
|
HAL_GPIO_WritePin(hdisp->rst_port, hdisp->rst_pin, GPIO_PIN_SET);
|
|
|
|
// LCD bias select
|
|
ST7565_SendCommand(hdisp, CMD_SET_BIAS_7);
|
|
// ADC select
|
|
ST7565_SendCommand(hdisp, CMD_SET_ADC_REVERSE);
|
|
// SHL select
|
|
ST7565_SendCommand(hdisp, CMD_SET_COM_NORMAL);
|
|
// Initial display line
|
|
ST7565_SendCommand(hdisp, CMD_SET_DISP_START_LINE);
|
|
|
|
// turn on voltage converter (VC=1, VR=0, VF=0)
|
|
ST7565_SendCommand(hdisp, CMD_SET_POWER_CONTROL | 0x4);
|
|
// wait for 50% rising
|
|
HAL_Delay(50);
|
|
|
|
// turn on voltage regulator (VC=1, VR=1, VF=0)
|
|
ST7565_SendCommand(hdisp, CMD_SET_POWER_CONTROL | 0x6);
|
|
// wait >=50ms
|
|
HAL_Delay(50);
|
|
|
|
// turn on voltage follower (VC=1, VR=1, VF=1)
|
|
ST7565_SendCommand(hdisp, CMD_SET_POWER_CONTROL | 0x7);
|
|
// wait
|
|
HAL_Delay(10);
|
|
|
|
// set lcd operating voltage (regulator resistor, ref voltage resistor)
|
|
ST7565_SendCommand(hdisp, CMD_SET_RESISTOR_RATIO | 0x6);
|
|
|
|
ST7565_SendCommand(hdisp, CMD_DISPLAY_ON);
|
|
ST7565_SendCommand(hdisp, CMD_SET_ALLPTS_NORMAL);
|
|
ST7565_SendCommand(hdisp, CMD_SET_VOLUME_FIRST);
|
|
ST7565_SendCommand(hdisp, CMD_SET_VOLUME_SECOND | (0x00 & 0x3f));
|
|
|
|
HAL_GPIO_WritePin(hdisp->cs_port, hdisp->cs_pin, GPIO_PIN_SET);
|
|
}
|
|
|
|
void ST7565_DisplayAll(st7565_handle_t *hdisp)
|
|
{
|
|
HAL_GPIO_WritePin(hdisp->cs_port, hdisp->cs_pin, GPIO_PIN_RESET);
|
|
for (uint8_t p = 0; p < 8; p++)
|
|
{
|
|
ST7565_SendCommand(hdisp, CMD_SET_PAGE | p);
|
|
ST7565_SendCommand(hdisp, CMD_SET_COLUMN_UPPER | 0);
|
|
ST7565_SendCommand(hdisp, CMD_SET_COLUMN_LOWER | 0);
|
|
|
|
ST7565_SendData(hdisp, &st7565_buffor[128 * p], 128);
|
|
}
|
|
HAL_GPIO_WritePin(hdisp->cs_port, hdisp->cs_pin, GPIO_PIN_SET);
|
|
}
|