flatcam-wsl/locale_template/strings.pot

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2022-05-11 23:13+0300\n"
"PO-Revision-Date: 2019-03-25 15:08+0200\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 3.0.1\n"
"X-Poedit-Basepath: ..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: doc\n"
"X-Poedit-SearchPathExcluded-2: tests\n"
"X-Poedit-SearchPathExcluded-3: venv\n"

#: Bookmark.py:57 Bookmark.py:84
msgid "Title"
msgstr ""

#: Bookmark.py:58 Bookmark.py:89
msgid "Web Link"
msgstr ""

#: Bookmark.py:62
msgid ""
"Index.\n"
"The rows in gray color will populate the Bookmarks menu.\n"
"The number of gray colored rows is set in Preferences."
msgstr ""

#: Bookmark.py:66
msgid ""
"Description of the link that is set as an menu action.\n"
"Try to keep it short because it is installed as a menu item."
msgstr ""

#: Bookmark.py:69
msgid "Web Link. E.g: https://your_website.org "
msgstr ""

#: Bookmark.py:78
msgid "New Bookmark"
msgstr ""

#: Bookmark.py:99
msgid "Add Entry"
msgstr ""

#: Bookmark.py:100
msgid "Remove Entry"
msgstr ""

#: Bookmark.py:101
msgid "Export List"
msgstr ""

#: Bookmark.py:102
msgid "Import List"
msgstr ""

#: Bookmark.py:192
msgid "Title entry is empty."
msgstr ""

#: Bookmark.py:201
msgid "Web link entry is empty."
msgstr ""

#: Bookmark.py:209
msgid "Either the Title or the Weblink already in the table."
msgstr ""

#: Bookmark.py:229
msgid "Bookmark added."
msgstr ""

#: Bookmark.py:245 appMain.py:3920 appMain.py:3962
msgid "Backup Site"
msgstr ""

#: Bookmark.py:246
msgid "This bookmark can not be removed"
msgstr ""

#: Bookmark.py:277
msgid "Bookmark removed."
msgstr ""

#: Bookmark.py:293
msgid "Export Bookmarks"
msgstr ""

#: Bookmark.py:295 appGUI/MainGUI.py:659
msgid "Bookmarks"
msgstr ""

#: Bookmark.py:302 Bookmark.py:344 appDatabase.py:2129 appDatabase.py:2175
#: appEditors/AppExcEditor.py:2075 appEditors/AppExcEditor.py:2143
#: appEditors/AppExcEditor.py:2165 appEditors/AppExcEditor.py:2426
#: appEditors/AppExcEditor.py:2458 appEditors/AppGeoEditor.py:2833
#: appEditors/AppGeoEditor.py:2859 appEditors/AppGeoEditor.py:2885
#: appEditors/AppGeoEditor.py:4540 appEditors/AppGerberEditor.py:5038
#: appEditors/AppGerberEditor.py:7261 appEditors/AppTextEditor.py:282
#: appEditors/geo_plugins/GeoPaintPlugin.py:103
#: appEditors/geo_plugins/GeoTransformationPlugin.py:130 appGUI/MainGUI.py:3588
#: appGUI/MainGUI.py:3820 appGUI/MainGUI.py:4053 appGUI/MainGUI.py:4313 appMain.py:1732
#: appMain.py:3113 appMain.py:5066 appMain.py:5486 appMain.py:9596 appMain.py:9634
#: appMain.py:9677 appMain.py:9702 appMain.py:9741 appMain.py:9765 appMain.py:9816
#: appMain.py:9854 appMain.py:9900 appMain.py:9942 appMain.py:9984 appMain.py:10025
#: appMain.py:10067 appMain.py:10112 appMain.py:10170 appMain.py:10202 appMain.py:10232
#: appMain.py:10454 appMain.py:10491 appMain.py:10534 appMain.py:10610 appMain.py:10669
#: appMain.py:10950 appMain.py:10985 appObjects/ObjectCollection.py:155
#: appPlugins/ToolCutOut.py:2045 appPlugins/ToolDistance.py:625 appPlugins/ToolFilm.py:411
#: appPlugins/ToolFilm.py:561 appPlugins/ToolImage.py:180 appPlugins/ToolImage.py:206
#: appPlugins/ToolLevelling.py:1572 appPlugins/ToolMarkers.py:802
#: appPlugins/ToolMarkers.py:911 appPlugins/ToolMove.py:277 appPlugins/ToolNCC.py:1192
#: appPlugins/ToolNCC.py:1271 appPlugins/ToolNCC.py:1329 appPlugins/ToolNCC.py:3965
#: appPlugins/ToolPaint.py:837 appPlugins/ToolPaint.py:923 appPlugins/ToolPaint.py:983
#: appPlugins/ToolPaint.py:2846 appPlugins/ToolPcbWizard.py:213
#: appPlugins/ToolPcbWizard.py:236 appPlugins/ToolQRCode.py:604 appPlugins/ToolQRCode.py:653
#: appPlugins/ToolSolderPaste.py:584 appPlugins/ToolSolderPaste.py:922
#: appPlugins/ToolSolderPaste.py:978
msgid "Cancelled."
msgstr ""

#: Bookmark.py:310 appDatabase.py:2137 appEditors/AppTextEditor.py:337 appMain.py:3121
#: appMain.py:10920 appMain.py:11128 appMain.py:11263 appMain.py:11329 appMain.py:12385
#: appObjects/CNCJobObject.py:762 appObjects/CNCJobObject.py:1184 appPlugins/ToolFilm.py:973
#: appPlugins/ToolLevelling.py:1494 appPlugins/ToolLevelling.py:1686
#: appPlugins/ToolSolderPaste.py:1212
msgid ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."
msgstr ""

#: Bookmark.py:321 Bookmark.py:351 appDatabase.py:1728 appDatabase.py:2148
#: appDatabase.py:2182 appMain.py:3132 appMain.py:6663 appPlugins/ToolNCC.py:1202
#: appPlugins/ToolPaint.py:847 defaults.py:948 defaults.py:1119
msgid "Could not load the file."
msgstr ""

#: Bookmark.py:331
msgid "Failed to write bookmarks to file."
msgstr ""

#: Bookmark.py:333
msgid "Exported bookmarks to"
msgstr ""

#: Bookmark.py:339
msgid "Import Bookmarks"
msgstr ""

#: Bookmark.py:358
msgid "Imported Bookmarks from"
msgstr ""

#: appCommon/Common.py:49
msgid "The user requested a graceful exit of the current task."
msgstr ""

#: appCommon/Common.py:302 appPlugins/ToolCopperThieving.py:378 appPlugins/ToolFollow.py:213
#: appPlugins/ToolIsolation.py:1662 appPlugins/ToolNCC.py:1572 appPlugins/ToolPaint.py:1197
msgid "Click the start point of the area."
msgstr ""

#: appCommon/Common.py:361 appPlugins/ToolFollow.py:422 appPlugins/ToolNCC.py:1633
#: appPlugins/ToolPaint.py:1347
msgid "Click the end point of the area."
msgstr ""

#: appCommon/Common.py:367 appCommon/Common.py:471 appPlugins/ToolCopperThieving.py:422
#: appPlugins/ToolFollow.py:428 appPlugins/ToolFollow.py:479
#: appPlugins/ToolIsolation.py:2733 appPlugins/ToolIsolation.py:2785
#: appPlugins/ToolNCC.py:1637 appPlugins/ToolNCC.py:1689 appPlugins/ToolPaint.py:1353
#: appPlugins/ToolPaint.py:1404
msgid "Zone added. Click to start adding next zone or right click to finish."
msgstr ""

#: appCommon/Common.py:415 appEditors/AppGeoEditor.py:1297 appEditors/AppGeoEditor.py:1446
#: appEditors/AppGeoEditor.py:1508 appEditors/AppGeoEditor.py:1659
#: appEditors/AppGerberEditor.py:1029 appEditors/AppGerberEditor.py:1409
#: appPlugins/ToolFollow.py:450 appPlugins/ToolIsolation.py:2756 appPlugins/ToolNCC.py:1660
#: appPlugins/ToolPaint.py:1375
msgid "Click on next Point or click right mouse button to complete ..."
msgstr ""

#: appCommon/Common.py:502
msgid "Exclusion areas added. Checking overlap with the object geometry ..."
msgstr ""

#: appCommon/Common.py:508
msgid "Failed. Exclusion areas intersects the object geometry ..."
msgstr ""

#: appCommon/Common.py:511
msgid "Exclusion areas added."
msgstr ""

#: appCommon/Common.py:515 appCommon/Common.py:645 appCommon/Common.py:702
msgid "Generate the CNC Job object."
msgstr ""

#: appCommon/Common.py:515
msgid "With Exclusion areas."
msgstr ""

#: appCommon/Common.py:550
msgid "Cancelled. Area exclusion drawing was interrupted."
msgstr ""

#: appCommon/Common.py:655 appCommon/Common.py:705
msgid "All exclusion zones deleted."
msgstr ""

#: appCommon/Common.py:696
msgid "Selected exclusion zones deleted."
msgstr ""

#: appDatabase.py:28 appEditors/AppGeoEditor.py:118 appEditors/AppGeoEditor.py:1486
#: appEditors/AppGeoEditor.py:1490 appEditors/AppGeoEditor.py:1526
#: appEditors/AppGeoEditor.py:1862 appGUI/MainGUI.py:1833 appPlugins/ToolMilling.py:4334
msgid "Path"
msgstr ""

#: appDatabase.py:28 appPlugins/ToolMilling.py:4334
msgid "In"
msgstr ""

#: appDatabase.py:28 appPlugins/ToolMilling.py:4334
msgid "Out"
msgstr ""

#: appDatabase.py:28 appGUI/MainGUI.py:933 appGUI/MainGUI.py:1818 appMain.py:9146
#: appPlugins/ToolMilling.py:4334 appPlugins/ToolMilling.py:4342
msgid "Custom"
msgstr ""

#: appDatabase.py:29 appEditors/appGCodeEditor.py:192 appObjects/CNCJobObject.py:264
#: appObjects/GeometryObject.py:125 appPlugins/ToolMilling.py:4446
msgid "Roughing"
msgstr ""

#: appDatabase.py:29 appEditors/appGCodeEditor.py:192 appObjects/CNCJobObject.py:264
#: appObjects/GeometryObject.py:125 appPlugins/ToolMilling.py:4446
msgid "Finishing"
msgstr ""

#: appDatabase.py:29 appDatabase.py:271 appDatabase.py:593 appDatabase.py:1761
#: appDatabase.py:2226 appDatabase.py:2409 appEditors/appGCodeEditor.py:192
#: appGUI/MainGUI.py:1157 appGUI/MainGUI.py:2551 appGUI/MainGUI.py:5016
#: appObjects/CNCJobObject.py:264 appObjects/GeometryObject.py:125
#: appPlugins/ToolIsolation.py:191 appPlugins/ToolIsolation.py:3346
#: appPlugins/ToolMilling.py:4446 appPlugins/ToolNCC.py:4290
msgid "Isolation"
msgstr ""

#: appDatabase.py:29 appEditors/appGCodeEditor.py:192 appObjects/CNCJobObject.py:264
#: appObjects/GeometryObject.py:125 appPlugins/ToolMilling.py:4446
msgid "Polishing"
msgstr ""

#: appDatabase.py:38 appGUI/preferences/gerber/GerberGenPrefGroupUI.py:378
msgid "ID"
msgstr ""

#: appDatabase.py:38 appDatabase.py:203 appEditors/AppGeoEditor.py:5302
#: appGUI/ObjectUI.py:222 appGUI/ObjectUI.py:617 appGUI/ObjectUI.py:907
#: appGUI/ObjectUI.py:1232 appGUI/ObjectUI.py:1497 appGUI/ObjectUI.py:1560
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:376
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:379 appMain.py:8653
#: appPlugins/ToolFiducials.py:965
msgid "Name"
msgstr ""

#: appDatabase.py:38 appDatabase.py:265 appPlugins/ToolDblSided.py:728
#: appPlugins/ToolPanelize.py:1173 appPlugins/ToolSub.py:833 appPlugins/ToolSub.py:895
msgid "Target"
msgstr ""

#: appDatabase.py:38 appDatabase.py:216 appEditors/AppExcEditor.py:4025
#: appEditors/AppExcEditor.py:5215 appGUI/ObjectUI.py:705
#: appObjects/AppObjectTemplate.py:781 appObjects/AppObjectTemplate.py:847
#: appPlugins/ToolDrilling.py:2443 appPlugins/ToolIsolation.py:3429
#: appPlugins/ToolMilling.py:4032 appPlugins/ToolNCC.py:4127 appPlugins/ToolPaint.py:3009
#: appPlugins/ToolPcbWizard.py:425 appPlugins/ToolReport.py:430 appPlugins/ToolReport.py:499
#: appPlugins/ToolSolderPaste.py:1295 tclCommands/TclCommandDrillcncjob.py:210
msgid "Diameter"
msgstr ""

#: appDatabase.py:77
msgid "Tool Description"
msgstr ""

#: appDatabase.py:92
msgid "Milling Parameters"
msgstr ""

#: appDatabase.py:105
msgid "NCC Parameters"
msgstr ""

#: appDatabase.py:118
msgid "Paint Parameters"
msgstr ""

#: appDatabase.py:131
msgid "Isolation Parameters"
msgstr ""

#: appDatabase.py:144
msgid "Drilling Parameters"
msgstr ""

#: appDatabase.py:157
msgid "Cutout Parameters"
msgstr ""

#: appDatabase.py:205
msgid ""
"Tool name.\n"
"This is not used in the app, it's function\n"
"is to serve as a note for the user."
msgstr ""

#: appDatabase.py:218 appDatabase.py:1181 appEditors/exc_plugins/ExcDrillArrayPlugin.py:113
#: appEditors/exc_plugins/ExcDrillPlugin.py:120
#: appEditors/exc_plugins/ExcResizePlugin.py:112
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:111
#: appEditors/exc_plugins/ExcSlotPlugin.py:120
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:206 appPlugins/ToolCalculators.py:637
msgid "Tool Diameter"
msgstr ""

#: appDatabase.py:229
msgid "Diameter Tolerance"
msgstr ""

#: appDatabase.py:231
msgid ""
"Tool tolerance. This tool will be used if the desired tool diameter\n"
"is within the tolerance specified here."
msgstr ""

#: appDatabase.py:237
msgid "Min"
msgstr ""

#: appDatabase.py:239
msgid "Set the tool tolerance minimum."
msgstr ""

#: appDatabase.py:251
msgid "Max"
msgstr ""

#: appDatabase.py:253
msgid "Set the tool tolerance maximum."
msgstr ""

#: appDatabase.py:267
msgid "The kind of Application Tool where this tool is to be used."
msgstr ""

#: appDatabase.py:271 appDatabase.py:1758 appDatabase.py:1799 appDatabase.py:2210
#: appDatabase.py:2406 appGUI/MainGUI.py:1574
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:20
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:23
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:22
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:23 appMain.py:8651
msgid "General"
msgstr ""

#: appDatabase.py:271 appDatabase.py:1759 appDatabase.py:2213 appDatabase.py:2407
#: appGUI/MainGUI.py:1148 appGUI/MainGUI.py:2542 appGUI/MainGUI.py:5020
#: appGUI/ObjectUI.py:762 appGUI/ObjectUI.py:1038 appPlugins/ToolMilling.py:76
#: appPlugins/ToolMilling.py:217 appPlugins/ToolMilling.py:3902
msgid "Milling"
msgstr ""

#: appDatabase.py:271 appDatabase.py:1760 appDatabase.py:2218 appDatabase.py:2408
#: appGUI/MainGUI.py:1146 appGUI/MainGUI.py:2540 appGUI/ObjectUI.py:754
#: appPlugins/ToolDrilling.py:33 appPlugins/ToolDrilling.py:176
#: appPlugins/ToolDrilling.py:1176 appPlugins/ToolDrilling.py:2355
msgid "Drilling"
msgstr ""

#: appDatabase.py:271 appDatabase.py:1762 appDatabase.py:2234 appDatabase.py:2410
#: appEditors/geo_plugins/GeoPaintPlugin.py:220 appEditors/geo_plugins/GeoPaintPlugin.py:325
#: appGUI/MainGUI.py:771 appGUI/MainGUI.py:1163 appGUI/MainGUI.py:1852
#: appGUI/MainGUI.py:2557 appGUI/ObjectUI.py:1046 appPlugins/ToolPaint.py:195
#: appPlugins/ToolPaint.py:879 appPlugins/ToolPaint.py:2898
msgid "Paint"
msgstr ""

#: appDatabase.py:271 appDatabase.py:1763 appDatabase.py:2242 appDatabase.py:2411
#: appGUI/MainGUI.py:1161 appGUI/MainGUI.py:2555 appGUI/ObjectUI.py:411
#: appGUI/ObjectUI.py:1056 appPlugins/ToolNCC.py:195 appPlugins/ToolNCC.py:1228
#: appPlugins/ToolNCC.py:4015
msgid "NCC"
msgstr ""

#: appDatabase.py:271 appDatabase.py:1764 appDatabase.py:2250 appDatabase.py:2412
#: appGUI/MainGUI.py:1168 appGUI/MainGUI.py:2562 appGUI/ObjectUI.py:382
#: appPlugins/ToolCutOut.py:170 appPlugins/ToolCutOut.py:466 appPlugins/ToolCutOut.py:2212
msgid "Cutout"
msgstr ""

#: appDatabase.py:285 appEditors/appGCodeEditor.py:812 appGUI/ObjectUI.py:990
#: appGUI/ObjectUI.py:1388 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:444
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:148
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:330
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:464
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:321
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:285 appPlugins/ToolCutOut.py:2585
#: appPlugins/ToolFollow.py:734 appPlugins/ToolIsolation.py:3580
#: appPlugins/ToolIsolation.py:3948 appPlugins/ToolMilling.py:4404
#: appPlugins/ToolNCC.py:4127 appPlugins/ToolNCC.py:4563 appPlugins/ToolPaint.py:3009
#: appPlugins/ToolPaint.py:3320
msgid "Shape"
msgstr ""

#: appDatabase.py:287 appGUI/ObjectUI.py:1014
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:150 appPlugins/ToolIsolation.py:3582
#: appPlugins/ToolMilling.py:4406 appPlugins/ToolNCC.py:4145 appPlugins/ToolPaint.py:3027
msgid ""
"Tool Shape. \n"
"Can be:\n"
"C1 ... C4 = circular tool with x flutes\n"
"B = ball tip milling tool\n"
"V = v-shape milling tool\n"
"L = laser"
msgstr ""

#: appDatabase.py:303
msgid "V-Dia"
msgstr ""

#: appDatabase.py:305
msgid ""
"V-Dia.\n"
"Diameter of the tip for V-Shape Tools."
msgstr ""

#: appDatabase.py:317
msgid "V-Angle"
msgstr ""

#: appDatabase.py:319
msgid ""
"V-Agle.\n"
"Angle at the tip for the V-Shape Tools."
msgstr ""

#: appDatabase.py:336 appEditors/appGCodeEditor.py:812 appGUI/ObjectUI.py:990
#: appGUI/ObjectUI.py:1388 appPlugins/ToolMilling.py:4434
msgid "Job"
msgstr ""

#: appDatabase.py:339 appPlugins/ToolMilling.py:4437
msgid ""
"- Isolation -> informative - lower Feedrate as it uses a milling bit with a fine tip.\n"
"- Roughing  -> informative - lower Feedrate and multiDepth cut.\n"
"- Finishing -> informative - higher Feedrate, without multiDepth.\n"
"- Polish -> adds a painting sequence over the whole area of the object"
msgstr ""

#: appDatabase.py:354
msgid "Tool Offset"
msgstr ""

#: appDatabase.py:356
msgid ""
"Tool Offset.\n"
"Can be of a few types:\n"
"Path = zero offset\n"
"In = offset inside by half of tool diameter\n"
"Out = offset outside by half of tool diameter\n"
"Custom = custom offset using the Custom Offset value"
msgstr ""

#: appDatabase.py:371
msgid "Custom Offset"
msgstr ""

#: appDatabase.py:373
msgid ""
"Custom Offset.\n"
"A value to be used as offset from the current path."
msgstr ""

#: appDatabase.py:390 appDatabase.py:889 appEditors/appGCodeEditor.py:823
#: appGUI/ObjectUI.py:1398 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:38
#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:75
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:67
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:54
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:96
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:84
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:97
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:100
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:108 appPlugins/ToolCalculators.py:626
#: appPlugins/ToolCutOut.py:2392 appPlugins/ToolDrilling.py:2514
#: appPlugins/ToolIsolation.py:3647 appPlugins/ToolMilling.py:1428
#: appPlugins/ToolMilling.py:4550
msgid "Cut Z"
msgstr ""

#: appDatabase.py:392
msgid ""
"Cutting Depth.\n"
"The depth at which to cut into material."
msgstr ""

#: appDatabase.py:404 appDatabase.py:923
msgid "MultiDepth"
msgstr ""

#: appDatabase.py:406
msgid ""
"Multi Depth.\n"
"Selecting this will allow cutting in multiple passes,\n"
"each pass adding a DPP parameter depth."
msgstr ""

#: appDatabase.py:417 appDatabase.py:939
msgid "DPP"
msgstr ""

#: appDatabase.py:419 appDatabase.py:941
msgid ""
"DPP. Depth per Pass.\n"
"The value used to cut into material on each pass."
msgstr ""

#: appDatabase.py:431 appDatabase.py:955
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:93
#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:168
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:126 appPlugins/ToolDrilling.py:1560
#: appPlugins/ToolDrilling.py:2556 appPlugins/ToolMilling.py:3596
#: appPlugins/ToolMilling.py:4592 appPlugins/ToolSolderPaste.py:1380
msgid "Travel Z"
msgstr ""

#: appDatabase.py:433
msgid ""
"Clearance Height.\n"
"Height at which the milling bit will travel between cuts,\n"
"above the surface of the material, avoiding all fixtures."
msgstr ""

#: appDatabase.py:446
msgid "ExtraCut"
msgstr ""

#: appDatabase.py:448
msgid ""
"Extra Cut.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation."
msgstr ""

#: appDatabase.py:461
msgid "E-Cut Length"
msgstr ""

#: appDatabase.py:463
msgid ""
"Extra Cut length.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation. This is the length of\n"
"the extra cut."
msgstr ""

#: appDatabase.py:484 appGUI/preferences/tools/ToolsMillPrefGroupUI.py:198
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:163
#: appPlugins/ToolMilling.py:4610
msgid "Feedrate X-Y"
msgstr ""

#: appDatabase.py:486
msgid ""
"Feedrate X-Y. Feedrate\n"
"The speed on XY plane used while cutting into material."
msgstr ""

#: appDatabase.py:498 appDatabase.py:978
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:154
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:213
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:190
#: appPlugins/ToolDrilling.py:2573 appPlugins/ToolMilling.py:4628
msgid "Feedrate Z"
msgstr ""

#: appDatabase.py:500
msgid ""
"Feedrate Z\n"
"The speed on Z plane."
msgstr ""

#: appDatabase.py:512
msgid "FR Rapids"
msgstr ""

#: appDatabase.py:514
msgid ""
"FR Rapids. Feedrate Rapids\n"
"Speed used while moving as fast as possible.\n"
"This is used only by some devices that can't use\n"
"the G0 g-code command. Mostly 3D printers."
msgstr ""

#: appDatabase.py:533 appDatabase.py:1018
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:229 appPlugins/ToolDrilling.py:1578
#: appPlugins/ToolDrilling.py:2612 appPlugins/ToolMilling.py:3614
#: appPlugins/ToolMilling.py:4698 appPlugins/ToolSolderPaste.py:1558
#: appPlugins/ToolSolderPaste.py:1595
msgid "Spindle speed"
msgstr ""

#: appDatabase.py:535
msgid ""
"Spindle Speed.\n"
"If it's left empty it will not be used.\n"
"The speed of the spindle in RPM."
msgstr ""

#: appDatabase.py:548 appDatabase.py:1033 appPlugins/ToolDrilling.py:2643
#: appPlugins/ToolMilling.py:4729 appPlugins/ToolSolderPaste.py:1572
#: appPlugins/ToolSolderPaste.py:1609
msgid "Dwell"
msgstr ""

#: appDatabase.py:550 appDatabase.py:1035
msgid ""
"Dwell.\n"
"Check this if a delay is needed to allow\n"
"the spindle motor to reach its set speed."
msgstr ""

#: appDatabase.py:561 appDatabase.py:1046
msgid "Dwelltime"
msgstr ""

#: appDatabase.py:563 appDatabase.py:1048
msgid ""
"Dwell Time.\n"
"A delay used to allow the motor spindle reach its set speed."
msgstr ""

#: appDatabase.py:583 appPlugins/ToolNCC.py:4280
msgid "Operation"
msgstr ""

#: appDatabase.py:585 appPlugins/ToolNCC.py:4282
msgid ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."
msgstr ""

#: appDatabase.py:592 appEditors/AppGerberEditor.py:6619
#: appEditors/exc_plugins/ExcCopyPlugin.py:153 appEditors/geo_plugins/GeoCopyPlugin.py:151
#: appEditors/geo_plugins/GeoPathPlugin.py:146 appPlugins/ToolNCC.py:4289
msgid "Clear"
msgstr ""

#: appDatabase.py:601 appDatabase.py:842
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:55
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:203
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:578
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:136 appPlugins/ToolIsolation.py:3712
#: appPlugins/ToolMilling.py:4283 appPlugins/ToolNCC.py:4298
msgid "Milling Type"
msgstr ""

#: appDatabase.py:603 appDatabase.py:611 appDatabase.py:844 appDatabase.py:852
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:57
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:205
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:213
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:138
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:146 appPlugins/ToolIsolation.py:3714
#: appPlugins/ToolIsolation.py:3722 appPlugins/ToolNCC.py:4300 appPlugins/ToolNCC.py:4308
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""

#: appDatabase.py:608 appDatabase.py:849
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:61
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:210
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:143 appPlugins/ToolIsolation.py:3719
#: appPlugins/ToolNCC.py:4305
msgid "Climb"
msgstr ""

#: appDatabase.py:609 appDatabase.py:850
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:211
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144 appPlugins/ToolIsolation.py:3720
#: appPlugins/ToolNCC.py:4306
msgid "Conventional"
msgstr ""

#: appDatabase.py:621 appDatabase.py:727 appDatabase.py:827 appDatabase.py:1076
#: appEditors/geo_plugins/GeoPaintPlugin.py:247
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:254
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:532
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:612
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:168
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:151 appPlugins/ToolDrilling.py:2691
#: appPlugins/ToolIsolation.py:3697 appPlugins/ToolMilling.py:4364
#: appPlugins/ToolMilling.py:4467 appPlugins/ToolNCC.py:4321 appPlugins/ToolPaint.py:3144
msgid "Overlap"
msgstr ""

#: appDatabase.py:623 appDatabase.py:729 appEditors/geo_plugins/GeoPaintPlugin.py:249
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:614
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:170
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:153 appPlugins/ToolMilling.py:4366
#: appPlugins/ToolNCC.py:4323 appPlugins/ToolPaint.py:3146
msgid ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be processed are still \n"
"not processed.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""

#: appDatabase.py:642 appDatabase.py:1118 appEditors/geo_plugins/GeoPaintPlugin.py:267
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:70
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:277
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:296
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:56
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:41
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:49
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:122
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:308
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:520
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:188
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:171
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:67
#: appPlugins/ToolCopperThieving.py:1318 appPlugins/ToolCopperThieving.py:1600
#: appPlugins/ToolCutOut.py:2433 appPlugins/ToolCutOut.py:2746
#: appPlugins/ToolExtract.py:1380 appPlugins/ToolFiducials.py:1073
#: appPlugins/ToolInvertGerber.py:249 appPlugins/ToolInvertGerber.py:257
#: appPlugins/ToolMilling.py:4454 appPlugins/ToolNCC.py:4365 appPlugins/ToolNCC.py:4469
#: appPlugins/ToolSolderPaste.py:1360
msgid "Margin"
msgstr ""

#: appDatabase.py:644 appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:72
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:58
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:107
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:123
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:136
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:522
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:190 appPlugins/ToolCopperThieving.py:1320
#: appPlugins/ToolFiducials.py:1075 appPlugins/ToolMilling.py:4456
#: appPlugins/ToolNCC.py:4367 appPlugins/ToolNCC.py:4471
msgid "Bounding box margin."
msgstr ""

#: appDatabase.py:655 appDatabase.py:763 appEditors/geo_plugins/GeoPaintPlugin.py:281
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:104
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:105
#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:55
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:546
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:201
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:186 appPlugins/ToolExtract.py:1141
#: appPlugins/ToolLevelling.py:1904 appPlugins/ToolMilling.py:4482
#: appPlugins/ToolNCC.py:4342 appPlugins/ToolPaint.py:3180
#: appPlugins/ToolPunchGerber.py:2136
msgid "Method"
msgstr ""

#: appDatabase.py:657 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:203
#: appPlugins/ToolNCC.py:4344
msgid ""
"Algorithm for copper clearing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""

#: appDatabase.py:665 appDatabase.py:777 appEditors/geo_plugins/GeoPaintPlugin.py:295
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:556
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolMilling.py:4492
#: appPlugins/ToolNCC.py:4357 appPlugins/ToolPaint.py:3194
msgid "Standard"
msgstr ""

#: appDatabase.py:665 appDatabase.py:777 appEditors/geo_plugins/GeoPaintPlugin.py:89
#: appEditors/geo_plugins/GeoPaintPlugin.py:180 appEditors/geo_plugins/GeoPaintPlugin.py:295
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:556
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolMilling.py:4492
#: appPlugins/ToolNCC.py:4357 appPlugins/ToolPaint.py:3194
msgid "Seed"
msgstr ""

#: appDatabase.py:665 appDatabase.py:777 appEditors/geo_plugins/GeoPaintPlugin.py:185
#: appEditors/geo_plugins/GeoPaintPlugin.py:295
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:556
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appParsers/ParseGerber.py:446
#: appParsers/ParseHPGL2.py:200 appPlugins/ToolImage.py:745 appPlugins/ToolMilling.py:4492
#: appPlugins/ToolNCC.py:4357 appPlugins/ToolPaint.py:3194
msgid "Lines"
msgstr ""

#: appDatabase.py:665 appDatabase.py:777 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:216
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolNCC.py:4357
#: appPlugins/ToolPaint.py:3194
msgid "Combo"
msgstr ""

#: appDatabase.py:673 appDatabase.py:788 appEditors/geo_plugins/GeoPaintPlugin.py:302
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:633
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:223
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:212 appPlugins/ToolLevelling.py:1123
#: appPlugins/ToolLevelling.py:1145 appPlugins/ToolLevelling.py:1993
#: appPlugins/ToolLevelling.py:2016 appPlugins/ToolMilling.py:4385
#: appPlugins/ToolNCC.py:4378 appPlugins/ToolNCC.py:4482 appPlugins/ToolPaint.py:3205
msgid "Connect"
msgstr ""

#: appDatabase.py:677 appDatabase.py:791 appEditors/geo_plugins/GeoPaintPlugin.py:304
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:636
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:225
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:214 appPlugins/ToolMilling.py:4388
#: appPlugins/ToolNCC.py:4382 appPlugins/ToolNCC.py:4484 appPlugins/ToolPaint.py:3208
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""

#: appDatabase.py:683 appDatabase.py:795 appEditors/geo_plugins/GeoPaintPlugin.py:312
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:232
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:219 appPlugins/ToolNCC.py:4388
#: appPlugins/ToolNCC.py:4490 appPlugins/ToolPaint.py:3212
msgid "Contour"
msgstr ""

#: appDatabase.py:687 appDatabase.py:798 appEditors/geo_plugins/GeoPaintPlugin.py:314
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:234
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:221 appPlugins/ToolNCC.py:4392
#: appPlugins/ToolNCC.py:4492 appPlugins/ToolPaint.py:3215
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""

#: appDatabase.py:693 appDatabase.py:748 appEditors/AppGerberEditor.py:6787
#: appEditors/appGCodeEditor.py:812 appEditors/exc_plugins/ExcCopyPlugin.py:297
#: appEditors/exc_plugins/ExcCopyPlugin.py:374 appEditors/exc_plugins/ExcCopyPlugin.py:387
#: appEditors/geo_plugins/GeoCopyPlugin.py:295 appEditors/geo_plugins/GeoCopyPlugin.py:372
#: appEditors/geo_plugins/GeoCopyPlugin.py:385
#: appEditors/geo_plugins/GeoTransformationPlugin.py:603 appGUI/ObjectUI.py:138
#: appGUI/ObjectUI.py:990 appGUI/ObjectUI.py:1388
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:107
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:121
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:134
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:241
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:217
#: appPlugins/ToolEtchCompensation.py:453 appPlugins/ToolMarkers.py:1337
#: appPlugins/ToolMarkers.py:1364 appPlugins/ToolMarkers.py:1377
#: appPlugins/ToolMarkers.py:1606 appPlugins/ToolMarkers.py:1611 appPlugins/ToolNCC.py:4398
#: appPlugins/ToolNCC.py:4498 appPlugins/ToolPaint.py:3165 appPlugins/ToolPaint.py:3262
#: appPlugins/ToolTransform.py:568 appPlugins/ToolTransform.py:877
msgid "Offset"
msgstr ""

#: appDatabase.py:697 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:243
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:253 appPlugins/ToolNCC.py:4402
#: appPlugins/ToolNCC.py:4500
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features."
msgstr ""

#: appDatabase.py:750 appEditors/geo_plugins/GeoPaintPlugin.py:269
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:173 appPlugins/ToolPaint.py:3167
#: appPlugins/ToolPaint.py:3264
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""

#: appDatabase.py:765 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:188
#: appPlugins/ToolPaint.py:3182
msgid ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines.\n"
"- Laser-lines: Active only for Gerber objects.\n"
"Will create lines that follow the traces.\n"
"- Combo: In case of failure a new method will be picked from the above\n"
"in the order specified."
msgstr ""

#: appDatabase.py:777 appDatabase.py:779
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:205 appPlugins/ToolPaint.py:120
#: appPlugins/ToolPaint.py:394 appPlugins/ToolPaint.py:3194 appPlugins/ToolPaint.py:3196
msgid "Laser_lines"
msgstr ""

#: appDatabase.py:814 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:165
#: appPlugins/ToolIsolation.py:3671
msgid "Passes"
msgstr ""

#: appDatabase.py:816 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:167
#: appPlugins/ToolIsolation.py:3673
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""

#: appDatabase.py:829 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:191
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:534 appPlugins/ToolIsolation.py:3699
#: appPlugins/ToolMilling.py:4469
msgid "How much (percentage) of the tool width to overlap each tool pass."
msgstr ""

#: appDatabase.py:862 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:222
#: appPlugins/ToolIsolation.py:3732
msgid "Isolation Type"
msgstr ""

#: appDatabase.py:864 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:224
#: appPlugins/ToolIsolation.py:3734
msgid ""
"Choose how the isolation will be executed:\n"
"- 'Full' -> complete isolation of polygons\n"
"- 'Ext' -> will isolate only on the outside\n"
"- 'Int' -> will isolate only on the inside\n"
"'Exterior' isolation is almost always possible\n"
"(with the right tool) but 'Interior'\n"
"isolation can be done only when there is an opening\n"
"inside of the polygon (e.g polygon is a 'doughnut' shape)."
msgstr ""

#: appDatabase.py:873 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:233 appPlugins/ToolIsolation.py:3743
msgid "Full"
msgstr ""

#: appDatabase.py:874 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:234
#: appPlugins/ToolIsolation.py:3744
msgid "Ext"
msgstr ""

#: appDatabase.py:875 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:235
#: appPlugins/ToolIsolation.py:3745
msgid "Int"
msgstr ""

#: appDatabase.py:891 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:56
#: appPlugins/ToolDrilling.py:2516 appPlugins/ToolMilling.py:1430
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""

#: appDatabase.py:907 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:288
#: appPlugins/ToolDrilling.py:2667
msgid "Offset Z"
msgstr ""

#: appDatabase.py:909 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:290
#: appPlugins/ToolDrilling.py:2669
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""

#: appDatabase.py:926 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:87
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:73
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:103 appPlugins/ToolCutOut.py:2409
#: appPlugins/ToolDrilling.py:2534 appPlugins/ToolMilling.py:4570
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."
msgstr ""

#: appDatabase.py:948 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:99
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:85
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:114 appPlugins/ToolCutOut.py:2420
#: appPlugins/ToolDrilling.py:2547 appPlugins/ToolMilling.py:4583
msgid "Depth of each pass (positive)."
msgstr ""

#: appDatabase.py:957 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:95
#: appPlugins/ToolDrilling.py:1562 appPlugins/ToolDrilling.py:2558
#: appPlugins/ToolMilling.py:3598 appPlugins/ToolMilling.py:4594
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""

#: appDatabase.py:980 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:156
#: appPlugins/ToolDrilling.py:2575 appPlugins/ToolMilling.py:4630
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."
msgstr ""

#: appDatabase.py:995 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:322
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:326
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:171
#: appPlugins/ToolDrilling.py:2590 appPlugins/ToolMilling.py:4645
#: appPlugins/ToolSolderPaste.py:1500
msgid "Feedrate Rapids"
msgstr ""

#: appDatabase.py:997 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:324
#: appPlugins/ToolDrilling.py:2592 appPlugins/ToolMilling.py:4647
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""

#: appDatabase.py:1020 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:171
#: appPlugins/ToolDrilling.py:1580 appPlugins/ToolDrilling.py:2614
#: appPlugins/ToolMilling.py:3616 appPlugins/ToolMilling.py:4700
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""

#: appDatabase.py:1065 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:239
#: appPlugins/ToolDrilling.py:2683
msgid "Drill slots"
msgstr ""

#: appDatabase.py:1067 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:241
#: appPlugins/ToolDrilling.py:2685
msgid "If the selected tool has slots then they will be drilled."
msgstr ""

#: appDatabase.py:1078 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:256
#: appPlugins/ToolDrilling.py:2693
msgid "How much (percentage) of the tool diameter to overlap previous drill hole."
msgstr ""

#: appDatabase.py:1092 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:246
#: appPlugins/ToolDrilling.py:2707
msgid "Last drill"
msgstr ""

#: appDatabase.py:1094 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:248
#: appPlugins/ToolDrilling.py:2709
msgid ""
"If the slot length is not completely covered by drill holes,\n"
"add a drill hole on the slot end point."
msgstr ""

#: appDatabase.py:1120 appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:298
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:124
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:310 appPlugins/ToolCutOut.py:2435
#: appPlugins/ToolCutOut.py:2748 appPlugins/ToolExtract.py:1382
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""

#: appDatabase.py:1132
msgid "Gap size"
msgstr ""

#: appDatabase.py:1134 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:152
#: appPlugins/ToolCutOut.py:2458
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""

#: appDatabase.py:1143
msgid "Gap type"
msgstr ""

#: appDatabase.py:1145 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:169
#: appPlugins/ToolCutOut.py:2474
msgid ""
"The type of gap:\n"
"- Bridge -> the cutout will be interrupted by bridges\n"
"- Thin -> same as 'bridge' but it will be thinner by partially milling the gap\n"
"- M-Bites -> 'Mouse Bites' - same as 'bridge' but covered with drill holes"
msgstr ""

#: appDatabase.py:1153 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:176
#: appPlugins/ToolCutOut.py:2489 appPlugins/ToolCutOut.py:2540
msgid "Bridge"
msgstr ""

#: appDatabase.py:1154 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:176
#: appPlugins/ToolCutOut.py:2489
msgid "Thin"
msgstr ""

#: appDatabase.py:1165 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:187
#: appPlugins/ToolCutOut.py:2495
msgid "Depth"
msgstr ""

#: appDatabase.py:1167 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:189
#: appPlugins/ToolCutOut.py:2497
msgid ""
"The depth until the milling is done\n"
"in order to thin the gaps."
msgstr ""

#: appDatabase.py:1183 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:208
#: appPlugins/ToolCutOut.py:2511
msgid "The drill hole diameter when doing mouse bites."
msgstr ""

#: appDatabase.py:1194 appEditors/exc_plugins/ExcCopyPlugin.py:296
#: appEditors/geo_plugins/GeoCopyPlugin.py:294
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:169
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:208
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:247
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:218
#: appPlugins/ToolCopperThieving.py:1462 appPlugins/ToolCopperThieving.py:1508
#: appPlugins/ToolCopperThieving.py:1554 appPlugins/ToolCutOut.py:2521
msgid "Spacing"
msgstr ""

#: appDatabase.py:1196 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:220
#: appPlugins/ToolCutOut.py:2523
msgid "The spacing between drill holes when doing mouse bites."
msgstr ""

#: appDatabase.py:1215 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:59
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:198 appPlugins/ToolCutOut.py:2378
#: appPlugins/ToolFilm.py:1521
msgid "Convex Shape"
msgstr ""

#: appDatabase.py:1218 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:61
#: appPlugins/ToolCutOut.py:2380 appPlugins/ToolCutOut.py:2385
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""

#: appDatabase.py:1226 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:137
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:234 appPlugins/ToolCutOut.py:2442
#: appPlugins/ToolCutOut.py:2561 appPlugins/ToolCutOut.py:2660
msgid "Gaps"
msgstr ""

#: appDatabase.py:1228 appPlugins/ToolCutOut.py:2563
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""

#: appDatabase.py:1265
msgid "Add Tool in DB"
msgstr ""

#: appDatabase.py:1268
msgid ""
"Add a new tool in the Tools Database.\n"
"It will be used in the Geometry UI.\n"
"You can edit it after it is added."
msgstr ""

#: appDatabase.py:1282
msgid "Delete Tool from DB"
msgstr ""

#: appDatabase.py:1285
msgid "Remove a selection of tools in the Tools Database."
msgstr ""

#: appDatabase.py:1289
msgid "Export DB"
msgstr ""

#: appDatabase.py:1292
msgid "Save the Tools Database to a custom text file."
msgstr ""

#: appDatabase.py:1296
msgid "Import DB"
msgstr ""

#: appDatabase.py:1299
msgid "Load the Tools Database information's from a custom text file."
msgstr ""

#: appDatabase.py:1303
msgid "Save DB"
msgstr ""

#: appDatabase.py:1306
msgid "Save the Tools Database information's."
msgstr ""

#: appDatabase.py:1310
msgid "Transfer the Tool"
msgstr ""

#: appDatabase.py:1312
msgid ""
"Insert a new tool in the Tools Table of the\n"
"object/application tool after selecting a tool\n"
"in the Tools Database."
msgstr ""

#: appDatabase.py:1318 appEditors/AppTextEditor.py:368 appGUI/GUIElements.py:2772
#: appGUI/GUIElements.py:2842 appGUI/GUIElements.py:2903 appGUI/GUIElements.py:2968
#: appGUI/GUIElements.py:4502 appGUI/MainGUI.py:1733
#: appGUI/preferences/PreferencesUIManager.py:1153
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:418 appMain.py:2766 appMain.py:4052
#: appMain.py:5014 appMain.py:5277 appMain.py:10261 appMain.py:12021
msgid "Cancel"
msgstr ""

#: appDatabase.py:1331 appDatabase.py:1342 appEditors/AppExcEditor.py:5314
#: appEditors/AppExcEditor.py:5325 appEditors/appGCodeEditor.py:900
#: appEditors/appGCodeEditor.py:911 appEditors/exc_plugins/ExcCopyPlugin.py:454
#: appEditors/exc_plugins/ExcCopyPlugin.py:463
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:329
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:338
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:395
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:404
#: appEditors/geo_plugins/GeoCopyPlugin.py:452 appEditors/geo_plugins/GeoCopyPlugin.py:461
#: appGUI/ObjectUI.py:158 appGUI/ObjectUI.py:169 appPlugins/ToolAlignObjects.py:541
#: appPlugins/ToolAlignObjects.py:552 appPlugins/ToolCalculators.py:1055
#: appPlugins/ToolCalculators.py:1066 appPlugins/ToolCopperThieving.py:1759
#: appPlugins/ToolCopperThieving.py:1770 appPlugins/ToolCutOut.py:2805
#: appPlugins/ToolCutOut.py:2816 appPlugins/ToolDblSided.py:1134
#: appPlugins/ToolDblSided.py:1145 appPlugins/ToolDistance.py:999
#: appPlugins/ToolDistance.py:1010 appPlugins/ToolDrilling.py:3021
#: appPlugins/ToolDrilling.py:3032 appPlugins/ToolEtchCompensation.py:498
#: appPlugins/ToolEtchCompensation.py:509 appPlugins/ToolExtract.py:1439
#: appPlugins/ToolExtract.py:1450 appPlugins/ToolFiducials.py:1206
#: appPlugins/ToolFiducials.py:1217 appPlugins/ToolFilm.py:1850 appPlugins/ToolFilm.py:1861
#: appPlugins/ToolFollow.py:777 appPlugins/ToolFollow.py:788
#: appPlugins/ToolInvertGerber.py:306 appPlugins/ToolInvertGerber.py:317
#: appPlugins/ToolIsolation.py:4005 appPlugins/ToolIsolation.py:4016
#: appPlugins/ToolLevelling.py:2333 appPlugins/ToolLevelling.py:2344
#: appPlugins/ToolMarkers.py:1621 appPlugins/ToolMarkers.py:1632
#: appPlugins/ToolMilling.py:5080 appPlugins/ToolMilling.py:5091 appPlugins/ToolNCC.py:4714
#: appPlugins/ToolNCC.py:4725 appPlugins/ToolObjectDistance.py:623
#: appPlugins/ToolObjectDistance.py:634 appPlugins/ToolOptimal.py:704
#: appPlugins/ToolOptimal.py:715 appPlugins/ToolPaint.py:3414 appPlugins/ToolPaint.py:3425
#: appPlugins/ToolPanelize.py:1438 appPlugins/ToolPanelize.py:1449
#: appPlugins/ToolPcbWizard.py:514 appPlugins/ToolPcbWizard.py:525
#: appPlugins/ToolPunchGerber.py:2391 appPlugins/ToolPunchGerber.py:2402
#: appPlugins/ToolQRCode.py:1008 appPlugins/ToolQRCode.py:1019
#: appPlugins/ToolRulesCheck.py:1853 appPlugins/ToolRulesCheck.py:1864
#: appPlugins/ToolSolderPaste.py:1752 appPlugins/ToolSolderPaste.py:1763
#: appPlugins/ToolSub.py:959 appPlugins/ToolSub.py:970 appPlugins/ToolTransform.py:1049
#: appPlugins/ToolTransform.py:1060 appTool.py:333 appTool.py:344
msgid "Edited value is out of range"
msgstr ""

#: appDatabase.py:1337 appDatabase.py:1344 appEditors/AppExcEditor.py:5320
#: appEditors/AppExcEditor.py:5327 appEditors/appGCodeEditor.py:906
#: appEditors/appGCodeEditor.py:913 appGUI/ObjectUI.py:164 appGUI/ObjectUI.py:171
#: appPlugins/ToolAlignObjects.py:547 appPlugins/ToolAlignObjects.py:554
#: appPlugins/ToolCalculators.py:1061 appPlugins/ToolCalculators.py:1068
#: appPlugins/ToolCopperThieving.py:1765 appPlugins/ToolCopperThieving.py:1772
#: appPlugins/ToolCutOut.py:2811 appPlugins/ToolCutOut.py:2818
#: appPlugins/ToolDblSided.py:1140 appPlugins/ToolDblSided.py:1147
#: appPlugins/ToolDistance.py:1005 appPlugins/ToolDistance.py:1012
#: appPlugins/ToolDrilling.py:3027 appPlugins/ToolDrilling.py:3034
#: appPlugins/ToolEtchCompensation.py:504 appPlugins/ToolEtchCompensation.py:511
#: appPlugins/ToolExtract.py:1445 appPlugins/ToolExtract.py:1452
#: appPlugins/ToolFiducials.py:1212 appPlugins/ToolFiducials.py:1219
#: appPlugins/ToolFilm.py:1856 appPlugins/ToolFilm.py:1863 appPlugins/ToolFollow.py:783
#: appPlugins/ToolFollow.py:790 appPlugins/ToolInvertGerber.py:312
#: appPlugins/ToolInvertGerber.py:319 appPlugins/ToolIsolation.py:4011
#: appPlugins/ToolIsolation.py:4018 appPlugins/ToolLevelling.py:2339
#: appPlugins/ToolLevelling.py:2346 appPlugins/ToolMarkers.py:1627
#: appPlugins/ToolMarkers.py:1634 appPlugins/ToolMilling.py:5086
#: appPlugins/ToolMilling.py:5093 appPlugins/ToolNCC.py:4720 appPlugins/ToolNCC.py:4727
#: appPlugins/ToolObjectDistance.py:629 appPlugins/ToolObjectDistance.py:636
#: appPlugins/ToolOptimal.py:710 appPlugins/ToolOptimal.py:717 appPlugins/ToolPaint.py:3420
#: appPlugins/ToolPaint.py:3427 appPlugins/ToolPanelize.py:1444
#: appPlugins/ToolPanelize.py:1451 appPlugins/ToolPcbWizard.py:520
#: appPlugins/ToolPcbWizard.py:527 appPlugins/ToolPunchGerber.py:2397
#: appPlugins/ToolPunchGerber.py:2404 appPlugins/ToolQRCode.py:1014
#: appPlugins/ToolQRCode.py:1021 appPlugins/ToolRulesCheck.py:1859
#: appPlugins/ToolRulesCheck.py:1866 appPlugins/ToolSolderPaste.py:1758
#: appPlugins/ToolSolderPaste.py:1765 appPlugins/ToolSub.py:965 appPlugins/ToolSub.py:972
#: appPlugins/ToolTransform.py:1055 appPlugins/ToolTransform.py:1062 appTool.py:339
#: appTool.py:346
msgid "Edited value is within limits."
msgstr ""

#: appDatabase.py:1593
msgid "Sort by Target"
msgstr ""

#: appDatabase.py:1597
msgid "Sort by Diameter"
msgstr ""

#: appDatabase.py:1602
msgid "Add to DB"
msgstr ""

#: appDatabase.py:1605
msgid "Copy from DB"
msgstr ""

#: appDatabase.py:1608
msgid "Delete from DB"
msgstr ""

#: appDatabase.py:1613 appMain.py:4041 appMain.py:10249 appTranslation.py:216
msgid "Save changes"
msgstr ""

#: appDatabase.py:1717 appDatabase.py:2204 appDatabase.py:2656 appDatabase.py:2668
#: appGUI/MainGUI.py:543 appMain.py:6667 appMain.py:6704 appMain.py:6791 appMain.py:6803
#: appMain.py:6812 appMain.py:6822 appPlugins/ToolCutOut.py:557 appPlugins/ToolCutOut.py:578
#: appPlugins/ToolCutOut.py:615 appPlugins/ToolIsolation.py:2974
#: appPlugins/ToolIsolation.py:2984 appPlugins/ToolIsolation.py:3064
#: appPlugins/ToolMilling.py:2245 appPlugins/ToolNCC.py:3912 appPlugins/ToolNCC.py:3922
#: appPlugins/ToolNCC.py:3998 appPlugins/ToolPaint.py:2786 appPlugins/ToolPaint.py:2796
#: appPlugins/ToolPaint.py:2881
msgid "Tools Database"
msgstr ""

#: appDatabase.py:1736 appDatabase.py:2190 appPlugins/ToolCutOut.py:452
#: appPlugins/ToolDrilling.py:1148 appPlugins/ToolIsolation.py:1359
#: appPlugins/ToolMilling.py:2086 appPlugins/ToolNCC.py:1213 appPlugins/ToolPaint.py:858
msgid "Failed to parse Tools DB file."
msgstr ""

#: appDatabase.py:1739 appDatabase.py:2193
msgid "Loaded Tools DB from"
msgstr ""

#: appDatabase.py:2040
msgid "Tool added to DB."
msgstr ""

#: appDatabase.py:2073
msgid "Tool copied from Tools DB."
msgstr ""

#: appDatabase.py:2107
msgid "Tool removed from Tools DB."
msgstr ""

#: appDatabase.py:2120
msgid "Export Tools Database"
msgstr ""

#: appDatabase.py:2122
msgid "Tools_Database"
msgstr ""

#: appDatabase.py:2159 appDatabase.py:2162 appDatabase.py:2265
msgid "Failed to write Tools DB to file."
msgstr ""

#: appDatabase.py:2165
msgid "Exported Tools DB to"
msgstr ""

#: appDatabase.py:2172
msgid "Import FlatCAM Tools DB"
msgstr ""

#: appDatabase.py:2269
msgid "Saved Tools DB."
msgstr ""

#: appDatabase.py:2476
msgid "To change tool properties select only one tool. Tools currently selected"
msgstr ""

#: appDatabase.py:2632
msgid "No Tool/row selected in the Tools Database table"
msgstr ""

#: appDatabase.py:2636 appPlugins/ToolDrilling.py:1152
msgid "Tools DB empty."
msgstr ""

#: appDatabase.py:2663
msgid "Tools in Tools Database edited but not saved."
msgstr ""

#: appDatabase.py:2672
msgid "Cancelled adding tool from DB."
msgstr ""

#: appEditors/AppExcEditor.py:248 appEditors/AppExcEditor.py:306
#: appEditors/AppExcEditor.py:535 appEditors/AppExcEditor.py:970
#: appEditors/AppExcEditor.py:1029 appEditors/AppExcEditor.py:1351
#: appEditors/AppGerberEditor.py:248 appEditors/AppGerberEditor.py:255
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:345
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:410
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:430
msgid "Click to place ..."
msgstr ""

#: appEditors/AppExcEditor.py:256
msgid "To add a drill first select a tool"
msgstr ""

#: appEditors/AppExcEditor.py:270 appEditors/AppExcEditor.py:289
msgid "Drill"
msgstr ""

#: appEditors/AppExcEditor.py:370 appEditors/AppExcEditor.py:815
#: appEditors/AppExcEditor.py:1168 appEditors/AppExcEditor.py:1729
#: appEditors/AppExcEditor.py:2163 appEditors/AppExcEditor.py:2323
#: appEditors/AppExcEditor.py:2522 appEditors/AppExcEditor.py:3687
#: appEditors/AppExcEditor.py:4511 appEditors/AppExcEditor.py:4518
#: appEditors/AppExcEditor.py:5003 appEditors/AppGeoEditor.py:723
#: appEditors/AppGeoEditor.py:968 appEditors/AppGeoEditor.py:1122
#: appEditors/AppGeoEditor.py:1319 appEditors/AppGeoEditor.py:1528
#: appEditors/AppGeoEditor.py:1867 appEditors/AppGeoEditor.py:1981
#: appEditors/AppGeoEditor.py:2321 appEditors/AppGeoEditor.py:2785
#: appEditors/AppGeoEditor.py:2855 appEditors/AppGeoEditor.py:2881
#: appEditors/AppGeoEditor.py:2909 appEditors/AppGeoEditor.py:3049
#: appEditors/AppGeoEditor.py:4233 appEditors/AppGeoEditor.py:4247
#: appEditors/AppGeoEditor.py:4968 appEditors/AppGeoEditor.py:5021
#: appEditors/AppGeoEditor.py:5084 appEditors/AppGeoEditor.py:5110
#: appEditors/AppGeoEditor.py:5135 appEditors/AppGeoEditor.py:5167
#: appEditors/AppGerberEditor.py:390 appEditors/AppGerberEditor.py:814
#: appEditors/AppGerberEditor.py:941 appEditors/AppGerberEditor.py:1253
#: appEditors/AppGerberEditor.py:1514 appEditors/AppGerberEditor.py:1724
#: appEditors/AppGerberEditor.py:2014 appEditors/AppGerberEditor.py:2310
#: appEditors/AppGerberEditor.py:2391 appEditors/AppGerberEditor.py:2538
#: appEditors/AppGerberEditor.py:3249 appEditors/AppGerberEditor.py:5022
#: appEditors/AppGerberEditor.py:5327 appEditors/AppGerberEditor.py:5345
#: appEditors/AppGerberEditor.py:5813 appEditors/AppGerberEditor.py:5996
#: appEditors/AppGerberEditor.py:6058 appEditors/AppGerberEditor.py:6105
#: appEditors/AppGerberEditor.py:7484 appEditors/AppGerberEditor.py:7646
#: appEditors/AppGerberEditor.py:7648 appEditors/AppGerberEditor.py:7719
#: appEditors/geo_plugins/GeoBufferPlugin.py:201
#: appEditors/geo_plugins/GeoBufferPlugin.py:267
#: appEditors/geo_plugins/GeoBufferPlugin.py:335
#: appEditors/geo_plugins/GeoPaintPlugin.py:214
#: appEditors/geo_plugins/GeoSimplificationPlugin.py:118
#: appEditors/geo_plugins/GeoTransformationPlugin.py:326
#: appEditors/geo_plugins/GeoTransformationPlugin.py:457
#: appEditors/geo_plugins/GeoTransformationPlugin.py:459
#: appEditors/geo_plugins/GeoTransformationPlugin.py:515 appGUI/MainGUI.py:3546
#: appGUI/MainGUI.py:3581 appGUI/MainGUI.py:4089 appMain.py:5787 appMain.py:5912
#: appObjects/GeometryObject.py:543 appObjects/GeometryObject.py:1229
#: appObjects/GeometryObject.py:1308 appObjects/GerberObject.py:427
#: appParsers/ParseGerber.py:2205 appParsers/ParseGerber.py:2299
#: appParsers/ParseGerber.py:2374 appParsers/ParseGerber.py:2448
#: appParsers/ParseGerber.py:2510 appPlugins/ToolAlignObjects.py:276
#: appPlugins/ToolAlignObjects.py:298 appPlugins/ToolCalculators.py:332
#: appPlugins/ToolCalculators.py:342 appPlugins/ToolCutOut.py:1493
#: appPlugins/ToolDistance.py:374 appPlugins/ToolDistance.py:401
#: appPlugins/ToolDistance.py:633 appPlugins/ToolFiducials.py:673
#: appPlugins/ToolFiducials.py:688 appPlugins/ToolFollow.py:322 appPlugins/ToolFollow.py:390
#: appPlugins/ToolIsolation.py:1608 appPlugins/ToolMarkers.py:1065
#: appPlugins/ToolMove.py:244 appPlugins/ToolObjectDistance.py:427
#: appPlugins/ToolPaint.py:2315 appPlugins/ToolPanelize.py:1094
#: appPlugins/ToolSolderPaste.py:926 tclCommands/TclCommandPanelize.py:430
#: tclCommands/TclCommandPanelize.py:440 tclCommands/TclCommandSetOrigin.py:113
msgid "Done."
msgstr ""

#: appEditors/AppExcEditor.py:451 appEditors/AppExcEditor.py:464
#: appEditors/AppExcEditor.py:802 appEditors/AppExcEditor.py:1261
#: appEditors/AppExcEditor.py:1274 appEditors/AppExcEditor.py:1716
#: appEditors/AppExcEditor.py:2843 appEditors/AppExcEditor.py:2857
#: appEditors/AppGeoEditor.py:686 appEditors/AppGeoEditor.py:689
#: appEditors/AppGeoEditor.py:1217 appEditors/AppGeoEditor.py:1225
#: appEditors/AppGeoEditor.py:1423 appEditors/AppGeoEditor.py:1437
#: appEditors/AppGeoEditor.py:1636 appEditors/AppGeoEditor.py:1650
#: appEditors/AppGeoEditor.py:2172 appEditors/AppGeoEditor.py:2186
#: appEditors/AppGeoEditor.py:2688 appEditors/AppGeoEditor.py:2702
#: appEditors/AppGerberEditor.py:801 appEditors/AppGerberEditor.py:3923
#: appEditors/AppGerberEditor.py:5992 appEditors/geo_plugins/GeoCirclePlugin.py:99
#: appEditors/geo_plugins/GeoRectanglePlugin.py:102
#: appEditors/geo_plugins/GeoSimplificationPlugin.py:104 appMain.py:5321 appMain.py:5931
#: appMain.py:9213 appMain.py:10644 appMain.py:10771 appMain.py:12252 appMain.py:12266
#: appMain.py:12276 appMain.py:12293 appObjects/CNCJobObject.py:842
#: appPlugins/ToolCopperThieving.py:337 appPlugins/ToolCopperThieving.py:932
#: appPlugins/ToolCopperThieving.py:1144 appPlugins/ToolCutOut.py:750
#: appPlugins/ToolCutOut.py:773 appPlugins/ToolCutOut.py:905 appPlugins/ToolCutOut.py:1159
#: appPlugins/ToolCutOut.py:1310 appPlugins/ToolCutOut.py:1429 appPlugins/ToolCutOut.py:1447
#: appPlugins/ToolCutOut.py:1461 appPlugins/ToolDblSided.py:586
#: appPlugins/ToolDblSided.py:599 appPlugins/ToolDrilling.py:2013
#: appPlugins/ToolExtract.py:424 appPlugins/ToolExtract.py:790 appPlugins/ToolExtract.py:839
#: appPlugins/ToolExtract.py:848 appPlugins/ToolExtract.py:852
#: appPlugins/ToolFiducials.py:352 appPlugins/ToolFiducials.py:626
#: appPlugins/ToolFiducials.py:682 appPlugins/ToolFiducials.py:697
#: appPlugins/ToolFilm.py:1019 appPlugins/ToolImage.py:274 appPlugins/ToolImage.py:336
#: appPlugins/ToolIsolation.py:1513 appPlugins/ToolMarkers.py:375
#: appPlugins/ToolMarkers.py:398 appPlugins/ToolMarkers.py:406 appPlugins/ToolMarkers.py:430
#: appPlugins/ToolMarkers.py:901 appPlugins/ToolMarkers.py:1017
#: appPlugins/ToolMarkers.py:1026 appPlugins/ToolMarkers.py:1063 appPlugins/ToolMove.py:195
#: appPlugins/ToolPaint.py:2309 appPlugins/ToolSolderPaste.py:824
#: appPlugins/ToolSolderPaste.py:1151 camlib.py:1224 camlib.py:2464 camlib.py:2537
#: camlib.py:2605 camlib.py:2677 camlib.py:2680 camlib.py:5554 camlib.py:5973
msgid "Failed."
msgstr ""

#: appEditors/AppExcEditor.py:543
msgid "To add an Drill Array first select a tool in Tool Table"
msgstr ""

#: appEditors/AppExcEditor.py:556 appEditors/AppExcEditor.py:574
msgid "Drill Array"
msgstr ""

#: appEditors/AppExcEditor.py:621 appEditors/AppExcEditor.py:1446
msgid "Click on the Circular Array Start position"
msgstr ""

#: appEditors/AppExcEditor.py:796 appEditors/AppExcEditor.py:1688
#: appEditors/AppGerberEditor.py:796
msgid "Too many items for the selected spacing angle."
msgstr ""

#: appEditors/AppExcEditor.py:978
msgid "To add a slot first select a tool"
msgstr ""

#: appEditors/AppExcEditor.py:994 appEditors/AppExcEditor.py:1012
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:161
msgid "Slot"
msgstr ""

#: appEditors/AppExcEditor.py:1359
msgid "To add an Slot Array first select a tool in Tool Table"
msgstr ""

#: appEditors/AppExcEditor.py:1373 appEditors/AppExcEditor.py:1390
msgid "Slot Array"
msgstr ""

#: appEditors/AppExcEditor.py:1917 appEditors/AppExcEditor.py:1930
#: appEditors/exc_plugins/ExcResizePlugin.py:143
#: appEditors/exc_plugins/ExcResizePlugin.py:158
msgid "Resize"
msgstr ""

#: appEditors/AppExcEditor.py:1948
msgid "Click on the Drill(s) to resize ..."
msgstr ""

#: appEditors/AppExcEditor.py:1988
msgid "Resize drill(s) failed. Please enter a diameter for resize."
msgstr ""

#: appEditors/AppExcEditor.py:2165
msgid "Nothing selected"
msgstr ""

#: appEditors/AppExcEditor.py:2275 appEditors/AppExcEditor.py:2286 appGUI/MainGUI.py:3836
#: appGUI/MainGUI.py:3922 appGUI/MainGUI.py:3969 appGUI/MainGUI.py:4098
#: appGUI/MainGUI.py:4214 appGUI/MainGUI.py:4244
msgid "Cancelled. Nothing selected."
msgstr ""

#: appEditors/AppExcEditor.py:2279 appEditors/AppExcEditor.py:2431
#: appEditors/AppGeoEditor.py:1903 appEditors/AppGeoEditor.py:1952
#: appEditors/AppGeoEditor.py:2241 appEditors/AppGeoEditor.py:2292
#: appEditors/AppGerberEditor.py:2194 appEditors/exc_plugins/ExcCopyPlugin.py:468
#: appEditors/exc_plugins/ExcCopyPlugin.py:490 appEditors/exc_plugins/ExcCopyPlugin.py:499
#: appEditors/geo_plugins/GeoCopyPlugin.py:466 appEditors/geo_plugins/GeoCopyPlugin.py:488
#: appEditors/geo_plugins/GeoCopyPlugin.py:497
msgid "Click on reference location ..."
msgstr ""

#: appEditors/AppExcEditor.py:2291 appEditors/AppExcEditor.py:2463
#: appEditors/AppGerberEditor.py:481 appEditors/AppGerberEditor.py:2192
#: appEditors/AppGerberEditor.py:2222 appGUI/MainGUI.py:4237
msgid "Click on target location ..."
msgstr ""

#: appEditors/AppExcEditor.py:2426 appEditors/geo_plugins/GeoBufferPlugin.py:141
#: appEditors/geo_plugins/GeoBufferPlugin.py:218
#: appEditors/geo_plugins/GeoBufferPlugin.py:286
#: appEditors/geo_plugins/GeoPaintPlugin.py:133 appMain.py:5931
msgid "Nothing selected."
msgstr ""

#: appEditors/AppExcEditor.py:2436 appEditors/AppExcEditor.py:2440
#: appEditors/AppGeoEditor.py:2247 appEditors/AppGeoEditor.py:2250 appGUI/GUIElements.py:455
#: appGUI/GUIElements.py:1234 appGUI/GUIElements.py:1478 appGUI/GUIElements.py:1919
#: appGUI/GUIElements.py:2207 appGUI/GUIElements.py:4559 appGUI/MainGUI.py:464
#: appGUI/MainGUI.py:811 appGUI/MainGUI.py:870 appGUI/MainGUI.py:951 appGUI/MainGUI.py:1094
#: appGUI/MainGUI.py:1240 appGUI/MainGUI.py:1346 appGUI/MainGUI.py:1923
#: appGUI/MainGUI.py:2490 appGUI/MainGUI.py:2634 appGUI/MainGUI.py:2732
#: appGUI/MainGUI.py:5418 appGUI/MainGUI.py:5557 appObjects/ExcellonObject.py:516
#: appPlugins/ToolDrilling.py:287 appPlugins/ToolMilling.py:402
#: appPlugins/ToolMilling.py:413 appPlugins/ToolPanelize.py:445
#: appPlugins/ToolPanelize.py:474 appPlugins/ToolPanelize.py:600
#: appPlugins/ToolPanelize.py:611 appPlugins/ToolPanelize.py:649
#: appPlugins/ToolPanelize.py:698 appPlugins/ToolPanelize.py:912
#: appPlugins/ToolPanelize.py:951 appPlugins/ToolPanelize.py:999
msgid "Copy"
msgstr ""

#: appEditors/AppExcEditor.py:2447 appEditors/AppGeoEditor.py:1919
#: appEditors/AppGeoEditor.py:2257
msgid "Click on destination point ..."
msgstr ""

#: appEditors/AppExcEditor.py:2458
msgid " Nothing selected."
msgstr ""

#: appEditors/AppExcEditor.py:3090 appEditors/AppGeoEditor.py:3635
#: appEditors/AppGerberEditor.py:3503 appEditors/AppGerberEditor.py:6321
#: appEditors/AppGerberEditor.py:6612 appGUI/GUIElements.py:469 appGUI/GUIElements.py:1248
#: appGUI/GUIElements.py:1492 appGUI/GUIElements.py:1931 appGUI/GUIElements.py:2217
#: appGUI/GUIElements.py:4564 appGUI/MainGUI.py:470 appGUI/MainGUI.py:755
#: appGUI/MainGUI.py:814 appGUI/MainGUI.py:873 appGUI/MainGUI.py:953 appGUI/MainGUI.py:1096
#: appGUI/MainGUI.py:1242 appGUI/MainGUI.py:1303 appGUI/MainGUI.py:1348
#: appGUI/MainGUI.py:1925 appGUI/MainGUI.py:2492 appGUI/MainGUI.py:2636
#: appGUI/MainGUI.py:2688 appGUI/MainGUI.py:2734 appGUI/MainGUI.py:5327
#: appGUI/MainGUI.py:5427 appGUI/MainGUI.py:5568
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:396 appMain.py:7266
#: appPlugins/ToolDrilling.py:291 appPlugins/ToolIsolation.py:212
#: appPlugins/ToolMilling.py:405 appPlugins/ToolMilling.py:417 appPlugins/ToolNCC.py:213
#: appPlugins/ToolPaint.py:209 appPlugins/ToolSolderPaste.py:124
msgid "Delete"
msgstr ""

#: appEditors/AppExcEditor.py:3313 appObjects/ExcellonObject.py:385
#: appPlugins/ToolDrilling.py:750 appPlugins/ToolMilling.py:1183
#: appPlugins/ToolMilling.py:4057
msgid "Total Drills"
msgstr ""

#: appEditors/AppExcEditor.py:3345 appObjects/ExcellonObject.py:419
#: appPlugins/ToolDrilling.py:777 appPlugins/ToolMilling.py:1210
#: appPlugins/ToolMilling.py:4081
msgid "Total Slots"
msgstr ""

#: appEditors/AppExcEditor.py:3423 appEditors/AppGeoEditor.py:5472
#: appEditors/AppGerberEditor.py:4273 appEditors/appGCodeEditor.py:609
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:184 appObjects/CNCJobObject.py:603
#: appObjects/DocumentObject.py:190 appObjects/ExcellonObject.py:219
#: appObjects/GeometryObject.py:458 appObjects/GerberObject.py:226
#: appObjects/ScriptObject.py:177 appPlugins/ToolCutOut.py:289
#: appPlugins/ToolDblSided.py:209 appPlugins/ToolDrilling.py:539
#: appPlugins/ToolFiducials.py:209 appPlugins/ToolFilm.py:259 appPlugins/ToolFollow.py:163
#: appPlugins/ToolIsolation.py:453 appPlugins/ToolLevelling.py:385
#: appPlugins/ToolMarkers.py:226 appPlugins/ToolMilling.py:690 appPlugins/ToolNCC.py:402
#: appPlugins/ToolPaint.py:424 appPlugins/ToolPanelize.py:269
#: appPlugins/ToolPunchGerber.py:407 appPlugins/ToolQRCode.py:184 appPlugins/ToolSub.py:225
msgid "Beginner"
msgstr ""

#: appEditors/AppExcEditor.py:3434 appEditors/AppGeoEditor.py:5485
#: appEditors/AppGerberEditor.py:4286 appEditors/appGCodeEditor.py:622
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:185 appObjects/CNCJobObject.py:613
#: appObjects/DocumentObject.py:199 appObjects/ExcellonObject.py:236
#: appObjects/GeometryObject.py:467 appObjects/GerberObject.py:241
#: appObjects/ScriptObject.py:186 appPlugins/ToolCutOut.py:325
#: appPlugins/ToolDblSided.py:223 appPlugins/ToolDrilling.py:582
#: appPlugins/ToolFiducials.py:224 appPlugins/ToolFilm.py:276 appPlugins/ToolFollow.py:175
#: appPlugins/ToolIsolation.py:510 appPlugins/ToolLevelling.py:400
#: appPlugins/ToolMarkers.py:244 appPlugins/ToolMilling.py:751 appPlugins/ToolNCC.py:440
#: appPlugins/ToolPaint.py:449 appPlugins/ToolPanelize.py:281
#: appPlugins/ToolPunchGerber.py:419 appPlugins/ToolQRCode.py:198 appPlugins/ToolSub.py:236
msgid "Advanced"
msgstr ""

#: appEditors/AppExcEditor.py:3457 appObjects/GeometryObject.py:719
#: appObjects/GeometryObject.py:1378 appPlugins/ToolDrilling.py:1778
#: appPlugins/ToolIsolation.py:1501 appPlugins/ToolIsolation.py:1991
#: appPlugins/ToolMilling.py:2318 appPlugins/ToolMilling.py:3091
#: appPlugins/ToolMilling.py:3864 appPlugins/ToolNCC.py:1402 appPlugins/ToolNCC.py:1540
#: appPlugins/ToolPaint.py:1024 appPlugins/ToolPaint.py:1162 appPlugins/ToolPaint.py:1872
#: appPlugins/ToolSolderPaste.py:550 appPlugins/ToolSolderPaste.py:622
msgid "Wrong value format entered, use a number."
msgstr ""

#: appEditors/AppExcEditor.py:3468
msgid ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""

#: appEditors/AppExcEditor.py:3476 appGUI/MainGUI.py:4280
msgid "Added new tool with dia"
msgstr ""

#: appEditors/AppExcEditor.py:3510
msgid "Select a tool in Tool Table"
msgstr ""

#: appEditors/AppExcEditor.py:3540
msgid "Deleted tool with diameter"
msgstr ""

#: appEditors/AppExcEditor.py:4302
msgid "There are no Tools definitions in the file. Aborting Excellon creation."
msgstr ""

#: appEditors/AppExcEditor.py:4306 appEditors/AppGerberEditor.py:5002 appMain.py:6747
#: appMain.py:8800 appMain.py:11511 appMain.py:11582 appMain.py:11778 appMain.py:11843
#: appObjects/AppObject.py:170 appObjects/GeometryObject.py:661
#: appParsers/ParseExcellon.py:976 appPlugins/ToolMilling.py:3025
#: appPlugins/ToolPcbWizard.py:343 appPlugins/ToolSolderPaste.py:1005
msgid "An internal error has occurred. See shell.\n"
msgstr ""

#: appEditors/AppExcEditor.py:4311 appObjects/GeometryObject.py:966
#: appObjects/GeometryObject.py:971 appObjects/GeometryObject.py:1129
#: appPlugins/ToolMilling.py:3494 appPlugins/ToolMilling.py:3498 appPlugins/ToolSub.py:468
#: appPlugins/ToolSub.py:663
msgid "Generating"
msgstr ""

#: appEditors/AppExcEditor.py:4333
msgid "Excellon editing finished."
msgstr ""

#: appEditors/AppExcEditor.py:4349
msgid "Cancelled. There is no Tool/Drill selected"
msgstr ""

#: appEditors/AppExcEditor.py:5172 appGUI/MainGUI.py:786 appGUI/ObjectUI.py:626
msgid "Excellon Editor"
msgstr ""

#: appEditors/AppExcEditor.py:5182 appEditors/AppGeoEditor.py:5258
#: appEditors/AppGerberEditor.py:6168 appEditors/appGCodeEditor.py:782 appGUI/ObjectUI.py:72
#: appPlugins/ToolCutOut.py:2242 appPlugins/ToolDblSided.py:704
#: appPlugins/ToolDrilling.py:2384 appPlugins/ToolFiducials.py:912
#: appPlugins/ToolFilm.py:1251 appPlugins/ToolFollow.py:680 appPlugins/ToolIsolation.py:3376
#: appPlugins/ToolLevelling.py:1746 appPlugins/ToolMarkers.py:1241
#: appPlugins/ToolMilling.py:3931 appPlugins/ToolNCC.py:4045 appPlugins/ToolPaint.py:2928
#: appPlugins/ToolPanelize.py:1145 appPlugins/ToolPunchGerber.py:2012
#: appPlugins/ToolQRCode.py:736 appPlugins/ToolSub.py:785
msgid ""
"Beginner Mode - many parameters are hidden.\n"
"Advanced Mode - full control.\n"
"Permanent change is done in 'Preferences' menu."
msgstr ""

#: appEditors/AppExcEditor.py:5196 appEditors/AppGerberEditor.py:6180
#: appEditors/appGCodeEditor.py:794
msgid "Name:"
msgstr ""

#: appEditors/AppExcEditor.py:5203 appGUI/ObjectUI.py:275 appGUI/ObjectUI.py:658
#: appGUI/ObjectUI.py:946 appGUI/ObjectUI.py:958 appGUI/ObjectUI.py:1342
#: appPlugins/ToolDrilling.py:2425 appPlugins/ToolIsolation.py:3410
#: appPlugins/ToolMilling.py:4002 appPlugins/ToolNCC.py:4107 appPlugins/ToolPaint.py:2990
#: appPlugins/ToolSolderPaste.py:1277
msgid "Tools Table"
msgstr ""

#: appEditors/AppExcEditor.py:5205
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""

#: appEditors/AppExcEditor.py:5226
msgid "Convert Slots"
msgstr ""

#: appEditors/AppExcEditor.py:5230
msgid "Convert the slots in the selected tools to drills."
msgstr ""

#: appEditors/AppExcEditor.py:5240
msgid "Add/Delete Tool"
msgstr ""

#: appEditors/AppExcEditor.py:5242
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""

#: appEditors/AppExcEditor.py:5254 appEditors/geo_plugins/GeoPaintPlugin.py:235
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:44
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:127 appPlugins/ToolCutOut.py:2323
#: appPlugins/ToolCutOut.py:2509 appPlugins/ToolIsolation.py:3482
#: appPlugins/ToolMilling.py:4193 appPlugins/ToolNCC.py:4193 appPlugins/ToolNCC.py:4206
#: appPlugins/ToolPaint.py:3069
msgid "Tool Dia"
msgstr ""

#: appEditors/AppExcEditor.py:5256
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:55
#: appPlugins/ToolIsolation.py:3484 appPlugins/ToolMilling.py:4195
#: appPlugins/ToolNCC.py:4195
msgid "Diameter for the new tool"
msgstr ""

#: appEditors/AppExcEditor.py:5268 appEditors/AppGerberEditor.py:6314
#: appEditors/AppGerberEditor.py:6834 appEditors/exc_plugins/ExcCopyPlugin.py:436
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:315
#: appEditors/exc_plugins/ExcDrillPlugin.py:191
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:378
#: appEditors/exc_plugins/ExcSlotPlugin.py:255 appEditors/geo_plugins/GeoCirclePlugin.py:128
#: appEditors/geo_plugins/GeoCirclePlugin.py:257 appEditors/geo_plugins/GeoCopyPlugin.py:434
#: appEditors/geo_plugins/GeoRectanglePlugin.py:161
#: appEditors/geo_plugins/GeoRectanglePlugin.py:316
#: appEditors/geo_plugins/GeoTransformationPlugin.py:648
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:388
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:340 appMain.py:7264
#: appPlugins/ToolCopperThieving.py:1714 appPlugins/ToolDblSided.py:918
#: appPlugins/ToolLevelling.py:2074 appPlugins/ToolNCC.py:207 appPlugins/ToolPaint.py:203
#: appPlugins/ToolSolderPaste.py:121 appPlugins/ToolTransform.py:623
msgid "Add"
msgstr ""

#: appEditors/AppExcEditor.py:5271
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""

#: appEditors/AppExcEditor.py:5280
msgid "Delete Tool"
msgstr ""

#: appEditors/AppExcEditor.py:5283
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""

#: appEditors/AppExcEditor.py:5297 appEditors/AppGeoEditor.py:5440
#: appEditors/AppGerberEditor.py:6769 appEditors/appGCodeEditor.py:74
#: appEditors/appGCodeEditor.py:75 appEditors/appGCodeEditor.py:889 appGUI/MainGUI.py:393
#: appGUI/MainGUI.py:1929 appMain.py:2755
msgid "Exit Editor"
msgstr ""

#: appEditors/AppExcEditor.py:5300 appEditors/AppGeoEditor.py:5443
#: appEditors/AppGerberEditor.py:6772 appEditors/appGCodeEditor.py:892
#: appGUI/MainGUI.py:1088 appGUI/MainGUI.py:2484
msgid "Exit from Editor."
msgstr ""

#: appEditors/AppGeoEditor.py:117 appEditors/AppGeoEditor.py:3456
msgid "Geo Elem"
msgstr ""

#: appEditors/AppGeoEditor.py:461 appEditors/AppGeoEditor.py:713
#: appEditors/geo_plugins/GeoCirclePlugin.py:112
#: appEditors/geo_plugins/GeoCirclePlugin.py:158 appGUI/MainGUI.py:1838
msgid "Circle"
msgstr ""

#: appEditors/AppGeoEditor.py:482 appEditors/AppGeoEditor.py:753
#: appEditors/AppGerberEditor.py:1667 appEditors/AppGerberEditor.py:1750
#: appEditors/geo_plugins/GeoCirclePlugin.py:88
msgid "Click on Center point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:515
msgid "Click on Center point to add a new circle or Apply to change the selection."
msgstr ""

#: appEditors/AppGeoEditor.py:525 appEditors/AppGerberEditor.py:1677
msgid "Click on Perimeter point to complete ..."
msgstr ""

#: appEditors/AppGeoEditor.py:528
msgid "Click on Perimeter point to set axis major ..."
msgstr ""

#: appEditors/AppGeoEditor.py:536
msgid "Click on Perimeter point to set axis minor ..."
msgstr ""

#: appEditors/AppGeoEditor.py:781 appEditors/AppGerberEditor.py:1799
msgid "Click on Start point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:783 appEditors/AppGerberEditor.py:1801
msgid "Click on Point3 ..."
msgstr ""

#: appEditors/AppGeoEditor.py:785 appEditors/AppGerberEditor.py:1803
msgid "Click on Stop point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:790 appEditors/AppGerberEditor.py:1808
msgid "Click on Stop point to complete ..."
msgstr ""

#: appEditors/AppGeoEditor.py:792 appEditors/AppGerberEditor.py:1810
msgid "Click on Point2 to complete ..."
msgstr ""

#: appEditors/AppGeoEditor.py:794 appEditors/AppGerberEditor.py:1812
msgid "Click on Center point to complete ..."
msgstr ""

#: appEditors/AppGeoEditor.py:806 appEditors/AppGerberEditor.py:1824
#: appEditors/AppGerberEditor.py:6685 appEditors/AppGerberEditor.py:6739
#: appEditors/exc_plugins/ExcCopyPlugin.py:229 appEditors/exc_plugins/ExcCopyPlugin.py:411
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:217
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:276
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:191
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:281
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:340
#: appEditors/exc_plugins/ExcSlotPlugin.py:200 appEditors/geo_plugins/GeoCopyPlugin.py:227
#: appEditors/geo_plugins/GeoCopyPlugin.py:409
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:201
msgid "Direction"
msgstr ""

#: appEditors/AppGeoEditor.py:820 appEditors/AppGerberEditor.py:1838
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:823 appEditors/AppGerberEditor.py:1841
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr ""

#: appEditors/AppGeoEditor.py:826 appEditors/AppGerberEditor.py:1844
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:967 appGUI/MainGUI.py:1842
msgid "Arc"
msgstr ""

#: appEditors/AppGeoEditor.py:990 appEditors/AppGeoEditor.py:1113
#: appEditors/geo_plugins/GeoRectanglePlugin.py:145
#: appEditors/geo_plugins/GeoRectanglePlugin.py:191 appGUI/MainGUI.py:1835
msgid "Rectangle"
msgstr ""

#: appEditors/AppGeoEditor.py:1011 appEditors/AppGeoEditor.py:1283
#: appEditors/AppGeoEditor.py:1395 appEditors/geo_plugins/GeoRectanglePlugin.py:90
msgid "Click on 1st corner ..."
msgstr ""

#: appEditors/AppGeoEditor.py:1043
msgid "Click on 1st corner to add a new rectangle or Apply to change the selection."
msgstr ""

#: appEditors/AppGeoEditor.py:1049
msgid "Click on opposite corner to complete ..."
msgstr ""

#: appEditors/AppGeoEditor.py:1234 appEditors/AppGeoEditor.py:1445
#: appEditors/AppGeoEditor.py:1658
msgid "Projected"
msgstr ""

#: appEditors/AppGeoEditor.py:1235
msgid "Click to complete ..."
msgstr ""

#: appEditors/AppGeoEditor.py:1262 appGUI/MainGUI.py:1840
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:450
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:336
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:470
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:327
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:291 appPlugins/ToolDrilling.py:2962
#: appPlugins/ToolFollow.py:740 appPlugins/ToolIsolation.py:3954
#: appPlugins/ToolMilling.py:5022 appPlugins/ToolNCC.py:4569 appPlugins/ToolPaint.py:3326
msgid "Polygon"
msgstr ""

#: appEditors/AppGeoEditor.py:1393 appEditors/AppGeoEditor.py:1598
#: appEditors/AppGerberEditor.py:1270 appEditors/AppGerberEditor.py:1524
msgid "Backtracked one point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:1494 appEditors/AppGeoEditor.py:1600
#: appEditors/AppGeoEditor.py:2743 appEditors/AppGerberEditor.py:1019
msgid "Click on 1st point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:1716
msgid "Selection not allowed. Wait ..."
msgstr ""

#: appEditors/AppGeoEditor.py:1821 appEditors/AppGeoEditor.py:1900
#: appEditors/AppGeoEditor.py:1945 appEditors/AppGeoEditor.py:2238
#: appEditors/AppGeoEditor.py:2285 appEditors/AppGeoEditor.py:2833
#: appEditors/AppGeoEditor.py:2859 appEditors/AppGeoEditor.py:2885
#: appEditors/AppGeoEditor.py:4540 appEditors/AppGerberEditor.py:7261
#: appEditors/AppGerberEditor.py:7301 appEditors/AppGerberEditor.py:7324
#: appEditors/AppGerberEditor.py:7469 appEditors/AppGerberEditor.py:7502
#: appEditors/AppGerberEditor.py:7545 appEditors/AppGerberEditor.py:7586
#: appEditors/AppGerberEditor.py:7622 appEditors/AppGerberEditor.py:7658
#: appEditors/geo_plugins/GeoPaintPlugin.py:103
#: appEditors/geo_plugins/GeoTransformationPlugin.py:130
#: appEditors/geo_plugins/GeoTransformationPlugin.py:155
#: appEditors/geo_plugins/GeoTransformationPlugin.py:178
#: appEditors/geo_plugins/GeoTransformationPlugin.py:318
#: appEditors/geo_plugins/GeoTransformationPlugin.py:343
#: appEditors/geo_plugins/GeoTransformationPlugin.py:378
#: appEditors/geo_plugins/GeoTransformationPlugin.py:413
#: appEditors/geo_plugins/GeoTransformationPlugin.py:444
#: appEditors/geo_plugins/GeoTransformationPlugin.py:469
msgid "No shape selected."
msgstr ""

#: appEditors/AppGeoEditor.py:1900 appEditors/AppGeoEditor.py:1945
#: appEditors/AppGeoEditor.py:2238 appEditors/AppGeoEditor.py:2285
msgid "Select some shapes or cancel."
msgstr ""

#: appEditors/AppGeoEditor.py:1909 appEditors/AppGeoEditor.py:1912 appGUI/MainGUI.py:760
#: appGUI/MainGUI.py:820 appGUI/MainGUI.py:878 appGUI/MainGUI.py:1246 appGUI/MainGUI.py:1353
#: appGUI/MainGUI.py:1872 appGUI/MainGUI.py:1938 appGUI/MainGUI.py:2640
#: appGUI/MainGUI.py:2739 appGUI/MainGUI.py:5421 appGUI/MainGUI.py:5561
#: appPlugins/ToolMove.py:20
msgid "Move"
msgstr ""

#: appEditors/AppGeoEditor.py:1969 appPlugins/ToolMove.py:192
msgid "Moving"
msgstr ""

#: appEditors/AppGeoEditor.py:2767
msgid "Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. Error"
msgstr ""

#: appEditors/AppGeoEditor.py:2775
msgid "No text to add."
msgstr ""

#: appEditors/AppGeoEditor.py:2822
msgid "Create buffer geometry ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2826 appEditors/AppGerberEditor.py:6500
#: appEditors/AppGerberEditor.py:6788 appEditors/geo_plugins/GeoBufferPlugin.py:64
#: appEditors/geo_plugins/GeoBufferPlugin.py:345
#: appEditors/geo_plugins/GeoTransformationPlugin.py:604 appGUI/MainGUI.py:763
#: appGUI/MainGUI.py:853 appGUI/MainGUI.py:1333 appGUI/MainGUI.py:1850
#: appGUI/MainGUI.py:1895 appGUI/MainGUI.py:2719 appGUI/MainGUI.py:5556
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:257 appPlugins/ToolTransform.py:569
#: appPlugins/ToolTransform.py:932
msgid "Buffer"
msgstr ""

#: appEditors/AppGeoEditor.py:2845 appEditors/AppGeoEditor.py:2871
#: appEditors/AppGeoEditor.py:2897 appEditors/AppGerberEditor.py:5951
#: appEditors/geo_plugins/GeoBufferPlugin.py:84
#: appEditors/geo_plugins/GeoBufferPlugin.py:101
#: appEditors/geo_plugins/GeoBufferPlugin.py:118
msgid "Buffer distance value is missing or wrong format. Add it and retry."
msgstr ""

#: appEditors/AppGeoEditor.py:2945
msgid "Simplify geometry ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2982 appEditors/AppGerberEditor.py:2407
msgid "Select a shape to act as deletion area ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2984 appEditors/AppGeoEditor.py:3010
#: appEditors/AppGeoEditor.py:3016 appEditors/AppGerberEditor.py:2409
msgid "Click to pick-up the erase shape..."
msgstr ""

#: appEditors/AppGeoEditor.py:3014
msgid "Nothing to erase."
msgstr ""

#: appEditors/AppGeoEditor.py:3020 appEditors/AppGerberEditor.py:2469
msgid "Click to erase ..."
msgstr ""

#: appEditors/AppGeoEditor.py:3099
msgid "Create Paint geometry ..."
msgstr ""

#: appEditors/AppGeoEditor.py:3115 appEditors/AppGerberEditor.py:3268
msgid "Shape transformations ..."
msgstr ""

#: appEditors/AppGeoEditor.py:3445
msgid "Multi-Line"
msgstr ""

#: appEditors/AppGeoEditor.py:3447
msgid "Multi-Polygon"
msgstr ""

#: appEditors/AppGeoEditor.py:3584
msgid "Last selected shape ID"
msgstr ""

#: appEditors/AppGeoEditor.py:3601 appEditors/AppGerberEditor.py:2681
#: appEditors/AppGerberEditor.py:5010 appPlugins/ToolCutOut.py:1485
#: appPlugins/ToolDistance.py:257 appPlugins/ToolExtract.py:434
#: appPlugins/ToolExtract.py:807 appPlugins/ToolExtract.py:882 appPlugins/ToolOptimal.py:216
#: appPlugins/ToolPanelize.py:1102 appPlugins/ToolQRCode.py:235 appPlugins/ToolReport.py:211
#: appPlugins/ToolSolderPaste.py:765 appPlugins/ToolSolderPaste.py:1077
#: appPlugins/ToolSub.py:312 tclCommands/TclCommandOpenSVG.py:85
#: tclCommands/TclCommandPanelize.py:425
msgid "Working"
msgstr ""

#: appEditors/AppGeoEditor.py:3641 appEditors/AppGeoEditor.py:5369
msgid "Change"
msgstr ""

#: appEditors/AppGeoEditor.py:4037
msgid "Error on inserting shapes into storage."
msgstr ""

#: appEditors/AppGeoEditor.py:4126
msgid "Grid Snap enabled."
msgstr ""

#: appEditors/AppGeoEditor.py:4130
msgid "Grid Snap disabled."
msgstr ""

#: appEditors/AppGeoEditor.py:4547 appGUI/MainGUI.py:3915 appGUI/MainGUI.py:3962
#: appGUI/MainGUI.py:3981 appGUI/MainGUI.py:4169 appGUI/MainGUI.py:4207
#: appGUI/MainGUI.py:4220
msgid "Click on target point."
msgstr ""

#: appEditors/AppGeoEditor.py:4820 appEditors/AppGeoEditor.py:4884
#: appEditors/AppGeoEditor.py:4952 appEditors/AppGeoEditor.py:4982
#: appEditors/AppGeoEditor.py:5035 appEditors/AppGeoEditor.py:5090
#: appEditors/AppGeoEditor.py:5118 appEditors/AppGeoEditor.py:5143
#: appEditors/geo_plugins/GeoBufferPlugin.py:127
#: appEditors/geo_plugins/GeoBufferPlugin.py:207
#: appEditors/geo_plugins/GeoBufferPlugin.py:273
#: appEditors/geo_plugins/GeoPaintPlugin.py:123 appPlugins/ToolCopperThieving.py:626
#: appPlugins/ToolFilm.py:692 appPlugins/ToolFilm.py:915 appPlugins/ToolRulesCheck.py:644
msgid "Working..."
msgstr ""

#: appEditors/AppGeoEditor.py:4821
msgid "Loading the Geometry into the Editor..."
msgstr ""

#: appEditors/AppGeoEditor.py:4860
msgid "Editing MultiGeo Geometry, tool"
msgstr ""

#: appEditors/AppGeoEditor.py:4862 appPlugins/ToolNCC.py:2485
msgid "with diameter"
msgstr ""

#: appEditors/AppGeoEditor.py:4931
msgid "Editor Exit. Geometry object was updated ..."
msgstr ""

#: appEditors/AppGeoEditor.py:4987 appEditors/AppGeoEditor.py:5042
msgid "A selection of minimum two items is required to do Intersection."
msgstr ""

#: appEditors/AppGeoEditor.py:5250 appGUI/ObjectUI.py:914
msgid "Geometry Editor"
msgstr ""

#: appEditors/AppGeoEditor.py:5271
msgid "Tool dia"
msgstr ""

#: appEditors/AppGeoEditor.py:5273
msgid "Edited tool diameter."
msgstr ""

#: appEditors/AppGeoEditor.py:5287
msgid "Geometry Table"
msgstr ""

#: appEditors/AppGeoEditor.py:5289
msgid "The list of geometry elements inside the edited object."
msgstr ""

#: appEditors/AppGeoEditor.py:5302 appEditors/AppGerberEditor.py:4599
#: appEditors/AppGerberEditor.py:6206 appEditors/AppGerberEditor.py:6279
#: appEditors/AppGerberEditor.py:6652 appEditors/exc_plugins/ExcCopyPlugin.py:197
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:176
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:241
#: appEditors/geo_plugins/GeoCopyPlugin.py:195
#: appEditors/geo_plugins/GeoRectanglePlugin.py:268 appGUI/ObjectUI.py:322
#: appGUI/ObjectUI.py:1601 appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:56
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:167
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:57
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:116
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:40
#: appPlugins/ToolCopperThieving.py:1367 appPlugins/ToolCutOut.py:2286
#: appPlugins/ToolCutOut.py:2472 appPlugins/ToolDblSided.py:1039
#: appPlugins/ToolExtract.py:1101 appPlugins/ToolFilm.py:1279 appPlugins/ToolFilm.py:1350
#: appPlugins/ToolFilm.py:1420 appPlugins/ToolImage.py:593 appPlugins/ToolIsolation.py:3895
#: appPlugins/ToolMarkers.py:1294 appPlugins/ToolMarkers.py:1556
#: appPlugins/ToolMilling.py:3963 appPlugins/ToolNCC.py:4073 appPlugins/ToolNCC.py:4540
#: appPlugins/ToolObjectDistance.py:461 appPlugins/ToolPaint.py:2956
#: appPlugins/ToolPaint.py:3296 appPlugins/ToolPunchGerber.py:2113
#: appPlugins/ToolPunchGerber.py:2324 appPlugins/ToolTransform.py:630
msgid "Type"
msgstr ""

#: appEditors/AppGeoEditor.py:5325 appEditors/AppGerberEditor.py:6344
msgid "Zoom on selection"
msgstr ""

#: appEditors/AppGeoEditor.py:5329 appEditors/AppGerberEditor.py:6353
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:163
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:225
#: appEditors/exc_plugins/ExcSlotPlugin.py:170
#: appEditors/geo_plugins/GeoSimplificationPlugin.py:225 appGUI/ObjectUI.py:1270
#: appGUI/ObjectUI.py:1585 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:26
#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:28
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:25
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:27
#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:411
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:79
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:25
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:27
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:28
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:29
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:137
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:28
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:27
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:27
#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:27
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:27
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:26
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:28
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:183
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:25
#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:25
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:27
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:28
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:26
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:28
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:27
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:28
#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:24
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:28
#: appPlugins/ToolAlignObjects.py:488 appPlugins/ToolCopperThieving.py:1292
#: appPlugins/ToolDistance.py:832 appPlugins/ToolEtchCompensation.py:385
#: appPlugins/ToolFiducials.py:1044 appPlugins/ToolFilm.py:1510 appPlugins/ToolFollow.py:709
#: appPlugins/ToolImage.py:522 appPlugins/ToolImage.py:854
#: appPlugins/ToolInvertGerber.py:237 appPlugins/ToolLevelling.py:1832
#: appPlugins/ToolMarkers.py:1283 appPlugins/ToolObjectDistance.py:447
#: appPlugins/ToolOptimal.py:504 appPlugins/ToolPanelize.py:1327
#: appPlugins/ToolQRCode.py:794 appPlugins/ToolSolderPaste.py:1347 appPlugins/ToolSub.py:803
#: appPlugins/ToolTransform.py:586
msgid "Parameters"
msgstr ""

#: appEditors/AppGeoEditor.py:5332 appEditors/AppGerberEditor.py:6355
msgid "Geometry parameters."
msgstr ""

#: appEditors/AppGeoEditor.py:5346
msgid "Is Valid"
msgstr ""

#: appEditors/AppGeoEditor.py:5353
msgid "Is Empty"
msgstr ""

#: appEditors/AppGeoEditor.py:5360
msgid "Is Ring"
msgstr ""

#: appEditors/AppGeoEditor.py:5367
msgid "Is CCW"
msgstr ""

#: appEditors/AppGeoEditor.py:5372
msgid ""
"Change the orientation of the geometric element.\n"
"Works for LinearRing and Polygons."
msgstr ""

#: appEditors/AppGeoEditor.py:5380
msgid "Is Simple"
msgstr ""

#: appEditors/AppGeoEditor.py:5387 appEditors/exc_plugins/ExcSlotArrayPlugin.py:177
#: appEditors/exc_plugins/ExcSlotPlugin.py:186
#: appEditors/geo_plugins/GeoRectanglePlugin.py:304
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:185
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:63
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:123
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:68
#: appObjects/AppObjectTemplate.py:942 appPlugins/ToolFilm.py:1356
#: appPlugins/ToolFilm.py:1427 appPlugins/ToolMarkers.py:1322 appPlugins/ToolReport.py:594
msgid "Length"
msgstr ""

#: appEditors/AppGeoEditor.py:5389
msgid "The length of the geometry element."
msgstr ""

#: appEditors/AppGeoEditor.py:5401 appEditors/AppGerberEditor.py:6387
#: appEditors/geo_plugins/GeoSimplificationPlugin.py:192
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:83 appPlugins/ToolDistance.py:863
#: appPlugins/ToolFiducials.py:950 appPlugins/ToolFiducials.py:966
#: appPlugins/ToolMarkers.py:1468 appPlugins/ToolObjectDistance.py:476
msgid "Coordinates"
msgstr ""

#: appEditors/AppGeoEditor.py:5403 appEditors/AppGeoEditor.py:5416
#: appEditors/AppGerberEditor.py:6389 appEditors/AppGerberEditor.py:6395
#: appEditors/geo_plugins/GeoSimplificationPlugin.py:194
#: appEditors/geo_plugins/GeoSimplificationPlugin.py:209
msgid "The coordinates of the selected geometry element."
msgstr ""

#: appEditors/AppGeoEditor.py:5425 appEditors/AppGerberEditor.py:6400
#: appEditors/geo_plugins/GeoSimplificationPlugin.py:214
msgid "Vertex Points"
msgstr ""

#: appEditors/AppGeoEditor.py:5427 appEditors/AppGerberEditor.py:6402
#: appEditors/geo_plugins/GeoSimplificationPlugin.py:216
msgid "The number of vertex points in the selected geometry element."
msgstr ""

#: appEditors/AppGerberEditor.py:212 appEditors/AppGerberEditor.py:418
#: appEditors/AppGerberEditor.py:1347
msgid "You need to preselect a aperture in the Aperture Table that has a size."
msgstr ""

#: appEditors/AppGerberEditor.py:225 appEditors/AppGerberEditor.py:428
msgid "Aperture size is zero. It needs to be greater than zero."
msgstr ""

#: appEditors/AppGerberEditor.py:378 appEditors/AppGerberEditor.py:734
msgid "Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""

#: appEditors/AppGerberEditor.py:500
msgid "Click on the Pad Circular Array Start position"
msgstr ""

#: appEditors/AppGerberEditor.py:535
msgid "The value is not Float. Check for comma instead of dot separator."
msgstr ""

#: appEditors/AppGerberEditor.py:538
msgid "The value is mistyped. Check the value."
msgstr ""

#: appEditors/AppGerberEditor.py:864
msgid "Select shape(s) and then click ..."
msgstr ""

#: appEditors/AppGerberEditor.py:876
msgid "Failed. Nothing selected."
msgstr ""

#: appEditors/AppGerberEditor.py:892
msgid "Failed. Poligonize works only on geometries belonging to the same aperture."
msgstr ""

#: appEditors/AppGerberEditor.py:1017 appEditors/AppGerberEditor.py:1287
#: appEditors/AppGerberEditor.py:1311
msgid "Corner Mode 1: 45 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1275 appEditors/AppGerberEditor.py:1308
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1278 appEditors/AppGerberEditor.py:1305
msgid "Corner Mode 3: 90 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1281 appEditors/AppGerberEditor.py:1302
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1284 appEditors/AppGerberEditor.py:1299
msgid "Corner Mode 5: Free angle ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1379 appEditors/AppGerberEditor.py:1564
#: appEditors/AppGerberEditor.py:1603
msgid "Track Mode 1: 45 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1544 appEditors/AppGerberEditor.py:1598
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1549 appEditors/AppGerberEditor.py:1593
msgid "Track Mode 3: 90 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1554 appEditors/AppGerberEditor.py:1588
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1559 appEditors/AppGerberEditor.py:1583
msgid "Track Mode 5: Free angle ..."
msgstr ""

#: appEditors/AppGerberEditor.py:2035
msgid "Scale the selected Gerber apertures ..."
msgstr ""

#: appEditors/AppGerberEditor.py:2077
msgid "Buffer the selected apertures ..."
msgstr ""

#: appEditors/AppGerberEditor.py:2119
msgid "Mark polygon areas in the edited Gerber ..."
msgstr ""

#: appEditors/AppGerberEditor.py:2185
msgid "Nothing selected to move"
msgstr ""

#: appEditors/AppGerberEditor.py:2861
msgid "Select shapes to import them into the edited object."
msgstr ""

#: appEditors/AppGerberEditor.py:3088 appEditors/AppGerberEditor.py:3170
#: appPlugins/ToolIsolation.py:2531 appPlugins/ToolIsolation.py:2696
#: appPlugins/ToolPaint.py:1263
msgid "Added polygon"
msgstr ""

#: appEditors/AppGerberEditor.py:3090 appEditors/AppGerberEditor.py:3172
#: appPlugins/ToolIsolation.py:2532 appPlugins/ToolIsolation.py:2698
#: appPlugins/ToolPaint.py:1265
msgid "Click to add next polygon or right click to start."
msgstr ""

#: appEditors/AppGerberEditor.py:3093 appEditors/AppGerberEditor.py:3175
#: appPlugins/ToolIsolation.py:2701
msgid "No polygon in selection."
msgstr ""

#: appEditors/AppGerberEditor.py:3777 appEditors/AppGerberEditor.py:3781
msgid "Aperture code value is missing or wrong format. Add it and retry."
msgstr ""

#: appEditors/AppGerberEditor.py:3793
msgid "Aperture size value is missing or wrong format. Add it and retry."
msgstr ""

#: appEditors/AppGerberEditor.py:3812 appEditors/AppGerberEditor.py:3853
msgid "Aperture already in the aperture table."
msgstr ""

#: appEditors/AppGerberEditor.py:3839
msgid ""
"Aperture dimensions value is missing or wrong format. Add it in format (width, height) "
"and retry."
msgstr ""

#: appEditors/AppGerberEditor.py:3860
msgid "Added new aperture with code"
msgstr ""

#: appEditors/AppGerberEditor.py:3895
msgid "Select an aperture in Aperture Table"
msgstr ""

#: appEditors/AppGerberEditor.py:3903
msgid "Select an aperture in Aperture Table -->"
msgstr ""

#: appEditors/AppGerberEditor.py:3921
msgid "Deleted aperture with code"
msgstr ""

#: appEditors/AppGerberEditor.py:3991
msgid "Dimensions need two float values separated by comma."
msgstr ""

#: appEditors/AppGerberEditor.py:4000
msgid "Dimensions edited."
msgstr ""

#: appEditors/AppGerberEditor.py:4134 appEditors/AppGerberEditor.py:6438
#: appEditors/geo_plugins/GeoSimplificationPlugin.py:97
#: appEditors/geo_plugins/GeoSimplificationPlugin.py:251 appGUI/MainGUI.py:1269
#: appGUI/ObjectUI.py:1147 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:76
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:299 appObjects/GeometryObject.py:521
#: appPlugins/ToolIsolation.py:3823
msgid "Simplify"
msgstr ""

#: appEditors/AppGerberEditor.py:4599 appEditors/AppGerberEditor.py:6206
#: appEditors/AppGerberEditor.py:6251 appGUI/ObjectUI.py:322 appPlugins/ToolExtract.py:1101
#: appPlugins/ToolPunchGerber.py:2113
msgid "Code"
msgstr ""

#: appEditors/AppGerberEditor.py:4599 appEditors/AppGerberEditor.py:6206
#: appEditors/exc_plugins/ExcCopyPlugin.py:187
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:191
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:255
#: appEditors/geo_plugins/GeoCopyPlugin.py:185
#: appEditors/geo_plugins/GeoRectanglePlugin.py:292
#: appEditors/geo_plugins/GeoTextPlugin.py:252 appGUI/ObjectUI.py:322
#: appGUI/ObjectUI.py:1619 appGUI/preferences/general/GeneralAPPSetGroupUI.py:110
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:195
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:234
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:40
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:150
#: appPlugins/ToolCopperThieving.py:1495 appPlugins/ToolCopperThieving.py:1541
#: appPlugins/ToolCutOut.py:2456 appPlugins/ToolExtract.py:1101
#: appPlugins/ToolFiducials.py:1057 appPlugins/ToolPunchGerber.py:2113
msgid "Size"
msgstr ""

#: appEditors/AppGerberEditor.py:4599 appEditors/AppGerberEditor.py:6206
#: appGUI/ObjectUI.py:322
msgid "Dim"
msgstr ""

#: appEditors/AppGerberEditor.py:4718 appMain.py:8254 appObjects/CNCJobObject.py:779
#: appObjects/ScriptObject.py:131 appPlugins/ToolLevelling.py:1500
msgid "Loading"
msgstr ""

#: appEditors/AppGerberEditor.py:4858
msgid "Setting up the UI"
msgstr ""

#: appEditors/AppGerberEditor.py:4859
msgid "Adding geometry finished. Preparing the GUI"
msgstr ""

#: appEditors/AppGerberEditor.py:4868
msgid "Finished loading the Gerber object into the editor."
msgstr ""

#: appEditors/AppGerberEditor.py:5000
msgid "There are no Aperture definitions in the file. Aborting Gerber creation."
msgstr ""

#: appEditors/AppGerberEditor.py:5038
msgid "No aperture is selected."
msgstr ""

#: appEditors/AppGerberEditor.py:5259 appMain.py:7637 appMain.py:7659
#: appObjects/ExcellonObject.py:552 appPlugins/ToolDrilling.py:1698
#: appPlugins/ToolMilling.py:3784
msgid "Copied to clipboard."
msgstr ""

#: appEditors/AppGerberEditor.py:5625 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:366
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:340
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:305 appMain.py:5374
#: appObjects/AppObject.py:353 appObjects/AppObjectTemplate.py:187
#: appObjects/AppObjectTemplate.py:361 appObjects/AppObjectTemplate.py:392
#: appObjects/AppObjectTemplate.py:408 appObjects/CNCJobObject.py:685
#: appObjects/GerberObject.py:1039 appPlugins/ToolCopperThieving.py:1155
#: appPlugins/ToolFiducials.py:706 appPlugins/ToolMarkers.py:1077 appPlugins/ToolMove.py:163
#: appPlugins/ToolQRCode.py:539
msgid "Plotting"
msgstr ""

#: appEditors/AppGerberEditor.py:5805
msgid "Failed. No aperture geometry is selected."
msgstr ""

#: appEditors/AppGerberEditor.py:5899 appEditors/exc_plugins/ExcCopyPlugin.py:507
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:350
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:414
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:434
#: appEditors/geo_plugins/GeoCopyPlugin.py:505
msgid "Click on the circular array Center position"
msgstr ""

#: appEditors/AppGerberEditor.py:5980
msgid "No aperture to buffer. Select at least one aperture and try again."
msgstr ""

#: appEditors/AppGerberEditor.py:6011
msgid "Scale factor value is missing or wrong format. Add it and retry."
msgstr ""

#: appEditors/AppGerberEditor.py:6043
msgid "No aperture to scale. Select at least one aperture and try again."
msgstr ""

#: appEditors/AppGerberEditor.py:6095
msgid "Polygons marked."
msgstr ""

#: appEditors/AppGerberEditor.py:6097
msgid "No polygons were marked. None fit within the limits."
msgstr ""

#: appEditors/AppGerberEditor.py:6160 appGUI/MainGUI.py:825 appGUI/MainGUI.py:1875
#: appGUI/ObjectUI.py:244
msgid "Gerber Editor"
msgstr ""

#: appEditors/AppGerberEditor.py:6193 appGUI/ObjectUI.py:287
#: appObjects/AppObjectTemplate.py:549 appPlugins/ToolReport.py:174
msgid "Apertures"
msgstr ""

#: appEditors/AppGerberEditor.py:6195 appGUI/ObjectUI.py:289
msgid "Apertures Table for the Gerber Object."
msgstr ""

#: appEditors/AppGerberEditor.py:6211 appGUI/ObjectUI.py:326
msgid "Index"
msgstr ""

#: appEditors/AppGerberEditor.py:6213 appGUI/ObjectUI.py:328 appPlugins/ToolExtract.py:1108
#: appPlugins/ToolPunchGerber.py:2120
msgid "Aperture Code"
msgstr ""

#: appEditors/AppGerberEditor.py:6215 appGUI/ObjectUI.py:330 appPlugins/ToolExtract.py:1110
#: appPlugins/ToolPunchGerber.py:2122
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr ""

#: appEditors/AppGerberEditor.py:6217 appGUI/ObjectUI.py:332 appPlugins/ToolExtract.py:1112
#: appPlugins/ToolPunchGerber.py:2124
msgid "Aperture Size:"
msgstr ""

#: appEditors/AppGerberEditor.py:6219 appGUI/ObjectUI.py:334
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""

#: appEditors/AppGerberEditor.py:6244
msgid "Add/Delete Aperture"
msgstr ""

#: appEditors/AppGerberEditor.py:6246
msgid "Add/Delete an aperture in the aperture table"
msgstr ""

#: appEditors/AppGerberEditor.py:6252
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:59
msgid "Code for the new aperture"
msgstr ""

#: appEditors/AppGerberEditor.py:6262
msgid "Size:"
msgstr ""

#: appEditors/AppGerberEditor.py:6264
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""

#: appEditors/AppGerberEditor.py:6281
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""

#: appEditors/AppGerberEditor.py:6294
msgid "Dims"
msgstr ""

#: appEditors/AppGerberEditor.py:6296
msgid ""
"Dimensions for the new aperture.\n"
"The format is (width, height)"
msgstr ""

#: appEditors/AppGerberEditor.py:6318
msgid "Add a new aperture to the aperture list."
msgstr ""

#: appEditors/AppGerberEditor.py:6327
msgid "Delete a aperture in the aperture list"
msgstr ""

#: appEditors/AppGerberEditor.py:6362
msgid "Valid"
msgstr ""

#: appEditors/AppGerberEditor.py:6364
msgid "Show if the selected polygon is valid."
msgstr ""

#: appEditors/AppGerberEditor.py:6371
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:83
#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:124
#: appPlugins/ToolCalculators.py:685 appPlugins/ToolCalculators.py:729
#: appPlugins/ToolCopperThieving.py:1332
msgid "Area"
msgstr ""

#: appEditors/AppGerberEditor.py:6373
msgid "Show the area of the selected polygon."
msgstr ""

#: appEditors/AppGerberEditor.py:6377
#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:46
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:198
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:45
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:41
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:102 appPlugins/ToolCalculators.py:538
#: appPlugins/ToolCopperThieving.py:1344 appPlugins/ToolImage.py:567
#: appPlugins/ToolPcbWizard.py:479
msgid "mm"
msgstr ""

#: appEditors/AppGerberEditor.py:6377 appPlugins/ToolCopperThieving.py:1346
#: appPlugins/ToolCopperThieving.py:1707 appPlugins/ToolImage.py:567
msgid "in"
msgstr ""

#: appEditors/AppGerberEditor.py:6416 appEditors/geo_plugins/GeoSimplificationPlugin.py:167
#: appGUI/MainGUI.py:767 appGUI/MainGUI.py:1848 appGUI/ObjectUI.py:1095
msgid "Simplification"
msgstr ""

#: appEditors/AppGerberEditor.py:6418 appGUI/ObjectUI.py:1097
msgid "Simplify a geometry by reducing its vertex points number."
msgstr ""

#: appEditors/AppGerberEditor.py:6423 appEditors/geo_plugins/GeoSimplificationPlugin.py:237
#: appGUI/ObjectUI.py:1133 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:85
msgid "Tolerance"
msgstr ""

#: appEditors/AppGerberEditor.py:6425 appEditors/geo_plugins/GeoSimplificationPlugin.py:239
#: appGUI/ObjectUI.py:1135 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:301
#: appPlugins/ToolIsolation.py:3825
msgid ""
"All points in the simplified object will be\n"
"within the tolerance distance of the original geometry."
msgstr ""

#: appEditors/AppGerberEditor.py:6441 appEditors/geo_plugins/GeoSimplificationPlugin.py:254
#: appGUI/ObjectUI.py:1150
msgid "Simplify a geometry element by reducing its vertex points number."
msgstr ""

#: appEditors/AppGerberEditor.py:6458
msgid "Buffer Aperture"
msgstr ""

#: appEditors/AppGerberEditor.py:6460
msgid "Buffer a aperture in the aperture list"
msgstr ""

#: appEditors/AppGerberEditor.py:6473 appEditors/geo_plugins/GeoBufferPlugin.py:372
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:226
msgid "Buffer distance"
msgstr ""

#: appEditors/AppGerberEditor.py:6477 appEditors/geo_plugins/GeoBufferPlugin.py:375
msgid "Buffer corner"
msgstr ""

#: appEditors/AppGerberEditor.py:6479
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square': the corner is met in a sharp angle.\n"
" - 'Beveled': the corner is a line that directly connects the features meeting in the "
"corner"
msgstr ""

#: appEditors/AppGerberEditor.py:6485 appEditors/geo_plugins/GeoBufferPlugin.py:383
#: appEditors/geo_plugins/GeoRectanglePlugin.py:276
msgid "Round"
msgstr ""

#: appEditors/AppGerberEditor.py:6486 appEditors/geo_plugins/GeoBufferPlugin.py:384
#: appEditors/geo_plugins/GeoRectanglePlugin.py:277
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:59
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:188
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:77
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:59
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:185
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:140
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:449
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:335
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:469
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:326
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290 appPlugins/ToolDrilling.py:2961
#: appPlugins/ToolExtract.py:1073 appPlugins/ToolExtract.py:1218
#: appPlugins/ToolFollow.py:739 appPlugins/ToolInvertGerber.py:272
#: appPlugins/ToolIsolation.py:3953 appPlugins/ToolMilling.py:5021
#: appPlugins/ToolNCC.py:4568 appPlugins/ToolPaint.py:3325
#: appPlugins/ToolPunchGerber.py:2085 appPlugins/ToolPunchGerber.py:2251
#: appPlugins/ToolQRCode.py:894
msgid "Square"
msgstr ""

#: appEditors/AppGerberEditor.py:6487 appEditors/geo_plugins/GeoBufferPlugin.py:385
#: appEditors/geo_plugins/GeoRectanglePlugin.py:278
msgid "Beveled"
msgstr ""

#: appEditors/AppGerberEditor.py:6516
msgid "Scale Aperture"
msgstr ""

#: appEditors/AppGerberEditor.py:6518
msgid "Scale a aperture in the aperture list"
msgstr ""

#: appEditors/AppGerberEditor.py:6526
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:251
msgid "Scale factor"
msgstr ""

#: appEditors/AppGerberEditor.py:6528
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""

#: appEditors/AppGerberEditor.py:6544 appEditors/AppGerberEditor.py:6785
#: appEditors/geo_plugins/GeoTransformationPlugin.py:601 appGUI/MainGUI.py:856
#: appGUI/MainGUI.py:1335 appGUI/MainGUI.py:1897 appGUI/MainGUI.py:2721
#: appGUI/MainGUI.py:5565 appGUI/ObjectUI.py:121
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:42
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:171 appPlugins/ToolFilm.py:1342
#: appPlugins/ToolTransform.py:566 appPlugins/ToolTransform.py:781
msgid "Scale"
msgstr ""

#: appEditors/AppGerberEditor.py:6565
msgid "Mark polygons"
msgstr ""

#: appEditors/AppGerberEditor.py:6567
msgid "Mark the polygon areas."
msgstr ""

#: appEditors/AppGerberEditor.py:6576
msgid "Area UPPER threshold"
msgstr ""

#: appEditors/AppGerberEditor.py:6578
msgid ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 10000.0000"
msgstr ""

#: appEditors/AppGerberEditor.py:6589
msgid "Area LOWER threshold"
msgstr ""

#: appEditors/AppGerberEditor.py:6591
msgid ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 10000.0000"
msgstr ""

#: appEditors/AppGerberEditor.py:6605
msgid "Mark"
msgstr ""

#: appEditors/AppGerberEditor.py:6608
msgid "Mark the polygons that fit within limits."
msgstr ""

#: appEditors/AppGerberEditor.py:6615
msgid "Delete all the marked polygons."
msgstr ""

#: appEditors/AppGerberEditor.py:6622
msgid "Clear all the markings."
msgstr ""

#: appEditors/AppGerberEditor.py:6645 appGUI/MainGUI.py:833 appGUI/MainGUI.py:1318
#: appGUI/MainGUI.py:2704 appGUI/MainGUI.py:5555
msgid "Add Pad Array"
msgstr ""

#: appEditors/AppGerberEditor.py:6647
msgid "Add an array of pads (linear or circular array)"
msgstr ""

#: appEditors/AppGerberEditor.py:6654
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""

#: appEditors/AppGerberEditor.py:6658 appEditors/exc_plugins/ExcCopyPlugin.py:204
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:183
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:248
#: appEditors/geo_plugins/GeoCopyPlugin.py:202
msgid "Linear"
msgstr ""

#: appEditors/AppGerberEditor.py:6659 appEditors/exc_plugins/ExcCopyPlugin.py:206
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:184
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:249
#: appEditors/geo_plugins/GeoCopyPlugin.py:204
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:43
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:162
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:99
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:43
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:159
#: appPlugins/ToolExtract.py:1057 appPlugins/ToolExtract.py:1192
#: appPlugins/ToolFiducials.py:1116 appPlugins/ToolPunchGerber.py:2069
#: appPlugins/ToolPunchGerber.py:2225
msgid "Circular"
msgstr ""

#: appEditors/AppGerberEditor.py:6665
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:96
msgid "Nr of pads"
msgstr ""

#: appEditors/AppGerberEditor.py:6667
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:98
msgid "Specify how many pads to be in the array."
msgstr ""

#: appEditors/AppGerberEditor.py:6687 appEditors/exc_plugins/ExcCopyPlugin.py:231
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:219
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:283
#: appEditors/geo_plugins/GeoCopyPlugin.py:229
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:93
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:263
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:134
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""

#: appEditors/AppGerberEditor.py:6693 appEditors/exc_plugins/ExcCopyPlugin.py:238
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:147
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:226
#: appEditors/exc_plugins/ExcDrillPlugin.py:154
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:145
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:199
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:290
#: appEditors/exc_plugins/ExcSlotPlugin.py:154 appEditors/exc_plugins/ExcSlotPlugin.py:208
#: appEditors/geo_plugins/GeoCirclePlugin.py:196 appEditors/geo_plugins/GeoCopyPlugin.py:236
#: appEditors/geo_plugins/GeoRectanglePlugin.py:241 appGUI/GUIElements.py:5412
#: appGUI/MainGUI.py:531 appGUI/MainGUI.py:747 appGUI/MainGUI.py:4733 appGUI/MainGUI.py:5313
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:99
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:210
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:269
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:140
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:166 appPlugins/ToolFilm.py:1489
msgid "X"
msgstr ""

#: appEditors/AppGerberEditor.py:6694 appEditors/exc_plugins/ExcCopyPlugin.py:239
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:155
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:227
#: appEditors/exc_plugins/ExcDrillPlugin.py:162
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:153
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:200
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:291
#: appEditors/exc_plugins/ExcSlotPlugin.py:162 appEditors/exc_plugins/ExcSlotPlugin.py:209
#: appEditors/geo_plugins/GeoCirclePlugin.py:204 appEditors/geo_plugins/GeoCopyPlugin.py:237
#: appEditors/geo_plugins/GeoRectanglePlugin.py:249 appGUI/GUIElements.py:5419
#: appGUI/MainGUI.py:534 appGUI/MainGUI.py:4734 appGUI/MainGUI.py:5314
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:100
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:211
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:270
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:141
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:167 appPlugins/ToolFilm.py:1490
msgid "Y"
msgstr ""

#: appEditors/AppGerberEditor.py:6695 appEditors/AppGerberEditor.py:6715
#: appEditors/AppGerberEditor.py:6752 appEditors/AppGerberEditor.py:6849
#: appEditors/exc_plugins/ExcCopyPlugin.py:240 appEditors/exc_plugins/ExcCopyPlugin.py:260
#: appEditors/exc_plugins/ExcCopyPlugin.py:424
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:228
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:248
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:289
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:201
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:207
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:292
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:312
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:352
#: appEditors/exc_plugins/ExcSlotPlugin.py:210 appEditors/exc_plugins/ExcSlotPlugin.py:216
#: appEditors/geo_plugins/GeoCirclePlugin.py:241 appEditors/geo_plugins/GeoCopyPlugin.py:238
#: appEditors/geo_plugins/GeoCopyPlugin.py:258 appEditors/geo_plugins/GeoCopyPlugin.py:422
#: appEditors/geo_plugins/GeoTransformationPlugin.py:663
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:101
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:120
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:212
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:217
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:271
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:292
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:142
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:160
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:123
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:102 appPlugins/ToolDistance.py:942
#: appPlugins/ToolDistance.py:955 appPlugins/ToolFilm.py:1427
#: appPlugins/ToolObjectDistance.py:555 appPlugins/ToolTransform.py:676
msgid "Angle"
msgstr ""

#: appEditors/AppGerberEditor.py:6701 appEditors/exc_plugins/ExcCopyPlugin.py:247
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:235
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:298
#: appEditors/geo_plugins/GeoCopyPlugin.py:245
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:107
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:277
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:148
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:295 appPlugins/ToolCutOut.py:2733
msgid "Pitch"
msgstr ""

#: appEditors/AppGerberEditor.py:6703 appEditors/exc_plugins/ExcCopyPlugin.py:249
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:237
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:300
#: appEditors/geo_plugins/GeoCopyPlugin.py:247
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:109
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:279
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:150
msgid "Pitch = Distance between elements of the array."
msgstr ""

#: appEditors/AppGerberEditor.py:6717 appEditors/exc_plugins/ExcCopyPlugin.py:262
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:250
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:314
#: appEditors/geo_plugins/GeoCopyPlugin.py:260
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360.00 degrees.\n"
"Max value is: 360.00 degrees."
msgstr ""

#: appEditors/AppGerberEditor.py:6741 appEditors/exc_plugins/ExcCopyPlugin.py:413
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:278
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:341
#: appEditors/geo_plugins/GeoCopyPlugin.py:411
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:148
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:320
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:188
msgid ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."
msgstr ""

#: appEditors/AppGerberEditor.py:6745 appEditors/exc_plugins/ExcCopyPlugin.py:417
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:282
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:345
#: appEditors/geo_plugins/GeoCopyPlugin.py:415
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:152
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:324
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:192
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:371
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:404
msgid "CW"
msgstr ""

#: appEditors/AppGerberEditor.py:6746 appEditors/exc_plugins/ExcCopyPlugin.py:418
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:283
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:346
#: appEditors/geo_plugins/GeoCopyPlugin.py:416
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:153
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:325
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:193
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:372
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:405
msgid "CCW"
msgstr ""

#: appEditors/AppGerberEditor.py:6754 appEditors/exc_plugins/ExcCopyPlugin.py:425
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:290
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:353
#: appEditors/geo_plugins/GeoCopyPlugin.py:423
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:122
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:161
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:294
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:333
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:162
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:201
msgid "Angle at which each element in circular array is placed."
msgstr ""

#: appEditors/AppGerberEditor.py:6782 appEditors/AppGerberEditor.py:7225
#: appEditors/geo_plugins/GeoTransformationPlugin.py:90
#: appEditors/geo_plugins/GeoTransformationPlugin.py:598 appGUI/MainGUI.py:775
#: appPlugins/ToolTransform.py:81 appPlugins/ToolTransform.py:563
msgid "Transformation"
msgstr ""

#: appEditors/AppGerberEditor.py:6783 appEditors/AppGerberEditor.py:6865
#: appEditors/geo_plugins/GeoTransformationPlugin.py:599
#: appEditors/geo_plugins/GeoTransformationPlugin.py:679
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:88 appPlugins/ToolTransform.py:564
#: appPlugins/ToolTransform.py:667 appPlugins/ToolTransform.py:692
msgid "Rotate"
msgstr ""

#: appEditors/AppGerberEditor.py:6784 appEditors/geo_plugins/GeoTransformationPlugin.py:600
#: appPlugins/ToolTransform.py:565
msgid "Skew/Shear"
msgstr ""

#: appEditors/AppGerberEditor.py:6786 appEditors/geo_plugins/GeoTransformationPlugin.py:602
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:160 appPlugins/ToolDblSided.py:995
#: appPlugins/ToolFilm.py:1483 appPlugins/ToolTransform.py:567
msgid "Mirror"
msgstr ""

#: appEditors/AppGerberEditor.py:6809 appEditors/geo_plugins/GeoTransformationPlugin.py:623
#: appGUI/GUIElements.py:4462 appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:89
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:147
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:94
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:42 appPlugins/ToolDblSided.py:874
#: appPlugins/ToolDblSided.py:1059 appPlugins/ToolFilm.py:1382 appPlugins/ToolFilm.py:1453
#: appPlugins/ToolMarkers.py:1348 appPlugins/ToolPanelize.py:1201
#: appPlugins/ToolTransform.py:598
msgid "Reference"
msgstr ""

#: appEditors/AppGerberEditor.py:6811 appEditors/geo_plugins/GeoTransformationPlugin.py:625
msgid ""
"The reference point for Rotate, Skew, Scale, Mirror.\n"
"Can be:\n"
"- Origin -> it is the 0, 0 point\n"
"- Selection -> the center of the bounding box of the selected objects\n"
"- Point -> a custom point defined by X,Y coordinates\n"
"- Min Selection -> the point (minx, miny) of the bounding box of the selection"
msgstr ""

#: appEditors/AppGerberEditor.py:6819 appEditors/geo_plugins/GeoTransformationPlugin.py:633
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52 appPlugins/ToolTransform.py:608
msgid "Origin"
msgstr ""

#: appEditors/AppGerberEditor.py:6819 appEditors/AppGerberEditor.py:7234
#: appEditors/geo_plugins/GeoTransformationPlugin.py:103
#: appEditors/geo_plugins/GeoTransformationPlugin.py:633
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:266
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:120
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:313
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:310
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:257
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52 appPlugins/ToolFiducials.py:1142
#: appPlugins/ToolFollow.py:720 appPlugins/ToolIsolation.py:3877
#: appPlugins/ToolMarkers.py:1439 appPlugins/ToolNCC.py:4529 appPlugins/ToolPaint.py:3276
#: appPlugins/ToolPunchGerber.py:2313 appPlugins/ToolTransform.py:608 defaults.py:631
msgid "Selection"
msgstr ""

#: appEditors/AppGerberEditor.py:6819 appEditors/geo_plugins/GeoTransformationPlugin.py:633
#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:107
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:58 appPlugins/ToolDblSided.py:885
#: appPlugins/ToolTransform.py:608
msgid "Point"
msgstr ""

#: appEditors/AppGerberEditor.py:6819 appEditors/geo_plugins/GeoTransformationPlugin.py:633
msgid "Minimum"
msgstr ""

#: appEditors/AppGerberEditor.py:6825 appEditors/AppGerberEditor.py:7121
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:125
#: appEditors/exc_plugins/ExcDrillPlugin.py:132
#: appEditors/exc_plugins/ExcResizePlugin.py:124
#: appEditors/exc_plugins/ExcResizePlugin.py:143
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:123
#: appEditors/exc_plugins/ExcSlotPlugin.py:132 appEditors/geo_plugins/GeoCirclePlugin.py:276
#: appEditors/geo_plugins/GeoTransformationPlugin.py:639
#: appEditors/geo_plugins/GeoTransformationPlugin.py:935
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:136
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:73
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:133
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:48
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:70
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:92
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:114
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:148
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:170
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:192
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:227
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:261
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:283
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:296 appMain.py:9189
#: appPlugins/ToolExtract.py:1276 appPlugins/ToolExtract.py:1305
#: appPlugins/ToolPunchGerber.py:2192 appPlugins/ToolPunchGerber.py:2300
#: appPlugins/ToolRulesCheck.py:1473 appPlugins/ToolRulesCheck.py:1497
#: appPlugins/ToolRulesCheck.py:1522 appPlugins/ToolRulesCheck.py:1547
#: appPlugins/ToolRulesCheck.py:1584 appPlugins/ToolRulesCheck.py:1609
#: appPlugins/ToolRulesCheck.py:1634 appPlugins/ToolRulesCheck.py:1672
#: appPlugins/ToolRulesCheck.py:1709 appPlugins/ToolRulesCheck.py:1734
#: appPlugins/ToolTransform.py:614 appPlugins/ToolTransform.py:979
msgid "Value"
msgstr ""

#: appEditors/AppGerberEditor.py:6827 appEditors/geo_plugins/GeoTransformationPlugin.py:641
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:60 appPlugins/ToolTransform.py:616
msgid "A point of reference in format X,Y."
msgstr ""

#: appEditors/AppGerberEditor.py:6836 appEditors/geo_plugins/GeoTransformationPlugin.py:650
#: appPlugins/ToolTransform.py:625
msgid "Add point coordinates from clipboard."
msgstr ""

#: appEditors/AppGerberEditor.py:6851 appEditors/geo_plugins/GeoTransformationPlugin.py:665
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:104 appPlugins/ToolTransform.py:678
msgid ""
"Angle, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""

#: appEditors/AppGerberEditor.py:6867 appEditors/geo_plugins/GeoTransformationPlugin.py:681
#: appPlugins/ToolTransform.py:694
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""

#: appEditors/AppGerberEditor.py:6887 appEditors/AppGerberEditor.py:6949
#: appEditors/geo_plugins/GeoTransformationPlugin.py:701
#: appEditors/geo_plugins/GeoTransformationPlugin.py:763
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:125
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:177 appPlugins/ToolTransform.py:717
#: appPlugins/ToolTransform.py:787
msgid "Link"
msgstr ""

#: appEditors/AppGerberEditor.py:6889 appEditors/AppGerberEditor.py:6951
#: appEditors/geo_plugins/GeoTransformationPlugin.py:703
#: appEditors/geo_plugins/GeoTransformationPlugin.py:765
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:127
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:179 appPlugins/ToolTransform.py:719
#: appPlugins/ToolTransform.py:789
msgid "Link the Y entry to X entry and copy its content."
msgstr ""

#: appEditors/AppGerberEditor.py:6894 appEditors/geo_plugins/GeoTransformationPlugin.py:708
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:143 appPlugins/ToolTransform.py:730
msgid "X angle"
msgstr ""

#: appEditors/AppGerberEditor.py:6896 appEditors/AppGerberEditor.py:6917
#: appEditors/geo_plugins/GeoTransformationPlugin.py:710
#: appEditors/geo_plugins/GeoTransformationPlugin.py:731 appPlugins/ToolTransform.py:732
#: appPlugins/ToolTransform.py:753
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."
msgstr ""

#: appEditors/AppGerberEditor.py:6904 appEditors/geo_plugins/GeoTransformationPlugin.py:718
#: appPlugins/ToolTransform.py:740
msgid "Skew X"
msgstr ""

#: appEditors/AppGerberEditor.py:6906 appEditors/AppGerberEditor.py:6927
#: appEditors/geo_plugins/GeoTransformationPlugin.py:720
#: appEditors/geo_plugins/GeoTransformationPlugin.py:741 appPlugins/ToolTransform.py:742
#: appPlugins/ToolTransform.py:763
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""

#: appEditors/AppGerberEditor.py:6915 appEditors/geo_plugins/GeoTransformationPlugin.py:729
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:157 appPlugins/ToolTransform.py:751
msgid "Y angle"
msgstr ""

#: appEditors/AppGerberEditor.py:6925 appEditors/geo_plugins/GeoTransformationPlugin.py:739
#: appPlugins/ToolTransform.py:761
msgid "Skew Y"
msgstr ""

#: appEditors/AppGerberEditor.py:6956 appEditors/geo_plugins/GeoTransformationPlugin.py:770
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:194 appPlugins/ToolTransform.py:799
msgid "X factor"
msgstr ""

#: appEditors/AppGerberEditor.py:6958 appEditors/geo_plugins/GeoTransformationPlugin.py:772
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:196 appPlugins/ToolTransform.py:801
msgid "Factor for scaling on X axis."
msgstr ""

#: appEditors/AppGerberEditor.py:6965 appEditors/geo_plugins/GeoTransformationPlugin.py:779
#: appPlugins/ToolTransform.py:808
msgid "Scale X"
msgstr ""

#: appEditors/AppGerberEditor.py:6967 appEditors/AppGerberEditor.py:6987
#: appEditors/geo_plugins/GeoTransformationPlugin.py:781
#: appEditors/geo_plugins/GeoTransformationPlugin.py:801 appPlugins/ToolTransform.py:810
#: appPlugins/ToolTransform.py:830
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""

#: appEditors/AppGerberEditor.py:6976 appEditors/geo_plugins/GeoTransformationPlugin.py:790
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:207 appPlugins/ToolTransform.py:819
msgid "Y factor"
msgstr ""

#: appEditors/AppGerberEditor.py:6978 appEditors/geo_plugins/GeoTransformationPlugin.py:792
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:209 appPlugins/ToolTransform.py:821
msgid "Factor for scaling on Y axis."
msgstr ""

#: appEditors/AppGerberEditor.py:6985 appEditors/geo_plugins/GeoTransformationPlugin.py:799
#: appPlugins/ToolTransform.py:828
msgid "Scale Y"
msgstr ""

#: appEditors/AppGerberEditor.py:7012 appEditors/geo_plugins/GeoTransformationPlugin.py:826
#: appPlugins/ToolTransform.py:858
msgid "Flip on X"
msgstr ""

#: appEditors/AppGerberEditor.py:7014 appEditors/AppGerberEditor.py:7019
#: appEditors/geo_plugins/GeoTransformationPlugin.py:828
#: appEditors/geo_plugins/GeoTransformationPlugin.py:833 appPlugins/ToolTransform.py:860
#: appPlugins/ToolTransform.py:865
msgid "Flip the selected object(s) over the X axis."
msgstr ""

#: appEditors/AppGerberEditor.py:7017 appEditors/geo_plugins/GeoTransformationPlugin.py:831
#: appPlugins/ToolTransform.py:863
msgid "Flip on Y"
msgstr ""

#: appEditors/AppGerberEditor.py:7037 appEditors/geo_plugins/GeoTransformationPlugin.py:851
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:69
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:128
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:231 appPlugins/ToolFilm.py:1362
#: appPlugins/ToolFilm.py:1433 appPlugins/ToolTransform.py:886
msgid "X val"
msgstr ""

#: appEditors/AppGerberEditor.py:7039 appEditors/geo_plugins/GeoTransformationPlugin.py:853
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:233 appPlugins/ToolTransform.py:888
msgid "Distance to offset on X axis. In current units."
msgstr ""

#: appEditors/AppGerberEditor.py:7046 appEditors/geo_plugins/GeoTransformationPlugin.py:860
#: appPlugins/ToolTransform.py:895
msgid "Offset X"
msgstr ""

#: appEditors/AppGerberEditor.py:7048 appEditors/AppGerberEditor.py:7068
#: appEditors/geo_plugins/GeoTransformationPlugin.py:862
#: appEditors/geo_plugins/GeoTransformationPlugin.py:882 appPlugins/ToolTransform.py:897
#: appPlugins/ToolTransform.py:917
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""

#: appEditors/AppGerberEditor.py:7057 appEditors/geo_plugins/GeoTransformationPlugin.py:871
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:79
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:137
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:244 appPlugins/ToolFilm.py:1372
#: appPlugins/ToolFilm.py:1443 appPlugins/ToolTransform.py:906
msgid "Y val"
msgstr ""

#: appEditors/AppGerberEditor.py:7059 appEditors/geo_plugins/GeoTransformationPlugin.py:873
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:246 appPlugins/ToolTransform.py:908
msgid "Distance to offset on Y axis. In current units."
msgstr ""

#: appEditors/AppGerberEditor.py:7066 appEditors/geo_plugins/GeoTransformationPlugin.py:880
#: appPlugins/ToolTransform.py:915
msgid "Offset Y"
msgstr ""

#: appEditors/AppGerberEditor.py:7086 appEditors/geo_plugins/GeoTransformationPlugin.py:900
#: appGUI/ObjectUI.py:495 appGUI/ObjectUI.py:537
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:76
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:139
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:209
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:263 appPlugins/ToolFilm.py:1532
#: appPlugins/ToolInvertGerber.py:271 appPlugins/ToolQRCode.py:893
#: appPlugins/ToolTransform.py:938
msgid "Rounded"
msgstr ""

#: appEditors/AppGerberEditor.py:7088 appEditors/geo_plugins/GeoTransformationPlugin.py:902
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:265 appPlugins/ToolTransform.py:940
msgid ""
"If checked then the buffer will surround the buffered shape,\n"
"every corner will be rounded.\n"
"If not checked then the buffer will follow the exact geometry\n"
"of the buffered shape."
msgstr ""

#: appEditors/AppGerberEditor.py:7096 appEditors/geo_plugins/GeoTransformationPlugin.py:910
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:279 appPlugins/ToolDistance.py:181
#: appPlugins/ToolDistance.py:817 appPlugins/ToolTransform.py:954
msgid "Distance"
msgstr ""

#: appEditors/AppGerberEditor.py:7098 appEditors/geo_plugins/GeoTransformationPlugin.py:912
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:281 appPlugins/ToolTransform.py:956
msgid ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased with the 'distance'."
msgstr ""

#: appEditors/AppGerberEditor.py:7110 appEditors/geo_plugins/GeoTransformationPlugin.py:924
#: appPlugins/ToolTransform.py:968
msgid "Buffer D"
msgstr ""

#: appEditors/AppGerberEditor.py:7112 appEditors/geo_plugins/GeoTransformationPlugin.py:926
#: appPlugins/ToolTransform.py:970
msgid ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the distance."
msgstr ""

#: appEditors/AppGerberEditor.py:7123 appEditors/geo_plugins/GeoTransformationPlugin.py:937
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:298 appPlugins/ToolTransform.py:981
msgid ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased to fit the 'Value'. Value is a percentage\n"
"of the initial dimension."
msgstr ""

#: appEditors/AppGerberEditor.py:7136 appEditors/geo_plugins/GeoTransformationPlugin.py:950
#: appPlugins/ToolTransform.py:994
msgid "Buffer F"
msgstr ""

#: appEditors/AppGerberEditor.py:7138 appEditors/geo_plugins/GeoTransformationPlugin.py:952
#: appPlugins/ToolTransform.py:996
msgid ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the factor."
msgstr ""

#: appEditors/AppGerberEditor.py:7198 appEditors/AppGerberEditor.py:7207
#: appEditors/exc_plugins/ExcCopyPlugin.py:54 appEditors/exc_plugins/ExcCopyPlugin.py:63
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:49
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:58
#: appEditors/exc_plugins/ExcDrillPlugin.py:54 appEditors/exc_plugins/ExcDrillPlugin.py:63
#: appEditors/exc_plugins/ExcResizePlugin.py:54 appEditors/exc_plugins/ExcResizePlugin.py:63
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:51
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:60
#: appEditors/exc_plugins/ExcSlotPlugin.py:54 appEditors/exc_plugins/ExcSlotPlugin.py:63
#: appEditors/geo_plugins/GeoBufferPlugin.py:48 appEditors/geo_plugins/GeoBufferPlugin.py:57
#: appEditors/geo_plugins/GeoCirclePlugin.py:57 appEditors/geo_plugins/GeoCopyPlugin.py:54
#: appEditors/geo_plugins/GeoCopyPlugin.py:63 appEditors/geo_plugins/GeoPaintPlugin.py:44
#: appEditors/geo_plugins/GeoPaintPlugin.py:53 appEditors/geo_plugins/GeoPathPlugin.py:54
#: appEditors/geo_plugins/GeoPathPlugin.py:63
#: appEditors/geo_plugins/GeoRectanglePlugin.py:57
#: appEditors/geo_plugins/GeoSimplificationPlugin.py:51
#: appEditors/geo_plugins/GeoSimplificationPlugin.py:60
#: appEditors/geo_plugins/GeoTextPlugin.py:51 appEditors/geo_plugins/GeoTextPlugin.py:60
#: appEditors/geo_plugins/GeoTransformationPlugin.py:63
#: appEditors/geo_plugins/GeoTransformationPlugin.py:72 appPlugins/ToolAlignObjects.py:85
#: appPlugins/ToolAlignObjects.py:94 appPlugins/ToolCalculators.py:48
#: appPlugins/ToolCalculators.py:57 appPlugins/ToolCopperThieving.py:91
#: appPlugins/ToolCopperThieving.py:100 appPlugins/ToolCutOut.py:134
#: appPlugins/ToolCutOut.py:143 appPlugins/ToolDblSided.py:59 appPlugins/ToolDblSided.py:68
#: appPlugins/ToolDistance.py:102 appPlugins/ToolDistance.py:111
#: appPlugins/ToolDistance.py:168 appPlugins/ToolDistance.py:177
#: appPlugins/ToolDrilling.py:133 appPlugins/ToolDrilling.py:142
#: appPlugins/ToolEtchCompensation.py:54 appPlugins/ToolEtchCompensation.py:63
#: appPlugins/ToolExtract.py:90 appPlugins/ToolExtract.py:99 appPlugins/ToolFiducials.py:92
#: appPlugins/ToolFiducials.py:101 appPlugins/ToolFilm.py:105 appPlugins/ToolFilm.py:114
#: appPlugins/ToolFollow.py:78 appPlugins/ToolFollow.py:87 appPlugins/ToolImage.py:55
#: appPlugins/ToolImage.py:64 appPlugins/ToolInvertGerber.py:54
#: appPlugins/ToolInvertGerber.py:63 appPlugins/ToolIsolation.py:146
#: appPlugins/ToolIsolation.py:155 appPlugins/ToolLevelling.py:131
#: appPlugins/ToolLevelling.py:140 appPlugins/ToolMarkers.py:106
#: appPlugins/ToolMarkers.py:115 appPlugins/ToolMilling.py:171 appPlugins/ToolMilling.py:180
#: appPlugins/ToolNCC.py:147 appPlugins/ToolNCC.py:156 appPlugins/ToolObjectDistance.py:63
#: appPlugins/ToolObjectDistance.py:72 appPlugins/ToolOptimal.py:66
#: appPlugins/ToolOptimal.py:75 appPlugins/ToolPaint.py:154 appPlugins/ToolPaint.py:163
#: appPlugins/ToolPanelize.py:60 appPlugins/ToolPanelize.py:69
#: appPlugins/ToolPcbWizard.py:66 appPlugins/ToolPcbWizard.py:75
#: appPlugins/ToolPunchGerber.py:115 appPlugins/ToolPunchGerber.py:124
#: appPlugins/ToolQRCode.py:75 appPlugins/ToolQRCode.py:84 appPlugins/ToolReport.py:78
#: appPlugins/ToolReport.py:87 appPlugins/ToolRulesCheck.py:69
#: appPlugins/ToolRulesCheck.py:78 appPlugins/ToolSolderPaste.py:73
#: appPlugins/ToolSolderPaste.py:82 appPlugins/ToolSub.py:115 appPlugins/ToolSub.py:124
#: appPlugins/ToolTransform.py:45 appPlugins/ToolTransform.py:54
msgid "Plugin"
msgstr ""

#: appEditors/AppGerberEditor.py:7233 appEditors/geo_plugins/GeoTransformationPlugin.py:102
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:52
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:68 appPlugins/ToolDrilling.py:2915
#: appPlugins/ToolMilling.py:4975 appPlugins/ToolPanelize.py:1221
#: appPlugins/ToolTransform.py:608
msgid "Object"
msgstr ""

#: appEditors/AppGerberEditor.py:7309 appEditors/geo_plugins/GeoTransformationPlugin.py:163
#: appPlugins/ToolTransform.py:175
msgid "Incorrect format for Point value. Needs format X,Y"
msgstr ""

#: appEditors/AppGerberEditor.py:7334 appEditors/geo_plugins/GeoTransformationPlugin.py:188
#: appPlugins/ToolTransform.py:192
msgid "Rotate transformation can not be done for a value of 0."
msgstr ""

#: appEditors/AppGerberEditor.py:7392 appEditors/AppGerberEditor.py:7413
#: appEditors/geo_plugins/GeoTransformationPlugin.py:243
#: appEditors/geo_plugins/GeoTransformationPlugin.py:261 appPlugins/ToolTransform.py:250
#: appPlugins/ToolTransform.py:271
msgid "Scale transformation can not be done for a factor of 0 or 1."
msgstr ""

#: appEditors/AppGerberEditor.py:7426 appEditors/AppGerberEditor.py:7435
#: appEditors/geo_plugins/GeoTransformationPlugin.py:274
#: appEditors/geo_plugins/GeoTransformationPlugin.py:283 appPlugins/ToolTransform.py:284
#: appPlugins/ToolTransform.py:293
msgid "Offset transformation can not be done for a value of 0."
msgstr ""

#: appEditors/AppGerberEditor.py:7472
msgid "Appying Rotate"
msgstr ""

#: appEditors/AppGerberEditor.py:7486 appEditors/AppGerberEditor.py:7528
#: appEditors/AppGerberEditor.py:7568 appEditors/AppGerberEditor.py:7607
#: appEditors/AppGerberEditor.py:7651 appEditors/AppGerberEditor.py:7687
#: appEditors/geo_plugins/GeoTransformationPlugin.py:328
#: appEditors/geo_plugins/GeoTransformationPlugin.py:361
#: appEditors/geo_plugins/GeoTransformationPlugin.py:395
#: appEditors/geo_plugins/GeoTransformationPlugin.py:429
#: appEditors/geo_plugins/GeoTransformationPlugin.py:462
#: appEditors/geo_plugins/GeoTransformationPlugin.py:483 appMain.py:7010 appMain.py:7056
#: appPlugins/ToolTransform.py:343 appPlugins/ToolTransform.py:383
#: appPlugins/ToolTransform.py:422 appPlugins/ToolTransform.py:457
#: appPlugins/ToolTransform.py:494 appPlugins/ToolTransform.py:529
msgid "Action was not executed"
msgstr ""

#: appEditors/AppGerberEditor.py:7505
msgid "Applying Flip"
msgstr ""

#: appEditors/AppGerberEditor.py:7517 appEditors/geo_plugins/GeoTransformationPlugin.py:354
#: appMain.py:7008 appPlugins/ToolTransform.py:370
msgid "Flip on Y axis done"
msgstr ""

#: appEditors/AppGerberEditor.py:7525 appEditors/geo_plugins/GeoTransformationPlugin.py:357
#: appMain.py:7054 appPlugins/ToolTransform.py:379
msgid "Flip on X axis done"
msgstr ""

#: appEditors/AppGerberEditor.py:7548
msgid "Applying Skew"
msgstr ""

#: appEditors/AppGerberEditor.py:7564 appEditors/geo_plugins/GeoTransformationPlugin.py:390
msgid "Skew on the X axis done"
msgstr ""

#: appEditors/AppGerberEditor.py:7566 appEditors/geo_plugins/GeoTransformationPlugin.py:392
msgid "Skew on the Y axis done"
msgstr ""

#: appEditors/AppGerberEditor.py:7589
msgid "Applying Scale"
msgstr ""

#: appEditors/AppGerberEditor.py:7602 appEditors/geo_plugins/GeoTransformationPlugin.py:425
msgid "Scale on the X axis done"
msgstr ""

#: appEditors/AppGerberEditor.py:7604 appEditors/geo_plugins/GeoTransformationPlugin.py:427
msgid "Scale on the Y axis done"
msgstr ""

#: appEditors/AppGerberEditor.py:7625
msgid "Applying Offset"
msgstr ""

#: appEditors/AppGerberEditor.py:7646 appEditors/AppGerberEditor.py:7719
#: appEditors/geo_plugins/GeoTransformationPlugin.py:457
#: appEditors/geo_plugins/GeoTransformationPlugin.py:515 appPlugins/ToolMarkers.py:1366
msgid "Offset on the X axis."
msgstr ""

#: appEditors/AppGerberEditor.py:7648 appEditors/geo_plugins/GeoTransformationPlugin.py:459
#: appPlugins/ToolMarkers.py:1379
msgid "Offset on the Y axis."
msgstr ""

#: appEditors/AppGerberEditor.py:7661
msgid "Applying Buffer"
msgstr ""

#: appEditors/AppGerberEditor.py:7683 appEditors/geo_plugins/GeoTransformationPlugin.py:479
#: appPlugins/ToolTransform.py:525
msgid "Buffer done"
msgstr ""

#: appEditors/AppGerberEditor.py:7691 appEditors/geo_plugins/GeoTransformationPlugin.py:487
msgid "Rotate ..."
msgstr ""

#: appEditors/AppGerberEditor.py:7692 appEditors/AppGerberEditor.py:7744
#: appEditors/AppGerberEditor.py:7760 appEditors/geo_plugins/GeoTransformationPlugin.py:488
#: appEditors/geo_plugins/GeoTransformationPlugin.py:540
#: appEditors/geo_plugins/GeoTransformationPlugin.py:556
msgid "Enter an Angle Value (degrees)"
msgstr ""

#: appEditors/AppGerberEditor.py:7701 appEditors/geo_plugins/GeoTransformationPlugin.py:497
#: appPlugins/ToolTransform.py:341
msgid "Rotate done"
msgstr ""

#: appEditors/AppGerberEditor.py:7704 appEditors/geo_plugins/GeoTransformationPlugin.py:500
msgid "Rotate cancelled"
msgstr ""

#: appEditors/AppGerberEditor.py:7709 appEditors/geo_plugins/GeoTransformationPlugin.py:505
msgid "Offset on X axis ..."
msgstr ""

#: appEditors/AppGerberEditor.py:7710 appEditors/AppGerberEditor.py:7728
#: appEditors/geo_plugins/GeoTransformationPlugin.py:506
#: appEditors/geo_plugins/GeoTransformationPlugin.py:524
msgid "Enter a distance Value"
msgstr ""

#: appEditors/AppGerberEditor.py:7722 appEditors/geo_plugins/GeoTransformationPlugin.py:518
msgid "Offset X cancelled"
msgstr ""

#: appEditors/AppGerberEditor.py:7727 appEditors/geo_plugins/GeoTransformationPlugin.py:523
msgid "Offset on Y axis ..."
msgstr ""

#: appEditors/AppGerberEditor.py:7737 appEditors/geo_plugins/GeoTransformationPlugin.py:533
msgid "Offset on Y axis done"
msgstr ""

#: appEditors/AppGerberEditor.py:7740
msgid "Offset Y cancelled"
msgstr ""

#: appEditors/AppGerberEditor.py:7743 appEditors/geo_plugins/GeoTransformationPlugin.py:539
msgid "Skew on X axis ..."
msgstr ""

#: appEditors/AppGerberEditor.py:7753 appEditors/geo_plugins/GeoTransformationPlugin.py:549
msgid "Skew on X axis done"
msgstr ""

#: appEditors/AppGerberEditor.py:7756
msgid "Skew X cancelled"
msgstr ""

#: appEditors/AppGerberEditor.py:7759 appEditors/geo_plugins/GeoTransformationPlugin.py:555
msgid "Skew on Y axis ..."
msgstr ""

#: appEditors/AppGerberEditor.py:7769 appEditors/geo_plugins/GeoTransformationPlugin.py:565
msgid "Skew on Y axis done"
msgstr ""

#: appEditors/AppGerberEditor.py:7772
msgid "Skew Y cancelled"
msgstr ""

#: appEditors/AppTextEditor.py:90 appEditors/AppTextEditor.py:361 appGUI/GUIElements.py:4576
msgid "Find"
msgstr ""

#: appEditors/AppTextEditor.py:92
msgid "Will search and highlight in yellow the string in the Find box."
msgstr ""

#: appEditors/AppTextEditor.py:97 appEditors/AppTextEditor.py:98
msgid "Find box. Enter here the strings to be searched in the text."
msgstr ""

#: appEditors/AppTextEditor.py:102
msgid "Replace With"
msgstr ""

#: appEditors/AppTextEditor.py:104
msgid "Will replace the string from the Find box with the one in the Replace box."
msgstr ""

#: appEditors/AppTextEditor.py:109 appEditors/AppTextEditor.py:110
msgid "String to replace the one in the Find box throughout the text."
msgstr ""

#: appEditors/AppTextEditor.py:114 appEditors/appGCodeEditor.py:160
#: appGUI/GUIElements.py:5440 appGUI/ObjectUI.py:1220
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:59
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:323
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279 appPlugins/ToolExtract.py:1049
#: appPlugins/ToolFollow.py:727 appPlugins/ToolIsolation.py:3887
#: appPlugins/ToolPaint.py:3288 appPlugins/ToolPunchGerber.py:2062
msgid "All"
msgstr ""

#: appEditors/AppTextEditor.py:115
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""

#: appEditors/AppTextEditor.py:128
msgid "Save changes internally."
msgstr ""

#: appEditors/AppTextEditor.py:135
msgid "Open a OS standard Preview Print window."
msgstr ""

#: appEditors/AppTextEditor.py:141
msgid "Open a OS standard Print window."
msgstr ""

#: appEditors/AppTextEditor.py:147
msgid "Will open a text file in the editor."
msgstr ""

#: appEditors/AppTextEditor.py:153
msgid "Will save the text in the editor into a file."
msgstr ""

#: appEditors/AppTextEditor.py:157
msgid "Run"
msgstr ""

#: appEditors/AppTextEditor.py:158
msgid "Will run the TCL commands found in the text file, one by one."
msgstr ""

#: appEditors/AppTextEditor.py:241 appEditors/appGCodeEditor.py:707
msgid "Open file"
msgstr ""

#: appEditors/AppTextEditor.py:272 appEditors/AppTextEditor.py:278 appMain.py:8166
#: appMain.py:8172 appObjects/CNCJobObject.py:715 appObjects/CNCJobObject.py:721
#: appPlugins/ToolLevelling.py:1466 appPlugins/ToolLevelling.py:1472
#: appPlugins/ToolLevelling.py:1658 appPlugins/ToolLevelling.py:1664
#: appPlugins/ToolSolderPaste.py:1180
msgid "Export Code ..."
msgstr ""

#: appEditors/AppTextEditor.py:333 appObjects/CNCJobObject.py:758
#: appObjects/CNCJobObject.py:1180 appPlugins/ToolLevelling.py:1490
#: appPlugins/ToolLevelling.py:1682 appPlugins/ToolSolderPaste.py:1208
msgid "No such file or directory"
msgstr ""

#: appEditors/AppTextEditor.py:345 appObjects/CNCJobObject.py:1194
#: appPlugins/ToolSolderPaste.py:1219
msgid "Saved to"
msgstr ""

#: appEditors/AppTextEditor.py:359
msgid "End of document."
msgstr ""

#: appEditors/AppTextEditor.py:360
msgid "Start from beginning?"
msgstr ""

#: appEditors/AppTextEditor.py:367 appGUI/GUIElements.py:2771 appGUI/GUIElements.py:2841
#: appGUI/GUIElements.py:2902 appGUI/GUIElements.py:2967 appGUI/GUIElements.py:4501
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:417 appMain.py:5013 appMain.py:5185
#: appMain.py:5276 appMain.py:9795 appMain.py:10149 appMain.py:12020
msgid "Ok"
msgstr ""

#: appEditors/appGCodeEditor.py:76 appGUI/GUIElements.py:4584 appGUI/MainGUI.py:211
#: appGUI/MainGUI.py:393 appGUI/MainGUI.py:4803 appGUI/MainGUI.py:5322
#: appGUI/MainGUI.py:5431 appGUI/MainGUI.py:5574
msgid "Ctrl+S"
msgstr ""

#: appEditors/appGCodeEditor.py:82 appMain.py:8330
msgid "Code Editor"
msgstr ""

#: appEditors/appGCodeEditor.py:166
msgid "Header"
msgstr ""

#: appEditors/appGCodeEditor.py:172
msgid "Start"
msgstr ""

#: appEditors/appGCodeEditor.py:266
msgid "All GCode"
msgstr ""

#: appEditors/appGCodeEditor.py:272
msgid "Header GCode"
msgstr ""

#: appEditors/appGCodeEditor.py:278
msgid "Start GCode"
msgstr ""

#: appEditors/appGCodeEditor.py:682 appObjects/CNCJobObject.py:831
msgid "Loaded Machine Code into Code Editor"
msgstr ""

#: appEditors/appGCodeEditor.py:774 appGUI/ObjectUI.py:1240
#: appPlugins/ToolSolderPaste.py:1112
msgid "GCode Editor"
msgstr ""

#: appEditors/appGCodeEditor.py:812 appEditors/appGCodeEditor.py:823
msgid "GCode"
msgstr ""

#: appEditors/appGCodeEditor.py:823 appGUI/ObjectUI.py:705 appGUI/ObjectUI.py:1398
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:587 appObjects/AppObjectTemplate.py:556
#: appPlugins/ToolDrilling.py:2443 appPlugins/ToolMilling.py:4032
#: appPlugins/ToolMilling.py:4292 appPlugins/ToolReport.py:181
msgid "Drills"
msgstr ""

#: appEditors/appGCodeEditor.py:823 appGUI/ObjectUI.py:705 appGUI/ObjectUI.py:1398
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:175
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:588 appObjects/AppObjectTemplate.py:558
#: appPlugins/ToolDrilling.py:2443 appPlugins/ToolMilling.py:4032
#: appPlugins/ToolMilling.py:4293 appPlugins/ToolReport.py:183
msgid "Slots"
msgstr ""

#: appEditors/appGCodeEditor.py:843 appEditors/appGCodeEditor.py:865
msgid "CNC Code Snippet"
msgstr ""

#: appEditors/appGCodeEditor.py:845 appEditors/appGCodeEditor.py:867
msgid "Code snippet defined in Preferences."
msgstr ""

#: appEditors/appGCodeEditor.py:851 appEditors/appGCodeEditor.py:873
msgid ""
"Type here any G-Code commands you would\n"
"like to insert at the cursor location."
msgstr ""

#: appEditors/appGCodeEditor.py:857 appEditors/appGCodeEditor.py:879
msgid "Insert Code"
msgstr ""

#: appEditors/appGCodeEditor.py:860 appEditors/appGCodeEditor.py:882
msgid "Insert the code above at the cursor location."
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:145 appEditors/exc_plugins/ExcDrillPlugin.py:179
#: appEditors/exc_plugins/ExcSlotPlugin.py:243 appEditors/geo_plugins/GeoCopyPlugin.py:143
#: appEditors/geo_plugins/GeoPathPlugin.py:124
msgid "Projection"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:147 appEditors/exc_plugins/ExcDrillPlugin.py:181
#: appEditors/exc_plugins/ExcSlotPlugin.py:245 appEditors/geo_plugins/GeoCopyPlugin.py:145
#: appEditors/geo_plugins/GeoPathPlugin.py:126
msgid "Length of the current segment/move."
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:162 appEditors/geo_plugins/GeoCopyPlugin.py:160
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:135
#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:41 appPlugins/ToolImage.py:575
#: appPlugins/ToolLevelling.py:1890 appPlugins/ToolMarkers.py:1450
msgid "Mode"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:164 appEditors/geo_plugins/GeoCopyPlugin.py:162
msgid "Single copy or special (array of copies)"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:167 appEditors/geo_plugins/GeoCopyPlugin.py:165
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:116 appPlugins/ToolCutOut.py:2274
msgid "Single"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:168 appEditors/geo_plugins/GeoCopyPlugin.py:166
msgid "Array"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:188
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:192
#: appEditors/geo_plugins/GeoCopyPlugin.py:186
msgid "Specify how many items to be in the array."
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:199
#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:178
#: appEditors/geo_plugins/GeoCopyPlugin.py:197
msgid ""
"Select the type of array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:205 appEditors/geo_plugins/GeoCopyPlugin.py:203
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:99
msgid "2D"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:288 appEditors/geo_plugins/GeoCopyPlugin.py:286
msgid "Placement"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:290 appEditors/geo_plugins/GeoCopyPlugin.py:288
msgid ""
"Placement of array items:\n"
"'Spacing' - define space between rows and columns \n"
"'Offset' - each row (and column) will be placed at a multiple of a value, from origin"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:307 appEditors/geo_plugins/GeoCopyPlugin.py:305
#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:81
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:86 appPlugins/ToolLevelling.py:1936
#: appPlugins/ToolPanelize.py:1317
msgid "Rows"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:309 appEditors/geo_plugins/GeoCopyPlugin.py:307
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:88 appPlugins/ToolPanelize.py:1319
msgid "Number of rows"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:318 appEditors/geo_plugins/GeoCopyPlugin.py:316
#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:71
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:74 appPlugins/ToolLevelling.py:1925
#: appPlugins/ToolPanelize.py:1306
msgid "Columns"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:320 appEditors/geo_plugins/GeoCopyPlugin.py:318
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:76 appPlugins/ToolPanelize.py:1308
msgid "Number of columns"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:341 appEditors/geo_plugins/GeoCopyPlugin.py:339
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:61 appPlugins/ToolPanelize.py:1294
msgid "Spacing rows"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:343 appEditors/geo_plugins/GeoCopyPlugin.py:341
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:63 appPlugins/ToolPanelize.py:1296
msgid ""
"Spacing between rows.\n"
"In current units."
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:354 appEditors/geo_plugins/GeoCopyPlugin.py:352
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:47 appPlugins/ToolPanelize.py:1281
msgid "Spacing cols"
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:356 appEditors/geo_plugins/GeoCopyPlugin.py:354
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:49 appPlugins/ToolPanelize.py:1283
msgid ""
"Spacing between columns.\n"
"In current units."
msgstr ""

#: appEditors/exc_plugins/ExcCopyPlugin.py:376 appEditors/exc_plugins/ExcCopyPlugin.py:389
#: appEditors/geo_plugins/GeoCopyPlugin.py:374 appEditors/geo_plugins/GeoCopyPlugin.py:387
msgid ""
"'Offset' - each row (and column) will be placed at a multiple of a value, from origin"
msgstr ""

#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:135
#: appEditors/exc_plugins/ExcDrillPlugin.py:142
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:133
#: appEditors/exc_plugins/ExcSlotPlugin.py:142 appEditors/geo_plugins/GeoCirclePlugin.py:183
#: appEditors/geo_plugins/GeoRectanglePlugin.py:216
msgid "Position"
msgstr ""

#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:301
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:364
#: appEditors/geo_plugins/GeoCirclePlugin.py:212
#: appEditors/geo_plugins/GeoRectanglePlugin.py:284 appPlugins/ToolImage.py:892
msgid "Radius"
msgstr ""

#: appEditors/exc_plugins/ExcDrillArrayPlugin.py:302
#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:365
msgid "Array radius."
msgstr ""

#: appEditors/exc_plugins/ExcResizePlugin.py:145
msgid "Diameter to resize to."
msgstr ""

#: appEditors/exc_plugins/ExcResizePlugin.py:160
msgid "Resize a drill or a selection of drills."
msgstr ""

#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:163
#: appEditors/exc_plugins/ExcSlotPlugin.py:172
msgid ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."
msgstr ""

#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:179
#: appEditors/exc_plugins/ExcSlotPlugin.py:188
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:187
msgid "Length. The length of the slot."
msgstr ""

#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:193
#: appEditors/exc_plugins/ExcSlotPlugin.py:202
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:203
msgid ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"
msgstr ""

#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:209
#: appEditors/exc_plugins/ExcSlotPlugin.py:218
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:219
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360.00 degrees.\n"
"Max value is: 360.00 degrees."
msgstr ""

#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:227
msgid "Array parameters."
msgstr ""

#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:243
msgid ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""

#: appEditors/exc_plugins/ExcSlotArrayPlugin.py:256
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:250
msgid "Specify how many slots to be in the array."
msgstr ""

#: appEditors/geo_plugins/GeoBufferPlugin.py:131
#: appEditors/geo_plugins/GeoBufferPlugin.py:277
msgid ""
"Negative buffer value is not accepted. Use Buffer interior to generate an 'inside' shape"
msgstr ""

#: appEditors/geo_plugins/GeoBufferPlugin.py:145
#: appEditors/geo_plugins/GeoBufferPlugin.py:222
#: appEditors/geo_plugins/GeoBufferPlugin.py:290
msgid "Invalid distance."
msgstr ""

#: appEditors/geo_plugins/GeoBufferPlugin.py:190
#: appEditors/geo_plugins/GeoBufferPlugin.py:256
#: appEditors/geo_plugins/GeoBufferPlugin.py:324
msgid "Failed, the result is empty."
msgstr ""

#: appEditors/geo_plugins/GeoBufferPlugin.py:211
msgid "Negative buffer value is not accepted."
msgstr ""

#: appEditors/geo_plugins/GeoBufferPlugin.py:377
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square': the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled': the corner is a line that directly connects the features meeting in the "
"corner"
msgstr ""

#: appEditors/geo_plugins/GeoBufferPlugin.py:393
msgid "Buffer Interior"
msgstr ""

#: appEditors/geo_plugins/GeoBufferPlugin.py:395
msgid "Buffer Exterior"
msgstr ""

#: appEditors/geo_plugins/GeoBufferPlugin.py:401
msgid "Full Buffer"
msgstr ""

#: appEditors/geo_plugins/GeoCirclePlugin.py:131
#: appEditors/geo_plugins/GeoRectanglePlugin.py:164
#: appEditors/geo_plugins/GeoTextPlugin.py:266 appGUI/MainGUI.py:1717
msgid "Apply"
msgstr ""

#: appEditors/geo_plugins/GeoCirclePlugin.py:266
#: appEditors/geo_plugins/GeoRectanglePlugin.py:324
msgid "Note"
msgstr ""

#: appEditors/geo_plugins/GeoCirclePlugin.py:268
#: appEditors/geo_plugins/GeoRectanglePlugin.py:326
msgid "Shift + click to select a shape for modification."
msgstr ""

#: appEditors/geo_plugins/GeoPaintPlugin.py:59
msgid "Paint Tool"
msgstr ""

#: appEditors/geo_plugins/GeoPaintPlugin.py:126
#, python-format
msgid "Could not do Paint. Overlap value has to be less than 100%%."
msgstr ""

#: appEditors/geo_plugins/GeoPaintPlugin.py:139
msgid "Invalid value for"
msgstr ""

#: appEditors/geo_plugins/GeoPaintPlugin.py:201 appPlugins/ToolMilling.py:3303
#: appPlugins/ToolPaint.py:1984 appPlugins/ToolPaint.py:2195
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a different method of "
"Paint"
msgstr ""

#: appEditors/geo_plugins/GeoPaintPlugin.py:237
msgid "Diameter of the tool to be used in the operation."
msgstr ""

#: appEditors/geo_plugins/GeoPaintPlugin.py:283
msgid ""
"Algorithm to paint the polygons:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""

#: appEditors/geo_plugins/GeoRectanglePlugin.py:228
msgid "Anchor"
msgstr ""

#: appEditors/geo_plugins/GeoRectanglePlugin.py:230 appMain.py:5806
msgid "T Left"
msgstr ""

#: appEditors/geo_plugins/GeoRectanglePlugin.py:231 appMain.py:5807
msgid "T Right"
msgstr ""

#: appEditors/geo_plugins/GeoRectanglePlugin.py:232 appMain.py:5808
msgid "B Left"
msgstr ""

#: appEditors/geo_plugins/GeoRectanglePlugin.py:233 appMain.py:5809
msgid "B Right"
msgstr ""

#: appEditors/geo_plugins/GeoRectanglePlugin.py:234 appGUI/ObjectUI.py:1693
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:154
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:101 appMain.py:5576 appMain.py:5810
#: appPlugins/ToolFilm.py:1389 appPlugins/ToolFilm.py:1460 appPlugins/ToolMarkers.py:1357
msgid "Center"
msgstr ""

#: appEditors/geo_plugins/GeoRectanglePlugin.py:256
msgid "Corner"
msgstr ""

#: appEditors/geo_plugins/GeoRectanglePlugin.py:270
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corners are rounded\n"
" - 'Square': the corners meet in a sharp angle\n"
" - 'Beveled': the corners are a line that directly connects the features meeting in the "
"corner"
msgstr ""

#: appEditors/geo_plugins/GeoRectanglePlugin.py:310 appObjects/AppObjectTemplate.py:947
#: appPlugins/ToolReport.py:599
msgid "Width"
msgstr ""

#: appEditors/geo_plugins/GeoTextPlugin.py:66
msgid "Text Tool"
msgstr ""

#: appEditors/geo_plugins/GeoTextPlugin.py:195 appEditors/geo_plugins/GeoTextPlugin.py:256
#: appGUI/MainGUI.py:1846
msgid "Text"
msgstr ""

#: appEditors/geo_plugins/GeoTextPlugin.py:220 appGUI/ObjectUI.py:1597
msgid "Font"
msgstr ""

#: appEditors/geo_plugins/GeoTransformationPlugin.py:313 appPlugins/ToolTransform.py:321
msgid "Rotating"
msgstr ""

#: appEditors/geo_plugins/GeoTransformationPlugin.py:346 appPlugins/ToolTransform.py:353
msgid "Flipping"
msgstr ""

#: appEditors/geo_plugins/GeoTransformationPlugin.py:381 appPlugins/ToolTransform.py:398
msgid "Skewing"
msgstr ""

#: appEditors/geo_plugins/GeoTransformationPlugin.py:416 appPlugins/ToolTransform.py:432
msgid "Scaling"
msgstr ""

#: appEditors/geo_plugins/GeoTransformationPlugin.py:447 appPlugins/ToolTransform.py:467
msgid "Offsetting"
msgstr ""

#: appEditors/geo_plugins/GeoTransformationPlugin.py:472
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:56 appObjects/GerberObject.py:423
#: appPlugins/ToolCopperThieving.py:608 appPlugins/ToolCopperThieving.py:803
#: appPlugins/ToolCopperThieving.py:816 appPlugins/ToolIsolation.py:1602
#: appPlugins/ToolNCC.py:1989 appPlugins/ToolNCC.py:2016 appPlugins/ToolNCC.py:2124
#: appPlugins/ToolNCC.py:2137 appPlugins/ToolNCC.py:3038 appPlugins/ToolNCC.py:3143
#: appPlugins/ToolNCC.py:3158 appPlugins/ToolNCC.py:3426 appPlugins/ToolNCC.py:3527
#: appPlugins/ToolNCC.py:3542 appPlugins/ToolTransform.py:504 camlib.py:1166
msgid "Buffering"
msgstr ""

#: appEditors/geo_plugins/GeoTransformationPlugin.py:536
msgid "Offset on the Y axis canceled"
msgstr ""

#: appEditors/geo_plugins/GeoTransformationPlugin.py:552
msgid "Skew on X axis canceled"
msgstr ""

#: appEditors/geo_plugins/GeoTransformationPlugin.py:568
msgid "Skew on Y axis canceled"
msgstr ""

#: appGUI/GUIElements.py:427 appGUI/GUIElements.py:1206 appGUI/GUIElements.py:1450
msgid "Read Only"
msgstr ""

#: appGUI/GUIElements.py:432 appGUI/GUIElements.py:1211 appGUI/GUIElements.py:1455
#: appGUI/GUIElements.py:1896 appGUI/GUIElements.py:2190 appGUI/GUIElements.py:4542
msgid "Undo"
msgstr ""

#: appGUI/GUIElements.py:432 appGUI/GUIElements.py:1211 appGUI/GUIElements.py:1455
#: appGUI/GUIElements.py:1896 appGUI/GUIElements.py:2190 appGUI/GUIElements.py:4542
msgid "Ctrl+Z"
msgstr ""

#: appGUI/GUIElements.py:439 appGUI/GUIElements.py:1218 appGUI/GUIElements.py:1462
#: appGUI/GUIElements.py:1903 appGUI/GUIElements.py:2195 appGUI/GUIElements.py:4547
msgid "Redo"
msgstr ""

#: appGUI/GUIElements.py:439 appGUI/GUIElements.py:1218 appGUI/GUIElements.py:1462
#: appGUI/GUIElements.py:1903 appGUI/GUIElements.py:2195 appGUI/GUIElements.py:4547
msgid "Ctrl+Y"
msgstr ""

#: appGUI/GUIElements.py:448 appGUI/GUIElements.py:1227 appGUI/GUIElements.py:1471
#: appGUI/GUIElements.py:1912 appGUI/GUIElements.py:2202 appGUI/GUIElements.py:4554
#: appGUI/MainGUI.py:1866 appGUI/ObjectUI.py:1222
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:61
msgid "Cut"
msgstr ""

#: appGUI/GUIElements.py:448 appGUI/GUIElements.py:1227 appGUI/GUIElements.py:1471
#: appGUI/GUIElements.py:1912 appGUI/GUIElements.py:2202 appGUI/GUIElements.py:4554
#: appGUI/MainGUI.py:5323
msgid "Ctrl+X"
msgstr ""

#: appGUI/GUIElements.py:455 appGUI/GUIElements.py:1234 appGUI/GUIElements.py:1478
#: appGUI/GUIElements.py:1919 appGUI/GUIElements.py:2207 appGUI/GUIElements.py:4559
#: appGUI/MainGUI.py:464 appGUI/MainGUI.py:4795
msgid "Ctrl+C"
msgstr ""

#: appGUI/GUIElements.py:462 appGUI/GUIElements.py:1241 appGUI/GUIElements.py:1485
#: appGUI/GUIElements.py:1926 appGUI/GUIElements.py:2212
msgid "Paste"
msgstr ""

#: appGUI/GUIElements.py:462 appGUI/GUIElements.py:1241 appGUI/GUIElements.py:1485
#: appGUI/GUIElements.py:1926 appGUI/GUIElements.py:2212
msgid "Ctrl+V"
msgstr ""

#: appGUI/GUIElements.py:469 appGUI/GUIElements.py:1248 appGUI/GUIElements.py:1492
#: appGUI/GUIElements.py:1931 appGUI/GUIElements.py:2217 appGUI/GUIElements.py:4564
#: appGUI/MainGUI.py:5121 appGUI/MainGUI.py:5122 appGUI/MainGUI.py:5327
#: appGUI/MainGUI.py:5427 appGUI/MainGUI.py:5428 appGUI/MainGUI.py:5568
#: appGUI/MainGUI.py:5569
msgid "Del"
msgstr ""

#: appGUI/GUIElements.py:478 appGUI/GUIElements.py:1257 appGUI/GUIElements.py:1501
#: appGUI/GUIElements.py:1938 appGUI/GUIElements.py:2224 appGUI/GUIElements.py:4571
#: appGUI/MainGUI.py:501 appGUI/MainGUI.py:636 appGUI/MainGUI.py:4794
#: appObjects/ObjectCollection.py:1200 appObjects/ObjectCollection.py:1247
#: appPlugins/ToolIsolation.py:3927 appPlugins/ToolPunchGerber.py:2340
#: appPlugins/ToolRulesCheck.py:1178
msgid "Select All"
msgstr ""

#: appGUI/GUIElements.py:478 appGUI/GUIElements.py:1257 appGUI/GUIElements.py:1501
#: appGUI/GUIElements.py:1938 appGUI/GUIElements.py:2224 appGUI/GUIElements.py:4571
#: appGUI/MainGUI.py:501 appGUI/MainGUI.py:4794
msgid "Ctrl+A"
msgstr ""

#: appGUI/GUIElements.py:1264 appGUI/GUIElements.py:1508
msgid "Step Up"
msgstr ""

#: appGUI/GUIElements.py:1271 appGUI/GUIElements.py:1515
msgid "Step Down"
msgstr ""

#: appGUI/GUIElements.py:4464
msgid ""
"The reference can be:\n"
"- Absolute -> the reference point is point (0,0)\n"
"- Relative -> the reference point is the mouse position before Jump"
msgstr ""

#: appGUI/GUIElements.py:4469
msgid "Abs"
msgstr ""

#: appGUI/GUIElements.py:4470
msgid "Relative"
msgstr ""

#: appGUI/GUIElements.py:4481
msgid "Location"
msgstr ""

#: appGUI/GUIElements.py:4483
msgid ""
"The Location value is a tuple (x,y).\n"
"If the reference is Absolute then the Jump will be at the position (x,y).\n"
"If the reference is Relative then the Jump will be at the (x,y) distance\n"
"from the current position (in some cases, last mouse click position).\n"
"WARNING: comma is a separator between values."
msgstr ""

#: appGUI/GUIElements.py:4576
msgid "Ctrl+F"
msgstr ""

#: appGUI/GUIElements.py:4584
msgid "Save Log"
msgstr ""

#: appGUI/GUIElements.py:4590
msgid "Clear All"
msgstr ""

#: appGUI/GUIElements.py:4590
msgid "Shift+Del"
msgstr ""

#: appGUI/GUIElements.py:4709 appPlugins/ToolShell.py:326
msgid "Type >help< to get started"
msgstr ""

#: appGUI/GUIElements.py:5337 appGUI/GUIElements.py:5354
msgid "Jog the Y axis."
msgstr ""

#: appGUI/GUIElements.py:5345 appGUI/MainGUI.py:482 appGUI/MainGUI.py:1105
#: appGUI/MainGUI.py:2501
msgid "Move to Origin"
msgstr ""

#: appGUI/GUIElements.py:5362 appGUI/GUIElements.py:5370
msgid "Jog the X axis."
msgstr ""

#: appGUI/GUIElements.py:5380 appGUI/GUIElements.py:5390
msgid "Jog the Z axis."
msgstr ""

#: appGUI/GUIElements.py:5414
msgid "Zero the CNC X axes at current position."
msgstr ""

#: appGUI/GUIElements.py:5422
msgid "Zero the CNC Y axes at current position."
msgstr ""

#: appGUI/GUIElements.py:5427
msgid "Z"
msgstr ""

#: appGUI/GUIElements.py:5430
msgid "Zero the CNC Z axes at current position."
msgstr ""

#: appGUI/GUIElements.py:5434
msgid "Do Home"
msgstr ""

#: appGUI/GUIElements.py:5436
msgid "Perform a homing cycle on all axis."
msgstr ""

#: appGUI/GUIElements.py:5445
msgid "Zero all CNC axes at current position."
msgstr ""

#: appGUI/GUIElements.py:5604 appGUI/GUIElements.py:5613
msgid "Idle."
msgstr ""

#: appGUI/GUIElements.py:5656
msgid "Application started ..."
msgstr ""

#: appGUI/GUIElements.py:5657
msgid "Hello!"
msgstr ""

#: appGUI/GUIElements.py:5767
msgid "Run Script ..."
msgstr ""

#: appGUI/GUIElements.py:5769 appGUI/MainGUI.py:246
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""

#: appGUI/GUIElements.py:5777
msgid "Toggle GUI ..."
msgstr ""

#: appGUI/GUIElements.py:5779
msgid "Will show/hide the GUI."
msgstr ""

#: appGUI/GUIElements.py:5786 appGUI/MainGUI.py:168 appPlugins/ToolPcbWizard.py:409
#: appPlugins/ToolPcbWizard.py:417
msgid "Open"
msgstr ""

#: appGUI/GUIElements.py:5790 appGUI/MainGUI.py:173 appGUI/MainGUI.py:1068
#: appGUI/MainGUI.py:2464 appGUI/MainGUI.py:4801 appMain.py:9694 appMain.py:9697
msgid "Open Project"
msgstr ""

#: appGUI/GUIElements.py:5796 appGUI/MainGUI.py:180 appGUI/MainGUI.py:1063
#: appGUI/MainGUI.py:2459 appMain.py:9577 appMain.py:9582
msgid "Open Gerber"
msgstr ""

#: appGUI/GUIElements.py:5796 appGUI/MainGUI.py:180 appGUI/MainGUI.py:4798
msgid "Ctrl+G"
msgstr ""

#: appGUI/GUIElements.py:5801 appGUI/MainGUI.py:185 appGUI/MainGUI.py:1065
#: appGUI/MainGUI.py:2461 appMain.py:9616 appMain.py:9621
msgid "Open Excellon"
msgstr ""

#: appGUI/GUIElements.py:5801 appGUI/MainGUI.py:185 appGUI/MainGUI.py:862
#: appGUI/MainGUI.py:4797 appGUI/MainGUI.py:5573
msgid "Ctrl+E"
msgstr ""

#: appGUI/GUIElements.py:5806 appGUI/MainGUI.py:190 appMain.py:9658 appMain.py:9663
msgid "Open G-Code"
msgstr ""

#: appGUI/GUIElements.py:5816 appGUI/MainGUI.py:377
msgid "Exit"
msgstr ""

#: appGUI/MainGUI.py:117 appGUI/MainGUI.py:119 appGUI/MainGUI.py:1755
msgid "Toggle Panel"
msgstr ""

#: appGUI/MainGUI.py:129
msgid "File"
msgstr ""

#: appGUI/MainGUI.py:134 appGUI/MainGUI.py:4800
msgid "New Project"
msgstr ""

#: appGUI/MainGUI.py:134 appGUI/MainGUI.py:4800
msgid "Ctrl+N"
msgstr ""

#: appGUI/MainGUI.py:136
msgid "Will create a new, blank project"
msgstr ""

#: appGUI/MainGUI.py:141 appGUI/MainGUI.py:1766 appPlugins/ToolLevelling.py:2066
msgid "New"
msgstr ""

#: appGUI/MainGUI.py:145 appGUI/MainGUI.py:1612 appGUI/MainGUI.py:1768
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:76
#: appObjects/ObjectCollection.py:266 appPlugins/ToolCopperThieving.py:195
#: appPlugins/ToolCopperThieving.py:1373 appPlugins/ToolCopperThieving.py:1384
#: appPlugins/ToolCutOut.py:2283 appPlugins/ToolCutOut.py:2699
#: appPlugins/ToolDblSided.py:734 appPlugins/ToolDblSided.py:943 appPlugins/ToolFilm.py:1277
#: appPlugins/ToolFilm.py:1300 appPlugins/ToolImage.py:221 appPlugins/ToolImage.py:251
#: appPlugins/ToolImage.py:543 appPlugins/ToolIsolation.py:3847
#: appPlugins/ToolIsolation.py:3898 appPlugins/ToolMarkers.py:1563
#: appPlugins/ToolMilling.py:2751 appPlugins/ToolMilling.py:2916
#: appPlugins/ToolMilling.py:3970 appPlugins/ToolNCC.py:4082 appPlugins/ToolNCC.py:4546
#: appPlugins/ToolPaint.py:3302 appPlugins/ToolPanelize.py:134
#: appPlugins/ToolPanelize.py:242 appPlugins/ToolPanelize.py:1176
#: appPlugins/ToolPanelize.py:1227 appPlugins/ToolSolderPaste.py:1644
#: appPlugins/ToolSub.py:882 appPlugins/ToolTransform.py:151 appPlugins/ToolTransform.py:638
msgid "Geometry"
msgstr ""

#: appGUI/MainGUI.py:145 appGUI/MainGUI.py:720 appGUI/MainGUI.py:839 appGUI/MainGUI.py:4725
#: appGUI/MainGUI.py:5306 appGUI/MainGUI.py:5562
msgid "N"
msgstr ""

#: appGUI/MainGUI.py:147
msgid "Will create a new, empty Geometry Object."
msgstr ""

#: appGUI/MainGUI.py:150 appGUI/MainGUI.py:1590
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:94
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:74
#: appObjects/ObjectCollection.py:264 appPlugins/ToolAlignObjects.py:428
#: appPlugins/ToolAlignObjects.py:467 appPlugins/ToolCopperThieving.py:195
#: appPlugins/ToolCopperThieving.py:1373 appPlugins/ToolCopperThieving.py:1384
#: appPlugins/ToolCutOut.py:2282 appPlugins/ToolDblSided.py:734
#: appPlugins/ToolDblSided.py:941 appPlugins/ToolFilm.py:1276 appPlugins/ToolFilm.py:1299
#: appPlugins/ToolImage.py:253 appPlugins/ToolImage.py:543 appPlugins/ToolIsolation.py:3848
#: appPlugins/ToolIsolation.py:3898 appPlugins/ToolMarkers.py:1562
#: appPlugins/ToolNCC.py:4083 appPlugins/ToolNCC.py:4546 appPlugins/ToolPaint.py:3302
#: appPlugins/ToolPanelize.py:128 appPlugins/ToolPanelize.py:242
#: appPlugins/ToolPanelize.py:1176 appPlugins/ToolPanelize.py:1227
#: appPlugins/ToolPanelize.py:1338 appPlugins/ToolRulesCheck.py:1188
#: appPlugins/ToolSub.py:823 appPlugins/ToolTransform.py:151 appPlugins/ToolTransform.py:636
#: defaults.py:632
msgid "Gerber"
msgstr ""

#: appGUI/MainGUI.py:150 appGUI/MainGUI.py:763 appGUI/MainGUI.py:853 appGUI/MainGUI.py:4719
#: appGUI/MainGUI.py:5297 appGUI/MainGUI.py:5556
msgid "B"
msgstr ""

#: appGUI/MainGUI.py:152
msgid "Will create a new, empty Gerber Object."
msgstr ""

#: appGUI/MainGUI.py:155 appGUI/MainGUI.py:1601 appGUI/MainGUI.py:1772
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:98
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:75
#: appObjects/ObjectCollection.py:265 appPlugins/ToolAlignObjects.py:429
#: appPlugins/ToolAlignObjects.py:468 appPlugins/ToolCopperThieving.py:195
#: appPlugins/ToolCopperThieving.py:1373 appPlugins/ToolCopperThieving.py:1384
#: appPlugins/ToolDblSided.py:734 appPlugins/ToolDblSided.py:942
#: appPlugins/ToolDblSided.py:970 appPlugins/ToolFilm.py:1615
#: appPlugins/ToolIsolation.py:3898 appPlugins/ToolMilling.py:3971
#: appPlugins/ToolNCC.py:4546 appPlugins/ToolPaint.py:3302 appPlugins/ToolPanelize.py:131
#: appPlugins/ToolPanelize.py:242 appPlugins/ToolPanelize.py:1176
#: appPlugins/ToolPunchGerber.py:2155 appPlugins/ToolPunchGerber.py:2169
#: appPlugins/ToolRulesCheck.py:1195 appPlugins/ToolRulesCheck.py:1393
#: appPlugins/ToolTransform.py:151 appPlugins/ToolTransform.py:637
msgid "Excellon"
msgstr ""

#: appGUI/MainGUI.py:155 appGUI/MainGUI.py:4723
msgid "L"
msgstr ""

#: appGUI/MainGUI.py:157
msgid "Will create a new, empty Excellon Object."
msgstr ""

#: appGUI/MainGUI.py:162 appObjects/ObjectCollection.py:269
msgid "Document"
msgstr ""

#: appGUI/MainGUI.py:162 appGUI/MainGUI.py:794 appGUI/MainGUI.py:850 appGUI/MainGUI.py:5299
#: appGUI/MainGUI.py:5419 appGUI/MainGUI.py:5558
msgid "D"
msgstr ""

#: appGUI/MainGUI.py:164
msgid "Will create a new, empty Document Object."
msgstr ""

#: appGUI/MainGUI.py:173 appGUI/MainGUI.py:4801
msgid "Ctrl+O"
msgstr ""

#: appGUI/MainGUI.py:197
msgid "Open Config"
msgstr ""

#: appGUI/MainGUI.py:202
msgid "Recent projects"
msgstr ""

#: appGUI/MainGUI.py:204
msgid "Recent files"
msgstr ""

#: appGUI/MainGUI.py:207 appGUI/MainGUI.py:955 appGUI/MainGUI.py:1725
#: appGUI/ObjectUI.py:1443 appObjects/ObjectCollection.py:413
msgid "Save"
msgstr ""

#: appGUI/MainGUI.py:211 appGUI/MainGUI.py:2466 appGUI/MainGUI.py:4803
msgid "Save Project"
msgstr ""

#: appGUI/MainGUI.py:217 appGUI/MainGUI.py:5064
msgid "Save Project As"
msgstr ""

#: appGUI/MainGUI.py:217 appGUI/MainGUI.py:5064
msgid "Ctrl+Shift+S"
msgstr ""

#: appGUI/MainGUI.py:232
msgid "Scripting"
msgstr ""

#: appGUI/MainGUI.py:236 appGUI/MainGUI.py:1136 appGUI/MainGUI.py:2530
msgid "New Script"
msgstr ""

#: appGUI/MainGUI.py:238 appGUI/MainGUI.py:1138 appGUI/MainGUI.py:2532
msgid "Open Script"
msgstr ""

#: appGUI/MainGUI.py:241
msgid "Open Example"
msgstr ""

#: appGUI/MainGUI.py:244 appGUI/MainGUI.py:1140 appGUI/MainGUI.py:2534
msgid "Run Script"
msgstr ""

#: appGUI/MainGUI.py:244 appGUI/MainGUI.py:4879
msgid "Shift+S"
msgstr ""

#: appGUI/MainGUI.py:261
msgid "Import"
msgstr ""

#: appGUI/MainGUI.py:264
msgid "SVG as Geometry Object"
msgstr ""

#: appGUI/MainGUI.py:268
msgid "SVG as Gerber Object"
msgstr ""

#: appGUI/MainGUI.py:274
msgid "DXF as Geometry Object"
msgstr ""

#: appGUI/MainGUI.py:278
msgid "DXF as Gerber Object"
msgstr ""

#: appGUI/MainGUI.py:283
msgid "HPGL2 as Geometry Object"
msgstr ""

#: appGUI/MainGUI.py:289 appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:19
#: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:19
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:20 appPlugins/ToolFilm.py:1650
msgid "Export"
msgstr ""

#: appGUI/MainGUI.py:294 appMain.py:9805 appMain.py:9810 appPlugins/ToolQRCode.py:642
#: appPlugins/ToolQRCode.py:647
msgid "Export SVG"
msgstr ""

#: appGUI/MainGUI.py:299 appMain.py:10159 appMain.py:10164
msgid "Export DXF"
msgstr ""

#: appGUI/MainGUI.py:306 appPlugins/ToolQRCode.py:593 appPlugins/ToolQRCode.py:598
msgid "Export PNG"
msgstr ""

#: appGUI/MainGUI.py:308
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""

#: appGUI/MainGUI.py:318 appMain.py:10056 appMain.py:10061
msgid "Export Excellon"
msgstr ""

#: appGUI/MainGUI.py:320
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""

#: appGUI/MainGUI.py:328 appMain.py:10101 appMain.py:10106
msgid "Export Gerber"
msgstr ""

#: appGUI/MainGUI.py:330
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""

#: appGUI/MainGUI.py:340
msgid "Backup"
msgstr ""

#: appGUI/MainGUI.py:345
msgid "Import Preferences from file"
msgstr ""

#: appGUI/MainGUI.py:352
msgid "Export Preferences to file"
msgstr ""

#: appGUI/MainGUI.py:361 appGUI/preferences/PreferencesUIManager.py:1383
msgid "Save Preferences"
msgstr ""

#: appGUI/MainGUI.py:368 appGUI/MainGUI.py:4802
msgid "Print (PDF)"
msgstr ""

#: appGUI/MainGUI.py:368 appGUI/MainGUI.py:4802
msgid "Ctrl+P"
msgstr ""

#: appGUI/MainGUI.py:385 appGUI/MainGUI.py:949 appGUI/MainGUI.py:1927
msgid "Edit"
msgstr ""

#: appGUI/MainGUI.py:390
msgid "Edit Object"
msgstr ""

#: appGUI/MainGUI.py:390 appGUI/MainGUI.py:735 appGUI/MainGUI.py:847 appGUI/MainGUI.py:4720
#: appGUI/MainGUI.py:5300 appGUI/MainGUI.py:5559
msgid "E"
msgstr ""

#: appGUI/MainGUI.py:403
msgid "Conversion"
msgstr ""

#: appGUI/MainGUI.py:407
msgid "Convert Single to MultiGeo"
msgstr ""

#: appGUI/MainGUI.py:409
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""

#: appGUI/MainGUI.py:414
msgid "Convert Multi to SingleGeo"
msgstr ""

#: appGUI/MainGUI.py:416
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""

#: appGUI/MainGUI.py:423
msgid "Convert Any to Geo"
msgstr ""

#: appGUI/MainGUI.py:426
msgid "Convert Any to Gerber"
msgstr ""

#: appGUI/MainGUI.py:429
msgid "Convert Any to Excellon"
msgstr ""

#: appGUI/MainGUI.py:434
msgid "Join Objects"
msgstr ""

#: appGUI/MainGUI.py:437
msgid "Join Geo/Gerber/Exc -> Geo"
msgstr ""

#: appGUI/MainGUI.py:439
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""

#: appGUI/MainGUI.py:447
msgid "Join Excellon(s) -> Excellon"
msgstr ""

#: appGUI/MainGUI.py:449
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""

#: appGUI/MainGUI.py:453
msgid "Join Gerber(s) -> Gerber"
msgstr ""

#: appGUI/MainGUI.py:455
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr ""

#: appGUI/MainGUI.py:470 appGUI/MainGUI.py:755 appGUI/MainGUI.py:814 appGUI/MainGUI.py:873
msgid "DEL"
msgstr ""

#: appGUI/MainGUI.py:476 appGUI/MainGUI.py:1934
msgid "Num Move"
msgstr ""

#: appGUI/MainGUI.py:479 appGUI/MainGUI.py:1103 appGUI/MainGUI.py:2499
#: appGUI/MainGUI.py:4726
msgid "Set Origin"
msgstr ""

#: appGUI/MainGUI.py:479 appGUI/MainGUI.py:708 appGUI/MainGUI.py:4726 appGUI/MainGUI.py:5307
msgid "O"
msgstr ""

#: appGUI/MainGUI.py:482
msgid "Shift+O"
msgstr ""

#: appGUI/MainGUI.py:485 appGUI/MainGUI.py:1107 appGUI/MainGUI.py:2503 appMain.py:5578
#: appMain.py:5592
msgid "Custom Origin"
msgstr ""

#: appGUI/MainGUI.py:489 appGUI/MainGUI.py:1110 appGUI/MainGUI.py:2506
msgid "Jump to Location"
msgstr ""

#: appGUI/MainGUI.py:489 appGUI/MainGUI.py:4722 appGUI/MainGUI.py:5302
#: appGUI/MainGUI.py:5420 appGUI/MainGUI.py:5560
msgid "J"
msgstr ""

#: appGUI/MainGUI.py:492 appGUI/MainGUI.py:1112 appGUI/MainGUI.py:2508
#: appGUI/MainGUI.py:4875
msgid "Locate in Object"
msgstr ""

#: appGUI/MainGUI.py:492 appGUI/MainGUI.py:4875
msgid "Shift+J"
msgstr ""

#: appGUI/MainGUI.py:498 appMain.py:5003
msgid "Toggle Units"
msgstr ""

#: appGUI/MainGUI.py:498 appGUI/MainGUI.py:799 appGUI/MainGUI.py:4727 appGUI/MainGUI.py:5422
msgid "Q"
msgstr ""

#: appGUI/MainGUI.py:507 appGUI/MainGUI.py:1407
#: appGUI/preferences/PreferencesUIManager.py:1111
#: appGUI/preferences/PreferencesUIManager.py:1222
#: appGUI/preferences/PreferencesUIManager.py:1333
#: appGUI/preferences/PreferencesUIManager.py:1421 appMain.py:6549 appMain.py:6554
#: appMain.py:6574
msgid "Preferences"
msgstr ""

#: appGUI/MainGUI.py:507 appGUI/MainGUI.py:4877
msgid "Shift+P"
msgstr ""

#: appGUI/MainGUI.py:513 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:21
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:20
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:21
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:23 appObjects/AppObjectTemplate.py:545
#: appPlugins/ToolImage.py:694 appPlugins/ToolReport.py:170
msgid "Options"
msgstr ""

#: appGUI/MainGUI.py:516
msgid "Rotate Selection"
msgstr ""

#: appGUI/MainGUI.py:516
msgid "Shift+(R)"
msgstr ""

#: appGUI/MainGUI.py:522 appGUI/MainGUI.py:4881
msgid "Skew on X axis"
msgstr ""

#: appGUI/MainGUI.py:522 appGUI/MainGUI.py:4881 appGUI/MainGUI.py:5316
msgid "Shift+X"
msgstr ""

#: appGUI/MainGUI.py:525 appGUI/MainGUI.py:4882
msgid "Skew on Y axis"
msgstr ""

#: appGUI/MainGUI.py:525 appGUI/MainGUI.py:4882 appGUI/MainGUI.py:5317
msgid "Shift+Y"
msgstr ""

#: appGUI/MainGUI.py:531
msgid "Flip on X axis"
msgstr ""

#: appGUI/MainGUI.py:534
msgid "Flip on Y axis"
msgstr ""

#: appGUI/MainGUI.py:540
msgid "View source"
msgstr ""

#: appGUI/MainGUI.py:540 appGUI/MainGUI.py:5026
msgid "Alt+S"
msgstr ""

#: appGUI/MainGUI.py:543 appGUI/MainGUI.py:4796
msgid "Ctrl+D"
msgstr ""

#: appGUI/MainGUI.py:549
msgid "Experimental"
msgstr ""

#: appGUI/MainGUI.py:553 appMain.py:6732
msgid "3D Area"
msgstr ""

#: appGUI/MainGUI.py:560 appGUI/MainGUI.py:1751
msgid "View"
msgstr ""

#: appGUI/MainGUI.py:563 appGUI/MainGUI.py:5031
msgid "Enable all"
msgstr ""

#: appGUI/MainGUI.py:563 appGUI/MainGUI.py:5031
msgid "Alt+1"
msgstr ""

#: appGUI/MainGUI.py:566 appGUI/MainGUI.py:5032
msgid "Disable all"
msgstr ""

#: appGUI/MainGUI.py:566 appGUI/MainGUI.py:5032
msgid "Alt+2"
msgstr ""

#: appGUI/MainGUI.py:569
msgid "Enable non-selected"
msgstr ""

#: appGUI/MainGUI.py:569 appGUI/MainGUI.py:5033
msgid "Alt+3"
msgstr ""

#: appGUI/MainGUI.py:572
msgid "Disable non-selected"
msgstr ""

#: appGUI/MainGUI.py:572 appGUI/MainGUI.py:5034
msgid "Alt+4"
msgstr ""

#: appGUI/MainGUI.py:578 appGUI/MainGUI.py:1126 appGUI/MainGUI.py:1758
#: appGUI/MainGUI.py:2522 appGUI/MainGUI.py:4732
msgid "Zoom Fit"
msgstr ""

#: appGUI/MainGUI.py:578 appGUI/MainGUI.py:4732
msgid "V"
msgstr ""

#: appGUI/MainGUI.py:581 appGUI/MainGUI.py:1122 appGUI/MainGUI.py:2518
#: appGUI/MainGUI.py:4736
msgid "Zoom In"
msgstr ""

#: appGUI/MainGUI.py:581 appGUI/MainGUI.py:4736
msgid "="
msgstr ""

#: appGUI/MainGUI.py:584 appGUI/MainGUI.py:1124 appGUI/MainGUI.py:2520
#: appGUI/MainGUI.py:4735
msgid "Zoom Out"
msgstr ""

#: appGUI/MainGUI.py:584 appGUI/MainGUI.py:4735
msgid "-"
msgstr ""

#: appGUI/MainGUI.py:590
msgid "Redraw All"
msgstr ""

#: appGUI/MainGUI.py:590 appGUI/MainGUI.py:5120
msgid "F5"
msgstr ""

#: appGUI/MainGUI.py:595 appGUI/MainGUI.py:4872
msgid "Toggle Code Editor"
msgstr ""

#: appGUI/MainGUI.py:595 appGUI/MainGUI.py:4872
msgid "Shift+E"
msgstr ""

#: appGUI/MainGUI.py:599
msgid "Toggle FullScreen"
msgstr ""

#: appGUI/MainGUI.py:599 appGUI/MainGUI.py:5035
msgid "Alt+F10"
msgstr ""

#: appGUI/MainGUI.py:602 appGUI/MainGUI.py:4804
msgid "Toggle Plot Area"
msgstr ""

#: appGUI/MainGUI.py:602 appGUI/MainGUI.py:4804
msgid "Ctrl+F10"
msgstr ""

#: appGUI/MainGUI.py:605
msgid "Toggle Project/Properties/Tool"
msgstr ""

#: appGUI/MainGUI.py:605 appGUI/MainGUI.py:5123
msgid "`"
msgstr ""

#: appGUI/MainGUI.py:610
msgid "Toggle Grid Snap"
msgstr ""

#: appGUI/MainGUI.py:610 appGUI/MainGUI.py:4721
msgid "G"
msgstr ""

#: appGUI/MainGUI.py:613 appGUI/MainGUI.py:4873
msgid "Toggle Grid Lines"
msgstr ""

#: appGUI/MainGUI.py:613 appGUI/MainGUI.py:4873
msgid "Shift+G"
msgstr ""

#: appGUI/MainGUI.py:616
msgid "Toggle Axis"
msgstr ""

#: appGUI/MainGUI.py:616 appGUI/MainGUI.py:4870
msgid "Shift+A"
msgstr ""

#: appGUI/MainGUI.py:619
msgid "Toggle Workspace"
msgstr ""

#: appGUI/MainGUI.py:619 appGUI/MainGUI.py:4880
msgid "Shift+W"
msgstr ""

#: appGUI/MainGUI.py:622 appGUI/MainGUI.py:4874
msgid "Toggle HUD"
msgstr ""

#: appGUI/MainGUI.py:622 appGUI/MainGUI.py:4874
msgid "Shift+H"
msgstr ""

#: appGUI/MainGUI.py:627
msgid "Error Log"
msgstr ""

#: appGUI/MainGUI.py:632
msgid "Objects"
msgstr ""

#: appGUI/MainGUI.py:639 appObjects/ObjectCollection.py:1204
#: appObjects/ObjectCollection.py:1251 appPlugins/ToolIsolation.py:3933
#: appPlugins/ToolPunchGerber.py:2346
msgid "Deselect All"
msgstr ""

#: appGUI/MainGUI.py:644 appGUI/ObjectUI.py:362 appGUI/ObjectUI.py:744
#: appGUI/ObjectUI.py:1028 appGUI/ObjectUI.py:1418
msgid "Plugins"
msgstr ""

#: appGUI/MainGUI.py:648 appGUI/MainGUI.py:1134 appGUI/MainGUI.py:2528
msgid "Command Line"
msgstr ""

#: appGUI/MainGUI.py:648 appGUI/MainGUI.py:738 appGUI/MainGUI.py:856 appGUI/MainGUI.py:4730
#: appGUI/MainGUI.py:5310 appGUI/MainGUI.py:5565
msgid "S"
msgstr ""

#: appGUI/MainGUI.py:653
msgid "Help"
msgstr ""

#: appGUI/MainGUI.py:656
msgid "Online Help"
msgstr ""

#: appGUI/MainGUI.py:656 appGUI/MainGUI.py:5117
msgid "F1"
msgstr ""

#: appGUI/MainGUI.py:663 appMain.py:3977 appMain.py:3986
msgid "Bookmarks Manager"
msgstr ""

#: appGUI/MainGUI.py:668
msgid "Report a bug"
msgstr ""

#: appGUI/MainGUI.py:672
msgid "Excellon Specification"
msgstr ""

#: appGUI/MainGUI.py:675
msgid "Gerber Specification"
msgstr ""

#: appGUI/MainGUI.py:681
msgid "Shortcuts List"
msgstr ""

#: appGUI/MainGUI.py:681 appGUI/MainGUI.py:4715
msgid "F3"
msgstr ""

#: appGUI/MainGUI.py:684
msgid "YouTube Channel"
msgstr ""

#: appGUI/MainGUI.py:684 appGUI/MainGUI.py:5119
msgid "F4"
msgstr ""

#: appGUI/MainGUI.py:690
msgid "Donate"
msgstr ""

#: appGUI/MainGUI.py:694 appMain.py:3754
msgid "How To"
msgstr ""

#: appGUI/MainGUI.py:698 appMain.py:3225
msgid "About"
msgstr ""

#: appGUI/MainGUI.py:703 appGUI/MainGUI.py:1831
msgid "Geo Editor"
msgstr ""

#: appGUI/MainGUI.py:708 appGUI/MainGUI.py:1254 appGUI/MainGUI.py:2648
msgid "Add Circle"
msgstr ""

#: appGUI/MainGUI.py:712 appGUI/MainGUI.py:1256 appGUI/MainGUI.py:2650
msgid "Add Arc"
msgstr ""

#: appGUI/MainGUI.py:712 appGUI/MainGUI.py:791 appGUI/MainGUI.py:833 appGUI/MainGUI.py:5296
#: appGUI/MainGUI.py:5417 appGUI/MainGUI.py:5555
msgid "A"
msgstr ""

#: appGUI/MainGUI.py:716 appGUI/MainGUI.py:1258 appGUI/MainGUI.py:2652
msgid "Add Rectangle"
msgstr ""

#: appGUI/MainGUI.py:716 appGUI/MainGUI.py:807 appGUI/MainGUI.py:4729 appGUI/MainGUI.py:5309
#: appGUI/MainGUI.py:5423 appGUI/MainGUI.py:5564
msgid "R"
msgstr ""

#: appGUI/MainGUI.py:720 appGUI/MainGUI.py:1264 appGUI/MainGUI.py:2658
msgid "Add Polygon"
msgstr ""

#: appGUI/MainGUI.py:724 appGUI/MainGUI.py:1262 appGUI/MainGUI.py:2656
msgid "Add Path"
msgstr ""

#: appGUI/MainGUI.py:724 appGUI/MainGUI.py:830 appGUI/MainGUI.py:4728 appGUI/MainGUI.py:5308
#: appGUI/MainGUI.py:5563 appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:1399
msgid "P"
msgstr ""

#: appGUI/MainGUI.py:728 appGUI/MainGUI.py:1267 appGUI/MainGUI.py:2661
msgid "Add Text"
msgstr ""

#: appGUI/MainGUI.py:728 appGUI/MainGUI.py:836 appGUI/MainGUI.py:4731 appGUI/MainGUI.py:5311
#: appGUI/MainGUI.py:5424 appGUI/MainGUI.py:5566 appGUI/MainGUI.py:5567
msgid "T"
msgstr ""

#: appGUI/MainGUI.py:732 appGUI/MainGUI.py:1279 appGUI/MainGUI.py:2671
msgid "Polygon Union"
msgstr ""

#: appGUI/MainGUI.py:732 appGUI/MainGUI.py:5312
msgid "U"
msgstr ""

#: appGUI/MainGUI.py:735 appGUI/MainGUI.py:1284 appGUI/MainGUI.py:2676
msgid "Polygon Intersection"
msgstr ""

#: appGUI/MainGUI.py:738 appGUI/MainGUI.py:2678
msgid "Polygon Subtraction"
msgstr ""

#: appGUI/MainGUI.py:742 appGUI/MainGUI.py:1864 appGUI/MainGUI.py:2680
msgid "Alt Subtraction"
msgstr ""

#: appGUI/MainGUI.py:747 appGUI/MainGUI.py:1298 appGUI/MainGUI.py:2684
msgid "Cut Path"
msgstr ""

#: appGUI/MainGUI.py:752
msgid "Copy Geom"
msgstr ""

#: appGUI/MainGUI.py:752 appGUI/MainGUI.py:811 appGUI/MainGUI.py:870 appGUI/MainGUI.py:5298
#: appGUI/MainGUI.py:5418 appGUI/MainGUI.py:5557
msgid "C"
msgstr ""

#: appGUI/MainGUI.py:760 appGUI/MainGUI.py:820 appGUI/MainGUI.py:878 appGUI/MainGUI.py:4724
#: appGUI/MainGUI.py:5304 appGUI/MainGUI.py:5305 appGUI/MainGUI.py:5421
#: appGUI/MainGUI.py:5561
msgid "M"
msgstr ""

#: appGUI/MainGUI.py:771 appGUI/MainGUI.py:5301
msgid "I"
msgstr ""

#: appGUI/MainGUI.py:775 appGUI/MainGUI.py:865 appGUI/MainGUI.py:5025 appGUI/MainGUI.py:5318
#: appGUI/MainGUI.py:5577
msgid "Alt+R"
msgstr ""

#: appGUI/MainGUI.py:780 appGUI/MainGUI.py:5303
msgid "Toggle Corner Snap"
msgstr ""

#: appGUI/MainGUI.py:780 appGUI/MainGUI.py:5303
msgid "K"
msgstr ""

#: appGUI/MainGUI.py:791 appGUI/MainGUI.py:1230 appGUI/MainGUI.py:1912
#: appGUI/MainGUI.py:2624 appGUI/MainGUI.py:5417
msgid "Add Drill Array"
msgstr ""

#: appGUI/MainGUI.py:794 appGUI/MainGUI.py:1228 appGUI/MainGUI.py:1910
#: appGUI/MainGUI.py:2622 appGUI/MainGUI.py:5419
msgid "Add Drill"
msgstr ""

#: appGUI/MainGUI.py:799 appGUI/MainGUI.py:1234 appGUI/MainGUI.py:1917
#: appGUI/MainGUI.py:2630 appGUI/MainGUI.py:5422
msgid "Add Slot Array"
msgstr ""

#: appGUI/MainGUI.py:802 appGUI/MainGUI.py:1232 appGUI/MainGUI.py:1915
#: appGUI/MainGUI.py:2628 appGUI/MainGUI.py:5425
msgid "Add Slot"
msgstr ""

#: appGUI/MainGUI.py:802 appGUI/MainGUI.py:5425
msgid "W"
msgstr ""

#: appGUI/MainGUI.py:807 appGUI/MainGUI.py:1236 appGUI/MainGUI.py:1920
#: appGUI/MainGUI.py:2626 appGUI/MainGUI.py:5423
msgid "Resize Drill"
msgstr ""

#: appGUI/MainGUI.py:830 appGUI/MainGUI.py:1316 appGUI/MainGUI.py:2702
#: appGUI/MainGUI.py:5563
msgid "Add Pad"
msgstr ""

#: appGUI/MainGUI.py:836 appGUI/MainGUI.py:1320 appGUI/MainGUI.py:2706
#: appGUI/MainGUI.py:5566
msgid "Add Track"
msgstr ""

#: appGUI/MainGUI.py:839 appGUI/MainGUI.py:1322 appGUI/MainGUI.py:2708
#: appGUI/MainGUI.py:5562
msgid "Add Region"
msgstr ""

#: appGUI/MainGUI.py:844 appGUI/MainGUI.py:1324 appGUI/MainGUI.py:1887
#: appGUI/MainGUI.py:2710
msgid "Poligonize"
msgstr ""

#: appGUI/MainGUI.py:844 appGUI/MainGUI.py:5021 appGUI/MainGUI.py:5576
msgid "Alt+N"
msgstr ""

#: appGUI/MainGUI.py:847 appGUI/MainGUI.py:5559
msgid "Add SemiDisc"
msgstr ""

#: appGUI/MainGUI.py:850 appGUI/MainGUI.py:5558
msgid "Add Disc"
msgstr ""

#: appGUI/MainGUI.py:859 appGUI/MainGUI.py:1337 appGUI/MainGUI.py:1899
#: appGUI/MainGUI.py:2723
msgid "Mark Area"
msgstr ""

#: appGUI/MainGUI.py:859 appGUI/MainGUI.py:5008 appGUI/MainGUI.py:5575
msgid "Alt+A"
msgstr ""

#: appGUI/MainGUI.py:862 appGUI/MainGUI.py:1275 appGUI/MainGUI.py:1342
#: appGUI/MainGUI.py:1854 appGUI/MainGUI.py:1901 appGUI/MainGUI.py:2667
#: appGUI/MainGUI.py:2728
msgid "Eraser"
msgstr ""

#: appGUI/MainGUI.py:865 appMain.py:7079 appMain.py:7133 appMain.py:7181
msgid "Transform"
msgstr ""

#: appGUI/MainGUI.py:895
msgid "Enable Plot"
msgstr ""

#: appGUI/MainGUI.py:897
msgid "Disable Plot"
msgstr ""

#: appGUI/MainGUI.py:901 appGUI/MainGUI.py:1786
msgid "Set Color"
msgstr ""

#: appGUI/MainGUI.py:904 appGUI/MainGUI.py:1789 appMain.py:9125
msgid "Red"
msgstr ""

#: appGUI/MainGUI.py:907 appGUI/MainGUI.py:1792 appMain.py:9127
msgid "Blue"
msgstr ""

#: appGUI/MainGUI.py:910 appGUI/MainGUI.py:1795 appMain.py:9130
msgid "Yellow"
msgstr ""

#: appGUI/MainGUI.py:913 appGUI/MainGUI.py:1798 appMain.py:9132
msgid "Green"
msgstr ""

#: appGUI/MainGUI.py:916 appGUI/MainGUI.py:1801 appMain.py:9134
msgid "Purple"
msgstr ""

#: appGUI/MainGUI.py:919 appGUI/MainGUI.py:1804 appMain.py:9136
msgid "Brown"
msgstr ""

#: appGUI/MainGUI.py:922 appGUI/MainGUI.py:1807 appMain.py:9138
msgid "Indigo"
msgstr ""

#: appGUI/MainGUI.py:925 appGUI/MainGUI.py:1810 appMain.py:9140 appMain.py:9218
msgid "White"
msgstr ""

#: appGUI/MainGUI.py:928 appGUI/MainGUI.py:1813 appMain.py:9142
msgid "Black"
msgstr ""

#: appGUI/MainGUI.py:938 appGUI/MainGUI.py:1823 appMain.py:9183
msgid "Opacity"
msgstr ""

#: appGUI/MainGUI.py:941 appGUI/MainGUI.py:1826
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:45
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:65
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:67 appMain.py:9157
#: appPlugins/ToolDrilling.py:2467 appPlugins/ToolIsolation.py:3457
#: appPlugins/ToolMilling.py:4127 appPlugins/ToolNCC.py:4165 appPlugins/ToolPaint.py:3044
msgid "Default"
msgstr ""

#: appGUI/MainGUI.py:946
msgid "View Source"
msgstr ""

#: appGUI/MainGUI.py:959 appGUI/MainGUI.py:972 appGUI/MainGUI.py:1491 appGUI/MainGUI.py:1940
#: appMain.py:2693 appMain.py:2969 appMain.py:8618
msgid "Properties"
msgstr ""

#: appGUI/MainGUI.py:972 appGUI/MainGUI.py:1475 appGUI/MainGUI.py:1775 appMain.py:2699
#: appMain.py:2972 appMain.py:10599
msgid "Project"
msgstr ""

#: appGUI/MainGUI.py:989
msgid "File Toolbar"
msgstr ""

#: appGUI/MainGUI.py:994
msgid "Edit Toolbar"
msgstr ""

#: appGUI/MainGUI.py:999
msgid "View Toolbar"
msgstr ""

#: appGUI/MainGUI.py:1004
msgid "Shell Toolbar"
msgstr ""

#: appGUI/MainGUI.py:1009
msgid "Plugin Toolbar"
msgstr ""

#: appGUI/MainGUI.py:1014
msgid "Excellon Editor Toolbar"
msgstr ""

#: appGUI/MainGUI.py:1021
msgid "Geometry Editor Toolbar"
msgstr ""

#: appGUI/MainGUI.py:1026
msgid "Gerber Editor Toolbar"
msgstr ""

#: appGUI/MainGUI.py:1032 appGUI/MainGUI.py:2347
msgid "Delta Coordinates Toolbar"
msgstr ""

#: appGUI/MainGUI.py:1036 appGUI/MainGUI.py:2355
msgid "Coordinates Toolbar"
msgstr ""

#: appGUI/MainGUI.py:1040 appGUI/MainGUI.py:2363
msgid "Grid Toolbar"
msgstr ""

#: appGUI/MainGUI.py:1050 appGUI/MainGUI.py:2371
msgid "Status Toolbar"
msgstr ""

#: appGUI/MainGUI.py:1070
msgid "Save project"
msgstr ""

#: appGUI/MainGUI.py:1076 appGUI/MainGUI.py:2472
#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:21
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:18
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:20
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:21 appMain.py:2696 appMain.py:2967
msgid "Editor"
msgstr ""

#: appGUI/MainGUI.py:1099 appGUI/MainGUI.py:2495 appGUI/MainGUI.py:4799
#: appGUI/MainGUI.py:5321
msgid "Distance Tool"
msgstr ""

#: appGUI/MainGUI.py:1101 appGUI/MainGUI.py:2497
msgid "Distance Min Tool"
msgstr ""

#: appGUI/MainGUI.py:1118 appGUI/MainGUI.py:1762 appGUI/MainGUI.py:2514
msgid "Replot"
msgstr ""

#: appGUI/MainGUI.py:1120 appGUI/MainGUI.py:1760 appGUI/MainGUI.py:2516
msgid "Clear Plot"
msgstr ""

#: appGUI/MainGUI.py:1150 appGUI/MainGUI.py:2544 appGUI/ObjectUI.py:1422
#: appPlugins/ToolLevelling.py:167 appPlugins/ToolLevelling.py:1717
msgid "Levelling"
msgstr ""

#: appGUI/MainGUI.py:1159 appGUI/MainGUI.py:2553 appGUI/ObjectUI.py:237
#: appGUI/ObjectUI.py:426 appPlugins/ToolFollow.py:114 appPlugins/ToolFollow.py:650
msgid "Follow"
msgstr ""

#: appGUI/MainGUI.py:1170 appGUI/MainGUI.py:2564
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:117 appPlugins/ToolCutOut.py:2275
msgid "Panel"
msgstr ""

#: appGUI/MainGUI.py:1172 appGUI/MainGUI.py:2566 appGUI/ObjectUI.py:397
#: appPlugins/ToolFilm.py:142 appPlugins/ToolFilm.py:1222
msgid "Film"
msgstr ""

#: appGUI/MainGUI.py:1174 appGUI/MainGUI.py:2568 appPlugins/ToolDblSided.py:95
#: appPlugins/ToolDblSided.py:673
msgid "2-Sided"
msgstr ""

#: appGUI/MainGUI.py:1179 appGUI/MainGUI.py:2573 appGUI/MainGUI.py:5008
#: appPlugins/ToolAlignObjects.py:19 appPlugins/ToolAlignObjects.py:386
msgid "Align Objects"
msgstr ""

#: appGUI/MainGUI.py:1186 appGUI/MainGUI.py:2580 appGUI/MainGUI.py:5012
#: appPlugins/ToolExtract.py:38 appPlugins/ToolExtract.py:222 appPlugins/ToolExtract.py:986
msgid "Extract"
msgstr ""

#: appGUI/MainGUI.py:1188 appGUI/MainGUI.py:2582 appGUI/MainGUI.py:5017
#: appPlugins/ToolCopperThieving.py:128 appPlugins/ToolCopperThieving.py:1251
msgid "Copper Thieving"
msgstr ""

#: appGUI/MainGUI.py:1190 appGUI/MainGUI.py:2584 appGUI/MainGUI.py:5009
#: appPlugins/ToolMarkers.py:143 appPlugins/ToolMarkers.py:1216
msgid "Markers"
msgstr ""

#: appGUI/MainGUI.py:1192 appGUI/MainGUI.py:2586 appGUI/MainGUI.py:5015
#: appPlugins/ToolPunchGerber.py:66 appPlugins/ToolPunchGerber.py:257
#: appPlugins/ToolPunchGerber.py:1984 appPlugins/ToolPunchGerber.py:2357
msgid "Punch Gerber"
msgstr ""

#: appGUI/MainGUI.py:1194 appGUI/MainGUI.py:2588 appGUI/MainGUI.py:5010
#: appPlugins/ToolCalculators.py:85 appPlugins/ToolCalculators.py:501
msgid "Calculators"
msgstr ""

#: appGUI/MainGUI.py:1226 appGUI/MainGUI.py:1252 appGUI/MainGUI.py:1314
#: appGUI/MainGUI.py:2620 appGUI/MainGUI.py:2646 appGUI/MainGUI.py:2700
msgid "Select"
msgstr ""

#: appGUI/MainGUI.py:1271 appGUI/MainGUI.py:2663
msgid "Add Buffer"
msgstr ""

#: appGUI/MainGUI.py:1273 appGUI/MainGUI.py:2665
msgid "Paint Shape"
msgstr ""

#: appGUI/MainGUI.py:1281 appGUI/MainGUI.py:2673
msgid "Polygon Explode"
msgstr ""

#: appGUI/MainGUI.py:1287
msgid ""
"Polygon Subtraction. First selected is the target.\n"
"The rest of the selected is subtracted from the first.\n"
"First selected is replaced by the result."
msgstr ""

#: appGUI/MainGUI.py:1292
msgid ""
"Alt Subtraction. First selected is the target.\n"
"The rest of the selected is subtracted from the first.\n"
"First selected is kept besides the result."
msgstr ""

#: appGUI/MainGUI.py:1300
msgid "Copy Shape(s)"
msgstr ""

#: appGUI/MainGUI.py:1305 appGUI/MainGUI.py:1350 appGUI/MainGUI.py:1868
#: appGUI/MainGUI.py:1905 appGUI/MainGUI.py:2690 appGUI/MainGUI.py:2736
#: appGUI/MainGUI.py:5027 appGUI/ObjectUI.py:92 appGUI/ObjectUI.py:147
msgid "Transformations"
msgstr ""

#: appGUI/MainGUI.py:1308 appGUI/MainGUI.py:2694
msgid "Move Objects"
msgstr ""

#: appGUI/MainGUI.py:1327 appGUI/MainGUI.py:1889 appGUI/MainGUI.py:2713
msgid "SemiDisc"
msgstr ""

#: appGUI/MainGUI.py:1329 appGUI/MainGUI.py:1891 appGUI/MainGUI.py:2715
msgid "Disc"
msgstr ""

#: appGUI/MainGUI.py:1339 appGUI/MainGUI.py:2725
msgid "Import Shape"
msgstr ""

#: appGUI/MainGUI.py:1361
msgid "Snap to grid"
msgstr ""

#: appGUI/MainGUI.py:1364
msgid "Grid X snapping distance"
msgstr ""

#: appGUI/MainGUI.py:1369
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""

#: appGUI/MainGUI.py:1376
msgid "Grid Y snapping distance"
msgstr ""

#: appGUI/MainGUI.py:1387
msgid "Snap to corner"
msgstr ""

#: appGUI/MainGUI.py:1391 appGUI/preferences/general/GeneralAPPSetGroupUI.py:76
msgid "Max. magnet distance"
msgstr ""

#: appGUI/MainGUI.py:1401
msgid "Toggle the display of axis on canvas"
msgstr ""

#: appGUI/MainGUI.py:1413
msgid "HUD (Heads up display)"
msgstr ""

#: appGUI/MainGUI.py:1419 appGUI/preferences/general/GeneralAPPSetGroupUI.py:104
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""

#: appGUI/MainGUI.py:1432
msgid ""
"Relative measurement.\n"
"Reference is last click position"
msgstr ""

#: appGUI/MainGUI.py:1440
msgid ""
"Absolute measurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""

#: appGUI/MainGUI.py:1447
msgid "TCL Shell"
msgstr ""

#: appGUI/MainGUI.py:1521 appGUI/MainGUI.py:1529 appGUI/MainGUI.py:2879
#: appGUI/MainGUI.py:2885 appMain.py:2985 appMain.py:10382
msgid "Plot Area"
msgstr ""

#: appGUI/MainGUI.py:1623
msgid "CNC-JOB"
msgstr ""

#: appGUI/MainGUI.py:1633
msgid "Engraving"
msgstr ""

#: appGUI/MainGUI.py:1643
msgid "Processing"
msgstr ""

#: appGUI/MainGUI.py:1653
msgid "Extra Plugins"
msgstr ""

#: appGUI/MainGUI.py:1664
msgid "UTILITIES"
msgstr ""

#: appGUI/MainGUI.py:1682 appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:216
msgid "Restore Defaults"
msgstr ""

#: appGUI/MainGUI.py:1686
msgid ""
"Restore the entire set of default values\n"
"to the initial values loaded after first launch."
msgstr ""

#: appGUI/MainGUI.py:1691
msgid "Open Pref Folder"
msgstr ""

#: appGUI/MainGUI.py:1695
msgid "Open the folder where FlatCAM save the preferences files."
msgstr ""

#: appGUI/MainGUI.py:1699 appGUI/MainGUI.py:2425
msgid "Clear GUI Settings"
msgstr ""

#: appGUI/MainGUI.py:1704
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style etc."
msgstr ""

#: appGUI/MainGUI.py:1720
msgid "Apply the current preferences without saving to a file."
msgstr ""

#: appGUI/MainGUI.py:1728
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""

#: appGUI/MainGUI.py:1736
msgid "Will not save the changes and will close the preferences window."
msgstr ""

#: appGUI/MainGUI.py:1753
msgid "Toggle Visibility"
msgstr ""

#: appGUI/MainGUI.py:1780
msgid "Grids"
msgstr ""

#: appGUI/MainGUI.py:1858
msgid "Union"
msgstr ""

#: appGUI/MainGUI.py:1860
msgid "Intersection"
msgstr ""

#: appGUI/MainGUI.py:1862
msgid "Subtraction"
msgstr ""

#: appGUI/MainGUI.py:1877
msgid "Pad"
msgstr ""

#: appGUI/MainGUI.py:1879
msgid "Pad Array"
msgstr ""

#: appGUI/MainGUI.py:1883
msgid "Track"
msgstr ""

#: appGUI/MainGUI.py:1885
msgid "Region"
msgstr ""

#: appGUI/MainGUI.py:1908
msgid "Exc Editor"
msgstr ""

#: appGUI/MainGUI.py:1936
msgid "Move2Origin"
msgstr ""

#: appGUI/MainGUI.py:1965
msgid "Application units"
msgstr ""

#: appGUI/MainGUI.py:2066
msgid "Lock Toolbars"
msgstr ""

#: appGUI/MainGUI.py:2324
msgid "Detachable Tabs"
msgstr ""

#: appGUI/MainGUI.py:2408
msgid "FlatCAM Preferences Folder opened."
msgstr ""

#: appGUI/MainGUI.py:2426
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr ""

#: appGUI/MainGUI.py:2433 appGUI/preferences/PreferencesUIManager.py:1152
#: appGUI/preferences/PreferencesUIManager.py:1392 appMain.py:2763 appMain.py:4050
#: appMain.py:6855 appMain.py:10259 appMain.py:12057 appPlugins/ToolImage.py:172
#: appTranslation.py:120 appTranslation.py:225
msgid "Yes"
msgstr ""

#: appGUI/MainGUI.py:2434 appGUI/preferences/PreferencesUIManager.py:1393 appMain.py:2764
#: appMain.py:4051 appMain.py:6856 appMain.py:10260 appMain.py:12058
#: appPlugins/ToolImage.py:173 appTranslation.py:121 appTranslation.py:226
msgid "No"
msgstr ""

#: appGUI/MainGUI.py:2686
msgid "Copy Objects"
msgstr ""

#: appGUI/MainGUI.py:2760
msgid "Key Shortcut List"
msgstr ""

#: appGUI/MainGUI.py:3480
msgid ""
"Please first select a geometry item to be cut\n"
"then select the geometry item that will be cut\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""

#: appGUI/MainGUI.py:3486 appGUI/MainGUI.py:3673 appGUI/MainGUI.py:3723
#: appGUI/MainGUI.py:3747
msgid "Warning"
msgstr ""

#: appGUI/MainGUI.py:3669
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""

#: appGUI/MainGUI.py:3719
msgid ""
"Please select geometry items \n"
"on which to perform Subtraction."
msgstr ""

#: appGUI/MainGUI.py:3743
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""

#: appGUI/MainGUI.py:4270 appMain.py:5156 appPlugins/ToolIsolation.py:992
#: appPlugins/ToolNCC.py:1363 appPlugins/ToolPaint.py:651 appPlugins/ToolSolderPaste.py:364
#: appPlugins/ToolSolderPaste.py:1311
msgid "New Tool"
msgstr ""

#: appGUI/MainGUI.py:4271 appMain.py:5157 appPlugins/ToolIsolation.py:993
#: appPlugins/ToolNCC.py:1364 appPlugins/ToolPaint.py:652 appPlugins/ToolSolderPaste.py:365
msgid "Enter a Tool Diameter"
msgstr ""

#: appGUI/MainGUI.py:4283 appMain.py:5173 appPlugins/ToolIsolation.py:1014
#: appPlugins/ToolNCC.py:1385 appPlugins/ToolPaint.py:665 appPlugins/ToolSolderPaste.py:377
msgid "Adding Tool cancelled"
msgstr ""

#: appGUI/MainGUI.py:4563 appMain.py:4036
msgid "Application is saving the project. Please wait ..."
msgstr ""

#: appGUI/MainGUI.py:4599
msgid "Shortcut Key List"
msgstr ""

#: appGUI/MainGUI.py:4611
msgid "General Shortcut list"
msgstr ""

#: appGUI/MainGUI.py:4715
msgid "SHOW SHORTCUT LIST"
msgstr ""

#: appGUI/MainGUI.py:4716
msgid "1"
msgstr ""

#: appGUI/MainGUI.py:4716
msgid "Switch to Project Tab"
msgstr ""

#: appGUI/MainGUI.py:4717
msgid "2"
msgstr ""

#: appGUI/MainGUI.py:4717
msgid "Switch to Selected Tab"
msgstr ""

#: appGUI/MainGUI.py:4718
msgid "3"
msgstr ""

#: appGUI/MainGUI.py:4718
msgid "Switch to Tool Tab"
msgstr ""

#: appGUI/MainGUI.py:4719
msgid "New Gerber"
msgstr ""

#: appGUI/MainGUI.py:4720
msgid "Edit Object (if selected)"
msgstr ""

#: appGUI/MainGUI.py:4721 appMain.py:7252
msgid "Grid On/Off"
msgstr ""

#: appGUI/MainGUI.py:4722
msgid "Jump to Coordinates"
msgstr ""

#: appGUI/MainGUI.py:4723
msgid "New Excellon"
msgstr ""

#: appGUI/MainGUI.py:4724
msgid "Move Obj"
msgstr ""

#: appGUI/MainGUI.py:4725
msgid "New Geometry"
msgstr ""

#: appGUI/MainGUI.py:4727
msgid "Change Units"
msgstr ""

#: appGUI/MainGUI.py:4728
msgid "Open Properties Plugin"
msgstr ""

#: appGUI/MainGUI.py:4729
msgid "Rotate by 90 degree CW"
msgstr ""

#: appGUI/MainGUI.py:4730
msgid "Shell Toggle"
msgstr ""

#: appGUI/MainGUI.py:4731
msgid "Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"
msgstr ""

#: appGUI/MainGUI.py:4733
msgid "Flip on X_axis"
msgstr ""

#: appGUI/MainGUI.py:4734
msgid "Flip on Y_axis"
msgstr ""

#: appGUI/MainGUI.py:4795
msgid "Copy Obj"
msgstr ""

#: appGUI/MainGUI.py:4796
msgid "Open Tools Database"
msgstr ""

#: appGUI/MainGUI.py:4797
msgid "Open Excellon File"
msgstr ""

#: appGUI/MainGUI.py:4798
msgid "Open Gerber File"
msgstr ""

#: appGUI/MainGUI.py:4799 appGUI/MainGUI.py:5321
msgid "Ctrl+M"
msgstr ""

#: appGUI/MainGUI.py:4870
msgid "Toggle the axis"
msgstr ""

#: appGUI/MainGUI.py:4871
msgid "Shift+C"
msgstr ""

#: appGUI/MainGUI.py:4871
msgid "Copy Obj_Name"
msgstr ""

#: appGUI/MainGUI.py:4876 appGUI/MainGUI.py:5315 appGUI/MainGUI.py:5426
#: appGUI/MainGUI.py:5572
msgid "Shift+M"
msgstr ""

#: appGUI/MainGUI.py:4876 appGUI/MainGUI.py:5315 appGUI/MainGUI.py:5426
#: appGUI/MainGUI.py:5572
msgid "Distance Minimum Tool"
msgstr ""

#: appGUI/MainGUI.py:4877
msgid "Open Preferences Window"
msgstr ""

#: appGUI/MainGUI.py:4878
msgid "Shift+R"
msgstr ""

#: appGUI/MainGUI.py:4878
msgid "Rotate by 90 degree CCW"
msgstr ""

#: appGUI/MainGUI.py:4879
msgid "Run a Script"
msgstr ""

#: appGUI/MainGUI.py:4880
msgid "Toggle the workspace"
msgstr ""

#: appGUI/MainGUI.py:5009
msgid "Alt+B"
msgstr ""

#: appGUI/MainGUI.py:5010
msgid "Alt+C"
msgstr ""

#: appGUI/MainGUI.py:5011
msgid "Alt+D"
msgstr ""

#: appGUI/MainGUI.py:5011
msgid "2-Sided PCB"
msgstr ""

#: appGUI/MainGUI.py:5012
msgid "Alt+E"
msgstr ""

#: appGUI/MainGUI.py:5013
msgid "Alt+F"
msgstr ""

#: appGUI/MainGUI.py:5013 appPlugins/ToolFiducials.py:129 appPlugins/ToolFiducials.py:894
msgid "Fiducials"
msgstr ""

#: appGUI/MainGUI.py:5014
msgid "Alt+G"
msgstr ""

#: appGUI/MainGUI.py:5014 appPlugins/ToolInvertGerber.py:91
#: appPlugins/ToolInvertGerber.py:194 appPlugins/ToolInvertGerber.py:282
msgid "Invert Gerber"
msgstr ""

#: appGUI/MainGUI.py:5015
msgid "Alt+H"
msgstr ""

#: appGUI/MainGUI.py:5016
msgid "Alt+I"
msgstr ""

#: appGUI/MainGUI.py:5017
msgid "Alt+J"
msgstr ""

#: appGUI/MainGUI.py:5018
msgid "Alt+K"
msgstr ""

#: appGUI/MainGUI.py:5018
msgid "Solder Paste Dispensing"
msgstr ""

#: appGUI/MainGUI.py:5019
msgid "Alt+L"
msgstr ""

#: appGUI/MainGUI.py:5019
msgid "Film PCB"
msgstr ""

#: appGUI/MainGUI.py:5020
msgid "Alt+M"
msgstr ""

#: appGUI/MainGUI.py:5021 appPlugins/ToolNCC.py:2263 appPlugins/ToolNCC.py:2265
#: appPlugins/ToolNCC.py:2855 appPlugins/ToolNCC.py:2857
msgid "Non-Copper Clearing"
msgstr ""

#: appGUI/MainGUI.py:5022
msgid "Alt+O"
msgstr ""

#: appGUI/MainGUI.py:5022 appPlugins/ToolIsolation.py:3496 appPlugins/ToolNCC.py:4212
msgid "Optimal"
msgstr ""

#: appGUI/MainGUI.py:5023
msgid "Alt+P"
msgstr ""

#: appGUI/MainGUI.py:5023
msgid "Paint Area"
msgstr ""

#: appGUI/MainGUI.py:5024
msgid "Alt+Q"
msgstr ""

#: appGUI/MainGUI.py:5024 appPlugins/ToolQRCode.py:112 appPlugins/ToolQRCode.py:708
msgid "QRCode"
msgstr ""

#: appGUI/MainGUI.py:5025
msgid "Rules Check"
msgstr ""

#: appGUI/MainGUI.py:5026
msgid "View File Source"
msgstr ""

#: appGUI/MainGUI.py:5027
msgid "Alt+T"
msgstr ""

#: appGUI/MainGUI.py:5028
msgid "Alt+W"
msgstr ""

#: appGUI/MainGUI.py:5028 appPlugins/ToolSub.py:151 appPlugins/ToolSub.py:764
msgid "Subtract"
msgstr ""

#: appGUI/MainGUI.py:5029 appGUI/MainGUI.py:5319
msgid "Alt+X"
msgstr ""

#: appGUI/MainGUI.py:5029
msgid "Cutout PCB"
msgstr ""

#: appGUI/MainGUI.py:5030
msgid "Alt+Z"
msgstr ""

#: appGUI/MainGUI.py:5030 appPlugins/ToolPanelize.py:20
msgid "Panelize PCB"
msgstr ""

#: appGUI/MainGUI.py:5033
msgid "Enable Non-selected Objects"
msgstr ""

#: appGUI/MainGUI.py:5034
msgid "Disable Non-selected Objects"
msgstr ""

#: appGUI/MainGUI.py:5035
msgid "Toggle Full Screen"
msgstr ""

#: appGUI/MainGUI.py:5061
msgid "Ctrl+Alt+X"
msgstr ""

#: appGUI/MainGUI.py:5061
msgid "Abort current task (gracefully)"
msgstr ""

#: appGUI/MainGUI.py:5065
msgid "Ctrl+Shift+V"
msgstr ""

#: appGUI/MainGUI.py:5065
msgid "Paste Special. Will convert a Windows path style to the one required in Tcl Shell"
msgstr ""

#: appGUI/MainGUI.py:5117
msgid "Open Online Manual"
msgstr ""

#: appGUI/MainGUI.py:5118
msgid "F2"
msgstr ""

#: appGUI/MainGUI.py:5118
msgid "Rename Objects"
msgstr ""

#: appGUI/MainGUI.py:5119
msgid "Open Online Tutorials"
msgstr ""

#: appGUI/MainGUI.py:5120
msgid "Refresh Plots"
msgstr ""

#: appGUI/MainGUI.py:5121 appPlugins/ToolSolderPaste.py:1745
msgid "Delete Object"
msgstr ""

#: appGUI/MainGUI.py:5122 appGUI/MainGUI.py:5428
msgid "Alternate: Delete Tool"
msgstr ""

#: appGUI/MainGUI.py:5123
msgid "(left to Key_1)Toggle Notebook Area (Left Side)"
msgstr ""

#: appGUI/MainGUI.py:5124 appGUI/MainGUI.py:5324 appGUI/MainGUI.py:5430
#: appGUI/MainGUI.py:5571
msgid "Space"
msgstr ""

#: appGUI/MainGUI.py:5124
msgid "En(Dis)able Obj Plot"
msgstr ""

#: appGUI/MainGUI.py:5125 appGUI/MainGUI.py:5326 appGUI/MainGUI.py:5429
#: appGUI/MainGUI.py:5570
msgid "Esc"
msgstr ""

#: appGUI/MainGUI.py:5125
msgid "Deselects all objects"
msgstr ""

#: appGUI/MainGUI.py:5140
msgid "Editor Shortcut list"
msgstr ""

#: appGUI/MainGUI.py:5295
msgid "GEOMETRY EDITOR"
msgstr ""

#: appGUI/MainGUI.py:5296
msgid "Draw an Arc"
msgstr ""

#: appGUI/MainGUI.py:5297 appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:215
msgid "Buffer Tool"
msgstr ""

#: appGUI/MainGUI.py:5298
msgid "Copy Geo Item"
msgstr ""

#: appGUI/MainGUI.py:5299
msgid "Within Add Arc will toogle the ARC direction: CW or CCW"
msgstr ""

#: appGUI/MainGUI.py:5300
msgid "Polygon Intersection Tool"
msgstr ""

#: appGUI/MainGUI.py:5301
msgid "Geo Paint Tool"
msgstr ""

#: appGUI/MainGUI.py:5302 appGUI/MainGUI.py:5420 appGUI/MainGUI.py:5560
msgid "Jump to Location (x, y)"
msgstr ""

#: appGUI/MainGUI.py:5304
msgid "Move Geo Item"
msgstr ""

#: appGUI/MainGUI.py:5305
msgid "Within Add Arc will cycle through the ARC modes"
msgstr ""

#: appGUI/MainGUI.py:5306
msgid "Draw a Polygon"
msgstr ""

#: appGUI/MainGUI.py:5307
msgid "Draw a Circle"
msgstr ""

#: appGUI/MainGUI.py:5308
msgid "Draw a Path"
msgstr ""

#: appGUI/MainGUI.py:5309
msgid "Draw Rectangle"
msgstr ""

#: appGUI/MainGUI.py:5310
msgid "Polygon Subtraction Tool"
msgstr ""

#: appGUI/MainGUI.py:5311
msgid "Add Text Tool"
msgstr ""

#: appGUI/MainGUI.py:5312
msgid "Polygon Union Tool"
msgstr ""

#: appGUI/MainGUI.py:5313
msgid "Flip shape on X axis"
msgstr ""

#: appGUI/MainGUI.py:5314
msgid "Flip shape on Y axis"
msgstr ""

#: appGUI/MainGUI.py:5316
msgid "Skew shape on X axis"
msgstr ""

#: appGUI/MainGUI.py:5317
msgid "Skew shape on Y axis"
msgstr ""

#: appGUI/MainGUI.py:5318
msgid "Editor Transformation Tool"
msgstr ""

#: appGUI/MainGUI.py:5319
msgid "Offset shape on X axis"
msgstr ""

#: appGUI/MainGUI.py:5320
msgid "Alt+Y"
msgstr ""

#: appGUI/MainGUI.py:5320
msgid "Offset shape on Y axis"
msgstr ""

#: appGUI/MainGUI.py:5322 appGUI/MainGUI.py:5431 appGUI/MainGUI.py:5574
msgid "Save Object and Exit Editor"
msgstr ""

#: appGUI/MainGUI.py:5323
msgid "Polygon Cut Tool"
msgstr ""

#: appGUI/MainGUI.py:5324
msgid "Rotate Geometry"
msgstr ""

#: appGUI/MainGUI.py:5325
msgid "ENTER"
msgstr ""

#: appGUI/MainGUI.py:5325
msgid "Finish drawing for certain tools"
msgstr ""

#: appGUI/MainGUI.py:5326 appGUI/MainGUI.py:5429 appGUI/MainGUI.py:5570
msgid "Abort and return to Select"
msgstr ""

#: appGUI/MainGUI.py:5416
msgid "EXCELLON EDITOR"
msgstr ""

#: appGUI/MainGUI.py:5424
msgid "Add a new Tool"
msgstr ""

#: appGUI/MainGUI.py:5430
msgid "Toggle Slot direction"
msgstr ""

#: appGUI/MainGUI.py:5432
msgid "Ctrl+Space"
msgstr ""

#: appGUI/MainGUI.py:5432 appGUI/MainGUI.py:5571
msgid "Toggle array direction"
msgstr ""

#: appGUI/MainGUI.py:5554
msgid "GERBER EDITOR"
msgstr ""

#: appGUI/MainGUI.py:5564
msgid "Within Track & Region Tools will cycle in REVERSE the bend modes"
msgstr ""

#: appGUI/MainGUI.py:5567
msgid "Within Track & Region Tools will cycle FORWARD the bend modes"
msgstr ""

#: appGUI/MainGUI.py:5569
msgid "Alternate: Delete Apertures"
msgstr ""

#: appGUI/MainGUI.py:5573
msgid "Eraser Tool"
msgstr ""

#: appGUI/MainGUI.py:5575 appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:265
msgid "Mark Area Tool"
msgstr ""

#: appGUI/MainGUI.py:5576
msgid "Poligonize Tool"
msgstr ""

#: appGUI/MainGUI.py:5577
msgid "Transformation Tool"
msgstr ""

#: appGUI/ObjectUI.py:32
msgid "App Object"
msgstr ""

#: appGUI/ObjectUI.py:94 appGUI/ObjectUI.py:150
msgid "Geometrical transformations of the current object."
msgstr ""

#: appGUI/ObjectUI.py:116
msgid ""
"Factor by which to multiply\n"
"geometric features of this object.\n"
"Expressions are allowed. E.g: 1/25.4"
msgstr ""

#: appGUI/ObjectUI.py:123
msgid "Perform scaling operation."
msgstr ""

#: appGUI/ObjectUI.py:133
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format.\n"
"Expressions are allowed. E.g: (1/3.2, 0.5*3)"
msgstr ""

#: appGUI/ObjectUI.py:140
msgid "Perform the offset operation."
msgstr ""

#: appGUI/ObjectUI.py:183
msgid "Gerber Object"
msgstr ""

#: appGUI/ObjectUI.py:185 appGUI/ObjectUI.py:580 appGUI/ObjectUI.py:875
#: appGUI/ObjectUI.py:1193
msgid "General Information"
msgstr ""

#: appGUI/ObjectUI.py:186 appGUI/ObjectUI.py:581 appGUI/ObjectUI.py:876
#: appGUI/ObjectUI.py:1194
msgid "General data about the object."
msgstr ""

#: appGUI/ObjectUI.py:200 appGUI/ObjectUI.py:596 appGUI/ObjectUI.py:890
#: appGUI/ObjectUI.py:1209 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:27
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:30
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:29
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:28
msgid "Plot Options"
msgstr ""

#: appGUI/ObjectUI.py:205 appGUI/ObjectUI.py:599
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:47
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:50
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137
#: appPlugins/ToolCopperThieving.py:1424
msgid "Solid"
msgstr ""

#: appGUI/ObjectUI.py:207 appGUI/preferences/gerber/GerberGenPrefGroupUI.py:52
msgid "Solid color polygons."
msgstr ""

#: appGUI/ObjectUI.py:212 appGUI/ObjectUI.py:605 appGUI/ObjectUI.py:896
msgid "Multi-Color"
msgstr ""

#: appGUI/ObjectUI.py:214 appGUI/ObjectUI.py:607 appGUI/ObjectUI.py:898
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:56
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:48
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:59
msgid "Draw polygons in different colors."
msgstr ""

#: appGUI/ObjectUI.py:229 appGUI/ObjectUI.py:674
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:40
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:39
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:43
msgid "Plot"
msgstr ""

#: appGUI/ObjectUI.py:230 appGUI/ObjectUI.py:676 appGUI/ObjectUI.py:979
#: appGUI/ObjectUI.py:1377 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:38
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:41
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:45 appPlugins/ToolMilling.py:4010
msgid "Plot (show) this object."
msgstr ""

#: appGUI/ObjectUI.py:238 appGUI/ObjectUI.py:429
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:37 appPlugins/ToolFollow.py:750
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""

#: appGUI/ObjectUI.py:247 appGUI/ObjectUI.py:630 appGUI/ObjectUI.py:918
#: appGUI/ObjectUI.py:1243
msgid "Start the Object Editor"
msgstr ""

#: appGUI/ObjectUI.py:252 appGUI/ObjectUI.py:635 appGUI/ObjectUI.py:923
#: appGUI/ObjectUI.py:1247
msgid "INFO"
msgstr ""

#: appGUI/ObjectUI.py:254 appGUI/ObjectUI.py:637 appGUI/ObjectUI.py:925
#: appGUI/ObjectUI.py:1249
msgid "Show the Object Attributes."
msgstr ""

#: appGUI/ObjectUI.py:276 appGUI/ObjectUI.py:659 appGUI/ObjectUI.py:947
#: appGUI/ObjectUI.py:1343
msgid "Tools/apertures in the loaded object."
msgstr ""

#: appGUI/ObjectUI.py:297 appGUI/ObjectUI.py:669
#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:44
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:46
msgid "Toggle the display of the Tools Table."
msgstr ""

#: appGUI/ObjectUI.py:306
msgid "Mark All"
msgstr ""

#: appGUI/ObjectUI.py:308
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""

#: appGUI/ObjectUI.py:338 appPlugins/ToolExtract.py:1114 appPlugins/ToolPunchGerber.py:2126
msgid "Mark the aperture instances on canvas."
msgstr ""

#: appGUI/ObjectUI.py:345 appPlugins/ToolIsolation.py:3982
msgid "Buffer Solid Geometry"
msgstr ""

#: appGUI/ObjectUI.py:347 appPlugins/ToolIsolation.py:3984
msgid ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."
msgstr ""

#: appGUI/ObjectUI.py:373
msgid "Isolation Routing"
msgstr ""

#: appGUI/ObjectUI.py:376 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:27
#: appPlugins/ToolIsolation.py:3366
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut around polygons."
msgstr ""

#: appGUI/ObjectUI.py:385
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""

#: appGUI/ObjectUI.py:400 appPlugins/ToolFilm.py:1242
msgid "Create a positive/negative film for UV exposure."
msgstr ""

#: appGUI/ObjectUI.py:414 appGUI/ObjectUI.py:1059 appPlugins/ToolNCC.py:4595
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""

#: appGUI/ObjectUI.py:442 appGUI/ObjectUI.py:775 appGUI/ObjectUI.py:1076
#: appPlugins/ToolEtchCompensation.py:327
msgid "Utilities"
msgstr ""

#: appGUI/ObjectUI.py:444 appGUI/ObjectUI.py:777 appGUI/ObjectUI.py:1078
msgid "Show the Utilities."
msgstr ""

#: appGUI/ObjectUI.py:461 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:28
msgid "Non-copper regions"
msgstr ""

#: appGUI/ObjectUI.py:463 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:30
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""

#: appGUI/ObjectUI.py:478 appGUI/ObjectUI.py:524
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:46
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:80
msgid "Boundary Margin"
msgstr ""

#: appGUI/ObjectUI.py:480 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:48
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""

#: appGUI/ObjectUI.py:497 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:64
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:211 appPlugins/ToolFilm.py:1534
msgid "Resulting geometry will have rounded corners."
msgstr ""

#: appGUI/ObjectUI.py:500 appGUI/ObjectUI.py:545 appPlugins/ToolCutOut.py:2669
#: appPlugins/ToolFollow.py:748 appPlugins/ToolIsolation.py:3967 appPlugins/ToolNCC.py:4592
#: appPlugins/ToolPaint.py:3339 appPlugins/ToolSolderPaste.py:1654
msgid "Generate Geometry"
msgstr ""

#: appGUI/ObjectUI.py:509 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:71
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:134 appPlugins/ToolPanelize.py:1222
#: appPlugins/ToolQRCode.py:888
msgid "Bounding Box"
msgstr ""

#: appGUI/ObjectUI.py:511
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""

#: appGUI/ObjectUI.py:526 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:82
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""

#: appGUI/ObjectUI.py:539 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:95
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""

#: appGUI/ObjectUI.py:548
msgid "Generate the Geometry object."
msgstr ""

#: appGUI/ObjectUI.py:575
msgid "Excellon Object"
msgstr ""

#: appGUI/ObjectUI.py:601
msgid "Solid circles."
msgstr ""

#: appGUI/ObjectUI.py:709 appPlugins/ToolDrilling.py:2445 appPlugins/ToolMilling.py:4034
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."
msgstr ""

#: appGUI/ObjectUI.py:714 appGUI/ObjectUI.py:1002 appPlugins/ToolDrilling.py:2450
#: appPlugins/ToolIsolation.py:3444 appPlugins/ToolMilling.py:4039
#: appPlugins/ToolMilling.py:4157 appPlugins/ToolNCC.py:4141 appPlugins/ToolPaint.py:3023
msgid ""
"Tool Diameter. Its value\n"
"is the cut width into the material."
msgstr ""

#: appGUI/ObjectUI.py:717 appPlugins/ToolDrilling.py:2453 appPlugins/ToolMilling.py:4042
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""

#: appGUI/ObjectUI.py:720 appPlugins/ToolDrilling.py:2456 appPlugins/ToolMilling.py:4045
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""

#: appGUI/ObjectUI.py:723
msgid "Show the color of the drill holes when using multi-color."
msgstr ""

#: appGUI/ObjectUI.py:725
msgid ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."
msgstr ""

#: appGUI/ObjectUI.py:734 appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:49
msgid "Auto load from DB"
msgstr ""

#: appGUI/ObjectUI.py:736 appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:51
msgid ""
"Automatic replacement of the tools from related application tools\n"
"with tools from DB that have a close diameter value."
msgstr ""

#: appGUI/ObjectUI.py:757
msgid "Generate GCode from the drill holes in an Excellon object."
msgstr ""

#: appGUI/ObjectUI.py:765
msgid "Generate a Geometry for milling drills or slots in an Excellon object."
msgstr ""

#: appGUI/ObjectUI.py:793
msgid "Milling Geometry"
msgstr ""

#: appGUI/ObjectUI.py:795
msgid ""
"Create Geometry for milling holes.\n"
"Select from the Tools Table above the hole dias to be\n"
"milled. Use the # column to make the selection."
msgstr ""

#: appGUI/ObjectUI.py:807 appGUI/preferences/tools/ToolsMillPrefGroupUI.py:598
#: appPlugins/ToolMilling.py:4303
msgid "Milling Diameter"
msgstr ""

#: appGUI/ObjectUI.py:809
msgid "Diameter of the cutting tool."
msgstr ""

#: appGUI/ObjectUI.py:819
msgid "Mill Drills"
msgstr ""

#: appGUI/ObjectUI.py:821
msgid ""
"Create the Geometry Object\n"
"for milling drills."
msgstr ""

#: appGUI/ObjectUI.py:833
msgid "Mill Slots"
msgstr ""

#: appGUI/ObjectUI.py:835
msgid ""
"Create the Geometry Object\n"
"for milling slots."
msgstr ""

#: appGUI/ObjectUI.py:871
msgid "Geometry Object"
msgstr ""

#: appGUI/ObjectUI.py:960
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""

#: appGUI/ObjectUI.py:977 appGUI/ObjectUI.py:1375
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:37 appPlugins/ToolMilling.py:4009
msgid "Plot Object"
msgstr ""

#: appGUI/ObjectUI.py:990 appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:1398
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:156
#: appPlugins/ToolCopperThieving.py:1449 appPlugins/ToolMilling.py:4146
msgid "Dia"
msgstr ""

#: appGUI/ObjectUI.py:997
msgid ""
"Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""

#: appGUI/ObjectUI.py:1006
msgid "Offset Type. The kind of cut offset to be used."
msgstr ""

#: appGUI/ObjectUI.py:1010
msgid ""
"Job Type. Usually the UI form values \n"
"are choose based on the operation type and this will serve as a reminder."
msgstr ""

#: appGUI/ObjectUI.py:1022
msgid ""
"Plot column. It is visible only for MultiGeo Geometry objects.\n"
"Enable plot for the selected tool geometry."
msgstr ""

#: appGUI/ObjectUI.py:1041
msgid "Generate a CNCJob by milling a Geometry."
msgstr ""

#: appGUI/ObjectUI.py:1049 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:30
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon."
msgstr ""

#: appGUI/ObjectUI.py:1108 appObjects/AppObjectTemplate.py:745
msgid "Points"
msgstr ""

#: appGUI/ObjectUI.py:1110
msgid "Total of vertex points in the geometry."
msgstr ""

#: appGUI/ObjectUI.py:1118 appPlugins/ToolCalculators.py:647
#: appPlugins/ToolCalculators.py:1031
msgid "Calculate"
msgstr ""

#: appGUI/ObjectUI.py:1121
msgid "Calculate the number of vertex points in the geometry."
msgstr ""

#: appGUI/ObjectUI.py:1187
msgid "CNC Job Object"
msgstr ""

#: appGUI/ObjectUI.py:1212 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:52
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""

#: appGUI/ObjectUI.py:1221 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:60
msgid "Travel"
msgstr ""

#: appGUI/ObjectUI.py:1288 appObjects/AppObjectTemplate.py:929 appPlugins/ToolReport.py:581
msgid "Travelled distance"
msgstr ""

#: appGUI/ObjectUI.py:1290
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""

#: appGUI/ObjectUI.py:1301
msgid "Estimated time"
msgstr ""

#: appGUI/ObjectUI.py:1303
msgid ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."
msgstr ""

#: appGUI/ObjectUI.py:1323
msgid "Use CNC Code Snippets"
msgstr ""

#: appGUI/ObjectUI.py:1325
msgid ""
"When selected, it will include CNC Code snippets (append and prepend)\n"
"defined in the Preferences."
msgstr ""

#: appGUI/ObjectUI.py:1331 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:68
msgid "Display Annotation"
msgstr ""

#: appGUI/ObjectUI.py:1333 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:70
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""

#: appGUI/ObjectUI.py:1357
msgid "CNC Tools Table"
msgstr ""

#: appGUI/ObjectUI.py:1360
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""

#: appGUI/ObjectUI.py:1409
msgid "Update Plot"
msgstr ""

#: appGUI/ObjectUI.py:1411
msgid "Update the plot."
msgstr ""

#: appGUI/ObjectUI.py:1425 appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:27
#: appPlugins/ToolLevelling.py:1737
msgid "Generate CNC Code with auto-levelled paths."
msgstr ""

#: appGUI/ObjectUI.py:1446
msgid "Opens dialog to save CNC Code file."
msgstr ""

#: appGUI/ObjectUI.py:1453 appPlugins/ToolSolderPaste.py:1722
msgid "Review CNC Code."
msgstr ""

#: appGUI/ObjectUI.py:1487
msgid "Script Object"
msgstr ""

#: appGUI/ObjectUI.py:1507 appGUI/ObjectUI.py:1577
msgid "Auto Completer"
msgstr ""

#: appGUI/ObjectUI.py:1509
msgid "This selects if the auto completer is enabled in the Script Editor."
msgstr ""

#: appGUI/ObjectUI.py:1550
msgid "Document Object"
msgstr ""

#: appGUI/ObjectUI.py:1579
msgid "This selects if the auto completer is enabled in the Document Editor."
msgstr ""

#: appGUI/ObjectUI.py:1649
msgid "Font Color"
msgstr ""

#: appGUI/ObjectUI.py:1651
msgid "Set the font color for the selected text"
msgstr ""

#: appGUI/ObjectUI.py:1660
msgid "Selection Color"
msgstr ""

#: appGUI/ObjectUI.py:1662
msgid "Set the selection color when doing text selection."
msgstr ""

#: appGUI/ObjectUI.py:1670 appGUI/ObjectUI.py:1683
msgid "Alignment"
msgstr ""

#: appGUI/ObjectUI.py:1688
msgid "Align Left"
msgstr ""

#: appGUI/ObjectUI.py:1698
msgid "Align Right"
msgstr ""

#: appGUI/ObjectUI.py:1703
msgid "Justify"
msgstr ""

#: appGUI/ObjectUI.py:1713
msgid "Tab Size"
msgstr ""

#: appGUI/ObjectUI.py:1715
msgid "Set the tab size. In pixels."
msgstr ""

#: appGUI/PlotCanvas.py:254 appGUI/PlotCanvasLegacy.py:409
msgid "Axis enabled."
msgstr ""

#: appGUI/PlotCanvas.py:262 appGUI/PlotCanvasLegacy.py:418
msgid "Axis disabled."
msgstr ""

#: appGUI/PlotCanvas.py:300 appGUI/PlotCanvasLegacy.py:439
msgid "HUD enabled."
msgstr ""

#: appGUI/PlotCanvas.py:309 appGUI/PlotCanvasLegacy.py:446
msgid "HUD disabled."
msgstr ""

#: appGUI/PlotCanvas.py:410 appGUI/PlotCanvasLegacy.py:548
msgid "Grid enabled."
msgstr ""

#: appGUI/PlotCanvas.py:417 appGUI/PlotCanvasLegacy.py:558
msgid "Grid disabled."
msgstr ""

#: appGUI/PlotCanvasLegacy.py:1661
msgid ""
"Could not annotate due of a difference between the number of text elements and the number "
"of text positions."
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1118
msgid "Preferences applied."
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1144
msgid "Application will restart"
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1145
msgid "Are you sure you want to continue?"
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1241
msgid "Preferences default values are restored."
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1273 appMain.py:3145 appMain.py:10996
msgid "Failed to write defaults to file."
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1277
#: appGUI/preferences/PreferencesUIManager.py:1401
msgid "Preferences saved."
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1330
msgid "Preferences edited but not saved."
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1384
msgid ""
"One or more values are changed.\n"
"Do you want to save?"
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1426
msgid "Preferences closed without saving."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:21
#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:20
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:20
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:21
msgid "Adv. Options"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:28
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:30
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:40
msgid "Annotation Size"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:42
msgid "The font size of the annotation text. In pixels."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:51
msgid "Annotation Color"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:53
msgid "Set the font color for the annotation texts."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:30
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:29
msgid "A list of Editor parameters."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:43
msgid "Prepend to G-Code"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:45
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:52
msgid ""
"Type here any G-Code commands you would like to add at the beginning of the G-Code file."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:59
msgid "Append to G-Code"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:61
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:69
msgid ""
"Type here any G-Code commands you would like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:44
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:61
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:53
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:64
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:43
msgid "Circle Steps"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:46
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:63
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:55
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:66
msgid ""
"The number of circle steps for \n"
"linear approximation of circles."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:57
msgid "Travel dia"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:59
msgid ""
"The width of the travel lines to be\n"
"rendered in the plot."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:74
msgid "G-code Decimals"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:85
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:96
#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:155 appObjects/AppObjectTemplate.py:896
#: appPlugins/ToolLevelling.py:2192 appPlugins/ToolReport.py:548
#: appPlugins/ToolSolderPaste.py:1477
msgid "Feedrate"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:98
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:109
msgid "Coordinates type"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:111
msgid ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:117
msgid "Absolute"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:118
msgid "Incremental"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:128
msgid "Force Windows style line-ending"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:130
msgid ""
"When checked will force a Windows style line-ending\n"
"(\\r\\n) on non-Windows OS's."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:144
msgid "Travel Line Color"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:154
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:203
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:304
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:170
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:211
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:151
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:234
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:242 appPlugins/ToolRulesCheck.py:1364
#: appPlugins/ToolRulesCheck.py:1379
msgid "Outline"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:156
msgid "Set the travel line color for plotted objects."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:164
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:213
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:314
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:179
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:221
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:254
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:128
#: appPlugins/ToolCopperThieving.py:1415
msgid "Fill"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:166
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:215
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:316
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:256
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:176
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:326
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:192
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:234
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:266
msgid "Alpha"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:178
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:328
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:268
msgid "Set the fill transparency for plotted objects."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:193
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:294
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:141
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:223
msgid "Object Color"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:205
msgid "Set the color for plotted objects."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:28
msgid "Export G-Code"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:50
msgid "Plot kind"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:20
msgid "Pre-Processors"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:25
msgid "Compensation"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:27
msgid "Compensate CNC bed issues."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:38
#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:50
msgid "Bed Size"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:40
#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:52
msgid "CNC bed size on direction"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:62
#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:74
msgid "Bed Offset"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:64
#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:76
msgid "CNC bed offset on direction"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:86
#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:98
msgid "Bed Skew"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:88
#: appGUI/preferences/cncjob/CNCJobPPGroupUI.py:100
msgid "CNC bed skew on direction"
msgstr ""

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:27
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:27
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:275
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:292
msgid "Advanced Options"
msgstr ""

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:29
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:29
msgid ""
"A list of advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:42
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:44
msgid "Table Show/Hide"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:27
msgid "A list of Excellon Editor parameters."
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:38
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:40
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:42
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:169
msgid "Selection limit"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:40
msgid ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:53
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:115
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:116
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:118
msgid "New Dia"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:66
msgid "Nr of drills"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:68
msgid "Specify how many drills to be in the array."
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:81
msgid "Linear Drill Array"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:91
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:261
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:132
msgid "Linear Direction"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:136
msgid "Circular Drill Array"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:146
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:318
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:186
msgid "Circular Direction"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:159
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:331
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:199
msgid "Circular Angle"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:238
msgid "Linear Slot Array"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:248
msgid "Nr of slots"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:308
msgid "Circular Slot Array"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:26
#: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:26
msgid "Export Options"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:28
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:40
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:187
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:31
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:35
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:96 appPlugins/ToolPcbWizard.py:480
#: appPlugins/ToolReport.py:169
msgid "Units"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:42
#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:48
msgid "The units used in the Excellon file."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:45
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:197
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:40
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:101 appPlugins/ToolPcbWizard.py:478
#: appPlugins/ToolReport.py:355 appPlugins/ToolReport.py:359 appPlugins/ToolReport.py:361
msgid "Inch"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:55
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:50
msgid "Int/Decimals"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:57
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:69
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:119
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:148
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:82
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:132
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:161
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:92
#: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:40
msgid "Format"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:94
#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:104
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:101
msgid "Decimal"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:102
msgid "No-Decimal"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:116
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:169
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:91
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:111
msgid "Zeros"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:119
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:126
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:182
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:101
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:121 appPlugins/ToolPcbWizard.py:463
msgid "LZ"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:127
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:183
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:102
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:122 appPlugins/ToolPcbWizard.py:464
msgid "TZ"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:129
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:140
msgid "Slot type"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:143
#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:153
msgid ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:150
msgid "Routed"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:151
msgid "Drilled(G85)"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:54
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:46
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:57
msgid "M-Color"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:80 appPlugins/ToolPcbWizard.py:436
msgid "Excellon Format"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:82
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:111
msgid "INCH"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:112
msgid "Default values for INCH are 2:4"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:140
msgid "METRIC"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:141
msgid "Default values for METRIC are 3:3"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:172
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed.\n"
"\n"
"This is used when there is no information\n"
"stored in the Excellon file."
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:190
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:200
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:208
msgid "Update Export settings"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:223
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:107 appPlugins/ToolPanelize.py:1350
msgid "Path Optimization"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:232
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:81
msgid "Algorithm:"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:234
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:83
msgid ""
"This sets the path optimization algorithm.\n"
"- Rtre -> Rtree algorithm\n"
"- MetaHeuristic -> Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"- Basic -> Using Google OR-Tools Basic algorithm\n"
"- TSA -> Using Travelling Salesman algorithm\n"
"\n"
"Some options are disabled when the application works in 32bit mode."
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:246
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:95
msgid "Rtree"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:247
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:341
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:345
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:352
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:96
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:166
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:170
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:177
msgid "MetaHeuristic"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:248
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:341
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:345
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:352
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:97
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:166
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:170
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:177
msgid "Basic"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:249
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:98
msgid "TSA"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:255
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:104
msgid "Duration"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:258
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:106
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:275
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:122
msgid "Join Option"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:284
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:131
msgid "Fuse Tools"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:286
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:133
msgid ""
"When checked, the tools will be merged\n"
"but only if they share some of their attributes."
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:306
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:153
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:244
msgid "Set the line color for plotted objects."
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:29
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:41
msgid "Mill Holes"
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:43
msgid "Create Geometry for milling holes."
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:47
msgid "Drill Tool dia"
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:49
msgid ""
"Diameter of the cutting tool\n"
"when milling drill holes."
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:59
msgid "Slot Tool dia"
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:61
msgid ""
"Diameter of the cutting tool\n"
"when milling slot holes."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:21
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:71
msgid "App Settings"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:40
msgid "Grid Settings"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:51 appMain.py:8667
msgid "X value"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:53
msgid "This is the Grid snap value on X axis."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:63 appMain.py:8670
msgid "Y value"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:65
msgid "This is the Grid snap value on Y axis."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:75
msgid "Snap Max"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:93
msgid "Workspace Settings"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:102
msgid "Active"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:112
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:178
msgid "Orientation"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:179
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:291 appPlugins/ToolFilm.py:1678
msgid ""
"Can be:\n"
"- Portrait\n"
"- Landscape"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:183
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:165
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:295 appMain.py:8687
#: appPlugins/ToolFilm.py:1682
msgid "Portrait"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:184
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:166
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:296 appMain.py:8689
#: appPlugins/ToolFilm.py:1683
msgid "Landscape"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:194
msgid "Font Size"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:204
msgid "Notebook"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:206
msgid ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:225
#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:286 appMain.py:8675
#: appPlugins/ToolDblSided.py:855 appPlugins/ToolFilm.py:1493
msgid "Axis"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:227
msgid "This sets the font size for canvas axis."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:244
msgid "Textbox"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:246
msgid ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in the application."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:264 appMain.py:8692
msgid "HUD"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:266
msgid "This sets the font size for the Heads Up Display."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:296
msgid "Axis Color"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:298
msgid "Set the color of the screen axis."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:308
msgid "Mouse Settings"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:318
msgid "Cursor Shape"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:320
msgid ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:326
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:204
msgid "Small"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:327
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:205
msgid "Big"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:334
msgid "Cursor Size"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:336
msgid "Set the size of the mouse cursor, in pixels."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:347
msgid "Cursor Width"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:349
msgid "Set the line width of the mouse cursor, in pixels."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:360
#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:367
msgid "Cursor Color"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:362
msgid "Check this box to color mouse cursor."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:369
msgid "Set the color of the mouse cursor."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:385
msgid "Pan Button"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:387
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:391
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:237
msgid "MMB"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:392
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:238
msgid "RMB"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:398
msgid "Multi-Selection"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:400
msgid "Select the key used for multiple selection."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:402
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:244
msgid "CTRL"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:403
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:245
msgid "SHIFT"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:421
msgid "Delete object confirmation"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:423
msgid ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:429
msgid "Allow Edit"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:431
msgid ""
"When checked, the user can edit the object names in the Project Tab\n"
"by clicking on the object name. Active after restart."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:437
msgid "\"Open\" behavior"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:439
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:448
msgid "Enable ToolTips"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:450
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:459
msgid "Bookmarks limit"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:461
msgid ""
"The maximum number of bookmarks that may be installed in the menu.\n"
"The number of bookmarks in the bookmark manager may be greater\n"
"but the menu will hold only so much."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:470
msgid "Activity Icon"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:472
msgid "Select the GIF that show activity when FlatCAM is active."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:24
msgid "App Preferences"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:32
msgid ""
"The default value for the application units.\n"
"Whatever is selected here is set every time\n"
"the application is started."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:45 appPlugins/ToolCalculators.py:537
msgid "inch"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:52
msgid "Precision MM"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:54
msgid ""
"The number of decimals used throughout the application\n"
"when the set units are in METRIC system.\n"
"Any change here require an application restart."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:66
msgid "Precision Inch"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:68
msgid ""
"The number of decimals used throughout the application\n"
"when the set units are in INCH system.\n"
"Any change here require an application restart."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:92
msgid "Graphic Engine"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:93
msgid ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:100
msgid "3D"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:111
msgid "Workers number"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:113
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:127
msgid "Geo Tolerance"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:129
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.005.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:144
msgid "Portable app"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:145
msgid ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:153
msgid "Verbose log"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:154
msgid ""
"Set the log level.\n"
"Values:\n"
"0 -> logging is disabled\n"
"1 -> logging is done only in console\n"
"2 -> verbose logging with messages in the Tcl Shell\n"
"Require restart."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:169
msgid "Application Level"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:170
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:192
msgid "Languages"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:193
msgid "Set the language used throughout FlatCAM."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:206 appTranslation.py:114
msgid "Apply Language"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:207
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:216
msgid "Startup Settings"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:229
msgid "Splash Screen"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:231
msgid "Enable display of the splash screen at application startup."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:243
msgid "Sys Tray Icon"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:245
msgid "Enable display of FlatCAM icon in Sys Tray."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:250
msgid "Show Shell"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:252
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:259
msgid "Show Project"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:261
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:267
msgid "Version Check"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:269
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:276
msgid "Send Statistics"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:278
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:287
msgid "Save Settings"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:300
msgid "Save Compressed Project"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:302
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:311
msgid "Compression"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:313
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:324
msgid "Enable Auto Save"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:326
msgid ""
"Check to enable the autosave feature.\n"
"When enabled, the application will try to save a project\n"
"at the set interval."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:336
msgid "Interval"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:338
msgid ""
"Time interval for autosaving. In milliseconds.\n"
"The application will try to save periodically but only\n"
"if the project was saved manually at least once.\n"
"While active, some operations may block this feature."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:349
msgid "Text to PDF parameters"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:351
msgid "Used when saving text in Code Editor or in FlatCAM Document objects."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:369
msgid "Top Margin"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:371
msgid "Distance between text body and the top of the PDF file."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:382
msgid "Bottom Margin"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:384
msgid "Distance between text body and the bottom of the PDF file."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:395
msgid "Left Margin"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:397
msgid "Distance between text body and the left of the PDF file."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:408
msgid "Right Margin"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:410
msgid "Distance between text body and the right of the PDF file."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:21
msgid "GUI Preferences"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:38
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:286
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:318
msgid "Theme"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:40
msgid ""
"Select a theme for the application.\n"
"It will theme the plot area."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:46
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:132
#: appPlugins/ToolFiducials.py:1154 appPlugins/ToolMarkers.py:1457
msgid "Auto"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:47
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:286
msgid "Light"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:48
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:318
msgid "Dark"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:51
msgid ""
"The theme can be:\n"
"Default: Default theme\n"
"Auto: Matches mode from OS\n"
"Light: Light mode\n"
"Dark: Dark mode"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:59
msgid "Dark Canvas"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:61
msgid ""
"Check this box to force the use of dark canvas\n"
"even if a dark theme is not selected."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:83
msgid "Layout"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:85
msgid ""
"Select a layout for the application.\n"
"It is applied immediately."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:105
msgid "Style"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:107
msgid ""
"Select a style for the application.\n"
"It will be applied at the next app start."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:122
msgid "Hover Shape"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:124
msgid ""
"Enable display of a hover shape for the application objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:131
msgid "Selection Shape"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:133
msgid ""
"Enable the display of a selection shape for the application objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:141
msgid "GUI Layout"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:143
msgid ""
"Select a GUI layout for the Preferences.\n"
"Can be:\n"
"'Normal' -> a normal and compact layout.\n"
"'Columnar' -> a layout the auto-adjust such\n"
"that columns are preferentially showed in columns"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:150
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:364
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:338
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:302
msgid "Normal"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:150
msgid "Columnar"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:157 appPlugins/ToolImage.py:802
#: appPlugins/ToolImage.py:813
msgid "Colors"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:167
msgid "Left-Right Selection Color"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:172
msgid "Set the line color for the 'left to right' selection box."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:181
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:194
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:207
msgid "Right-Left Selection Color"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:213
msgid "Set the line color for the 'right to left' selection box."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:223
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:236
msgid "Set the fill transparency for selection 'right to left' box."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:252
msgid "Editor Color"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:256
msgid "Drawing"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:258
msgid "Set the color for the shape."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:268
msgid "Set the color of the shape when selected."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:280
msgid "Project Items Color"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:290
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:322
msgid "Enabled"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:292
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:324
msgid "Set the color of the items in Project Tab Tree."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:292
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:304
msgid "Light Theme."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:299
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:331
msgid "Disabled"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:302
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:334
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:324
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:336
msgid "Dark Theme."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:347
msgid "Project AutoHide"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:349
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:42
#: appPlugins/ToolMilling.py:4908
msgid "Segment X size"
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:44
#: appPlugins/ToolMilling.py:4910
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:58
#: appPlugins/ToolMilling.py:4925
msgid "Segment Y size"
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:60
#: appPlugins/ToolMilling.py:4927
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""

#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:42
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:171
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""

#: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:28
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export DXF menu entry."
msgstr ""

#: appGUI/preferences/geometry/GeometryExpPrefGroupUI.py:42
msgid "Autodesk DXF Format used when exporting Geometry as DXF."
msgstr ""

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:40
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:70
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:86 appPlugins/ToolCutOut.py:2394
#: appPlugins/ToolIsolation.py:3649 appPlugins/ToolMilling.py:1959
#: appPlugins/ToolMilling.py:4552
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:35
msgid "\"Follow\""
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:58
msgid ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:63
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:72
#: appObjects/AppObjectTemplate.py:818 appObjects/AppObjectTemplate.py:821
#: appObjects/AppObjectTemplate.py:824 appObjects/AppObjectTemplate.py:854
#: appObjects/AppObjectTemplate.py:861 appObjects/AppObjectTemplate.py:864
#: appPlugins/ToolCopperThieving.py:1725 appPlugins/ToolFiducials.py:1089
#: appPlugins/ToolReport.py:470 appPlugins/ToolReport.py:473 appPlugins/ToolReport.py:476
#: appPlugins/ToolReport.py:506 appPlugins/ToolReport.py:513 appPlugins/ToolReport.py:516
msgid "None"
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:69
msgid "Delayed Buffering"
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:71
msgid "When checked it will do the buffering in background."
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:78
msgid ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:86
msgid "Tolerance for polygon simplification."
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:31
msgid "A list of Gerber Editor parameters."
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:44
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:57
msgid "New Aperture code"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:70
msgid "New Aperture size"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:72
msgid "Size for the new aperture"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:83
msgid "New Aperture type"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:85
msgid ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:107
msgid "Aperture Dimensions"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:109
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:44
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:43
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:45
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:47
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:44
msgid ""
"Diameters of the tools, separated by comma.\n"
"The value of the diameter has to use the dot decimals separator.\n"
"Valid values: 0.3, 1.0"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:121
msgid "Linear Pad Array"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:175
msgid "Circular Pad Array"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:228
msgid "Distance at which to buffer the Gerber element."
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:240
msgid "Scale Tool"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:253
msgid "Factor to scale the Gerber element."
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:276
msgid "Threshold low"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:278
msgid "Threshold value under which the apertures are not marked."
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:288
msgid "Threshold high"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:290
msgid "Threshold value over which the apertures are not marked."
msgstr ""

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:37
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:43
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:98
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:104
msgid "The units used in the Gerber file."
msgstr ""

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:52
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:65
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:81
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:94
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:104
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:114
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:124
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:80
msgid "Default Values"
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:82
msgid ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:148
msgid "Clean Apertures"
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:150
msgid ""
"Will remove apertures that do not have geometry\n"
"thus lowering the number of apertures in the Gerber object."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:156
msgid "Polarity change buffer"
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:158
msgid ""
"Will apply extra buffering for the\n"
"solid geometry when we have polarity changes.\n"
"May help loading Gerber files that otherwise\n"
"do not load correctly."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:166
msgid "Plot on Select"
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:168
msgid "When active, selecting an object in the Project tab will replot it above the others."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:176
msgid "Layers"
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:187
msgid "Store colors"
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:189
msgid ""
"It will store the set colors for Gerber objects.\n"
"Those will be used each time the application is started."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:196
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:354
msgid "Color manager"
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:199
msgid "Manage colors associated with Gerber objects."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:208
msgid "Reset the colors associated with Gerber objects."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:236
msgid ""
"If checked, the polygon outline will be plotted on canvas.\n"
"Plotting the outline require more processing power but looks nicer."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:329
msgid "Stored colors for Gerber objects are deleted."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:376
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:380
msgid "Color"
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:391
msgid "Add a new layer."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:399
msgid "Delete the last layers."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:446
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:507 appMain.py:9209 appMain.py:9258
#: appMain.py:9267 appObjects/AppObject.py:323
msgid "Layer"
msgstr ""

#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:62
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:93
msgid "Rounded Geo"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:21
msgid "Copper Thieving Plugin"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:30
msgid ""
"A tool to generate a Copper Thieving that can be added\n"
"to a selected Gerber file."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:45
msgid "Number of steps (lines) used to interpolate circles."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:55
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:326
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:268
#: appPlugins/ToolCopperThieving.py:1303 appPlugins/ToolCopperThieving.py:1678
#: appPlugins/ToolExtract.py:1340
msgid "Clearance"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:57
msgid ""
"This set the distance between the copper Thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:85
#: appPlugins/ToolCopperThieving.py:1334
msgid "Thieving areas with area less then this value will not be added."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:97
#: appPlugins/ToolCopperThieving.py:1355
msgid "Reference:"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:99
#: appPlugins/ToolCopperThieving.py:1357
msgid ""
"- 'Itself' - the copper thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by another "
"object."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:308 appPlugins/ToolCopperThieving.py:1362
#: appPlugins/ToolNCC.py:4525
msgid "Itself"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:323
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:308
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279
#: appPlugins/ToolCopperThieving.py:1362 appPlugins/ToolFollow.py:728
#: appPlugins/ToolIsolation.py:3887 appPlugins/ToolNCC.py:4525 appPlugins/ToolPaint.py:3288
msgid "Area Selection"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:323
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:308
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279
#: appPlugins/ToolCopperThieving.py:1362 appPlugins/ToolIsolation.py:3887
#: appPlugins/ToolNCC.py:4525 appPlugins/ToolPaint.py:3288
msgid "Reference Object"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:111
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:67
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:201
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:67
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:198
#: appPlugins/ToolCopperThieving.py:1400 appPlugins/ToolCutOut.py:407
#: appPlugins/ToolExtract.py:1081 appPlugins/ToolExtract.py:1231
#: appPlugins/ToolPunchGerber.py:2093 appPlugins/ToolPunchGerber.py:2264
msgid "Rectangular"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:112
#: appPlugins/ToolCopperThieving.py:1401
msgid "Minimal"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:114
#: appPlugins/ToolCopperThieving.py:1394 appPlugins/ToolFilm.py:1302
#: appPlugins/ToolPanelize.py:1234
msgid "Box Type"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:116
#: appPlugins/ToolCopperThieving.py:1396
msgid ""
"- 'Rectangular' - the bounding box will be of rectangular shape.\n"
"- 'Minimal' - the bounding box will be the convex hull shape."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:130
#: appPlugins/ToolCopperThieving.py:1417
msgid ""
"- 'Solid' - copper thieving will be a solid polygon.\n"
"- 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
"- 'Squares Grid' - the empty area will be filled with a pattern of squares.\n"
"- 'Lines Grid' - the empty area will be filled with a pattern of lines."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137
#: appPlugins/ToolCopperThieving.py:1424
msgid "Dots Grid"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137
#: appPlugins/ToolCopperThieving.py:1424
msgid "Squares Grid"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137
#: appPlugins/ToolCopperThieving.py:1424
msgid "Lines Grid"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:145
#: appPlugins/ToolCopperThieving.py:1445
msgid "Dots Grid Parameters"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:158
#: appPlugins/ToolCopperThieving.py:1451
msgid "Dot diameter in Dots Grid."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:171
#: appPlugins/ToolCopperThieving.py:1464
msgid "Distance between each two dots in Dots Grid."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:184
#: appPlugins/ToolCopperThieving.py:1491
msgid "Squares Grid Parameters"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:197
#: appPlugins/ToolCopperThieving.py:1497
msgid "Square side size in Squares Grid."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:210
#: appPlugins/ToolCopperThieving.py:1510
msgid "Distance between each two squares in Squares Grid."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:223
#: appPlugins/ToolCopperThieving.py:1537
msgid "Lines Grid Parameters"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:236
#: appPlugins/ToolCopperThieving.py:1543
msgid "Line thickness size in Lines Grid."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:249
#: appPlugins/ToolCopperThieving.py:1556
msgid "Distance between each two lines in Lines Grid."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:262
#: appPlugins/ToolCopperThieving.py:1580
msgid "Robber Bar Parameters"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:264
#: appPlugins/ToolCopperThieving.py:1582
msgid ""
"Parameters used for the robber bar.\n"
"Robber bar = copper border to help in pattern hole plating."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:279
#: appPlugins/ToolCopperThieving.py:1602
msgid "Bounding box margin for robber bar."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:290
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:311
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:54
#: appPlugins/ToolCopperThieving.py:1613 appPlugins/ToolExtract.py:1395
#: appPlugins/ToolMarkers.py:1308
msgid "Thickness"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:292
#: appPlugins/ToolCopperThieving.py:1615
msgid "The robber bar thickness."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:305
#: appPlugins/ToolCopperThieving.py:1641
msgid "Pattern Plating Mask"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:307
#: appPlugins/ToolCopperThieving.py:1643
msgid "Generate a mask for pattern plating."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:319
#: appPlugins/ToolCopperThieving.py:1671
msgid "Only Pads"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:321
#: appPlugins/ToolCopperThieving.py:1673
msgid "Select only pads in case the selected object is a copper Gerber."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:328
#: appPlugins/ToolCopperThieving.py:1680
msgid ""
"The distance between the possible copper thieving elements\n"
"and/or robber bar and the actual openings in the mask."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:342
#: appPlugins/ToolCopperThieving.py:1716
msgid "Choose which additional geometry to include, if available."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:168
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:589
#: appPlugins/ToolCopperThieving.py:1725 appPlugins/ToolFilm.py:1491
#: appPlugins/ToolMilling.py:4294
msgid "Both"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345
#: appPlugins/ToolCopperThieving.py:532 appPlugins/ToolCopperThieving.py:536
#: appPlugins/ToolCopperThieving.py:598 appPlugins/ToolCopperThieving.py:1292
#: appPlugins/ToolCopperThieving.py:1725
msgid "Thieving"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:345
#: appPlugins/ToolCopperThieving.py:1725
msgid "Robber bar"
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:20
msgid "Extract Drills Options"
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:27
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:27
#: appPlugins/ToolExtract.py:1024 appPlugins/ToolPunchGerber.py:2040
msgid "Processed Pads Type"
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:29
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:29
#: appPlugins/ToolExtract.py:1026 appPlugins/ToolPunchGerber.py:2042
msgid ""
"The type of pads shape to be processed.\n"
"If the PCB has many SMD pads with rectangular pads,\n"
"disable the Rectangular aperture."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:45
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:45
#: appPlugins/ToolExtract.py:1059 appPlugins/ToolPunchGerber.py:2071
msgid "Process Circular Pads."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:51
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:175
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:51
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:172
#: appPlugins/ToolExtract.py:1065 appPlugins/ToolExtract.py:1205
#: appPlugins/ToolPunchGerber.py:2077 appPlugins/ToolPunchGerber.py:2238
msgid "Oblong"
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:53
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:53
#: appPlugins/ToolExtract.py:1067 appPlugins/ToolPunchGerber.py:2079
msgid "Process Oblong Pads."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:61
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:61
#: appPlugins/ToolExtract.py:1075 appPlugins/ToolPunchGerber.py:2087
msgid "Process Square Pads."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:69
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:69
#: appPlugins/ToolExtract.py:1083 appPlugins/ToolPunchGerber.py:2095
msgid "Process Rectangular Pads."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:75
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:214
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:75
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:211
#: appObjects/AppObjectTemplate.py:562 appPlugins/ToolExtract.py:1089
#: appPlugins/ToolExtract.py:1244 appPlugins/ToolPunchGerber.py:2101
#: appPlugins/ToolPunchGerber.py:2277 appPlugins/ToolReport.py:187
msgid "Others"
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:77
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:77
#: appPlugins/ToolExtract.py:1091 appPlugins/ToolPunchGerber.py:2103
msgid "Process pads not in the categories above."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:98
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:122
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:99
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:119
#: appPlugins/ToolExtract.py:1152 appPlugins/ToolExtract.py:1268
#: appPlugins/ToolPunchGerber.py:2156 appPlugins/ToolPunchGerber.py:2184
msgid "Fixed Diameter"
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:99
#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:147
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:100
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:144
#: appPlugins/ToolExtract.py:1154 appPlugins/ToolExtract.py:1183
#: appPlugins/ToolPunchGerber.py:2158 appPlugins/ToolPunchGerber.py:2212
msgid "Fixed Annular Ring"
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:100
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:101
#: appPlugins/ToolExtract.py:1153 appPlugins/ToolPunchGerber.py:2157
msgid "Proportional"
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:106 appPlugins/ToolExtract.py:1143
msgid ""
"The method for processing pads. Can be:\n"
"- Fixed Diameter -> all holes will have a set size\n"
"- Fixed Annular Ring -> all holes will have a set annular ring\n"
"- Proportional -> each hole size will be a fraction of the pad size"
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:138
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:135
#: appPlugins/ToolExtract.py:1278 appPlugins/ToolPunchGerber.py:2194
msgid "Fixed hole diameter."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:149
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:146
#: appPlugins/ToolExtract.py:1185 appPlugins/ToolPunchGerber.py:2214
msgid ""
"The size of annular ring.\n"
"The copper sliver between the hole exterior\n"
"and the margin of the copper pad."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:164
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:161
#: appPlugins/ToolExtract.py:1194 appPlugins/ToolPunchGerber.py:2227
msgid "The size of annular ring for circular pads."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:177
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:174
#: appPlugins/ToolExtract.py:1207 appPlugins/ToolPunchGerber.py:2240
msgid "The size of annular ring for oblong pads."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:190
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:187
#: appPlugins/ToolExtract.py:1220 appPlugins/ToolPunchGerber.py:2253
msgid "The size of annular ring for square pads."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:203
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:200
#: appPlugins/ToolExtract.py:1233 appPlugins/ToolPunchGerber.py:2266
msgid "The size of annular ring for rectangular pads."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:216
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:213
#: appPlugins/ToolExtract.py:1246 appPlugins/ToolPunchGerber.py:2279
msgid "The size of annular ring for other pads."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:229
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:226
#: appPlugins/ToolExtract.py:1296 appPlugins/ToolPunchGerber.py:2291
msgid "Proportional Diameter"
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:244
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:241
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:63
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:123 appPlugins/ToolFilm.py:1356
#: appPlugins/ToolFilm.py:1427
msgid "Factor"
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:246
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:243
#: appPlugins/ToolExtract.py:1307 appPlugins/ToolPunchGerber.py:2302
msgid ""
"Proportional Diameter.\n"
"The hole diameter will be a fraction of the pad size."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:256 appPlugins/ToolExtract.py:1328
#: appPlugins/ToolExtract.py:1356
msgid "Extract Soldermask"
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:258 appPlugins/ToolExtract.py:1330
#: appPlugins/ToolExtract.py:1359
msgid "Extract soldermask from a given Gerber file."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:270 appPlugins/ToolExtract.py:1342
msgid ""
"This set how much the soldermask extends\n"
"beyond the margin of the pads."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:284 appPlugins/ToolExtract.py:1368
#: appPlugins/ToolExtract.py:1413
msgid "Extract Cutout"
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:286 appPlugins/ToolExtract.py:1370
#: appPlugins/ToolExtract.py:1416
msgid "Extract a cutout from a given Gerber file."
msgstr ""

#: appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:313 appPlugins/ToolExtract.py:1397
msgid "The thickness of the line that makes the cutout geometry."
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:20
msgid "Fiducials Plugin"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:29
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:29
#: appPlugins/ToolCopperThieving.py:1293 appPlugins/ToolEtchCompensation.py:386
#: appPlugins/ToolFiducials.py:1046 appPlugins/ToolMarkers.py:1284
#: appPlugins/ToolObjectDistance.py:449 appPlugins/ToolOptimal.py:505
#: appPlugins/ToolSolderPaste.py:1349
msgid "Parameters used for this tool."
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:42
#: appPlugins/ToolFiducials.py:1059
msgid ""
"This set the fiducial diameter if fiducial type is circular,\n"
"otherwise is the size of the fiducial.\n"
"The soldermask opening is double than that."
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:70
#: appPlugins/ToolFiducials.py:1087
msgid "Up"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:71
#: appPlugins/ToolFiducials.py:1088
msgid "Down"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
#: appPlugins/ToolFiducials.py:1091
msgid "Second fiducial"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:76
#: appPlugins/ToolFiducials.py:1093
msgid ""
"The position for the second fiducial.\n"
"- 'Up' - the order is: bottom-left, top-left, top-right.\n"
"- 'Down' - the order is: bottom-left, bottom-right, top-right.\n"
"- 'None' - there is no second fiducial. The order is: bottom-left, top-right."
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:90
#: appPlugins/ToolFiducials.py:1107
msgid "Fiducial Type"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:92
#: appPlugins/ToolFiducials.py:1109
msgid ""
"The type of fiducial.\n"
"- 'Circular' - this is the regular fiducial.\n"
"- 'Cross' - cross lines fiducial.\n"
"- 'Chess' - chess pattern fiducial."
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:99
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:47 appPlugins/ToolFiducials.py:1116
#: appPlugins/ToolMarkers.py:1301
msgid "Cross"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:99
#: appPlugins/ToolFiducials.py:1116
msgid "Chess"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:105
#: appPlugins/ToolFiducials.py:1122
msgid "Line thickness"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:133
#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:67
#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:48 appPlugins/ToolCutOut.py:2547
#: appPlugins/ToolDblSided.py:1050 appPlugins/ToolFiducials.py:1155
#: appPlugins/ToolLevelling.py:1897 appPlugins/ToolMarkers.py:1457
#: appPlugins/ToolPunchGerber.py:2333
msgid "Manual"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:137
#: appPlugins/ToolFiducials.py:1159
msgid ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding box.\n"
"- 'Manual' - manual placement of fiducials."
msgstr ""

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:20
msgid "Invert Gerber Plugin"
msgstr ""

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:29
msgid ""
"A tool to invert Gerber geometry from positive to negative\n"
"and in revers."
msgstr ""

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:43 appPlugins/ToolInvertGerber.py:251
msgid ""
"Distance by which to avoid\n"
"the edges of the Gerber object."
msgstr ""

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:57 appPlugins/ToolInvertGerber.py:262
msgid "Lines Join Style"
msgstr ""

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:59 appPlugins/ToolInvertGerber.py:264
msgid ""
"The way that the lines in the object outline will be joined.\n"
"Can be:\n"
"- rounded -> an arc is added between two joining lines\n"
"- square -> the lines meet in 90 degrees angle\n"
"- bevel -> the lines are joined by a third line"
msgstr ""

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:78 appPlugins/ToolInvertGerber.py:273
msgid "Bevel"
msgstr ""

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:20
msgid "Optimal Plugin"
msgstr ""

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:29
msgid ""
"A tool to find the minimum distance between\n"
"every two Gerber geometric elements"
msgstr ""

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:45 appPlugins/ToolOptimal.py:515
msgid "Precision"
msgstr ""

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:47
msgid "Number of decimals for the distances and coordinates in this tool."
msgstr ""

#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:20
msgid "Punch Gerber Options"
msgstr ""

#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:107
#: appPlugins/ToolPunchGerber.py:2138
msgid ""
"The punch hole source can be:\n"
"- Excellon Object-> the Excellon object drills center will serve as reference.\n"
"- Fixed Diameter -> will try to use the pads center as reference adding fixed diameter "
"holes.\n"
"- Fixed Annular Ring -> will try to keep a set annular ring.\n"
"- Proportional -> will make a Gerber punch hole having the diameter a percentage of the "
"pad diameter."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:20
msgid "QRCode Plugin"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:29
msgid ""
"A tool to create a QRCode that can be inserted\n"
"into a selected Gerber file, or it can be exported as a file."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:42 appMain.py:8655
#: appPlugins/ToolQRCode.py:808
msgid "Version"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:44 appPlugins/ToolQRCode.py:810
msgid ""
"QRCode version can have values from 1 (21x21 boxes)\n"
"to 40 (177x177 boxes)."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:55 appPlugins/ToolQRCode.py:821
msgid "Error correction"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:57
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:68 appPlugins/ToolQRCode.py:823
#: appPlugins/ToolQRCode.py:834
#, python-format
msgid ""
"Parameter that controls the error correction used for the QR Code.\n"
"L = maximum 7%% errors can be corrected\n"
"M = maximum 15%% errors can be corrected\n"
"Q = maximum 25%% errors can be corrected\n"
"H = maximum 30%% errors can be corrected."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:78 appPlugins/ToolQRCode.py:844
msgid "Box Size"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:80 appPlugins/ToolQRCode.py:846
msgid ""
"Box size control the overall size of the QRcode\n"
"by adjusting the size of each box in the code."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:91 appPlugins/ToolQRCode.py:857
msgid "Border Size"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:93 appPlugins/ToolQRCode.py:859
msgid ""
"Size of the QRCode border. How many boxes thick is the border.\n"
"Default value is 4. The width of the clearance around the QRCode."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:104 appPlugins/ToolQRCode.py:766
msgid "QRCode Data"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:106 appPlugins/ToolQRCode.py:768
msgid "QRCode Data. Alphanumeric text to be encoded in the QRCode."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:110 appPlugins/ToolQRCode.py:782
msgid "Add here the text to be included in the QRCode..."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:116
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:222 appPlugins/ToolFilm.py:1561
#: appPlugins/ToolQRCode.py:870
msgid "Polarity"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:118 appPlugins/ToolQRCode.py:872
msgid ""
"Choose the polarity of the QRCode.\n"
"It can be drawn in a negative way (squares are clear)\n"
"or in a positive way (squares are opaque)."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:122
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:221 appPlugins/ToolFilm.py:1559
#: appPlugins/ToolQRCode.py:876
msgid "Negative"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:123
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:220 appPlugins/ToolFilm.py:1558
#: appPlugins/ToolQRCode.py:877
msgid "Positive"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:125 appPlugins/ToolQRCode.py:879
msgid ""
"Choose the type of QRCode to be created.\n"
"If added on a Silkscreen Gerber file the QRCode may\n"
"be added as positive. If it is added to a Copper Gerber\n"
"file then perhaps the QRCode can be added as negative."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:136
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:142 appPlugins/ToolQRCode.py:890
#: appPlugins/ToolQRCode.py:896
msgid ""
"The bounding box, meaning the empty space that surrounds\n"
"the QRCode geometry, can have a rounded or a square shape."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:149 appPlugins/ToolQRCode.py:924
msgid "Fill Color"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:151 appPlugins/ToolQRCode.py:926
msgid "Set the QRCode fill color (squares color)."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:159 appPlugins/ToolQRCode.py:948
msgid "Back Color"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:161 appPlugins/ToolQRCode.py:950
msgid "Set the QRCode background color."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:20
msgid "Check Rules Plugin"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:22
msgid ""
"A tool to check if Gerber files are within a set\n"
"of Manufacturing Rules."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:31
#: appPlugins/ToolRulesCheck.py:1202 appPlugins/ToolRulesCheck.py:1248
#: appPlugins/ToolRulesCheck.py:1314 appPlugins/ToolRulesCheck.py:1456
msgid "Copper"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:31
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:130
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:208
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:243
#: appPlugins/ToolRulesCheck.py:1202 appPlugins/ToolRulesCheck.py:1209
#: appPlugins/ToolRulesCheck.py:1216 appPlugins/ToolRulesCheck.py:1223
#: appPlugins/ToolRulesCheck.py:1456 appPlugins/ToolRulesCheck.py:1566
#: appPlugins/ToolRulesCheck.py:1653 appPlugins/ToolRulesCheck.py:1691
msgid "Rules"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:41
#: appPlugins/ToolRulesCheck.py:444 appPlugins/ToolRulesCheck.py:1466
msgid "Trace Size"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:43
#: appPlugins/ToolRulesCheck.py:1468
msgid "This checks if the minimum size for traces is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:50
#: appPlugins/ToolRulesCheck.py:1475
msgid "Minimum acceptable trace size."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:62
#: appPlugins/ToolRulesCheck.py:676 appPlugins/ToolRulesCheck.py:706
#: appPlugins/ToolRulesCheck.py:1489
msgid "Copper to Copper clearance"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:64
#: appPlugins/ToolRulesCheck.py:1491
msgid ""
"This checks if the minimum clearance between copper\n"
"features is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:72
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:94
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:150
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:172
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:194
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:229
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:263
#: appPlugins/ToolRulesCheck.py:1499 appPlugins/ToolRulesCheck.py:1524
#: appPlugins/ToolRulesCheck.py:1586 appPlugins/ToolRulesCheck.py:1611
#: appPlugins/ToolRulesCheck.py:1636 appPlugins/ToolRulesCheck.py:1674
#: appPlugins/ToolRulesCheck.py:1711
msgid "Minimum acceptable clearance value."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:84
#: appPlugins/ToolRulesCheck.py:736 appPlugins/ToolRulesCheck.py:742
#: appPlugins/ToolRulesCheck.py:755 appPlugins/ToolRulesCheck.py:762
#: appPlugins/ToolRulesCheck.py:1514
msgid "Copper to Outline clearance"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:86
#: appPlugins/ToolRulesCheck.py:1516
msgid ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:106
#: appPlugins/ToolRulesCheck.py:1002 appPlugins/ToolRulesCheck.py:1008
#: appPlugins/ToolRulesCheck.py:1024 appPlugins/ToolRulesCheck.py:1031
#: appPlugins/ToolRulesCheck.py:1539
msgid "Minimum Annular Ring"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:108
#: appPlugins/ToolRulesCheck.py:1541
msgid ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:116
#: appPlugins/ToolRulesCheck.py:1549
msgid "Minimum acceptable ring value."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:130
#: appPlugins/ToolRulesCheck.py:1209 appPlugins/ToolRulesCheck.py:1284
#: appPlugins/ToolRulesCheck.py:1350 appPlugins/ToolRulesCheck.py:1566
msgid "Silk"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:140
#: appPlugins/ToolRulesCheck.py:1576
msgid "Silk to Silk Clearance"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:142
#: appPlugins/ToolRulesCheck.py:1578
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:162
#: appPlugins/ToolRulesCheck.py:845 appPlugins/ToolRulesCheck.py:851
#: appPlugins/ToolRulesCheck.py:869 appPlugins/ToolRulesCheck.py:1601
msgid "Silk to Solder Mask Clearance"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:164
#: appPlugins/ToolRulesCheck.py:1603
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:184
#: appPlugins/ToolRulesCheck.py:899 appPlugins/ToolRulesCheck.py:905
#: appPlugins/ToolRulesCheck.py:919 appPlugins/ToolRulesCheck.py:926
#: appPlugins/ToolRulesCheck.py:1626
msgid "Silk to Outline Clearance"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:186
#: appPlugins/ToolRulesCheck.py:1628
msgid ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:208
#: appPlugins/ToolRulesCheck.py:1216 appPlugins/ToolRulesCheck.py:1653
msgid "Soldermask"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:218
#: appPlugins/ToolRulesCheck.py:937 appPlugins/ToolRulesCheck.py:964
#: appPlugins/ToolRulesCheck.py:1663
msgid "Minimum Solder Mask Sliver"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:220
#: appPlugins/ToolRulesCheck.py:1665
msgid ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:243
#: appPlugins/ToolRulesCheck.py:1223 appPlugins/ToolRulesCheck.py:1691
msgid "Holes"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:253
#: appPlugins/ToolRulesCheck.py:388 appPlugins/ToolRulesCheck.py:1701
msgid "Hole to Hole Clearance"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:255
#: appPlugins/ToolRulesCheck.py:1703
msgid ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:275
#: appPlugins/ToolRulesCheck.py:362 appPlugins/ToolRulesCheck.py:1726
msgid "Hole Size"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:277
#: appPlugins/ToolRulesCheck.py:1728
msgid ""
"This checks if the drill holes\n"
"sizes are above the threshold."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:285
#: appPlugins/ToolRulesCheck.py:1736
msgid "Minimum acceptable drill size."
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:20
msgid "2-Sided Plugin"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:25 appPlugins/ToolDblSided.py:1008
msgid "PCB Alignment"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:27
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:47
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:282
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:81 appPlugins/ToolCutOut.py:2720
#: appPlugins/ToolDblSided.py:1023 appPlugins/ToolMarkers.py:1503
msgid "Drill Dia"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:49 appPlugins/ToolDblSided.py:1025
#: appPlugins/ToolDblSided.py:1030
msgid "Diameter of the drill for the alignment holes."
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:58 appPlugins/ToolDblSided.py:1041
msgid ""
"The content of the Excellon file.\n"
"X - Pairs of drill holes mirrored vertically from reference point\n"
"Y - Pairs of drill holes mirrored horizontally from reference point\n"
"Manual - no mirroring; drill holes in place"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:78
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:170
msgid "Mirror Axis"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:80 appPlugins/ToolDblSided.py:856
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:92 appPlugins/ToolDblSided.py:844
msgid "Mirror Operation"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:108 appPlugins/ToolDblSided.py:886
msgid "Box"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:109 appMain.py:8664
#: appPlugins/ToolDblSided.py:887
msgid "Snap"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:112
msgid "Axis Ref"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:114 appPlugins/ToolDblSided.py:876
msgid ""
"The coordinates used as reference for the mirror operation.\n"
"Can be:\n"
"- Point -> a set of coordinates (x,y) around which the object is mirrored\n"
"- Box -> a set of coordinates (x, y) obtained from the center of the\n"
"bounding box of another object selected below\n"
"- Snap -> a point defined by the center of a drill hole in a Excellon object"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:20
msgid "Calculators Plugin"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:27
msgid "V-Shape Tool Calculator"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:29
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:47
#: appPlugins/ToolCalculators.py:599
msgid "Tip Diameter"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:49
#: appPlugins/ToolCalculators.py:601
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:61
#: appPlugins/ToolCalculators.py:614
msgid "Tip Angle"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:63
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:77
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:86
msgid "ElectroPlating Calculator"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:88
#: appPlugins/ToolCalculators.py:662
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like graphite ink or calcium hypophosphite ink or palladium chloride."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:105
#: appPlugins/ToolCalculators.py:691
msgid "Board Length"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:107
msgid "This is the board length. In centimeters."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:117
#: appPlugins/ToolCalculators.py:710 appPlugins/ToolCalculators.py:711
msgid "Board Width"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:119
msgid "This is the board width.In centimeters."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:125
msgid "This is the board area."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:135
#: appPlugins/ToolCalculators.py:753
msgid "Current Density"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:141
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:147
#: appPlugins/ToolCalculators.py:774
msgid "Copper Growth"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:153
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:21
msgid "Cutout Plugin"
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:28
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:46 appPlugins/ToolCutOut.py:2325
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:84
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:70
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:100 appPlugins/ToolCutOut.py:2407
#: appPlugins/ToolDrilling.py:2531 appPlugins/ToolMilling.py:4567
msgid "Multi-Depth"
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:107 appPlugins/ToolCutOut.py:2266
msgid "Kind"
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:109 appPlugins/ToolCutOut.py:2268
msgid ""
"Choice of what kind the object we want to cutout is.\n"
"- Single: contain a single PCB Gerber outline object.\n"
"- Panel: a panel PCB Gerber object, which is made\n"
"out of many individual PCB outlines."
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:176 appPlugins/ToolCutOut.py:2489
msgid "Mouse Bytes"
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:236
msgid ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:257 appPlugins/ToolCutOut.py:2612
#: appPlugins/ToolDistance.py:855 appPlugins/ToolFiducials.py:1166
#: appPlugins/ToolMarkers.py:1462
msgid "Big cursor"
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:259 appPlugins/ToolCutOut.py:2614
msgid "Use a big cursor when adding manual gaps."
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:263 appPlugins/ToolCutOut.py:2684
#: appPlugins/ToolCutOut.py:2758
msgid "Cut by Drilling"
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:264 appPlugins/ToolCutOut.py:2685
#: appPlugins/ToolCutOut.py:2761
msgid "Create a series of drill holes following a geometry line."
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:284 appPlugins/ToolCutOut.py:2722
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB by drilling."
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:297 appPlugins/ToolCutOut.py:2735
msgid ""
"Distance between the center of\n"
"two neighboring drill holes."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:21
msgid "Drilling Plugin"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:30 appPlugins/ToolDrilling.py:2375
msgid "Create CNCJob with toolpaths for drilling or milling holes."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:41
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:55
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:56
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:58 appPlugins/ToolDrilling.py:2460
#: appPlugins/ToolIsolation.py:3448 appPlugins/ToolMilling.py:4120
#: appPlugins/ToolNCC.py:4153 appPlugins/ToolPaint.py:3035
msgid "Tool order"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:42 appPlugins/ToolDrilling.py:2461
#: appPlugins/ToolMilling.py:4121
msgid ""
"This set the way that the tools in the tools table are used.\n"
"'Default' --> the order from the file\n"
"'Forward' --> tools will be ordered from small to big\n"
"'Reverse' --> tools will ordered from big to small."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:65
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:67 appPlugins/ToolDrilling.py:2467
#: appPlugins/ToolIsolation.py:3457 appPlugins/ToolMilling.py:4127
#: appPlugins/ToolNCC.py:4165 appPlugins/ToolPaint.py:3044
#: appPlugins/ToolSolderPaste.py:1544
msgid "Forward"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:65
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:67 appPlugins/ToolDrilling.py:2467
#: appPlugins/ToolIsolation.py:3457 appPlugins/ToolMilling.py:4127
#: appPlugins/ToolNCC.py:4165 appPlugins/ToolPaint.py:3044
#: appPlugins/ToolSolderPaste.py:1582
msgid "Reverse"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:107
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:142 appPlugins/ToolSolderPaste.py:1442
msgid "Tool change"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:109 appPlugins/ToolDrilling.py:2755
#: appPlugins/ToolMilling.py:4781
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:115
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:152
msgid "Toolchange Z"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:117
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:155 appPlugins/ToolDrilling.py:2763
#: appPlugins/ToolMilling.py:4789
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:129
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:170 appPlugins/ToolDrilling.py:2806
#: appPlugins/ToolMilling.py:4819
msgid "End move Z"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:131
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:172 appPlugins/ToolDrilling.py:2808
#: appPlugins/ToolMilling.py:4821
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:142
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:186 appPlugins/ToolDrilling.py:2822
#: appPlugins/ToolMilling.py:4835
msgid "End move X,Y"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:144
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:188 appPlugins/ToolDrilling.py:2824
#: appPlugins/ToolMilling.py:4837
msgid ""
"End move X,Y position. In format (x,y).\n"
"If no value is entered then there is no move\n"
"on X,Y plane at the end of the job."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:169
msgid "Spindle Speed"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:183
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:245
msgid "Enable Dwell"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:185
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:247 appPlugins/ToolDrilling.py:2645
#: appPlugins/ToolMilling.py:4731
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:193
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:253 appPlugins/ToolDrilling.py:2657
#: appPlugins/ToolMilling.py:4742
msgid "Number of time units for spindle to dwell."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:202
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:266
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:266
#: appPlugins/ToolDrilling.py:2873 appPlugins/ToolMilling.py:4886
#: appPlugins/ToolSolderPaste.py:1632
msgid "Preprocessor"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:204
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:229
msgid "Drilling Slots"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:277
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:294
msgid "A list of advanced parameters."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:301
msgid "Toolchange X,Y"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:303
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:307 appPlugins/ToolDrilling.py:2778
#: appPlugins/ToolMilling.py:4803
msgid "Toolchange X,Y position."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:311
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:315 appPlugins/ToolDrilling.py:2794
msgid "Start Z"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:313
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:317 appPlugins/ToolDrilling.py:2796
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:338
#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:101
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:367 appPlugins/ToolDrilling.py:2836
#: appPlugins/ToolLevelling.py:1860 appPlugins/ToolMilling.py:4849
msgid "Probe Z depth"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:340
#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:103
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:369 appPlugins/ToolDrilling.py:2838
#: appPlugins/ToolLevelling.py:1862 appPlugins/ToolMilling.py:4851
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:351
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:382 appPlugins/ToolDrilling.py:2855
#: appPlugins/ToolMilling.py:4868
msgid "Feedrate Probe"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:353
#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:116
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:384 appPlugins/ToolDrilling.py:2857
#: appPlugins/ToolLevelling.py:1875 appPlugins/ToolMilling.py:4870
msgid "The feedrate used while the probe is probing."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:363
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:396
msgid "Spindle direction"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:365
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:398
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:377
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:410 appPlugins/ToolDrilling.py:2627
#: appPlugins/ToolMilling.py:4713
msgid "Min Power"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:379
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:412 appPlugins/ToolDrilling.py:2629
#: appPlugins/ToolMilling.py:4715
msgid "The laser power when the laser is travelling."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:390
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:423
msgid "Fast Plunge"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:392
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:425
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:400
msgid "Fast Retract"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:402
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:420
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:440
msgid "Area Exclusion"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:422
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:442
msgid "Area exclusion parameters."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:433
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:453
msgid "Exclusion areas"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:436
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:456 appPlugins/ToolDrilling.py:2893
#: appPlugins/ToolMilling.py:4952
msgid ""
"Include exclusion areas.\n"
"In those areas the travel of the tools\n"
"is forbidden."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:446
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:332
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:466
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:323
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:287 appPlugins/ToolDrilling.py:2964
#: appPlugins/ToolFollow.py:736 appPlugins/ToolIsolation.py:3950
#: appPlugins/ToolMilling.py:5024 appPlugins/ToolNCC.py:4565 appPlugins/ToolPaint.py:3322
msgid "The kind of selection shape used for area selection."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:456
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:476 appPlugins/ToolDrilling.py:2915
#: appPlugins/ToolDrilling.py:2932 appPlugins/ToolMilling.py:4975
#: appPlugins/ToolMilling.py:4992
msgid "Strategy"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:457
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:477 appPlugins/ToolDrilling.py:2933
#: appPlugins/ToolMilling.py:4993
msgid ""
"The strategy followed when encountering an exclusion area.\n"
"Can be:\n"
"- Over -> when encountering the area, the tool will go to a set height\n"
"- Around -> will avoid the exclusion area by going around the area"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:461
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:481 appPlugins/ToolDrilling.py:849
#: appPlugins/ToolDrilling.py:2937 appPlugins/ToolMilling.py:914
#: appPlugins/ToolMilling.py:4997
msgid "Over"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:462
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:482 appPlugins/ToolDrilling.py:849
#: appPlugins/ToolDrilling.py:2938 appPlugins/ToolMilling.py:914
#: appPlugins/ToolMilling.py:4998
msgid "Around"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:468
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:488 appPlugins/ToolDrilling.py:2915
#: appPlugins/ToolDrilling.py:2945 appPlugins/ToolMilling.py:4975
#: appPlugins/ToolMilling.py:5005
msgid "Over Z"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:469
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:489 appPlugins/ToolDrilling.py:2946
#: appPlugins/ToolMilling.py:5006
msgid ""
"The height Z to which the tool will rise in order to avoid\n"
"an interdiction area."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:21
msgid "Film Plugin"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:28 appPlugins/ToolFilm.py:1328
msgid "Adjustments"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:30 appPlugins/ToolFilm.py:1330
msgid "Compensate print distortions."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:44 appPlugins/ToolFilm.py:1344
msgid ""
"A value greater than 1 will compact the film\n"
"while a value less than 1 will jolt it."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:59 appPlugins/ToolFilm.py:1352
msgid ""
"'Length' -> scale by a length value\n"
"'Factor' -> scale by a ratio"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:91
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:149 appPlugins/ToolFilm.py:1384
#: appPlugins/ToolFilm.py:1455
msgid "The reference point to be used as origin for the adjustment."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:154 appPlugins/ToolFiducials.py:978
#: appPlugins/ToolFilm.py:1389 appPlugins/ToolFilm.py:1460 appPlugins/ToolMarkers.py:1420
msgid "Bottom Left"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96 appPlugins/ToolFilm.py:1389
#: appPlugins/ToolMarkers.py:1412
msgid "Top Left"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96 appPlugins/ToolFilm.py:1389
#: appPlugins/ToolMarkers.py:1424
msgid "Bottom Right"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:96 appPlugins/ToolFilm.py:1389
msgid "Top right"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:102
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:118 appPlugins/ToolFilm.py:1412
#: appPlugins/ToolTransform.py:710
msgid "Skew"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:104 appPlugins/ToolFilm.py:1414
msgid ""
"Positive values will skew to the right\n"
"while negative values will skew to the left."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:118
msgid ""
"'Length' -> deform by a length value\n"
"'Angle' -> deform by an angle\n"
"'Factor' -> deform by a ratio between what should be and what is"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:162 appPlugins/ToolFilm.py:1485
#: appPlugins/ToolFilm.py:1495
msgid "Mirror the film geometry on the selected axis or on both."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:185
msgid ""
"Create a PCB film from a Gerber or Geometry object.\n"
"The file is saved in SVG format."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:200 appPlugins/ToolFilm.py:1523
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"If not checked the shape is rectangular."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:224 appPlugins/ToolFilm.py:1563
msgid "Generate a Positive black film or a Negative film."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:230
msgid "Film Color"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:232
msgid "Set the film color when positive film is selected."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:245 appPlugins/ToolFilm.py:1574
msgid "Border"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:247 appPlugins/ToolFilm.py:1576
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:265 appPlugins/ToolFilm.py:1548
msgid "Scale Stroke"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:267 appPlugins/ToolFilm.py:1550
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:274 appPlugins/ToolFilm.py:1668
msgid "SVG"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:275 appPlugins/ToolFilm.py:1669
msgid "PNG"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:276 appPlugins/ToolFilm.py:1670
msgid "PDF"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:279 appPlugins/ToolFilm.py:1659
msgid "Film Type"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:281 appPlugins/ToolFilm.py:1661
msgid ""
"The file type of the saved film. Can be:\n"
"- 'SVG' -> open-source vectorial format\n"
"- 'PNG' -> raster image\n"
"- 'PDF' -> portable document format"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:290 appPlugins/ToolFilm.py:1677
msgid "Page Orientation"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:303 appPlugins/ToolFilm.py:1693
msgid "Page Size"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:304 appPlugins/ToolFilm.py:1694
msgid "A selection of standard ISO 216 page sizes."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:371 appPlugins/ToolFilm.py:1760
msgid "Default value is 96 DPI. Change this value to scale the PNG file."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:20
msgid "Isolation Plugin"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:42
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:41
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:43
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:45
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:42
msgid "Tools Dia"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:49
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:50
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:54 appPlugins/ToolMarkers.py:1473
msgid "Comma separated values"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:56
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:57
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:59 appPlugins/ToolIsolation.py:3449
#: appPlugins/ToolNCC.py:4154 appPlugins/ToolPaint.py:3036
msgid ""
"This set the way that the tools in the tools table are used.\n"
"'Default' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> means that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:70
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:53
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:71
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:73
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:80 appPlugins/ToolIsolation.py:3614
#: appPlugins/ToolMilling.py:4512
msgid "V-Tip Dia"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:56
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:73
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:75 appPlugins/ToolIsolation.py:3617
#: appPlugins/ToolMilling.py:4515
msgid "The tip diameter for V-Shape Tool"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:82
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:68
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:83
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:86
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:94 appPlugins/ToolIsolation.py:3630
#: appPlugins/ToolMilling.py:4528
msgid "V-Tip Angle"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:84
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:71
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:85
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:88 appPlugins/ToolIsolation.py:3633
#: appPlugins/ToolMilling.py:4531
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:98
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:107
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:99
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:108
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:102
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:111
msgid ""
"Depth of cut into material. Negative value.\n"
"In application units."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:117
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:118
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:120 appPlugins/ToolPaint.py:3071
msgid ""
"Diameter for the new tool to add in the Tool Table.\n"
"If the tool is V-shape type then this value is automatically\n"
"calculated from the other parameters."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:138
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:158
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141 appPlugins/ToolCutOut.py:2363
msgid "Tool Parameters"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:177 appPlugins/ToolIsolation.py:3684
msgid "Pad Passes"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:179 appPlugins/ToolIsolation.py:3686
msgid ""
"Width of the extra isolation gap for pads only,\n"
"in number (integer) of tool widths."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:248
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:274
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:231 appPlugins/ToolDrilling.py:2740
#: appPlugins/ToolIsolation.py:3766 appPlugins/ToolMilling.py:4766
#: appPlugins/ToolNCC.py:4440 appPlugins/ToolPaint.py:3237
#: appPlugins/ToolSolderPaste.py:1620
msgid "Common Parameters"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:250
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:276
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:233 appPlugins/ToolDrilling.py:2742
#: appPlugins/ToolFollow.py:710 appPlugins/ToolIsolation.py:3768
#: appPlugins/ToolMilling.py:4768 appPlugins/ToolNCC.py:4442 appPlugins/ToolPaint.py:3238
#: appPlugins/ToolPanelize.py:1328 appPlugins/ToolSolderPaste.py:1622
#: appPlugins/ToolSub.py:804
msgid "Parameters that are common for all tools."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:261
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:287
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:244 appPlugins/ToolIsolation.py:3779
#: appPlugins/ToolNCC.py:4453 appPlugins/ToolPaint.py:3248
msgid "Rest"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:263
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:289
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:246 appPlugins/ToolIsolation.py:3782
#: appPlugins/ToolNCC.py:4457 appPlugins/ToolPaint.py:3251
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will process copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to process the copper features that\n"
"could not be processed by previous tool, until there is\n"
"nothing left to process or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275 appPlugins/ToolIsolation.py:3804
msgid "Combine"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277 appPlugins/ToolIsolation.py:3806
msgid "Combine all passes into one object"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:283 appPlugins/ToolIsolation.py:3839
msgid "Except"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:284 appPlugins/ToolIsolation.py:3840
msgid ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object below\n"
"will be subtracted from the isolation geometry."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:290
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:349 appPlugins/ToolIsolation.py:3813
#: appPlugins/ToolNCC.py:4578
msgid "Check validity"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:292
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:351 appPlugins/ToolIsolation.py:3815
#: appPlugins/ToolNCC.py:4580
msgid ""
"If checked then the tools diameters are verified\n"
"if they will provide a complete isolation."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:315 appPlugins/ToolIsolation.py:3879
msgid ""
"Isolation scope. Choose what to isolate:\n"
"- 'All' -> Isolate all the polygons in the object\n"
"- 'Area Selection' -> Isolate polygons within a selection area.\n"
"- 'Polygon Selection' -> Isolate a selection of polygons.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:323
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:279 appPlugins/ToolIsolation.py:3887
#: appPlugins/ToolPaint.py:3288
msgid "Polygon Selection"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:342 appPlugins/ToolIsolation.py:3915
msgid "Interiors"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:344 appPlugins/ToolIsolation.py:3917
msgid ""
"When checked the user can select interiors of a polygon.\n"
"(holes in the polygon)."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:349 appPlugins/ToolIsolation.py:3794
msgid "Forced Rest"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:351 appPlugins/ToolIsolation.py:3796
msgid ""
"When checked the isolation will be done with the current tool even if\n"
"interiors of a polygon (holes in the polygon) could not be isolated.\n"
"Works when 'rest machining' is used."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:365
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:339
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:303
msgid "Progressive"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:368
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:342
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:307
msgid ""
"- 'Normal' - normal plotting, done at the end of the job\n"
"- 'Progressive' - each shape is plotted after it is generated"
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:20
msgid "Levelling Plugin"
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:42 appPlugins/ToolLevelling.py:1891
msgid ""
"Choose a mode for height map generation.\n"
"- Manual: will pick a selection of probe points by clicking on canvas\n"
"- Grid: will automatically generate a grid of probe points"
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:49 appMain.py:8659
#: appPlugins/ToolLevelling.py:1898
msgid "Grid"
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:56 appPlugins/ToolLevelling.py:1905
msgid ""
"Choose a method for approximation of heights from autolevelling data.\n"
"- Voronoi: will generate a Voronoi diagram\n"
"- Bilinear: will use bilinear interpolation. Usable only for grid mode."
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:62 appPlugins/ToolLevelling.py:1911
msgid "Voronoi"
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:63 appPlugins/ToolLevelling.py:1912
msgid "Bilinear"
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:73 appPlugins/ToolLevelling.py:1927
msgid "The number of grid columns."
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:83 appPlugins/ToolLevelling.py:1938
msgid "The number of grid rows."
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:89 appPlugins/ToolLevelling.py:1848
msgid "Probe Z travel"
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:91 appPlugins/ToolLevelling.py:1850
msgid "The safe Z for probe travelling between probe points."
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:114 appPlugins/ToolLevelling.py:1873
msgid "Probe Feedrate"
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:130 appPlugins/ToolLevelling.py:1949
msgid "Controller"
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:132 appPlugins/ToolLevelling.py:1951
msgid ""
"The kind of controller for which to generate\n"
"height map gcode."
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:142 appPlugins/ToolLevelling.py:2178
msgid "Step"
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:144 appPlugins/ToolLevelling.py:2180
msgid "Each jog action will move the axes with this value."
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:157 appPlugins/ToolLevelling.py:2194
msgid "Feedrate when jogging."
msgstr ""

#: appGUI/preferences/tools/ToolsLevelPrefGroupUI.py:170
msgid "Safe height (Z) distance when jogging to origin."
msgstr ""

#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:20
msgid "Markers Options"
msgstr ""

#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:42
#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:96 appPlugins/ToolMarkers.py:1296
msgid "Shape of the marker."
msgstr ""

#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:46 appPlugins/ToolMarkers.py:1300
msgid "Semi-Cross"
msgstr ""

#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:56 appPlugins/ToolMarkers.py:1310
msgid "The thickness of the line that makes the corner marker."
msgstr ""

#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:70 appPlugins/ToolMarkers.py:1324
msgid "The length of the line that makes the corner marker."
msgstr ""

#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:83 appPlugins/ToolMarkers.py:1505
msgid "Drill Diameter"
msgstr ""

#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:100 appPlugins/ToolMarkers.py:1356
msgid "Edge"
msgstr ""

#: appGUI/preferences/tools/ToolsMarkersPrefGroupUI.py:108 appPlugins/ToolMarkers.py:1338
msgid "Offset locations from the set reference."
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:21
msgid "Milling Plugin"
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:30 appPlugins/ToolMilling.py:3922
msgid "Create CNCJob with toolpaths for milling either Geometry or drill holes."
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:128
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:145
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:200 appPlugins/ToolMilling.py:4612
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:215
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:232
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER preprocessor is used,\n"
"this value is the power of laser."
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:268
msgid ""
"The Preprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:305
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:149
#: appPlugins/ToolDrilling.py:2776 appPlugins/ToolMilling.py:4801
msgid "Toolchange X-Y"
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:328
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:344 appPlugins/ToolMilling.py:4667
msgid "Re-cut"
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:346
#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:358 appPlugins/ToolMilling.py:4669
#: appPlugins/ToolMilling.py:4682
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:506
msgid "Add Polish"
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:508
msgid ""
"Will add a Paint section at the end of the GCode.\n"
"A metallic brush will clean the material after milling."
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:548 appPlugins/ToolMilling.py:4484
msgid ""
"Algorithm for polishing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:565
msgid "Excellon Milling"
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:567
msgid "Will mill Excellon holes progressively from the center of the hole."
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:580 appPlugins/ToolMilling.py:4285
msgid ""
"Milling type:\n"
"- Drills -> will mill the drills associated with this tool\n"
"- Slots -> will mill the slots associated with this tool\n"
"- Both -> will mill both drills and mills or whatever is available"
msgstr ""

#: appGUI/preferences/tools/ToolsMillPrefGroupUI.py:600 appPlugins/ToolMilling.py:4305
msgid "The diameter of the tool who will do the milling"
msgstr ""

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:21
msgid "NCC Plugin"
msgstr ""

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:28
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:251
msgid "Offset value"
msgstr ""

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:312 appPlugins/ToolNCC.py:4531
msgid ""
"Selection of area to be processed.\n"
"- 'Itself' - the processing extent is based on the object that is processed.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be processed.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:21
msgid "Paint Plugin"
msgstr ""

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:259 appPlugins/ToolPaint.py:3278
msgid ""
"Selection of area to be processed.\n"
"- 'Polygon Selection' - left mouse click to add/remove polygons to be processed.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be processed.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple areas.\n"
"- 'All Polygons' - the process will start after click.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:20
msgid "Panelize Plugin"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:29
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:95 appPlugins/ToolPanelize.py:1339
msgid "Geo"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:96 appPlugins/ToolPanelize.py:1340
msgid "Panel Type"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:98 appPlugins/ToolPanelize.py:1342
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:109 appPlugins/ToolPanelize.py:1352
msgid ""
"Active only for Geometry panel type.\n"
"When checked the application will find\n"
"any two overlapping Line elements in the panel\n"
"and will remove the overlapping parts, keeping only one of them."
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:117
msgid "Constrain within"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:119 appPlugins/ToolPanelize.py:1362
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:132 appPlugins/ToolPanelize.py:1374
msgid "Width (DX)"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:134 appPlugins/ToolPanelize.py:1376
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:145 appPlugins/ToolPanelize.py:1386
msgid "Height (DY)"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:147 appPlugins/ToolPanelize.py:1388
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:21
msgid "SolderPaste Plugin"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:30
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:54
msgid "New Nozzle Dia"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:56
#: appPlugins/ToolSolderPaste.py:1313
msgid "Diameter for the new tool to add in the Tool Table"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:69
#: appPlugins/ToolSolderPaste.py:1362
msgid "Offset from the boundary."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:70
#: appPlugins/ToolSolderPaste.py:1363
msgid "Fraction of tool diameter."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:87
msgid "Z Dispense Start"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:89
#: appPlugins/ToolSolderPaste.py:1408
msgid "The height (Z) when solder paste dispensing starts."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:100
#: appPlugins/ToolSolderPaste.py:1533
msgid "Z Dispense"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:102
#: appPlugins/ToolSolderPaste.py:1421
msgid "The height (Z) when doing solder paste dispensing."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:113
msgid "Z Dispense Stop"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:115
#: appPlugins/ToolSolderPaste.py:1434
msgid "The height (Z) when solder paste dispensing stops."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:126
msgid "Z Travel"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:128
#: appPlugins/ToolSolderPaste.py:1382
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:140
msgid "Z Toolchange"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:142
#: appPlugins/ToolSolderPaste.py:1469
msgid "The height (Z) for tool (nozzle) change."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:151
#: appPlugins/ToolSolderPaste.py:1455
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:165
#: appPlugins/ToolSolderPaste.py:1494
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:173
#: appPlugins/ToolSolderPaste.py:1502
msgid "Feedrate while moving as fast as possible."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:192
#: appPlugins/ToolSolderPaste.py:1521
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:204
msgid "Feedrate Z Dispense"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:206
#: appPlugins/ToolSolderPaste.py:1535
msgid ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:217
msgid "Spindle Speed FWD"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:219
#: appPlugins/ToolSolderPaste.py:1560
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:231
msgid "Dwell FWD"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:233
#: appPlugins/ToolSolderPaste.py:1574
msgid "Pause after solder dispensing."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:243
msgid "Spindle Speed REV"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:245
#: appPlugins/ToolSolderPaste.py:1597
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:257
msgid "Dwell REV"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:259
#: appPlugins/ToolSolderPaste.py:1611
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:268
#: appPlugins/ToolSolderPaste.py:1634
msgid "Files that control the GCode generation."
msgstr ""

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:17
msgid "Substractor Plugin"
msgstr ""

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:26
msgid ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."
msgstr ""

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:37 appPlugins/ToolSub.py:927
msgid "Close paths"
msgstr ""

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:38 appPlugins/ToolSub.py:928
msgid "Checking this will close the paths cut by the subtractor object."
msgstr ""

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:41 appPlugins/ToolSub.py:813
msgid "Delete source"
msgstr ""

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:43 appPlugins/ToolSub.py:815
msgid ""
"When checked will delete the source objects\n"
"after a successful operation."
msgstr ""

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:21
msgid "Transform Plugin"
msgstr ""

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:30
msgid ""
"Various transformations that can be applied\n"
"on a application object."
msgstr ""

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:44 appPlugins/ToolTransform.py:600
msgid ""
"The reference point for Rotate, Skew, Scale, Mirror.\n"
"Can be:\n"
"- Origin -> it is the 0, 0 point\n"
"- Selection -> the center of the bounding box of the selected objects\n"
"- Point -> a custom point defined by X,Y coordinates\n"
"- Object -> the center of the bounding box of a specific object"
msgstr ""

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70 appPlugins/ToolTransform.py:632
msgid "The type of object used as reference."
msgstr ""

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:145
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:159
msgid ""
"Angle, in degrees.\n"
"Float number between -360 and 359."
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:21
msgid "Autocompleter Keywords"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:25
#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:35
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:26
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:25
msgid "Restore"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:26
msgid "Restore the autocompleter keywords list to the default state."
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:27
#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:37
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:28
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:27 appPlugins/ToolDrilling.py:2975
#: appPlugins/ToolMilling.py:5035
msgid "Delete All"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:28
msgid "Delete all autocompleter keywords from the list."
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:36
msgid "Keywords list"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:38
msgid ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:59
#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:68
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:59
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:57
msgid "Extension"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:60
msgid "A keyword to be added or deleted to the list."
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:68
msgid "Add keyword"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:69
msgid "Add a keyword to the list"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:70
msgid "Delete keyword"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:71
msgid "Delete a keyword from the list"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:21
msgid "Excellon File associations"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:36
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:27
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:26
msgid "Restore the extension list to the default state."
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:38
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:29
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:28
msgid "Delete all extensions from the list."
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:46
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:37
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:36
msgid "Extensions list"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:48
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:39
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:38
msgid ""
"List of file extensions to be\n"
"associated with FlatCAM."
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:69
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:60
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:58
msgid "A file extension to be added or deleted to the list."
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:77
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:68
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:66
msgid "Add Extension"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:78
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:69
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:67
msgid "Add a file extension to the list"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:79
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:70
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:68
msgid "Delete Extension"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:80
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:71
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:69
msgid "Delete a file extension from the list"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:87
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:78
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:76
msgid "Apply Association"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:88
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:79
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:77
msgid ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."
msgstr ""

#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:22
msgid "GCode File associations"
msgstr ""

#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:21
msgid "Gerber File associations"
msgstr ""

#: appMain.py:955
msgid "The application is initializing ..."
msgstr ""

#: appMain.py:979
msgid "Could not find the Language files. The App strings are missing."
msgstr ""

#: appMain.py:1156
msgid ""
"The application is initializing ...\n"
"Canvas initialization started."
msgstr ""

#: appMain.py:1197
msgid ""
"The application is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""

#: appMain.py:1351 appMain.py:10389
msgid "New Project - Not saved"
msgstr ""

#: appMain.py:1681
msgid "Found old default preferences files. Please reboot the application to update."
msgstr ""

#: appMain.py:1748
msgid "Open Config file failed."
msgstr ""

#: appMain.py:1763
msgid "Open Script file failed."
msgstr ""

#: appMain.py:1790
msgid "Open Excellon file failed."
msgstr ""

#: appMain.py:1803
msgid "Open GCode file failed."
msgstr ""

#: appMain.py:1816
msgid "Open Gerber file failed."
msgstr ""

#: appMain.py:2586 appMain.py:2602 appMain.py:2645 appMain.py:2661 appMain.py:2680
msgid "The Editor could not start."
msgstr ""

#: appMain.py:2586 appMain.py:5321 appMain.py:5802 appMain.py:6211 appMain.py:6295
#: appMain.py:6475 appMain.py:6784 appMain.py:6983 appMain.py:7029 appMain.py:7076
#: appMain.py:7131 appMain.py:7179 appMain.py:7337 appMain.py:9779 appMain.py:9876
#: appMain.py:9918 appMain.py:9960 appMain.py:10002 appMain.py:10043 appMain.py:10088
#: appMain.py:10133 appMain.py:10649 appPlugins/ToolDblSided.py:498
#: appPlugins/ToolDblSided.py:586 appPlugins/ToolExtract.py:408
#: appPlugins/ToolExtract.py:723 appPlugins/ToolExtract.py:826 appPlugins/ToolFilm.py:302
#: appPlugins/ToolFilm.py:309 appPlugins/ToolFilm.py:313 appPlugins/ToolMilling.py:2041
#: appPlugins/ToolMove.py:195 appPlugins/ToolPunchGerber.py:533
#: appPlugins/ToolPunchGerber.py:537 appPlugins/ToolReport.py:127
#: appPlugins/ToolTransform.py:167 appPlugins/ToolTransform.py:318
#: appPlugins/ToolTransform.py:350 appPlugins/ToolTransform.py:395
#: appPlugins/ToolTransform.py:429 appPlugins/ToolTransform.py:464
#: appPlugins/ToolTransform.py:501 camlib.py:2464 camlib.py:2537 camlib.py:2605
#: camlib.py:2680
msgid "No object is selected."
msgstr ""

#: appMain.py:2593
msgid "Select a Geometry, Gerber, Excellon or CNCJob Object to edit."
msgstr ""

#: appMain.py:2618
msgid ""
"Simultaneous editing of tools geometry in a MultiGeo Geometry is not possible.\n"
"Edit only one geometry at a time."
msgstr ""

#: appMain.py:2625 appPlugins/ToolDrilling.py:953 appPlugins/ToolDrilling.py:1233
#: appPlugins/ToolDrilling.py:1272 appPlugins/ToolIsolation.py:842
#: appPlugins/ToolIsolation.py:877 appPlugins/ToolMilling.py:1648
#: appPlugins/ToolMilling.py:1717 appPlugins/ToolNCC.py:534 appPlugins/ToolNCC.py:569
#: appPlugins/ToolPaint.py:493 appPlugins/ToolPaint.py:547
msgid "No Tool Selected"
msgstr ""

#: appMain.py:2720
msgid "EDITOR Area"
msgstr ""

#: appMain.py:2723
msgid "Editor is activated ..."
msgstr ""

#: appMain.py:2756
msgid "Do you want to save the changes?"
msgstr ""

#: appMain.py:2807
msgid "Object empty after edit."
msgstr ""

#: appMain.py:2812 appMain.py:2830 appMain.py:2861 appMain.py:2877
msgid "Editor exited. Editor content saved."
msgstr ""

#: appMain.py:2881 appMain.py:2933
msgid "Select a Gerber, Geometry, Excellon or CNCJob Object to update."
msgstr ""

#: appMain.py:2891
msgid "is updated, returning to App..."
msgstr ""

#: appMain.py:2908
msgid "Editor exited. Editor content was not saved."
msgstr ""

#: appMain.py:2958
msgid "Select a Gerber, Geometry, Excellon or CNCJob object to update."
msgstr ""

#: appMain.py:3101 appMain.py:3107
msgid "Save to file"
msgstr ""

#: appMain.py:3148
msgid "Exported file to"
msgstr ""

#: appMain.py:3185
msgid "Failed to open recent files file for writing."
msgstr ""

#: appMain.py:3196
msgid "Failed to open recent projects file for writing."
msgstr ""

#: appMain.py:3251
msgid "PCB Manufacturing files Viewer/Editor with Plugins"
msgstr ""

#: appMain.py:3252
msgid "Development"
msgstr ""

#: appMain.py:3253
msgid "DOWNLOAD"
msgstr ""

#: appMain.py:3254
msgid "Issue tracker"
msgstr ""

#: appMain.py:3258 appMain.py:3838 appMain.py:4021
msgid "Close"
msgstr ""

#: appMain.py:3273
msgid "Licensed under the MIT license"
msgstr ""

#: appMain.py:3282
msgid ""
"Permission is hereby granted, free of charge, to any person obtaining a copy\n"
"of this software and associated documentation files (the \"Software\"), to deal\n"
"in the Software without restriction, including without limitation the rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."
msgstr ""

#: appMain.py:3304
msgid ""
"Some of the icons used are from the following sources:<br><div>Icons by <a href=\"https://"
"www.flaticon.com/authors/freepik\" title=\"Freepik\">Freepik</a> from <a href=\"https://"
"www.flaticon.com/\"             title=\"Flaticon\">www.flaticon.com</a></div><div>Icons "
"by <a target=\"_blank\" href=\"https://icons8.com\">Icons8</a></div>Icons by <a href="
"\"http://www.onlinewebfonts.com\">oNline Web Fonts</a><div>Icons by <a href=\"https://www."
"flaticon.com/authors/pixel-perfect\" title=\"Pixel perfect\">Pixel perfect</a> from <a "
"href=\"https://www.flaticon.com/\" title=\"Flaticon\">www.flaticon.com</a></"
"div><div>Icons by <a href=\"https://www.flaticon.com/authors/anggara\" title=\"Anggara\"> "
"Anggara </a> from <a href=\"https://www.flaticon.com/\" title=\"Flaticon\">www.flaticon."
"com</a></div><div>Icons by <a href=\"https://www.flaticon.com/authors/kharisma\" title="
"\"Kharisma\"> Kharisma </a> from <a href=\"https://www.flaticon.com/\" title=\"Flaticon"
"\">www.flaticon.com</a></div>"
msgstr ""

#: appMain.py:3346
msgid "Splash"
msgstr ""

#: appMain.py:3352
msgid "Programmers"
msgstr ""

#: appMain.py:3358
msgid "Translators"
msgstr ""

#: appMain.py:3364
msgid "License"
msgstr ""

#: appMain.py:3370
msgid "Attributions"
msgstr ""

#: appMain.py:3615
msgid "Programmer"
msgstr ""

#: appMain.py:3616
msgid "Status"
msgstr ""

#: appMain.py:3617 appMain.py:3699
msgid "E-mail"
msgstr ""

#: appMain.py:3621
msgid "FlatCAM Author"
msgstr ""

#: appMain.py:3625
msgid "FlatCAM Evo Author/Maintainer"
msgstr ""

#: appMain.py:3697
msgid "Language"
msgstr ""

#: appMain.py:3698
msgid "Translator"
msgstr ""

#: appMain.py:3806
#, python-format
msgid "This program is %s and free in a very wide meaning of the word."
msgstr ""

#: appMain.py:3807
msgid "Yet it cannot evolve without <b>contributions</b>."
msgstr ""

#: appMain.py:3808
msgid "If you want to see this application grow and become better and better"
msgstr ""

#: appMain.py:3809
msgid "you can <b>contribute</b> to the development yourself by:"
msgstr ""

#: appMain.py:3810
msgid "Pull Requests on the Bitbucket repository, if you are a developer"
msgstr ""

#: appMain.py:3812
msgid "Bug Reports by providing the steps required to reproduce the bug"
msgstr ""

#: appMain.py:3814
msgid "If you like what you have seen so far ..."
msgstr ""

#: appMain.py:3815
msgid "Donations are NOT required."
msgstr ""

#: appMain.py:3815
msgid "But they are welcomed"
msgstr ""

#: appMain.py:3846
msgid "Contribute"
msgstr ""

#: appMain.py:3867
msgid "Links Exchange"
msgstr ""

#: appMain.py:3880 appMain.py:3900
msgid "Soon ..."
msgstr ""

#: appMain.py:3887
msgid "How To's"
msgstr ""

#: appMain.py:4007
msgid "Alternative website"
msgstr ""

#: appMain.py:4008
msgid ""
"This entry will resolve to another website if:\n"
"\n"
"1. FlatCAM.org website is down\n"
"2. Someone forked FlatCAM project and wants to point\n"
"to his own website\n"
"\n"
"If you can't get any informations about the application\n"
"use the YouTube channel link from the Help menu."
msgstr ""

#: appMain.py:4042 appTranslation.py:217
msgid ""
"There are files/objects modified.\n"
"Do you want to Save the project?"
msgstr ""

#: appMain.py:4365
msgid "Selected Excellon file extensions registered with FlatCAM."
msgstr ""

#: appMain.py:4382
msgid "Selected GCode file extensions registered with FlatCAM."
msgstr ""

#: appMain.py:4398
msgid "Selected Gerber file extensions registered with FlatCAM."
msgstr ""

#: appMain.py:4586 appMain.py:4649 appMain.py:4680
msgid "At least two objects are required for join. Objects currently selected"
msgstr ""

#: appMain.py:4595
msgid ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility is to "
"convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may be lost and "
"the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""

#: appMain.py:4610 appMain.py:4621
msgid "Geometry merging finished"
msgstr ""

#: appMain.py:4644
msgid "Failed. Excellon joining works only on Excellon objects."
msgstr ""

#: appMain.py:4657
msgid "Excellon merging finished"
msgstr ""

#: appMain.py:4675
msgid "Failed. Gerber joining works only on Gerber objects."
msgstr ""

#: appMain.py:4685
msgid "Gerber merging finished"
msgstr ""

#: appMain.py:4705 appMain.py:4741
msgid "Failed. Select a Geometry Object and try again."
msgstr ""

#: appMain.py:4709 appMain.py:4745
msgid "Expected a GeometryObject, got"
msgstr ""

#: appMain.py:4724
msgid "A Geometry object was converted to MultiGeo type."
msgstr ""

#: appMain.py:4762
msgid "A Geometry object was converted to SingleGeo type."
msgstr ""

#: appMain.py:4995
msgid "Units cannot be changed while the editor is active."
msgstr ""

#: appMain.py:5004
msgid ""
"Changing the units of the project\n"
"will scale all objects.\n"
"\n"
"Do you want to continue?"
msgstr ""

#: appMain.py:5058
msgid "Converted units to"
msgstr ""

#: appMain.py:5092
msgid "Workspace enabled."
msgstr ""

#: appMain.py:5095
msgid "Workspace disabled."
msgstr ""

#: appMain.py:5117
msgid "FlatCAM log opened."
msgstr ""

#: appMain.py:5166 appPlugins/ToolCutOut.py:428 appPlugins/ToolIsolation.py:1009
#: appPlugins/ToolIsolation.py:1331 appPlugins/ToolIsolation.py:1446
#: appPlugins/ToolMilling.py:2063 appPlugins/ToolMilling.py:2176 appPlugins/ToolNCC.py:1183
#: appPlugins/ToolNCC.py:1308 appPlugins/ToolNCC.py:1380 appPlugins/ToolPaint.py:661
#: appPlugins/ToolPaint.py:829 appPlugins/ToolPaint.py:962 appPlugins/ToolSolderPaste.py:373
#: appPlugins/ToolSolderPaste.py:559
msgid "Please enter a tool diameter with non-zero value, in Float format."
msgstr ""

#: appMain.py:5176
msgid "Tool adding ..."
msgstr ""

#: appMain.py:5177
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""

#: appMain.py:5267
msgid "Delete objects"
msgstr ""

#: appMain.py:5268
msgid ""
"Are you sure you want to permanently delete\n"
"the selected objects?"
msgstr ""

#: appMain.py:5323
msgid "Save the work in Editor and try again ..."
msgstr ""

#: appMain.py:5356
msgid "Object deleted"
msgstr ""

#: appMain.py:5369
msgid "Click to set the origin ..."
msgstr ""

#: appMain.py:5408
msgid "Setting Origin..."
msgstr ""

#: appMain.py:5429 appMain.py:5550 appMain.py:5662
msgid "Origin set"
msgstr ""

#: appMain.py:5449
msgid "Origin coordinates specified but incomplete."
msgstr ""

#: appMain.py:5496
msgid "Moving to Origin..."
msgstr ""

#: appMain.py:5500 appMain.py:5568
msgid "Failed. No object(s) selected..."
msgstr ""

#: appMain.py:5572
msgid "Quadrant 2"
msgstr ""

#: appMain.py:5573
msgid "Quadrant 1"
msgstr ""

#: appMain.py:5574
msgid "Quadrant 3"
msgstr ""

#: appMain.py:5575
msgid "Quadrant 4"
msgstr ""

#: appMain.py:5699
msgid "Jump to ..."
msgstr ""

#: appMain.py:5700 appMain.py:5960
msgid "Enter the coordinates in format X,Y:"
msgstr ""

#: appMain.py:5711 appMain.py:5970
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr ""

#: appMain.py:5812
msgid "Locate ..."
msgstr ""

#: appMain.py:5959
msgid "Move to ..."
msgstr ""

#: appMain.py:6516 appMain.py:9427
msgid "Aborting."
msgstr ""

#: appMain.py:6516
msgid "The current task will be gracefully closed as soon as possible..."
msgstr ""

#: appMain.py:6523
msgid "The current task was gracefully closed on user request..."
msgstr ""

#: appMain.py:6726
msgid "Not available for Legacy 2D graphic mode."
msgstr ""

#: appMain.py:6795 appMain.py:6816 appPlugins/ToolCutOut.py:561
#: appPlugins/ToolIsolation.py:2978 appPlugins/ToolNCC.py:3916 appPlugins/ToolPaint.py:2790
msgid "Selected tool can't be used here. Pick another."
msgstr ""

#: appMain.py:6807 appMain.py:6826 appPlugins/ToolIsolation.py:2991
#: appPlugins/ToolNCC.py:3929 appPlugins/ToolPaint.py:2803
msgid "Tool from DB added in Tool Table."
msgstr ""

#: appMain.py:6828
msgid "Adding tool from DB is not allowed for this object."
msgstr ""

#: appMain.py:6846
msgid "Save Tools Database"
msgstr ""

#: appMain.py:6847
msgid ""
"One or more Tools are edited.\n"
"Do you want to save?"
msgstr ""

#: appMain.py:7079 appMain.py:7133 appMain.py:7181
msgid "Enter the Angle value:"
msgstr ""

#: appMain.py:7112
msgid "Rotation done."
msgstr ""

#: appMain.py:7114
msgid "Rotation movement was not executed."
msgstr ""

#: appMain.py:7163
msgid "Skew on X axis done."
msgstr ""

#: appMain.py:7211
msgid "Skew on Y axis done."
msgstr ""

#: appMain.py:7282
msgid "New Grid ..."
msgstr ""

#: appMain.py:7283
msgid "Enter a Grid Value:"
msgstr ""

#: appMain.py:7292 appMain.py:7317
msgid "Please enter a grid value with non-zero value, in Float format."
msgstr ""

#: appMain.py:7297
msgid "New Grid added"
msgstr ""

#: appMain.py:7299
msgid "Grid already exists"
msgstr ""

#: appMain.py:7301
msgid "Adding New Grid cancelled"
msgstr ""

#: appMain.py:7323
msgid "Grid Value does not exist"
msgstr ""

#: appMain.py:7325
msgid "Grid Value deleted"
msgstr ""

#: appMain.py:7327
msgid "Delete Grid value cancelled"
msgstr ""

#: appMain.py:7341
msgid "Name copied to clipboard ..."
msgstr ""

#: appMain.py:7897 appMain.py:7903 appMain.py:7909 appMain.py:7915
#: appObjects/ObjectCollection.py:991 appObjects/ObjectCollection.py:997
#: appObjects/ObjectCollection.py:1003 appObjects/ObjectCollection.py:1009
#: appObjects/ObjectCollection.py:1015 appObjects/ObjectCollection.py:1021
msgid "selected"
msgstr ""

#: appMain.py:8246 appMain.py:8250
msgid "Select an Gerber or Excellon file to view it's source file."
msgstr ""

#: appMain.py:8253
msgid "Viewing the source code of the selected object."
msgstr ""

#: appMain.py:8267
msgid "Source Editor"
msgstr ""

#: appMain.py:8303 appMain.py:8310
msgid "There is no selected object for which to see it's source file code."
msgstr ""

#: appMain.py:8319
msgid "Failed to load the source code for the selected object"
msgstr ""

#: appMain.py:8352
msgid "Go to Line ..."
msgstr ""

#: appMain.py:8353
msgid "Line"
msgstr ""

#: appMain.py:8387
msgid "Redrawing all objects"
msgstr ""

#: appMain.py:8484
msgid "Failed to load recent item list."
msgstr ""

#: appMain.py:8491
msgid "Failed to parse recent item list."
msgstr ""

#: appMain.py:8501
msgid "Failed to load recent projects item list."
msgstr ""

#: appMain.py:8508
msgid "Failed to parse recent project item list."
msgstr ""

#: appMain.py:8532
msgid "Recent files list was reset."
msgstr ""

#: appMain.py:8546
msgid "Recent projects list was reset."
msgstr ""

#: appMain.py:8571
msgid "Clear Recent projects"
msgstr ""

#: appMain.py:8595
msgid "Clear Recent files"
msgstr ""

#: appMain.py:8653
msgid "FlatCAM Evo"
msgstr ""

#: appMain.py:8657
msgid "Release date"
msgstr ""

#: appMain.py:8661
msgid "Displayed"
msgstr ""

#: appMain.py:8673
msgid "Canvas"
msgstr ""

#: appMain.py:8678
msgid "Workspace active"
msgstr ""

#: appMain.py:8682
msgid "Workspace size"
msgstr ""

#: appMain.py:8686
msgid "Workspace orientation"
msgstr ""

#: appMain.py:8748
msgid "Failed checking for latest version. Could not connect."
msgstr ""

#: appMain.py:8755
msgid "Could not parse information about latest version."
msgstr ""

#: appMain.py:8765
msgid "The application is up to date!"
msgstr ""

#: appMain.py:8769
msgid "Newer Version Available"
msgstr ""

#: appMain.py:8771
msgid "There is a newer version available for download:"
msgstr ""

#: appMain.py:8801
msgid ""
"OpenGL canvas initialization failed. HW or HW configuration not supported.Change the "
"graphic engine to Legacy(2D) in Edit -> Preferences -> General tab.\n"
"\n"
msgstr ""

#: appMain.py:8892
msgid "All plots disabled."
msgstr ""

#: appMain.py:8898
msgid "All non selected plots disabled."
msgstr ""

#: appMain.py:8904
msgid "All plots enabled."
msgstr ""

#: appMain.py:8910
msgid "All non selected plots enabled."
msgstr ""

#: appMain.py:8918
msgid "Selected plots enabled..."
msgstr ""

#: appMain.py:8926
msgid "Selected plots disabled..."
msgstr ""

#: appMain.py:8968
msgid "Enabling plots ..."
msgstr ""

#: appMain.py:9021
msgid "Disabling plots ..."
msgstr ""

#: appMain.py:9189
msgid "Set alpha level ..."
msgstr ""

#: appMain.py:9588 appMain.py:9626 appMain.py:9669 appMain.py:9733 appMain.py:10512
#: appMain.py:11884 appMain.py:11952
msgid ""
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""

#: appMain.py:9591
msgid "Opening Gerber file."
msgstr ""

#: appMain.py:9629
msgid "Opening Excellon file."
msgstr ""

#: appMain.py:9672
msgid "Opening G-Code file."
msgstr ""

#: appMain.py:9724 appMain.py:9728
msgid "Open HPGL2"
msgstr ""

#: appMain.py:9736
msgid "Opening HPGL2 file."
msgstr ""

#: appMain.py:9758 appMain.py:9761
msgid "Open Configuration File"
msgstr ""

#: appMain.py:9787
msgid "Only Geometry, Gerber and CNCJob objects can be used."
msgstr ""

#: appMain.py:9837
msgid "Data must be a 3D array with last dimension 3 or 4"
msgstr ""

#: appMain.py:9843 appMain.py:9848
msgid "Export PNG Image"
msgstr ""

#: appMain.py:9881 appMain.py:10093
msgid "Failed. Only Gerber objects can be saved as Gerber files..."
msgstr ""

#: appMain.py:9894
msgid "Save Gerber source file"
msgstr ""

#: appMain.py:9923
msgid "Failed. Only Script objects can be saved as TCL Script files..."
msgstr ""

#: appMain.py:9936
msgid "Save Script source file"
msgstr ""

#: appMain.py:9965
msgid "Failed. Only Document objects can be saved as Document files..."
msgstr ""

#: appMain.py:9978
msgid "Save Document source file"
msgstr ""

#: appMain.py:10007 appMain.py:10048 appMain.py:11037
msgid "Failed. Only Excellon objects can be saved as Excellon files..."
msgstr ""

#: appMain.py:10015 appMain.py:10020
msgid "Save Excellon source file"
msgstr ""

#: appMain.py:10138
msgid "Only Geometry objects can be used."
msgstr ""

#: appMain.py:10189 appMain.py:10193
msgid "Import SVG"
msgstr ""

#: appMain.py:10219 appMain.py:10223
msgid "Import DXF"
msgstr ""

#: appMain.py:10250
msgid ""
"There are files/objects opened.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""

#: appMain.py:10336 appMain.py:10364 appMain.py:10388 appMain.py:10409
msgid "seconds"
msgstr ""

#: appMain.py:10388
msgid "Project created in"
msgstr ""

#: appMain.py:10391
msgid "New Project created"
msgstr ""

#: appMain.py:10421
msgid "New TCL script file created in Code Editor."
msgstr ""

#: appMain.py:10448 appMain.py:10450 appMain.py:10485 appMain.py:10487
msgid "Open TCL script"
msgstr ""

#: appMain.py:10514
msgid "Executing ScriptObject file."
msgstr ""

#: appMain.py:10522 appMain.py:10526
msgid "Run TCL script"
msgstr ""

#: appMain.py:10549
msgid "TCL script file opened in Code Editor and executed."
msgstr ""

#: appMain.py:10597 appMain.py:10604
msgid "Save Project As ..."
msgstr ""

#: appMain.py:10641
msgid "General_print"
msgstr ""

#: appMain.py:10649
msgid "Print everything in the workspace."
msgstr ""

#: appMain.py:10655 appMain.py:10663
msgid "Save Object as PDF ..."
msgstr ""

#: appMain.py:10673
msgid "Printing PDF ..."
msgstr ""

#: appMain.py:10862
msgid "PDF file saved to"
msgstr ""

#: appMain.py:10884 appMain.py:11144 appMain.py:11278 appMain.py:11345
msgid "Exporting ..."
msgstr ""

#: appMain.py:10927
msgid "SVG file exported to"
msgstr ""

#: appMain.py:10942 appMain.py:10946
msgid "Import FlatCAM Preferences"
msgstr ""

#: appMain.py:10957
msgid "Imported Defaults from"
msgstr ""

#: appMain.py:10976 appMain.py:10982
msgid "Export FlatCAM Preferences"
msgstr ""

#: appMain.py:11002
msgid "Exported preferences to"
msgstr ""

#: appMain.py:11135
msgid "Excellon file exported to"
msgstr ""

#: appMain.py:11149 appMain.py:11156 appMain.py:11283 appMain.py:11290 appMain.py:11350
#: appMain.py:11357
msgid "Could not export."
msgstr ""

#: appMain.py:11270
msgid "Gerber file exported to"
msgstr ""

#: appMain.py:11336
msgid "DXF file exported to"
msgstr ""

#: appMain.py:11375 appMain.py:11431 appMain.py:11526 appMain.py:11565 appMain.py:11633
#: appMain.py:11850 appMain.py:11940 appPlugins/ToolImage.py:245 appPlugins/ToolPDF.py:96
msgid "File no longer available."
msgstr ""

#: appMain.py:11385 appMain.py:11441
msgid "Not supported type is picked as parameter. Only Geometry and Gerber are supported"
msgstr ""

#: appMain.py:11402 appMain.py:11459 appMain.py:11547 appMain.py:11616 appMain.py:11746
#: appMain.py:11811 appMain.py:11871 appPlugins/ToolImage.py:343 appPlugins/ToolPDF.py:212
msgid "Opened"
msgstr ""

#: appMain.py:11404 appMain.py:11461 appPlugins/ToolImage.py:328
#: appPlugins/ToolPcbWizard.py:362 tclCommands/TclCommandImportSvg.py:84
msgid "Importing"
msgstr ""

#: appMain.py:11412 appMain.py:11469
msgid "Import failed."
msgstr ""

#: appMain.py:11503 appMain.py:11770 appMain.py:11835
msgid "Failed to open file"
msgstr ""

#: appMain.py:11506 appMain.py:11773 appMain.py:11838
msgid "Failed to parse file"
msgstr ""

#: appMain.py:11518
msgid "Object is not Gerber file or empty. Aborting object creation."
msgstr ""

#: appMain.py:11529 appMain.py:11599 appMain.py:11723 appMain.py:11797 appMain.py:11853
#: tclCommands/TclCommandOpenDXF.py:90
msgid "Opening"
msgstr ""

#: appMain.py:11540
msgid "Open Gerber failed. Probable not a Gerber file."
msgstr ""

#: appMain.py:11575 appPlugins/ToolPcbWizard.py:335
msgid "This is not Excellon file."
msgstr ""

#: appMain.py:11578
msgid "Cannot open file"
msgstr ""

#: appMain.py:11596 appPlugins/ToolPDF.py:270 appPlugins/ToolPcbWizard.py:357
msgid "No geometry found in file"
msgstr ""

#: appMain.py:11609
msgid "Open Excellon file failed. Probable not an Excellon file."
msgstr ""

#: appMain.py:11645
msgid "Reading GCode file"
msgstr ""

#: appMain.py:11651 appPlugins/ToolPDF.py:194
msgid "Failed to open"
msgstr ""

#: appMain.py:11712
msgid "This is not GCODE"
msgstr ""

#: appMain.py:11736
msgid ""
"Failed to create CNCJob Object. Probable not a GCode file. Try to load it from File "
"menu.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during processing"
msgstr ""

#: appMain.py:11792
msgid "Object is not HPGL2 file or empty. Aborting object creation."
msgstr ""

#: appMain.py:11804
msgid "Failed. Probable not a HPGL2 file."
msgstr ""

#: appMain.py:11830
msgid "TCL script file opened in Code Editor."
msgstr ""

#: appMain.py:11864
msgid "Failed to open TCL Script."
msgstr ""

#: appMain.py:11887
msgid "Opening FlatCAM Config file."
msgstr ""

#: appMain.py:11914
msgid "Failed to open config file"
msgstr ""

#: appMain.py:11949
msgid "Loading Project ... Please Wait ..."
msgstr ""

#: appMain.py:11955
msgid "Opening FlatCAM Project file."
msgstr ""

#: appMain.py:11960
msgid "Parsing..."
msgstr ""

#: appMain.py:11972 appMain.py:11976 appMain.py:11994
msgid "Failed to open project file"
msgstr ""

#: appMain.py:12010
msgid "Legacy Project"
msgstr ""

#: appMain.py:12011
msgid ""
"The project was made with an older app version.\n"
"It may not load correctly.\n"
"\n"
"Do you want to continue?"
msgstr ""

#: appMain.py:12049
msgid "Import Settings"
msgstr ""

#: appMain.py:12050
msgid "Do you want to import the loaded project settings?"
msgstr ""

#: appMain.py:12089
msgid "Loading..."
msgstr ""

#: appMain.py:12180 appMain.py:12187
msgid "Loading Project ... restoring"
msgstr ""

#: appMain.py:12195
msgid "Project loaded from"
msgstr ""

#: appMain.py:12229
msgid "Saving Project ..."
msgstr ""

#: appMain.py:12273 appMain.py:12329
msgid "Project saved to"
msgstr ""

#: appMain.py:12284
msgid "The object is used by another application."
msgstr ""

#: appMain.py:12304
msgid "Failed to verify project file"
msgstr ""

#: appMain.py:12304 appMain.py:12313 appMain.py:12321 appMain.py:12334
msgid "Retry to save it."
msgstr ""

#: appMain.py:12311 appMain.py:12319 appMain.py:12332
msgid "Failed to parse saved project file"
msgstr ""

#: appMain.py:12369
msgid "Save cancelled because source file is empty. Try to export the file."
msgstr ""

#: appObjects/AppObject.py:171
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""

#: appObjects/AppObject.py:177
msgid "New object with name:"
msgstr ""

#: appObjects/AppObject.py:190
msgid "Converting units to "
msgstr ""

#: appObjects/AppObject.py:220
msgid "Gerber X2 drill file detected. Converted to Excellon object."
msgstr ""

#: appObjects/AppObject.py:264 appObjects/AppObject.py:270 appObjects/AppObject.py:276
#: appObjects/AppObject.py:282 appObjects/AppObject.py:288 appObjects/AppObject.py:294
msgid "created/selected"
msgstr ""

#: appObjects/AppObject.py:524
msgid "CREATE A NEW TCL SCRIPT"
msgstr ""

#: appObjects/AppObject.py:525
msgid "TCL Tutorial is here"
msgstr ""

#: appObjects/AppObject.py:527
msgid "Commands list"
msgstr ""

#: appObjects/AppObject.py:528
msgid ""
"Type >help< followed by Run Code for a list of Tcl Commands (displayed in Tcl Shell)."
msgstr ""

#: appObjects/AppObjectTemplate.py:347
msgid "Name changed from"
msgstr ""

#: appObjects/AppObjectTemplate.py:347 appObjects/ObjectCollection.py:567
msgid "to"
msgstr ""

#: appObjects/AppObjectTemplate.py:358 tclCommands/TclCommandSetOrigin.py:113
msgid "Offsetting..."
msgstr ""

#: appObjects/AppObjectTemplate.py:372 appObjects/AppObjectTemplate.py:377
msgid "Scaling could not be executed."
msgstr ""

#: appObjects/AppObjectTemplate.py:381 appObjects/AppObjectTemplate.py:389
msgid "Scale done."
msgstr ""

#: appObjects/AppObjectTemplate.py:387
msgid "Scaling..."
msgstr ""

#: appObjects/AppObjectTemplate.py:405
msgid "Skewing..."
msgstr ""

#: appObjects/AppObjectTemplate.py:544 appPlugins/ToolCalculators.py:684
#: appPlugins/ToolReport.py:168
msgid "Dimensions"
msgstr ""

#: appObjects/AppObjectTemplate.py:552 appPlugins/ToolReport.py:177
msgid "Tools"
msgstr ""

#: appObjects/AppObjectTemplate.py:567
msgid "Calculating dimensions ... Please wait."
msgstr ""

#: appObjects/AppObjectTemplate.py:741 appObjects/AppObjectTemplate.py:749
msgid "Polygons"
msgstr ""

#: appObjects/AppObjectTemplate.py:743
msgid "LineStrings"
msgstr ""

#: appObjects/AppObjectTemplate.py:748
msgid "Elements"
msgstr ""

#: appObjects/AppObjectTemplate.py:786 appObjects/AppObjectTemplate.py:857
#: appPlugins/ToolReport.py:435 appPlugins/ToolReport.py:509
msgid "Drills number"
msgstr ""

#: appObjects/AppObjectTemplate.py:787 appObjects/AppObjectTemplate.py:859
#: appPlugins/ToolReport.py:436 appPlugins/ToolReport.py:511
msgid "Slots number"
msgstr ""

#: appObjects/AppObjectTemplate.py:789 appPlugins/ToolReport.py:438
msgid "Drills total number:"
msgstr ""

#: appObjects/AppObjectTemplate.py:790 appPlugins/ToolReport.py:439
msgid "Slots total number:"
msgstr ""

#: appObjects/AppObjectTemplate.py:818 appObjects/AppObjectTemplate.py:821
#: appObjects/AppObjectTemplate.py:824 appObjects/AppObjectTemplate.py:854
#: appObjects/AppObjectTemplate.py:861 appObjects/AppObjectTemplate.py:864
#: appPlugins/ToolReport.py:470 appPlugins/ToolReport.py:473 appPlugins/ToolReport.py:476
#: appPlugins/ToolReport.py:506 appPlugins/ToolReport.py:513 appPlugins/ToolReport.py:516
msgid "Present"
msgstr ""

#: appObjects/AppObjectTemplate.py:819 appObjects/AppObjectTemplate.py:855
#: appPlugins/ToolReport.py:471 appPlugins/ToolReport.py:507
msgid "Solid Geometry"
msgstr ""

#: appObjects/AppObjectTemplate.py:822 appObjects/AppObjectTemplate.py:862
#: appPlugins/ToolReport.py:474 appPlugins/ToolReport.py:514
msgid "GCode Text"
msgstr ""

#: appObjects/AppObjectTemplate.py:825 appObjects/AppObjectTemplate.py:865
#: appPlugins/ToolReport.py:477 appPlugins/ToolReport.py:517
msgid "GCode Geometry"
msgstr ""

#: appObjects/AppObjectTemplate.py:833 appObjects/AppObjectTemplate.py:908
#: appPlugins/ToolReport.py:485 appPlugins/ToolReport.py:560
msgid "Tool Data"
msgstr ""

#: appObjects/AppObjectTemplate.py:872 appPlugins/ToolReport.py:524
msgid "Depth of Cut"
msgstr ""

#: appObjects/AppObjectTemplate.py:884 appPlugins/ToolReport.py:536
msgid "Clearance Height"
msgstr ""

#: appObjects/AppObjectTemplate.py:922 appPlugins/ToolReport.py:574
msgid "Routing time"
msgstr ""

#: appObjects/AppObjectTemplate.py:953 appObjects/AppObjectTemplate.py:961
#: appPlugins/ToolReport.py:605 appPlugins/ToolReport.py:613
msgid "Box Area"
msgstr ""

#: appObjects/AppObjectTemplate.py:956 appObjects/AppObjectTemplate.py:964
#: appPlugins/ToolReport.py:608 appPlugins/ToolReport.py:616
msgid "Convex_Hull Area"
msgstr ""

#: appObjects/AppObjectTemplate.py:971 appObjects/AppObjectTemplate.py:974
#: appPlugins/ToolReport.py:623 appPlugins/ToolReport.py:626
msgid "Copper Area"
msgstr ""

#: appObjects/CNCJobObject.py:732 appPlugins/ToolLevelling.py:1476
#: appPlugins/ToolLevelling.py:1668 appPlugins/ToolSolderPaste.py:1184
msgid "Export cancelled ..."
msgstr ""

#: appObjects/CNCJobObject.py:770
msgid "File saved to"
msgstr ""

#: appObjects/CNCJobObject.py:794
msgid "Code Review"
msgstr ""

#: appObjects/CNCJobObject.py:842
msgid "CNC Machine Code could not be updated"
msgstr ""

#: appObjects/CNCJobObject.py:846
msgid "CNC Machine Code was updated"
msgstr ""

#: appObjects/DocumentObject.py:168
msgid "Document Editor"
msgstr ""

#: appObjects/ExcellonObject.py:996 appObjects/ExcellonObject.py:1101
#: appPlugins/ToolDrilling.py:1973 appPlugins/ToolMilling.py:2537
#: appPlugins/ToolMilling.py:2642
msgid "Please select one or more tools from the list and try again."
msgstr ""

#: appObjects/ExcellonObject.py:1001 appPlugins/ToolMilling.py:2542
msgid "Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr ""

#: appObjects/ExcellonObject.py:1002 appPlugins/ToolDrilling.py:908
#: appPlugins/ToolDrilling.py:1285 appPlugins/ToolDrilling.py:2486
#: appPlugins/ToolIsolation.py:902 appPlugins/ToolIsolation.py:3551
#: appPlugins/ToolMilling.py:1656 appPlugins/ToolMilling.py:1729
#: appPlugins/ToolMilling.py:2543 appPlugins/ToolMilling.py:4254 appPlugins/ToolNCC.py:592
#: appPlugins/ToolNCC.py:2483 appPlugins/ToolNCC.py:4266 appPlugins/ToolPaint.py:569
#: appPlugins/ToolPaint.py:3128
msgid "Tool"
msgstr ""

#: appObjects/ExcellonObject.py:1110 appPlugins/ToolMilling.py:2651
msgid "Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr ""

#: appObjects/GeometryObject.py:513
msgid "Vertex points calculated."
msgstr ""

#: appObjects/GeometryObject.py:725 appObjects/GeometryObject.py:879
#: appPlugins/ToolMilling.py:3097 appPlugins/ToolMilling.py:3411
msgid ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""

#: appObjects/GeometryObject.py:792 appObjects/GeometryObject.py:940
#: appPlugins/ToolMilling.py:3171 appPlugins/ToolMilling.py:3464
msgid "G-Code parsing in progress..."
msgstr ""

#: appObjects/GeometryObject.py:794 appObjects/GeometryObject.py:942
#: appPlugins/ToolMilling.py:3173 appPlugins/ToolMilling.py:3466
msgid "G-Code parsing finished..."
msgstr ""

#: appObjects/GeometryObject.py:801 appObjects/GeometryObject.py:951
#: appObjects/GeometryObject.py:1124 appPlugins/ToolMilling.py:3180
#: appPlugins/ToolMilling.py:3475
msgid "Finished G-Code processing"
msgstr ""

#: appObjects/GeometryObject.py:803 appObjects/GeometryObject.py:953
#: appPlugins/ToolMilling.py:3182 appPlugins/ToolMilling.py:3477
msgid "G-Code processing failed with error"
msgstr ""

#: appObjects/GeometryObject.py:846 appPlugins/ToolMilling.py:3225
msgid "Cancelled. Empty file, it has no geometry"
msgstr ""

#: appObjects/GeometryObject.py:969 appObjects/GeometryObject.py:974
#: appObjects/GeometryObject.py:1131 appPlugins/ToolMilling.py:3504
#: appPlugins/ToolMilling.py:3519 appPlugins/ToolSolderPaste.py:1079
msgid "CNCjob created"
msgstr ""

#: appObjects/GeometryObject.py:1157 appObjects/GeometryObject.py:1166
#: appParsers/ParseGerber.py:2112 appParsers/ParseGerber.py:2122
msgid "Scale factor has to be a number: integer or float."
msgstr ""

#: appObjects/GeometryObject.py:1246 appParsers/ParseGerber.py:2241
msgid ""
"An (x,y) pair of values are needed. Probable you entered only one value in the Offset "
"field."
msgstr ""

#: appObjects/GeometryObject.py:1337
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y)\n"
"but now there is only one value, not two."
msgstr ""

#: appObjects/GerberObject.py:420 appPlugins/ToolIsolation.py:1586
msgid "Buffering solid geometry"
msgstr ""

#: appObjects/GerberObject.py:465 appObjects/GerberObject.py:514
msgid "Operation could not be done."
msgstr ""

#: appObjects/GerberObject.py:613 appObjects/GerberObject.py:688
#: appPlugins/ToolIsolation.py:1827 appPlugins/ToolIsolation.py:2248
#: appPlugins/ToolNCC.py:2052 appPlugins/ToolNCC.py:3072 appPlugins/ToolNCC.py:3453
msgid "Isolation geometry could not be generated."
msgstr ""

#: appObjects/GerberObject.py:640 appObjects/GerberObject.py:731
#: appPlugins/ToolIsolation.py:1925 appPlugins/ToolIsolation.py:2141
#: appPlugins/ToolIsolation.py:2368
msgid "Isolation geometry created"
msgstr ""

#: appObjects/ObjectCollection.py:268
msgid "Script"
msgstr ""

#: appObjects/ObjectCollection.py:447
msgid "Batch Save"
msgstr ""

#: appObjects/ObjectCollection.py:567
msgid "Object renamed from"
msgstr ""

#: appObjects/ObjectCollection.py:1067
msgid "Cause of error"
msgstr ""

#: appObjects/ObjectCollection.py:1267
msgid "All objects are selected."
msgstr ""

#: appObjects/ObjectCollection.py:1277
msgid "Objects selection is cleared."
msgstr ""

#: appObjects/ScriptObject.py:157
msgid "Script Editor"
msgstr ""

#: appParsers/ParseExcellon.py:292
msgid "This is GCODE mark"
msgstr ""

#: appParsers/ParseExcellon.py:439
msgid ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"
msgstr ""

#: appParsers/ParseExcellon.py:442
msgid ""
"was found but the Excellon file have no informations regarding the tool diameters "
"therefore the application will try to load it by using some 'fake' diameters.\n"
"The user needs to edit the resulting Excellon object and change the diameters to reflect "
"the real diameters."
msgstr ""

#: appParsers/ParseExcellon.py:979
msgid ""
"Excellon Parser error.\n"
"Parsing Failed. Line"
msgstr ""

#: appParsers/ParseFont.py:304
msgid "Font not supported, try another one."
msgstr ""

#: appParsers/ParseGerber.py:446
msgid "Gerber processing. Parsing"
msgstr ""

#: appParsers/ParseGerber.py:475
msgid "Gerber X2 format detected. Parsing may not be done correctly."
msgstr ""

#: appParsers/ParseGerber.py:479
msgid "Drill file Gerber X2 format detected. Parsing may not be done correctly."
msgstr ""

#: appParsers/ParseGerber.py:1171 appParsers/ParseGerber.py:1272
#: appParsers/ParseHPGL2.py:293 appParsers/ParseHPGL2.py:307 appParsers/ParseHPGL2.py:326
#: appParsers/ParseHPGL2.py:350 appParsers/ParseHPGL2.py:385
msgid "Coordinates missing, line ignored"
msgstr ""

#: appParsers/ParseGerber.py:1173 appParsers/ParseGerber.py:1274
msgid "GERBER file might be CORRUPT. Check the file !!!"
msgstr ""

#: appParsers/ParseGerber.py:1227
msgid ""
"Region does not have enough points. File will be processed but there are parser errors. "
"Line number"
msgstr ""

#: appParsers/ParseGerber.py:1664 appParsers/ParseHPGL2.py:420
msgid "Gerber processing. Joining polygons"
msgstr ""

#: appParsers/ParseGerber.py:1682
msgid "Gerber processing. Applying Gerber polarity."
msgstr ""

#: appParsers/ParseGerber.py:1740
msgid "Gerber Line"
msgstr ""

#: appParsers/ParseGerber.py:1740
msgid "Gerber Line Content"
msgstr ""

#: appParsers/ParseGerber.py:1741
msgid "Gerber Parser ERROR"
msgstr ""

#: appParsers/ParseGerber.py:2663
msgid "Gerber Buffer done."
msgstr ""

#: appParsers/ParseHPGL2.py:200
msgid "HPGL2 processing. Parsing"
msgstr ""

#: appParsers/ParseHPGL2.py:432
msgid "HPGL2 Line"
msgstr ""

#: appParsers/ParseHPGL2.py:432
msgid "HPGL2 Line Content"
msgstr ""

#: appParsers/ParseHPGL2.py:433
msgid "HPGL2 Parser ERROR"
msgstr ""

#: appPlugins/ToolAlignObjects.py:121
msgid "Align Tool"
msgstr ""

#: appPlugins/ToolAlignObjects.py:172
msgid "There is no aligned FlatCAM object selected..."
msgstr ""

#: appPlugins/ToolAlignObjects.py:182
msgid "There is no aligner FlatCAM object selected..."
msgstr ""

#: appPlugins/ToolAlignObjects.py:204 appPlugins/ToolAlignObjects.py:268
msgid "First Point"
msgstr ""

#: appPlugins/ToolAlignObjects.py:204 appPlugins/ToolAlignObjects.py:283
msgid "Click on the START point."
msgstr ""

#: appPlugins/ToolAlignObjects.py:263 appPlugins/ToolDblSided.py:480
#: appPlugins/ToolFiducials.py:826 appPlugins/ToolMarkers.py:1119
msgid "Cancelled by user request."
msgstr ""

#: appPlugins/ToolAlignObjects.py:268 appPlugins/ToolAlignObjects.py:290
#: appPlugins/ToolDistance.py:382 appPlugins/ToolMove.py:129 appPlugins/ToolQRCode.py:274
msgid "Click on the DESTINATION point ..."
msgstr ""

#: appPlugins/ToolAlignObjects.py:268 appPlugins/ToolAlignObjects.py:283
#: appPlugins/ToolAlignObjects.py:290
msgid "Or right click to cancel."
msgstr ""

#: appPlugins/ToolAlignObjects.py:283 appPlugins/ToolAlignObjects.py:290
#: appPlugins/ToolFiducials.py:1002
msgid "Second Point"
msgstr ""

#: appPlugins/ToolAlignObjects.py:410
msgid "MOVING object"
msgstr ""

#: appPlugins/ToolAlignObjects.py:412
msgid ""
"Specify the type of object to be aligned.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""

#: appPlugins/ToolAlignObjects.py:441
msgid "Object to be aligned."
msgstr ""

#: appPlugins/ToolAlignObjects.py:449
msgid "DESTINATION object"
msgstr ""

#: appPlugins/ToolAlignObjects.py:451
msgid ""
"Specify the type of object to be aligned to.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""

#: appPlugins/ToolAlignObjects.py:480
msgid "Object to be aligned to. Aligner."
msgstr ""

#: appPlugins/ToolAlignObjects.py:499
msgid "Alignment Type"
msgstr ""

#: appPlugins/ToolAlignObjects.py:501
msgid ""
"The type of alignment can be:\n"
"- Single Point -> it require a single point of sync, the action will be a translation\n"
"- Dual Point -> it require two points of sync, the action will be translation followed by "
"rotation"
msgstr ""

#: appPlugins/ToolAlignObjects.py:507
msgid "Single Point"
msgstr ""

#: appPlugins/ToolAlignObjects.py:508
msgid "Dual Point"
msgstr ""

#: appPlugins/ToolAlignObjects.py:517
msgid "Align Object"
msgstr ""

#: appPlugins/ToolAlignObjects.py:520
msgid ""
"Align the specified object to the aligner object.\n"
"If only one point is used then it assumes translation.\n"
"If tho points are used it assume translation and rotation."
msgstr ""

#: appPlugins/ToolAlignObjects.py:529 appPlugins/ToolCalculators.py:1043
#: appPlugins/ToolCopperThieving.py:1747 appPlugins/ToolCutOut.py:2768
#: appPlugins/ToolDblSided.py:1121 appPlugins/ToolDrilling.py:3010
#: appPlugins/ToolEtchCompensation.py:486 appPlugins/ToolExtract.py:1424
#: appPlugins/ToolFiducials.py:1194 appPlugins/ToolFilm.py:1787 appPlugins/ToolFollow.py:758
#: appPlugins/ToolInvertGerber.py:294 appPlugins/ToolIsolation.py:3994
#: appPlugins/ToolLevelling.py:2322 appPlugins/ToolMarkers.py:1589
#: appPlugins/ToolMilling.py:5069 appPlugins/ToolNCC.py:4603
#: appPlugins/ToolObjectDistance.py:612 appPlugins/ToolOptimal.py:689
#: appPlugins/ToolPaint.py:3349 appPlugins/ToolPanelize.py:1419
#: appPlugins/ToolPunchGerber.py:2368 appPlugins/ToolQRCode.py:996
#: appPlugins/ToolRulesCheck.py:1767 appPlugins/ToolSolderPaste.py:1736
#: appPlugins/ToolSub.py:947 appPlugins/ToolTransform.py:1011
msgid "Reset Tool"
msgstr ""

#: appPlugins/ToolAlignObjects.py:532 appPlugins/ToolCalculators.py:1046
#: appPlugins/ToolCopperThieving.py:1750 appPlugins/ToolCutOut.py:2771
#: appPlugins/ToolDblSided.py:1124 appPlugins/ToolDrilling.py:3013
#: appPlugins/ToolEtchCompensation.py:489 appPlugins/ToolExtract.py:1427
#: appPlugins/ToolFiducials.py:1197 appPlugins/ToolFilm.py:1790 appPlugins/ToolFollow.py:761
#: appPlugins/ToolInvertGerber.py:297 appPlugins/ToolIsolation.py:3997
#: appPlugins/ToolLevelling.py:2325 appPlugins/ToolMarkers.py:1592
#: appPlugins/ToolMilling.py:5072 appPlugins/ToolNCC.py:4606
#: appPlugins/ToolObjectDistance.py:615 appPlugins/ToolOptimal.py:692
#: appPlugins/ToolPaint.py:3352 appPlugins/ToolPanelize.py:1422
#: appPlugins/ToolPunchGerber.py:2371 appPlugins/ToolQRCode.py:999
#: appPlugins/ToolRulesCheck.py:1770 appPlugins/ToolSolderPaste.py:1739
#: appPlugins/ToolSub.py:950 appPlugins/ToolTransform.py:1014
msgid "Will reset the tool parameters."
msgstr ""

#: appPlugins/ToolCalculators.py:207
msgid "Cut width (tool diameter) calculated."
msgstr ""

#: appPlugins/ToolCalculators.py:229
msgid "Tool diameter (cut width) cannot be smaller than the tip diameter."
msgstr ""

#: appPlugins/ToolCalculators.py:235
msgid "Cut depth (Cut Z) calculated."
msgstr ""

#: appPlugins/ToolCalculators.py:502
msgid "V-Shape Tool"
msgstr ""

#: appPlugins/ToolCalculators.py:503
msgid "Units Conversion"
msgstr ""

#: appPlugins/ToolCalculators.py:504
msgid "ElectroPlating"
msgstr ""

#: appPlugins/ToolCalculators.py:505
msgid "Tinning"
msgstr ""

#: appPlugins/ToolCalculators.py:543 appPlugins/ToolCalculators.py:558
#: appPlugins/ToolCalculators.py:573
msgid "Here you enter the value to be converted from imperial to metric"
msgstr ""

#: appPlugins/ToolCalculators.py:546 appPlugins/ToolCalculators.py:561
#: appPlugins/ToolCalculators.py:576
msgid "Here you enter the value to be converted from metric to imperial"
msgstr ""

#: appPlugins/ToolCalculators.py:552
msgid "oz"
msgstr ""

#: appPlugins/ToolCalculators.py:553
msgid "gram"
msgstr ""

#: appPlugins/ToolCalculators.py:567
msgid "fl oz"
msgstr ""

#: appPlugins/ToolCalculators.py:568 appPlugins/ToolCalculators.py:945
#: appPlugins/ToolCalculators.py:965 appPlugins/ToolCalculators.py:1020
msgid "mL"
msgstr ""

#: appPlugins/ToolCalculators.py:615
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""

#: appPlugins/ToolCalculators.py:627
msgid "This is the depth to cut into the material."
msgstr ""

#: appPlugins/ToolCalculators.py:638
msgid ""
"This is the actual tool diameter\n"
"at the desired depth of cut."
msgstr ""

#: appPlugins/ToolCalculators.py:651
msgid "Calculate either the depth of cut or the effective tool diameter."
msgstr ""

#: appPlugins/ToolCalculators.py:676
msgid "Area Calculation"
msgstr ""

#: appPlugins/ToolCalculators.py:681
msgid "Determine the board area."
msgstr ""

#: appPlugins/ToolCalculators.py:692
msgid "Board Length."
msgstr ""

#: appPlugins/ToolCalculators.py:699 appPlugins/ToolCalculators.py:718
#: appPlugins/ToolCalculators.py:737 appPlugins/ToolCopperThieving.py:1705
msgid "cm"
msgstr ""

#: appPlugins/ToolCalculators.py:730
msgid "Board area."
msgstr ""

#: appPlugins/ToolCalculators.py:754
msgid ""
"Current density applied to the board. \n"
"In Amperes per Square Feet ASF."
msgstr ""

#: appPlugins/ToolCalculators.py:775
msgid "Thickness of the deposited copper."
msgstr ""

#: appPlugins/ToolCalculators.py:783
msgid "um"
msgstr ""

#: appPlugins/ToolCalculators.py:799
msgid "Output"
msgstr ""

#: appPlugins/ToolCalculators.py:803
msgid "Current Value"
msgstr ""

#: appPlugins/ToolCalculators.py:804
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply."
msgstr ""

#: appPlugins/ToolCalculators.py:825
msgid "Time"
msgstr ""

#: appPlugins/ToolCalculators.py:826
msgid "The time calculated to deposit copper."
msgstr ""

#: appPlugins/ToolCalculators.py:851
msgid ""
"Calculator for chemical quantities\n"
"required for tinning PCB's."
msgstr ""

#: appPlugins/ToolCalculators.py:863
msgid "Solution"
msgstr ""

#: appPlugins/ToolCalculators.py:865
msgid "Choose one solution for tinning."
msgstr ""

#: appPlugins/ToolCalculators.py:877
msgid "Stannous Chloride."
msgstr ""

#: appPlugins/ToolCalculators.py:885 appPlugins/ToolCalculators.py:905
#: appPlugins/ToolCalculators.py:925 appPlugins/ToolCalculators.py:996
msgid "g"
msgstr ""

#: appPlugins/ToolCalculators.py:896 appPlugins/ToolCalculators.py:897
msgid "Thiourea"
msgstr ""

#: appPlugins/ToolCalculators.py:917
msgid "Sulfamic Acid."
msgstr ""

#: appPlugins/ToolCalculators.py:937
msgid "Distilled Water."
msgstr ""

#: appPlugins/ToolCalculators.py:956
msgid "Soap"
msgstr ""

#: appPlugins/ToolCalculators.py:957
msgid "Liquid soap."
msgstr ""

#: appPlugins/ToolCalculators.py:980
msgid "Optional"
msgstr ""

#: appPlugins/ToolCalculators.py:986
msgid ""
"Sodium hypophosphite.\n"
"Optional, for solution stability.\n"
"Warning: List 1 chemical in USA."
msgstr ""

#: appPlugins/ToolCalculators.py:1012
msgid "Volume"
msgstr ""

#: appPlugins/ToolCalculators.py:1013
msgid "Desired volume of tinning solution."
msgstr ""

#: appPlugins/ToolCalculators.py:1034
msgid "Calculate the chemical quantities for the desired volume of tinning solution."
msgstr ""

#: appPlugins/ToolCopperThieving.py:216 appPlugins/ToolCopperThieving.py:242
msgid "Lines Grid works only for 'itself' reference ..."
msgstr ""

#: appPlugins/ToolCopperThieving.py:227
msgid "Solid fill selected."
msgstr ""

#: appPlugins/ToolCopperThieving.py:232
msgid "Dots grid fill selected."
msgstr ""

#: appPlugins/ToolCopperThieving.py:237
msgid "Squares grid fill selected."
msgstr ""

#: appPlugins/ToolCopperThieving.py:260 appPlugins/ToolCopperThieving.py:358
#: appPlugins/ToolCopperThieving.py:972 appPlugins/ToolFiducials.py:300
#: appPlugins/ToolFiducials.py:615 appPlugins/ToolMarkers.py:356
#: appPlugins/ToolMarkers.py:391 appPlugins/ToolMarkers.py:422 appPlugins/ToolMarkers.py:484
#: appPlugins/ToolMarkers.py:819 appPlugins/ToolMarkers.py:928
#: appPlugins/ToolMarkers.py:1040 appPlugins/ToolOptimal.py:209 appPlugins/ToolQRCode.py:226
msgid "There is no Gerber object loaded ..."
msgstr ""

#: appPlugins/ToolCopperThieving.py:273 appPlugins/ToolCopperThieving.py:872
msgid "Append geometry"
msgstr ""

#: appPlugins/ToolCopperThieving.py:328 appPlugins/ToolCopperThieving.py:923
#: appPlugins/ToolCopperThieving.py:1131
msgid "Append source file"
msgstr ""

#: appPlugins/ToolCopperThieving.py:341 appPlugins/ToolCopperThieving.py:936
msgid "Copper Thieving Tool done."
msgstr ""

#: appPlugins/ToolCopperThieving.py:368 appPlugins/ToolCopperThieving.py:388
#: appPlugins/ToolCutOut.py:642 appPlugins/ToolCutOut.py:1023 appPlugins/ToolCutOut.py:1411
#: appPlugins/ToolCutOut.py:1503 appPlugins/ToolCutOut.py:1547 appPlugins/ToolCutOut.py:1650
#: appPlugins/ToolDrilling.py:923 appPlugins/ToolDrilling.py:1938
#: appPlugins/ToolEtchCompensation.py:181 appPlugins/ToolFollow.py:194
#: appPlugins/ToolFollow.py:244 appPlugins/ToolInvertGerber.py:130
#: appPlugins/ToolIsolation.py:1162 appPlugins/ToolIsolation.py:1226
#: appPlugins/ToolIsolation.py:1594 appPlugins/ToolIsolation.py:1623
#: appPlugins/ToolIsolation.py:2604 appPlugins/ToolLevelling.py:325
#: appPlugins/ToolMilling.py:655 appPlugins/ToolMilling.py:872
#: appPlugins/ToolMilling.py:1358 appPlugins/ToolMilling.py:1702
#: appPlugins/ToolMilling.py:1786 appPlugins/ToolMilling.py:2715
#: appPlugins/ToolMilling.py:2738 appPlugins/ToolMilling.py:2903 appPlugins/ToolNCC.py:999
#: appPlugins/ToolNCC.py:1068 appPlugins/ToolNCC.py:1513 appPlugins/ToolNCC.py:1563
#: appPlugins/ToolNCC.py:1598 appPlugins/ToolPaint.py:1134 appPlugins/ToolPaint.py:1223
#: appPlugins/ToolPanelize.py:304 appPlugins/ToolPanelize.py:318 appPlugins/ToolSub.py:273
#: appPlugins/ToolSub.py:292 appPlugins/ToolSub.py:506 appPlugins/ToolSub.py:519
#: tclCommands/TclCommandBuffer.py:87 tclCommands/TclCommandCopperClear.py:97
#: tclCommands/TclCommandCopperClear.py:252 tclCommands/TclCommandPaint.py:100
#: tclCommands/TclCommandPaint.py:273 tclCommands/TclCommandScale.py:110
#: tclCommands/TclCommandSkew.py:164
msgid "Could not retrieve object"
msgstr ""

#: appPlugins/ToolCopperThieving.py:416
msgid "Click the end point of the filling area."
msgstr ""

#: appPlugins/ToolCopperThieving.py:543
msgid "Copper Thieving Tool started. Reading parameters."
msgstr ""

#: appPlugins/ToolCopperThieving.py:569
msgid "Copper Thieving Tool. Preparing isolation polygons."
msgstr ""

#: appPlugins/ToolCopperThieving.py:615
msgid "Copper Thieving Tool. Preparing areas to fill with copper."
msgstr ""

#: appPlugins/ToolCopperThieving.py:659
msgid "Geometry not supported for"
msgstr ""

#: appPlugins/ToolCopperThieving.py:665 appPlugins/ToolNCC.py:1884
#: appPlugins/ToolNCC.py:1932 appPlugins/ToolNCC.py:2934 appPlugins/ToolPaint.py:2623
msgid "No object available."
msgstr ""

#: appPlugins/ToolCopperThieving.py:698 appPlugins/ToolNCC.py:1902
#: appPlugins/ToolNCC.py:1955 appPlugins/ToolNCC.py:2967
msgid "The reference object type is not supported."
msgstr ""

#: appPlugins/ToolCopperThieving.py:703
msgid "Copper Thieving Tool. Appending new geometry and buffering."
msgstr ""

#: appPlugins/ToolCopperThieving.py:739
msgid "Create geometry"
msgstr ""

#: appPlugins/ToolCopperThieving.py:947 appPlugins/ToolCopperThieving.py:951
msgid "P-Plating Mask"
msgstr ""

#: appPlugins/ToolCopperThieving.py:975
msgid "Append PP-M geometry"
msgstr ""

#: appPlugins/ToolCopperThieving.py:1151
msgid "Generating Pattern Plating Mask done."
msgstr ""

#: appPlugins/ToolCopperThieving.py:1194
msgid "Copper Thieving Tool exit."
msgstr ""

#: appPlugins/ToolCopperThieving.py:1273 appPlugins/ToolCopperThieving.py:1647
#: appPlugins/ToolCutOut.py:2251 appPlugins/ToolDblSided.py:716
#: appPlugins/ToolDrilling.py:2396 appPlugins/ToolEtchCompensation.py:309
#: appPlugins/ToolExtract.py:1008 appPlugins/ToolFiducials.py:933
#: appPlugins/ToolFilm.py:1263 appPlugins/ToolFollow.py:691
#: appPlugins/ToolInvertGerber.py:216 appPlugins/ToolIsolation.py:3387
#: appPlugins/ToolLevelling.py:1755 appPlugins/ToolMarkers.py:1263
#: appPlugins/ToolMilling.py:3950 appPlugins/ToolNCC.py:4057 appPlugins/ToolOptimal.py:477
#: appPlugins/ToolPaint.py:2940 appPlugins/ToolPanelize.py:1156
#: appPlugins/ToolPunchGerber.py:2023 appPlugins/ToolQRCode.py:754
#: appPlugins/ToolSolderPaste.py:1257
msgid "Source Object"
msgstr ""

#: appPlugins/ToolCopperThieving.py:1274
msgid "Gerber Object to which will be added a copper thieving."
msgstr ""

#: appPlugins/ToolCopperThieving.py:1305
msgid ""
"This set the distance between the copper thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."
msgstr ""

#: appPlugins/ToolCopperThieving.py:1369
msgid ""
"The type of FlatCAM object to be used as copper thieving reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""

#: appPlugins/ToolCopperThieving.py:1569
msgid "Insert Copper thieving"
msgstr ""

#: appPlugins/ToolCopperThieving.py:1572
msgid ""
"Will add a polygon (may be split in multiple parts)\n"
"that will surround the actual Gerber traces at a certain distance."
msgstr ""

#: appPlugins/ToolCopperThieving.py:1628
msgid "Insert Robber Bar"
msgstr ""

#: appPlugins/ToolCopperThieving.py:1631
msgid ""
"Will add a polygon with a defined thickness\n"
"that will surround the actual Gerber object\n"
"at a certain distance.\n"
"Required when doing holes pattern plating."
msgstr ""

#: appPlugins/ToolCopperThieving.py:1649
msgid ""
"Gerber Object with the soldermask.\n"
"It will be used as a base for\n"
"the pattern plating mask."
msgstr ""

#: appPlugins/ToolCopperThieving.py:1692
msgid "Plated area"
msgstr ""

#: appPlugins/ToolCopperThieving.py:1694
msgid ""
"The area to be plated by pattern plating.\n"
"Basically is made from the openings in the plating mask.\n"
"\n"
"<<WARNING>> - the calculated area is actually a bit larger\n"
"due of the fact that the soldermask openings are by design\n"
"a bit larger than the copper pads, and this area is\n"
"calculated from the soldermask openings."
msgstr ""

#: appPlugins/ToolCopperThieving.py:1735
msgid "Generate pattern plating mask"
msgstr ""

#: appPlugins/ToolCopperThieving.py:1738
msgid ""
"Will add to the soldermask gerber geometry\n"
"the geometries of the copper thieving and/or\n"
"the robber bar if those were generated."
msgstr ""

#: appPlugins/ToolCutOut.py:411 appPlugins/ToolCutOut.py:2590
msgid "Any"
msgstr ""

#: appPlugins/ToolCutOut.py:441 appPlugins/ToolDrilling.py:1140
#: appPlugins/ToolIsolation.py:1349 appPlugins/ToolMilling.py:2075
msgid "Could not load Tools DB file."
msgstr ""

#: appPlugins/ToolCutOut.py:495 appPlugins/ToolIsolation.py:1401
#: appPlugins/ToolMilling.py:2129 appPlugins/ToolNCC.py:1257 appPlugins/ToolPaint.py:908
msgid "Tool not in Tools Database. Adding a default tool."
msgstr ""

#: appPlugins/ToolCutOut.py:502 appPlugins/ToolDrilling.py:1205
#: appPlugins/ToolIsolation.py:1407 appPlugins/ToolMilling.py:2137
#: appPlugins/ToolNCC.py:1264 appPlugins/ToolPaint.py:916
msgid ""
"Cancelled.\n"
"Multiple tools for one tool diameter found in Tools Database."
msgstr ""

#: appPlugins/ToolCutOut.py:521
msgid "Updated tool from Tools Database."
msgstr ""

#: appPlugins/ToolCutOut.py:547
msgid "Default tool added."
msgstr ""

#: appPlugins/ToolCutOut.py:583
msgid "Tool updated from Tools Database."
msgstr ""

#: appPlugins/ToolCutOut.py:647 appPlugins/ToolCutOut.py:1416
msgid ""
"There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""

#: appPlugins/ToolCutOut.py:653 appPlugins/ToolCutOut.py:1033 appPlugins/ToolCutOut.py:1519
#: tclCommands/TclCommandGeoCutout.py:181
msgid "Tool Diameter is zero value. Change it to a positive real number."
msgstr ""

#: appPlugins/ToolCutOut.py:666 appPlugins/ToolCutOut.py:1047
msgid "Number of gaps value is missing. Add it and retry."
msgstr ""

#: appPlugins/ToolCutOut.py:671 appPlugins/ToolCutOut.py:1051
msgid ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8.\n"
"Fill in a correct value and retry."
msgstr ""

#: appPlugins/ToolCutOut.py:899 appPlugins/ToolCutOut.py:1305 appPlugins/ToolCutOut.py:1871
msgid "Mouse bites failed."
msgstr ""

#: appPlugins/ToolCutOut.py:909 tclCommands/TclCommandGeoCutout.py:295
msgid "Any-form Cutout operation finished."
msgstr ""

#: appPlugins/ToolCutOut.py:1027 appPlugins/ToolDrilling.py:1942
#: appPlugins/ToolEtchCompensation.py:187 appPlugins/ToolFollow.py:198
#: appPlugins/ToolFollow.py:248 appPlugins/ToolInvertGerber.py:136
#: appPlugins/ToolIsolation.py:1166 appPlugins/ToolIsolation.py:1230
#: appPlugins/ToolIsolation.py:1598 appPlugins/ToolIsolation.py:1627
#: appPlugins/ToolIsolation.py:2608 appPlugins/ToolMilling.py:2719
#: appPlugins/ToolMilling.py:2742 appPlugins/ToolMilling.py:2907 appPlugins/ToolNCC.py:1003
#: appPlugins/ToolNCC.py:1072 appPlugins/ToolNCC.py:1517 appPlugins/ToolPaint.py:1138
#: appPlugins/ToolPanelize.py:309 tclCommands/TclCommandBbox.py:71
#: tclCommands/TclCommandNregions.py:71
msgid "Object not found"
msgstr ""

#: appPlugins/ToolCutOut.py:1153 appPlugins/ToolCutOut.py:1227
msgid "Rectangular cutout with negative margin is not possible."
msgstr ""

#: appPlugins/ToolCutOut.py:1314
msgid "Rectangular CutOut operation finished."
msgstr ""

#: appPlugins/ToolCutOut.py:1429 appPlugins/ToolCutOut.py:1447 appPlugins/ToolCutOut.py:1461
msgid "Could not add drills."
msgstr ""

#: appPlugins/ToolCutOut.py:1508 appPlugins/ToolCutOut.py:1578
msgid "Geometry object for manual cutout not found"
msgstr ""

#: appPlugins/ToolCutOut.py:1511
msgid "Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""

#: appPlugins/ToolCutOut.py:1617
msgid "No tool in the Geometry object."
msgstr ""

#: appPlugins/ToolCutOut.py:1638
msgid "Added manual Bridge Gap. Left click to add another or right click to finish."
msgstr ""

#: appPlugins/ToolCutOut.py:1655
msgid ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""

#: appPlugins/ToolCutOut.py:1661
msgid ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""

#: appPlugins/ToolCutOut.py:1707
msgid "Geometry not supported"
msgstr ""

#: appPlugins/ToolCutOut.py:1784
msgid "Making manual bridge gap..."
msgstr ""

#: appPlugins/ToolCutOut.py:1876
msgid "Finished manual adding of gaps."
msgstr ""

#: appPlugins/ToolCutOut.py:2233
msgid ""
"Create a Geometry object with toolpaths\n"
"for cutting out the object from the surrounding material."
msgstr ""

#: appPlugins/ToolCutOut.py:2252
msgid "Object to be cutout"
msgstr ""

#: appPlugins/ToolCutOut.py:2288
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""

#: appPlugins/ToolCutOut.py:2305
msgid "Cutout Tool"
msgstr ""

#: appPlugins/ToolCutOut.py:2334 appPlugins/ToolIsolation.py:202
#: appPlugins/ToolIsolation.py:3513 appPlugins/ToolMilling.py:4214
#: appPlugins/ToolNCC.py:4229 appPlugins/ToolPaint.py:3091
msgid "Search and Add"
msgstr ""

#: appPlugins/ToolCutOut.py:2337 appPlugins/ToolIsolation.py:3516
#: appPlugins/ToolMilling.py:4217 appPlugins/ToolNCC.py:4232 appPlugins/ToolPaint.py:3094
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above.\n"
"This is done by a background search\n"
"in the Tools Database. If nothing is found\n"
"in the Tools DB then a default tool is added."
msgstr ""

#: appPlugins/ToolCutOut.py:2346 appPlugins/ToolIsolation.py:207
#: appPlugins/ToolIsolation.py:3525 appPlugins/ToolMilling.py:399
#: appPlugins/ToolMilling.py:4226 appPlugins/ToolNCC.py:4241 appPlugins/ToolPaint.py:3103
msgid "Pick from DB"
msgstr ""

#: appPlugins/ToolCutOut.py:2349 appPlugins/ToolIsolation.py:3528
#: appPlugins/ToolMilling.py:4229 appPlugins/ToolNCC.py:4244 appPlugins/ToolPaint.py:3106
msgid ""
"Add a new tool to the Tool Table\n"
"from the Tools Database.\n"
"Tools database administration in in:\n"
"Menu: Options -> Tools Database"
msgstr ""

#: appPlugins/ToolCutOut.py:2542
msgid "Selection of the type of cutout."
msgstr ""

#: appPlugins/ToolCutOut.py:2546 appPlugins/ToolPunchGerber.py:2332
msgid "Automatic"
msgstr ""

#: appPlugins/ToolCutOut.py:2587
msgid ""
"Checked: the cutout shape is rectangular.\n"
"Unchecked: any-form cutout shape."
msgstr ""

#: appPlugins/ToolCutOut.py:2627
msgid "Manual cutout Geometry"
msgstr ""

#: appPlugins/ToolCutOut.py:2629 appPlugins/ToolCutOut.py:2701
msgid "Geometry object used to create the manual cutout."
msgstr ""

#: appPlugins/ToolCutOut.py:2644
msgid "Manual Geometry"
msgstr ""

#: appPlugins/ToolCutOut.py:2647
msgid "Generate a Geometry to be used as cutout."
msgstr ""

#: appPlugins/ToolCutOut.py:2662
msgid ""
"Add new gaps on the selected Geometry object\n"
"by clicking mouse left button on the Geometry outline."
msgstr ""

#: appPlugins/ToolCutOut.py:2672
msgid "Generate the cutout geometry."
msgstr ""

#: appPlugins/ToolDblSided.py:292
msgid "'Point' reference is selected and 'Point' coordinates are missing."
msgstr ""

#: appPlugins/ToolDblSided.py:301
msgid "Box reference object is missing."
msgstr ""

#: appPlugins/ToolDblSided.py:309
msgid "Not supported."
msgstr ""

#: appPlugins/ToolDblSided.py:315
msgid "Drill diameter is missing."
msgstr ""

#: appPlugins/ToolDblSided.py:322
msgid "Alignment drill coordinates are missing."
msgstr ""

#: appPlugins/ToolDblSided.py:357
msgid "Alignment Drills"
msgstr ""

#: appPlugins/ToolDblSided.py:361
msgid "Excellon object with alignment drills created..."
msgstr ""

#: appPlugins/ToolDblSided.py:372 appPlugins/ToolPunchGerber.py:564
#: appPlugins/ToolPunchGerber.py:602 appPlugins/ToolPunchGerber.py:707
msgid "There is no Excellon object loaded ..."
msgstr ""

#: appPlugins/ToolDblSided.py:388
msgid "Click on canvas within the desired Excellon drill hole"
msgstr ""

#: appPlugins/ToolDblSided.py:432
msgid "Mirror reference point set."
msgstr ""

#: appPlugins/ToolDblSided.py:502
msgid "Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr ""

#: appPlugins/ToolDblSided.py:514
msgid "There is no Box object loaded ..."
msgstr ""

#: appPlugins/ToolDblSided.py:524
msgid "There are no Point coordinates in the Point field. Add coords and try again ..."
msgstr ""

#: appPlugins/ToolDblSided.py:531 camlib.py:2462
msgid "Object was mirrored"
msgstr ""

#: appPlugins/ToolDblSided.py:694 appPlugins/ToolNCC.py:4035
msgid ""
"Create a Geometry object with\n"
"toolpaths to cover the space outside the copper pattern."
msgstr ""

#: appPlugins/ToolDblSided.py:717
msgid "Objects to be mirrored"
msgstr ""

#: appPlugins/ToolDblSided.py:730
msgid "Select the type of application object to be processed in this tool."
msgstr ""

#: appPlugins/ToolDblSided.py:749
msgid "Bounds Values"
msgstr ""

#: appPlugins/ToolDblSided.py:751
msgid ""
"Select on canvas the object(s)\n"
"for which to calculate bounds values."
msgstr ""

#: appPlugins/ToolDblSided.py:767
msgid "X min"
msgstr ""

#: appPlugins/ToolDblSided.py:769 appPlugins/ToolDblSided.py:783
msgid "Minimum location."
msgstr ""

#: appPlugins/ToolDblSided.py:781
msgid "Y min"
msgstr ""

#: appPlugins/ToolDblSided.py:795
msgid "X max"
msgstr ""

#: appPlugins/ToolDblSided.py:797 appPlugins/ToolDblSided.py:811
msgid "Maximum location."
msgstr ""

#: appPlugins/ToolDblSided.py:809
msgid "Y max"
msgstr ""

#: appPlugins/ToolDblSided.py:820
msgid "Center point coordinates"
msgstr ""

#: appPlugins/ToolDblSided.py:822
msgid "Centroid"
msgstr ""

#: appPlugins/ToolDblSided.py:824
msgid ""
"The center point location for the rectangular\n"
"bounding shape. Centroid. Format is (x, y)."
msgstr ""

#: appPlugins/ToolDblSided.py:833
msgid "Calculate Bounds Values"
msgstr ""

#: appPlugins/ToolDblSided.py:835
msgid ""
"Calculate the enveloping rectangular shape coordinates,\n"
"for the selection of objects.\n"
"The envelope shape is parallel with the X, Y axis."
msgstr ""

#: appPlugins/ToolDblSided.py:845
msgid "Parameters for the mirror operation"
msgstr ""

#: appPlugins/ToolDblSided.py:908
msgid "Point coordinates"
msgstr ""

#: appPlugins/ToolDblSided.py:920
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring axis\n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coordinates manually."
msgstr ""

#: appPlugins/ToolDblSided.py:945
msgid ""
"It can be of type: Gerber or Excellon or Geometry.\n"
"The coordinates of the center of the bounding box are used\n"
"as reference for mirror operation."
msgstr ""

#: appPlugins/ToolDblSided.py:972
msgid "Object that holds holes that can be picked as reference for mirroring."
msgstr ""

#: appPlugins/ToolDblSided.py:984
msgid "Pick hole"
msgstr ""

#: appPlugins/ToolDblSided.py:986
msgid ""
"Click inside a drill hole that belong to the selected Excellon object,\n"
"and the hole center coordinates will be copied to the Point field."
msgstr ""

#: appPlugins/ToolDblSided.py:998
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""

#: appPlugins/ToolDblSided.py:1010 appPlugins/ToolDblSided.py:1112
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""

#: appPlugins/ToolDblSided.py:1061 appPlugins/ToolDblSided.py:1068
msgid ""
"The reference point used to create the second alignment drill\n"
"from the first alignment drill, by doing mirror.\n"
"It can be modified in the Mirror Parameters -> Reference section"
msgstr ""

#: appPlugins/ToolDblSided.py:1078
msgid "Drill Coordinates"
msgstr ""

#: appPlugins/ToolDblSided.py:1080
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... \n"
"If the type is X or Y then for each pair of coordinates\n"
"two drill points will be added: one with the given coordinates,\n"
"and the other will be mirrored as set in the 'Mirror' section.\n"
"If the type is 'Manual' then no mirror point is generated.\n"
"\n"
"Shift + mouse click will add one set of coordinates.\n"
"Ctrl + Shift + mouse click will accumulate sets of coordinates. "
msgstr ""

#: appPlugins/ToolDblSided.py:1093
msgid "Drill coordinates"
msgstr ""

#: appPlugins/ToolDblSided.py:1098
msgid "Delete the last coordinates tuple in the list."
msgstr ""

#: appPlugins/ToolDblSided.py:1109 appPlugins/ToolMarkers.py:1516
#: appPlugins/ToolMarkers.py:1530
msgid "Create Excellon Object"
msgstr ""

#: appPlugins/ToolDistance.py:263
msgid "MEASURING: Click on the Start point ..."
msgstr ""

#: appPlugins/ToolDistance.py:353 appPlugins/ToolDistance.py:987
#: appPlugins/ToolObjectDistance.py:600
msgid "Measure"
msgstr ""

#: appPlugins/ToolDistance.py:425
msgid "Click to add next point or right click to finish."
msgstr ""

#: appPlugins/ToolDistance.py:472
msgid "Pads overlapped. Aborting."
msgstr ""

#: appPlugins/ToolDistance.py:841
msgid "Snap to center"
msgstr ""

#: appPlugins/ToolDistance.py:843
msgid ""
"Mouse cursor will snap to the center of the pad/drill\n"
"when it is hovering over the geometry of the pad/drill."
msgstr ""

#: appPlugins/ToolDistance.py:848
msgid "Multi-Point"
msgstr ""

#: appPlugins/ToolDistance.py:850
msgid "Make a measurement over multiple distance segments."
msgstr ""

#: appPlugins/ToolDistance.py:857 appPlugins/ToolFiducials.py:1168
#: appPlugins/ToolMarkers.py:1464
msgid "Use a big cursor."
msgstr ""

#: appPlugins/ToolDistance.py:878 appPlugins/ToolObjectDistance.py:491
msgid "Start point"
msgstr ""

#: appPlugins/ToolDistance.py:879 appPlugins/ToolDistance.py:884
#: appPlugins/ToolObjectDistance.py:492 appPlugins/ToolObjectDistance.py:497
msgid "This is measuring Start point coordinates."
msgstr ""

#: appPlugins/ToolDistance.py:891 appPlugins/ToolObjectDistance.py:504
msgid "End point"
msgstr ""

#: appPlugins/ToolDistance.py:892 appPlugins/ToolDistance.py:897
#: appPlugins/ToolObjectDistance.py:505 appPlugins/ToolObjectDistance.py:510
msgid "This is the measuring Stop point coordinates."
msgstr ""

#: appPlugins/ToolDistance.py:906 appPlugins/ToolObjectDistance.py:519
msgid "Results"
msgstr ""

#: appPlugins/ToolDistance.py:916 appPlugins/ToolObjectDistance.py:529
msgid "Dx"
msgstr ""

#: appPlugins/ToolDistance.py:917 appPlugins/ToolDistance.py:922
#: appPlugins/ToolObjectDistance.py:530 appPlugins/ToolObjectDistance.py:535
msgid "This is the distance measured over the X axis."
msgstr ""

#: appPlugins/ToolDistance.py:929 appPlugins/ToolObjectDistance.py:542
msgid "Dy"
msgstr ""

#: appPlugins/ToolDistance.py:930 appPlugins/ToolDistance.py:935
#: appPlugins/ToolObjectDistance.py:543 appPlugins/ToolObjectDistance.py:548
msgid "This is the distance measured over the Y axis."
msgstr ""

#: appPlugins/ToolDistance.py:943 appPlugins/ToolDistance.py:948
#: appPlugins/ToolDistance.py:956 appPlugins/ToolDistance.py:961
#: appPlugins/ToolObjectDistance.py:556 appPlugins/ToolObjectDistance.py:561
msgid "This is orientation angle of the measuring line."
msgstr ""

#: appPlugins/ToolDistance.py:973 appPlugins/ToolObjectDistance.py:573
msgid "DISTANCE"
msgstr ""

#: appPlugins/ToolDistance.py:974 appPlugins/ToolDistance.py:980
#: appPlugins/ToolObjectDistance.py:574 appPlugins/ToolObjectDistance.py:580
msgid "This is the point to point Euclidian distance."
msgstr ""

#: appPlugins/ToolDrilling.py:287 appPlugins/ToolMilling.py:413
msgid "coords"
msgstr ""

#: appPlugins/ToolDrilling.py:902 appPlugins/ToolDrilling.py:908
#: appPlugins/ToolDrilling.py:953 appPlugins/ToolDrilling.py:1233
#: appPlugins/ToolDrilling.py:1240 appPlugins/ToolDrilling.py:1272
#: appPlugins/ToolDrilling.py:1285 appPlugins/ToolDrilling.py:1289
#: appPlugins/ToolDrilling.py:2486 appPlugins/ToolIsolation.py:648
#: appPlugins/ToolIsolation.py:842 appPlugins/ToolIsolation.py:847
#: appPlugins/ToolIsolation.py:877 appPlugins/ToolIsolation.py:902
#: appPlugins/ToolIsolation.py:915 appPlugins/ToolIsolation.py:3551
#: appPlugins/ToolMilling.py:968 appPlugins/ToolMilling.py:1087
#: appPlugins/ToolMilling.py:1648 appPlugins/ToolMilling.py:1656
#: appPlugins/ToolMilling.py:1660 appPlugins/ToolMilling.py:1717
#: appPlugins/ToolMilling.py:1729 appPlugins/ToolMilling.py:1733
#: appPlugins/ToolMilling.py:4254 appPlugins/ToolNCC.py:534 appPlugins/ToolNCC.py:539
#: appPlugins/ToolNCC.py:569 appPlugins/ToolNCC.py:592 appPlugins/ToolNCC.py:605
#: appPlugins/ToolNCC.py:821 appPlugins/ToolNCC.py:4266 appPlugins/ToolPaint.py:493
#: appPlugins/ToolPaint.py:498 appPlugins/ToolPaint.py:547 appPlugins/ToolPaint.py:569
#: appPlugins/ToolPaint.py:581 appPlugins/ToolPaint.py:798 appPlugins/ToolPaint.py:3128
msgid "Parameters for"
msgstr ""

#: appPlugins/ToolDrilling.py:902 appPlugins/ToolDrilling.py:1240
#: appPlugins/ToolDrilling.py:1289 appPlugins/ToolIsolation.py:648
#: appPlugins/ToolIsolation.py:847 appPlugins/ToolIsolation.py:915
#: appPlugins/ToolMilling.py:968 appPlugins/ToolMilling.py:1087
#: appPlugins/ToolMilling.py:1660 appPlugins/ToolMilling.py:1733 appPlugins/ToolNCC.py:539
#: appPlugins/ToolNCC.py:605 appPlugins/ToolNCC.py:821 appPlugins/ToolPaint.py:498
#: appPlugins/ToolPaint.py:581 appPlugins/ToolPaint.py:798
msgid "Multiple Tools"
msgstr ""

#: appPlugins/ToolDrilling.py:1451 appPlugins/ToolIsolation.py:983
#: appPlugins/ToolMilling.py:2030 appPlugins/ToolNCC.py:712 appPlugins/ToolPaint.py:646
msgid "Current Tool parameters were applied to all tools."
msgstr ""

#: appPlugins/ToolDrilling.py:1513 appPlugins/ToolMilling.py:3555
msgid "Focus Z"
msgstr ""

#: appPlugins/ToolDrilling.py:1535 appPlugins/ToolMilling.py:3577
msgid "Laser Power"
msgstr ""

#: appPlugins/ToolDrilling.py:1537 appPlugins/ToolMilling.py:3579
msgid "The laser power when the laser is cutting."
msgstr ""

#: appPlugins/ToolDrilling.py:1656 appPlugins/ToolMilling.py:3742
msgid "Delete failed. There are no exclusion areas to delete."
msgstr ""

#: appPlugins/ToolDrilling.py:1673 appPlugins/ToolMilling.py:3759
msgid "Delete failed. Nothing is selected."
msgstr ""

#: appPlugins/ToolDrilling.py:1690 appPlugins/ToolMilling.py:3776
msgid "Only one selected row is allowed."
msgstr ""

#: appPlugins/ToolDrilling.py:1791 appPlugins/ToolDrilling.py:1806
#: appPlugins/ToolMilling.py:3877 appPlugins/ToolMilling.py:3892
msgid "Value edited in Exclusion Table."
msgstr ""

#: appPlugins/ToolDrilling.py:1960 camlib.py:4291
msgid "The loaded Excellon file has no drills"
msgstr ""

#: appPlugins/ToolDrilling.py:2006 camlib.py:4211
msgid "Creating a list of points to drill..."
msgstr ""

#: appPlugins/ToolDrilling.py:2013
msgid "Drill points inside the exclusion zones."
msgstr ""

#: appPlugins/ToolDrilling.py:2029 camlib.py:4281 camlib.py:5729 camlib.py:6168
msgid "Starting G-Code"
msgstr ""

#: appPlugins/ToolDrilling.py:2034
msgid "Generating CNCJob..."
msgstr ""

#: appPlugins/ToolDrilling.py:2185 camlib.py:3363 camlib.py:3850 camlib.py:6025
msgid "The Toolchange X,Y format has to be (x, y)."
msgstr ""

#: appPlugins/ToolDrilling.py:2336
msgid "Generating CNC Code"
msgstr ""

#: appPlugins/ToolDrilling.py:2398 appPlugins/ToolFilm.py:1265
msgid "Excellon object for drilling/milling operation."
msgstr ""

#: appPlugins/ToolDrilling.py:2426
msgid "Tools in the object used for drilling."
msgstr ""

#: appPlugins/ToolDrilling.py:2473
msgid "Search DB"
msgstr ""

#: appPlugins/ToolDrilling.py:2476
msgid ""
"Will search and try to replace the tools from Tools Table\n"
"with tools from DB that have a close diameter value."
msgstr ""

#: appPlugins/ToolDrilling.py:2489 appPlugins/ToolIsolation.py:3554
#: appPlugins/ToolMilling.py:4257 appPlugins/ToolNCC.py:4268 appPlugins/ToolPaint.py:3131
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""

#: appPlugins/ToolDrilling.py:2728 appPlugins/ToolIsolation.py:3754
#: appPlugins/ToolMilling.py:4754 appPlugins/ToolNCC.py:4428 appPlugins/ToolPaint.py:3225
msgid "Apply parameters to all tools"
msgstr ""

#: appPlugins/ToolDrilling.py:2731 appPlugins/ToolIsolation.py:3757
#: appPlugins/ToolMilling.py:4757 appPlugins/ToolNCC.py:4431 appPlugins/ToolPaint.py:3228
msgid ""
"The parameters in the current form will be applied\n"
"on all the tools from the Tool Table."
msgstr ""

#: appPlugins/ToolDrilling.py:2753 appPlugins/ToolMilling.py:4779
msgid "Tool change Z"
msgstr ""

#: appPlugins/ToolDrilling.py:2829 appPlugins/ToolMilling.py:4842
msgid "X,Y coordinates"
msgstr ""

#: appPlugins/ToolDrilling.py:2875
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Excellon Objects."
msgstr ""

#: appPlugins/ToolDrilling.py:2890 appPlugins/ToolMilling.py:4949
msgid "Add exclusion areas"
msgstr ""

#: appPlugins/ToolDrilling.py:2917 appPlugins/ToolMilling.py:4977
msgid "This is the Area ID."
msgstr ""

#: appPlugins/ToolDrilling.py:2919 appPlugins/ToolMilling.py:4979
msgid "Type of the object where the exclusion area was added."
msgstr ""

#: appPlugins/ToolDrilling.py:2921 appPlugins/ToolMilling.py:4981
msgid "The strategy used for exclusion area. Go around the exclusion areas or over it."
msgstr ""

#: appPlugins/ToolDrilling.py:2923 appPlugins/ToolMilling.py:4983
msgid ""
"If the strategy is to go over the area then this is the height at which the tool will go "
"to avoid the exclusion area."
msgstr ""

#: appPlugins/ToolDrilling.py:2957 appPlugins/ToolMilling.py:5017
msgid "Add Area:"
msgstr ""

#: appPlugins/ToolDrilling.py:2958 appPlugins/ToolMilling.py:5018
msgid "Add an Exclusion Area."
msgstr ""

#: appPlugins/ToolDrilling.py:2976 appPlugins/ToolMilling.py:5036
msgid "Delete all exclusion areas."
msgstr ""

#: appPlugins/ToolDrilling.py:2979 appPlugins/ToolMilling.py:5039
msgid "Delete Selected"
msgstr ""

#: appPlugins/ToolDrilling.py:2980 appPlugins/ToolMilling.py:5040
msgid "Delete all exclusion areas that are selected in the table."
msgstr ""

#: appPlugins/ToolDrilling.py:2996 appPlugins/ToolMilling.py:5055
msgid "Generate CNCJob object"
msgstr ""

#: appPlugins/ToolDrilling.py:2999 appPlugins/ToolMilling.py:5058
msgid ""
"Generate the CNC Job.\n"
"If milling then an additional Geometry object will be created.\n"
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""

#: appPlugins/ToolEtchCompensation.py:90 appPlugins/ToolEtchCompensation.py:288
msgid "Etch Compensation"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:193 appPlugins/ToolEtchCompensation.py:207
msgid "Missing parameter value."
msgstr ""

#: appPlugins/ToolEtchCompensation.py:311
msgid "Gerber object that will be compensated."
msgstr ""

#: appPlugins/ToolEtchCompensation.py:328
msgid "Conversion utilities"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:339
msgid "Oz to Microns"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:341
msgid ""
"Will convert from oz thickness to microns [um].\n"
"Can use formulas with operators: /, *, +, -, %, .\n"
"The real numbers use the dot decimals separator."
msgstr ""

#: appPlugins/ToolEtchCompensation.py:350
msgid "Oz value"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:352 appPlugins/ToolEtchCompensation.py:374
msgid "Microns value"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:361
msgid "Mils to Microns"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:363
msgid ""
"Will convert from mils to microns [um].\n"
"Can use formulas with operators: /, *, +, -, %, .\n"
"The real numbers use the dot decimals separator."
msgstr ""

#: appPlugins/ToolEtchCompensation.py:372
msgid "Mils value"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:396
msgid "Copper Thickness"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:398
msgid ""
"The thickness of the copper foil.\n"
"In microns [um]."
msgstr ""

#: appPlugins/ToolEtchCompensation.py:408 appPlugins/ToolImage.py:825
msgid "Ratio"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:410
msgid ""
"The ratio of lateral etch versus depth etch.\n"
"Can be:\n"
"- custom -> the user will enter a custom value\n"
"- preselection -> value which depends on a selection of etchants"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:416 appPlugins/ToolEtchCompensation.py:441
msgid "Etch Factor"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:417
msgid "Etchants list"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:418
msgid "Manual offset"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:430
msgid "Etchants"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:432
msgid "A list of etchants."
msgstr ""

#: appPlugins/ToolEtchCompensation.py:435
msgid "Alkaline baths"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:443
msgid ""
"The ratio between depth etch and lateral etch .\n"
"Accepts real numbers and formulas using the operators: /,*,+,-,%"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:447
msgid "Real number or formula"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:455
msgid ""
"Value with which to increase or decrease (buffer)\n"
"the copper features. In microns [um]."
msgstr ""

#: appPlugins/ToolEtchCompensation.py:476
msgid "Compensate"
msgstr ""

#: appPlugins/ToolEtchCompensation.py:479
msgid "Will increase the copper features thickness to compensate the lateral etch."
msgstr ""

#: appPlugins/ToolExtract.py:410
msgid "extracted"
msgstr ""

#: appPlugins/ToolExtract.py:488 appPlugins/ToolExtract.py:593 appPlugins/ToolExtract.py:693
msgid "No drills extracted. Try different parameters."
msgstr ""

#: appPlugins/ToolExtract.py:790
msgid "No soldermask extracted."
msgstr ""

#: appPlugins/ToolExtract.py:839 appPlugins/ToolExtract.py:848 appPlugins/ToolExtract.py:852
msgid "No cutout extracted."
msgstr ""

#: appPlugins/ToolExtract.py:1009
msgid "Gerber object from which to extract drill holes or soldermask."
msgstr ""

#: appPlugins/ToolExtract.py:1051 appPlugins/ToolPunchGerber.py:2064
msgid "Process all Pads."
msgstr ""

#: appPlugins/ToolExtract.py:1129 appPlugins/ToolExtract.py:1317
msgid "Extract Drills"
msgstr ""

#: appPlugins/ToolExtract.py:1131
msgid "Extract an Excellon object from the Gerber pads."
msgstr ""

#: appPlugins/ToolExtract.py:1320
msgid "Extract drills from a given Gerber file."
msgstr ""

#: appPlugins/ToolFiducials.py:357
msgid "Click to add first Fiducial. Bottom Left..."
msgstr ""

#: appPlugins/ToolFiducials.py:665
msgid "Click to add the last fiducial. Top Right..."
msgstr ""

#: appPlugins/ToolFiducials.py:670
msgid "Click to add the second fiducial. Top Left or Bottom Right..."
msgstr ""

#: appPlugins/ToolFiducials.py:829
msgid "Fiducials Tool exit."
msgstr ""

#: appPlugins/ToolFiducials.py:935
msgid "Gerber object for adding fiducials and soldermask openings."
msgstr ""

#: appPlugins/ToolFiducials.py:952
msgid ""
"A table with the fiducial points coordinates,\n"
"in the format (x, y)."
msgstr ""

#: appPlugins/ToolFiducials.py:990 appPlugins/ToolMarkers.py:1416
msgid "Top Right"
msgstr ""

#: appPlugins/ToolFiducials.py:1124
msgid "Thickness of the line that makes the fiducial."
msgstr ""

#: appPlugins/ToolFiducials.py:1157
msgid "Mode:"
msgstr ""

#: appPlugins/ToolFiducials.py:1174
msgid "Add Fiducial"
msgstr ""

#: appPlugins/ToolFiducials.py:1177
msgid "Will add a polygon on the copper layer to serve as fiducial."
msgstr ""

#: appPlugins/ToolFiducials.py:1182
msgid "Add Soldermask Opening"
msgstr ""

#: appPlugins/ToolFiducials.py:1184
msgid ""
"Will add a polygon on the soldermask layer\n"
"to serve as fiducial opening.\n"
"The diameter is always double of the diameter\n"
"for the copper fiducial."
msgstr ""

#: appPlugins/ToolFilm.py:302
msgid "Load an object for Film and retry."
msgstr ""

#: appPlugins/ToolFilm.py:309
msgid "Load an object for Box and retry."
msgstr ""

#: appPlugins/ToolFilm.py:324
msgid "Generating Film ..."
msgstr ""

#: appPlugins/ToolFilm.py:387 appPlugins/ToolFilm.py:392
msgid "Export positive film"
msgstr ""

#: appPlugins/ToolFilm.py:424
msgid "No Excellon object selected. Load an object for punching reference and retry."
msgstr ""

#: appPlugins/ToolFilm.py:448 appPlugins/ToolFilm.py:460 appPlugins/ToolPunchGerber.py:826
#: appPlugins/ToolPunchGerber.py:959
msgid "Failed. Punch hole size is bigger than some of the apertures in the Gerber object."
msgstr ""

#: appPlugins/ToolFilm.py:478 appPlugins/ToolPunchGerber.py:899
#: appPlugins/ToolPunchGerber.py:994
msgid ""
"Failed. The new object geometry is the same as the one in the source object geometry..."
msgstr ""

#: appPlugins/ToolFilm.py:550 appPlugins/ToolFilm.py:555
msgid "Export negative film"
msgstr ""

#: appPlugins/ToolFilm.py:632 appPlugins/ToolFilm.py:854 appPlugins/ToolPanelize.py:322
msgid "No object Box. Using instead"
msgstr ""

#: appPlugins/ToolFilm.py:688 appPlugins/ToolFilm.py:911
msgid "Film file exported to"
msgstr ""

#: appPlugins/ToolFilm.py:1020
msgid ""
"The artwork has to be within the selected page size in order to be visible.\n"
"For 'Bounds' page size, it needs to be in the first quadrant."
msgstr ""

#: appPlugins/ToolFilm.py:1281
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""

#: appPlugins/ToolFilm.py:1304
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide the type of "
"objects that will be\n"
"in the Box Object combobox."
msgstr ""

#: appPlugins/ToolFilm.py:1422
msgid ""
"'Length' -> deform by a length value\n"
"'Angle' -> deform by an angle\n"
"'Ratio' -> deform by a ratio between what should be and what is"
msgstr ""

#: appPlugins/ToolFilm.py:1592
msgid "Punch drill holes"
msgstr ""

#: appPlugins/ToolFilm.py:1593
msgid ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."
msgstr ""

#: appPlugins/ToolFilm.py:1609
msgid "Source"
msgstr ""

#: appPlugins/ToolFilm.py:1611
msgid ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."
msgstr ""

#: appPlugins/ToolFilm.py:1616
msgid "Pad center"
msgstr ""

#: appPlugins/ToolFilm.py:1623
msgid "Remove the geometry of Excellon from the Film to create the holes in pads."
msgstr ""

#: appPlugins/ToolFilm.py:1634
msgid "Punch Size"
msgstr ""

#: appPlugins/ToolFilm.py:1635
msgid "The value here will control how big is the punch hole in the pads."
msgstr ""

#: appPlugins/ToolFilm.py:1774
msgid "Save Film"
msgstr ""

#: appPlugins/ToolFilm.py:1777
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in the\n"
"selected format."
msgstr ""

#: appPlugins/ToolFilm.py:1845
msgid ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object has pads."
msgstr ""

#: appPlugins/ToolFollow.py:320 appPlugins/ToolFollow.py:388
msgid "Failed to create Follow Geometry."
msgstr ""

#: appPlugins/ToolFollow.py:670
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut through the middle of polygons."
msgstr ""

#: appPlugins/ToolFollow.py:693
msgid ""
"A Gerber object to be followed.\n"
"Create a Geometry object with a path\n"
"following the Gerber traces."
msgstr ""

#: appPlugins/ToolFollow.py:722
msgid ""
"Selection of area to be processed.\n"
"- 'All Polygons' - the process will start after click.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be processed."
msgstr ""

#: appPlugins/ToolImage.py:91 appPlugins/ToolImage.py:511
msgid "Image Import"
msgstr ""

#: appPlugins/ToolImage.py:161
msgid "Import warning"
msgstr ""

#: appPlugins/ToolImage.py:162
msgid ""
"The tracing require Chromium,\n"
"but it was not detected.\n"
"\n"
"Do you want to download it (about 300MB)?"
msgstr ""

#: appPlugins/ToolImage.py:182
msgid ""
"Please be patient. Chromium is being downloaded in the background.\n"
"The app will resume after it is installed."
msgstr ""

#: appPlugins/ToolImage.py:191 appPlugins/ToolImage.py:194
msgid "Import IMAGE"
msgstr ""

#: appPlugins/ToolImage.py:257
msgid "Only Geometry and Gerber objects are supported"
msgstr ""

#: appPlugins/ToolImage.py:535 appPlugins/ToolReport.py:192
msgid "Object Type"
msgstr ""

#: appPlugins/ToolImage.py:537
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""

#: appPlugins/ToolImage.py:553
msgid "DPI value"
msgstr ""

#: appPlugins/ToolImage.py:554
msgid "Specify a DPI value for the image."
msgstr ""

#: appPlugins/ToolImage.py:559
msgid "Area:"
msgstr ""

#: appPlugins/ToolImage.py:561
msgid "Polygons inside the image with less area are discarded."
msgstr ""

#: appPlugins/ToolImage.py:577 appPlugins/ToolImage.py:595
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""

#: appPlugins/ToolImage.py:615
msgid "Level of detail"
msgstr ""

#: appPlugins/ToolImage.py:622 appPlugins/ToolImage.py:638 appPlugins/ToolImage.py:652
#: appPlugins/ToolImage.py:666
msgid "Mask value"
msgstr ""

#: appPlugins/ToolImage.py:624
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""

#: appPlugins/ToolImage.py:640
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""

#: appPlugins/ToolImage.py:654
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""

#: appPlugins/ToolImage.py:668
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""

#: appPlugins/ToolImage.py:687 appPlugins/ToolLevelling.py:1125
#: appPlugins/ToolLevelling.py:1147 appPlugins/ToolLevelling.py:2003
#: appPlugins/ToolLevelling.py:2018
msgid "Control"
msgstr ""

#: appPlugins/ToolImage.py:689
msgid "Tracing control."
msgstr ""

#: appPlugins/ToolImage.py:693 appPlugins/ToolImage.py:712
msgid "Presets"
msgstr ""

#: appPlugins/ToolImage.py:714
msgid "Options presets to control the tracing."
msgstr ""

#: appPlugins/ToolImage.py:738
msgid "Error Threshold"
msgstr ""

#: appPlugins/ToolImage.py:740
msgid "Error threshold for straight lines and quadratic splines."
msgstr ""

#: appPlugins/ToolImage.py:755
msgid "Splines"
msgstr ""

#: appPlugins/ToolImage.py:765
msgid "Enhance R Angle"
msgstr ""

#: appPlugins/ToolImage.py:767
msgid "Enhance right angle corners."
msgstr ""

#: appPlugins/ToolImage.py:777
msgid "Noise Reduction"
msgstr ""

#: appPlugins/ToolImage.py:781
msgid "Path Omit"
msgstr ""

#: appPlugins/ToolImage.py:783
msgid "Edge node paths shorter than this will be discarded for noise reduction."
msgstr ""

#: appPlugins/ToolImage.py:793
msgid "Line Filter"
msgstr ""

#: appPlugins/ToolImage.py:806
msgid "Sampling"
msgstr ""

#: appPlugins/ToolImage.py:808
msgid "Palette"
msgstr ""

#: appPlugins/ToolImage.py:808
msgid "Random"
msgstr ""

#: appPlugins/ToolImage.py:808
msgid "Deterministic"
msgstr ""

#: appPlugins/ToolImage.py:815
msgid "Number of colors to use on palette."
msgstr ""

#: appPlugins/ToolImage.py:827
msgid ""
"Color quantization will randomize a color if fewer pixels than (total pixels * ratio) has "
"it."
msgstr ""

#: appPlugins/ToolImage.py:837
msgid "Cycles"
msgstr ""

#: appPlugins/ToolImage.py:839
msgid "Color quantization will be repeated this many times."
msgstr ""

#: appPlugins/ToolImage.py:858
msgid "Stroke"
msgstr ""

#: appPlugins/ToolImage.py:860
msgid "Width of the stroke to be applied to the shape."
msgstr ""

#: appPlugins/ToolImage.py:871
msgid "Rounding"
msgstr ""

#: appPlugins/ToolImage.py:873
msgid "Rounding coordinates to a given decimal place."
msgstr ""

#: appPlugins/ToolImage.py:888
msgid "Blur"
msgstr ""

#: appPlugins/ToolImage.py:894
msgid "Selective Gaussian blur preprocessing."
msgstr ""

#: appPlugins/ToolImage.py:904
msgid "Delta"
msgstr ""

#: appPlugins/ToolImage.py:906
msgid "RGBA delta threshold for selective Gaussian blur preprocessing."
msgstr ""

#: appPlugins/ToolImage.py:919
msgid "Import image"
msgstr ""

#: appPlugins/ToolImage.py:922
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr ""

#: appPlugins/ToolInvertGerber.py:217
msgid "Gerber object that will be inverted."
msgstr ""

#: appPlugins/ToolInvertGerber.py:238
msgid "Parameters for this tool"
msgstr ""

#: appPlugins/ToolInvertGerber.py:285
msgid ""
"Will invert the Gerber object: areas that have copper\n"
"will be empty of copper and previous empty area will be\n"
"filled with copper."
msgstr ""

#: appPlugins/ToolIsolation.py:1119 appPlugins/ToolIsolation.py:1258
#: appPlugins/ToolNCC.py:957 appPlugins/ToolNCC.py:1101 appPlugins/ToolOptimal.py:249
msgid ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."
msgstr ""

#: appPlugins/ToolIsolation.py:1153 appPlugins/ToolIsolation.py:1217
#: appPlugins/ToolNCC.py:990 appPlugins/ToolNCC.py:1059
msgid "Checking tools for validity."
msgstr ""

#: appPlugins/ToolIsolation.py:1170 appPlugins/ToolIsolation.py:1234
#: appPlugins/ToolNCC.py:1007 appPlugins/ToolNCC.py:1076
msgid "Checking ..."
msgstr ""

#: appPlugins/ToolIsolation.py:1194 appPlugins/ToolIsolation.py:1655
#: appPlugins/ToolIsolation.py:1996 appPlugins/ToolIsolation.py:2578
#: appPlugins/ToolIsolation.py:2822 appPlugins/ToolNCC.py:1032 appPlugins/ToolNCC.py:1551
#: appPlugins/ToolPaint.py:1166 appPlugins/ToolPaint.py:1876
msgid "There are no tools selected in the Tool Table."
msgstr ""

#: appPlugins/ToolIsolation.py:1202
msgid "Incomplete isolation. At least one tool could not do a complete isolation."
msgstr ""

#: appPlugins/ToolIsolation.py:1304 appPlugins/ToolNCC.py:1146
msgid "Optimal tool diameter found"
msgstr ""

#: appPlugins/ToolIsolation.py:1437 appPlugins/ToolMilling.py:2168
#: appPlugins/ToolNCC.py:1295 appPlugins/ToolPaint.py:949
msgid "New tool added to Tool Table from Tools Database."
msgstr ""

#: appPlugins/ToolIsolation.py:1485 appPlugins/ToolNCC.py:1355 appPlugins/ToolPaint.py:1008
msgid "Default tool added to Tool Table."
msgstr ""

#: appPlugins/ToolIsolation.py:1516 appPlugins/ToolNCC.py:1412 appPlugins/ToolPaint.py:1033
#: appPlugins/ToolSolderPaste.py:630
msgid "Tool from Tool Table was edited."
msgstr ""

#: appPlugins/ToolIsolation.py:1528 appPlugins/ToolNCC.py:1425 appPlugins/ToolPaint.py:1046
msgid "Cancelled. New diameter value is already in the Tool Table."
msgstr ""

#: appPlugins/ToolIsolation.py:1576 appPlugins/ToolNCC.py:1476 appPlugins/ToolPaint.py:1096
#: appPlugins/ToolSolderPaste.py:687
msgid "Delete failed. Select a tool to delete."
msgstr ""

#: appPlugins/ToolIsolation.py:1582 appPlugins/ToolNCC.py:1482 appPlugins/ToolPaint.py:1102
#: appPlugins/ToolSolderPaste.py:692
msgid "Tools deleted from Tool Table."
msgstr ""

#: appPlugins/ToolIsolation.py:1634
msgid "Isolating"
msgstr ""

#: appPlugins/ToolIsolation.py:1688
msgid "Click on a polygon to isolate it."
msgstr ""

#: appPlugins/ToolIsolation.py:1866 appPlugins/ToolIsolation.py:1894
#: appPlugins/ToolIsolation.py:2056 appPlugins/ToolIsolation.py:2283
msgid "Subtracting Geo"
msgstr ""

#: appPlugins/ToolIsolation.py:1870 appPlugins/ToolIsolation.py:2060
#: appPlugins/ToolIsolation.py:2287
msgid "Intersecting Geo"
msgstr ""

#: appPlugins/ToolIsolation.py:1920 appPlugins/ToolIsolation.py:2137
#: appPlugins/ToolIsolation.py:2364
msgid "Empty Geometry in"
msgstr ""

#: appPlugins/ToolIsolation.py:2149
msgid ""
"Partial failure. The geometry was processed with all tools.\n"
"But there are still not-isolated geometry elements. Try to include a tool with smaller "
"diameter."
msgstr ""

#: appPlugins/ToolIsolation.py:2152
msgid "The following are coordinates for the copper features that could not be isolated:"
msgstr ""

#: appPlugins/ToolIsolation.py:2544 appPlugins/ToolPaint.py:1277
msgid "Removed polygon"
msgstr ""

#: appPlugins/ToolIsolation.py:2545 appPlugins/ToolPaint.py:1278
msgid "Click to add/remove next polygon or right click to start."
msgstr ""

#: appPlugins/ToolIsolation.py:2550 appPlugins/ToolPaint.py:1283
msgid "No polygon detected under click position."
msgstr ""

#: appPlugins/ToolIsolation.py:2592 appPlugins/ToolPaint.py:1313
#: appPlugins/ToolPunchGerber.py:1787
msgid "List of single polygons is empty. Aborting."
msgstr ""

#: appPlugins/ToolIsolation.py:2727
msgid "Click the end point of the paint area."
msgstr ""

#: appPlugins/ToolIsolation.py:3041 appPlugins/ToolNCC.py:3978 appPlugins/ToolPaint.py:2859
#: appPlugins/ToolSolderPaste.py:589
msgid "New tool added to Tool Table."
msgstr ""

#: appPlugins/ToolIsolation.py:3388
msgid "Gerber object for isolation routing."
msgstr ""

#: appPlugins/ToolIsolation.py:3412 appPlugins/ToolNCC.py:4109
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""

#: appPlugins/ToolIsolation.py:3436
msgid ""
"This is the Tool Number.\n"
"Isolation routing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create Isolation geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create routing geometry."
msgstr ""

#: appPlugins/ToolIsolation.py:3478 appPlugins/ToolMilling.py:4190 appPlugins/ToolNCC.py:210
#: appPlugins/ToolNCC.py:4189 appPlugins/ToolPaint.py:206 appPlugins/ToolPaint.py:3065
msgid "Add from DB"
msgstr ""

#: appPlugins/ToolIsolation.py:3500 appPlugins/ToolNCC.py:4216
msgid ""
"Find a tool diameter that is guaranteed\n"
"to do a complete isolation."
msgstr ""

#: appPlugins/ToolIsolation.py:3539 appPlugins/ToolMilling.py:4240
#: appPlugins/ToolNCC.py:4255 appPlugins/ToolPaint.py:3117
#: appPlugins/ToolSolderPaste.py:1330
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""

#: appPlugins/ToolIsolation.py:3850
msgid ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""

#: appPlugins/ToolIsolation.py:3860
msgid "Object whose area will be removed from isolation geometry."
msgstr ""

#: appPlugins/ToolIsolation.py:3931 appPlugins/ToolPunchGerber.py:2344
msgid "Select all available."
msgstr ""

#: appPlugins/ToolIsolation.py:3937 appPlugins/ToolPunchGerber.py:2350
msgid "Clear the selection."
msgstr ""

#: appPlugins/ToolIsolation.py:3970
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""

#: appPlugins/ToolLevelling.py:555 appPlugins/ToolLevelling.py:885
msgid ""
"Voronoi function can not be loaded.\n"
"Shapely >= 1.8 is required"
msgstr ""

#: appPlugins/ToolLevelling.py:583
msgid "Click on canvas to add a Probe Point..."
msgstr ""

#: appPlugins/ToolLevelling.py:831
msgid "Point is not within the object area. Choose another point."
msgstr ""

#: appPlugins/ToolLevelling.py:851
msgid "Added a Probe Point... Click again to add another or right click to finish ..."
msgstr ""

#: appPlugins/ToolLevelling.py:873
msgid "Finished adding Probe Points..."
msgstr ""

#: appPlugins/ToolLevelling.py:1083
msgid "COM list updated ..."
msgstr ""

#: appPlugins/ToolLevelling.py:1119
msgid "Connected"
msgstr ""

#: appPlugins/ToolLevelling.py:1127 appPlugins/ToolLevelling.py:1149
#: appPlugins/ToolLevelling.py:2013 appPlugins/ToolLevelling.py:2020
msgid "Sender"
msgstr ""

#: appPlugins/ToolLevelling.py:1130
msgid "Port connected"
msgstr ""

#: appPlugins/ToolLevelling.py:1134
msgid "Could not connect to GRBL on port"
msgstr ""

#: appPlugins/ToolLevelling.py:1141 appPlugins/ToolLevelling.py:2094
msgid "Disconnected"
msgstr ""

#: appPlugins/ToolLevelling.py:1151
msgid "Port is connected. Disconnecting"
msgstr ""

#: appPlugins/ToolLevelling.py:1153
msgid "Could not connect to port"
msgstr ""

#: appPlugins/ToolLevelling.py:1183 appPlugins/ToolLevelling.py:1617
msgid "Sending"
msgstr ""

#: appPlugins/ToolLevelling.py:1312
msgid "GRBL is doing a home cycle."
msgstr ""

#: appPlugins/ToolLevelling.py:1318
msgid "GRBL software reset was sent."
msgstr ""

#: appPlugins/ToolLevelling.py:1326
msgid "GRBL resumed."
msgstr ""

#: appPlugins/ToolLevelling.py:1330
msgid "GRBL paused."
msgstr ""

#: appPlugins/ToolLevelling.py:1504
msgid "There is nothing to view"
msgstr ""

#: appPlugins/ToolLevelling.py:1510
msgid "Code Viewer"
msgstr ""

#: appPlugins/ToolLevelling.py:1548
msgid "Loaded Machine Code into Code Viewer"
msgstr ""

#: appPlugins/ToolLevelling.py:1562 appPlugins/ToolLevelling.py:1566
#: appPlugins/ToolLevelling.py:2302
msgid "Import Height Map"
msgstr ""

#: appPlugins/ToolLevelling.py:1593
msgid "Failed to open height map file"
msgstr ""

#: appPlugins/ToolLevelling.py:1643
msgid "Finished probing. Doing the autolevelling."
msgstr ""

#: appPlugins/ToolLevelling.py:1648
msgid "Sending probing GCode to the GRBL controller."
msgstr ""

#: appPlugins/ToolLevelling.py:1691
msgid "Empty GRBL heightmap."
msgstr ""

#: appPlugins/ToolLevelling.py:1695
msgid "Finished autolevelling."
msgstr ""

#: appPlugins/ToolLevelling.py:1757
msgid "CNCJob source object to be levelled."
msgstr ""

#: appPlugins/ToolLevelling.py:1790
msgid "Probe Points Table"
msgstr ""

#: appPlugins/ToolLevelling.py:1791
msgid "Generate GCode that will obtain the height map"
msgstr ""

#: appPlugins/ToolLevelling.py:1793
msgid "Show"
msgstr ""

#: appPlugins/ToolLevelling.py:1794
msgid "Toggle the display of the Probe Points table."
msgstr ""

#: appPlugins/ToolLevelling.py:1817
msgid "X-Y Coordinates"
msgstr ""

#: appPlugins/ToolLevelling.py:1817
msgid "Height"
msgstr ""

#: appPlugins/ToolLevelling.py:1821
msgid "Plot probing points"
msgstr ""

#: appPlugins/ToolLevelling.py:1823
msgid ""
"Plot the probing points in the table.\n"
"If a Voronoi method is used then\n"
"the Voronoi areas are also plotted."
msgstr ""

#: appPlugins/ToolLevelling.py:1834
msgid ""
"Will create a GCode which will be sent to the controller,\n"
"either through a file or directly, with the intent to get the height map\n"
"that is to modify the original GCode to level the cutting height."
msgstr ""

#: appPlugins/ToolLevelling.py:1943
msgid "Add Probe Points"
msgstr ""

#: appPlugins/ToolLevelling.py:2034
msgid "COM list"
msgstr ""

#: appPlugins/ToolLevelling.py:2036 appPlugins/ToolLevelling.py:2051
msgid "Lists the available serial ports."
msgstr ""

#: appPlugins/ToolLevelling.py:2040
msgid "Search"
msgstr ""

#: appPlugins/ToolLevelling.py:2042
msgid "Search for the available serial ports."
msgstr ""

#: appPlugins/ToolLevelling.py:2049
msgid "Baud rates"
msgstr ""

#: appPlugins/ToolLevelling.py:2068
msgid "New, custom baudrate."
msgstr ""

#: appPlugins/ToolLevelling.py:2076
msgid "Add the specified custom baudrate to the list."
msgstr ""

#: appPlugins/ToolLevelling.py:2082
msgid "Delete selected baudrate"
msgstr ""

#: appPlugins/ToolLevelling.py:2086
msgid "Reset"
msgstr ""

#: appPlugins/ToolLevelling.py:2088
msgid "Software reset of the controller."
msgstr ""

#: appPlugins/ToolLevelling.py:2096
msgid "Connect to the selected port with the selected baud rate."
msgstr ""

#: appPlugins/ToolLevelling.py:2120
msgid "Jog"
msgstr ""

#: appPlugins/ToolLevelling.py:2122
msgid "Zero Axes"
msgstr ""

#: appPlugins/ToolLevelling.py:2156
msgid "Pause/Resume"
msgstr ""

#: appPlugins/ToolLevelling.py:2215
msgid "Send Command"
msgstr ""

#: appPlugins/ToolLevelling.py:2217 appPlugins/ToolLevelling.py:2227
msgid "Send a custom command to GRBL."
msgstr ""

#: appPlugins/ToolLevelling.py:2222
msgid "Type GRBL command ..."
msgstr ""

#: appPlugins/ToolLevelling.py:2225
msgid "Send"
msgstr ""

#: appPlugins/ToolLevelling.py:2233
msgid "Get Config parameter"
msgstr ""

#: appPlugins/ToolLevelling.py:2235
msgid "A GRBL configuration parameter."
msgstr ""

#: appPlugins/ToolLevelling.py:2240
msgid "Type GRBL parameter ..."
msgstr ""

#: appPlugins/ToolLevelling.py:2243
msgid "Get"
msgstr ""

#: appPlugins/ToolLevelling.py:2245
msgid "Get the value of a specified GRBL parameter."
msgstr ""

#: appPlugins/ToolLevelling.py:2253
msgid "Get Report"
msgstr ""

#: appPlugins/ToolLevelling.py:2255
msgid "Print in shell the GRBL report."
msgstr ""

#: appPlugins/ToolLevelling.py:2261
msgid "Apply AutoLevelling"
msgstr ""

#: appPlugins/ToolLevelling.py:2263
msgid ""
"Will send the probing GCode to the GRBL controller,\n"
"wait for the Z probing data and then apply this data\n"
"over the original GCode therefore doing autolevelling."
msgstr ""

#: appPlugins/ToolLevelling.py:2272
msgid "Will save the GRBL height map."
msgstr ""

#: appPlugins/ToolLevelling.py:2282
msgid "Save Probing GCode"
msgstr ""

#: appPlugins/ToolLevelling.py:2284
msgid "Will save the probing GCode."
msgstr ""

#: appPlugins/ToolLevelling.py:2295
msgid "View/Edit the probing GCode."
msgstr ""

#: appPlugins/ToolLevelling.py:2304
msgid ""
"Import the file that has the Z heights\n"
"obtained through probing and then apply this data\n"
"over the original GCode therefore\n"
"doing autolevelling."
msgstr ""

#: appPlugins/ToolMarkers.py:319 appPlugins/ToolMarkers.py:1181
msgid "Click to add next marker or right click to finish."
msgstr ""

#: appPlugins/ToolMarkers.py:514 appPlugins/ToolMarkers.py:825 appPlugins/ToolMarkers.py:871
#: appPlugins/ToolMarkers.py:934 appPlugins/ToolMarkers.py:980
msgid "Please select at least a location"
msgstr ""

#: appPlugins/ToolMarkers.py:802 appPlugins/ToolMarkers.py:911
msgid "The tool diameter is zero."
msgstr ""

#: appPlugins/ToolMarkers.py:903 appPlugins/ToolMarkers.py:1019
msgid "Excellon object with corner drills created."
msgstr ""

#: appPlugins/ToolMarkers.py:1055 appPlugins/ToolSolderPaste.py:966
msgid "There is no Geometry object available."
msgstr ""

#: appPlugins/ToolMarkers.py:1123
msgid "A Gerber object with corner markers was created."
msgstr ""

#: appPlugins/ToolMarkers.py:1180
msgid "Added marker"
msgstr ""

#: appPlugins/ToolMarkers.py:1264
msgid "The Gerber object to which will be added corner markers."
msgstr ""

#: appPlugins/ToolMarkers.py:1350
msgid ""
"Reference for offseting the marker locations.\n"
"- Edge - referenced from the bounding box edge\n"
"- Center - referenced from the bounding box center"
msgstr ""

#: appPlugins/ToolMarkers.py:1400
msgid "Locations"
msgstr ""

#: appPlugins/ToolMarkers.py:1401
msgid "Locations where to place corner markers."
msgstr ""

#: appPlugins/ToolMarkers.py:1433
msgid "Toggle ALL"
msgstr ""

#: appPlugins/ToolMarkers.py:1452
msgid ""
"When the manual type is chosen, the markers\n"
"are manually placed on canvas."
msgstr ""

#: appPlugins/ToolMarkers.py:1457
msgid "Numeric"
msgstr ""

#: appPlugins/ToolMarkers.py:1470
msgid "Tuple of marker coordinates."
msgstr ""

#: appPlugins/ToolMarkers.py:1481
msgid "Add Marker"
msgstr ""

#: appPlugins/ToolMarkers.py:1484 appPlugins/ToolMarkers.py:1580
msgid "Will add corner markers to the selected object."
msgstr ""

#: appPlugins/ToolMarkers.py:1492
msgid "Drills in Locations"
msgstr ""

#: appPlugins/ToolMarkers.py:1519
msgid "Will add drill holes in the center of the markers."
msgstr ""

#: appPlugins/ToolMarkers.py:1526
msgid "Check in Locations"
msgstr ""

#: appPlugins/ToolMarkers.py:1533
msgid ""
"Will create an Excellon object using a special preprocessor.\n"
"The spindle will not start and the mounted probe will move to\n"
"the corner locations, wait for the user interaction and then\n"
"move to the next location until the last one."
msgstr ""

#: appPlugins/ToolMarkers.py:1543
msgid "Insert Markers"
msgstr ""

#: appPlugins/ToolMarkers.py:1545
msgid ""
"Enabled only if markers are available (added to an object).\n"
"Those markers will be inserted in yet another object."
msgstr ""

#: appPlugins/ToolMarkers.py:1558
msgid "Specify the type of object where the markers are inserted."
msgstr ""

#: appPlugins/ToolMarkers.py:1577
msgid "Insert Marker"
msgstr ""

#: appPlugins/ToolMilling.py:885
msgid "Could not build the Plugin UI"
msgstr ""

#: appPlugins/ToolMilling.py:1345
msgid "Milling Tool"
msgstr ""

#: appPlugins/ToolMilling.py:1415
msgid "Pressure"
msgstr ""

#: appPlugins/ToolMilling.py:1417
msgid ""
"Negative value. The higher the absolute value\n"
"the stronger the pressure of the brush on the material."
msgstr ""

#: appPlugins/ToolMilling.py:1944
msgid ""
"For V-shape tools the depth of cut is\n"
"calculated from other parameters like:\n"
"- 'V-tip Angle' -> angle at the tip of the tool\n"
"- 'V-tip Dia' -> diameter at the tip of the tool \n"
"- Tool Dia -> 'Dia' column found in the Tool Table\n"
"NB: a value of zero means that Tool Dia = 'V-tip Dia'"
msgstr ""

#: appPlugins/ToolMilling.py:2226
msgid "Tool added in Tool Table."
msgstr ""

#: appPlugins/ToolMilling.py:2341
msgid "Tool was edited in Tool Table."
msgstr ""

#: appPlugins/ToolMilling.py:2370 appPlugins/ToolMilling.py:2379
msgid "Failed. Select a tool to copy."
msgstr ""

#: appPlugins/ToolMilling.py:2403
msgid "Tool was copied in Tool Table."
msgstr ""

#: appPlugins/ToolMilling.py:2431 appPlugins/ToolMilling.py:2440
msgid "Failed. Select a tool to delete."
msgstr ""

#: appPlugins/ToolMilling.py:2461
msgid "Tool was deleted in Tool Table."
msgstr ""

#: appPlugins/ToolMilling.py:2749 appPlugins/ToolMilling.py:2914
msgid "This Geometry can't be processed because it is"
msgstr ""

#: appPlugins/ToolMilling.py:2782 appPlugins/ToolMilling.py:2948
msgid "Failed. No tool selected in the tool table ..."
msgstr ""

#: appPlugins/ToolMilling.py:3295 appPlugins/ToolPaint.py:1820
msgid "Geometry could not be painted completely"
msgstr ""

#: appPlugins/ToolMilling.py:3952 appPlugins/ToolNCC.py:4059 appPlugins/ToolPaint.py:2942
msgid "Source object for milling operation."
msgstr ""

#: appPlugins/ToolMilling.py:3965
msgid "Object for milling operation."
msgstr ""

#: appPlugins/ToolMilling.py:4004
msgid "Tools in the object used for milling."
msgstr ""

#: appPlugins/ToolMilling.py:4152
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""

#: appPlugins/ToolMilling.py:4162
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries that holds "
"the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the geometry "
"data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the plot on "
"canvas\n"
"for the corresponding tool."
msgstr ""

#: appPlugins/ToolMilling.py:4322
msgid "Offset Type"
msgstr ""

#: appPlugins/ToolMilling.py:4325
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a 'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside.\n"
"- Custom -> The tool will cut at an chosen offset."
msgstr ""

#: appPlugins/ToolMilling.py:4345
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Custom'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""

#: appPlugins/ToolMilling.py:4888
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Geometry (Milling) Objects."
msgstr ""

#: appPlugins/ToolMilling.py:4899
msgid "Allow levelling"
msgstr ""

#: appPlugins/ToolMilling.py:4901
msgid "Allow levelling by having segments size more than zero."
msgstr ""

#: appPlugins/ToolMove.py:95
msgid "MOVE: Click on the Start point ..."
msgstr ""

#: appPlugins/ToolMove.py:106
msgid "Cancelled. No object(s) to move."
msgstr ""

#: appPlugins/ToolMove.py:155
msgid "Error when mouse left click."
msgstr ""

#: appPlugins/ToolNCC.py:1044
msgid "Incomplete isolation. None of the selected tools could do a complete isolation."
msgstr ""

#: appPlugins/ToolNCC.py:1047
msgid "At least one of the selected tools can do a complete isolation."
msgstr ""

#: appPlugins/ToolNCC.py:1192 appPlugins/ToolNCC.py:1271 appPlugins/ToolNCC.py:1329
#: appPlugins/ToolNCC.py:3965 appPlugins/ToolPaint.py:837 appPlugins/ToolPaint.py:923
#: appPlugins/ToolPaint.py:983 appPlugins/ToolPaint.py:2846
#: appPlugins/ToolSolderPaste.py:584
msgid "Tool already in Tool Table."
msgstr ""

#: appPlugins/ToolNCC.py:1920 appPlugins/ToolNCC.py:2906
msgid "NCC Tool. Preparing non-copper polygons."
msgstr ""

#: appPlugins/ToolNCC.py:1980 appPlugins/ToolNCC.py:3025
msgid "NCC Tool. Calculate 'empty' area."
msgstr ""

#: appPlugins/ToolNCC.py:1991 appPlugins/ToolNCC.py:2020 appPlugins/ToolNCC.py:2126
#: appPlugins/ToolNCC.py:2139 appPlugins/ToolNCC.py:3040 appPlugins/ToolNCC.py:3145
#: appPlugins/ToolNCC.py:3160 appPlugins/ToolNCC.py:3428 appPlugins/ToolNCC.py:3529
#: appPlugins/ToolNCC.py:3544
msgid "Buffering finished"
msgstr ""

#: appPlugins/ToolNCC.py:1995 appPlugins/ToolNCC.py:2024 appPlugins/ToolNCC.py:2130
#: appPlugins/ToolNCC.py:2142 appPlugins/ToolNCC.py:3048 appPlugins/ToolNCC.py:3167
#: appPlugins/ToolNCC.py:3435 appPlugins/ToolNCC.py:3551
msgid "Could not get the extent of the area to be non copper cleared."
msgstr ""

#: appPlugins/ToolNCC.py:2003 appPlugins/ToolNCC.py:2153 appPlugins/ToolNCC.py:3178
msgid "NCC Tool. Finished calculation of 'empty' area."
msgstr ""

#: appPlugins/ToolNCC.py:2056 appPlugins/ToolNCC.py:3075 appPlugins/ToolNCC.py:3152
#: appPlugins/ToolNCC.py:3455 appPlugins/ToolNCC.py:3536
msgid "Isolation geometry is broken. Margin is less than isolation tool diameter."
msgstr ""

#: appPlugins/ToolNCC.py:2146 appPlugins/ToolNCC.py:3171 appPlugins/ToolNCC.py:3554
msgid "The selected object is not suitable for copper clearing."
msgstr ""

#: appPlugins/ToolNCC.py:2196
msgid "Clearing the polygon with the method: lines."
msgstr ""

#: appPlugins/ToolNCC.py:2206
msgid "Failed. Clearing the polygon with the method: seed."
msgstr ""

#: appPlugins/ToolNCC.py:2215
msgid "Failed. Clearing the polygon with the method: standard."
msgstr ""

#: appPlugins/ToolNCC.py:2231
msgid "Polygon could not be cleared. Location:"
msgstr ""

#: appPlugins/ToolNCC.py:2284
msgid "There is no copper clearing tool in the selection and at least one is needed."
msgstr ""

#: appPlugins/ToolNCC.py:2299 appPlugins/ToolNCC.py:2993
msgid "NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
msgstr ""

#: appPlugins/ToolNCC.py:2327 appPlugins/ToolNCC.py:2565
msgid "NCC Tool failed creating bounding box."
msgstr ""

#: appPlugins/ToolNCC.py:2347 appPlugins/ToolNCC.py:2608 appPlugins/ToolNCC.py:3192
#: appPlugins/ToolNCC.py:3579
msgid "NCC Tool clearing with tool diameter"
msgstr ""

#: appPlugins/ToolNCC.py:2347 appPlugins/ToolNCC.py:2608 appPlugins/ToolNCC.py:3192
#: appPlugins/ToolNCC.py:3579
msgid "started."
msgstr ""

#: appPlugins/ToolNCC.py:2482
msgid "Could not use the tool for copper clear."
msgstr ""

#: appPlugins/ToolNCC.py:2505 appPlugins/ToolNCC.py:3354
msgid ""
"There is no NCC Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted geometry.\n"
"Change the painting parameters and try again."
msgstr ""

#: appPlugins/ToolNCC.py:2515 appPlugins/ToolNCC.py:3363
msgid "NCC Tool clear all done."
msgstr ""

#: appPlugins/ToolNCC.py:2518 appPlugins/ToolNCC.py:3366
msgid "NCC Tool clear all done but the copper features isolation is broken for"
msgstr ""

#: appPlugins/ToolNCC.py:2520 appPlugins/ToolNCC.py:2770 appPlugins/ToolNCC.py:3368
#: appPlugins/ToolNCC.py:3751
msgid "tools"
msgstr ""

#: appPlugins/ToolNCC.py:2547
msgid "NCC Tool. Rest machining copper clearing task started."
msgstr ""

#: appPlugins/ToolNCC.py:2766 appPlugins/ToolNCC.py:3747
msgid "NCC Tool Rest Machining clear all done."
msgstr ""

#: appPlugins/ToolNCC.py:2769 appPlugins/ToolNCC.py:3750
msgid ""
"NCC Tool Rest Machining clear all done but the copper features isolation is broken for"
msgstr ""

#: appPlugins/ToolNCC.py:2867
msgid "NCC Tool started. Reading parameters."
msgstr ""

#: appPlugins/ToolNCC.py:3856
msgid ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. Reload the Gerber "
"file after this change."
msgstr ""

#: appPlugins/ToolNCC.py:4075
msgid ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""

#: appPlugins/ToolNCC.py:4133
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""

#: appPlugins/ToolNCC.py:4542
msgid ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""

#: appPlugins/ToolObjectDistance.py:86 appPlugins/ToolObjectDistance.py:432
msgid "Object Distance"
msgstr ""

#: appPlugins/ToolObjectDistance.py:188
msgid "Objects intersects or touch at"
msgstr ""

#: appPlugins/ToolObjectDistance.py:199 appPlugins/ToolObjectDistance.py:223
#: appPlugins/ToolObjectDistance.py:233 appPlugins/ToolObjectDistance.py:244
#: appPlugins/ToolObjectDistance.py:267 appPlugins/ToolObjectDistance.py:296
#: appPlugins/ToolObjectDistance.py:314 appPlugins/ToolObjectDistance.py:333
msgid "Select two objects and no more. Currently the selection has objects: "
msgstr ""

#: appPlugins/ToolObjectDistance.py:360
msgid "Jumped to the half point between the two selected objects"
msgstr ""

#: appPlugins/ToolObjectDistance.py:463
msgid ""
"The type of distance to be calculated.\n"
"- Nearest points - minimal distance between objects\n"
"- Center points - distance between the center of the bounding boxes"
msgstr ""

#: appPlugins/ToolObjectDistance.py:469
msgid "Nearest points"
msgstr ""

#: appPlugins/ToolObjectDistance.py:469
msgid "Center points"
msgstr ""

#: appPlugins/ToolObjectDistance.py:587
msgid "Half Point"
msgstr ""

#: appPlugins/ToolObjectDistance.py:588 appPlugins/ToolObjectDistance.py:593
msgid "This is the middle point of the point to point Euclidean distance."
msgstr ""

#: appPlugins/ToolObjectDistance.py:603
msgid "Jump to Half Point"
msgstr ""

#: appPlugins/ToolOptimal.py:102 appPlugins/ToolOptimal.py:461
msgid "Find Optimal"
msgstr ""

#: appPlugins/ToolOptimal.py:213
msgid "Only Gerber objects can be evaluated."
msgstr ""

#: appPlugins/ToolOptimal.py:219
msgid "Optimal Tool. Started to search for the minimum distance between copper features."
msgstr ""

#: appPlugins/ToolOptimal.py:229
msgid "Optimal Tool. Parsing geometry for aperture"
msgstr ""

#: appPlugins/ToolOptimal.py:240
msgid "Optimal Tool. Creating a buffer for the object geometry."
msgstr ""

#: appPlugins/ToolOptimal.py:254
msgid "Optimal Tool. Finding the distances between each two elements. Iterations"
msgstr ""

#: appPlugins/ToolOptimal.py:288
msgid "Optimal Tool. Finding the minimum distance."
msgstr ""

#: appPlugins/ToolOptimal.py:305
msgid "Optimal Tool. Finished successfully."
msgstr ""

#: appPlugins/ToolOptimal.py:490
msgid "GERBER"
msgstr ""

#: appPlugins/ToolOptimal.py:516
msgid "Number of decimals kept for found distances."
msgstr ""

#: appPlugins/ToolOptimal.py:527
msgid "Minimum distance"
msgstr ""

#: appPlugins/ToolOptimal.py:528
msgid "Display minimum distance between copper features."
msgstr ""

#: appPlugins/ToolOptimal.py:538
msgid "Determined"
msgstr ""

#: appPlugins/ToolOptimal.py:550
msgid "Occurring"
msgstr ""

#: appPlugins/ToolOptimal.py:551
msgid "How many times this minimum is found."
msgstr ""

#: appPlugins/ToolOptimal.py:559
msgid "Minimum points coordinates"
msgstr ""

#: appPlugins/ToolOptimal.py:560 appPlugins/ToolOptimal.py:566
msgid "Coordinates for points where minimum distance was found."
msgstr ""

#: appPlugins/ToolOptimal.py:579 appPlugins/ToolOptimal.py:664
msgid "Jump to selected position"
msgstr ""

#: appPlugins/ToolOptimal.py:581 appPlugins/ToolOptimal.py:666
msgid ""
"Select a position in the Locations text box and then\n"
"click this button."
msgstr ""

#: appPlugins/ToolOptimal.py:591
msgid "Other distances"
msgstr ""

#: appPlugins/ToolOptimal.py:592
msgid ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."
msgstr ""

#: appPlugins/ToolOptimal.py:603
msgid "Other distances points coordinates"
msgstr ""

#: appPlugins/ToolOptimal.py:604 appPlugins/ToolOptimal.py:619 appPlugins/ToolOptimal.py:626
#: appPlugins/ToolOptimal.py:643 appPlugins/ToolOptimal.py:650
msgid ""
"Other distances and the coordinates for points\n"
"where the distance was found."
msgstr ""

#: appPlugins/ToolOptimal.py:618
msgid "Gerber distances"
msgstr ""

#: appPlugins/ToolOptimal.py:642
msgid "Points coordinates"
msgstr ""

#: appPlugins/ToolOptimal.py:674
msgid "Find Minimum"
msgstr ""

#: appPlugins/ToolOptimal.py:677
msgid ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."
msgstr ""

#: appPlugins/ToolPDF.py:26
msgid "PDF Import Tool"
msgstr ""

#: appPlugins/ToolPDF.py:78 appPlugins/ToolPDF.py:82
msgid "Open PDF"
msgstr ""

#: appPlugins/ToolPDF.py:85
msgid "Open PDF cancelled"
msgstr ""

#: appPlugins/ToolPDF.py:113
msgid "Parsing"
msgstr ""

#: appPlugins/ToolPDF.py:273 appPlugins/ToolPDF.py:346
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr ""

#: appPlugins/ToolPDF.py:277 appPlugins/ToolPDF.py:350
msgid "Open PDF file failed."
msgstr ""

#: appPlugins/ToolPDF.py:282 appPlugins/ToolPDF.py:355
msgid "Rendered"
msgstr ""

#: appPlugins/ToolPaint.py:1144
msgid "Can't do Paint on MultiGeo geometries"
msgstr ""

#: appPlugins/ToolPaint.py:1181
msgid "Click on a polygon to paint it."
msgstr ""

#: appPlugins/ToolPaint.py:1781
msgid "Painting polygon with method: lines."
msgstr ""

#: appPlugins/ToolPaint.py:1793
msgid "Failed. Painting polygon with method: seed."
msgstr ""

#: appPlugins/ToolPaint.py:1804
msgid "Failed. Painting polygon with method: standard."
msgstr ""

#: appPlugins/ToolPaint.py:1896 appPlugins/ToolPaint.py:2084
msgid "Painting with tool diameter = "
msgstr ""

#: appPlugins/ToolPaint.py:1899 appPlugins/ToolPaint.py:2087
msgid "started"
msgstr ""

#: appPlugins/ToolPaint.py:1926 appPlugins/ToolPaint.py:2074
msgid "There is no geometry to process or the tool diameter is too big."
msgstr ""

#: appPlugins/ToolPaint.py:2040 appPlugins/ToolPaint.py:2266
msgid ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted geometry.\n"
"Change the painting parameters and try again."
msgstr ""

#: appPlugins/ToolPaint.py:2320
msgid "Painting ..."
msgstr ""

#: appPlugins/ToolPaint.py:2354 appPlugins/ToolPaint.py:2359 appPlugins/ToolPaint.py:2367
#: appPlugins/ToolPaint.py:2455 appPlugins/ToolPaint.py:2459 appPlugins/ToolPaint.py:2467
#: appPlugins/ToolPaint.py:2538 appPlugins/ToolPaint.py:2543 appPlugins/ToolPaint.py:2549
msgid "Paint Plugin."
msgstr ""

#: appPlugins/ToolPaint.py:2355 appPlugins/ToolPaint.py:2359 appPlugins/ToolPaint.py:2367
msgid "Normal painting polygon task started."
msgstr ""

#: appPlugins/ToolPaint.py:2356 appPlugins/ToolPaint.py:2456 appPlugins/ToolPaint.py:2540
msgid "Buffering geometry..."
msgstr ""

#: appPlugins/ToolPaint.py:2381 appPlugins/ToolPaint.py:2474 appPlugins/ToolPaint.py:2587
msgid "No polygon found."
msgstr ""

#: appPlugins/ToolPaint.py:2455 appPlugins/ToolPaint.py:2459 appPlugins/ToolPaint.py:2467
msgid "Paint all polygons task started."
msgstr ""

#: appPlugins/ToolPaint.py:2539 appPlugins/ToolPaint.py:2543 appPlugins/ToolPaint.py:2549
msgid "Painting area task started."
msgstr ""

#: appPlugins/ToolPaint.py:2919
msgid ""
"Create a Geometry object with toolpaths\n"
"that cover only the copper pattern."
msgstr ""

#: appPlugins/ToolPaint.py:2958
msgid ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""

#: appPlugins/ToolPaint.py:2992
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""

#: appPlugins/ToolPaint.py:3015
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""

#: appPlugins/ToolPaint.py:3298
msgid ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""

#: appPlugins/ToolPaint.py:3342
msgid "Create a Geometry Object which paints the polygons."
msgstr ""

#: appPlugins/ToolPanelize.py:96 appPlugins/ToolPanelize.py:1120
msgid "Panelization"
msgstr ""

#: appPlugins/ToolPanelize.py:349
msgid "Columns or Rows are zero value. Change them to a positive integer."
msgstr ""

#: appPlugins/ToolPanelize.py:392
msgid "Generating panel ... "
msgstr ""

#: appPlugins/ToolPanelize.py:487 appPlugins/ToolPanelize.py:800
#: appPlugins/ToolPanelize.py:1072 tclCommands/TclCommandPanelize.py:292
msgid "Generating panel ... Adding the source code."
msgstr ""

#: appPlugins/ToolPanelize.py:728
msgid "Optimizing the overlapping paths."
msgstr ""

#: appPlugins/ToolPanelize.py:760
msgid "Optimization complete."
msgstr ""

#: appPlugins/ToolPanelize.py:1081
msgid "Generating panel... Spawning copies"
msgstr ""

#: appPlugins/ToolPanelize.py:1097
#, python-brace-format
msgid "{text} Too big for the constrain area. Final panel has {col} columns and {row} rows"
msgstr ""

#: appPlugins/ToolPanelize.py:1105
msgid "Panel created successfully."
msgstr ""

#: appPlugins/ToolPanelize.py:1158
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""

#: appPlugins/ToolPanelize.py:1191
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""

#: appPlugins/ToolPanelize.py:1203
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""

#: appPlugins/ToolPanelize.py:1236
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""

#: appPlugins/ToolPanelize.py:1251
msgid ""
"The actual object that is used as container for the\n"
" selected object that is to be panelized."
msgstr ""

#: appPlugins/ToolPanelize.py:1259
msgid "Panel Data"
msgstr ""

#: appPlugins/ToolPanelize.py:1261
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""

#: appPlugins/ToolPanelize.py:1360
msgid "Constrain panel within"
msgstr ""

#: appPlugins/ToolPanelize.py:1407
msgid "Panelize Object"
msgstr ""

#: appPlugins/ToolPanelize.py:1410 appPlugins/ToolRulesCheck.py:1754
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""

#: appPlugins/ToolPcbWizard.py:102 appPlugins/ToolPcbWizard.py:386
msgid "PcbWizard Import"
msgstr ""

#: appPlugins/ToolPcbWizard.py:203 appPlugins/ToolPcbWizard.py:207
msgid "Load PcbWizard Excellon file"
msgstr ""

#: appPlugins/ToolPcbWizard.py:226 appPlugins/ToolPcbWizard.py:230
msgid "Load PcbWizard INF file"
msgstr ""

#: appPlugins/ToolPcbWizard.py:278
msgid ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""

#: appPlugins/ToolPcbWizard.py:298
msgid "PcbWizard .INF file loaded."
msgstr ""

#: appPlugins/ToolPcbWizard.py:302
msgid "Main PcbWizard Excellon file loaded."
msgstr ""

#: appPlugins/ToolPcbWizard.py:338
msgid "Cannot parse file"
msgstr ""

#: appPlugins/ToolPcbWizard.py:369
msgid "Import Excellon file failed."
msgstr ""

#: appPlugins/ToolPcbWizard.py:376
msgid "Imported"
msgstr ""

#: appPlugins/ToolPcbWizard.py:379
msgid "Excellon merging is in progress. Please wait..."
msgstr ""

#: appPlugins/ToolPcbWizard.py:381
msgid "The imported Excellon file is empty."
msgstr ""

#: appPlugins/ToolPcbWizard.py:398
msgid "Load files"
msgstr ""

#: appPlugins/ToolPcbWizard.py:404
msgid "Excellon file"
msgstr ""

#: appPlugins/ToolPcbWizard.py:406
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""

#: appPlugins/ToolPcbWizard.py:413
msgid "INF file"
msgstr ""

#: appPlugins/ToolPcbWizard.py:415
msgid "Load the INF file."
msgstr ""

#: appPlugins/ToolPcbWizard.py:428
msgid "Tool Number"
msgstr ""

#: appPlugins/ToolPcbWizard.py:430
msgid "Tool diameter in file units."
msgstr ""

#: appPlugins/ToolPcbWizard.py:445
msgid "Int. digits"
msgstr ""

#: appPlugins/ToolPcbWizard.py:447
msgid "The number of digits for the integral part of the coordinates."
msgstr ""

#: appPlugins/ToolPcbWizard.py:455
msgid "Frac. digits"
msgstr ""

#: appPlugins/ToolPcbWizard.py:457
msgid "The number of digits for the fractional part of the coordinates."
msgstr ""

#: appPlugins/ToolPcbWizard.py:465
msgid "No Suppression"
msgstr ""

#: appPlugins/ToolPcbWizard.py:466
msgid "Zeros supp."
msgstr ""

#: appPlugins/ToolPcbWizard.py:468
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""

#: appPlugins/ToolPcbWizard.py:482
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""

#: appPlugins/ToolPcbWizard.py:490
msgid "Import Excellon"
msgstr ""

#: appPlugins/ToolPcbWizard.py:492
msgid ""
"Import an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""

#: appPlugins/ToolPunchGerber.py:574
msgid "Click on a pad to select it."
msgstr ""

#: appPlugins/ToolPunchGerber.py:823 appPlugins/ToolPunchGerber.py:956
msgid "The value of the fixed diameter is 0.0. Aborting."
msgstr ""

#: appPlugins/ToolPunchGerber.py:1732
msgid "Added pad"
msgstr ""

#: appPlugins/ToolPunchGerber.py:1733
msgid "Click to add next pad or right click to start."
msgstr ""

#: appPlugins/ToolPunchGerber.py:1745
msgid "Removed pad"
msgstr ""

#: appPlugins/ToolPunchGerber.py:1746
msgid "Click to add/remove next pad or right click to start."
msgstr ""

#: appPlugins/ToolPunchGerber.py:1751
msgid "No pad detected under click position."
msgstr ""

#: appPlugins/ToolPunchGerber.py:1939
msgid "All selectable pads are selected."
msgstr ""

#: appPlugins/ToolPunchGerber.py:1956
msgid "Selection cleared."
msgstr ""

#: appPlugins/ToolPunchGerber.py:2024
msgid "Gerber into which to punch holes"
msgstr ""

#: appPlugins/ToolPunchGerber.py:2171
msgid "Remove the geometry of Excellon from the Gerber to create the holes in pads."
msgstr ""

#: appPlugins/ToolPunchGerber.py:2326
msgid ""
"When the manual type is chosen, the pads to be punched\n"
"are selected on the canvas but only those that\n"
"are in the processed pads."
msgstr ""

#: appPlugins/ToolPunchGerber.py:2360
msgid ""
"Create a Gerber object from the selected object, within\n"
"the specified box."
msgstr ""

#: appPlugins/ToolQRCode.py:215 appPlugins/ToolQRCode.py:561 appPlugins/ToolQRCode.py:612
msgid "Cancelled. There is no QRCode Data in the text box."
msgstr ""

#: appPlugins/ToolQRCode.py:392
msgid "QRCode Tool done."
msgstr ""

#: appPlugins/ToolQRCode.py:756
msgid "Gerber Object to which the QRCode will be added."
msgstr ""

#: appPlugins/ToolQRCode.py:796
msgid "The parameters used to shape the QRCode."
msgstr ""

#: appPlugins/ToolQRCode.py:906
msgid "Export QRCode"
msgstr ""

#: appPlugins/ToolQRCode.py:908
msgid ""
"Show a set of controls allowing to export the QRCode\n"
"to a SVG file or an PNG file."
msgstr ""

#: appPlugins/ToolQRCode.py:944
msgid "Transparent back color"
msgstr ""

#: appPlugins/ToolQRCode.py:969
msgid "Export QRCode SVG"
msgstr ""

#: appPlugins/ToolQRCode.py:971
msgid "Export a SVG file with the QRCode content."
msgstr ""

#: appPlugins/ToolQRCode.py:977
msgid "Export QRCode PNG"
msgstr ""

#: appPlugins/ToolQRCode.py:979
msgid "Export a PNG image file with the QRCode content."
msgstr ""

#: appPlugins/ToolQRCode.py:985
msgid "Insert QRCode"
msgstr ""

#: appPlugins/ToolQRCode.py:988
msgid "Create the QRCode object."
msgstr ""

#: appPlugins/ToolReport.py:18 appPlugins/ToolReport.py:148
msgid "Object Report"
msgstr ""

#: appPlugins/ToolReport.py:143
msgid "Object Properties are displayed."
msgstr ""

#: appPlugins/ToolReport.py:165
msgid "TYPE"
msgstr ""

#: appPlugins/ToolReport.py:166
msgid "NAME"
msgstr ""

#: appPlugins/ToolReport.py:196
msgid "Geo Type"
msgstr ""

#: appPlugins/ToolReport.py:199
msgid "Single-Geo"
msgstr ""

#: appPlugins/ToolReport.py:200
msgid "Multi-Geo"
msgstr ""

#: appPlugins/ToolReport.py:355 appPlugins/ToolReport.py:360 appPlugins/ToolReport.py:362
msgid "Metric"
msgstr ""

#: appPlugins/ToolRulesCheck.py:105 appPlugins/ToolRulesCheck.py:1162
msgid "Check Rules"
msgstr ""

#: appPlugins/ToolRulesCheck.py:677 appPlugins/ToolRulesCheck.py:737
#: appPlugins/ToolRulesCheck.py:774 appPlugins/ToolRulesCheck.py:846
#: appPlugins/ToolRulesCheck.py:900 appPlugins/ToolRulesCheck.py:938
#: appPlugins/ToolRulesCheck.py:1003
msgid "Value is not valid."
msgstr ""

#: appPlugins/ToolRulesCheck.py:691
msgid "TOP -> Copper to Copper clearance"
msgstr ""

#: appPlugins/ToolRulesCheck.py:702
msgid "BOTTOM -> Copper to Copper clearance"
msgstr ""

#: appPlugins/ToolRulesCheck.py:707 appPlugins/ToolRulesCheck.py:801
#: appPlugins/ToolRulesCheck.py:965
msgid "At least one Gerber object has to be selected for this rule but none is selected."
msgstr ""

#: appPlugins/ToolRulesCheck.py:743
msgid "One of the copper Gerber objects or the Outline Gerber object is not valid."
msgstr ""

#: appPlugins/ToolRulesCheck.py:756 appPlugins/ToolRulesCheck.py:920
msgid "Outline Gerber object presence is mandatory for this rule but it is not selected."
msgstr ""

#: appPlugins/ToolRulesCheck.py:773 appPlugins/ToolRulesCheck.py:800
msgid "Silk to Silk clearance"
msgstr ""

#: appPlugins/ToolRulesCheck.py:786
msgid "TOP -> Silk to Silk clearance"
msgstr ""

#: appPlugins/ToolRulesCheck.py:796
msgid "BOTTOM -> Silk to Silk clearance"
msgstr ""

#: appPlugins/ToolRulesCheck.py:852
msgid "One or more of the Gerber objects is not valid."
msgstr ""

#: appPlugins/ToolRulesCheck.py:860
msgid "TOP -> Silk to Solder Mask Clearance"
msgstr ""

#: appPlugins/ToolRulesCheck.py:866
msgid "BOTTOM -> Silk to Solder Mask Clearance"
msgstr ""

#: appPlugins/ToolRulesCheck.py:870
msgid "Both Silk and Solder Mask Gerber objects has to be either both Top or both Bottom."
msgstr ""

#: appPlugins/ToolRulesCheck.py:906
msgid "One of the Silk Gerber objects or the Outline Gerber object is not valid."
msgstr ""

#: appPlugins/ToolRulesCheck.py:950
msgid "TOP -> Minimum Solder Mask Sliver"
msgstr ""

#: appPlugins/ToolRulesCheck.py:960
msgid "BOTTOM -> Minimum Solder Mask Sliver"
msgstr ""

#: appPlugins/ToolRulesCheck.py:1009
msgid "One of the Copper Gerber objects or the Excellon objects is not valid."
msgstr ""

#: appPlugins/ToolRulesCheck.py:1025
msgid "Excellon object presence is mandatory for this rule but none is selected."
msgstr ""

#: appPlugins/ToolRulesCheck.py:1103 appPlugins/ToolRulesCheck.py:1116
#: appPlugins/ToolRulesCheck.py:1127 appPlugins/ToolRulesCheck.py:1140
msgid "STATUS"
msgstr ""

#: appPlugins/ToolRulesCheck.py:1106 appPlugins/ToolRulesCheck.py:1130
msgid "FAILED"
msgstr ""

#: appPlugins/ToolRulesCheck.py:1119 appPlugins/ToolRulesCheck.py:1143
msgid "PASSED"
msgstr ""

#: appPlugins/ToolRulesCheck.py:1120 appPlugins/ToolRulesCheck.py:1144
msgid "Violations: There are no violations for the current rule."
msgstr ""

#: appPlugins/ToolRulesCheck.py:1232
msgid "Top"
msgstr ""

#: appPlugins/ToolRulesCheck.py:1250
msgid "The Top Gerber Copper object for which rules are checked."
msgstr ""

#: appPlugins/ToolRulesCheck.py:1266 appPlugins/ToolRulesCheck.py:1332
msgid "SM"
msgstr ""

#: appPlugins/ToolRulesCheck.py:1268
msgid "The Top Gerber Solder Mask object for which rules are checked."
msgstr ""

#: appPlugins/ToolRulesCheck.py:1286
msgid "The Top Gerber Silkscreen object for which rules are checked."
msgstr ""

#: appPlugins/ToolRulesCheck.py:1298
msgid "Bottom"
msgstr ""

#: appPlugins/ToolRulesCheck.py:1316
msgid "The Bottom Gerber Copper object for which rules are checked."
msgstr ""

#: appPlugins/ToolRulesCheck.py:1334
msgid "The Bottom Gerber Solder Mask object for which rules are checked."
msgstr ""

#: appPlugins/ToolRulesCheck.py:1352
msgid "The Bottom Gerber Silkscreen object for which rules are checked."
msgstr ""

#: appPlugins/ToolRulesCheck.py:1381
msgid "The Gerber Outline (Cutout) object for which rules are checked."
msgstr ""

#: appPlugins/ToolRulesCheck.py:1395
msgid "Excellon objects for which to check rules."
msgstr ""

#: appPlugins/ToolRulesCheck.py:1414
msgid ""
"Excellon object for which to check rules.\n"
"Holds the plated holes or a general Excellon file content."
msgstr ""

#: appPlugins/ToolRulesCheck.py:1433
msgid ""
"Excellon object for which to check rules.\n"
"Holds the non-plated holes."
msgstr ""

#: appPlugins/ToolRulesCheck.py:1751
msgid "Run Rules Check"
msgstr ""

#: appPlugins/ToolShell.py:58
msgid "Type a command to be executed ..."
msgstr ""

#: appPlugins/ToolShell.py:67
msgid "Clear the text."
msgstr ""

#: appPlugins/ToolShell.py:102 appPlugins/ToolShell.py:104
msgid "...processing..."
msgstr ""

#: appPlugins/ToolShell.py:323
msgid "FlatCAM Evo Shell"
msgstr ""

#: appPlugins/ToolSolderPaste.py:110 appPlugins/ToolSolderPaste.py:1229
msgid "SolderPaste"
msgstr ""

#: appPlugins/ToolSolderPaste.py:554
msgid "Please enter a tool diameter to add, in Float format."
msgstr ""

#: appPlugins/ToolSolderPaste.py:642
msgid "Cancelled. Already in the Tool Table."
msgstr ""

#: appPlugins/ToolSolderPaste.py:746 appPlugins/ToolSolderPaste.py:970
#: appPlugins/ToolSolderPaste.py:1103 appPlugins/ToolSolderPaste.py:1106
#: appPlugins/ToolSolderPaste.py:1165
msgid "Selected object cannot be used."
msgstr ""

#: appPlugins/ToolSolderPaste.py:777
msgid "Tools table is empty."
msgstr ""

#: appPlugins/ToolSolderPaste.py:933
msgid "Some or all pads have no solder due of inadequate nozzle diameters..."
msgstr ""

#: appPlugins/ToolSolderPaste.py:947
msgid "Generating Solder Paste dispensing geometry..."
msgstr ""

#: appPlugins/ToolSolderPaste.py:1174
msgid "Export GCode ..."
msgstr ""

#: appPlugins/ToolSolderPaste.py:1250
msgid "A plugin to help dispense solder paste on the PCB pads using a CNC machine."
msgstr ""

#: appPlugins/ToolSolderPaste.py:1258
msgid "Gerber Solderpaste object."
msgstr ""

#: appPlugins/ToolSolderPaste.py:1279
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""

#: appPlugins/ToolSolderPaste.py:1301
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""

#: appPlugins/ToolSolderPaste.py:1308
msgid ""
"Tool Diameter. Its value\n"
"is the width of the solder paste dispensed."
msgstr ""

#: appPlugins/ToolSolderPaste.py:1323
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""

#: appPlugins/ToolSolderPaste.py:1391
msgid "Dispense"
msgstr ""

#: appPlugins/ToolSolderPaste.py:1406
msgid "Z Start"
msgstr ""

#: appPlugins/ToolSolderPaste.py:1419
msgid "Z Action"
msgstr ""

#: appPlugins/ToolSolderPaste.py:1432
msgid "Z Stop"
msgstr ""

#: appPlugins/ToolSolderPaste.py:1658
msgid "Generate solder paste dispensing geometry."
msgstr ""

#: appPlugins/ToolSolderPaste.py:1670
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""

#: appPlugins/ToolSolderPaste.py:1679
msgid "CNCJob"
msgstr ""

#: appPlugins/ToolSolderPaste.py:1689
msgid "Generate CNCJob"
msgstr ""

#: appPlugins/ToolSolderPaste.py:1692
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""

#: appPlugins/ToolSolderPaste.py:1705
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""

#: appPlugins/ToolSolderPaste.py:1714
msgid "Save GCode"
msgstr ""

#: appPlugins/ToolSolderPaste.py:1717
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""

#: appPlugins/ToolSub.py:260 appPlugins/ToolSub.py:498
msgid "No Target object loaded."
msgstr ""

#: appPlugins/ToolSub.py:263
msgid "Loading geometry from Gerber objects."
msgstr ""

#: appPlugins/ToolSub.py:281 appPlugins/ToolSub.py:511
msgid "No Subtractor object loaded."
msgstr ""

#: appPlugins/ToolSub.py:296
msgid "Not possible to subtract from the same object."
msgstr ""

#: appPlugins/ToolSub.py:336
msgid "Finished parsing geometry for aperture"
msgstr ""

#: appPlugins/ToolSub.py:338
msgid "Subtraction aperture processing finished."
msgstr ""

#: appPlugins/ToolSub.py:471 appPlugins/ToolSub.py:666 appPlugins/ToolSub.py:748
msgid "Generating new object failed."
msgstr ""

#: appPlugins/ToolSub.py:475 appPlugins/ToolSub.py:671
msgid "Created"
msgstr ""

#: appPlugins/ToolSub.py:524
msgid "Currently, the Subtractor geometry cannot be of type Multigeo."
msgstr ""

#: appPlugins/ToolSub.py:564
msgid "Parsing solid_geometry ..."
msgstr ""

#: appPlugins/ToolSub.py:566
msgid "Parsing solid_geometry for tool"
msgstr ""

#: appPlugins/ToolSub.py:777
msgid "A plugin to help subtract a Gerber/Geometry object from another of the same type."
msgstr ""

#: appPlugins/ToolSub.py:835
msgid ""
"Gerber object from which to subtract\n"
"the subtractor Gerber object."
msgstr ""

#: appPlugins/ToolSub.py:856 appPlugins/ToolSub.py:912
msgid "Subtractor"
msgstr ""

#: appPlugins/ToolSub.py:858
msgid ""
"Gerber object that will be subtracted\n"
"from the target Gerber object."
msgstr ""

#: appPlugins/ToolSub.py:868
msgid "Subtract Gerber"
msgstr ""

#: appPlugins/ToolSub.py:871
msgid ""
"Will remove the area occupied by the subtractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""

#: appPlugins/ToolSub.py:891
msgid "GEOMETRY"
msgstr ""

#: appPlugins/ToolSub.py:897
msgid ""
"Geometry object from which to subtract\n"
"the subtractor Geometry object."
msgstr ""

#: appPlugins/ToolSub.py:914
msgid ""
"Geometry object that will be subtracted\n"
"from the target Geometry object."
msgstr ""

#: appPlugins/ToolSub.py:935
msgid "Subtract Geometry"
msgstr ""

#: appPlugins/ToolSub.py:938
msgid ""
"Will remove the area occupied by the subtractor\n"
"Geometry from the Target Geometry."
msgstr ""

#: appPlugins/ToolTransform.py:326
msgid "CNCJob objects can't be rotated."
msgstr ""

#: appPlugins/ToolTransform.py:360
msgid "CNCJob objects can't be mirrored/flipped."
msgstr ""

#: appPlugins/ToolTransform.py:391
msgid "Skew transformation can not be done for 0, 90 and 180 degrees."
msgstr ""

#: appPlugins/ToolTransform.py:404
msgid "CNCJob objects can't be skewed."
msgstr ""

#: appPlugins/ToolTransform.py:420
msgid "Skew on the"
msgstr ""

#: appPlugins/ToolTransform.py:420 appPlugins/ToolTransform.py:455
#: appPlugins/ToolTransform.py:492
msgid "axis done"
msgstr ""

#: appPlugins/ToolTransform.py:438
msgid "CNCJob objects can't be scaled."
msgstr ""

#: appPlugins/ToolTransform.py:455
msgid "Scale on the"
msgstr ""

#: appPlugins/ToolTransform.py:471
msgid "CNCJob objects can't be offset."
msgstr ""

#: appPlugins/ToolTransform.py:492
msgid "Offset on the"
msgstr ""

#: appPlugins/ToolTransform.py:508
msgid "CNCJob objects can't be buffered."
msgstr ""

#: appPlugins/ToolTransform.py:579
msgid "A plugin that allow geometry transformation."
msgstr ""

#: appPlugins/ToolTransform.py:654
msgid ""
"The object used as reference.\n"
"The used point is the center of it's bounding box."
msgstr ""

#: appProcess.py:172
msgid "processes running."
msgstr ""

#: appTranslation.py:112
msgid "The application will restart."
msgstr ""

#: appTranslation.py:113
msgid "Are you sure do you want to change the current language to"
msgstr ""

#: appTranslation.py:244
msgid "The language will be applied at the next application start."
msgstr ""

#: appTranslation.py:245
msgid "The user does not have admin rights or UAC issues."
msgstr ""

#: appTranslation.py:246 appTranslation.py:252
msgid "Quit"
msgstr ""

#: assets/linux/flatcam-beta.desktop:3
msgid "FlatCAM Beta"
msgstr ""

#: assets/linux/flatcam-beta.desktop:8
msgid "G-Code from GERBERS"
msgstr ""

#: camlib.py:710
msgid "self.solid_geometry is neither BaseGeometry or list."
msgstr ""

#: camlib.py:1153
msgid "Pass"
msgstr ""

#: camlib.py:1175
msgid "Get Exteriors"
msgstr ""

#: camlib.py:1178
msgid "Get Interiors"
msgstr ""

#: camlib.py:2535
msgid "Object was rotated"
msgstr ""

#: camlib.py:2603
msgid "Object was skewed"
msgstr ""

#: camlib.py:2674
msgid "Object was buffered"
msgstr ""

#: camlib.py:2937
msgid "There is no such parameter"
msgstr ""

#: camlib.py:3154 camlib.py:3198 camlib.py:5668 camlib.py:6097
msgid "Indexing geometry before generating G-Code..."
msgstr ""

#: camlib.py:3231 camlib.py:4342 camlib.py:4601
msgid ""
"The Cut Z parameter has positive value. It is the depth value to drill into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo therefore the "
"app will convert the value to negative. Check the resulting CNC code (Gcode etc)."
msgstr ""

#: camlib.py:3238
msgid "The Cut Z parameter is zero. There will be no cut, aborting"
msgstr ""

#: camlib.py:3388 camlib.py:3830
msgid "The End X,Y format has to be (x, y)."
msgstr ""

#: camlib.py:3473 camlib.py:3924 camlib.py:4437 camlib.py:4688 camlib.py:5742 camlib.py:6179
msgid "Starting G-Code for tool with diameter"
msgstr ""

#: camlib.py:3600 camlib.py:4564 camlib.py:4811 camlib.py:7163 camlib.py:7440 camlib.py:7589
msgid "G91 coordinates not implemented"
msgstr ""

#: camlib.py:3609
msgid "Finished G-Code generation for tool:"
msgstr ""

#: camlib.py:3734 camlib.py:5615 camlib.py:6037
msgid "Cut_Z parameter is None or zero. Most likely a bad combinations of other parameters."
msgstr ""

#: camlib.py:3742 camlib.py:5623 camlib.py:6046
msgid ""
"The Cut Z parameter has positive value. It is the depth value to cut into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo therefore the "
"app will convert the value to negative.Check the resulting CNC code (Gcode etc)."
msgstr ""

#: camlib.py:3750 camlib.py:4352 camlib.py:4611 camlib.py:5631 camlib.py:6054
msgid "The Cut Z parameter is zero. There will be no cut, skipping file"
msgstr ""

#: camlib.py:3755 camlib.py:5636 camlib.py:6060
msgid "Travel Z parameter is None or zero."
msgstr ""

#: camlib.py:3760 camlib.py:5641 camlib.py:6066
msgid ""
"The Travel Z parameter has negative value. It is the height value to travel between "
"cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo therefore "
"the app will convert the value to positive.Check the resulting CNC code (Gcode etc)."
msgstr ""

#: camlib.py:3768 camlib.py:5649 camlib.py:6074
msgid "The Z Travel parameter is zero. This is dangerous, skipping file"
msgstr ""

#: camlib.py:4049 camlib.py:5484 camlib.py:5815 camlib.py:6260
msgid "Finished G-Code generation"
msgstr ""

#: camlib.py:4049 camlib.py:5815 camlib.py:6260 camlib.py:6383
msgid "paths traced"
msgstr ""

#: camlib.py:4108
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y) \n"
"but now there is only one value, not two. "
msgstr ""

#: camlib.py:4120 camlib.py:5578 camlib.py:6002
msgid ""
"The End Move X,Y field in Edit -> Preferences has to be in the format (x, y) but now "
"there is only one value, not two."
msgstr ""

#: camlib.py:4240
msgid "Failed. Drill points inside the exclusion zones."
msgstr ""

#: camlib.py:5601
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y) \n"
"but now there is only one value, not two."
msgstr ""

#: camlib.py:5870
msgid "Trying to generate a CNC Job from a Geometry object without solid_geometry."
msgstr ""

#: camlib.py:5921
msgid ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""

#: camlib.py:6291
msgid "There is no tool data in the SolderPaste geometry."
msgstr ""

#: camlib.py:6383
msgid "Finished SolderPaste G-Code generation"
msgstr ""

#: camlib.py:6735
msgid "Parsing GCode file. Number of lines"
msgstr ""

#: camlib.py:6847
msgid "Creating Geometry from the parsed GCode file. "
msgstr ""

#: camlib.py:6904
msgid "Parsing GCode file for tool diameter"
msgstr ""

#: camlib.py:6905
msgid "Number of lines"
msgstr ""

#: camlib.py:6994
msgid "Creating Geometry from the parsed GCode file for tool diameter"
msgstr ""

#: camlib.py:7758
msgid "G91 coordinates not implemented ..."
msgstr ""

#: defaults.py:961 defaults.py:1132
msgid "Failed to parse defaults file."
msgstr ""

#: tclCommands/TclCommandBbox.py:75 tclCommands/TclCommandNregions.py:74
msgid "Expected GerberObject or GeometryObject, got"
msgstr ""

#: tclCommands/TclCommandBounds.py:67 tclCommands/TclCommandBounds.py:71
msgid "Expected a list of objects names separated by comma. Got"
msgstr ""

#: tclCommands/TclCommandBounds.py:81
msgid "TclCommand Bounds done."
msgstr ""

#: tclCommands/TclCommandBuffer.py:97
msgid "Expected -dist <value>"
msgstr ""

#: tclCommands/TclCommandCopperClear.py:276
msgid "Expected either -box <value> or -all."
msgstr ""

#: tclCommands/TclCommandDrillcncjob.py:210
msgid "Tool_nr"
msgstr ""

#: tclCommands/TclCommandDrillcncjob.py:210
msgid "Drills_Nr"
msgstr ""

#: tclCommands/TclCommandDrillcncjob.py:210
msgid "Slots_Nr"
msgstr ""

#: tclCommands/TclCommandGeoCutout.py:142
msgid "The name of the object for which cutout is done is missing. Add it and retry."
msgstr ""

#: tclCommands/TclCommandGeoCutout.py:186
msgid ""
"Gaps value can be only one of: 'none', 'lr', 'tb', '2lr', '2tb', 4 or 8.\n"
"Fill in a correct value and retry."
msgstr ""

#: tclCommands/TclCommandGeoCutout.py:218
msgid "Cancelled. Object type is not supported."
msgstr ""

#: tclCommands/TclCommandHelp.py:75
msgid "Available commands:"
msgstr ""

#: tclCommands/TclCommandHelp.py:115
msgid "Type help <command_name> for usage."
msgstr ""

#: tclCommands/TclCommandHelp.py:115
msgid "Example: help open_gerber"
msgstr ""

#: tclCommands/TclCommandPaint.py:231 tclCommands/TclCommandPaint.py:238
msgid "Expected a tuple value like -single 3.2,0.1."
msgstr ""

#: tclCommands/TclCommandPaint.py:263 tclCommands/TclCommandPaint.py:264
msgid "Expected -box <value>."
msgstr ""

#: tclCommands/TclCommandPaint.py:288
msgid ""
"None of the following args: 'box', 'single', 'all' were used.\n"
"Paint failed."
msgstr ""

#: tclCommands/TclCommandScale.py:137 tclCommands/TclCommandSkew.py:189
msgid ""
"Expected -origin <origin> or -origin <min_bounds> or -origin <center> or - origin 3.0,4.2."
msgstr ""

#: tclCommands/TclCommandSetOrigin.py:95
msgid "Expected a pair of (x, y) coordinates. Got"
msgstr ""

#: tclCommands/TclCommandSetOrigin.py:120
msgid "Origin set by offsetting all loaded objects with "
msgstr ""

#: tclCommands/TclCommandSubtractRectangle.py:62
msgid "No Geometry name in args. Provide a name and try again."
msgstr ""

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_cut = Z coord for Toolchange"
#~ msgstr "z_cut = Z coord for Toolchange"

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_move = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Project_%s"

#~ msgid "plugin_tab"
#~ msgstr "plugin_tab"