flatcam-wsl

__init__.py

- moved all the Levelling stuff out of the CNCjob Properties Tab to its own tool, Levelling Tool. The functionality itself is not finished yet.

2021-01-02 22:04:05 +02:00

ToolAlignObjects.py

- modified the behavior of the Tool Tab in the Notebook widget. Now the app start with the Tool Tab off. If an App Tool is launched then the Tool Tab is added and populated. If the same App Tool is launched again and the focus is in its Tool Tab then the Tool Tab is removed but if the focus is elsewhere then the focus is set again on the Tool Tab.

2020-11-16 01:56:35 +02:00

ToolCalculators.py

- replaced all usages of QFormLayout with QGridLayout

2020-12-31 18:03:43 +02:00

ToolCalibration.py

- all the logs done on Exception are now errors (with the exception of few places where the Exception is expected)

2020-12-31 05:56:46 +02:00

ToolCopperThieving.py

- all the logs done on Exception are now errors (with the exception of few places where the Exception is expected)

2020-12-31 05:56:46 +02:00

ToolCorners.py

- allowed some more parameters to have negative values (tool diameters especially)

2021-01-06 15:05:22 +02:00

ToolCutOut.py

- changing some parameters from 'geometry_' to 'tools_mill_' format

2021-01-05 06:20:13 +02:00

ToolDblSided.py

- all the logs done on Exception are now errors (with the exception of few places where the Exception is expected)

2020-12-31 05:56:46 +02:00

ToolDistance.py

- all the logs done on Exception are now errors (with the exception of few places where the Exception is expected)

2020-12-31 05:56:46 +02:00

ToolDistanceMin.py

- replaced all usages of QFormLayout with QGridLayout

2020-12-31 18:03:43 +02:00

ToolDrilling.py

- allowed some more parameters to have negative values (tool diameters especially)

2021-01-06 15:05:22 +02:00

ToolEtchCompensation.py

- modified the behavior of the Tool Tab in the Notebook widget. Now the app start with the Tool Tab off. If an App Tool is launched then the Tool Tab is added and populated. If the same App Tool is launched again and the focus is in its Tool Tab then the Tool Tab is removed but if the focus is elsewhere then the focus is set again on the Tool Tab.

2020-11-16 01:56:35 +02:00

ToolExtract.py

- all the logs done on Exception are now errors (with the exception of few places where the Exception is expected)

2020-12-31 05:56:46 +02:00

ToolFiducials.py

- for QRCode and Subtraction Tools added also a Beginner/Advanced mode

2021-01-06 15:34:20 +02:00

ToolFilm.py

- all the logs done on Exception are now errors (with the exception of few places where the Exception is expected)

2020-12-31 05:56:46 +02:00

ToolFollow.py

- allowed some more parameters to have negative values (tool diameters especially)

2021-01-06 15:05:22 +02:00

ToolImage.py

- replaced all usages of QFormLayout with QGridLayout

2020-12-31 18:03:43 +02:00

ToolInvertGerber.py

- modified the behavior of the Tool Tab in the Notebook widget. Now the app start with the Tool Tab off. If an App Tool is launched then the Tool Tab is added and populated. If the same App Tool is launched again and the focus is in its Tool Tab then the Tool Tab is removed but if the focus is elsewhere then the focus is set again on the Tool Tab.

2020-11-16 01:56:35 +02:00

ToolIsolation.py

- allowed some more parameters to have negative values (tool diameters especially)

2021-01-06 15:05:22 +02:00

ToolLevelling.py

- Levelling Tool - minor changes

2021-01-04 23:22:32 +02:00

ToolMilling.py

- allowed some more parameters to have negative values (tool diameters especially)

2021-01-06 15:05:22 +02:00

ToolMove.py

- all the logs done on Exception are now errors (with the exception of few places where the Exception is expected)

2020-12-31 05:56:46 +02:00

ToolNCC.py

- allowed some more parameters to have negative values (tool diameters especially)

2021-01-06 15:05:22 +02:00

ToolOptimal.py

- replaced all usages of QFormLayout with QGridLayout

2020-12-31 18:03:43 +02:00

ToolPaint.py

- allowed some more parameters to have negative values (tool diameters especially)

2021-01-06 15:05:22 +02:00

ToolPanelize.py

- allowed some more parameters to have negative values (tool diameters especially)

2021-01-06 15:05:22 +02:00

ToolPcbWizard.py

- replaced all usages of QFormLayout with QGridLayout

2020-12-31 18:03:43 +02:00

ToolPDF.py

- all the logs done on Exception are now errors (with the exception of few places where the Exception is expected)

2020-12-31 05:56:46 +02:00

ToolProperties.py

- all the logs done on Exception are now errors (with the exception of few places where the Exception is expected)

2020-12-31 05:56:46 +02:00

ToolPunchGerber.py

- allowed some more parameters to have negative values (tool diameters especially)

2021-01-06 15:05:22 +02:00

ToolQRCode.py

- for QRCode and Subtraction Tools added also a Beginner/Advanced mode

2021-01-06 15:34:20 +02:00

ToolRulesCheck.py

- replaced all usages of QFormLayout with QGridLayout

2020-12-31 18:03:43 +02:00

ToolShell.py

- fixed the Tcl Commands: new_geometry, new_gerber and new_excellon to create correct objects. New Geometry object created with the new_geometry Tcl command accept now the usage of add_circle/polygon/polyline/rectangle Tcl commands

2021-01-03 19:58:46 +02:00

ToolSolderPaste.py

- replaced all usages of QFormLayout with QGridLayout

2020-12-31 18:03:43 +02:00

ToolSub.py

- for QRCode and Subtraction Tools added also a Beginner/Advanced mode

2021-01-06 15:34:20 +02:00

ToolTransform.py

- all the logs done on Exception are now errors (with the exception of few places where the Exception is expected)

2020-12-31 05:56:46 +02:00