Marius Stanciu 67b0a81f17 - updated the Film Tool and added the ability to generate Punched Positive films (holes in the pads) when a Gerber file is the film's source. The punch holes source can be either an Excellon file or the pads center

2019-10-04 02:59:11 +03:00

..

__init__.py

- modified the Distance Tool such that the numbe of decimals all over the tool is set in one place by the self.decimals

2019-09-30 03:02:04 +03:00

ToolCalculators.py

- modified all the FlatCAM tools strings to the new format in which the status is no longer included in the translated strings to make it easier for the future translations

2019-09-06 21:02:08 +03:00

ToolCutOut.py

- fixed CutOut Tool to work in legacy graphic engine

2019-09-22 02:52:40 +03:00

ToolDblSided.py

- modified all the FlatCAM tools strings to the new format in which the status is no longer included in the translated strings to make it easier for the future translations

2019-09-06 21:02:08 +03:00

ToolDistance.py

- in Tool Distance and Tool Minimal Distance made the entry fields read-only

2019-09-30 04:58:26 +03:00

ToolDistanceMin.py

- in Tool Distance and Tool Minimal Distance made the entry fields read-only

2019-09-30 04:58:26 +03:00

ToolFilm.py

- updated the Film Tool and added the ability to generate Punched Positive films (holes in the pads) when a Gerber file is the film's source. The punch holes source can be either an Excellon file or the pads center

2019-10-04 02:59:11 +03:00

ToolImage.py

- for all the tools launched rom toolbar the behavior is modified: first click it will launch the tool; second click: if the Tool tab has focus it will close the tool but if another tab is selected, the tool will have focus

2019-08-23 19:30:33 +03:00

ToolMove.py

- preparing ToolMove to switch for multiprocessing

2019-10-03 01:47:03 +03:00

ToolNonCopperClear.py

- fixed issue #319 where generating a CNCJob from a geometry made with NCC Tool made the app crash

2019-09-28 23:58:23 +03:00

ToolOptimal.py

- in Optimal Tool added the display of the locations where the minimum distance was detected

2019-09-30 07:27:17 +03:00

ToolPaint.py

- fixed issue #319 where generating a CNCJob from a geometry made with NCC Tool made the app crash

2019-09-28 23:58:23 +03:00

ToolPanelize.py

- some strings changed to be easier for translation

2019-09-22 17:06:22 +03:00

ToolPcbWizard.py

- modified all the FlatCAM tools strings to the new format in which the status is no longer included in the translated strings to make it easier for the future translations

2019-09-06 21:02:08 +03:00

ToolPDF.py

- fixed some of the strings that were left in the old way

2019-09-13 18:27:00 +03:00

ToolProperties.py

- modified all the FlatCAM tools strings to the new format in which the status is no longer included in the translated strings to make it easier for the future translations

2019-09-06 21:02:08 +03:00

ToolRulesCheck.py

- changed the name of the new object FlatCAMNotes to a more general one FlatCAMDocument

2019-10-02 17:58:48 +03:00

ToolShell.py

- made --shellvars into --shellvar and make it only one list of commands passed to the Tcl. The list is separated by comma but without spaces. The variables are accessed in Tcl with the names shellvar_x where x is the index in the list of command comma separated values

2019-09-17 18:37:34 +03:00

ToolSolderPaste.py

- fixed bug in Geometry Editor that did not allow the copy of geometric elements

2019-10-02 05:47:18 +03:00

ToolSub.py

- some strings changed to be easier for translation

2019-09-22 17:06:22 +03:00

ToolTransform.py

- created the GUI for the Rule Check Tool

2019-09-28 00:34:18 +03:00