diff --git a/CHANGELOG.md b/CHANGELOG.md
index 73683e82..2b3f28ab 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -19,6 +19,9 @@ CHANGELOG for FlatCAM beta
 - updated the Turkish translation (by Mehmet Kaya)
 - small change in the CNCJob UI by replacing the AL checkbox with a checkable QButton
 - disabled the Autolevelling feature in CNCJob due of being not finished and missing also a not-yet-released package: Shapely v 1.8
+- added some new strings for translation and updated the translation strings
+- in ToolsDB2UI class made the vertical layouts have a preferred minimum dimension as opposed to the previous fixed one
+- in Geometry Object made sure that the Tools Table second column is set to Resize to contents
 
 21.10.2020
 
diff --git a/appDatabase.py b/appDatabase.py
index ee77d9a7..39011d73 100644
--- a/appDatabase.py
+++ b/appDatabase.py
@@ -993,7 +993,7 @@ class ToolsDB2UI:
         """)
         self.description_vlay = QtWidgets.QVBoxLayout()
         self.tool_description_box.setTitle(_("Tool Description"))
-        self.tool_description_box.setFixedWidth(250)
+        self.tool_description_box.setMinimumWidth(250)
 
         # Milling box
         self.milling_box = QtWidgets.QGroupBox()
@@ -1006,7 +1006,7 @@ class ToolsDB2UI:
         """)
         self.milling_vlay = QtWidgets.QVBoxLayout()
         self.milling_box.setTitle(_("Milling Parameters"))
-        self.milling_box.setFixedWidth(250)
+        self.milling_box.setMinimumWidth(250)
 
         # NCC TOOL BOX
         self.ncc_box = QtWidgets.QGroupBox()
@@ -1019,7 +1019,7 @@ class ToolsDB2UI:
                         """)
         self.ncc_vlay = QtWidgets.QVBoxLayout()
         self.ncc_box.setTitle(_("NCC Parameters"))
-        self.ncc_box.setFixedWidth(250)
+        self.ncc_box.setMinimumWidth(250)
 
         # PAINT TOOL BOX
         self.paint_box = QtWidgets.QGroupBox()
@@ -1032,7 +1032,7 @@ class ToolsDB2UI:
                         """)
         self.paint_vlay = QtWidgets.QVBoxLayout()
         self.paint_box.setTitle(_("Paint Parameters"))
-        self.paint_box.setFixedWidth(250)
+        self.paint_box.setMinimumWidth(250)
 
         # ISOLATION TOOL BOX
         self.iso_box = QtWidgets.QGroupBox()
@@ -1045,7 +1045,7 @@ class ToolsDB2UI:
                      """)
         self.iso_vlay = QtWidgets.QVBoxLayout()
         self.iso_box.setTitle(_("Isolation Parameters"))
-        self.iso_box.setFixedWidth(250)
+        self.iso_box.setMinimumWidth(250)
 
         # DRILLING TOOL BOX
         self.drill_box = QtWidgets.QGroupBox()
@@ -1058,7 +1058,7 @@ class ToolsDB2UI:
                      """)
         self.drill_vlay = QtWidgets.QVBoxLayout()
         self.drill_box.setTitle(_("Drilling Parameters"))
-        self.drill_box.setFixedWidth(250)
+        self.drill_box.setMinimumWidth(250)
 
         # CUTOUT TOOL BOX
         self.cutout_box = QtWidgets.QGroupBox()
@@ -1071,7 +1071,7 @@ class ToolsDB2UI:
                      """)
         self.cutout_vlay = QtWidgets.QVBoxLayout()
         self.cutout_box.setTitle(_("Cutout Parameters"))
-        self.cutout_box.setFixedWidth(250)
+        self.cutout_box.setMinimumWidth(250)
 
         # Layout Constructor
         self.tool_description_box.setLayout(self.description_vlay)
diff --git a/appEditors/AppGeoEditor.py b/appEditors/AppGeoEditor.py
index 9fb257cc..989c271d 100644
--- a/appEditors/AppGeoEditor.py
+++ b/appEditors/AppGeoEditor.py
@@ -310,7 +310,7 @@ class TextInputTool(AppTool):
         self.font_italic_tb.setIcon(QtGui.QIcon(self.app.resource_location + '/italic32.png'))
         hlay.addWidget(self.font_italic_tb)
 
-        self.form_layout.addRow(FCLabel('%s:' % "Size"), hlay)
+        self.form_layout.addRow(FCLabel('%s:' % _("Size")), hlay)
 
         # Text input
         self.text_input_entry = FCTextAreaRich()
diff --git a/appGUI/MainGUI.py b/appGUI/MainGUI.py
index d864c0a3..a7c89c73 100644
--- a/appGUI/MainGUI.py
+++ b/appGUI/MainGUI.py
@@ -909,7 +909,7 @@ class MainGUI(QtWidgets.QMainWindow):
         # ########################## Shell Toolbar# ##############################
         # ########################################################################
         self.shell_btn = self.toolbarshell.addAction(
-            QtGui.QIcon(self.app.resource_location + '/shell32.png'), _("&Command Line"))
+            QtGui.QIcon(self.app.resource_location + '/shell32.png'), _("Command Line"))
         self.new_script_btn = self.toolbarshell.addAction(
             QtGui.QIcon(self.app.resource_location + '/script_new24.png'), _('New Script ...'))
         self.open_script_btn = self.toolbarshell.addAction(
@@ -1191,7 +1191,7 @@ class MainGUI(QtWidgets.QMainWindow):
         # #######################################################################
         # ####################### TCL Shell DOCK ################################
         # #######################################################################
-        self.shell_dock = FCDock("TCL Shell", close_callback=self.toggle_shell_ui)
+        self.shell_dock = FCDock(_("TCL Shell"), close_callback=self.toggle_shell_ui)
         self.shell_dock.setObjectName('Shell_DockWidget')
         self.shell_dock.setAllowedAreas(QtCore.Qt.AllDockWidgetAreas)
         self.shell_dock.setFeatures(QtWidgets.QDockWidget.DockWidgetMovable |
@@ -3788,13 +3788,13 @@ class MainGUI(QtWidgets.QMainWindow):
         try:
             name = self.plot_tab_area.widget(0).objectName()
         except AttributeError:
-            self.plot_tab_area.addTab(self.plot_tab, "Plot Area")
+            self.plot_tab_area.addTab(self.plot_tab, _("Plot Area"))
             # remove the close button from the Plot Area tab (first tab index = 0) as this one will always be ON
             self.plot_tab_area.protectTab(0)
             return
 
         if name != 'plotarea_tab':
-            self.plot_tab_area.insertTab(0, self.plot_tab, "Plot Area")
+            self.plot_tab_area.insertTab(0, self.plot_tab, _("Plot Area"))
             # remove the close button from the Plot Area tab (first tab index = 0) as this one will always be ON
             self.plot_tab_area.protectTab(0)
         else:
diff --git a/appObjects/FlatCAMGeometry.py b/appObjects/FlatCAMGeometry.py
index 89470d77..a653e3d6 100644
--- a/appObjects/FlatCAMGeometry.py
+++ b/appObjects/FlatCAMGeometry.py
@@ -269,6 +269,7 @@ class GeometryObject(FlatCAMObj, Geometry):
         horizontal_header.resizeSection(0, 20)
         horizontal_header.setSectionResizeMode(1, QtWidgets.QHeaderView.Stretch)
         # horizontal_header.setColumnWidth(2, QtWidgets.QHeaderView.ResizeToContents)
+        horizontal_header.setSectionResizeMode(2, QtWidgets.QHeaderView.ResizeToContents)
         horizontal_header.setSectionResizeMode(3, QtWidgets.QHeaderView.ResizeToContents)
         horizontal_header.setSectionResizeMode(4, QtWidgets.QHeaderView.Fixed)
         horizontal_header.resizeSection(4, 40)
diff --git a/appTools/ToolShell.py b/appTools/ToolShell.py
index 914af03e..2fda01df 100644
--- a/appTools/ToolShell.py
+++ b/appTools/ToolShell.py
@@ -290,7 +290,7 @@ class FCShell(TermWidget):
 
         self._edit.set_model_data(self.app.myKeywords)
         self.setWindowIcon(self.app.ui.app_icon)
-        self.setWindowTitle("FlatCAM Shell")
+        self.setWindowTitle(_("FlatCAM Shell"))
         self.resize(*self.app.defaults["global_shell_shape"])
         self._append_to_browser('in', "FlatCAM %s - " % version)
         self.append_output('%s\n\n' % _("Type >help< to get started"))
diff --git a/app_Main.py b/app_Main.py
index 16c90adc..a631864c 100644
--- a/app_Main.py
+++ b/app_Main.py
@@ -2258,7 +2258,7 @@ class App(QtCore.QObject):
         else:
             self.old_state_of_tools_toolbar = False
 
-        self.ui.plot_tab_area.setTabText(0, "EDITOR Area")
+        self.ui.plot_tab_area.setTabText(0, _("EDITOR Area"))
         self.ui.plot_tab_area.protectTab(0)
         self.inform.emit('[WARNING_NOTCL] %s' % _("Editor is activated ..."))
 
diff --git a/locale/de/LC_MESSAGES/strings.mo b/locale/de/LC_MESSAGES/strings.mo
index 904768ca..8ed1f25e 100644
Binary files a/locale/de/LC_MESSAGES/strings.mo and b/locale/de/LC_MESSAGES/strings.mo differ
diff --git a/locale/de/LC_MESSAGES/strings.po b/locale/de/LC_MESSAGES/strings.po
index 27877608..e087fcd4 100644
--- a/locale/de/LC_MESSAGES/strings.po
+++ b/locale/de/LC_MESSAGES/strings.po
@@ -1,8 +1,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
-"POT-Creation-Date: 2020-10-22 15:07+0300\n"
-"PO-Revision-Date: 2020-10-22 15:07+0300\n"
+"POT-Creation-Date: 2020-10-22 22:01+0300\n"
+"PO-Revision-Date: 2020-10-22 22:01+0300\n"
 "Last-Translator: \n"
 "Language-Team: \n"
 "Language: de\n"
@@ -104,7 +104,7 @@ msgstr "Lesezeichen"
 #: appDatabase.py:2998 appDatabase.py:3044 appEditors/AppExcEditor.py:1023
 #: appEditors/AppExcEditor.py:1091 appEditors/AppTextEditor.py:263
 #: appGUI/MainGUI.py:2878 appGUI/MainGUI.py:3100 appGUI/MainGUI.py:3315
-#: appObjects/FlatCAMCNCJob.py:1745 appObjects/ObjectCollection.py:126
+#: appObjects/FlatCAMCNCJob.py:1750 appObjects/ObjectCollection.py:126
 #: appTools/ToolFilm.py:238 appTools/ToolFilm.py:384 appTools/ToolImage.py:112
 #: appTools/ToolMove.py:269 appTools/ToolPcbWizard.py:189
 #: appTools/ToolPcbWizard.py:212 appTools/ToolQRCode.py:526
@@ -120,8 +120,8 @@ msgid "Cancelled."
 msgstr "Abgebrochen."
 
 #: Bookmark.py:308 appDatabase.py:673 appDatabase.py:3006
-#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1667
-#: appObjects/FlatCAMCNCJob.py:1857 appObjects/FlatCAMCNCJob.py:2306
+#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1672
+#: appObjects/FlatCAMCNCJob.py:1862 appObjects/FlatCAMCNCJob.py:2311
 #: appTools/ToolFilm.py:582 appTools/ToolFilm.py:830
 #: appTools/ToolSolderPaste.py:1097 app_Main.py:2666 app_Main.py:8451
 #: app_Main.py:8499 app_Main.py:8628 app_Main.py:8765 app_Main.py:8833
@@ -159,18 +159,18 @@ msgstr ""
 "angefordert."
 
 #: appCommon/Common.py:292 appTools/ToolCopperThieving.py:328
-#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1364
+#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1366
 msgid "Click the start point of the area."
 msgstr "Klicken Sie auf den Startpunkt des Bereichs."
 
-#: appCommon/Common.py:351 appTools/ToolNCC.py:1423 appTools/ToolPaint.py:1210
+#: appCommon/Common.py:351 appTools/ToolNCC.py:1425 appTools/ToolPaint.py:1210
 msgid "Click the end point of the area."
 msgstr "Klicken Sie auf den Endpunkt des Bereichs."
 
 #: appCommon/Common.py:357 appCommon/Common.py:459
 #: appTools/ToolCopperThieving.py:385 appTools/ToolIsolation.py:2348
-#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1429
-#: appTools/ToolNCC.py:1481 appTools/ToolPaint.py:1216
+#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1431
+#: appTools/ToolNCC.py:1483 appTools/ToolPaint.py:1216
 #: appTools/ToolPaint.py:1267
 msgid "Zone added. Click to start adding next zone or right click to finish."
 msgstr ""
@@ -178,7 +178,7 @@ msgstr ""
 "klicken Sie mit der rechten Maustaste, um den Vorgang abzuschließen."
 
 #: appCommon/Common.py:404 appEditors/AppGeoEditor.py:2352
-#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1452
+#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1454
 #: appTools/ToolPaint.py:1238
 msgid "Click on next Point or click right mouse button to complete ..."
 msgstr ""
@@ -285,7 +285,7 @@ msgstr "Werkzeugname"
 #: appGUI/ObjectUI.py:1082 appGUI/ObjectUI.py:1650
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:130
 #: appTools/ToolCutOut.py:2060 appTools/ToolIsolation.py:3091
-#: appTools/ToolNCC.py:3906 appTools/ToolNCC.py:3917 appTools/ToolPaint.py:2882
+#: appTools/ToolNCC.py:3966 appTools/ToolNCC.py:3977 appTools/ToolPaint.py:2882
 msgid "Tool Dia"
 msgstr "Werkzeugdurchm"
 
@@ -713,13 +713,13 @@ msgstr ""
 #: appDatabase.py:307 appDatabase.py:684 appDatabase.py:718 appDatabase.py:2647
 #: appDatabase.py:3017 appDatabase.py:3051 appTools/ToolCutOut.py:294
 #: appTools/ToolDrilling.py:895 appTools/ToolIsolation.py:1067
-#: appTools/ToolNCC.py:1009 appTools/ToolPaint.py:704
+#: appTools/ToolNCC.py:1011 appTools/ToolPaint.py:704
 msgid "Could not load Tools DB file."
 msgstr "Werkzeugdatenbank konnte nicht geladen werden."
 
 #: appDatabase.py:315 appDatabase.py:726 appDatabase.py:2655
 #: appDatabase.py:3059 appTools/ToolCutOut.py:305 appTools/ToolDrilling.py:903
-#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1020
+#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1022
 #: appTools/ToolPaint.py:715
 msgid "Failed to parse Tools DB file."
 msgstr "Formatfehler beim Einlesen der Werkzeugdatenbank."
@@ -778,7 +778,7 @@ msgstr "Import der FlatCAM-Werkzeugdatenbank"
 #: appDatabase.py:3464 appObjects/FlatCAMGeometry.py:1089
 #: appTools/ToolCutOut.py:484 appTools/ToolCutOut.py:525
 #: appTools/ToolIsolation.py:2583 appTools/ToolIsolation.py:2667
-#: appTools/ToolNCC.py:3655 appTools/ToolNCC.py:3735 appTools/ToolPaint.py:2626
+#: appTools/ToolNCC.py:3715 appTools/ToolNCC.py:3795 appTools/ToolPaint.py:2626
 #: appTools/ToolPaint.py:2715 app_Main.py:5676 app_Main.py:5718
 #: app_Main.py:5749 app_Main.py:5769 app_Main.py:5779
 msgid "Tools Database"
@@ -835,7 +835,7 @@ msgstr "Schlitze-Parameter"
 
 #: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
 #: appGUI/ObjectUI.py:570 appGUI/ObjectUI.py:894 appGUI/ObjectUI.py:1876
-#: appGUI/ObjectUI.py:2681 appGUI/ObjectUI.py:2748
+#: appGUI/ObjectUI.py:2693 appGUI/ObjectUI.py:2760
 #: appTools/ToolCalibration.py:929 appTools/ToolFiducials.py:681
 msgid "Name"
 msgstr "Name"
@@ -848,7 +848,7 @@ msgstr "Name"
 #: appTools/ToolDrilling.py:2065 appTools/ToolIsolation.py:3022
 #: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
 #: appTools/ToolMilling.py:1360 appTools/ToolMilling.py:1670
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 #: appTools/ToolPcbWizard.py:404 appTools/ToolProperties.py:417
 #: appTools/ToolProperties.py:480 appTools/ToolSolderPaste.py:1166
 #: tclCommands/TclCommandDrillcncjob.py:195
@@ -887,7 +887,7 @@ msgstr ""
 
 #: appDatabase.py:1186 appDatabase.py:1504
 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46
-#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:3990
+#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:4050
 msgid "Operation"
 msgstr "Operation"
 
@@ -914,7 +914,7 @@ msgstr "Bohren"
 
 #: appDatabase.py:1192 appDatabase.py:1514 appDatabase.py:2761
 #: appDatabase.py:3095 appTools/ToolIsolation.py:1101
-#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4000
+#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4060
 msgid "Isolation"
 msgstr "Isolation"
 
@@ -925,7 +925,7 @@ msgid "Paint"
 msgstr "Malen"
 
 #: appDatabase.py:1192 appDatabase.py:2773 appDatabase.py:3111
-#: appTools/ToolNCC.py:1044 appTools/ToolNCC.py:3648
+#: appTools/ToolNCC.py:1046 appTools/ToolNCC.py:3708
 #, fuzzy
 #| msgid "CCW"
 msgid "NCC"
@@ -944,7 +944,7 @@ msgstr "Ausschnitt PCB"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:303
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:284
-#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4283
+#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4343
 #: appTools/ToolPaint.py:3163
 msgid "Shape"
 msgstr "Form"
@@ -982,7 +982,7 @@ msgstr ""
 "Vorschub Z.\n"
 "Die Geschwindigkeit in der Z-Ebene."
 
-#: appDatabase.py:1506 appTools/ToolNCC.py:3992
+#: appDatabase.py:1506 appTools/ToolNCC.py:4052
 msgid ""
 "The 'Operation' can be:\n"
 "- Isolation -> will ensure that the non-copper clearing is always complete.\n"
@@ -996,7 +996,7 @@ msgstr ""
 "- Klären-> das reguläre Nicht-Kupfer-löschen."
 
 #: appDatabase.py:1513 appEditors/AppGerberEditor.py:2749
-#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:3999
+#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:4059
 msgid "Clear"
 msgstr "Klären"
 
@@ -1006,7 +1006,7 @@ msgstr "Klären"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137
 #: appTools/ToolIsolation.py:3204 appTools/ToolMilling.py:1760
-#: appTools/ToolNCC.py:4008
+#: appTools/ToolNCC.py:4068
 msgid "Milling Type"
 msgstr "Fräsart"
 
@@ -1016,7 +1016,7 @@ msgstr "Fräsart"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147
 #: appTools/ToolIsolation.py:3206 appTools/ToolIsolation.py:3214
-#: appTools/ToolNCC.py:4010 appTools/ToolNCC.py:4018
+#: appTools/ToolNCC.py:4070 appTools/ToolNCC.py:4078
 msgid ""
 "Milling type when the selected tool is of type: 'iso_op':\n"
 "- climb / best for precision milling and to reduce tool usage\n"
@@ -1031,7 +1031,7 @@ msgstr ""
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144
-#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4015
+#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4075
 msgid "Climb"
 msgstr "Steigen"
 
@@ -1040,7 +1040,7 @@ msgstr "Steigen"
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:190
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145
-#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4016
+#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4076
 msgid "Conventional"
 msgstr "Konventionell"
 
@@ -1051,13 +1051,13 @@ msgstr "Konventionell"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:161
 #: appTools/ToolDrilling.py:2312 appTools/ToolIsolation.py:3189
-#: appTools/ToolNCC.py:4031 appTools/ToolPaint.py:2955
+#: appTools/ToolNCC.py:4091 appTools/ToolPaint.py:2955
 msgid "Overlap"
 msgstr "Überlappung"
 
 # Double
 #: appDatabase.py:1544 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
-#: appTools/ToolNCC.py:4033
+#: appTools/ToolNCC.py:4093
 msgid ""
 "How much (percentage) of the tool width to overlap each tool pass.\n"
 "Adjust the value starting with lower values\n"
@@ -1089,8 +1089,8 @@ msgstr ""
 #: appTools/ToolCopperThieving.py:1204 appTools/ToolCopperThieving.py:1455
 #: appTools/ToolCorners.py:411 appTools/ToolCutOut.py:2157
 #: appTools/ToolFiducials.py:786 appTools/ToolInvertGerber.py:234
-#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4075
-#: appTools/ToolNCC.py:4178
+#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4135
+#: appTools/ToolNCC.py:4238
 msgid "Margin"
 msgstr "Marge"
 
@@ -1101,25 +1101,25 @@ msgstr "Marge"
 #: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204
 #: appTools/ToolCopperThieving.py:1206 appTools/ToolCorners.py:413
-#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4077
-#: appTools/ToolNCC.py:4180
+#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4137
+#: appTools/ToolNCC.py:4240
 msgid "Bounding box margin."
 msgstr "Begrenzungsrahmenrand."
 
 #: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
-#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2172
+#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2184
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
 #: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:196
-#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4052
+#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4112
 #: appTools/ToolPaint.py:2991 appTools/ToolPunchGerber.py:793
 msgid "Method"
 msgstr "Methode"
 
 #: appDatabase.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
-#: appTools/ToolNCC.py:4054
+#: appTools/ToolNCC.py:4114
 msgid ""
 "Algorithm for copper clearing:\n"
 "- Standard: Fixed step inwards.\n"
@@ -1134,7 +1134,7 @@ msgstr ""
 #: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1963 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1456
+#: appTools/ToolNCC.py:1965 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1456
 #: appTools/ToolPaint.py:3016 defaults.py:346
 #: tclCommands/TclCommandCopperClear.py:126
 #: tclCommands/TclCommandCopperClear.py:134 tclCommands/TclCommandPaint.py:125
@@ -1145,7 +1145,7 @@ msgstr "Standard"
 #: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1974 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1470
+#: appTools/ToolNCC.py:1976 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1470
 #: appTools/ToolPaint.py:3016 defaults.py:469 defaults.py:507
 #: tclCommands/TclCommandCopperClear.py:128
 #: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
@@ -1156,7 +1156,7 @@ msgstr "Keim"
 #: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1702
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1985 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:160
+#: appTools/ToolNCC.py:1987 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:160
 #: appTools/ToolPaint.py:1484 appTools/ToolPaint.py:3016
 #: tclCommands/TclCommandCopperClear.py:130 tclCommands/TclCommandPaint.py:129
 msgid "Lines"
@@ -1165,24 +1165,24 @@ msgstr "Linien"
 #: appDatabase.py:1586 appDatabase.py:1701
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1996 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1649
+#: appTools/ToolNCC.py:1998 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1649
 #: appTools/ToolPaint.py:3016 tclCommands/TclCommandPaint.py:133
 msgid "Combo"
 msgstr "Combo"
 
 #: appDatabase.py:1594 appDatabase.py:1712 appEditors/AppGeoEditor.py:505
-#: appGUI/ObjectUI.py:2257 appGUI/ObjectUI.py:2280
+#: appGUI/ObjectUI.py:2269 appGUI/ObjectUI.py:2292
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:222
-#: appObjects/FlatCAMCNCJob.py:1300 appObjects/FlatCAMCNCJob.py:1322
-#: appTools/ToolNCC.py:4088 appTools/ToolNCC.py:4191 appTools/ToolPaint.py:3027
+#: appObjects/FlatCAMCNCJob.py:1305 appObjects/FlatCAMCNCJob.py:1327
+#: appTools/ToolNCC.py:4148 appTools/ToolNCC.py:4251 appTools/ToolPaint.py:3027
 msgid "Connect"
 msgstr "Verbinden"
 
 #: appDatabase.py:1598 appDatabase.py:1715 appEditors/AppGeoEditor.py:507
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
-#: appTools/ToolNCC.py:4092 appTools/ToolNCC.py:4193 appTools/ToolPaint.py:3030
+#: appTools/ToolNCC.py:4152 appTools/ToolNCC.py:4253 appTools/ToolPaint.py:3030
 msgid ""
 "Draw lines between resulting\n"
 "segments to minimize tool lifts."
@@ -1193,14 +1193,14 @@ msgstr ""
 #: appDatabase.py:1604 appDatabase.py:1719 appEditors/AppGeoEditor.py:515
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:230
-#: appTools/ToolNCC.py:4098 appTools/ToolNCC.py:4199 appTools/ToolPaint.py:3034
+#: appTools/ToolNCC.py:4158 appTools/ToolNCC.py:4259 appTools/ToolPaint.py:3034
 msgid "Contour"
 msgstr "Kontur"
 
 #: appDatabase.py:1608 appDatabase.py:1722 appEditors/AppGeoEditor.py:517
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232
-#: appTools/ToolNCC.py:4102 appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3037
+#: appTools/ToolNCC.py:4162 appTools/ToolNCC.py:4261 appTools/ToolPaint.py:3037
 msgid ""
 "Cut around the perimeter of the polygon\n"
 "to trim rough edges."
@@ -1214,13 +1214,13 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
 #: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
-#: appTools/ToolNCC.py:4108 appTools/ToolNCC.py:4207 appTools/ToolPaint.py:2976
+#: appTools/ToolNCC.py:4168 appTools/ToolNCC.py:4267 appTools/ToolPaint.py:2976
 #: appTools/ToolPaint.py:3083 appTools/ToolTransform.py:517
 msgid "Offset"
 msgstr "Versatz"
 
 #: appDatabase.py:1618 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
-#: appTools/ToolNCC.py:4112 appTools/ToolNCC.py:4209
+#: appTools/ToolNCC.py:4172 appTools/ToolNCC.py:4269
 msgid ""
 "If used, it will add an offset to the copper features.\n"
 "The copper clearing will finish to a distance\n"
@@ -1715,7 +1715,7 @@ msgstr ""
 #: appTools/ToolInvertGerber.py:304 appTools/ToolInvertGerber.py:315
 #: appTools/ToolIsolation.py:3494 appTools/ToolIsolation.py:3505
 #: appTools/ToolMilling.py:2341 appTools/ToolMilling.py:2352
-#: appTools/ToolNCC.py:4448 appTools/ToolNCC.py:4459
+#: appTools/ToolNCC.py:4508 appTools/ToolNCC.py:4519
 #: appTools/ToolOptimal.py:614 appTools/ToolOptimal.py:625
 #: appTools/ToolPaint.py:3267 appTools/ToolPaint.py:3278
 #: appTools/ToolPanelize.py:914 appTools/ToolPanelize.py:925
@@ -1751,7 +1751,7 @@ msgstr "Der bearbeitete Wert liegt außerhalb des Bereichs"
 #: appTools/ToolInvertGerber.py:310 appTools/ToolInvertGerber.py:317
 #: appTools/ToolIsolation.py:3500 appTools/ToolIsolation.py:3507
 #: appTools/ToolMilling.py:2347 appTools/ToolMilling.py:2354
-#: appTools/ToolNCC.py:4454 appTools/ToolNCC.py:4461
+#: appTools/ToolNCC.py:4514 appTools/ToolNCC.py:4521
 #: appTools/ToolOptimal.py:620 appTools/ToolOptimal.py:627
 #: appTools/ToolPaint.py:3273 appTools/ToolPaint.py:3280
 #: appTools/ToolPanelize.py:920 appTools/ToolPanelize.py:927
@@ -1910,8 +1910,8 @@ msgstr "Schlitz insgesamt"
 #: appEditors/AppExcEditor.py:2003 appObjects/FlatCAMGeometry.py:706
 #: appObjects/FlatCAMGeometry.py:1232 appObjects/FlatCAMGeometry.py:1974
 #: appObjects/FlatCAMGeometry.py:2633 appTools/ToolIsolation.py:1252
-#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1195
-#: appTools/ToolNCC.py:1332 appTools/ToolPaint.py:889
+#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1197
+#: appTools/ToolNCC.py:1334 appTools/ToolPaint.py:889
 #: appTools/ToolPaint.py:1027 appTools/ToolPaint.py:1740
 #: appTools/ToolSolderPaste.py:455 appTools/ToolSolderPaste.py:527
 msgid "Wrong value format entered, use a number."
@@ -1998,7 +1998,7 @@ msgstr "Name:"
 
 #: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:620
 #: appGUI/ObjectUI.py:967 appTools/ToolIsolation.py:3010
-#: appTools/ToolNCC.py:3813 appTools/ToolPaint.py:2800
+#: appTools/ToolNCC.py:3873 appTools/ToolPaint.py:2800
 #: appTools/ToolSolderPaste.py:1155
 msgid "Tools Table"
 msgstr "Werkzeugtabelle"
@@ -2035,7 +2035,7 @@ msgstr ""
 
 #: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1084
 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
-#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3908
+#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3968
 msgid "Diameter for the new tool"
 msgstr "Durchmesser für das neue Werkzeug"
 
@@ -2413,7 +2413,7 @@ msgstr "Runden"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:289
 #: appTools/ToolDrilling.py:2588 appTools/ToolExtractDrills.py:486
 #: appTools/ToolExtractDrills.py:619 appTools/ToolIsolation.py:3430
-#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4288
+#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4348
 #: appTools/ToolPaint.py:3168 appTools/ToolPunchGerber.py:759
 #: appTools/ToolPunchGerber.py:909 appTools/ToolQRCode.py:788
 msgid "Square"
@@ -2460,6 +2460,17 @@ msgstr "Textwerkzeug"
 msgid "Font"
 msgstr "Schrift"
 
+#: appEditors/AppGeoEditor.py:313 appEditors/AppGerberEditor.py:2495
+#: appEditors/AppGerberEditor.py:3968 appGUI/ObjectUI.py:316
+#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
+#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
+#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
+#: appTools/ToolFiducials.py:770
+msgid "Size"
+msgstr "Größe"
+
 #: appEditors/AppGeoEditor.py:322 appGUI/MainGUI.py:1502
 msgid "Text"
 msgstr "Text"
@@ -2479,7 +2490,7 @@ msgstr "Textwerkzeug"
 #: appTools/ToolIsolation.py:697 appTools/ToolIsolation.py:3166
 #: appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
 #: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:329
-#: appTools/ToolNCC.py:2278 appTools/ToolNCC.py:3980 appTools/ToolPaint.py:304
+#: appTools/ToolNCC.py:2280 appTools/ToolNCC.py:4040 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:2940
 msgid "Tool"
 msgstr "Werkzeug"
@@ -2607,7 +2618,7 @@ msgstr "Ursprung"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:256
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
-#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4244
+#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4304
 #: appTools/ToolPaint.py:3097 appTools/ToolTransform.py:557 defaults.py:566
 msgid "Selection"
 msgstr "Auswahl"
@@ -2643,7 +2654,7 @@ msgid "A point of reference in format X,Y."
 msgstr "Ein Bezugspunkt im Format X, Y."
 
 #: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
-#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2338
+#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2350
 #: appTools/ToolDblSided.py:706 appTools/ToolDblSided.py:892
 #: appTools/ToolNCC.py:63 appTools/ToolPaint.py:137
 #: appTools/ToolSolderPaste.py:160 appTools/ToolSolderPaste.py:1203
@@ -2949,7 +2960,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70
 #: appTools/ToolCalibration.py:881 appTools/ToolDrilling.py:2540
 #: appTools/ToolFilm.py:931 appTools/ToolMilling.py:2218
-#: appTools/ToolNCC.py:3802 appTools/ToolPaint.py:2788
+#: appTools/ToolNCC.py:3862 appTools/ToolPaint.py:2788
 #: appTools/ToolPanelize.py:697 appTools/ToolTransform.py:557
 msgid "Object"
 msgstr "Objekt"
@@ -3365,7 +3376,7 @@ msgstr "Linie"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290
 #: appTools/ToolDrilling.py:2589 appTools/ToolIsolation.py:3431
-#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4289
+#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4349
 #: appTools/ToolPaint.py:3169
 msgid "Polygon"
 msgstr "Polygon"
@@ -3400,7 +3411,7 @@ msgstr "Klicken Sie auf den Zielpunkt."
 msgid "Editing MultiGeo Geometry, tool"
 msgstr "Bearbeiten von MultiGeo Geometry, Werkzeug"
 
-#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2280
+#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2282
 msgid "with diameter"
 msgstr "mit Durchmesser"
 
@@ -3629,17 +3640,6 @@ msgstr "Blendentabelle für das Gerberobjekt."
 msgid "Code"
 msgstr "Code"
 
-#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:316
-#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
-#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
-#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
-#: appTools/ToolFiducials.py:770
-msgid "Size"
-msgstr "Größe"
-
 #: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
 #: appGUI/ObjectUI.py:316
 msgid "Dim"
@@ -3742,7 +3742,7 @@ msgstr "Fügen Sie der Blendenliste eine neue Blende hinzu."
 #: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1132
 #: appObjects/FlatCAMGeometry.py:560 appTools/ToolIsolation.py:70
 #: appTools/ToolIsolation.py:3150 appTools/ToolNCC.py:69
-#: appTools/ToolNCC.py:3964 appTools/ToolPaint.py:143
+#: appTools/ToolNCC.py:4024 appTools/ToolPaint.py:143
 #: appTools/ToolPaint.py:2926 appTools/ToolSolderPaste.py:163
 #: appTools/ToolSolderPaste.py:1209 app_Main.py:6123
 msgid "Delete"
@@ -4171,20 +4171,20 @@ msgid "Open file"
 msgstr "Datei öffnen"
 
 #: appEditors/AppTextEditor.py:255 appEditors/AppTextEditor.py:260
-#: appObjects/FlatCAMCNCJob.py:1641 appObjects/FlatCAMCNCJob.py:1646
-#: appObjects/FlatCAMCNCJob.py:1831 appObjects/FlatCAMCNCJob.py:1836
-#: appObjects/FlatCAMCNCJob.py:1909 appObjects/FlatCAMCNCJob.py:1914
+#: appObjects/FlatCAMCNCJob.py:1646 appObjects/FlatCAMCNCJob.py:1651
+#: appObjects/FlatCAMCNCJob.py:1836 appObjects/FlatCAMCNCJob.py:1841
+#: appObjects/FlatCAMCNCJob.py:1914 appObjects/FlatCAMCNCJob.py:1919
 #: appTools/ToolSolderPaste.py:1063 app_Main.py:7038 app_Main.py:7043
 msgid "Export Code ..."
 msgstr "Code exportieren ..."
 
-#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1663
-#: appObjects/FlatCAMCNCJob.py:1853 appObjects/FlatCAMCNCJob.py:2302
+#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1668
+#: appObjects/FlatCAMCNCJob.py:1858 appObjects/FlatCAMCNCJob.py:2307
 #: appTools/ToolSolderPaste.py:1093
 msgid "No such file or directory"
 msgstr "Keine solche Datei oder Ordner"
 
-#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2316
+#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2321
 msgid "Saved to"
 msgstr "Gespeichert in"
 
@@ -4216,7 +4216,7 @@ msgstr "Speichern Sie GCode"
 msgid "Start GCode"
 msgstr "G-Code starten"
 
-#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2007
+#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2012
 #: appTools/ToolCalibration.py:447
 msgid "Loaded Machine Code into Code Editor"
 msgstr "Maschinencode in den Code-Editor geladen"
@@ -4236,7 +4236,7 @@ msgstr "Durchm"
 
 #: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:999
 #: appGUI/ObjectUI.py:2009 appTools/ToolIsolation.py:3022
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 msgid "TT"
 msgstr "TT"
 
@@ -5302,8 +5302,8 @@ msgstr "Rauszoomen"
 msgid "Zoom Fit"
 msgstr "Passend zoomen"
 
-#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:2067
-msgid "&Command Line"
+#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:1154
+msgid "Command Line"
 msgstr "Befehlszeile"
 
 #: appGUI/MainGUI.py:924 appGUI/MainGUI.py:2079
@@ -5600,10 +5600,6 @@ msgstr "Schalten Sie die Anzeige der Achse auf der Leinwand um"
 msgid "Preferences"
 msgstr "Einstellungen"
 
-#: appGUI/MainGUI.py:1154
-msgid "Command Line"
-msgstr "Befehlszeile"
-
 #: appGUI/MainGUI.py:1160
 msgid "HUD (Heads up display)"
 msgstr "HUD (Heads-up-Display)"
@@ -5632,11 +5628,18 @@ msgstr ""
 "Absolute Messung.\n"
 "Referenz ist (X = 0, Y = 0)"
 
+#: appGUI/MainGUI.py:1194
+#, fuzzy
+#| msgid "Show Shell"
+msgid "TCL Shell"
+msgstr "Shell anzeigen"
+
 #: appGUI/MainGUI.py:1221 appGUI/MainGUI.py:1470 app_Main.py:8143
 msgid "Project"
 msgstr "Projekt"
 
-#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272
+#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272 appGUI/MainGUI.py:3791
+#: appGUI/MainGUI.py:3797
 msgid "Plot Area"
 msgstr "Grundstücksfläche"
 
@@ -5730,7 +5733,7 @@ msgstr "Einstellungen werden geschlossen ohne die Änderungen zu speichern."
 msgid "Toggle Visibility"
 msgstr "Sichtbarkeit umschalten"
 
-#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2330
+#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2342
 msgid "New"
 msgstr "Neu"
 
@@ -5743,8 +5746,8 @@ msgstr "Neu"
 #: appTools/ToolDblSided.py:767 appTools/ToolFilm.py:929
 #: appTools/ToolFilm.py:952 appTools/ToolImage.py:136 appTools/ToolImage.py:191
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3338
-#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:803
-#: appTools/ToolNCC.py:3788 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:805
+#: appTools/ToolNCC.py:3848 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:587
@@ -5762,7 +5765,7 @@ msgstr "Geometrie"
 #: appTools/ToolDblSided.py:527 appTools/ToolDblSided.py:724
 #: appTools/ToolDblSided.py:766 appTools/ToolFilm.py:1207
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPunchGerber.py:803 appTools/ToolPunchGerber.py:818
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:586
@@ -5879,12 +5882,16 @@ msgstr "Ja"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:148
 #: appTools/ToolDrilling.py:2090 appTools/ToolIsolation.py:3066
-#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3875
+#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3935
 #: appTools/ToolPaint.py:2851 appTranslation.py:113 appTranslation.py:215
 #: app_Main.py:2290 app_Main.py:3385 app_Main.py:5810 app_Main.py:6894
 msgid "No"
 msgstr "Nein"
 
+#: appGUI/MainGUI.py:2067
+msgid "&Command Line"
+msgstr "Befehlszeile"
+
 #: appGUI/MainGUI.py:2086
 msgid "&Cutout Tool"
 msgstr "Ausschnittwerkzeug"
@@ -6623,7 +6630,7 @@ msgstr ""
 "Erstellen Sie ein Geometrieobjekt mit\n"
 "Werkzeugwege zum Schneiden um Polygonen."
 
-#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4315
+#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4375
 msgid ""
 "Create the Geometry Object\n"
 "for non-copper routing."
@@ -6693,7 +6700,7 @@ msgstr "Die resultierende Geometrie hat abgerundete Ecken."
 
 #: appGUI/ObjectUI.py:467 appGUI/ObjectUI.py:507 appTools/ToolCutOut.py:2287
 #: appTools/ToolCutOut.py:2302 appTools/ToolIsolation.py:3444
-#: appTools/ToolNCC.py:4312 appTools/ToolPaint.py:3178
+#: appTools/ToolNCC.py:4372 appTools/ToolPaint.py:3178
 msgid "Generate Geometry"
 msgstr "Geometrie erzeugen"
 
@@ -7058,14 +7065,14 @@ msgstr ""
 "Cut und Negativ für \"Inside\" Cut."
 
 #: appGUI/ObjectUI.py:1079 appTools/ToolIsolation.py:3087
-#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3902 appTools/ToolPaint.py:140
+#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3962 appTools/ToolPaint.py:140
 #: appTools/ToolPaint.py:2878
 msgid "Add from DB"
 msgstr "Aus DB hinzufügen"
 
 #: appGUI/ObjectUI.py:1096 appTools/ToolCutOut.py:2071
 #: appTools/ToolIsolation.py:61 appTools/ToolIsolation.py:3122
-#: appTools/ToolNCC.py:3936 appTools/ToolPaint.py:2898
+#: appTools/ToolNCC.py:3996 appTools/ToolPaint.py:2898
 msgid "Search and Add"
 msgstr ""
 
@@ -7079,14 +7086,14 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1103 appTools/ToolCutOut.py:2083
 #: appTools/ToolIsolation.py:65 appTools/ToolIsolation.py:3133
-#: appTools/ToolNCC.py:3947 appTools/ToolPaint.py:2909
+#: appTools/ToolNCC.py:4007 appTools/ToolPaint.py:2909
 #, fuzzy
 #| msgid "Add from DB"
 msgid "Pick from DB"
 msgstr "Aus DB hinzufügen"
 
 #: appGUI/ObjectUI.py:1106 appTools/ToolCutOut.py:2086
-#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:3950
+#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:4010
 #: appTools/ToolPaint.py:2912
 #, fuzzy
 #| msgid ""
@@ -7133,8 +7140,8 @@ msgstr ""
 #: appTools/ToolMilling.py:779 appTools/ToolMilling.py:790
 #: appTools/ToolMilling.py:794 appTools/ToolMilling.py:1711
 #: appTools/ToolNCC.py:271 appTools/ToolNCC.py:276 appTools/ToolNCC.py:306
-#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
-#: appTools/ToolNCC.py:3980 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
+#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
+#: appTools/ToolNCC.py:4040 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
 #: appTools/ToolPaint.py:282 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:316 appTools/ToolPaint.py:655
 #: appTools/ToolPaint.py:2940
@@ -7143,7 +7150,7 @@ msgstr "Parameter für"
 
 #: appGUI/ObjectUI.py:1175 appTools/ToolDrilling.py:2119
 #: appTools/ToolIsolation.py:3169 appTools/ToolMilling.py:1714
-#: appTools/ToolNCC.py:3983 appTools/ToolPaint.py:2943
+#: appTools/ToolNCC.py:4043 appTools/ToolPaint.py:2943
 msgid ""
 "The data used for creating GCode.\n"
 "Each tool store it's own set of such data."
@@ -7295,7 +7302,7 @@ msgstr ""
 msgid "Number of time units for spindle to dwell."
 msgstr "Anzahl der Zeiteinheiten, in denen die Spindel verweilen soll."
 
-#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2128
+#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2140
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333
@@ -7303,7 +7310,7 @@ msgstr "Anzahl der Zeiteinheiten, in denen die Spindel verweilen soll."
 msgid "Probe Z depth"
 msgstr "Sonde Z Tiefe"
 
-#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2130
+#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2142
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335
@@ -7322,7 +7329,7 @@ msgstr ""
 msgid "Feedrate Probe"
 msgstr "Vorschubsonde"
 
-#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2143
+#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2155
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348
@@ -7332,13 +7339,13 @@ msgstr "Der Vorschub während der Sondenmessung."
 
 #: appGUI/ObjectUI.py:1434 appTools/ToolDrilling.py:2364
 #: appTools/ToolIsolation.py:3265 appTools/ToolMilling.py:2042
-#: appTools/ToolNCC.py:4141 appTools/ToolPaint.py:3049
+#: appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3049
 msgid "Apply parameters to all tools"
 msgstr "Parameter auf alle Werkzeuge anwenden"
 
 #: appGUI/ObjectUI.py:1437 appTools/ToolDrilling.py:2367
 #: appTools/ToolIsolation.py:3268 appTools/ToolMilling.py:2045
-#: appTools/ToolNCC.py:4144 appTools/ToolPaint.py:3052
+#: appTools/ToolNCC.py:4204 appTools/ToolPaint.py:3052
 msgid ""
 "The parameters in the current form will be applied\n"
 "on all the tools from the Tool Table."
@@ -7348,13 +7355,13 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1448 appTools/ToolDrilling.py:2378
 #: appTools/ToolIsolation.py:3279 appTools/ToolMilling.py:2056
-#: appTools/ToolNCC.py:4155 appTools/ToolPaint.py:3063
+#: appTools/ToolNCC.py:4215 appTools/ToolPaint.py:3063
 msgid "Common Parameters"
 msgstr "Allgemeine Parameter"
 
 #: appGUI/ObjectUI.py:1450 appTools/ToolDrilling.py:2380
 #: appTools/ToolIsolation.py:3281 appTools/ToolMilling.py:2058
-#: appTools/ToolNCC.py:4157 appTools/ToolPaint.py:3065
+#: appTools/ToolNCC.py:4217 appTools/ToolPaint.py:3065
 msgid "Parameters that are common for all tools."
 msgstr "Parameter, die allen Werkzeugen gemeinsam sind."
 
@@ -7558,7 +7565,7 @@ msgstr "Fügen Sie einen Ausschlussbereich hinzu."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286
 #: appTools/ToolDrilling.py:2591 appTools/ToolIsolation.py:3427
-#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4285
+#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4345
 #: appTools/ToolPaint.py:3165
 msgid "The kind of selection shape used for area selection."
 msgstr "Die Art der Auswahlform, die für die Bereichsauswahl verwendet wird."
@@ -7803,97 +7810,97 @@ msgstr ""
 msgid "Autolevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2052
+#: appGUI/ObjectUI.py:2053
 msgid "Enable the autolevelling feature."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2069
+#: appGUI/ObjectUI.py:2081
 #, fuzzy
 #| msgid "Tools Table"
 msgid "Probe Points Table"
 msgstr "Werkzeugtabelle"
 
-#: appGUI/ObjectUI.py:2070
+#: appGUI/ObjectUI.py:2082
 msgid "Generate GCode that will obtain the height map"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2072
+#: appGUI/ObjectUI.py:2084
 msgid "Show"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2073
+#: appGUI/ObjectUI.py:2085
 #, fuzzy
 #| msgid "Toggle the display of axis on canvas"
 msgid "Toggle the display of the Probe Points table."
 msgstr "Schalten Sie die Anzeige der Achse auf der Leinwand um"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 #, fuzzy
 #| msgid "Coordinates"
 msgid "X-Y Coordinates"
 msgstr "Koordinaten"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 #, fuzzy
 #| msgid "Light"
 msgid "Height"
 msgstr "Licht"
 
-#: appGUI/ObjectUI.py:2090
+#: appGUI/ObjectUI.py:2102
 #, fuzzy
 #| msgid "Plot Options"
 msgid "Plot probing points"
 msgstr "Diagrammoptionen"
 
-#: appGUI/ObjectUI.py:2092
+#: appGUI/ObjectUI.py:2104
 msgid ""
 "Plot the probing points in the table.\n"
 "If a Voronoi method is used then\n"
 "the Voronoi areas are also plotted."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2107
+#: appGUI/ObjectUI.py:2119
 #, fuzzy
 #| msgid "Finished G-Code generation"
 msgid "Probe GCode Generation"
 msgstr "Fertige G-Code-Generierung"
 
-#: appGUI/ObjectUI.py:2109
+#: appGUI/ObjectUI.py:2121
 msgid ""
 "Will create a GCode which will be sent to the controller,\n"
 "either through a file or directly, with the intent to get the height map\n"
 "that is to modify the original GCode to level the cutting height."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2116
+#: appGUI/ObjectUI.py:2128
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
 #, fuzzy
 #| msgid "Probe Z depth"
 msgid "Probe Z travel"
 msgstr "Sonde Z Tiefe"
 
-#: appGUI/ObjectUI.py:2118
+#: appGUI/ObjectUI.py:2130
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
 #, fuzzy
 #| msgid "Height (Z) for travelling between the points."
 msgid "The safe Z for probe travelling between probe points."
 msgstr "Die Höhe (Z) für den Weg zwischen Pads."
 
-#: appGUI/ObjectUI.py:2141
+#: appGUI/ObjectUI.py:2153
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
 #, fuzzy
 #| msgid "Feedrate"
 msgid "Probe Feedrate"
 msgstr "Vorschubgeschwindigkeit"
 
-#: appGUI/ObjectUI.py:2158
+#: appGUI/ObjectUI.py:2170
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
 #, fuzzy
 #| msgid "Mode:"
 msgid "Mode"
 msgstr "Modus:"
 
-#: appGUI/ObjectUI.py:2159
+#: appGUI/ObjectUI.py:2171
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
 msgid ""
 "Choose a mode for height map generation.\n"
@@ -7901,21 +7908,21 @@ msgid ""
 "- Grid: will automatically generate a grid of probe points"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2165
+#: appGUI/ObjectUI.py:2177
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
 #: appTools/ToolCutOut.py:2324 appTools/ToolFiducials.py:801
 msgid "Manual"
 msgstr "Manuell"
 
-#: appGUI/ObjectUI.py:2166
+#: appGUI/ObjectUI.py:2178
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
 #, fuzzy
 #| msgid "Grids"
 msgid "Grid"
 msgstr "Raster"
 
-#: appGUI/ObjectUI.py:2173
+#: appGUI/ObjectUI.py:2185
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
 msgid ""
 "Choose a method for approximation of heights from autolevelling data.\n"
@@ -7923,125 +7930,125 @@ msgid ""
 "- Bilinear: will use bilinear interpolation. Usable only for grid mode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2179
+#: appGUI/ObjectUI.py:2191
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
 msgid "Voronoi"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2180
+#: appGUI/ObjectUI.py:2192
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
 #, fuzzy
 #| msgid "Linear"
 msgid "Bilinear"
 msgstr "Linear"
 
-#: appGUI/ObjectUI.py:2193
+#: appGUI/ObjectUI.py:2205
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
 #: appTools/ToolPanelize.py:787
 msgid "Columns"
 msgstr "Säulen"
 
-#: appGUI/ObjectUI.py:2195
+#: appGUI/ObjectUI.py:2207
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
 msgid "The number of grid columns."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2204
+#: appGUI/ObjectUI.py:2216
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
 #: appTools/ToolPanelize.py:797
 msgid "Rows"
 msgstr "Reihen"
 
-#: appGUI/ObjectUI.py:2206
+#: appGUI/ObjectUI.py:2218
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
 msgid "The number of gird rows."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2211
+#: appGUI/ObjectUI.py:2223
 #, fuzzy
 #| msgid "Get Points"
 msgid "Add Probe Points"
 msgstr "Punkte einholen"
 
-#: appGUI/ObjectUI.py:2219
+#: appGUI/ObjectUI.py:2231
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
 #, fuzzy
 #| msgid "Contour"
 msgid "Controller"
 msgstr "Kontur"
 
-#: appGUI/ObjectUI.py:2221
+#: appGUI/ObjectUI.py:2233
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
 msgid ""
 "The kind of controller for which to generate\n"
 "height map gcode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2267 appGUI/ObjectUI.py:2282
-#: appObjects/FlatCAMCNCJob.py:1302 appObjects/FlatCAMCNCJob.py:1324
+#: appGUI/ObjectUI.py:2279 appGUI/ObjectUI.py:2294
+#: appObjects/FlatCAMCNCJob.py:1307 appObjects/FlatCAMCNCJob.py:1329
 #, fuzzy
 #| msgid "Contour"
 msgid "Control"
 msgstr "Kontur"
 
-#: appGUI/ObjectUI.py:2277 appGUI/ObjectUI.py:2284
-#: appObjects/FlatCAMCNCJob.py:1304 appObjects/FlatCAMCNCJob.py:1326
+#: appGUI/ObjectUI.py:2289 appGUI/ObjectUI.py:2296
+#: appObjects/FlatCAMCNCJob.py:1309 appObjects/FlatCAMCNCJob.py:1331
 #, fuzzy
 #| msgid "Rendered"
 msgid "Sender"
 msgstr "Gerendert"
 
-#: appGUI/ObjectUI.py:2298
+#: appGUI/ObjectUI.py:2310
 msgid "COM list"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2300 appGUI/ObjectUI.py:2315
+#: appGUI/ObjectUI.py:2312 appGUI/ObjectUI.py:2327
 msgid "Lists the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2304
+#: appGUI/ObjectUI.py:2316
 msgid "Search"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2306
+#: appGUI/ObjectUI.py:2318
 msgid "Search for the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2313
+#: appGUI/ObjectUI.py:2325
 msgid "Baud rates"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2332
+#: appGUI/ObjectUI.py:2344
 msgid "New, custom baudrate."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2340
+#: appGUI/ObjectUI.py:2352
 msgid "Add the specified custom baudrate to the list."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2346
+#: appGUI/ObjectUI.py:2358
 #, fuzzy
 #| msgid "Delete Selected"
 msgid "Delete selected baudrate"
 msgstr "Ausgewählte löschen"
 
-#: appGUI/ObjectUI.py:2350
+#: appGUI/ObjectUI.py:2362
 msgid "Reset"
 msgstr "Zurücksetzen"
 
-#: appGUI/ObjectUI.py:2352
+#: appGUI/ObjectUI.py:2364
 msgid "Software reset of the controller."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2358 appObjects/FlatCAMCNCJob.py:1318
+#: appGUI/ObjectUI.py:2370 appObjects/FlatCAMCNCJob.py:1323
 #, fuzzy
 #| msgid "Connect"
 msgid "Disconnected"
 msgstr "Verbinden"
 
-#: appGUI/ObjectUI.py:2360
+#: appGUI/ObjectUI.py:2372
 #, fuzzy
 #| msgid ""
 #| "Create a Gerber object from the selected object, within\n"
@@ -8051,131 +8058,131 @@ msgstr ""
 "Erstellen Sie innerhalb des ausgewählten Objekts ein Gerber-Objekt\n"
 "das angegebene Feld."
 
-#: appGUI/ObjectUI.py:2385
+#: appGUI/ObjectUI.py:2397
 msgid "Jog"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2393
+#: appGUI/ObjectUI.py:2405
 #, fuzzy
 #| msgid "Zeros"
 msgid "Zero Axes"
 msgstr "Nullen"
 
-#: appGUI/ObjectUI.py:2426
+#: appGUI/ObjectUI.py:2438
 msgid "Pause/Resume"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2448
+#: appGUI/ObjectUI.py:2460
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
 msgid "Step"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2450
+#: appGUI/ObjectUI.py:2462
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
 msgid "Each jog action will move the axes with this value."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2462
+#: appGUI/ObjectUI.py:2474
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89
 #: appObjects/FlatCAMObj.py:831 appTools/ToolProperties.py:529
 msgid "Feedrate"
 msgstr "Vorschubgeschwindigkeit"
 
-#: appGUI/ObjectUI.py:2464
+#: appGUI/ObjectUI.py:2476
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
 msgid "Feedrate when jogging."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2484
+#: appGUI/ObjectUI.py:2496
 msgid "Send Command"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2486 appGUI/ObjectUI.py:2496
+#: appGUI/ObjectUI.py:2498 appGUI/ObjectUI.py:2508
 msgid "Send a custom command to GRBL."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2491
+#: appGUI/ObjectUI.py:2503
 msgid "Type GRBL command ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2494
+#: appGUI/ObjectUI.py:2506
 msgid "Send"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2502
+#: appGUI/ObjectUI.py:2514
 #, fuzzy
 #| msgid "Text to PDF parameters"
 msgid "Get Config parameter"
 msgstr "Text zu PDF-Parametern"
 
-#: appGUI/ObjectUI.py:2504
+#: appGUI/ObjectUI.py:2516
 msgid "A GRBL configuration parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2509
+#: appGUI/ObjectUI.py:2521
 msgid "Type GRBL parameter ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2512
+#: appGUI/ObjectUI.py:2524
 #, fuzzy
 #| msgid "Geo"
 msgid "Get"
 msgstr "Geo"
 
-#: appGUI/ObjectUI.py:2514
+#: appGUI/ObjectUI.py:2526
 msgid "Get the value of a specified GRBL parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2522
+#: appGUI/ObjectUI.py:2534
 #, fuzzy
 #| msgid "Gerber Export"
 msgid "Get Report"
 msgstr "Gerber Export"
 
-#: appGUI/ObjectUI.py:2524
+#: appGUI/ObjectUI.py:2536
 msgid "Print in shell the GRBL report."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2530
+#: appGUI/ObjectUI.py:2542
 msgid "Apply AutoLevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2532
+#: appGUI/ObjectUI.py:2544
 msgid ""
 "Will send the probing GCode to the GRBL controller,\n"
 "wait for the Z probing data and then apply this data\n"
 "over the original GCode therefore doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2541
+#: appGUI/ObjectUI.py:2553
 msgid "Will save the GRBL height map."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2551
+#: appGUI/ObjectUI.py:2563
 #, fuzzy
 #| msgid "Starting G-Code"
 msgid "Save Probing GCode"
 msgstr "G-Code starten"
 
-#: appGUI/ObjectUI.py:2553
+#: appGUI/ObjectUI.py:2565
 #, fuzzy
 #| msgid "Starting G-Code"
 msgid "Will save the probing GCode."
 msgstr "G-Code starten"
 
-#: appGUI/ObjectUI.py:2562
+#: appGUI/ObjectUI.py:2574
 msgid "View/Edit the probing GCode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2569 appObjects/FlatCAMCNCJob.py:1735
-#: appObjects/FlatCAMCNCJob.py:1739
+#: appGUI/ObjectUI.py:2581 appObjects/FlatCAMCNCJob.py:1740
+#: appObjects/FlatCAMCNCJob.py:1744
 #, fuzzy
 #| msgid "Import List"
 msgid "Import Height Map"
 msgstr "Liste importieren"
 
-#: appGUI/ObjectUI.py:2571
+#: appGUI/ObjectUI.py:2583
 msgid ""
 "Import the file that has the Z heights\n"
 "obtained through probing and then apply this data\n"
@@ -8183,11 +8190,11 @@ msgid ""
 "doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2589
+#: appGUI/ObjectUI.py:2601
 msgid "Export CNC Code"
 msgstr "CNC-Code exportieren"
 
-#: appGUI/ObjectUI.py:2591
+#: appGUI/ObjectUI.py:2603
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
 msgid ""
@@ -8197,11 +8204,11 @@ msgstr ""
 "Exportieren und speichern Sie den G-Code nach\n"
 "Machen Sie dieses Objekt in eine Datei."
 
-#: appGUI/ObjectUI.py:2600
+#: appGUI/ObjectUI.py:2612
 msgid "Save CNC Code"
 msgstr "CNC-Code speichern"
 
-#: appGUI/ObjectUI.py:2603
+#: appGUI/ObjectUI.py:2615
 msgid ""
 "Opens dialog to save G-Code\n"
 "file."
@@ -8209,86 +8216,86 @@ msgstr ""
 "Öffnet den Dialog zum Speichern des G-Codes\n"
 "Datei."
 
-#: appGUI/ObjectUI.py:2610
+#: appGUI/ObjectUI.py:2622
 #, fuzzy
 #| msgid "View CNC Code"
 msgid "Review CNC Code."
 msgstr "CNC-Code anzeigen"
 
-#: appGUI/ObjectUI.py:2671
+#: appGUI/ObjectUI.py:2683
 msgid "Script Object"
 msgstr "Skriptobjekt"
 
-#: appGUI/ObjectUI.py:2691 appGUI/ObjectUI.py:2765
+#: appGUI/ObjectUI.py:2703 appGUI/ObjectUI.py:2777
 msgid "Auto Completer"
 msgstr "Auto-Vervollständiger"
 
-#: appGUI/ObjectUI.py:2693
+#: appGUI/ObjectUI.py:2705
 msgid "This selects if the auto completer is enabled in the Script Editor."
 msgstr ""
 "Hiermit wird ausgewählt, ob der automatische Vervollständiger im Skript-"
 "Editor aktiviert ist."
 
-#: appGUI/ObjectUI.py:2738
+#: appGUI/ObjectUI.py:2750
 msgid "Document Object"
 msgstr "Dokumentobjekt"
 
-#: appGUI/ObjectUI.py:2767
+#: appGUI/ObjectUI.py:2779
 msgid "This selects if the auto completer is enabled in the Document Editor."
 msgstr ""
 "Hiermit wird ausgewählt, ob der automatische Vervollständiger im "
 "Dokumenteditor aktiviert ist."
 
-#: appGUI/ObjectUI.py:2785
+#: appGUI/ObjectUI.py:2797
 msgid "Font Type"
 msgstr "Schriftart"
 
-#: appGUI/ObjectUI.py:2802
+#: appGUI/ObjectUI.py:2814
 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
 msgid "Font Size"
 msgstr "Schriftgröße"
 
-#: appGUI/ObjectUI.py:2838
+#: appGUI/ObjectUI.py:2850
 msgid "Alignment"
 msgstr "Ausrichtung"
 
-#: appGUI/ObjectUI.py:2843
+#: appGUI/ObjectUI.py:2855
 msgid "Align Left"
 msgstr "Linksbündig"
 
-#: appGUI/ObjectUI.py:2848 app_Main.py:4993
+#: appGUI/ObjectUI.py:2860 app_Main.py:4993
 msgid "Center"
 msgstr "Center"
 
-#: appGUI/ObjectUI.py:2853
+#: appGUI/ObjectUI.py:2865
 msgid "Align Right"
 msgstr "Rechts ausrichten"
 
-#: appGUI/ObjectUI.py:2858
+#: appGUI/ObjectUI.py:2870
 msgid "Justify"
 msgstr "Rechtfertigen"
 
-#: appGUI/ObjectUI.py:2865
+#: appGUI/ObjectUI.py:2877
 msgid "Font Color"
 msgstr "Schriftfarbe"
 
-#: appGUI/ObjectUI.py:2867
+#: appGUI/ObjectUI.py:2879
 msgid "Set the font color for the selected text"
 msgstr "Stellen Sie die Schriftfarbe für den ausgewählten Text ein"
 
-#: appGUI/ObjectUI.py:2881
+#: appGUI/ObjectUI.py:2893
 msgid "Selection Color"
 msgstr "Auswahlfarbe"
 
-#: appGUI/ObjectUI.py:2883
+#: appGUI/ObjectUI.py:2895
 msgid "Set the selection color when doing text selection."
 msgstr "Stellen Sie die Auswahlfarbe bei der Textauswahl ein."
 
-#: appGUI/ObjectUI.py:2897
+#: appGUI/ObjectUI.py:2909
 msgid "Tab Size"
 msgstr "Tab-Größe"
 
-#: appGUI/ObjectUI.py:2899
+#: appGUI/ObjectUI.py:2911
 msgid "Set the tab size. In pixels. Default value is 80 pixels."
 msgstr ""
 "Stellen Sie die Größe der Registerkarte ein. In Pixeln. Der Standardwert "
@@ -10478,10 +10485,10 @@ msgstr "\"Folgen\""
 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64
 #: appObjects/FlatCAMGerber.py:370 appTools/ToolCopperThieving.py:581
 #: appTools/ToolCopperThieving.py:770 appTools/ToolCopperThieving.py:782
-#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1791
-#: appTools/ToolNCC.py:1818 appTools/ToolNCC.py:1926 appTools/ToolNCC.py:1939
-#: appTools/ToolNCC.py:2785 appTools/ToolNCC.py:2890 appTools/ToolNCC.py:2905
-#: appTools/ToolNCC.py:3171 appTools/ToolNCC.py:3272 appTools/ToolNCC.py:3287
+#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1793
+#: appTools/ToolNCC.py:1820 appTools/ToolNCC.py:1928 appTools/ToolNCC.py:1941
+#: appTools/ToolNCC.py:2845 appTools/ToolNCC.py:2950 appTools/ToolNCC.py:2965
+#: appTools/ToolNCC.py:3231 appTools/ToolNCC.py:3332 appTools/ToolNCC.py:3347
 #: camlib.py:1113
 msgid "Buffering"
 msgstr "Pufferung"
@@ -10815,9 +10822,9 @@ msgstr ""
 
 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
-#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1349
-#: appTools/ToolNCC.py:1665 appTools/ToolNCC.py:1729 appTools/ToolNCC.py:2649
-#: appTools/ToolNCC.py:2658 appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4376
+#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1351
+#: appTools/ToolNCC.py:1667 appTools/ToolNCC.py:1731 appTools/ToolNCC.py:2709
+#: appTools/ToolNCC.py:2718 appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4436
 #: defaults.py:475 tclCommands/TclCommandCopperClear.py:190
 msgid "Itself"
 msgstr "Selbst"
@@ -10828,8 +10835,8 @@ msgstr "Selbst"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1219 appTools/ToolIsolation.py:819
 #: appTools/ToolIsolation.py:1435 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1363 appTools/ToolNCC.py:1681 appTools/ToolNCC.py:1736
-#: appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4386 appTools/ToolPaint.py:1061
+#: appTools/ToolNCC.py:1365 appTools/ToolNCC.py:1683 appTools/ToolNCC.py:1738
+#: appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4446 appTools/ToolPaint.py:1061
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3249
 msgid "Area Selection"
 msgstr "Bereichsauswahl"
@@ -10840,9 +10847,9 @@ msgstr "Bereichsauswahl"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1220 appTools/ToolDblSided.py:757
 #: appTools/ToolIsolation.py:1475 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1382 appTools/ToolNCC.py:1687 appTools/ToolNCC.py:1744
-#: appTools/ToolNCC.py:2122 appTools/ToolNCC.py:2356 appTools/ToolNCC.py:2694
-#: appTools/ToolNCC.py:4240 appTools/ToolPaint.py:1080
+#: appTools/ToolNCC.py:1384 appTools/ToolNCC.py:1689 appTools/ToolNCC.py:1746
+#: appTools/ToolNCC.py:2124 appTools/ToolNCC.py:2358 appTools/ToolNCC.py:2754
+#: appTools/ToolNCC.py:4300 appTools/ToolPaint.py:1080
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3232
 #: tclCommands/TclCommandCopperClear.py:192 tclCommands/TclCommandPaint.py:166
 msgid "Reference Object"
@@ -12188,7 +12195,7 @@ msgstr "Erstellen Sie Geometrie zum Fräsen von Löchern."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:140
 #: appTools/ToolDrilling.py:2082 appTools/ToolIsolation.py:3058
-#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3867
+#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3927
 #: appTools/ToolPaint.py:2843
 msgid "Tool order"
 msgstr "Werkzeugbestellung"
@@ -12199,8 +12206,8 @@ msgstr "Werkzeugbestellung"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141
 #: appTools/ToolDrilling.py:2083 appTools/ToolIsolation.py:3059
-#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3868
-#: appTools/ToolNCC.py:3878 appTools/ToolPaint.py:2844
+#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3928
+#: appTools/ToolNCC.py:3938 appTools/ToolPaint.py:2844
 #: appTools/ToolPaint.py:2854
 msgid ""
 "This set the way that the tools in the tools table are used.\n"
@@ -12228,7 +12235,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:149
 #: appTools/ToolDrilling.py:2091 appTools/ToolIsolation.py:3067
-#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3876
+#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3936
 #: appTools/ToolPaint.py:2852
 msgid "Forward"
 msgstr "Vorwärts"
@@ -12238,7 +12245,7 @@ msgstr "Vorwärts"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150
 #: appTools/ToolDrilling.py:2092 appTools/ToolIsolation.py:3068
-#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3877
+#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3937
 #: appTools/ToolPaint.py:2853
 msgid "Reverse"
 msgstr "Rückwärts"
@@ -12598,7 +12605,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:242
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243
-#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4162
+#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4222
 #: appTools/ToolPaint.py:3069
 msgid "Rest"
 msgstr "Rest"
@@ -12650,13 +12657,13 @@ msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:350
-#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4298
+#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4358
 msgid "Check validity"
 msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:352
-#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4300
+#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4360
 msgid ""
 "If checked then the tools diameters are verified\n"
 "if they will provide a complete isolation."
@@ -12782,7 +12789,7 @@ msgstr ""
 "zu den Kupferflächen enden.\n"
 "Der Wert kann zwischen 0 und 10 FlatCAM-Einheiten liegen."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4166
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4226
 msgid ""
 "If checked, use 'rest machining'.\n"
 "Basically it will clear copper outside PCB features,\n"
@@ -12800,7 +12807,7 @@ msgstr ""
 "kein kupfer mehr zum löschen oder es gibt keine werkzeuge mehr.\n"
 "Wenn nicht aktiviert, verwenden Sie den Standardalgorithmus."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4246
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4306
 msgid ""
 "Selection of area to be processed.\n"
 "- 'Itself' - the processing extent is based on the object that is "
@@ -12943,7 +12950,7 @@ msgstr "Anzahl der Zeilen des gewünschten Panels"
 #: appTools/ToolFilm.py:951 appTools/ToolImage.py:117 appTools/ToolImage.py:138
 #: appTools/ToolImage.py:191 appTools/ToolIsolation.py:802
 #: appTools/ToolIsolation.py:3339 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:3789 appTools/ToolNCC.py:4263
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:3849 appTools/ToolNCC.py:4323
 #: appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
 #: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167
 #: appTools/ToolPanelize.py:715 appTools/ToolPanelize.py:809
@@ -13472,33 +13479,33 @@ msgstr ""
 msgid "created/selected"
 msgstr "erstellt / ausgewählt"
 
-#: appObjects/FlatCAMCNCJob.py:637 appObjects/FlatCAMDocument.py:71
+#: appObjects/FlatCAMCNCJob.py:642 appObjects/FlatCAMDocument.py:71
 #: appObjects/FlatCAMScript.py:82
 msgid "<span style=\"color:green;\"><b>Basic</b></span>"
 msgstr "<span style=\"color:green;\"><b>Basic</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:644 appObjects/FlatCAMDocument.py:75
+#: appObjects/FlatCAMCNCJob.py:649 appObjects/FlatCAMDocument.py:75
 #: appObjects/FlatCAMScript.py:86
 msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
 msgstr "<span style=\"color:red;\"><b>Erweitert</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:780 appObjects/FlatCAMCNCJob.py:1058
+#: appObjects/FlatCAMCNCJob.py:785 appObjects/FlatCAMCNCJob.py:1063
 msgid ""
 "Voronoi function can not be loaded.\n"
 "Shapely >= 1.8 is required"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:808
+#: appObjects/FlatCAMCNCJob.py:813
 #, fuzzy
 #| msgid "Click on Start point ..."
 msgid "Click on canvas to add a Probe Point..."
 msgstr "Klicken Sie auf Startpunkt ..."
 
-#: appObjects/FlatCAMCNCJob.py:1004
+#: appObjects/FlatCAMCNCJob.py:1009
 msgid "Point is not within the object area. Choose another point."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1024
+#: appObjects/FlatCAMCNCJob.py:1029
 #, fuzzy
 #| msgid ""
 #| "Zone added. Click to start adding next zone or right click to finish."
@@ -13509,139 +13516,139 @@ msgstr ""
 "Zone hinzugefügt. Klicken Sie, um die nächste Zone hinzuzufügen, oder "
 "klicken Sie mit der rechten Maustaste, um den Vorgang abzuschließen."
 
-#: appObjects/FlatCAMCNCJob.py:1046
+#: appObjects/FlatCAMCNCJob.py:1051
 #, fuzzy
 #| msgid "Finished G-Code processing..."
 msgid "Finished adding Probe Points..."
 msgstr "Fertige G-Code Verarbeitung ..."
 
-#: appObjects/FlatCAMCNCJob.py:1260
+#: appObjects/FlatCAMCNCJob.py:1265
 #, fuzzy
 #| msgid "Click to place ..."
 msgid "COM list updated ..."
 msgstr "Klicken um zu platzieren ..."
 
-#: appObjects/FlatCAMCNCJob.py:1296
+#: appObjects/FlatCAMCNCJob.py:1301
 #, fuzzy
 #| msgid "Connect"
 msgid "Connected"
 msgstr "Verbinden"
 
-#: appObjects/FlatCAMCNCJob.py:1307
+#: appObjects/FlatCAMCNCJob.py:1312
 msgid "Port connected"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1311
+#: appObjects/FlatCAMCNCJob.py:1316
 msgid "Could not connect to GRBL on port"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1328
+#: appObjects/FlatCAMCNCJob.py:1333
 msgid "Port is connected. Disconnecting"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1330
+#: appObjects/FlatCAMCNCJob.py:1335
 #, fuzzy
 #| msgid "Could not retrieve box object"
 msgid "Could not connect to port"
 msgstr "Box-Objekt konnte nicht abgerufen werden"
 
-#: appObjects/FlatCAMCNCJob.py:1360 appObjects/FlatCAMCNCJob.py:1790
+#: appObjects/FlatCAMCNCJob.py:1365 appObjects/FlatCAMCNCJob.py:1795
 #, fuzzy
 #| msgid "Opening G-Code."
 msgid "Sending GCode..."
 msgstr "G-Code öffnen."
 
-#: appObjects/FlatCAMCNCJob.py:1489
+#: appObjects/FlatCAMCNCJob.py:1494
 msgid "GRBL is doing a home cycle."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1495
+#: appObjects/FlatCAMCNCJob.py:1500
 msgid "GRBL software reset was sent."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1503
+#: appObjects/FlatCAMCNCJob.py:1508
 msgid "GRBL resumed."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1507
+#: appObjects/FlatCAMCNCJob.py:1512
 msgid "GRBL paused."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1649 appObjects/FlatCAMCNCJob.py:1839
-#: appObjects/FlatCAMCNCJob.py:1924 appTools/ToolSolderPaste.py:1066
+#: appObjects/FlatCAMCNCJob.py:1654 appObjects/FlatCAMCNCJob.py:1844
+#: appObjects/FlatCAMCNCJob.py:1929 appTools/ToolSolderPaste.py:1066
 msgid "Export cancelled ..."
 msgstr "Export abgebrochen ..."
 
-#: appObjects/FlatCAMCNCJob.py:1673 appObjects/FlatCAMCNCJob.py:1960
+#: appObjects/FlatCAMCNCJob.py:1678 appObjects/FlatCAMCNCJob.py:1965
 #: appObjects/FlatCAMScript.py:134 app_Main.py:7824
 msgid "Loading..."
 msgstr "Wird geladen..."
 
-#: appObjects/FlatCAMCNCJob.py:1677
+#: appObjects/FlatCAMCNCJob.py:1682
 #, fuzzy
 #| msgid "There is no such parameter"
 msgid "There is nothing to view"
 msgstr "Es gibt keinen solchen Parameter"
 
-#: appObjects/FlatCAMCNCJob.py:1683
+#: appObjects/FlatCAMCNCJob.py:1688
 #, fuzzy
 #| msgid "Gcode Viewer"
 msgid "Code Viewer"
 msgstr "GCode Anzeige"
 
-#: appObjects/FlatCAMCNCJob.py:1721
+#: appObjects/FlatCAMCNCJob.py:1726
 #, fuzzy
 #| msgid "Loaded Machine Code into Code Editor"
 msgid "Loaded Machine Code into Code Viewer"
 msgstr "Maschinencode in den Code-Editor geladen"
 
-#: appObjects/FlatCAMCNCJob.py:1766
+#: appObjects/FlatCAMCNCJob.py:1771
 #, fuzzy
 #| msgid "Failed to open config file"
 msgid "Failed to open height map file"
 msgstr "Fehler beim Öffnen der Konfigurationsdatei"
 
-#: appObjects/FlatCAMCNCJob.py:1816
+#: appObjects/FlatCAMCNCJob.py:1821
 msgid "Finished probing. Doing the autolevelling."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1821
+#: appObjects/FlatCAMCNCJob.py:1826
 msgid "Sending probing GCode to the GRBL controller."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1862
+#: appObjects/FlatCAMCNCJob.py:1867
 msgid "Empty GRBL heightmap."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1866
+#: appObjects/FlatCAMCNCJob.py:1871
 #, fuzzy
 #| msgid "Finished G-Code processing..."
 msgid "Finished autolevelling."
 msgstr "Fertige G-Code Verarbeitung ..."
 
-#: appObjects/FlatCAMCNCJob.py:1880
+#: appObjects/FlatCAMCNCJob.py:1885
 msgid "Plotting..."
 msgstr "Zeichnung..."
 
-#: appObjects/FlatCAMCNCJob.py:1950
+#: appObjects/FlatCAMCNCJob.py:1955
 msgid "File saved to"
 msgstr "Datei gespeichert in"
 
-#: appObjects/FlatCAMCNCJob.py:1974
+#: appObjects/FlatCAMCNCJob.py:1979
 #, fuzzy
 #| msgid "Gcode Viewer"
 msgid "Code Review"
 msgstr "GCode Anzeige"
 
-#: appObjects/FlatCAMCNCJob.py:2157
+#: appObjects/FlatCAMCNCJob.py:2162
 msgid "This CNCJob object can't be processed because it is a"
 msgstr "Dieses CNCJob-Objekt kann nicht verarbeitet werden, da es sich um ein"
 
-#: appObjects/FlatCAMCNCJob.py:2159
+#: appObjects/FlatCAMCNCJob.py:2164
 msgid "CNCJob object"
 msgstr "CNCJob-Objekt"
 
-#: appObjects/FlatCAMCNCJob.py:2269
+#: appObjects/FlatCAMCNCJob.py:2274
 msgid ""
 "G-code does not have a G94 code.\n"
 "Append Code snippet will not be used.."
@@ -13704,7 +13711,7 @@ msgstr "Oberfläche"
 #: appTools/ToolIsolation.py:531 appTools/ToolIsolation.py:644
 #: appTools/ToolIsolation.py:710 appTools/ToolMilling.py:628
 #: appTools/ToolMilling.py:749 appTools/ToolMilling.py:794
-#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
+#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
 #: appTools/ToolPaint.py:252 appTools/ToolPaint.py:316
 #: appTools/ToolPaint.py:655
 msgid "Multiple Tools"
@@ -13888,7 +13895,7 @@ msgstr "Operation konnte nicht durchgeführt werden."
 
 #: appObjects/FlatCAMGerber.py:558 appObjects/FlatCAMGerber.py:632
 #: appTools/ToolIsolation.py:1583 appTools/ToolIsolation.py:1951
-#: appTools/ToolNCC.py:1854 appTools/ToolNCC.py:2819 appTools/ToolNCC.py:3198
+#: appTools/ToolNCC.py:1856 appTools/ToolNCC.py:2879 appTools/ToolNCC.py:3258
 msgid "Isolation geometry could not be generated."
 msgstr "Isolationsgeometrie konnte nicht generiert werden."
 
@@ -14308,7 +14315,7 @@ msgstr ""
 #: appTools/ToolEtchCompensation.py:458 appTools/ToolExtractDrills.py:702
 #: appTools/ToolFiducials.py:932 appTools/ToolFilm.py:1383
 #: appTools/ToolInvertGerber.py:286 appTools/ToolIsolation.py:3477
-#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4328
+#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4388
 #: appTools/ToolOptimal.py:593 appTools/ToolPaint.py:3194
 #: appTools/ToolPanelize.py:889 appTools/ToolPunchGerber.py:993
 #: appTools/ToolQRCode.py:904 appTools/ToolRulesCheck.py:1618
@@ -14324,7 +14331,7 @@ msgstr "Reset Werkzeug"
 #: appTools/ToolEtchCompensation.py:461 appTools/ToolExtractDrills.py:705
 #: appTools/ToolFiducials.py:935 appTools/ToolFilm.py:1386
 #: appTools/ToolInvertGerber.py:289 appTools/ToolIsolation.py:3480
-#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4331
+#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4391
 #: appTools/ToolOptimal.py:596 appTools/ToolPaint.py:3197
 #: appTools/ToolPanelize.py:892 appTools/ToolPunchGerber.py:996
 #: appTools/ToolQRCode.py:907 appTools/ToolRulesCheck.py:1621
@@ -14772,8 +14779,8 @@ msgstr "'Copper Thieving' Werkzeug fertig."
 #: appTools/ToolIsolation.py:908 appTools/ToolIsolation.py:1345
 #: appTools/ToolIsolation.py:1372 appTools/ToolMilling.py:424
 #: appTools/ToolMilling.py:639 appTools/ToolMilling.py:1322
-#: appTools/ToolNCC.py:844 appTools/ToolNCC.py:1306 appTools/ToolNCC.py:1355
-#: appTools/ToolNCC.py:1388 appTools/ToolPaint.py:1086
+#: appTools/ToolNCC.py:846 appTools/ToolNCC.py:1308 appTools/ToolNCC.py:1357
+#: appTools/ToolNCC.py:1390 appTools/ToolPaint.py:1086
 #: appTools/ToolPanelize.py:191 appTools/ToolPanelize.py:205
 #: appTools/ToolSub.py:157 appTools/ToolSub.py:170 appTools/ToolSub.py:359
 #: appTools/ToolSub.py:372 tclCommands/TclCommandCopperClear.py:97
@@ -14804,7 +14811,7 @@ msgstr "Copper Thieving Tool: Areale zur Kupferfüllung vorbereiten."
 
 #: appTools/ToolCopperThieving.py:599 appTools/ToolFilm.py:631
 #: appTools/ToolFilm.py:879 appTools/ToolIsolation.py:916
-#: appTools/ToolNCC.py:851 appTools/ToolOptimal.py:145
+#: appTools/ToolNCC.py:853 appTools/ToolOptimal.py:145
 #: appTools/ToolPanelize.py:612 appTools/ToolRulesCheck.py:626
 msgid "Working..."
 msgstr "Arbeiten..."
@@ -14813,13 +14820,13 @@ msgstr "Arbeiten..."
 msgid "Geometry not supported for bounding box"
 msgstr "Geometrie für Umriss nicht unterstützt"
 
-#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1679
-#: appTools/ToolNCC.py:1734 appTools/ToolNCC.py:2674 appTools/ToolPaint.py:2457
+#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1681
+#: appTools/ToolNCC.py:1736 appTools/ToolNCC.py:2734 appTools/ToolPaint.py:2457
 msgid "No object available."
 msgstr "Kein Objekt vorhanden."
 
-#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1704
-#: appTools/ToolNCC.py:1757 appTools/ToolNCC.py:2716
+#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1706
+#: appTools/ToolNCC.py:1759 appTools/ToolNCC.py:2776
 msgid "The reference object type is not supported."
 msgstr "Der Referenzobjekttyp wird nicht unterstützt."
 
@@ -14881,7 +14888,7 @@ msgstr ""
 "Objekt angegebenen Bereichs."
 
 #: appTools/ToolCopperThieving.py:1231 appTools/ToolIsolation.py:3385
-#: appTools/ToolNCC.py:4257 appTools/ToolPaint.py:3137
+#: appTools/ToolNCC.py:4317 appTools/ToolPaint.py:3137
 msgid "Ref. Type"
 msgstr "Ref. Typ"
 
@@ -14895,12 +14902,12 @@ msgstr ""
 "Es kann Gerber, Excellon oder Geometry sein."
 
 #: appTools/ToolCopperThieving.py:1242 appTools/ToolIsolation.py:3396
-#: appTools/ToolNCC.py:4267 appTools/ToolPaint.py:3147
+#: appTools/ToolNCC.py:4327 appTools/ToolPaint.py:3147
 msgid "Ref. Object"
 msgstr "Ref. Objekt"
 
 #: appTools/ToolCopperThieving.py:1244 appTools/ToolIsolation.py:3398
-#: appTools/ToolNCC.py:4269 appTools/ToolPaint.py:3149
+#: appTools/ToolNCC.py:4329 appTools/ToolPaint.py:3149
 msgid "The FlatCAM object to be used as non copper clearing reference."
 msgstr ""
 "Das FlatCAM-Objekt, das als Nicht-Kupfer-Clearing-Referenz verwendet werden "
@@ -15036,7 +15043,7 @@ msgstr "Fügt der ausgewählten Gerber-Datei Eckmarkierungen hinzu."
 
 #: appTools/ToolCutOut.py:281 appTools/ToolIsolation.py:791
 #: appTools/ToolIsolation.py:1049 appTools/ToolIsolation.py:1185
-#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:990 appTools/ToolNCC.py:1128
+#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:992 appTools/ToolNCC.py:1130
 #: appTools/ToolPaint.py:395 appTools/ToolPaint.py:686
 #: appTools/ToolPaint.py:823 appTools/ToolSolderPaste.py:131
 #: appTools/ToolSolderPaste.py:464 app_Main.py:4490
@@ -15045,14 +15052,14 @@ msgstr ""
 "Bitte geben Sie einen Werkzeugdurchmesser ungleich Null im Float-Format ein."
 
 #: appTools/ToolCutOut.py:357 appTools/ToolIsolation.py:1130
-#: appTools/ToolNCC.py:1073 appTools/ToolPaint.py:767
+#: appTools/ToolNCC.py:1075 appTools/ToolPaint.py:767
 #, fuzzy
 #| msgid "Tools in Tools Database edited but not saved."
 msgid "Tool not in Tools Database. Adding a default tool."
 msgstr "Werkzeugdatenbank geschlossen ohne zu speichern."
 
 #: appTools/ToolCutOut.py:364 appTools/ToolDrilling.py:955
-#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1080
+#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1082
 #: appTools/ToolPaint.py:775
 msgid ""
 "Cancelled.\n"
@@ -15072,7 +15079,7 @@ msgid "Default tool added."
 msgstr "Standardwerte"
 
 #: appTools/ToolCutOut.py:466 appTools/ToolIsolation.py:2577
-#: appTools/ToolNCC.py:3649 appTools/ToolPaint.py:2620
+#: appTools/ToolNCC.py:3709 appTools/ToolPaint.py:2620
 msgid "Selected tool can't be used here. Pick another."
 msgstr ""
 
@@ -15127,7 +15134,7 @@ msgstr "Jede Form CutOut-Operation ist abgeschlossen."
 #: appTools/ToolEtchCompensation.py:158 appTools/ToolInvertGerber.py:105
 #: appTools/ToolIsolation.py:912 appTools/ToolIsolation.py:1349
 #: appTools/ToolIsolation.py:1376 appTools/ToolMilling.py:1326
-#: appTools/ToolNCC.py:848 appTools/ToolNCC.py:1310 appTools/ToolPaint.py:1003
+#: appTools/ToolNCC.py:850 appTools/ToolNCC.py:1312 appTools/ToolPaint.py:1003
 #: appTools/ToolPanelize.py:196 tclCommands/TclCommandBbox.py:71
 #: tclCommands/TclCommandNregions.py:71
 msgid "Object not found"
@@ -15236,7 +15243,7 @@ msgstr ""
 "von Objekten, die die Combobox 'Object' füllen."
 
 #: appTools/ToolCutOut.py:2074 appTools/ToolIsolation.py:3125
-#: appTools/ToolNCC.py:3939 appTools/ToolPaint.py:2901
+#: appTools/ToolNCC.py:3999 appTools/ToolPaint.py:2901
 msgid ""
 "Add a new tool to the Tool Table\n"
 "with the diameter specified above.\n"
@@ -16499,7 +16506,7 @@ msgstr "Neues Werkzeug"
 msgid "Adding Tool cancelled"
 msgstr "Addierwerkzeug abgebrochen"
 
-#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:879
+#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:881
 #: appTools/ToolOptimal.py:179
 msgid ""
 "The Gerber object has one Polygon as geometry.\n"
@@ -16508,7 +16515,7 @@ msgstr ""
 "Das Gerber-Objekt hat ein Polygon als Geometrie.\n"
 "Es sind keine Abstände zwischen Geometrieelementen zu finden."
 
-#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:924
+#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:926
 #, fuzzy
 #| msgid "tooldia = tool diameter"
 msgid "Optimal tool diameter found"
@@ -16516,7 +16523,7 @@ msgstr "tooldia = Werkzeugdurchmesser"
 
 #: appTools/ToolIsolation.py:1000 appTools/ToolIsolation.py:1508
 #: appTools/ToolIsolation.py:1710 appTools/ToolIsolation.py:1897
-#: appTools/ToolNCC.py:935 appTools/ToolNCC.py:1343 appTools/ToolPaint.py:1031
+#: appTools/ToolNCC.py:937 appTools/ToolNCC.py:1345 appTools/ToolPaint.py:1031
 #: appTools/ToolPaint.py:1744
 #, fuzzy
 #| msgid "Failed. No tool selected in the tool table ..."
@@ -16530,45 +16537,45 @@ msgstr ""
 
 #: appTools/ToolIsolation.py:1057 appTools/ToolIsolation.py:1144
 #: appTools/ToolIsolation.py:1206 appTools/ToolIsolation.py:2626
-#: appTools/ToolNCC.py:999 appTools/ToolNCC.py:1087 appTools/ToolNCC.py:1149
-#: appTools/ToolNCC.py:3698 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
+#: appTools/ToolNCC.py:1001 appTools/ToolNCC.py:1089 appTools/ToolNCC.py:1151
+#: appTools/ToolNCC.py:3758 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
 #: appTools/ToolPaint.py:844 appTools/ToolPaint.py:2676
 #: appTools/ToolSolderPaste.py:488
 msgid "Cancelled. Tool already in Tool Table."
 msgstr "Abgebrochen. Werkzeug bereits in der Werkzeugtabelle."
 
-#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1115
+#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1117
 #: appTools/ToolPaint.py:810
 #, fuzzy
 #| msgid "New tool added to Tool Table."
 msgid "New tool added to Tool Table from Tools Database."
 msgstr "Neues Werkzeug zur Werkzeugtabelle hinzugefügt."
 
-#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1179
+#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1181
 #: appTools/ToolPaint.py:873
 #, fuzzy
 #| msgid "New tool added to Tool Table."
 msgid "Default tool added to Tool Table."
 msgstr "Neues Werkzeug zur Werkzeugtabelle hinzugefügt."
 
-#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1205
+#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1207
 #: appTools/ToolPaint.py:898
 msgid "Tool from Tool Table was edited."
 msgstr "Werkzeug aus Werkzeugtabelle wurde bearbeitet."
 
-#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1218
+#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1220
 #: appTools/ToolPaint.py:911 appTools/ToolSolderPaste.py:548
 msgid "Cancelled. New diameter value is already in the Tool Table."
 msgstr ""
 "Abgebrochen. Der neue Durchmesserwert befindet sich bereits in der "
 "Werkzeugtabelle."
 
-#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1269
+#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1271
 #: appTools/ToolPaint.py:961
 msgid "Delete failed. Select a tool to delete."
 msgstr "Löschen fehlgeschlagen. Wählen Sie ein Werkzeug zum Löschen aus."
 
-#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1275
+#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1277
 #: appTools/ToolPaint.py:967
 msgid "Tool(s) deleted from Tool Table."
 msgstr "Werkzeug(e) aus der Werkzeugtabelle gelöscht."
@@ -16664,12 +16671,12 @@ msgstr "Kein Polygon in der Auswahl."
 msgid "Click the end point of the paint area."
 msgstr "Klicken Sie auf den Endpunkt des Malbereichs."
 
-#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3662
+#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3722
 #: appTools/ToolPaint.py:2633 app_Main.py:5773 app_Main.py:5783
 msgid "Tool from DB added in Tool Table."
 msgstr "Werkzeug aus Werkzeugdatenbank zur Werkzeugtabelle hinzugefügt."
 
-#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3715
+#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3775
 #: appTools/ToolPaint.py:2693
 msgid "New tool added to Tool Table."
 msgstr "Neues Werkzeug zur Werkzeugtabelle hinzugefügt."
@@ -16678,7 +16685,7 @@ msgstr "Neues Werkzeug zur Werkzeugtabelle hinzugefügt."
 msgid "Gerber object for isolation routing."
 msgstr "Gerber-Objekt für Isolationsrouting."
 
-#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3815
+#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3875
 msgid ""
 "Tools pool from which the algorithm\n"
 "will pick the ones used for copper clearing."
@@ -16704,7 +16711,7 @@ msgstr ""
 "Werkzeugen\n"
 "Diese Funktion kann keine Routing-Geometrie erstellen."
 
-#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3839
+#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3899
 msgid ""
 "Tool Diameter. It's value (in current FlatCAM units)\n"
 "is the cut width into the material."
@@ -16712,7 +16719,7 @@ msgstr ""
 "Werkzeugdurchmesser. Wert (in aktuellen FlatCAM-Einheiten)\n"
 "ist die Schnittbreite in das Material."
 
-#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3843
+#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3903
 msgid ""
 "The Tool Type (TT) can be:\n"
 "- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
@@ -16747,19 +16754,19 @@ msgstr ""
 "Operationstyp ausgewählt\n"
 "in der resultierenden Geometrie als Isolation."
 
-#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3923
+#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3983
 #, fuzzy
 #| msgid "Optimal Tool"
 msgid "Optimal"
 msgstr "Optimierungswerkzeug"
 
-#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3927
+#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3987
 msgid ""
 "Find a tool diameter that is guaranteed\n"
 "to do a complete isolation."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:3967
+#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:4027
 #: appTools/ToolPaint.py:2929 appTools/ToolSolderPaste.py:1211
 msgid ""
 "Delete a selection of tools in the Tool Table\n"
@@ -16784,7 +16791,7 @@ msgstr ""
 msgid "Object whose area will be removed from isolation geometry."
 msgstr "Objekt, dessen Bereich aus der Isolationsgeometrie entfernt wird."
 
-#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4259
+#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4319
 msgid ""
 "The type of FlatCAM object to be used as non copper clearing reference.\n"
 "It can be Gerber, Excellon or Geometry."
@@ -16873,109 +16880,109 @@ msgstr "Keine Objekte ausgewählt."
 msgid "Error when mouse left click."
 msgstr "Fehler beim Klicken mit der linken Maustaste."
 
-#: appTools/ToolNCC.py:835
+#: appTools/ToolNCC.py:837
 msgid "NCC Tool. Checking tools for validity."
 msgstr ""
 
-#: appTools/ToolNCC.py:947
+#: appTools/ToolNCC.py:949
 msgid ""
 "Incomplete isolation. None of the selected tools could do a complete "
 "isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:950
+#: appTools/ToolNCC.py:952
 msgid "At least one of the selected tools can do a complete isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:1722 appTools/ToolNCC.py:2646
+#: appTools/ToolNCC.py:1724 appTools/ToolNCC.py:2706
 msgid "NCC Tool. Preparing non-copper polygons."
 msgstr "NCC-Tool. Vorbereitung von kupferfreien Polygonen."
 
-#: appTools/ToolNCC.py:1782 appTools/ToolNCC.py:2774
+#: appTools/ToolNCC.py:1784 appTools/ToolNCC.py:2834
 msgid "NCC Tool. Calculate 'empty' area."
 msgstr "NCC-Tool. Berechnen Sie die \"leere\" Fläche."
 
-#: appTools/ToolNCC.py:1793 appTools/ToolNCC.py:1822 appTools/ToolNCC.py:1928
-#: appTools/ToolNCC.py:1941 appTools/ToolNCC.py:2787 appTools/ToolNCC.py:2892
-#: appTools/ToolNCC.py:2907 appTools/ToolNCC.py:3173 appTools/ToolNCC.py:3274
-#: appTools/ToolNCC.py:3289
+#: appTools/ToolNCC.py:1795 appTools/ToolNCC.py:1824 appTools/ToolNCC.py:1930
+#: appTools/ToolNCC.py:1943 appTools/ToolNCC.py:2847 appTools/ToolNCC.py:2952
+#: appTools/ToolNCC.py:2967 appTools/ToolNCC.py:3233 appTools/ToolNCC.py:3334
+#: appTools/ToolNCC.py:3349
 msgid "Buffering finished"
 msgstr "Pufferung beendet"
 
-#: appTools/ToolNCC.py:1797 appTools/ToolNCC.py:1826 appTools/ToolNCC.py:1932
-#: appTools/ToolNCC.py:1944 appTools/ToolNCC.py:2795 appTools/ToolNCC.py:2914
-#: appTools/ToolNCC.py:3180 appTools/ToolNCC.py:3296
+#: appTools/ToolNCC.py:1799 appTools/ToolNCC.py:1828 appTools/ToolNCC.py:1934
+#: appTools/ToolNCC.py:1946 appTools/ToolNCC.py:2855 appTools/ToolNCC.py:2974
+#: appTools/ToolNCC.py:3240 appTools/ToolNCC.py:3356
 msgid "Could not get the extent of the area to be non copper cleared."
 msgstr ""
 "Die Ausdehnung des nicht kupferhaltigen Bereichs konnte nicht gelöscht "
 "werden."
 
-#: appTools/ToolNCC.py:1805 appTools/ToolNCC.py:1955 appTools/ToolNCC.py:2925
+#: appTools/ToolNCC.py:1807 appTools/ToolNCC.py:1957 appTools/ToolNCC.py:2985
 msgid "NCC Tool. Finished calculation of 'empty' area."
 msgstr "NCC-Tool. Berechnung der 'leeren' Fläche beendet."
 
-#: appTools/ToolNCC.py:1858 appTools/ToolNCC.py:2822 appTools/ToolNCC.py:2899
-#: appTools/ToolNCC.py:3200 appTools/ToolNCC.py:3281
+#: appTools/ToolNCC.py:1860 appTools/ToolNCC.py:2882 appTools/ToolNCC.py:2959
+#: appTools/ToolNCC.py:3260 appTools/ToolNCC.py:3341
 msgid ""
 "Isolation geometry is broken. Margin is less than isolation tool diameter."
 msgstr ""
 "Die Isolationsgeometrie ist gebrochen. Der Rand ist kleiner als der "
 "Durchmesser des Isolationswerkzeugs."
 
-#: appTools/ToolNCC.py:1948 appTools/ToolNCC.py:2918 appTools/ToolNCC.py:3299
+#: appTools/ToolNCC.py:1950 appTools/ToolNCC.py:2978 appTools/ToolNCC.py:3359
 msgid "The selected object is not suitable for copper clearing."
 msgstr "Das ausgewählte Objekt ist nicht zum Löschen von Kupfer geeignet."
 
-#: appTools/ToolNCC.py:1998
+#: appTools/ToolNCC.py:2000
 msgid "Clearing the polygon with the method: lines."
 msgstr "Löschen des Polygons mit der Methode: Linien."
 
-#: appTools/ToolNCC.py:2008
+#: appTools/ToolNCC.py:2010
 msgid "Failed. Clearing the polygon with the method: seed."
 msgstr "Gescheitert. Löschen des Polygons mit der Methode: seed."
 
-#: appTools/ToolNCC.py:2017
+#: appTools/ToolNCC.py:2019
 msgid "Failed. Clearing the polygon with the method: standard."
 msgstr "Gescheitert. Löschen des Polygons mit der Methode: Standard."
 
-#: appTools/ToolNCC.py:2033
+#: appTools/ToolNCC.py:2035
 #, fuzzy
 #| msgid "Geometry could not be cleared completely"
 msgid "Polygon could not be cleared. Location:"
 msgstr "Die Geometrie konnte nicht vollständig gelöscht werden"
 
-#: appTools/ToolNCC.py:2065 appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2595
-#: appTools/ToolNCC.py:2597
+#: appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2069 appTools/ToolNCC.py:2655
+#: appTools/ToolNCC.py:2657
 msgid "Non-Copper clearing ..."
 msgstr "Nicht-Kupfer-Clearing ..."
 
-#: appTools/ToolNCC.py:2086
+#: appTools/ToolNCC.py:2088
 msgid ""
 "There is no copper clearing tool in the selection and at least one is needed."
 msgstr ""
 
-#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2742
+#: appTools/ToolNCC.py:2103 appTools/ToolNCC.py:2802
 msgid ""
 "NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
 msgstr ""
 "NCC-Tool. Fertige kupferfreie Polygone. Normale Kupferentfernungsaufgabe "
 "gestartet."
 
-#: appTools/ToolNCC.py:2129 appTools/ToolNCC.py:2363
+#: appTools/ToolNCC.py:2131 appTools/ToolNCC.py:2365
 msgid "NCC Tool failed creating bounding box."
 msgstr "Das NCC-Tool konnte keinen Begrenzungsrahmen erstellen."
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "NCC Tool clearing with tool diameter"
 msgstr "Das NCC-Werkzeug wird mit dem Werkzeugdurchmesser gelöscht"
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "started."
 msgstr "gestartet."
 
-#: appTools/ToolNCC.py:2277
+#: appTools/ToolNCC.py:2279
 #, fuzzy
 #| msgid "Could not get the extent of the area to be non copper cleared."
 msgid "Could not use the tool for copper clear."
@@ -16983,7 +16990,7 @@ msgstr ""
 "Die Ausdehnung des nicht kupferhaltigen Bereichs konnte nicht gelöscht "
 "werden."
 
-#: appTools/ToolNCC.py:2299 appTools/ToolNCC.py:3099
+#: appTools/ToolNCC.py:2301 appTools/ToolNCC.py:3159
 msgid ""
 "There is no NCC Geometry in the file.\n"
 "Usually it means that the tool diameter is too big for the painted "
@@ -16995,32 +17002,32 @@ msgstr ""
 "Geometrie zu groß ist.\n"
 "Ändern Sie die Malparameter und versuchen Sie es erneut."
 
-#: appTools/ToolNCC.py:2309 appTools/ToolNCC.py:3108
+#: appTools/ToolNCC.py:2311 appTools/ToolNCC.py:3168
 msgid "NCC Tool clear all done."
 msgstr "NCC Tool löschen alles erledigt."
 
-#: appTools/ToolNCC.py:2312 appTools/ToolNCC.py:3111
+#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:3171
 msgid "NCC Tool clear all done but the copper features isolation is broken for"
 msgstr ""
 "Das NCC-Tool löscht alles, aber die Isolierung der Kupfermerkmale ist "
 "unterbrochen"
 
-#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:2510 appTools/ToolNCC.py:3113
-#: appTools/ToolNCC.py:3496
+#: appTools/ToolNCC.py:2316 appTools/ToolNCC.py:2570 appTools/ToolNCC.py:3173
+#: appTools/ToolNCC.py:3556
 msgid "tools"
 msgstr "Werkzeuge"
 
-#: appTools/ToolNCC.py:2341
+#: appTools/ToolNCC.py:2343
 #, fuzzy
 #| msgid "Paint Tool. Rest machining painting area task started."
 msgid "NCC Tool. Rest machining copper clearing task started."
 msgstr "Malwerkzeug. Restbearbeitung Lackierbereich Aufgabe gestartet."
 
-#: appTools/ToolNCC.py:2506 appTools/ToolNCC.py:3492
+#: appTools/ToolNCC.py:2566 appTools/ToolNCC.py:3552
 msgid "NCC Tool Rest Machining clear all done."
 msgstr "Die Bearbeitung der NCC-Werkzeugablagen ist abgeschlossen."
 
-#: appTools/ToolNCC.py:2509 appTools/ToolNCC.py:3495
+#: appTools/ToolNCC.py:2569 appTools/ToolNCC.py:3555
 msgid ""
 "NCC Tool Rest Machining clear all done but the copper features isolation is "
 "broken for"
@@ -17028,11 +17035,11 @@ msgstr ""
 "Die Bearbeitung der NCC-Werkzeugablagen ist abgeschlossen, die Isolierung "
 "der Kupferelemente ist jedoch unterbrochen"
 
-#: appTools/ToolNCC.py:2607
+#: appTools/ToolNCC.py:2667
 msgid "NCC Tool started. Reading parameters."
 msgstr "NCC Tool gestartet. Parameter lesen."
 
-#: appTools/ToolNCC.py:3594
+#: appTools/ToolNCC.py:3654
 msgid ""
 "Try to use the Buffering Type = Full in Preferences -> Gerber General. "
 "Reload the Gerber file after this change."
@@ -17040,15 +17047,15 @@ msgstr ""
 "Versuchen Sie, den Puffertyp = Voll in Einstellungen -> Allgemein zu "
 "verwenden. Laden Sie die Gerber-Datei nach dieser Änderung neu."
 
-#: appTools/ToolNCC.py:3750
+#: appTools/ToolNCC.py:3810
 msgid "Non-Copper Clearing"
 msgstr "Nicht-Kupfer-Clearing"
 
-#: appTools/ToolNCC.py:3779 appTools/ToolPaint.py:2765
+#: appTools/ToolNCC.py:3839 appTools/ToolPaint.py:2765
 msgid "Obj Type"
 msgstr "Obj-Typ"
 
-#: appTools/ToolNCC.py:3781
+#: appTools/ToolNCC.py:3841
 msgid ""
 "Specify the type of object to be cleared of excess copper.\n"
 "It can be of type: Gerber or Geometry.\n"
@@ -17061,11 +17068,11 @@ msgstr ""
 "Was hier ausgewählt wird, bestimmt die Art\n"
 "von Objekten, die das Kombinationsfeld \"Objekt\" füllen."
 
-#: appTools/ToolNCC.py:3803
+#: appTools/ToolNCC.py:3863
 msgid "Object to be cleared of excess copper."
 msgstr "Objekt, das von überschüssigem Kupfer befreit werden soll."
 
-#: appTools/ToolNCC.py:3831
+#: appTools/ToolNCC.py:3891
 msgid ""
 "This is the Tool Number.\n"
 "Non copper clearing will start with the tool with the biggest \n"
@@ -18183,6 +18190,12 @@ msgstr "Löschen Sie den Text."
 msgid "...processing..."
 msgstr "...wird bearbeitet..."
 
+#: appTools/ToolShell.py:293
+#, fuzzy
+#| msgid "FlatCAM Beta"
+msgid "FlatCAM Shell"
+msgstr "FlatCAM Beta"
+
 #: appTools/ToolSolderPaste.py:459
 msgid "Please enter a tool diameter to add, in Float format."
 msgstr ""
@@ -18783,6 +18796,10 @@ msgstr ""
 "Geometrie ist nicht möglich.\n"
 "Bearbeiten Sie jeweils nur eine Geometrie."
 
+#: app_Main.py:2261
+msgid "EDITOR Area"
+msgstr ""
+
 #: app_Main.py:2263
 msgid "Editor is activated ..."
 msgstr "Editor wurde aktiviert ..."
diff --git a/locale/en/LC_MESSAGES/strings.mo b/locale/en/LC_MESSAGES/strings.mo
index 7bcb945c..d0256d01 100644
Binary files a/locale/en/LC_MESSAGES/strings.mo and b/locale/en/LC_MESSAGES/strings.mo differ
diff --git a/locale/en/LC_MESSAGES/strings.po b/locale/en/LC_MESSAGES/strings.po
index 1abd8b9d..b71009d7 100644
--- a/locale/en/LC_MESSAGES/strings.po
+++ b/locale/en/LC_MESSAGES/strings.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
-"POT-Creation-Date: 2020-10-22 15:07+0300\n"
-"PO-Revision-Date: 2020-10-22 15:07+0300\n"
+"POT-Creation-Date: 2020-10-22 22:01+0300\n"
+"PO-Revision-Date: 2020-10-22 22:02+0300\n"
 "Last-Translator: \n"
 "Language-Team: \n"
 "Language: en\n"
@@ -108,7 +108,7 @@ msgstr "Bookmarks"
 #: appDatabase.py:2998 appDatabase.py:3044 appEditors/AppExcEditor.py:1023
 #: appEditors/AppExcEditor.py:1091 appEditors/AppTextEditor.py:263
 #: appGUI/MainGUI.py:2878 appGUI/MainGUI.py:3100 appGUI/MainGUI.py:3315
-#: appObjects/FlatCAMCNCJob.py:1745 appObjects/ObjectCollection.py:126
+#: appObjects/FlatCAMCNCJob.py:1750 appObjects/ObjectCollection.py:126
 #: appTools/ToolFilm.py:238 appTools/ToolFilm.py:384 appTools/ToolImage.py:112
 #: appTools/ToolMove.py:269 appTools/ToolPcbWizard.py:189
 #: appTools/ToolPcbWizard.py:212 appTools/ToolQRCode.py:526
@@ -124,8 +124,8 @@ msgid "Cancelled."
 msgstr "Cancelled."
 
 #: Bookmark.py:308 appDatabase.py:673 appDatabase.py:3006
-#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1667
-#: appObjects/FlatCAMCNCJob.py:1857 appObjects/FlatCAMCNCJob.py:2306
+#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1672
+#: appObjects/FlatCAMCNCJob.py:1862 appObjects/FlatCAMCNCJob.py:2311
 #: appTools/ToolFilm.py:582 appTools/ToolFilm.py:830
 #: appTools/ToolSolderPaste.py:1097 app_Main.py:2666 app_Main.py:8451
 #: app_Main.py:8499 app_Main.py:8628 app_Main.py:8765 app_Main.py:8833
@@ -161,24 +161,24 @@ msgid "The user requested a graceful exit of the current task."
 msgstr "The user requested a graceful exit of the current task."
 
 #: appCommon/Common.py:292 appTools/ToolCopperThieving.py:328
-#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1364
+#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1366
 msgid "Click the start point of the area."
 msgstr "Click the start point of the area."
 
-#: appCommon/Common.py:351 appTools/ToolNCC.py:1423 appTools/ToolPaint.py:1210
+#: appCommon/Common.py:351 appTools/ToolNCC.py:1425 appTools/ToolPaint.py:1210
 msgid "Click the end point of the area."
 msgstr "Click the end point of the area."
 
 #: appCommon/Common.py:357 appCommon/Common.py:459
 #: appTools/ToolCopperThieving.py:385 appTools/ToolIsolation.py:2348
-#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1429
-#: appTools/ToolNCC.py:1481 appTools/ToolPaint.py:1216
+#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1431
+#: appTools/ToolNCC.py:1483 appTools/ToolPaint.py:1216
 #: appTools/ToolPaint.py:1267
 msgid "Zone added. Click to start adding next zone or right click to finish."
 msgstr "Zone added. Click to start adding next zone or right click to finish."
 
 #: appCommon/Common.py:404 appEditors/AppGeoEditor.py:2352
-#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1452
+#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1454
 #: appTools/ToolPaint.py:1238
 msgid "Click on next Point or click right mouse button to complete ..."
 msgstr "Click on next Point or click right mouse button to complete ..."
@@ -281,7 +281,7 @@ msgstr "Tool Name"
 #: appGUI/ObjectUI.py:1082 appGUI/ObjectUI.py:1650
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:130
 #: appTools/ToolCutOut.py:2060 appTools/ToolIsolation.py:3091
-#: appTools/ToolNCC.py:3906 appTools/ToolNCC.py:3917 appTools/ToolPaint.py:2882
+#: appTools/ToolNCC.py:3966 appTools/ToolNCC.py:3977 appTools/ToolPaint.py:2882
 msgid "Tool Dia"
 msgstr "Tool Dia"
 
@@ -694,13 +694,13 @@ msgstr ""
 #: appDatabase.py:307 appDatabase.py:684 appDatabase.py:718 appDatabase.py:2647
 #: appDatabase.py:3017 appDatabase.py:3051 appTools/ToolCutOut.py:294
 #: appTools/ToolDrilling.py:895 appTools/ToolIsolation.py:1067
-#: appTools/ToolNCC.py:1009 appTools/ToolPaint.py:704
+#: appTools/ToolNCC.py:1011 appTools/ToolPaint.py:704
 msgid "Could not load Tools DB file."
 msgstr "Could not load Tools DB file."
 
 #: appDatabase.py:315 appDatabase.py:726 appDatabase.py:2655
 #: appDatabase.py:3059 appTools/ToolCutOut.py:305 appTools/ToolDrilling.py:903
-#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1020
+#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1022
 #: appTools/ToolPaint.py:715
 msgid "Failed to parse Tools DB file."
 msgstr "Failed to parse Tools DB file."
@@ -759,7 +759,7 @@ msgstr "Import FlatCAM Tools DB"
 #: appDatabase.py:3464 appObjects/FlatCAMGeometry.py:1089
 #: appTools/ToolCutOut.py:484 appTools/ToolCutOut.py:525
 #: appTools/ToolIsolation.py:2583 appTools/ToolIsolation.py:2667
-#: appTools/ToolNCC.py:3655 appTools/ToolNCC.py:3735 appTools/ToolPaint.py:2626
+#: appTools/ToolNCC.py:3715 appTools/ToolNCC.py:3795 appTools/ToolPaint.py:2626
 #: appTools/ToolPaint.py:2715 app_Main.py:5676 app_Main.py:5718
 #: app_Main.py:5749 app_Main.py:5769 app_Main.py:5779
 msgid "Tools Database"
@@ -807,7 +807,7 @@ msgstr "Cutout Parameters"
 
 #: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
 #: appGUI/ObjectUI.py:570 appGUI/ObjectUI.py:894 appGUI/ObjectUI.py:1876
-#: appGUI/ObjectUI.py:2681 appGUI/ObjectUI.py:2748
+#: appGUI/ObjectUI.py:2693 appGUI/ObjectUI.py:2760
 #: appTools/ToolCalibration.py:929 appTools/ToolFiducials.py:681
 msgid "Name"
 msgstr "Name"
@@ -820,7 +820,7 @@ msgstr "Name"
 #: appTools/ToolDrilling.py:2065 appTools/ToolIsolation.py:3022
 #: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
 #: appTools/ToolMilling.py:1360 appTools/ToolMilling.py:1670
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 #: appTools/ToolPcbWizard.py:404 appTools/ToolProperties.py:417
 #: appTools/ToolProperties.py:480 appTools/ToolSolderPaste.py:1166
 #: tclCommands/TclCommandDrillcncjob.py:195
@@ -857,7 +857,7 @@ msgstr "Set the tool tolerance maximum."
 
 #: appDatabase.py:1186 appDatabase.py:1504
 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46
-#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:3990
+#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:4050
 msgid "Operation"
 msgstr "Operation"
 
@@ -884,7 +884,7 @@ msgstr "Drilling"
 
 #: appDatabase.py:1192 appDatabase.py:1514 appDatabase.py:2761
 #: appDatabase.py:3095 appTools/ToolIsolation.py:1101
-#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4000
+#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4060
 msgid "Isolation"
 msgstr "Isolation"
 
@@ -895,7 +895,7 @@ msgid "Paint"
 msgstr "Paint"
 
 #: appDatabase.py:1192 appDatabase.py:2773 appDatabase.py:3111
-#: appTools/ToolNCC.py:1044 appTools/ToolNCC.py:3648
+#: appTools/ToolNCC.py:1046 appTools/ToolNCC.py:3708
 msgid "NCC"
 msgstr "NCC"
 
@@ -910,7 +910,7 @@ msgstr "Cutout"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:303
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:284
-#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4283
+#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4343
 #: appTools/ToolPaint.py:3163
 msgid "Shape"
 msgstr "Shape"
@@ -947,7 +947,7 @@ msgstr ""
 "Feedrate Z\n"
 "The speed on Z plane."
 
-#: appDatabase.py:1506 appTools/ToolNCC.py:3992
+#: appDatabase.py:1506 appTools/ToolNCC.py:4052
 msgid ""
 "The 'Operation' can be:\n"
 "- Isolation -> will ensure that the non-copper clearing is always complete.\n"
@@ -960,7 +960,7 @@ msgstr ""
 "- Clear -> the regular non-copper clearing."
 
 #: appDatabase.py:1513 appEditors/AppGerberEditor.py:2749
-#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:3999
+#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:4059
 msgid "Clear"
 msgstr "Clear"
 
@@ -970,7 +970,7 @@ msgstr "Clear"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137
 #: appTools/ToolIsolation.py:3204 appTools/ToolMilling.py:1760
-#: appTools/ToolNCC.py:4008
+#: appTools/ToolNCC.py:4068
 msgid "Milling Type"
 msgstr "Milling Type"
 
@@ -980,7 +980,7 @@ msgstr "Milling Type"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147
 #: appTools/ToolIsolation.py:3206 appTools/ToolIsolation.py:3214
-#: appTools/ToolNCC.py:4010 appTools/ToolNCC.py:4018
+#: appTools/ToolNCC.py:4070 appTools/ToolNCC.py:4078
 msgid ""
 "Milling type when the selected tool is of type: 'iso_op':\n"
 "- climb / best for precision milling and to reduce tool usage\n"
@@ -994,7 +994,7 @@ msgstr ""
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144
-#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4015
+#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4075
 msgid "Climb"
 msgstr "Climb"
 
@@ -1002,7 +1002,7 @@ msgstr "Climb"
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:190
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145
-#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4016
+#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4076
 msgid "Conventional"
 msgstr "Conventional"
 
@@ -1013,12 +1013,12 @@ msgstr "Conventional"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:161
 #: appTools/ToolDrilling.py:2312 appTools/ToolIsolation.py:3189
-#: appTools/ToolNCC.py:4031 appTools/ToolPaint.py:2955
+#: appTools/ToolNCC.py:4091 appTools/ToolPaint.py:2955
 msgid "Overlap"
 msgstr "Overlap"
 
 #: appDatabase.py:1544 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
-#: appTools/ToolNCC.py:4033
+#: appTools/ToolNCC.py:4093
 msgid ""
 "How much (percentage) of the tool width to overlap each tool pass.\n"
 "Adjust the value starting with lower values\n"
@@ -1049,8 +1049,8 @@ msgstr ""
 #: appTools/ToolCopperThieving.py:1204 appTools/ToolCopperThieving.py:1455
 #: appTools/ToolCorners.py:411 appTools/ToolCutOut.py:2157
 #: appTools/ToolFiducials.py:786 appTools/ToolInvertGerber.py:234
-#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4075
-#: appTools/ToolNCC.py:4178
+#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4135
+#: appTools/ToolNCC.py:4238
 msgid "Margin"
 msgstr "Margin"
 
@@ -1061,25 +1061,25 @@ msgstr "Margin"
 #: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204
 #: appTools/ToolCopperThieving.py:1206 appTools/ToolCorners.py:413
-#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4077
-#: appTools/ToolNCC.py:4180
+#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4137
+#: appTools/ToolNCC.py:4240
 msgid "Bounding box margin."
 msgstr "Bounding box margin."
 
 #: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
-#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2172
+#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2184
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
 #: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:196
-#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4052
+#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4112
 #: appTools/ToolPaint.py:2991 appTools/ToolPunchGerber.py:793
 msgid "Method"
 msgstr "Method"
 
 #: appDatabase.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
-#: appTools/ToolNCC.py:4054
+#: appTools/ToolNCC.py:4114
 msgid ""
 "Algorithm for copper clearing:\n"
 "- Standard: Fixed step inwards.\n"
@@ -1094,7 +1094,7 @@ msgstr ""
 #: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1963 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1456
+#: appTools/ToolNCC.py:1965 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1456
 #: appTools/ToolPaint.py:3016 defaults.py:346
 #: tclCommands/TclCommandCopperClear.py:126
 #: tclCommands/TclCommandCopperClear.py:134 tclCommands/TclCommandPaint.py:125
@@ -1105,7 +1105,7 @@ msgstr "Standard"
 #: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1974 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1470
+#: appTools/ToolNCC.py:1976 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1470
 #: appTools/ToolPaint.py:3016 defaults.py:469 defaults.py:507
 #: tclCommands/TclCommandCopperClear.py:128
 #: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
@@ -1116,7 +1116,7 @@ msgstr "Seed"
 #: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1702
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1985 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:160
+#: appTools/ToolNCC.py:1987 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:160
 #: appTools/ToolPaint.py:1484 appTools/ToolPaint.py:3016
 #: tclCommands/TclCommandCopperClear.py:130 tclCommands/TclCommandPaint.py:129
 msgid "Lines"
@@ -1125,24 +1125,24 @@ msgstr "Lines"
 #: appDatabase.py:1586 appDatabase.py:1701
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1996 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1649
+#: appTools/ToolNCC.py:1998 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1649
 #: appTools/ToolPaint.py:3016 tclCommands/TclCommandPaint.py:133
 msgid "Combo"
 msgstr "Combo"
 
 #: appDatabase.py:1594 appDatabase.py:1712 appEditors/AppGeoEditor.py:505
-#: appGUI/ObjectUI.py:2257 appGUI/ObjectUI.py:2280
+#: appGUI/ObjectUI.py:2269 appGUI/ObjectUI.py:2292
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:222
-#: appObjects/FlatCAMCNCJob.py:1300 appObjects/FlatCAMCNCJob.py:1322
-#: appTools/ToolNCC.py:4088 appTools/ToolNCC.py:4191 appTools/ToolPaint.py:3027
+#: appObjects/FlatCAMCNCJob.py:1305 appObjects/FlatCAMCNCJob.py:1327
+#: appTools/ToolNCC.py:4148 appTools/ToolNCC.py:4251 appTools/ToolPaint.py:3027
 msgid "Connect"
 msgstr "Connect"
 
 #: appDatabase.py:1598 appDatabase.py:1715 appEditors/AppGeoEditor.py:507
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
-#: appTools/ToolNCC.py:4092 appTools/ToolNCC.py:4193 appTools/ToolPaint.py:3030
+#: appTools/ToolNCC.py:4152 appTools/ToolNCC.py:4253 appTools/ToolPaint.py:3030
 msgid ""
 "Draw lines between resulting\n"
 "segments to minimize tool lifts."
@@ -1153,14 +1153,14 @@ msgstr ""
 #: appDatabase.py:1604 appDatabase.py:1719 appEditors/AppGeoEditor.py:515
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:230
-#: appTools/ToolNCC.py:4098 appTools/ToolNCC.py:4199 appTools/ToolPaint.py:3034
+#: appTools/ToolNCC.py:4158 appTools/ToolNCC.py:4259 appTools/ToolPaint.py:3034
 msgid "Contour"
 msgstr "Contour"
 
 #: appDatabase.py:1608 appDatabase.py:1722 appEditors/AppGeoEditor.py:517
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232
-#: appTools/ToolNCC.py:4102 appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3037
+#: appTools/ToolNCC.py:4162 appTools/ToolNCC.py:4261 appTools/ToolPaint.py:3037
 msgid ""
 "Cut around the perimeter of the polygon\n"
 "to trim rough edges."
@@ -1174,13 +1174,13 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
 #: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
-#: appTools/ToolNCC.py:4108 appTools/ToolNCC.py:4207 appTools/ToolPaint.py:2976
+#: appTools/ToolNCC.py:4168 appTools/ToolNCC.py:4267 appTools/ToolPaint.py:2976
 #: appTools/ToolPaint.py:3083 appTools/ToolTransform.py:517
 msgid "Offset"
 msgstr "Offset"
 
 #: appDatabase.py:1618 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
-#: appTools/ToolNCC.py:4112 appTools/ToolNCC.py:4209
+#: appTools/ToolNCC.py:4172 appTools/ToolNCC.py:4269
 msgid ""
 "If used, it will add an offset to the copper features.\n"
 "The copper clearing will finish to a distance\n"
@@ -1663,7 +1663,7 @@ msgstr ""
 #: appTools/ToolInvertGerber.py:304 appTools/ToolInvertGerber.py:315
 #: appTools/ToolIsolation.py:3494 appTools/ToolIsolation.py:3505
 #: appTools/ToolMilling.py:2341 appTools/ToolMilling.py:2352
-#: appTools/ToolNCC.py:4448 appTools/ToolNCC.py:4459
+#: appTools/ToolNCC.py:4508 appTools/ToolNCC.py:4519
 #: appTools/ToolOptimal.py:614 appTools/ToolOptimal.py:625
 #: appTools/ToolPaint.py:3267 appTools/ToolPaint.py:3278
 #: appTools/ToolPanelize.py:914 appTools/ToolPanelize.py:925
@@ -1699,7 +1699,7 @@ msgstr "Edited value is out of range"
 #: appTools/ToolInvertGerber.py:310 appTools/ToolInvertGerber.py:317
 #: appTools/ToolIsolation.py:3500 appTools/ToolIsolation.py:3507
 #: appTools/ToolMilling.py:2347 appTools/ToolMilling.py:2354
-#: appTools/ToolNCC.py:4454 appTools/ToolNCC.py:4461
+#: appTools/ToolNCC.py:4514 appTools/ToolNCC.py:4521
 #: appTools/ToolOptimal.py:620 appTools/ToolOptimal.py:627
 #: appTools/ToolPaint.py:3273 appTools/ToolPaint.py:3280
 #: appTools/ToolPanelize.py:920 appTools/ToolPanelize.py:927
@@ -1848,8 +1848,8 @@ msgstr "Total Slots"
 #: appEditors/AppExcEditor.py:2003 appObjects/FlatCAMGeometry.py:706
 #: appObjects/FlatCAMGeometry.py:1232 appObjects/FlatCAMGeometry.py:1974
 #: appObjects/FlatCAMGeometry.py:2633 appTools/ToolIsolation.py:1252
-#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1195
-#: appTools/ToolNCC.py:1332 appTools/ToolPaint.py:889
+#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1197
+#: appTools/ToolNCC.py:1334 appTools/ToolPaint.py:889
 #: appTools/ToolPaint.py:1027 appTools/ToolPaint.py:1740
 #: appTools/ToolSolderPaste.py:455 appTools/ToolSolderPaste.py:527
 msgid "Wrong value format entered, use a number."
@@ -1932,7 +1932,7 @@ msgstr "Name:"
 
 #: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:620
 #: appGUI/ObjectUI.py:967 appTools/ToolIsolation.py:3010
-#: appTools/ToolNCC.py:3813 appTools/ToolPaint.py:2800
+#: appTools/ToolNCC.py:3873 appTools/ToolPaint.py:2800
 #: appTools/ToolSolderPaste.py:1155
 msgid "Tools Table"
 msgstr "Tools Table"
@@ -1967,7 +1967,7 @@ msgstr ""
 
 #: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1084
 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
-#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3908
+#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3968
 msgid "Diameter for the new tool"
 msgstr "Diameter for the new tool"
 
@@ -2335,7 +2335,7 @@ msgstr "Round"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:289
 #: appTools/ToolDrilling.py:2588 appTools/ToolExtractDrills.py:486
 #: appTools/ToolExtractDrills.py:619 appTools/ToolIsolation.py:3430
-#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4288
+#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4348
 #: appTools/ToolPaint.py:3168 appTools/ToolPunchGerber.py:759
 #: appTools/ToolPunchGerber.py:909 appTools/ToolQRCode.py:788
 msgid "Square"
@@ -2378,6 +2378,17 @@ msgstr "Text Input Tool"
 msgid "Font"
 msgstr "Font"
 
+#: appEditors/AppGeoEditor.py:313 appEditors/AppGerberEditor.py:2495
+#: appEditors/AppGerberEditor.py:3968 appGUI/ObjectUI.py:316
+#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
+#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
+#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
+#: appTools/ToolFiducials.py:770
+msgid "Size"
+msgstr "Size"
+
 #: appEditors/AppGeoEditor.py:322 appGUI/MainGUI.py:1502
 msgid "Text"
 msgstr "Text"
@@ -2397,7 +2408,7 @@ msgstr "Text Tool"
 #: appTools/ToolIsolation.py:697 appTools/ToolIsolation.py:3166
 #: appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
 #: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:329
-#: appTools/ToolNCC.py:2278 appTools/ToolNCC.py:3980 appTools/ToolPaint.py:304
+#: appTools/ToolNCC.py:2280 appTools/ToolNCC.py:4040 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:2940
 msgid "Tool"
 msgstr "Tool"
@@ -2525,7 +2536,7 @@ msgstr "Origin"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:256
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
-#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4244
+#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4304
 #: appTools/ToolPaint.py:3097 appTools/ToolTransform.py:557 defaults.py:566
 msgid "Selection"
 msgstr "Selection"
@@ -2561,7 +2572,7 @@ msgid "A point of reference in format X,Y."
 msgstr "A point of reference in format X,Y."
 
 #: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
-#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2338
+#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2350
 #: appTools/ToolDblSided.py:706 appTools/ToolDblSided.py:892
 #: appTools/ToolNCC.py:63 appTools/ToolPaint.py:137
 #: appTools/ToolSolderPaste.py:160 appTools/ToolSolderPaste.py:1203
@@ -2865,7 +2876,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70
 #: appTools/ToolCalibration.py:881 appTools/ToolDrilling.py:2540
 #: appTools/ToolFilm.py:931 appTools/ToolMilling.py:2218
-#: appTools/ToolNCC.py:3802 appTools/ToolPaint.py:2788
+#: appTools/ToolNCC.py:3862 appTools/ToolPaint.py:2788
 #: appTools/ToolPanelize.py:697 appTools/ToolTransform.py:557
 msgid "Object"
 msgstr "Object"
@@ -3276,7 +3287,7 @@ msgstr "Line"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290
 #: appTools/ToolDrilling.py:2589 appTools/ToolIsolation.py:3431
-#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4289
+#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4349
 #: appTools/ToolPaint.py:3169
 msgid "Polygon"
 msgstr "Polygon"
@@ -3311,7 +3322,7 @@ msgstr "Click on target point."
 msgid "Editing MultiGeo Geometry, tool"
 msgstr "Editing MultiGeo Geometry, tool"
 
-#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2280
+#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2282
 msgid "with diameter"
 msgstr "with diameter"
 
@@ -3528,17 +3539,6 @@ msgstr "Apertures Table for the Gerber Object."
 msgid "Code"
 msgstr "Code"
 
-#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:316
-#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
-#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
-#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
-#: appTools/ToolFiducials.py:770
-msgid "Size"
-msgstr "Size"
-
 #: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
 #: appGUI/ObjectUI.py:316
 msgid "Dim"
@@ -3641,7 +3641,7 @@ msgstr "Add a new aperture to the aperture list."
 #: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1132
 #: appObjects/FlatCAMGeometry.py:560 appTools/ToolIsolation.py:70
 #: appTools/ToolIsolation.py:3150 appTools/ToolNCC.py:69
-#: appTools/ToolNCC.py:3964 appTools/ToolPaint.py:143
+#: appTools/ToolNCC.py:4024 appTools/ToolPaint.py:143
 #: appTools/ToolPaint.py:2926 appTools/ToolSolderPaste.py:163
 #: appTools/ToolSolderPaste.py:1209 app_Main.py:6123
 msgid "Delete"
@@ -4051,20 +4051,20 @@ msgid "Open file"
 msgstr "Open file"
 
 #: appEditors/AppTextEditor.py:255 appEditors/AppTextEditor.py:260
-#: appObjects/FlatCAMCNCJob.py:1641 appObjects/FlatCAMCNCJob.py:1646
-#: appObjects/FlatCAMCNCJob.py:1831 appObjects/FlatCAMCNCJob.py:1836
-#: appObjects/FlatCAMCNCJob.py:1909 appObjects/FlatCAMCNCJob.py:1914
+#: appObjects/FlatCAMCNCJob.py:1646 appObjects/FlatCAMCNCJob.py:1651
+#: appObjects/FlatCAMCNCJob.py:1836 appObjects/FlatCAMCNCJob.py:1841
+#: appObjects/FlatCAMCNCJob.py:1914 appObjects/FlatCAMCNCJob.py:1919
 #: appTools/ToolSolderPaste.py:1063 app_Main.py:7038 app_Main.py:7043
 msgid "Export Code ..."
 msgstr "Export Code ..."
 
-#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1663
-#: appObjects/FlatCAMCNCJob.py:1853 appObjects/FlatCAMCNCJob.py:2302
+#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1668
+#: appObjects/FlatCAMCNCJob.py:1858 appObjects/FlatCAMCNCJob.py:2307
 #: appTools/ToolSolderPaste.py:1093
 msgid "No such file or directory"
 msgstr "No such file or directory"
 
-#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2316
+#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2321
 msgid "Saved to"
 msgstr "Saved to"
 
@@ -4088,7 +4088,7 @@ msgstr "Header GCode"
 msgid "Start GCode"
 msgstr "Start GCode"
 
-#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2007
+#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2012
 #: appTools/ToolCalibration.py:447
 msgid "Loaded Machine Code into Code Editor"
 msgstr "Loaded Machine Code into Code Editor"
@@ -4106,7 +4106,7 @@ msgstr "Dia"
 
 #: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:999
 #: appGUI/ObjectUI.py:2009 appTools/ToolIsolation.py:3022
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 msgid "TT"
 msgstr "TT"
 
@@ -5139,9 +5139,9 @@ msgstr "Zoom Out"
 msgid "Zoom Fit"
 msgstr "Zoom Fit"
 
-#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:2067
-msgid "&Command Line"
-msgstr "&Command Line"
+#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:1154
+msgid "Command Line"
+msgstr "Command Line"
 
 #: appGUI/MainGUI.py:924 appGUI/MainGUI.py:2079
 msgid "2Sided Tool"
@@ -5433,10 +5433,6 @@ msgstr "Toggle the display of axis on canvas"
 msgid "Preferences"
 msgstr "Preferences"
 
-#: appGUI/MainGUI.py:1154
-msgid "Command Line"
-msgstr "Command Line"
-
 #: appGUI/MainGUI.py:1160
 msgid "HUD (Heads up display)"
 msgstr "HUD (Heads up display)"
@@ -5465,11 +5461,17 @@ msgstr ""
 "Absolute measurement.\n"
 "Reference is (X=0, Y= 0) position"
 
+#: appGUI/MainGUI.py:1194
+#| msgid "Show Shell"
+msgid "TCL Shell"
+msgstr "TCL Shell"
+
 #: appGUI/MainGUI.py:1221 appGUI/MainGUI.py:1470 app_Main.py:8143
 msgid "Project"
 msgstr "Project"
 
-#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272
+#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272 appGUI/MainGUI.py:3791
+#: appGUI/MainGUI.py:3797
 msgid "Plot Area"
 msgstr "Plot Area"
 
@@ -5562,7 +5564,7 @@ msgstr "Will not save the changes and will close the preferences window."
 msgid "Toggle Visibility"
 msgstr "Toggle Visibility"
 
-#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2330
+#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2342
 msgid "New"
 msgstr "New"
 
@@ -5575,8 +5577,8 @@ msgstr "New"
 #: appTools/ToolDblSided.py:767 appTools/ToolFilm.py:929
 #: appTools/ToolFilm.py:952 appTools/ToolImage.py:136 appTools/ToolImage.py:191
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3338
-#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:803
-#: appTools/ToolNCC.py:3788 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:805
+#: appTools/ToolNCC.py:3848 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:587
@@ -5594,7 +5596,7 @@ msgstr "Geometry"
 #: appTools/ToolDblSided.py:527 appTools/ToolDblSided.py:724
 #: appTools/ToolDblSided.py:766 appTools/ToolFilm.py:1207
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPunchGerber.py:803 appTools/ToolPunchGerber.py:818
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:586
@@ -5711,12 +5713,16 @@ msgstr "Yes"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:148
 #: appTools/ToolDrilling.py:2090 appTools/ToolIsolation.py:3066
-#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3875
+#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3935
 #: appTools/ToolPaint.py:2851 appTranslation.py:113 appTranslation.py:215
 #: app_Main.py:2290 app_Main.py:3385 app_Main.py:5810 app_Main.py:6894
 msgid "No"
 msgstr "No"
 
+#: appGUI/MainGUI.py:2067
+msgid "&Command Line"
+msgstr "&Command Line"
+
 #: appGUI/MainGUI.py:2086
 msgid "&Cutout Tool"
 msgstr "&Cutout Tool"
@@ -6443,7 +6449,7 @@ msgstr ""
 "Create a Geometry object with\n"
 "toolpaths to cut around polygons."
 
-#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4315
+#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4375
 msgid ""
 "Create the Geometry Object\n"
 "for non-copper routing."
@@ -6460,12 +6466,10 @@ msgstr ""
 "the board cutout."
 
 #: appGUI/ObjectUI.py:407 appGUI/ObjectUI.py:756
-#| msgid "UTILITIES"
 msgid "UTILTIES"
 msgstr "UTILTIES"
 
 #: appGUI/ObjectUI.py:409 appGUI/ObjectUI.py:758
-#| msgid "Show the Properties."
 msgid "Show the Utilties."
 msgstr "Show the Utilties."
 
@@ -6511,7 +6515,7 @@ msgstr "Resulting geometry will have rounded corners."
 
 #: appGUI/ObjectUI.py:467 appGUI/ObjectUI.py:507 appTools/ToolCutOut.py:2287
 #: appTools/ToolCutOut.py:2302 appTools/ToolIsolation.py:3444
-#: appTools/ToolNCC.py:4312 appTools/ToolPaint.py:3178
+#: appTools/ToolNCC.py:4372 appTools/ToolPaint.py:3178
 msgid "Generate Geometry"
 msgstr "Generate Geometry"
 
@@ -6842,14 +6846,14 @@ msgstr ""
 "cut and negative for 'inside' cut."
 
 #: appGUI/ObjectUI.py:1079 appTools/ToolIsolation.py:3087
-#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3902 appTools/ToolPaint.py:140
+#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3962 appTools/ToolPaint.py:140
 #: appTools/ToolPaint.py:2878
 msgid "Add from DB"
 msgstr "Add from DB"
 
 #: appGUI/ObjectUI.py:1096 appTools/ToolCutOut.py:2071
 #: appTools/ToolIsolation.py:61 appTools/ToolIsolation.py:3122
-#: appTools/ToolNCC.py:3936 appTools/ToolPaint.py:2898
+#: appTools/ToolNCC.py:3996 appTools/ToolPaint.py:2898
 msgid "Search and Add"
 msgstr "Search and Add"
 
@@ -6863,12 +6867,12 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1103 appTools/ToolCutOut.py:2083
 #: appTools/ToolIsolation.py:65 appTools/ToolIsolation.py:3133
-#: appTools/ToolNCC.py:3947 appTools/ToolPaint.py:2909
+#: appTools/ToolNCC.py:4007 appTools/ToolPaint.py:2909
 msgid "Pick from DB"
 msgstr "Pick from DB"
 
 #: appGUI/ObjectUI.py:1106 appTools/ToolCutOut.py:2086
-#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:3950
+#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:4010
 #: appTools/ToolPaint.py:2912
 msgid ""
 "Add a new tool to the Tool Table\n"
@@ -6913,8 +6917,8 @@ msgstr ""
 #: appTools/ToolMilling.py:779 appTools/ToolMilling.py:790
 #: appTools/ToolMilling.py:794 appTools/ToolMilling.py:1711
 #: appTools/ToolNCC.py:271 appTools/ToolNCC.py:276 appTools/ToolNCC.py:306
-#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
-#: appTools/ToolNCC.py:3980 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
+#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
+#: appTools/ToolNCC.py:4040 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
 #: appTools/ToolPaint.py:282 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:316 appTools/ToolPaint.py:655
 #: appTools/ToolPaint.py:2940
@@ -6923,7 +6927,7 @@ msgstr "Parameters for"
 
 #: appGUI/ObjectUI.py:1175 appTools/ToolDrilling.py:2119
 #: appTools/ToolIsolation.py:3169 appTools/ToolMilling.py:1714
-#: appTools/ToolNCC.py:3983 appTools/ToolPaint.py:2943
+#: appTools/ToolNCC.py:4043 appTools/ToolPaint.py:2943
 msgid ""
 "The data used for creating GCode.\n"
 "Each tool store it's own set of such data."
@@ -7075,7 +7079,7 @@ msgstr ""
 msgid "Number of time units for spindle to dwell."
 msgstr "Number of time units for spindle to dwell."
 
-#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2128
+#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2140
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333
@@ -7083,7 +7087,7 @@ msgstr "Number of time units for spindle to dwell."
 msgid "Probe Z depth"
 msgstr "Probe Z depth"
 
-#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2130
+#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2142
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335
@@ -7102,7 +7106,7 @@ msgstr ""
 msgid "Feedrate Probe"
 msgstr "Feedrate Probe"
 
-#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2143
+#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2155
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348
@@ -7112,13 +7116,13 @@ msgstr "The feedrate used while the probe is probing."
 
 #: appGUI/ObjectUI.py:1434 appTools/ToolDrilling.py:2364
 #: appTools/ToolIsolation.py:3265 appTools/ToolMilling.py:2042
-#: appTools/ToolNCC.py:4141 appTools/ToolPaint.py:3049
+#: appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3049
 msgid "Apply parameters to all tools"
 msgstr "Apply parameters to all tools"
 
 #: appGUI/ObjectUI.py:1437 appTools/ToolDrilling.py:2367
 #: appTools/ToolIsolation.py:3268 appTools/ToolMilling.py:2045
-#: appTools/ToolNCC.py:4144 appTools/ToolPaint.py:3052
+#: appTools/ToolNCC.py:4204 appTools/ToolPaint.py:3052
 msgid ""
 "The parameters in the current form will be applied\n"
 "on all the tools from the Tool Table."
@@ -7128,13 +7132,13 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1448 appTools/ToolDrilling.py:2378
 #: appTools/ToolIsolation.py:3279 appTools/ToolMilling.py:2056
-#: appTools/ToolNCC.py:4155 appTools/ToolPaint.py:3063
+#: appTools/ToolNCC.py:4215 appTools/ToolPaint.py:3063
 msgid "Common Parameters"
 msgstr "Common Parameters"
 
 #: appGUI/ObjectUI.py:1450 appTools/ToolDrilling.py:2380
 #: appTools/ToolIsolation.py:3281 appTools/ToolMilling.py:2058
-#: appTools/ToolNCC.py:4157 appTools/ToolPaint.py:3065
+#: appTools/ToolNCC.py:4217 appTools/ToolPaint.py:3065
 msgid "Parameters that are common for all tools."
 msgstr "Parameters that are common for all tools."
 
@@ -7334,7 +7338,7 @@ msgstr "Add an Exclusion Area."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286
 #: appTools/ToolDrilling.py:2591 appTools/ToolIsolation.py:3427
-#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4285
+#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4345
 #: appTools/ToolPaint.py:3165
 msgid "The kind of selection shape used for area selection."
 msgstr "The kind of selection shape used for area selection."
@@ -7427,16 +7431,10 @@ msgid "Launch Paint Tool in Tools Tab."
 msgstr "Launch Paint Tool in Tools Tab."
 
 #: appGUI/ObjectUI.py:1770
-#| msgid "Generating slot milling geometry..."
 msgid "Generate a CNCJob by milling a Geometry."
 msgstr "Generate a CNCJob by milling a Geometry."
 
 #: appGUI/ObjectUI.py:1786 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:35
-#| msgid ""
-#| "Creates tool paths to cover the\n"
-#| "whole area of a polygon (remove\n"
-#| "all copper). You will be asked\n"
-#| "to click on the desired polygon."
 msgid ""
 "Creates tool paths to cover the\n"
 "whole area of a polygon."
@@ -7562,39 +7560,39 @@ msgstr ""
 msgid "Autolevelling"
 msgstr "Autolevelling"
 
-#: appGUI/ObjectUI.py:2052
+#: appGUI/ObjectUI.py:2053
 msgid "Enable the autolevelling feature."
 msgstr "Enable the autolevelling feature."
 
-#: appGUI/ObjectUI.py:2069
+#: appGUI/ObjectUI.py:2081
 msgid "Probe Points Table"
 msgstr "Probe Points Table"
 
-#: appGUI/ObjectUI.py:2070
+#: appGUI/ObjectUI.py:2082
 msgid "Generate GCode that will obtain the height map"
 msgstr "Generate GCode that will obtain the height map"
 
-#: appGUI/ObjectUI.py:2072
+#: appGUI/ObjectUI.py:2084
 msgid "Show"
 msgstr "Show"
 
-#: appGUI/ObjectUI.py:2073
+#: appGUI/ObjectUI.py:2085
 msgid "Toggle the display of the Probe Points table."
 msgstr "Toggle the display of the Probe Points table."
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 msgid "X-Y Coordinates"
 msgstr "X-Y Coordinates"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 msgid "Height"
 msgstr "Height"
 
-#: appGUI/ObjectUI.py:2090
+#: appGUI/ObjectUI.py:2102
 msgid "Plot probing points"
 msgstr "Plot probing points"
 
-#: appGUI/ObjectUI.py:2092
+#: appGUI/ObjectUI.py:2104
 msgid ""
 "Plot the probing points in the table.\n"
 "If a Voronoi method is used then\n"
@@ -7604,11 +7602,11 @@ msgstr ""
 "If a Voronoi method is used then\n"
 "the Voronoi areas are also plotted."
 
-#: appGUI/ObjectUI.py:2107
+#: appGUI/ObjectUI.py:2119
 msgid "Probe GCode Generation"
 msgstr "Probe GCode Generation"
 
-#: appGUI/ObjectUI.py:2109
+#: appGUI/ObjectUI.py:2121
 msgid ""
 "Will create a GCode which will be sent to the controller,\n"
 "either through a file or directly, with the intent to get the height map\n"
@@ -7618,27 +7616,27 @@ msgstr ""
 "either through a file or directly, with the intent to get the height map\n"
 "that is to modify the original GCode to level the cutting height."
 
-#: appGUI/ObjectUI.py:2116
+#: appGUI/ObjectUI.py:2128
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
 msgid "Probe Z travel"
 msgstr "Probe Z travel"
 
-#: appGUI/ObjectUI.py:2118
+#: appGUI/ObjectUI.py:2130
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
 msgid "The safe Z for probe travelling between probe points."
 msgstr "The safe Z for probe travelling between probe points."
 
-#: appGUI/ObjectUI.py:2141
+#: appGUI/ObjectUI.py:2153
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
 msgid "Probe Feedrate"
 msgstr "Probe Feedrate"
 
-#: appGUI/ObjectUI.py:2158
+#: appGUI/ObjectUI.py:2170
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
 msgid "Mode"
 msgstr "Mode"
 
-#: appGUI/ObjectUI.py:2159
+#: appGUI/ObjectUI.py:2171
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
 msgid ""
 "Choose a mode for height map generation.\n"
@@ -7649,19 +7647,19 @@ msgstr ""
 "- Manual: will pick a selection of probe points by clicking on canvas\n"
 "- Grid: will automatically generate a grid of probe points"
 
-#: appGUI/ObjectUI.py:2165
+#: appGUI/ObjectUI.py:2177
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
 #: appTools/ToolCutOut.py:2324 appTools/ToolFiducials.py:801
 msgid "Manual"
 msgstr "Manual"
 
-#: appGUI/ObjectUI.py:2166
+#: appGUI/ObjectUI.py:2178
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
 msgid "Grid"
 msgstr "Grid"
 
-#: appGUI/ObjectUI.py:2173
+#: appGUI/ObjectUI.py:2185
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
 msgid ""
 "Choose a method for approximation of heights from autolevelling data.\n"
@@ -7672,50 +7670,50 @@ msgstr ""
 "- Voronoi: will generate a Voronoi diagram\n"
 "- Bilinear: will use bilinear interpolation. Usable only for grid mode."
 
-#: appGUI/ObjectUI.py:2179
+#: appGUI/ObjectUI.py:2191
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
 msgid "Voronoi"
 msgstr "Voronoi"
 
-#: appGUI/ObjectUI.py:2180
+#: appGUI/ObjectUI.py:2192
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
 msgid "Bilinear"
 msgstr "Bilinear"
 
-#: appGUI/ObjectUI.py:2193
+#: appGUI/ObjectUI.py:2205
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
 #: appTools/ToolPanelize.py:787
 msgid "Columns"
 msgstr "Columns"
 
-#: appGUI/ObjectUI.py:2195
+#: appGUI/ObjectUI.py:2207
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
 msgid "The number of grid columns."
 msgstr "The number of grid columns."
 
-#: appGUI/ObjectUI.py:2204
+#: appGUI/ObjectUI.py:2216
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
 #: appTools/ToolPanelize.py:797
 msgid "Rows"
 msgstr "Rows"
 
-#: appGUI/ObjectUI.py:2206
+#: appGUI/ObjectUI.py:2218
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
 msgid "The number of gird rows."
 msgstr "The number of gird rows."
 
-#: appGUI/ObjectUI.py:2211
+#: appGUI/ObjectUI.py:2223
 msgid "Add Probe Points"
 msgstr "Add Probe Points"
 
-#: appGUI/ObjectUI.py:2219
+#: appGUI/ObjectUI.py:2231
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
 msgid "Controller"
 msgstr "Controller"
 
-#: appGUI/ObjectUI.py:2221
+#: appGUI/ObjectUI.py:2233
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
 msgid ""
 "The kind of controller for which to generate\n"
@@ -7724,147 +7722,147 @@ msgstr ""
 "The kind of controller for which to generate\n"
 "height map gcode."
 
-#: appGUI/ObjectUI.py:2267 appGUI/ObjectUI.py:2282
-#: appObjects/FlatCAMCNCJob.py:1302 appObjects/FlatCAMCNCJob.py:1324
+#: appGUI/ObjectUI.py:2279 appGUI/ObjectUI.py:2294
+#: appObjects/FlatCAMCNCJob.py:1307 appObjects/FlatCAMCNCJob.py:1329
 msgid "Control"
 msgstr "Control"
 
-#: appGUI/ObjectUI.py:2277 appGUI/ObjectUI.py:2284
-#: appObjects/FlatCAMCNCJob.py:1304 appObjects/FlatCAMCNCJob.py:1326
+#: appGUI/ObjectUI.py:2289 appGUI/ObjectUI.py:2296
+#: appObjects/FlatCAMCNCJob.py:1309 appObjects/FlatCAMCNCJob.py:1331
 msgid "Sender"
 msgstr "Sender"
 
-#: appGUI/ObjectUI.py:2298
+#: appGUI/ObjectUI.py:2310
 msgid "COM list"
 msgstr "COM list"
 
-#: appGUI/ObjectUI.py:2300 appGUI/ObjectUI.py:2315
+#: appGUI/ObjectUI.py:2312 appGUI/ObjectUI.py:2327
 msgid "Lists the available serial ports."
 msgstr "Lists the available serial ports."
 
-#: appGUI/ObjectUI.py:2304
+#: appGUI/ObjectUI.py:2316
 msgid "Search"
 msgstr "Search"
 
-#: appGUI/ObjectUI.py:2306
+#: appGUI/ObjectUI.py:2318
 msgid "Search for the available serial ports."
 msgstr "Search for the available serial ports."
 
-#: appGUI/ObjectUI.py:2313
+#: appGUI/ObjectUI.py:2325
 msgid "Baud rates"
 msgstr "Baud rates"
 
-#: appGUI/ObjectUI.py:2332
+#: appGUI/ObjectUI.py:2344
 msgid "New, custom baudrate."
 msgstr "New, custom baudrate."
 
-#: appGUI/ObjectUI.py:2340
+#: appGUI/ObjectUI.py:2352
 msgid "Add the specified custom baudrate to the list."
 msgstr "Add the specified custom baudrate to the list."
 
-#: appGUI/ObjectUI.py:2346
+#: appGUI/ObjectUI.py:2358
 msgid "Delete selected baudrate"
 msgstr "Delete selected baudrate"
 
-#: appGUI/ObjectUI.py:2350
+#: appGUI/ObjectUI.py:2362
 msgid "Reset"
 msgstr "Reset"
 
-#: appGUI/ObjectUI.py:2352
+#: appGUI/ObjectUI.py:2364
 msgid "Software reset of the controller."
 msgstr "Software reset of the controller."
 
-#: appGUI/ObjectUI.py:2358 appObjects/FlatCAMCNCJob.py:1318
+#: appGUI/ObjectUI.py:2370 appObjects/FlatCAMCNCJob.py:1323
 msgid "Disconnected"
 msgstr "Disconnected"
 
-#: appGUI/ObjectUI.py:2360
+#: appGUI/ObjectUI.py:2372
 msgid "Connect to the selected port with the selected baud rate."
 msgstr "Connect to the selected port with the selected baud rate."
 
-#: appGUI/ObjectUI.py:2385
+#: appGUI/ObjectUI.py:2397
 msgid "Jog"
 msgstr "Jog"
 
-#: appGUI/ObjectUI.py:2393
+#: appGUI/ObjectUI.py:2405
 msgid "Zero Axes"
 msgstr "Zero Axes"
 
-#: appGUI/ObjectUI.py:2426
+#: appGUI/ObjectUI.py:2438
 msgid "Pause/Resume"
 msgstr "Pause/Resume"
 
-#: appGUI/ObjectUI.py:2448
+#: appGUI/ObjectUI.py:2460
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
 msgid "Step"
 msgstr "Step"
 
-#: appGUI/ObjectUI.py:2450
+#: appGUI/ObjectUI.py:2462
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
 msgid "Each jog action will move the axes with this value."
 msgstr "Each jog action will move the axes with this value."
 
-#: appGUI/ObjectUI.py:2462
+#: appGUI/ObjectUI.py:2474
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89
 #: appObjects/FlatCAMObj.py:831 appTools/ToolProperties.py:529
 msgid "Feedrate"
 msgstr "Feedrate"
 
-#: appGUI/ObjectUI.py:2464
+#: appGUI/ObjectUI.py:2476
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
 msgid "Feedrate when jogging."
 msgstr "Feedrate when jogging."
 
-#: appGUI/ObjectUI.py:2484
+#: appGUI/ObjectUI.py:2496
 msgid "Send Command"
 msgstr "Send Command"
 
-#: appGUI/ObjectUI.py:2486 appGUI/ObjectUI.py:2496
+#: appGUI/ObjectUI.py:2498 appGUI/ObjectUI.py:2508
 msgid "Send a custom command to GRBL."
 msgstr "Send a custom command to GRBL."
 
-#: appGUI/ObjectUI.py:2491
+#: appGUI/ObjectUI.py:2503
 msgid "Type GRBL command ..."
 msgstr "Type GRBL command ..."
 
-#: appGUI/ObjectUI.py:2494
+#: appGUI/ObjectUI.py:2506
 msgid "Send"
 msgstr "Send"
 
-#: appGUI/ObjectUI.py:2502
+#: appGUI/ObjectUI.py:2514
 msgid "Get Config parameter"
 msgstr "Get Config parameter"
 
-#: appGUI/ObjectUI.py:2504
+#: appGUI/ObjectUI.py:2516
 msgid "A GRBL configuration parameter."
 msgstr "A GRBL configuration parameter."
 
-#: appGUI/ObjectUI.py:2509
+#: appGUI/ObjectUI.py:2521
 msgid "Type GRBL parameter ..."
 msgstr "Type GRBL parameter ..."
 
-#: appGUI/ObjectUI.py:2512
+#: appGUI/ObjectUI.py:2524
 msgid "Get"
 msgstr "Get"
 
-#: appGUI/ObjectUI.py:2514
+#: appGUI/ObjectUI.py:2526
 msgid "Get the value of a specified GRBL parameter."
 msgstr "Get the value of a specified GRBL parameter."
 
-#: appGUI/ObjectUI.py:2522
+#: appGUI/ObjectUI.py:2534
 msgid "Get Report"
 msgstr "Get Report"
 
-#: appGUI/ObjectUI.py:2524
+#: appGUI/ObjectUI.py:2536
 msgid "Print in shell the GRBL report."
 msgstr "Print in shell the GRBL report."
 
-#: appGUI/ObjectUI.py:2530
+#: appGUI/ObjectUI.py:2542
 msgid "Apply AutoLevelling"
 msgstr "Apply AutoLevelling"
 
-#: appGUI/ObjectUI.py:2532
+#: appGUI/ObjectUI.py:2544
 msgid ""
 "Will send the probing GCode to the GRBL controller,\n"
 "wait for the Z probing data and then apply this data\n"
@@ -7874,28 +7872,28 @@ msgstr ""
 "wait for the Z probing data and then apply this data\n"
 "over the original GCode therefore doing autolevelling."
 
-#: appGUI/ObjectUI.py:2541
+#: appGUI/ObjectUI.py:2553
 msgid "Will save the GRBL height map."
 msgstr "Will save the GRBL height map."
 
-#: appGUI/ObjectUI.py:2551
+#: appGUI/ObjectUI.py:2563
 msgid "Save Probing GCode"
 msgstr "Save Probing GCode"
 
-#: appGUI/ObjectUI.py:2553
+#: appGUI/ObjectUI.py:2565
 msgid "Will save the probing GCode."
 msgstr "Will save the probing GCode."
 
-#: appGUI/ObjectUI.py:2562
+#: appGUI/ObjectUI.py:2574
 msgid "View/Edit the probing GCode."
 msgstr "View/Edit the probing GCode."
 
-#: appGUI/ObjectUI.py:2569 appObjects/FlatCAMCNCJob.py:1735
-#: appObjects/FlatCAMCNCJob.py:1739
+#: appGUI/ObjectUI.py:2581 appObjects/FlatCAMCNCJob.py:1740
+#: appObjects/FlatCAMCNCJob.py:1744
 msgid "Import Height Map"
 msgstr "Import Height Map"
 
-#: appGUI/ObjectUI.py:2571
+#: appGUI/ObjectUI.py:2583
 msgid ""
 "Import the file that has the Z heights\n"
 "obtained through probing and then apply this data\n"
@@ -7907,11 +7905,11 @@ msgstr ""
 "over the original GCode therefore\n"
 "doing autolevelling."
 
-#: appGUI/ObjectUI.py:2589
+#: appGUI/ObjectUI.py:2601
 msgid "Export CNC Code"
 msgstr "Export CNC Code"
 
-#: appGUI/ObjectUI.py:2591
+#: appGUI/ObjectUI.py:2603
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
 msgid ""
@@ -7921,11 +7919,11 @@ msgstr ""
 "Export and save G-Code to\n"
 "make this object to a file."
 
-#: appGUI/ObjectUI.py:2600
+#: appGUI/ObjectUI.py:2612
 msgid "Save CNC Code"
 msgstr "Save CNC Code"
 
-#: appGUI/ObjectUI.py:2603
+#: appGUI/ObjectUI.py:2615
 msgid ""
 "Opens dialog to save G-Code\n"
 "file."
@@ -7933,80 +7931,80 @@ msgstr ""
 "Opens dialog to save G-Code\n"
 "file."
 
-#: appGUI/ObjectUI.py:2610
+#: appGUI/ObjectUI.py:2622
 msgid "Review CNC Code."
 msgstr "Review CNC Code."
 
-#: appGUI/ObjectUI.py:2671
+#: appGUI/ObjectUI.py:2683
 msgid "Script Object"
 msgstr "Script Object"
 
-#: appGUI/ObjectUI.py:2691 appGUI/ObjectUI.py:2765
+#: appGUI/ObjectUI.py:2703 appGUI/ObjectUI.py:2777
 msgid "Auto Completer"
 msgstr "Auto Completer"
 
-#: appGUI/ObjectUI.py:2693
+#: appGUI/ObjectUI.py:2705
 msgid "This selects if the auto completer is enabled in the Script Editor."
 msgstr "This selects if the auto completer is enabled in the Script Editor."
 
-#: appGUI/ObjectUI.py:2738
+#: appGUI/ObjectUI.py:2750
 msgid "Document Object"
 msgstr "Document Object"
 
-#: appGUI/ObjectUI.py:2767
+#: appGUI/ObjectUI.py:2779
 msgid "This selects if the auto completer is enabled in the Document Editor."
 msgstr "This selects if the auto completer is enabled in the Document Editor."
 
-#: appGUI/ObjectUI.py:2785
+#: appGUI/ObjectUI.py:2797
 msgid "Font Type"
 msgstr "Font Type"
 
-#: appGUI/ObjectUI.py:2802
+#: appGUI/ObjectUI.py:2814
 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
 msgid "Font Size"
 msgstr "Font Size"
 
-#: appGUI/ObjectUI.py:2838
+#: appGUI/ObjectUI.py:2850
 msgid "Alignment"
 msgstr "Alignment"
 
-#: appGUI/ObjectUI.py:2843
+#: appGUI/ObjectUI.py:2855
 msgid "Align Left"
 msgstr "Align Left"
 
-#: appGUI/ObjectUI.py:2848 app_Main.py:4993
+#: appGUI/ObjectUI.py:2860 app_Main.py:4993
 msgid "Center"
 msgstr "Center"
 
-#: appGUI/ObjectUI.py:2853
+#: appGUI/ObjectUI.py:2865
 msgid "Align Right"
 msgstr "Align Right"
 
-#: appGUI/ObjectUI.py:2858
+#: appGUI/ObjectUI.py:2870
 msgid "Justify"
 msgstr "Justify"
 
-#: appGUI/ObjectUI.py:2865
+#: appGUI/ObjectUI.py:2877
 msgid "Font Color"
 msgstr "Font Color"
 
-#: appGUI/ObjectUI.py:2867
+#: appGUI/ObjectUI.py:2879
 msgid "Set the font color for the selected text"
 msgstr "Set the font color for the selected text"
 
-#: appGUI/ObjectUI.py:2881
+#: appGUI/ObjectUI.py:2893
 msgid "Selection Color"
 msgstr "Selection Color"
 
-#: appGUI/ObjectUI.py:2883
+#: appGUI/ObjectUI.py:2895
 msgid "Set the selection color when doing text selection."
 msgstr "Set the selection color when doing text selection."
 
-#: appGUI/ObjectUI.py:2897
+#: appGUI/ObjectUI.py:2909
 msgid "Tab Size"
 msgstr "Tab Size"
 
-#: appGUI/ObjectUI.py:2899
+#: appGUI/ObjectUI.py:2911
 msgid "Set the tab size. In pixels. Default value is 80 pixels."
 msgstr "Set the tab size. In pixels. Default value is 80 pixels."
 
@@ -10100,10 +10098,10 @@ msgstr "\"Follow\""
 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64
 #: appObjects/FlatCAMGerber.py:370 appTools/ToolCopperThieving.py:581
 #: appTools/ToolCopperThieving.py:770 appTools/ToolCopperThieving.py:782
-#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1791
-#: appTools/ToolNCC.py:1818 appTools/ToolNCC.py:1926 appTools/ToolNCC.py:1939
-#: appTools/ToolNCC.py:2785 appTools/ToolNCC.py:2890 appTools/ToolNCC.py:2905
-#: appTools/ToolNCC.py:3171 appTools/ToolNCC.py:3272 appTools/ToolNCC.py:3287
+#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1793
+#: appTools/ToolNCC.py:1820 appTools/ToolNCC.py:1928 appTools/ToolNCC.py:1941
+#: appTools/ToolNCC.py:2845 appTools/ToolNCC.py:2950 appTools/ToolNCC.py:2965
+#: appTools/ToolNCC.py:3231 appTools/ToolNCC.py:3332 appTools/ToolNCC.py:3347
 #: camlib.py:1113
 msgid "Buffering"
 msgstr "Buffering"
@@ -10424,9 +10422,9 @@ msgstr ""
 
 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
-#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1349
-#: appTools/ToolNCC.py:1665 appTools/ToolNCC.py:1729 appTools/ToolNCC.py:2649
-#: appTools/ToolNCC.py:2658 appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4376
+#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1351
+#: appTools/ToolNCC.py:1667 appTools/ToolNCC.py:1731 appTools/ToolNCC.py:2709
+#: appTools/ToolNCC.py:2718 appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4436
 #: defaults.py:475 tclCommands/TclCommandCopperClear.py:190
 msgid "Itself"
 msgstr "Itself"
@@ -10437,8 +10435,8 @@ msgstr "Itself"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1219 appTools/ToolIsolation.py:819
 #: appTools/ToolIsolation.py:1435 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1363 appTools/ToolNCC.py:1681 appTools/ToolNCC.py:1736
-#: appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4386 appTools/ToolPaint.py:1061
+#: appTools/ToolNCC.py:1365 appTools/ToolNCC.py:1683 appTools/ToolNCC.py:1738
+#: appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4446 appTools/ToolPaint.py:1061
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3249
 msgid "Area Selection"
 msgstr "Area Selection"
@@ -10449,9 +10447,9 @@ msgstr "Area Selection"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1220 appTools/ToolDblSided.py:757
 #: appTools/ToolIsolation.py:1475 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1382 appTools/ToolNCC.py:1687 appTools/ToolNCC.py:1744
-#: appTools/ToolNCC.py:2122 appTools/ToolNCC.py:2356 appTools/ToolNCC.py:2694
-#: appTools/ToolNCC.py:4240 appTools/ToolPaint.py:1080
+#: appTools/ToolNCC.py:1384 appTools/ToolNCC.py:1689 appTools/ToolNCC.py:1746
+#: appTools/ToolNCC.py:2124 appTools/ToolNCC.py:2358 appTools/ToolNCC.py:2754
+#: appTools/ToolNCC.py:4300 appTools/ToolPaint.py:1080
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3232
 #: tclCommands/TclCommandCopperClear.py:192 tclCommands/TclCommandPaint.py:166
 msgid "Reference Object"
@@ -11767,7 +11765,7 @@ msgstr "Create CNCJob with toolpaths for drilling or milling holes."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:140
 #: appTools/ToolDrilling.py:2082 appTools/ToolIsolation.py:3058
-#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3867
+#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3927
 #: appTools/ToolPaint.py:2843
 msgid "Tool order"
 msgstr "Tool order"
@@ -11778,8 +11776,8 @@ msgstr "Tool order"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141
 #: appTools/ToolDrilling.py:2083 appTools/ToolIsolation.py:3059
-#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3868
-#: appTools/ToolNCC.py:3878 appTools/ToolPaint.py:2844
+#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3928
+#: appTools/ToolNCC.py:3938 appTools/ToolPaint.py:2844
 #: appTools/ToolPaint.py:2854
 msgid ""
 "This set the way that the tools in the tools table are used.\n"
@@ -11803,7 +11801,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:149
 #: appTools/ToolDrilling.py:2091 appTools/ToolIsolation.py:3067
-#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3876
+#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3936
 #: appTools/ToolPaint.py:2852
 msgid "Forward"
 msgstr "Forward"
@@ -11813,7 +11811,7 @@ msgstr "Forward"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150
 #: appTools/ToolDrilling.py:2092 appTools/ToolIsolation.py:3068
-#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3877
+#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3937
 #: appTools/ToolPaint.py:2853
 msgid "Reverse"
 msgstr "Reverse"
@@ -12168,7 +12166,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:242
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243
-#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4162
+#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4222
 #: appTools/ToolPaint.py:3069
 msgid "Rest"
 msgstr "Rest"
@@ -12220,13 +12218,13 @@ msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:350
-#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4298
+#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4358
 msgid "Check validity"
 msgstr "Check validity"
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:352
-#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4300
+#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4360
 msgid ""
 "If checked then the tools diameters are verified\n"
 "if they will provide a complete isolation."
@@ -12349,7 +12347,7 @@ msgstr ""
 "from the copper features.\n"
 "The value can be between 0.0 and 9999.9 FlatCAM units."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4166
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4226
 msgid ""
 "If checked, use 'rest machining'.\n"
 "Basically it will clear copper outside PCB features,\n"
@@ -12367,7 +12365,7 @@ msgstr ""
 "no more copper to clear or there are no more tools.\n"
 "If not checked, use the standard algorithm."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4246
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4306
 msgid ""
 "Selection of area to be processed.\n"
 "- 'Itself' - the processing extent is based on the object that is "
@@ -12508,7 +12506,7 @@ msgstr "Number of rows of the desired panel"
 #: appTools/ToolFilm.py:951 appTools/ToolImage.py:117 appTools/ToolImage.py:138
 #: appTools/ToolImage.py:191 appTools/ToolIsolation.py:802
 #: appTools/ToolIsolation.py:3339 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:3789 appTools/ToolNCC.py:4263
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:3849 appTools/ToolNCC.py:4323
 #: appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
 #: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167
 #: appTools/ToolPanelize.py:715 appTools/ToolPanelize.py:809
@@ -13034,17 +13032,17 @@ msgstr ""
 msgid "created/selected"
 msgstr "created/selected"
 
-#: appObjects/FlatCAMCNCJob.py:637 appObjects/FlatCAMDocument.py:71
+#: appObjects/FlatCAMCNCJob.py:642 appObjects/FlatCAMDocument.py:71
 #: appObjects/FlatCAMScript.py:82
 msgid "<span style=\"color:green;\"><b>Basic</b></span>"
 msgstr "<span style=\"color:green;\"><b>Basic</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:644 appObjects/FlatCAMDocument.py:75
+#: appObjects/FlatCAMCNCJob.py:649 appObjects/FlatCAMDocument.py:75
 #: appObjects/FlatCAMScript.py:86
 msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
 msgstr "<span style=\"color:red;\"><b>Advanced</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:780 appObjects/FlatCAMCNCJob.py:1058
+#: appObjects/FlatCAMCNCJob.py:785 appObjects/FlatCAMCNCJob.py:1063
 msgid ""
 "Voronoi function can not be loaded.\n"
 "Shapely >= 1.8 is required"
@@ -13052,15 +13050,15 @@ msgstr ""
 "Voronoi function can not be loaded.\n"
 "Shapely >= 1.8 is required"
 
-#: appObjects/FlatCAMCNCJob.py:808
+#: appObjects/FlatCAMCNCJob.py:813
 msgid "Click on canvas to add a Probe Point..."
 msgstr "Click on canvas to add a Probe Point..."
 
-#: appObjects/FlatCAMCNCJob.py:1004
+#: appObjects/FlatCAMCNCJob.py:1009
 msgid "Point is not within the object area. Choose another point."
 msgstr "Point is not within the object area. Choose another point."
 
-#: appObjects/FlatCAMCNCJob.py:1024
+#: appObjects/FlatCAMCNCJob.py:1029
 msgid ""
 "Added a Probe Point... Click again to add another or right click to "
 "finish ..."
@@ -13068,117 +13066,117 @@ msgstr ""
 "Added a Probe Point... Click again to add another or right click to "
 "finish ..."
 
-#: appObjects/FlatCAMCNCJob.py:1046
+#: appObjects/FlatCAMCNCJob.py:1051
 msgid "Finished adding Probe Points..."
 msgstr "Finished adding Probe Points..."
 
-#: appObjects/FlatCAMCNCJob.py:1260
+#: appObjects/FlatCAMCNCJob.py:1265
 msgid "COM list updated ..."
 msgstr "COM list updated ..."
 
-#: appObjects/FlatCAMCNCJob.py:1296
+#: appObjects/FlatCAMCNCJob.py:1301
 msgid "Connected"
 msgstr "Connected"
 
-#: appObjects/FlatCAMCNCJob.py:1307
+#: appObjects/FlatCAMCNCJob.py:1312
 msgid "Port connected"
 msgstr "Port connected"
 
-#: appObjects/FlatCAMCNCJob.py:1311
+#: appObjects/FlatCAMCNCJob.py:1316
 msgid "Could not connect to GRBL on port"
 msgstr "Could not connect to GRBL on port"
 
-#: appObjects/FlatCAMCNCJob.py:1328
+#: appObjects/FlatCAMCNCJob.py:1333
 msgid "Port is connected. Disconnecting"
 msgstr "Port is connected. Disconnecting"
 
-#: appObjects/FlatCAMCNCJob.py:1330
+#: appObjects/FlatCAMCNCJob.py:1335
 msgid "Could not connect to port"
 msgstr "Could not connect to port"
 
-#: appObjects/FlatCAMCNCJob.py:1360 appObjects/FlatCAMCNCJob.py:1790
+#: appObjects/FlatCAMCNCJob.py:1365 appObjects/FlatCAMCNCJob.py:1795
 msgid "Sending GCode..."
 msgstr "Sending GCode..."
 
-#: appObjects/FlatCAMCNCJob.py:1489
+#: appObjects/FlatCAMCNCJob.py:1494
 msgid "GRBL is doing a home cycle."
 msgstr "GRBL is doing a home cycle."
 
-#: appObjects/FlatCAMCNCJob.py:1495
+#: appObjects/FlatCAMCNCJob.py:1500
 msgid "GRBL software reset was sent."
 msgstr "GRBL software reset was sent."
 
-#: appObjects/FlatCAMCNCJob.py:1503
+#: appObjects/FlatCAMCNCJob.py:1508
 msgid "GRBL resumed."
 msgstr "GRBL resumed."
 
-#: appObjects/FlatCAMCNCJob.py:1507
+#: appObjects/FlatCAMCNCJob.py:1512
 msgid "GRBL paused."
 msgstr "GRBL paused."
 
-#: appObjects/FlatCAMCNCJob.py:1649 appObjects/FlatCAMCNCJob.py:1839
-#: appObjects/FlatCAMCNCJob.py:1924 appTools/ToolSolderPaste.py:1066
+#: appObjects/FlatCAMCNCJob.py:1654 appObjects/FlatCAMCNCJob.py:1844
+#: appObjects/FlatCAMCNCJob.py:1929 appTools/ToolSolderPaste.py:1066
 msgid "Export cancelled ..."
 msgstr "Export cancelled ..."
 
-#: appObjects/FlatCAMCNCJob.py:1673 appObjects/FlatCAMCNCJob.py:1960
+#: appObjects/FlatCAMCNCJob.py:1678 appObjects/FlatCAMCNCJob.py:1965
 #: appObjects/FlatCAMScript.py:134 app_Main.py:7824
 msgid "Loading..."
 msgstr "Loading..."
 
-#: appObjects/FlatCAMCNCJob.py:1677
+#: appObjects/FlatCAMCNCJob.py:1682
 msgid "There is nothing to view"
 msgstr "There is nothing to view"
 
-#: appObjects/FlatCAMCNCJob.py:1683
+#: appObjects/FlatCAMCNCJob.py:1688
 msgid "Code Viewer"
 msgstr "Code Viewer"
 
-#: appObjects/FlatCAMCNCJob.py:1721
+#: appObjects/FlatCAMCNCJob.py:1726
 msgid "Loaded Machine Code into Code Viewer"
 msgstr "Loaded Machine Code into Code Viewer"
 
-#: appObjects/FlatCAMCNCJob.py:1766
+#: appObjects/FlatCAMCNCJob.py:1771
 msgid "Failed to open height map file"
 msgstr "Failed to open height map file"
 
-#: appObjects/FlatCAMCNCJob.py:1816
+#: appObjects/FlatCAMCNCJob.py:1821
 msgid "Finished probing. Doing the autolevelling."
 msgstr "Finished probing. Doing the autolevelling."
 
-#: appObjects/FlatCAMCNCJob.py:1821
+#: appObjects/FlatCAMCNCJob.py:1826
 msgid "Sending probing GCode to the GRBL controller."
 msgstr "Sending probing GCode to the GRBL controller."
 
-#: appObjects/FlatCAMCNCJob.py:1862
+#: appObjects/FlatCAMCNCJob.py:1867
 msgid "Empty GRBL heightmap."
 msgstr "Empty GRBL heightmap."
 
-#: appObjects/FlatCAMCNCJob.py:1866
+#: appObjects/FlatCAMCNCJob.py:1871
 msgid "Finished autolevelling."
 msgstr "Finished autolevelling."
 
-#: appObjects/FlatCAMCNCJob.py:1880
+#: appObjects/FlatCAMCNCJob.py:1885
 msgid "Plotting..."
 msgstr "Plotting..."
 
-#: appObjects/FlatCAMCNCJob.py:1950
+#: appObjects/FlatCAMCNCJob.py:1955
 msgid "File saved to"
 msgstr "File saved to"
 
-#: appObjects/FlatCAMCNCJob.py:1974
+#: appObjects/FlatCAMCNCJob.py:1979
 msgid "Code Review"
 msgstr "Code Review"
 
-#: appObjects/FlatCAMCNCJob.py:2157
+#: appObjects/FlatCAMCNCJob.py:2162
 msgid "This CNCJob object can't be processed because it is a"
 msgstr "This CNCJob object can't be processed because it is a"
 
-#: appObjects/FlatCAMCNCJob.py:2159
+#: appObjects/FlatCAMCNCJob.py:2164
 msgid "CNCJob object"
 msgstr "CNCJob object"
 
-#: appObjects/FlatCAMCNCJob.py:2269
+#: appObjects/FlatCAMCNCJob.py:2274
 msgid ""
 "G-code does not have a G94 code.\n"
 "Append Code snippet will not be used.."
@@ -13240,7 +13238,7 @@ msgstr "Finish"
 #: appTools/ToolIsolation.py:531 appTools/ToolIsolation.py:644
 #: appTools/ToolIsolation.py:710 appTools/ToolMilling.py:628
 #: appTools/ToolMilling.py:749 appTools/ToolMilling.py:794
-#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
+#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
 #: appTools/ToolPaint.py:252 appTools/ToolPaint.py:316
 #: appTools/ToolPaint.py:655
 msgid "Multiple Tools"
@@ -13421,7 +13419,7 @@ msgstr "Operation could not be done."
 
 #: appObjects/FlatCAMGerber.py:558 appObjects/FlatCAMGerber.py:632
 #: appTools/ToolIsolation.py:1583 appTools/ToolIsolation.py:1951
-#: appTools/ToolNCC.py:1854 appTools/ToolNCC.py:2819 appTools/ToolNCC.py:3198
+#: appTools/ToolNCC.py:1856 appTools/ToolNCC.py:2879 appTools/ToolNCC.py:3258
 msgid "Isolation geometry could not be generated."
 msgstr "Isolation geometry could not be generated."
 
@@ -13836,7 +13834,7 @@ msgstr ""
 #: appTools/ToolEtchCompensation.py:458 appTools/ToolExtractDrills.py:702
 #: appTools/ToolFiducials.py:932 appTools/ToolFilm.py:1383
 #: appTools/ToolInvertGerber.py:286 appTools/ToolIsolation.py:3477
-#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4328
+#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4388
 #: appTools/ToolOptimal.py:593 appTools/ToolPaint.py:3194
 #: appTools/ToolPanelize.py:889 appTools/ToolPunchGerber.py:993
 #: appTools/ToolQRCode.py:904 appTools/ToolRulesCheck.py:1618
@@ -13852,7 +13850,7 @@ msgstr "Reset Tool"
 #: appTools/ToolEtchCompensation.py:461 appTools/ToolExtractDrills.py:705
 #: appTools/ToolFiducials.py:935 appTools/ToolFilm.py:1386
 #: appTools/ToolInvertGerber.py:289 appTools/ToolIsolation.py:3480
-#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4331
+#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4391
 #: appTools/ToolOptimal.py:596 appTools/ToolPaint.py:3197
 #: appTools/ToolPanelize.py:892 appTools/ToolPunchGerber.py:996
 #: appTools/ToolQRCode.py:907 appTools/ToolRulesCheck.py:1621
@@ -14292,8 +14290,8 @@ msgstr "Copper Thieving Tool done."
 #: appTools/ToolIsolation.py:908 appTools/ToolIsolation.py:1345
 #: appTools/ToolIsolation.py:1372 appTools/ToolMilling.py:424
 #: appTools/ToolMilling.py:639 appTools/ToolMilling.py:1322
-#: appTools/ToolNCC.py:844 appTools/ToolNCC.py:1306 appTools/ToolNCC.py:1355
-#: appTools/ToolNCC.py:1388 appTools/ToolPaint.py:1086
+#: appTools/ToolNCC.py:846 appTools/ToolNCC.py:1308 appTools/ToolNCC.py:1357
+#: appTools/ToolNCC.py:1390 appTools/ToolPaint.py:1086
 #: appTools/ToolPanelize.py:191 appTools/ToolPanelize.py:205
 #: appTools/ToolSub.py:157 appTools/ToolSub.py:170 appTools/ToolSub.py:359
 #: appTools/ToolSub.py:372 tclCommands/TclCommandCopperClear.py:97
@@ -14324,7 +14322,7 @@ msgstr "Copper Thieving Tool. Preparing areas to fill with copper."
 
 #: appTools/ToolCopperThieving.py:599 appTools/ToolFilm.py:631
 #: appTools/ToolFilm.py:879 appTools/ToolIsolation.py:916
-#: appTools/ToolNCC.py:851 appTools/ToolOptimal.py:145
+#: appTools/ToolNCC.py:853 appTools/ToolOptimal.py:145
 #: appTools/ToolPanelize.py:612 appTools/ToolRulesCheck.py:626
 msgid "Working..."
 msgstr "Working..."
@@ -14333,13 +14331,13 @@ msgstr "Working..."
 msgid "Geometry not supported for bounding box"
 msgstr "Geometry not supported for bounding box"
 
-#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1679
-#: appTools/ToolNCC.py:1734 appTools/ToolNCC.py:2674 appTools/ToolPaint.py:2457
+#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1681
+#: appTools/ToolNCC.py:1736 appTools/ToolNCC.py:2734 appTools/ToolPaint.py:2457
 msgid "No object available."
 msgstr "No object available."
 
-#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1704
-#: appTools/ToolNCC.py:1757 appTools/ToolNCC.py:2716
+#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1706
+#: appTools/ToolNCC.py:1759 appTools/ToolNCC.py:2776
 msgid "The reference object type is not supported."
 msgstr "The reference object type is not supported."
 
@@ -14396,7 +14394,7 @@ msgstr ""
 "another object."
 
 #: appTools/ToolCopperThieving.py:1231 appTools/ToolIsolation.py:3385
-#: appTools/ToolNCC.py:4257 appTools/ToolPaint.py:3137
+#: appTools/ToolNCC.py:4317 appTools/ToolPaint.py:3137
 msgid "Ref. Type"
 msgstr "Ref. Type"
 
@@ -14409,12 +14407,12 @@ msgstr ""
 "It can be Gerber, Excellon or Geometry."
 
 #: appTools/ToolCopperThieving.py:1242 appTools/ToolIsolation.py:3396
-#: appTools/ToolNCC.py:4267 appTools/ToolPaint.py:3147
+#: appTools/ToolNCC.py:4327 appTools/ToolPaint.py:3147
 msgid "Ref. Object"
 msgstr "Ref. Object"
 
 #: appTools/ToolCopperThieving.py:1244 appTools/ToolIsolation.py:3398
-#: appTools/ToolNCC.py:4269 appTools/ToolPaint.py:3149
+#: appTools/ToolNCC.py:4329 appTools/ToolPaint.py:3149
 msgid "The FlatCAM object to be used as non copper clearing reference."
 msgstr "The FlatCAM object to be used as non copper clearing reference."
 
@@ -14546,7 +14544,7 @@ msgstr "Will add corner markers to the selected Gerber file."
 
 #: appTools/ToolCutOut.py:281 appTools/ToolIsolation.py:791
 #: appTools/ToolIsolation.py:1049 appTools/ToolIsolation.py:1185
-#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:990 appTools/ToolNCC.py:1128
+#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:992 appTools/ToolNCC.py:1130
 #: appTools/ToolPaint.py:395 appTools/ToolPaint.py:686
 #: appTools/ToolPaint.py:823 appTools/ToolSolderPaste.py:131
 #: appTools/ToolSolderPaste.py:464 app_Main.py:4490
@@ -14554,12 +14552,12 @@ msgid "Please enter a tool diameter with non-zero value, in Float format."
 msgstr "Please enter a tool diameter with non-zero value, in Float format."
 
 #: appTools/ToolCutOut.py:357 appTools/ToolIsolation.py:1130
-#: appTools/ToolNCC.py:1073 appTools/ToolPaint.py:767
+#: appTools/ToolNCC.py:1075 appTools/ToolPaint.py:767
 msgid "Tool not in Tools Database. Adding a default tool."
 msgstr "Tool not in Tools Database. Adding a default tool."
 
 #: appTools/ToolCutOut.py:364 appTools/ToolDrilling.py:955
-#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1080
+#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1082
 #: appTools/ToolPaint.py:775
 msgid ""
 "Cancelled.\n"
@@ -14577,7 +14575,7 @@ msgid "Default tool added."
 msgstr "Default tool added."
 
 #: appTools/ToolCutOut.py:466 appTools/ToolIsolation.py:2577
-#: appTools/ToolNCC.py:3649 appTools/ToolPaint.py:2620
+#: appTools/ToolNCC.py:3709 appTools/ToolPaint.py:2620
 msgid "Selected tool can't be used here. Pick another."
 msgstr "Selected tool can't be used here. Pick another."
 
@@ -14624,7 +14622,7 @@ msgstr "Any form CutOut operation finished."
 #: appTools/ToolEtchCompensation.py:158 appTools/ToolInvertGerber.py:105
 #: appTools/ToolIsolation.py:912 appTools/ToolIsolation.py:1349
 #: appTools/ToolIsolation.py:1376 appTools/ToolMilling.py:1326
-#: appTools/ToolNCC.py:848 appTools/ToolNCC.py:1310 appTools/ToolPaint.py:1003
+#: appTools/ToolNCC.py:850 appTools/ToolNCC.py:1312 appTools/ToolPaint.py:1003
 #: appTools/ToolPanelize.py:196 tclCommands/TclCommandBbox.py:71
 #: tclCommands/TclCommandNregions.py:71
 msgid "Object not found"
@@ -14724,7 +14722,7 @@ msgstr ""
 "of objects that will populate the 'Object' combobox."
 
 #: appTools/ToolCutOut.py:2074 appTools/ToolIsolation.py:3125
-#: appTools/ToolNCC.py:3939 appTools/ToolPaint.py:2901
+#: appTools/ToolNCC.py:3999 appTools/ToolPaint.py:2901
 msgid ""
 "Add a new tool to the Tool Table\n"
 "with the diameter specified above.\n"
@@ -15952,7 +15950,7 @@ msgstr "New Tool"
 msgid "Adding Tool cancelled"
 msgstr "Adding Tool cancelled"
 
-#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:879
+#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:881
 #: appTools/ToolOptimal.py:179
 msgid ""
 "The Gerber object has one Polygon as geometry.\n"
@@ -15961,13 +15959,13 @@ msgstr ""
 "The Gerber object has one Polygon as geometry.\n"
 "There are no distances between geometry elements to be found."
 
-#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:924
+#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:926
 msgid "Optimal tool diameter found"
 msgstr "Optimal tool diameter found"
 
 #: appTools/ToolIsolation.py:1000 appTools/ToolIsolation.py:1508
 #: appTools/ToolIsolation.py:1710 appTools/ToolIsolation.py:1897
-#: appTools/ToolNCC.py:935 appTools/ToolNCC.py:1343 appTools/ToolPaint.py:1031
+#: appTools/ToolNCC.py:937 appTools/ToolNCC.py:1345 appTools/ToolPaint.py:1031
 #: appTools/ToolPaint.py:1744
 msgid "There are no tools selected in the Tool Table."
 msgstr "There are no tools selected in the Tool Table."
@@ -15980,39 +15978,39 @@ msgstr ""
 
 #: appTools/ToolIsolation.py:1057 appTools/ToolIsolation.py:1144
 #: appTools/ToolIsolation.py:1206 appTools/ToolIsolation.py:2626
-#: appTools/ToolNCC.py:999 appTools/ToolNCC.py:1087 appTools/ToolNCC.py:1149
-#: appTools/ToolNCC.py:3698 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
+#: appTools/ToolNCC.py:1001 appTools/ToolNCC.py:1089 appTools/ToolNCC.py:1151
+#: appTools/ToolNCC.py:3758 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
 #: appTools/ToolPaint.py:844 appTools/ToolPaint.py:2676
 #: appTools/ToolSolderPaste.py:488
 msgid "Cancelled. Tool already in Tool Table."
 msgstr "Cancelled. Tool already in Tool Table."
 
-#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1115
+#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1117
 #: appTools/ToolPaint.py:810
 msgid "New tool added to Tool Table from Tools Database."
 msgstr "New tool added to Tool Table from Tools Database."
 
-#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1179
+#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1181
 #: appTools/ToolPaint.py:873
 msgid "Default tool added to Tool Table."
 msgstr "Default tool added to Tool Table."
 
-#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1205
+#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1207
 #: appTools/ToolPaint.py:898
 msgid "Tool from Tool Table was edited."
 msgstr "Tool from Tool Table was edited."
 
-#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1218
+#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1220
 #: appTools/ToolPaint.py:911 appTools/ToolSolderPaste.py:548
 msgid "Cancelled. New diameter value is already in the Tool Table."
 msgstr "Cancelled. New diameter value is already in the Tool Table."
 
-#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1269
+#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1271
 #: appTools/ToolPaint.py:961
 msgid "Delete failed. Select a tool to delete."
 msgstr "Delete failed. Select a tool to delete."
 
-#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1275
+#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1277
 #: appTools/ToolPaint.py:967
 msgid "Tool(s) deleted from Tool Table."
 msgstr "Tool(s) deleted from Tool Table."
@@ -16103,12 +16101,12 @@ msgstr "No polygon in selection."
 msgid "Click the end point of the paint area."
 msgstr "Click the end point of the paint area."
 
-#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3662
+#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3722
 #: appTools/ToolPaint.py:2633 app_Main.py:5773 app_Main.py:5783
 msgid "Tool from DB added in Tool Table."
 msgstr "Tool from DB added in Tool Table."
 
-#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3715
+#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3775
 #: appTools/ToolPaint.py:2693
 msgid "New tool added to Tool Table."
 msgstr "New tool added to Tool Table."
@@ -16117,7 +16115,7 @@ msgstr "New tool added to Tool Table."
 msgid "Gerber object for isolation routing."
 msgstr "Gerber object for isolation routing."
 
-#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3815
+#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3875
 msgid ""
 "Tools pool from which the algorithm\n"
 "will pick the ones used for copper clearing."
@@ -16141,7 +16139,7 @@ msgstr ""
 "in the resulting geometry. This is because with some tools\n"
 "this function will not be able to create routing geometry."
 
-#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3839
+#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3899
 msgid ""
 "Tool Diameter. It's value (in current FlatCAM units)\n"
 "is the cut width into the material."
@@ -16149,7 +16147,7 @@ msgstr ""
 "Tool Diameter. It's value (in current FlatCAM units)\n"
 "is the cut width into the material."
 
-#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3843
+#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3903
 msgid ""
 "The Tool Type (TT) can be:\n"
 "- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
@@ -16185,11 +16183,11 @@ msgstr ""
 "Type\n"
 "in the resulting geometry as Isolation."
 
-#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3923
+#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3983
 msgid "Optimal"
 msgstr "Optimal"
 
-#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3927
+#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3987
 msgid ""
 "Find a tool diameter that is guaranteed\n"
 "to do a complete isolation."
@@ -16197,7 +16195,7 @@ msgstr ""
 "Find a tool diameter that is guaranteed\n"
 "to do a complete isolation."
 
-#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:3967
+#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:4027
 #: appTools/ToolPaint.py:2929 appTools/ToolSolderPaste.py:1211
 msgid ""
 "Delete a selection of tools in the Tool Table\n"
@@ -16222,7 +16220,7 @@ msgstr ""
 msgid "Object whose area will be removed from isolation geometry."
 msgstr "Object whose area will be removed from isolation geometry."
 
-#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4259
+#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4319
 msgid ""
 "The type of FlatCAM object to be used as non copper clearing reference.\n"
 "It can be Gerber, Excellon or Geometry."
@@ -16304,13 +16302,11 @@ msgstr "No object(s) selected."
 msgid "Error when mouse left click."
 msgstr "Error when mouse left click."
 
-#: appTools/ToolNCC.py:835
+#: appTools/ToolNCC.py:837
 msgid "NCC Tool. Checking tools for validity."
 msgstr "NCC Tool. Checking tools for validity."
 
-#: appTools/ToolNCC.py:947
-#| msgid ""
-#| "Incomplete isolation. At least one tool could not do a complete isolation."
+#: appTools/ToolNCC.py:949
 msgid ""
 "Incomplete isolation. None of the selected tools could do a complete "
 "isolation."
@@ -16318,100 +16314,98 @@ msgstr ""
 "Incomplete isolation. None of the selected tools could do a complete "
 "isolation."
 
-#: appTools/ToolNCC.py:950
-#| msgid ""
-#| "Incomplete isolation. At least one tool could not do a complete isolation."
+#: appTools/ToolNCC.py:952
 msgid "At least one of the selected tools can do a complete isolation."
 msgstr "At least one of the selected tools can do a complete isolation."
 
-#: appTools/ToolNCC.py:1722 appTools/ToolNCC.py:2646
+#: appTools/ToolNCC.py:1724 appTools/ToolNCC.py:2706
 msgid "NCC Tool. Preparing non-copper polygons."
 msgstr "NCC Tool. Preparing non-copper polygons."
 
-#: appTools/ToolNCC.py:1782 appTools/ToolNCC.py:2774
+#: appTools/ToolNCC.py:1784 appTools/ToolNCC.py:2834
 msgid "NCC Tool. Calculate 'empty' area."
 msgstr "NCC Tool. Calculate 'empty' area."
 
-#: appTools/ToolNCC.py:1793 appTools/ToolNCC.py:1822 appTools/ToolNCC.py:1928
-#: appTools/ToolNCC.py:1941 appTools/ToolNCC.py:2787 appTools/ToolNCC.py:2892
-#: appTools/ToolNCC.py:2907 appTools/ToolNCC.py:3173 appTools/ToolNCC.py:3274
-#: appTools/ToolNCC.py:3289
+#: appTools/ToolNCC.py:1795 appTools/ToolNCC.py:1824 appTools/ToolNCC.py:1930
+#: appTools/ToolNCC.py:1943 appTools/ToolNCC.py:2847 appTools/ToolNCC.py:2952
+#: appTools/ToolNCC.py:2967 appTools/ToolNCC.py:3233 appTools/ToolNCC.py:3334
+#: appTools/ToolNCC.py:3349
 msgid "Buffering finished"
 msgstr "Buffering finished"
 
-#: appTools/ToolNCC.py:1797 appTools/ToolNCC.py:1826 appTools/ToolNCC.py:1932
-#: appTools/ToolNCC.py:1944 appTools/ToolNCC.py:2795 appTools/ToolNCC.py:2914
-#: appTools/ToolNCC.py:3180 appTools/ToolNCC.py:3296
+#: appTools/ToolNCC.py:1799 appTools/ToolNCC.py:1828 appTools/ToolNCC.py:1934
+#: appTools/ToolNCC.py:1946 appTools/ToolNCC.py:2855 appTools/ToolNCC.py:2974
+#: appTools/ToolNCC.py:3240 appTools/ToolNCC.py:3356
 msgid "Could not get the extent of the area to be non copper cleared."
 msgstr "Could not get the extent of the area to be non copper cleared."
 
-#: appTools/ToolNCC.py:1805 appTools/ToolNCC.py:1955 appTools/ToolNCC.py:2925
+#: appTools/ToolNCC.py:1807 appTools/ToolNCC.py:1957 appTools/ToolNCC.py:2985
 msgid "NCC Tool. Finished calculation of 'empty' area."
 msgstr "NCC Tool. Finished calculation of 'empty' area."
 
-#: appTools/ToolNCC.py:1858 appTools/ToolNCC.py:2822 appTools/ToolNCC.py:2899
-#: appTools/ToolNCC.py:3200 appTools/ToolNCC.py:3281
+#: appTools/ToolNCC.py:1860 appTools/ToolNCC.py:2882 appTools/ToolNCC.py:2959
+#: appTools/ToolNCC.py:3260 appTools/ToolNCC.py:3341
 msgid ""
 "Isolation geometry is broken. Margin is less than isolation tool diameter."
 msgstr ""
 "Isolation geometry is broken. Margin is less than isolation tool diameter."
 
-#: appTools/ToolNCC.py:1948 appTools/ToolNCC.py:2918 appTools/ToolNCC.py:3299
+#: appTools/ToolNCC.py:1950 appTools/ToolNCC.py:2978 appTools/ToolNCC.py:3359
 msgid "The selected object is not suitable for copper clearing."
 msgstr "The selected object is not suitable for copper clearing."
 
-#: appTools/ToolNCC.py:1998
+#: appTools/ToolNCC.py:2000
 msgid "Clearing the polygon with the method: lines."
 msgstr "Clearing the polygon with the method: lines."
 
-#: appTools/ToolNCC.py:2008
+#: appTools/ToolNCC.py:2010
 msgid "Failed. Clearing the polygon with the method: seed."
 msgstr "Failed. Clearing the polygon with the method: seed."
 
-#: appTools/ToolNCC.py:2017
+#: appTools/ToolNCC.py:2019
 msgid "Failed. Clearing the polygon with the method: standard."
 msgstr "Failed. Clearing the polygon with the method: standard."
 
-#: appTools/ToolNCC.py:2033
+#: appTools/ToolNCC.py:2035
 msgid "Polygon could not be cleared. Location:"
 msgstr "Polygon could not be cleared. Location:"
 
-#: appTools/ToolNCC.py:2065 appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2595
-#: appTools/ToolNCC.py:2597
+#: appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2069 appTools/ToolNCC.py:2655
+#: appTools/ToolNCC.py:2657
 msgid "Non-Copper clearing ..."
 msgstr "Non-Copper clearing ..."
 
-#: appTools/ToolNCC.py:2086
+#: appTools/ToolNCC.py:2088
 msgid ""
 "There is no copper clearing tool in the selection and at least one is needed."
 msgstr ""
 "There is no copper clearing tool in the selection and at least one is needed."
 
-#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2742
+#: appTools/ToolNCC.py:2103 appTools/ToolNCC.py:2802
 msgid ""
 "NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
 msgstr ""
 "NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
 
-#: appTools/ToolNCC.py:2129 appTools/ToolNCC.py:2363
+#: appTools/ToolNCC.py:2131 appTools/ToolNCC.py:2365
 msgid "NCC Tool failed creating bounding box."
 msgstr "NCC Tool failed creating bounding box."
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "NCC Tool clearing with tool diameter"
 msgstr "NCC Tool clearing with tool diameter"
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "started."
 msgstr "started."
 
-#: appTools/ToolNCC.py:2277
+#: appTools/ToolNCC.py:2279
 msgid "Could not use the tool for copper clear."
 msgstr "Could not use the tool for copper clear."
 
-#: appTools/ToolNCC.py:2299 appTools/ToolNCC.py:3099
+#: appTools/ToolNCC.py:2301 appTools/ToolNCC.py:3159
 msgid ""
 "There is no NCC Geometry in the file.\n"
 "Usually it means that the tool diameter is too big for the painted "
@@ -16423,29 +16417,29 @@ msgstr ""
 "geometry.\n"
 "Change the painting parameters and try again."
 
-#: appTools/ToolNCC.py:2309 appTools/ToolNCC.py:3108
+#: appTools/ToolNCC.py:2311 appTools/ToolNCC.py:3168
 msgid "NCC Tool clear all done."
 msgstr "NCC Tool clear all done."
 
-#: appTools/ToolNCC.py:2312 appTools/ToolNCC.py:3111
+#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:3171
 msgid "NCC Tool clear all done but the copper features isolation is broken for"
 msgstr ""
 "NCC Tool clear all done but the copper features isolation is broken for"
 
-#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:2510 appTools/ToolNCC.py:3113
-#: appTools/ToolNCC.py:3496
+#: appTools/ToolNCC.py:2316 appTools/ToolNCC.py:2570 appTools/ToolNCC.py:3173
+#: appTools/ToolNCC.py:3556
 msgid "tools"
 msgstr "tools"
 
-#: appTools/ToolNCC.py:2341
+#: appTools/ToolNCC.py:2343
 msgid "NCC Tool. Rest machining copper clearing task started."
 msgstr "NCC Tool. Rest machining copper clearing task started."
 
-#: appTools/ToolNCC.py:2506 appTools/ToolNCC.py:3492
+#: appTools/ToolNCC.py:2566 appTools/ToolNCC.py:3552
 msgid "NCC Tool Rest Machining clear all done."
 msgstr "NCC Tool Rest Machining clear all done."
 
-#: appTools/ToolNCC.py:2509 appTools/ToolNCC.py:3495
+#: appTools/ToolNCC.py:2569 appTools/ToolNCC.py:3555
 msgid ""
 "NCC Tool Rest Machining clear all done but the copper features isolation is "
 "broken for"
@@ -16453,11 +16447,11 @@ msgstr ""
 "NCC Tool Rest Machining clear all done but the copper features isolation is "
 "broken for"
 
-#: appTools/ToolNCC.py:2607
+#: appTools/ToolNCC.py:2667
 msgid "NCC Tool started. Reading parameters."
 msgstr "NCC Tool started. Reading parameters."
 
-#: appTools/ToolNCC.py:3594
+#: appTools/ToolNCC.py:3654
 msgid ""
 "Try to use the Buffering Type = Full in Preferences -> Gerber General. "
 "Reload the Gerber file after this change."
@@ -16465,15 +16459,15 @@ msgstr ""
 "Try to use the Buffering Type = Full in Preferences -> Gerber General. "
 "Reload the Gerber file after this change."
 
-#: appTools/ToolNCC.py:3750
+#: appTools/ToolNCC.py:3810
 msgid "Non-Copper Clearing"
 msgstr "Non-Copper Clearing"
 
-#: appTools/ToolNCC.py:3779 appTools/ToolPaint.py:2765
+#: appTools/ToolNCC.py:3839 appTools/ToolPaint.py:2765
 msgid "Obj Type"
 msgstr "Obj Type"
 
-#: appTools/ToolNCC.py:3781
+#: appTools/ToolNCC.py:3841
 msgid ""
 "Specify the type of object to be cleared of excess copper.\n"
 "It can be of type: Gerber or Geometry.\n"
@@ -16485,11 +16479,11 @@ msgstr ""
 "What is selected here will dictate the kind\n"
 "of objects that will populate the 'Object' combobox."
 
-#: appTools/ToolNCC.py:3803
+#: appTools/ToolNCC.py:3863
 msgid "Object to be cleared of excess copper."
 msgstr "Object to be cleared of excess copper."
 
-#: appTools/ToolNCC.py:3831
+#: appTools/ToolNCC.py:3891
 msgid ""
 "This is the Tool Number.\n"
 "Non copper clearing will start with the tool with the biggest \n"
@@ -17579,6 +17573,11 @@ msgstr "Clear the text."
 msgid "...processing..."
 msgstr "...processing..."
 
+#: appTools/ToolShell.py:293
+#| msgid "FlatCAM Beta"
+msgid "FlatCAM Shell"
+msgstr "FlatCAM Shell"
+
 #: appTools/ToolSolderPaste.py:459
 msgid "Please enter a tool diameter to add, in Float format."
 msgstr "Please enter a tool diameter to add, in Float format."
@@ -18161,6 +18160,10 @@ msgstr ""
 "possible.\n"
 "Edit only one geometry at a time."
 
+#: app_Main.py:2261
+msgid "EDITOR Area"
+msgstr "EDITOR Area"
+
 #: app_Main.py:2263
 msgid "Editor is activated ..."
 msgstr "Editor is activated ..."
diff --git a/locale/es/LC_MESSAGES/strings.mo b/locale/es/LC_MESSAGES/strings.mo
index e1daca4d..c1691c18 100644
Binary files a/locale/es/LC_MESSAGES/strings.mo and b/locale/es/LC_MESSAGES/strings.mo differ
diff --git a/locale/es/LC_MESSAGES/strings.po b/locale/es/LC_MESSAGES/strings.po
index 9fe478a7..3d72c659 100644
--- a/locale/es/LC_MESSAGES/strings.po
+++ b/locale/es/LC_MESSAGES/strings.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
-"POT-Creation-Date: 2020-10-22 15:07+0300\n"
-"PO-Revision-Date: 2020-10-22 15:07+0300\n"
+"POT-Creation-Date: 2020-10-22 22:02+0300\n"
+"PO-Revision-Date: 2020-10-22 22:02+0300\n"
 "Last-Translator: Marius Stanciu - Google Translate\n"
 "Language-Team: \n"
 "Language: es\n"
@@ -108,7 +108,7 @@ msgstr "Marcadores"
 #: appDatabase.py:2998 appDatabase.py:3044 appEditors/AppExcEditor.py:1023
 #: appEditors/AppExcEditor.py:1091 appEditors/AppTextEditor.py:263
 #: appGUI/MainGUI.py:2878 appGUI/MainGUI.py:3100 appGUI/MainGUI.py:3315
-#: appObjects/FlatCAMCNCJob.py:1745 appObjects/ObjectCollection.py:126
+#: appObjects/FlatCAMCNCJob.py:1750 appObjects/ObjectCollection.py:126
 #: appTools/ToolFilm.py:238 appTools/ToolFilm.py:384 appTools/ToolImage.py:112
 #: appTools/ToolMove.py:269 appTools/ToolPcbWizard.py:189
 #: appTools/ToolPcbWizard.py:212 appTools/ToolQRCode.py:526
@@ -124,8 +124,8 @@ msgid "Cancelled."
 msgstr "Cancelado."
 
 #: Bookmark.py:308 appDatabase.py:673 appDatabase.py:3006
-#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1667
-#: appObjects/FlatCAMCNCJob.py:1857 appObjects/FlatCAMCNCJob.py:2306
+#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1672
+#: appObjects/FlatCAMCNCJob.py:1862 appObjects/FlatCAMCNCJob.py:2311
 #: appTools/ToolFilm.py:582 appTools/ToolFilm.py:830
 #: appTools/ToolSolderPaste.py:1097 app_Main.py:2666 app_Main.py:8451
 #: app_Main.py:8499 app_Main.py:8628 app_Main.py:8765 app_Main.py:8833
@@ -162,18 +162,18 @@ msgid "The user requested a graceful exit of the current task."
 msgstr "El usuario solicitó una salida elegante de la tarea actual."
 
 #: appCommon/Common.py:292 appTools/ToolCopperThieving.py:328
-#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1364
+#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1366
 msgid "Click the start point of the area."
 msgstr "Haga clic en el punto de inicio del área."
 
-#: appCommon/Common.py:351 appTools/ToolNCC.py:1423 appTools/ToolPaint.py:1210
+#: appCommon/Common.py:351 appTools/ToolNCC.py:1425 appTools/ToolPaint.py:1210
 msgid "Click the end point of the area."
 msgstr "Haga clic en el punto final del área."
 
 #: appCommon/Common.py:357 appCommon/Common.py:459
 #: appTools/ToolCopperThieving.py:385 appTools/ToolIsolation.py:2348
-#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1429
-#: appTools/ToolNCC.py:1481 appTools/ToolPaint.py:1216
+#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1431
+#: appTools/ToolNCC.py:1483 appTools/ToolPaint.py:1216
 #: appTools/ToolPaint.py:1267
 msgid "Zone added. Click to start adding next zone or right click to finish."
 msgstr ""
@@ -181,7 +181,7 @@ msgstr ""
 "clic con el botón derecho para finalizar."
 
 #: appCommon/Common.py:404 appEditors/AppGeoEditor.py:2352
-#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1452
+#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1454
 #: appTools/ToolPaint.py:1238
 msgid "Click on next Point or click right mouse button to complete ..."
 msgstr ""
@@ -292,7 +292,7 @@ msgstr "Nombre de Herram"
 #: appGUI/ObjectUI.py:1082 appGUI/ObjectUI.py:1650
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:130
 #: appTools/ToolCutOut.py:2060 appTools/ToolIsolation.py:3091
-#: appTools/ToolNCC.py:3906 appTools/ToolNCC.py:3917 appTools/ToolPaint.py:2882
+#: appTools/ToolNCC.py:3966 appTools/ToolNCC.py:3977 appTools/ToolPaint.py:2882
 msgid "Tool Dia"
 msgstr "Diá. de Herram"
 
@@ -719,13 +719,13 @@ msgstr ""
 #: appDatabase.py:307 appDatabase.py:684 appDatabase.py:718 appDatabase.py:2647
 #: appDatabase.py:3017 appDatabase.py:3051 appTools/ToolCutOut.py:294
 #: appTools/ToolDrilling.py:895 appTools/ToolIsolation.py:1067
-#: appTools/ToolNCC.py:1009 appTools/ToolPaint.py:704
+#: appTools/ToolNCC.py:1011 appTools/ToolPaint.py:704
 msgid "Could not load Tools DB file."
 msgstr "No se pudo cargar el archivo de herramientas DB."
 
 #: appDatabase.py:315 appDatabase.py:726 appDatabase.py:2655
 #: appDatabase.py:3059 appTools/ToolCutOut.py:305 appTools/ToolDrilling.py:903
-#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1020
+#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1022
 #: appTools/ToolPaint.py:715
 msgid "Failed to parse Tools DB file."
 msgstr "Error al analizar el archivo DB de Herramientas."
@@ -784,7 +784,7 @@ msgstr "Importe la base de datos de herramientas FlatCAM"
 #: appDatabase.py:3464 appObjects/FlatCAMGeometry.py:1089
 #: appTools/ToolCutOut.py:484 appTools/ToolCutOut.py:525
 #: appTools/ToolIsolation.py:2583 appTools/ToolIsolation.py:2667
-#: appTools/ToolNCC.py:3655 appTools/ToolNCC.py:3735 appTools/ToolPaint.py:2626
+#: appTools/ToolNCC.py:3715 appTools/ToolNCC.py:3795 appTools/ToolPaint.py:2626
 #: appTools/ToolPaint.py:2715 app_Main.py:5676 app_Main.py:5718
 #: app_Main.py:5749 app_Main.py:5769 app_Main.py:5779
 msgid "Tools Database"
@@ -842,7 +842,7 @@ msgstr "Parámetros de ranura"
 
 #: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
 #: appGUI/ObjectUI.py:570 appGUI/ObjectUI.py:894 appGUI/ObjectUI.py:1876
-#: appGUI/ObjectUI.py:2681 appGUI/ObjectUI.py:2748
+#: appGUI/ObjectUI.py:2693 appGUI/ObjectUI.py:2760
 #: appTools/ToolCalibration.py:929 appTools/ToolFiducials.py:681
 msgid "Name"
 msgstr "Nombre"
@@ -855,7 +855,7 @@ msgstr "Nombre"
 #: appTools/ToolDrilling.py:2065 appTools/ToolIsolation.py:3022
 #: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
 #: appTools/ToolMilling.py:1360 appTools/ToolMilling.py:1670
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 #: appTools/ToolPcbWizard.py:404 appTools/ToolProperties.py:417
 #: appTools/ToolProperties.py:480 appTools/ToolSolderPaste.py:1166
 #: tclCommands/TclCommandDrillcncjob.py:195
@@ -894,7 +894,7 @@ msgstr ""
 
 #: appDatabase.py:1186 appDatabase.py:1504
 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46
-#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:3990
+#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:4050
 msgid "Operation"
 msgstr "Operación"
 
@@ -921,7 +921,7 @@ msgstr "Perforación"
 
 #: appDatabase.py:1192 appDatabase.py:1514 appDatabase.py:2761
 #: appDatabase.py:3095 appTools/ToolIsolation.py:1101
-#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4000
+#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4060
 msgid "Isolation"
 msgstr "Aislamiento"
 
@@ -932,7 +932,7 @@ msgid "Paint"
 msgstr "Pintar"
 
 #: appDatabase.py:1192 appDatabase.py:2773 appDatabase.py:3111
-#: appTools/ToolNCC.py:1044 appTools/ToolNCC.py:3648
+#: appTools/ToolNCC.py:1046 appTools/ToolNCC.py:3708
 #, fuzzy
 #| msgid "CCW"
 msgid "NCC"
@@ -951,7 +951,7 @@ msgstr "PCB de corte"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:303
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:284
-#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4283
+#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4343
 #: appTools/ToolPaint.py:3163
 msgid "Shape"
 msgstr "Forma"
@@ -988,7 +988,7 @@ msgstr ""
 "Avance Z\n"
 "La velocidad en el plano Z."
 
-#: appDatabase.py:1506 appTools/ToolNCC.py:3992
+#: appDatabase.py:1506 appTools/ToolNCC.py:4052
 msgid ""
 "The 'Operation' can be:\n"
 "- Isolation -> will ensure that the non-copper clearing is always complete.\n"
@@ -1001,7 +1001,7 @@ msgstr ""
 "- Borrar -> la limpieza regular sin cobre."
 
 #: appDatabase.py:1513 appEditors/AppGerberEditor.py:2749
-#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:3999
+#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:4059
 msgid "Clear"
 msgstr "Limpiar"
 
@@ -1011,7 +1011,7 @@ msgstr "Limpiar"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137
 #: appTools/ToolIsolation.py:3204 appTools/ToolMilling.py:1760
-#: appTools/ToolNCC.py:4008
+#: appTools/ToolNCC.py:4068
 msgid "Milling Type"
 msgstr "Tipo de fresado"
 
@@ -1021,7 +1021,7 @@ msgstr "Tipo de fresado"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147
 #: appTools/ToolIsolation.py:3206 appTools/ToolIsolation.py:3214
-#: appTools/ToolNCC.py:4010 appTools/ToolNCC.py:4018
+#: appTools/ToolNCC.py:4070 appTools/ToolNCC.py:4078
 msgid ""
 "Milling type when the selected tool is of type: 'iso_op':\n"
 "- climb / best for precision milling and to reduce tool usage\n"
@@ -1036,7 +1036,7 @@ msgstr ""
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144
-#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4015
+#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4075
 msgid "Climb"
 msgstr "Subida"
 
@@ -1044,7 +1044,7 @@ msgstr "Subida"
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:190
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145
-#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4016
+#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4076
 msgid "Conventional"
 msgstr "Convencional"
 
@@ -1055,12 +1055,12 @@ msgstr "Convencional"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:161
 #: appTools/ToolDrilling.py:2312 appTools/ToolIsolation.py:3189
-#: appTools/ToolNCC.py:4031 appTools/ToolPaint.py:2955
+#: appTools/ToolNCC.py:4091 appTools/ToolPaint.py:2955
 msgid "Overlap"
 msgstr "Superposición"
 
 #: appDatabase.py:1544 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
-#: appTools/ToolNCC.py:4033
+#: appTools/ToolNCC.py:4093
 msgid ""
 "How much (percentage) of the tool width to overlap each tool pass.\n"
 "Adjust the value starting with lower values\n"
@@ -1092,8 +1092,8 @@ msgstr ""
 #: appTools/ToolCopperThieving.py:1204 appTools/ToolCopperThieving.py:1455
 #: appTools/ToolCorners.py:411 appTools/ToolCutOut.py:2157
 #: appTools/ToolFiducials.py:786 appTools/ToolInvertGerber.py:234
-#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4075
-#: appTools/ToolNCC.py:4178
+#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4135
+#: appTools/ToolNCC.py:4238
 msgid "Margin"
 msgstr "Margen"
 
@@ -1104,25 +1104,25 @@ msgstr "Margen"
 #: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204
 #: appTools/ToolCopperThieving.py:1206 appTools/ToolCorners.py:413
-#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4077
-#: appTools/ToolNCC.py:4180
+#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4137
+#: appTools/ToolNCC.py:4240
 msgid "Bounding box margin."
 msgstr "Margen de cuadro delimitador."
 
 #: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
-#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2172
+#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2184
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
 #: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:196
-#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4052
+#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4112
 #: appTools/ToolPaint.py:2991 appTools/ToolPunchGerber.py:793
 msgid "Method"
 msgstr "Método"
 
 #: appDatabase.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
-#: appTools/ToolNCC.py:4054
+#: appTools/ToolNCC.py:4114
 msgid ""
 "Algorithm for copper clearing:\n"
 "- Standard: Fixed step inwards.\n"
@@ -1137,7 +1137,7 @@ msgstr ""
 #: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1963 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1456
+#: appTools/ToolNCC.py:1965 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1456
 #: appTools/ToolPaint.py:3016 defaults.py:346
 #: tclCommands/TclCommandCopperClear.py:126
 #: tclCommands/TclCommandCopperClear.py:134 tclCommands/TclCommandPaint.py:125
@@ -1148,7 +1148,7 @@ msgstr "Estándar"
 #: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1974 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1470
+#: appTools/ToolNCC.py:1976 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1470
 #: appTools/ToolPaint.py:3016 defaults.py:469 defaults.py:507
 #: tclCommands/TclCommandCopperClear.py:128
 #: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
@@ -1159,7 +1159,7 @@ msgstr "Semilla"
 #: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1702
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1985 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:160
+#: appTools/ToolNCC.py:1987 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:160
 #: appTools/ToolPaint.py:1484 appTools/ToolPaint.py:3016
 #: tclCommands/TclCommandCopperClear.py:130 tclCommands/TclCommandPaint.py:129
 msgid "Lines"
@@ -1168,24 +1168,24 @@ msgstr "Líneas"
 #: appDatabase.py:1586 appDatabase.py:1701
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1996 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1649
+#: appTools/ToolNCC.py:1998 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1649
 #: appTools/ToolPaint.py:3016 tclCommands/TclCommandPaint.py:133
 msgid "Combo"
 msgstr "Combo"
 
 #: appDatabase.py:1594 appDatabase.py:1712 appEditors/AppGeoEditor.py:505
-#: appGUI/ObjectUI.py:2257 appGUI/ObjectUI.py:2280
+#: appGUI/ObjectUI.py:2269 appGUI/ObjectUI.py:2292
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:222
-#: appObjects/FlatCAMCNCJob.py:1300 appObjects/FlatCAMCNCJob.py:1322
-#: appTools/ToolNCC.py:4088 appTools/ToolNCC.py:4191 appTools/ToolPaint.py:3027
+#: appObjects/FlatCAMCNCJob.py:1305 appObjects/FlatCAMCNCJob.py:1327
+#: appTools/ToolNCC.py:4148 appTools/ToolNCC.py:4251 appTools/ToolPaint.py:3027
 msgid "Connect"
 msgstr "Conectar"
 
 #: appDatabase.py:1598 appDatabase.py:1715 appEditors/AppGeoEditor.py:507
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
-#: appTools/ToolNCC.py:4092 appTools/ToolNCC.py:4193 appTools/ToolPaint.py:3030
+#: appTools/ToolNCC.py:4152 appTools/ToolNCC.py:4253 appTools/ToolPaint.py:3030
 msgid ""
 "Draw lines between resulting\n"
 "segments to minimize tool lifts."
@@ -1196,14 +1196,14 @@ msgstr ""
 #: appDatabase.py:1604 appDatabase.py:1719 appEditors/AppGeoEditor.py:515
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:230
-#: appTools/ToolNCC.py:4098 appTools/ToolNCC.py:4199 appTools/ToolPaint.py:3034
+#: appTools/ToolNCC.py:4158 appTools/ToolNCC.py:4259 appTools/ToolPaint.py:3034
 msgid "Contour"
 msgstr "Contorno"
 
 #: appDatabase.py:1608 appDatabase.py:1722 appEditors/AppGeoEditor.py:517
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232
-#: appTools/ToolNCC.py:4102 appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3037
+#: appTools/ToolNCC.py:4162 appTools/ToolNCC.py:4261 appTools/ToolPaint.py:3037
 msgid ""
 "Cut around the perimeter of the polygon\n"
 "to trim rough edges."
@@ -1217,13 +1217,13 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
 #: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
-#: appTools/ToolNCC.py:4108 appTools/ToolNCC.py:4207 appTools/ToolPaint.py:2976
+#: appTools/ToolNCC.py:4168 appTools/ToolNCC.py:4267 appTools/ToolPaint.py:2976
 #: appTools/ToolPaint.py:3083 appTools/ToolTransform.py:517
 msgid "Offset"
 msgstr "Compensar"
 
 #: appDatabase.py:1618 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
-#: appTools/ToolNCC.py:4112 appTools/ToolNCC.py:4209
+#: appTools/ToolNCC.py:4172 appTools/ToolNCC.py:4269
 msgid ""
 "If used, it will add an offset to the copper features.\n"
 "The copper clearing will finish to a distance\n"
@@ -1716,7 +1716,7 @@ msgstr ""
 #: appTools/ToolInvertGerber.py:304 appTools/ToolInvertGerber.py:315
 #: appTools/ToolIsolation.py:3494 appTools/ToolIsolation.py:3505
 #: appTools/ToolMilling.py:2341 appTools/ToolMilling.py:2352
-#: appTools/ToolNCC.py:4448 appTools/ToolNCC.py:4459
+#: appTools/ToolNCC.py:4508 appTools/ToolNCC.py:4519
 #: appTools/ToolOptimal.py:614 appTools/ToolOptimal.py:625
 #: appTools/ToolPaint.py:3267 appTools/ToolPaint.py:3278
 #: appTools/ToolPanelize.py:914 appTools/ToolPanelize.py:925
@@ -1752,7 +1752,7 @@ msgstr "El valor editado está fuera de rango"
 #: appTools/ToolInvertGerber.py:310 appTools/ToolInvertGerber.py:317
 #: appTools/ToolIsolation.py:3500 appTools/ToolIsolation.py:3507
 #: appTools/ToolMilling.py:2347 appTools/ToolMilling.py:2354
-#: appTools/ToolNCC.py:4454 appTools/ToolNCC.py:4461
+#: appTools/ToolNCC.py:4514 appTools/ToolNCC.py:4521
 #: appTools/ToolOptimal.py:620 appTools/ToolOptimal.py:627
 #: appTools/ToolPaint.py:3273 appTools/ToolPaint.py:3280
 #: appTools/ToolPanelize.py:920 appTools/ToolPanelize.py:927
@@ -1912,8 +1912,8 @@ msgstr "Ranuras totales"
 #: appEditors/AppExcEditor.py:2003 appObjects/FlatCAMGeometry.py:706
 #: appObjects/FlatCAMGeometry.py:1232 appObjects/FlatCAMGeometry.py:1974
 #: appObjects/FlatCAMGeometry.py:2633 appTools/ToolIsolation.py:1252
-#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1195
-#: appTools/ToolNCC.py:1332 appTools/ToolPaint.py:889
+#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1197
+#: appTools/ToolNCC.py:1334 appTools/ToolPaint.py:889
 #: appTools/ToolPaint.py:1027 appTools/ToolPaint.py:1740
 #: appTools/ToolSolderPaste.py:455 appTools/ToolSolderPaste.py:527
 msgid "Wrong value format entered, use a number."
@@ -1997,7 +1997,7 @@ msgstr "Nombre:"
 
 #: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:620
 #: appGUI/ObjectUI.py:967 appTools/ToolIsolation.py:3010
-#: appTools/ToolNCC.py:3813 appTools/ToolPaint.py:2800
+#: appTools/ToolNCC.py:3873 appTools/ToolPaint.py:2800
 #: appTools/ToolSolderPaste.py:1155
 msgid "Tools Table"
 msgstr "Tabla de herramientas"
@@ -2034,7 +2034,7 @@ msgstr ""
 
 #: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1084
 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
-#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3908
+#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3968
 msgid "Diameter for the new tool"
 msgstr "Diámetro para la nueva herramienta"
 
@@ -2409,7 +2409,7 @@ msgstr "Redondo"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:289
 #: appTools/ToolDrilling.py:2588 appTools/ToolExtractDrills.py:486
 #: appTools/ToolExtractDrills.py:619 appTools/ToolIsolation.py:3430
-#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4288
+#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4348
 #: appTools/ToolPaint.py:3168 appTools/ToolPunchGerber.py:759
 #: appTools/ToolPunchGerber.py:909 appTools/ToolQRCode.py:788
 msgid "Square"
@@ -2456,6 +2456,17 @@ msgstr "Herramienta de texto"
 msgid "Font"
 msgstr "Font"
 
+#: appEditors/AppGeoEditor.py:313 appEditors/AppGerberEditor.py:2495
+#: appEditors/AppGerberEditor.py:3968 appGUI/ObjectUI.py:316
+#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
+#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
+#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
+#: appTools/ToolFiducials.py:770
+msgid "Size"
+msgstr "Tamaño"
+
 #: appEditors/AppGeoEditor.py:322 appGUI/MainGUI.py:1502
 msgid "Text"
 msgstr "Texto"
@@ -2475,7 +2486,7 @@ msgstr "Herramienta de texto"
 #: appTools/ToolIsolation.py:697 appTools/ToolIsolation.py:3166
 #: appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
 #: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:329
-#: appTools/ToolNCC.py:2278 appTools/ToolNCC.py:3980 appTools/ToolPaint.py:304
+#: appTools/ToolNCC.py:2280 appTools/ToolNCC.py:4040 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:2940
 msgid "Tool"
 msgstr "Herramienta"
@@ -2604,7 +2615,7 @@ msgstr "Origen"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:256
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
-#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4244
+#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4304
 #: appTools/ToolPaint.py:3097 appTools/ToolTransform.py:557 defaults.py:566
 msgid "Selection"
 msgstr "Selección"
@@ -2640,7 +2651,7 @@ msgid "A point of reference in format X,Y."
 msgstr "Un punto de referencia en formato X, Y."
 
 #: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
-#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2338
+#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2350
 #: appTools/ToolDblSided.py:706 appTools/ToolDblSided.py:892
 #: appTools/ToolNCC.py:63 appTools/ToolPaint.py:137
 #: appTools/ToolSolderPaste.py:160 appTools/ToolSolderPaste.py:1203
@@ -2944,7 +2955,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70
 #: appTools/ToolCalibration.py:881 appTools/ToolDrilling.py:2540
 #: appTools/ToolFilm.py:931 appTools/ToolMilling.py:2218
-#: appTools/ToolNCC.py:3802 appTools/ToolPaint.py:2788
+#: appTools/ToolNCC.py:3862 appTools/ToolPaint.py:2788
 #: appTools/ToolPanelize.py:697 appTools/ToolTransform.py:557
 msgid "Object"
 msgstr "Objeto"
@@ -3356,7 +3367,7 @@ msgstr "Línea"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290
 #: appTools/ToolDrilling.py:2589 appTools/ToolIsolation.py:3431
-#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4289
+#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4349
 #: appTools/ToolPaint.py:3169
 msgid "Polygon"
 msgstr "Polígono"
@@ -3391,7 +3402,7 @@ msgstr "Haga clic en el punto de destino."
 msgid "Editing MultiGeo Geometry, tool"
 msgstr "Edición de Geometría MultiGeo, herramienta"
 
-#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2280
+#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2282
 msgid "with diameter"
 msgstr "con diámetro"
 
@@ -3618,17 +3629,6 @@ msgstr "Tabla de Aperturas para el Objeto Gerber."
 msgid "Code"
 msgstr "Código"
 
-#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:316
-#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
-#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
-#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
-#: appTools/ToolFiducials.py:770
-msgid "Size"
-msgstr "Tamaño"
-
 #: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
 #: appGUI/ObjectUI.py:316
 msgid "Dim"
@@ -3731,7 +3731,7 @@ msgstr "Agregar una nueva apertura a la lista de apertura."
 #: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1132
 #: appObjects/FlatCAMGeometry.py:560 appTools/ToolIsolation.py:70
 #: appTools/ToolIsolation.py:3150 appTools/ToolNCC.py:69
-#: appTools/ToolNCC.py:3964 appTools/ToolPaint.py:143
+#: appTools/ToolNCC.py:4024 appTools/ToolPaint.py:143
 #: appTools/ToolPaint.py:2926 appTools/ToolSolderPaste.py:163
 #: appTools/ToolSolderPaste.py:1209 app_Main.py:6123
 msgid "Delete"
@@ -4154,20 +4154,20 @@ msgid "Open file"
 msgstr "Abrir documento"
 
 #: appEditors/AppTextEditor.py:255 appEditors/AppTextEditor.py:260
-#: appObjects/FlatCAMCNCJob.py:1641 appObjects/FlatCAMCNCJob.py:1646
-#: appObjects/FlatCAMCNCJob.py:1831 appObjects/FlatCAMCNCJob.py:1836
-#: appObjects/FlatCAMCNCJob.py:1909 appObjects/FlatCAMCNCJob.py:1914
+#: appObjects/FlatCAMCNCJob.py:1646 appObjects/FlatCAMCNCJob.py:1651
+#: appObjects/FlatCAMCNCJob.py:1836 appObjects/FlatCAMCNCJob.py:1841
+#: appObjects/FlatCAMCNCJob.py:1914 appObjects/FlatCAMCNCJob.py:1919
 #: appTools/ToolSolderPaste.py:1063 app_Main.py:7038 app_Main.py:7043
 msgid "Export Code ..."
 msgstr "Exportar el código ..."
 
-#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1663
-#: appObjects/FlatCAMCNCJob.py:1853 appObjects/FlatCAMCNCJob.py:2302
+#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1668
+#: appObjects/FlatCAMCNCJob.py:1858 appObjects/FlatCAMCNCJob.py:2307
 #: appTools/ToolSolderPaste.py:1093
 msgid "No such file or directory"
 msgstr "El fichero o directorio no existe"
 
-#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2316
+#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2321
 msgid "Saved to"
 msgstr "Guardado en"
 
@@ -4199,7 +4199,7 @@ msgstr "Guardar GCode"
 msgid "Start GCode"
 msgstr "Iniciando el código G"
 
-#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2007
+#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2012
 #: appTools/ToolCalibration.py:447
 msgid "Loaded Machine Code into Code Editor"
 msgstr "Código de máquina cargado en el editor de código"
@@ -4219,7 +4219,7 @@ msgstr "Dia"
 
 #: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:999
 #: appGUI/ObjectUI.py:2009 appTools/ToolIsolation.py:3022
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 msgid "TT"
 msgstr "TT"
 
@@ -5284,9 +5284,9 @@ msgstr "Disminuir el zoom"
 msgid "Zoom Fit"
 msgstr "Ajuste de zoom"
 
-#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:2067
-msgid "&Command Line"
-msgstr "Línea de comando"
+#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:1154
+msgid "Command Line"
+msgstr "Línea de Comando"
 
 #: appGUI/MainGUI.py:924 appGUI/MainGUI.py:2079
 msgid "2Sided Tool"
@@ -5580,10 +5580,6 @@ msgstr "Alternar la visualización del eje en el lienzo"
 msgid "Preferences"
 msgstr "Preferencias"
 
-#: appGUI/MainGUI.py:1154
-msgid "Command Line"
-msgstr "Línea de Comando"
-
 #: appGUI/MainGUI.py:1160
 msgid "HUD (Heads up display)"
 msgstr "HUD (pantalla de visualización)"
@@ -5612,11 +5608,18 @@ msgstr ""
 "Medida absoluta.\n"
 "La referencia es (X = 0, Y = 0) posición"
 
+#: appGUI/MainGUI.py:1194
+#, fuzzy
+#| msgid "Show Shell"
+msgid "TCL Shell"
+msgstr "Mostrar la línea de comando"
+
 #: appGUI/MainGUI.py:1221 appGUI/MainGUI.py:1470 app_Main.py:8143
 msgid "Project"
 msgstr "Proyecto"
 
-#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272
+#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272 appGUI/MainGUI.py:3791
+#: appGUI/MainGUI.py:3797
 msgid "Plot Area"
 msgstr "Área de la parcela"
 
@@ -5709,7 +5712,7 @@ msgstr "No guardará los cambios y cerrará la ventana de preferencias."
 msgid "Toggle Visibility"
 msgstr "Alternar visibilidad"
 
-#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2330
+#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2342
 msgid "New"
 msgstr "Nueva"
 
@@ -5722,8 +5725,8 @@ msgstr "Nueva"
 #: appTools/ToolDblSided.py:767 appTools/ToolFilm.py:929
 #: appTools/ToolFilm.py:952 appTools/ToolImage.py:136 appTools/ToolImage.py:191
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3338
-#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:803
-#: appTools/ToolNCC.py:3788 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:805
+#: appTools/ToolNCC.py:3848 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:587
@@ -5741,7 +5744,7 @@ msgstr "Geometría"
 #: appTools/ToolDblSided.py:527 appTools/ToolDblSided.py:724
 #: appTools/ToolDblSided.py:766 appTools/ToolFilm.py:1207
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPunchGerber.py:803 appTools/ToolPunchGerber.py:818
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:586
@@ -5858,12 +5861,16 @@ msgstr "Sí"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:148
 #: appTools/ToolDrilling.py:2090 appTools/ToolIsolation.py:3066
-#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3875
+#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3935
 #: appTools/ToolPaint.py:2851 appTranslation.py:113 appTranslation.py:215
 #: app_Main.py:2290 app_Main.py:3385 app_Main.py:5810 app_Main.py:6894
 msgid "No"
 msgstr "No"
 
+#: appGUI/MainGUI.py:2067
+msgid "&Command Line"
+msgstr "Línea de comando"
+
 #: appGUI/MainGUI.py:2086
 msgid "&Cutout Tool"
 msgstr "Herramienta de recorte"
@@ -6601,7 +6608,7 @@ msgstr ""
 "Crear un objeto de geometría con\n"
 "Trayectorias para cortar alrededor de polígonos."
 
-#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4315
+#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4375
 msgid ""
 "Create the Geometry Object\n"
 "for non-copper routing."
@@ -6671,7 +6678,7 @@ msgstr "La geometría resultante tendrá esquinas redondeadas."
 
 #: appGUI/ObjectUI.py:467 appGUI/ObjectUI.py:507 appTools/ToolCutOut.py:2287
 #: appTools/ToolCutOut.py:2302 appTools/ToolIsolation.py:3444
-#: appTools/ToolNCC.py:4312 appTools/ToolPaint.py:3178
+#: appTools/ToolNCC.py:4372 appTools/ToolPaint.py:3178
 msgid "Generate Geometry"
 msgstr "Generar Geometría"
 
@@ -7037,14 +7044,14 @@ msgstr ""
 "corte y negativo para corte 'interior'."
 
 #: appGUI/ObjectUI.py:1079 appTools/ToolIsolation.py:3087
-#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3902 appTools/ToolPaint.py:140
+#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3962 appTools/ToolPaint.py:140
 #: appTools/ToolPaint.py:2878
 msgid "Add from DB"
 msgstr "Agregar desde DB"
 
 #: appGUI/ObjectUI.py:1096 appTools/ToolCutOut.py:2071
 #: appTools/ToolIsolation.py:61 appTools/ToolIsolation.py:3122
-#: appTools/ToolNCC.py:3936 appTools/ToolPaint.py:2898
+#: appTools/ToolNCC.py:3996 appTools/ToolPaint.py:2898
 msgid "Search and Add"
 msgstr ""
 
@@ -7058,14 +7065,14 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1103 appTools/ToolCutOut.py:2083
 #: appTools/ToolIsolation.py:65 appTools/ToolIsolation.py:3133
-#: appTools/ToolNCC.py:3947 appTools/ToolPaint.py:2909
+#: appTools/ToolNCC.py:4007 appTools/ToolPaint.py:2909
 #, fuzzy
 #| msgid "Add from DB"
 msgid "Pick from DB"
 msgstr "Agregar desde DB"
 
 #: appGUI/ObjectUI.py:1106 appTools/ToolCutOut.py:2086
-#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:3950
+#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:4010
 #: appTools/ToolPaint.py:2912
 #, fuzzy
 #| msgid ""
@@ -7112,8 +7119,8 @@ msgstr ""
 #: appTools/ToolMilling.py:779 appTools/ToolMilling.py:790
 #: appTools/ToolMilling.py:794 appTools/ToolMilling.py:1711
 #: appTools/ToolNCC.py:271 appTools/ToolNCC.py:276 appTools/ToolNCC.py:306
-#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
-#: appTools/ToolNCC.py:3980 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
+#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
+#: appTools/ToolNCC.py:4040 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
 #: appTools/ToolPaint.py:282 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:316 appTools/ToolPaint.py:655
 #: appTools/ToolPaint.py:2940
@@ -7122,7 +7129,7 @@ msgstr "Parámetros para"
 
 #: appGUI/ObjectUI.py:1175 appTools/ToolDrilling.py:2119
 #: appTools/ToolIsolation.py:3169 appTools/ToolMilling.py:1714
-#: appTools/ToolNCC.py:3983 appTools/ToolPaint.py:2943
+#: appTools/ToolNCC.py:4043 appTools/ToolPaint.py:2943
 msgid ""
 "The data used for creating GCode.\n"
 "Each tool store it's own set of such data."
@@ -7274,7 +7281,7 @@ msgstr ""
 msgid "Number of time units for spindle to dwell."
 msgstr "Número de unidades de tiempo para que el husillo permanezca."
 
-#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2128
+#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2140
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333
@@ -7282,7 +7289,7 @@ msgstr "Número de unidades de tiempo para que el husillo permanezca."
 msgid "Probe Z depth"
 msgstr "Profundidad de la sonda Z"
 
-#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2130
+#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2142
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335
@@ -7301,7 +7308,7 @@ msgstr ""
 msgid "Feedrate Probe"
 msgstr "Sonda de avance"
 
-#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2143
+#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2155
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348
@@ -7311,13 +7318,13 @@ msgstr "La velocidad de avance utilizada mientras la sonda está sondeando."
 
 #: appGUI/ObjectUI.py:1434 appTools/ToolDrilling.py:2364
 #: appTools/ToolIsolation.py:3265 appTools/ToolMilling.py:2042
-#: appTools/ToolNCC.py:4141 appTools/ToolPaint.py:3049
+#: appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3049
 msgid "Apply parameters to all tools"
 msgstr "Aplicar Parám. a todas las herramientas"
 
 #: appGUI/ObjectUI.py:1437 appTools/ToolDrilling.py:2367
 #: appTools/ToolIsolation.py:3268 appTools/ToolMilling.py:2045
-#: appTools/ToolNCC.py:4144 appTools/ToolPaint.py:3052
+#: appTools/ToolNCC.py:4204 appTools/ToolPaint.py:3052
 msgid ""
 "The parameters in the current form will be applied\n"
 "on all the tools from the Tool Table."
@@ -7327,13 +7334,13 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1448 appTools/ToolDrilling.py:2378
 #: appTools/ToolIsolation.py:3279 appTools/ToolMilling.py:2056
-#: appTools/ToolNCC.py:4155 appTools/ToolPaint.py:3063
+#: appTools/ToolNCC.py:4215 appTools/ToolPaint.py:3063
 msgid "Common Parameters"
 msgstr "Parámetros comunes"
 
 #: appGUI/ObjectUI.py:1450 appTools/ToolDrilling.py:2380
 #: appTools/ToolIsolation.py:3281 appTools/ToolMilling.py:2058
-#: appTools/ToolNCC.py:4157 appTools/ToolPaint.py:3065
+#: appTools/ToolNCC.py:4217 appTools/ToolPaint.py:3065
 msgid "Parameters that are common for all tools."
 msgstr "Parámetros que son comunes para todas las herramientas."
 
@@ -7536,7 +7543,7 @@ msgstr "Agregar un área de exclusión."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286
 #: appTools/ToolDrilling.py:2591 appTools/ToolIsolation.py:3427
-#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4285
+#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4345
 #: appTools/ToolPaint.py:3165
 msgid "The kind of selection shape used for area selection."
 msgstr "El tipo de forma de selección utilizada para la selección de área."
@@ -7780,97 +7787,97 @@ msgstr ""
 msgid "Autolevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2052
+#: appGUI/ObjectUI.py:2053
 msgid "Enable the autolevelling feature."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2069
+#: appGUI/ObjectUI.py:2081
 #, fuzzy
 #| msgid "Tools Table"
 msgid "Probe Points Table"
 msgstr "Tabla de herramientas"
 
-#: appGUI/ObjectUI.py:2070
+#: appGUI/ObjectUI.py:2082
 msgid "Generate GCode that will obtain the height map"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2072
+#: appGUI/ObjectUI.py:2084
 msgid "Show"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2073
+#: appGUI/ObjectUI.py:2085
 #, fuzzy
 #| msgid "Toggle the display of axis on canvas"
 msgid "Toggle the display of the Probe Points table."
 msgstr "Alternar la visualización del eje en el lienzo"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 #, fuzzy
 #| msgid "Coordinates"
 msgid "X-Y Coordinates"
 msgstr "Coordenadas"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 #, fuzzy
 #| msgid "Light"
 msgid "Height"
 msgstr "Ligera"
 
-#: appGUI/ObjectUI.py:2090
+#: appGUI/ObjectUI.py:2102
 #, fuzzy
 #| msgid "Plot Options"
 msgid "Plot probing points"
 msgstr "Opciones de parcela"
 
-#: appGUI/ObjectUI.py:2092
+#: appGUI/ObjectUI.py:2104
 msgid ""
 "Plot the probing points in the table.\n"
 "If a Voronoi method is used then\n"
 "the Voronoi areas are also plotted."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2107
+#: appGUI/ObjectUI.py:2119
 #, fuzzy
 #| msgid "Finished G-Code generation"
 msgid "Probe GCode Generation"
 msgstr "Generación de código G terminada"
 
-#: appGUI/ObjectUI.py:2109
+#: appGUI/ObjectUI.py:2121
 msgid ""
 "Will create a GCode which will be sent to the controller,\n"
 "either through a file or directly, with the intent to get the height map\n"
 "that is to modify the original GCode to level the cutting height."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2116
+#: appGUI/ObjectUI.py:2128
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
 #, fuzzy
 #| msgid "Probe Z depth"
 msgid "Probe Z travel"
 msgstr "Profundidad de la sonda Z"
 
-#: appGUI/ObjectUI.py:2118
+#: appGUI/ObjectUI.py:2130
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
 #, fuzzy
 #| msgid "Height (Z) for travelling between the points."
 msgid "The safe Z for probe travelling between probe points."
 msgstr "Altura (Z) para viajar entre los puntos."
 
-#: appGUI/ObjectUI.py:2141
+#: appGUI/ObjectUI.py:2153
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
 #, fuzzy
 #| msgid "Feedrate"
 msgid "Probe Feedrate"
 msgstr "Avance"
 
-#: appGUI/ObjectUI.py:2158
+#: appGUI/ObjectUI.py:2170
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
 #, fuzzy
 #| msgid "Mode:"
 msgid "Mode"
 msgstr "Modo:"
 
-#: appGUI/ObjectUI.py:2159
+#: appGUI/ObjectUI.py:2171
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
 msgid ""
 "Choose a mode for height map generation.\n"
@@ -7878,21 +7885,21 @@ msgid ""
 "- Grid: will automatically generate a grid of probe points"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2165
+#: appGUI/ObjectUI.py:2177
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
 #: appTools/ToolCutOut.py:2324 appTools/ToolFiducials.py:801
 msgid "Manual"
 msgstr "Manual"
 
-#: appGUI/ObjectUI.py:2166
+#: appGUI/ObjectUI.py:2178
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
 #, fuzzy
 #| msgid "Grids"
 msgid "Grid"
 msgstr "Rejillas"
 
-#: appGUI/ObjectUI.py:2173
+#: appGUI/ObjectUI.py:2185
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
 msgid ""
 "Choose a method for approximation of heights from autolevelling data.\n"
@@ -7900,125 +7907,125 @@ msgid ""
 "- Bilinear: will use bilinear interpolation. Usable only for grid mode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2179
+#: appGUI/ObjectUI.py:2191
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
 msgid "Voronoi"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2180
+#: appGUI/ObjectUI.py:2192
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
 #, fuzzy
 #| msgid "Linear"
 msgid "Bilinear"
 msgstr "Lineal"
 
-#: appGUI/ObjectUI.py:2193
+#: appGUI/ObjectUI.py:2205
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
 #: appTools/ToolPanelize.py:787
 msgid "Columns"
 msgstr "Columnas"
 
-#: appGUI/ObjectUI.py:2195
+#: appGUI/ObjectUI.py:2207
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
 msgid "The number of grid columns."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2204
+#: appGUI/ObjectUI.py:2216
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
 #: appTools/ToolPanelize.py:797
 msgid "Rows"
 msgstr "Filas"
 
-#: appGUI/ObjectUI.py:2206
+#: appGUI/ObjectUI.py:2218
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
 msgid "The number of gird rows."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2211
+#: appGUI/ObjectUI.py:2223
 #, fuzzy
 #| msgid "Get Points"
 msgid "Add Probe Points"
 msgstr "Obtener puntos"
 
-#: appGUI/ObjectUI.py:2219
+#: appGUI/ObjectUI.py:2231
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
 #, fuzzy
 #| msgid "Contour"
 msgid "Controller"
 msgstr "Contorno"
 
-#: appGUI/ObjectUI.py:2221
+#: appGUI/ObjectUI.py:2233
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
 msgid ""
 "The kind of controller for which to generate\n"
 "height map gcode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2267 appGUI/ObjectUI.py:2282
-#: appObjects/FlatCAMCNCJob.py:1302 appObjects/FlatCAMCNCJob.py:1324
+#: appGUI/ObjectUI.py:2279 appGUI/ObjectUI.py:2294
+#: appObjects/FlatCAMCNCJob.py:1307 appObjects/FlatCAMCNCJob.py:1329
 #, fuzzy
 #| msgid "Contour"
 msgid "Control"
 msgstr "Contorno"
 
-#: appGUI/ObjectUI.py:2277 appGUI/ObjectUI.py:2284
-#: appObjects/FlatCAMCNCJob.py:1304 appObjects/FlatCAMCNCJob.py:1326
+#: appGUI/ObjectUI.py:2289 appGUI/ObjectUI.py:2296
+#: appObjects/FlatCAMCNCJob.py:1309 appObjects/FlatCAMCNCJob.py:1331
 #, fuzzy
 #| msgid "Rendered"
 msgid "Sender"
 msgstr "Rendido"
 
-#: appGUI/ObjectUI.py:2298
+#: appGUI/ObjectUI.py:2310
 msgid "COM list"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2300 appGUI/ObjectUI.py:2315
+#: appGUI/ObjectUI.py:2312 appGUI/ObjectUI.py:2327
 msgid "Lists the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2304
+#: appGUI/ObjectUI.py:2316
 msgid "Search"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2306
+#: appGUI/ObjectUI.py:2318
 msgid "Search for the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2313
+#: appGUI/ObjectUI.py:2325
 msgid "Baud rates"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2332
+#: appGUI/ObjectUI.py:2344
 msgid "New, custom baudrate."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2340
+#: appGUI/ObjectUI.py:2352
 msgid "Add the specified custom baudrate to the list."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2346
+#: appGUI/ObjectUI.py:2358
 #, fuzzy
 #| msgid "Delete Selected"
 msgid "Delete selected baudrate"
 msgstr "Eliminar seleccionado"
 
-#: appGUI/ObjectUI.py:2350
+#: appGUI/ObjectUI.py:2362
 msgid "Reset"
 msgstr "Reiniciar"
 
-#: appGUI/ObjectUI.py:2352
+#: appGUI/ObjectUI.py:2364
 msgid "Software reset of the controller."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2358 appObjects/FlatCAMCNCJob.py:1318
+#: appGUI/ObjectUI.py:2370 appObjects/FlatCAMCNCJob.py:1323
 #, fuzzy
 #| msgid "Connect"
 msgid "Disconnected"
 msgstr "Conectar"
 
-#: appGUI/ObjectUI.py:2360
+#: appGUI/ObjectUI.py:2372
 #, fuzzy
 #| msgid ""
 #| "Create a Gerber object from the selected object, within\n"
@@ -8028,131 +8035,131 @@ msgstr ""
 "Cree un objeto Gerber a partir del objeto seleccionado, dentro de\n"
 "El cuadro especificado."
 
-#: appGUI/ObjectUI.py:2385
+#: appGUI/ObjectUI.py:2397
 msgid "Jog"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2393
+#: appGUI/ObjectUI.py:2405
 #, fuzzy
 #| msgid "Zeros"
 msgid "Zero Axes"
 msgstr "Ceros"
 
-#: appGUI/ObjectUI.py:2426
+#: appGUI/ObjectUI.py:2438
 msgid "Pause/Resume"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2448
+#: appGUI/ObjectUI.py:2460
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
 msgid "Step"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2450
+#: appGUI/ObjectUI.py:2462
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
 msgid "Each jog action will move the axes with this value."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2462
+#: appGUI/ObjectUI.py:2474
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89
 #: appObjects/FlatCAMObj.py:831 appTools/ToolProperties.py:529
 msgid "Feedrate"
 msgstr "Avance"
 
-#: appGUI/ObjectUI.py:2464
+#: appGUI/ObjectUI.py:2476
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
 msgid "Feedrate when jogging."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2484
+#: appGUI/ObjectUI.py:2496
 msgid "Send Command"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2486 appGUI/ObjectUI.py:2496
+#: appGUI/ObjectUI.py:2498 appGUI/ObjectUI.py:2508
 msgid "Send a custom command to GRBL."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2491
+#: appGUI/ObjectUI.py:2503
 msgid "Type GRBL command ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2494
+#: appGUI/ObjectUI.py:2506
 msgid "Send"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2502
+#: appGUI/ObjectUI.py:2514
 #, fuzzy
 #| msgid "Text to PDF parameters"
 msgid "Get Config parameter"
 msgstr "Parámetros de texto a PDF"
 
-#: appGUI/ObjectUI.py:2504
+#: appGUI/ObjectUI.py:2516
 msgid "A GRBL configuration parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2509
+#: appGUI/ObjectUI.py:2521
 msgid "Type GRBL parameter ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2512
+#: appGUI/ObjectUI.py:2524
 #, fuzzy
 #| msgid "Geo"
 msgid "Get"
 msgstr "Geo"
 
-#: appGUI/ObjectUI.py:2514
+#: appGUI/ObjectUI.py:2526
 msgid "Get the value of a specified GRBL parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2522
+#: appGUI/ObjectUI.py:2534
 #, fuzzy
 #| msgid "Gerber Export"
 msgid "Get Report"
 msgstr "Gerber Export"
 
-#: appGUI/ObjectUI.py:2524
+#: appGUI/ObjectUI.py:2536
 msgid "Print in shell the GRBL report."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2530
+#: appGUI/ObjectUI.py:2542
 msgid "Apply AutoLevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2532
+#: appGUI/ObjectUI.py:2544
 msgid ""
 "Will send the probing GCode to the GRBL controller,\n"
 "wait for the Z probing data and then apply this data\n"
 "over the original GCode therefore doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2541
+#: appGUI/ObjectUI.py:2553
 msgid "Will save the GRBL height map."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2551
+#: appGUI/ObjectUI.py:2563
 #, fuzzy
 #| msgid "Starting G-Code"
 msgid "Save Probing GCode"
 msgstr "Iniciando el código G"
 
-#: appGUI/ObjectUI.py:2553
+#: appGUI/ObjectUI.py:2565
 #, fuzzy
 #| msgid "Starting G-Code"
 msgid "Will save the probing GCode."
 msgstr "Iniciando el código G"
 
-#: appGUI/ObjectUI.py:2562
+#: appGUI/ObjectUI.py:2574
 msgid "View/Edit the probing GCode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2569 appObjects/FlatCAMCNCJob.py:1735
-#: appObjects/FlatCAMCNCJob.py:1739
+#: appGUI/ObjectUI.py:2581 appObjects/FlatCAMCNCJob.py:1740
+#: appObjects/FlatCAMCNCJob.py:1744
 #, fuzzy
 #| msgid "Import List"
 msgid "Import Height Map"
 msgstr "Importar la lista"
 
-#: appGUI/ObjectUI.py:2571
+#: appGUI/ObjectUI.py:2583
 msgid ""
 "Import the file that has the Z heights\n"
 "obtained through probing and then apply this data\n"
@@ -8160,11 +8167,11 @@ msgid ""
 "doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2589
+#: appGUI/ObjectUI.py:2601
 msgid "Export CNC Code"
 msgstr "Exportar código CNC"
 
-#: appGUI/ObjectUI.py:2591
+#: appGUI/ObjectUI.py:2603
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
 msgid ""
@@ -8174,11 +8181,11 @@ msgstr ""
 "Exportar y guardar código G a\n"
 "Hacer este objeto a un archivo."
 
-#: appGUI/ObjectUI.py:2600
+#: appGUI/ObjectUI.py:2612
 msgid "Save CNC Code"
 msgstr "Guardar código CNC"
 
-#: appGUI/ObjectUI.py:2603
+#: appGUI/ObjectUI.py:2615
 msgid ""
 "Opens dialog to save G-Code\n"
 "file."
@@ -8186,86 +8193,86 @@ msgstr ""
 "Abre el diálogo para guardar el código G\n"
 "expediente."
 
-#: appGUI/ObjectUI.py:2610
+#: appGUI/ObjectUI.py:2622
 #, fuzzy
 #| msgid "View CNC Code"
 msgid "Review CNC Code."
 msgstr "Ver código CNC"
 
-#: appGUI/ObjectUI.py:2671
+#: appGUI/ObjectUI.py:2683
 msgid "Script Object"
 msgstr "Objeto de script"
 
-#: appGUI/ObjectUI.py:2691 appGUI/ObjectUI.py:2765
+#: appGUI/ObjectUI.py:2703 appGUI/ObjectUI.py:2777
 msgid "Auto Completer"
 msgstr "Autocompletador"
 
-#: appGUI/ObjectUI.py:2693
+#: appGUI/ObjectUI.py:2705
 msgid "This selects if the auto completer is enabled in the Script Editor."
 msgstr ""
 "Esto selecciona si el autocompletador está habilitado en el Editor de "
 "secuencias de comandos."
 
-#: appGUI/ObjectUI.py:2738
+#: appGUI/ObjectUI.py:2750
 msgid "Document Object"
 msgstr "Objeto de Documento"
 
-#: appGUI/ObjectUI.py:2767
+#: appGUI/ObjectUI.py:2779
 msgid "This selects if the auto completer is enabled in the Document Editor."
 msgstr ""
 "Esto selecciona si el autocompletador está habilitado en el Editor de "
 "Documentos."
 
-#: appGUI/ObjectUI.py:2785
+#: appGUI/ObjectUI.py:2797
 msgid "Font Type"
 msgstr "Tipo de Fuente"
 
-#: appGUI/ObjectUI.py:2802
+#: appGUI/ObjectUI.py:2814
 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
 msgid "Font Size"
 msgstr "Tamaño de Fuente"
 
-#: appGUI/ObjectUI.py:2838
+#: appGUI/ObjectUI.py:2850
 msgid "Alignment"
 msgstr "Alineación"
 
-#: appGUI/ObjectUI.py:2843
+#: appGUI/ObjectUI.py:2855
 msgid "Align Left"
 msgstr "Alinear a la izquierda"
 
-#: appGUI/ObjectUI.py:2848 app_Main.py:4993
+#: appGUI/ObjectUI.py:2860 app_Main.py:4993
 msgid "Center"
 msgstr "Centrar"
 
-#: appGUI/ObjectUI.py:2853
+#: appGUI/ObjectUI.py:2865
 msgid "Align Right"
 msgstr "Alinear a la derecha"
 
-#: appGUI/ObjectUI.py:2858
+#: appGUI/ObjectUI.py:2870
 msgid "Justify"
 msgstr "Alinear Justificar"
 
-#: appGUI/ObjectUI.py:2865
+#: appGUI/ObjectUI.py:2877
 msgid "Font Color"
 msgstr "Color de Fuente"
 
-#: appGUI/ObjectUI.py:2867
+#: appGUI/ObjectUI.py:2879
 msgid "Set the font color for the selected text"
 msgstr "Establecer el color de fuente para el texto seleccionado"
 
-#: appGUI/ObjectUI.py:2881
+#: appGUI/ObjectUI.py:2893
 msgid "Selection Color"
 msgstr "Color de seleccion"
 
-#: appGUI/ObjectUI.py:2883
+#: appGUI/ObjectUI.py:2895
 msgid "Set the selection color when doing text selection."
 msgstr "Establezca el color de selección al hacer la selección de texto."
 
-#: appGUI/ObjectUI.py:2897
+#: appGUI/ObjectUI.py:2909
 msgid "Tab Size"
 msgstr "Tamaño de Pestaña"
 
-#: appGUI/ObjectUI.py:2899
+#: appGUI/ObjectUI.py:2911
 msgid "Set the tab size. In pixels. Default value is 80 pixels."
 msgstr ""
 "Establece el tamaño de la pestaña. En píxeles El valor predeterminado es 80 "
@@ -10443,10 +10450,10 @@ msgstr "\"Seguir\""
 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64
 #: appObjects/FlatCAMGerber.py:370 appTools/ToolCopperThieving.py:581
 #: appTools/ToolCopperThieving.py:770 appTools/ToolCopperThieving.py:782
-#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1791
-#: appTools/ToolNCC.py:1818 appTools/ToolNCC.py:1926 appTools/ToolNCC.py:1939
-#: appTools/ToolNCC.py:2785 appTools/ToolNCC.py:2890 appTools/ToolNCC.py:2905
-#: appTools/ToolNCC.py:3171 appTools/ToolNCC.py:3272 appTools/ToolNCC.py:3287
+#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1793
+#: appTools/ToolNCC.py:1820 appTools/ToolNCC.py:1928 appTools/ToolNCC.py:1941
+#: appTools/ToolNCC.py:2845 appTools/ToolNCC.py:2950 appTools/ToolNCC.py:2965
+#: appTools/ToolNCC.py:3231 appTools/ToolNCC.py:3332 appTools/ToolNCC.py:3347
 #: camlib.py:1113
 msgid "Buffering"
 msgstr "Tamponamiento"
@@ -10775,9 +10782,9 @@ msgstr ""
 
 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
-#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1349
-#: appTools/ToolNCC.py:1665 appTools/ToolNCC.py:1729 appTools/ToolNCC.py:2649
-#: appTools/ToolNCC.py:2658 appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4376
+#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1351
+#: appTools/ToolNCC.py:1667 appTools/ToolNCC.py:1731 appTools/ToolNCC.py:2709
+#: appTools/ToolNCC.py:2718 appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4436
 #: defaults.py:475 tclCommands/TclCommandCopperClear.py:190
 msgid "Itself"
 msgstr "Sí mismo"
@@ -10788,8 +10795,8 @@ msgstr "Sí mismo"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1219 appTools/ToolIsolation.py:819
 #: appTools/ToolIsolation.py:1435 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1363 appTools/ToolNCC.py:1681 appTools/ToolNCC.py:1736
-#: appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4386 appTools/ToolPaint.py:1061
+#: appTools/ToolNCC.py:1365 appTools/ToolNCC.py:1683 appTools/ToolNCC.py:1738
+#: appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4446 appTools/ToolPaint.py:1061
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3249
 msgid "Area Selection"
 msgstr "Selección de área"
@@ -10800,9 +10807,9 @@ msgstr "Selección de área"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1220 appTools/ToolDblSided.py:757
 #: appTools/ToolIsolation.py:1475 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1382 appTools/ToolNCC.py:1687 appTools/ToolNCC.py:1744
-#: appTools/ToolNCC.py:2122 appTools/ToolNCC.py:2356 appTools/ToolNCC.py:2694
-#: appTools/ToolNCC.py:4240 appTools/ToolPaint.py:1080
+#: appTools/ToolNCC.py:1384 appTools/ToolNCC.py:1689 appTools/ToolNCC.py:1746
+#: appTools/ToolNCC.py:2124 appTools/ToolNCC.py:2358 appTools/ToolNCC.py:2754
+#: appTools/ToolNCC.py:4300 appTools/ToolPaint.py:1080
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3232
 #: tclCommands/TclCommandCopperClear.py:192 tclCommands/TclCommandPaint.py:166
 msgid "Reference Object"
@@ -12151,7 +12158,7 @@ msgstr "Crear geometría para fresar agujeros."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:140
 #: appTools/ToolDrilling.py:2082 appTools/ToolIsolation.py:3058
-#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3867
+#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3927
 #: appTools/ToolPaint.py:2843
 msgid "Tool order"
 msgstr "Orden de la Herram"
@@ -12162,8 +12169,8 @@ msgstr "Orden de la Herram"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141
 #: appTools/ToolDrilling.py:2083 appTools/ToolIsolation.py:3059
-#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3868
-#: appTools/ToolNCC.py:3878 appTools/ToolPaint.py:2844
+#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3928
+#: appTools/ToolNCC.py:3938 appTools/ToolPaint.py:2844
 #: appTools/ToolPaint.py:2854
 msgid ""
 "This set the way that the tools in the tools table are used.\n"
@@ -12190,7 +12197,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:149
 #: appTools/ToolDrilling.py:2091 appTools/ToolIsolation.py:3067
-#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3876
+#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3936
 #: appTools/ToolPaint.py:2852
 msgid "Forward"
 msgstr "Adelante"
@@ -12200,7 +12207,7 @@ msgstr "Adelante"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150
 #: appTools/ToolDrilling.py:2092 appTools/ToolIsolation.py:3068
-#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3877
+#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3937
 #: appTools/ToolPaint.py:2853
 msgid "Reverse"
 msgstr "Atras"
@@ -12564,7 +12571,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:242
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243
-#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4162
+#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4222
 #: appTools/ToolPaint.py:3069
 msgid "Rest"
 msgstr "Resto"
@@ -12617,13 +12624,13 @@ msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:350
-#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4298
+#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4358
 msgid "Check validity"
 msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:352
-#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4300
+#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4360
 msgid ""
 "If checked then the tools diameters are verified\n"
 "if they will provide a complete isolation."
@@ -12747,7 +12754,7 @@ msgstr ""
 "de las características de cobre.\n"
 "El valor puede estar entre 0 y 9999.9 unidades FlatCAM."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4166
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4226
 msgid ""
 "If checked, use 'rest machining'.\n"
 "Basically it will clear copper outside PCB features,\n"
@@ -12766,7 +12773,7 @@ msgstr ""
 "no más cobre para limpiar o no hay más herramientas.\n"
 "Si no está marcado, use el algoritmo estándar."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4246
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4306
 msgid ""
 "Selection of area to be processed.\n"
 "- 'Itself' - the processing extent is based on the object that is "
@@ -12908,7 +12915,7 @@ msgstr "Número de filas del panel deseado"
 #: appTools/ToolFilm.py:951 appTools/ToolImage.py:117 appTools/ToolImage.py:138
 #: appTools/ToolImage.py:191 appTools/ToolIsolation.py:802
 #: appTools/ToolIsolation.py:3339 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:3789 appTools/ToolNCC.py:4263
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:3849 appTools/ToolNCC.py:4323
 #: appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
 #: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167
 #: appTools/ToolPanelize.py:715 appTools/ToolPanelize.py:809
@@ -13433,33 +13440,33 @@ msgstr ""
 msgid "created/selected"
 msgstr "creado / seleccionado"
 
-#: appObjects/FlatCAMCNCJob.py:637 appObjects/FlatCAMDocument.py:71
+#: appObjects/FlatCAMCNCJob.py:642 appObjects/FlatCAMDocument.py:71
 #: appObjects/FlatCAMScript.py:82
 msgid "<span style=\"color:green;\"><b>Basic</b></span>"
 msgstr "<span style=\"color:green;\"><b>Basic</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:644 appObjects/FlatCAMDocument.py:75
+#: appObjects/FlatCAMCNCJob.py:649 appObjects/FlatCAMDocument.py:75
 #: appObjects/FlatCAMScript.py:86
 msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
 msgstr "<span style=\"color:red;\"><b>Avanzado</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:780 appObjects/FlatCAMCNCJob.py:1058
+#: appObjects/FlatCAMCNCJob.py:785 appObjects/FlatCAMCNCJob.py:1063
 msgid ""
 "Voronoi function can not be loaded.\n"
 "Shapely >= 1.8 is required"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:808
+#: appObjects/FlatCAMCNCJob.py:813
 #, fuzzy
 #| msgid "Click on Start point ..."
 msgid "Click on canvas to add a Probe Point..."
 msgstr "Haga clic en el punto de inicio ..."
 
-#: appObjects/FlatCAMCNCJob.py:1004
+#: appObjects/FlatCAMCNCJob.py:1009
 msgid "Point is not within the object area. Choose another point."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1024
+#: appObjects/FlatCAMCNCJob.py:1029
 #, fuzzy
 #| msgid ""
 #| "Zone added. Click to start adding next zone or right click to finish."
@@ -13470,139 +13477,139 @@ msgstr ""
 "Zona agregada. Haga clic para comenzar a agregar la siguiente zona o haga "
 "clic con el botón derecho para finalizar."
 
-#: appObjects/FlatCAMCNCJob.py:1046
+#: appObjects/FlatCAMCNCJob.py:1051
 #, fuzzy
 #| msgid "Finished G-Code processing..."
 msgid "Finished adding Probe Points..."
 msgstr "Procesamiento de código G terminado ..."
 
-#: appObjects/FlatCAMCNCJob.py:1260
+#: appObjects/FlatCAMCNCJob.py:1265
 #, fuzzy
 #| msgid "Click to place ..."
 msgid "COM list updated ..."
 msgstr "Haga clic para colocar ..."
 
-#: appObjects/FlatCAMCNCJob.py:1296
+#: appObjects/FlatCAMCNCJob.py:1301
 #, fuzzy
 #| msgid "Connect"
 msgid "Connected"
 msgstr "Conectar"
 
-#: appObjects/FlatCAMCNCJob.py:1307
+#: appObjects/FlatCAMCNCJob.py:1312
 msgid "Port connected"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1311
+#: appObjects/FlatCAMCNCJob.py:1316
 msgid "Could not connect to GRBL on port"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1328
+#: appObjects/FlatCAMCNCJob.py:1333
 msgid "Port is connected. Disconnecting"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1330
+#: appObjects/FlatCAMCNCJob.py:1335
 #, fuzzy
 #| msgid "Could not retrieve box object"
 msgid "Could not connect to port"
 msgstr "No se pudo recuperar el objeto"
 
-#: appObjects/FlatCAMCNCJob.py:1360 appObjects/FlatCAMCNCJob.py:1790
+#: appObjects/FlatCAMCNCJob.py:1365 appObjects/FlatCAMCNCJob.py:1795
 #, fuzzy
 #| msgid "Opening G-Code."
 msgid "Sending GCode..."
 msgstr "Apertura del código G."
 
-#: appObjects/FlatCAMCNCJob.py:1489
+#: appObjects/FlatCAMCNCJob.py:1494
 msgid "GRBL is doing a home cycle."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1495
+#: appObjects/FlatCAMCNCJob.py:1500
 msgid "GRBL software reset was sent."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1503
+#: appObjects/FlatCAMCNCJob.py:1508
 msgid "GRBL resumed."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1507
+#: appObjects/FlatCAMCNCJob.py:1512
 msgid "GRBL paused."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1649 appObjects/FlatCAMCNCJob.py:1839
-#: appObjects/FlatCAMCNCJob.py:1924 appTools/ToolSolderPaste.py:1066
+#: appObjects/FlatCAMCNCJob.py:1654 appObjects/FlatCAMCNCJob.py:1844
+#: appObjects/FlatCAMCNCJob.py:1929 appTools/ToolSolderPaste.py:1066
 msgid "Export cancelled ..."
 msgstr "Exportación cancelada ..."
 
-#: appObjects/FlatCAMCNCJob.py:1673 appObjects/FlatCAMCNCJob.py:1960
+#: appObjects/FlatCAMCNCJob.py:1678 appObjects/FlatCAMCNCJob.py:1965
 #: appObjects/FlatCAMScript.py:134 app_Main.py:7824
 msgid "Loading..."
 msgstr "Cargando..."
 
-#: appObjects/FlatCAMCNCJob.py:1677
+#: appObjects/FlatCAMCNCJob.py:1682
 #, fuzzy
 #| msgid "There is no such parameter"
 msgid "There is nothing to view"
 msgstr "No hay tal parámetro"
 
-#: appObjects/FlatCAMCNCJob.py:1683
+#: appObjects/FlatCAMCNCJob.py:1688
 #, fuzzy
 #| msgid "Gcode Viewer"
 msgid "Code Viewer"
 msgstr "Visor de Gcode"
 
-#: appObjects/FlatCAMCNCJob.py:1721
+#: appObjects/FlatCAMCNCJob.py:1726
 #, fuzzy
 #| msgid "Loaded Machine Code into Code Editor"
 msgid "Loaded Machine Code into Code Viewer"
 msgstr "Código de máquina cargado en el editor de código"
 
-#: appObjects/FlatCAMCNCJob.py:1766
+#: appObjects/FlatCAMCNCJob.py:1771
 #, fuzzy
 #| msgid "Failed to open config file"
 msgid "Failed to open height map file"
 msgstr "Error al abrir el archivo de configuración"
 
-#: appObjects/FlatCAMCNCJob.py:1816
+#: appObjects/FlatCAMCNCJob.py:1821
 msgid "Finished probing. Doing the autolevelling."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1821
+#: appObjects/FlatCAMCNCJob.py:1826
 msgid "Sending probing GCode to the GRBL controller."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1862
+#: appObjects/FlatCAMCNCJob.py:1867
 msgid "Empty GRBL heightmap."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1866
+#: appObjects/FlatCAMCNCJob.py:1871
 #, fuzzy
 #| msgid "Finished G-Code processing..."
 msgid "Finished autolevelling."
 msgstr "Procesamiento de código G terminado ..."
 
-#: appObjects/FlatCAMCNCJob.py:1880
+#: appObjects/FlatCAMCNCJob.py:1885
 msgid "Plotting..."
 msgstr "Trazando ..."
 
-#: appObjects/FlatCAMCNCJob.py:1950
+#: appObjects/FlatCAMCNCJob.py:1955
 msgid "File saved to"
 msgstr "Archivo guardado en"
 
-#: appObjects/FlatCAMCNCJob.py:1974
+#: appObjects/FlatCAMCNCJob.py:1979
 #, fuzzy
 #| msgid "Gcode Viewer"
 msgid "Code Review"
 msgstr "Visor de Gcode"
 
-#: appObjects/FlatCAMCNCJob.py:2157
+#: appObjects/FlatCAMCNCJob.py:2162
 msgid "This CNCJob object can't be processed because it is a"
 msgstr "Este objeto CNCJob no se puede procesar porque es un"
 
-#: appObjects/FlatCAMCNCJob.py:2159
+#: appObjects/FlatCAMCNCJob.py:2164
 msgid "CNCJob object"
 msgstr "Objeto CNCJob"
 
-#: appObjects/FlatCAMCNCJob.py:2269
+#: appObjects/FlatCAMCNCJob.py:2274
 msgid ""
 "G-code does not have a G94 code.\n"
 "Append Code snippet will not be used.."
@@ -13667,7 +13674,7 @@ msgstr "Terminar"
 #: appTools/ToolIsolation.py:531 appTools/ToolIsolation.py:644
 #: appTools/ToolIsolation.py:710 appTools/ToolMilling.py:628
 #: appTools/ToolMilling.py:749 appTools/ToolMilling.py:794
-#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
+#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
 #: appTools/ToolPaint.py:252 appTools/ToolPaint.py:316
 #: appTools/ToolPaint.py:655
 msgid "Multiple Tools"
@@ -13850,7 +13857,7 @@ msgstr "La operación no se pudo hacer."
 
 #: appObjects/FlatCAMGerber.py:558 appObjects/FlatCAMGerber.py:632
 #: appTools/ToolIsolation.py:1583 appTools/ToolIsolation.py:1951
-#: appTools/ToolNCC.py:1854 appTools/ToolNCC.py:2819 appTools/ToolNCC.py:3198
+#: appTools/ToolNCC.py:1856 appTools/ToolNCC.py:2879 appTools/ToolNCC.py:3258
 msgid "Isolation geometry could not be generated."
 msgstr "La geometría de aislamiento no se pudo generar."
 
@@ -14269,7 +14276,7 @@ msgstr ""
 #: appTools/ToolEtchCompensation.py:458 appTools/ToolExtractDrills.py:702
 #: appTools/ToolFiducials.py:932 appTools/ToolFilm.py:1383
 #: appTools/ToolInvertGerber.py:286 appTools/ToolIsolation.py:3477
-#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4328
+#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4388
 #: appTools/ToolOptimal.py:593 appTools/ToolPaint.py:3194
 #: appTools/ToolPanelize.py:889 appTools/ToolPunchGerber.py:993
 #: appTools/ToolQRCode.py:904 appTools/ToolRulesCheck.py:1618
@@ -14285,7 +14292,7 @@ msgstr "Restablecer la Herramienta"
 #: appTools/ToolEtchCompensation.py:461 appTools/ToolExtractDrills.py:705
 #: appTools/ToolFiducials.py:935 appTools/ToolFilm.py:1386
 #: appTools/ToolInvertGerber.py:289 appTools/ToolIsolation.py:3480
-#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4331
+#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4391
 #: appTools/ToolOptimal.py:596 appTools/ToolPaint.py:3197
 #: appTools/ToolPanelize.py:892 appTools/ToolPunchGerber.py:996
 #: appTools/ToolQRCode.py:907 appTools/ToolRulesCheck.py:1621
@@ -14732,8 +14739,8 @@ msgstr "Herramienta Copper Thieving hecha."
 #: appTools/ToolIsolation.py:908 appTools/ToolIsolation.py:1345
 #: appTools/ToolIsolation.py:1372 appTools/ToolMilling.py:424
 #: appTools/ToolMilling.py:639 appTools/ToolMilling.py:1322
-#: appTools/ToolNCC.py:844 appTools/ToolNCC.py:1306 appTools/ToolNCC.py:1355
-#: appTools/ToolNCC.py:1388 appTools/ToolPaint.py:1086
+#: appTools/ToolNCC.py:846 appTools/ToolNCC.py:1308 appTools/ToolNCC.py:1357
+#: appTools/ToolNCC.py:1390 appTools/ToolPaint.py:1086
 #: appTools/ToolPanelize.py:191 appTools/ToolPanelize.py:205
 #: appTools/ToolSub.py:157 appTools/ToolSub.py:170 appTools/ToolSub.py:359
 #: appTools/ToolSub.py:372 tclCommands/TclCommandCopperClear.py:97
@@ -14765,7 +14772,7 @@ msgstr ""
 
 #: appTools/ToolCopperThieving.py:599 appTools/ToolFilm.py:631
 #: appTools/ToolFilm.py:879 appTools/ToolIsolation.py:916
-#: appTools/ToolNCC.py:851 appTools/ToolOptimal.py:145
+#: appTools/ToolNCC.py:853 appTools/ToolOptimal.py:145
 #: appTools/ToolPanelize.py:612 appTools/ToolRulesCheck.py:626
 msgid "Working..."
 msgstr "Trabajando..."
@@ -14774,13 +14781,13 @@ msgstr "Trabajando..."
 msgid "Geometry not supported for bounding box"
 msgstr "Geometría no admitida para cuadro delimitador"
 
-#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1679
-#: appTools/ToolNCC.py:1734 appTools/ToolNCC.py:2674 appTools/ToolPaint.py:2457
+#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1681
+#: appTools/ToolNCC.py:1736 appTools/ToolNCC.py:2734 appTools/ToolPaint.py:2457
 msgid "No object available."
 msgstr "No hay objeto disponible."
 
-#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1704
-#: appTools/ToolNCC.py:1757 appTools/ToolNCC.py:2716
+#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1706
+#: appTools/ToolNCC.py:1759 appTools/ToolNCC.py:2776
 msgid "The reference object type is not supported."
 msgstr "El tipo de objeto de referencia no es compatible."
 
@@ -14839,7 +14846,7 @@ msgstr ""
 "otro objeto."
 
 #: appTools/ToolCopperThieving.py:1231 appTools/ToolIsolation.py:3385
-#: appTools/ToolNCC.py:4257 appTools/ToolPaint.py:3137
+#: appTools/ToolNCC.py:4317 appTools/ToolPaint.py:3137
 msgid "Ref. Type"
 msgstr "Tipo de Ref"
 
@@ -14853,12 +14860,12 @@ msgstr ""
 "Puede ser Gerber, Excellon o Geometry."
 
 #: appTools/ToolCopperThieving.py:1242 appTools/ToolIsolation.py:3396
-#: appTools/ToolNCC.py:4267 appTools/ToolPaint.py:3147
+#: appTools/ToolNCC.py:4327 appTools/ToolPaint.py:3147
 msgid "Ref. Object"
 msgstr "Objeto de Ref"
 
 #: appTools/ToolCopperThieving.py:1244 appTools/ToolIsolation.py:3398
-#: appTools/ToolNCC.py:4269 appTools/ToolPaint.py:3149
+#: appTools/ToolNCC.py:4329 appTools/ToolPaint.py:3149
 msgid "The FlatCAM object to be used as non copper clearing reference."
 msgstr ""
 "El objeto FlatCAM que se utilizará como referencia de compensación sin cobre."
@@ -14992,7 +14999,7 @@ msgstr "Agregará marcadores de esquina al archivo Gerber seleccionado."
 
 #: appTools/ToolCutOut.py:281 appTools/ToolIsolation.py:791
 #: appTools/ToolIsolation.py:1049 appTools/ToolIsolation.py:1185
-#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:990 appTools/ToolNCC.py:1128
+#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:992 appTools/ToolNCC.py:1130
 #: appTools/ToolPaint.py:395 appTools/ToolPaint.py:686
 #: appTools/ToolPaint.py:823 appTools/ToolSolderPaste.py:131
 #: appTools/ToolSolderPaste.py:464 app_Main.py:4490
@@ -15002,7 +15009,7 @@ msgstr ""
 "Float."
 
 #: appTools/ToolCutOut.py:357 appTools/ToolIsolation.py:1130
-#: appTools/ToolNCC.py:1073 appTools/ToolPaint.py:767
+#: appTools/ToolNCC.py:1075 appTools/ToolPaint.py:767
 #, fuzzy
 #| msgid "Tools in Tools Database edited but not saved."
 msgid "Tool not in Tools Database. Adding a default tool."
@@ -15010,7 +15017,7 @@ msgstr ""
 "Herramientas en la base de datos de herramientas editadas pero no guardadas."
 
 #: appTools/ToolCutOut.py:364 appTools/ToolDrilling.py:955
-#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1080
+#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1082
 #: appTools/ToolPaint.py:775
 msgid ""
 "Cancelled.\n"
@@ -15030,7 +15037,7 @@ msgid "Default tool added."
 msgstr "Valores predeterminados"
 
 #: appTools/ToolCutOut.py:466 appTools/ToolIsolation.py:2577
-#: appTools/ToolNCC.py:3649 appTools/ToolPaint.py:2620
+#: appTools/ToolNCC.py:3709 appTools/ToolPaint.py:2620
 msgid "Selected tool can't be used here. Pick another."
 msgstr ""
 
@@ -15081,7 +15088,7 @@ msgstr "Cualquier forma de operación de corte finalizada."
 #: appTools/ToolEtchCompensation.py:158 appTools/ToolInvertGerber.py:105
 #: appTools/ToolIsolation.py:912 appTools/ToolIsolation.py:1349
 #: appTools/ToolIsolation.py:1376 appTools/ToolMilling.py:1326
-#: appTools/ToolNCC.py:848 appTools/ToolNCC.py:1310 appTools/ToolPaint.py:1003
+#: appTools/ToolNCC.py:850 appTools/ToolNCC.py:1312 appTools/ToolPaint.py:1003
 #: appTools/ToolPanelize.py:196 tclCommands/TclCommandBbox.py:71
 #: tclCommands/TclCommandNregions.py:71
 msgid "Object not found"
@@ -15190,7 +15197,7 @@ msgstr ""
 "de objetos que llenarán el cuadro combinado 'Objeto'."
 
 #: appTools/ToolCutOut.py:2074 appTools/ToolIsolation.py:3125
-#: appTools/ToolNCC.py:3939 appTools/ToolPaint.py:2901
+#: appTools/ToolNCC.py:3999 appTools/ToolPaint.py:2901
 msgid ""
 "Add a new tool to the Tool Table\n"
 "with the diameter specified above.\n"
@@ -16461,7 +16468,7 @@ msgstr "Nueva Herram"
 msgid "Adding Tool cancelled"
 msgstr "Añadiendo herramienta cancelada"
 
-#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:879
+#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:881
 #: appTools/ToolOptimal.py:179
 msgid ""
 "The Gerber object has one Polygon as geometry.\n"
@@ -16470,7 +16477,7 @@ msgstr ""
 "El objeto Gerber tiene un Polígono como geometría.\n"
 "No hay distancias entre los elementos de geometría que se encuentran."
 
-#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:924
+#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:926
 #, fuzzy
 #| msgid "tooldia = tool diameter"
 msgid "Optimal tool diameter found"
@@ -16478,7 +16485,7 @@ msgstr "tooldia = diá. de la herramienta"
 
 #: appTools/ToolIsolation.py:1000 appTools/ToolIsolation.py:1508
 #: appTools/ToolIsolation.py:1710 appTools/ToolIsolation.py:1897
-#: appTools/ToolNCC.py:935 appTools/ToolNCC.py:1343 appTools/ToolPaint.py:1031
+#: appTools/ToolNCC.py:937 appTools/ToolNCC.py:1345 appTools/ToolPaint.py:1031
 #: appTools/ToolPaint.py:1744
 #, fuzzy
 #| msgid "Failed. No tool selected in the tool table ..."
@@ -16493,44 +16500,44 @@ msgstr ""
 
 #: appTools/ToolIsolation.py:1057 appTools/ToolIsolation.py:1144
 #: appTools/ToolIsolation.py:1206 appTools/ToolIsolation.py:2626
-#: appTools/ToolNCC.py:999 appTools/ToolNCC.py:1087 appTools/ToolNCC.py:1149
-#: appTools/ToolNCC.py:3698 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
+#: appTools/ToolNCC.py:1001 appTools/ToolNCC.py:1089 appTools/ToolNCC.py:1151
+#: appTools/ToolNCC.py:3758 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
 #: appTools/ToolPaint.py:844 appTools/ToolPaint.py:2676
 #: appTools/ToolSolderPaste.py:488
 msgid "Cancelled. Tool already in Tool Table."
 msgstr "Cancelado. Herramienta ya en la tabla de herramientas."
 
-#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1115
+#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1117
 #: appTools/ToolPaint.py:810
 #, fuzzy
 #| msgid "New tool added to Tool Table."
 msgid "New tool added to Tool Table from Tools Database."
 msgstr "Nueva herramienta agregada a la Tabla de herramientas."
 
-#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1179
+#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1181
 #: appTools/ToolPaint.py:873
 #, fuzzy
 #| msgid "New tool added to Tool Table."
 msgid "Default tool added to Tool Table."
 msgstr "Nueva herramienta agregada a la Tabla de herramientas."
 
-#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1205
+#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1207
 #: appTools/ToolPaint.py:898
 msgid "Tool from Tool Table was edited."
 msgstr "Se editó la herramienta de la tabla de herramientas."
 
-#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1218
+#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1220
 #: appTools/ToolPaint.py:911 appTools/ToolSolderPaste.py:548
 msgid "Cancelled. New diameter value is already in the Tool Table."
 msgstr ""
 "Cancelado. El nuevo valor del diámetro ya está en la Tabla de herramientas."
 
-#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1269
+#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1271
 #: appTools/ToolPaint.py:961
 msgid "Delete failed. Select a tool to delete."
 msgstr "Eliminar falló. Seleccione una herramienta para eliminar."
 
-#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1275
+#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1277
 #: appTools/ToolPaint.py:967
 msgid "Tool(s) deleted from Tool Table."
 msgstr "Herramienta (s) eliminada de la tabla de herramientas."
@@ -16625,12 +16632,12 @@ msgstr "No hay polígono en la selección."
 msgid "Click the end point of the paint area."
 msgstr "Haga clic en el punto final del área de pintura."
 
-#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3662
+#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3722
 #: appTools/ToolPaint.py:2633 app_Main.py:5773 app_Main.py:5783
 msgid "Tool from DB added in Tool Table."
 msgstr "Herramienta de DB agregada en la Tabla de herramientas."
 
-#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3715
+#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3775
 #: appTools/ToolPaint.py:2693
 msgid "New tool added to Tool Table."
 msgstr "Nueva herramienta agregada a la Tabla de herramientas."
@@ -16639,7 +16646,7 @@ msgstr "Nueva herramienta agregada a la Tabla de herramientas."
 msgid "Gerber object for isolation routing."
 msgstr "Objeto Gerber para enrutamiento de aislamiento."
 
-#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3815
+#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3875
 msgid ""
 "Tools pool from which the algorithm\n"
 "will pick the ones used for copper clearing."
@@ -16663,7 +16670,7 @@ msgstr ""
 "en la geometría resultante. Esto es porque con algunas herramientas\n"
 "Esta función no podrá crear geometría de enrutamiento."
 
-#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3839
+#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3899
 msgid ""
 "Tool Diameter. It's value (in current FlatCAM units)\n"
 "is the cut width into the material."
@@ -16671,7 +16678,7 @@ msgstr ""
 "Diámetro de herramienta. Su valor (en unidades actuales de FlatCAM)\n"
 "es el ancho de corte en el material."
 
-#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3843
+#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3903
 msgid ""
 "The Tool Type (TT) can be:\n"
 "- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
@@ -16709,19 +16716,19 @@ msgstr ""
 "seleccionará el Tipo de operación\n"
 "en la geometría resultante como Aislamiento."
 
-#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3923
+#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3983
 #, fuzzy
 #| msgid "Optimal Tool"
 msgid "Optimal"
 msgstr "Herramienta de Óptima"
 
-#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3927
+#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3987
 msgid ""
 "Find a tool diameter that is guaranteed\n"
 "to do a complete isolation."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:3967
+#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:4027
 #: appTools/ToolPaint.py:2929 appTools/ToolSolderPaste.py:1211
 msgid ""
 "Delete a selection of tools in the Tool Table\n"
@@ -16746,7 +16753,7 @@ msgstr ""
 msgid "Object whose area will be removed from isolation geometry."
 msgstr "Objeto cuya área se eliminará de la geometría de aislamiento."
 
-#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4259
+#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4319
 msgid ""
 "The type of FlatCAM object to be used as non copper clearing reference.\n"
 "It can be Gerber, Excellon or Geometry."
@@ -16835,115 +16842,115 @@ msgstr "No hay objetos seleccionados."
 msgid "Error when mouse left click."
 msgstr "Error al hacer clic con el botón izquierdo del mouse."
 
-#: appTools/ToolNCC.py:835
+#: appTools/ToolNCC.py:837
 msgid "NCC Tool. Checking tools for validity."
 msgstr ""
 
-#: appTools/ToolNCC.py:947
+#: appTools/ToolNCC.py:949
 msgid ""
 "Incomplete isolation. None of the selected tools could do a complete "
 "isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:950
+#: appTools/ToolNCC.py:952
 msgid "At least one of the selected tools can do a complete isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:1722 appTools/ToolNCC.py:2646
+#: appTools/ToolNCC.py:1724 appTools/ToolNCC.py:2706
 msgid "NCC Tool. Preparing non-copper polygons."
 msgstr "Herramienta NCC. Preparación de polígonos sin cobre."
 
-#: appTools/ToolNCC.py:1782 appTools/ToolNCC.py:2774
+#: appTools/ToolNCC.py:1784 appTools/ToolNCC.py:2834
 msgid "NCC Tool. Calculate 'empty' area."
 msgstr "Herramienta NCC. Calcule el área 'vacía'."
 
-#: appTools/ToolNCC.py:1793 appTools/ToolNCC.py:1822 appTools/ToolNCC.py:1928
-#: appTools/ToolNCC.py:1941 appTools/ToolNCC.py:2787 appTools/ToolNCC.py:2892
-#: appTools/ToolNCC.py:2907 appTools/ToolNCC.py:3173 appTools/ToolNCC.py:3274
-#: appTools/ToolNCC.py:3289
+#: appTools/ToolNCC.py:1795 appTools/ToolNCC.py:1824 appTools/ToolNCC.py:1930
+#: appTools/ToolNCC.py:1943 appTools/ToolNCC.py:2847 appTools/ToolNCC.py:2952
+#: appTools/ToolNCC.py:2967 appTools/ToolNCC.py:3233 appTools/ToolNCC.py:3334
+#: appTools/ToolNCC.py:3349
 msgid "Buffering finished"
 msgstr "Buffering terminado"
 
-#: appTools/ToolNCC.py:1797 appTools/ToolNCC.py:1826 appTools/ToolNCC.py:1932
-#: appTools/ToolNCC.py:1944 appTools/ToolNCC.py:2795 appTools/ToolNCC.py:2914
-#: appTools/ToolNCC.py:3180 appTools/ToolNCC.py:3296
+#: appTools/ToolNCC.py:1799 appTools/ToolNCC.py:1828 appTools/ToolNCC.py:1934
+#: appTools/ToolNCC.py:1946 appTools/ToolNCC.py:2855 appTools/ToolNCC.py:2974
+#: appTools/ToolNCC.py:3240 appTools/ToolNCC.py:3356
 msgid "Could not get the extent of the area to be non copper cleared."
 msgstr ""
 "No se pudo obtener la extensión del área que no fue limpiada con cobre."
 
-#: appTools/ToolNCC.py:1805 appTools/ToolNCC.py:1955 appTools/ToolNCC.py:2925
+#: appTools/ToolNCC.py:1807 appTools/ToolNCC.py:1957 appTools/ToolNCC.py:2985
 msgid "NCC Tool. Finished calculation of 'empty' area."
 msgstr "Herramienta NCC. Cálculo finalizado del área 'vacía'."
 
-#: appTools/ToolNCC.py:1858 appTools/ToolNCC.py:2822 appTools/ToolNCC.py:2899
-#: appTools/ToolNCC.py:3200 appTools/ToolNCC.py:3281
+#: appTools/ToolNCC.py:1860 appTools/ToolNCC.py:2882 appTools/ToolNCC.py:2959
+#: appTools/ToolNCC.py:3260 appTools/ToolNCC.py:3341
 msgid ""
 "Isolation geometry is broken. Margin is less than isolation tool diameter."
 msgstr ""
 "La geometría de aislamiento está rota. El margen es menor que el diámetro de "
 "la herramienta de aislamiento."
 
-#: appTools/ToolNCC.py:1948 appTools/ToolNCC.py:2918 appTools/ToolNCC.py:3299
+#: appTools/ToolNCC.py:1950 appTools/ToolNCC.py:2978 appTools/ToolNCC.py:3359
 msgid "The selected object is not suitable for copper clearing."
 msgstr "El objeto seleccionado no es adecuado para la limpieza de cobre."
 
-#: appTools/ToolNCC.py:1998
+#: appTools/ToolNCC.py:2000
 msgid "Clearing the polygon with the method: lines."
 msgstr "Borrar el polígono con el método: líneas."
 
-#: appTools/ToolNCC.py:2008
+#: appTools/ToolNCC.py:2010
 msgid "Failed. Clearing the polygon with the method: seed."
 msgstr "Ha fallado. Borrar el polígono con el método: semilla."
 
-#: appTools/ToolNCC.py:2017
+#: appTools/ToolNCC.py:2019
 msgid "Failed. Clearing the polygon with the method: standard."
 msgstr "Ha fallado. Borrar el polígono con el método: estándar."
 
-#: appTools/ToolNCC.py:2033
+#: appTools/ToolNCC.py:2035
 #, fuzzy
 #| msgid "Geometry could not be cleared completely"
 msgid "Polygon could not be cleared. Location:"
 msgstr "La geometría no se pudo borrar por completo"
 
-#: appTools/ToolNCC.py:2065 appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2595
-#: appTools/ToolNCC.py:2597
+#: appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2069 appTools/ToolNCC.py:2655
+#: appTools/ToolNCC.py:2657
 msgid "Non-Copper clearing ..."
 msgstr "Limpieza sin cobre ..."
 
-#: appTools/ToolNCC.py:2086
+#: appTools/ToolNCC.py:2088
 msgid ""
 "There is no copper clearing tool in the selection and at least one is needed."
 msgstr ""
 
-#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2742
+#: appTools/ToolNCC.py:2103 appTools/ToolNCC.py:2802
 msgid ""
 "NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
 msgstr ""
 "Herramienta NCC. Polígonos terminados sin cobre. Se inició la tarea normal "
 "de limpieza de cobre."
 
-#: appTools/ToolNCC.py:2129 appTools/ToolNCC.py:2363
+#: appTools/ToolNCC.py:2131 appTools/ToolNCC.py:2365
 msgid "NCC Tool failed creating bounding box."
 msgstr "La herramienta NCC no pudo crear el cuadro delimitador."
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "NCC Tool clearing with tool diameter"
 msgstr "La Herram. NCC se está limpiando con el diá. de la herramienta"
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "started."
 msgstr "empezado."
 
-#: appTools/ToolNCC.py:2277
+#: appTools/ToolNCC.py:2279
 #, fuzzy
 #| msgid "Could not get the extent of the area to be non copper cleared."
 msgid "Could not use the tool for copper clear."
 msgstr ""
 "No se pudo obtener la extensión del área que no fue limpiada con cobre."
 
-#: appTools/ToolNCC.py:2299 appTools/ToolNCC.py:3099
+#: appTools/ToolNCC.py:2301 appTools/ToolNCC.py:3159
 msgid ""
 "There is no NCC Geometry in the file.\n"
 "Usually it means that the tool diameter is too big for the painted "
@@ -16955,22 +16962,22 @@ msgstr ""
 "grande para la geometría pintada.\n"
 "Cambie los parámetros de pintura e intente nuevamente."
 
-#: appTools/ToolNCC.py:2309 appTools/ToolNCC.py:3108
+#: appTools/ToolNCC.py:2311 appTools/ToolNCC.py:3168
 msgid "NCC Tool clear all done."
 msgstr "Herramienta NCC borrar todo hecho."
 
-#: appTools/ToolNCC.py:2312 appTools/ToolNCC.py:3111
+#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:3171
 msgid "NCC Tool clear all done but the copper features isolation is broken for"
 msgstr ""
 "La herramienta NCC borra todo, pero el aislamiento de las características de "
 "cobre está roto por"
 
-#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:2510 appTools/ToolNCC.py:3113
-#: appTools/ToolNCC.py:3496
+#: appTools/ToolNCC.py:2316 appTools/ToolNCC.py:2570 appTools/ToolNCC.py:3173
+#: appTools/ToolNCC.py:3556
 msgid "tools"
 msgstr "herramientas"
 
-#: appTools/ToolNCC.py:2341
+#: appTools/ToolNCC.py:2343
 #, fuzzy
 #| msgid "Paint Tool. Rest machining painting area task started."
 msgid "NCC Tool. Rest machining copper clearing task started."
@@ -16978,11 +16985,11 @@ msgstr ""
 "Herramienta de pintura. Se inició la tarea de área de pintura de mecanizado "
 "de descanso."
 
-#: appTools/ToolNCC.py:2506 appTools/ToolNCC.py:3492
+#: appTools/ToolNCC.py:2566 appTools/ToolNCC.py:3552
 msgid "NCC Tool Rest Machining clear all done."
 msgstr "NCC herramienta de mecanizado de reposo claro todo hecho."
 
-#: appTools/ToolNCC.py:2509 appTools/ToolNCC.py:3495
+#: appTools/ToolNCC.py:2569 appTools/ToolNCC.py:3555
 msgid ""
 "NCC Tool Rest Machining clear all done but the copper features isolation is "
 "broken for"
@@ -16990,11 +16997,11 @@ msgstr ""
 "El mecanizado de reposo de herramientas NCC está claro, pero el aislamiento "
 "de características de cobre está roto por"
 
-#: appTools/ToolNCC.py:2607
+#: appTools/ToolNCC.py:2667
 msgid "NCC Tool started. Reading parameters."
 msgstr "Herramienta NCC iniciada. Parámetros de lectura."
 
-#: appTools/ToolNCC.py:3594
+#: appTools/ToolNCC.py:3654
 msgid ""
 "Try to use the Buffering Type = Full in Preferences -> Gerber General. "
 "Reload the Gerber file after this change."
@@ -17003,15 +17010,15 @@ msgstr ""
 "Preferencias -> Gerber General. Vuelva a cargar el archivo Gerber después de "
 "este cambio."
 
-#: appTools/ToolNCC.py:3750
+#: appTools/ToolNCC.py:3810
 msgid "Non-Copper Clearing"
 msgstr "Compensación sin cobre"
 
-#: appTools/ToolNCC.py:3779 appTools/ToolPaint.py:2765
+#: appTools/ToolNCC.py:3839 appTools/ToolPaint.py:2765
 msgid "Obj Type"
 msgstr "Tipo de obj"
 
-#: appTools/ToolNCC.py:3781
+#: appTools/ToolNCC.py:3841
 msgid ""
 "Specify the type of object to be cleared of excess copper.\n"
 "It can be of type: Gerber or Geometry.\n"
@@ -17023,11 +17030,11 @@ msgstr ""
 "Lo que se seleccione aquí dictará el tipo\n"
 "de objetos que llenarán el cuadro combinado 'Objeto'."
 
-#: appTools/ToolNCC.py:3803
+#: appTools/ToolNCC.py:3863
 msgid "Object to be cleared of excess copper."
 msgstr "Objeto a eliminar del exceso de cobre."
 
-#: appTools/ToolNCC.py:3831
+#: appTools/ToolNCC.py:3891
 msgid ""
 "This is the Tool Number.\n"
 "Non copper clearing will start with the tool with the biggest \n"
@@ -18155,6 +18162,12 @@ msgstr "Borrar el texto,"
 msgid "...processing..."
 msgstr "…procesando..."
 
+#: appTools/ToolShell.py:293
+#, fuzzy
+#| msgid "FlatCAM Beta"
+msgid "FlatCAM Shell"
+msgstr "FlatCAM Beta"
+
 #: appTools/ToolSolderPaste.py:459
 msgid "Please enter a tool diameter to add, in Float format."
 msgstr "Ingrese un diámetro de herramienta para agregar, en formato decimal."
@@ -18759,6 +18772,10 @@ msgstr ""
 "MultiGeo no es posible.\n"
 "Edite solo una geometría a la vez."
 
+#: app_Main.py:2261
+msgid "EDITOR Area"
+msgstr ""
+
 #: app_Main.py:2263
 msgid "Editor is activated ..."
 msgstr "Editor está activado ..."
diff --git a/locale/fr/LC_MESSAGES/strings.mo b/locale/fr/LC_MESSAGES/strings.mo
index 60b9d5ce..4c97ebde 100644
Binary files a/locale/fr/LC_MESSAGES/strings.mo and b/locale/fr/LC_MESSAGES/strings.mo differ
diff --git a/locale/fr/LC_MESSAGES/strings.po b/locale/fr/LC_MESSAGES/strings.po
index f5e3ac4d..b9f84c97 100644
--- a/locale/fr/LC_MESSAGES/strings.po
+++ b/locale/fr/LC_MESSAGES/strings.po
@@ -6,8 +6,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
-"POT-Creation-Date: 2020-10-22 15:07+0300\n"
-"PO-Revision-Date: 2020-10-22 15:07+0300\n"
+"POT-Creation-Date: 2020-10-22 22:02+0300\n"
+"PO-Revision-Date: 2020-10-22 22:02+0300\n"
 "Last-Translator: \n"
 "Language-Team: \n"
 "Language: fr\n"
@@ -109,7 +109,7 @@ msgstr "Internet"
 #: appDatabase.py:2998 appDatabase.py:3044 appEditors/AppExcEditor.py:1023
 #: appEditors/AppExcEditor.py:1091 appEditors/AppTextEditor.py:263
 #: appGUI/MainGUI.py:2878 appGUI/MainGUI.py:3100 appGUI/MainGUI.py:3315
-#: appObjects/FlatCAMCNCJob.py:1745 appObjects/ObjectCollection.py:126
+#: appObjects/FlatCAMCNCJob.py:1750 appObjects/ObjectCollection.py:126
 #: appTools/ToolFilm.py:238 appTools/ToolFilm.py:384 appTools/ToolImage.py:112
 #: appTools/ToolMove.py:269 appTools/ToolPcbWizard.py:189
 #: appTools/ToolPcbWizard.py:212 appTools/ToolQRCode.py:526
@@ -125,8 +125,8 @@ msgid "Cancelled."
 msgstr "Annulé."
 
 #: Bookmark.py:308 appDatabase.py:673 appDatabase.py:3006
-#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1667
-#: appObjects/FlatCAMCNCJob.py:1857 appObjects/FlatCAMCNCJob.py:2306
+#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1672
+#: appObjects/FlatCAMCNCJob.py:1862 appObjects/FlatCAMCNCJob.py:2311
 #: appTools/ToolFilm.py:582 appTools/ToolFilm.py:830
 #: appTools/ToolSolderPaste.py:1097 app_Main.py:2666 app_Main.py:8451
 #: app_Main.py:8499 app_Main.py:8628 app_Main.py:8765 app_Main.py:8833
@@ -162,18 +162,18 @@ msgid "The user requested a graceful exit of the current task."
 msgstr "L'utilisateur a demandé une sortie de la tâche en cours."
 
 #: appCommon/Common.py:292 appTools/ToolCopperThieving.py:328
-#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1364
+#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1366
 msgid "Click the start point of the area."
 msgstr "Cliquez sur le point de départ de la zone."
 
-#: appCommon/Common.py:351 appTools/ToolNCC.py:1423 appTools/ToolPaint.py:1210
+#: appCommon/Common.py:351 appTools/ToolNCC.py:1425 appTools/ToolPaint.py:1210
 msgid "Click the end point of the area."
 msgstr "Cliquez sur le point final de la zone."
 
 #: appCommon/Common.py:357 appCommon/Common.py:459
 #: appTools/ToolCopperThieving.py:385 appTools/ToolIsolation.py:2348
-#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1429
-#: appTools/ToolNCC.py:1481 appTools/ToolPaint.py:1216
+#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1431
+#: appTools/ToolNCC.py:1483 appTools/ToolPaint.py:1216
 #: appTools/ToolPaint.py:1267
 msgid "Zone added. Click to start adding next zone or right click to finish."
 msgstr ""
@@ -181,7 +181,7 @@ msgstr ""
 "clic droit pour terminer."
 
 #: appCommon/Common.py:404 appEditors/AppGeoEditor.py:2352
-#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1452
+#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1454
 #: appTools/ToolPaint.py:1238
 msgid "Click on next Point or click right mouse button to complete ..."
 msgstr ""
@@ -291,7 +291,7 @@ msgstr "Nom de l'outil"
 #: appGUI/ObjectUI.py:1082 appGUI/ObjectUI.py:1650
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:130
 #: appTools/ToolCutOut.py:2060 appTools/ToolIsolation.py:3091
-#: appTools/ToolNCC.py:3906 appTools/ToolNCC.py:3917 appTools/ToolPaint.py:2882
+#: appTools/ToolNCC.py:3966 appTools/ToolNCC.py:3977 appTools/ToolPaint.py:2882
 msgid "Tool Dia"
 msgstr "Diam. de l'outil"
 
@@ -712,13 +712,13 @@ msgstr ""
 #: appDatabase.py:307 appDatabase.py:684 appDatabase.py:718 appDatabase.py:2647
 #: appDatabase.py:3017 appDatabase.py:3051 appTools/ToolCutOut.py:294
 #: appTools/ToolDrilling.py:895 appTools/ToolIsolation.py:1067
-#: appTools/ToolNCC.py:1009 appTools/ToolPaint.py:704
+#: appTools/ToolNCC.py:1011 appTools/ToolPaint.py:704
 msgid "Could not load Tools DB file."
 msgstr "Impossible de charger le fichier BD des outils."
 
 #: appDatabase.py:315 appDatabase.py:726 appDatabase.py:2655
 #: appDatabase.py:3059 appTools/ToolCutOut.py:305 appTools/ToolDrilling.py:903
-#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1020
+#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1022
 #: appTools/ToolPaint.py:715
 msgid "Failed to parse Tools DB file."
 msgstr "Échec de l'analyse du fichier BD des outils."
@@ -777,7 +777,7 @@ msgstr "Importer la BD des outils FlatCAM"
 #: appDatabase.py:3464 appObjects/FlatCAMGeometry.py:1089
 #: appTools/ToolCutOut.py:484 appTools/ToolCutOut.py:525
 #: appTools/ToolIsolation.py:2583 appTools/ToolIsolation.py:2667
-#: appTools/ToolNCC.py:3655 appTools/ToolNCC.py:3735 appTools/ToolPaint.py:2626
+#: appTools/ToolNCC.py:3715 appTools/ToolNCC.py:3795 appTools/ToolPaint.py:2626
 #: appTools/ToolPaint.py:2715 app_Main.py:5676 app_Main.py:5718
 #: app_Main.py:5749 app_Main.py:5769 app_Main.py:5779
 msgid "Tools Database"
@@ -833,7 +833,7 @@ msgstr "Paramètres de Fente"
 
 #: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
 #: appGUI/ObjectUI.py:570 appGUI/ObjectUI.py:894 appGUI/ObjectUI.py:1876
-#: appGUI/ObjectUI.py:2681 appGUI/ObjectUI.py:2748
+#: appGUI/ObjectUI.py:2693 appGUI/ObjectUI.py:2760
 #: appTools/ToolCalibration.py:929 appTools/ToolFiducials.py:681
 msgid "Name"
 msgstr "Nom"
@@ -846,7 +846,7 @@ msgstr "Nom"
 #: appTools/ToolDrilling.py:2065 appTools/ToolIsolation.py:3022
 #: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
 #: appTools/ToolMilling.py:1360 appTools/ToolMilling.py:1670
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 #: appTools/ToolPcbWizard.py:404 appTools/ToolProperties.py:417
 #: appTools/ToolProperties.py:480 appTools/ToolSolderPaste.py:1166
 #: tclCommands/TclCommandDrillcncjob.py:195
@@ -885,7 +885,7 @@ msgstr ""
 
 #: appDatabase.py:1186 appDatabase.py:1504
 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46
-#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:3990
+#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:4050
 msgid "Operation"
 msgstr "Opération"
 
@@ -912,7 +912,7 @@ msgstr "Forage"
 
 #: appDatabase.py:1192 appDatabase.py:1514 appDatabase.py:2761
 #: appDatabase.py:3095 appTools/ToolIsolation.py:1101
-#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4000
+#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4060
 msgid "Isolation"
 msgstr "Isolé"
 
@@ -923,7 +923,7 @@ msgid "Paint"
 msgstr "Peindre"
 
 #: appDatabase.py:1192 appDatabase.py:2773 appDatabase.py:3111
-#: appTools/ToolNCC.py:1044 appTools/ToolNCC.py:3648
+#: appTools/ToolNCC.py:1046 appTools/ToolNCC.py:3708
 #, fuzzy
 #| msgid "CCW"
 msgid "NCC"
@@ -942,7 +942,7 @@ msgstr "Découpe de PCB"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:303
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:284
-#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4283
+#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4343
 #: appTools/ToolPaint.py:3163
 msgid "Shape"
 msgstr "Forme"
@@ -979,7 +979,7 @@ msgstr ""
 "Monter/Descente \n"
 "La vitesse sur l'axe Z."
 
-#: appDatabase.py:1506 appTools/ToolNCC.py:3992
+#: appDatabase.py:1506 appTools/ToolNCC.py:4052
 msgid ""
 "The 'Operation' can be:\n"
 "- Isolation -> will ensure that the non-copper clearing is always complete.\n"
@@ -993,7 +993,7 @@ msgstr ""
 "- Nettoyer -> le clearing régulier sans cuivre."
 
 #: appDatabase.py:1513 appEditors/AppGerberEditor.py:2749
-#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:3999
+#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:4059
 msgid "Clear"
 msgstr "Nettoyer"
 
@@ -1003,7 +1003,7 @@ msgstr "Nettoyer"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137
 #: appTools/ToolIsolation.py:3204 appTools/ToolMilling.py:1760
-#: appTools/ToolNCC.py:4008
+#: appTools/ToolNCC.py:4068
 msgid "Milling Type"
 msgstr "Type de fraisage"
 
@@ -1013,7 +1013,7 @@ msgstr "Type de fraisage"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147
 #: appTools/ToolIsolation.py:3206 appTools/ToolIsolation.py:3214
-#: appTools/ToolNCC.py:4010 appTools/ToolNCC.py:4018
+#: appTools/ToolNCC.py:4070 appTools/ToolNCC.py:4078
 msgid ""
 "Milling type when the selected tool is of type: 'iso_op':\n"
 "- climb / best for precision milling and to reduce tool usage\n"
@@ -1028,7 +1028,7 @@ msgstr ""
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144
-#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4015
+#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4075
 msgid "Climb"
 msgstr "Monté"
 
@@ -1036,7 +1036,7 @@ msgstr "Monté"
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:190
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145
-#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4016
+#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4076
 msgid "Conventional"
 msgstr "Conventionnel"
 
@@ -1047,12 +1047,12 @@ msgstr "Conventionnel"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:161
 #: appTools/ToolDrilling.py:2312 appTools/ToolIsolation.py:3189
-#: appTools/ToolNCC.py:4031 appTools/ToolPaint.py:2955
+#: appTools/ToolNCC.py:4091 appTools/ToolPaint.py:2955
 msgid "Overlap"
 msgstr "Chevauchement"
 
 #: appDatabase.py:1544 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
-#: appTools/ToolNCC.py:4033
+#: appTools/ToolNCC.py:4093
 msgid ""
 "How much (percentage) of the tool width to overlap each tool pass.\n"
 "Adjust the value starting with lower values\n"
@@ -1084,8 +1084,8 @@ msgstr ""
 #: appTools/ToolCopperThieving.py:1204 appTools/ToolCopperThieving.py:1455
 #: appTools/ToolCorners.py:411 appTools/ToolCutOut.py:2157
 #: appTools/ToolFiducials.py:786 appTools/ToolInvertGerber.py:234
-#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4075
-#: appTools/ToolNCC.py:4178
+#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4135
+#: appTools/ToolNCC.py:4238
 msgid "Margin"
 msgstr "Marge"
 
@@ -1096,25 +1096,25 @@ msgstr "Marge"
 #: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204
 #: appTools/ToolCopperThieving.py:1206 appTools/ToolCorners.py:413
-#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4077
-#: appTools/ToolNCC.py:4180
+#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4137
+#: appTools/ToolNCC.py:4240
 msgid "Bounding box margin."
 msgstr "Marge du cadre de sélection."
 
 #: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
-#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2172
+#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2184
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
 #: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:196
-#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4052
+#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4112
 #: appTools/ToolPaint.py:2991 appTools/ToolPunchGerber.py:793
 msgid "Method"
 msgstr "Méthode"
 
 #: appDatabase.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
-#: appTools/ToolNCC.py:4054
+#: appTools/ToolNCC.py:4114
 msgid ""
 "Algorithm for copper clearing:\n"
 "- Standard: Fixed step inwards.\n"
@@ -1129,7 +1129,7 @@ msgstr ""
 #: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1963 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1456
+#: appTools/ToolNCC.py:1965 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1456
 #: appTools/ToolPaint.py:3016 defaults.py:346
 #: tclCommands/TclCommandCopperClear.py:126
 #: tclCommands/TclCommandCopperClear.py:134 tclCommands/TclCommandPaint.py:125
@@ -1140,7 +1140,7 @@ msgstr "Standard"
 #: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1974 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1470
+#: appTools/ToolNCC.py:1976 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1470
 #: appTools/ToolPaint.py:3016 defaults.py:469 defaults.py:507
 #: tclCommands/TclCommandCopperClear.py:128
 #: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
@@ -1151,7 +1151,7 @@ msgstr "La graine"
 #: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1702
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1985 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:160
+#: appTools/ToolNCC.py:1987 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:160
 #: appTools/ToolPaint.py:1484 appTools/ToolPaint.py:3016
 #: tclCommands/TclCommandCopperClear.py:130 tclCommands/TclCommandPaint.py:129
 msgid "Lines"
@@ -1160,24 +1160,24 @@ msgstr "Lignes"
 #: appDatabase.py:1586 appDatabase.py:1701
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1996 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1649
+#: appTools/ToolNCC.py:1998 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1649
 #: appTools/ToolPaint.py:3016 tclCommands/TclCommandPaint.py:133
 msgid "Combo"
 msgstr "Combo"
 
 #: appDatabase.py:1594 appDatabase.py:1712 appEditors/AppGeoEditor.py:505
-#: appGUI/ObjectUI.py:2257 appGUI/ObjectUI.py:2280
+#: appGUI/ObjectUI.py:2269 appGUI/ObjectUI.py:2292
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:222
-#: appObjects/FlatCAMCNCJob.py:1300 appObjects/FlatCAMCNCJob.py:1322
-#: appTools/ToolNCC.py:4088 appTools/ToolNCC.py:4191 appTools/ToolPaint.py:3027
+#: appObjects/FlatCAMCNCJob.py:1305 appObjects/FlatCAMCNCJob.py:1327
+#: appTools/ToolNCC.py:4148 appTools/ToolNCC.py:4251 appTools/ToolPaint.py:3027
 msgid "Connect"
 msgstr "Relier"
 
 #: appDatabase.py:1598 appDatabase.py:1715 appEditors/AppGeoEditor.py:507
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
-#: appTools/ToolNCC.py:4092 appTools/ToolNCC.py:4193 appTools/ToolPaint.py:3030
+#: appTools/ToolNCC.py:4152 appTools/ToolNCC.py:4253 appTools/ToolPaint.py:3030
 msgid ""
 "Draw lines between resulting\n"
 "segments to minimize tool lifts."
@@ -1188,14 +1188,14 @@ msgstr ""
 #: appDatabase.py:1604 appDatabase.py:1719 appEditors/AppGeoEditor.py:515
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:230
-#: appTools/ToolNCC.py:4098 appTools/ToolNCC.py:4199 appTools/ToolPaint.py:3034
+#: appTools/ToolNCC.py:4158 appTools/ToolNCC.py:4259 appTools/ToolPaint.py:3034
 msgid "Contour"
 msgstr "Contour"
 
 #: appDatabase.py:1608 appDatabase.py:1722 appEditors/AppGeoEditor.py:517
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232
-#: appTools/ToolNCC.py:4102 appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3037
+#: appTools/ToolNCC.py:4162 appTools/ToolNCC.py:4261 appTools/ToolPaint.py:3037
 msgid ""
 "Cut around the perimeter of the polygon\n"
 "to trim rough edges."
@@ -1209,13 +1209,13 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
 #: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
-#: appTools/ToolNCC.py:4108 appTools/ToolNCC.py:4207 appTools/ToolPaint.py:2976
+#: appTools/ToolNCC.py:4168 appTools/ToolNCC.py:4267 appTools/ToolPaint.py:2976
 #: appTools/ToolPaint.py:3083 appTools/ToolTransform.py:517
 msgid "Offset"
 msgstr "Décalage"
 
 #: appDatabase.py:1618 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
-#: appTools/ToolNCC.py:4112 appTools/ToolNCC.py:4209
+#: appTools/ToolNCC.py:4172 appTools/ToolNCC.py:4269
 msgid ""
 "If used, it will add an offset to the copper features.\n"
 "The copper clearing will finish to a distance\n"
@@ -1710,7 +1710,7 @@ msgstr ""
 #: appTools/ToolInvertGerber.py:304 appTools/ToolInvertGerber.py:315
 #: appTools/ToolIsolation.py:3494 appTools/ToolIsolation.py:3505
 #: appTools/ToolMilling.py:2341 appTools/ToolMilling.py:2352
-#: appTools/ToolNCC.py:4448 appTools/ToolNCC.py:4459
+#: appTools/ToolNCC.py:4508 appTools/ToolNCC.py:4519
 #: appTools/ToolOptimal.py:614 appTools/ToolOptimal.py:625
 #: appTools/ToolPaint.py:3267 appTools/ToolPaint.py:3278
 #: appTools/ToolPanelize.py:914 appTools/ToolPanelize.py:925
@@ -1746,7 +1746,7 @@ msgstr "La valeur modifiée est hors limites"
 #: appTools/ToolInvertGerber.py:310 appTools/ToolInvertGerber.py:317
 #: appTools/ToolIsolation.py:3500 appTools/ToolIsolation.py:3507
 #: appTools/ToolMilling.py:2347 appTools/ToolMilling.py:2354
-#: appTools/ToolNCC.py:4454 appTools/ToolNCC.py:4461
+#: appTools/ToolNCC.py:4514 appTools/ToolNCC.py:4521
 #: appTools/ToolOptimal.py:620 appTools/ToolOptimal.py:627
 #: appTools/ToolPaint.py:3273 appTools/ToolPaint.py:3280
 #: appTools/ToolPanelize.py:920 appTools/ToolPanelize.py:927
@@ -1908,8 +1908,8 @@ msgstr "Total de Fentes"
 #: appEditors/AppExcEditor.py:2003 appObjects/FlatCAMGeometry.py:706
 #: appObjects/FlatCAMGeometry.py:1232 appObjects/FlatCAMGeometry.py:1974
 #: appObjects/FlatCAMGeometry.py:2633 appTools/ToolIsolation.py:1252
-#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1195
-#: appTools/ToolNCC.py:1332 appTools/ToolPaint.py:889
+#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1197
+#: appTools/ToolNCC.py:1334 appTools/ToolPaint.py:889
 #: appTools/ToolPaint.py:1027 appTools/ToolPaint.py:1740
 #: appTools/ToolSolderPaste.py:455 appTools/ToolSolderPaste.py:527
 msgid "Wrong value format entered, use a number."
@@ -1993,7 +1993,7 @@ msgstr "Nom:"
 
 #: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:620
 #: appGUI/ObjectUI.py:967 appTools/ToolIsolation.py:3010
-#: appTools/ToolNCC.py:3813 appTools/ToolPaint.py:2800
+#: appTools/ToolNCC.py:3873 appTools/ToolPaint.py:2800
 #: appTools/ToolSolderPaste.py:1155
 msgid "Tools Table"
 msgstr "Tableau des outils"
@@ -2030,7 +2030,7 @@ msgstr ""
 
 #: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1084
 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
-#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3908
+#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3968
 msgid "Diameter for the new tool"
 msgstr "Diamètre pour le nouvel outil"
 
@@ -2404,7 +2404,7 @@ msgstr "Rond"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:289
 #: appTools/ToolDrilling.py:2588 appTools/ToolExtractDrills.py:486
 #: appTools/ToolExtractDrills.py:619 appTools/ToolIsolation.py:3430
-#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4288
+#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4348
 #: appTools/ToolPaint.py:3168 appTools/ToolPunchGerber.py:759
 #: appTools/ToolPunchGerber.py:909 appTools/ToolQRCode.py:788
 msgid "Square"
@@ -2451,6 +2451,17 @@ msgstr "Outil Texte"
 msgid "Font"
 msgstr "Police"
 
+#: appEditors/AppGeoEditor.py:313 appEditors/AppGerberEditor.py:2495
+#: appEditors/AppGerberEditor.py:3968 appGUI/ObjectUI.py:316
+#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
+#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
+#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
+#: appTools/ToolFiducials.py:770
+msgid "Size"
+msgstr "Taille"
+
 #: appEditors/AppGeoEditor.py:322 appGUI/MainGUI.py:1502
 msgid "Text"
 msgstr "Texte"
@@ -2470,7 +2481,7 @@ msgstr "Outil Texte"
 #: appTools/ToolIsolation.py:697 appTools/ToolIsolation.py:3166
 #: appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
 #: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:329
-#: appTools/ToolNCC.py:2278 appTools/ToolNCC.py:3980 appTools/ToolPaint.py:304
+#: appTools/ToolNCC.py:2280 appTools/ToolNCC.py:4040 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:2940
 msgid "Tool"
 msgstr "Outil"
@@ -2598,7 +2609,7 @@ msgstr "Origine"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:256
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
-#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4244
+#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4304
 #: appTools/ToolPaint.py:3097 appTools/ToolTransform.py:557 defaults.py:566
 msgid "Selection"
 msgstr "Sélection"
@@ -2634,7 +2645,7 @@ msgid "A point of reference in format X,Y."
 msgstr "Un point de référence au format X, Y."
 
 #: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
-#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2338
+#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2350
 #: appTools/ToolDblSided.py:706 appTools/ToolDblSided.py:892
 #: appTools/ToolNCC.py:63 appTools/ToolPaint.py:137
 #: appTools/ToolSolderPaste.py:160 appTools/ToolSolderPaste.py:1203
@@ -2938,7 +2949,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70
 #: appTools/ToolCalibration.py:881 appTools/ToolDrilling.py:2540
 #: appTools/ToolFilm.py:931 appTools/ToolMilling.py:2218
-#: appTools/ToolNCC.py:3802 appTools/ToolPaint.py:2788
+#: appTools/ToolNCC.py:3862 appTools/ToolPaint.py:2788
 #: appTools/ToolPanelize.py:697 appTools/ToolTransform.py:557
 msgid "Object"
 msgstr "Objet"
@@ -3356,7 +3367,7 @@ msgstr "Ligne"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290
 #: appTools/ToolDrilling.py:2589 appTools/ToolIsolation.py:3431
-#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4289
+#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4349
 #: appTools/ToolPaint.py:3169
 msgid "Polygon"
 msgstr "Polygone"
@@ -3391,7 +3402,7 @@ msgstr "Cliquez sur le point cible."
 msgid "Editing MultiGeo Geometry, tool"
 msgstr "Modification de la géométrie MultiGeo, outil"
 
-#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2280
+#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2282
 msgid "with diameter"
 msgstr "avec diamètre"
 
@@ -3622,17 +3633,6 @@ msgstr "Tableau des Ouvertures pour l'objet Gerber."
 msgid "Code"
 msgstr "Code"
 
-#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:316
-#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
-#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
-#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
-#: appTools/ToolFiducials.py:770
-msgid "Size"
-msgstr "Taille"
-
 #: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
 #: appGUI/ObjectUI.py:316
 msgid "Dim"
@@ -3735,7 +3735,7 @@ msgstr "Ajoutez une nouvelle ouverture à la liste des ouvertures."
 #: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1132
 #: appObjects/FlatCAMGeometry.py:560 appTools/ToolIsolation.py:70
 #: appTools/ToolIsolation.py:3150 appTools/ToolNCC.py:69
-#: appTools/ToolNCC.py:3964 appTools/ToolPaint.py:143
+#: appTools/ToolNCC.py:4024 appTools/ToolPaint.py:143
 #: appTools/ToolPaint.py:2926 appTools/ToolSolderPaste.py:163
 #: appTools/ToolSolderPaste.py:1209 app_Main.py:6123
 msgid "Delete"
@@ -4163,20 +4163,20 @@ msgid "Open file"
 msgstr "Fichier ouvert"
 
 #: appEditors/AppTextEditor.py:255 appEditors/AppTextEditor.py:260
-#: appObjects/FlatCAMCNCJob.py:1641 appObjects/FlatCAMCNCJob.py:1646
-#: appObjects/FlatCAMCNCJob.py:1831 appObjects/FlatCAMCNCJob.py:1836
-#: appObjects/FlatCAMCNCJob.py:1909 appObjects/FlatCAMCNCJob.py:1914
+#: appObjects/FlatCAMCNCJob.py:1646 appObjects/FlatCAMCNCJob.py:1651
+#: appObjects/FlatCAMCNCJob.py:1836 appObjects/FlatCAMCNCJob.py:1841
+#: appObjects/FlatCAMCNCJob.py:1914 appObjects/FlatCAMCNCJob.py:1919
 #: appTools/ToolSolderPaste.py:1063 app_Main.py:7038 app_Main.py:7043
 msgid "Export Code ..."
 msgstr "Exporter le code ..."
 
-#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1663
-#: appObjects/FlatCAMCNCJob.py:1853 appObjects/FlatCAMCNCJob.py:2302
+#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1668
+#: appObjects/FlatCAMCNCJob.py:1858 appObjects/FlatCAMCNCJob.py:2307
 #: appTools/ToolSolderPaste.py:1093
 msgid "No such file or directory"
 msgstr "Aucun fichier ou répertoire de ce nom"
 
-#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2316
+#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2321
 msgid "Saved to"
 msgstr "Enregistré dans"
 
@@ -4208,7 +4208,7 @@ msgstr "Enregistrer le GCode"
 msgid "Start GCode"
 msgstr "Démarrer le GCode"
 
-#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2007
+#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2012
 #: appTools/ToolCalibration.py:447
 msgid "Loaded Machine Code into Code Editor"
 msgstr "Code machine chargé dans l'éditeur de code"
@@ -4228,7 +4228,7 @@ msgstr "Diam"
 
 #: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:999
 #: appGUI/ObjectUI.py:2009 appTools/ToolIsolation.py:3022
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 msgid "TT"
 msgstr "TT"
 
@@ -5291,9 +5291,9 @@ msgstr "Dézoomer"
 msgid "Zoom Fit"
 msgstr "Ajustement du Zoom"
 
-#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:2067
-msgid "&Command Line"
-msgstr "&Ligne de commande"
+#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:1154
+msgid "Command Line"
+msgstr "Ligne de commande"
 
 #: appGUI/MainGUI.py:924 appGUI/MainGUI.py:2079
 msgid "2Sided Tool"
@@ -5587,10 +5587,6 @@ msgstr "Basculer l'affichage de l'axe sur le canevas"
 msgid "Preferences"
 msgstr "Préférences"
 
-#: appGUI/MainGUI.py:1154
-msgid "Command Line"
-msgstr "Ligne de commande"
-
 #: appGUI/MainGUI.py:1160
 msgid "HUD (Heads up display)"
 msgstr "HUD (Affichage tête haute)"
@@ -5619,11 +5615,18 @@ msgstr ""
 "Mesure absolue.\n"
 "La référence est (X = 0, Y = 0) position"
 
+#: appGUI/MainGUI.py:1194
+#, fuzzy
+#| msgid "Show Shell"
+msgid "TCL Shell"
+msgstr "Afficher la ligne de commande"
+
 #: appGUI/MainGUI.py:1221 appGUI/MainGUI.py:1470 app_Main.py:8143
 msgid "Project"
 msgstr "Projet"
 
-#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272
+#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272 appGUI/MainGUI.py:3791
+#: appGUI/MainGUI.py:3797
 msgid "Plot Area"
 msgstr "Zone de Dessin"
 
@@ -5717,7 +5720,7 @@ msgstr ""
 msgid "Toggle Visibility"
 msgstr "Basculer la Visibilité"
 
-#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2330
+#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2342
 msgid "New"
 msgstr "Nouveau"
 
@@ -5730,8 +5733,8 @@ msgstr "Nouveau"
 #: appTools/ToolDblSided.py:767 appTools/ToolFilm.py:929
 #: appTools/ToolFilm.py:952 appTools/ToolImage.py:136 appTools/ToolImage.py:191
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3338
-#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:803
-#: appTools/ToolNCC.py:3788 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:805
+#: appTools/ToolNCC.py:3848 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:587
@@ -5749,7 +5752,7 @@ msgstr "Géométrie"
 #: appTools/ToolDblSided.py:527 appTools/ToolDblSided.py:724
 #: appTools/ToolDblSided.py:766 appTools/ToolFilm.py:1207
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPunchGerber.py:803 appTools/ToolPunchGerber.py:818
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:586
@@ -5866,12 +5869,16 @@ msgstr "Oui"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:148
 #: appTools/ToolDrilling.py:2090 appTools/ToolIsolation.py:3066
-#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3875
+#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3935
 #: appTools/ToolPaint.py:2851 appTranslation.py:113 appTranslation.py:215
 #: app_Main.py:2290 app_Main.py:3385 app_Main.py:5810 app_Main.py:6894
 msgid "No"
 msgstr "Non"
 
+#: appGUI/MainGUI.py:2067
+msgid "&Command Line"
+msgstr "&Ligne de commande"
+
 #: appGUI/MainGUI.py:2086
 msgid "&Cutout Tool"
 msgstr "Outil de Découpe"
@@ -6609,7 +6616,7 @@ msgstr ""
 "Créez un objet Geometry avec\n"
 "parcours d'outils pour couper autour des polygones."
 
-#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4315
+#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4375
 msgid ""
 "Create the Geometry Object\n"
 "for non-copper routing."
@@ -6679,7 +6686,7 @@ msgstr "La géométrie résultante aura des coins arrondis."
 
 #: appGUI/ObjectUI.py:467 appGUI/ObjectUI.py:507 appTools/ToolCutOut.py:2287
 #: appTools/ToolCutOut.py:2302 appTools/ToolIsolation.py:3444
-#: appTools/ToolNCC.py:4312 appTools/ToolPaint.py:3178
+#: appTools/ToolNCC.py:4372 appTools/ToolPaint.py:3178
 msgid "Generate Geometry"
 msgstr "Générer de la Géométrie"
 
@@ -7044,14 +7051,14 @@ msgstr ""
 "coupé et négatif pour «à l'intérieur» coupé."
 
 #: appGUI/ObjectUI.py:1079 appTools/ToolIsolation.py:3087
-#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3902 appTools/ToolPaint.py:140
+#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3962 appTools/ToolPaint.py:140
 #: appTools/ToolPaint.py:2878
 msgid "Add from DB"
 msgstr "Ajouter depuis la BD"
 
 #: appGUI/ObjectUI.py:1096 appTools/ToolCutOut.py:2071
 #: appTools/ToolIsolation.py:61 appTools/ToolIsolation.py:3122
-#: appTools/ToolNCC.py:3936 appTools/ToolPaint.py:2898
+#: appTools/ToolNCC.py:3996 appTools/ToolPaint.py:2898
 msgid "Search and Add"
 msgstr ""
 
@@ -7065,14 +7072,14 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1103 appTools/ToolCutOut.py:2083
 #: appTools/ToolIsolation.py:65 appTools/ToolIsolation.py:3133
-#: appTools/ToolNCC.py:3947 appTools/ToolPaint.py:2909
+#: appTools/ToolNCC.py:4007 appTools/ToolPaint.py:2909
 #, fuzzy
 #| msgid "Add from DB"
 msgid "Pick from DB"
 msgstr "Ajouter depuis la BD"
 
 #: appGUI/ObjectUI.py:1106 appTools/ToolCutOut.py:2086
-#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:3950
+#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:4010
 #: appTools/ToolPaint.py:2912
 #, fuzzy
 #| msgid ""
@@ -7119,8 +7126,8 @@ msgstr ""
 #: appTools/ToolMilling.py:779 appTools/ToolMilling.py:790
 #: appTools/ToolMilling.py:794 appTools/ToolMilling.py:1711
 #: appTools/ToolNCC.py:271 appTools/ToolNCC.py:276 appTools/ToolNCC.py:306
-#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
-#: appTools/ToolNCC.py:3980 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
+#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
+#: appTools/ToolNCC.py:4040 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
 #: appTools/ToolPaint.py:282 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:316 appTools/ToolPaint.py:655
 #: appTools/ToolPaint.py:2940
@@ -7129,7 +7136,7 @@ msgstr "Paramètres pour"
 
 #: appGUI/ObjectUI.py:1175 appTools/ToolDrilling.py:2119
 #: appTools/ToolIsolation.py:3169 appTools/ToolMilling.py:1714
-#: appTools/ToolNCC.py:3983 appTools/ToolPaint.py:2943
+#: appTools/ToolNCC.py:4043 appTools/ToolPaint.py:2943
 msgid ""
 "The data used for creating GCode.\n"
 "Each tool store it's own set of such data."
@@ -7281,7 +7288,7 @@ msgstr ""
 msgid "Number of time units for spindle to dwell."
 msgstr "Nombre d'unités de temps pendant lesquelles la broche s'arrête."
 
-#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2128
+#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2140
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333
@@ -7289,7 +7296,7 @@ msgstr "Nombre d'unités de temps pendant lesquelles la broche s'arrête."
 msgid "Probe Z depth"
 msgstr "Prof.r de la sonde Z"
 
-#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2130
+#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2142
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335
@@ -7308,7 +7315,7 @@ msgstr ""
 msgid "Feedrate Probe"
 msgstr "Sonde d'avance"
 
-#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2143
+#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2155
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348
@@ -7318,13 +7325,13 @@ msgstr "L'avance utilisée pendant le sondage."
 
 #: appGUI/ObjectUI.py:1434 appTools/ToolDrilling.py:2364
 #: appTools/ToolIsolation.py:3265 appTools/ToolMilling.py:2042
-#: appTools/ToolNCC.py:4141 appTools/ToolPaint.py:3049
+#: appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3049
 msgid "Apply parameters to all tools"
 msgstr "Appliquer des paramètres à tous les outils"
 
 #: appGUI/ObjectUI.py:1437 appTools/ToolDrilling.py:2367
 #: appTools/ToolIsolation.py:3268 appTools/ToolMilling.py:2045
-#: appTools/ToolNCC.py:4144 appTools/ToolPaint.py:3052
+#: appTools/ToolNCC.py:4204 appTools/ToolPaint.py:3052
 msgid ""
 "The parameters in the current form will be applied\n"
 "on all the tools from the Tool Table."
@@ -7334,13 +7341,13 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1448 appTools/ToolDrilling.py:2378
 #: appTools/ToolIsolation.py:3279 appTools/ToolMilling.py:2056
-#: appTools/ToolNCC.py:4155 appTools/ToolPaint.py:3063
+#: appTools/ToolNCC.py:4215 appTools/ToolPaint.py:3063
 msgid "Common Parameters"
 msgstr "Paramètres communs"
 
 #: appGUI/ObjectUI.py:1450 appTools/ToolDrilling.py:2380
 #: appTools/ToolIsolation.py:3281 appTools/ToolMilling.py:2058
-#: appTools/ToolNCC.py:4157 appTools/ToolPaint.py:3065
+#: appTools/ToolNCC.py:4217 appTools/ToolPaint.py:3065
 msgid "Parameters that are common for all tools."
 msgstr "Paramètres communs à tous les outils."
 
@@ -7543,7 +7550,7 @@ msgstr "Ajoutez une zone d'exclusion."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286
 #: appTools/ToolDrilling.py:2591 appTools/ToolIsolation.py:3427
-#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4285
+#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4345
 #: appTools/ToolPaint.py:3165
 msgid "The kind of selection shape used for area selection."
 msgstr "Type de forme de sélection utilisé pour la sélection de zone."
@@ -7786,97 +7793,97 @@ msgstr ""
 msgid "Autolevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2052
+#: appGUI/ObjectUI.py:2053
 msgid "Enable the autolevelling feature."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2069
+#: appGUI/ObjectUI.py:2081
 #, fuzzy
 #| msgid "Tools Table"
 msgid "Probe Points Table"
 msgstr "Tableau des outils"
 
-#: appGUI/ObjectUI.py:2070
+#: appGUI/ObjectUI.py:2082
 msgid "Generate GCode that will obtain the height map"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2072
+#: appGUI/ObjectUI.py:2084
 msgid "Show"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2073
+#: appGUI/ObjectUI.py:2085
 #, fuzzy
 #| msgid "Toggle the display of axis on canvas"
 msgid "Toggle the display of the Probe Points table."
 msgstr "Basculer l'affichage de l'axe sur le canevas"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 #, fuzzy
 #| msgid "Coordinates"
 msgid "X-Y Coordinates"
 msgstr "Coordonnées"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 #, fuzzy
 #| msgid "Light"
 msgid "Height"
 msgstr "Lumière"
 
-#: appGUI/ObjectUI.py:2090
+#: appGUI/ObjectUI.py:2102
 #, fuzzy
 #| msgid "Plot Options"
 msgid "Plot probing points"
 msgstr "Options de Tracé"
 
-#: appGUI/ObjectUI.py:2092
+#: appGUI/ObjectUI.py:2104
 msgid ""
 "Plot the probing points in the table.\n"
 "If a Voronoi method is used then\n"
 "the Voronoi areas are also plotted."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2107
+#: appGUI/ObjectUI.py:2119
 #, fuzzy
 #| msgid "Finished G-Code generation"
 msgid "Probe GCode Generation"
 msgstr "Génération de GCode terminée"
 
-#: appGUI/ObjectUI.py:2109
+#: appGUI/ObjectUI.py:2121
 msgid ""
 "Will create a GCode which will be sent to the controller,\n"
 "either through a file or directly, with the intent to get the height map\n"
 "that is to modify the original GCode to level the cutting height."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2116
+#: appGUI/ObjectUI.py:2128
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
 #, fuzzy
 #| msgid "Probe Z depth"
 msgid "Probe Z travel"
 msgstr "Prof.r de la sonde Z"
 
-#: appGUI/ObjectUI.py:2118
+#: appGUI/ObjectUI.py:2130
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
 #, fuzzy
 #| msgid "Height (Z) for travelling between the points."
 msgid "The safe Z for probe travelling between probe points."
 msgstr "Hauteur (Z) pour voyager entre les points."
 
-#: appGUI/ObjectUI.py:2141
+#: appGUI/ObjectUI.py:2153
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
 #, fuzzy
 #| msgid "Feedrate"
 msgid "Probe Feedrate"
 msgstr "Vitesse d'avance"
 
-#: appGUI/ObjectUI.py:2158
+#: appGUI/ObjectUI.py:2170
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
 #, fuzzy
 #| msgid "Mode:"
 msgid "Mode"
 msgstr "Mode:"
 
-#: appGUI/ObjectUI.py:2159
+#: appGUI/ObjectUI.py:2171
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
 msgid ""
 "Choose a mode for height map generation.\n"
@@ -7884,21 +7891,21 @@ msgid ""
 "- Grid: will automatically generate a grid of probe points"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2165
+#: appGUI/ObjectUI.py:2177
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
 #: appTools/ToolCutOut.py:2324 appTools/ToolFiducials.py:801
 msgid "Manual"
 msgstr "Manuel"
 
-#: appGUI/ObjectUI.py:2166
+#: appGUI/ObjectUI.py:2178
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
 #, fuzzy
 #| msgid "Grids"
 msgid "Grid"
 msgstr "Pas grilles"
 
-#: appGUI/ObjectUI.py:2173
+#: appGUI/ObjectUI.py:2185
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
 msgid ""
 "Choose a method for approximation of heights from autolevelling data.\n"
@@ -7906,125 +7913,125 @@ msgid ""
 "- Bilinear: will use bilinear interpolation. Usable only for grid mode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2179
+#: appGUI/ObjectUI.py:2191
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
 msgid "Voronoi"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2180
+#: appGUI/ObjectUI.py:2192
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
 #, fuzzy
 #| msgid "Linear"
 msgid "Bilinear"
 msgstr "Linéaire"
 
-#: appGUI/ObjectUI.py:2193
+#: appGUI/ObjectUI.py:2205
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
 #: appTools/ToolPanelize.py:787
 msgid "Columns"
 msgstr "Colonnes"
 
-#: appGUI/ObjectUI.py:2195
+#: appGUI/ObjectUI.py:2207
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
 msgid "The number of grid columns."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2204
+#: appGUI/ObjectUI.py:2216
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
 #: appTools/ToolPanelize.py:797
 msgid "Rows"
 msgstr "Lignes"
 
-#: appGUI/ObjectUI.py:2206
+#: appGUI/ObjectUI.py:2218
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
 msgid "The number of gird rows."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2211
+#: appGUI/ObjectUI.py:2223
 #, fuzzy
 #| msgid "Get Points"
 msgid "Add Probe Points"
 msgstr "Obtenir des points"
 
-#: appGUI/ObjectUI.py:2219
+#: appGUI/ObjectUI.py:2231
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
 #, fuzzy
 #| msgid "Contour"
 msgid "Controller"
 msgstr "Contour"
 
-#: appGUI/ObjectUI.py:2221
+#: appGUI/ObjectUI.py:2233
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
 msgid ""
 "The kind of controller for which to generate\n"
 "height map gcode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2267 appGUI/ObjectUI.py:2282
-#: appObjects/FlatCAMCNCJob.py:1302 appObjects/FlatCAMCNCJob.py:1324
+#: appGUI/ObjectUI.py:2279 appGUI/ObjectUI.py:2294
+#: appObjects/FlatCAMCNCJob.py:1307 appObjects/FlatCAMCNCJob.py:1329
 #, fuzzy
 #| msgid "Contour"
 msgid "Control"
 msgstr "Contour"
 
-#: appGUI/ObjectUI.py:2277 appGUI/ObjectUI.py:2284
-#: appObjects/FlatCAMCNCJob.py:1304 appObjects/FlatCAMCNCJob.py:1326
+#: appGUI/ObjectUI.py:2289 appGUI/ObjectUI.py:2296
+#: appObjects/FlatCAMCNCJob.py:1309 appObjects/FlatCAMCNCJob.py:1331
 #, fuzzy
 #| msgid "Rendered"
 msgid "Sender"
 msgstr "Rendu"
 
-#: appGUI/ObjectUI.py:2298
+#: appGUI/ObjectUI.py:2310
 msgid "COM list"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2300 appGUI/ObjectUI.py:2315
+#: appGUI/ObjectUI.py:2312 appGUI/ObjectUI.py:2327
 msgid "Lists the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2304
+#: appGUI/ObjectUI.py:2316
 msgid "Search"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2306
+#: appGUI/ObjectUI.py:2318
 msgid "Search for the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2313
+#: appGUI/ObjectUI.py:2325
 msgid "Baud rates"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2332
+#: appGUI/ObjectUI.py:2344
 msgid "New, custom baudrate."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2340
+#: appGUI/ObjectUI.py:2352
 msgid "Add the specified custom baudrate to the list."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2346
+#: appGUI/ObjectUI.py:2358
 #, fuzzy
 #| msgid "Delete Selected"
 msgid "Delete selected baudrate"
 msgstr "Supprimer sélectionnée"
 
-#: appGUI/ObjectUI.py:2350
+#: appGUI/ObjectUI.py:2362
 msgid "Reset"
 msgstr "Réinitialiser"
 
-#: appGUI/ObjectUI.py:2352
+#: appGUI/ObjectUI.py:2364
 msgid "Software reset of the controller."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2358 appObjects/FlatCAMCNCJob.py:1318
+#: appGUI/ObjectUI.py:2370 appObjects/FlatCAMCNCJob.py:1323
 #, fuzzy
 #| msgid "Connect"
 msgid "Disconnected"
 msgstr "Relier"
 
-#: appGUI/ObjectUI.py:2360
+#: appGUI/ObjectUI.py:2372
 #, fuzzy
 #| msgid ""
 #| "Create a Gerber object from the selected object, within\n"
@@ -8034,131 +8041,131 @@ msgstr ""
 "Créez un objet Gerber à partir de l'objet sélectionné, dans\n"
 "la case spécifiée."
 
-#: appGUI/ObjectUI.py:2385
+#: appGUI/ObjectUI.py:2397
 msgid "Jog"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2393
+#: appGUI/ObjectUI.py:2405
 #, fuzzy
 #| msgid "Zeros"
 msgid "Zero Axes"
 msgstr "Zéros"
 
-#: appGUI/ObjectUI.py:2426
+#: appGUI/ObjectUI.py:2438
 msgid "Pause/Resume"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2448
+#: appGUI/ObjectUI.py:2460
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
 msgid "Step"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2450
+#: appGUI/ObjectUI.py:2462
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
 msgid "Each jog action will move the axes with this value."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2462
+#: appGUI/ObjectUI.py:2474
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89
 #: appObjects/FlatCAMObj.py:831 appTools/ToolProperties.py:529
 msgid "Feedrate"
 msgstr "Vitesse d'avance"
 
-#: appGUI/ObjectUI.py:2464
+#: appGUI/ObjectUI.py:2476
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
 msgid "Feedrate when jogging."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2484
+#: appGUI/ObjectUI.py:2496
 msgid "Send Command"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2486 appGUI/ObjectUI.py:2496
+#: appGUI/ObjectUI.py:2498 appGUI/ObjectUI.py:2508
 msgid "Send a custom command to GRBL."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2491
+#: appGUI/ObjectUI.py:2503
 msgid "Type GRBL command ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2494
+#: appGUI/ObjectUI.py:2506
 msgid "Send"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2502
+#: appGUI/ObjectUI.py:2514
 #, fuzzy
 #| msgid "Text to PDF parameters"
 msgid "Get Config parameter"
 msgstr "Paramètres texte en PDF"
 
-#: appGUI/ObjectUI.py:2504
+#: appGUI/ObjectUI.py:2516
 msgid "A GRBL configuration parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2509
+#: appGUI/ObjectUI.py:2521
 msgid "Type GRBL parameter ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2512
+#: appGUI/ObjectUI.py:2524
 #, fuzzy
 #| msgid "Geo"
 msgid "Get"
 msgstr "Géo"
 
-#: appGUI/ObjectUI.py:2514
+#: appGUI/ObjectUI.py:2526
 msgid "Get the value of a specified GRBL parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2522
+#: appGUI/ObjectUI.py:2534
 #, fuzzy
 #| msgid "Gerber Export"
 msgid "Get Report"
 msgstr "Gerber exportation"
 
-#: appGUI/ObjectUI.py:2524
+#: appGUI/ObjectUI.py:2536
 msgid "Print in shell the GRBL report."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2530
+#: appGUI/ObjectUI.py:2542
 msgid "Apply AutoLevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2532
+#: appGUI/ObjectUI.py:2544
 msgid ""
 "Will send the probing GCode to the GRBL controller,\n"
 "wait for the Z probing data and then apply this data\n"
 "over the original GCode therefore doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2541
+#: appGUI/ObjectUI.py:2553
 msgid "Will save the GRBL height map."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2551
+#: appGUI/ObjectUI.py:2563
 #, fuzzy
 #| msgid "Starting G-Code"
 msgid "Save Probing GCode"
 msgstr "Démarrer le GCode"
 
-#: appGUI/ObjectUI.py:2553
+#: appGUI/ObjectUI.py:2565
 #, fuzzy
 #| msgid "Starting G-Code"
 msgid "Will save the probing GCode."
 msgstr "Démarrer le GCode"
 
-#: appGUI/ObjectUI.py:2562
+#: appGUI/ObjectUI.py:2574
 msgid "View/Edit the probing GCode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2569 appObjects/FlatCAMCNCJob.py:1735
-#: appObjects/FlatCAMCNCJob.py:1739
+#: appGUI/ObjectUI.py:2581 appObjects/FlatCAMCNCJob.py:1740
+#: appObjects/FlatCAMCNCJob.py:1744
 #, fuzzy
 #| msgid "Import List"
 msgid "Import Height Map"
 msgstr "Importer la liste"
 
-#: appGUI/ObjectUI.py:2571
+#: appGUI/ObjectUI.py:2583
 msgid ""
 "Import the file that has the Z heights\n"
 "obtained through probing and then apply this data\n"
@@ -8166,11 +8173,11 @@ msgid ""
 "doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2589
+#: appGUI/ObjectUI.py:2601
 msgid "Export CNC Code"
 msgstr "Exporter le code CNC"
 
-#: appGUI/ObjectUI.py:2591
+#: appGUI/ObjectUI.py:2603
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
 msgid ""
@@ -8178,96 +8185,96 @@ msgid ""
 "make this object to a file."
 msgstr "Exporter et sauvegarder le GCode dans objet fichier."
 
-#: appGUI/ObjectUI.py:2600
+#: appGUI/ObjectUI.py:2612
 msgid "Save CNC Code"
 msgstr "Enregistrer le code CNC"
 
-#: appGUI/ObjectUI.py:2603
+#: appGUI/ObjectUI.py:2615
 msgid ""
 "Opens dialog to save G-Code\n"
 "file."
 msgstr "Ouvre la boîte de dialogue pour enregistrer le Fichier GCode."
 
-#: appGUI/ObjectUI.py:2610
+#: appGUI/ObjectUI.py:2622
 #, fuzzy
 #| msgid "View CNC Code"
 msgid "Review CNC Code."
 msgstr "Voir le code CNC"
 
-#: appGUI/ObjectUI.py:2671
+#: appGUI/ObjectUI.py:2683
 msgid "Script Object"
 msgstr "Objet de script"
 
-#: appGUI/ObjectUI.py:2691 appGUI/ObjectUI.py:2765
+#: appGUI/ObjectUI.py:2703 appGUI/ObjectUI.py:2777
 msgid "Auto Completer"
 msgstr "Compléteur automatique"
 
-#: appGUI/ObjectUI.py:2693
+#: appGUI/ObjectUI.py:2705
 msgid "This selects if the auto completer is enabled in the Script Editor."
 msgstr ""
 "Ceci sélectionne si le compléteur automatique est activé dans l'éditeur de "
 "script."
 
-#: appGUI/ObjectUI.py:2738
+#: appGUI/ObjectUI.py:2750
 msgid "Document Object"
 msgstr "Objet de Document"
 
-#: appGUI/ObjectUI.py:2767
+#: appGUI/ObjectUI.py:2779
 msgid "This selects if the auto completer is enabled in the Document Editor."
 msgstr ""
 "Ceci sélectionne si le compléteur automatique est activé dans l'éditeur de "
 "document."
 
-#: appGUI/ObjectUI.py:2785
+#: appGUI/ObjectUI.py:2797
 msgid "Font Type"
 msgstr "Type de Police"
 
-#: appGUI/ObjectUI.py:2802
+#: appGUI/ObjectUI.py:2814
 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
 msgid "Font Size"
 msgstr "Taille de Police"
 
-#: appGUI/ObjectUI.py:2838
+#: appGUI/ObjectUI.py:2850
 msgid "Alignment"
 msgstr "Alignement"
 
-#: appGUI/ObjectUI.py:2843
+#: appGUI/ObjectUI.py:2855
 msgid "Align Left"
 msgstr "Alignez à gauche"
 
-#: appGUI/ObjectUI.py:2848 app_Main.py:4993
+#: appGUI/ObjectUI.py:2860 app_Main.py:4993
 msgid "Center"
 msgstr "Centre"
 
-#: appGUI/ObjectUI.py:2853
+#: appGUI/ObjectUI.py:2865
 msgid "Align Right"
 msgstr "Aligner à droite"
 
-#: appGUI/ObjectUI.py:2858
+#: appGUI/ObjectUI.py:2870
 msgid "Justify"
 msgstr "Aligner à justifier"
 
-#: appGUI/ObjectUI.py:2865
+#: appGUI/ObjectUI.py:2877
 msgid "Font Color"
 msgstr "Couleur de la Police"
 
-#: appGUI/ObjectUI.py:2867
+#: appGUI/ObjectUI.py:2879
 msgid "Set the font color for the selected text"
 msgstr "Définir la couleur de la police pour le texte sélectionné"
 
-#: appGUI/ObjectUI.py:2881
+#: appGUI/ObjectUI.py:2893
 msgid "Selection Color"
 msgstr "Couleur de sélection"
 
-#: appGUI/ObjectUI.py:2883
+#: appGUI/ObjectUI.py:2895
 msgid "Set the selection color when doing text selection."
 msgstr "Définissez la couleur de sélection lors de la sélection du texte."
 
-#: appGUI/ObjectUI.py:2897
+#: appGUI/ObjectUI.py:2909
 msgid "Tab Size"
 msgstr "Taille de l'onglet"
 
-#: appGUI/ObjectUI.py:2899
+#: appGUI/ObjectUI.py:2911
 msgid "Set the tab size. In pixels. Default value is 80 pixels."
 msgstr ""
 "Définissez la taille de l'onglet. En pixels. La valeur par défaut est 80 "
@@ -10440,10 +10447,10 @@ msgstr "\"Suivre\""
 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64
 #: appObjects/FlatCAMGerber.py:370 appTools/ToolCopperThieving.py:581
 #: appTools/ToolCopperThieving.py:770 appTools/ToolCopperThieving.py:782
-#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1791
-#: appTools/ToolNCC.py:1818 appTools/ToolNCC.py:1926 appTools/ToolNCC.py:1939
-#: appTools/ToolNCC.py:2785 appTools/ToolNCC.py:2890 appTools/ToolNCC.py:2905
-#: appTools/ToolNCC.py:3171 appTools/ToolNCC.py:3272 appTools/ToolNCC.py:3287
+#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1793
+#: appTools/ToolNCC.py:1820 appTools/ToolNCC.py:1928 appTools/ToolNCC.py:1941
+#: appTools/ToolNCC.py:2845 appTools/ToolNCC.py:2950 appTools/ToolNCC.py:2965
+#: appTools/ToolNCC.py:3231 appTools/ToolNCC.py:3332 appTools/ToolNCC.py:3347
 #: camlib.py:1113
 msgid "Buffering"
 msgstr "Mise en mémoire tampon"
@@ -10775,9 +10782,9 @@ msgstr ""
 
 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
-#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1349
-#: appTools/ToolNCC.py:1665 appTools/ToolNCC.py:1729 appTools/ToolNCC.py:2649
-#: appTools/ToolNCC.py:2658 appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4376
+#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1351
+#: appTools/ToolNCC.py:1667 appTools/ToolNCC.py:1731 appTools/ToolNCC.py:2709
+#: appTools/ToolNCC.py:2718 appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4436
 #: defaults.py:475 tclCommands/TclCommandCopperClear.py:190
 msgid "Itself"
 msgstr "Lui-même"
@@ -10788,8 +10795,8 @@ msgstr "Lui-même"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1219 appTools/ToolIsolation.py:819
 #: appTools/ToolIsolation.py:1435 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1363 appTools/ToolNCC.py:1681 appTools/ToolNCC.py:1736
-#: appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4386 appTools/ToolPaint.py:1061
+#: appTools/ToolNCC.py:1365 appTools/ToolNCC.py:1683 appTools/ToolNCC.py:1738
+#: appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4446 appTools/ToolPaint.py:1061
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3249
 msgid "Area Selection"
 msgstr "Sélection de zone"
@@ -10800,9 +10807,9 @@ msgstr "Sélection de zone"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1220 appTools/ToolDblSided.py:757
 #: appTools/ToolIsolation.py:1475 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1382 appTools/ToolNCC.py:1687 appTools/ToolNCC.py:1744
-#: appTools/ToolNCC.py:2122 appTools/ToolNCC.py:2356 appTools/ToolNCC.py:2694
-#: appTools/ToolNCC.py:4240 appTools/ToolPaint.py:1080
+#: appTools/ToolNCC.py:1384 appTools/ToolNCC.py:1689 appTools/ToolNCC.py:1746
+#: appTools/ToolNCC.py:2124 appTools/ToolNCC.py:2358 appTools/ToolNCC.py:2754
+#: appTools/ToolNCC.py:4300 appTools/ToolPaint.py:1080
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3232
 #: tclCommands/TclCommandCopperClear.py:192 tclCommands/TclCommandPaint.py:166
 msgid "Reference Object"
@@ -12141,7 +12148,7 @@ msgstr "Créer une géométrie pour fraiser des trous."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:140
 #: appTools/ToolDrilling.py:2082 appTools/ToolIsolation.py:3058
-#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3867
+#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3927
 #: appTools/ToolPaint.py:2843
 msgid "Tool order"
 msgstr "L'ordre des Outils"
@@ -12152,8 +12159,8 @@ msgstr "L'ordre des Outils"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141
 #: appTools/ToolDrilling.py:2083 appTools/ToolIsolation.py:3059
-#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3868
-#: appTools/ToolNCC.py:3878 appTools/ToolPaint.py:2844
+#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3928
+#: appTools/ToolNCC.py:3938 appTools/ToolPaint.py:2844
 #: appTools/ToolPaint.py:2854
 msgid ""
 "This set the way that the tools in the tools table are used.\n"
@@ -12181,7 +12188,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:149
 #: appTools/ToolDrilling.py:2091 appTools/ToolIsolation.py:3067
-#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3876
+#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3936
 #: appTools/ToolPaint.py:2852
 msgid "Forward"
 msgstr "L'avant"
@@ -12191,7 +12198,7 @@ msgstr "L'avant"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150
 #: appTools/ToolDrilling.py:2092 appTools/ToolIsolation.py:3068
-#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3877
+#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3937
 #: appTools/ToolPaint.py:2853
 msgid "Reverse"
 msgstr "Inverse"
@@ -12555,7 +12562,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:242
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243
-#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4162
+#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4222
 #: appTools/ToolPaint.py:3069
 msgid "Rest"
 msgstr "Reste"
@@ -12607,13 +12614,13 @@ msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:350
-#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4298
+#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4358
 msgid "Check validity"
 msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:352
-#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4300
+#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4360
 msgid ""
 "If checked then the tools diameters are verified\n"
 "if they will provide a complete isolation."
@@ -12735,7 +12742,7 @@ msgstr ""
 "des caractéristiques de cuivre.\n"
 "La valeur peut être comprise entre 0 et 9999.9 unités FlatCAM."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4166
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4226
 msgid ""
 "If checked, use 'rest machining'.\n"
 "Basically it will clear copper outside PCB features,\n"
@@ -12753,7 +12760,7 @@ msgstr ""
 "plus de cuivre à nettoyer ou il n'y a plus d'outils.\n"
 "Si non coché, utilisez l'algorithme standard."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4246
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4306
 msgid ""
 "Selection of area to be processed.\n"
 "- 'Itself' - the processing extent is based on the object that is "
@@ -12893,7 +12900,7 @@ msgstr "Nombre de lignes du panneau désiré"
 #: appTools/ToolFilm.py:951 appTools/ToolImage.py:117 appTools/ToolImage.py:138
 #: appTools/ToolImage.py:191 appTools/ToolIsolation.py:802
 #: appTools/ToolIsolation.py:3339 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:3789 appTools/ToolNCC.py:4263
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:3849 appTools/ToolNCC.py:4323
 #: appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
 #: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167
 #: appTools/ToolPanelize.py:715 appTools/ToolPanelize.py:809
@@ -13414,33 +13421,33 @@ msgstr ""
 msgid "created/selected"
 msgstr "créé/sélectionné"
 
-#: appObjects/FlatCAMCNCJob.py:637 appObjects/FlatCAMDocument.py:71
+#: appObjects/FlatCAMCNCJob.py:642 appObjects/FlatCAMDocument.py:71
 #: appObjects/FlatCAMScript.py:82
 msgid "<span style=\"color:green;\"><b>Basic</b></span>"
 msgstr "<span style=\"color:green;\"><b>De base</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:644 appObjects/FlatCAMDocument.py:75
+#: appObjects/FlatCAMCNCJob.py:649 appObjects/FlatCAMDocument.py:75
 #: appObjects/FlatCAMScript.py:86
 msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
 msgstr "<span style=\"color:red;\"><b>Avancé</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:780 appObjects/FlatCAMCNCJob.py:1058
+#: appObjects/FlatCAMCNCJob.py:785 appObjects/FlatCAMCNCJob.py:1063
 msgid ""
 "Voronoi function can not be loaded.\n"
 "Shapely >= 1.8 is required"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:808
+#: appObjects/FlatCAMCNCJob.py:813
 #, fuzzy
 #| msgid "Click on Start point ..."
 msgid "Click on canvas to add a Probe Point..."
 msgstr "Cliquez sur le point de départ ..."
 
-#: appObjects/FlatCAMCNCJob.py:1004
+#: appObjects/FlatCAMCNCJob.py:1009
 msgid "Point is not within the object area. Choose another point."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1024
+#: appObjects/FlatCAMCNCJob.py:1029
 #, fuzzy
 #| msgid ""
 #| "Zone added. Click to start adding next zone or right click to finish."
@@ -13451,139 +13458,139 @@ msgstr ""
 "Zone ajoutée. Cliquez pour commencer à ajouter la zone suivante ou faites un "
 "clic droit pour terminer."
 
-#: appObjects/FlatCAMCNCJob.py:1046
+#: appObjects/FlatCAMCNCJob.py:1051
 #, fuzzy
 #| msgid "Finished G-Code processing..."
 msgid "Finished adding Probe Points..."
 msgstr "Traitement terminé du GCode ..."
 
-#: appObjects/FlatCAMCNCJob.py:1260
+#: appObjects/FlatCAMCNCJob.py:1265
 #, fuzzy
 #| msgid "Click to place ..."
 msgid "COM list updated ..."
 msgstr "Cliquez pour placer ..."
 
-#: appObjects/FlatCAMCNCJob.py:1296
+#: appObjects/FlatCAMCNCJob.py:1301
 #, fuzzy
 #| msgid "Connect"
 msgid "Connected"
 msgstr "Relier"
 
-#: appObjects/FlatCAMCNCJob.py:1307
+#: appObjects/FlatCAMCNCJob.py:1312
 msgid "Port connected"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1311
+#: appObjects/FlatCAMCNCJob.py:1316
 msgid "Could not connect to GRBL on port"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1328
+#: appObjects/FlatCAMCNCJob.py:1333
 msgid "Port is connected. Disconnecting"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1330
+#: appObjects/FlatCAMCNCJob.py:1335
 #, fuzzy
 #| msgid "Could not retrieve box object"
 msgid "Could not connect to port"
 msgstr "Impossible de récupérer l'objet boîte"
 
-#: appObjects/FlatCAMCNCJob.py:1360 appObjects/FlatCAMCNCJob.py:1790
+#: appObjects/FlatCAMCNCJob.py:1365 appObjects/FlatCAMCNCJob.py:1795
 #, fuzzy
 #| msgid "Opening G-Code."
 msgid "Sending GCode..."
 msgstr "Ouverture G-Code."
 
-#: appObjects/FlatCAMCNCJob.py:1489
+#: appObjects/FlatCAMCNCJob.py:1494
 msgid "GRBL is doing a home cycle."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1495
+#: appObjects/FlatCAMCNCJob.py:1500
 msgid "GRBL software reset was sent."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1503
+#: appObjects/FlatCAMCNCJob.py:1508
 msgid "GRBL resumed."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1507
+#: appObjects/FlatCAMCNCJob.py:1512
 msgid "GRBL paused."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1649 appObjects/FlatCAMCNCJob.py:1839
-#: appObjects/FlatCAMCNCJob.py:1924 appTools/ToolSolderPaste.py:1066
+#: appObjects/FlatCAMCNCJob.py:1654 appObjects/FlatCAMCNCJob.py:1844
+#: appObjects/FlatCAMCNCJob.py:1929 appTools/ToolSolderPaste.py:1066
 msgid "Export cancelled ..."
 msgstr "Exportation annulée ..."
 
-#: appObjects/FlatCAMCNCJob.py:1673 appObjects/FlatCAMCNCJob.py:1960
+#: appObjects/FlatCAMCNCJob.py:1678 appObjects/FlatCAMCNCJob.py:1965
 #: appObjects/FlatCAMScript.py:134 app_Main.py:7824
 msgid "Loading..."
 msgstr "Chargement..."
 
-#: appObjects/FlatCAMCNCJob.py:1677
+#: appObjects/FlatCAMCNCJob.py:1682
 #, fuzzy
 #| msgid "There is no such parameter"
 msgid "There is nothing to view"
 msgstr "Il n'y a pas de tel paramètre"
 
-#: appObjects/FlatCAMCNCJob.py:1683
+#: appObjects/FlatCAMCNCJob.py:1688
 #, fuzzy
 #| msgid "Gcode Viewer"
 msgid "Code Viewer"
 msgstr "Visionneuse Gcode"
 
-#: appObjects/FlatCAMCNCJob.py:1721
+#: appObjects/FlatCAMCNCJob.py:1726
 #, fuzzy
 #| msgid "Loaded Machine Code into Code Editor"
 msgid "Loaded Machine Code into Code Viewer"
 msgstr "Code machine chargé dans l'éditeur de code"
 
-#: appObjects/FlatCAMCNCJob.py:1766
+#: appObjects/FlatCAMCNCJob.py:1771
 #, fuzzy
 #| msgid "Failed to open config file"
 msgid "Failed to open height map file"
 msgstr "Impossible d'ouvrir le fichier de configuration"
 
-#: appObjects/FlatCAMCNCJob.py:1816
+#: appObjects/FlatCAMCNCJob.py:1821
 msgid "Finished probing. Doing the autolevelling."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1821
+#: appObjects/FlatCAMCNCJob.py:1826
 msgid "Sending probing GCode to the GRBL controller."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1862
+#: appObjects/FlatCAMCNCJob.py:1867
 msgid "Empty GRBL heightmap."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1866
+#: appObjects/FlatCAMCNCJob.py:1871
 #, fuzzy
 #| msgid "Finished G-Code processing..."
 msgid "Finished autolevelling."
 msgstr "Traitement terminé du GCode ..."
 
-#: appObjects/FlatCAMCNCJob.py:1880
+#: appObjects/FlatCAMCNCJob.py:1885
 msgid "Plotting..."
 msgstr "Traçage..."
 
-#: appObjects/FlatCAMCNCJob.py:1950
+#: appObjects/FlatCAMCNCJob.py:1955
 msgid "File saved to"
 msgstr "Fichier enregistré dans"
 
-#: appObjects/FlatCAMCNCJob.py:1974
+#: appObjects/FlatCAMCNCJob.py:1979
 #, fuzzy
 #| msgid "Gcode Viewer"
 msgid "Code Review"
 msgstr "Visionneuse Gcode"
 
-#: appObjects/FlatCAMCNCJob.py:2157
+#: appObjects/FlatCAMCNCJob.py:2162
 msgid "This CNCJob object can't be processed because it is a"
 msgstr "Cet objet CNCJob ne peut pas être traité car il est"
 
-#: appObjects/FlatCAMCNCJob.py:2159
+#: appObjects/FlatCAMCNCJob.py:2164
 msgid "CNCJob object"
 msgstr "Objet CNCJob"
 
-#: appObjects/FlatCAMCNCJob.py:2269
+#: appObjects/FlatCAMCNCJob.py:2274
 msgid ""
 "G-code does not have a G94 code.\n"
 "Append Code snippet will not be used.."
@@ -13646,7 +13653,7 @@ msgstr "Finition"
 #: appTools/ToolIsolation.py:531 appTools/ToolIsolation.py:644
 #: appTools/ToolIsolation.py:710 appTools/ToolMilling.py:628
 #: appTools/ToolMilling.py:749 appTools/ToolMilling.py:794
-#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
+#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
 #: appTools/ToolPaint.py:252 appTools/ToolPaint.py:316
 #: appTools/ToolPaint.py:655
 msgid "Multiple Tools"
@@ -13828,7 +13835,7 @@ msgstr "L'opération n'a pas pu être effectuée."
 
 #: appObjects/FlatCAMGerber.py:558 appObjects/FlatCAMGerber.py:632
 #: appTools/ToolIsolation.py:1583 appTools/ToolIsolation.py:1951
-#: appTools/ToolNCC.py:1854 appTools/ToolNCC.py:2819 appTools/ToolNCC.py:3198
+#: appTools/ToolNCC.py:1856 appTools/ToolNCC.py:2879 appTools/ToolNCC.py:3258
 msgid "Isolation geometry could not be generated."
 msgstr "La géométrie d'isolation n'a pas pu être générée."
 
@@ -14247,7 +14254,7 @@ msgstr ""
 #: appTools/ToolEtchCompensation.py:458 appTools/ToolExtractDrills.py:702
 #: appTools/ToolFiducials.py:932 appTools/ToolFilm.py:1383
 #: appTools/ToolInvertGerber.py:286 appTools/ToolIsolation.py:3477
-#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4328
+#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4388
 #: appTools/ToolOptimal.py:593 appTools/ToolPaint.py:3194
 #: appTools/ToolPanelize.py:889 appTools/ToolPunchGerber.py:993
 #: appTools/ToolQRCode.py:904 appTools/ToolRulesCheck.py:1618
@@ -14263,7 +14270,7 @@ msgstr "Réinitialiser l'outil"
 #: appTools/ToolEtchCompensation.py:461 appTools/ToolExtractDrills.py:705
 #: appTools/ToolFiducials.py:935 appTools/ToolFilm.py:1386
 #: appTools/ToolInvertGerber.py:289 appTools/ToolIsolation.py:3480
-#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4331
+#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4391
 #: appTools/ToolOptimal.py:596 appTools/ToolPaint.py:3197
 #: appTools/ToolPanelize.py:892 appTools/ToolPunchGerber.py:996
 #: appTools/ToolQRCode.py:907 appTools/ToolRulesCheck.py:1621
@@ -14714,8 +14721,8 @@ msgstr "Outil de Copper Thieving fait."
 #: appTools/ToolIsolation.py:908 appTools/ToolIsolation.py:1345
 #: appTools/ToolIsolation.py:1372 appTools/ToolMilling.py:424
 #: appTools/ToolMilling.py:639 appTools/ToolMilling.py:1322
-#: appTools/ToolNCC.py:844 appTools/ToolNCC.py:1306 appTools/ToolNCC.py:1355
-#: appTools/ToolNCC.py:1388 appTools/ToolPaint.py:1086
+#: appTools/ToolNCC.py:846 appTools/ToolNCC.py:1308 appTools/ToolNCC.py:1357
+#: appTools/ToolNCC.py:1390 appTools/ToolPaint.py:1086
 #: appTools/ToolPanelize.py:191 appTools/ToolPanelize.py:205
 #: appTools/ToolSub.py:157 appTools/ToolSub.py:170 appTools/ToolSub.py:359
 #: appTools/ToolSub.py:372 tclCommands/TclCommandCopperClear.py:97
@@ -14746,7 +14753,7 @@ msgstr "Outil de Copper Thieving. Préparer les zones à remplir de cuivre."
 
 #: appTools/ToolCopperThieving.py:599 appTools/ToolFilm.py:631
 #: appTools/ToolFilm.py:879 appTools/ToolIsolation.py:916
-#: appTools/ToolNCC.py:851 appTools/ToolOptimal.py:145
+#: appTools/ToolNCC.py:853 appTools/ToolOptimal.py:145
 #: appTools/ToolPanelize.py:612 appTools/ToolRulesCheck.py:626
 msgid "Working..."
 msgstr "Travail..."
@@ -14755,13 +14762,13 @@ msgstr "Travail..."
 msgid "Geometry not supported for bounding box"
 msgstr "Géométrie non prise en charge pour le cadre de sélection"
 
-#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1679
-#: appTools/ToolNCC.py:1734 appTools/ToolNCC.py:2674 appTools/ToolPaint.py:2457
+#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1681
+#: appTools/ToolNCC.py:1736 appTools/ToolNCC.py:2734 appTools/ToolPaint.py:2457
 msgid "No object available."
 msgstr "Aucun objet disponible."
 
-#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1704
-#: appTools/ToolNCC.py:1757 appTools/ToolNCC.py:2716
+#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1706
+#: appTools/ToolNCC.py:1759 appTools/ToolNCC.py:2776
 msgid "The reference object type is not supported."
 msgstr "Le type d'objet de référence n'est pas pris en charge."
 
@@ -14821,7 +14828,7 @@ msgstr ""
 "spécifiée par un autre objet."
 
 #: appTools/ToolCopperThieving.py:1231 appTools/ToolIsolation.py:3385
-#: appTools/ToolNCC.py:4257 appTools/ToolPaint.py:3137
+#: appTools/ToolNCC.py:4317 appTools/ToolPaint.py:3137
 msgid "Ref. Type"
 msgstr "Type de Réf"
 
@@ -14834,12 +14841,12 @@ msgstr ""
 "Il peut s'agir de Gerber, Excellon ou Géométrie."
 
 #: appTools/ToolCopperThieving.py:1242 appTools/ToolIsolation.py:3396
-#: appTools/ToolNCC.py:4267 appTools/ToolPaint.py:3147
+#: appTools/ToolNCC.py:4327 appTools/ToolPaint.py:3147
 msgid "Ref. Object"
 msgstr "Réf. Objet"
 
 #: appTools/ToolCopperThieving.py:1244 appTools/ToolIsolation.py:3398
-#: appTools/ToolNCC.py:4269 appTools/ToolPaint.py:3149
+#: appTools/ToolNCC.py:4329 appTools/ToolPaint.py:3149
 msgid "The FlatCAM object to be used as non copper clearing reference."
 msgstr "L'objet FlatCAM à utiliser comme référence d'effacement non en cuivre."
 
@@ -14972,7 +14979,7 @@ msgstr "Ajoutera des marqueurs de coin au fichier Gerber sélectionné."
 
 #: appTools/ToolCutOut.py:281 appTools/ToolIsolation.py:791
 #: appTools/ToolIsolation.py:1049 appTools/ToolIsolation.py:1185
-#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:990 appTools/ToolNCC.py:1128
+#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:992 appTools/ToolNCC.py:1130
 #: appTools/ToolPaint.py:395 appTools/ToolPaint.py:686
 #: appTools/ToolPaint.py:823 appTools/ToolSolderPaste.py:131
 #: appTools/ToolSolderPaste.py:464 app_Main.py:4490
@@ -14982,14 +14989,14 @@ msgstr ""
 "réel."
 
 #: appTools/ToolCutOut.py:357 appTools/ToolIsolation.py:1130
-#: appTools/ToolNCC.py:1073 appTools/ToolPaint.py:767
+#: appTools/ToolNCC.py:1075 appTools/ToolPaint.py:767
 #, fuzzy
 #| msgid "Tools in Tools Database edited but not saved."
 msgid "Tool not in Tools Database. Adding a default tool."
 msgstr "La base de données outils a été modifiés mais pas enregistrés."
 
 #: appTools/ToolCutOut.py:364 appTools/ToolDrilling.py:955
-#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1080
+#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1082
 #: appTools/ToolPaint.py:775
 msgid ""
 "Cancelled.\n"
@@ -15009,7 +15016,7 @@ msgid "Default tool added."
 msgstr "Défauts"
 
 #: appTools/ToolCutOut.py:466 appTools/ToolIsolation.py:2577
-#: appTools/ToolNCC.py:3649 appTools/ToolPaint.py:2620
+#: appTools/ToolNCC.py:3709 appTools/ToolPaint.py:2620
 msgid "Selected tool can't be used here. Pick another."
 msgstr ""
 
@@ -15062,7 +15069,7 @@ msgstr "Opération de découpe Forme Libre terminée."
 #: appTools/ToolEtchCompensation.py:158 appTools/ToolInvertGerber.py:105
 #: appTools/ToolIsolation.py:912 appTools/ToolIsolation.py:1349
 #: appTools/ToolIsolation.py:1376 appTools/ToolMilling.py:1326
-#: appTools/ToolNCC.py:848 appTools/ToolNCC.py:1310 appTools/ToolPaint.py:1003
+#: appTools/ToolNCC.py:850 appTools/ToolNCC.py:1312 appTools/ToolPaint.py:1003
 #: appTools/ToolPanelize.py:196 tclCommands/TclCommandBbox.py:71
 #: tclCommands/TclCommandNregions.py:71
 msgid "Object not found"
@@ -15171,7 +15178,7 @@ msgstr ""
 "des objets qui vont remplir la liste déroulante 'Object'."
 
 #: appTools/ToolCutOut.py:2074 appTools/ToolIsolation.py:3125
-#: appTools/ToolNCC.py:3939 appTools/ToolPaint.py:2901
+#: appTools/ToolNCC.py:3999 appTools/ToolPaint.py:2901
 msgid ""
 "Add a new tool to the Tool Table\n"
 "with the diameter specified above.\n"
@@ -16432,7 +16439,7 @@ msgstr "Nouvel Outil"
 msgid "Adding Tool cancelled"
 msgstr "Ajout d'outil annulé"
 
-#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:879
+#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:881
 #: appTools/ToolOptimal.py:179
 msgid ""
 "The Gerber object has one Polygon as geometry.\n"
@@ -16441,7 +16448,7 @@ msgstr ""
 "L'objet Gerber a un polygone comme géométrie.\n"
 "Il n'y a pas de distance entre les éléments géométriques à trouver."
 
-#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:924
+#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:926
 #, fuzzy
 #| msgid "tooldia = tool diameter"
 msgid "Optimal tool diameter found"
@@ -16449,7 +16456,7 @@ msgstr "tooldia = diamètre de l'outil"
 
 #: appTools/ToolIsolation.py:1000 appTools/ToolIsolation.py:1508
 #: appTools/ToolIsolation.py:1710 appTools/ToolIsolation.py:1897
-#: appTools/ToolNCC.py:935 appTools/ToolNCC.py:1343 appTools/ToolPaint.py:1031
+#: appTools/ToolNCC.py:937 appTools/ToolNCC.py:1345 appTools/ToolPaint.py:1031
 #: appTools/ToolPaint.py:1744
 #, fuzzy
 #| msgid "Failed. No tool selected in the tool table ..."
@@ -16463,44 +16470,44 @@ msgstr ""
 
 #: appTools/ToolIsolation.py:1057 appTools/ToolIsolation.py:1144
 #: appTools/ToolIsolation.py:1206 appTools/ToolIsolation.py:2626
-#: appTools/ToolNCC.py:999 appTools/ToolNCC.py:1087 appTools/ToolNCC.py:1149
-#: appTools/ToolNCC.py:3698 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
+#: appTools/ToolNCC.py:1001 appTools/ToolNCC.py:1089 appTools/ToolNCC.py:1151
+#: appTools/ToolNCC.py:3758 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
 #: appTools/ToolPaint.py:844 appTools/ToolPaint.py:2676
 #: appTools/ToolSolderPaste.py:488
 msgid "Cancelled. Tool already in Tool Table."
 msgstr "Annulé. Outil déjà dans la table d'outils."
 
-#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1115
+#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1117
 #: appTools/ToolPaint.py:810
 #, fuzzy
 #| msgid "New tool added to Tool Table."
 msgid "New tool added to Tool Table from Tools Database."
 msgstr "Nouvel outil ajouté à la table d'outils."
 
-#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1179
+#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1181
 #: appTools/ToolPaint.py:873
 #, fuzzy
 #| msgid "New tool added to Tool Table."
 msgid "Default tool added to Tool Table."
 msgstr "Nouvel outil ajouté à la table d'outils."
 
-#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1205
+#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1207
 #: appTools/ToolPaint.py:898
 msgid "Tool from Tool Table was edited."
 msgstr "L'outil de la table d'outils a été modifié."
 
-#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1218
+#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1220
 #: appTools/ToolPaint.py:911 appTools/ToolSolderPaste.py:548
 msgid "Cancelled. New diameter value is already in the Tool Table."
 msgstr ""
 "Annulé. La nouvelle valeur de diamètre est déjà dans la table d'outils."
 
-#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1269
+#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1271
 #: appTools/ToolPaint.py:961
 msgid "Delete failed. Select a tool to delete."
 msgstr "La suppression a échoué. Sélectionnez un outil à supprimer."
 
-#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1275
+#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1277
 #: appTools/ToolPaint.py:967
 msgid "Tool(s) deleted from Tool Table."
 msgstr "Outil (s) supprimé (s) de la table d'outils."
@@ -16594,12 +16601,12 @@ msgstr "Aucun polygone dans la sélection."
 msgid "Click the end point of the paint area."
 msgstr "Cliquez sur le point final de la zone de peinture."
 
-#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3662
+#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3722
 #: appTools/ToolPaint.py:2633 app_Main.py:5773 app_Main.py:5783
 msgid "Tool from DB added in Tool Table."
 msgstr "Outil ajouté a base de données."
 
-#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3715
+#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3775
 #: appTools/ToolPaint.py:2693
 msgid "New tool added to Tool Table."
 msgstr "Nouvel outil ajouté à la table d'outils."
@@ -16608,7 +16615,7 @@ msgstr "Nouvel outil ajouté à la table d'outils."
 msgid "Gerber object for isolation routing."
 msgstr "Objet Gerber pour le routage d'isolement."
 
-#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3815
+#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3875
 msgid ""
 "Tools pool from which the algorithm\n"
 "will pick the ones used for copper clearing."
@@ -16633,7 +16640,7 @@ msgstr ""
 "dans la géométrie résultante. En effet, avec certains outils\n"
 "cette fonction ne pourra pas créer de géométrie de routage."
 
-#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3839
+#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3899
 msgid ""
 "Tool Diameter. It's value (in current FlatCAM units)\n"
 "is the cut width into the material."
@@ -16641,7 +16648,7 @@ msgstr ""
 "Diamètre de l'outil. C'est sa valeur (en unités FlatCAM actuelles)\n"
 "est la largeur de coupe dans le matériau."
 
-#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3843
+#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3903
 msgid ""
 "The Tool Type (TT) can be:\n"
 "- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
@@ -16679,19 +16686,19 @@ msgstr ""
 "d'opération\n"
 "dans la géométrie résultante comme isolement."
 
-#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3923
+#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3983
 #, fuzzy
 #| msgid "Optimal Tool"
 msgid "Optimal"
 msgstr "Outil de Optimal"
 
-#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3927
+#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3987
 msgid ""
 "Find a tool diameter that is guaranteed\n"
 "to do a complete isolation."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:3967
+#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:4027
 #: appTools/ToolPaint.py:2929 appTools/ToolSolderPaste.py:1211
 msgid ""
 "Delete a selection of tools in the Tool Table\n"
@@ -16716,7 +16723,7 @@ msgstr ""
 msgid "Object whose area will be removed from isolation geometry."
 msgstr "Objet dont l'aire sera retirée de la géométrie d'isolation."
 
-#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4259
+#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4319
 msgid ""
 "The type of FlatCAM object to be used as non copper clearing reference.\n"
 "It can be Gerber, Excellon or Geometry."
@@ -16804,113 +16811,113 @@ msgstr "Aucun objet sélectionné."
 msgid "Error when mouse left click."
 msgstr "Erreur lorsque le clic gauche de la souris."
 
-#: appTools/ToolNCC.py:835
+#: appTools/ToolNCC.py:837
 msgid "NCC Tool. Checking tools for validity."
 msgstr ""
 
-#: appTools/ToolNCC.py:947
+#: appTools/ToolNCC.py:949
 msgid ""
 "Incomplete isolation. None of the selected tools could do a complete "
 "isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:950
+#: appTools/ToolNCC.py:952
 msgid "At least one of the selected tools can do a complete isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:1722 appTools/ToolNCC.py:2646
+#: appTools/ToolNCC.py:1724 appTools/ToolNCC.py:2706
 msgid "NCC Tool. Preparing non-copper polygons."
 msgstr "Outil de la NCC. Préparer des polygones non en cuivre."
 
-#: appTools/ToolNCC.py:1782 appTools/ToolNCC.py:2774
+#: appTools/ToolNCC.py:1784 appTools/ToolNCC.py:2834
 msgid "NCC Tool. Calculate 'empty' area."
 msgstr "Outil de la NCC. Calculez la surface \"vide\"."
 
-#: appTools/ToolNCC.py:1793 appTools/ToolNCC.py:1822 appTools/ToolNCC.py:1928
-#: appTools/ToolNCC.py:1941 appTools/ToolNCC.py:2787 appTools/ToolNCC.py:2892
-#: appTools/ToolNCC.py:2907 appTools/ToolNCC.py:3173 appTools/ToolNCC.py:3274
-#: appTools/ToolNCC.py:3289
+#: appTools/ToolNCC.py:1795 appTools/ToolNCC.py:1824 appTools/ToolNCC.py:1930
+#: appTools/ToolNCC.py:1943 appTools/ToolNCC.py:2847 appTools/ToolNCC.py:2952
+#: appTools/ToolNCC.py:2967 appTools/ToolNCC.py:3233 appTools/ToolNCC.py:3334
+#: appTools/ToolNCC.py:3349
 msgid "Buffering finished"
 msgstr "Mise en mémoire tampon terminée"
 
-#: appTools/ToolNCC.py:1797 appTools/ToolNCC.py:1826 appTools/ToolNCC.py:1932
-#: appTools/ToolNCC.py:1944 appTools/ToolNCC.py:2795 appTools/ToolNCC.py:2914
-#: appTools/ToolNCC.py:3180 appTools/ToolNCC.py:3296
+#: appTools/ToolNCC.py:1799 appTools/ToolNCC.py:1828 appTools/ToolNCC.py:1934
+#: appTools/ToolNCC.py:1946 appTools/ToolNCC.py:2855 appTools/ToolNCC.py:2974
+#: appTools/ToolNCC.py:3240 appTools/ToolNCC.py:3356
 msgid "Could not get the extent of the area to be non copper cleared."
 msgstr "Impossible d'obtenir que l'étendue de la zone soit non dépolluée."
 
-#: appTools/ToolNCC.py:1805 appTools/ToolNCC.py:1955 appTools/ToolNCC.py:2925
+#: appTools/ToolNCC.py:1807 appTools/ToolNCC.py:1957 appTools/ToolNCC.py:2985
 msgid "NCC Tool. Finished calculation of 'empty' area."
 msgstr "Outil de la NCC. Terminé le calcul de la zone \"vide\"."
 
-#: appTools/ToolNCC.py:1858 appTools/ToolNCC.py:2822 appTools/ToolNCC.py:2899
-#: appTools/ToolNCC.py:3200 appTools/ToolNCC.py:3281
+#: appTools/ToolNCC.py:1860 appTools/ToolNCC.py:2882 appTools/ToolNCC.py:2959
+#: appTools/ToolNCC.py:3260 appTools/ToolNCC.py:3341
 msgid ""
 "Isolation geometry is broken. Margin is less than isolation tool diameter."
 msgstr ""
 "La géométrie d'isolement est rompue. La marge est inférieure au diamètre de "
 "l'outil d'isolation."
 
-#: appTools/ToolNCC.py:1948 appTools/ToolNCC.py:2918 appTools/ToolNCC.py:3299
+#: appTools/ToolNCC.py:1950 appTools/ToolNCC.py:2978 appTools/ToolNCC.py:3359
 msgid "The selected object is not suitable for copper clearing."
 msgstr "L'objet sélectionné ne convient pas à la clarification du cuivre."
 
-#: appTools/ToolNCC.py:1998
+#: appTools/ToolNCC.py:2000
 msgid "Clearing the polygon with the method: lines."
 msgstr "Effacer le polygone avec la méthode: lignes."
 
-#: appTools/ToolNCC.py:2008
+#: appTools/ToolNCC.py:2010
 msgid "Failed. Clearing the polygon with the method: seed."
 msgstr "Échoué. Effacer le polygone avec la méthode: origine."
 
-#: appTools/ToolNCC.py:2017
+#: appTools/ToolNCC.py:2019
 msgid "Failed. Clearing the polygon with the method: standard."
 msgstr "Échoué. Effacer le polygone avec la méthode: standard."
 
-#: appTools/ToolNCC.py:2033
+#: appTools/ToolNCC.py:2035
 #, fuzzy
 #| msgid "Geometry could not be cleared completely"
 msgid "Polygon could not be cleared. Location:"
 msgstr "La géométrie n'a pas pu être complètement effacée"
 
-#: appTools/ToolNCC.py:2065 appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2595
-#: appTools/ToolNCC.py:2597
+#: appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2069 appTools/ToolNCC.py:2655
+#: appTools/ToolNCC.py:2657
 msgid "Non-Copper clearing ..."
 msgstr "Dégagement sans cuivre ..."
 
-#: appTools/ToolNCC.py:2086
+#: appTools/ToolNCC.py:2088
 msgid ""
 "There is no copper clearing tool in the selection and at least one is needed."
 msgstr ""
 
-#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2742
+#: appTools/ToolNCC.py:2103 appTools/ToolNCC.py:2802
 msgid ""
 "NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
 msgstr ""
 "Outil de la NCC. Polygones non-cuivre finis. La tâche normale de nettoyage "
 "du cuivre a commencé."
 
-#: appTools/ToolNCC.py:2129 appTools/ToolNCC.py:2363
+#: appTools/ToolNCC.py:2131 appTools/ToolNCC.py:2365
 msgid "NCC Tool failed creating bounding box."
 msgstr "L'outil NCC n'a pas pu créer de boîte englobante."
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "NCC Tool clearing with tool diameter"
 msgstr "L'outil NCC s'efface avec le diamètre de l'outil"
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "started."
 msgstr "commencé."
 
-#: appTools/ToolNCC.py:2277
+#: appTools/ToolNCC.py:2279
 #, fuzzy
 #| msgid "Could not get the extent of the area to be non copper cleared."
 msgid "Could not use the tool for copper clear."
 msgstr "Impossible d'obtenir que l'étendue de la zone soit non dépolluée."
 
-#: appTools/ToolNCC.py:2299 appTools/ToolNCC.py:3099
+#: appTools/ToolNCC.py:2301 appTools/ToolNCC.py:3159
 msgid ""
 "There is no NCC Geometry in the file.\n"
 "Usually it means that the tool diameter is too big for the painted "
@@ -16922,22 +16929,22 @@ msgstr ""
 "géométrie peinte.\n"
 "Modifiez les paramètres de peinture et réessayez."
 
-#: appTools/ToolNCC.py:2309 appTools/ToolNCC.py:3108
+#: appTools/ToolNCC.py:2311 appTools/ToolNCC.py:3168
 msgid "NCC Tool clear all done."
 msgstr "Outil de la NCC. Effacer tout fait."
 
-#: appTools/ToolNCC.py:2312 appTools/ToolNCC.py:3111
+#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:3171
 msgid "NCC Tool clear all done but the copper features isolation is broken for"
 msgstr ""
 "Outil de la CCN. Effacer tout fait, mais l'isolation des caractéristiques de "
 "cuivre est cassée pour"
 
-#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:2510 appTools/ToolNCC.py:3113
-#: appTools/ToolNCC.py:3496
+#: appTools/ToolNCC.py:2316 appTools/ToolNCC.py:2570 appTools/ToolNCC.py:3173
+#: appTools/ToolNCC.py:3556
 msgid "tools"
 msgstr "outils"
 
-#: appTools/ToolNCC.py:2341
+#: appTools/ToolNCC.py:2343
 #, fuzzy
 #| msgid "Paint Tool. Rest machining painting area task started."
 msgid "NCC Tool. Rest machining copper clearing task started."
@@ -16945,11 +16952,11 @@ msgstr ""
 "Outil de peinture. Reste l'usinage de la peinture de la zone: tâche "
 "commencée."
 
-#: appTools/ToolNCC.py:2506 appTools/ToolNCC.py:3492
+#: appTools/ToolNCC.py:2566 appTools/ToolNCC.py:3552
 msgid "NCC Tool Rest Machining clear all done."
 msgstr "Outil de la NCC. Reste l'usinage clair tout fait."
 
-#: appTools/ToolNCC.py:2509 appTools/ToolNCC.py:3495
+#: appTools/ToolNCC.py:2569 appTools/ToolNCC.py:3555
 msgid ""
 "NCC Tool Rest Machining clear all done but the copper features isolation is "
 "broken for"
@@ -16957,11 +16964,11 @@ msgstr ""
 "Outil de la NCC. Reste l'usinage clair, tout est fait, mais l'isolation des "
 "caractéristiques en cuivre est cassée"
 
-#: appTools/ToolNCC.py:2607
+#: appTools/ToolNCC.py:2667
 msgid "NCC Tool started. Reading parameters."
 msgstr "L'outil NCC a commencé. Lecture des paramètres."
 
-#: appTools/ToolNCC.py:3594
+#: appTools/ToolNCC.py:3654
 msgid ""
 "Try to use the Buffering Type = Full in Preferences -> Gerber General. "
 "Reload the Gerber file after this change."
@@ -16969,15 +16976,15 @@ msgstr ""
 "Essayez d'utiliser le type de mise en tampon = Plein dans Paramètres  -> "
 "Général Gerber. Rechargez le fichier Gerber après cette modification."
 
-#: appTools/ToolNCC.py:3750
+#: appTools/ToolNCC.py:3810
 msgid "Non-Copper Clearing"
 msgstr "Compensation de la NCC"
 
-#: appTools/ToolNCC.py:3779 appTools/ToolPaint.py:2765
+#: appTools/ToolNCC.py:3839 appTools/ToolPaint.py:2765
 msgid "Obj Type"
 msgstr "Type d'objet"
 
-#: appTools/ToolNCC.py:3781
+#: appTools/ToolNCC.py:3841
 msgid ""
 "Specify the type of object to be cleared of excess copper.\n"
 "It can be of type: Gerber or Geometry.\n"
@@ -16989,11 +16996,11 @@ msgstr ""
 "Ce qui est sélectionné ici dictera le genre\n"
 "des objets qui vont remplir la liste déroulante 'Object'."
 
-#: appTools/ToolNCC.py:3803
+#: appTools/ToolNCC.py:3863
 msgid "Object to be cleared of excess copper."
 msgstr "Objet à nettoyer de l'excès de cuivre."
 
-#: appTools/ToolNCC.py:3831
+#: appTools/ToolNCC.py:3891
 msgid ""
 "This is the Tool Number.\n"
 "Non copper clearing will start with the tool with the biggest \n"
@@ -18121,6 +18128,12 @@ msgstr "Effacez le texte."
 msgid "...processing..."
 msgstr "...En traitement..."
 
+#: appTools/ToolShell.py:293
+#, fuzzy
+#| msgid "FlatCAM Beta"
+msgid "FlatCAM Shell"
+msgstr "FlatCAM Beta"
+
 #: appTools/ToolSolderPaste.py:459
 msgid "Please enter a tool diameter to add, in Float format."
 msgstr "Veuillez saisir un diamètre d'outil à ajouter, au format réel."
@@ -18722,6 +18735,10 @@ msgstr ""
 "L'édition simultanée de plusieurs géométrie n'est pas possible.\n"
 "Modifiez une seule géométrie à la fois."
 
+#: app_Main.py:2261
+msgid "EDITOR Area"
+msgstr ""
+
 #: app_Main.py:2263
 msgid "Editor is activated ..."
 msgstr "Editeur activé ..."
diff --git a/locale/hu/LC_MESSAGES/strings.mo b/locale/hu/LC_MESSAGES/strings.mo
index 8149c5ad..4405ffcf 100644
Binary files a/locale/hu/LC_MESSAGES/strings.mo and b/locale/hu/LC_MESSAGES/strings.mo differ
diff --git a/locale/hu/LC_MESSAGES/strings.po b/locale/hu/LC_MESSAGES/strings.po
index 62f73e55..1cb5e3fd 100644
--- a/locale/hu/LC_MESSAGES/strings.po
+++ b/locale/hu/LC_MESSAGES/strings.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
-"POT-Creation-Date: 2020-10-22 15:08+0300\n"
-"PO-Revision-Date: 2020-10-22 15:08+0300\n"
+"POT-Creation-Date: 2020-10-22 22:02+0300\n"
+"PO-Revision-Date: 2020-10-22 22:02+0300\n"
 "Last-Translator: \n"
 "Language-Team: \n"
 "Language: en\n"
@@ -103,7 +103,7 @@ msgstr ""
 #: appDatabase.py:2998 appDatabase.py:3044 appEditors/AppExcEditor.py:1023
 #: appEditors/AppExcEditor.py:1091 appEditors/AppTextEditor.py:263
 #: appGUI/MainGUI.py:2878 appGUI/MainGUI.py:3100 appGUI/MainGUI.py:3315
-#: appObjects/FlatCAMCNCJob.py:1745 appObjects/ObjectCollection.py:126
+#: appObjects/FlatCAMCNCJob.py:1750 appObjects/ObjectCollection.py:126
 #: appTools/ToolFilm.py:238 appTools/ToolFilm.py:384 appTools/ToolImage.py:112
 #: appTools/ToolMove.py:269 appTools/ToolPcbWizard.py:189
 #: appTools/ToolPcbWizard.py:212 appTools/ToolQRCode.py:526
@@ -119,8 +119,8 @@ msgid "Cancelled."
 msgstr ""
 
 #: Bookmark.py:308 appDatabase.py:673 appDatabase.py:3006
-#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1667
-#: appObjects/FlatCAMCNCJob.py:1857 appObjects/FlatCAMCNCJob.py:2306
+#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1672
+#: appObjects/FlatCAMCNCJob.py:1862 appObjects/FlatCAMCNCJob.py:2311
 #: appTools/ToolFilm.py:582 appTools/ToolFilm.py:830
 #: appTools/ToolSolderPaste.py:1097 app_Main.py:2666 app_Main.py:8451
 #: app_Main.py:8499 app_Main.py:8628 app_Main.py:8765 app_Main.py:8833
@@ -154,24 +154,24 @@ msgid "The user requested a graceful exit of the current task."
 msgstr ""
 
 #: appCommon/Common.py:292 appTools/ToolCopperThieving.py:328
-#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1364
+#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1366
 msgid "Click the start point of the area."
 msgstr ""
 
-#: appCommon/Common.py:351 appTools/ToolNCC.py:1423 appTools/ToolPaint.py:1210
+#: appCommon/Common.py:351 appTools/ToolNCC.py:1425 appTools/ToolPaint.py:1210
 msgid "Click the end point of the area."
 msgstr ""
 
 #: appCommon/Common.py:357 appCommon/Common.py:459
 #: appTools/ToolCopperThieving.py:385 appTools/ToolIsolation.py:2348
-#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1429
-#: appTools/ToolNCC.py:1481 appTools/ToolPaint.py:1216
+#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1431
+#: appTools/ToolNCC.py:1483 appTools/ToolPaint.py:1216
 #: appTools/ToolPaint.py:1267
 msgid "Zone added. Click to start adding next zone or right click to finish."
 msgstr ""
 
 #: appCommon/Common.py:404 appEditors/AppGeoEditor.py:2352
-#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1452
+#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1454
 #: appTools/ToolPaint.py:1238
 msgid "Click on next Point or click right mouse button to complete ..."
 msgstr ""
@@ -268,7 +268,7 @@ msgstr ""
 #: appGUI/ObjectUI.py:1082 appGUI/ObjectUI.py:1650
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:130
 #: appTools/ToolCutOut.py:2060 appTools/ToolIsolation.py:3091
-#: appTools/ToolNCC.py:3906 appTools/ToolNCC.py:3917 appTools/ToolPaint.py:2882
+#: appTools/ToolNCC.py:3966 appTools/ToolNCC.py:3977 appTools/ToolPaint.py:2882
 msgid "Tool Dia"
 msgstr ""
 
@@ -601,13 +601,13 @@ msgstr ""
 #: appDatabase.py:307 appDatabase.py:684 appDatabase.py:718 appDatabase.py:2647
 #: appDatabase.py:3017 appDatabase.py:3051 appTools/ToolCutOut.py:294
 #: appTools/ToolDrilling.py:895 appTools/ToolIsolation.py:1067
-#: appTools/ToolNCC.py:1009 appTools/ToolPaint.py:704
+#: appTools/ToolNCC.py:1011 appTools/ToolPaint.py:704
 msgid "Could not load Tools DB file."
 msgstr ""
 
 #: appDatabase.py:315 appDatabase.py:726 appDatabase.py:2655
 #: appDatabase.py:3059 appTools/ToolCutOut.py:305 appTools/ToolDrilling.py:903
-#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1020
+#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1022
 #: appTools/ToolPaint.py:715
 msgid "Failed to parse Tools DB file."
 msgstr ""
@@ -666,7 +666,7 @@ msgstr ""
 #: appDatabase.py:3464 appObjects/FlatCAMGeometry.py:1089
 #: appTools/ToolCutOut.py:484 appTools/ToolCutOut.py:525
 #: appTools/ToolIsolation.py:2583 appTools/ToolIsolation.py:2667
-#: appTools/ToolNCC.py:3655 appTools/ToolNCC.py:3735 appTools/ToolPaint.py:2626
+#: appTools/ToolNCC.py:3715 appTools/ToolNCC.py:3795 appTools/ToolPaint.py:2626
 #: appTools/ToolPaint.py:2715 app_Main.py:5676 app_Main.py:5718
 #: app_Main.py:5749 app_Main.py:5769 app_Main.py:5779
 msgid "Tools Database"
@@ -720,7 +720,7 @@ msgstr "GCode Parameters"
 
 #: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
 #: appGUI/ObjectUI.py:570 appGUI/ObjectUI.py:894 appGUI/ObjectUI.py:1876
-#: appGUI/ObjectUI.py:2681 appGUI/ObjectUI.py:2748
+#: appGUI/ObjectUI.py:2693 appGUI/ObjectUI.py:2760
 #: appTools/ToolCalibration.py:929 appTools/ToolFiducials.py:681
 msgid "Name"
 msgstr ""
@@ -733,7 +733,7 @@ msgstr ""
 #: appTools/ToolDrilling.py:2065 appTools/ToolIsolation.py:3022
 #: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
 #: appTools/ToolMilling.py:1360 appTools/ToolMilling.py:1670
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 #: appTools/ToolPcbWizard.py:404 appTools/ToolProperties.py:417
 #: appTools/ToolProperties.py:480 appTools/ToolSolderPaste.py:1166
 #: tclCommands/TclCommandDrillcncjob.py:195
@@ -770,7 +770,7 @@ msgstr ""
 
 #: appDatabase.py:1186 appDatabase.py:1504
 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46
-#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:3990
+#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:4050
 msgid "Operation"
 msgstr ""
 
@@ -797,7 +797,7 @@ msgstr ""
 
 #: appDatabase.py:1192 appDatabase.py:1514 appDatabase.py:2761
 #: appDatabase.py:3095 appTools/ToolIsolation.py:1101
-#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4000
+#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4060
 msgid "Isolation"
 msgstr ""
 
@@ -808,7 +808,7 @@ msgid "Paint"
 msgstr ""
 
 #: appDatabase.py:1192 appDatabase.py:2773 appDatabase.py:3111
-#: appTools/ToolNCC.py:1044 appTools/ToolNCC.py:3648
+#: appTools/ToolNCC.py:1046 appTools/ToolNCC.py:3708
 msgid "NCC"
 msgstr ""
 
@@ -823,7 +823,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:303
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:284
-#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4283
+#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4343
 #: appTools/ToolPaint.py:3163
 msgid "Shape"
 msgstr ""
@@ -856,7 +856,7 @@ msgid ""
 "The speed on Z plane."
 msgstr ""
 
-#: appDatabase.py:1506 appTools/ToolNCC.py:3992
+#: appDatabase.py:1506 appTools/ToolNCC.py:4052
 msgid ""
 "The 'Operation' can be:\n"
 "- Isolation -> will ensure that the non-copper clearing is always complete.\n"
@@ -865,7 +865,7 @@ msgid ""
 msgstr ""
 
 #: appDatabase.py:1513 appEditors/AppGerberEditor.py:2749
-#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:3999
+#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:4059
 msgid "Clear"
 msgstr ""
 
@@ -875,7 +875,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137
 #: appTools/ToolIsolation.py:3204 appTools/ToolMilling.py:1760
-#: appTools/ToolNCC.py:4008
+#: appTools/ToolNCC.py:4068
 msgid "Milling Type"
 msgstr ""
 
@@ -885,7 +885,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147
 #: appTools/ToolIsolation.py:3206 appTools/ToolIsolation.py:3214
-#: appTools/ToolNCC.py:4010 appTools/ToolNCC.py:4018
+#: appTools/ToolNCC.py:4070 appTools/ToolNCC.py:4078
 msgid ""
 "Milling type when the selected tool is of type: 'iso_op':\n"
 "- climb / best for precision milling and to reduce tool usage\n"
@@ -896,7 +896,7 @@ msgstr ""
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144
-#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4015
+#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4075
 msgid "Climb"
 msgstr ""
 
@@ -904,7 +904,7 @@ msgstr ""
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:190
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145
-#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4016
+#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4076
 msgid "Conventional"
 msgstr ""
 
@@ -915,12 +915,12 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:161
 #: appTools/ToolDrilling.py:2312 appTools/ToolIsolation.py:3189
-#: appTools/ToolNCC.py:4031 appTools/ToolPaint.py:2955
+#: appTools/ToolNCC.py:4091 appTools/ToolPaint.py:2955
 msgid "Overlap"
 msgstr ""
 
 #: appDatabase.py:1544 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
-#: appTools/ToolNCC.py:4033
+#: appTools/ToolNCC.py:4093
 msgid ""
 "How much (percentage) of the tool width to overlap each tool pass.\n"
 "Adjust the value starting with lower values\n"
@@ -944,8 +944,8 @@ msgstr ""
 #: appTools/ToolCopperThieving.py:1204 appTools/ToolCopperThieving.py:1455
 #: appTools/ToolCorners.py:411 appTools/ToolCutOut.py:2157
 #: appTools/ToolFiducials.py:786 appTools/ToolInvertGerber.py:234
-#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4075
-#: appTools/ToolNCC.py:4178
+#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4135
+#: appTools/ToolNCC.py:4238
 msgid "Margin"
 msgstr ""
 
@@ -956,25 +956,25 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204
 #: appTools/ToolCopperThieving.py:1206 appTools/ToolCorners.py:413
-#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4077
-#: appTools/ToolNCC.py:4180
+#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4137
+#: appTools/ToolNCC.py:4240
 msgid "Bounding box margin."
 msgstr ""
 
 #: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
-#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2172
+#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2184
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
 #: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:196
-#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4052
+#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4112
 #: appTools/ToolPaint.py:2991 appTools/ToolPunchGerber.py:793
 msgid "Method"
 msgstr ""
 
 #: appDatabase.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
-#: appTools/ToolNCC.py:4054
+#: appTools/ToolNCC.py:4114
 msgid ""
 "Algorithm for copper clearing:\n"
 "- Standard: Fixed step inwards.\n"
@@ -985,7 +985,7 @@ msgstr ""
 #: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1963 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1456
+#: appTools/ToolNCC.py:1965 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1456
 #: appTools/ToolPaint.py:3016 defaults.py:346
 #: tclCommands/TclCommandCopperClear.py:126
 #: tclCommands/TclCommandCopperClear.py:134 tclCommands/TclCommandPaint.py:125
@@ -996,7 +996,7 @@ msgstr ""
 #: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1974 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1470
+#: appTools/ToolNCC.py:1976 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1470
 #: appTools/ToolPaint.py:3016 defaults.py:469 defaults.py:507
 #: tclCommands/TclCommandCopperClear.py:128
 #: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
@@ -1007,7 +1007,7 @@ msgstr ""
 #: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1702
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1985 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:160
+#: appTools/ToolNCC.py:1987 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:160
 #: appTools/ToolPaint.py:1484 appTools/ToolPaint.py:3016
 #: tclCommands/TclCommandCopperClear.py:130 tclCommands/TclCommandPaint.py:129
 msgid "Lines"
@@ -1016,24 +1016,24 @@ msgstr ""
 #: appDatabase.py:1586 appDatabase.py:1701
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1996 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1649
+#: appTools/ToolNCC.py:1998 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1649
 #: appTools/ToolPaint.py:3016 tclCommands/TclCommandPaint.py:133
 msgid "Combo"
 msgstr ""
 
 #: appDatabase.py:1594 appDatabase.py:1712 appEditors/AppGeoEditor.py:505
-#: appGUI/ObjectUI.py:2257 appGUI/ObjectUI.py:2280
+#: appGUI/ObjectUI.py:2269 appGUI/ObjectUI.py:2292
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:222
-#: appObjects/FlatCAMCNCJob.py:1300 appObjects/FlatCAMCNCJob.py:1322
-#: appTools/ToolNCC.py:4088 appTools/ToolNCC.py:4191 appTools/ToolPaint.py:3027
+#: appObjects/FlatCAMCNCJob.py:1305 appObjects/FlatCAMCNCJob.py:1327
+#: appTools/ToolNCC.py:4148 appTools/ToolNCC.py:4251 appTools/ToolPaint.py:3027
 msgid "Connect"
 msgstr ""
 
 #: appDatabase.py:1598 appDatabase.py:1715 appEditors/AppGeoEditor.py:507
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
-#: appTools/ToolNCC.py:4092 appTools/ToolNCC.py:4193 appTools/ToolPaint.py:3030
+#: appTools/ToolNCC.py:4152 appTools/ToolNCC.py:4253 appTools/ToolPaint.py:3030
 msgid ""
 "Draw lines between resulting\n"
 "segments to minimize tool lifts."
@@ -1042,14 +1042,14 @@ msgstr ""
 #: appDatabase.py:1604 appDatabase.py:1719 appEditors/AppGeoEditor.py:515
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:230
-#: appTools/ToolNCC.py:4098 appTools/ToolNCC.py:4199 appTools/ToolPaint.py:3034
+#: appTools/ToolNCC.py:4158 appTools/ToolNCC.py:4259 appTools/ToolPaint.py:3034
 msgid "Contour"
 msgstr ""
 
 #: appDatabase.py:1608 appDatabase.py:1722 appEditors/AppGeoEditor.py:517
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232
-#: appTools/ToolNCC.py:4102 appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3037
+#: appTools/ToolNCC.py:4162 appTools/ToolNCC.py:4261 appTools/ToolPaint.py:3037
 msgid ""
 "Cut around the perimeter of the polygon\n"
 "to trim rough edges."
@@ -1061,13 +1061,13 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
 #: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
-#: appTools/ToolNCC.py:4108 appTools/ToolNCC.py:4207 appTools/ToolPaint.py:2976
+#: appTools/ToolNCC.py:4168 appTools/ToolNCC.py:4267 appTools/ToolPaint.py:2976
 #: appTools/ToolPaint.py:3083 appTools/ToolTransform.py:517
 msgid "Offset"
 msgstr ""
 
 #: appDatabase.py:1618 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
-#: appTools/ToolNCC.py:4112 appTools/ToolNCC.py:4209
+#: appTools/ToolNCC.py:4172 appTools/ToolNCC.py:4269
 msgid ""
 "If used, it will add an offset to the copper features.\n"
 "The copper clearing will finish to a distance\n"
@@ -1463,7 +1463,7 @@ msgstr ""
 #: appTools/ToolInvertGerber.py:304 appTools/ToolInvertGerber.py:315
 #: appTools/ToolIsolation.py:3494 appTools/ToolIsolation.py:3505
 #: appTools/ToolMilling.py:2341 appTools/ToolMilling.py:2352
-#: appTools/ToolNCC.py:4448 appTools/ToolNCC.py:4459
+#: appTools/ToolNCC.py:4508 appTools/ToolNCC.py:4519
 #: appTools/ToolOptimal.py:614 appTools/ToolOptimal.py:625
 #: appTools/ToolPaint.py:3267 appTools/ToolPaint.py:3278
 #: appTools/ToolPanelize.py:914 appTools/ToolPanelize.py:925
@@ -1499,7 +1499,7 @@ msgstr ""
 #: appTools/ToolInvertGerber.py:310 appTools/ToolInvertGerber.py:317
 #: appTools/ToolIsolation.py:3500 appTools/ToolIsolation.py:3507
 #: appTools/ToolMilling.py:2347 appTools/ToolMilling.py:2354
-#: appTools/ToolNCC.py:4454 appTools/ToolNCC.py:4461
+#: appTools/ToolNCC.py:4514 appTools/ToolNCC.py:4521
 #: appTools/ToolOptimal.py:620 appTools/ToolOptimal.py:627
 #: appTools/ToolPaint.py:3273 appTools/ToolPaint.py:3280
 #: appTools/ToolPanelize.py:920 appTools/ToolPanelize.py:927
@@ -1647,8 +1647,8 @@ msgstr ""
 #: appEditors/AppExcEditor.py:2003 appObjects/FlatCAMGeometry.py:706
 #: appObjects/FlatCAMGeometry.py:1232 appObjects/FlatCAMGeometry.py:1974
 #: appObjects/FlatCAMGeometry.py:2633 appTools/ToolIsolation.py:1252
-#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1195
-#: appTools/ToolNCC.py:1332 appTools/ToolPaint.py:889
+#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1197
+#: appTools/ToolNCC.py:1334 appTools/ToolPaint.py:889
 #: appTools/ToolPaint.py:1027 appTools/ToolPaint.py:1740
 #: appTools/ToolSolderPaste.py:455 appTools/ToolSolderPaste.py:527
 msgid "Wrong value format entered, use a number."
@@ -1728,7 +1728,7 @@ msgstr ""
 
 #: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:620
 #: appGUI/ObjectUI.py:967 appTools/ToolIsolation.py:3010
-#: appTools/ToolNCC.py:3813 appTools/ToolPaint.py:2800
+#: appTools/ToolNCC.py:3873 appTools/ToolPaint.py:2800
 #: appTools/ToolSolderPaste.py:1155
 msgid "Tools Table"
 msgstr ""
@@ -1761,7 +1761,7 @@ msgstr ""
 
 #: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1084
 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
-#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3908
+#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3968
 msgid "Diameter for the new tool"
 msgstr ""
 
@@ -2100,7 +2100,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:289
 #: appTools/ToolDrilling.py:2588 appTools/ToolExtractDrills.py:486
 #: appTools/ToolExtractDrills.py:619 appTools/ToolIsolation.py:3430
-#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4288
+#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4348
 #: appTools/ToolPaint.py:3168 appTools/ToolPunchGerber.py:759
 #: appTools/ToolPunchGerber.py:909 appTools/ToolQRCode.py:788
 msgid "Square"
@@ -2143,6 +2143,17 @@ msgstr ""
 msgid "Font"
 msgstr ""
 
+#: appEditors/AppGeoEditor.py:313 appEditors/AppGerberEditor.py:2495
+#: appEditors/AppGerberEditor.py:3968 appGUI/ObjectUI.py:316
+#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
+#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
+#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
+#: appTools/ToolFiducials.py:770
+msgid "Size"
+msgstr ""
+
 #: appEditors/AppGeoEditor.py:322 appGUI/MainGUI.py:1502
 msgid "Text"
 msgstr ""
@@ -2162,7 +2173,7 @@ msgstr ""
 #: appTools/ToolIsolation.py:697 appTools/ToolIsolation.py:3166
 #: appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
 #: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:329
-#: appTools/ToolNCC.py:2278 appTools/ToolNCC.py:3980 appTools/ToolPaint.py:304
+#: appTools/ToolNCC.py:2280 appTools/ToolNCC.py:4040 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:2940
 msgid "Tool"
 msgstr ""
@@ -2279,7 +2290,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:256
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
-#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4244
+#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4304
 #: appTools/ToolPaint.py:3097 appTools/ToolTransform.py:557 defaults.py:566
 msgid "Selection"
 msgstr ""
@@ -2315,7 +2326,7 @@ msgid "A point of reference in format X,Y."
 msgstr ""
 
 #: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
-#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2338
+#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2350
 #: appTools/ToolDblSided.py:706 appTools/ToolDblSided.py:892
 #: appTools/ToolNCC.py:63 appTools/ToolPaint.py:137
 #: appTools/ToolSolderPaste.py:160 appTools/ToolSolderPaste.py:1203
@@ -2584,7 +2595,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70
 #: appTools/ToolCalibration.py:881 appTools/ToolDrilling.py:2540
 #: appTools/ToolFilm.py:931 appTools/ToolMilling.py:2218
-#: appTools/ToolNCC.py:3802 appTools/ToolPaint.py:2788
+#: appTools/ToolNCC.py:3862 appTools/ToolPaint.py:2788
 #: appTools/ToolPanelize.py:697 appTools/ToolTransform.py:557
 msgid "Object"
 msgstr ""
@@ -2993,7 +3004,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290
 #: appTools/ToolDrilling.py:2589 appTools/ToolIsolation.py:3431
-#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4289
+#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4349
 #: appTools/ToolPaint.py:3169
 msgid "Polygon"
 msgstr ""
@@ -3028,7 +3039,7 @@ msgstr ""
 msgid "Editing MultiGeo Geometry, tool"
 msgstr ""
 
-#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2280
+#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2282
 msgid "with diameter"
 msgstr ""
 
@@ -3239,17 +3250,6 @@ msgstr ""
 msgid "Code"
 msgstr ""
 
-#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:316
-#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
-#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
-#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
-#: appTools/ToolFiducials.py:770
-msgid "Size"
-msgstr ""
-
 #: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
 #: appGUI/ObjectUI.py:316
 msgid "Dim"
@@ -3337,7 +3337,7 @@ msgstr ""
 #: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1132
 #: appObjects/FlatCAMGeometry.py:560 appTools/ToolIsolation.py:70
 #: appTools/ToolIsolation.py:3150 appTools/ToolNCC.py:69
-#: appTools/ToolNCC.py:3964 appTools/ToolPaint.py:143
+#: appTools/ToolNCC.py:4024 appTools/ToolPaint.py:143
 #: appTools/ToolPaint.py:2926 appTools/ToolSolderPaste.py:163
 #: appTools/ToolSolderPaste.py:1209 app_Main.py:6123
 msgid "Delete"
@@ -3724,20 +3724,20 @@ msgid "Open file"
 msgstr ""
 
 #: appEditors/AppTextEditor.py:255 appEditors/AppTextEditor.py:260
-#: appObjects/FlatCAMCNCJob.py:1641 appObjects/FlatCAMCNCJob.py:1646
-#: appObjects/FlatCAMCNCJob.py:1831 appObjects/FlatCAMCNCJob.py:1836
-#: appObjects/FlatCAMCNCJob.py:1909 appObjects/FlatCAMCNCJob.py:1914
+#: appObjects/FlatCAMCNCJob.py:1646 appObjects/FlatCAMCNCJob.py:1651
+#: appObjects/FlatCAMCNCJob.py:1836 appObjects/FlatCAMCNCJob.py:1841
+#: appObjects/FlatCAMCNCJob.py:1914 appObjects/FlatCAMCNCJob.py:1919
 #: appTools/ToolSolderPaste.py:1063 app_Main.py:7038 app_Main.py:7043
 msgid "Export Code ..."
 msgstr ""
 
-#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1663
-#: appObjects/FlatCAMCNCJob.py:1853 appObjects/FlatCAMCNCJob.py:2302
+#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1668
+#: appObjects/FlatCAMCNCJob.py:1858 appObjects/FlatCAMCNCJob.py:2307
 #: appTools/ToolSolderPaste.py:1093
 msgid "No such file or directory"
 msgstr ""
 
-#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2316
+#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2321
 msgid "Saved to"
 msgstr ""
 
@@ -3763,7 +3763,7 @@ msgstr ""
 msgid "Start GCode"
 msgstr "Starting G-Code..."
 
-#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2007
+#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2012
 #: appTools/ToolCalibration.py:447
 msgid "Loaded Machine Code into Code Editor"
 msgstr ""
@@ -3781,7 +3781,7 @@ msgstr ""
 
 #: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:999
 #: appGUI/ObjectUI.py:2009 appTools/ToolIsolation.py:3022
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 msgid "TT"
 msgstr ""
 
@@ -4797,8 +4797,8 @@ msgstr ""
 msgid "Zoom Fit"
 msgstr ""
 
-#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:2067
-msgid "&Command Line"
+#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:1154
+msgid "Command Line"
 msgstr ""
 
 #: appGUI/MainGUI.py:924 appGUI/MainGUI.py:2079
@@ -5091,10 +5091,6 @@ msgstr ""
 msgid "Preferences"
 msgstr ""
 
-#: appGUI/MainGUI.py:1154
-msgid "Command Line"
-msgstr ""
-
 #: appGUI/MainGUI.py:1160
 msgid "HUD (Heads up display)"
 msgstr ""
@@ -5119,11 +5115,16 @@ msgid ""
 "Reference is (X=0, Y= 0) position"
 msgstr ""
 
+#: appGUI/MainGUI.py:1194
+msgid "TCL Shell"
+msgstr ""
+
 #: appGUI/MainGUI.py:1221 appGUI/MainGUI.py:1470 app_Main.py:8143
 msgid "Project"
 msgstr ""
 
-#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272
+#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272 appGUI/MainGUI.py:3791
+#: appGUI/MainGUI.py:3797
 msgid "Plot Area"
 msgstr ""
 
@@ -5210,7 +5211,7 @@ msgstr ""
 msgid "Toggle Visibility"
 msgstr ""
 
-#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2330
+#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2342
 msgid "New"
 msgstr ""
 
@@ -5223,8 +5224,8 @@ msgstr ""
 #: appTools/ToolDblSided.py:767 appTools/ToolFilm.py:929
 #: appTools/ToolFilm.py:952 appTools/ToolImage.py:136 appTools/ToolImage.py:191
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3338
-#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:803
-#: appTools/ToolNCC.py:3788 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:805
+#: appTools/ToolNCC.py:3848 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:587
@@ -5242,7 +5243,7 @@ msgstr ""
 #: appTools/ToolDblSided.py:527 appTools/ToolDblSided.py:724
 #: appTools/ToolDblSided.py:766 appTools/ToolFilm.py:1207
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPunchGerber.py:803 appTools/ToolPunchGerber.py:818
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:586
@@ -5359,12 +5360,16 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:148
 #: appTools/ToolDrilling.py:2090 appTools/ToolIsolation.py:3066
-#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3875
+#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3935
 #: appTools/ToolPaint.py:2851 appTranslation.py:113 appTranslation.py:215
 #: app_Main.py:2290 app_Main.py:3385 app_Main.py:5810 app_Main.py:6894
 msgid "No"
 msgstr ""
 
+#: appGUI/MainGUI.py:2067
+msgid "&Command Line"
+msgstr ""
+
 #: appGUI/MainGUI.py:2086
 msgid "&Cutout Tool"
 msgstr ""
@@ -6058,7 +6063,7 @@ msgid ""
 "toolpaths to cut around polygons."
 msgstr ""
 
-#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4315
+#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4375
 msgid ""
 "Create the Geometry Object\n"
 "for non-copper routing."
@@ -6111,7 +6116,7 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:467 appGUI/ObjectUI.py:507 appTools/ToolCutOut.py:2287
 #: appTools/ToolCutOut.py:2302 appTools/ToolIsolation.py:3444
-#: appTools/ToolNCC.py:4312 appTools/ToolPaint.py:3178
+#: appTools/ToolNCC.py:4372 appTools/ToolPaint.py:3178
 msgid "Generate Geometry"
 msgstr ""
 
@@ -6379,14 +6384,14 @@ msgid ""
 msgstr ""
 
 #: appGUI/ObjectUI.py:1079 appTools/ToolIsolation.py:3087
-#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3902 appTools/ToolPaint.py:140
+#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3962 appTools/ToolPaint.py:140
 #: appTools/ToolPaint.py:2878
 msgid "Add from DB"
 msgstr ""
 
 #: appGUI/ObjectUI.py:1096 appTools/ToolCutOut.py:2071
 #: appTools/ToolIsolation.py:61 appTools/ToolIsolation.py:3122
-#: appTools/ToolNCC.py:3936 appTools/ToolPaint.py:2898
+#: appTools/ToolNCC.py:3996 appTools/ToolPaint.py:2898
 msgid "Search and Add"
 msgstr ""
 
@@ -6398,12 +6403,12 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1103 appTools/ToolCutOut.py:2083
 #: appTools/ToolIsolation.py:65 appTools/ToolIsolation.py:3133
-#: appTools/ToolNCC.py:3947 appTools/ToolPaint.py:2909
+#: appTools/ToolNCC.py:4007 appTools/ToolPaint.py:2909
 msgid "Pick from DB"
 msgstr ""
 
 #: appGUI/ObjectUI.py:1106 appTools/ToolCutOut.py:2086
-#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:3950
+#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:4010
 #: appTools/ToolPaint.py:2912
 msgid ""
 "Add a new tool to the Tool Table\n"
@@ -6440,8 +6445,8 @@ msgstr ""
 #: appTools/ToolMilling.py:779 appTools/ToolMilling.py:790
 #: appTools/ToolMilling.py:794 appTools/ToolMilling.py:1711
 #: appTools/ToolNCC.py:271 appTools/ToolNCC.py:276 appTools/ToolNCC.py:306
-#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
-#: appTools/ToolNCC.py:3980 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
+#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
+#: appTools/ToolNCC.py:4040 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
 #: appTools/ToolPaint.py:282 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:316 appTools/ToolPaint.py:655
 #: appTools/ToolPaint.py:2940
@@ -6450,7 +6455,7 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1175 appTools/ToolDrilling.py:2119
 #: appTools/ToolIsolation.py:3169 appTools/ToolMilling.py:1714
-#: appTools/ToolNCC.py:3983 appTools/ToolPaint.py:2943
+#: appTools/ToolNCC.py:4043 appTools/ToolPaint.py:2943
 msgid ""
 "The data used for creating GCode.\n"
 "Each tool store it's own set of such data."
@@ -6575,7 +6580,7 @@ msgstr ""
 msgid "Number of time units for spindle to dwell."
 msgstr ""
 
-#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2128
+#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2140
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333
@@ -6583,7 +6588,7 @@ msgstr ""
 msgid "Probe Z depth"
 msgstr ""
 
-#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2130
+#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2142
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335
@@ -6600,7 +6605,7 @@ msgstr ""
 msgid "Feedrate Probe"
 msgstr ""
 
-#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2143
+#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2155
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348
@@ -6610,13 +6615,13 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1434 appTools/ToolDrilling.py:2364
 #: appTools/ToolIsolation.py:3265 appTools/ToolMilling.py:2042
-#: appTools/ToolNCC.py:4141 appTools/ToolPaint.py:3049
+#: appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3049
 msgid "Apply parameters to all tools"
 msgstr ""
 
 #: appGUI/ObjectUI.py:1437 appTools/ToolDrilling.py:2367
 #: appTools/ToolIsolation.py:3268 appTools/ToolMilling.py:2045
-#: appTools/ToolNCC.py:4144 appTools/ToolPaint.py:3052
+#: appTools/ToolNCC.py:4204 appTools/ToolPaint.py:3052
 msgid ""
 "The parameters in the current form will be applied\n"
 "on all the tools from the Tool Table."
@@ -6624,13 +6629,13 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1448 appTools/ToolDrilling.py:2378
 #: appTools/ToolIsolation.py:3279 appTools/ToolMilling.py:2056
-#: appTools/ToolNCC.py:4155 appTools/ToolPaint.py:3063
+#: appTools/ToolNCC.py:4215 appTools/ToolPaint.py:3063
 msgid "Common Parameters"
 msgstr ""
 
 #: appGUI/ObjectUI.py:1450 appTools/ToolDrilling.py:2380
 #: appTools/ToolIsolation.py:3281 appTools/ToolMilling.py:2058
-#: appTools/ToolNCC.py:4157 appTools/ToolPaint.py:3065
+#: appTools/ToolNCC.py:4217 appTools/ToolPaint.py:3065
 msgid "Parameters that are common for all tools."
 msgstr ""
 
@@ -6806,7 +6811,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286
 #: appTools/ToolDrilling.py:2591 appTools/ToolIsolation.py:3427
-#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4285
+#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4345
 #: appTools/ToolPaint.py:3165
 msgid "The kind of selection shape used for area selection."
 msgstr ""
@@ -7007,79 +7012,79 @@ msgstr ""
 msgid "Autolevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2052
+#: appGUI/ObjectUI.py:2053
 msgid "Enable the autolevelling feature."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2069
+#: appGUI/ObjectUI.py:2081
 msgid "Probe Points Table"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2070
+#: appGUI/ObjectUI.py:2082
 msgid "Generate GCode that will obtain the height map"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2072
+#: appGUI/ObjectUI.py:2084
 msgid "Show"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2073
+#: appGUI/ObjectUI.py:2085
 msgid "Toggle the display of the Probe Points table."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 #, fuzzy
 #| msgid "Coordinates decimals"
 msgid "X-Y Coordinates"
 msgstr "Coordinates decimals"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 msgid "Height"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2090
+#: appGUI/ObjectUI.py:2102
 msgid "Plot probing points"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2092
+#: appGUI/ObjectUI.py:2104
 msgid ""
 "Plot the probing points in the table.\n"
 "If a Voronoi method is used then\n"
 "the Voronoi areas are also plotted."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2107
+#: appGUI/ObjectUI.py:2119
 msgid "Probe GCode Generation"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2109
+#: appGUI/ObjectUI.py:2121
 msgid ""
 "Will create a GCode which will be sent to the controller,\n"
 "either through a file or directly, with the intent to get the height map\n"
 "that is to modify the original GCode to level the cutting height."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2116
+#: appGUI/ObjectUI.py:2128
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
 msgid "Probe Z travel"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2118
+#: appGUI/ObjectUI.py:2130
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
 msgid "The safe Z for probe travelling between probe points."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2141
+#: appGUI/ObjectUI.py:2153
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
 msgid "Probe Feedrate"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2158
+#: appGUI/ObjectUI.py:2170
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
 msgid "Mode"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2159
+#: appGUI/ObjectUI.py:2171
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
 msgid ""
 "Choose a mode for height map generation.\n"
@@ -7087,19 +7092,19 @@ msgid ""
 "- Grid: will automatically generate a grid of probe points"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2165
+#: appGUI/ObjectUI.py:2177
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
 #: appTools/ToolCutOut.py:2324 appTools/ToolFiducials.py:801
 msgid "Manual"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2166
+#: appGUI/ObjectUI.py:2178
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
 msgid "Grid"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2173
+#: appGUI/ObjectUI.py:2185
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
 msgid ""
 "Choose a method for approximation of heights from autolevelling data.\n"
@@ -7107,231 +7112,231 @@ msgid ""
 "- Bilinear: will use bilinear interpolation. Usable only for grid mode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2179
+#: appGUI/ObjectUI.py:2191
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
 msgid "Voronoi"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2180
+#: appGUI/ObjectUI.py:2192
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
 msgid "Bilinear"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2193
+#: appGUI/ObjectUI.py:2205
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
 #: appTools/ToolPanelize.py:787
 msgid "Columns"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2195
+#: appGUI/ObjectUI.py:2207
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
 msgid "The number of grid columns."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2204
+#: appGUI/ObjectUI.py:2216
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
 #: appTools/ToolPanelize.py:797
 msgid "Rows"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2206
+#: appGUI/ObjectUI.py:2218
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
 msgid "The number of gird rows."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2211
+#: appGUI/ObjectUI.py:2223
 msgid "Add Probe Points"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2219
+#: appGUI/ObjectUI.py:2231
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
 msgid "Controller"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2221
+#: appGUI/ObjectUI.py:2233
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
 msgid ""
 "The kind of controller for which to generate\n"
 "height map gcode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2267 appGUI/ObjectUI.py:2282
-#: appObjects/FlatCAMCNCJob.py:1302 appObjects/FlatCAMCNCJob.py:1324
+#: appGUI/ObjectUI.py:2279 appGUI/ObjectUI.py:2294
+#: appObjects/FlatCAMCNCJob.py:1307 appObjects/FlatCAMCNCJob.py:1329
 msgid "Control"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2277 appGUI/ObjectUI.py:2284
-#: appObjects/FlatCAMCNCJob.py:1304 appObjects/FlatCAMCNCJob.py:1326
+#: appGUI/ObjectUI.py:2289 appGUI/ObjectUI.py:2296
+#: appObjects/FlatCAMCNCJob.py:1309 appObjects/FlatCAMCNCJob.py:1331
 msgid "Sender"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2298
+#: appGUI/ObjectUI.py:2310
 msgid "COM list"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2300 appGUI/ObjectUI.py:2315
+#: appGUI/ObjectUI.py:2312 appGUI/ObjectUI.py:2327
 msgid "Lists the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2304
+#: appGUI/ObjectUI.py:2316
 msgid "Search"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2306
+#: appGUI/ObjectUI.py:2318
 msgid "Search for the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2313
+#: appGUI/ObjectUI.py:2325
 msgid "Baud rates"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2332
+#: appGUI/ObjectUI.py:2344
 msgid "New, custom baudrate."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2340
+#: appGUI/ObjectUI.py:2352
 msgid "Add the specified custom baudrate to the list."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2346
+#: appGUI/ObjectUI.py:2358
 msgid "Delete selected baudrate"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2350
+#: appGUI/ObjectUI.py:2362
 msgid "Reset"
 msgstr "Reset"
 
-#: appGUI/ObjectUI.py:2352
+#: appGUI/ObjectUI.py:2364
 msgid "Software reset of the controller."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2358 appObjects/FlatCAMCNCJob.py:1318
+#: appGUI/ObjectUI.py:2370 appObjects/FlatCAMCNCJob.py:1323
 msgid "Disconnected"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2360
+#: appGUI/ObjectUI.py:2372
 msgid "Connect to the selected port with the selected baud rate."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2385
+#: appGUI/ObjectUI.py:2397
 msgid "Jog"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2393
+#: appGUI/ObjectUI.py:2405
 msgid "Zero Axes"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2426
+#: appGUI/ObjectUI.py:2438
 msgid "Pause/Resume"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2448
+#: appGUI/ObjectUI.py:2460
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
 msgid "Step"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2450
+#: appGUI/ObjectUI.py:2462
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
 msgid "Each jog action will move the axes with this value."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2462
+#: appGUI/ObjectUI.py:2474
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89
 #: appObjects/FlatCAMObj.py:831 appTools/ToolProperties.py:529
 msgid "Feedrate"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2464
+#: appGUI/ObjectUI.py:2476
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
 msgid "Feedrate when jogging."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2484
+#: appGUI/ObjectUI.py:2496
 msgid "Send Command"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2486 appGUI/ObjectUI.py:2496
+#: appGUI/ObjectUI.py:2498 appGUI/ObjectUI.py:2508
 msgid "Send a custom command to GRBL."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2491
+#: appGUI/ObjectUI.py:2503
 msgid "Type GRBL command ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2494
+#: appGUI/ObjectUI.py:2506
 msgid "Send"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2502
+#: appGUI/ObjectUI.py:2514
 #, fuzzy
 #| msgid "GCode Parameters"
 msgid "Get Config parameter"
 msgstr "GCode Parameters"
 
-#: appGUI/ObjectUI.py:2504
+#: appGUI/ObjectUI.py:2516
 msgid "A GRBL configuration parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2509
+#: appGUI/ObjectUI.py:2521
 msgid "Type GRBL parameter ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2512
+#: appGUI/ObjectUI.py:2524
 msgid "Get"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2514
+#: appGUI/ObjectUI.py:2526
 msgid "Get the value of a specified GRBL parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2522
+#: appGUI/ObjectUI.py:2534
 msgid "Get Report"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2524
+#: appGUI/ObjectUI.py:2536
 msgid "Print in shell the GRBL report."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2530
+#: appGUI/ObjectUI.py:2542
 msgid "Apply AutoLevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2532
+#: appGUI/ObjectUI.py:2544
 msgid ""
 "Will send the probing GCode to the GRBL controller,\n"
 "wait for the Z probing data and then apply this data\n"
 "over the original GCode therefore doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2541
+#: appGUI/ObjectUI.py:2553
 msgid "Will save the GRBL height map."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2551
+#: appGUI/ObjectUI.py:2563
 #, fuzzy
 #| msgid "Starting G-Code..."
 msgid "Save Probing GCode"
 msgstr "Starting G-Code..."
 
-#: appGUI/ObjectUI.py:2553
+#: appGUI/ObjectUI.py:2565
 #, fuzzy
 #| msgid "Starting G-Code..."
 msgid "Will save the probing GCode."
 msgstr "Starting G-Code..."
 
-#: appGUI/ObjectUI.py:2562
+#: appGUI/ObjectUI.py:2574
 msgid "View/Edit the probing GCode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2569 appObjects/FlatCAMCNCJob.py:1735
-#: appObjects/FlatCAMCNCJob.py:1739
+#: appGUI/ObjectUI.py:2581 appObjects/FlatCAMCNCJob.py:1740
+#: appObjects/FlatCAMCNCJob.py:1744
 msgid "Import Height Map"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2571
+#: appGUI/ObjectUI.py:2583
 msgid ""
 "Import the file that has the Z heights\n"
 "obtained through probing and then apply this data\n"
@@ -7339,11 +7344,11 @@ msgid ""
 "doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2589
+#: appGUI/ObjectUI.py:2601
 msgid "Export CNC Code"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2591
+#: appGUI/ObjectUI.py:2603
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
 msgid ""
@@ -7351,90 +7356,90 @@ msgid ""
 "make this object to a file."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2600
+#: appGUI/ObjectUI.py:2612
 msgid "Save CNC Code"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2603
+#: appGUI/ObjectUI.py:2615
 msgid ""
 "Opens dialog to save G-Code\n"
 "file."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2610
+#: appGUI/ObjectUI.py:2622
 msgid "Review CNC Code."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2671
+#: appGUI/ObjectUI.py:2683
 msgid "Script Object"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2691 appGUI/ObjectUI.py:2765
+#: appGUI/ObjectUI.py:2703 appGUI/ObjectUI.py:2777
 msgid "Auto Completer"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2693
+#: appGUI/ObjectUI.py:2705
 msgid "This selects if the auto completer is enabled in the Script Editor."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2738
+#: appGUI/ObjectUI.py:2750
 msgid "Document Object"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2767
+#: appGUI/ObjectUI.py:2779
 msgid "This selects if the auto completer is enabled in the Document Editor."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2785
+#: appGUI/ObjectUI.py:2797
 msgid "Font Type"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2802
+#: appGUI/ObjectUI.py:2814
 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
 msgid "Font Size"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2838
+#: appGUI/ObjectUI.py:2850
 msgid "Alignment"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2843
+#: appGUI/ObjectUI.py:2855
 msgid "Align Left"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2848 app_Main.py:4993
+#: appGUI/ObjectUI.py:2860 app_Main.py:4993
 msgid "Center"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2853
+#: appGUI/ObjectUI.py:2865
 msgid "Align Right"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2858
+#: appGUI/ObjectUI.py:2870
 msgid "Justify"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2865
+#: appGUI/ObjectUI.py:2877
 msgid "Font Color"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2867
+#: appGUI/ObjectUI.py:2879
 msgid "Set the font color for the selected text"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2881
+#: appGUI/ObjectUI.py:2893
 msgid "Selection Color"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2883
+#: appGUI/ObjectUI.py:2895
 msgid "Set the selection color when doing text selection."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2897
+#: appGUI/ObjectUI.py:2909
 msgid "Tab Size"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2899
+#: appGUI/ObjectUI.py:2911
 msgid "Set the tab size. In pixels. Default value is 80 pixels."
 msgstr ""
 
@@ -9229,10 +9234,10 @@ msgstr ""
 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64
 #: appObjects/FlatCAMGerber.py:370 appTools/ToolCopperThieving.py:581
 #: appTools/ToolCopperThieving.py:770 appTools/ToolCopperThieving.py:782
-#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1791
-#: appTools/ToolNCC.py:1818 appTools/ToolNCC.py:1926 appTools/ToolNCC.py:1939
-#: appTools/ToolNCC.py:2785 appTools/ToolNCC.py:2890 appTools/ToolNCC.py:2905
-#: appTools/ToolNCC.py:3171 appTools/ToolNCC.py:3272 appTools/ToolNCC.py:3287
+#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1793
+#: appTools/ToolNCC.py:1820 appTools/ToolNCC.py:1928 appTools/ToolNCC.py:1941
+#: appTools/ToolNCC.py:2845 appTools/ToolNCC.py:2950 appTools/ToolNCC.py:2965
+#: appTools/ToolNCC.py:3231 appTools/ToolNCC.py:3332 appTools/ToolNCC.py:3347
 #: camlib.py:1113
 msgid "Buffering"
 msgstr ""
@@ -9511,9 +9516,9 @@ msgstr ""
 
 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
-#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1349
-#: appTools/ToolNCC.py:1665 appTools/ToolNCC.py:1729 appTools/ToolNCC.py:2649
-#: appTools/ToolNCC.py:2658 appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4376
+#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1351
+#: appTools/ToolNCC.py:1667 appTools/ToolNCC.py:1731 appTools/ToolNCC.py:2709
+#: appTools/ToolNCC.py:2718 appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4436
 #: defaults.py:475 tclCommands/TclCommandCopperClear.py:190
 msgid "Itself"
 msgstr ""
@@ -9524,8 +9529,8 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1219 appTools/ToolIsolation.py:819
 #: appTools/ToolIsolation.py:1435 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1363 appTools/ToolNCC.py:1681 appTools/ToolNCC.py:1736
-#: appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4386 appTools/ToolPaint.py:1061
+#: appTools/ToolNCC.py:1365 appTools/ToolNCC.py:1683 appTools/ToolNCC.py:1738
+#: appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4446 appTools/ToolPaint.py:1061
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3249
 msgid "Area Selection"
 msgstr ""
@@ -9536,9 +9541,9 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1220 appTools/ToolDblSided.py:757
 #: appTools/ToolIsolation.py:1475 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1382 appTools/ToolNCC.py:1687 appTools/ToolNCC.py:1744
-#: appTools/ToolNCC.py:2122 appTools/ToolNCC.py:2356 appTools/ToolNCC.py:2694
-#: appTools/ToolNCC.py:4240 appTools/ToolPaint.py:1080
+#: appTools/ToolNCC.py:1384 appTools/ToolNCC.py:1689 appTools/ToolNCC.py:1746
+#: appTools/ToolNCC.py:2124 appTools/ToolNCC.py:2358 appTools/ToolNCC.py:2754
+#: appTools/ToolNCC.py:4300 appTools/ToolPaint.py:1080
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3232
 #: tclCommands/TclCommandCopperClear.py:192 tclCommands/TclCommandPaint.py:166
 msgid "Reference Object"
@@ -10698,7 +10703,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:140
 #: appTools/ToolDrilling.py:2082 appTools/ToolIsolation.py:3058
-#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3867
+#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3927
 #: appTools/ToolPaint.py:2843
 msgid "Tool order"
 msgstr ""
@@ -10709,8 +10714,8 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141
 #: appTools/ToolDrilling.py:2083 appTools/ToolIsolation.py:3059
-#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3868
-#: appTools/ToolNCC.py:3878 appTools/ToolPaint.py:2844
+#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3928
+#: appTools/ToolNCC.py:3938 appTools/ToolPaint.py:2844
 #: appTools/ToolPaint.py:2854
 msgid ""
 "This set the way that the tools in the tools table are used.\n"
@@ -10727,7 +10732,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:149
 #: appTools/ToolDrilling.py:2091 appTools/ToolIsolation.py:3067
-#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3876
+#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3936
 #: appTools/ToolPaint.py:2852
 msgid "Forward"
 msgstr ""
@@ -10737,7 +10742,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150
 #: appTools/ToolDrilling.py:2092 appTools/ToolIsolation.py:3068
-#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3877
+#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3937
 #: appTools/ToolPaint.py:2853
 msgid "Reverse"
 msgstr ""
@@ -11039,7 +11044,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:242
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243
-#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4162
+#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4222
 #: appTools/ToolPaint.py:3069
 msgid "Rest"
 msgstr ""
@@ -11081,13 +11086,13 @@ msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:350
-#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4298
+#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4358
 msgid "Check validity"
 msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:352
-#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4300
+#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4360
 msgid ""
 "If checked then the tools diameters are verified\n"
 "if they will provide a complete isolation."
@@ -11192,7 +11197,7 @@ msgid ""
 "The value can be between 0.0 and 9999.9 FlatCAM units."
 msgstr ""
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4166
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4226
 msgid ""
 "If checked, use 'rest machining'.\n"
 "Basically it will clear copper outside PCB features,\n"
@@ -11203,7 +11208,7 @@ msgid ""
 "If not checked, use the standard algorithm."
 msgstr ""
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4246
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4306
 msgid ""
 "Selection of area to be processed.\n"
 "- 'Itself' - the processing extent is based on the object that is "
@@ -11312,7 +11317,7 @@ msgstr ""
 #: appTools/ToolFilm.py:951 appTools/ToolImage.py:117 appTools/ToolImage.py:138
 #: appTools/ToolImage.py:191 appTools/ToolIsolation.py:802
 #: appTools/ToolIsolation.py:3339 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:3789 appTools/ToolNCC.py:4263
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:3849 appTools/ToolNCC.py:4323
 #: appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
 #: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167
 #: appTools/ToolPanelize.py:715 appTools/ToolPanelize.py:809
@@ -11779,151 +11784,151 @@ msgstr ""
 msgid "created/selected"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:637 appObjects/FlatCAMDocument.py:71
+#: appObjects/FlatCAMCNCJob.py:642 appObjects/FlatCAMDocument.py:71
 #: appObjects/FlatCAMScript.py:82
 msgid "<span style=\"color:green;\"><b>Basic</b></span>"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:644 appObjects/FlatCAMDocument.py:75
+#: appObjects/FlatCAMCNCJob.py:649 appObjects/FlatCAMDocument.py:75
 #: appObjects/FlatCAMScript.py:86
 msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:780 appObjects/FlatCAMCNCJob.py:1058
+#: appObjects/FlatCAMCNCJob.py:785 appObjects/FlatCAMCNCJob.py:1063
 msgid ""
 "Voronoi function can not be loaded.\n"
 "Shapely >= 1.8 is required"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:808
+#: appObjects/FlatCAMCNCJob.py:813
 msgid "Click on canvas to add a Probe Point..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1004
+#: appObjects/FlatCAMCNCJob.py:1009
 msgid "Point is not within the object area. Choose another point."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1024
+#: appObjects/FlatCAMCNCJob.py:1029
 msgid ""
 "Added a Probe Point... Click again to add another or right click to "
 "finish ..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1046
+#: appObjects/FlatCAMCNCJob.py:1051
 msgid "Finished adding Probe Points..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1260
+#: appObjects/FlatCAMCNCJob.py:1265
 msgid "COM list updated ..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1296
+#: appObjects/FlatCAMCNCJob.py:1301
 msgid "Connected"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1307
+#: appObjects/FlatCAMCNCJob.py:1312
 msgid "Port connected"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1311
+#: appObjects/FlatCAMCNCJob.py:1316
 msgid "Could not connect to GRBL on port"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1328
+#: appObjects/FlatCAMCNCJob.py:1333
 msgid "Port is connected. Disconnecting"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1330
+#: appObjects/FlatCAMCNCJob.py:1335
 msgid "Could not connect to port"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1360 appObjects/FlatCAMCNCJob.py:1790
+#: appObjects/FlatCAMCNCJob.py:1365 appObjects/FlatCAMCNCJob.py:1795
 #, fuzzy
 #| msgid "Starting G-Code..."
 msgid "Sending GCode..."
 msgstr "Starting G-Code..."
 
-#: appObjects/FlatCAMCNCJob.py:1489
+#: appObjects/FlatCAMCNCJob.py:1494
 msgid "GRBL is doing a home cycle."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1495
+#: appObjects/FlatCAMCNCJob.py:1500
 msgid "GRBL software reset was sent."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1503
+#: appObjects/FlatCAMCNCJob.py:1508
 msgid "GRBL resumed."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1507
+#: appObjects/FlatCAMCNCJob.py:1512
 msgid "GRBL paused."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1649 appObjects/FlatCAMCNCJob.py:1839
-#: appObjects/FlatCAMCNCJob.py:1924 appTools/ToolSolderPaste.py:1066
+#: appObjects/FlatCAMCNCJob.py:1654 appObjects/FlatCAMCNCJob.py:1844
+#: appObjects/FlatCAMCNCJob.py:1929 appTools/ToolSolderPaste.py:1066
 msgid "Export cancelled ..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1673 appObjects/FlatCAMCNCJob.py:1960
+#: appObjects/FlatCAMCNCJob.py:1678 appObjects/FlatCAMCNCJob.py:1965
 #: appObjects/FlatCAMScript.py:134 app_Main.py:7824
 msgid "Loading..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1677
+#: appObjects/FlatCAMCNCJob.py:1682
 msgid "There is nothing to view"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1683
+#: appObjects/FlatCAMCNCJob.py:1688
 msgid "Code Viewer"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1721
+#: appObjects/FlatCAMCNCJob.py:1726
 msgid "Loaded Machine Code into Code Viewer"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1766
+#: appObjects/FlatCAMCNCJob.py:1771
 #, fuzzy
 #| msgid "Failed to parse factory defaults file."
 msgid "Failed to open height map file"
 msgstr "Failed to parse factory defaults file."
 
-#: appObjects/FlatCAMCNCJob.py:1816
+#: appObjects/FlatCAMCNCJob.py:1821
 msgid "Finished probing. Doing the autolevelling."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1821
+#: appObjects/FlatCAMCNCJob.py:1826
 msgid "Sending probing GCode to the GRBL controller."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1862
+#: appObjects/FlatCAMCNCJob.py:1867
 msgid "Empty GRBL heightmap."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1866
+#: appObjects/FlatCAMCNCJob.py:1871
 msgid "Finished autolevelling."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1880
+#: appObjects/FlatCAMCNCJob.py:1885
 msgid "Plotting..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1950
+#: appObjects/FlatCAMCNCJob.py:1955
 msgid "File saved to"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1974
+#: appObjects/FlatCAMCNCJob.py:1979
 msgid "Code Review"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:2157
+#: appObjects/FlatCAMCNCJob.py:2162
 msgid "This CNCJob object can't be processed because it is a"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:2159
+#: appObjects/FlatCAMCNCJob.py:2164
 msgid "CNCJob object"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:2269
+#: appObjects/FlatCAMCNCJob.py:2274
 msgid ""
 "G-code does not have a G94 code.\n"
 "Append Code snippet will not be used.."
@@ -11983,7 +11988,7 @@ msgstr ""
 #: appTools/ToolIsolation.py:531 appTools/ToolIsolation.py:644
 #: appTools/ToolIsolation.py:710 appTools/ToolMilling.py:628
 #: appTools/ToolMilling.py:749 appTools/ToolMilling.py:794
-#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
+#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
 #: appTools/ToolPaint.py:252 appTools/ToolPaint.py:316
 #: appTools/ToolPaint.py:655
 msgid "Multiple Tools"
@@ -12150,7 +12155,7 @@ msgstr ""
 
 #: appObjects/FlatCAMGerber.py:558 appObjects/FlatCAMGerber.py:632
 #: appTools/ToolIsolation.py:1583 appTools/ToolIsolation.py:1951
-#: appTools/ToolNCC.py:1854 appTools/ToolNCC.py:2819 appTools/ToolNCC.py:3198
+#: appTools/ToolNCC.py:1856 appTools/ToolNCC.py:2879 appTools/ToolNCC.py:3258
 msgid "Isolation geometry could not be generated."
 msgstr ""
 
@@ -12540,7 +12545,7 @@ msgstr ""
 #: appTools/ToolEtchCompensation.py:458 appTools/ToolExtractDrills.py:702
 #: appTools/ToolFiducials.py:932 appTools/ToolFilm.py:1383
 #: appTools/ToolInvertGerber.py:286 appTools/ToolIsolation.py:3477
-#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4328
+#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4388
 #: appTools/ToolOptimal.py:593 appTools/ToolPaint.py:3194
 #: appTools/ToolPanelize.py:889 appTools/ToolPunchGerber.py:993
 #: appTools/ToolQRCode.py:904 appTools/ToolRulesCheck.py:1618
@@ -12556,7 +12561,7 @@ msgstr ""
 #: appTools/ToolEtchCompensation.py:461 appTools/ToolExtractDrills.py:705
 #: appTools/ToolFiducials.py:935 appTools/ToolFilm.py:1386
 #: appTools/ToolInvertGerber.py:289 appTools/ToolIsolation.py:3480
-#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4331
+#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4391
 #: appTools/ToolOptimal.py:596 appTools/ToolPaint.py:3197
 #: appTools/ToolPanelize.py:892 appTools/ToolPunchGerber.py:996
 #: appTools/ToolQRCode.py:907 appTools/ToolRulesCheck.py:1621
@@ -12952,8 +12957,8 @@ msgstr ""
 #: appTools/ToolIsolation.py:908 appTools/ToolIsolation.py:1345
 #: appTools/ToolIsolation.py:1372 appTools/ToolMilling.py:424
 #: appTools/ToolMilling.py:639 appTools/ToolMilling.py:1322
-#: appTools/ToolNCC.py:844 appTools/ToolNCC.py:1306 appTools/ToolNCC.py:1355
-#: appTools/ToolNCC.py:1388 appTools/ToolPaint.py:1086
+#: appTools/ToolNCC.py:846 appTools/ToolNCC.py:1308 appTools/ToolNCC.py:1357
+#: appTools/ToolNCC.py:1390 appTools/ToolPaint.py:1086
 #: appTools/ToolPanelize.py:191 appTools/ToolPanelize.py:205
 #: appTools/ToolSub.py:157 appTools/ToolSub.py:170 appTools/ToolSub.py:359
 #: appTools/ToolSub.py:372 tclCommands/TclCommandCopperClear.py:97
@@ -12984,7 +12989,7 @@ msgstr ""
 
 #: appTools/ToolCopperThieving.py:599 appTools/ToolFilm.py:631
 #: appTools/ToolFilm.py:879 appTools/ToolIsolation.py:916
-#: appTools/ToolNCC.py:851 appTools/ToolOptimal.py:145
+#: appTools/ToolNCC.py:853 appTools/ToolOptimal.py:145
 #: appTools/ToolPanelize.py:612 appTools/ToolRulesCheck.py:626
 msgid "Working..."
 msgstr ""
@@ -12993,13 +12998,13 @@ msgstr ""
 msgid "Geometry not supported for bounding box"
 msgstr ""
 
-#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1679
-#: appTools/ToolNCC.py:1734 appTools/ToolNCC.py:2674 appTools/ToolPaint.py:2457
+#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1681
+#: appTools/ToolNCC.py:1736 appTools/ToolNCC.py:2734 appTools/ToolPaint.py:2457
 msgid "No object available."
 msgstr ""
 
-#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1704
-#: appTools/ToolNCC.py:1757 appTools/ToolNCC.py:2716
+#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1706
+#: appTools/ToolNCC.py:1759 appTools/ToolNCC.py:2776
 msgid "The reference object type is not supported."
 msgstr ""
 
@@ -13048,7 +13053,7 @@ msgid ""
 msgstr ""
 
 #: appTools/ToolCopperThieving.py:1231 appTools/ToolIsolation.py:3385
-#: appTools/ToolNCC.py:4257 appTools/ToolPaint.py:3137
+#: appTools/ToolNCC.py:4317 appTools/ToolPaint.py:3137
 msgid "Ref. Type"
 msgstr ""
 
@@ -13059,12 +13064,12 @@ msgid ""
 msgstr ""
 
 #: appTools/ToolCopperThieving.py:1242 appTools/ToolIsolation.py:3396
-#: appTools/ToolNCC.py:4267 appTools/ToolPaint.py:3147
+#: appTools/ToolNCC.py:4327 appTools/ToolPaint.py:3147
 msgid "Ref. Object"
 msgstr ""
 
 #: appTools/ToolCopperThieving.py:1244 appTools/ToolIsolation.py:3398
-#: appTools/ToolNCC.py:4269 appTools/ToolPaint.py:3149
+#: appTools/ToolNCC.py:4329 appTools/ToolPaint.py:3149
 msgid "The FlatCAM object to be used as non copper clearing reference."
 msgstr ""
 
@@ -13177,7 +13182,7 @@ msgstr ""
 
 #: appTools/ToolCutOut.py:281 appTools/ToolIsolation.py:791
 #: appTools/ToolIsolation.py:1049 appTools/ToolIsolation.py:1185
-#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:990 appTools/ToolNCC.py:1128
+#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:992 appTools/ToolNCC.py:1130
 #: appTools/ToolPaint.py:395 appTools/ToolPaint.py:686
 #: appTools/ToolPaint.py:823 appTools/ToolSolderPaste.py:131
 #: appTools/ToolSolderPaste.py:464 app_Main.py:4490
@@ -13185,12 +13190,12 @@ msgid "Please enter a tool diameter with non-zero value, in Float format."
 msgstr ""
 
 #: appTools/ToolCutOut.py:357 appTools/ToolIsolation.py:1130
-#: appTools/ToolNCC.py:1073 appTools/ToolPaint.py:767
+#: appTools/ToolNCC.py:1075 appTools/ToolPaint.py:767
 msgid "Tool not in Tools Database. Adding a default tool."
 msgstr ""
 
 #: appTools/ToolCutOut.py:364 appTools/ToolDrilling.py:955
-#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1080
+#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1082
 #: appTools/ToolPaint.py:775
 msgid ""
 "Cancelled.\n"
@@ -13208,7 +13213,7 @@ msgid "Default tool added."
 msgstr ""
 
 #: appTools/ToolCutOut.py:466 appTools/ToolIsolation.py:2577
-#: appTools/ToolNCC.py:3649 appTools/ToolPaint.py:2620
+#: appTools/ToolNCC.py:3709 appTools/ToolPaint.py:2620
 msgid "Selected tool can't be used here. Pick another."
 msgstr ""
 
@@ -13253,7 +13258,7 @@ msgstr ""
 #: appTools/ToolEtchCompensation.py:158 appTools/ToolInvertGerber.py:105
 #: appTools/ToolIsolation.py:912 appTools/ToolIsolation.py:1349
 #: appTools/ToolIsolation.py:1376 appTools/ToolMilling.py:1326
-#: appTools/ToolNCC.py:848 appTools/ToolNCC.py:1310 appTools/ToolPaint.py:1003
+#: appTools/ToolNCC.py:850 appTools/ToolNCC.py:1312 appTools/ToolPaint.py:1003
 #: appTools/ToolPanelize.py:196 tclCommands/TclCommandBbox.py:71
 #: tclCommands/TclCommandNregions.py:71
 msgid "Object not found"
@@ -13343,7 +13348,7 @@ msgid ""
 msgstr ""
 
 #: appTools/ToolCutOut.py:2074 appTools/ToolIsolation.py:3125
-#: appTools/ToolNCC.py:3939 appTools/ToolPaint.py:2901
+#: appTools/ToolNCC.py:3999 appTools/ToolPaint.py:2901
 msgid ""
 "Add a new tool to the Tool Table\n"
 "with the diameter specified above.\n"
@@ -14398,14 +14403,14 @@ msgstr ""
 msgid "Adding Tool cancelled"
 msgstr ""
 
-#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:879
+#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:881
 #: appTools/ToolOptimal.py:179
 msgid ""
 "The Gerber object has one Polygon as geometry.\n"
 "There are no distances between geometry elements to be found."
 msgstr ""
 
-#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:924
+#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:926
 #, fuzzy
 #| msgid "tooldia = tool diameter"
 msgid "Optimal tool diameter found"
@@ -14413,7 +14418,7 @@ msgstr "tooldia = tool diameter"
 
 #: appTools/ToolIsolation.py:1000 appTools/ToolIsolation.py:1508
 #: appTools/ToolIsolation.py:1710 appTools/ToolIsolation.py:1897
-#: appTools/ToolNCC.py:935 appTools/ToolNCC.py:1343 appTools/ToolPaint.py:1031
+#: appTools/ToolNCC.py:937 appTools/ToolNCC.py:1345 appTools/ToolPaint.py:1031
 #: appTools/ToolPaint.py:1744
 #, fuzzy
 #| msgid "The new tool diameter (cut width) to add in the tool table."
@@ -14427,41 +14432,41 @@ msgstr ""
 
 #: appTools/ToolIsolation.py:1057 appTools/ToolIsolation.py:1144
 #: appTools/ToolIsolation.py:1206 appTools/ToolIsolation.py:2626
-#: appTools/ToolNCC.py:999 appTools/ToolNCC.py:1087 appTools/ToolNCC.py:1149
-#: appTools/ToolNCC.py:3698 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
+#: appTools/ToolNCC.py:1001 appTools/ToolNCC.py:1089 appTools/ToolNCC.py:1151
+#: appTools/ToolNCC.py:3758 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
 #: appTools/ToolPaint.py:844 appTools/ToolPaint.py:2676
 #: appTools/ToolSolderPaste.py:488
 msgid "Cancelled. Tool already in Tool Table."
 msgstr ""
 
-#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1115
+#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1117
 #: appTools/ToolPaint.py:810
 msgid "New tool added to Tool Table from Tools Database."
 msgstr ""
 
-#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1179
+#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1181
 #: appTools/ToolPaint.py:873
 #, fuzzy
 #| msgid "Default Tool added. Wrong value format entered."
 msgid "Default tool added to Tool Table."
 msgstr "Default Tool added. Wrong value format entered."
 
-#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1205
+#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1207
 #: appTools/ToolPaint.py:898
 msgid "Tool from Tool Table was edited."
 msgstr ""
 
-#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1218
+#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1220
 #: appTools/ToolPaint.py:911 appTools/ToolSolderPaste.py:548
 msgid "Cancelled. New diameter value is already in the Tool Table."
 msgstr ""
 
-#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1269
+#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1271
 #: appTools/ToolPaint.py:961
 msgid "Delete failed. Select a tool to delete."
 msgstr ""
 
-#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1275
+#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1277
 #: appTools/ToolPaint.py:967
 msgid "Tool(s) deleted from Tool Table."
 msgstr ""
@@ -14547,12 +14552,12 @@ msgstr ""
 msgid "Click the end point of the paint area."
 msgstr ""
 
-#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3662
+#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3722
 #: appTools/ToolPaint.py:2633 app_Main.py:5773 app_Main.py:5783
 msgid "Tool from DB added in Tool Table."
 msgstr ""
 
-#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3715
+#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3775
 #: appTools/ToolPaint.py:2693
 msgid "New tool added to Tool Table."
 msgstr ""
@@ -14561,7 +14566,7 @@ msgstr ""
 msgid "Gerber object for isolation routing."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3815
+#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3875
 msgid ""
 "Tools pool from which the algorithm\n"
 "will pick the ones used for copper clearing."
@@ -14577,13 +14582,13 @@ msgid ""
 "this function will not be able to create routing geometry."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3839
+#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3899
 msgid ""
 "Tool Diameter. It's value (in current FlatCAM units)\n"
 "is the cut width into the material."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3843
+#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3903
 msgid ""
 "The Tool Type (TT) can be:\n"
 "- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
@@ -14603,17 +14608,17 @@ msgid ""
 "in the resulting geometry as Isolation."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3923
+#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3983
 msgid "Optimal"
 msgstr ""
 
-#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3927
+#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3987
 msgid ""
 "Find a tool diameter that is guaranteed\n"
 "to do a complete isolation."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:3967
+#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:4027
 #: appTools/ToolPaint.py:2929 appTools/ToolSolderPaste.py:1211
 msgid ""
 "Delete a selection of tools in the Tool Table\n"
@@ -14632,7 +14637,7 @@ msgstr ""
 msgid "Object whose area will be removed from isolation geometry."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4259
+#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4319
 msgid ""
 "The type of FlatCAM object to be used as non copper clearing reference.\n"
 "It can be Gerber, Excellon or Geometry."
@@ -14701,105 +14706,105 @@ msgstr ""
 msgid "Error when mouse left click."
 msgstr ""
 
-#: appTools/ToolNCC.py:835
+#: appTools/ToolNCC.py:837
 msgid "NCC Tool. Checking tools for validity."
 msgstr ""
 
-#: appTools/ToolNCC.py:947
+#: appTools/ToolNCC.py:949
 msgid ""
 "Incomplete isolation. None of the selected tools could do a complete "
 "isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:950
+#: appTools/ToolNCC.py:952
 msgid "At least one of the selected tools can do a complete isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:1722 appTools/ToolNCC.py:2646
+#: appTools/ToolNCC.py:1724 appTools/ToolNCC.py:2706
 msgid "NCC Tool. Preparing non-copper polygons."
 msgstr ""
 
-#: appTools/ToolNCC.py:1782 appTools/ToolNCC.py:2774
+#: appTools/ToolNCC.py:1784 appTools/ToolNCC.py:2834
 msgid "NCC Tool. Calculate 'empty' area."
 msgstr ""
 
-#: appTools/ToolNCC.py:1793 appTools/ToolNCC.py:1822 appTools/ToolNCC.py:1928
-#: appTools/ToolNCC.py:1941 appTools/ToolNCC.py:2787 appTools/ToolNCC.py:2892
-#: appTools/ToolNCC.py:2907 appTools/ToolNCC.py:3173 appTools/ToolNCC.py:3274
-#: appTools/ToolNCC.py:3289
+#: appTools/ToolNCC.py:1795 appTools/ToolNCC.py:1824 appTools/ToolNCC.py:1930
+#: appTools/ToolNCC.py:1943 appTools/ToolNCC.py:2847 appTools/ToolNCC.py:2952
+#: appTools/ToolNCC.py:2967 appTools/ToolNCC.py:3233 appTools/ToolNCC.py:3334
+#: appTools/ToolNCC.py:3349
 msgid "Buffering finished"
 msgstr ""
 
-#: appTools/ToolNCC.py:1797 appTools/ToolNCC.py:1826 appTools/ToolNCC.py:1932
-#: appTools/ToolNCC.py:1944 appTools/ToolNCC.py:2795 appTools/ToolNCC.py:2914
-#: appTools/ToolNCC.py:3180 appTools/ToolNCC.py:3296
+#: appTools/ToolNCC.py:1799 appTools/ToolNCC.py:1828 appTools/ToolNCC.py:1934
+#: appTools/ToolNCC.py:1946 appTools/ToolNCC.py:2855 appTools/ToolNCC.py:2974
+#: appTools/ToolNCC.py:3240 appTools/ToolNCC.py:3356
 msgid "Could not get the extent of the area to be non copper cleared."
 msgstr ""
 
-#: appTools/ToolNCC.py:1805 appTools/ToolNCC.py:1955 appTools/ToolNCC.py:2925
+#: appTools/ToolNCC.py:1807 appTools/ToolNCC.py:1957 appTools/ToolNCC.py:2985
 msgid "NCC Tool. Finished calculation of 'empty' area."
 msgstr ""
 
-#: appTools/ToolNCC.py:1858 appTools/ToolNCC.py:2822 appTools/ToolNCC.py:2899
-#: appTools/ToolNCC.py:3200 appTools/ToolNCC.py:3281
+#: appTools/ToolNCC.py:1860 appTools/ToolNCC.py:2882 appTools/ToolNCC.py:2959
+#: appTools/ToolNCC.py:3260 appTools/ToolNCC.py:3341
 msgid ""
 "Isolation geometry is broken. Margin is less than isolation tool diameter."
 msgstr ""
 
-#: appTools/ToolNCC.py:1948 appTools/ToolNCC.py:2918 appTools/ToolNCC.py:3299
+#: appTools/ToolNCC.py:1950 appTools/ToolNCC.py:2978 appTools/ToolNCC.py:3359
 msgid "The selected object is not suitable for copper clearing."
 msgstr ""
 
-#: appTools/ToolNCC.py:1998
+#: appTools/ToolNCC.py:2000
 msgid "Clearing the polygon with the method: lines."
 msgstr ""
 
-#: appTools/ToolNCC.py:2008
+#: appTools/ToolNCC.py:2010
 msgid "Failed. Clearing the polygon with the method: seed."
 msgstr ""
 
-#: appTools/ToolNCC.py:2017
+#: appTools/ToolNCC.py:2019
 msgid "Failed. Clearing the polygon with the method: standard."
 msgstr ""
 
-#: appTools/ToolNCC.py:2033
+#: appTools/ToolNCC.py:2035
 msgid "Polygon could not be cleared. Location:"
 msgstr ""
 
-#: appTools/ToolNCC.py:2065 appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2595
-#: appTools/ToolNCC.py:2597
+#: appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2069 appTools/ToolNCC.py:2655
+#: appTools/ToolNCC.py:2657
 msgid "Non-Copper clearing ..."
 msgstr ""
 
-#: appTools/ToolNCC.py:2086
+#: appTools/ToolNCC.py:2088
 msgid ""
 "There is no copper clearing tool in the selection and at least one is needed."
 msgstr ""
 
-#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2742
+#: appTools/ToolNCC.py:2103 appTools/ToolNCC.py:2802
 msgid ""
 "NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
 msgstr ""
 
-#: appTools/ToolNCC.py:2129 appTools/ToolNCC.py:2363
+#: appTools/ToolNCC.py:2131 appTools/ToolNCC.py:2365
 msgid "NCC Tool failed creating bounding box."
 msgstr ""
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "NCC Tool clearing with tool diameter"
 msgstr ""
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "started."
 msgstr ""
 
-#: appTools/ToolNCC.py:2277
+#: appTools/ToolNCC.py:2279
 msgid "Could not use the tool for copper clear."
 msgstr ""
 
-#: appTools/ToolNCC.py:2299 appTools/ToolNCC.py:3099
+#: appTools/ToolNCC.py:2301 appTools/ToolNCC.py:3159
 msgid ""
 "There is no NCC Geometry in the file.\n"
 "Usually it means that the tool diameter is too big for the painted "
@@ -14807,54 +14812,54 @@ msgid ""
 "Change the painting parameters and try again."
 msgstr ""
 
-#: appTools/ToolNCC.py:2309 appTools/ToolNCC.py:3108
+#: appTools/ToolNCC.py:2311 appTools/ToolNCC.py:3168
 msgid "NCC Tool clear all done."
 msgstr ""
 
-#: appTools/ToolNCC.py:2312 appTools/ToolNCC.py:3111
+#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:3171
 msgid "NCC Tool clear all done but the copper features isolation is broken for"
 msgstr ""
 
-#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:2510 appTools/ToolNCC.py:3113
-#: appTools/ToolNCC.py:3496
+#: appTools/ToolNCC.py:2316 appTools/ToolNCC.py:2570 appTools/ToolNCC.py:3173
+#: appTools/ToolNCC.py:3556
 msgid "tools"
 msgstr ""
 
-#: appTools/ToolNCC.py:2341
+#: appTools/ToolNCC.py:2343
 #, fuzzy
 #| msgid "Paint Tool. Rest machining painting area task started."
 msgid "NCC Tool. Rest machining copper clearing task started."
 msgstr "Paint Tool. Rest machining painting area task started."
 
-#: appTools/ToolNCC.py:2506 appTools/ToolNCC.py:3492
+#: appTools/ToolNCC.py:2566 appTools/ToolNCC.py:3552
 msgid "NCC Tool Rest Machining clear all done."
 msgstr ""
 
-#: appTools/ToolNCC.py:2509 appTools/ToolNCC.py:3495
+#: appTools/ToolNCC.py:2569 appTools/ToolNCC.py:3555
 msgid ""
 "NCC Tool Rest Machining clear all done but the copper features isolation is "
 "broken for"
 msgstr ""
 
-#: appTools/ToolNCC.py:2607
+#: appTools/ToolNCC.py:2667
 msgid "NCC Tool started. Reading parameters."
 msgstr ""
 
-#: appTools/ToolNCC.py:3594
+#: appTools/ToolNCC.py:3654
 msgid ""
 "Try to use the Buffering Type = Full in Preferences -> Gerber General. "
 "Reload the Gerber file after this change."
 msgstr ""
 
-#: appTools/ToolNCC.py:3750
+#: appTools/ToolNCC.py:3810
 msgid "Non-Copper Clearing"
 msgstr ""
 
-#: appTools/ToolNCC.py:3779 appTools/ToolPaint.py:2765
+#: appTools/ToolNCC.py:3839 appTools/ToolPaint.py:2765
 msgid "Obj Type"
 msgstr ""
 
-#: appTools/ToolNCC.py:3781
+#: appTools/ToolNCC.py:3841
 msgid ""
 "Specify the type of object to be cleared of excess copper.\n"
 "It can be of type: Gerber or Geometry.\n"
@@ -14862,11 +14867,11 @@ msgid ""
 "of objects that will populate the 'Object' combobox."
 msgstr ""
 
-#: appTools/ToolNCC.py:3803
+#: appTools/ToolNCC.py:3863
 msgid "Object to be cleared of excess copper."
 msgstr ""
 
-#: appTools/ToolNCC.py:3831
+#: appTools/ToolNCC.py:3891
 msgid ""
 "This is the Tool Number.\n"
 "Non copper clearing will start with the tool with the biggest \n"
@@ -15840,6 +15845,12 @@ msgstr ""
 msgid "...processing..."
 msgstr ""
 
+#: appTools/ToolShell.py:293
+#, fuzzy
+#| msgid "FlatCAM Object"
+msgid "FlatCAM Shell"
+msgstr "FlatCAM Object"
+
 #: appTools/ToolSolderPaste.py:459
 msgid "Please enter a tool diameter to add, in Float format."
 msgstr ""
@@ -16353,6 +16364,10 @@ msgid ""
 "Edit only one geometry at a time."
 msgstr ""
 
+#: app_Main.py:2261
+msgid "EDITOR Area"
+msgstr ""
+
 #: app_Main.py:2263
 msgid "Editor is activated ..."
 msgstr ""
@@ -17877,9 +17892,6 @@ msgstr ""
 #~ msgid "Ref. Point"
 #~ msgstr "Ref. Point"
 
-#~ msgid "FlatCAM Object"
-#~ msgstr "FlatCAM Object"
-
 #~ msgid ""
 #~ "Choose which tool to use for Gerber isolation:\n"
 #~ "'Circular' or 'V-shape'.\n"
diff --git a/locale/it/LC_MESSAGES/strings.mo b/locale/it/LC_MESSAGES/strings.mo
index a4af3bbd..e32a2a1c 100644
Binary files a/locale/it/LC_MESSAGES/strings.mo and b/locale/it/LC_MESSAGES/strings.mo differ
diff --git a/locale/it/LC_MESSAGES/strings.po b/locale/it/LC_MESSAGES/strings.po
index 467165e4..609ae428 100644
--- a/locale/it/LC_MESSAGES/strings.po
+++ b/locale/it/LC_MESSAGES/strings.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
-"POT-Creation-Date: 2020-10-22 15:08+0300\n"
-"PO-Revision-Date: 2020-10-22 15:08+0300\n"
+"POT-Creation-Date: 2020-10-22 22:02+0300\n"
+"PO-Revision-Date: 2020-10-22 22:02+0300\n"
 "Last-Translator: \n"
 "Language-Team: \n"
 "Language: it\n"
@@ -108,7 +108,7 @@ msgstr "Segnalibri"
 #: appDatabase.py:2998 appDatabase.py:3044 appEditors/AppExcEditor.py:1023
 #: appEditors/AppExcEditor.py:1091 appEditors/AppTextEditor.py:263
 #: appGUI/MainGUI.py:2878 appGUI/MainGUI.py:3100 appGUI/MainGUI.py:3315
-#: appObjects/FlatCAMCNCJob.py:1745 appObjects/ObjectCollection.py:126
+#: appObjects/FlatCAMCNCJob.py:1750 appObjects/ObjectCollection.py:126
 #: appTools/ToolFilm.py:238 appTools/ToolFilm.py:384 appTools/ToolImage.py:112
 #: appTools/ToolMove.py:269 appTools/ToolPcbWizard.py:189
 #: appTools/ToolPcbWizard.py:212 appTools/ToolQRCode.py:526
@@ -124,8 +124,8 @@ msgid "Cancelled."
 msgstr "Cancellato."
 
 #: Bookmark.py:308 appDatabase.py:673 appDatabase.py:3006
-#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1667
-#: appObjects/FlatCAMCNCJob.py:1857 appObjects/FlatCAMCNCJob.py:2306
+#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1672
+#: appObjects/FlatCAMCNCJob.py:1862 appObjects/FlatCAMCNCJob.py:2311
 #: appTools/ToolFilm.py:582 appTools/ToolFilm.py:830
 #: appTools/ToolSolderPaste.py:1097 app_Main.py:2666 app_Main.py:8451
 #: app_Main.py:8499 app_Main.py:8628 app_Main.py:8765 app_Main.py:8833
@@ -161,18 +161,18 @@ msgid "The user requested a graceful exit of the current task."
 msgstr "L'utente ha richiesto l'uscita dal task corrente."
 
 #: appCommon/Common.py:292 appTools/ToolCopperThieving.py:328
-#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1364
+#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1366
 msgid "Click the start point of the area."
 msgstr "Fai clic sul punto iniziale dell'area."
 
-#: appCommon/Common.py:351 appTools/ToolNCC.py:1423 appTools/ToolPaint.py:1210
+#: appCommon/Common.py:351 appTools/ToolNCC.py:1425 appTools/ToolPaint.py:1210
 msgid "Click the end point of the area."
 msgstr "Fai clic sul punto finale dell'area."
 
 #: appCommon/Common.py:357 appCommon/Common.py:459
 #: appTools/ToolCopperThieving.py:385 appTools/ToolIsolation.py:2348
-#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1429
-#: appTools/ToolNCC.py:1481 appTools/ToolPaint.py:1216
+#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1431
+#: appTools/ToolNCC.py:1483 appTools/ToolPaint.py:1216
 #: appTools/ToolPaint.py:1267
 msgid "Zone added. Click to start adding next zone or right click to finish."
 msgstr ""
@@ -180,7 +180,7 @@ msgstr ""
 "fare clic con il tasto destro per terminare."
 
 #: appCommon/Common.py:404 appEditors/AppGeoEditor.py:2352
-#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1452
+#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1454
 #: appTools/ToolPaint.py:1238
 msgid "Click on next Point or click right mouse button to complete ..."
 msgstr ""
@@ -287,7 +287,7 @@ msgstr "Nome utensile"
 #: appGUI/ObjectUI.py:1082 appGUI/ObjectUI.py:1650
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:130
 #: appTools/ToolCutOut.py:2060 appTools/ToolIsolation.py:3091
-#: appTools/ToolNCC.py:3906 appTools/ToolNCC.py:3917 appTools/ToolPaint.py:2882
+#: appTools/ToolNCC.py:3966 appTools/ToolNCC.py:3977 appTools/ToolPaint.py:2882
 msgid "Tool Dia"
 msgstr "Diametro utensile"
 
@@ -698,13 +698,13 @@ msgstr ""
 #: appDatabase.py:307 appDatabase.py:684 appDatabase.py:718 appDatabase.py:2647
 #: appDatabase.py:3017 appDatabase.py:3051 appTools/ToolCutOut.py:294
 #: appTools/ToolDrilling.py:895 appTools/ToolIsolation.py:1067
-#: appTools/ToolNCC.py:1009 appTools/ToolPaint.py:704
+#: appTools/ToolNCC.py:1011 appTools/ToolPaint.py:704
 msgid "Could not load Tools DB file."
 msgstr "Impossibile caricare il file del DB utensili."
 
 #: appDatabase.py:315 appDatabase.py:726 appDatabase.py:2655
 #: appDatabase.py:3059 appTools/ToolCutOut.py:305 appTools/ToolDrilling.py:903
-#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1020
+#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1022
 #: appTools/ToolPaint.py:715
 msgid "Failed to parse Tools DB file."
 msgstr "Impossibile processare il file del DB utensili."
@@ -763,7 +763,7 @@ msgstr "Importazione DB FlatCAM utensili"
 #: appDatabase.py:3464 appObjects/FlatCAMGeometry.py:1089
 #: appTools/ToolCutOut.py:484 appTools/ToolCutOut.py:525
 #: appTools/ToolIsolation.py:2583 appTools/ToolIsolation.py:2667
-#: appTools/ToolNCC.py:3655 appTools/ToolNCC.py:3735 appTools/ToolPaint.py:2626
+#: appTools/ToolNCC.py:3715 appTools/ToolNCC.py:3795 appTools/ToolPaint.py:2626
 #: appTools/ToolPaint.py:2715 app_Main.py:5676 app_Main.py:5718
 #: app_Main.py:5749 app_Main.py:5769 app_Main.py:5779
 msgid "Tools Database"
@@ -811,7 +811,7 @@ msgstr "Parametri taglio"
 
 #: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
 #: appGUI/ObjectUI.py:570 appGUI/ObjectUI.py:894 appGUI/ObjectUI.py:1876
-#: appGUI/ObjectUI.py:2681 appGUI/ObjectUI.py:2748
+#: appGUI/ObjectUI.py:2693 appGUI/ObjectUI.py:2760
 #: appTools/ToolCalibration.py:929 appTools/ToolFiducials.py:681
 msgid "Name"
 msgstr "Nome"
@@ -824,7 +824,7 @@ msgstr "Nome"
 #: appTools/ToolDrilling.py:2065 appTools/ToolIsolation.py:3022
 #: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
 #: appTools/ToolMilling.py:1360 appTools/ToolMilling.py:1670
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 #: appTools/ToolPcbWizard.py:404 appTools/ToolProperties.py:417
 #: appTools/ToolProperties.py:480 appTools/ToolSolderPaste.py:1166
 #: tclCommands/TclCommandDrillcncjob.py:195
@@ -862,7 +862,7 @@ msgstr "Imposta la tolleranza massima dell'utensile."
 
 #: appDatabase.py:1186 appDatabase.py:1504
 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46
-#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:3990
+#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:4050
 msgid "Operation"
 msgstr "Operazione"
 
@@ -889,7 +889,7 @@ msgstr "Foratura"
 
 #: appDatabase.py:1192 appDatabase.py:1514 appDatabase.py:2761
 #: appDatabase.py:3095 appTools/ToolIsolation.py:1101
-#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4000
+#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4060
 msgid "Isolation"
 msgstr "Isolamento"
 
@@ -900,7 +900,7 @@ msgid "Paint"
 msgstr "Disegno"
 
 #: appDatabase.py:1192 appDatabase.py:2773 appDatabase.py:3111
-#: appTools/ToolNCC.py:1044 appTools/ToolNCC.py:3648
+#: appTools/ToolNCC.py:1046 appTools/ToolNCC.py:3708
 msgid "NCC"
 msgstr "NCC"
 
@@ -915,7 +915,7 @@ msgstr "Ritaglia"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:303
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:284
-#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4283
+#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4343
 #: appTools/ToolPaint.py:3163
 msgid "Shape"
 msgstr "Forma"
@@ -952,7 +952,7 @@ msgstr ""
 "Avanzamento Z. Feedrate Z\n"
 "La velocità sull'asse Z."
 
-#: appDatabase.py:1506 appTools/ToolNCC.py:3992
+#: appDatabase.py:1506 appTools/ToolNCC.py:4052
 msgid ""
 "The 'Operation' can be:\n"
 "- Isolation -> will ensure that the non-copper clearing is always complete.\n"
@@ -965,7 +965,7 @@ msgstr ""
 "- Cancella -> la normale pulizia non-rame."
 
 #: appDatabase.py:1513 appEditors/AppGerberEditor.py:2749
-#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:3999
+#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:4059
 msgid "Clear"
 msgstr "Pulisci"
 
@@ -975,7 +975,7 @@ msgstr "Pulisci"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137
 #: appTools/ToolIsolation.py:3204 appTools/ToolMilling.py:1760
-#: appTools/ToolNCC.py:4008
+#: appTools/ToolNCC.py:4068
 msgid "Milling Type"
 msgstr "Tipo di fresatura"
 
@@ -985,7 +985,7 @@ msgstr "Tipo di fresatura"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147
 #: appTools/ToolIsolation.py:3206 appTools/ToolIsolation.py:3214
-#: appTools/ToolNCC.py:4010 appTools/ToolNCC.py:4018
+#: appTools/ToolNCC.py:4070 appTools/ToolNCC.py:4078
 msgid ""
 "Milling type when the selected tool is of type: 'iso_op':\n"
 "- climb / best for precision milling and to reduce tool usage\n"
@@ -1000,7 +1000,7 @@ msgstr ""
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144
-#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4015
+#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4075
 msgid "Climb"
 msgstr "Salita"
 
@@ -1008,7 +1008,7 @@ msgstr "Salita"
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:190
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145
-#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4016
+#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4076
 msgid "Conventional"
 msgstr "Convenzionale"
 
@@ -1019,12 +1019,12 @@ msgstr "Convenzionale"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:161
 #: appTools/ToolDrilling.py:2312 appTools/ToolIsolation.py:3189
-#: appTools/ToolNCC.py:4031 appTools/ToolPaint.py:2955
+#: appTools/ToolNCC.py:4091 appTools/ToolPaint.py:2955
 msgid "Overlap"
 msgstr "Sovrapposizione"
 
 #: appDatabase.py:1544 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
-#: appTools/ToolNCC.py:4033
+#: appTools/ToolNCC.py:4093
 msgid ""
 "How much (percentage) of the tool width to overlap each tool pass.\n"
 "Adjust the value starting with lower values\n"
@@ -1055,8 +1055,8 @@ msgstr ""
 #: appTools/ToolCopperThieving.py:1204 appTools/ToolCopperThieving.py:1455
 #: appTools/ToolCorners.py:411 appTools/ToolCutOut.py:2157
 #: appTools/ToolFiducials.py:786 appTools/ToolInvertGerber.py:234
-#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4075
-#: appTools/ToolNCC.py:4178
+#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4135
+#: appTools/ToolNCC.py:4238
 msgid "Margin"
 msgstr "Margine"
 
@@ -1067,25 +1067,25 @@ msgstr "Margine"
 #: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204
 #: appTools/ToolCopperThieving.py:1206 appTools/ToolCorners.py:413
-#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4077
-#: appTools/ToolNCC.py:4180
+#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4137
+#: appTools/ToolNCC.py:4240
 msgid "Bounding box margin."
 msgstr "Margine del riquadro di delimitazione."
 
 #: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
-#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2172
+#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2184
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
 #: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:196
-#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4052
+#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4112
 #: appTools/ToolPaint.py:2991 appTools/ToolPunchGerber.py:793
 msgid "Method"
 msgstr "Metodo"
 
 #: appDatabase.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
-#: appTools/ToolNCC.py:4054
+#: appTools/ToolNCC.py:4114
 msgid ""
 "Algorithm for copper clearing:\n"
 "- Standard: Fixed step inwards.\n"
@@ -1100,7 +1100,7 @@ msgstr ""
 #: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1963 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1456
+#: appTools/ToolNCC.py:1965 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1456
 #: appTools/ToolPaint.py:3016 defaults.py:346
 #: tclCommands/TclCommandCopperClear.py:126
 #: tclCommands/TclCommandCopperClear.py:134 tclCommands/TclCommandPaint.py:125
@@ -1111,7 +1111,7 @@ msgstr "Standard"
 #: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1974 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1470
+#: appTools/ToolNCC.py:1976 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1470
 #: appTools/ToolPaint.py:3016 defaults.py:469 defaults.py:507
 #: tclCommands/TclCommandCopperClear.py:128
 #: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
@@ -1122,7 +1122,7 @@ msgstr "Seme"
 #: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1702
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1985 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:160
+#: appTools/ToolNCC.py:1987 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:160
 #: appTools/ToolPaint.py:1484 appTools/ToolPaint.py:3016
 #: tclCommands/TclCommandCopperClear.py:130 tclCommands/TclCommandPaint.py:129
 msgid "Lines"
@@ -1131,24 +1131,24 @@ msgstr "Righe"
 #: appDatabase.py:1586 appDatabase.py:1701
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1996 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1649
+#: appTools/ToolNCC.py:1998 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1649
 #: appTools/ToolPaint.py:3016 tclCommands/TclCommandPaint.py:133
 msgid "Combo"
 msgstr "Combinata"
 
 #: appDatabase.py:1594 appDatabase.py:1712 appEditors/AppGeoEditor.py:505
-#: appGUI/ObjectUI.py:2257 appGUI/ObjectUI.py:2280
+#: appGUI/ObjectUI.py:2269 appGUI/ObjectUI.py:2292
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:222
-#: appObjects/FlatCAMCNCJob.py:1300 appObjects/FlatCAMCNCJob.py:1322
-#: appTools/ToolNCC.py:4088 appTools/ToolNCC.py:4191 appTools/ToolPaint.py:3027
+#: appObjects/FlatCAMCNCJob.py:1305 appObjects/FlatCAMCNCJob.py:1327
+#: appTools/ToolNCC.py:4148 appTools/ToolNCC.py:4251 appTools/ToolPaint.py:3027
 msgid "Connect"
 msgstr "Connetti"
 
 #: appDatabase.py:1598 appDatabase.py:1715 appEditors/AppGeoEditor.py:507
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
-#: appTools/ToolNCC.py:4092 appTools/ToolNCC.py:4193 appTools/ToolPaint.py:3030
+#: appTools/ToolNCC.py:4152 appTools/ToolNCC.py:4253 appTools/ToolPaint.py:3030
 msgid ""
 "Draw lines between resulting\n"
 "segments to minimize tool lifts."
@@ -1159,14 +1159,14 @@ msgstr ""
 #: appDatabase.py:1604 appDatabase.py:1719 appEditors/AppGeoEditor.py:515
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:230
-#: appTools/ToolNCC.py:4098 appTools/ToolNCC.py:4199 appTools/ToolPaint.py:3034
+#: appTools/ToolNCC.py:4158 appTools/ToolNCC.py:4259 appTools/ToolPaint.py:3034
 msgid "Contour"
 msgstr "Controno"
 
 #: appDatabase.py:1608 appDatabase.py:1722 appEditors/AppGeoEditor.py:517
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232
-#: appTools/ToolNCC.py:4102 appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3037
+#: appTools/ToolNCC.py:4162 appTools/ToolNCC.py:4261 appTools/ToolPaint.py:3037
 msgid ""
 "Cut around the perimeter of the polygon\n"
 "to trim rough edges."
@@ -1180,13 +1180,13 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
 #: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
-#: appTools/ToolNCC.py:4108 appTools/ToolNCC.py:4207 appTools/ToolPaint.py:2976
+#: appTools/ToolNCC.py:4168 appTools/ToolNCC.py:4267 appTools/ToolPaint.py:2976
 #: appTools/ToolPaint.py:3083 appTools/ToolTransform.py:517
 msgid "Offset"
 msgstr "Offset"
 
 #: appDatabase.py:1618 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
-#: appTools/ToolNCC.py:4112 appTools/ToolNCC.py:4209
+#: appTools/ToolNCC.py:4172 appTools/ToolNCC.py:4269
 msgid ""
 "If used, it will add an offset to the copper features.\n"
 "The copper clearing will finish to a distance\n"
@@ -1673,7 +1673,7 @@ msgstr ""
 #: appTools/ToolInvertGerber.py:304 appTools/ToolInvertGerber.py:315
 #: appTools/ToolIsolation.py:3494 appTools/ToolIsolation.py:3505
 #: appTools/ToolMilling.py:2341 appTools/ToolMilling.py:2352
-#: appTools/ToolNCC.py:4448 appTools/ToolNCC.py:4459
+#: appTools/ToolNCC.py:4508 appTools/ToolNCC.py:4519
 #: appTools/ToolOptimal.py:614 appTools/ToolOptimal.py:625
 #: appTools/ToolPaint.py:3267 appTools/ToolPaint.py:3278
 #: appTools/ToolPanelize.py:914 appTools/ToolPanelize.py:925
@@ -1709,7 +1709,7 @@ msgstr "Il valore modificato è fuori range"
 #: appTools/ToolInvertGerber.py:310 appTools/ToolInvertGerber.py:317
 #: appTools/ToolIsolation.py:3500 appTools/ToolIsolation.py:3507
 #: appTools/ToolMilling.py:2347 appTools/ToolMilling.py:2354
-#: appTools/ToolNCC.py:4454 appTools/ToolNCC.py:4461
+#: appTools/ToolNCC.py:4514 appTools/ToolNCC.py:4521
 #: appTools/ToolOptimal.py:620 appTools/ToolOptimal.py:627
 #: appTools/ToolPaint.py:3273 appTools/ToolPaint.py:3280
 #: appTools/ToolPanelize.py:920 appTools/ToolPanelize.py:927
@@ -1861,8 +1861,8 @@ msgstr "Slot totali"
 #: appEditors/AppExcEditor.py:2003 appObjects/FlatCAMGeometry.py:706
 #: appObjects/FlatCAMGeometry.py:1232 appObjects/FlatCAMGeometry.py:1974
 #: appObjects/FlatCAMGeometry.py:2633 appTools/ToolIsolation.py:1252
-#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1195
-#: appTools/ToolNCC.py:1332 appTools/ToolPaint.py:889
+#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1197
+#: appTools/ToolNCC.py:1334 appTools/ToolPaint.py:889
 #: appTools/ToolPaint.py:1027 appTools/ToolPaint.py:1740
 #: appTools/ToolSolderPaste.py:455 appTools/ToolSolderPaste.py:527
 msgid "Wrong value format entered, use a number."
@@ -1945,7 +1945,7 @@ msgstr "Nome:"
 
 #: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:620
 #: appGUI/ObjectUI.py:967 appTools/ToolIsolation.py:3010
-#: appTools/ToolNCC.py:3813 appTools/ToolPaint.py:2800
+#: appTools/ToolNCC.py:3873 appTools/ToolPaint.py:2800
 #: appTools/ToolSolderPaste.py:1155
 msgid "Tools Table"
 msgstr "Tabella utensili"
@@ -1980,7 +1980,7 @@ msgstr ""
 
 #: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1084
 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
-#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3908
+#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3968
 msgid "Diameter for the new tool"
 msgstr "Diametro del nuovo utensile"
 
@@ -2349,7 +2349,7 @@ msgstr "Arrotondato"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:289
 #: appTools/ToolDrilling.py:2588 appTools/ToolExtractDrills.py:486
 #: appTools/ToolExtractDrills.py:619 appTools/ToolIsolation.py:3430
-#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4288
+#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4348
 #: appTools/ToolPaint.py:3168 appTools/ToolPunchGerber.py:759
 #: appTools/ToolPunchGerber.py:909 appTools/ToolQRCode.py:788
 msgid "Square"
@@ -2396,6 +2396,17 @@ msgstr "Utensile testo"
 msgid "Font"
 msgstr "Font"
 
+#: appEditors/AppGeoEditor.py:313 appEditors/AppGerberEditor.py:2495
+#: appEditors/AppGerberEditor.py:3968 appGUI/ObjectUI.py:316
+#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
+#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
+#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
+#: appTools/ToolFiducials.py:770
+msgid "Size"
+msgstr "Dimensione"
+
 #: appEditors/AppGeoEditor.py:322 appGUI/MainGUI.py:1502
 msgid "Text"
 msgstr "Testo"
@@ -2415,7 +2426,7 @@ msgstr "Utensile testo"
 #: appTools/ToolIsolation.py:697 appTools/ToolIsolation.py:3166
 #: appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
 #: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:329
-#: appTools/ToolNCC.py:2278 appTools/ToolNCC.py:3980 appTools/ToolPaint.py:304
+#: appTools/ToolNCC.py:2280 appTools/ToolNCC.py:4040 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:2940
 msgid "Tool"
 msgstr "Strumenti"
@@ -2542,7 +2553,7 @@ msgstr "Origine"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:256
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
-#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4244
+#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4304
 #: appTools/ToolPaint.py:3097 appTools/ToolTransform.py:557 defaults.py:566
 msgid "Selection"
 msgstr "Selezione"
@@ -2578,7 +2589,7 @@ msgid "A point of reference in format X,Y."
 msgstr "Un punto di riferimento nel formato X,Y."
 
 #: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
-#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2338
+#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2350
 #: appTools/ToolDblSided.py:706 appTools/ToolDblSided.py:892
 #: appTools/ToolNCC.py:63 appTools/ToolPaint.py:137
 #: appTools/ToolSolderPaste.py:160 appTools/ToolSolderPaste.py:1203
@@ -2881,7 +2892,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70
 #: appTools/ToolCalibration.py:881 appTools/ToolDrilling.py:2540
 #: appTools/ToolFilm.py:931 appTools/ToolMilling.py:2218
-#: appTools/ToolNCC.py:3802 appTools/ToolPaint.py:2788
+#: appTools/ToolNCC.py:3862 appTools/ToolPaint.py:2788
 #: appTools/ToolPanelize.py:697 appTools/ToolTransform.py:557
 msgid "Object"
 msgstr "Oggetto"
@@ -3296,7 +3307,7 @@ msgstr "Linea"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290
 #: appTools/ToolDrilling.py:2589 appTools/ToolIsolation.py:3431
-#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4289
+#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4349
 #: appTools/ToolPaint.py:3169
 msgid "Polygon"
 msgstr "Poligono"
@@ -3331,7 +3342,7 @@ msgstr "Fai clic sul punto target."
 msgid "Editing MultiGeo Geometry, tool"
 msgstr "Modifica di Geometria MultiGeo, strumento"
 
-#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2280
+#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2282
 msgid "with diameter"
 msgstr "con diametro"
 
@@ -3559,17 +3570,6 @@ msgstr "Tabella delle aperture per l'oggetto Gerber."
 msgid "Code"
 msgstr "Codice"
 
-#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:316
-#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
-#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
-#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
-#: appTools/ToolFiducials.py:770
-msgid "Size"
-msgstr "Dimensione"
-
 #: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
 #: appGUI/ObjectUI.py:316
 msgid "Dim"
@@ -3672,7 +3672,7 @@ msgstr "Aggiungi una apertura nella lista aperture."
 #: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1132
 #: appObjects/FlatCAMGeometry.py:560 appTools/ToolIsolation.py:70
 #: appTools/ToolIsolation.py:3150 appTools/ToolNCC.py:69
-#: appTools/ToolNCC.py:3964 appTools/ToolPaint.py:143
+#: appTools/ToolNCC.py:4024 appTools/ToolPaint.py:143
 #: appTools/ToolPaint.py:2926 appTools/ToolSolderPaste.py:163
 #: appTools/ToolSolderPaste.py:1209 app_Main.py:6123
 msgid "Delete"
@@ -4091,20 +4091,20 @@ msgid "Open file"
 msgstr "Apri il file"
 
 #: appEditors/AppTextEditor.py:255 appEditors/AppTextEditor.py:260
-#: appObjects/FlatCAMCNCJob.py:1641 appObjects/FlatCAMCNCJob.py:1646
-#: appObjects/FlatCAMCNCJob.py:1831 appObjects/FlatCAMCNCJob.py:1836
-#: appObjects/FlatCAMCNCJob.py:1909 appObjects/FlatCAMCNCJob.py:1914
+#: appObjects/FlatCAMCNCJob.py:1646 appObjects/FlatCAMCNCJob.py:1651
+#: appObjects/FlatCAMCNCJob.py:1836 appObjects/FlatCAMCNCJob.py:1841
+#: appObjects/FlatCAMCNCJob.py:1914 appObjects/FlatCAMCNCJob.py:1919
 #: appTools/ToolSolderPaste.py:1063 app_Main.py:7038 app_Main.py:7043
 msgid "Export Code ..."
 msgstr "Esporta il Codice ..."
 
-#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1663
-#: appObjects/FlatCAMCNCJob.py:1853 appObjects/FlatCAMCNCJob.py:2302
+#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1668
+#: appObjects/FlatCAMCNCJob.py:1858 appObjects/FlatCAMCNCJob.py:2307
 #: appTools/ToolSolderPaste.py:1093
 msgid "No such file or directory"
 msgstr "File o directory inesistente"
 
-#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2316
+#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2321
 msgid "Saved to"
 msgstr "Salvato in"
 
@@ -4128,7 +4128,7 @@ msgstr "Intestazione GCode"
 msgid "Start GCode"
 msgstr "Inizio G-Code"
 
-#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2007
+#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2012
 #: appTools/ToolCalibration.py:447
 msgid "Loaded Machine Code into Code Editor"
 msgstr "Codice macchina caricato nell'editor codice"
@@ -4146,7 +4146,7 @@ msgstr "Diametro"
 
 #: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:999
 #: appGUI/ObjectUI.py:2009 appTools/ToolIsolation.py:3022
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 msgid "TT"
 msgstr "TT"
 
@@ -5182,9 +5182,9 @@ msgstr "Zoom Out"
 msgid "Zoom Fit"
 msgstr "Zoom Tutto"
 
-#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:2067
-msgid "&Command Line"
-msgstr "Riga &Comandi"
+#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:1154
+msgid "Command Line"
+msgstr "Riga di comando"
 
 #: appGUI/MainGUI.py:924 appGUI/MainGUI.py:2079
 msgid "2Sided Tool"
@@ -5476,10 +5476,6 @@ msgstr "(Dis)attiva visualizzazione asse sui canvas"
 msgid "Preferences"
 msgstr "Preferenze"
 
-#: appGUI/MainGUI.py:1154
-msgid "Command Line"
-msgstr "Riga di comando"
-
 #: appGUI/MainGUI.py:1160
 msgid "HUD (Heads up display)"
 msgstr "HUD (Display)"
@@ -5508,11 +5504,18 @@ msgstr ""
 "Misure relative.\n"
 "Il riferimento è la posizione (X=0, Y=0)"
 
+#: appGUI/MainGUI.py:1194
+#, fuzzy
+#| msgid "Show Shell"
+msgid "TCL Shell"
+msgstr "Mostra shell"
+
 #: appGUI/MainGUI.py:1221 appGUI/MainGUI.py:1470 app_Main.py:8143
 msgid "Project"
 msgstr "Progetto"
 
-#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272
+#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272 appGUI/MainGUI.py:3791
+#: appGUI/MainGUI.py:3797
 msgid "Plot Area"
 msgstr "Area Grafica"
 
@@ -5605,7 +5608,7 @@ msgstr "Non salverà le modifiche e chiuderà la finestra delle preferenze."
 msgid "Toggle Visibility"
 msgstr "(Dis)abilita visibilità"
 
-#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2330
+#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2342
 msgid "New"
 msgstr "Nuovo"
 
@@ -5618,8 +5621,8 @@ msgstr "Nuovo"
 #: appTools/ToolDblSided.py:767 appTools/ToolFilm.py:929
 #: appTools/ToolFilm.py:952 appTools/ToolImage.py:136 appTools/ToolImage.py:191
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3338
-#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:803
-#: appTools/ToolNCC.py:3788 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:805
+#: appTools/ToolNCC.py:3848 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:587
@@ -5637,7 +5640,7 @@ msgstr "Geometria"
 #: appTools/ToolDblSided.py:527 appTools/ToolDblSided.py:724
 #: appTools/ToolDblSided.py:766 appTools/ToolFilm.py:1207
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPunchGerber.py:803 appTools/ToolPunchGerber.py:818
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:586
@@ -5754,12 +5757,16 @@ msgstr "Sì"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:148
 #: appTools/ToolDrilling.py:2090 appTools/ToolIsolation.py:3066
-#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3875
+#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3935
 #: appTools/ToolPaint.py:2851 appTranslation.py:113 appTranslation.py:215
 #: app_Main.py:2290 app_Main.py:3385 app_Main.py:5810 app_Main.py:6894
 msgid "No"
 msgstr "No"
 
+#: appGUI/MainGUI.py:2067
+msgid "&Command Line"
+msgstr "Riga &Comandi"
+
 #: appGUI/MainGUI.py:2086
 msgid "&Cutout Tool"
 msgstr "Strumento Ritaglia"
@@ -6493,7 +6500,7 @@ msgstr ""
 "Crea un oggetto Geometria con\n"
 "percorsi utensile per tagliare esternamente i poligoni."
 
-#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4315
+#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4375
 msgid ""
 "Create the Geometry Object\n"
 "for non-copper routing."
@@ -6562,7 +6569,7 @@ msgstr "La geometria risultante avrà angoli arrotondati."
 
 #: appGUI/ObjectUI.py:467 appGUI/ObjectUI.py:507 appTools/ToolCutOut.py:2287
 #: appTools/ToolCutOut.py:2302 appTools/ToolIsolation.py:3444
-#: appTools/ToolNCC.py:4312 appTools/ToolPaint.py:3178
+#: appTools/ToolNCC.py:4372 appTools/ToolPaint.py:3178
 msgid "Generate Geometry"
 msgstr "Genera geometria"
 
@@ -6910,14 +6917,14 @@ msgstr ""
 "taglio e negativo per il taglio 'interno'."
 
 #: appGUI/ObjectUI.py:1079 appTools/ToolIsolation.py:3087
-#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3902 appTools/ToolPaint.py:140
+#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3962 appTools/ToolPaint.py:140
 #: appTools/ToolPaint.py:2878
 msgid "Add from DB"
 msgstr "Aggiungi dal DB"
 
 #: appGUI/ObjectUI.py:1096 appTools/ToolCutOut.py:2071
 #: appTools/ToolIsolation.py:61 appTools/ToolIsolation.py:3122
-#: appTools/ToolNCC.py:3936 appTools/ToolPaint.py:2898
+#: appTools/ToolNCC.py:3996 appTools/ToolPaint.py:2898
 msgid "Search and Add"
 msgstr "Cerca ed aggiungi"
 
@@ -6931,12 +6938,12 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1103 appTools/ToolCutOut.py:2083
 #: appTools/ToolIsolation.py:65 appTools/ToolIsolation.py:3133
-#: appTools/ToolNCC.py:3947 appTools/ToolPaint.py:2909
+#: appTools/ToolNCC.py:4007 appTools/ToolPaint.py:2909
 msgid "Pick from DB"
 msgstr "Prendi dal DB"
 
 #: appGUI/ObjectUI.py:1106 appTools/ToolCutOut.py:2086
-#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:3950
+#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:4010
 #: appTools/ToolPaint.py:2912
 #, fuzzy
 #| msgid ""
@@ -6985,8 +6992,8 @@ msgstr ""
 #: appTools/ToolMilling.py:779 appTools/ToolMilling.py:790
 #: appTools/ToolMilling.py:794 appTools/ToolMilling.py:1711
 #: appTools/ToolNCC.py:271 appTools/ToolNCC.py:276 appTools/ToolNCC.py:306
-#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
-#: appTools/ToolNCC.py:3980 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
+#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
+#: appTools/ToolNCC.py:4040 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
 #: appTools/ToolPaint.py:282 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:316 appTools/ToolPaint.py:655
 #: appTools/ToolPaint.py:2940
@@ -6995,7 +7002,7 @@ msgstr "Parametri per"
 
 #: appGUI/ObjectUI.py:1175 appTools/ToolDrilling.py:2119
 #: appTools/ToolIsolation.py:3169 appTools/ToolMilling.py:1714
-#: appTools/ToolNCC.py:3983 appTools/ToolPaint.py:2943
+#: appTools/ToolNCC.py:4043 appTools/ToolPaint.py:2943
 msgid ""
 "The data used for creating GCode.\n"
 "Each tool store it's own set of such data."
@@ -7147,7 +7154,7 @@ msgstr ""
 msgid "Number of time units for spindle to dwell."
 msgstr "Numero di unità di tempo in cui il mandrino deve aspettare."
 
-#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2128
+#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2140
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333
@@ -7155,7 +7162,7 @@ msgstr "Numero di unità di tempo in cui il mandrino deve aspettare."
 msgid "Probe Z depth"
 msgstr "Tastatore profondità Z"
 
-#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2130
+#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2142
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335
@@ -7174,7 +7181,7 @@ msgstr ""
 msgid "Feedrate Probe"
 msgstr "Velocità avanzamento sonda"
 
-#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2143
+#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2155
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348
@@ -7184,13 +7191,13 @@ msgstr "La velocità usata durante l'avanzamento del tastatore."
 
 #: appGUI/ObjectUI.py:1434 appTools/ToolDrilling.py:2364
 #: appTools/ToolIsolation.py:3265 appTools/ToolMilling.py:2042
-#: appTools/ToolNCC.py:4141 appTools/ToolPaint.py:3049
+#: appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3049
 msgid "Apply parameters to all tools"
 msgstr "Applica parametri a tutti gli utensili"
 
 #: appGUI/ObjectUI.py:1437 appTools/ToolDrilling.py:2367
 #: appTools/ToolIsolation.py:3268 appTools/ToolMilling.py:2045
-#: appTools/ToolNCC.py:4144 appTools/ToolPaint.py:3052
+#: appTools/ToolNCC.py:4204 appTools/ToolPaint.py:3052
 msgid ""
 "The parameters in the current form will be applied\n"
 "on all the tools from the Tool Table."
@@ -7200,13 +7207,13 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1448 appTools/ToolDrilling.py:2378
 #: appTools/ToolIsolation.py:3279 appTools/ToolMilling.py:2056
-#: appTools/ToolNCC.py:4155 appTools/ToolPaint.py:3063
+#: appTools/ToolNCC.py:4215 appTools/ToolPaint.py:3063
 msgid "Common Parameters"
 msgstr "Parametri comuni"
 
 #: appGUI/ObjectUI.py:1450 appTools/ToolDrilling.py:2380
 #: appTools/ToolIsolation.py:3281 appTools/ToolMilling.py:2058
-#: appTools/ToolNCC.py:4157 appTools/ToolPaint.py:3065
+#: appTools/ToolNCC.py:4217 appTools/ToolPaint.py:3065
 msgid "Parameters that are common for all tools."
 msgstr "Parametri usati da tutti gli utensili."
 
@@ -7407,7 +7414,7 @@ msgstr "Aggiungi un'area di esclusione."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286
 #: appTools/ToolDrilling.py:2591 appTools/ToolIsolation.py:3427
-#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4285
+#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4345
 #: appTools/ToolPaint.py:3165
 msgid "The kind of selection shape used for area selection."
 msgstr "Il tipo di forma di selezione utilizzata per la selezione dell'area."
@@ -7640,52 +7647,52 @@ msgstr ""
 msgid "Autolevelling"
 msgstr "Autolivellamento"
 
-#: appGUI/ObjectUI.py:2052
+#: appGUI/ObjectUI.py:2053
 msgid "Enable the autolevelling feature."
 msgstr "Abilita la funzionalità di autolivellamento."
 
-#: appGUI/ObjectUI.py:2069
+#: appGUI/ObjectUI.py:2081
 msgid "Probe Points Table"
 msgstr "Tabella punti di probe"
 
-#: appGUI/ObjectUI.py:2070
+#: appGUI/ObjectUI.py:2082
 msgid "Generate GCode that will obtain the height map"
 msgstr "Genera GCode con mappa di altezza"
 
-#: appGUI/ObjectUI.py:2072
+#: appGUI/ObjectUI.py:2084
 msgid "Show"
 msgstr "Mostra"
 
-#: appGUI/ObjectUI.py:2073
+#: appGUI/ObjectUI.py:2085
 msgid "Toggle the display of the Probe Points table."
 msgstr "(Dis)attiva visualizzazione tabella punti di probe."
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 msgid "X-Y Coordinates"
 msgstr "Coordinate X-Y"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 msgid "Height"
 msgstr "Altezza"
 
-#: appGUI/ObjectUI.py:2090
+#: appGUI/ObjectUI.py:2102
 #, fuzzy
 #| msgid "Plot Options"
 msgid "Plot probing points"
 msgstr "Opzioni disegno"
 
-#: appGUI/ObjectUI.py:2092
+#: appGUI/ObjectUI.py:2104
 msgid ""
 "Plot the probing points in the table.\n"
 "If a Voronoi method is used then\n"
 "the Voronoi areas are also plotted."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2107
+#: appGUI/ObjectUI.py:2119
 msgid "Probe GCode Generation"
 msgstr "Generazione GCode di probing"
 
-#: appGUI/ObjectUI.py:2109
+#: appGUI/ObjectUI.py:2121
 msgid ""
 "Will create a GCode which will be sent to the controller,\n"
 "either through a file or directly, with the intent to get the height map\n"
@@ -7695,27 +7702,27 @@ msgstr ""
 "oppure ad un file o direttamente, con il fine di avere una mappa di altezza\n"
 "per modificare il GCode originale per livellare l'altezza di taglio."
 
-#: appGUI/ObjectUI.py:2116
+#: appGUI/ObjectUI.py:2128
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
 msgid "Probe Z travel"
 msgstr "Spostamento Probe Z"
 
-#: appGUI/ObjectUI.py:2118
+#: appGUI/ObjectUI.py:2130
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
 msgid "The safe Z for probe travelling between probe points."
 msgstr "Altezza (Z) per gli spostamenti fra due punti di probe."
 
-#: appGUI/ObjectUI.py:2141
+#: appGUI/ObjectUI.py:2153
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
 msgid "Probe Feedrate"
 msgstr "Avanzamento Probe"
 
-#: appGUI/ObjectUI.py:2158
+#: appGUI/ObjectUI.py:2170
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
 msgid "Mode"
 msgstr "Modalità"
 
-#: appGUI/ObjectUI.py:2159
+#: appGUI/ObjectUI.py:2171
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
 msgid ""
 "Choose a mode for height map generation.\n"
@@ -7726,19 +7733,19 @@ msgstr ""
 "- Manuale: selezione di punti di probe con dei clic sul disegno\n"
 "- Griglia: genererà automaticamente una griglia di punti di probe"
 
-#: appGUI/ObjectUI.py:2165
+#: appGUI/ObjectUI.py:2177
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
 #: appTools/ToolCutOut.py:2324 appTools/ToolFiducials.py:801
 msgid "Manual"
 msgstr "Manuale"
 
-#: appGUI/ObjectUI.py:2166
+#: appGUI/ObjectUI.py:2178
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
 msgid "Grid"
 msgstr "Griglia"
 
-#: appGUI/ObjectUI.py:2173
+#: appGUI/ObjectUI.py:2185
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
 msgid ""
 "Choose a method for approximation of heights from autolevelling data.\n"
@@ -7746,52 +7753,52 @@ msgid ""
 "- Bilinear: will use bilinear interpolation. Usable only for grid mode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2179
+#: appGUI/ObjectUI.py:2191
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
 msgid "Voronoi"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2180
+#: appGUI/ObjectUI.py:2192
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
 #, fuzzy
 #| msgid "Linear"
 msgid "Bilinear"
 msgstr "Lineare"
 
-#: appGUI/ObjectUI.py:2193
+#: appGUI/ObjectUI.py:2205
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
 #: appTools/ToolPanelize.py:787
 msgid "Columns"
 msgstr "Colonne"
 
-#: appGUI/ObjectUI.py:2195
+#: appGUI/ObjectUI.py:2207
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
 msgid "The number of grid columns."
 msgstr "Numero di colonne della griglia."
 
-#: appGUI/ObjectUI.py:2204
+#: appGUI/ObjectUI.py:2216
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
 #: appTools/ToolPanelize.py:797
 msgid "Rows"
 msgstr "Righe"
 
-#: appGUI/ObjectUI.py:2206
+#: appGUI/ObjectUI.py:2218
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
 msgid "The number of gird rows."
 msgstr "Numero di righe della griglia."
 
-#: appGUI/ObjectUI.py:2211
+#: appGUI/ObjectUI.py:2223
 msgid "Add Probe Points"
 msgstr "Aggiungi punti di probe"
 
-#: appGUI/ObjectUI.py:2219
+#: appGUI/ObjectUI.py:2231
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
 msgid "Controller"
 msgstr "Controller"
 
-#: appGUI/ObjectUI.py:2221
+#: appGUI/ObjectUI.py:2233
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
 msgid ""
 "The kind of controller for which to generate\n"
@@ -7800,147 +7807,147 @@ msgstr ""
 "Tipo di controller per cui generare\n"
 "il GCode della mappa altezza."
 
-#: appGUI/ObjectUI.py:2267 appGUI/ObjectUI.py:2282
-#: appObjects/FlatCAMCNCJob.py:1302 appObjects/FlatCAMCNCJob.py:1324
+#: appGUI/ObjectUI.py:2279 appGUI/ObjectUI.py:2294
+#: appObjects/FlatCAMCNCJob.py:1307 appObjects/FlatCAMCNCJob.py:1329
 msgid "Control"
 msgstr "Controllo"
 
-#: appGUI/ObjectUI.py:2277 appGUI/ObjectUI.py:2284
-#: appObjects/FlatCAMCNCJob.py:1304 appObjects/FlatCAMCNCJob.py:1326
+#: appGUI/ObjectUI.py:2289 appGUI/ObjectUI.py:2296
+#: appObjects/FlatCAMCNCJob.py:1309 appObjects/FlatCAMCNCJob.py:1331
 msgid "Sender"
 msgstr "Mittente"
 
-#: appGUI/ObjectUI.py:2298
+#: appGUI/ObjectUI.py:2310
 msgid "COM list"
 msgstr "Lista COM"
 
-#: appGUI/ObjectUI.py:2300 appGUI/ObjectUI.py:2315
+#: appGUI/ObjectUI.py:2312 appGUI/ObjectUI.py:2327
 msgid "Lists the available serial ports."
 msgstr "Lista delle porte seriali disponibili."
 
-#: appGUI/ObjectUI.py:2304
+#: appGUI/ObjectUI.py:2316
 msgid "Search"
 msgstr "Cerca"
 
-#: appGUI/ObjectUI.py:2306
+#: appGUI/ObjectUI.py:2318
 msgid "Search for the available serial ports."
 msgstr "Cerca per porte seriali disponibili."
 
-#: appGUI/ObjectUI.py:2313
+#: appGUI/ObjectUI.py:2325
 msgid "Baud rates"
 msgstr "Baud rate"
 
-#: appGUI/ObjectUI.py:2332
+#: appGUI/ObjectUI.py:2344
 msgid "New, custom baudrate."
 msgstr "Nuovo Baudrate o personalizzato."
 
-#: appGUI/ObjectUI.py:2340
+#: appGUI/ObjectUI.py:2352
 msgid "Add the specified custom baudrate to the list."
 msgstr "Aggiungi il baudrate selezionato alla lista."
 
-#: appGUI/ObjectUI.py:2346
+#: appGUI/ObjectUI.py:2358
 msgid "Delete selected baudrate"
 msgstr "Cancella baudrate selezionato"
 
-#: appGUI/ObjectUI.py:2350
+#: appGUI/ObjectUI.py:2362
 msgid "Reset"
 msgstr "Reset"
 
-#: appGUI/ObjectUI.py:2352
+#: appGUI/ObjectUI.py:2364
 msgid "Software reset of the controller."
 msgstr "Reset software del controller."
 
-#: appGUI/ObjectUI.py:2358 appObjects/FlatCAMCNCJob.py:1318
+#: appGUI/ObjectUI.py:2370 appObjects/FlatCAMCNCJob.py:1323
 msgid "Disconnected"
 msgstr "Disconnetti"
 
-#: appGUI/ObjectUI.py:2360
+#: appGUI/ObjectUI.py:2372
 msgid "Connect to the selected port with the selected baud rate."
 msgstr "Collegamento alla porta selezionata con il baudrate desiderato."
 
-#: appGUI/ObjectUI.py:2385
+#: appGUI/ObjectUI.py:2397
 msgid "Jog"
 msgstr "Jog"
 
-#: appGUI/ObjectUI.py:2393
+#: appGUI/ObjectUI.py:2405
 msgid "Zero Axes"
 msgstr "Azzera assi"
 
-#: appGUI/ObjectUI.py:2426
+#: appGUI/ObjectUI.py:2438
 msgid "Pause/Resume"
 msgstr "Pausa/Riprendi"
 
-#: appGUI/ObjectUI.py:2448
+#: appGUI/ObjectUI.py:2460
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
 msgid "Step"
 msgstr "Passo"
 
-#: appGUI/ObjectUI.py:2450
+#: appGUI/ObjectUI.py:2462
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
 msgid "Each jog action will move the axes with this value."
 msgstr "Ogni azione di jog sposterà gli assi con questo valore."
 
-#: appGUI/ObjectUI.py:2462
+#: appGUI/ObjectUI.py:2474
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89
 #: appObjects/FlatCAMObj.py:831 appTools/ToolProperties.py:529
 msgid "Feedrate"
 msgstr "Avanzamento"
 
-#: appGUI/ObjectUI.py:2464
+#: appGUI/ObjectUI.py:2476
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
 msgid "Feedrate when jogging."
 msgstr "Feedrate durante il Jog."
 
-#: appGUI/ObjectUI.py:2484
+#: appGUI/ObjectUI.py:2496
 msgid "Send Command"
 msgstr "Invia comando"
 
-#: appGUI/ObjectUI.py:2486 appGUI/ObjectUI.py:2496
+#: appGUI/ObjectUI.py:2498 appGUI/ObjectUI.py:2508
 msgid "Send a custom command to GRBL."
 msgstr "Invia un comando custom al controller GRBL."
 
-#: appGUI/ObjectUI.py:2491
+#: appGUI/ObjectUI.py:2503
 msgid "Type GRBL command ..."
 msgstr "Digita comando GRBL ..."
 
-#: appGUI/ObjectUI.py:2494
+#: appGUI/ObjectUI.py:2506
 msgid "Send"
 msgstr "Invia"
 
-#: appGUI/ObjectUI.py:2502
+#: appGUI/ObjectUI.py:2514
 msgid "Get Config parameter"
 msgstr "Leggi parametro di configurazione"
 
-#: appGUI/ObjectUI.py:2504
+#: appGUI/ObjectUI.py:2516
 msgid "A GRBL configuration parameter."
 msgstr "Parametro di configurazione GRBL."
 
-#: appGUI/ObjectUI.py:2509
+#: appGUI/ObjectUI.py:2521
 msgid "Type GRBL parameter ..."
 msgstr "Digita parametro GRBL ..."
 
-#: appGUI/ObjectUI.py:2512
+#: appGUI/ObjectUI.py:2524
 msgid "Get"
 msgstr "Leggi"
 
-#: appGUI/ObjectUI.py:2514
+#: appGUI/ObjectUI.py:2526
 msgid "Get the value of a specified GRBL parameter."
 msgstr "Leggi il valore di un parametro GRBL specifico."
 
-#: appGUI/ObjectUI.py:2522
+#: appGUI/ObjectUI.py:2534
 msgid "Get Report"
 msgstr "Ricevi report"
 
-#: appGUI/ObjectUI.py:2524
+#: appGUI/ObjectUI.py:2536
 msgid "Print in shell the GRBL report."
 msgstr "Scrivi nella shell il report GRBL."
 
-#: appGUI/ObjectUI.py:2530
+#: appGUI/ObjectUI.py:2542
 msgid "Apply AutoLevelling"
 msgstr "Applica autolivellamento"
 
-#: appGUI/ObjectUI.py:2532
+#: appGUI/ObjectUI.py:2544
 msgid ""
 "Will send the probing GCode to the GRBL controller,\n"
 "wait for the Z probing data and then apply this data\n"
@@ -7950,30 +7957,30 @@ msgstr ""
 "attende i dati di probe Z e quindi applica questi dati\n"
 "al GCode originale effettuando quindi l'autolivellamento."
 
-#: appGUI/ObjectUI.py:2541
+#: appGUI/ObjectUI.py:2553
 msgid "Will save the GRBL height map."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2551
+#: appGUI/ObjectUI.py:2563
 msgid "Save Probing GCode"
 msgstr "Salva GCode di probing"
 
-#: appGUI/ObjectUI.py:2553
+#: appGUI/ObjectUI.py:2565
 #, fuzzy
 #| msgid "View/Edit the probing GCode."
 msgid "Will save the probing GCode."
 msgstr "Vedi/Modifica GCode probing."
 
-#: appGUI/ObjectUI.py:2562
+#: appGUI/ObjectUI.py:2574
 msgid "View/Edit the probing GCode."
 msgstr "Vedi/Modifica GCode probing."
 
-#: appGUI/ObjectUI.py:2569 appObjects/FlatCAMCNCJob.py:1735
-#: appObjects/FlatCAMCNCJob.py:1739
+#: appGUI/ObjectUI.py:2581 appObjects/FlatCAMCNCJob.py:1740
+#: appObjects/FlatCAMCNCJob.py:1744
 msgid "Import Height Map"
 msgstr "Importa Mappa altezze"
 
-#: appGUI/ObjectUI.py:2571
+#: appGUI/ObjectUI.py:2583
 msgid ""
 "Import the file that has the Z heights\n"
 "obtained through probing and then apply this data\n"
@@ -7984,11 +7991,11 @@ msgstr ""
 "ottenute tramite probing e le applica\n"
 "al GCode originale per l'autolivellamento."
 
-#: appGUI/ObjectUI.py:2589
+#: appGUI/ObjectUI.py:2601
 msgid "Export CNC Code"
 msgstr "Esporta codice CNC"
 
-#: appGUI/ObjectUI.py:2591
+#: appGUI/ObjectUI.py:2603
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
 msgid ""
@@ -7998,11 +8005,11 @@ msgstr ""
 "Esporta e salva il G-Code per\n"
 "fare un file dell'oggetto."
 
-#: appGUI/ObjectUI.py:2600
+#: appGUI/ObjectUI.py:2612
 msgid "Save CNC Code"
 msgstr "Calva codice CNC"
 
-#: appGUI/ObjectUI.py:2603
+#: appGUI/ObjectUI.py:2615
 msgid ""
 "Opens dialog to save G-Code\n"
 "file."
@@ -8010,80 +8017,80 @@ msgstr ""
 "Apri la finestra di salvataggio del file\n"
 "G-Code."
 
-#: appGUI/ObjectUI.py:2610
+#: appGUI/ObjectUI.py:2622
 msgid "Review CNC Code."
 msgstr "Controlla codice CNC."
 
-#: appGUI/ObjectUI.py:2671
+#: appGUI/ObjectUI.py:2683
 msgid "Script Object"
 msgstr "Oggetto script"
 
-#: appGUI/ObjectUI.py:2691 appGUI/ObjectUI.py:2765
+#: appGUI/ObjectUI.py:2703 appGUI/ObjectUI.py:2777
 msgid "Auto Completer"
 msgstr "Auto completatore"
 
-#: appGUI/ObjectUI.py:2693
+#: appGUI/ObjectUI.py:2705
 msgid "This selects if the auto completer is enabled in the Script Editor."
 msgstr "Seleziona se l'autocompletatore è attivo nell'editor Script."
 
-#: appGUI/ObjectUI.py:2738
+#: appGUI/ObjectUI.py:2750
 msgid "Document Object"
 msgstr "Oggetto documento"
 
-#: appGUI/ObjectUI.py:2767
+#: appGUI/ObjectUI.py:2779
 msgid "This selects if the auto completer is enabled in the Document Editor."
 msgstr "Seleziona se l'autocompletatore è attivo nell'editor Documenti."
 
-#: appGUI/ObjectUI.py:2785
+#: appGUI/ObjectUI.py:2797
 msgid "Font Type"
 msgstr "Tipo carattere"
 
-#: appGUI/ObjectUI.py:2802
+#: appGUI/ObjectUI.py:2814
 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
 msgid "Font Size"
 msgstr "Dimensione carattere"
 
-#: appGUI/ObjectUI.py:2838
+#: appGUI/ObjectUI.py:2850
 msgid "Alignment"
 msgstr "Allineamento"
 
-#: appGUI/ObjectUI.py:2843
+#: appGUI/ObjectUI.py:2855
 msgid "Align Left"
 msgstr "Allinea a sinistra"
 
-#: appGUI/ObjectUI.py:2848 app_Main.py:4993
+#: appGUI/ObjectUI.py:2860 app_Main.py:4993
 msgid "Center"
 msgstr "Centro"
 
-#: appGUI/ObjectUI.py:2853
+#: appGUI/ObjectUI.py:2865
 msgid "Align Right"
 msgstr "Allinea a destra"
 
-#: appGUI/ObjectUI.py:2858
+#: appGUI/ObjectUI.py:2870
 msgid "Justify"
 msgstr "Giustifica"
 
-#: appGUI/ObjectUI.py:2865
+#: appGUI/ObjectUI.py:2877
 msgid "Font Color"
 msgstr "Colore carattere"
 
-#: appGUI/ObjectUI.py:2867
+#: appGUI/ObjectUI.py:2879
 msgid "Set the font color for the selected text"
 msgstr "Imposta il colore del carattere per il testo selezionato"
 
-#: appGUI/ObjectUI.py:2881
+#: appGUI/ObjectUI.py:2893
 msgid "Selection Color"
 msgstr "Selezione colore"
 
-#: appGUI/ObjectUI.py:2883
+#: appGUI/ObjectUI.py:2895
 msgid "Set the selection color when doing text selection."
 msgstr "Imposta il colore della selezione durante la selezione del testo."
 
-#: appGUI/ObjectUI.py:2897
+#: appGUI/ObjectUI.py:2909
 msgid "Tab Size"
 msgstr "Dimensione tab"
 
-#: appGUI/ObjectUI.py:2899
+#: appGUI/ObjectUI.py:2911
 msgid "Set the tab size. In pixels. Default value is 80 pixels."
 msgstr ""
 "Imposta la dimensione del tab. In pixel. Il valore di default è 80 pixel."
@@ -10203,10 +10210,10 @@ msgstr "\"Segui\""
 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64
 #: appObjects/FlatCAMGerber.py:370 appTools/ToolCopperThieving.py:581
 #: appTools/ToolCopperThieving.py:770 appTools/ToolCopperThieving.py:782
-#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1791
-#: appTools/ToolNCC.py:1818 appTools/ToolNCC.py:1926 appTools/ToolNCC.py:1939
-#: appTools/ToolNCC.py:2785 appTools/ToolNCC.py:2890 appTools/ToolNCC.py:2905
-#: appTools/ToolNCC.py:3171 appTools/ToolNCC.py:3272 appTools/ToolNCC.py:3287
+#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1793
+#: appTools/ToolNCC.py:1820 appTools/ToolNCC.py:1928 appTools/ToolNCC.py:1941
+#: appTools/ToolNCC.py:2845 appTools/ToolNCC.py:2950 appTools/ToolNCC.py:2965
+#: appTools/ToolNCC.py:3231 appTools/ToolNCC.py:3332 appTools/ToolNCC.py:3347
 #: camlib.py:1113
 msgid "Buffering"
 msgstr "Riempimento"
@@ -10529,9 +10536,9 @@ msgstr ""
 
 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
-#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1349
-#: appTools/ToolNCC.py:1665 appTools/ToolNCC.py:1729 appTools/ToolNCC.py:2649
-#: appTools/ToolNCC.py:2658 appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4376
+#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1351
+#: appTools/ToolNCC.py:1667 appTools/ToolNCC.py:1731 appTools/ToolNCC.py:2709
+#: appTools/ToolNCC.py:2718 appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4436
 #: defaults.py:475 tclCommands/TclCommandCopperClear.py:190
 msgid "Itself"
 msgstr "Stesso"
@@ -10542,8 +10549,8 @@ msgstr "Stesso"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1219 appTools/ToolIsolation.py:819
 #: appTools/ToolIsolation.py:1435 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1363 appTools/ToolNCC.py:1681 appTools/ToolNCC.py:1736
-#: appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4386 appTools/ToolPaint.py:1061
+#: appTools/ToolNCC.py:1365 appTools/ToolNCC.py:1683 appTools/ToolNCC.py:1738
+#: appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4446 appTools/ToolPaint.py:1061
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3249
 msgid "Area Selection"
 msgstr "Selezione Area"
@@ -10554,9 +10561,9 @@ msgstr "Selezione Area"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1220 appTools/ToolDblSided.py:757
 #: appTools/ToolIsolation.py:1475 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1382 appTools/ToolNCC.py:1687 appTools/ToolNCC.py:1744
-#: appTools/ToolNCC.py:2122 appTools/ToolNCC.py:2356 appTools/ToolNCC.py:2694
-#: appTools/ToolNCC.py:4240 appTools/ToolPaint.py:1080
+#: appTools/ToolNCC.py:1384 appTools/ToolNCC.py:1689 appTools/ToolNCC.py:1746
+#: appTools/ToolNCC.py:2124 appTools/ToolNCC.py:2358 appTools/ToolNCC.py:2754
+#: appTools/ToolNCC.py:4300 appTools/ToolPaint.py:1080
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3232
 #: tclCommands/TclCommandCopperClear.py:192 tclCommands/TclCommandPaint.py:166
 msgid "Reference Object"
@@ -11878,7 +11885,7 @@ msgstr "Crea CNCJob con percorsi per la foratura e fresatura fori."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:140
 #: appTools/ToolDrilling.py:2082 appTools/ToolIsolation.py:3058
-#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3867
+#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3927
 #: appTools/ToolPaint.py:2843
 msgid "Tool order"
 msgstr "Ordine utensili"
@@ -11889,8 +11896,8 @@ msgstr "Ordine utensili"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141
 #: appTools/ToolDrilling.py:2083 appTools/ToolIsolation.py:3059
-#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3868
-#: appTools/ToolNCC.py:3878 appTools/ToolPaint.py:2844
+#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3928
+#: appTools/ToolNCC.py:3938 appTools/ToolPaint.py:2844
 #: appTools/ToolPaint.py:2854
 msgid ""
 "This set the way that the tools in the tools table are used.\n"
@@ -11918,7 +11925,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:149
 #: appTools/ToolDrilling.py:2091 appTools/ToolIsolation.py:3067
-#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3876
+#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3936
 #: appTools/ToolPaint.py:2852
 msgid "Forward"
 msgstr "Avanti"
@@ -11928,7 +11935,7 @@ msgstr "Avanti"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150
 #: appTools/ToolDrilling.py:2092 appTools/ToolIsolation.py:3068
-#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3877
+#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3937
 #: appTools/ToolPaint.py:2853
 msgid "Reverse"
 msgstr "Indietro"
@@ -12289,7 +12296,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:242
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243
-#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4162
+#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4222
 #: appTools/ToolPaint.py:3069
 msgid "Rest"
 msgstr "Ripresa"
@@ -12342,13 +12349,13 @@ msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:350
-#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4298
+#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4358
 msgid "Check validity"
 msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:352
-#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4300
+#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4360
 #, fuzzy
 #| msgid ""
 #| "Find a tool diameter that is guaranteed\n"
@@ -12479,7 +12486,7 @@ msgstr ""
 "lavorazioni di rame.\n"
 "Il valore può essere compreso tra 0.0 e 9999.9 unità FlatCAM."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4166
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4226
 msgid ""
 "If checked, use 'rest machining'.\n"
 "Basically it will clear copper outside PCB features,\n"
@@ -12498,7 +12505,7 @@ msgstr ""
 "ci sono più strumenti.\n"
 "Se non selezionato, usa l'algoritmo standard."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4246
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4306
 msgid ""
 "Selection of area to be processed.\n"
 "- 'Itself' - the processing extent is based on the object that is "
@@ -12641,7 +12648,7 @@ msgstr "Numero di righe nel pannello desiderato"
 #: appTools/ToolFilm.py:951 appTools/ToolImage.py:117 appTools/ToolImage.py:138
 #: appTools/ToolImage.py:191 appTools/ToolIsolation.py:802
 #: appTools/ToolIsolation.py:3339 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:3789 appTools/ToolNCC.py:4263
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:3849 appTools/ToolNCC.py:4323
 #: appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
 #: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167
 #: appTools/ToolPanelize.py:715 appTools/ToolPanelize.py:809
@@ -13165,31 +13172,31 @@ msgstr ""
 msgid "created/selected"
 msgstr "creato/selezionato"
 
-#: appObjects/FlatCAMCNCJob.py:637 appObjects/FlatCAMDocument.py:71
+#: appObjects/FlatCAMCNCJob.py:642 appObjects/FlatCAMDocument.py:71
 #: appObjects/FlatCAMScript.py:82
 msgid "<span style=\"color:green;\"><b>Basic</b></span>"
 msgstr "<span style=\"color:green;\"><b>Base</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:644 appObjects/FlatCAMDocument.py:75
+#: appObjects/FlatCAMCNCJob.py:649 appObjects/FlatCAMDocument.py:75
 #: appObjects/FlatCAMScript.py:86
 msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
 msgstr "<span style=\"color:red;\"><b>Advanzato</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:780 appObjects/FlatCAMCNCJob.py:1058
+#: appObjects/FlatCAMCNCJob.py:785 appObjects/FlatCAMCNCJob.py:1063
 msgid ""
 "Voronoi function can not be loaded.\n"
 "Shapely >= 1.8 is required"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:808
+#: appObjects/FlatCAMCNCJob.py:813
 msgid "Click on canvas to add a Probe Point..."
 msgstr "Clicca sul disegno per aggiungere un punto di probe..."
 
-#: appObjects/FlatCAMCNCJob.py:1004
+#: appObjects/FlatCAMCNCJob.py:1009
 msgid "Point is not within the object area. Choose another point."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1024
+#: appObjects/FlatCAMCNCJob.py:1029
 msgid ""
 "Added a Probe Point... Click again to add another or right click to "
 "finish ..."
@@ -13197,117 +13204,117 @@ msgstr ""
 "Punto di probe aggiunto. Clicca nuovamente per aggiungerne un altro o clicca "
 "col destro per terminare..."
 
-#: appObjects/FlatCAMCNCJob.py:1046
+#: appObjects/FlatCAMCNCJob.py:1051
 msgid "Finished adding Probe Points..."
 msgstr "Aggiunta di punti probe tyerminata..."
 
-#: appObjects/FlatCAMCNCJob.py:1260
+#: appObjects/FlatCAMCNCJob.py:1265
 msgid "COM list updated ..."
 msgstr "Lista COM aggiornata ..."
 
-#: appObjects/FlatCAMCNCJob.py:1296
+#: appObjects/FlatCAMCNCJob.py:1301
 msgid "Connected"
 msgstr "Connesso"
 
-#: appObjects/FlatCAMCNCJob.py:1307
+#: appObjects/FlatCAMCNCJob.py:1312
 msgid "Port connected"
 msgstr "Porta connessa"
 
-#: appObjects/FlatCAMCNCJob.py:1311
+#: appObjects/FlatCAMCNCJob.py:1316
 msgid "Could not connect to GRBL on port"
 msgstr "Impossibile connettersi a GRBL sulla porta"
 
-#: appObjects/FlatCAMCNCJob.py:1328
+#: appObjects/FlatCAMCNCJob.py:1333
 msgid "Port is connected. Disconnecting"
 msgstr "Porta connessa. Disconnessione in corso"
 
-#: appObjects/FlatCAMCNCJob.py:1330
+#: appObjects/FlatCAMCNCJob.py:1335
 msgid "Could not connect to port"
 msgstr "Non posso connettermi alla porta"
 
-#: appObjects/FlatCAMCNCJob.py:1360 appObjects/FlatCAMCNCJob.py:1790
+#: appObjects/FlatCAMCNCJob.py:1365 appObjects/FlatCAMCNCJob.py:1795
 msgid "Sending GCode..."
 msgstr "Invio GCode..."
 
-#: appObjects/FlatCAMCNCJob.py:1489
+#: appObjects/FlatCAMCNCJob.py:1494
 msgid "GRBL is doing a home cycle."
 msgstr "GRBL sta eseguendo un ciclo di homing."
 
-#: appObjects/FlatCAMCNCJob.py:1495
+#: appObjects/FlatCAMCNCJob.py:1500
 msgid "GRBL software reset was sent."
 msgstr "Rest software a GRBL inviato."
 
-#: appObjects/FlatCAMCNCJob.py:1503
+#: appObjects/FlatCAMCNCJob.py:1508
 msgid "GRBL resumed."
 msgstr "GRBL ripristinato."
 
-#: appObjects/FlatCAMCNCJob.py:1507
+#: appObjects/FlatCAMCNCJob.py:1512
 msgid "GRBL paused."
 msgstr "GRBL in pausa."
 
-#: appObjects/FlatCAMCNCJob.py:1649 appObjects/FlatCAMCNCJob.py:1839
-#: appObjects/FlatCAMCNCJob.py:1924 appTools/ToolSolderPaste.py:1066
+#: appObjects/FlatCAMCNCJob.py:1654 appObjects/FlatCAMCNCJob.py:1844
+#: appObjects/FlatCAMCNCJob.py:1929 appTools/ToolSolderPaste.py:1066
 msgid "Export cancelled ..."
 msgstr "Esportazione annullata ..."
 
-#: appObjects/FlatCAMCNCJob.py:1673 appObjects/FlatCAMCNCJob.py:1960
+#: appObjects/FlatCAMCNCJob.py:1678 appObjects/FlatCAMCNCJob.py:1965
 #: appObjects/FlatCAMScript.py:134 app_Main.py:7824
 msgid "Loading..."
 msgstr "Caricamento..."
 
-#: appObjects/FlatCAMCNCJob.py:1677
+#: appObjects/FlatCAMCNCJob.py:1682
 msgid "There is nothing to view"
 msgstr "Niente da visualizzare"
 
-#: appObjects/FlatCAMCNCJob.py:1683
+#: appObjects/FlatCAMCNCJob.py:1688
 msgid "Code Viewer"
 msgstr "Visualizzatore Codice"
 
-#: appObjects/FlatCAMCNCJob.py:1721
+#: appObjects/FlatCAMCNCJob.py:1726
 msgid "Loaded Machine Code into Code Viewer"
 msgstr "Codice macchina caricato nel visualizzatore di codice"
 
-#: appObjects/FlatCAMCNCJob.py:1766
+#: appObjects/FlatCAMCNCJob.py:1771
 msgid "Failed to open height map file"
 msgstr "Errore nell'apertura del file mappa di altezze"
 
-#: appObjects/FlatCAMCNCJob.py:1816
+#: appObjects/FlatCAMCNCJob.py:1821
 msgid "Finished probing. Doing the autolevelling."
 msgstr "Probing terminato. Esecuzione autolivellamento."
 
-#: appObjects/FlatCAMCNCJob.py:1821
+#: appObjects/FlatCAMCNCJob.py:1826
 msgid "Sending probing GCode to the GRBL controller."
 msgstr "Invio GCode di probing al controller GRBL."
 
-#: appObjects/FlatCAMCNCJob.py:1862
+#: appObjects/FlatCAMCNCJob.py:1867
 msgid "Empty GRBL heightmap."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1866
+#: appObjects/FlatCAMCNCJob.py:1871
 msgid "Finished autolevelling."
 msgstr "Autolivellamento terminato..."
 
-#: appObjects/FlatCAMCNCJob.py:1880
+#: appObjects/FlatCAMCNCJob.py:1885
 msgid "Plotting..."
 msgstr "Sto disegnando..."
 
-#: appObjects/FlatCAMCNCJob.py:1950
+#: appObjects/FlatCAMCNCJob.py:1955
 msgid "File saved to"
 msgstr "File salvato in"
 
-#: appObjects/FlatCAMCNCJob.py:1974
+#: appObjects/FlatCAMCNCJob.py:1979
 msgid "Code Review"
 msgstr "Visualizzatore codice"
 
-#: appObjects/FlatCAMCNCJob.py:2157
+#: appObjects/FlatCAMCNCJob.py:2162
 msgid "This CNCJob object can't be processed because it is a"
 msgstr "Questo oggetto CNCJob non può essere processato perché è"
 
-#: appObjects/FlatCAMCNCJob.py:2159
+#: appObjects/FlatCAMCNCJob.py:2164
 msgid "CNCJob object"
 msgstr "Oggetto CNCJob"
 
-#: appObjects/FlatCAMCNCJob.py:2269
+#: appObjects/FlatCAMCNCJob.py:2274
 msgid ""
 "G-code does not have a G94 code.\n"
 "Append Code snippet will not be used.."
@@ -13370,7 +13377,7 @@ msgstr "Finito"
 #: appTools/ToolIsolation.py:531 appTools/ToolIsolation.py:644
 #: appTools/ToolIsolation.py:710 appTools/ToolMilling.py:628
 #: appTools/ToolMilling.py:749 appTools/ToolMilling.py:794
-#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
+#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
 #: appTools/ToolPaint.py:252 appTools/ToolPaint.py:316
 #: appTools/ToolPaint.py:655
 msgid "Multiple Tools"
@@ -13552,7 +13559,7 @@ msgstr "L'operazione non può essere eseguita."
 
 #: appObjects/FlatCAMGerber.py:558 appObjects/FlatCAMGerber.py:632
 #: appTools/ToolIsolation.py:1583 appTools/ToolIsolation.py:1951
-#: appTools/ToolNCC.py:1854 appTools/ToolNCC.py:2819 appTools/ToolNCC.py:3198
+#: appTools/ToolNCC.py:1856 appTools/ToolNCC.py:2879 appTools/ToolNCC.py:3258
 msgid "Isolation geometry could not be generated."
 msgstr "Geometria di isolamento non può essere generata."
 
@@ -13965,7 +13972,7 @@ msgstr ""
 #: appTools/ToolEtchCompensation.py:458 appTools/ToolExtractDrills.py:702
 #: appTools/ToolFiducials.py:932 appTools/ToolFilm.py:1383
 #: appTools/ToolInvertGerber.py:286 appTools/ToolIsolation.py:3477
-#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4328
+#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4388
 #: appTools/ToolOptimal.py:593 appTools/ToolPaint.py:3194
 #: appTools/ToolPanelize.py:889 appTools/ToolPunchGerber.py:993
 #: appTools/ToolQRCode.py:904 appTools/ToolRulesCheck.py:1618
@@ -13981,7 +13988,7 @@ msgstr "Azzera strumento"
 #: appTools/ToolEtchCompensation.py:461 appTools/ToolExtractDrills.py:705
 #: appTools/ToolFiducials.py:935 appTools/ToolFilm.py:1386
 #: appTools/ToolInvertGerber.py:289 appTools/ToolIsolation.py:3480
-#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4331
+#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4391
 #: appTools/ToolOptimal.py:596 appTools/ToolPaint.py:3197
 #: appTools/ToolPanelize.py:892 appTools/ToolPunchGerber.py:996
 #: appTools/ToolQRCode.py:907 appTools/ToolRulesCheck.py:1621
@@ -14421,8 +14428,8 @@ msgstr "Strumento Copper Thieving fatto."
 #: appTools/ToolIsolation.py:908 appTools/ToolIsolation.py:1345
 #: appTools/ToolIsolation.py:1372 appTools/ToolMilling.py:424
 #: appTools/ToolMilling.py:639 appTools/ToolMilling.py:1322
-#: appTools/ToolNCC.py:844 appTools/ToolNCC.py:1306 appTools/ToolNCC.py:1355
-#: appTools/ToolNCC.py:1388 appTools/ToolPaint.py:1086
+#: appTools/ToolNCC.py:846 appTools/ToolNCC.py:1308 appTools/ToolNCC.py:1357
+#: appTools/ToolNCC.py:1390 appTools/ToolPaint.py:1086
 #: appTools/ToolPanelize.py:191 appTools/ToolPanelize.py:205
 #: appTools/ToolSub.py:157 appTools/ToolSub.py:170 appTools/ToolSub.py:359
 #: appTools/ToolSub.py:372 tclCommands/TclCommandCopperClear.py:97
@@ -14455,7 +14462,7 @@ msgstr ""
 
 #: appTools/ToolCopperThieving.py:599 appTools/ToolFilm.py:631
 #: appTools/ToolFilm.py:879 appTools/ToolIsolation.py:916
-#: appTools/ToolNCC.py:851 appTools/ToolOptimal.py:145
+#: appTools/ToolNCC.py:853 appTools/ToolOptimal.py:145
 #: appTools/ToolPanelize.py:612 appTools/ToolRulesCheck.py:626
 msgid "Working..."
 msgstr "Elaborazione..."
@@ -14464,13 +14471,13 @@ msgstr "Elaborazione..."
 msgid "Geometry not supported for bounding box"
 msgstr "Geometria non supportata per box di selezione"
 
-#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1679
-#: appTools/ToolNCC.py:1734 appTools/ToolNCC.py:2674 appTools/ToolPaint.py:2457
+#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1681
+#: appTools/ToolNCC.py:1736 appTools/ToolNCC.py:2734 appTools/ToolPaint.py:2457
 msgid "No object available."
 msgstr "Nessun oggetto disponibile."
 
-#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1704
-#: appTools/ToolNCC.py:1757 appTools/ToolNCC.py:2716
+#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1706
+#: appTools/ToolNCC.py:1759 appTools/ToolNCC.py:2776
 msgid "The reference object type is not supported."
 msgstr "Il tipo di oggetto di riferimento non è supportato."
 
@@ -14528,7 +14535,7 @@ msgstr ""
 "da un altro oggetto."
 
 #: appTools/ToolCopperThieving.py:1231 appTools/ToolIsolation.py:3385
-#: appTools/ToolNCC.py:4257 appTools/ToolPaint.py:3137
+#: appTools/ToolNCC.py:4317 appTools/ToolPaint.py:3137
 msgid "Ref. Type"
 msgstr "Tipo riferimento"
 
@@ -14541,12 +14548,12 @@ msgstr ""
 "Può essere Gerber, Excellon o Geometry."
 
 #: appTools/ToolCopperThieving.py:1242 appTools/ToolIsolation.py:3396
-#: appTools/ToolNCC.py:4267 appTools/ToolPaint.py:3147
+#: appTools/ToolNCC.py:4327 appTools/ToolPaint.py:3147
 msgid "Ref. Object"
 msgstr "Oggetto di riferimento"
 
 #: appTools/ToolCopperThieving.py:1244 appTools/ToolIsolation.py:3398
-#: appTools/ToolNCC.py:4269 appTools/ToolPaint.py:3149
+#: appTools/ToolNCC.py:4329 appTools/ToolPaint.py:3149
 msgid "The FlatCAM object to be used as non copper clearing reference."
 msgstr "Oggetto FlatCAM da usare come riferimento rimozione rame."
 
@@ -14678,7 +14685,7 @@ msgstr "Aggiungerà marcatori bordi al file Gerber selezionato."
 
 #: appTools/ToolCutOut.py:281 appTools/ToolIsolation.py:791
 #: appTools/ToolIsolation.py:1049 appTools/ToolIsolation.py:1185
-#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:990 appTools/ToolNCC.py:1128
+#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:992 appTools/ToolNCC.py:1130
 #: appTools/ToolPaint.py:395 appTools/ToolPaint.py:686
 #: appTools/ToolPaint.py:823 appTools/ToolSolderPaste.py:131
 #: appTools/ToolSolderPaste.py:464 app_Main.py:4490
@@ -14687,12 +14694,12 @@ msgstr ""
 "Inserire il diametro utensile con un valore non zero, in formato float."
 
 #: appTools/ToolCutOut.py:357 appTools/ToolIsolation.py:1130
-#: appTools/ToolNCC.py:1073 appTools/ToolPaint.py:767
+#: appTools/ToolNCC.py:1075 appTools/ToolPaint.py:767
 msgid "Tool not in Tools Database. Adding a default tool."
 msgstr "Utensile non presente nel DB tool. Aggiungo un tool di default."
 
 #: appTools/ToolCutOut.py:364 appTools/ToolDrilling.py:955
-#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1080
+#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1082
 #: appTools/ToolPaint.py:775
 msgid ""
 "Cancelled.\n"
@@ -14710,7 +14717,7 @@ msgid "Default tool added."
 msgstr "Tool di default aggiunto."
 
 #: appTools/ToolCutOut.py:466 appTools/ToolIsolation.py:2577
-#: appTools/ToolNCC.py:3649 appTools/ToolPaint.py:2620
+#: appTools/ToolNCC.py:3709 appTools/ToolPaint.py:2620
 msgid "Selected tool can't be used here. Pick another."
 msgstr "Il tool selezionato non è utilizzabile qui. Prendine un altro."
 
@@ -14759,7 +14766,7 @@ msgstr "Tutti i task di CutOut terminati."
 #: appTools/ToolEtchCompensation.py:158 appTools/ToolInvertGerber.py:105
 #: appTools/ToolIsolation.py:912 appTools/ToolIsolation.py:1349
 #: appTools/ToolIsolation.py:1376 appTools/ToolMilling.py:1326
-#: appTools/ToolNCC.py:848 appTools/ToolNCC.py:1310 appTools/ToolPaint.py:1003
+#: appTools/ToolNCC.py:850 appTools/ToolNCC.py:1312 appTools/ToolPaint.py:1003
 #: appTools/ToolPanelize.py:196 tclCommands/TclCommandBbox.py:71
 #: tclCommands/TclCommandNregions.py:71
 msgid "Object not found"
@@ -14863,7 +14870,7 @@ msgstr ""
 "di oggetti che popoleranno la casella combinata 'Oggetto'."
 
 #: appTools/ToolCutOut.py:2074 appTools/ToolIsolation.py:3125
-#: appTools/ToolNCC.py:3939 appTools/ToolPaint.py:2901
+#: appTools/ToolNCC.py:3999 appTools/ToolPaint.py:2901
 msgid ""
 "Add a new tool to the Tool Table\n"
 "with the diameter specified above.\n"
@@ -16105,7 +16112,7 @@ msgstr "Nuovo utensile"
 msgid "Adding Tool cancelled"
 msgstr "Aggiunta utensile annullata"
 
-#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:879
+#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:881
 #: appTools/ToolOptimal.py:179
 msgid ""
 "The Gerber object has one Polygon as geometry.\n"
@@ -16114,13 +16121,13 @@ msgstr ""
 "L'oggetto Gerber ha un poligono come geometria.\n"
 "Non ci sono distanze tra gli elementi geometrici da trovare."
 
-#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:924
+#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:926
 msgid "Optimal tool diameter found"
 msgstr "Diametro utensile ottimale trovato"
 
 #: appTools/ToolIsolation.py:1000 appTools/ToolIsolation.py:1508
 #: appTools/ToolIsolation.py:1710 appTools/ToolIsolation.py:1897
-#: appTools/ToolNCC.py:935 appTools/ToolNCC.py:1343 appTools/ToolPaint.py:1031
+#: appTools/ToolNCC.py:937 appTools/ToolNCC.py:1345 appTools/ToolPaint.py:1031
 #: appTools/ToolPaint.py:1744
 #, fuzzy
 #| msgid "Failed. No tool selected in the tool table ..."
@@ -16134,39 +16141,39 @@ msgstr ""
 
 #: appTools/ToolIsolation.py:1057 appTools/ToolIsolation.py:1144
 #: appTools/ToolIsolation.py:1206 appTools/ToolIsolation.py:2626
-#: appTools/ToolNCC.py:999 appTools/ToolNCC.py:1087 appTools/ToolNCC.py:1149
-#: appTools/ToolNCC.py:3698 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
+#: appTools/ToolNCC.py:1001 appTools/ToolNCC.py:1089 appTools/ToolNCC.py:1151
+#: appTools/ToolNCC.py:3758 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
 #: appTools/ToolPaint.py:844 appTools/ToolPaint.py:2676
 #: appTools/ToolSolderPaste.py:488
 msgid "Cancelled. Tool already in Tool Table."
 msgstr "Annullato. Utensile già nella tabella utensili."
 
-#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1115
+#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1117
 #: appTools/ToolPaint.py:810
 msgid "New tool added to Tool Table from Tools Database."
 msgstr "Nuovo utensile aggiunto alla tabella da DB Tool."
 
-#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1179
+#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1181
 #: appTools/ToolPaint.py:873
 msgid "Default tool added to Tool Table."
 msgstr "Tool di default aggiunto alla tabella."
 
-#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1205
+#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1207
 #: appTools/ToolPaint.py:898
 msgid "Tool from Tool Table was edited."
 msgstr "Utensile dalla tabella modificato."
 
-#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1218
+#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1220
 #: appTools/ToolPaint.py:911 appTools/ToolSolderPaste.py:548
 msgid "Cancelled. New diameter value is already in the Tool Table."
 msgstr "Cancellato. Il valore del nuovo diametro è già presente nella tabella."
 
-#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1269
+#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1271
 #: appTools/ToolPaint.py:961
 msgid "Delete failed. Select a tool to delete."
 msgstr "Cancellazione fallita. Seleziona un utensile da cancellare."
 
-#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1275
+#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1277
 #: appTools/ToolPaint.py:967
 msgid "Tool(s) deleted from Tool Table."
 msgstr "Utensile(i) cancellato(i) dalla tabella."
@@ -16262,12 +16269,12 @@ msgstr "Nessun poligono nella selezione."
 msgid "Click the end point of the paint area."
 msgstr "Fai clic sul punto finale dell'area."
 
-#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3662
+#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3722
 #: appTools/ToolPaint.py:2633 app_Main.py:5773 app_Main.py:5783
 msgid "Tool from DB added in Tool Table."
 msgstr "Utensile da DB aggiunto alla tabella utensili."
 
-#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3715
+#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3775
 #: appTools/ToolPaint.py:2693
 msgid "New tool added to Tool Table."
 msgstr "Nuovo utensile aggiunto alla tabella."
@@ -16276,7 +16283,7 @@ msgstr "Nuovo utensile aggiunto alla tabella."
 msgid "Gerber object for isolation routing."
 msgstr "Oggetti Gerber per l'isolamento."
 
-#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3815
+#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3875
 msgid ""
 "Tools pool from which the algorithm\n"
 "will pick the ones used for copper clearing."
@@ -16301,7 +16308,7 @@ msgstr ""
 "nella geometria risultante. Questo perché con alcuni strumenti\n"
 "questa funzione non sarà in grado di creare la corretta geometria."
 
-#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3839
+#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3899
 msgid ""
 "Tool Diameter. It's value (in current FlatCAM units)\n"
 "is the cut width into the material."
@@ -16309,7 +16316,7 @@ msgstr ""
 "Diametro utensile. Il suo valore (in unità correnti FlatCAM)\n"
 "è l'altezza del taglio nel materiale."
 
-#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3843
+#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3903
 msgid ""
 "The Tool Type (TT) can be:\n"
 "- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
@@ -16346,13 +16353,13 @@ msgstr ""
 "tipo di operazione\n"
 "nella geometria risultante come isolamento."
 
-#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3923
+#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3983
 #, fuzzy
 #| msgid "Optimal Tool"
 msgid "Optimal"
 msgstr "Strumento Ottimo"
 
-#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3927
+#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3987
 msgid ""
 "Find a tool diameter that is guaranteed\n"
 "to do a complete isolation."
@@ -16360,7 +16367,7 @@ msgstr ""
 "Trova un utensile con diametro tale da\n"
 "garantire un isolamento completo."
 
-#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:3967
+#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:4027
 #: appTools/ToolPaint.py:2929 appTools/ToolSolderPaste.py:1211
 msgid ""
 "Delete a selection of tools in the Tool Table\n"
@@ -16385,7 +16392,7 @@ msgstr ""
 msgid "Object whose area will be removed from isolation geometry."
 msgstr "Oggetto la cui area verrà rimossa dalla geometria di isolamento."
 
-#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4259
+#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4319
 msgid ""
 "The type of FlatCAM object to be used as non copper clearing reference.\n"
 "It can be Gerber, Excellon or Geometry."
@@ -16468,17 +16475,17 @@ msgstr "Nessun oggetto selezionato."
 msgid "Error when mouse left click."
 msgstr "Errore con il click sinistro del mouse."
 
-#: appTools/ToolNCC.py:835
+#: appTools/ToolNCC.py:837
 msgid "NCC Tool. Checking tools for validity."
 msgstr ""
 
-#: appTools/ToolNCC.py:947
+#: appTools/ToolNCC.py:949
 msgid ""
 "Incomplete isolation. None of the selected tools could do a complete "
 "isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:950
+#: appTools/ToolNCC.py:952
 #, fuzzy
 #| msgid ""
 #| "Find a tool diameter that is guaranteed\n"
@@ -16488,97 +16495,97 @@ msgstr ""
 "Trova un utensile con diametro tale da\n"
 "garantire un isolamento completo."
 
-#: appTools/ToolNCC.py:1722 appTools/ToolNCC.py:2646
+#: appTools/ToolNCC.py:1724 appTools/ToolNCC.py:2706
 msgid "NCC Tool. Preparing non-copper polygons."
 msgstr "Strumento NCC. Preparazione poligoni non-rame."
 
-#: appTools/ToolNCC.py:1782 appTools/ToolNCC.py:2774
+#: appTools/ToolNCC.py:1784 appTools/ToolNCC.py:2834
 msgid "NCC Tool. Calculate 'empty' area."
 msgstr "Strumento NCC. Calcolo aree 'vuote'."
 
-#: appTools/ToolNCC.py:1793 appTools/ToolNCC.py:1822 appTools/ToolNCC.py:1928
-#: appTools/ToolNCC.py:1941 appTools/ToolNCC.py:2787 appTools/ToolNCC.py:2892
-#: appTools/ToolNCC.py:2907 appTools/ToolNCC.py:3173 appTools/ToolNCC.py:3274
-#: appTools/ToolNCC.py:3289
+#: appTools/ToolNCC.py:1795 appTools/ToolNCC.py:1824 appTools/ToolNCC.py:1930
+#: appTools/ToolNCC.py:1943 appTools/ToolNCC.py:2847 appTools/ToolNCC.py:2952
+#: appTools/ToolNCC.py:2967 appTools/ToolNCC.py:3233 appTools/ToolNCC.py:3334
+#: appTools/ToolNCC.py:3349
 msgid "Buffering finished"
 msgstr "Fine buffering"
 
-#: appTools/ToolNCC.py:1797 appTools/ToolNCC.py:1826 appTools/ToolNCC.py:1932
-#: appTools/ToolNCC.py:1944 appTools/ToolNCC.py:2795 appTools/ToolNCC.py:2914
-#: appTools/ToolNCC.py:3180 appTools/ToolNCC.py:3296
+#: appTools/ToolNCC.py:1799 appTools/ToolNCC.py:1828 appTools/ToolNCC.py:1934
+#: appTools/ToolNCC.py:1946 appTools/ToolNCC.py:2855 appTools/ToolNCC.py:2974
+#: appTools/ToolNCC.py:3240 appTools/ToolNCC.py:3356
 msgid "Could not get the extent of the area to be non copper cleared."
 msgstr "Impossibile ottenere l'estensione dell'area da cui eliminare il rame."
 
-#: appTools/ToolNCC.py:1805 appTools/ToolNCC.py:1955 appTools/ToolNCC.py:2925
+#: appTools/ToolNCC.py:1807 appTools/ToolNCC.py:1957 appTools/ToolNCC.py:2985
 msgid "NCC Tool. Finished calculation of 'empty' area."
 msgstr "Strumento NCC. Fine calcolo aree 'vuote'."
 
-#: appTools/ToolNCC.py:1858 appTools/ToolNCC.py:2822 appTools/ToolNCC.py:2899
-#: appTools/ToolNCC.py:3200 appTools/ToolNCC.py:3281
+#: appTools/ToolNCC.py:1860 appTools/ToolNCC.py:2882 appTools/ToolNCC.py:2959
+#: appTools/ToolNCC.py:3260 appTools/ToolNCC.py:3341
 msgid ""
 "Isolation geometry is broken. Margin is less than isolation tool diameter."
 msgstr ""
 "La geometria dell'isolamento è rotta. Il margine è inferiore al diametro "
 "dell'utensile di isolamento."
 
-#: appTools/ToolNCC.py:1948 appTools/ToolNCC.py:2918 appTools/ToolNCC.py:3299
+#: appTools/ToolNCC.py:1950 appTools/ToolNCC.py:2978 appTools/ToolNCC.py:3359
 msgid "The selected object is not suitable for copper clearing."
 msgstr "L'oggetto selezionato non è idoneo alla pulizia rame."
 
-#: appTools/ToolNCC.py:1998
+#: appTools/ToolNCC.py:2000
 msgid "Clearing the polygon with the method: lines."
 msgstr "Pulizia poligono con metodo: linee."
 
-#: appTools/ToolNCC.py:2008
+#: appTools/ToolNCC.py:2010
 msgid "Failed. Clearing the polygon with the method: seed."
 msgstr "Errore. Pulizia poligono con metodo: semi."
 
-#: appTools/ToolNCC.py:2017
+#: appTools/ToolNCC.py:2019
 msgid "Failed. Clearing the polygon with the method: standard."
 msgstr "Errore. Pulizia poligono con metodo: standard."
 
-#: appTools/ToolNCC.py:2033
+#: appTools/ToolNCC.py:2035
 msgid "Polygon could not be cleared. Location:"
 msgstr "Poligono non pulibile alla posizione:"
 
-#: appTools/ToolNCC.py:2065 appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2595
-#: appTools/ToolNCC.py:2597
+#: appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2069 appTools/ToolNCC.py:2655
+#: appTools/ToolNCC.py:2657
 msgid "Non-Copper clearing ..."
 msgstr "NCC cancellazione non-rame ..."
 
-#: appTools/ToolNCC.py:2086
+#: appTools/ToolNCC.py:2088
 msgid ""
 "There is no copper clearing tool in the selection and at least one is needed."
 msgstr ""
 "Non c'è utensile di copper clearing nella selezione e ne serve almeno uno."
 
-#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2742
+#: appTools/ToolNCC.py:2103 appTools/ToolNCC.py:2802
 msgid ""
 "NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
 msgstr ""
 "Strumento NCC. Fine elaborazione poligoni non-rame. Task rimozione rame "
 "completato."
 
-#: appTools/ToolNCC.py:2129 appTools/ToolNCC.py:2363
+#: appTools/ToolNCC.py:2131 appTools/ToolNCC.py:2365
 msgid "NCC Tool failed creating bounding box."
 msgstr ""
 "Lo strumento NCC non è riuscito a creare il rettangolo di contenimento."
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "NCC Tool clearing with tool diameter"
 msgstr "Strumento NCC, uso dell'utensile diametro"
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "started."
 msgstr "avviato."
 
-#: appTools/ToolNCC.py:2277
+#: appTools/ToolNCC.py:2279
 msgid "Could not use the tool for copper clear."
 msgstr "Impossibile usare questo tool per il copper clear."
 
-#: appTools/ToolNCC.py:2299 appTools/ToolNCC.py:3099
+#: appTools/ToolNCC.py:2301 appTools/ToolNCC.py:3159
 msgid ""
 "There is no NCC Geometry in the file.\n"
 "Usually it means that the tool diameter is too big for the painted "
@@ -16590,28 +16597,28 @@ msgstr ""
 "geometria.\n"
 "Modifica i parametri e riprova."
 
-#: appTools/ToolNCC.py:2309 appTools/ToolNCC.py:3108
+#: appTools/ToolNCC.py:2311 appTools/ToolNCC.py:3168
 msgid "NCC Tool clear all done."
 msgstr "Lo strumento NCC ha terminato."
 
-#: appTools/ToolNCC.py:2312 appTools/ToolNCC.py:3111
+#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:3171
 msgid "NCC Tool clear all done but the copper features isolation is broken for"
 msgstr "Lo strumento NCC ha terminato ma l'isolamento del rame è rotto per"
 
-#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:2510 appTools/ToolNCC.py:3113
-#: appTools/ToolNCC.py:3496
+#: appTools/ToolNCC.py:2316 appTools/ToolNCC.py:2570 appTools/ToolNCC.py:3173
+#: appTools/ToolNCC.py:3556
 msgid "tools"
 msgstr "utensili"
 
-#: appTools/ToolNCC.py:2341
+#: appTools/ToolNCC.py:2343
 msgid "NCC Tool. Rest machining copper clearing task started."
 msgstr "Strumento NCC. Avviata lavorazione di rimozione rame."
 
-#: appTools/ToolNCC.py:2506 appTools/ToolNCC.py:3492
+#: appTools/ToolNCC.py:2566 appTools/ToolNCC.py:3552
 msgid "NCC Tool Rest Machining clear all done."
 msgstr "Utensile NCC lavorazione di ripresa completata."
 
-#: appTools/ToolNCC.py:2509 appTools/ToolNCC.py:3495
+#: appTools/ToolNCC.py:2569 appTools/ToolNCC.py:3555
 msgid ""
 "NCC Tool Rest Machining clear all done but the copper features isolation is "
 "broken for"
@@ -16619,11 +16626,11 @@ msgstr ""
 "Utensile NCC lavorazione di ripresa completata ma l'isolamento del rame è "
 "rotto per"
 
-#: appTools/ToolNCC.py:2607
+#: appTools/ToolNCC.py:2667
 msgid "NCC Tool started. Reading parameters."
 msgstr "Strumento NCC avviato. Lettura parametri."
 
-#: appTools/ToolNCC.py:3594
+#: appTools/ToolNCC.py:3654
 msgid ""
 "Try to use the Buffering Type = Full in Preferences -> Gerber General. "
 "Reload the Gerber file after this change."
@@ -16631,15 +16638,15 @@ msgstr ""
 "Prova a utilizzare il tipo di buffer = Completo in Preferenze -> Gerber "
 "Generale. Ricarica il file Gerber dopo questa modifica."
 
-#: appTools/ToolNCC.py:3750
+#: appTools/ToolNCC.py:3810
 msgid "Non-Copper Clearing"
 msgstr "Pulizia non-rame (NCC)"
 
-#: appTools/ToolNCC.py:3779 appTools/ToolPaint.py:2765
+#: appTools/ToolNCC.py:3839 appTools/ToolPaint.py:2765
 msgid "Obj Type"
 msgstr "Tipo oggetto"
 
-#: appTools/ToolNCC.py:3781
+#: appTools/ToolNCC.py:3841
 msgid ""
 "Specify the type of object to be cleared of excess copper.\n"
 "It can be of type: Gerber or Geometry.\n"
@@ -16651,11 +16658,11 @@ msgstr ""
 "Ciò che è selezionato qui detterà il tipo\n"
 "di oggetti che popoleranno la combobox 'Oggetto'."
 
-#: appTools/ToolNCC.py:3803
+#: appTools/ToolNCC.py:3863
 msgid "Object to be cleared of excess copper."
 msgstr "Oggetti puliti dall'eccesso di rame."
 
-#: appTools/ToolNCC.py:3831
+#: appTools/ToolNCC.py:3891
 msgid ""
 "This is the Tool Number.\n"
 "Non copper clearing will start with the tool with the biggest \n"
@@ -17764,6 +17771,12 @@ msgstr "Pulisci testo."
 msgid "...processing..."
 msgstr "...elaborazione..."
 
+#: appTools/ToolShell.py:293
+#, fuzzy
+#| msgid "FlatCAM Beta"
+msgid "FlatCAM Shell"
+msgstr "FlatCAM Beta"
+
 #: appTools/ToolSolderPaste.py:459
 msgid "Please enter a tool diameter to add, in Float format."
 msgstr "Inserisci un diametro utensile da aggiungere, in formato Float."
@@ -18358,6 +18371,10 @@ msgstr ""
 "MultiGeo non è possibile.\n"
 "Modifica solo una geometria alla volta."
 
+#: app_Main.py:2261
+msgid "EDITOR Area"
+msgstr ""
+
 #: app_Main.py:2263
 msgid "Editor is activated ..."
 msgstr "L'editor è attivato ..."
diff --git a/locale/pt_BR/LC_MESSAGES/strings.mo b/locale/pt_BR/LC_MESSAGES/strings.mo
index 64883bac..bd8fa924 100644
Binary files a/locale/pt_BR/LC_MESSAGES/strings.mo and b/locale/pt_BR/LC_MESSAGES/strings.mo differ
diff --git a/locale/pt_BR/LC_MESSAGES/strings.po b/locale/pt_BR/LC_MESSAGES/strings.po
index e47aaf08..c1c9a2ba 100644
--- a/locale/pt_BR/LC_MESSAGES/strings.po
+++ b/locale/pt_BR/LC_MESSAGES/strings.po
@@ -1,8 +1,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
-"POT-Creation-Date: 2020-10-22 15:08+0300\n"
-"PO-Revision-Date: 2020-10-22 15:08+0300\n"
+"POT-Creation-Date: 2020-10-22 22:02+0300\n"
+"PO-Revision-Date: 2020-10-22 22:02+0300\n"
 "Last-Translator: Carlos Stein <carlos.stein@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -104,7 +104,7 @@ msgstr "Favoritos"
 #: appDatabase.py:2998 appDatabase.py:3044 appEditors/AppExcEditor.py:1023
 #: appEditors/AppExcEditor.py:1091 appEditors/AppTextEditor.py:263
 #: appGUI/MainGUI.py:2878 appGUI/MainGUI.py:3100 appGUI/MainGUI.py:3315
-#: appObjects/FlatCAMCNCJob.py:1745 appObjects/ObjectCollection.py:126
+#: appObjects/FlatCAMCNCJob.py:1750 appObjects/ObjectCollection.py:126
 #: appTools/ToolFilm.py:238 appTools/ToolFilm.py:384 appTools/ToolImage.py:112
 #: appTools/ToolMove.py:269 appTools/ToolPcbWizard.py:189
 #: appTools/ToolPcbWizard.py:212 appTools/ToolQRCode.py:526
@@ -120,8 +120,8 @@ msgid "Cancelled."
 msgstr "Cancelado."
 
 #: Bookmark.py:308 appDatabase.py:673 appDatabase.py:3006
-#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1667
-#: appObjects/FlatCAMCNCJob.py:1857 appObjects/FlatCAMCNCJob.py:2306
+#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1672
+#: appObjects/FlatCAMCNCJob.py:1862 appObjects/FlatCAMCNCJob.py:2311
 #: appTools/ToolFilm.py:582 appTools/ToolFilm.py:830
 #: appTools/ToolSolderPaste.py:1097 app_Main.py:2666 app_Main.py:8451
 #: app_Main.py:8499 app_Main.py:8628 app_Main.py:8765 app_Main.py:8833
@@ -158,18 +158,18 @@ msgid "The user requested a graceful exit of the current task."
 msgstr "O usuário solicitou uma saída normal da tarefa atual."
 
 #: appCommon/Common.py:292 appTools/ToolCopperThieving.py:328
-#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1364
+#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1366
 msgid "Click the start point of the area."
 msgstr "Clique no ponto inicial da área."
 
-#: appCommon/Common.py:351 appTools/ToolNCC.py:1423 appTools/ToolPaint.py:1210
+#: appCommon/Common.py:351 appTools/ToolNCC.py:1425 appTools/ToolPaint.py:1210
 msgid "Click the end point of the area."
 msgstr "Clique no ponto final da área."
 
 #: appCommon/Common.py:357 appCommon/Common.py:459
 #: appTools/ToolCopperThieving.py:385 appTools/ToolIsolation.py:2348
-#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1429
-#: appTools/ToolNCC.py:1481 appTools/ToolPaint.py:1216
+#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1431
+#: appTools/ToolNCC.py:1483 appTools/ToolPaint.py:1216
 #: appTools/ToolPaint.py:1267
 msgid "Zone added. Click to start adding next zone or right click to finish."
 msgstr ""
@@ -177,7 +177,7 @@ msgstr ""
 "o botão direito para terminar."
 
 #: appCommon/Common.py:404 appEditors/AppGeoEditor.py:2352
-#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1452
+#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1454
 #: appTools/ToolPaint.py:1238
 msgid "Click on next Point or click right mouse button to complete ..."
 msgstr ""
@@ -287,7 +287,7 @@ msgstr "Nome da Ferramenta"
 #: appGUI/ObjectUI.py:1082 appGUI/ObjectUI.py:1650
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:130
 #: appTools/ToolCutOut.py:2060 appTools/ToolIsolation.py:3091
-#: appTools/ToolNCC.py:3906 appTools/ToolNCC.py:3917 appTools/ToolPaint.py:2882
+#: appTools/ToolNCC.py:3966 appTools/ToolNCC.py:3977 appTools/ToolPaint.py:2882
 msgid "Tool Dia"
 msgstr "Diâmetro da Ferramenta"
 
@@ -709,13 +709,13 @@ msgstr ""
 #: appDatabase.py:307 appDatabase.py:684 appDatabase.py:718 appDatabase.py:2647
 #: appDatabase.py:3017 appDatabase.py:3051 appTools/ToolCutOut.py:294
 #: appTools/ToolDrilling.py:895 appTools/ToolIsolation.py:1067
-#: appTools/ToolNCC.py:1009 appTools/ToolPaint.py:704
+#: appTools/ToolNCC.py:1011 appTools/ToolPaint.py:704
 msgid "Could not load Tools DB file."
 msgstr "Não foi possível carregar o arquivo com o banco de dados."
 
 #: appDatabase.py:315 appDatabase.py:726 appDatabase.py:2655
 #: appDatabase.py:3059 appTools/ToolCutOut.py:305 appTools/ToolDrilling.py:903
-#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1020
+#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1022
 #: appTools/ToolPaint.py:715
 msgid "Failed to parse Tools DB file."
 msgstr "Falha ao analisar o arquivo com o banco de dados."
@@ -774,7 +774,7 @@ msgstr "Importar Banco de Dados de Ferramentas do FlatCAM"
 #: appDatabase.py:3464 appObjects/FlatCAMGeometry.py:1089
 #: appTools/ToolCutOut.py:484 appTools/ToolCutOut.py:525
 #: appTools/ToolIsolation.py:2583 appTools/ToolIsolation.py:2667
-#: appTools/ToolNCC.py:3655 appTools/ToolNCC.py:3735 appTools/ToolPaint.py:2626
+#: appTools/ToolNCC.py:3715 appTools/ToolNCC.py:3795 appTools/ToolPaint.py:2626
 #: appTools/ToolPaint.py:2715 app_Main.py:5676 app_Main.py:5718
 #: app_Main.py:5749 app_Main.py:5769 app_Main.py:5779
 msgid "Tools Database"
@@ -831,7 +831,7 @@ msgstr "Parâmetros de Ranhura"
 
 #: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
 #: appGUI/ObjectUI.py:570 appGUI/ObjectUI.py:894 appGUI/ObjectUI.py:1876
-#: appGUI/ObjectUI.py:2681 appGUI/ObjectUI.py:2748
+#: appGUI/ObjectUI.py:2693 appGUI/ObjectUI.py:2760
 #: appTools/ToolCalibration.py:929 appTools/ToolFiducials.py:681
 msgid "Name"
 msgstr "Nome"
@@ -844,7 +844,7 @@ msgstr "Nome"
 #: appTools/ToolDrilling.py:2065 appTools/ToolIsolation.py:3022
 #: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
 #: appTools/ToolMilling.py:1360 appTools/ToolMilling.py:1670
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 #: appTools/ToolPcbWizard.py:404 appTools/ToolProperties.py:417
 #: appTools/ToolProperties.py:480 appTools/ToolSolderPaste.py:1166
 #: tclCommands/TclCommandDrillcncjob.py:195
@@ -883,7 +883,7 @@ msgstr ""
 
 #: appDatabase.py:1186 appDatabase.py:1504
 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46
-#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:3990
+#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:4050
 msgid "Operation"
 msgstr "Operação"
 
@@ -910,7 +910,7 @@ msgstr "Perfuração"
 
 #: appDatabase.py:1192 appDatabase.py:1514 appDatabase.py:2761
 #: appDatabase.py:3095 appTools/ToolIsolation.py:1101
-#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4000
+#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4060
 msgid "Isolation"
 msgstr "Isolação"
 
@@ -921,7 +921,7 @@ msgid "Paint"
 msgstr "Pintura"
 
 #: appDatabase.py:1192 appDatabase.py:2773 appDatabase.py:3111
-#: appTools/ToolNCC.py:1044 appTools/ToolNCC.py:3648
+#: appTools/ToolNCC.py:1046 appTools/ToolNCC.py:3708
 #, fuzzy
 #| msgid "CCW"
 msgid "NCC"
@@ -940,7 +940,7 @@ msgstr "Recorte PCB"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:303
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:284
-#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4283
+#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4343
 #: appTools/ToolPaint.py:3163
 msgid "Shape"
 msgstr "Formato"
@@ -977,7 +977,7 @@ msgstr ""
 "Velocidade de Avanço Z\n"
 "A velocidade no plano Z."
 
-#: appDatabase.py:1506 appTools/ToolNCC.py:3992
+#: appDatabase.py:1506 appTools/ToolNCC.py:4052
 msgid ""
 "The 'Operation' can be:\n"
 "- Isolation -> will ensure that the non-copper clearing is always complete.\n"
@@ -990,7 +990,7 @@ msgstr ""
 "- Limpar -> retirada de cobre padrão."
 
 #: appDatabase.py:1513 appEditors/AppGerberEditor.py:2749
-#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:3999
+#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:4059
 msgid "Clear"
 msgstr "Limpar"
 
@@ -1000,7 +1000,7 @@ msgstr "Limpar"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137
 #: appTools/ToolIsolation.py:3204 appTools/ToolMilling.py:1760
-#: appTools/ToolNCC.py:4008
+#: appTools/ToolNCC.py:4068
 msgid "Milling Type"
 msgstr "Tipo de Fresamento"
 
@@ -1010,7 +1010,7 @@ msgstr "Tipo de Fresamento"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147
 #: appTools/ToolIsolation.py:3206 appTools/ToolIsolation.py:3214
-#: appTools/ToolNCC.py:4010 appTools/ToolNCC.py:4018
+#: appTools/ToolNCC.py:4070 appTools/ToolNCC.py:4078
 msgid ""
 "Milling type when the selected tool is of type: 'iso_op':\n"
 "- climb / best for precision milling and to reduce tool usage\n"
@@ -1025,7 +1025,7 @@ msgstr ""
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144
-#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4015
+#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4075
 msgid "Climb"
 msgstr "Subida"
 
@@ -1033,7 +1033,7 @@ msgstr "Subida"
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:190
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145
-#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4016
+#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4076
 msgid "Conventional"
 msgstr "Convencional"
 
@@ -1044,12 +1044,12 @@ msgstr "Convencional"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:161
 #: appTools/ToolDrilling.py:2312 appTools/ToolIsolation.py:3189
-#: appTools/ToolNCC.py:4031 appTools/ToolPaint.py:2955
+#: appTools/ToolNCC.py:4091 appTools/ToolPaint.py:2955
 msgid "Overlap"
 msgstr "Sobreposição"
 
 #: appDatabase.py:1544 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
-#: appTools/ToolNCC.py:4033
+#: appTools/ToolNCC.py:4093
 msgid ""
 "How much (percentage) of the tool width to overlap each tool pass.\n"
 "Adjust the value starting with lower values\n"
@@ -1080,8 +1080,8 @@ msgstr ""
 #: appTools/ToolCopperThieving.py:1204 appTools/ToolCopperThieving.py:1455
 #: appTools/ToolCorners.py:411 appTools/ToolCutOut.py:2157
 #: appTools/ToolFiducials.py:786 appTools/ToolInvertGerber.py:234
-#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4075
-#: appTools/ToolNCC.py:4178
+#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4135
+#: appTools/ToolNCC.py:4238
 msgid "Margin"
 msgstr "Margem"
 
@@ -1092,25 +1092,25 @@ msgstr "Margem"
 #: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204
 #: appTools/ToolCopperThieving.py:1206 appTools/ToolCorners.py:413
-#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4077
-#: appTools/ToolNCC.py:4180
+#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4137
+#: appTools/ToolNCC.py:4240
 msgid "Bounding box margin."
 msgstr "Margem da caixa delimitadora."
 
 #: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
-#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2172
+#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2184
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
 #: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:196
-#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4052
+#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4112
 #: appTools/ToolPaint.py:2991 appTools/ToolPunchGerber.py:793
 msgid "Method"
 msgstr "Método"
 
 #: appDatabase.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
-#: appTools/ToolNCC.py:4054
+#: appTools/ToolNCC.py:4114
 msgid ""
 "Algorithm for copper clearing:\n"
 "- Standard: Fixed step inwards.\n"
@@ -1125,7 +1125,7 @@ msgstr ""
 #: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1963 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1456
+#: appTools/ToolNCC.py:1965 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1456
 #: appTools/ToolPaint.py:3016 defaults.py:346
 #: tclCommands/TclCommandCopperClear.py:126
 #: tclCommands/TclCommandCopperClear.py:134 tclCommands/TclCommandPaint.py:125
@@ -1136,7 +1136,7 @@ msgstr "Padrão"
 #: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1974 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1470
+#: appTools/ToolNCC.py:1976 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1470
 #: appTools/ToolPaint.py:3016 defaults.py:469 defaults.py:507
 #: tclCommands/TclCommandCopperClear.py:128
 #: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
@@ -1147,7 +1147,7 @@ msgstr "Semente"
 #: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1702
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1985 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:160
+#: appTools/ToolNCC.py:1987 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:160
 #: appTools/ToolPaint.py:1484 appTools/ToolPaint.py:3016
 #: tclCommands/TclCommandCopperClear.py:130 tclCommands/TclCommandPaint.py:129
 msgid "Lines"
@@ -1156,24 +1156,24 @@ msgstr "Linhas"
 #: appDatabase.py:1586 appDatabase.py:1701
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1996 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1649
+#: appTools/ToolNCC.py:1998 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1649
 #: appTools/ToolPaint.py:3016 tclCommands/TclCommandPaint.py:133
 msgid "Combo"
 msgstr "Combo"
 
 #: appDatabase.py:1594 appDatabase.py:1712 appEditors/AppGeoEditor.py:505
-#: appGUI/ObjectUI.py:2257 appGUI/ObjectUI.py:2280
+#: appGUI/ObjectUI.py:2269 appGUI/ObjectUI.py:2292
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:222
-#: appObjects/FlatCAMCNCJob.py:1300 appObjects/FlatCAMCNCJob.py:1322
-#: appTools/ToolNCC.py:4088 appTools/ToolNCC.py:4191 appTools/ToolPaint.py:3027
+#: appObjects/FlatCAMCNCJob.py:1305 appObjects/FlatCAMCNCJob.py:1327
+#: appTools/ToolNCC.py:4148 appTools/ToolNCC.py:4251 appTools/ToolPaint.py:3027
 msgid "Connect"
 msgstr "Conectar"
 
 #: appDatabase.py:1598 appDatabase.py:1715 appEditors/AppGeoEditor.py:507
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
-#: appTools/ToolNCC.py:4092 appTools/ToolNCC.py:4193 appTools/ToolPaint.py:3030
+#: appTools/ToolNCC.py:4152 appTools/ToolNCC.py:4253 appTools/ToolPaint.py:3030
 msgid ""
 "Draw lines between resulting\n"
 "segments to minimize tool lifts."
@@ -1184,14 +1184,14 @@ msgstr ""
 #: appDatabase.py:1604 appDatabase.py:1719 appEditors/AppGeoEditor.py:515
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:230
-#: appTools/ToolNCC.py:4098 appTools/ToolNCC.py:4199 appTools/ToolPaint.py:3034
+#: appTools/ToolNCC.py:4158 appTools/ToolNCC.py:4259 appTools/ToolPaint.py:3034
 msgid "Contour"
 msgstr "Contorno"
 
 #: appDatabase.py:1608 appDatabase.py:1722 appEditors/AppGeoEditor.py:517
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232
-#: appTools/ToolNCC.py:4102 appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3037
+#: appTools/ToolNCC.py:4162 appTools/ToolNCC.py:4261 appTools/ToolPaint.py:3037
 msgid ""
 "Cut around the perimeter of the polygon\n"
 "to trim rough edges."
@@ -1203,13 +1203,13 @@ msgstr "Corta no perímetro do polígono para retirar as arestas."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
 #: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
-#: appTools/ToolNCC.py:4108 appTools/ToolNCC.py:4207 appTools/ToolPaint.py:2976
+#: appTools/ToolNCC.py:4168 appTools/ToolNCC.py:4267 appTools/ToolPaint.py:2976
 #: appTools/ToolPaint.py:3083 appTools/ToolTransform.py:517
 msgid "Offset"
 msgstr "Deslocar"
 
 #: appDatabase.py:1618 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
-#: appTools/ToolNCC.py:4112 appTools/ToolNCC.py:4209
+#: appTools/ToolNCC.py:4172 appTools/ToolNCC.py:4269
 msgid ""
 "If used, it will add an offset to the copper features.\n"
 "The copper clearing will finish to a distance\n"
@@ -1695,7 +1695,7 @@ msgstr ""
 #: appTools/ToolInvertGerber.py:304 appTools/ToolInvertGerber.py:315
 #: appTools/ToolIsolation.py:3494 appTools/ToolIsolation.py:3505
 #: appTools/ToolMilling.py:2341 appTools/ToolMilling.py:2352
-#: appTools/ToolNCC.py:4448 appTools/ToolNCC.py:4459
+#: appTools/ToolNCC.py:4508 appTools/ToolNCC.py:4519
 #: appTools/ToolOptimal.py:614 appTools/ToolOptimal.py:625
 #: appTools/ToolPaint.py:3267 appTools/ToolPaint.py:3278
 #: appTools/ToolPanelize.py:914 appTools/ToolPanelize.py:925
@@ -1731,7 +1731,7 @@ msgstr "Valor fora da faixa"
 #: appTools/ToolInvertGerber.py:310 appTools/ToolInvertGerber.py:317
 #: appTools/ToolIsolation.py:3500 appTools/ToolIsolation.py:3507
 #: appTools/ToolMilling.py:2347 appTools/ToolMilling.py:2354
-#: appTools/ToolNCC.py:4454 appTools/ToolNCC.py:4461
+#: appTools/ToolNCC.py:4514 appTools/ToolNCC.py:4521
 #: appTools/ToolOptimal.py:620 appTools/ToolOptimal.py:627
 #: appTools/ToolPaint.py:3273 appTools/ToolPaint.py:3280
 #: appTools/ToolPanelize.py:920 appTools/ToolPanelize.py:927
@@ -1889,8 +1889,8 @@ msgstr "N° Ranhuras"
 #: appEditors/AppExcEditor.py:2003 appObjects/FlatCAMGeometry.py:706
 #: appObjects/FlatCAMGeometry.py:1232 appObjects/FlatCAMGeometry.py:1974
 #: appObjects/FlatCAMGeometry.py:2633 appTools/ToolIsolation.py:1252
-#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1195
-#: appTools/ToolNCC.py:1332 appTools/ToolPaint.py:889
+#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1197
+#: appTools/ToolNCC.py:1334 appTools/ToolPaint.py:889
 #: appTools/ToolPaint.py:1027 appTools/ToolPaint.py:1740
 #: appTools/ToolSolderPaste.py:455 appTools/ToolSolderPaste.py:527
 msgid "Wrong value format entered, use a number."
@@ -1973,7 +1973,7 @@ msgstr "Nome:"
 
 #: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:620
 #: appGUI/ObjectUI.py:967 appTools/ToolIsolation.py:3010
-#: appTools/ToolNCC.py:3813 appTools/ToolPaint.py:2800
+#: appTools/ToolNCC.py:3873 appTools/ToolPaint.py:2800
 #: appTools/ToolSolderPaste.py:1155
 msgid "Tools Table"
 msgstr "Tabela de Ferramentas"
@@ -2010,7 +2010,7 @@ msgstr ""
 
 #: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1084
 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
-#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3908
+#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3968
 msgid "Diameter for the new tool"
 msgstr "Diâmetro da nova ferramenta"
 
@@ -2383,7 +2383,7 @@ msgstr "Redondo"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:289
 #: appTools/ToolDrilling.py:2588 appTools/ToolExtractDrills.py:486
 #: appTools/ToolExtractDrills.py:619 appTools/ToolIsolation.py:3430
-#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4288
+#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4348
 #: appTools/ToolPaint.py:3168 appTools/ToolPunchGerber.py:759
 #: appTools/ToolPunchGerber.py:909 appTools/ToolQRCode.py:788
 msgid "Square"
@@ -2430,6 +2430,17 @@ msgstr "Ferramenta de Texto"
 msgid "Font"
 msgstr "Fonte"
 
+#: appEditors/AppGeoEditor.py:313 appEditors/AppGerberEditor.py:2495
+#: appEditors/AppGerberEditor.py:3968 appGUI/ObjectUI.py:316
+#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
+#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
+#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
+#: appTools/ToolFiducials.py:770
+msgid "Size"
+msgstr "Tamanho"
+
 #: appEditors/AppGeoEditor.py:322 appGUI/MainGUI.py:1502
 msgid "Text"
 msgstr "Texto"
@@ -2449,7 +2460,7 @@ msgstr "Ferramenta de Texto"
 #: appTools/ToolIsolation.py:697 appTools/ToolIsolation.py:3166
 #: appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
 #: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:329
-#: appTools/ToolNCC.py:2278 appTools/ToolNCC.py:3980 appTools/ToolPaint.py:304
+#: appTools/ToolNCC.py:2280 appTools/ToolNCC.py:4040 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:2940
 msgid "Tool"
 msgstr "Ferramenta"
@@ -2576,7 +2587,7 @@ msgstr "Origem"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:256
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
-#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4244
+#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4304
 #: appTools/ToolPaint.py:3097 appTools/ToolTransform.py:557 defaults.py:566
 msgid "Selection"
 msgstr "Seleção"
@@ -2612,7 +2623,7 @@ msgid "A point of reference in format X,Y."
 msgstr "Um ponto de referência no formato X,Y."
 
 #: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
-#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2338
+#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2350
 #: appTools/ToolDblSided.py:706 appTools/ToolDblSided.py:892
 #: appTools/ToolNCC.py:63 appTools/ToolPaint.py:137
 #: appTools/ToolSolderPaste.py:160 appTools/ToolSolderPaste.py:1203
@@ -2916,7 +2927,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70
 #: appTools/ToolCalibration.py:881 appTools/ToolDrilling.py:2540
 #: appTools/ToolFilm.py:931 appTools/ToolMilling.py:2218
-#: appTools/ToolNCC.py:3802 appTools/ToolPaint.py:2788
+#: appTools/ToolNCC.py:3862 appTools/ToolPaint.py:2788
 #: appTools/ToolPanelize.py:697 appTools/ToolTransform.py:557
 msgid "Object"
 msgstr "Objeto"
@@ -3327,7 +3338,7 @@ msgstr "Linha"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290
 #: appTools/ToolDrilling.py:2589 appTools/ToolIsolation.py:3431
-#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4289
+#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4349
 #: appTools/ToolPaint.py:3169
 msgid "Polygon"
 msgstr "Polígono"
@@ -3362,7 +3373,7 @@ msgstr "Clique no ponto alvo."
 msgid "Editing MultiGeo Geometry, tool"
 msgstr "Editando Geometria MultiGeo, ferramenta"
 
-#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2280
+#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2282
 msgid "with diameter"
 msgstr "com diâmetro"
 
@@ -3590,17 +3601,6 @@ msgstr "Tabela de Aberturas para o Objeto Gerber."
 msgid "Code"
 msgstr "Código"
 
-#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:316
-#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
-#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
-#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
-#: appTools/ToolFiducials.py:770
-msgid "Size"
-msgstr "Tamanho"
-
 #: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
 #: appGUI/ObjectUI.py:316
 msgid "Dim"
@@ -3703,7 +3703,7 @@ msgstr "Adiciona uma nova abertura à lista de aberturas."
 #: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1132
 #: appObjects/FlatCAMGeometry.py:560 appTools/ToolIsolation.py:70
 #: appTools/ToolIsolation.py:3150 appTools/ToolNCC.py:69
-#: appTools/ToolNCC.py:3964 appTools/ToolPaint.py:143
+#: appTools/ToolNCC.py:4024 appTools/ToolPaint.py:143
 #: appTools/ToolPaint.py:2926 appTools/ToolSolderPaste.py:163
 #: appTools/ToolSolderPaste.py:1209 app_Main.py:6123
 msgid "Delete"
@@ -4125,20 +4125,20 @@ msgid "Open file"
 msgstr "Abrir arquivo"
 
 #: appEditors/AppTextEditor.py:255 appEditors/AppTextEditor.py:260
-#: appObjects/FlatCAMCNCJob.py:1641 appObjects/FlatCAMCNCJob.py:1646
-#: appObjects/FlatCAMCNCJob.py:1831 appObjects/FlatCAMCNCJob.py:1836
-#: appObjects/FlatCAMCNCJob.py:1909 appObjects/FlatCAMCNCJob.py:1914
+#: appObjects/FlatCAMCNCJob.py:1646 appObjects/FlatCAMCNCJob.py:1651
+#: appObjects/FlatCAMCNCJob.py:1836 appObjects/FlatCAMCNCJob.py:1841
+#: appObjects/FlatCAMCNCJob.py:1914 appObjects/FlatCAMCNCJob.py:1919
 #: appTools/ToolSolderPaste.py:1063 app_Main.py:7038 app_Main.py:7043
 msgid "Export Code ..."
 msgstr "Exportar código ..."
 
-#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1663
-#: appObjects/FlatCAMCNCJob.py:1853 appObjects/FlatCAMCNCJob.py:2302
+#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1668
+#: appObjects/FlatCAMCNCJob.py:1858 appObjects/FlatCAMCNCJob.py:2307
 #: appTools/ToolSolderPaste.py:1093
 msgid "No such file or directory"
 msgstr "Nenhum arquivo ou diretório"
 
-#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2316
+#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2321
 msgid "Saved to"
 msgstr "Salvo em"
 
@@ -4170,7 +4170,7 @@ msgstr "Salvar o G-Code"
 msgid "Start GCode"
 msgstr "Iniciando o G-Code"
 
-#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2007
+#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2012
 #: appTools/ToolCalibration.py:447
 msgid "Loaded Machine Code into Code Editor"
 msgstr "G-Code aberto no Editor de Códigos"
@@ -4190,7 +4190,7 @@ msgstr "Dia"
 
 #: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:999
 #: appGUI/ObjectUI.py:2009 appTools/ToolIsolation.py:3022
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 msgid "TT"
 msgstr "TF"
 
@@ -5250,9 +5250,9 @@ msgstr "Zoom -"
 msgid "Zoom Fit"
 msgstr "Zoom Ajustado"
 
-#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:2067
-msgid "&Command Line"
-msgstr "Linha de &Comando"
+#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:1154
+msgid "Command Line"
+msgstr "Linha de Comando"
 
 #: appGUI/MainGUI.py:924 appGUI/MainGUI.py:2079
 msgid "2Sided Tool"
@@ -5546,10 +5546,6 @@ msgstr "Alternar a exibição do eixo na tela"
 msgid "Preferences"
 msgstr "Preferências"
 
-#: appGUI/MainGUI.py:1154
-msgid "Command Line"
-msgstr "Linha de Comando"
-
 #: appGUI/MainGUI.py:1160
 msgid "HUD (Heads up display)"
 msgstr "HUD (Monitor de Alerta)"
@@ -5578,11 +5574,18 @@ msgstr ""
 "Medição absoluta.\n"
 "Em relação à posição (X=0, Y=0)"
 
+#: appGUI/MainGUI.py:1194
+#, fuzzy
+#| msgid "Show Shell"
+msgid "TCL Shell"
+msgstr "Mostrar Shell"
+
 #: appGUI/MainGUI.py:1221 appGUI/MainGUI.py:1470 app_Main.py:8143
 msgid "Project"
 msgstr "Projeto"
 
-#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272
+#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272 appGUI/MainGUI.py:3791
+#: appGUI/MainGUI.py:3797
 msgid "Plot Area"
 msgstr "Área de Gráfico"
 
@@ -5675,7 +5678,7 @@ msgstr "Não salvará as alterações e fechará a janela de preferências."
 msgid "Toggle Visibility"
 msgstr "Alternar Visibilidade"
 
-#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2330
+#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2342
 msgid "New"
 msgstr "Novo"
 
@@ -5688,8 +5691,8 @@ msgstr "Novo"
 #: appTools/ToolDblSided.py:767 appTools/ToolFilm.py:929
 #: appTools/ToolFilm.py:952 appTools/ToolImage.py:136 appTools/ToolImage.py:191
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3338
-#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:803
-#: appTools/ToolNCC.py:3788 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:805
+#: appTools/ToolNCC.py:3848 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:587
@@ -5707,7 +5710,7 @@ msgstr "Geometria"
 #: appTools/ToolDblSided.py:527 appTools/ToolDblSided.py:724
 #: appTools/ToolDblSided.py:766 appTools/ToolFilm.py:1207
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPunchGerber.py:803 appTools/ToolPunchGerber.py:818
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:586
@@ -5824,12 +5827,16 @@ msgstr "Sim"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:148
 #: appTools/ToolDrilling.py:2090 appTools/ToolIsolation.py:3066
-#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3875
+#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3935
 #: appTools/ToolPaint.py:2851 appTranslation.py:113 appTranslation.py:215
 #: app_Main.py:2290 app_Main.py:3385 app_Main.py:5810 app_Main.py:6894
 msgid "No"
 msgstr "Não"
 
+#: appGUI/MainGUI.py:2067
+msgid "&Command Line"
+msgstr "Linha de &Comando"
+
 #: appGUI/MainGUI.py:2086
 msgid "&Cutout Tool"
 msgstr "Ferramenta de Re&corte"
@@ -6565,7 +6572,7 @@ msgstr ""
 "Cria um objeto Geometria com caminho de\n"
 "ferramenta para cortar em torno de polígonos."
 
-#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4315
+#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4375
 msgid ""
 "Create the Geometry Object\n"
 "for non-copper routing."
@@ -6632,7 +6639,7 @@ msgstr "A geometria resultante terá cantos arredondados."
 
 #: appGUI/ObjectUI.py:467 appGUI/ObjectUI.py:507 appTools/ToolCutOut.py:2287
 #: appTools/ToolCutOut.py:2302 appTools/ToolIsolation.py:3444
-#: appTools/ToolNCC.py:4312 appTools/ToolPaint.py:3178
+#: appTools/ToolNCC.py:4372 appTools/ToolPaint.py:3178
 msgid "Generate Geometry"
 msgstr "Gerar Geometria"
 
@@ -6986,14 +6993,14 @@ msgstr ""
 "e negativo para corte 'por dentro'."
 
 #: appGUI/ObjectUI.py:1079 appTools/ToolIsolation.py:3087
-#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3902 appTools/ToolPaint.py:140
+#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3962 appTools/ToolPaint.py:140
 #: appTools/ToolPaint.py:2878
 msgid "Add from DB"
 msgstr "Adicionar do BD"
 
 #: appGUI/ObjectUI.py:1096 appTools/ToolCutOut.py:2071
 #: appTools/ToolIsolation.py:61 appTools/ToolIsolation.py:3122
-#: appTools/ToolNCC.py:3936 appTools/ToolPaint.py:2898
+#: appTools/ToolNCC.py:3996 appTools/ToolPaint.py:2898
 msgid "Search and Add"
 msgstr ""
 
@@ -7007,14 +7014,14 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1103 appTools/ToolCutOut.py:2083
 #: appTools/ToolIsolation.py:65 appTools/ToolIsolation.py:3133
-#: appTools/ToolNCC.py:3947 appTools/ToolPaint.py:2909
+#: appTools/ToolNCC.py:4007 appTools/ToolPaint.py:2909
 #, fuzzy
 #| msgid "Add from DB"
 msgid "Pick from DB"
 msgstr "Adicionar do BD"
 
 #: appGUI/ObjectUI.py:1106 appTools/ToolCutOut.py:2086
-#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:3950
+#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:4010
 #: appTools/ToolPaint.py:2912
 #, fuzzy
 #| msgid ""
@@ -7061,8 +7068,8 @@ msgstr ""
 #: appTools/ToolMilling.py:779 appTools/ToolMilling.py:790
 #: appTools/ToolMilling.py:794 appTools/ToolMilling.py:1711
 #: appTools/ToolNCC.py:271 appTools/ToolNCC.py:276 appTools/ToolNCC.py:306
-#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
-#: appTools/ToolNCC.py:3980 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
+#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
+#: appTools/ToolNCC.py:4040 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
 #: appTools/ToolPaint.py:282 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:316 appTools/ToolPaint.py:655
 #: appTools/ToolPaint.py:2940
@@ -7071,7 +7078,7 @@ msgstr "Parâmetros para"
 
 #: appGUI/ObjectUI.py:1175 appTools/ToolDrilling.py:2119
 #: appTools/ToolIsolation.py:3169 appTools/ToolMilling.py:1714
-#: appTools/ToolNCC.py:3983 appTools/ToolPaint.py:2943
+#: appTools/ToolNCC.py:4043 appTools/ToolPaint.py:2943
 msgid ""
 "The data used for creating GCode.\n"
 "Each tool store it's own set of such data."
@@ -7213,7 +7220,7 @@ msgstr ""
 msgid "Number of time units for spindle to dwell."
 msgstr "Número de unidades de tempo para o fuso residir."
 
-#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2128
+#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2140
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333
@@ -7221,7 +7228,7 @@ msgstr "Número de unidades de tempo para o fuso residir."
 msgid "Probe Z depth"
 msgstr "Profundidade Z da Sonda"
 
-#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2130
+#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2142
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335
@@ -7240,7 +7247,7 @@ msgstr ""
 msgid "Feedrate Probe"
 msgstr "Avanço da Sonda"
 
-#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2143
+#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2155
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348
@@ -7250,13 +7257,13 @@ msgstr "Velocidade de Avanço usada enquanto a sonda está operando."
 
 #: appGUI/ObjectUI.py:1434 appTools/ToolDrilling.py:2364
 #: appTools/ToolIsolation.py:3265 appTools/ToolMilling.py:2042
-#: appTools/ToolNCC.py:4141 appTools/ToolPaint.py:3049
+#: appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3049
 msgid "Apply parameters to all tools"
 msgstr "Aplicar parâmetros a todas as ferramentas"
 
 #: appGUI/ObjectUI.py:1437 appTools/ToolDrilling.py:2367
 #: appTools/ToolIsolation.py:3268 appTools/ToolMilling.py:2045
-#: appTools/ToolNCC.py:4144 appTools/ToolPaint.py:3052
+#: appTools/ToolNCC.py:4204 appTools/ToolPaint.py:3052
 msgid ""
 "The parameters in the current form will be applied\n"
 "on all the tools from the Tool Table."
@@ -7266,13 +7273,13 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1448 appTools/ToolDrilling.py:2378
 #: appTools/ToolIsolation.py:3279 appTools/ToolMilling.py:2056
-#: appTools/ToolNCC.py:4155 appTools/ToolPaint.py:3063
+#: appTools/ToolNCC.py:4215 appTools/ToolPaint.py:3063
 msgid "Common Parameters"
 msgstr "Parâmetros Comuns"
 
 #: appGUI/ObjectUI.py:1450 appTools/ToolDrilling.py:2380
 #: appTools/ToolIsolation.py:3281 appTools/ToolMilling.py:2058
-#: appTools/ToolNCC.py:4157 appTools/ToolPaint.py:3065
+#: appTools/ToolNCC.py:4217 appTools/ToolPaint.py:3065
 msgid "Parameters that are common for all tools."
 msgstr "Parâmetros comuns à todas as ferramentas."
 
@@ -7470,7 +7477,7 @@ msgstr "Adiciona uma área de exclusão."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286
 #: appTools/ToolDrilling.py:2591 appTools/ToolIsolation.py:3427
-#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4285
+#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4345
 #: appTools/ToolPaint.py:3165
 msgid "The kind of selection shape used for area selection."
 msgstr "O tipo de formato usado para a seleção de área."
@@ -7712,97 +7719,97 @@ msgstr ""
 msgid "Autolevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2052
+#: appGUI/ObjectUI.py:2053
 msgid "Enable the autolevelling feature."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2069
+#: appGUI/ObjectUI.py:2081
 #, fuzzy
 #| msgid "Tools Table"
 msgid "Probe Points Table"
 msgstr "Tabela de Ferramentas"
 
-#: appGUI/ObjectUI.py:2070
+#: appGUI/ObjectUI.py:2082
 msgid "Generate GCode that will obtain the height map"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2072
+#: appGUI/ObjectUI.py:2084
 msgid "Show"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2073
+#: appGUI/ObjectUI.py:2085
 #, fuzzy
 #| msgid "Toggle the display of axis on canvas"
 msgid "Toggle the display of the Probe Points table."
 msgstr "Alternar a exibição do eixo na tela"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 #, fuzzy
 #| msgid "Coordinates"
 msgid "X-Y Coordinates"
 msgstr "Coordenadas"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 #, fuzzy
 #| msgid "Light"
 msgid "Height"
 msgstr "Claro"
 
-#: appGUI/ObjectUI.py:2090
+#: appGUI/ObjectUI.py:2102
 #, fuzzy
 #| msgid "Plot Options"
 msgid "Plot probing points"
 msgstr "Opções de Gráfico"
 
-#: appGUI/ObjectUI.py:2092
+#: appGUI/ObjectUI.py:2104
 msgid ""
 "Plot the probing points in the table.\n"
 "If a Voronoi method is used then\n"
 "the Voronoi areas are also plotted."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2107
+#: appGUI/ObjectUI.py:2119
 #, fuzzy
 #| msgid "Finished G-Code generation"
 msgid "Probe GCode Generation"
 msgstr "Geração de G-Code concluída"
 
-#: appGUI/ObjectUI.py:2109
+#: appGUI/ObjectUI.py:2121
 msgid ""
 "Will create a GCode which will be sent to the controller,\n"
 "either through a file or directly, with the intent to get the height map\n"
 "that is to modify the original GCode to level the cutting height."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2116
+#: appGUI/ObjectUI.py:2128
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
 #, fuzzy
 #| msgid "Probe Z depth"
 msgid "Probe Z travel"
 msgstr "Profundidade Z da Sonda"
 
-#: appGUI/ObjectUI.py:2118
+#: appGUI/ObjectUI.py:2130
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
 #, fuzzy
 #| msgid "Height (Z) for travelling between the points."
 msgid "The safe Z for probe travelling between probe points."
 msgstr "Altura (Z) para deslocamento entre os pontos."
 
-#: appGUI/ObjectUI.py:2141
+#: appGUI/ObjectUI.py:2153
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
 #, fuzzy
 #| msgid "Feedrate"
 msgid "Probe Feedrate"
 msgstr "Taxa de Avanço"
 
-#: appGUI/ObjectUI.py:2158
+#: appGUI/ObjectUI.py:2170
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
 #, fuzzy
 #| msgid "Mode:"
 msgid "Mode"
 msgstr "Modo:"
 
-#: appGUI/ObjectUI.py:2159
+#: appGUI/ObjectUI.py:2171
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
 msgid ""
 "Choose a mode for height map generation.\n"
@@ -7810,21 +7817,21 @@ msgid ""
 "- Grid: will automatically generate a grid of probe points"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2165
+#: appGUI/ObjectUI.py:2177
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
 #: appTools/ToolCutOut.py:2324 appTools/ToolFiducials.py:801
 msgid "Manual"
 msgstr "Manual"
 
-#: appGUI/ObjectUI.py:2166
+#: appGUI/ObjectUI.py:2178
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
 #, fuzzy
 #| msgid "Grids"
 msgid "Grid"
 msgstr "Grades"
 
-#: appGUI/ObjectUI.py:2173
+#: appGUI/ObjectUI.py:2185
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
 msgid ""
 "Choose a method for approximation of heights from autolevelling data.\n"
@@ -7832,125 +7839,125 @@ msgid ""
 "- Bilinear: will use bilinear interpolation. Usable only for grid mode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2179
+#: appGUI/ObjectUI.py:2191
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
 msgid "Voronoi"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2180
+#: appGUI/ObjectUI.py:2192
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
 #, fuzzy
 #| msgid "Linear"
 msgid "Bilinear"
 msgstr "Linear"
 
-#: appGUI/ObjectUI.py:2193
+#: appGUI/ObjectUI.py:2205
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
 #: appTools/ToolPanelize.py:787
 msgid "Columns"
 msgstr "Colunas"
 
-#: appGUI/ObjectUI.py:2195
+#: appGUI/ObjectUI.py:2207
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
 msgid "The number of grid columns."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2204
+#: appGUI/ObjectUI.py:2216
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
 #: appTools/ToolPanelize.py:797
 msgid "Rows"
 msgstr "Linhas"
 
-#: appGUI/ObjectUI.py:2206
+#: appGUI/ObjectUI.py:2218
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
 msgid "The number of gird rows."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2211
+#: appGUI/ObjectUI.py:2223
 #, fuzzy
 #| msgid "Get Points"
 msgid "Add Probe Points"
 msgstr "Obter Pontos"
 
-#: appGUI/ObjectUI.py:2219
+#: appGUI/ObjectUI.py:2231
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
 #, fuzzy
 #| msgid "Contour"
 msgid "Controller"
 msgstr "Contorno"
 
-#: appGUI/ObjectUI.py:2221
+#: appGUI/ObjectUI.py:2233
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
 msgid ""
 "The kind of controller for which to generate\n"
 "height map gcode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2267 appGUI/ObjectUI.py:2282
-#: appObjects/FlatCAMCNCJob.py:1302 appObjects/FlatCAMCNCJob.py:1324
+#: appGUI/ObjectUI.py:2279 appGUI/ObjectUI.py:2294
+#: appObjects/FlatCAMCNCJob.py:1307 appObjects/FlatCAMCNCJob.py:1329
 #, fuzzy
 #| msgid "Contour"
 msgid "Control"
 msgstr "Contorno"
 
-#: appGUI/ObjectUI.py:2277 appGUI/ObjectUI.py:2284
-#: appObjects/FlatCAMCNCJob.py:1304 appObjects/FlatCAMCNCJob.py:1326
+#: appGUI/ObjectUI.py:2289 appGUI/ObjectUI.py:2296
+#: appObjects/FlatCAMCNCJob.py:1309 appObjects/FlatCAMCNCJob.py:1331
 #, fuzzy
 #| msgid "Rendered"
 msgid "Sender"
 msgstr "Processado"
 
-#: appGUI/ObjectUI.py:2298
+#: appGUI/ObjectUI.py:2310
 msgid "COM list"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2300 appGUI/ObjectUI.py:2315
+#: appGUI/ObjectUI.py:2312 appGUI/ObjectUI.py:2327
 msgid "Lists the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2304
+#: appGUI/ObjectUI.py:2316
 msgid "Search"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2306
+#: appGUI/ObjectUI.py:2318
 msgid "Search for the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2313
+#: appGUI/ObjectUI.py:2325
 msgid "Baud rates"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2332
+#: appGUI/ObjectUI.py:2344
 msgid "New, custom baudrate."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2340
+#: appGUI/ObjectUI.py:2352
 msgid "Add the specified custom baudrate to the list."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2346
+#: appGUI/ObjectUI.py:2358
 #, fuzzy
 #| msgid "Delete Selected"
 msgid "Delete selected baudrate"
 msgstr "Excluir Selecionado"
 
-#: appGUI/ObjectUI.py:2350
+#: appGUI/ObjectUI.py:2362
 msgid "Reset"
 msgstr "Redefinir"
 
-#: appGUI/ObjectUI.py:2352
+#: appGUI/ObjectUI.py:2364
 msgid "Software reset of the controller."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2358 appObjects/FlatCAMCNCJob.py:1318
+#: appGUI/ObjectUI.py:2370 appObjects/FlatCAMCNCJob.py:1323
 #, fuzzy
 #| msgid "Connect"
 msgid "Disconnected"
 msgstr "Conectar"
 
-#: appGUI/ObjectUI.py:2360
+#: appGUI/ObjectUI.py:2372
 #, fuzzy
 #| msgid ""
 #| "Create a Gerber object from the selected object, within\n"
@@ -7960,131 +7967,131 @@ msgstr ""
 "Cria um objeto Gerber a partir do objeto selecionado, dentro\n"
 "da caixa especificada."
 
-#: appGUI/ObjectUI.py:2385
+#: appGUI/ObjectUI.py:2397
 msgid "Jog"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2393
+#: appGUI/ObjectUI.py:2405
 #, fuzzy
 #| msgid "Zeros"
 msgid "Zero Axes"
 msgstr "Zeros"
 
-#: appGUI/ObjectUI.py:2426
+#: appGUI/ObjectUI.py:2438
 msgid "Pause/Resume"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2448
+#: appGUI/ObjectUI.py:2460
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
 msgid "Step"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2450
+#: appGUI/ObjectUI.py:2462
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
 msgid "Each jog action will move the axes with this value."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2462
+#: appGUI/ObjectUI.py:2474
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89
 #: appObjects/FlatCAMObj.py:831 appTools/ToolProperties.py:529
 msgid "Feedrate"
 msgstr "Taxa de Avanço"
 
-#: appGUI/ObjectUI.py:2464
+#: appGUI/ObjectUI.py:2476
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
 msgid "Feedrate when jogging."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2484
+#: appGUI/ObjectUI.py:2496
 msgid "Send Command"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2486 appGUI/ObjectUI.py:2496
+#: appGUI/ObjectUI.py:2498 appGUI/ObjectUI.py:2508
 msgid "Send a custom command to GRBL."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2491
+#: appGUI/ObjectUI.py:2503
 msgid "Type GRBL command ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2494
+#: appGUI/ObjectUI.py:2506
 msgid "Send"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2502
+#: appGUI/ObjectUI.py:2514
 #, fuzzy
 #| msgid "Text to PDF parameters"
 msgid "Get Config parameter"
 msgstr "Parâmetros de texto para PDF"
 
-#: appGUI/ObjectUI.py:2504
+#: appGUI/ObjectUI.py:2516
 msgid "A GRBL configuration parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2509
+#: appGUI/ObjectUI.py:2521
 msgid "Type GRBL parameter ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2512
+#: appGUI/ObjectUI.py:2524
 #, fuzzy
 #| msgid "Geo"
 msgid "Get"
 msgstr "Geo"
 
-#: appGUI/ObjectUI.py:2514
+#: appGUI/ObjectUI.py:2526
 msgid "Get the value of a specified GRBL parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2522
+#: appGUI/ObjectUI.py:2534
 #, fuzzy
 #| msgid "Gerber Export"
 msgid "Get Report"
 msgstr "Exportar Gerber"
 
-#: appGUI/ObjectUI.py:2524
+#: appGUI/ObjectUI.py:2536
 msgid "Print in shell the GRBL report."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2530
+#: appGUI/ObjectUI.py:2542
 msgid "Apply AutoLevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2532
+#: appGUI/ObjectUI.py:2544
 msgid ""
 "Will send the probing GCode to the GRBL controller,\n"
 "wait for the Z probing data and then apply this data\n"
 "over the original GCode therefore doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2541
+#: appGUI/ObjectUI.py:2553
 msgid "Will save the GRBL height map."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2551
+#: appGUI/ObjectUI.py:2563
 #, fuzzy
 #| msgid "Starting G-Code"
 msgid "Save Probing GCode"
 msgstr "Iniciando o G-Code"
 
-#: appGUI/ObjectUI.py:2553
+#: appGUI/ObjectUI.py:2565
 #, fuzzy
 #| msgid "Starting G-Code"
 msgid "Will save the probing GCode."
 msgstr "Iniciando o G-Code"
 
-#: appGUI/ObjectUI.py:2562
+#: appGUI/ObjectUI.py:2574
 msgid "View/Edit the probing GCode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2569 appObjects/FlatCAMCNCJob.py:1735
-#: appObjects/FlatCAMCNCJob.py:1739
+#: appGUI/ObjectUI.py:2581 appObjects/FlatCAMCNCJob.py:1740
+#: appObjects/FlatCAMCNCJob.py:1744
 #, fuzzy
 #| msgid "Import List"
 msgid "Import Height Map"
 msgstr "Importar Lista"
 
-#: appGUI/ObjectUI.py:2571
+#: appGUI/ObjectUI.py:2583
 msgid ""
 "Import the file that has the Z heights\n"
 "obtained through probing and then apply this data\n"
@@ -8092,11 +8099,11 @@ msgid ""
 "doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2589
+#: appGUI/ObjectUI.py:2601
 msgid "Export CNC Code"
 msgstr "Exportar Código CNC"
 
-#: appGUI/ObjectUI.py:2591
+#: appGUI/ObjectUI.py:2603
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
 msgid ""
@@ -8106,95 +8113,95 @@ msgstr ""
 "Exporta e salva em arquivo\n"
 "o G-Code para fazer este objeto."
 
-#: appGUI/ObjectUI.py:2600
+#: appGUI/ObjectUI.py:2612
 msgid "Save CNC Code"
 msgstr "Salvar Código CNC"
 
-#: appGUI/ObjectUI.py:2603
+#: appGUI/ObjectUI.py:2615
 msgid ""
 "Opens dialog to save G-Code\n"
 "file."
 msgstr "Abre uma caixa de diálogo para salvar o arquivo G-Code."
 
-#: appGUI/ObjectUI.py:2610
+#: appGUI/ObjectUI.py:2622
 #, fuzzy
 #| msgid "View CNC Code"
 msgid "Review CNC Code."
 msgstr "Ver Código CNC"
 
-#: appGUI/ObjectUI.py:2671
+#: appGUI/ObjectUI.py:2683
 msgid "Script Object"
 msgstr "Objeto Script"
 
-#: appGUI/ObjectUI.py:2691 appGUI/ObjectUI.py:2765
+#: appGUI/ObjectUI.py:2703 appGUI/ObjectUI.py:2777
 msgid "Auto Completer"
 msgstr "Preenchimento Automático"
 
-#: appGUI/ObjectUI.py:2693
+#: appGUI/ObjectUI.py:2705
 msgid "This selects if the auto completer is enabled in the Script Editor."
 msgstr ""
 "Selecionar se o preenchimento automático está ativado no Editor de Scripts."
 
-#: appGUI/ObjectUI.py:2738
+#: appGUI/ObjectUI.py:2750
 msgid "Document Object"
 msgstr "Objeto Documento"
 
-#: appGUI/ObjectUI.py:2767
+#: appGUI/ObjectUI.py:2779
 msgid "This selects if the auto completer is enabled in the Document Editor."
 msgstr ""
 "Selecionar se o preenchimento automático está ativado no Editor de "
 "Documentos."
 
-#: appGUI/ObjectUI.py:2785
+#: appGUI/ObjectUI.py:2797
 msgid "Font Type"
 msgstr "Tipo de Fonte"
 
-#: appGUI/ObjectUI.py:2802
+#: appGUI/ObjectUI.py:2814
 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
 msgid "Font Size"
 msgstr "Tamanho da Fonte"
 
-#: appGUI/ObjectUI.py:2838
+#: appGUI/ObjectUI.py:2850
 msgid "Alignment"
 msgstr "Alinhamento"
 
-#: appGUI/ObjectUI.py:2843
+#: appGUI/ObjectUI.py:2855
 msgid "Align Left"
 msgstr "Esquerda"
 
-#: appGUI/ObjectUI.py:2848 app_Main.py:4993
+#: appGUI/ObjectUI.py:2860 app_Main.py:4993
 msgid "Center"
 msgstr "Centro"
 
-#: appGUI/ObjectUI.py:2853
+#: appGUI/ObjectUI.py:2865
 msgid "Align Right"
 msgstr "Direita"
 
-#: appGUI/ObjectUI.py:2858
+#: appGUI/ObjectUI.py:2870
 msgid "Justify"
 msgstr "Justificado"
 
-#: appGUI/ObjectUI.py:2865
+#: appGUI/ObjectUI.py:2877
 msgid "Font Color"
 msgstr "Cor da Fonte"
 
-#: appGUI/ObjectUI.py:2867
+#: appGUI/ObjectUI.py:2879
 msgid "Set the font color for the selected text"
 msgstr "Define a cor da fonte para o texto selecionado"
 
-#: appGUI/ObjectUI.py:2881
+#: appGUI/ObjectUI.py:2893
 msgid "Selection Color"
 msgstr "Cor da Seleção"
 
-#: appGUI/ObjectUI.py:2883
+#: appGUI/ObjectUI.py:2895
 msgid "Set the selection color when doing text selection."
 msgstr "Define a cor da seleção quando selecionando texto."
 
-#: appGUI/ObjectUI.py:2897
+#: appGUI/ObjectUI.py:2909
 msgid "Tab Size"
 msgstr "Tamanho da Aba"
 
-#: appGUI/ObjectUI.py:2899
+#: appGUI/ObjectUI.py:2911
 msgid "Set the tab size. In pixels. Default value is 80 pixels."
 msgstr "Define o tamanho da aba, em pixels. Valor padrão: 80 pixels."
 
@@ -10338,10 +10345,10 @@ msgstr "\"Segue\""
 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64
 #: appObjects/FlatCAMGerber.py:370 appTools/ToolCopperThieving.py:581
 #: appTools/ToolCopperThieving.py:770 appTools/ToolCopperThieving.py:782
-#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1791
-#: appTools/ToolNCC.py:1818 appTools/ToolNCC.py:1926 appTools/ToolNCC.py:1939
-#: appTools/ToolNCC.py:2785 appTools/ToolNCC.py:2890 appTools/ToolNCC.py:2905
-#: appTools/ToolNCC.py:3171 appTools/ToolNCC.py:3272 appTools/ToolNCC.py:3287
+#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1793
+#: appTools/ToolNCC.py:1820 appTools/ToolNCC.py:1928 appTools/ToolNCC.py:1941
+#: appTools/ToolNCC.py:2845 appTools/ToolNCC.py:2950 appTools/ToolNCC.py:2965
+#: appTools/ToolNCC.py:3231 appTools/ToolNCC.py:3332 appTools/ToolNCC.py:3347
 #: camlib.py:1113
 msgid "Buffering"
 msgstr "Criando buffer"
@@ -10666,9 +10673,9 @@ msgstr ""
 
 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
-#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1349
-#: appTools/ToolNCC.py:1665 appTools/ToolNCC.py:1729 appTools/ToolNCC.py:2649
-#: appTools/ToolNCC.py:2658 appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4376
+#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1351
+#: appTools/ToolNCC.py:1667 appTools/ToolNCC.py:1731 appTools/ToolNCC.py:2709
+#: appTools/ToolNCC.py:2718 appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4436
 #: defaults.py:475 tclCommands/TclCommandCopperClear.py:190
 msgid "Itself"
 msgstr "Própria"
@@ -10679,8 +10686,8 @@ msgstr "Própria"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1219 appTools/ToolIsolation.py:819
 #: appTools/ToolIsolation.py:1435 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1363 appTools/ToolNCC.py:1681 appTools/ToolNCC.py:1736
-#: appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4386 appTools/ToolPaint.py:1061
+#: appTools/ToolNCC.py:1365 appTools/ToolNCC.py:1683 appTools/ToolNCC.py:1738
+#: appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4446 appTools/ToolPaint.py:1061
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3249
 msgid "Area Selection"
 msgstr "Seleção de Área"
@@ -10691,9 +10698,9 @@ msgstr "Seleção de Área"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1220 appTools/ToolDblSided.py:757
 #: appTools/ToolIsolation.py:1475 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1382 appTools/ToolNCC.py:1687 appTools/ToolNCC.py:1744
-#: appTools/ToolNCC.py:2122 appTools/ToolNCC.py:2356 appTools/ToolNCC.py:2694
-#: appTools/ToolNCC.py:4240 appTools/ToolPaint.py:1080
+#: appTools/ToolNCC.py:1384 appTools/ToolNCC.py:1689 appTools/ToolNCC.py:1746
+#: appTools/ToolNCC.py:2124 appTools/ToolNCC.py:2358 appTools/ToolNCC.py:2754
+#: appTools/ToolNCC.py:4300 appTools/ToolPaint.py:1080
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3232
 #: tclCommands/TclCommandCopperClear.py:192 tclCommands/TclCommandPaint.py:166
 msgid "Reference Object"
@@ -12023,7 +12030,7 @@ msgstr "Cria geometria para furação."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:140
 #: appTools/ToolDrilling.py:2082 appTools/ToolIsolation.py:3058
-#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3867
+#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3927
 #: appTools/ToolPaint.py:2843
 msgid "Tool order"
 msgstr "Ordem das Ferramentas"
@@ -12034,8 +12041,8 @@ msgstr "Ordem das Ferramentas"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141
 #: appTools/ToolDrilling.py:2083 appTools/ToolIsolation.py:3059
-#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3868
-#: appTools/ToolNCC.py:3878 appTools/ToolPaint.py:2844
+#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3928
+#: appTools/ToolNCC.py:3938 appTools/ToolPaint.py:2844
 #: appTools/ToolPaint.py:2854
 msgid ""
 "This set the way that the tools in the tools table are used.\n"
@@ -12060,7 +12067,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:149
 #: appTools/ToolDrilling.py:2091 appTools/ToolIsolation.py:3067
-#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3876
+#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3936
 #: appTools/ToolPaint.py:2852
 msgid "Forward"
 msgstr "Crescente"
@@ -12070,7 +12077,7 @@ msgstr "Crescente"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150
 #: appTools/ToolDrilling.py:2092 appTools/ToolIsolation.py:3068
-#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3877
+#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3937
 #: appTools/ToolPaint.py:2853
 msgid "Reverse"
 msgstr "Decrescente"
@@ -12426,7 +12433,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:242
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243
-#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4162
+#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4222
 #: appTools/ToolPaint.py:3069
 msgid "Rest"
 msgstr "Descansar"
@@ -12478,13 +12485,13 @@ msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:350
-#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4298
+#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4358
 msgid "Check validity"
 msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:352
-#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4300
+#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4360
 msgid ""
 "If checked then the tools diameters are verified\n"
 "if they will provide a complete isolation."
@@ -12605,7 +12612,7 @@ msgstr ""
 "A retirada de cobre terminará a uma distância dos recursos de cobre.\n"
 "O valor pode estar entre 0 e 9999.9 unidades FlatCAM."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4166
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4226
 msgid ""
 "If checked, use 'rest machining'.\n"
 "Basically it will clear copper outside PCB features,\n"
@@ -12622,7 +12629,7 @@ msgstr ""
 "retiradas com a ferramenta anterior.\n"
 "Se não estiver marcada, usa o algoritmo padrão."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4246
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4306
 msgid ""
 "Selection of area to be processed.\n"
 "- 'Itself' - the processing extent is based on the object that is "
@@ -12761,7 +12768,7 @@ msgstr "Número de linhas do painel desejado"
 #: appTools/ToolFilm.py:951 appTools/ToolImage.py:117 appTools/ToolImage.py:138
 #: appTools/ToolImage.py:191 appTools/ToolIsolation.py:802
 #: appTools/ToolIsolation.py:3339 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:3789 appTools/ToolNCC.py:4263
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:3849 appTools/ToolNCC.py:4323
 #: appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
 #: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167
 #: appTools/ToolPanelize.py:715 appTools/ToolPanelize.py:809
@@ -13284,33 +13291,33 @@ msgstr ""
 msgid "created/selected"
 msgstr "criado / selecionado"
 
-#: appObjects/FlatCAMCNCJob.py:637 appObjects/FlatCAMDocument.py:71
+#: appObjects/FlatCAMCNCJob.py:642 appObjects/FlatCAMDocument.py:71
 #: appObjects/FlatCAMScript.py:82
 msgid "<span style=\"color:green;\"><b>Basic</b></span>"
 msgstr "<span style=\"color:green;\"><b>Básico</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:644 appObjects/FlatCAMDocument.py:75
+#: appObjects/FlatCAMCNCJob.py:649 appObjects/FlatCAMDocument.py:75
 #: appObjects/FlatCAMScript.py:86
 msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
 msgstr "<span style=\"color:red;\"><b>Avançado</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:780 appObjects/FlatCAMCNCJob.py:1058
+#: appObjects/FlatCAMCNCJob.py:785 appObjects/FlatCAMCNCJob.py:1063
 msgid ""
 "Voronoi function can not be loaded.\n"
 "Shapely >= 1.8 is required"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:808
+#: appObjects/FlatCAMCNCJob.py:813
 #, fuzzy
 #| msgid "Click on Start point ..."
 msgid "Click on canvas to add a Probe Point..."
 msgstr "Clique no ponto inicial ..."
 
-#: appObjects/FlatCAMCNCJob.py:1004
+#: appObjects/FlatCAMCNCJob.py:1009
 msgid "Point is not within the object area. Choose another point."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1024
+#: appObjects/FlatCAMCNCJob.py:1029
 #, fuzzy
 #| msgid ""
 #| "Zone added. Click to start adding next zone or right click to finish."
@@ -13321,139 +13328,139 @@ msgstr ""
 "Zona adicionada. Clique para iniciar a adição da próxima zona ou clique com "
 "o botão direito para terminar."
 
-#: appObjects/FlatCAMCNCJob.py:1046
+#: appObjects/FlatCAMCNCJob.py:1051
 #, fuzzy
 #| msgid "Finished G-Code processing..."
 msgid "Finished adding Probe Points..."
 msgstr "Processamento do G-Code finalisado..."
 
-#: appObjects/FlatCAMCNCJob.py:1260
+#: appObjects/FlatCAMCNCJob.py:1265
 #, fuzzy
 #| msgid "Click to place ..."
 msgid "COM list updated ..."
 msgstr "Clique para colocar ..."
 
-#: appObjects/FlatCAMCNCJob.py:1296
+#: appObjects/FlatCAMCNCJob.py:1301
 #, fuzzy
 #| msgid "Connect"
 msgid "Connected"
 msgstr "Conectar"
 
-#: appObjects/FlatCAMCNCJob.py:1307
+#: appObjects/FlatCAMCNCJob.py:1312
 msgid "Port connected"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1311
+#: appObjects/FlatCAMCNCJob.py:1316
 msgid "Could not connect to GRBL on port"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1328
+#: appObjects/FlatCAMCNCJob.py:1333
 msgid "Port is connected. Disconnecting"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1330
+#: appObjects/FlatCAMCNCJob.py:1335
 #, fuzzy
 #| msgid "Could not retrieve box object"
 msgid "Could not connect to port"
 msgstr "Não foi possível recuperar o objeto caixa"
 
-#: appObjects/FlatCAMCNCJob.py:1360 appObjects/FlatCAMCNCJob.py:1790
+#: appObjects/FlatCAMCNCJob.py:1365 appObjects/FlatCAMCNCJob.py:1795
 #, fuzzy
 #| msgid "Opening G-Code."
 msgid "Sending GCode..."
 msgstr "Abrindo G-Code."
 
-#: appObjects/FlatCAMCNCJob.py:1489
+#: appObjects/FlatCAMCNCJob.py:1494
 msgid "GRBL is doing a home cycle."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1495
+#: appObjects/FlatCAMCNCJob.py:1500
 msgid "GRBL software reset was sent."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1503
+#: appObjects/FlatCAMCNCJob.py:1508
 msgid "GRBL resumed."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1507
+#: appObjects/FlatCAMCNCJob.py:1512
 msgid "GRBL paused."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1649 appObjects/FlatCAMCNCJob.py:1839
-#: appObjects/FlatCAMCNCJob.py:1924 appTools/ToolSolderPaste.py:1066
+#: appObjects/FlatCAMCNCJob.py:1654 appObjects/FlatCAMCNCJob.py:1844
+#: appObjects/FlatCAMCNCJob.py:1929 appTools/ToolSolderPaste.py:1066
 msgid "Export cancelled ..."
 msgstr "Exportar cancelado ..."
 
-#: appObjects/FlatCAMCNCJob.py:1673 appObjects/FlatCAMCNCJob.py:1960
+#: appObjects/FlatCAMCNCJob.py:1678 appObjects/FlatCAMCNCJob.py:1965
 #: appObjects/FlatCAMScript.py:134 app_Main.py:7824
 msgid "Loading..."
 msgstr "Lendo..."
 
-#: appObjects/FlatCAMCNCJob.py:1677
+#: appObjects/FlatCAMCNCJob.py:1682
 #, fuzzy
 #| msgid "There is no such parameter"
 msgid "There is nothing to view"
 msgstr "Não existe esse parâmetro"
 
-#: appObjects/FlatCAMCNCJob.py:1683
+#: appObjects/FlatCAMCNCJob.py:1688
 #, fuzzy
 #| msgid "Gcode Viewer"
 msgid "Code Viewer"
 msgstr "G-Code Viewer"
 
-#: appObjects/FlatCAMCNCJob.py:1721
+#: appObjects/FlatCAMCNCJob.py:1726
 #, fuzzy
 #| msgid "Loaded Machine Code into Code Editor"
 msgid "Loaded Machine Code into Code Viewer"
 msgstr "G-Code aberto no Editor de Códigos"
 
-#: appObjects/FlatCAMCNCJob.py:1766
+#: appObjects/FlatCAMCNCJob.py:1771
 #, fuzzy
 #| msgid "Failed to open config file"
 msgid "Failed to open height map file"
 msgstr "Falha ao abrir o arquivo de configuração"
 
-#: appObjects/FlatCAMCNCJob.py:1816
+#: appObjects/FlatCAMCNCJob.py:1821
 msgid "Finished probing. Doing the autolevelling."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1821
+#: appObjects/FlatCAMCNCJob.py:1826
 msgid "Sending probing GCode to the GRBL controller."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1862
+#: appObjects/FlatCAMCNCJob.py:1867
 msgid "Empty GRBL heightmap."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1866
+#: appObjects/FlatCAMCNCJob.py:1871
 #, fuzzy
 #| msgid "Finished G-Code processing..."
 msgid "Finished autolevelling."
 msgstr "Processamento do G-Code finalisado..."
 
-#: appObjects/FlatCAMCNCJob.py:1880
+#: appObjects/FlatCAMCNCJob.py:1885
 msgid "Plotting..."
 msgstr "Plotando..."
 
-#: appObjects/FlatCAMCNCJob.py:1950
+#: appObjects/FlatCAMCNCJob.py:1955
 msgid "File saved to"
 msgstr "Arquivo salvo em"
 
-#: appObjects/FlatCAMCNCJob.py:1974
+#: appObjects/FlatCAMCNCJob.py:1979
 #, fuzzy
 #| msgid "Gcode Viewer"
 msgid "Code Review"
 msgstr "G-Code Viewer"
 
-#: appObjects/FlatCAMCNCJob.py:2157
+#: appObjects/FlatCAMCNCJob.py:2162
 msgid "This CNCJob object can't be processed because it is a"
 msgstr "Este objeto Trabalho CNC não pode ser processado porque é um"
 
-#: appObjects/FlatCAMCNCJob.py:2159
+#: appObjects/FlatCAMCNCJob.py:2164
 msgid "CNCJob object"
 msgstr "Objeto de Trabalho CNC"
 
-#: appObjects/FlatCAMCNCJob.py:2269
+#: appObjects/FlatCAMCNCJob.py:2274
 msgid ""
 "G-code does not have a G94 code.\n"
 "Append Code snippet will not be used.."
@@ -13514,7 +13521,7 @@ msgstr "Acabamento"
 #: appTools/ToolIsolation.py:531 appTools/ToolIsolation.py:644
 #: appTools/ToolIsolation.py:710 appTools/ToolMilling.py:628
 #: appTools/ToolMilling.py:749 appTools/ToolMilling.py:794
-#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
+#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
 #: appTools/ToolPaint.py:252 appTools/ToolPaint.py:316
 #: appTools/ToolPaint.py:655
 msgid "Multiple Tools"
@@ -13697,7 +13704,7 @@ msgstr "Não foi possível executar a operação."
 
 #: appObjects/FlatCAMGerber.py:558 appObjects/FlatCAMGerber.py:632
 #: appTools/ToolIsolation.py:1583 appTools/ToolIsolation.py:1951
-#: appTools/ToolNCC.py:1854 appTools/ToolNCC.py:2819 appTools/ToolNCC.py:3198
+#: appTools/ToolNCC.py:1856 appTools/ToolNCC.py:2879 appTools/ToolNCC.py:3258
 msgid "Isolation geometry could not be generated."
 msgstr "A geometria de isolação não pôde ser gerada."
 
@@ -14116,7 +14123,7 @@ msgstr ""
 #: appTools/ToolEtchCompensation.py:458 appTools/ToolExtractDrills.py:702
 #: appTools/ToolFiducials.py:932 appTools/ToolFilm.py:1383
 #: appTools/ToolInvertGerber.py:286 appTools/ToolIsolation.py:3477
-#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4328
+#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4388
 #: appTools/ToolOptimal.py:593 appTools/ToolPaint.py:3194
 #: appTools/ToolPanelize.py:889 appTools/ToolPunchGerber.py:993
 #: appTools/ToolQRCode.py:904 appTools/ToolRulesCheck.py:1618
@@ -14132,7 +14139,7 @@ msgstr "Redefinir Ferramenta"
 #: appTools/ToolEtchCompensation.py:461 appTools/ToolExtractDrills.py:705
 #: appTools/ToolFiducials.py:935 appTools/ToolFilm.py:1386
 #: appTools/ToolInvertGerber.py:289 appTools/ToolIsolation.py:3480
-#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4331
+#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4391
 #: appTools/ToolOptimal.py:596 appTools/ToolPaint.py:3197
 #: appTools/ToolPanelize.py:892 appTools/ToolPunchGerber.py:996
 #: appTools/ToolQRCode.py:907 appTools/ToolRulesCheck.py:1621
@@ -14576,8 +14583,8 @@ msgstr "Área de Adição de Cobre."
 #: appTools/ToolIsolation.py:908 appTools/ToolIsolation.py:1345
 #: appTools/ToolIsolation.py:1372 appTools/ToolMilling.py:424
 #: appTools/ToolMilling.py:639 appTools/ToolMilling.py:1322
-#: appTools/ToolNCC.py:844 appTools/ToolNCC.py:1306 appTools/ToolNCC.py:1355
-#: appTools/ToolNCC.py:1388 appTools/ToolPaint.py:1086
+#: appTools/ToolNCC.py:846 appTools/ToolNCC.py:1308 appTools/ToolNCC.py:1357
+#: appTools/ToolNCC.py:1390 appTools/ToolPaint.py:1086
 #: appTools/ToolPanelize.py:191 appTools/ToolPanelize.py:205
 #: appTools/ToolSub.py:157 appTools/ToolSub.py:170 appTools/ToolSub.py:359
 #: appTools/ToolSub.py:372 tclCommands/TclCommandCopperClear.py:97
@@ -14609,7 +14616,7 @@ msgstr ""
 
 #: appTools/ToolCopperThieving.py:599 appTools/ToolFilm.py:631
 #: appTools/ToolFilm.py:879 appTools/ToolIsolation.py:916
-#: appTools/ToolNCC.py:851 appTools/ToolOptimal.py:145
+#: appTools/ToolNCC.py:853 appTools/ToolOptimal.py:145
 #: appTools/ToolPanelize.py:612 appTools/ToolRulesCheck.py:626
 msgid "Working..."
 msgstr "Trabalhando..."
@@ -14618,13 +14625,13 @@ msgstr "Trabalhando..."
 msgid "Geometry not supported for bounding box"
 msgstr "Geometria não suportada para caixa delimitadora"
 
-#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1679
-#: appTools/ToolNCC.py:1734 appTools/ToolNCC.py:2674 appTools/ToolPaint.py:2457
+#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1681
+#: appTools/ToolNCC.py:1736 appTools/ToolNCC.py:2734 appTools/ToolPaint.py:2457
 msgid "No object available."
 msgstr "Nenhum objeto disponível."
 
-#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1704
-#: appTools/ToolNCC.py:1757 appTools/ToolNCC.py:2716
+#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1706
+#: appTools/ToolNCC.py:1759 appTools/ToolNCC.py:2776
 msgid "The reference object type is not supported."
 msgstr "O tipo do objeto de referência não é suportado."
 
@@ -14682,7 +14689,7 @@ msgstr ""
 "por outro objeto."
 
 #: appTools/ToolCopperThieving.py:1231 appTools/ToolIsolation.py:3385
-#: appTools/ToolNCC.py:4257 appTools/ToolPaint.py:3137
+#: appTools/ToolNCC.py:4317 appTools/ToolPaint.py:3137
 msgid "Ref. Type"
 msgstr "Tipo de Ref"
 
@@ -14695,12 +14702,12 @@ msgstr ""
 "Pode ser Gerber, Excellon ou Geometria."
 
 #: appTools/ToolCopperThieving.py:1242 appTools/ToolIsolation.py:3396
-#: appTools/ToolNCC.py:4267 appTools/ToolPaint.py:3147
+#: appTools/ToolNCC.py:4327 appTools/ToolPaint.py:3147
 msgid "Ref. Object"
 msgstr "Objeto de Ref"
 
 #: appTools/ToolCopperThieving.py:1244 appTools/ToolIsolation.py:3398
-#: appTools/ToolNCC.py:4269 appTools/ToolPaint.py:3149
+#: appTools/ToolNCC.py:4329 appTools/ToolPaint.py:3149
 msgid "The FlatCAM object to be used as non copper clearing reference."
 msgstr "O objeto FlatCAM a ser usado como referência para retirada de cobre."
 
@@ -14832,7 +14839,7 @@ msgstr "Adicionará marcadores de canto ao arquivo Gerber selecionado."
 
 #: appTools/ToolCutOut.py:281 appTools/ToolIsolation.py:791
 #: appTools/ToolIsolation.py:1049 appTools/ToolIsolation.py:1185
-#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:990 appTools/ToolNCC.py:1128
+#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:992 appTools/ToolNCC.py:1130
 #: appTools/ToolPaint.py:395 appTools/ToolPaint.py:686
 #: appTools/ToolPaint.py:823 appTools/ToolSolderPaste.py:131
 #: appTools/ToolSolderPaste.py:464 app_Main.py:4490
@@ -14842,14 +14849,14 @@ msgstr ""
 "Flutuante."
 
 #: appTools/ToolCutOut.py:357 appTools/ToolIsolation.py:1130
-#: appTools/ToolNCC.py:1073 appTools/ToolPaint.py:767
+#: appTools/ToolNCC.py:1075 appTools/ToolPaint.py:767
 #, fuzzy
 #| msgid "Tools in Tools Database edited but not saved."
 msgid "Tool not in Tools Database. Adding a default tool."
 msgstr "Ferramenta editada, mas não salva."
 
 #: appTools/ToolCutOut.py:364 appTools/ToolDrilling.py:955
-#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1080
+#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1082
 #: appTools/ToolPaint.py:775
 msgid ""
 "Cancelled.\n"
@@ -14869,7 +14876,7 @@ msgid "Default tool added."
 msgstr "Valores Padrão"
 
 #: appTools/ToolCutOut.py:466 appTools/ToolIsolation.py:2577
-#: appTools/ToolNCC.py:3649 appTools/ToolPaint.py:2620
+#: appTools/ToolNCC.py:3709 appTools/ToolPaint.py:2620
 msgid "Selected tool can't be used here. Pick another."
 msgstr ""
 
@@ -14921,7 +14928,7 @@ msgstr "Recorte concluído."
 #: appTools/ToolEtchCompensation.py:158 appTools/ToolInvertGerber.py:105
 #: appTools/ToolIsolation.py:912 appTools/ToolIsolation.py:1349
 #: appTools/ToolIsolation.py:1376 appTools/ToolMilling.py:1326
-#: appTools/ToolNCC.py:848 appTools/ToolNCC.py:1310 appTools/ToolPaint.py:1003
+#: appTools/ToolNCC.py:850 appTools/ToolNCC.py:1312 appTools/ToolPaint.py:1003
 #: appTools/ToolPanelize.py:196 tclCommands/TclCommandBbox.py:71
 #: tclCommands/TclCommandNregions.py:71
 msgid "Object not found"
@@ -15030,7 +15037,7 @@ msgstr ""
 "de objetos que preencherão a caixa de combinação 'Objeto'."
 
 #: appTools/ToolCutOut.py:2074 appTools/ToolIsolation.py:3125
-#: appTools/ToolNCC.py:3939 appTools/ToolPaint.py:2901
+#: appTools/ToolNCC.py:3999 appTools/ToolPaint.py:2901
 msgid ""
 "Add a new tool to the Tool Table\n"
 "with the diameter specified above.\n"
@@ -16279,7 +16286,7 @@ msgstr "Nova Ferramenta"
 msgid "Adding Tool cancelled"
 msgstr "Adicionar ferramenta cancelada"
 
-#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:879
+#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:881
 #: appTools/ToolOptimal.py:179
 msgid ""
 "The Gerber object has one Polygon as geometry.\n"
@@ -16288,7 +16295,7 @@ msgstr ""
 "O objeto Gerber possui um polígono como geometria.\n"
 "Não há distâncias entre os elementos geométricos a serem encontrados."
 
-#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:924
+#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:926
 #, fuzzy
 #| msgid "tooldia = tool diameter"
 msgid "Optimal tool diameter found"
@@ -16296,7 +16303,7 @@ msgstr "tooldia = diâmetro da ferramenta"
 
 #: appTools/ToolIsolation.py:1000 appTools/ToolIsolation.py:1508
 #: appTools/ToolIsolation.py:1710 appTools/ToolIsolation.py:1897
-#: appTools/ToolNCC.py:935 appTools/ToolNCC.py:1343 appTools/ToolPaint.py:1031
+#: appTools/ToolNCC.py:937 appTools/ToolNCC.py:1345 appTools/ToolPaint.py:1031
 #: appTools/ToolPaint.py:1744
 #, fuzzy
 #| msgid "Failed. No tool selected in the tool table ..."
@@ -16310,43 +16317,43 @@ msgstr ""
 
 #: appTools/ToolIsolation.py:1057 appTools/ToolIsolation.py:1144
 #: appTools/ToolIsolation.py:1206 appTools/ToolIsolation.py:2626
-#: appTools/ToolNCC.py:999 appTools/ToolNCC.py:1087 appTools/ToolNCC.py:1149
-#: appTools/ToolNCC.py:3698 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
+#: appTools/ToolNCC.py:1001 appTools/ToolNCC.py:1089 appTools/ToolNCC.py:1151
+#: appTools/ToolNCC.py:3758 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
 #: appTools/ToolPaint.py:844 appTools/ToolPaint.py:2676
 #: appTools/ToolSolderPaste.py:488
 msgid "Cancelled. Tool already in Tool Table."
 msgstr "Cancelada. Ferramenta já está na Tabela de Ferramentas."
 
-#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1115
+#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1117
 #: appTools/ToolPaint.py:810
 #, fuzzy
 #| msgid "New tool added to Tool Table."
 msgid "New tool added to Tool Table from Tools Database."
 msgstr "Nova ferramenta adicionada à Tabela de Ferramentas."
 
-#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1179
+#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1181
 #: appTools/ToolPaint.py:873
 #, fuzzy
 #| msgid "New tool added to Tool Table."
 msgid "Default tool added to Tool Table."
 msgstr "Nova ferramenta adicionada à Tabela de Ferramentas."
 
-#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1205
+#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1207
 #: appTools/ToolPaint.py:898
 msgid "Tool from Tool Table was edited."
 msgstr "A ferramenta da Tabela de Ferramentas foi editada."
 
-#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1218
+#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1220
 #: appTools/ToolPaint.py:911 appTools/ToolSolderPaste.py:548
 msgid "Cancelled. New diameter value is already in the Tool Table."
 msgstr "Cancelado. O novo valor de diâmetro já está na tabela de ferramentas."
 
-#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1269
+#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1271
 #: appTools/ToolPaint.py:961
 msgid "Delete failed. Select a tool to delete."
 msgstr "Exclusão falhou. Selecione uma ferramenta para excluir."
 
-#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1275
+#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1277
 #: appTools/ToolPaint.py:967
 msgid "Tool(s) deleted from Tool Table."
 msgstr "Ferramenta(s) excluída(s) da Tabela de Ferramentas."
@@ -16441,12 +16448,12 @@ msgstr "Nenhum polígono na seleção."
 msgid "Click the end point of the paint area."
 msgstr "Clique no ponto final da área."
 
-#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3662
+#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3722
 #: appTools/ToolPaint.py:2633 app_Main.py:5773 app_Main.py:5783
 msgid "Tool from DB added in Tool Table."
 msgstr "Ferramenta do Banco de Dados adicionada na Tabela de Ferramentas."
 
-#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3715
+#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3775
 #: appTools/ToolPaint.py:2693
 msgid "New tool added to Tool Table."
 msgstr "Nova ferramenta adicionada à Tabela de Ferramentas."
@@ -16455,7 +16462,7 @@ msgstr "Nova ferramenta adicionada à Tabela de Ferramentas."
 msgid "Gerber object for isolation routing."
 msgstr "Objeto Gerber para roteamento de isolação."
 
-#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3815
+#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3875
 msgid ""
 "Tools pool from which the algorithm\n"
 "will pick the ones used for copper clearing."
@@ -16479,7 +16486,7 @@ msgstr ""
 "resultante. Isso ocorre porque com algumas ferramentas esta função\n"
 "não será capaz de criar geometria de roteamento."
 
-#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3839
+#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3899
 msgid ""
 "Tool Diameter. It's value (in current FlatCAM units)\n"
 "is the cut width into the material."
@@ -16487,7 +16494,7 @@ msgstr ""
 "Diâmetro da ferramenta. É a largura do corte no material.\n"
 "(nas unidades atuais do FlatCAM)"
 
-#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3843
+#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3903
 msgid ""
 "The Tool Type (TT) can be:\n"
 "- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
@@ -16520,19 +16527,19 @@ msgstr ""
 "Escolhendo o tipo \"Forma em V\" automaticamente selecionará o Tipo de "
 "Operação Isolação."
 
-#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3923
+#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3983
 #, fuzzy
 #| msgid "Optimal Tool"
 msgid "Optimal"
 msgstr "Ferramenta Ideal"
 
-#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3927
+#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3987
 msgid ""
 "Find a tool diameter that is guaranteed\n"
 "to do a complete isolation."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:3967
+#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:4027
 #: appTools/ToolPaint.py:2929 appTools/ToolSolderPaste.py:1211
 msgid ""
 "Delete a selection of tools in the Tool Table\n"
@@ -16557,7 +16564,7 @@ msgstr ""
 msgid "Object whose area will be removed from isolation geometry."
 msgstr "Objeto cuja área será removida da geometria de isolação."
 
-#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4259
+#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4319
 msgid ""
 "The type of FlatCAM object to be used as non copper clearing reference.\n"
 "It can be Gerber, Excellon or Geometry."
@@ -16645,112 +16652,112 @@ msgstr "Nenhum objeto selecionado."
 msgid "Error when mouse left click."
 msgstr "Erro ao clicar no botão esquerdo do mouse."
 
-#: appTools/ToolNCC.py:835
+#: appTools/ToolNCC.py:837
 msgid "NCC Tool. Checking tools for validity."
 msgstr ""
 
-#: appTools/ToolNCC.py:947
+#: appTools/ToolNCC.py:949
 msgid ""
 "Incomplete isolation. None of the selected tools could do a complete "
 "isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:950
+#: appTools/ToolNCC.py:952
 msgid "At least one of the selected tools can do a complete isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:1722 appTools/ToolNCC.py:2646
+#: appTools/ToolNCC.py:1724 appTools/ToolNCC.py:2706
 msgid "NCC Tool. Preparing non-copper polygons."
 msgstr "Ferramenta NCC. Preparando polígonos."
 
-#: appTools/ToolNCC.py:1782 appTools/ToolNCC.py:2774
+#: appTools/ToolNCC.py:1784 appTools/ToolNCC.py:2834
 msgid "NCC Tool. Calculate 'empty' area."
 msgstr "Ferramenta NCC. Cálculo de áreas 'vazias'."
 
-#: appTools/ToolNCC.py:1793 appTools/ToolNCC.py:1822 appTools/ToolNCC.py:1928
-#: appTools/ToolNCC.py:1941 appTools/ToolNCC.py:2787 appTools/ToolNCC.py:2892
-#: appTools/ToolNCC.py:2907 appTools/ToolNCC.py:3173 appTools/ToolNCC.py:3274
-#: appTools/ToolNCC.py:3289
+#: appTools/ToolNCC.py:1795 appTools/ToolNCC.py:1824 appTools/ToolNCC.py:1930
+#: appTools/ToolNCC.py:1943 appTools/ToolNCC.py:2847 appTools/ToolNCC.py:2952
+#: appTools/ToolNCC.py:2967 appTools/ToolNCC.py:3233 appTools/ToolNCC.py:3334
+#: appTools/ToolNCC.py:3349
 msgid "Buffering finished"
 msgstr "Criar Buffer concluído"
 
-#: appTools/ToolNCC.py:1797 appTools/ToolNCC.py:1826 appTools/ToolNCC.py:1932
-#: appTools/ToolNCC.py:1944 appTools/ToolNCC.py:2795 appTools/ToolNCC.py:2914
-#: appTools/ToolNCC.py:3180 appTools/ToolNCC.py:3296
+#: appTools/ToolNCC.py:1799 appTools/ToolNCC.py:1828 appTools/ToolNCC.py:1934
+#: appTools/ToolNCC.py:1946 appTools/ToolNCC.py:2855 appTools/ToolNCC.py:2974
+#: appTools/ToolNCC.py:3240 appTools/ToolNCC.py:3356
 msgid "Could not get the extent of the area to be non copper cleared."
 msgstr "Não foi possível obter a extensão da área para retirada de cobre."
 
-#: appTools/ToolNCC.py:1805 appTools/ToolNCC.py:1955 appTools/ToolNCC.py:2925
+#: appTools/ToolNCC.py:1807 appTools/ToolNCC.py:1957 appTools/ToolNCC.py:2985
 msgid "NCC Tool. Finished calculation of 'empty' area."
 msgstr "Ferramenta NCC. Cálculo de área 'vazia' concluído."
 
-#: appTools/ToolNCC.py:1858 appTools/ToolNCC.py:2822 appTools/ToolNCC.py:2899
-#: appTools/ToolNCC.py:3200 appTools/ToolNCC.py:3281
+#: appTools/ToolNCC.py:1860 appTools/ToolNCC.py:2882 appTools/ToolNCC.py:2959
+#: appTools/ToolNCC.py:3260 appTools/ToolNCC.py:3341
 msgid ""
 "Isolation geometry is broken. Margin is less than isolation tool diameter."
 msgstr ""
 "A geometria de isolação está quebrada. A margem é menor que o diâmetro da "
 "ferramenta de isolação."
 
-#: appTools/ToolNCC.py:1948 appTools/ToolNCC.py:2918 appTools/ToolNCC.py:3299
+#: appTools/ToolNCC.py:1950 appTools/ToolNCC.py:2978 appTools/ToolNCC.py:3359
 msgid "The selected object is not suitable for copper clearing."
 msgstr "O objeto selecionado não é adequado para retirada de cobre."
 
-#: appTools/ToolNCC.py:1998
+#: appTools/ToolNCC.py:2000
 msgid "Clearing the polygon with the method: lines."
 msgstr "Limpando o polígono com o método: linhas."
 
-#: appTools/ToolNCC.py:2008
+#: appTools/ToolNCC.py:2010
 msgid "Failed. Clearing the polygon with the method: seed."
 msgstr "Falhou. Limpando o polígono com o método: semente."
 
-#: appTools/ToolNCC.py:2017
+#: appTools/ToolNCC.py:2019
 msgid "Failed. Clearing the polygon with the method: standard."
 msgstr "Falhou. Limpando  o polígono com o método: padrão."
 
-#: appTools/ToolNCC.py:2033
+#: appTools/ToolNCC.py:2035
 #, fuzzy
 #| msgid "Geometry could not be cleared completely"
 msgid "Polygon could not be cleared. Location:"
 msgstr "A geometria não pode ser limpa completamente"
 
-#: appTools/ToolNCC.py:2065 appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2595
-#: appTools/ToolNCC.py:2597
+#: appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2069 appTools/ToolNCC.py:2655
+#: appTools/ToolNCC.py:2657
 msgid "Non-Copper clearing ..."
 msgstr "Retirando cobre da área..."
 
-#: appTools/ToolNCC.py:2086
+#: appTools/ToolNCC.py:2088
 msgid ""
 "There is no copper clearing tool in the selection and at least one is needed."
 msgstr ""
 
-#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2742
+#: appTools/ToolNCC.py:2103 appTools/ToolNCC.py:2802
 msgid ""
 "NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
 msgstr ""
 "Ferramenta NCC. Polígonos concluídos. Tarefa de retirada de cobre iniciada."
 
-#: appTools/ToolNCC.py:2129 appTools/ToolNCC.py:2363
+#: appTools/ToolNCC.py:2131 appTools/ToolNCC.py:2365
 msgid "NCC Tool failed creating bounding box."
 msgstr "A Ferramenta NCC falhou ao criar a caixa delimitadora."
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "NCC Tool clearing with tool diameter"
 msgstr "NCC. Ferramenta com Diâmetro"
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "started."
 msgstr "iniciada."
 
-#: appTools/ToolNCC.py:2277
+#: appTools/ToolNCC.py:2279
 #, fuzzy
 #| msgid "Could not get the extent of the area to be non copper cleared."
 msgid "Could not use the tool for copper clear."
 msgstr "Não foi possível obter a extensão da área para retirada de cobre."
 
-#: appTools/ToolNCC.py:2299 appTools/ToolNCC.py:3099
+#: appTools/ToolNCC.py:2301 appTools/ToolNCC.py:3159
 msgid ""
 "There is no NCC Geometry in the file.\n"
 "Usually it means that the tool diameter is too big for the painted "
@@ -16762,31 +16769,31 @@ msgstr ""
 "geometria pintada.\n"
 "Altere os parâmetros de pintura e tente novamente."
 
-#: appTools/ToolNCC.py:2309 appTools/ToolNCC.py:3108
+#: appTools/ToolNCC.py:2311 appTools/ToolNCC.py:3168
 msgid "NCC Tool clear all done."
 msgstr "Retirada de cobre concluída."
 
-#: appTools/ToolNCC.py:2312 appTools/ToolNCC.py:3111
+#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:3171
 msgid "NCC Tool clear all done but the copper features isolation is broken for"
 msgstr "Retirada de cobre concluída, mas a isolação está quebrada por"
 
-#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:2510 appTools/ToolNCC.py:3113
-#: appTools/ToolNCC.py:3496
+#: appTools/ToolNCC.py:2316 appTools/ToolNCC.py:2570 appTools/ToolNCC.py:3173
+#: appTools/ToolNCC.py:3556
 msgid "tools"
 msgstr "ferramentas"
 
-#: appTools/ToolNCC.py:2341
+#: appTools/ToolNCC.py:2343
 #, fuzzy
 #| msgid "Paint Tool. Rest machining painting area task started."
 msgid "NCC Tool. Rest machining copper clearing task started."
 msgstr ""
 "Ferramenta de Pintura. Iniciada a pintura de área com usinagem de descanso."
 
-#: appTools/ToolNCC.py:2506 appTools/ToolNCC.py:3492
+#: appTools/ToolNCC.py:2566 appTools/ToolNCC.py:3552
 msgid "NCC Tool Rest Machining clear all done."
 msgstr "Retirada de cobre por usinagem de descanso concluída."
 
-#: appTools/ToolNCC.py:2509 appTools/ToolNCC.py:3495
+#: appTools/ToolNCC.py:2569 appTools/ToolNCC.py:3555
 msgid ""
 "NCC Tool Rest Machining clear all done but the copper features isolation is "
 "broken for"
@@ -16794,11 +16801,11 @@ msgstr ""
 "Retirada de cobre por usinagem de descanso concluída, mas a isolação está "
 "quebrada por"
 
-#: appTools/ToolNCC.py:2607
+#: appTools/ToolNCC.py:2667
 msgid "NCC Tool started. Reading parameters."
 msgstr "Ferramenta NCC iniciada. Lendo parâmetros."
 
-#: appTools/ToolNCC.py:3594
+#: appTools/ToolNCC.py:3654
 msgid ""
 "Try to use the Buffering Type = Full in Preferences -> Gerber General. "
 "Reload the Gerber file after this change."
@@ -16806,15 +16813,15 @@ msgstr ""
 "Tente usar o Tipo de Buffer = Completo em Preferências -> Gerber Geral."
 "Recarregue o arquivo Gerber após esta alteração."
 
-#: appTools/ToolNCC.py:3750
+#: appTools/ToolNCC.py:3810
 msgid "Non-Copper Clearing"
 msgstr "Área Sem Cobre (NCC)"
 
-#: appTools/ToolNCC.py:3779 appTools/ToolPaint.py:2765
+#: appTools/ToolNCC.py:3839 appTools/ToolPaint.py:2765
 msgid "Obj Type"
 msgstr "Tipo Obj"
 
-#: appTools/ToolNCC.py:3781
+#: appTools/ToolNCC.py:3841
 msgid ""
 "Specify the type of object to be cleared of excess copper.\n"
 "It can be of type: Gerber or Geometry.\n"
@@ -16826,11 +16833,11 @@ msgstr ""
 "O tipo selecionado aqui ditará o tipo\n"
 "de objetos da caixa de combinação 'Objeto'."
 
-#: appTools/ToolNCC.py:3803
+#: appTools/ToolNCC.py:3863
 msgid "Object to be cleared of excess copper."
 msgstr "Objeto a retirar o excesso de cobre."
 
-#: appTools/ToolNCC.py:3831
+#: appTools/ToolNCC.py:3891
 msgid ""
 "This is the Tool Number.\n"
 "Non copper clearing will start with the tool with the biggest \n"
@@ -17937,6 +17944,12 @@ msgstr "Limpar o texto."
 msgid "...processing..."
 msgstr "...processando..."
 
+#: appTools/ToolShell.py:293
+#, fuzzy
+#| msgid "FlatCAM Beta"
+msgid "FlatCAM Shell"
+msgstr "FlatCAM Beta"
+
 #: appTools/ToolSolderPaste.py:459
 msgid "Please enter a tool diameter to add, in Float format."
 msgstr "Insira um diâmetro de ferramenta para adicionar, no formato Flutuante."
@@ -18535,6 +18548,10 @@ msgstr ""
 "possível. \n"
 "Edite apenas uma geometria por vez."
 
+#: app_Main.py:2261
+msgid "EDITOR Area"
+msgstr ""
+
 #: app_Main.py:2263
 msgid "Editor is activated ..."
 msgstr "Editor está ativado ..."
diff --git a/locale/ro/LC_MESSAGES/strings.mo b/locale/ro/LC_MESSAGES/strings.mo
index 6d5e9aa6..9cdaf000 100644
Binary files a/locale/ro/LC_MESSAGES/strings.mo and b/locale/ro/LC_MESSAGES/strings.mo differ
diff --git a/locale/ro/LC_MESSAGES/strings.po b/locale/ro/LC_MESSAGES/strings.po
index 3d8f3f4d..cfdff052 100644
--- a/locale/ro/LC_MESSAGES/strings.po
+++ b/locale/ro/LC_MESSAGES/strings.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
-"POT-Creation-Date: 2020-10-22 15:08+0300\n"
-"PO-Revision-Date: 2020-10-22 15:08+0300\n"
+"POT-Creation-Date: 2020-10-22 22:02+0300\n"
+"PO-Revision-Date: 2020-10-22 22:02+0300\n"
 "Last-Translator: \n"
 "Language-Team: \n"
 "Language: ro\n"
@@ -109,7 +109,7 @@ msgstr "Bookmarks"
 #: appDatabase.py:2998 appDatabase.py:3044 appEditors/AppExcEditor.py:1023
 #: appEditors/AppExcEditor.py:1091 appEditors/AppTextEditor.py:263
 #: appGUI/MainGUI.py:2878 appGUI/MainGUI.py:3100 appGUI/MainGUI.py:3315
-#: appObjects/FlatCAMCNCJob.py:1745 appObjects/ObjectCollection.py:126
+#: appObjects/FlatCAMCNCJob.py:1750 appObjects/ObjectCollection.py:126
 #: appTools/ToolFilm.py:238 appTools/ToolFilm.py:384 appTools/ToolImage.py:112
 #: appTools/ToolMove.py:269 appTools/ToolPcbWizard.py:189
 #: appTools/ToolPcbWizard.py:212 appTools/ToolQRCode.py:526
@@ -125,8 +125,8 @@ msgid "Cancelled."
 msgstr "Anulat."
 
 #: Bookmark.py:308 appDatabase.py:673 appDatabase.py:3006
-#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1667
-#: appObjects/FlatCAMCNCJob.py:1857 appObjects/FlatCAMCNCJob.py:2306
+#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1672
+#: appObjects/FlatCAMCNCJob.py:1862 appObjects/FlatCAMCNCJob.py:2311
 #: appTools/ToolFilm.py:582 appTools/ToolFilm.py:830
 #: appTools/ToolSolderPaste.py:1097 app_Main.py:2666 app_Main.py:8451
 #: app_Main.py:8499 app_Main.py:8628 app_Main.py:8765 app_Main.py:8833
@@ -162,18 +162,18 @@ msgid "The user requested a graceful exit of the current task."
 msgstr "Utilizatorul a solicitat o inchidere grațioasă a taskului curent."
 
 #: appCommon/Common.py:292 appTools/ToolCopperThieving.py:328
-#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1364
+#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1366
 msgid "Click the start point of the area."
 msgstr "Faceți clic pe punctul de pornire al zonei."
 
-#: appCommon/Common.py:351 appTools/ToolNCC.py:1423 appTools/ToolPaint.py:1210
+#: appCommon/Common.py:351 appTools/ToolNCC.py:1425 appTools/ToolPaint.py:1210
 msgid "Click the end point of the area."
 msgstr "Faceți clic pe punctul final al zonei."
 
 #: appCommon/Common.py:357 appCommon/Common.py:459
 #: appTools/ToolCopperThieving.py:385 appTools/ToolIsolation.py:2348
-#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1429
-#: appTools/ToolNCC.py:1481 appTools/ToolPaint.py:1216
+#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1431
+#: appTools/ToolNCC.py:1483 appTools/ToolPaint.py:1216
 #: appTools/ToolPaint.py:1267
 msgid "Zone added. Click to start adding next zone or right click to finish."
 msgstr ""
@@ -181,7 +181,7 @@ msgstr ""
 "dreapta pentru a termina."
 
 #: appCommon/Common.py:404 appEditors/AppGeoEditor.py:2352
-#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1452
+#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1454
 #: appTools/ToolPaint.py:1238
 msgid "Click on next Point or click right mouse button to complete ..."
 msgstr ""
@@ -286,7 +286,7 @@ msgstr "Nume unealtă"
 #: appGUI/ObjectUI.py:1082 appGUI/ObjectUI.py:1650
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:130
 #: appTools/ToolCutOut.py:2060 appTools/ToolIsolation.py:3091
-#: appTools/ToolNCC.py:3906 appTools/ToolNCC.py:3917 appTools/ToolPaint.py:2882
+#: appTools/ToolNCC.py:3966 appTools/ToolNCC.py:3977 appTools/ToolPaint.py:2882
 msgid "Tool Dia"
 msgstr "Dia Unealtă"
 
@@ -707,13 +707,13 @@ msgstr ""
 #: appDatabase.py:307 appDatabase.py:684 appDatabase.py:718 appDatabase.py:2647
 #: appDatabase.py:3017 appDatabase.py:3051 appTools/ToolCutOut.py:294
 #: appTools/ToolDrilling.py:895 appTools/ToolIsolation.py:1067
-#: appTools/ToolNCC.py:1009 appTools/ToolPaint.py:704
+#: appTools/ToolNCC.py:1011 appTools/ToolPaint.py:704
 msgid "Could not load Tools DB file."
 msgstr "Nu s-a putut încărca fișierul DB Unelte."
 
 #: appDatabase.py:315 appDatabase.py:726 appDatabase.py:2655
 #: appDatabase.py:3059 appTools/ToolCutOut.py:305 appTools/ToolDrilling.py:903
-#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1020
+#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1022
 #: appTools/ToolPaint.py:715
 msgid "Failed to parse Tools DB file."
 msgstr "Eroare la analizarea fișierului DB Unelte."
@@ -772,7 +772,7 @@ msgstr "Importă DB Unelte"
 #: appDatabase.py:3464 appObjects/FlatCAMGeometry.py:1089
 #: appTools/ToolCutOut.py:484 appTools/ToolCutOut.py:525
 #: appTools/ToolIsolation.py:2583 appTools/ToolIsolation.py:2667
-#: appTools/ToolNCC.py:3655 appTools/ToolNCC.py:3735 appTools/ToolPaint.py:2626
+#: appTools/ToolNCC.py:3715 appTools/ToolNCC.py:3795 appTools/ToolPaint.py:2626
 #: appTools/ToolPaint.py:2715 app_Main.py:5676 app_Main.py:5718
 #: app_Main.py:5749 app_Main.py:5769 app_Main.py:5779
 msgid "Tools Database"
@@ -828,7 +828,7 @@ msgstr "Parametrii pt slot"
 
 #: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
 #: appGUI/ObjectUI.py:570 appGUI/ObjectUI.py:894 appGUI/ObjectUI.py:1876
-#: appGUI/ObjectUI.py:2681 appGUI/ObjectUI.py:2748
+#: appGUI/ObjectUI.py:2693 appGUI/ObjectUI.py:2760
 #: appTools/ToolCalibration.py:929 appTools/ToolFiducials.py:681
 msgid "Name"
 msgstr "Nume"
@@ -841,7 +841,7 @@ msgstr "Nume"
 #: appTools/ToolDrilling.py:2065 appTools/ToolIsolation.py:3022
 #: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
 #: appTools/ToolMilling.py:1360 appTools/ToolMilling.py:1670
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 #: appTools/ToolPcbWizard.py:404 appTools/ToolProperties.py:417
 #: appTools/ToolProperties.py:480 appTools/ToolSolderPaste.py:1166
 #: tclCommands/TclCommandDrillcncjob.py:195
@@ -880,7 +880,7 @@ msgstr ""
 
 #: appDatabase.py:1186 appDatabase.py:1504
 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46
-#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:3990
+#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:4050
 msgid "Operation"
 msgstr "Operațiuni"
 
@@ -907,7 +907,7 @@ msgstr "Găurire"
 
 #: appDatabase.py:1192 appDatabase.py:1514 appDatabase.py:2761
 #: appDatabase.py:3095 appTools/ToolIsolation.py:1101
-#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4000
+#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4060
 msgid "Isolation"
 msgstr "Tip de izolare"
 
@@ -918,7 +918,7 @@ msgid "Paint"
 msgstr "Pictează"
 
 #: appDatabase.py:1192 appDatabase.py:2773 appDatabase.py:3111
-#: appTools/ToolNCC.py:1044 appTools/ToolNCC.py:3648
+#: appTools/ToolNCC.py:1046 appTools/ToolNCC.py:3708
 #, fuzzy
 #| msgid "CCW"
 msgid "NCC"
@@ -937,7 +937,7 @@ msgstr "Decupare PCB"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:303
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:284
-#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4283
+#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4343
 #: appTools/ToolPaint.py:3163
 msgid "Shape"
 msgstr "Formă"
@@ -974,7 +974,7 @@ msgstr ""
 "Feedrate Z. Avans Z.\n"
 "Viteza de deplasare in planul Z."
 
-#: appDatabase.py:1506 appTools/ToolNCC.py:3992
+#: appDatabase.py:1506 appTools/ToolNCC.py:4052
 msgid ""
 "The 'Operation' can be:\n"
 "- Isolation -> will ensure that the non-copper clearing is always complete.\n"
@@ -988,7 +988,7 @@ msgstr ""
 "- Curățare -> curățarea obișnuită de cupru."
 
 #: appDatabase.py:1513 appEditors/AppGerberEditor.py:2749
-#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:3999
+#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:4059
 msgid "Clear"
 msgstr "Șterge"
 
@@ -998,7 +998,7 @@ msgstr "Șterge"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137
 #: appTools/ToolIsolation.py:3204 appTools/ToolMilling.py:1760
-#: appTools/ToolNCC.py:4008
+#: appTools/ToolNCC.py:4068
 msgid "Milling Type"
 msgstr "Tip Frezare"
 
@@ -1008,7 +1008,7 @@ msgstr "Tip Frezare"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147
 #: appTools/ToolIsolation.py:3206 appTools/ToolIsolation.py:3214
-#: appTools/ToolNCC.py:4010 appTools/ToolNCC.py:4018
+#: appTools/ToolNCC.py:4070 appTools/ToolNCC.py:4078
 msgid ""
 "Milling type when the selected tool is of type: 'iso_op':\n"
 "- climb / best for precision milling and to reduce tool usage\n"
@@ -1023,7 +1023,7 @@ msgstr ""
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144
-#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4015
+#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4075
 msgid "Climb"
 msgstr "Urcare"
 
@@ -1031,7 +1031,7 @@ msgstr "Urcare"
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:190
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145
-#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4016
+#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4076
 msgid "Conventional"
 msgstr "Convenţional"
 
@@ -1042,12 +1042,12 @@ msgstr "Convenţional"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:161
 #: appTools/ToolDrilling.py:2312 appTools/ToolIsolation.py:3189
-#: appTools/ToolNCC.py:4031 appTools/ToolPaint.py:2955
+#: appTools/ToolNCC.py:4091 appTools/ToolPaint.py:2955
 msgid "Overlap"
 msgstr "Rată suprapunere"
 
 #: appDatabase.py:1544 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
-#: appTools/ToolNCC.py:4033
+#: appTools/ToolNCC.py:4093
 msgid ""
 "How much (percentage) of the tool width to overlap each tool pass.\n"
 "Adjust the value starting with lower values\n"
@@ -1079,8 +1079,8 @@ msgstr ""
 #: appTools/ToolCopperThieving.py:1204 appTools/ToolCopperThieving.py:1455
 #: appTools/ToolCorners.py:411 appTools/ToolCutOut.py:2157
 #: appTools/ToolFiducials.py:786 appTools/ToolInvertGerber.py:234
-#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4075
-#: appTools/ToolNCC.py:4178
+#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4135
+#: appTools/ToolNCC.py:4238
 msgid "Margin"
 msgstr "Margine"
 
@@ -1091,25 +1091,25 @@ msgstr "Margine"
 #: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204
 #: appTools/ToolCopperThieving.py:1206 appTools/ToolCorners.py:413
-#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4077
-#: appTools/ToolNCC.py:4180
+#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4137
+#: appTools/ToolNCC.py:4240
 msgid "Bounding box margin."
 msgstr "Marginea pentru forma înconjurătoare."
 
 #: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
-#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2172
+#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2184
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
 #: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:196
-#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4052
+#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4112
 #: appTools/ToolPaint.py:2991 appTools/ToolPunchGerber.py:793
 msgid "Method"
 msgstr "Metodă"
 
 #: appDatabase.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
-#: appTools/ToolNCC.py:4054
+#: appTools/ToolNCC.py:4114
 msgid ""
 "Algorithm for copper clearing:\n"
 "- Standard: Fixed step inwards.\n"
@@ -1124,7 +1124,7 @@ msgstr ""
 #: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1963 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1456
+#: appTools/ToolNCC.py:1965 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1456
 #: appTools/ToolPaint.py:3016 defaults.py:346
 #: tclCommands/TclCommandCopperClear.py:126
 #: tclCommands/TclCommandCopperClear.py:134 tclCommands/TclCommandPaint.py:125
@@ -1135,7 +1135,7 @@ msgstr "Standard"
 #: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1974 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1470
+#: appTools/ToolNCC.py:1976 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1470
 #: appTools/ToolPaint.py:3016 defaults.py:469 defaults.py:507
 #: tclCommands/TclCommandCopperClear.py:128
 #: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
@@ -1146,7 +1146,7 @@ msgstr "Punct_arbitrar"
 #: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1702
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1985 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:160
+#: appTools/ToolNCC.py:1987 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:160
 #: appTools/ToolPaint.py:1484 appTools/ToolPaint.py:3016
 #: tclCommands/TclCommandCopperClear.py:130 tclCommands/TclCommandPaint.py:129
 msgid "Lines"
@@ -1155,24 +1155,24 @@ msgstr "Linii"
 #: appDatabase.py:1586 appDatabase.py:1701
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1996 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1649
+#: appTools/ToolNCC.py:1998 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1649
 #: appTools/ToolPaint.py:3016 tclCommands/TclCommandPaint.py:133
 msgid "Combo"
 msgstr "Combinat"
 
 #: appDatabase.py:1594 appDatabase.py:1712 appEditors/AppGeoEditor.py:505
-#: appGUI/ObjectUI.py:2257 appGUI/ObjectUI.py:2280
+#: appGUI/ObjectUI.py:2269 appGUI/ObjectUI.py:2292
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:222
-#: appObjects/FlatCAMCNCJob.py:1300 appObjects/FlatCAMCNCJob.py:1322
-#: appTools/ToolNCC.py:4088 appTools/ToolNCC.py:4191 appTools/ToolPaint.py:3027
+#: appObjects/FlatCAMCNCJob.py:1305 appObjects/FlatCAMCNCJob.py:1327
+#: appTools/ToolNCC.py:4148 appTools/ToolNCC.py:4251 appTools/ToolPaint.py:3027
 msgid "Connect"
 msgstr "Conectează"
 
 #: appDatabase.py:1598 appDatabase.py:1715 appEditors/AppGeoEditor.py:507
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
-#: appTools/ToolNCC.py:4092 appTools/ToolNCC.py:4193 appTools/ToolPaint.py:3030
+#: appTools/ToolNCC.py:4152 appTools/ToolNCC.py:4253 appTools/ToolPaint.py:3030
 msgid ""
 "Draw lines between resulting\n"
 "segments to minimize tool lifts."
@@ -1184,14 +1184,14 @@ msgstr ""
 #: appDatabase.py:1604 appDatabase.py:1719 appEditors/AppGeoEditor.py:515
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:230
-#: appTools/ToolNCC.py:4098 appTools/ToolNCC.py:4199 appTools/ToolPaint.py:3034
+#: appTools/ToolNCC.py:4158 appTools/ToolNCC.py:4259 appTools/ToolPaint.py:3034
 msgid "Contour"
 msgstr "Contur"
 
 #: appDatabase.py:1608 appDatabase.py:1722 appEditors/AppGeoEditor.py:517
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232
-#: appTools/ToolNCC.py:4102 appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3037
+#: appTools/ToolNCC.py:4162 appTools/ToolNCC.py:4261 appTools/ToolPaint.py:3037
 msgid ""
 "Cut around the perimeter of the polygon\n"
 "to trim rough edges."
@@ -1205,13 +1205,13 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
 #: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
-#: appTools/ToolNCC.py:4108 appTools/ToolNCC.py:4207 appTools/ToolPaint.py:2976
+#: appTools/ToolNCC.py:4168 appTools/ToolNCC.py:4267 appTools/ToolPaint.py:2976
 #: appTools/ToolPaint.py:3083 appTools/ToolTransform.py:517
 msgid "Offset"
 msgstr "Ofset"
 
 #: appDatabase.py:1618 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
-#: appTools/ToolNCC.py:4112 appTools/ToolNCC.py:4209
+#: appTools/ToolNCC.py:4172 appTools/ToolNCC.py:4269
 msgid ""
 "If used, it will add an offset to the copper features.\n"
 "The copper clearing will finish to a distance\n"
@@ -1709,7 +1709,7 @@ msgstr ""
 #: appTools/ToolInvertGerber.py:304 appTools/ToolInvertGerber.py:315
 #: appTools/ToolIsolation.py:3494 appTools/ToolIsolation.py:3505
 #: appTools/ToolMilling.py:2341 appTools/ToolMilling.py:2352
-#: appTools/ToolNCC.py:4448 appTools/ToolNCC.py:4459
+#: appTools/ToolNCC.py:4508 appTools/ToolNCC.py:4519
 #: appTools/ToolOptimal.py:614 appTools/ToolOptimal.py:625
 #: appTools/ToolPaint.py:3267 appTools/ToolPaint.py:3278
 #: appTools/ToolPanelize.py:914 appTools/ToolPanelize.py:925
@@ -1745,7 +1745,7 @@ msgstr "Valoarea editată este in afara limitelor"
 #: appTools/ToolInvertGerber.py:310 appTools/ToolInvertGerber.py:317
 #: appTools/ToolIsolation.py:3500 appTools/ToolIsolation.py:3507
 #: appTools/ToolMilling.py:2347 appTools/ToolMilling.py:2354
-#: appTools/ToolNCC.py:4454 appTools/ToolNCC.py:4461
+#: appTools/ToolNCC.py:4514 appTools/ToolNCC.py:4521
 #: appTools/ToolOptimal.py:620 appTools/ToolOptimal.py:627
 #: appTools/ToolPaint.py:3273 appTools/ToolPaint.py:3280
 #: appTools/ToolPanelize.py:920 appTools/ToolPanelize.py:927
@@ -1907,8 +1907,8 @@ msgstr "Nr. Tot. Sloturi"
 #: appEditors/AppExcEditor.py:2003 appObjects/FlatCAMGeometry.py:706
 #: appObjects/FlatCAMGeometry.py:1232 appObjects/FlatCAMGeometry.py:1974
 #: appObjects/FlatCAMGeometry.py:2633 appTools/ToolIsolation.py:1252
-#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1195
-#: appTools/ToolNCC.py:1332 appTools/ToolPaint.py:889
+#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1197
+#: appTools/ToolNCC.py:1334 appTools/ToolPaint.py:889
 #: appTools/ToolPaint.py:1027 appTools/ToolPaint.py:1740
 #: appTools/ToolSolderPaste.py:455 appTools/ToolSolderPaste.py:527
 msgid "Wrong value format entered, use a number."
@@ -1994,7 +1994,7 @@ msgstr "Nume:"
 
 #: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:620
 #: appGUI/ObjectUI.py:967 appTools/ToolIsolation.py:3010
-#: appTools/ToolNCC.py:3813 appTools/ToolPaint.py:2800
+#: appTools/ToolNCC.py:3873 appTools/ToolPaint.py:2800
 #: appTools/ToolSolderPaste.py:1155
 msgid "Tools Table"
 msgstr "Tabela Unelte"
@@ -2031,7 +2031,7 @@ msgstr ""
 
 #: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1084
 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
-#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3908
+#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3968
 msgid "Diameter for the new tool"
 msgstr "Diametru pentru noua unealtă (burghiu, freza)"
 
@@ -2409,7 +2409,7 @@ msgstr "Rotund"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:289
 #: appTools/ToolDrilling.py:2588 appTools/ToolExtractDrills.py:486
 #: appTools/ToolExtractDrills.py:619 appTools/ToolIsolation.py:3430
-#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4288
+#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4348
 #: appTools/ToolPaint.py:3168 appTools/ToolPunchGerber.py:759
 #: appTools/ToolPunchGerber.py:909 appTools/ToolQRCode.py:788
 msgid "Square"
@@ -2456,6 +2456,17 @@ msgstr "Unealta Text"
 msgid "Font"
 msgstr "Font"
 
+#: appEditors/AppGeoEditor.py:313 appEditors/AppGerberEditor.py:2495
+#: appEditors/AppGerberEditor.py:3968 appGUI/ObjectUI.py:316
+#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
+#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
+#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
+#: appTools/ToolFiducials.py:770
+msgid "Size"
+msgstr "Dimensiune"
+
 #: appEditors/AppGeoEditor.py:322 appGUI/MainGUI.py:1502
 msgid "Text"
 msgstr "Text"
@@ -2475,7 +2486,7 @@ msgstr "Unealta Text"
 #: appTools/ToolIsolation.py:697 appTools/ToolIsolation.py:3166
 #: appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
 #: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:329
-#: appTools/ToolNCC.py:2278 appTools/ToolNCC.py:3980 appTools/ToolPaint.py:304
+#: appTools/ToolNCC.py:2280 appTools/ToolNCC.py:4040 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:2940
 msgid "Tool"
 msgstr "Unealta"
@@ -2602,7 +2613,7 @@ msgstr "Originea"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:256
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
-#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4244
+#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4304
 #: appTools/ToolPaint.py:3097 appTools/ToolTransform.py:557 defaults.py:566
 msgid "Selection"
 msgstr "Selecţie"
@@ -2638,7 +2649,7 @@ msgid "A point of reference in format X,Y."
 msgstr "Un punct de referință în format X, Y."
 
 #: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
-#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2338
+#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2350
 #: appTools/ToolDblSided.py:706 appTools/ToolDblSided.py:892
 #: appTools/ToolNCC.py:63 appTools/ToolPaint.py:137
 #: appTools/ToolSolderPaste.py:160 appTools/ToolSolderPaste.py:1203
@@ -2942,7 +2953,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70
 #: appTools/ToolCalibration.py:881 appTools/ToolDrilling.py:2540
 #: appTools/ToolFilm.py:931 appTools/ToolMilling.py:2218
-#: appTools/ToolNCC.py:3802 appTools/ToolPaint.py:2788
+#: appTools/ToolNCC.py:3862 appTools/ToolPaint.py:2788
 #: appTools/ToolPanelize.py:697 appTools/ToolTransform.py:557
 msgid "Object"
 msgstr "Obiect"
@@ -3355,7 +3366,7 @@ msgstr "Linie"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290
 #: appTools/ToolDrilling.py:2589 appTools/ToolIsolation.py:3431
-#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4289
+#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4349
 #: appTools/ToolPaint.py:3169
 msgid "Polygon"
 msgstr "Poligon"
@@ -3390,7 +3401,7 @@ msgstr "Click pe punctul tinta."
 msgid "Editing MultiGeo Geometry, tool"
 msgstr "Se editează Geometrie tip MultiGeo. unealta"
 
-#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2280
+#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2282
 msgid "with diameter"
 msgstr "cu diametrul"
 
@@ -3619,17 +3630,6 @@ msgstr "Tabela de aperturi pt obiectul Gerber."
 msgid "Code"
 msgstr "Cod"
 
-#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:316
-#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
-#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
-#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
-#: appTools/ToolFiducials.py:770
-msgid "Size"
-msgstr "Dimensiune"
-
 #: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
 #: appGUI/ObjectUI.py:316
 msgid "Dim"
@@ -3736,7 +3736,7 @@ msgstr "Adaugă o nouă apertură in lista de aperturi."
 #: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1132
 #: appObjects/FlatCAMGeometry.py:560 appTools/ToolIsolation.py:70
 #: appTools/ToolIsolation.py:3150 appTools/ToolNCC.py:69
-#: appTools/ToolNCC.py:3964 appTools/ToolPaint.py:143
+#: appTools/ToolNCC.py:4024 appTools/ToolPaint.py:143
 #: appTools/ToolPaint.py:2926 appTools/ToolSolderPaste.py:163
 #: appTools/ToolSolderPaste.py:1209 app_Main.py:6123
 msgid "Delete"
@@ -4166,20 +4166,20 @@ msgid "Open file"
 msgstr "Deschide fişierul"
 
 #: appEditors/AppTextEditor.py:255 appEditors/AppTextEditor.py:260
-#: appObjects/FlatCAMCNCJob.py:1641 appObjects/FlatCAMCNCJob.py:1646
-#: appObjects/FlatCAMCNCJob.py:1831 appObjects/FlatCAMCNCJob.py:1836
-#: appObjects/FlatCAMCNCJob.py:1909 appObjects/FlatCAMCNCJob.py:1914
+#: appObjects/FlatCAMCNCJob.py:1646 appObjects/FlatCAMCNCJob.py:1651
+#: appObjects/FlatCAMCNCJob.py:1836 appObjects/FlatCAMCNCJob.py:1841
+#: appObjects/FlatCAMCNCJob.py:1914 appObjects/FlatCAMCNCJob.py:1919
 #: appTools/ToolSolderPaste.py:1063 app_Main.py:7038 app_Main.py:7043
 msgid "Export Code ..."
 msgstr "Exportă GCode ..."
 
-#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1663
-#: appObjects/FlatCAMCNCJob.py:1853 appObjects/FlatCAMCNCJob.py:2302
+#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1668
+#: appObjects/FlatCAMCNCJob.py:1858 appObjects/FlatCAMCNCJob.py:2307
 #: appTools/ToolSolderPaste.py:1093
 msgid "No such file or directory"
 msgstr "Nu exista un aşa fişier sau director"
 
-#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2316
+#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2321
 msgid "Saved to"
 msgstr "Salvat in"
 
@@ -4211,7 +4211,7 @@ msgstr "Salvează GCode"
 msgid "Start GCode"
 msgstr "Începând G-Code"
 
-#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2007
+#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2012
 #: appTools/ToolCalibration.py:447
 msgid "Loaded Machine Code into Code Editor"
 msgstr "S-a încărcat Codul Maşină în Editorul Cod"
@@ -4231,7 +4231,7 @@ msgstr "Dia"
 
 #: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:999
 #: appGUI/ObjectUI.py:2009 appTools/ToolIsolation.py:3022
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 msgid "TT"
 msgstr "TU"
 
@@ -5294,9 +5294,9 @@ msgstr "Micsorare"
 msgid "Zoom Fit"
 msgstr "Marire și ajustare"
 
-#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:2067
-msgid "&Command Line"
-msgstr "&Linie de comanda"
+#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:1154
+msgid "Command Line"
+msgstr "Linie de comanda"
 
 #: appGUI/MainGUI.py:924 appGUI/MainGUI.py:2079
 msgid "2Sided Tool"
@@ -5590,10 +5590,6 @@ msgstr "Comutați afișarea Axelor"
 msgid "Preferences"
 msgstr "Preferințe"
 
-#: appGUI/MainGUI.py:1154
-msgid "Command Line"
-msgstr "Linie de comanda"
-
 #: appGUI/MainGUI.py:1160
 msgid "HUD (Heads up display)"
 msgstr "HUD (Afisaj In Zona Superioara)"
@@ -5622,11 +5618,18 @@ msgstr ""
 "Măsurătoare absolută.\n"
 "Referința este originea (0, 0)"
 
+#: appGUI/MainGUI.py:1194
+#, fuzzy
+#| msgid "Show Shell"
+msgid "TCL Shell"
+msgstr "Arată Shell"
+
 #: appGUI/MainGUI.py:1221 appGUI/MainGUI.py:1470 app_Main.py:8143
 msgid "Project"
 msgstr "Proiect"
 
-#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272
+#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272 appGUI/MainGUI.py:3791
+#: appGUI/MainGUI.py:3797
 msgid "Plot Area"
 msgstr "Arie Afișare"
 
@@ -5719,7 +5722,7 @@ msgstr "Nu va salva modificările și va închide fereastra de preferințe."
 msgid "Toggle Visibility"
 msgstr "Comută Vizibilitate"
 
-#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2330
+#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2342
 msgid "New"
 msgstr "Nou"
 
@@ -5732,8 +5735,8 @@ msgstr "Nou"
 #: appTools/ToolDblSided.py:767 appTools/ToolFilm.py:929
 #: appTools/ToolFilm.py:952 appTools/ToolImage.py:136 appTools/ToolImage.py:191
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3338
-#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:803
-#: appTools/ToolNCC.py:3788 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:805
+#: appTools/ToolNCC.py:3848 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:587
@@ -5751,7 +5754,7 @@ msgstr "Geometrie"
 #: appTools/ToolDblSided.py:527 appTools/ToolDblSided.py:724
 #: appTools/ToolDblSided.py:766 appTools/ToolFilm.py:1207
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPunchGerber.py:803 appTools/ToolPunchGerber.py:818
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:586
@@ -5868,12 +5871,16 @@ msgstr "Da"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:148
 #: appTools/ToolDrilling.py:2090 appTools/ToolIsolation.py:3066
-#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3875
+#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3935
 #: appTools/ToolPaint.py:2851 appTranslation.py:113 appTranslation.py:215
 #: app_Main.py:2290 app_Main.py:3385 app_Main.py:5810 app_Main.py:6894
 msgid "No"
 msgstr "Nu"
 
+#: appGUI/MainGUI.py:2067
+msgid "&Command Line"
+msgstr "&Linie de comanda"
+
 #: appGUI/MainGUI.py:2086
 msgid "&Cutout Tool"
 msgstr "Unealta Decupare"
@@ -6612,7 +6619,7 @@ msgstr ""
 "Creați un obiect Geometrie cu\n"
 "căi de tăiere pentru tăierea imprejurul poligoanelor."
 
-#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4315
+#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4375
 msgid ""
 "Create the Geometry Object\n"
 "for non-copper routing."
@@ -6683,7 +6690,7 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:467 appGUI/ObjectUI.py:507 appTools/ToolCutOut.py:2287
 #: appTools/ToolCutOut.py:2302 appTools/ToolIsolation.py:3444
-#: appTools/ToolNCC.py:4312 appTools/ToolPaint.py:3178
+#: appTools/ToolNCC.py:4372 appTools/ToolPaint.py:3178
 msgid "Generate Geometry"
 msgstr "Genereza Geometrie"
 
@@ -7047,14 +7054,14 @@ msgstr ""
 "in exterior sau poate fi negativă pentru un ofset in interior."
 
 #: appGUI/ObjectUI.py:1079 appTools/ToolIsolation.py:3087
-#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3902 appTools/ToolPaint.py:140
+#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3962 appTools/ToolPaint.py:140
 #: appTools/ToolPaint.py:2878
 msgid "Add from DB"
 msgstr "Adaugă Unealtă din DB"
 
 #: appGUI/ObjectUI.py:1096 appTools/ToolCutOut.py:2071
 #: appTools/ToolIsolation.py:61 appTools/ToolIsolation.py:3122
-#: appTools/ToolNCC.py:3936 appTools/ToolPaint.py:2898
+#: appTools/ToolNCC.py:3996 appTools/ToolPaint.py:2898
 msgid "Search and Add"
 msgstr ""
 
@@ -7068,14 +7075,14 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1103 appTools/ToolCutOut.py:2083
 #: appTools/ToolIsolation.py:65 appTools/ToolIsolation.py:3133
-#: appTools/ToolNCC.py:3947 appTools/ToolPaint.py:2909
+#: appTools/ToolNCC.py:4007 appTools/ToolPaint.py:2909
 #, fuzzy
 #| msgid "Add from DB"
 msgid "Pick from DB"
 msgstr "Adaugă Unealtă din DB"
 
 #: appGUI/ObjectUI.py:1106 appTools/ToolCutOut.py:2086
-#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:3950
+#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:4010
 #: appTools/ToolPaint.py:2912
 #, fuzzy
 #| msgid ""
@@ -7122,8 +7129,8 @@ msgstr ""
 #: appTools/ToolMilling.py:779 appTools/ToolMilling.py:790
 #: appTools/ToolMilling.py:794 appTools/ToolMilling.py:1711
 #: appTools/ToolNCC.py:271 appTools/ToolNCC.py:276 appTools/ToolNCC.py:306
-#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
-#: appTools/ToolNCC.py:3980 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
+#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
+#: appTools/ToolNCC.py:4040 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
 #: appTools/ToolPaint.py:282 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:316 appTools/ToolPaint.py:655
 #: appTools/ToolPaint.py:2940
@@ -7132,7 +7139,7 @@ msgstr "Parametri pt"
 
 #: appGUI/ObjectUI.py:1175 appTools/ToolDrilling.py:2119
 #: appTools/ToolIsolation.py:3169 appTools/ToolMilling.py:1714
-#: appTools/ToolNCC.py:3983 appTools/ToolPaint.py:2943
+#: appTools/ToolNCC.py:4043 appTools/ToolPaint.py:2943
 msgid ""
 "The data used for creating GCode.\n"
 "Each tool store it's own set of such data."
@@ -7285,7 +7292,7 @@ msgstr ""
 msgid "Number of time units for spindle to dwell."
 msgstr "Timpul (ori secunde ori milisec) cat se stă in pauză."
 
-#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2128
+#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2140
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333
@@ -7293,7 +7300,7 @@ msgstr "Timpul (ori secunde ori milisec) cat se stă in pauză."
 msgid "Probe Z depth"
 msgstr "Z sonda"
 
-#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2130
+#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2142
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335
@@ -7312,7 +7319,7 @@ msgstr ""
 msgid "Feedrate Probe"
 msgstr "Feedrate sonda"
 
-#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2143
+#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2155
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348
@@ -7322,13 +7329,13 @@ msgstr "Viteza sondei când aceasta coboara."
 
 #: appGUI/ObjectUI.py:1434 appTools/ToolDrilling.py:2364
 #: appTools/ToolIsolation.py:3265 appTools/ToolMilling.py:2042
-#: appTools/ToolNCC.py:4141 appTools/ToolPaint.py:3049
+#: appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3049
 msgid "Apply parameters to all tools"
 msgstr "Aplicați parametrii la toate Uneltele"
 
 #: appGUI/ObjectUI.py:1437 appTools/ToolDrilling.py:2367
 #: appTools/ToolIsolation.py:3268 appTools/ToolMilling.py:2045
-#: appTools/ToolNCC.py:4144 appTools/ToolPaint.py:3052
+#: appTools/ToolNCC.py:4204 appTools/ToolPaint.py:3052
 msgid ""
 "The parameters in the current form will be applied\n"
 "on all the tools from the Tool Table."
@@ -7338,13 +7345,13 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1448 appTools/ToolDrilling.py:2378
 #: appTools/ToolIsolation.py:3279 appTools/ToolMilling.py:2056
-#: appTools/ToolNCC.py:4155 appTools/ToolPaint.py:3063
+#: appTools/ToolNCC.py:4215 appTools/ToolPaint.py:3063
 msgid "Common Parameters"
 msgstr "Parametrii Comuni"
 
 #: appGUI/ObjectUI.py:1450 appTools/ToolDrilling.py:2380
 #: appTools/ToolIsolation.py:3281 appTools/ToolMilling.py:2058
-#: appTools/ToolNCC.py:4157 appTools/ToolPaint.py:3065
+#: appTools/ToolNCC.py:4217 appTools/ToolPaint.py:3065
 msgid "Parameters that are common for all tools."
 msgstr "Parametrii care sunt comuni pentru toate uneltele."
 
@@ -7544,7 +7551,7 @@ msgstr "Adăugați o zonă de excludere."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286
 #: appTools/ToolDrilling.py:2591 appTools/ToolIsolation.py:3427
-#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4285
+#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4345
 #: appTools/ToolPaint.py:3165
 msgid "The kind of selection shape used for area selection."
 msgstr "Selectează forma de selectie folosita pentru selectia zonală."
@@ -7789,97 +7796,97 @@ msgstr ""
 msgid "Autolevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2052
+#: appGUI/ObjectUI.py:2053
 msgid "Enable the autolevelling feature."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2069
+#: appGUI/ObjectUI.py:2081
 #, fuzzy
 #| msgid "Tools Table"
 msgid "Probe Points Table"
 msgstr "Tabela Unelte"
 
-#: appGUI/ObjectUI.py:2070
+#: appGUI/ObjectUI.py:2082
 msgid "Generate GCode that will obtain the height map"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2072
+#: appGUI/ObjectUI.py:2084
 msgid "Show"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2073
+#: appGUI/ObjectUI.py:2085
 #, fuzzy
 #| msgid "Toggle the display of axis on canvas"
 msgid "Toggle the display of the Probe Points table."
 msgstr "Comutați afișarea Axelor"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 #, fuzzy
 #| msgid "Coordinates"
 msgid "X-Y Coordinates"
 msgstr "Coordinate"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 #, fuzzy
 #| msgid "Light"
 msgid "Height"
 msgstr "Luminos"
 
-#: appGUI/ObjectUI.py:2090
+#: appGUI/ObjectUI.py:2102
 #, fuzzy
 #| msgid "Plot Options"
 msgid "Plot probing points"
 msgstr "Opțiuni afișare"
 
-#: appGUI/ObjectUI.py:2092
+#: appGUI/ObjectUI.py:2104
 msgid ""
 "Plot the probing points in the table.\n"
 "If a Voronoi method is used then\n"
 "the Voronoi areas are also plotted."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2107
+#: appGUI/ObjectUI.py:2119
 #, fuzzy
 #| msgid "Finished G-Code generation"
 msgid "Probe GCode Generation"
 msgstr "Generarea G-Code terminată"
 
-#: appGUI/ObjectUI.py:2109
+#: appGUI/ObjectUI.py:2121
 msgid ""
 "Will create a GCode which will be sent to the controller,\n"
 "either through a file or directly, with the intent to get the height map\n"
 "that is to modify the original GCode to level the cutting height."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2116
+#: appGUI/ObjectUI.py:2128
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
 #, fuzzy
 #| msgid "Probe Z depth"
 msgid "Probe Z travel"
 msgstr "Z sonda"
 
-#: appGUI/ObjectUI.py:2118
+#: appGUI/ObjectUI.py:2130
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
 #, fuzzy
 #| msgid "Height (Z) for travelling between the points."
 msgid "The safe Z for probe travelling between probe points."
 msgstr "Înălțime (Z) pentru deplasarea între puncte."
 
-#: appGUI/ObjectUI.py:2141
+#: appGUI/ObjectUI.py:2153
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
 #, fuzzy
 #| msgid "Feedrate"
 msgid "Probe Feedrate"
 msgstr "Feedrate"
 
-#: appGUI/ObjectUI.py:2158
+#: appGUI/ObjectUI.py:2170
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
 #, fuzzy
 #| msgid "Mode:"
 msgid "Mode"
 msgstr "Mod:"
 
-#: appGUI/ObjectUI.py:2159
+#: appGUI/ObjectUI.py:2171
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
 msgid ""
 "Choose a mode for height map generation.\n"
@@ -7887,21 +7894,21 @@ msgid ""
 "- Grid: will automatically generate a grid of probe points"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2165
+#: appGUI/ObjectUI.py:2177
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
 #: appTools/ToolCutOut.py:2324 appTools/ToolFiducials.py:801
 msgid "Manual"
 msgstr "Manual"
 
-#: appGUI/ObjectUI.py:2166
+#: appGUI/ObjectUI.py:2178
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
 #, fuzzy
 #| msgid "Grids"
 msgid "Grid"
 msgstr "Grid-uri"
 
-#: appGUI/ObjectUI.py:2173
+#: appGUI/ObjectUI.py:2185
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
 msgid ""
 "Choose a method for approximation of heights from autolevelling data.\n"
@@ -7909,125 +7916,125 @@ msgid ""
 "- Bilinear: will use bilinear interpolation. Usable only for grid mode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2179
+#: appGUI/ObjectUI.py:2191
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
 msgid "Voronoi"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2180
+#: appGUI/ObjectUI.py:2192
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
 #, fuzzy
 #| msgid "Linear"
 msgid "Bilinear"
 msgstr "Liniar"
 
-#: appGUI/ObjectUI.py:2193
+#: appGUI/ObjectUI.py:2205
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
 #: appTools/ToolPanelize.py:787
 msgid "Columns"
 msgstr "Coloane"
 
-#: appGUI/ObjectUI.py:2195
+#: appGUI/ObjectUI.py:2207
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
 msgid "The number of grid columns."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2204
+#: appGUI/ObjectUI.py:2216
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
 #: appTools/ToolPanelize.py:797
 msgid "Rows"
 msgstr "Linii"
 
-#: appGUI/ObjectUI.py:2206
+#: appGUI/ObjectUI.py:2218
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
 msgid "The number of gird rows."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2211
+#: appGUI/ObjectUI.py:2223
 #, fuzzy
 #| msgid "Get Points"
 msgid "Add Probe Points"
 msgstr "Obține puncte"
 
-#: appGUI/ObjectUI.py:2219
+#: appGUI/ObjectUI.py:2231
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
 #, fuzzy
 #| msgid "Contour"
 msgid "Controller"
 msgstr "Contur"
 
-#: appGUI/ObjectUI.py:2221
+#: appGUI/ObjectUI.py:2233
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
 msgid ""
 "The kind of controller for which to generate\n"
 "height map gcode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2267 appGUI/ObjectUI.py:2282
-#: appObjects/FlatCAMCNCJob.py:1302 appObjects/FlatCAMCNCJob.py:1324
+#: appGUI/ObjectUI.py:2279 appGUI/ObjectUI.py:2294
+#: appObjects/FlatCAMCNCJob.py:1307 appObjects/FlatCAMCNCJob.py:1329
 #, fuzzy
 #| msgid "Contour"
 msgid "Control"
 msgstr "Contur"
 
-#: appGUI/ObjectUI.py:2277 appGUI/ObjectUI.py:2284
-#: appObjects/FlatCAMCNCJob.py:1304 appObjects/FlatCAMCNCJob.py:1326
+#: appGUI/ObjectUI.py:2289 appGUI/ObjectUI.py:2296
+#: appObjects/FlatCAMCNCJob.py:1309 appObjects/FlatCAMCNCJob.py:1331
 #, fuzzy
 #| msgid "Rendered"
 msgid "Sender"
 msgstr "Randat"
 
-#: appGUI/ObjectUI.py:2298
+#: appGUI/ObjectUI.py:2310
 msgid "COM list"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2300 appGUI/ObjectUI.py:2315
+#: appGUI/ObjectUI.py:2312 appGUI/ObjectUI.py:2327
 msgid "Lists the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2304
+#: appGUI/ObjectUI.py:2316
 msgid "Search"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2306
+#: appGUI/ObjectUI.py:2318
 msgid "Search for the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2313
+#: appGUI/ObjectUI.py:2325
 msgid "Baud rates"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2332
+#: appGUI/ObjectUI.py:2344
 msgid "New, custom baudrate."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2340
+#: appGUI/ObjectUI.py:2352
 msgid "Add the specified custom baudrate to the list."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2346
+#: appGUI/ObjectUI.py:2358
 #, fuzzy
 #| msgid "Delete Selected"
 msgid "Delete selected baudrate"
 msgstr "Șterge Obiectul Selectat"
 
-#: appGUI/ObjectUI.py:2350
+#: appGUI/ObjectUI.py:2362
 msgid "Reset"
 msgstr "Reset"
 
-#: appGUI/ObjectUI.py:2352
+#: appGUI/ObjectUI.py:2364
 msgid "Software reset of the controller."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2358 appObjects/FlatCAMCNCJob.py:1318
+#: appGUI/ObjectUI.py:2370 appObjects/FlatCAMCNCJob.py:1323
 #, fuzzy
 #| msgid "Connect"
 msgid "Disconnected"
 msgstr "Conectează"
 
-#: appGUI/ObjectUI.py:2360
+#: appGUI/ObjectUI.py:2372
 #, fuzzy
 #| msgid ""
 #| "Create a Gerber object from the selected object, within\n"
@@ -8037,131 +8044,131 @@ msgstr ""
 "Creează un obiect Gerber din obiectul selectat, in cadrul\n"
 "formei 'cutie' specificate."
 
-#: appGUI/ObjectUI.py:2385
+#: appGUI/ObjectUI.py:2397
 msgid "Jog"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2393
+#: appGUI/ObjectUI.py:2405
 #, fuzzy
 #| msgid "Zeros"
 msgid "Zero Axes"
 msgstr "Zero-uri"
 
-#: appGUI/ObjectUI.py:2426
+#: appGUI/ObjectUI.py:2438
 msgid "Pause/Resume"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2448
+#: appGUI/ObjectUI.py:2460
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
 msgid "Step"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2450
+#: appGUI/ObjectUI.py:2462
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
 msgid "Each jog action will move the axes with this value."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2462
+#: appGUI/ObjectUI.py:2474
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89
 #: appObjects/FlatCAMObj.py:831 appTools/ToolProperties.py:529
 msgid "Feedrate"
 msgstr "Feedrate"
 
-#: appGUI/ObjectUI.py:2464
+#: appGUI/ObjectUI.py:2476
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
 msgid "Feedrate when jogging."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2484
+#: appGUI/ObjectUI.py:2496
 msgid "Send Command"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2486 appGUI/ObjectUI.py:2496
+#: appGUI/ObjectUI.py:2498 appGUI/ObjectUI.py:2508
 msgid "Send a custom command to GRBL."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2491
+#: appGUI/ObjectUI.py:2503
 msgid "Type GRBL command ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2494
+#: appGUI/ObjectUI.py:2506
 msgid "Send"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2502
+#: appGUI/ObjectUI.py:2514
 #, fuzzy
 #| msgid "Text to PDF parameters"
 msgid "Get Config parameter"
 msgstr "Parametri text la PDF"
 
-#: appGUI/ObjectUI.py:2504
+#: appGUI/ObjectUI.py:2516
 msgid "A GRBL configuration parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2509
+#: appGUI/ObjectUI.py:2521
 msgid "Type GRBL parameter ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2512
+#: appGUI/ObjectUI.py:2524
 #, fuzzy
 #| msgid "Geo"
 msgid "Get"
 msgstr "Geo"
 
-#: appGUI/ObjectUI.py:2514
+#: appGUI/ObjectUI.py:2526
 msgid "Get the value of a specified GRBL parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2522
+#: appGUI/ObjectUI.py:2534
 #, fuzzy
 #| msgid "Gerber Export"
 msgid "Get Report"
 msgstr "Export Gerber"
 
-#: appGUI/ObjectUI.py:2524
+#: appGUI/ObjectUI.py:2536
 msgid "Print in shell the GRBL report."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2530
+#: appGUI/ObjectUI.py:2542
 msgid "Apply AutoLevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2532
+#: appGUI/ObjectUI.py:2544
 msgid ""
 "Will send the probing GCode to the GRBL controller,\n"
 "wait for the Z probing data and then apply this data\n"
 "over the original GCode therefore doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2541
+#: appGUI/ObjectUI.py:2553
 msgid "Will save the GRBL height map."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2551
+#: appGUI/ObjectUI.py:2563
 #, fuzzy
 #| msgid "Starting G-Code"
 msgid "Save Probing GCode"
 msgstr "Începând G-Code"
 
-#: appGUI/ObjectUI.py:2553
+#: appGUI/ObjectUI.py:2565
 #, fuzzy
 #| msgid "Starting G-Code"
 msgid "Will save the probing GCode."
 msgstr "Începând G-Code"
 
-#: appGUI/ObjectUI.py:2562
+#: appGUI/ObjectUI.py:2574
 msgid "View/Edit the probing GCode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2569 appObjects/FlatCAMCNCJob.py:1735
-#: appObjects/FlatCAMCNCJob.py:1739
+#: appGUI/ObjectUI.py:2581 appObjects/FlatCAMCNCJob.py:1740
+#: appObjects/FlatCAMCNCJob.py:1744
 #, fuzzy
 #| msgid "Import List"
 msgid "Import Height Map"
 msgstr "Importă lista"
 
-#: appGUI/ObjectUI.py:2571
+#: appGUI/ObjectUI.py:2583
 msgid ""
 "Import the file that has the Z heights\n"
 "obtained through probing and then apply this data\n"
@@ -8169,11 +8176,11 @@ msgid ""
 "doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2589
+#: appGUI/ObjectUI.py:2601
 msgid "Export CNC Code"
 msgstr "Exporta codul masina CNC"
 
-#: appGUI/ObjectUI.py:2591
+#: appGUI/ObjectUI.py:2603
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
 msgid ""
@@ -8183,11 +8190,11 @@ msgstr ""
 "Exportă și salvează codul G-Code intr-un fişier\n"
 "care este salvat pe HDD."
 
-#: appGUI/ObjectUI.py:2600
+#: appGUI/ObjectUI.py:2612
 msgid "Save CNC Code"
 msgstr "Salvează codul CNC"
 
-#: appGUI/ObjectUI.py:2603
+#: appGUI/ObjectUI.py:2615
 msgid ""
 "Opens dialog to save G-Code\n"
 "file."
@@ -8195,85 +8202,85 @@ msgstr ""
 "Deshide o fereastra dialog pentru salvarea codului\n"
 "G-Code intr-un fişier."
 
-#: appGUI/ObjectUI.py:2610
+#: appGUI/ObjectUI.py:2622
 #, fuzzy
 #| msgid "View CNC Code"
 msgid "Review CNC Code."
 msgstr "Vizualiz. codul CNC"
 
-#: appGUI/ObjectUI.py:2671
+#: appGUI/ObjectUI.py:2683
 msgid "Script Object"
 msgstr "Editare Script"
 
-#: appGUI/ObjectUI.py:2691 appGUI/ObjectUI.py:2765
+#: appGUI/ObjectUI.py:2703 appGUI/ObjectUI.py:2777
 msgid "Auto Completer"
 msgstr "Autocompletare"
 
-#: appGUI/ObjectUI.py:2693
+#: appGUI/ObjectUI.py:2705
 msgid "This selects if the auto completer is enabled in the Script Editor."
 msgstr ""
 "Aceasta selectează dacă completatorul automat este activat în Script Editor."
 
-#: appGUI/ObjectUI.py:2738
+#: appGUI/ObjectUI.py:2750
 msgid "Document Object"
 msgstr "Obiect document"
 
-#: appGUI/ObjectUI.py:2767
+#: appGUI/ObjectUI.py:2779
 msgid "This selects if the auto completer is enabled in the Document Editor."
 msgstr ""
 "Aceasta selectează dacă completatorul automat este activat în Editorul de "
 "documente."
 
-#: appGUI/ObjectUI.py:2785
+#: appGUI/ObjectUI.py:2797
 msgid "Font Type"
 msgstr "Tipul Font"
 
-#: appGUI/ObjectUI.py:2802
+#: appGUI/ObjectUI.py:2814
 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
 msgid "Font Size"
 msgstr "Dim. Font"
 
-#: appGUI/ObjectUI.py:2838
+#: appGUI/ObjectUI.py:2850
 msgid "Alignment"
 msgstr "Aliniere"
 
-#: appGUI/ObjectUI.py:2843
+#: appGUI/ObjectUI.py:2855
 msgid "Align Left"
 msgstr "Aliniați la stânga"
 
-#: appGUI/ObjectUI.py:2848 app_Main.py:4993
+#: appGUI/ObjectUI.py:2860 app_Main.py:4993
 msgid "Center"
 msgstr "Centru"
 
-#: appGUI/ObjectUI.py:2853
+#: appGUI/ObjectUI.py:2865
 msgid "Align Right"
 msgstr "Aliniați la dreapta"
 
-#: appGUI/ObjectUI.py:2858
+#: appGUI/ObjectUI.py:2870
 msgid "Justify"
 msgstr "Aliniere duala"
 
-#: appGUI/ObjectUI.py:2865
+#: appGUI/ObjectUI.py:2877
 msgid "Font Color"
 msgstr "Culoare FOnt"
 
-#: appGUI/ObjectUI.py:2867
+#: appGUI/ObjectUI.py:2879
 msgid "Set the font color for the selected text"
 msgstr "Setați culoarea fontului pentru textul selectat"
 
-#: appGUI/ObjectUI.py:2881
+#: appGUI/ObjectUI.py:2893
 msgid "Selection Color"
 msgstr "Culoare de selecție"
 
-#: appGUI/ObjectUI.py:2883
+#: appGUI/ObjectUI.py:2895
 msgid "Set the selection color when doing text selection."
 msgstr "Setați culoarea de selecție atunci când faceți selecția textului."
 
-#: appGUI/ObjectUI.py:2897
+#: appGUI/ObjectUI.py:2909
 msgid "Tab Size"
 msgstr "Dimens. filei"
 
-#: appGUI/ObjectUI.py:2899
+#: appGUI/ObjectUI.py:2911
 msgid "Set the tab size. In pixels. Default value is 80 pixels."
 msgstr ""
 "Setați dimensiunea filei. În pixeli. Valoarea implicită este de 80 pixeli."
@@ -10468,10 +10475,10 @@ msgstr "\"Urmareste\""
 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64
 #: appObjects/FlatCAMGerber.py:370 appTools/ToolCopperThieving.py:581
 #: appTools/ToolCopperThieving.py:770 appTools/ToolCopperThieving.py:782
-#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1791
-#: appTools/ToolNCC.py:1818 appTools/ToolNCC.py:1926 appTools/ToolNCC.py:1939
-#: appTools/ToolNCC.py:2785 appTools/ToolNCC.py:2890 appTools/ToolNCC.py:2905
-#: appTools/ToolNCC.py:3171 appTools/ToolNCC.py:3272 appTools/ToolNCC.py:3287
+#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1793
+#: appTools/ToolNCC.py:1820 appTools/ToolNCC.py:1928 appTools/ToolNCC.py:1941
+#: appTools/ToolNCC.py:2845 appTools/ToolNCC.py:2950 appTools/ToolNCC.py:2965
+#: appTools/ToolNCC.py:3231 appTools/ToolNCC.py:3332 appTools/ToolNCC.py:3347
 #: camlib.py:1113
 msgid "Buffering"
 msgstr "Buferare"
@@ -10802,9 +10809,9 @@ msgstr ""
 
 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
-#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1349
-#: appTools/ToolNCC.py:1665 appTools/ToolNCC.py:1729 appTools/ToolNCC.py:2649
-#: appTools/ToolNCC.py:2658 appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4376
+#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1351
+#: appTools/ToolNCC.py:1667 appTools/ToolNCC.py:1731 appTools/ToolNCC.py:2709
+#: appTools/ToolNCC.py:2718 appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4436
 #: defaults.py:475 tclCommands/TclCommandCopperClear.py:190
 msgid "Itself"
 msgstr "Însuşi"
@@ -10815,8 +10822,8 @@ msgstr "Însuşi"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1219 appTools/ToolIsolation.py:819
 #: appTools/ToolIsolation.py:1435 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1363 appTools/ToolNCC.py:1681 appTools/ToolNCC.py:1736
-#: appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4386 appTools/ToolPaint.py:1061
+#: appTools/ToolNCC.py:1365 appTools/ToolNCC.py:1683 appTools/ToolNCC.py:1738
+#: appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4446 appTools/ToolPaint.py:1061
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3249
 msgid "Area Selection"
 msgstr "Selecţie zonă"
@@ -10827,9 +10834,9 @@ msgstr "Selecţie zonă"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1220 appTools/ToolDblSided.py:757
 #: appTools/ToolIsolation.py:1475 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1382 appTools/ToolNCC.py:1687 appTools/ToolNCC.py:1744
-#: appTools/ToolNCC.py:2122 appTools/ToolNCC.py:2356 appTools/ToolNCC.py:2694
-#: appTools/ToolNCC.py:4240 appTools/ToolPaint.py:1080
+#: appTools/ToolNCC.py:1384 appTools/ToolNCC.py:1689 appTools/ToolNCC.py:1746
+#: appTools/ToolNCC.py:2124 appTools/ToolNCC.py:2358 appTools/ToolNCC.py:2754
+#: appTools/ToolNCC.py:4300 appTools/ToolPaint.py:1080
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3232
 #: tclCommands/TclCommandCopperClear.py:192 tclCommands/TclCommandPaint.py:166
 msgid "Reference Object"
@@ -12179,7 +12186,7 @@ msgstr "Crează un obiect tip Geometrie pentru frezarea găurilor."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:140
 #: appTools/ToolDrilling.py:2082 appTools/ToolIsolation.py:3058
-#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3867
+#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3927
 #: appTools/ToolPaint.py:2843
 msgid "Tool order"
 msgstr "Ordine unelte"
@@ -12190,8 +12197,8 @@ msgstr "Ordine unelte"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141
 #: appTools/ToolDrilling.py:2083 appTools/ToolIsolation.py:3059
-#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3868
-#: appTools/ToolNCC.py:3878 appTools/ToolPaint.py:2844
+#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3928
+#: appTools/ToolNCC.py:3938 appTools/ToolPaint.py:2844
 #: appTools/ToolPaint.py:2854
 msgid ""
 "This set the way that the tools in the tools table are used.\n"
@@ -12216,7 +12223,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:149
 #: appTools/ToolDrilling.py:2091 appTools/ToolIsolation.py:3067
-#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3876
+#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3936
 #: appTools/ToolPaint.py:2852
 msgid "Forward"
 msgstr "Înainte"
@@ -12226,7 +12233,7 @@ msgstr "Înainte"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150
 #: appTools/ToolDrilling.py:2092 appTools/ToolIsolation.py:3068
-#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3877
+#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3937
 #: appTools/ToolPaint.py:2853
 msgid "Reverse"
 msgstr "Înapoi"
@@ -12584,7 +12591,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:242
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243
-#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4162
+#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4222
 #: appTools/ToolPaint.py:3069
 msgid "Rest"
 msgstr "Resturi"
@@ -12636,13 +12643,13 @@ msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:350
-#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4298
+#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4358
 msgid "Check validity"
 msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:352
-#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4300
+#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4360
 msgid ""
 "If checked then the tools diameters are verified\n"
 "if they will provide a complete isolation."
@@ -12764,7 +12771,7 @@ msgstr ""
 "de traseele de cupru.\n"
 "Valoarea poate fi cuprinsă între 0 și 9999.9 unități FlatCAM."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4166
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4226
 msgid ""
 "If checked, use 'rest machining'.\n"
 "Basically it will clear copper outside PCB features,\n"
@@ -12782,7 +12789,7 @@ msgstr ""
 "final. Aceasta deaorece unele unelte nu vor putea genera geometrie.\n"
 "Daca nu este bifat, foloseşte algoritmul standard."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4246
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4306
 msgid ""
 "Selection of area to be processed.\n"
 "- 'Itself' - the processing extent is based on the object that is "
@@ -12923,7 +12930,7 @@ msgstr "Numărul de linii ale panel-ului dorit"
 #: appTools/ToolFilm.py:951 appTools/ToolImage.py:117 appTools/ToolImage.py:138
 #: appTools/ToolImage.py:191 appTools/ToolIsolation.py:802
 #: appTools/ToolIsolation.py:3339 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:3789 appTools/ToolNCC.py:4263
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:3849 appTools/ToolNCC.py:4323
 #: appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
 #: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167
 #: appTools/ToolPanelize.py:715 appTools/ToolPanelize.py:809
@@ -13448,33 +13455,33 @@ msgstr ""
 msgid "created/selected"
 msgstr "creat / selectat"
 
-#: appObjects/FlatCAMCNCJob.py:637 appObjects/FlatCAMDocument.py:71
+#: appObjects/FlatCAMCNCJob.py:642 appObjects/FlatCAMDocument.py:71
 #: appObjects/FlatCAMScript.py:82
 msgid "<span style=\"color:green;\"><b>Basic</b></span>"
 msgstr "<span style=\"color:green;\"><b>Baza</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:644 appObjects/FlatCAMDocument.py:75
+#: appObjects/FlatCAMCNCJob.py:649 appObjects/FlatCAMDocument.py:75
 #: appObjects/FlatCAMScript.py:86
 msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
 msgstr "<span style=\"color:red;\"><b>Avansat</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:780 appObjects/FlatCAMCNCJob.py:1058
+#: appObjects/FlatCAMCNCJob.py:785 appObjects/FlatCAMCNCJob.py:1063
 msgid ""
 "Voronoi function can not be loaded.\n"
 "Shapely >= 1.8 is required"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:808
+#: appObjects/FlatCAMCNCJob.py:813
 #, fuzzy
 #| msgid "Click on Start point ..."
 msgid "Click on canvas to add a Probe Point..."
 msgstr "Click pe punctul de Start ..."
 
-#: appObjects/FlatCAMCNCJob.py:1004
+#: appObjects/FlatCAMCNCJob.py:1009
 msgid "Point is not within the object area. Choose another point."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1024
+#: appObjects/FlatCAMCNCJob.py:1029
 #, fuzzy
 #| msgid ""
 #| "Zone added. Click to start adding next zone or right click to finish."
@@ -13485,139 +13492,139 @@ msgstr ""
 "Zona adăugată. Faceți clic stanga pt a continua adăugarea de zone sau click "
 "dreapta pentru a termina."
 
-#: appObjects/FlatCAMCNCJob.py:1046
+#: appObjects/FlatCAMCNCJob.py:1051
 #, fuzzy
 #| msgid "Finished G-Code processing..."
 msgid "Finished adding Probe Points..."
 msgstr "Prelucrarea G-Code terminată ..."
 
-#: appObjects/FlatCAMCNCJob.py:1260
+#: appObjects/FlatCAMCNCJob.py:1265
 #, fuzzy
 #| msgid "Click to place ..."
 msgid "COM list updated ..."
 msgstr "Click pt a plasa ..."
 
-#: appObjects/FlatCAMCNCJob.py:1296
+#: appObjects/FlatCAMCNCJob.py:1301
 #, fuzzy
 #| msgid "Connect"
 msgid "Connected"
 msgstr "Conectează"
 
-#: appObjects/FlatCAMCNCJob.py:1307
+#: appObjects/FlatCAMCNCJob.py:1312
 msgid "Port connected"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1311
+#: appObjects/FlatCAMCNCJob.py:1316
 msgid "Could not connect to GRBL on port"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1328
+#: appObjects/FlatCAMCNCJob.py:1333
 msgid "Port is connected. Disconnecting"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1330
+#: appObjects/FlatCAMCNCJob.py:1335
 #, fuzzy
 #| msgid "Could not retrieve box object"
 msgid "Could not connect to port"
 msgstr "Nu s-a putut incărca obiectul"
 
-#: appObjects/FlatCAMCNCJob.py:1360 appObjects/FlatCAMCNCJob.py:1790
+#: appObjects/FlatCAMCNCJob.py:1365 appObjects/FlatCAMCNCJob.py:1795
 #, fuzzy
 #| msgid "Opening G-Code."
 msgid "Sending GCode..."
 msgstr "G-Code in curs de incărcare."
 
-#: appObjects/FlatCAMCNCJob.py:1489
+#: appObjects/FlatCAMCNCJob.py:1494
 msgid "GRBL is doing a home cycle."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1495
+#: appObjects/FlatCAMCNCJob.py:1500
 msgid "GRBL software reset was sent."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1503
+#: appObjects/FlatCAMCNCJob.py:1508
 msgid "GRBL resumed."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1507
+#: appObjects/FlatCAMCNCJob.py:1512
 msgid "GRBL paused."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1649 appObjects/FlatCAMCNCJob.py:1839
-#: appObjects/FlatCAMCNCJob.py:1924 appTools/ToolSolderPaste.py:1066
+#: appObjects/FlatCAMCNCJob.py:1654 appObjects/FlatCAMCNCJob.py:1844
+#: appObjects/FlatCAMCNCJob.py:1929 appTools/ToolSolderPaste.py:1066
 msgid "Export cancelled ..."
 msgstr "Exportul anulat ..."
 
-#: appObjects/FlatCAMCNCJob.py:1673 appObjects/FlatCAMCNCJob.py:1960
+#: appObjects/FlatCAMCNCJob.py:1678 appObjects/FlatCAMCNCJob.py:1965
 #: appObjects/FlatCAMScript.py:134 app_Main.py:7824
 msgid "Loading..."
 msgstr "Se incarcă..."
 
-#: appObjects/FlatCAMCNCJob.py:1677
+#: appObjects/FlatCAMCNCJob.py:1682
 #, fuzzy
 #| msgid "There is no such parameter"
 msgid "There is nothing to view"
 msgstr "Nu exista un asemenea parametru"
 
-#: appObjects/FlatCAMCNCJob.py:1683
+#: appObjects/FlatCAMCNCJob.py:1688
 #, fuzzy
 #| msgid "Gcode Viewer"
 msgid "Code Viewer"
 msgstr "Gcode Viewer"
 
-#: appObjects/FlatCAMCNCJob.py:1721
+#: appObjects/FlatCAMCNCJob.py:1726
 #, fuzzy
 #| msgid "Loaded Machine Code into Code Editor"
 msgid "Loaded Machine Code into Code Viewer"
 msgstr "S-a încărcat Codul Maşină în Editorul Cod"
 
-#: appObjects/FlatCAMCNCJob.py:1766
+#: appObjects/FlatCAMCNCJob.py:1771
 #, fuzzy
 #| msgid "Failed to open config file"
 msgid "Failed to open height map file"
 msgstr "Eşec in incărcarea fişierului de configurare"
 
-#: appObjects/FlatCAMCNCJob.py:1816
+#: appObjects/FlatCAMCNCJob.py:1821
 msgid "Finished probing. Doing the autolevelling."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1821
+#: appObjects/FlatCAMCNCJob.py:1826
 msgid "Sending probing GCode to the GRBL controller."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1862
+#: appObjects/FlatCAMCNCJob.py:1867
 msgid "Empty GRBL heightmap."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1866
+#: appObjects/FlatCAMCNCJob.py:1871
 #, fuzzy
 #| msgid "Finished G-Code processing..."
 msgid "Finished autolevelling."
 msgstr "Prelucrarea G-Code terminată ..."
 
-#: appObjects/FlatCAMCNCJob.py:1880
+#: appObjects/FlatCAMCNCJob.py:1885
 msgid "Plotting..."
 msgstr "Se afișează..."
 
-#: appObjects/FlatCAMCNCJob.py:1950
+#: appObjects/FlatCAMCNCJob.py:1955
 msgid "File saved to"
 msgstr "Fișierul salvat în"
 
-#: appObjects/FlatCAMCNCJob.py:1974
+#: appObjects/FlatCAMCNCJob.py:1979
 #, fuzzy
 #| msgid "Gcode Viewer"
 msgid "Code Review"
 msgstr "Gcode Viewer"
 
-#: appObjects/FlatCAMCNCJob.py:2157
+#: appObjects/FlatCAMCNCJob.py:2162
 msgid "This CNCJob object can't be processed because it is a"
 msgstr "Acest obiect CNCJob nu poate fi procesat deoarece este un"
 
-#: appObjects/FlatCAMCNCJob.py:2159
+#: appObjects/FlatCAMCNCJob.py:2164
 msgid "CNCJob object"
 msgstr "Obiect CNCJob"
 
-#: appObjects/FlatCAMCNCJob.py:2269
+#: appObjects/FlatCAMCNCJob.py:2274
 msgid ""
 "G-code does not have a G94 code.\n"
 "Append Code snippet will not be used.."
@@ -13678,7 +13685,7 @@ msgstr "Finisare"
 #: appTools/ToolIsolation.py:531 appTools/ToolIsolation.py:644
 #: appTools/ToolIsolation.py:710 appTools/ToolMilling.py:628
 #: appTools/ToolMilling.py:749 appTools/ToolMilling.py:794
-#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
+#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
 #: appTools/ToolPaint.py:252 appTools/ToolPaint.py:316
 #: appTools/ToolPaint.py:655
 msgid "Multiple Tools"
@@ -13860,7 +13867,7 @@ msgstr "Operatia nu a putut fi executată."
 
 #: appObjects/FlatCAMGerber.py:558 appObjects/FlatCAMGerber.py:632
 #: appTools/ToolIsolation.py:1583 appTools/ToolIsolation.py:1951
-#: appTools/ToolNCC.py:1854 appTools/ToolNCC.py:2819 appTools/ToolNCC.py:3198
+#: appTools/ToolNCC.py:1856 appTools/ToolNCC.py:2879 appTools/ToolNCC.py:3258
 msgid "Isolation geometry could not be generated."
 msgstr "Geometria de izolare nu a fost posibil să fie generată."
 
@@ -14281,7 +14288,7 @@ msgstr ""
 #: appTools/ToolEtchCompensation.py:458 appTools/ToolExtractDrills.py:702
 #: appTools/ToolFiducials.py:932 appTools/ToolFilm.py:1383
 #: appTools/ToolInvertGerber.py:286 appTools/ToolIsolation.py:3477
-#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4328
+#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4388
 #: appTools/ToolOptimal.py:593 appTools/ToolPaint.py:3194
 #: appTools/ToolPanelize.py:889 appTools/ToolPunchGerber.py:993
 #: appTools/ToolQRCode.py:904 appTools/ToolRulesCheck.py:1618
@@ -14297,7 +14304,7 @@ msgstr "Resetați Unealta"
 #: appTools/ToolEtchCompensation.py:461 appTools/ToolExtractDrills.py:705
 #: appTools/ToolFiducials.py:935 appTools/ToolFilm.py:1386
 #: appTools/ToolInvertGerber.py:289 appTools/ToolIsolation.py:3480
-#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4331
+#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4391
 #: appTools/ToolOptimal.py:596 appTools/ToolPaint.py:3197
 #: appTools/ToolPanelize.py:892 appTools/ToolPunchGerber.py:996
 #: appTools/ToolQRCode.py:907 appTools/ToolRulesCheck.py:1621
@@ -14743,8 +14750,8 @@ msgstr "Unealta Copper Thieving efectuata."
 #: appTools/ToolIsolation.py:908 appTools/ToolIsolation.py:1345
 #: appTools/ToolIsolation.py:1372 appTools/ToolMilling.py:424
 #: appTools/ToolMilling.py:639 appTools/ToolMilling.py:1322
-#: appTools/ToolNCC.py:844 appTools/ToolNCC.py:1306 appTools/ToolNCC.py:1355
-#: appTools/ToolNCC.py:1388 appTools/ToolPaint.py:1086
+#: appTools/ToolNCC.py:846 appTools/ToolNCC.py:1308 appTools/ToolNCC.py:1357
+#: appTools/ToolNCC.py:1390 appTools/ToolPaint.py:1086
 #: appTools/ToolPanelize.py:191 appTools/ToolPanelize.py:205
 #: appTools/ToolSub.py:157 appTools/ToolSub.py:170 appTools/ToolSub.py:359
 #: appTools/ToolSub.py:372 tclCommands/TclCommandCopperClear.py:97
@@ -14775,7 +14782,7 @@ msgstr "Unealta Thieving Tool. Se pregătesc zonele de umplut cu cupru."
 
 #: appTools/ToolCopperThieving.py:599 appTools/ToolFilm.py:631
 #: appTools/ToolFilm.py:879 appTools/ToolIsolation.py:916
-#: appTools/ToolNCC.py:851 appTools/ToolOptimal.py:145
+#: appTools/ToolNCC.py:853 appTools/ToolOptimal.py:145
 #: appTools/ToolPanelize.py:612 appTools/ToolRulesCheck.py:626
 msgid "Working..."
 msgstr "Se lucrează..."
@@ -14784,13 +14791,13 @@ msgstr "Se lucrează..."
 msgid "Geometry not supported for bounding box"
 msgstr "Geometria nu este acceptată pentru caseta de delimitare"
 
-#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1679
-#: appTools/ToolNCC.py:1734 appTools/ToolNCC.py:2674 appTools/ToolPaint.py:2457
+#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1681
+#: appTools/ToolNCC.py:1736 appTools/ToolNCC.py:2734 appTools/ToolPaint.py:2457
 msgid "No object available."
 msgstr "Nici-un obiect disponibil."
 
-#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1704
-#: appTools/ToolNCC.py:1757 appTools/ToolNCC.py:2716
+#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1706
+#: appTools/ToolNCC.py:1759 appTools/ToolNCC.py:2776
 msgid "The reference object type is not supported."
 msgstr "Tipul de obiect de referintă nu este acceptat."
 
@@ -14848,7 +14855,7 @@ msgstr ""
 "alt obiect."
 
 #: appTools/ToolCopperThieving.py:1231 appTools/ToolIsolation.py:3385
-#: appTools/ToolNCC.py:4257 appTools/ToolPaint.py:3137
+#: appTools/ToolNCC.py:4317 appTools/ToolPaint.py:3137
 msgid "Ref. Type"
 msgstr "Tip Ref"
 
@@ -14862,12 +14869,12 @@ msgstr ""
 "Poate fi Gerber, Excellon sau Geometrie."
 
 #: appTools/ToolCopperThieving.py:1242 appTools/ToolIsolation.py:3396
-#: appTools/ToolNCC.py:4267 appTools/ToolPaint.py:3147
+#: appTools/ToolNCC.py:4327 appTools/ToolPaint.py:3147
 msgid "Ref. Object"
 msgstr "Obiect Ref"
 
 #: appTools/ToolCopperThieving.py:1244 appTools/ToolIsolation.py:3398
-#: appTools/ToolNCC.py:4269 appTools/ToolPaint.py:3149
+#: appTools/ToolNCC.py:4329 appTools/ToolPaint.py:3149
 msgid "The FlatCAM object to be used as non copper clearing reference."
 msgstr ""
 "Obiectul FlatCAM pentru a fi utilizat ca referință pt. curățarea de cupru."
@@ -15000,7 +15007,7 @@ msgstr "Va adăuga marcaje de colț în fișierul Gerber selectat."
 
 #: appTools/ToolCutOut.py:281 appTools/ToolIsolation.py:791
 #: appTools/ToolIsolation.py:1049 appTools/ToolIsolation.py:1185
-#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:990 appTools/ToolNCC.py:1128
+#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:992 appTools/ToolNCC.py:1130
 #: appTools/ToolPaint.py:395 appTools/ToolPaint.py:686
 #: appTools/ToolPaint.py:823 appTools/ToolSolderPaste.py:131
 #: appTools/ToolSolderPaste.py:464 app_Main.py:4490
@@ -15009,14 +15016,14 @@ msgstr ""
 "Introduceti un diametru al uneltei valid: valoare ne-nula in format Real."
 
 #: appTools/ToolCutOut.py:357 appTools/ToolIsolation.py:1130
-#: appTools/ToolNCC.py:1073 appTools/ToolPaint.py:767
+#: appTools/ToolNCC.py:1075 appTools/ToolPaint.py:767
 #, fuzzy
 #| msgid "Tools in Tools Database edited but not saved."
 msgid "Tool not in Tools Database. Adding a default tool."
 msgstr "Uneltele din Baza de date au fost editate dar nu au fost salvate."
 
 #: appTools/ToolCutOut.py:364 appTools/ToolDrilling.py:955
-#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1080
+#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1082
 #: appTools/ToolPaint.py:775
 msgid ""
 "Cancelled.\n"
@@ -15036,7 +15043,7 @@ msgid "Default tool added."
 msgstr "Val. Implicite"
 
 #: appTools/ToolCutOut.py:466 appTools/ToolIsolation.py:2577
-#: appTools/ToolNCC.py:3649 appTools/ToolPaint.py:2620
+#: appTools/ToolNCC.py:3709 appTools/ToolPaint.py:2620
 msgid "Selected tool can't be used here. Pick another."
 msgstr ""
 
@@ -15089,7 +15096,7 @@ msgstr "Operatia de decupaj cu formă liberă s-a terminat."
 #: appTools/ToolEtchCompensation.py:158 appTools/ToolInvertGerber.py:105
 #: appTools/ToolIsolation.py:912 appTools/ToolIsolation.py:1349
 #: appTools/ToolIsolation.py:1376 appTools/ToolMilling.py:1326
-#: appTools/ToolNCC.py:848 appTools/ToolNCC.py:1310 appTools/ToolPaint.py:1003
+#: appTools/ToolNCC.py:850 appTools/ToolNCC.py:1312 appTools/ToolPaint.py:1003
 #: appTools/ToolPanelize.py:196 tclCommands/TclCommandBbox.py:71
 #: tclCommands/TclCommandNregions.py:71
 msgid "Object not found"
@@ -15199,7 +15206,7 @@ msgstr ""
 "numit >Obiect<."
 
 #: appTools/ToolCutOut.py:2074 appTools/ToolIsolation.py:3125
-#: appTools/ToolNCC.py:3939 appTools/ToolPaint.py:2901
+#: appTools/ToolNCC.py:3999 appTools/ToolPaint.py:2901
 msgid ""
 "Add a new tool to the Tool Table\n"
 "with the diameter specified above.\n"
@@ -16457,7 +16464,7 @@ msgstr "O Noua Unealtă"
 msgid "Adding Tool cancelled"
 msgstr "Adăugarea unei unelte anulată"
 
-#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:879
+#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:881
 #: appTools/ToolOptimal.py:179
 msgid ""
 "The Gerber object has one Polygon as geometry.\n"
@@ -16466,7 +16473,7 @@ msgstr ""
 "Obiectul Gerber are un poligon ca geometrie.\n"
 "Nu există distanțe între elementele de geometrie care sa poata fi gasite."
 
-#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:924
+#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:926
 #, fuzzy
 #| msgid "tooldia = tool diameter"
 msgid "Optimal tool diameter found"
@@ -16474,7 +16481,7 @@ msgstr "tooldia = dimaetrul uneltei"
 
 #: appTools/ToolIsolation.py:1000 appTools/ToolIsolation.py:1508
 #: appTools/ToolIsolation.py:1710 appTools/ToolIsolation.py:1897
-#: appTools/ToolNCC.py:935 appTools/ToolNCC.py:1343 appTools/ToolPaint.py:1031
+#: appTools/ToolNCC.py:937 appTools/ToolNCC.py:1345 appTools/ToolPaint.py:1031
 #: appTools/ToolPaint.py:1744
 #, fuzzy
 #| msgid "Failed. No tool selected in the tool table ..."
@@ -16488,44 +16495,44 @@ msgstr ""
 
 #: appTools/ToolIsolation.py:1057 appTools/ToolIsolation.py:1144
 #: appTools/ToolIsolation.py:1206 appTools/ToolIsolation.py:2626
-#: appTools/ToolNCC.py:999 appTools/ToolNCC.py:1087 appTools/ToolNCC.py:1149
-#: appTools/ToolNCC.py:3698 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
+#: appTools/ToolNCC.py:1001 appTools/ToolNCC.py:1089 appTools/ToolNCC.py:1151
+#: appTools/ToolNCC.py:3758 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
 #: appTools/ToolPaint.py:844 appTools/ToolPaint.py:2676
 #: appTools/ToolSolderPaste.py:488
 msgid "Cancelled. Tool already in Tool Table."
 msgstr "Anulat. Unealta există deja in Tabela de Unelte."
 
-#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1115
+#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1117
 #: appTools/ToolPaint.py:810
 #, fuzzy
 #| msgid "New tool added to Tool Table."
 msgid "New tool added to Tool Table from Tools Database."
 msgstr "O noua unealtă a fost adăugată in Tabela de Unelte."
 
-#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1179
+#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1181
 #: appTools/ToolPaint.py:873
 #, fuzzy
 #| msgid "New tool added to Tool Table."
 msgid "Default tool added to Tool Table."
 msgstr "O noua unealtă a fost adăugată in Tabela de Unelte."
 
-#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1205
+#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1207
 #: appTools/ToolPaint.py:898
 msgid "Tool from Tool Table was edited."
 msgstr "O unealtă din Tabela de Unelte a fost editata."
 
-#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1218
+#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1220
 #: appTools/ToolPaint.py:911 appTools/ToolSolderPaste.py:548
 msgid "Cancelled. New diameter value is already in the Tool Table."
 msgstr ""
 "Anulat. Noua valoare pt diametrul uneltei este deja in Tabela de Unelte."
 
-#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1269
+#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1271
 #: appTools/ToolPaint.py:961
 msgid "Delete failed. Select a tool to delete."
 msgstr "Ștergere eșuată. Selectează o unealtă pt ștergere."
 
-#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1275
+#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1277
 #: appTools/ToolPaint.py:967
 msgid "Tool(s) deleted from Tool Table."
 msgstr "Au fost șterse unelte din Tabela de Unelte."
@@ -16619,12 +16626,12 @@ msgstr "Niciun poligon în selecție."
 msgid "Click the end point of the paint area."
 msgstr "Faceți clic pe punctul final al zonei de pictat."
 
-#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3662
+#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3722
 #: appTools/ToolPaint.py:2633 app_Main.py:5773 app_Main.py:5783
 msgid "Tool from DB added in Tool Table."
 msgstr "Unealtă din Baza de date adăugată in Tabela de Unelte."
 
-#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3715
+#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3775
 #: appTools/ToolPaint.py:2693
 msgid "New tool added to Tool Table."
 msgstr "O noua unealtă a fost adăugată in Tabela de Unelte."
@@ -16633,7 +16640,7 @@ msgstr "O noua unealtă a fost adăugată in Tabela de Unelte."
 msgid "Gerber object for isolation routing."
 msgstr "Obiect Gerber pentru rutare de izolare."
 
-#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3815
+#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3875
 msgid ""
 "Tools pool from which the algorithm\n"
 "will pick the ones used for copper clearing."
@@ -16658,7 +16665,7 @@ msgstr ""
 "obiectul\n"
 "final. Aceasta deaorece unele unelte nu vor putea genera geometrie de rutare."
 
-#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3839
+#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3899
 msgid ""
 "Tool Diameter. It's value (in current FlatCAM units)\n"
 "is the cut width into the material."
@@ -16666,7 +16673,7 @@ msgstr ""
 "Diametrul uneltei. Valoarea să (in unitati curente FlatCAM)\n"
 "reprezintă lăţimea tăieturii in material."
 
-#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3843
+#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3903
 msgid ""
 "The Tool Type (TT) can be:\n"
 "- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
@@ -16699,19 +16706,19 @@ msgstr ""
 "operare\n"
 "în geometria rezultată ca fiind Izolare."
 
-#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3923
+#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3983
 #, fuzzy
 #| msgid "Optimal Tool"
 msgid "Optimal"
 msgstr "Unealta Optim"
 
-#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3927
+#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3987
 msgid ""
 "Find a tool diameter that is guaranteed\n"
 "to do a complete isolation."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:3967
+#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:4027
 #: appTools/ToolPaint.py:2929 appTools/ToolSolderPaste.py:1211
 msgid ""
 "Delete a selection of tools in the Tool Table\n"
@@ -16738,7 +16745,7 @@ msgid "Object whose area will be removed from isolation geometry."
 msgstr ""
 "Obiectul a cărui suprafată va fi indepărtată din geometria tip Izolare."
 
-#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4259
+#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4319
 msgid ""
 "The type of FlatCAM object to be used as non copper clearing reference.\n"
 "It can be Gerber, Excellon or Geometry."
@@ -16824,115 +16831,115 @@ msgstr "Nici-un obiect nu este selectat."
 msgid "Error when mouse left click."
 msgstr "Eroare atunci când faceți clic pe butonul stânga al mouse-ului."
 
-#: appTools/ToolNCC.py:835
+#: appTools/ToolNCC.py:837
 msgid "NCC Tool. Checking tools for validity."
 msgstr ""
 
-#: appTools/ToolNCC.py:947
+#: appTools/ToolNCC.py:949
 msgid ""
 "Incomplete isolation. None of the selected tools could do a complete "
 "isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:950
+#: appTools/ToolNCC.py:952
 msgid "At least one of the selected tools can do a complete isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:1722 appTools/ToolNCC.py:2646
+#: appTools/ToolNCC.py:1724 appTools/ToolNCC.py:2706
 msgid "NCC Tool. Preparing non-copper polygons."
 msgstr "Unealta NCC. Se pregătesc poligoanele non-cupru."
 
-#: appTools/ToolNCC.py:1782 appTools/ToolNCC.py:2774
+#: appTools/ToolNCC.py:1784 appTools/ToolNCC.py:2834
 msgid "NCC Tool. Calculate 'empty' area."
 msgstr "Unealta NCC. Calculează aria 'goală'."
 
-#: appTools/ToolNCC.py:1793 appTools/ToolNCC.py:1822 appTools/ToolNCC.py:1928
-#: appTools/ToolNCC.py:1941 appTools/ToolNCC.py:2787 appTools/ToolNCC.py:2892
-#: appTools/ToolNCC.py:2907 appTools/ToolNCC.py:3173 appTools/ToolNCC.py:3274
-#: appTools/ToolNCC.py:3289
+#: appTools/ToolNCC.py:1795 appTools/ToolNCC.py:1824 appTools/ToolNCC.py:1930
+#: appTools/ToolNCC.py:1943 appTools/ToolNCC.py:2847 appTools/ToolNCC.py:2952
+#: appTools/ToolNCC.py:2967 appTools/ToolNCC.py:3233 appTools/ToolNCC.py:3334
+#: appTools/ToolNCC.py:3349
 msgid "Buffering finished"
 msgstr "Buferarea terminată"
 
-#: appTools/ToolNCC.py:1797 appTools/ToolNCC.py:1826 appTools/ToolNCC.py:1932
-#: appTools/ToolNCC.py:1944 appTools/ToolNCC.py:2795 appTools/ToolNCC.py:2914
-#: appTools/ToolNCC.py:3180 appTools/ToolNCC.py:3296
+#: appTools/ToolNCC.py:1799 appTools/ToolNCC.py:1828 appTools/ToolNCC.py:1934
+#: appTools/ToolNCC.py:1946 appTools/ToolNCC.py:2855 appTools/ToolNCC.py:2974
+#: appTools/ToolNCC.py:3240 appTools/ToolNCC.py:3356
 msgid "Could not get the extent of the area to be non copper cleared."
 msgstr ""
 "Nu s-a putut obtine intinderea suprafaței care să fie curățată de cupru."
 
-#: appTools/ToolNCC.py:1805 appTools/ToolNCC.py:1955 appTools/ToolNCC.py:2925
+#: appTools/ToolNCC.py:1807 appTools/ToolNCC.py:1957 appTools/ToolNCC.py:2985
 msgid "NCC Tool. Finished calculation of 'empty' area."
 msgstr "Unealta NCC. S-a terminat calculul suprafetei 'goale'."
 
-#: appTools/ToolNCC.py:1858 appTools/ToolNCC.py:2822 appTools/ToolNCC.py:2899
-#: appTools/ToolNCC.py:3200 appTools/ToolNCC.py:3281
+#: appTools/ToolNCC.py:1860 appTools/ToolNCC.py:2882 appTools/ToolNCC.py:2959
+#: appTools/ToolNCC.py:3260 appTools/ToolNCC.py:3341
 msgid ""
 "Isolation geometry is broken. Margin is less than isolation tool diameter."
 msgstr ""
 "Geometria de Izolare este discontinuă.\n"
 "Marginea este mai mic decat diametrul uneltei de izolare."
 
-#: appTools/ToolNCC.py:1948 appTools/ToolNCC.py:2918 appTools/ToolNCC.py:3299
+#: appTools/ToolNCC.py:1950 appTools/ToolNCC.py:2978 appTools/ToolNCC.py:3359
 msgid "The selected object is not suitable for copper clearing."
 msgstr "Obiectul selectat nu este potrivit pentru curățarea cuprului."
 
-#: appTools/ToolNCC.py:1998
+#: appTools/ToolNCC.py:2000
 msgid "Clearing the polygon with the method: lines."
 msgstr "Curatarea poligonului cu metoda: linii."
 
-#: appTools/ToolNCC.py:2008
+#: appTools/ToolNCC.py:2010
 msgid "Failed. Clearing the polygon with the method: seed."
 msgstr "A eșuat. Se sterge poligonul cu metoda: punct sursa."
 
-#: appTools/ToolNCC.py:2017
+#: appTools/ToolNCC.py:2019
 msgid "Failed. Clearing the polygon with the method: standard."
 msgstr "A eșuat. Se curate poligonul cu metoda: standard."
 
-#: appTools/ToolNCC.py:2033
+#: appTools/ToolNCC.py:2035
 #, fuzzy
 #| msgid "Geometry could not be cleared completely"
 msgid "Polygon could not be cleared. Location:"
 msgstr "Geometria nu a putut fi stearsă complet"
 
-#: appTools/ToolNCC.py:2065 appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2595
-#: appTools/ToolNCC.py:2597
+#: appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2069 appTools/ToolNCC.py:2655
+#: appTools/ToolNCC.py:2657
 msgid "Non-Copper clearing ..."
 msgstr "Curățare Non-Cupru ..."
 
-#: appTools/ToolNCC.py:2086
+#: appTools/ToolNCC.py:2088
 msgid ""
 "There is no copper clearing tool in the selection and at least one is needed."
 msgstr ""
 
-#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2742
+#: appTools/ToolNCC.py:2103 appTools/ToolNCC.py:2802
 msgid ""
 "NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
 msgstr ""
 "Unelata NCC. S-a terminat pregătirea poligoanelor non-cupru. Taskul de "
 "curatare normal de cupru a inceput."
 
-#: appTools/ToolNCC.py:2129 appTools/ToolNCC.py:2363
+#: appTools/ToolNCC.py:2131 appTools/ToolNCC.py:2365
 msgid "NCC Tool failed creating bounding box."
 msgstr "Unealta NCC a esuat in a crea forma inconjurătoare."
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "NCC Tool clearing with tool diameter"
 msgstr "Unealta NCC cu diametrul uneltei"
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "started."
 msgstr "a inceput."
 
-#: appTools/ToolNCC.py:2277
+#: appTools/ToolNCC.py:2279
 #, fuzzy
 #| msgid "Could not get the extent of the area to be non copper cleared."
 msgid "Could not use the tool for copper clear."
 msgstr ""
 "Nu s-a putut obtine intinderea suprafaței care să fie curățată de cupru."
 
-#: appTools/ToolNCC.py:2299 appTools/ToolNCC.py:3099
+#: appTools/ToolNCC.py:2301 appTools/ToolNCC.py:3159
 msgid ""
 "There is no NCC Geometry in the file.\n"
 "Usually it means that the tool diameter is too big for the painted "
@@ -16944,21 +16951,21 @@ msgstr ""
 "pictată.\n"
 "Schimbați parametrii Paint și încercați din nou."
 
-#: appTools/ToolNCC.py:2309 appTools/ToolNCC.py:3108
+#: appTools/ToolNCC.py:2311 appTools/ToolNCC.py:3168
 msgid "NCC Tool clear all done."
 msgstr "Unealta NCC curătare toate efectuată."
 
-#: appTools/ToolNCC.py:2312 appTools/ToolNCC.py:3111
+#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:3171
 msgid "NCC Tool clear all done but the copper features isolation is broken for"
 msgstr ""
 "Unealta NCC curătare toate efectuată dar izolatia este intreruptă pentru"
 
-#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:2510 appTools/ToolNCC.py:3113
-#: appTools/ToolNCC.py:3496
+#: appTools/ToolNCC.py:2316 appTools/ToolNCC.py:2570 appTools/ToolNCC.py:3173
+#: appTools/ToolNCC.py:3556
 msgid "tools"
 msgstr "unelte"
 
-#: appTools/ToolNCC.py:2341
+#: appTools/ToolNCC.py:2343
 #, fuzzy
 #| msgid "Paint Tool. Rest machining painting area task started."
 msgid "NCC Tool. Rest machining copper clearing task started."
@@ -16966,11 +16973,11 @@ msgstr ""
 "Unealta Paint. Taskul de pictare a unei arii cu strategia de masinare 'rest' "
 "a inceput."
 
-#: appTools/ToolNCC.py:2506 appTools/ToolNCC.py:3492
+#: appTools/ToolNCC.py:2566 appTools/ToolNCC.py:3552
 msgid "NCC Tool Rest Machining clear all done."
 msgstr "Unealta NCC curătare cu prelucrare tip 'rest' efectuată."
 
-#: appTools/ToolNCC.py:2509 appTools/ToolNCC.py:3495
+#: appTools/ToolNCC.py:2569 appTools/ToolNCC.py:3555
 msgid ""
 "NCC Tool Rest Machining clear all done but the copper features isolation is "
 "broken for"
@@ -16978,11 +16985,11 @@ msgstr ""
 "Unealta NCC curătare toate cu prelucrare tip 'rest' efectuată dar izolatia "
 "este intreruptă pentru"
 
-#: appTools/ToolNCC.py:2607
+#: appTools/ToolNCC.py:2667
 msgid "NCC Tool started. Reading parameters."
 msgstr "Unealta NCC a pornit. Se citesc parametrii."
 
-#: appTools/ToolNCC.py:3594
+#: appTools/ToolNCC.py:3654
 msgid ""
 "Try to use the Buffering Type = Full in Preferences -> Gerber General. "
 "Reload the Gerber file after this change."
@@ -16990,15 +16997,15 @@ msgstr ""
 "Incearcă să folosesti optiunea Tipul de buffering = Complet in Preferinte -> "
 "Gerber General. Reincarcă fisierul Gerber după această schimbare."
 
-#: appTools/ToolNCC.py:3750
+#: appTools/ToolNCC.py:3810
 msgid "Non-Copper Clearing"
 msgstr "Curățăre Non-Cu"
 
-#: appTools/ToolNCC.py:3779 appTools/ToolPaint.py:2765
+#: appTools/ToolNCC.py:3839 appTools/ToolPaint.py:2765
 msgid "Obj Type"
 msgstr "Tip obiect"
 
-#: appTools/ToolNCC.py:3781
+#: appTools/ToolNCC.py:3841
 msgid ""
 "Specify the type of object to be cleared of excess copper.\n"
 "It can be of type: Gerber or Geometry.\n"
@@ -17010,11 +17017,11 @@ msgstr ""
 "Ceea ce este selectat aici va dicta genul\n"
 "de obiecte care vor popula combobox-ul „Obiect”."
 
-#: appTools/ToolNCC.py:3803
+#: appTools/ToolNCC.py:3863
 msgid "Object to be cleared of excess copper."
 msgstr "Obiect care trebuie curatat de excesul de cupru."
 
-#: appTools/ToolNCC.py:3831
+#: appTools/ToolNCC.py:3891
 msgid ""
 "This is the Tool Number.\n"
 "Non copper clearing will start with the tool with the biggest \n"
@@ -18143,6 +18150,12 @@ msgstr "Ștergeți textul."
 msgid "...processing..."
 msgstr "...in procesare..."
 
+#: appTools/ToolShell.py:293
+#, fuzzy
+#| msgid "FlatCAM Beta"
+msgid "FlatCAM Shell"
+msgstr "FlatCAM Beta"
+
 #: appTools/ToolSolderPaste.py:459
 msgid "Please enter a tool diameter to add, in Float format."
 msgstr "Introduce diametrul unei unelte pt a fi adăugată, in format Real."
@@ -18749,6 +18762,10 @@ msgstr ""
 "MultiGeo nu este posibilă.\n"
 "Se poate edita numai o singură geometrie de fiecare dată."
 
+#: app_Main.py:2261
+msgid "EDITOR Area"
+msgstr ""
+
 #: app_Main.py:2263
 msgid "Editor is activated ..."
 msgstr "Editorul este activ ..."
diff --git a/locale/ru/LC_MESSAGES/strings.po b/locale/ru/LC_MESSAGES/strings.po
index 4a970366..42778286 100644
--- a/locale/ru/LC_MESSAGES/strings.po
+++ b/locale/ru/LC_MESSAGES/strings.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
-"POT-Creation-Date: 2020-10-22 15:08+0300\n"
+"POT-Creation-Date: 2020-10-22 22:03+0300\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Andrey Kultyapov <camellan@yandex.ru>\n"
 "Language-Team: \n"
@@ -106,7 +106,7 @@ msgstr "Закладки"
 #: appDatabase.py:2998 appDatabase.py:3044 appEditors/AppExcEditor.py:1023
 #: appEditors/AppExcEditor.py:1091 appEditors/AppTextEditor.py:263
 #: appGUI/MainGUI.py:2878 appGUI/MainGUI.py:3100 appGUI/MainGUI.py:3315
-#: appObjects/FlatCAMCNCJob.py:1745 appObjects/ObjectCollection.py:126
+#: appObjects/FlatCAMCNCJob.py:1750 appObjects/ObjectCollection.py:126
 #: appTools/ToolFilm.py:238 appTools/ToolFilm.py:384 appTools/ToolImage.py:112
 #: appTools/ToolMove.py:269 appTools/ToolPcbWizard.py:189
 #: appTools/ToolPcbWizard.py:212 appTools/ToolQRCode.py:526
@@ -122,8 +122,8 @@ msgid "Cancelled."
 msgstr "Отменено."
 
 #: Bookmark.py:308 appDatabase.py:673 appDatabase.py:3006
-#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1667
-#: appObjects/FlatCAMCNCJob.py:1857 appObjects/FlatCAMCNCJob.py:2306
+#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1672
+#: appObjects/FlatCAMCNCJob.py:1862 appObjects/FlatCAMCNCJob.py:2311
 #: appTools/ToolFilm.py:582 appTools/ToolFilm.py:830
 #: appTools/ToolSolderPaste.py:1097 app_Main.py:2666 app_Main.py:8451
 #: app_Main.py:8499 app_Main.py:8628 app_Main.py:8765 app_Main.py:8833
@@ -159,24 +159,24 @@ msgid "The user requested a graceful exit of the current task."
 msgstr "Пользователь запросил выход из текущего задания."
 
 #: appCommon/Common.py:292 appTools/ToolCopperThieving.py:328
-#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1364
+#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1366
 msgid "Click the start point of the area."
 msgstr "Нажмите на начальную точку области."
 
-#: appCommon/Common.py:351 appTools/ToolNCC.py:1423 appTools/ToolPaint.py:1210
+#: appCommon/Common.py:351 appTools/ToolNCC.py:1425 appTools/ToolPaint.py:1210
 msgid "Click the end point of the area."
 msgstr "Нажмите на конечную точку области."
 
 #: appCommon/Common.py:357 appCommon/Common.py:459
 #: appTools/ToolCopperThieving.py:385 appTools/ToolIsolation.py:2348
-#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1429
-#: appTools/ToolNCC.py:1481 appTools/ToolPaint.py:1216
+#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1431
+#: appTools/ToolNCC.py:1483 appTools/ToolPaint.py:1216
 #: appTools/ToolPaint.py:1267
 msgid "Zone added. Click to start adding next zone or right click to finish."
 msgstr "Зона добавлена. Щелкните правой кнопкой мыши для завершения."
 
 #: appCommon/Common.py:404 appEditors/AppGeoEditor.py:2352
-#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1452
+#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1454
 #: appTools/ToolPaint.py:1238
 msgid "Click on next Point or click right mouse button to complete ..."
 msgstr ""
@@ -284,7 +284,7 @@ msgstr "Название инструмента"
 #: appGUI/ObjectUI.py:1082 appGUI/ObjectUI.py:1650
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:130
 #: appTools/ToolCutOut.py:2060 appTools/ToolIsolation.py:3091
-#: appTools/ToolNCC.py:3906 appTools/ToolNCC.py:3917 appTools/ToolPaint.py:2882
+#: appTools/ToolNCC.py:3966 appTools/ToolNCC.py:3977 appTools/ToolPaint.py:2882
 msgid "Tool Dia"
 msgstr "Диаметр инструмента"
 
@@ -708,13 +708,13 @@ msgstr ""
 #: appDatabase.py:307 appDatabase.py:684 appDatabase.py:718 appDatabase.py:2647
 #: appDatabase.py:3017 appDatabase.py:3051 appTools/ToolCutOut.py:294
 #: appTools/ToolDrilling.py:895 appTools/ToolIsolation.py:1067
-#: appTools/ToolNCC.py:1009 appTools/ToolPaint.py:704
+#: appTools/ToolNCC.py:1011 appTools/ToolPaint.py:704
 msgid "Could not load Tools DB file."
 msgstr "Не удалось загрузить файл БД."
 
 #: appDatabase.py:315 appDatabase.py:726 appDatabase.py:2655
 #: appDatabase.py:3059 appTools/ToolCutOut.py:305 appTools/ToolDrilling.py:903
-#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1020
+#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1022
 #: appTools/ToolPaint.py:715
 msgid "Failed to parse Tools DB file."
 msgstr "Не удалось прочитать файл БД."
@@ -773,7 +773,7 @@ msgstr "Импорт FlatCAM БД"
 #: appDatabase.py:3464 appObjects/FlatCAMGeometry.py:1089
 #: appTools/ToolCutOut.py:484 appTools/ToolCutOut.py:525
 #: appTools/ToolIsolation.py:2583 appTools/ToolIsolation.py:2667
-#: appTools/ToolNCC.py:3655 appTools/ToolNCC.py:3735 appTools/ToolPaint.py:2626
+#: appTools/ToolNCC.py:3715 appTools/ToolNCC.py:3795 appTools/ToolPaint.py:2626
 #: appTools/ToolPaint.py:2715 app_Main.py:5676 app_Main.py:5718
 #: app_Main.py:5749 app_Main.py:5769 app_Main.py:5779
 msgid "Tools Database"
@@ -829,7 +829,7 @@ msgstr "Параметры слота"
 
 #: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
 #: appGUI/ObjectUI.py:570 appGUI/ObjectUI.py:894 appGUI/ObjectUI.py:1876
-#: appGUI/ObjectUI.py:2681 appGUI/ObjectUI.py:2748
+#: appGUI/ObjectUI.py:2693 appGUI/ObjectUI.py:2760
 #: appTools/ToolCalibration.py:929 appTools/ToolFiducials.py:681
 msgid "Name"
 msgstr "Имя"
@@ -842,7 +842,7 @@ msgstr "Имя"
 #: appTools/ToolDrilling.py:2065 appTools/ToolIsolation.py:3022
 #: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
 #: appTools/ToolMilling.py:1360 appTools/ToolMilling.py:1670
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 #: appTools/ToolPcbWizard.py:404 appTools/ToolProperties.py:417
 #: appTools/ToolProperties.py:480 appTools/ToolSolderPaste.py:1166
 #: tclCommands/TclCommandDrillcncjob.py:195
@@ -881,7 +881,7 @@ msgstr ""
 
 #: appDatabase.py:1186 appDatabase.py:1504
 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46
-#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:3990
+#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:4050
 msgid "Operation"
 msgstr "Операция"
 
@@ -908,7 +908,7 @@ msgstr "Сверление"
 
 #: appDatabase.py:1192 appDatabase.py:1514 appDatabase.py:2761
 #: appDatabase.py:3095 appTools/ToolIsolation.py:1101
-#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4000
+#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4060
 msgid "Isolation"
 msgstr "Изоляция"
 
@@ -919,7 +919,7 @@ msgid "Paint"
 msgstr "Нарисовать"
 
 #: appDatabase.py:1192 appDatabase.py:2773 appDatabase.py:3111
-#: appTools/ToolNCC.py:1044 appTools/ToolNCC.py:3648
+#: appTools/ToolNCC.py:1046 appTools/ToolNCC.py:3708
 #, fuzzy
 #| msgid "CCW"
 msgid "NCC"
@@ -938,7 +938,7 @@ msgstr "Обрезка платы"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:303
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:284
-#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4283
+#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4343
 #: appTools/ToolPaint.py:3163
 msgid "Shape"
 msgstr "Форма"
@@ -975,7 +975,7 @@ msgstr ""
 "Скорость подачи Z\n"
 "Скорость в плоскости Z."
 
-#: appDatabase.py:1506 appTools/ToolNCC.py:3992
+#: appDatabase.py:1506 appTools/ToolNCC.py:4052
 msgid ""
 "The 'Operation' can be:\n"
 "- Isolation -> will ensure that the non-copper clearing is always complete.\n"
@@ -988,7 +988,7 @@ msgstr ""
 "- Очистка - > обычная очистка от меди."
 
 #: appDatabase.py:1513 appEditors/AppGerberEditor.py:2749
-#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:3999
+#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:4059
 msgid "Clear"
 msgstr "Сбросить"
 
@@ -998,7 +998,7 @@ msgstr "Сбросить"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137
 #: appTools/ToolIsolation.py:3204 appTools/ToolMilling.py:1760
-#: appTools/ToolNCC.py:4008
+#: appTools/ToolNCC.py:4068
 msgid "Milling Type"
 msgstr "Тип фрезерования"
 
@@ -1008,7 +1008,7 @@ msgstr "Тип фрезерования"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147
 #: appTools/ToolIsolation.py:3206 appTools/ToolIsolation.py:3214
-#: appTools/ToolNCC.py:4010 appTools/ToolNCC.py:4018
+#: appTools/ToolNCC.py:4070 appTools/ToolNCC.py:4078
 msgid ""
 "Milling type when the selected tool is of type: 'iso_op':\n"
 "- climb / best for precision milling and to reduce tool usage\n"
@@ -1023,7 +1023,7 @@ msgstr ""
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144
-#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4015
+#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4075
 msgid "Climb"
 msgstr "Постепенный"
 
@@ -1031,7 +1031,7 @@ msgstr "Постепенный"
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:190
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145
-#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4016
+#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4076
 msgid "Conventional"
 msgstr "Обычный"
 
@@ -1042,12 +1042,12 @@ msgstr "Обычный"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:161
 #: appTools/ToolDrilling.py:2312 appTools/ToolIsolation.py:3189
-#: appTools/ToolNCC.py:4031 appTools/ToolPaint.py:2955
+#: appTools/ToolNCC.py:4091 appTools/ToolPaint.py:2955
 msgid "Overlap"
 msgstr "Перекрытие"
 
 #: appDatabase.py:1544 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
-#: appTools/ToolNCC.py:4033
+#: appTools/ToolNCC.py:4093
 msgid ""
 "How much (percentage) of the tool width to overlap each tool pass.\n"
 "Adjust the value starting with lower values\n"
@@ -1080,8 +1080,8 @@ msgstr ""
 #: appTools/ToolCopperThieving.py:1204 appTools/ToolCopperThieving.py:1455
 #: appTools/ToolCorners.py:411 appTools/ToolCutOut.py:2157
 #: appTools/ToolFiducials.py:786 appTools/ToolInvertGerber.py:234
-#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4075
-#: appTools/ToolNCC.py:4178
+#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4135
+#: appTools/ToolNCC.py:4238
 msgid "Margin"
 msgstr "Отступ"
 
@@ -1092,25 +1092,25 @@ msgstr "Отступ"
 #: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204
 #: appTools/ToolCopperThieving.py:1206 appTools/ToolCorners.py:413
-#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4077
-#: appTools/ToolNCC.py:4180
+#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4137
+#: appTools/ToolNCC.py:4240
 msgid "Bounding box margin."
 msgstr "Граница рамки."
 
 #: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
-#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2172
+#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2184
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
 #: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:196
-#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4052
+#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4112
 #: appTools/ToolPaint.py:2991 appTools/ToolPunchGerber.py:793
 msgid "Method"
 msgstr "Метод"
 
 #: appDatabase.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
-#: appTools/ToolNCC.py:4054
+#: appTools/ToolNCC.py:4114
 msgid ""
 "Algorithm for copper clearing:\n"
 "- Standard: Fixed step inwards.\n"
@@ -1125,7 +1125,7 @@ msgstr ""
 #: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1963 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1456
+#: appTools/ToolNCC.py:1965 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1456
 #: appTools/ToolPaint.py:3016 defaults.py:346
 #: tclCommands/TclCommandCopperClear.py:126
 #: tclCommands/TclCommandCopperClear.py:134 tclCommands/TclCommandPaint.py:125
@@ -1136,7 +1136,7 @@ msgstr "Стандартный"
 #: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1974 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1470
+#: appTools/ToolNCC.py:1976 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1470
 #: appTools/ToolPaint.py:3016 defaults.py:469 defaults.py:507
 #: tclCommands/TclCommandCopperClear.py:128
 #: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
@@ -1147,7 +1147,7 @@ msgstr "По кругу"
 #: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1702
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1985 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:160
+#: appTools/ToolNCC.py:1987 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:160
 #: appTools/ToolPaint.py:1484 appTools/ToolPaint.py:3016
 #: tclCommands/TclCommandCopperClear.py:130 tclCommands/TclCommandPaint.py:129
 msgid "Lines"
@@ -1156,24 +1156,24 @@ msgstr "Линий"
 #: appDatabase.py:1586 appDatabase.py:1701
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1996 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1649
+#: appTools/ToolNCC.py:1998 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1649
 #: appTools/ToolPaint.py:3016 tclCommands/TclCommandPaint.py:133
 msgid "Combo"
 msgstr "Комбо"
 
 #: appDatabase.py:1594 appDatabase.py:1712 appEditors/AppGeoEditor.py:505
-#: appGUI/ObjectUI.py:2257 appGUI/ObjectUI.py:2280
+#: appGUI/ObjectUI.py:2269 appGUI/ObjectUI.py:2292
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:222
-#: appObjects/FlatCAMCNCJob.py:1300 appObjects/FlatCAMCNCJob.py:1322
-#: appTools/ToolNCC.py:4088 appTools/ToolNCC.py:4191 appTools/ToolPaint.py:3027
+#: appObjects/FlatCAMCNCJob.py:1305 appObjects/FlatCAMCNCJob.py:1327
+#: appTools/ToolNCC.py:4148 appTools/ToolNCC.py:4251 appTools/ToolPaint.py:3027
 msgid "Connect"
 msgstr "Подключение"
 
 #: appDatabase.py:1598 appDatabase.py:1715 appEditors/AppGeoEditor.py:507
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
-#: appTools/ToolNCC.py:4092 appTools/ToolNCC.py:4193 appTools/ToolPaint.py:3030
+#: appTools/ToolNCC.py:4152 appTools/ToolNCC.py:4253 appTools/ToolPaint.py:3030
 msgid ""
 "Draw lines between resulting\n"
 "segments to minimize tool lifts."
@@ -1184,14 +1184,14 @@ msgstr ""
 #: appDatabase.py:1604 appDatabase.py:1719 appEditors/AppGeoEditor.py:515
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:230
-#: appTools/ToolNCC.py:4098 appTools/ToolNCC.py:4199 appTools/ToolPaint.py:3034
+#: appTools/ToolNCC.py:4158 appTools/ToolNCC.py:4259 appTools/ToolPaint.py:3034
 msgid "Contour"
 msgstr "Контур"
 
 #: appDatabase.py:1608 appDatabase.py:1722 appEditors/AppGeoEditor.py:517
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232
-#: appTools/ToolNCC.py:4102 appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3037
+#: appTools/ToolNCC.py:4162 appTools/ToolNCC.py:4261 appTools/ToolPaint.py:3037
 msgid ""
 "Cut around the perimeter of the polygon\n"
 "to trim rough edges."
@@ -1205,13 +1205,13 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
 #: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
-#: appTools/ToolNCC.py:4108 appTools/ToolNCC.py:4207 appTools/ToolPaint.py:2976
+#: appTools/ToolNCC.py:4168 appTools/ToolNCC.py:4267 appTools/ToolPaint.py:2976
 #: appTools/ToolPaint.py:3083 appTools/ToolTransform.py:517
 msgid "Offset"
 msgstr "Смещение"
 
 #: appDatabase.py:1618 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
-#: appTools/ToolNCC.py:4112 appTools/ToolNCC.py:4209
+#: appTools/ToolNCC.py:4172 appTools/ToolNCC.py:4269
 msgid ""
 "If used, it will add an offset to the copper features.\n"
 "The copper clearing will finish to a distance\n"
@@ -1702,7 +1702,7 @@ msgstr ""
 #: appTools/ToolInvertGerber.py:304 appTools/ToolInvertGerber.py:315
 #: appTools/ToolIsolation.py:3494 appTools/ToolIsolation.py:3505
 #: appTools/ToolMilling.py:2341 appTools/ToolMilling.py:2352
-#: appTools/ToolNCC.py:4448 appTools/ToolNCC.py:4459
+#: appTools/ToolNCC.py:4508 appTools/ToolNCC.py:4519
 #: appTools/ToolOptimal.py:614 appTools/ToolOptimal.py:625
 #: appTools/ToolPaint.py:3267 appTools/ToolPaint.py:3278
 #: appTools/ToolPanelize.py:914 appTools/ToolPanelize.py:925
@@ -1738,7 +1738,7 @@ msgstr "Отредактированное значение находится 
 #: appTools/ToolInvertGerber.py:310 appTools/ToolInvertGerber.py:317
 #: appTools/ToolIsolation.py:3500 appTools/ToolIsolation.py:3507
 #: appTools/ToolMilling.py:2347 appTools/ToolMilling.py:2354
-#: appTools/ToolNCC.py:4454 appTools/ToolNCC.py:4461
+#: appTools/ToolNCC.py:4514 appTools/ToolNCC.py:4521
 #: appTools/ToolOptimal.py:620 appTools/ToolOptimal.py:627
 #: appTools/ToolPaint.py:3273 appTools/ToolPaint.py:3280
 #: appTools/ToolPanelize.py:920 appTools/ToolPanelize.py:927
@@ -1898,8 +1898,8 @@ msgstr "Всего пазов"
 #: appEditors/AppExcEditor.py:2003 appObjects/FlatCAMGeometry.py:706
 #: appObjects/FlatCAMGeometry.py:1232 appObjects/FlatCAMGeometry.py:1974
 #: appObjects/FlatCAMGeometry.py:2633 appTools/ToolIsolation.py:1252
-#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1195
-#: appTools/ToolNCC.py:1332 appTools/ToolPaint.py:889
+#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1197
+#: appTools/ToolNCC.py:1334 appTools/ToolPaint.py:889
 #: appTools/ToolPaint.py:1027 appTools/ToolPaint.py:1740
 #: appTools/ToolSolderPaste.py:455 appTools/ToolSolderPaste.py:527
 msgid "Wrong value format entered, use a number."
@@ -1984,7 +1984,7 @@ msgstr "Имя:"
 
 #: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:620
 #: appGUI/ObjectUI.py:967 appTools/ToolIsolation.py:3010
-#: appTools/ToolNCC.py:3813 appTools/ToolPaint.py:2800
+#: appTools/ToolNCC.py:3873 appTools/ToolPaint.py:2800
 #: appTools/ToolSolderPaste.py:1155
 msgid "Tools Table"
 msgstr "Таблица инструментов"
@@ -2021,7 +2021,7 @@ msgstr ""
 
 #: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1084
 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
-#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3908
+#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3968
 msgid "Diameter for the new tool"
 msgstr "Диаметр нового инструмента"
 
@@ -2394,7 +2394,7 @@ msgstr "Круглый"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:289
 #: appTools/ToolDrilling.py:2588 appTools/ToolExtractDrills.py:486
 #: appTools/ToolExtractDrills.py:619 appTools/ToolIsolation.py:3430
-#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4288
+#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4348
 #: appTools/ToolPaint.py:3168 appTools/ToolPunchGerber.py:759
 #: appTools/ToolPunchGerber.py:909 appTools/ToolQRCode.py:788
 msgid "Square"
@@ -2441,6 +2441,17 @@ msgstr "Текст"
 msgid "Font"
 msgstr "Шрифт"
 
+#: appEditors/AppGeoEditor.py:313 appEditors/AppGerberEditor.py:2495
+#: appEditors/AppGerberEditor.py:3968 appGUI/ObjectUI.py:316
+#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
+#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
+#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
+#: appTools/ToolFiducials.py:770
+msgid "Size"
+msgstr "Размер"
+
 #: appEditors/AppGeoEditor.py:322 appGUI/MainGUI.py:1502
 msgid "Text"
 msgstr "Tекст"
@@ -2460,7 +2471,7 @@ msgstr "Текст"
 #: appTools/ToolIsolation.py:697 appTools/ToolIsolation.py:3166
 #: appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
 #: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:329
-#: appTools/ToolNCC.py:2278 appTools/ToolNCC.py:3980 appTools/ToolPaint.py:304
+#: appTools/ToolNCC.py:2280 appTools/ToolNCC.py:4040 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:2940
 msgid "Tool"
 msgstr "Инструменты"
@@ -2587,7 +2598,7 @@ msgstr "Источник"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:256
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
-#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4244
+#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4304
 #: appTools/ToolPaint.py:3097 appTools/ToolTransform.py:557 defaults.py:566
 msgid "Selection"
 msgstr "Выбор"
@@ -2623,7 +2634,7 @@ msgid "A point of reference in format X,Y."
 msgstr "Точка привязки в формате X,Y."
 
 #: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
-#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2338
+#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2350
 #: appTools/ToolDblSided.py:706 appTools/ToolDblSided.py:892
 #: appTools/ToolNCC.py:63 appTools/ToolPaint.py:137
 #: appTools/ToolSolderPaste.py:160 appTools/ToolSolderPaste.py:1203
@@ -2927,7 +2938,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70
 #: appTools/ToolCalibration.py:881 appTools/ToolDrilling.py:2540
 #: appTools/ToolFilm.py:931 appTools/ToolMilling.py:2218
-#: appTools/ToolNCC.py:3802 appTools/ToolPaint.py:2788
+#: appTools/ToolNCC.py:3862 appTools/ToolPaint.py:2788
 #: appTools/ToolPanelize.py:697 appTools/ToolTransform.py:557
 msgid "Object"
 msgstr "Объект"
@@ -3339,7 +3350,7 @@ msgstr "Линия"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290
 #: appTools/ToolDrilling.py:2589 appTools/ToolIsolation.py:3431
-#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4289
+#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4349
 #: appTools/ToolPaint.py:3169
 msgid "Polygon"
 msgstr "Полигон"
@@ -3374,7 +3385,7 @@ msgstr "Нажмите на целевой точке."
 msgid "Editing MultiGeo Geometry, tool"
 msgstr "Редактирование MultiGeo Geometry, инструментом"
 
-#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2280
+#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2282
 msgid "with diameter"
 msgstr "с диаметром"
 
@@ -3597,17 +3608,6 @@ msgstr "Таблица отверстий для объекта Gerber."
 msgid "Code"
 msgstr "Код"
 
-#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:316
-#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
-#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
-#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
-#: appTools/ToolFiducials.py:770
-msgid "Size"
-msgstr "Размер"
-
 #: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
 #: appGUI/ObjectUI.py:316
 msgid "Dim"
@@ -3710,7 +3710,7 @@ msgstr "Добавляет новое отверстие в список отв
 #: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1132
 #: appObjects/FlatCAMGeometry.py:560 appTools/ToolIsolation.py:70
 #: appTools/ToolIsolation.py:3150 appTools/ToolNCC.py:69
-#: appTools/ToolNCC.py:3964 appTools/ToolPaint.py:143
+#: appTools/ToolNCC.py:4024 appTools/ToolPaint.py:143
 #: appTools/ToolPaint.py:2926 appTools/ToolSolderPaste.py:163
 #: appTools/ToolSolderPaste.py:1209 app_Main.py:6123
 msgid "Delete"
@@ -4134,20 +4134,20 @@ msgid "Open file"
 msgstr "Открыть файл"
 
 #: appEditors/AppTextEditor.py:255 appEditors/AppTextEditor.py:260
-#: appObjects/FlatCAMCNCJob.py:1641 appObjects/FlatCAMCNCJob.py:1646
-#: appObjects/FlatCAMCNCJob.py:1831 appObjects/FlatCAMCNCJob.py:1836
-#: appObjects/FlatCAMCNCJob.py:1909 appObjects/FlatCAMCNCJob.py:1914
+#: appObjects/FlatCAMCNCJob.py:1646 appObjects/FlatCAMCNCJob.py:1651
+#: appObjects/FlatCAMCNCJob.py:1836 appObjects/FlatCAMCNCJob.py:1841
+#: appObjects/FlatCAMCNCJob.py:1914 appObjects/FlatCAMCNCJob.py:1919
 #: appTools/ToolSolderPaste.py:1063 app_Main.py:7038 app_Main.py:7043
 msgid "Export Code ..."
 msgstr "Экспорт кода ..."
 
-#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1663
-#: appObjects/FlatCAMCNCJob.py:1853 appObjects/FlatCAMCNCJob.py:2302
+#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1668
+#: appObjects/FlatCAMCNCJob.py:1858 appObjects/FlatCAMCNCJob.py:2307
 #: appTools/ToolSolderPaste.py:1093
 msgid "No such file or directory"
 msgstr "Нет такого файла или каталога"
 
-#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2316
+#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2321
 msgid "Saved to"
 msgstr "Сохранено в"
 
@@ -4179,7 +4179,7 @@ msgstr "Сохранить GCode"
 msgid "Start GCode"
 msgstr "Открытие G-Code"
 
-#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2007
+#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2012
 #: appTools/ToolCalibration.py:447
 msgid "Loaded Machine Code into Code Editor"
 msgstr "Машинный код загружен в редактор кода"
@@ -4199,7 +4199,7 @@ msgstr "Диаметр"
 
 #: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:999
 #: appGUI/ObjectUI.py:2009 appTools/ToolIsolation.py:3022
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 msgid "TT"
 msgstr "TT"
 
@@ -5262,9 +5262,9 @@ msgstr "Уменьшить"
 msgid "Zoom Fit"
 msgstr "Вернуть масштаб"
 
-#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:2067
-msgid "&Command Line"
-msgstr "&Командная строка"
+#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:1154
+msgid "Command Line"
+msgstr "Командная строка"
 
 #: appGUI/MainGUI.py:924 appGUI/MainGUI.py:2079
 msgid "2Sided Tool"
@@ -5558,10 +5558,6 @@ msgstr "Переключает отображение оси на холсте"
 msgid "Preferences"
 msgstr "Настройки"
 
-#: appGUI/MainGUI.py:1154
-msgid "Command Line"
-msgstr "Командная строка"
-
 #: appGUI/MainGUI.py:1160
 msgid "HUD (Heads up display)"
 msgstr "HUD (Heads-Up Display)"
@@ -5590,11 +5586,18 @@ msgstr ""
 "Абсолютное измерение.\n"
 "Указатель в точке (X=0, Y= 0)"
 
+#: appGUI/MainGUI.py:1194
+#, fuzzy
+#| msgid "Show Shell"
+msgid "TCL Shell"
+msgstr "Показывать командную строку"
+
 #: appGUI/MainGUI.py:1221 appGUI/MainGUI.py:1470 app_Main.py:8143
 msgid "Project"
 msgstr "Проект"
 
-#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272
+#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272 appGUI/MainGUI.py:3791
+#: appGUI/MainGUI.py:3797
 msgid "Plot Area"
 msgstr "Рабочая область"
 
@@ -5687,7 +5690,7 @@ msgstr "Закроет окно настроек без сохранения и
 msgid "Toggle Visibility"
 msgstr "Переключить видимость"
 
-#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2330
+#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2342
 msgid "New"
 msgstr "Создать"
 
@@ -5700,8 +5703,8 @@ msgstr "Создать"
 #: appTools/ToolDblSided.py:767 appTools/ToolFilm.py:929
 #: appTools/ToolFilm.py:952 appTools/ToolImage.py:136 appTools/ToolImage.py:191
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3338
-#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:803
-#: appTools/ToolNCC.py:3788 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:805
+#: appTools/ToolNCC.py:3848 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:587
@@ -5719,7 +5722,7 @@ msgstr "Geometry"
 #: appTools/ToolDblSided.py:527 appTools/ToolDblSided.py:724
 #: appTools/ToolDblSided.py:766 appTools/ToolFilm.py:1207
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPunchGerber.py:803 appTools/ToolPunchGerber.py:818
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:586
@@ -5836,12 +5839,16 @@ msgstr "Да"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:148
 #: appTools/ToolDrilling.py:2090 appTools/ToolIsolation.py:3066
-#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3875
+#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3935
 #: appTools/ToolPaint.py:2851 appTranslation.py:113 appTranslation.py:215
 #: app_Main.py:2290 app_Main.py:3385 app_Main.py:5810 app_Main.py:6894
 msgid "No"
 msgstr "Нет"
 
+#: appGUI/MainGUI.py:2067
+msgid "&Command Line"
+msgstr "&Командная строка"
+
 #: appGUI/MainGUI.py:2086
 msgid "&Cutout Tool"
 msgstr "&Обрезка платы"
@@ -6580,7 +6587,7 @@ msgstr ""
 "с траекториям обрезки за\n"
 "пределами полигонов."
 
-#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4315
+#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4375
 msgid ""
 "Create the Geometry Object\n"
 "for non-copper routing."
@@ -6650,7 +6657,7 @@ msgstr "Полученная геометрия будет иметь закру
 
 #: appGUI/ObjectUI.py:467 appGUI/ObjectUI.py:507 appTools/ToolCutOut.py:2287
 #: appTools/ToolCutOut.py:2302 appTools/ToolIsolation.py:3444
-#: appTools/ToolNCC.py:4312 appTools/ToolPaint.py:3178
+#: appTools/ToolNCC.py:4372 appTools/ToolPaint.py:3178
 msgid "Generate Geometry"
 msgstr "Создать объект"
 
@@ -7015,14 +7022,14 @@ msgstr ""
 "вырезать и отрицательный для \"внутри\" вырезать."
 
 #: appGUI/ObjectUI.py:1079 appTools/ToolIsolation.py:3087
-#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3902 appTools/ToolPaint.py:140
+#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3962 appTools/ToolPaint.py:140
 #: appTools/ToolPaint.py:2878
 msgid "Add from DB"
 msgstr "Добавить из БД"
 
 #: appGUI/ObjectUI.py:1096 appTools/ToolCutOut.py:2071
 #: appTools/ToolIsolation.py:61 appTools/ToolIsolation.py:3122
-#: appTools/ToolNCC.py:3936 appTools/ToolPaint.py:2898
+#: appTools/ToolNCC.py:3996 appTools/ToolPaint.py:2898
 msgid "Search and Add"
 msgstr ""
 
@@ -7036,14 +7043,14 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1103 appTools/ToolCutOut.py:2083
 #: appTools/ToolIsolation.py:65 appTools/ToolIsolation.py:3133
-#: appTools/ToolNCC.py:3947 appTools/ToolPaint.py:2909
+#: appTools/ToolNCC.py:4007 appTools/ToolPaint.py:2909
 #, fuzzy
 #| msgid "Add from DB"
 msgid "Pick from DB"
 msgstr "Добавить из БД"
 
 #: appGUI/ObjectUI.py:1106 appTools/ToolCutOut.py:2086
-#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:3950
+#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:4010
 #: appTools/ToolPaint.py:2912
 #, fuzzy
 #| msgid ""
@@ -7090,8 +7097,8 @@ msgstr ""
 #: appTools/ToolMilling.py:779 appTools/ToolMilling.py:790
 #: appTools/ToolMilling.py:794 appTools/ToolMilling.py:1711
 #: appTools/ToolNCC.py:271 appTools/ToolNCC.py:276 appTools/ToolNCC.py:306
-#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
-#: appTools/ToolNCC.py:3980 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
+#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
+#: appTools/ToolNCC.py:4040 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
 #: appTools/ToolPaint.py:282 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:316 appTools/ToolPaint.py:655
 #: appTools/ToolPaint.py:2940
@@ -7100,7 +7107,7 @@ msgstr "Параметры для"
 
 #: appGUI/ObjectUI.py:1175 appTools/ToolDrilling.py:2119
 #: appTools/ToolIsolation.py:3169 appTools/ToolMilling.py:1714
-#: appTools/ToolNCC.py:3983 appTools/ToolPaint.py:2943
+#: appTools/ToolNCC.py:4043 appTools/ToolPaint.py:2943
 msgid ""
 "The data used for creating GCode.\n"
 "Each tool store it's own set of such data."
@@ -7250,7 +7257,7 @@ msgstr ""
 msgid "Number of time units for spindle to dwell."
 msgstr "Количество единиц времени для остановки шпинделя."
 
-#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2128
+#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2140
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333
@@ -7258,7 +7265,7 @@ msgstr "Количество единиц времени для остановк
 msgid "Probe Z depth"
 msgstr "Глубина зондирования Z"
 
-#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2130
+#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2142
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335
@@ -7277,7 +7284,7 @@ msgstr ""
 msgid "Feedrate Probe"
 msgstr "Датчик скорости подачи"
 
-#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2143
+#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2155
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348
@@ -7287,13 +7294,13 @@ msgstr "Скорость подачи, используемая во время
 
 #: appGUI/ObjectUI.py:1434 appTools/ToolDrilling.py:2364
 #: appTools/ToolIsolation.py:3265 appTools/ToolMilling.py:2042
-#: appTools/ToolNCC.py:4141 appTools/ToolPaint.py:3049
+#: appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3049
 msgid "Apply parameters to all tools"
 msgstr "Применить параметры ко всем инструментам"
 
 #: appGUI/ObjectUI.py:1437 appTools/ToolDrilling.py:2367
 #: appTools/ToolIsolation.py:3268 appTools/ToolMilling.py:2045
-#: appTools/ToolNCC.py:4144 appTools/ToolPaint.py:3052
+#: appTools/ToolNCC.py:4204 appTools/ToolPaint.py:3052
 msgid ""
 "The parameters in the current form will be applied\n"
 "on all the tools from the Tool Table."
@@ -7303,13 +7310,13 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1448 appTools/ToolDrilling.py:2378
 #: appTools/ToolIsolation.py:3279 appTools/ToolMilling.py:2056
-#: appTools/ToolNCC.py:4155 appTools/ToolPaint.py:3063
+#: appTools/ToolNCC.py:4215 appTools/ToolPaint.py:3063
 msgid "Common Parameters"
 msgstr "Общие параметры"
 
 #: appGUI/ObjectUI.py:1450 appTools/ToolDrilling.py:2380
 #: appTools/ToolIsolation.py:3281 appTools/ToolMilling.py:2058
-#: appTools/ToolNCC.py:4157 appTools/ToolPaint.py:3065
+#: appTools/ToolNCC.py:4217 appTools/ToolPaint.py:3065
 msgid "Parameters that are common for all tools."
 msgstr "Параметры, общие для всех инструментов."
 
@@ -7510,7 +7517,7 @@ msgstr "Добавить зону исключения."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286
 #: appTools/ToolDrilling.py:2591 appTools/ToolIsolation.py:3427
-#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4285
+#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4345
 #: appTools/ToolPaint.py:3165
 msgid "The kind of selection shape used for area selection."
 msgstr "Вид формы выделения, используемый для выделения области."
@@ -7752,97 +7759,97 @@ msgstr ""
 msgid "Autolevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2052
+#: appGUI/ObjectUI.py:2053
 msgid "Enable the autolevelling feature."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2069
+#: appGUI/ObjectUI.py:2081
 #, fuzzy
 #| msgid "Tools Table"
 msgid "Probe Points Table"
 msgstr "Таблица инструментов"
 
-#: appGUI/ObjectUI.py:2070
+#: appGUI/ObjectUI.py:2082
 msgid "Generate GCode that will obtain the height map"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2072
+#: appGUI/ObjectUI.py:2084
 msgid "Show"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2073
+#: appGUI/ObjectUI.py:2085
 #, fuzzy
 #| msgid "Toggle the display of axis on canvas"
 msgid "Toggle the display of the Probe Points table."
 msgstr "Переключает отображение оси на холсте"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 #, fuzzy
 #| msgid "Coordinates"
 msgid "X-Y Coordinates"
 msgstr "Координаты"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 #, fuzzy
 #| msgid "Light"
 msgid "Height"
 msgstr "Светлая"
 
-#: appGUI/ObjectUI.py:2090
+#: appGUI/ObjectUI.py:2102
 #, fuzzy
 #| msgid "Plot Options"
 msgid "Plot probing points"
 msgstr "Отрисовка"
 
-#: appGUI/ObjectUI.py:2092
+#: appGUI/ObjectUI.py:2104
 msgid ""
 "Plot the probing points in the table.\n"
 "If a Voronoi method is used then\n"
 "the Voronoi areas are also plotted."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2107
+#: appGUI/ObjectUI.py:2119
 #, fuzzy
 #| msgid "Finished G-Code generation"
 msgid "Probe GCode Generation"
 msgstr "Создание G-кода завершено"
 
-#: appGUI/ObjectUI.py:2109
+#: appGUI/ObjectUI.py:2121
 msgid ""
 "Will create a GCode which will be sent to the controller,\n"
 "either through a file or directly, with the intent to get the height map\n"
 "that is to modify the original GCode to level the cutting height."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2116
+#: appGUI/ObjectUI.py:2128
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
 #, fuzzy
 #| msgid "Probe Z depth"
 msgid "Probe Z travel"
 msgstr "Глубина зондирования Z"
 
-#: appGUI/ObjectUI.py:2118
+#: appGUI/ObjectUI.py:2130
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
 #, fuzzy
 #| msgid "Height (Z) for travelling between the points."
 msgid "The safe Z for probe travelling between probe points."
 msgstr "Высота (Z) для перемещения между точками."
 
-#: appGUI/ObjectUI.py:2141
+#: appGUI/ObjectUI.py:2153
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
 #, fuzzy
 #| msgid "Feedrate"
 msgid "Probe Feedrate"
 msgstr "Скорость подачи"
 
-#: appGUI/ObjectUI.py:2158
+#: appGUI/ObjectUI.py:2170
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
 #, fuzzy
 #| msgid "Mode:"
 msgid "Mode"
 msgstr "Режим:"
 
-#: appGUI/ObjectUI.py:2159
+#: appGUI/ObjectUI.py:2171
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
 msgid ""
 "Choose a mode for height map generation.\n"
@@ -7850,21 +7857,21 @@ msgid ""
 "- Grid: will automatically generate a grid of probe points"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2165
+#: appGUI/ObjectUI.py:2177
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
 #: appTools/ToolCutOut.py:2324 appTools/ToolFiducials.py:801
 msgid "Manual"
 msgstr "Вручную"
 
-#: appGUI/ObjectUI.py:2166
+#: appGUI/ObjectUI.py:2178
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
 #, fuzzy
 #| msgid "Grids"
 msgid "Grid"
 msgstr "Сетка"
 
-#: appGUI/ObjectUI.py:2173
+#: appGUI/ObjectUI.py:2185
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
 msgid ""
 "Choose a method for approximation of heights from autolevelling data.\n"
@@ -7872,125 +7879,125 @@ msgid ""
 "- Bilinear: will use bilinear interpolation. Usable only for grid mode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2179
+#: appGUI/ObjectUI.py:2191
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
 msgid "Voronoi"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2180
+#: appGUI/ObjectUI.py:2192
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
 #, fuzzy
 #| msgid "Linear"
 msgid "Bilinear"
 msgstr "Линейный"
 
-#: appGUI/ObjectUI.py:2193
+#: appGUI/ObjectUI.py:2205
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
 #: appTools/ToolPanelize.py:787
 msgid "Columns"
 msgstr "Столбцы"
 
-#: appGUI/ObjectUI.py:2195
+#: appGUI/ObjectUI.py:2207
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
 msgid "The number of grid columns."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2204
+#: appGUI/ObjectUI.py:2216
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
 #: appTools/ToolPanelize.py:797
 msgid "Rows"
 msgstr "Строки"
 
-#: appGUI/ObjectUI.py:2206
+#: appGUI/ObjectUI.py:2218
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
 msgid "The number of gird rows."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2211
+#: appGUI/ObjectUI.py:2223
 #, fuzzy
 #| msgid "Get Points"
 msgid "Add Probe Points"
 msgstr "Получить точки"
 
-#: appGUI/ObjectUI.py:2219
+#: appGUI/ObjectUI.py:2231
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
 #, fuzzy
 #| msgid "Contour"
 msgid "Controller"
 msgstr "Контур"
 
-#: appGUI/ObjectUI.py:2221
+#: appGUI/ObjectUI.py:2233
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
 msgid ""
 "The kind of controller for which to generate\n"
 "height map gcode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2267 appGUI/ObjectUI.py:2282
-#: appObjects/FlatCAMCNCJob.py:1302 appObjects/FlatCAMCNCJob.py:1324
+#: appGUI/ObjectUI.py:2279 appGUI/ObjectUI.py:2294
+#: appObjects/FlatCAMCNCJob.py:1307 appObjects/FlatCAMCNCJob.py:1329
 #, fuzzy
 #| msgid "Contour"
 msgid "Control"
 msgstr "Контур"
 
-#: appGUI/ObjectUI.py:2277 appGUI/ObjectUI.py:2284
-#: appObjects/FlatCAMCNCJob.py:1304 appObjects/FlatCAMCNCJob.py:1326
+#: appGUI/ObjectUI.py:2289 appGUI/ObjectUI.py:2296
+#: appObjects/FlatCAMCNCJob.py:1309 appObjects/FlatCAMCNCJob.py:1331
 #, fuzzy
 #| msgid "Rendered"
 msgid "Sender"
 msgstr "Отрисовка"
 
-#: appGUI/ObjectUI.py:2298
+#: appGUI/ObjectUI.py:2310
 msgid "COM list"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2300 appGUI/ObjectUI.py:2315
+#: appGUI/ObjectUI.py:2312 appGUI/ObjectUI.py:2327
 msgid "Lists the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2304
+#: appGUI/ObjectUI.py:2316
 msgid "Search"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2306
+#: appGUI/ObjectUI.py:2318
 msgid "Search for the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2313
+#: appGUI/ObjectUI.py:2325
 msgid "Baud rates"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2332
+#: appGUI/ObjectUI.py:2344
 msgid "New, custom baudrate."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2340
+#: appGUI/ObjectUI.py:2352
 msgid "Add the specified custom baudrate to the list."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2346
+#: appGUI/ObjectUI.py:2358
 #, fuzzy
 #| msgid "Delete Selected"
 msgid "Delete selected baudrate"
 msgstr "Удалить выбранное"
 
-#: appGUI/ObjectUI.py:2350
+#: appGUI/ObjectUI.py:2362
 msgid "Reset"
 msgstr "Сбросить"
 
-#: appGUI/ObjectUI.py:2352
+#: appGUI/ObjectUI.py:2364
 msgid "Software reset of the controller."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2358 appObjects/FlatCAMCNCJob.py:1318
+#: appGUI/ObjectUI.py:2370 appObjects/FlatCAMCNCJob.py:1323
 #, fuzzy
 #| msgid "Connect"
 msgid "Disconnected"
 msgstr "Подключение"
 
-#: appGUI/ObjectUI.py:2360
+#: appGUI/ObjectUI.py:2372
 #, fuzzy
 #| msgid ""
 #| "Create a Gerber object from the selected object, within\n"
@@ -8000,131 +8007,131 @@ msgstr ""
 "Создание объекта Gerber из выделенного объекта, в пределах\n"
 "указанного квадрата."
 
-#: appGUI/ObjectUI.py:2385
+#: appGUI/ObjectUI.py:2397
 msgid "Jog"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2393
+#: appGUI/ObjectUI.py:2405
 #, fuzzy
 #| msgid "Zeros"
 msgid "Zero Axes"
 msgstr "Нули"
 
-#: appGUI/ObjectUI.py:2426
+#: appGUI/ObjectUI.py:2438
 msgid "Pause/Resume"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2448
+#: appGUI/ObjectUI.py:2460
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
 msgid "Step"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2450
+#: appGUI/ObjectUI.py:2462
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
 msgid "Each jog action will move the axes with this value."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2462
+#: appGUI/ObjectUI.py:2474
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89
 #: appObjects/FlatCAMObj.py:831 appTools/ToolProperties.py:529
 msgid "Feedrate"
 msgstr "Скорость подачи"
 
-#: appGUI/ObjectUI.py:2464
+#: appGUI/ObjectUI.py:2476
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
 msgid "Feedrate when jogging."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2484
+#: appGUI/ObjectUI.py:2496
 msgid "Send Command"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2486 appGUI/ObjectUI.py:2496
+#: appGUI/ObjectUI.py:2498 appGUI/ObjectUI.py:2508
 msgid "Send a custom command to GRBL."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2491
+#: appGUI/ObjectUI.py:2503
 msgid "Type GRBL command ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2494
+#: appGUI/ObjectUI.py:2506
 msgid "Send"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2502
+#: appGUI/ObjectUI.py:2514
 #, fuzzy
 #| msgid "Text to PDF parameters"
 msgid "Get Config parameter"
 msgstr "Параметры преобразования текста в PDF"
 
-#: appGUI/ObjectUI.py:2504
+#: appGUI/ObjectUI.py:2516
 msgid "A GRBL configuration parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2509
+#: appGUI/ObjectUI.py:2521
 msgid "Type GRBL parameter ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2512
+#: appGUI/ObjectUI.py:2524
 #, fuzzy
 #| msgid "Geo"
 msgid "Get"
 msgstr "Geometry"
 
-#: appGUI/ObjectUI.py:2514
+#: appGUI/ObjectUI.py:2526
 msgid "Get the value of a specified GRBL parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2522
+#: appGUI/ObjectUI.py:2534
 #, fuzzy
 #| msgid "Gerber Export"
 msgid "Get Report"
 msgstr "Экспорт Gerber"
 
-#: appGUI/ObjectUI.py:2524
+#: appGUI/ObjectUI.py:2536
 msgid "Print in shell the GRBL report."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2530
+#: appGUI/ObjectUI.py:2542
 msgid "Apply AutoLevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2532
+#: appGUI/ObjectUI.py:2544
 msgid ""
 "Will send the probing GCode to the GRBL controller,\n"
 "wait for the Z probing data and then apply this data\n"
 "over the original GCode therefore doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2541
+#: appGUI/ObjectUI.py:2553
 msgid "Will save the GRBL height map."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2551
+#: appGUI/ObjectUI.py:2563
 #, fuzzy
 #| msgid "Starting G-Code"
 msgid "Save Probing GCode"
 msgstr "Открытие G-Code"
 
-#: appGUI/ObjectUI.py:2553
+#: appGUI/ObjectUI.py:2565
 #, fuzzy
 #| msgid "Starting G-Code"
 msgid "Will save the probing GCode."
 msgstr "Открытие G-Code"
 
-#: appGUI/ObjectUI.py:2562
+#: appGUI/ObjectUI.py:2574
 msgid "View/Edit the probing GCode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2569 appObjects/FlatCAMCNCJob.py:1735
-#: appObjects/FlatCAMCNCJob.py:1739
+#: appGUI/ObjectUI.py:2581 appObjects/FlatCAMCNCJob.py:1740
+#: appObjects/FlatCAMCNCJob.py:1744
 #, fuzzy
 #| msgid "Import List"
 msgid "Import Height Map"
 msgstr "Импортировать список"
 
-#: appGUI/ObjectUI.py:2571
+#: appGUI/ObjectUI.py:2583
 msgid ""
 "Import the file that has the Z heights\n"
 "obtained through probing and then apply this data\n"
@@ -8132,11 +8139,11 @@ msgid ""
 "doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2589
+#: appGUI/ObjectUI.py:2601
 msgid "Export CNC Code"
 msgstr "Экспорт CNC Code"
 
-#: appGUI/ObjectUI.py:2591
+#: appGUI/ObjectUI.py:2603
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
 msgid ""
@@ -8147,11 +8154,11 @@ msgstr ""
 "для сохранения\n"
 "этого объекта в файл."
 
-#: appGUI/ObjectUI.py:2600
+#: appGUI/ObjectUI.py:2612
 msgid "Save CNC Code"
 msgstr "Сохранить CNC Code"
 
-#: appGUI/ObjectUI.py:2603
+#: appGUI/ObjectUI.py:2615
 msgid ""
 "Opens dialog to save G-Code\n"
 "file."
@@ -8159,84 +8166,84 @@ msgstr ""
 "Открывает диалоговое окно для сохранения\n"
 "файла G-Code."
 
-#: appGUI/ObjectUI.py:2610
+#: appGUI/ObjectUI.py:2622
 #, fuzzy
 #| msgid "View CNC Code"
 msgid "Review CNC Code."
 msgstr "Просмотр CNC Code"
 
-#: appGUI/ObjectUI.py:2671
+#: appGUI/ObjectUI.py:2683
 msgid "Script Object"
 msgstr "Объект сценария"
 
-#: appGUI/ObjectUI.py:2691 appGUI/ObjectUI.py:2765
+#: appGUI/ObjectUI.py:2703 appGUI/ObjectUI.py:2777
 msgid "Auto Completer"
 msgstr "Автозаполнение"
 
-#: appGUI/ObjectUI.py:2693
+#: appGUI/ObjectUI.py:2705
 msgid "This selects if the auto completer is enabled in the Script Editor."
 msgstr ""
 "Этот параметр выбирает, включено ли автозаполнение в редакторе сценариев."
 
-#: appGUI/ObjectUI.py:2738
+#: appGUI/ObjectUI.py:2750
 msgid "Document Object"
 msgstr "Объект Document"
 
-#: appGUI/ObjectUI.py:2767
+#: appGUI/ObjectUI.py:2779
 msgid "This selects if the auto completer is enabled in the Document Editor."
 msgstr ""
 "Этот параметр выбирает, включено ли автозаполнение в редакторе Document."
 
-#: appGUI/ObjectUI.py:2785
+#: appGUI/ObjectUI.py:2797
 msgid "Font Type"
 msgstr "Тип шрифта"
 
-#: appGUI/ObjectUI.py:2802
+#: appGUI/ObjectUI.py:2814
 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
 msgid "Font Size"
 msgstr "Размер шрифта"
 
-#: appGUI/ObjectUI.py:2838
+#: appGUI/ObjectUI.py:2850
 msgid "Alignment"
 msgstr "Выравнивание"
 
-#: appGUI/ObjectUI.py:2843
+#: appGUI/ObjectUI.py:2855
 msgid "Align Left"
 msgstr "Выравнивание по левому краю"
 
-#: appGUI/ObjectUI.py:2848 app_Main.py:4993
+#: appGUI/ObjectUI.py:2860 app_Main.py:4993
 msgid "Center"
 msgstr "По центру"
 
-#: appGUI/ObjectUI.py:2853
+#: appGUI/ObjectUI.py:2865
 msgid "Align Right"
 msgstr "Выравнивание по правому краю"
 
-#: appGUI/ObjectUI.py:2858
+#: appGUI/ObjectUI.py:2870
 msgid "Justify"
 msgstr "Выравнивание по ширине"
 
-#: appGUI/ObjectUI.py:2865
+#: appGUI/ObjectUI.py:2877
 msgid "Font Color"
 msgstr "Цвет шрифта"
 
-#: appGUI/ObjectUI.py:2867
+#: appGUI/ObjectUI.py:2879
 msgid "Set the font color for the selected text"
 msgstr "Устанавливает цвет шрифта для выделенного текста"
 
-#: appGUI/ObjectUI.py:2881
+#: appGUI/ObjectUI.py:2893
 msgid "Selection Color"
 msgstr "Цвет выделения"
 
-#: appGUI/ObjectUI.py:2883
+#: appGUI/ObjectUI.py:2895
 msgid "Set the selection color when doing text selection."
 msgstr "Установка цвета выделения при выделения текста."
 
-#: appGUI/ObjectUI.py:2897
+#: appGUI/ObjectUI.py:2909
 msgid "Tab Size"
 msgstr "Размер вкладки"
 
-#: appGUI/ObjectUI.py:2899
+#: appGUI/ObjectUI.py:2911
 msgid "Set the tab size. In pixels. Default value is 80 pixels."
 msgstr ""
 "Установка размера вкладки. В пикселях. Значение по умолчанию составляет 80 "
@@ -10391,10 +10398,10 @@ msgstr "\"Следовать\""
 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64
 #: appObjects/FlatCAMGerber.py:370 appTools/ToolCopperThieving.py:581
 #: appTools/ToolCopperThieving.py:770 appTools/ToolCopperThieving.py:782
-#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1791
-#: appTools/ToolNCC.py:1818 appTools/ToolNCC.py:1926 appTools/ToolNCC.py:1939
-#: appTools/ToolNCC.py:2785 appTools/ToolNCC.py:2890 appTools/ToolNCC.py:2905
-#: appTools/ToolNCC.py:3171 appTools/ToolNCC.py:3272 appTools/ToolNCC.py:3287
+#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1793
+#: appTools/ToolNCC.py:1820 appTools/ToolNCC.py:1928 appTools/ToolNCC.py:1941
+#: appTools/ToolNCC.py:2845 appTools/ToolNCC.py:2950 appTools/ToolNCC.py:2965
+#: appTools/ToolNCC.py:3231 appTools/ToolNCC.py:3332 appTools/ToolNCC.py:3347
 #: camlib.py:1113
 msgid "Buffering"
 msgstr "Буферизация"
@@ -10723,9 +10730,9 @@ msgstr ""
 
 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
-#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1349
-#: appTools/ToolNCC.py:1665 appTools/ToolNCC.py:1729 appTools/ToolNCC.py:2649
-#: appTools/ToolNCC.py:2658 appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4376
+#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1351
+#: appTools/ToolNCC.py:1667 appTools/ToolNCC.py:1731 appTools/ToolNCC.py:2709
+#: appTools/ToolNCC.py:2718 appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4436
 #: defaults.py:475 tclCommands/TclCommandCopperClear.py:190
 msgid "Itself"
 msgstr "Как есть"
@@ -10736,8 +10743,8 @@ msgstr "Как есть"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1219 appTools/ToolIsolation.py:819
 #: appTools/ToolIsolation.py:1435 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1363 appTools/ToolNCC.py:1681 appTools/ToolNCC.py:1736
-#: appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4386 appTools/ToolPaint.py:1061
+#: appTools/ToolNCC.py:1365 appTools/ToolNCC.py:1683 appTools/ToolNCC.py:1738
+#: appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4446 appTools/ToolPaint.py:1061
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3249
 msgid "Area Selection"
 msgstr "Выбор области"
@@ -10748,9 +10755,9 @@ msgstr "Выбор области"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1220 appTools/ToolDblSided.py:757
 #: appTools/ToolIsolation.py:1475 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1382 appTools/ToolNCC.py:1687 appTools/ToolNCC.py:1744
-#: appTools/ToolNCC.py:2122 appTools/ToolNCC.py:2356 appTools/ToolNCC.py:2694
-#: appTools/ToolNCC.py:4240 appTools/ToolPaint.py:1080
+#: appTools/ToolNCC.py:1384 appTools/ToolNCC.py:1689 appTools/ToolNCC.py:1746
+#: appTools/ToolNCC.py:2124 appTools/ToolNCC.py:2358 appTools/ToolNCC.py:2754
+#: appTools/ToolNCC.py:4300 appTools/ToolPaint.py:1080
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3232
 #: tclCommands/TclCommandCopperClear.py:192 tclCommands/TclCommandPaint.py:166
 msgid "Reference Object"
@@ -12083,7 +12090,7 @@ msgstr "Создание объекта геометрии для фрезеро
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:140
 #: appTools/ToolDrilling.py:2082 appTools/ToolIsolation.py:3058
-#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3867
+#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3927
 #: appTools/ToolPaint.py:2843
 msgid "Tool order"
 msgstr "Порядок инструмента"
@@ -12094,8 +12101,8 @@ msgstr "Порядок инструмента"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141
 #: appTools/ToolDrilling.py:2083 appTools/ToolIsolation.py:3059
-#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3868
-#: appTools/ToolNCC.py:3878 appTools/ToolPaint.py:2844
+#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3928
+#: appTools/ToolNCC.py:3938 appTools/ToolPaint.py:2844
 #: appTools/ToolPaint.py:2854
 msgid ""
 "This set the way that the tools in the tools table are used.\n"
@@ -12123,7 +12130,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:149
 #: appTools/ToolDrilling.py:2091 appTools/ToolIsolation.py:3067
-#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3876
+#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3936
 #: appTools/ToolPaint.py:2852
 msgid "Forward"
 msgstr "Прямой"
@@ -12133,7 +12140,7 @@ msgstr "Прямой"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150
 #: appTools/ToolDrilling.py:2092 appTools/ToolIsolation.py:3068
-#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3877
+#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3937
 #: appTools/ToolPaint.py:2853
 msgid "Reverse"
 msgstr "Обратный"
@@ -12493,7 +12500,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:242
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243
-#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4162
+#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4222
 #: appTools/ToolPaint.py:3069
 msgid "Rest"
 msgstr "Обработка остаточного припуска"
@@ -12545,13 +12552,13 @@ msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:350
-#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4298
+#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4358
 msgid "Check validity"
 msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:352
-#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4300
+#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4360
 msgid ""
 "If checked then the tools diameters are verified\n"
 "if they will provide a complete isolation."
@@ -12677,7 +12684,7 @@ msgstr ""
 "Это значение может находиться в диапазоне от 0,0 до 9999,9 единиц измерения "
 "FlatCAM."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4166
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4226
 msgid ""
 "If checked, use 'rest machining'.\n"
 "Basically it will clear copper outside PCB features,\n"
@@ -12695,7 +12702,7 @@ msgstr ""
 "больше не останется меди для очистки или больше не будет инструментов.\n"
 "Если флажок не установлен, используется стандартный алгоритм."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4246
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4306
 msgid ""
 "Selection of area to be processed.\n"
 "- 'Itself' - the processing extent is based on the object that is "
@@ -12839,7 +12846,7 @@ msgstr "Количество строк нужной панели"
 #: appTools/ToolFilm.py:951 appTools/ToolImage.py:117 appTools/ToolImage.py:138
 #: appTools/ToolImage.py:191 appTools/ToolIsolation.py:802
 #: appTools/ToolIsolation.py:3339 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:3789 appTools/ToolNCC.py:4263
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:3849 appTools/ToolNCC.py:4323
 #: appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
 #: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167
 #: appTools/ToolPanelize.py:715 appTools/ToolPanelize.py:809
@@ -13363,33 +13370,33 @@ msgstr ""
 msgid "created/selected"
 msgstr "создан / выбрана"
 
-#: appObjects/FlatCAMCNCJob.py:637 appObjects/FlatCAMDocument.py:71
+#: appObjects/FlatCAMCNCJob.py:642 appObjects/FlatCAMDocument.py:71
 #: appObjects/FlatCAMScript.py:82
 msgid "<span style=\"color:green;\"><b>Basic</b></span>"
 msgstr "<span style=\"color:green;\"><b>Базовый</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:644 appObjects/FlatCAMDocument.py:75
+#: appObjects/FlatCAMCNCJob.py:649 appObjects/FlatCAMDocument.py:75
 #: appObjects/FlatCAMScript.py:86
 msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
 msgstr "<span style=\"color:red;\"><b>Расширенный</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:780 appObjects/FlatCAMCNCJob.py:1058
+#: appObjects/FlatCAMCNCJob.py:785 appObjects/FlatCAMCNCJob.py:1063
 msgid ""
 "Voronoi function can not be loaded.\n"
 "Shapely >= 1.8 is required"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:808
+#: appObjects/FlatCAMCNCJob.py:813
 #, fuzzy
 #| msgid "Click on Start point ..."
 msgid "Click on canvas to add a Probe Point..."
 msgstr "Нажмите на точку начала отсчета..."
 
-#: appObjects/FlatCAMCNCJob.py:1004
+#: appObjects/FlatCAMCNCJob.py:1009
 msgid "Point is not within the object area. Choose another point."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1024
+#: appObjects/FlatCAMCNCJob.py:1029
 #, fuzzy
 #| msgid ""
 #| "Zone added. Click to start adding next zone or right click to finish."
@@ -13398,139 +13405,139 @@ msgid ""
 "finish ..."
 msgstr "Зона добавлена. Щелкните правой кнопкой мыши для завершения."
 
-#: appObjects/FlatCAMCNCJob.py:1046
+#: appObjects/FlatCAMCNCJob.py:1051
 #, fuzzy
 #| msgid "Finished G-Code processing..."
 msgid "Finished adding Probe Points..."
 msgstr "Разбор G-кода завершен..."
 
-#: appObjects/FlatCAMCNCJob.py:1260
+#: appObjects/FlatCAMCNCJob.py:1265
 #, fuzzy
 #| msgid "Click to place ..."
 msgid "COM list updated ..."
 msgstr "Нажмите для размещения ..."
 
-#: appObjects/FlatCAMCNCJob.py:1296
+#: appObjects/FlatCAMCNCJob.py:1301
 #, fuzzy
 #| msgid "Connect"
 msgid "Connected"
 msgstr "Подключение"
 
-#: appObjects/FlatCAMCNCJob.py:1307
+#: appObjects/FlatCAMCNCJob.py:1312
 msgid "Port connected"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1311
+#: appObjects/FlatCAMCNCJob.py:1316
 msgid "Could not connect to GRBL on port"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1328
+#: appObjects/FlatCAMCNCJob.py:1333
 msgid "Port is connected. Disconnecting"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1330
+#: appObjects/FlatCAMCNCJob.py:1335
 #, fuzzy
 #| msgid "Could not retrieve box object"
 msgid "Could not connect to port"
 msgstr "Не удалось получить объект box"
 
-#: appObjects/FlatCAMCNCJob.py:1360 appObjects/FlatCAMCNCJob.py:1790
+#: appObjects/FlatCAMCNCJob.py:1365 appObjects/FlatCAMCNCJob.py:1795
 #, fuzzy
 #| msgid "Opening G-Code."
 msgid "Sending GCode..."
 msgstr "Открытие G-Code."
 
-#: appObjects/FlatCAMCNCJob.py:1489
+#: appObjects/FlatCAMCNCJob.py:1494
 msgid "GRBL is doing a home cycle."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1495
+#: appObjects/FlatCAMCNCJob.py:1500
 msgid "GRBL software reset was sent."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1503
+#: appObjects/FlatCAMCNCJob.py:1508
 msgid "GRBL resumed."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1507
+#: appObjects/FlatCAMCNCJob.py:1512
 msgid "GRBL paused."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1649 appObjects/FlatCAMCNCJob.py:1839
-#: appObjects/FlatCAMCNCJob.py:1924 appTools/ToolSolderPaste.py:1066
+#: appObjects/FlatCAMCNCJob.py:1654 appObjects/FlatCAMCNCJob.py:1844
+#: appObjects/FlatCAMCNCJob.py:1929 appTools/ToolSolderPaste.py:1066
 msgid "Export cancelled ..."
 msgstr "Экспорт отменён ..."
 
-#: appObjects/FlatCAMCNCJob.py:1673 appObjects/FlatCAMCNCJob.py:1960
+#: appObjects/FlatCAMCNCJob.py:1678 appObjects/FlatCAMCNCJob.py:1965
 #: appObjects/FlatCAMScript.py:134 app_Main.py:7824
 msgid "Loading..."
 msgstr "Загрузка..."
 
-#: appObjects/FlatCAMCNCJob.py:1677
+#: appObjects/FlatCAMCNCJob.py:1682
 #, fuzzy
 #| msgid "There is no such parameter"
 msgid "There is nothing to view"
 msgstr "Такого параметра нет"
 
-#: appObjects/FlatCAMCNCJob.py:1683
+#: appObjects/FlatCAMCNCJob.py:1688
 #, fuzzy
 #| msgid "Gcode Viewer"
 msgid "Code Viewer"
 msgstr "Просмотрщик Gcode"
 
-#: appObjects/FlatCAMCNCJob.py:1721
+#: appObjects/FlatCAMCNCJob.py:1726
 #, fuzzy
 #| msgid "Loaded Machine Code into Code Editor"
 msgid "Loaded Machine Code into Code Viewer"
 msgstr "Машинный код загружен в редактор кода"
 
-#: appObjects/FlatCAMCNCJob.py:1766
+#: appObjects/FlatCAMCNCJob.py:1771
 #, fuzzy
 #| msgid "Failed to open config file"
 msgid "Failed to open height map file"
 msgstr "Не удалось открыть файл конфигурации"
 
-#: appObjects/FlatCAMCNCJob.py:1816
+#: appObjects/FlatCAMCNCJob.py:1821
 msgid "Finished probing. Doing the autolevelling."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1821
+#: appObjects/FlatCAMCNCJob.py:1826
 msgid "Sending probing GCode to the GRBL controller."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1862
+#: appObjects/FlatCAMCNCJob.py:1867
 msgid "Empty GRBL heightmap."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1866
+#: appObjects/FlatCAMCNCJob.py:1871
 #, fuzzy
 #| msgid "Finished G-Code processing..."
 msgid "Finished autolevelling."
 msgstr "Разбор G-кода завершен..."
 
-#: appObjects/FlatCAMCNCJob.py:1880
+#: appObjects/FlatCAMCNCJob.py:1885
 msgid "Plotting..."
 msgstr "Построение..."
 
-#: appObjects/FlatCAMCNCJob.py:1950
+#: appObjects/FlatCAMCNCJob.py:1955
 msgid "File saved to"
 msgstr "Файл сохранён в"
 
-#: appObjects/FlatCAMCNCJob.py:1974
+#: appObjects/FlatCAMCNCJob.py:1979
 #, fuzzy
 #| msgid "Gcode Viewer"
 msgid "Code Review"
 msgstr "Просмотрщик Gcode"
 
-#: appObjects/FlatCAMCNCJob.py:2157
+#: appObjects/FlatCAMCNCJob.py:2162
 msgid "This CNCJob object can't be processed because it is a"
 msgstr "CNCJob объект не может быть обработан, так как"
 
-#: appObjects/FlatCAMCNCJob.py:2159
+#: appObjects/FlatCAMCNCJob.py:2164
 msgid "CNCJob object"
 msgstr "CNCJob object"
 
-#: appObjects/FlatCAMCNCJob.py:2269
+#: appObjects/FlatCAMCNCJob.py:2274
 msgid ""
 "G-code does not have a G94 code.\n"
 "Append Code snippet will not be used.."
@@ -13592,7 +13599,7 @@ msgstr "Конец"
 #: appTools/ToolIsolation.py:531 appTools/ToolIsolation.py:644
 #: appTools/ToolIsolation.py:710 appTools/ToolMilling.py:628
 #: appTools/ToolMilling.py:749 appTools/ToolMilling.py:794
-#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
+#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
 #: appTools/ToolPaint.py:252 appTools/ToolPaint.py:316
 #: appTools/ToolPaint.py:655
 msgid "Multiple Tools"
@@ -13776,7 +13783,7 @@ msgstr "Операция не может быть выполнена."
 
 #: appObjects/FlatCAMGerber.py:558 appObjects/FlatCAMGerber.py:632
 #: appTools/ToolIsolation.py:1583 appTools/ToolIsolation.py:1951
-#: appTools/ToolNCC.py:1854 appTools/ToolNCC.py:2819 appTools/ToolNCC.py:3198
+#: appTools/ToolNCC.py:1856 appTools/ToolNCC.py:2879 appTools/ToolNCC.py:3258
 msgid "Isolation geometry could not be generated."
 msgstr "Геометрия изоляции не может быть сгенерирована."
 
@@ -14195,7 +14202,7 @@ msgstr ""
 #: appTools/ToolEtchCompensation.py:458 appTools/ToolExtractDrills.py:702
 #: appTools/ToolFiducials.py:932 appTools/ToolFilm.py:1383
 #: appTools/ToolInvertGerber.py:286 appTools/ToolIsolation.py:3477
-#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4328
+#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4388
 #: appTools/ToolOptimal.py:593 appTools/ToolPaint.py:3194
 #: appTools/ToolPanelize.py:889 appTools/ToolPunchGerber.py:993
 #: appTools/ToolQRCode.py:904 appTools/ToolRulesCheck.py:1618
@@ -14211,7 +14218,7 @@ msgstr "Сбросить настройки инструмента"
 #: appTools/ToolEtchCompensation.py:461 appTools/ToolExtractDrills.py:705
 #: appTools/ToolFiducials.py:935 appTools/ToolFilm.py:1386
 #: appTools/ToolInvertGerber.py:289 appTools/ToolIsolation.py:3480
-#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4331
+#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4391
 #: appTools/ToolOptimal.py:596 appTools/ToolPaint.py:3197
 #: appTools/ToolPanelize.py:892 appTools/ToolPunchGerber.py:996
 #: appTools/ToolQRCode.py:907 appTools/ToolRulesCheck.py:1621
@@ -14656,8 +14663,8 @@ msgstr "Copper Thieving завершён."
 #: appTools/ToolIsolation.py:908 appTools/ToolIsolation.py:1345
 #: appTools/ToolIsolation.py:1372 appTools/ToolMilling.py:424
 #: appTools/ToolMilling.py:639 appTools/ToolMilling.py:1322
-#: appTools/ToolNCC.py:844 appTools/ToolNCC.py:1306 appTools/ToolNCC.py:1355
-#: appTools/ToolNCC.py:1388 appTools/ToolPaint.py:1086
+#: appTools/ToolNCC.py:846 appTools/ToolNCC.py:1308 appTools/ToolNCC.py:1357
+#: appTools/ToolNCC.py:1390 appTools/ToolPaint.py:1086
 #: appTools/ToolPanelize.py:191 appTools/ToolPanelize.py:205
 #: appTools/ToolSub.py:157 appTools/ToolSub.py:170 appTools/ToolSub.py:359
 #: appTools/ToolSub.py:372 tclCommands/TclCommandCopperClear.py:97
@@ -14688,7 +14695,7 @@ msgstr "Copper Thieving. Подготовка участков для запол
 
 #: appTools/ToolCopperThieving.py:599 appTools/ToolFilm.py:631
 #: appTools/ToolFilm.py:879 appTools/ToolIsolation.py:916
-#: appTools/ToolNCC.py:851 appTools/ToolOptimal.py:145
+#: appTools/ToolNCC.py:853 appTools/ToolOptimal.py:145
 #: appTools/ToolPanelize.py:612 appTools/ToolRulesCheck.py:626
 msgid "Working..."
 msgstr "Обработка…"
@@ -14697,13 +14704,13 @@ msgstr "Обработка…"
 msgid "Geometry not supported for bounding box"
 msgstr "Геометрия не поддерживается для ограничивающих рамок"
 
-#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1679
-#: appTools/ToolNCC.py:1734 appTools/ToolNCC.py:2674 appTools/ToolPaint.py:2457
+#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1681
+#: appTools/ToolNCC.py:1736 appTools/ToolNCC.py:2734 appTools/ToolPaint.py:2457
 msgid "No object available."
 msgstr "Нет доступных объектов."
 
-#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1704
-#: appTools/ToolNCC.py:1757 appTools/ToolNCC.py:2716
+#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1706
+#: appTools/ToolNCC.py:1759 appTools/ToolNCC.py:2776
 msgid "The reference object type is not supported."
 msgstr "Тип указанного объекта не поддерживается."
 
@@ -14761,7 +14768,7 @@ msgstr ""
 "другим объектом."
 
 #: appTools/ToolCopperThieving.py:1231 appTools/ToolIsolation.py:3385
-#: appTools/ToolNCC.py:4257 appTools/ToolPaint.py:3137
+#: appTools/ToolNCC.py:4317 appTools/ToolPaint.py:3137
 msgid "Ref. Type"
 msgstr "Тип ссылки"
 
@@ -14775,12 +14782,12 @@ msgstr ""
 "Это может быть Gerber, Excellon или Geometry."
 
 #: appTools/ToolCopperThieving.py:1242 appTools/ToolIsolation.py:3396
-#: appTools/ToolNCC.py:4267 appTools/ToolPaint.py:3147
+#: appTools/ToolNCC.py:4327 appTools/ToolPaint.py:3147
 msgid "Ref. Object"
 msgstr "Указатель объекта"
 
 #: appTools/ToolCopperThieving.py:1244 appTools/ToolIsolation.py:3398
-#: appTools/ToolNCC.py:4269 appTools/ToolPaint.py:3149
+#: appTools/ToolNCC.py:4329 appTools/ToolPaint.py:3149
 msgid "The FlatCAM object to be used as non copper clearing reference."
 msgstr ""
 "Объект FlatCAM, который будет использоваться как ссылка на очистку от меди."
@@ -14913,7 +14920,7 @@ msgstr "Добавит угловые маркеры к выбранному ф
 
 #: appTools/ToolCutOut.py:281 appTools/ToolIsolation.py:791
 #: appTools/ToolIsolation.py:1049 appTools/ToolIsolation.py:1185
-#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:990 appTools/ToolNCC.py:1128
+#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:992 appTools/ToolNCC.py:1130
 #: appTools/ToolPaint.py:395 appTools/ToolPaint.py:686
 #: appTools/ToolPaint.py:823 appTools/ToolSolderPaste.py:131
 #: appTools/ToolSolderPaste.py:464 app_Main.py:4490
@@ -14923,14 +14930,14 @@ msgstr ""
 "формате."
 
 #: appTools/ToolCutOut.py:357 appTools/ToolIsolation.py:1130
-#: appTools/ToolNCC.py:1073 appTools/ToolPaint.py:767
+#: appTools/ToolNCC.py:1075 appTools/ToolPaint.py:767
 #, fuzzy
 #| msgid "Tools in Tools Database edited but not saved."
 msgid "Tool not in Tools Database. Adding a default tool."
 msgstr "Инструменты в базе данных отредактированы, но не сохранены."
 
 #: appTools/ToolCutOut.py:364 appTools/ToolDrilling.py:955
-#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1080
+#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1082
 #: appTools/ToolPaint.py:775
 msgid ""
 "Cancelled.\n"
@@ -14950,7 +14957,7 @@ msgid "Default tool added."
 msgstr "Значения по умолчанию"
 
 #: appTools/ToolCutOut.py:466 appTools/ToolIsolation.py:2577
-#: appTools/ToolNCC.py:3649 appTools/ToolPaint.py:2620
+#: appTools/ToolNCC.py:3709 appTools/ToolPaint.py:2620
 msgid "Selected tool can't be used here. Pick another."
 msgstr ""
 
@@ -15004,7 +15011,7 @@ msgstr "Операция обрезки закончена."
 #: appTools/ToolEtchCompensation.py:158 appTools/ToolInvertGerber.py:105
 #: appTools/ToolIsolation.py:912 appTools/ToolIsolation.py:1349
 #: appTools/ToolIsolation.py:1376 appTools/ToolMilling.py:1326
-#: appTools/ToolNCC.py:848 appTools/ToolNCC.py:1310 appTools/ToolPaint.py:1003
+#: appTools/ToolNCC.py:850 appTools/ToolNCC.py:1312 appTools/ToolPaint.py:1003
 #: appTools/ToolPanelize.py:196 tclCommands/TclCommandBbox.py:71
 #: tclCommands/TclCommandNregions.py:71
 msgid "Object not found"
@@ -15111,7 +15118,7 @@ msgstr ""
 "объектов, которые будут заполнять поле со списком \"объект\"."
 
 #: appTools/ToolCutOut.py:2074 appTools/ToolIsolation.py:3125
-#: appTools/ToolNCC.py:3939 appTools/ToolPaint.py:2901
+#: appTools/ToolNCC.py:3999 appTools/ToolPaint.py:2901
 msgid ""
 "Add a new tool to the Tool Table\n"
 "with the diameter specified above.\n"
@@ -16362,7 +16369,7 @@ msgstr "Новый инструмент"
 msgid "Adding Tool cancelled"
 msgstr "Добавление инструмента отменено"
 
-#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:879
+#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:881
 #: appTools/ToolOptimal.py:179
 msgid ""
 "The Gerber object has one Polygon as geometry.\n"
@@ -16372,7 +16379,7 @@ msgstr ""
 "Там нет расстояния между геометрическими элементами, которые могут быть "
 "найдены."
 
-#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:924
+#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:926
 #, fuzzy
 #| msgid "tooldia = tool diameter"
 msgid "Optimal tool diameter found"
@@ -16380,7 +16387,7 @@ msgstr "tooldia = диаметр инструмента"
 
 #: appTools/ToolIsolation.py:1000 appTools/ToolIsolation.py:1508
 #: appTools/ToolIsolation.py:1710 appTools/ToolIsolation.py:1897
-#: appTools/ToolNCC.py:935 appTools/ToolNCC.py:1343 appTools/ToolPaint.py:1031
+#: appTools/ToolNCC.py:937 appTools/ToolNCC.py:1345 appTools/ToolPaint.py:1031
 #: appTools/ToolPaint.py:1744
 #, fuzzy
 #| msgid "Failed. No tool selected in the tool table ..."
@@ -16394,44 +16401,44 @@ msgstr ""
 
 #: appTools/ToolIsolation.py:1057 appTools/ToolIsolation.py:1144
 #: appTools/ToolIsolation.py:1206 appTools/ToolIsolation.py:2626
-#: appTools/ToolNCC.py:999 appTools/ToolNCC.py:1087 appTools/ToolNCC.py:1149
-#: appTools/ToolNCC.py:3698 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
+#: appTools/ToolNCC.py:1001 appTools/ToolNCC.py:1089 appTools/ToolNCC.py:1151
+#: appTools/ToolNCC.py:3758 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
 #: appTools/ToolPaint.py:844 appTools/ToolPaint.py:2676
 #: appTools/ToolSolderPaste.py:488
 msgid "Cancelled. Tool already in Tool Table."
 msgstr "Отменено. Инструмент уже в таблице инструментов."
 
-#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1115
+#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1117
 #: appTools/ToolPaint.py:810
 #, fuzzy
 #| msgid "New tool added to Tool Table."
 msgid "New tool added to Tool Table from Tools Database."
 msgstr "Новый инструмент добавлен в таблицу инструментов."
 
-#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1179
+#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1181
 #: appTools/ToolPaint.py:873
 #, fuzzy
 #| msgid "New tool added to Tool Table."
 msgid "Default tool added to Tool Table."
 msgstr "Новый инструмент добавлен в таблицу инструментов."
 
-#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1205
+#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1207
 #: appTools/ToolPaint.py:898
 msgid "Tool from Tool Table was edited."
 msgstr "Инструмент был изменён в таблице инструментов."
 
-#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1218
+#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1220
 #: appTools/ToolPaint.py:911 appTools/ToolSolderPaste.py:548
 msgid "Cancelled. New diameter value is already in the Tool Table."
 msgstr ""
 "Отменено. Новое значение диаметра уже находится в таблице инструментов."
 
-#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1269
+#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1271
 #: appTools/ToolPaint.py:961
 msgid "Delete failed. Select a tool to delete."
 msgstr "Ошибка удаления. Выберите инструмент для удаления."
 
-#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1275
+#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1277
 #: appTools/ToolPaint.py:967
 msgid "Tool(s) deleted from Tool Table."
 msgstr "Инструмент удалён из таблицы инструментов."
@@ -16526,12 +16533,12 @@ msgstr "Нет полигона в выборе."
 msgid "Click the end point of the paint area."
 msgstr "Нажмите на конечную точку области рисования."
 
-#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3662
+#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3722
 #: appTools/ToolPaint.py:2633 app_Main.py:5773 app_Main.py:5783
 msgid "Tool from DB added in Tool Table."
 msgstr "Инструмент из БД добавлен в таблицу инструментов."
 
-#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3715
+#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3775
 #: appTools/ToolPaint.py:2693
 msgid "New tool added to Tool Table."
 msgstr "Новый инструмент добавлен в таблицу инструментов."
@@ -16540,7 +16547,7 @@ msgstr "Новый инструмент добавлен в таблицу ин
 msgid "Gerber object for isolation routing."
 msgstr "Объект Gerber для маршрутизации изоляции."
 
-#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3815
+#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3875
 msgid ""
 "Tools pool from which the algorithm\n"
 "will pick the ones used for copper clearing."
@@ -16566,7 +16573,7 @@ msgstr ""
 "в результирующей геометрии. Это потому, что с некоторыми инструментами\n"
 "эта функция не сможет создавать геометрию маршрутизации."
 
-#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3839
+#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3899
 msgid ""
 "Tool Diameter. It's value (in current FlatCAM units)\n"
 "is the cut width into the material."
@@ -16574,7 +16581,7 @@ msgstr ""
 "Диаметр инструмента. Это значение (в текущих единицах FlatCAM) \n"
 "ширины разреза в материале."
 
-#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3843
+#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3903
 msgid ""
 "The Tool Type (TT) can be:\n"
 "- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
@@ -16608,19 +16615,19 @@ msgstr ""
 " Выбор типа инструмента V-Shape автоматически выберет тип операции\n"
 " в результирующей геометрии как Изоляция."
 
-#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3923
+#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3983
 #, fuzzy
 #| msgid "Optimal Tool"
 msgid "Optimal"
 msgstr "Оптимизация"
 
-#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3927
+#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3987
 msgid ""
 "Find a tool diameter that is guaranteed\n"
 "to do a complete isolation."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:3967
+#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:4027
 #: appTools/ToolPaint.py:2929 appTools/ToolSolderPaste.py:1211
 msgid ""
 "Delete a selection of tools in the Tool Table\n"
@@ -16645,7 +16652,7 @@ msgstr ""
 msgid "Object whose area will be removed from isolation geometry."
 msgstr "Объект, площадь которого будет удалена из геометрии изоляции."
 
-#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4259
+#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4319
 msgid ""
 "The type of FlatCAM object to be used as non copper clearing reference.\n"
 "It can be Gerber, Excellon or Geometry."
@@ -16734,111 +16741,111 @@ msgstr "Нет выбранных объектов."
 msgid "Error when mouse left click."
 msgstr "Ошибка при щелчке левой кнопкой мыши."
 
-#: appTools/ToolNCC.py:835
+#: appTools/ToolNCC.py:837
 msgid "NCC Tool. Checking tools for validity."
 msgstr ""
 
-#: appTools/ToolNCC.py:947
+#: appTools/ToolNCC.py:949
 msgid ""
 "Incomplete isolation. None of the selected tools could do a complete "
 "isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:950
+#: appTools/ToolNCC.py:952
 msgid "At least one of the selected tools can do a complete isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:1722 appTools/ToolNCC.py:2646
+#: appTools/ToolNCC.py:1724 appTools/ToolNCC.py:2706
 msgid "NCC Tool. Preparing non-copper polygons."
 msgstr "Очистка от меди. Подготовка безмедных полигонов."
 
-#: appTools/ToolNCC.py:1782 appTools/ToolNCC.py:2774
+#: appTools/ToolNCC.py:1784 appTools/ToolNCC.py:2834
 msgid "NCC Tool. Calculate 'empty' area."
 msgstr "Очистка от меди. Расчёт «пустой» области."
 
-#: appTools/ToolNCC.py:1793 appTools/ToolNCC.py:1822 appTools/ToolNCC.py:1928
-#: appTools/ToolNCC.py:1941 appTools/ToolNCC.py:2787 appTools/ToolNCC.py:2892
-#: appTools/ToolNCC.py:2907 appTools/ToolNCC.py:3173 appTools/ToolNCC.py:3274
-#: appTools/ToolNCC.py:3289
+#: appTools/ToolNCC.py:1795 appTools/ToolNCC.py:1824 appTools/ToolNCC.py:1930
+#: appTools/ToolNCC.py:1943 appTools/ToolNCC.py:2847 appTools/ToolNCC.py:2952
+#: appTools/ToolNCC.py:2967 appTools/ToolNCC.py:3233 appTools/ToolNCC.py:3334
+#: appTools/ToolNCC.py:3349
 msgid "Buffering finished"
 msgstr "Буферизация закончена"
 
-#: appTools/ToolNCC.py:1797 appTools/ToolNCC.py:1826 appTools/ToolNCC.py:1932
-#: appTools/ToolNCC.py:1944 appTools/ToolNCC.py:2795 appTools/ToolNCC.py:2914
-#: appTools/ToolNCC.py:3180 appTools/ToolNCC.py:3296
+#: appTools/ToolNCC.py:1799 appTools/ToolNCC.py:1828 appTools/ToolNCC.py:1934
+#: appTools/ToolNCC.py:1946 appTools/ToolNCC.py:2855 appTools/ToolNCC.py:2974
+#: appTools/ToolNCC.py:3240 appTools/ToolNCC.py:3356
 msgid "Could not get the extent of the area to be non copper cleared."
 msgstr "Не удалось получить размер области, не подлежащей очистке от меди."
 
-#: appTools/ToolNCC.py:1805 appTools/ToolNCC.py:1955 appTools/ToolNCC.py:2925
+#: appTools/ToolNCC.py:1807 appTools/ToolNCC.py:1957 appTools/ToolNCC.py:2985
 msgid "NCC Tool. Finished calculation of 'empty' area."
 msgstr "Очистка от меди. Закончен расчёт «пустой» области."
 
-#: appTools/ToolNCC.py:1858 appTools/ToolNCC.py:2822 appTools/ToolNCC.py:2899
-#: appTools/ToolNCC.py:3200 appTools/ToolNCC.py:3281
+#: appTools/ToolNCC.py:1860 appTools/ToolNCC.py:2882 appTools/ToolNCC.py:2959
+#: appTools/ToolNCC.py:3260 appTools/ToolNCC.py:3341
 msgid ""
 "Isolation geometry is broken. Margin is less than isolation tool diameter."
 msgstr "Геометрия изоляции нарушена. Отступ меньше диаметра инструмента."
 
-#: appTools/ToolNCC.py:1948 appTools/ToolNCC.py:2918 appTools/ToolNCC.py:3299
+#: appTools/ToolNCC.py:1950 appTools/ToolNCC.py:2978 appTools/ToolNCC.py:3359
 msgid "The selected object is not suitable for copper clearing."
 msgstr "Выбранный объект не подходит для очистки меди."
 
-#: appTools/ToolNCC.py:1998
+#: appTools/ToolNCC.py:2000
 msgid "Clearing the polygon with the method: lines."
 msgstr "Очистка полигона методом: линии."
 
-#: appTools/ToolNCC.py:2008
+#: appTools/ToolNCC.py:2010
 msgid "Failed. Clearing the polygon with the method: seed."
 msgstr "Ошибка. Очистка полигона методом: круговой."
 
-#: appTools/ToolNCC.py:2017
+#: appTools/ToolNCC.py:2019
 msgid "Failed. Clearing the polygon with the method: standard."
 msgstr "Ошибка. Очистка полигона методом: стандартный."
 
-#: appTools/ToolNCC.py:2033
+#: appTools/ToolNCC.py:2035
 #, fuzzy
 #| msgid "Geometry could not be cleared completely"
 msgid "Polygon could not be cleared. Location:"
 msgstr "Геометрия не может быть очищена полностью"
 
-#: appTools/ToolNCC.py:2065 appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2595
-#: appTools/ToolNCC.py:2597
+#: appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2069 appTools/ToolNCC.py:2655
+#: appTools/ToolNCC.py:2657
 msgid "Non-Copper clearing ..."
 msgstr "Очистка от меди ..."
 
-#: appTools/ToolNCC.py:2086
+#: appTools/ToolNCC.py:2088
 msgid ""
 "There is no copper clearing tool in the selection and at least one is needed."
 msgstr ""
 
-#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2742
+#: appTools/ToolNCC.py:2103 appTools/ToolNCC.py:2802
 msgid ""
 "NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
 msgstr ""
 "Очистка от меди. Безмедные полигоны готовы. Началось задание по нормальной "
 "очистке меди."
 
-#: appTools/ToolNCC.py:2129 appTools/ToolNCC.py:2363
+#: appTools/ToolNCC.py:2131 appTools/ToolNCC.py:2365
 msgid "NCC Tool failed creating bounding box."
 msgstr "Инструменту NCC не удалось создать ограничивающую рамку."
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "NCC Tool clearing with tool diameter"
 msgstr "Очистка от меди инструментом с диаметром"
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "started."
 msgstr "запущен."
 
-#: appTools/ToolNCC.py:2277
+#: appTools/ToolNCC.py:2279
 #, fuzzy
 #| msgid "Could not get the extent of the area to be non copper cleared."
 msgid "Could not use the tool for copper clear."
 msgstr "Не удалось получить размер области, не подлежащей очистке от меди."
 
-#: appTools/ToolNCC.py:2299 appTools/ToolNCC.py:3099
+#: appTools/ToolNCC.py:2301 appTools/ToolNCC.py:3159
 msgid ""
 "There is no NCC Geometry in the file.\n"
 "Usually it means that the tool diameter is too big for the painted "
@@ -16850,20 +16857,20 @@ msgstr ""
 "рисования .\n"
 "Измените параметры рисования и повторите попытку."
 
-#: appTools/ToolNCC.py:2309 appTools/ToolNCC.py:3108
+#: appTools/ToolNCC.py:2311 appTools/ToolNCC.py:3168
 msgid "NCC Tool clear all done."
 msgstr "Очистка от меди выполнена."
 
-#: appTools/ToolNCC.py:2312 appTools/ToolNCC.py:3111
+#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:3171
 msgid "NCC Tool clear all done but the copper features isolation is broken for"
 msgstr "Очистка от меди выполнена, но медная изоляция нарушена для"
 
-#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:2510 appTools/ToolNCC.py:3113
-#: appTools/ToolNCC.py:3496
+#: appTools/ToolNCC.py:2316 appTools/ToolNCC.py:2570 appTools/ToolNCC.py:3173
+#: appTools/ToolNCC.py:3556
 msgid "tools"
 msgstr "инструментов"
 
-#: appTools/ToolNCC.py:2341
+#: appTools/ToolNCC.py:2343
 #, fuzzy
 #| msgid "Paint Tool. Rest machining painting area task started."
 msgid "NCC Tool. Rest machining copper clearing task started."
@@ -16871,11 +16878,11 @@ msgstr ""
 "Инструмент рисования. Запущено задание окраски с обработкой остаточного "
 "припуска."
 
-#: appTools/ToolNCC.py:2506 appTools/ToolNCC.py:3492
+#: appTools/ToolNCC.py:2566 appTools/ToolNCC.py:3552
 msgid "NCC Tool Rest Machining clear all done."
 msgstr "Очистка от меди с обработкой остаточного припуска выполнена."
 
-#: appTools/ToolNCC.py:2509 appTools/ToolNCC.py:3495
+#: appTools/ToolNCC.py:2569 appTools/ToolNCC.py:3555
 msgid ""
 "NCC Tool Rest Machining clear all done but the copper features isolation is "
 "broken for"
@@ -16883,11 +16890,11 @@ msgstr ""
 "Очистка от меди с обработкой остаточного припуска выполнена, но медная "
 "изоляция нарушена для"
 
-#: appTools/ToolNCC.py:2607
+#: appTools/ToolNCC.py:2667
 msgid "NCC Tool started. Reading parameters."
 msgstr "Очистка от меди. Чтение параметров."
 
-#: appTools/ToolNCC.py:3594
+#: appTools/ToolNCC.py:3654
 msgid ""
 "Try to use the Buffering Type = Full in Preferences -> Gerber General. "
 "Reload the Gerber file after this change."
@@ -16895,15 +16902,15 @@ msgstr ""
 "Попробуйте использовать тип буферизации = \"Полная\" в Настройки -> Gerber "
 "основный. Перезагрузите файл Gerber после этого изменения."
 
-#: appTools/ToolNCC.py:3750
+#: appTools/ToolNCC.py:3810
 msgid "Non-Copper Clearing"
 msgstr "Очиста от меди"
 
-#: appTools/ToolNCC.py:3779 appTools/ToolPaint.py:2765
+#: appTools/ToolNCC.py:3839 appTools/ToolPaint.py:2765
 msgid "Obj Type"
 msgstr "Тип объекта"
 
-#: appTools/ToolNCC.py:3781
+#: appTools/ToolNCC.py:3841
 msgid ""
 "Specify the type of object to be cleared of excess copper.\n"
 "It can be of type: Gerber or Geometry.\n"
@@ -16915,11 +16922,11 @@ msgstr ""
 "То, что здесь выбрано, будет диктовать вид\n"
 "объектов, которые будут заполнять поле «Объект»."
 
-#: appTools/ToolNCC.py:3803
+#: appTools/ToolNCC.py:3863
 msgid "Object to be cleared of excess copper."
 msgstr "Объект должен быть очищен от избытка меди."
 
-#: appTools/ToolNCC.py:3831
+#: appTools/ToolNCC.py:3891
 msgid ""
 "This is the Tool Number.\n"
 "Non copper clearing will start with the tool with the biggest \n"
@@ -18035,6 +18042,12 @@ msgstr "Очистить текст."
 msgid "...processing..."
 msgstr "...обработка..."
 
+#: appTools/ToolShell.py:293
+#, fuzzy
+#| msgid "FlatCAM Beta"
+msgid "FlatCAM Shell"
+msgstr "FlatCAM Beta"
+
 #: appTools/ToolSolderPaste.py:459
 msgid "Please enter a tool diameter to add, in Float format."
 msgstr ""
@@ -18626,6 +18639,10 @@ msgstr ""
 "Одновременное редактирование геометрии в MultiGeo Geometry невозможно.\n"
 "Редактируйте только одну геометрию за раз."
 
+#: app_Main.py:2261
+msgid "EDITOR Area"
+msgstr ""
+
 #: app_Main.py:2263
 msgid "Editor is activated ..."
 msgstr "Редактор активирован ..."
diff --git a/locale/tr/LC_MESSAGES/strings.mo b/locale/tr/LC_MESSAGES/strings.mo
index 53e09b06..c2cb31c8 100644
Binary files a/locale/tr/LC_MESSAGES/strings.mo and b/locale/tr/LC_MESSAGES/strings.mo differ
diff --git a/locale/tr/LC_MESSAGES/strings.po b/locale/tr/LC_MESSAGES/strings.po
index 27c3dcc0..de4b264f 100644
--- a/locale/tr/LC_MESSAGES/strings.po
+++ b/locale/tr/LC_MESSAGES/strings.po
@@ -5,8 +5,8 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
-"POT-Creation-Date: 2020-10-22 15:08+0300\n"
-"PO-Revision-Date: 2020-10-22 16:13+0300\n"
+"POT-Creation-Date: 2020-10-22 22:03+0300\n"
+"PO-Revision-Date: 2020-10-22 22:03+0300\n"
 "Last-Translator: \n"
 "Language-Team: \n"
 "Language: tr_TR\n"
@@ -14,7 +14,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Generated-By: pygettext.py 1.5\n"
-"X-Generator: Poedit 2.4.1\n"
+"X-Generator: Poedit 2.3.1\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Poedit-Basepath: ../../..\n"
 "X-Poedit-SearchPath-0: .\n"
@@ -108,7 +108,7 @@ msgstr "Yer İşaretleri"
 #: appDatabase.py:2998 appDatabase.py:3044 appEditors/AppExcEditor.py:1023
 #: appEditors/AppExcEditor.py:1091 appEditors/AppTextEditor.py:263
 #: appGUI/MainGUI.py:2878 appGUI/MainGUI.py:3100 appGUI/MainGUI.py:3315
-#: appObjects/FlatCAMCNCJob.py:1745 appObjects/ObjectCollection.py:126
+#: appObjects/FlatCAMCNCJob.py:1750 appObjects/ObjectCollection.py:126
 #: appTools/ToolFilm.py:238 appTools/ToolFilm.py:384 appTools/ToolImage.py:112
 #: appTools/ToolMove.py:269 appTools/ToolPcbWizard.py:189
 #: appTools/ToolPcbWizard.py:212 appTools/ToolQRCode.py:526
@@ -124,8 +124,8 @@ msgid "Cancelled."
 msgstr "İptal edildi."
 
 #: Bookmark.py:308 appDatabase.py:673 appDatabase.py:3006
-#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1667
-#: appObjects/FlatCAMCNCJob.py:1857 appObjects/FlatCAMCNCJob.py:2306
+#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1672
+#: appObjects/FlatCAMCNCJob.py:1862 appObjects/FlatCAMCNCJob.py:2311
 #: appTools/ToolFilm.py:582 appTools/ToolFilm.py:830
 #: appTools/ToolSolderPaste.py:1097 app_Main.py:2666 app_Main.py:8451
 #: app_Main.py:8499 app_Main.py:8628 app_Main.py:8765 app_Main.py:8833
@@ -161,25 +161,25 @@ msgid "The user requested a graceful exit of the current task."
 msgstr "Kullanıcı geçerli işten çıkış istedi."
 
 #: appCommon/Common.py:292 appTools/ToolCopperThieving.py:328
-#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1364
+#: appTools/ToolIsolation.py:1436 appTools/ToolNCC.py:1366
 msgid "Click the start point of the area."
 msgstr "Başlangıç ​​noktasını tıklayın."
 
-#: appCommon/Common.py:351 appTools/ToolNCC.py:1423 appTools/ToolPaint.py:1210
+#: appCommon/Common.py:351 appTools/ToolNCC.py:1425 appTools/ToolPaint.py:1210
 msgid "Click the end point of the area."
 msgstr "Bitiş noktasını tıklayın."
 
 #: appCommon/Common.py:357 appCommon/Common.py:459
 #: appTools/ToolCopperThieving.py:385 appTools/ToolIsolation.py:2348
-#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1429
-#: appTools/ToolNCC.py:1481 appTools/ToolPaint.py:1216
+#: appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1431
+#: appTools/ToolNCC.py:1483 appTools/ToolPaint.py:1216
 #: appTools/ToolPaint.py:1267
 msgid "Zone added. Click to start adding next zone or right click to finish."
 msgstr ""
 "Alan belirlendi. Sonraki bölgeyi belirlemek veya bitirmek için sağ tıklayın."
 
 #: appCommon/Common.py:404 appEditors/AppGeoEditor.py:2352
-#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1452
+#: appTools/ToolIsolation.py:2371 appTools/ToolNCC.py:1454
 #: appTools/ToolPaint.py:1238
 msgid "Click on next Point or click right mouse button to complete ..."
 msgstr "Bir sonraki noktayı tıklayın veya tamamlamak için sağ tıklayın ..."
@@ -283,7 +283,7 @@ msgstr "Uç Adı"
 #: appGUI/ObjectUI.py:1082 appGUI/ObjectUI.py:1650
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:130
 #: appTools/ToolCutOut.py:2060 appTools/ToolIsolation.py:3091
-#: appTools/ToolNCC.py:3906 appTools/ToolNCC.py:3917 appTools/ToolPaint.py:2882
+#: appTools/ToolNCC.py:3966 appTools/ToolNCC.py:3977 appTools/ToolPaint.py:2882
 msgid "Tool Dia"
 msgstr "Uç Kalınlığı"
 
@@ -692,13 +692,13 @@ msgstr ""
 #: appDatabase.py:307 appDatabase.py:684 appDatabase.py:718 appDatabase.py:2647
 #: appDatabase.py:3017 appDatabase.py:3051 appTools/ToolCutOut.py:294
 #: appTools/ToolDrilling.py:895 appTools/ToolIsolation.py:1067
-#: appTools/ToolNCC.py:1009 appTools/ToolPaint.py:704
+#: appTools/ToolNCC.py:1011 appTools/ToolPaint.py:704
 msgid "Could not load Tools DB file."
 msgstr "Araçlar Veri Tabanı dosyası yüklenemedi."
 
 #: appDatabase.py:315 appDatabase.py:726 appDatabase.py:2655
 #: appDatabase.py:3059 appTools/ToolCutOut.py:305 appTools/ToolDrilling.py:903
-#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1020
+#: appTools/ToolIsolation.py:1078 appTools/ToolNCC.py:1022
 #: appTools/ToolPaint.py:715
 msgid "Failed to parse Tools DB file."
 msgstr "Araçlar Veri Tabanı dosyası okunamadı."
@@ -757,7 +757,7 @@ msgstr "FlatCAM Araçlar Veri Tabanını İçe Aktar"
 #: appDatabase.py:3464 appObjects/FlatCAMGeometry.py:1089
 #: appTools/ToolCutOut.py:484 appTools/ToolCutOut.py:525
 #: appTools/ToolIsolation.py:2583 appTools/ToolIsolation.py:2667
-#: appTools/ToolNCC.py:3655 appTools/ToolNCC.py:3735 appTools/ToolPaint.py:2626
+#: appTools/ToolNCC.py:3715 appTools/ToolNCC.py:3795 appTools/ToolPaint.py:2626
 #: appTools/ToolPaint.py:2715 app_Main.py:5676 app_Main.py:5718
 #: app_Main.py:5749 app_Main.py:5769 app_Main.py:5779
 msgid "Tools Database"
@@ -805,7 +805,7 @@ msgstr "PCB Kesim Seçenekleri"
 
 #: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
 #: appGUI/ObjectUI.py:570 appGUI/ObjectUI.py:894 appGUI/ObjectUI.py:1876
-#: appGUI/ObjectUI.py:2681 appGUI/ObjectUI.py:2748
+#: appGUI/ObjectUI.py:2693 appGUI/ObjectUI.py:2760
 #: appTools/ToolCalibration.py:929 appTools/ToolFiducials.py:681
 msgid "Name"
 msgstr "İsim"
@@ -818,7 +818,7 @@ msgstr "İsim"
 #: appTools/ToolDrilling.py:2065 appTools/ToolIsolation.py:3022
 #: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
 #: appTools/ToolMilling.py:1360 appTools/ToolMilling.py:1670
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 #: appTools/ToolPcbWizard.py:404 appTools/ToolProperties.py:417
 #: appTools/ToolProperties.py:480 appTools/ToolSolderPaste.py:1166
 #: tclCommands/TclCommandDrillcncjob.py:195
@@ -856,7 +856,7 @@ msgstr "Ucun maksimum kalınlık toleransını ayarlayın."
 
 #: appDatabase.py:1186 appDatabase.py:1504
 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46
-#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:3990
+#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:4050
 msgid "Operation"
 msgstr "İşlem"
 
@@ -883,7 +883,7 @@ msgstr "Delme"
 
 #: appDatabase.py:1192 appDatabase.py:1514 appDatabase.py:2761
 #: appDatabase.py:3095 appTools/ToolIsolation.py:1101
-#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4000
+#: appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4060
 msgid "Isolation"
 msgstr "Yalıtım"
 
@@ -894,7 +894,7 @@ msgid "Paint"
 msgstr "Çizim"
 
 #: appDatabase.py:1192 appDatabase.py:2773 appDatabase.py:3111
-#: appTools/ToolNCC.py:1044 appTools/ToolNCC.py:3648
+#: appTools/ToolNCC.py:1046 appTools/ToolNCC.py:3708
 msgid "NCC"
 msgstr "Bakır Temizleme"
 
@@ -909,7 +909,7 @@ msgstr "PCB Kesme"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:303
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:284
-#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4283
+#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4343
 #: appTools/ToolPaint.py:3163
 msgid "Shape"
 msgstr "Şekil"
@@ -946,7 +946,7 @@ msgstr ""
 "Z ilerleme hızı\n"
 "Z düzlemindeki hız."
 
-#: appDatabase.py:1506 appTools/ToolNCC.py:3992
+#: appDatabase.py:1506 appTools/ToolNCC.py:4052
 msgid ""
 "The 'Operation' can be:\n"
 "- Isolation -> will ensure that the non-copper clearing is always complete.\n"
@@ -960,7 +960,7 @@ msgstr ""
 "- Temizle -> Geleneksel bakır temizleme."
 
 #: appDatabase.py:1513 appEditors/AppGerberEditor.py:2749
-#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:3999
+#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:4059
 msgid "Clear"
 msgstr "Temizle"
 
@@ -970,7 +970,7 @@ msgstr "Temizle"
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137
 #: appTools/ToolIsolation.py:3204 appTools/ToolMilling.py:1760
-#: appTools/ToolNCC.py:4008
+#: appTools/ToolNCC.py:4068
 msgid "Milling Type"
 msgstr "Freze Tipi"
 
@@ -980,7 +980,7 @@ msgstr "Freze Tipi"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147
 #: appTools/ToolIsolation.py:3206 appTools/ToolIsolation.py:3214
-#: appTools/ToolNCC.py:4010 appTools/ToolNCC.py:4018
+#: appTools/ToolNCC.py:4070 appTools/ToolNCC.py:4078
 msgid ""
 "Milling type when the selected tool is of type: 'iso_op':\n"
 "- climb / best for precision milling and to reduce tool usage\n"
@@ -994,7 +994,7 @@ msgstr ""
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144
-#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4015
+#: appTools/ToolIsolation.py:3211 appTools/ToolNCC.py:4075
 msgid "Climb"
 msgstr "Tırmanma"
 
@@ -1002,7 +1002,7 @@ msgstr "Tırmanma"
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:190
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145
-#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4016
+#: appTools/ToolIsolation.py:3212 appTools/ToolNCC.py:4076
 msgid "Conventional"
 msgstr "Geleneksel"
 
@@ -1013,12 +1013,12 @@ msgstr "Geleneksel"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:161
 #: appTools/ToolDrilling.py:2312 appTools/ToolIsolation.py:3189
-#: appTools/ToolNCC.py:4031 appTools/ToolPaint.py:2955
+#: appTools/ToolNCC.py:4091 appTools/ToolPaint.py:2955
 msgid "Overlap"
 msgstr "Üst Üste Gelme"
 
 #: appDatabase.py:1544 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
-#: appTools/ToolNCC.py:4033
+#: appTools/ToolNCC.py:4093
 msgid ""
 "How much (percentage) of the tool width to overlap each tool pass.\n"
 "Adjust the value starting with lower values\n"
@@ -1049,8 +1049,8 @@ msgstr ""
 #: appTools/ToolCopperThieving.py:1204 appTools/ToolCopperThieving.py:1455
 #: appTools/ToolCorners.py:411 appTools/ToolCutOut.py:2157
 #: appTools/ToolFiducials.py:786 appTools/ToolInvertGerber.py:234
-#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4075
-#: appTools/ToolNCC.py:4178
+#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4135
+#: appTools/ToolNCC.py:4238
 msgid "Margin"
 msgstr "Pay"
 
@@ -1061,25 +1061,25 @@ msgstr "Pay"
 #: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204
 #: appTools/ToolCopperThieving.py:1206 appTools/ToolCorners.py:413
-#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4077
-#: appTools/ToolNCC.py:4180
+#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4137
+#: appTools/ToolNCC.py:4240
 msgid "Bounding box margin."
 msgstr "Sınırlayıcı kutu boşluğu."
 
 #: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
-#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2172
+#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2184
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
 #: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:196
-#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4052
+#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4112
 #: appTools/ToolPaint.py:2991 appTools/ToolPunchGerber.py:793
 msgid "Method"
 msgstr "Yöntem"
 
 #: appDatabase.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
-#: appTools/ToolNCC.py:4054
+#: appTools/ToolNCC.py:4114
 msgid ""
 "Algorithm for copper clearing:\n"
 "- Standard: Fixed step inwards.\n"
@@ -1094,7 +1094,7 @@ msgstr ""
 #: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1963 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1456
+#: appTools/ToolNCC.py:1965 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1456
 #: appTools/ToolPaint.py:3016 defaults.py:346
 #: tclCommands/TclCommandCopperClear.py:126
 #: tclCommands/TclCommandCopperClear.py:134 tclCommands/TclCommandPaint.py:125
@@ -1105,7 +1105,7 @@ msgstr "Standart"
 #: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1974 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1470
+#: appTools/ToolNCC.py:1976 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1470
 #: appTools/ToolPaint.py:3016 defaults.py:469 defaults.py:507
 #: tclCommands/TclCommandCopperClear.py:128
 #: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
@@ -1116,7 +1116,7 @@ msgstr "Nokta Bazlı"
 #: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1702
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1985 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:160
+#: appTools/ToolNCC.py:1987 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:160
 #: appTools/ToolPaint.py:1484 appTools/ToolPaint.py:3016
 #: tclCommands/TclCommandCopperClear.py:130 tclCommands/TclCommandPaint.py:129
 msgid "Lines"
@@ -1125,24 +1125,24 @@ msgstr "Çizgi Bazlı"
 #: appDatabase.py:1586 appDatabase.py:1701
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
-#: appTools/ToolNCC.py:1996 appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1649
+#: appTools/ToolNCC.py:1998 appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1649
 #: appTools/ToolPaint.py:3016 tclCommands/TclCommandPaint.py:133
 msgid "Combo"
 msgstr "Karma"
 
 #: appDatabase.py:1594 appDatabase.py:1712 appEditors/AppGeoEditor.py:505
-#: appGUI/ObjectUI.py:2257 appGUI/ObjectUI.py:2280
+#: appGUI/ObjectUI.py:2269 appGUI/ObjectUI.py:2292
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:222
-#: appObjects/FlatCAMCNCJob.py:1300 appObjects/FlatCAMCNCJob.py:1322
-#: appTools/ToolNCC.py:4088 appTools/ToolNCC.py:4191 appTools/ToolPaint.py:3027
+#: appObjects/FlatCAMCNCJob.py:1305 appObjects/FlatCAMCNCJob.py:1327
+#: appTools/ToolNCC.py:4148 appTools/ToolNCC.py:4251 appTools/ToolPaint.py:3027
 msgid "Connect"
 msgstr "Birleştir"
 
 #: appDatabase.py:1598 appDatabase.py:1715 appEditors/AppGeoEditor.py:507
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
-#: appTools/ToolNCC.py:4092 appTools/ToolNCC.py:4193 appTools/ToolPaint.py:3030
+#: appTools/ToolNCC.py:4152 appTools/ToolNCC.py:4253 appTools/ToolPaint.py:3030
 msgid ""
 "Draw lines between resulting\n"
 "segments to minimize tool lifts."
@@ -1153,14 +1153,14 @@ msgstr ""
 #: appDatabase.py:1604 appDatabase.py:1719 appEditors/AppGeoEditor.py:515
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:230
-#: appTools/ToolNCC.py:4098 appTools/ToolNCC.py:4199 appTools/ToolPaint.py:3034
+#: appTools/ToolNCC.py:4158 appTools/ToolNCC.py:4259 appTools/ToolPaint.py:3034
 msgid "Contour"
 msgstr "Kenar"
 
 #: appDatabase.py:1608 appDatabase.py:1722 appEditors/AppGeoEditor.py:517
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232
-#: appTools/ToolNCC.py:4102 appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3037
+#: appTools/ToolNCC.py:4162 appTools/ToolNCC.py:4261 appTools/ToolPaint.py:3037
 msgid ""
 "Cut around the perimeter of the polygon\n"
 "to trim rough edges."
@@ -1174,13 +1174,13 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
 #: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
-#: appTools/ToolNCC.py:4108 appTools/ToolNCC.py:4207 appTools/ToolPaint.py:2976
+#: appTools/ToolNCC.py:4168 appTools/ToolNCC.py:4267 appTools/ToolPaint.py:2976
 #: appTools/ToolPaint.py:3083 appTools/ToolTransform.py:517
 msgid "Offset"
 msgstr "Hizala"
 
 #: appDatabase.py:1618 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
-#: appTools/ToolNCC.py:4112 appTools/ToolNCC.py:4209
+#: appTools/ToolNCC.py:4172 appTools/ToolNCC.py:4269
 msgid ""
 "If used, it will add an offset to the copper features.\n"
 "The copper clearing will finish to a distance\n"
@@ -1666,7 +1666,7 @@ msgstr ""
 #: appTools/ToolInvertGerber.py:304 appTools/ToolInvertGerber.py:315
 #: appTools/ToolIsolation.py:3494 appTools/ToolIsolation.py:3505
 #: appTools/ToolMilling.py:2341 appTools/ToolMilling.py:2352
-#: appTools/ToolNCC.py:4448 appTools/ToolNCC.py:4459
+#: appTools/ToolNCC.py:4508 appTools/ToolNCC.py:4519
 #: appTools/ToolOptimal.py:614 appTools/ToolOptimal.py:625
 #: appTools/ToolPaint.py:3267 appTools/ToolPaint.py:3278
 #: appTools/ToolPanelize.py:914 appTools/ToolPanelize.py:925
@@ -1702,7 +1702,7 @@ msgstr "Düzenlenen değer aralık dışında"
 #: appTools/ToolInvertGerber.py:310 appTools/ToolInvertGerber.py:317
 #: appTools/ToolIsolation.py:3500 appTools/ToolIsolation.py:3507
 #: appTools/ToolMilling.py:2347 appTools/ToolMilling.py:2354
-#: appTools/ToolNCC.py:4454 appTools/ToolNCC.py:4461
+#: appTools/ToolNCC.py:4514 appTools/ToolNCC.py:4521
 #: appTools/ToolOptimal.py:620 appTools/ToolOptimal.py:627
 #: appTools/ToolPaint.py:3273 appTools/ToolPaint.py:3280
 #: appTools/ToolPanelize.py:920 appTools/ToolPanelize.py:927
@@ -1855,8 +1855,8 @@ msgstr "Toplam Yuva"
 #: appEditors/AppExcEditor.py:2003 appObjects/FlatCAMGeometry.py:706
 #: appObjects/FlatCAMGeometry.py:1232 appObjects/FlatCAMGeometry.py:1974
 #: appObjects/FlatCAMGeometry.py:2633 appTools/ToolIsolation.py:1252
-#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1195
-#: appTools/ToolNCC.py:1332 appTools/ToolPaint.py:889
+#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1197
+#: appTools/ToolNCC.py:1334 appTools/ToolPaint.py:889
 #: appTools/ToolPaint.py:1027 appTools/ToolPaint.py:1740
 #: appTools/ToolSolderPaste.py:455 appTools/ToolSolderPaste.py:527
 msgid "Wrong value format entered, use a number."
@@ -1938,7 +1938,7 @@ msgstr "İsim:"
 
 #: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:620
 #: appGUI/ObjectUI.py:967 appTools/ToolIsolation.py:3010
-#: appTools/ToolNCC.py:3813 appTools/ToolPaint.py:2800
+#: appTools/ToolNCC.py:3873 appTools/ToolPaint.py:2800
 #: appTools/ToolSolderPaste.py:1155
 msgid "Tools Table"
 msgstr "Araçlar Tablosu"
@@ -1973,7 +1973,7 @@ msgstr ""
 
 #: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1084
 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
-#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3908
+#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3968
 msgid "Diameter for the new tool"
 msgstr "Yeni uç için kalınlık belirle"
 
@@ -2340,7 +2340,7 @@ msgstr "Yuvarlak"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:289
 #: appTools/ToolDrilling.py:2588 appTools/ToolExtractDrills.py:486
 #: appTools/ToolExtractDrills.py:619 appTools/ToolIsolation.py:3430
-#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4288
+#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4348
 #: appTools/ToolPaint.py:3168 appTools/ToolPunchGerber.py:759
 #: appTools/ToolPunchGerber.py:909 appTools/ToolQRCode.py:788
 msgid "Square"
@@ -2385,6 +2385,17 @@ msgstr "Metin Ekle"
 msgid "Font"
 msgstr "Yazı Tipi"
 
+#: appEditors/AppGeoEditor.py:313 appEditors/AppGerberEditor.py:2495
+#: appEditors/AppGerberEditor.py:3968 appGUI/ObjectUI.py:316
+#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
+#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
+#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
+#: appTools/ToolFiducials.py:770
+msgid "Size"
+msgstr "Boyut"
+
 #: appEditors/AppGeoEditor.py:322 appGUI/MainGUI.py:1502
 msgid "Text"
 msgstr "Metin"
@@ -2404,7 +2415,7 @@ msgstr "Metin Aracı"
 #: appTools/ToolIsolation.py:697 appTools/ToolIsolation.py:3166
 #: appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
 #: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:329
-#: appTools/ToolNCC.py:2278 appTools/ToolNCC.py:3980 appTools/ToolPaint.py:304
+#: appTools/ToolNCC.py:2280 appTools/ToolNCC.py:4040 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:2940
 msgid "Tool"
 msgstr "Araçlar"
@@ -2531,7 +2542,7 @@ msgstr "Orijin"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:256
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
-#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4244
+#: appTools/ToolIsolation.py:3368 appTools/ToolNCC.py:4304
 #: appTools/ToolPaint.py:3097 appTools/ToolTransform.py:557 defaults.py:566
 msgid "Selection"
 msgstr "Seçim"
@@ -2567,7 +2578,7 @@ msgid "A point of reference in format X,Y."
 msgstr "X,Y biçiminde referans noktası."
 
 #: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
-#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2338
+#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2350
 #: appTools/ToolDblSided.py:706 appTools/ToolDblSided.py:892
 #: appTools/ToolNCC.py:63 appTools/ToolPaint.py:137
 #: appTools/ToolSolderPaste.py:160 appTools/ToolSolderPaste.py:1203
@@ -2871,7 +2882,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70
 #: appTools/ToolCalibration.py:881 appTools/ToolDrilling.py:2540
 #: appTools/ToolFilm.py:931 appTools/ToolMilling.py:2218
-#: appTools/ToolNCC.py:3802 appTools/ToolPaint.py:2788
+#: appTools/ToolNCC.py:3862 appTools/ToolPaint.py:2788
 #: appTools/ToolPanelize.py:697 appTools/ToolTransform.py:557
 msgid "Object"
 msgstr "Nesne"
@@ -3292,7 +3303,7 @@ msgstr "Çizgi"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290
 #: appTools/ToolDrilling.py:2589 appTools/ToolIsolation.py:3431
-#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4289
+#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4349
 #: appTools/ToolPaint.py:3169
 msgid "Polygon"
 msgstr "Çokgen"
@@ -3327,7 +3338,7 @@ msgstr "Hedef noktayı tıkla."
 msgid "Editing MultiGeo Geometry, tool"
 msgstr "MultiGeometry (Çoklu şekil) Şeklini Düzenleme, araç"
 
-#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2280
+#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2282
 msgid "with diameter"
 msgstr "çap ile"
 
@@ -3548,17 +3559,6 @@ msgstr "Gerber nesnesi için şekil tablosu."
 msgid "Code"
 msgstr "Kod"
 
-#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:316
-#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
-#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
-#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
-#: appTools/ToolFiducials.py:770
-msgid "Size"
-msgstr "Boyut"
-
 #: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
 #: appGUI/ObjectUI.py:316
 msgid "Dim"
@@ -3662,7 +3662,7 @@ msgstr "Şekil Tablosuna yeni bir şekil ekler."
 #: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1132
 #: appObjects/FlatCAMGeometry.py:560 appTools/ToolIsolation.py:70
 #: appTools/ToolIsolation.py:3150 appTools/ToolNCC.py:69
-#: appTools/ToolNCC.py:3964 appTools/ToolPaint.py:143
+#: appTools/ToolNCC.py:4024 appTools/ToolPaint.py:143
 #: appTools/ToolPaint.py:2926 appTools/ToolSolderPaste.py:163
 #: appTools/ToolSolderPaste.py:1209 app_Main.py:6123
 msgid "Delete"
@@ -4074,20 +4074,20 @@ msgid "Open file"
 msgstr "Dosyayı Aç"
 
 #: appEditors/AppTextEditor.py:255 appEditors/AppTextEditor.py:260
-#: appObjects/FlatCAMCNCJob.py:1641 appObjects/FlatCAMCNCJob.py:1646
-#: appObjects/FlatCAMCNCJob.py:1831 appObjects/FlatCAMCNCJob.py:1836
-#: appObjects/FlatCAMCNCJob.py:1909 appObjects/FlatCAMCNCJob.py:1914
+#: appObjects/FlatCAMCNCJob.py:1646 appObjects/FlatCAMCNCJob.py:1651
+#: appObjects/FlatCAMCNCJob.py:1836 appObjects/FlatCAMCNCJob.py:1841
+#: appObjects/FlatCAMCNCJob.py:1914 appObjects/FlatCAMCNCJob.py:1919
 #: appTools/ToolSolderPaste.py:1063 app_Main.py:7038 app_Main.py:7043
 msgid "Export Code ..."
 msgstr "Kodu Dışa Aktar ..."
 
-#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1663
-#: appObjects/FlatCAMCNCJob.py:1853 appObjects/FlatCAMCNCJob.py:2302
+#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1668
+#: appObjects/FlatCAMCNCJob.py:1858 appObjects/FlatCAMCNCJob.py:2307
 #: appTools/ToolSolderPaste.py:1093
 msgid "No such file or directory"
 msgstr "Böyle bir dosya ya da dizin yok"
 
-#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2316
+#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2321
 msgid "Saved to"
 msgstr "Şuraya kaydedildi"
 
@@ -4111,7 +4111,7 @@ msgstr "G Kodu Üstbilgi"
 msgid "Start GCode"
 msgstr "G Kod'u Başlat"
 
-#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2007
+#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2012
 #: appTools/ToolCalibration.py:447
 msgid "Loaded Machine Code into Code Editor"
 msgstr "Kod düzenleyiciye makine kodu yüklendi"
@@ -4129,7 +4129,7 @@ msgstr "Boyut"
 
 #: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:999
 #: appGUI/ObjectUI.py:2009 appTools/ToolIsolation.py:3022
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 msgid "TT"
 msgstr "TT"
 
@@ -5158,8 +5158,8 @@ msgstr "Uzaklaştır"
 msgid "Zoom Fit"
 msgstr "Ekrana Sığdır"
 
-#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:2067
-msgid "&Command Line"
+#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:1154
+msgid "Command Line"
 msgstr "Komut Satırı"
 
 #: appGUI/MainGUI.py:924 appGUI/MainGUI.py:2079
@@ -5452,10 +5452,6 @@ msgstr "Çalışma alanındaki eksen görüntüsünü değiştirir"
 msgid "Preferences"
 msgstr "Ayarlar"
 
-#: appGUI/MainGUI.py:1154
-msgid "Command Line"
-msgstr "Komut Satırı"
-
 #: appGUI/MainGUI.py:1160
 msgid "HUD (Heads up display)"
 msgstr "HUD (Koordinat Ekranı)"
@@ -5484,11 +5480,18 @@ msgstr ""
 "Kesin ölçüm.\n"
 "Referans (X = 0, Y = 0) konumudur"
 
+#: appGUI/MainGUI.py:1194
+#, fuzzy
+#| msgid "Show Shell"
+msgid "TCL Shell"
+msgstr "Komut Satırını Göster"
+
 #: appGUI/MainGUI.py:1221 appGUI/MainGUI.py:1470 app_Main.py:8143
 msgid "Project"
 msgstr "Proje"
 
-#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272
+#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272 appGUI/MainGUI.py:3791
+#: appGUI/MainGUI.py:3797
 msgid "Plot Area"
 msgstr "Çalışma Alanı"
 
@@ -5581,7 +5584,7 @@ msgstr "Değişiklikleri kaydetmeden ayarlar penceresini kapatır."
 msgid "Toggle Visibility"
 msgstr "Görünürlüğü Değiştir"
 
-#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2330
+#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2342
 msgid "New"
 msgstr "Yeni"
 
@@ -5594,8 +5597,8 @@ msgstr "Yeni"
 #: appTools/ToolDblSided.py:767 appTools/ToolFilm.py:929
 #: appTools/ToolFilm.py:952 appTools/ToolImage.py:136 appTools/ToolImage.py:191
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3338
-#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:803
-#: appTools/ToolNCC.py:3788 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:805
+#: appTools/ToolNCC.py:3848 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:587
@@ -5613,7 +5616,7 @@ msgstr "Şekil"
 #: appTools/ToolDblSided.py:527 appTools/ToolDblSided.py:724
 #: appTools/ToolDblSided.py:766 appTools/ToolFilm.py:1207
 #: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167
 #: appTools/ToolPaint.py:3143 appTools/ToolPanelize.py:147
 #: appTools/ToolPunchGerber.py:803 appTools/ToolPunchGerber.py:818
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:586
@@ -5730,12 +5733,16 @@ msgstr "Evet"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:148
 #: appTools/ToolDrilling.py:2090 appTools/ToolIsolation.py:3066
-#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3875
+#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3935
 #: appTools/ToolPaint.py:2851 appTranslation.py:113 appTranslation.py:215
 #: app_Main.py:2290 app_Main.py:3385 app_Main.py:5810 app_Main.py:6894
 msgid "No"
 msgstr "Hayır"
 
+#: appGUI/MainGUI.py:2067
+msgid "&Command Line"
+msgstr "Komut Satırı"
+
 #: appGUI/MainGUI.py:2086
 msgid "&Cutout Tool"
 msgstr "&PCB Kesimi"
@@ -6461,7 +6468,7 @@ msgid ""
 "toolpaths to cut around polygons."
 msgstr "Çokgenleri keserek yollar oluşturma işlemi."
 
-#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4315
+#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4375
 msgid ""
 "Create the Geometry Object\n"
 "for non-copper routing."
@@ -6521,7 +6528,7 @@ msgstr "Ortaya çıkan şeklin köşeleri yuvarlatılmış olacaktır."
 
 #: appGUI/ObjectUI.py:467 appGUI/ObjectUI.py:507 appTools/ToolCutOut.py:2287
 #: appTools/ToolCutOut.py:2302 appTools/ToolIsolation.py:3444
-#: appTools/ToolNCC.py:4312 appTools/ToolPaint.py:3178
+#: appTools/ToolNCC.py:4372 appTools/ToolPaint.py:3178
 msgid "Generate Geometry"
 msgstr "Şekil Oluştur"
 
@@ -6851,14 +6858,14 @@ msgstr ""
 "negatif olabilir."
 
 #: appGUI/ObjectUI.py:1079 appTools/ToolIsolation.py:3087
-#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3902 appTools/ToolPaint.py:140
+#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3962 appTools/ToolPaint.py:140
 #: appTools/ToolPaint.py:2878
 msgid "Add from DB"
 msgstr "Veri Tabanından Ekle"
 
 #: appGUI/ObjectUI.py:1096 appTools/ToolCutOut.py:2071
 #: appTools/ToolIsolation.py:61 appTools/ToolIsolation.py:3122
-#: appTools/ToolNCC.py:3936 appTools/ToolPaint.py:2898
+#: appTools/ToolNCC.py:3996 appTools/ToolPaint.py:2898
 msgid "Search and Add"
 msgstr "Ara ve Ekle"
 
@@ -6872,12 +6879,12 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1103 appTools/ToolCutOut.py:2083
 #: appTools/ToolIsolation.py:65 appTools/ToolIsolation.py:3133
-#: appTools/ToolNCC.py:3947 appTools/ToolPaint.py:2909
+#: appTools/ToolNCC.py:4007 appTools/ToolPaint.py:2909
 msgid "Pick from DB"
 msgstr "Veri Tabanından Seç"
 
 #: appGUI/ObjectUI.py:1106 appTools/ToolCutOut.py:2086
-#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:3950
+#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:4010
 #: appTools/ToolPaint.py:2912
 msgid ""
 "Add a new tool to the Tool Table\n"
@@ -6921,8 +6928,8 @@ msgstr ""
 #: appTools/ToolMilling.py:779 appTools/ToolMilling.py:790
 #: appTools/ToolMilling.py:794 appTools/ToolMilling.py:1711
 #: appTools/ToolNCC.py:271 appTools/ToolNCC.py:276 appTools/ToolNCC.py:306
-#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
-#: appTools/ToolNCC.py:3980 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
+#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
+#: appTools/ToolNCC.py:4040 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
 #: appTools/ToolPaint.py:282 appTools/ToolPaint.py:304
 #: appTools/ToolPaint.py:316 appTools/ToolPaint.py:655
 #: appTools/ToolPaint.py:2940
@@ -6931,7 +6938,7 @@ msgstr "İşlem İçin Seçenekler"
 
 #: appGUI/ObjectUI.py:1175 appTools/ToolDrilling.py:2119
 #: appTools/ToolIsolation.py:3169 appTools/ToolMilling.py:1714
-#: appTools/ToolNCC.py:3983 appTools/ToolPaint.py:2943
+#: appTools/ToolNCC.py:4043 appTools/ToolPaint.py:2943
 msgid ""
 "The data used for creating GCode.\n"
 "Each tool store it's own set of such data."
@@ -7072,7 +7079,7 @@ msgstr ""
 "Ucun gerekli hıza ulaşması için beklenmesi\n"
 "gereken zaman birimi."
 
-#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2128
+#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2140
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333
@@ -7080,7 +7087,7 @@ msgstr ""
 msgid "Probe Z depth"
 msgstr "Prob Z Derinliği"
 
-#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2130
+#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2142
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335
@@ -7099,7 +7106,7 @@ msgstr ""
 msgid "Feedrate Probe"
 msgstr "Probun İlerleme Hızı"
 
-#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2143
+#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2155
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348
@@ -7109,13 +7116,13 @@ msgstr "Prob (algılayıcı) algılama yaparken kullanılan ilerleme hızı."
 
 #: appGUI/ObjectUI.py:1434 appTools/ToolDrilling.py:2364
 #: appTools/ToolIsolation.py:3265 appTools/ToolMilling.py:2042
-#: appTools/ToolNCC.py:4141 appTools/ToolPaint.py:3049
+#: appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3049
 msgid "Apply parameters to all tools"
 msgstr "Seçenekleri Tüm Araçlara Uygula"
 
 #: appGUI/ObjectUI.py:1437 appTools/ToolDrilling.py:2367
 #: appTools/ToolIsolation.py:3268 appTools/ToolMilling.py:2045
-#: appTools/ToolNCC.py:4144 appTools/ToolPaint.py:3052
+#: appTools/ToolNCC.py:4204 appTools/ToolPaint.py:3052
 msgid ""
 "The parameters in the current form will be applied\n"
 "on all the tools from the Tool Table."
@@ -7125,13 +7132,13 @@ msgstr ""
 
 #: appGUI/ObjectUI.py:1448 appTools/ToolDrilling.py:2378
 #: appTools/ToolIsolation.py:3279 appTools/ToolMilling.py:2056
-#: appTools/ToolNCC.py:4155 appTools/ToolPaint.py:3063
+#: appTools/ToolNCC.py:4215 appTools/ToolPaint.py:3063
 msgid "Common Parameters"
 msgstr "Ortak Seçenekler"
 
 #: appGUI/ObjectUI.py:1450 appTools/ToolDrilling.py:2380
 #: appTools/ToolIsolation.py:3281 appTools/ToolMilling.py:2058
-#: appTools/ToolNCC.py:4157 appTools/ToolPaint.py:3065
+#: appTools/ToolNCC.py:4217 appTools/ToolPaint.py:3065
 msgid "Parameters that are common for all tools."
 msgstr "Tüm araçlar için ortak olan seçenekler."
 
@@ -7331,7 +7338,7 @@ msgstr "Bir dışlama alanı ekleyin."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286
 #: appTools/ToolDrilling.py:2591 appTools/ToolIsolation.py:3427
-#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4285
+#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4345
 #: appTools/ToolPaint.py:3165
 msgid "The kind of selection shape used for area selection."
 msgstr "Dışlama alanı seçmek için kullanılan seçim şeklinin görünümü."
@@ -7551,39 +7558,39 @@ msgstr ""
 msgid "Autolevelling"
 msgstr "Otomatik Dengeleme"
 
-#: appGUI/ObjectUI.py:2052
+#: appGUI/ObjectUI.py:2053
 msgid "Enable the autolevelling feature."
 msgstr "Otomatik dengeleme özelliğini etkinleştirin."
 
-#: appGUI/ObjectUI.py:2069
+#: appGUI/ObjectUI.py:2081
 msgid "Probe Points Table"
 msgstr "Prob Noktaları Tablosu"
 
-#: appGUI/ObjectUI.py:2070
+#: appGUI/ObjectUI.py:2082
 msgid "Generate GCode that will obtain the height map"
 msgstr "Yükseklik haritasını elde edecek G-Kodu oluşturun"
 
-#: appGUI/ObjectUI.py:2072
+#: appGUI/ObjectUI.py:2084
 msgid "Show"
 msgstr "Göster"
 
-#: appGUI/ObjectUI.py:2073
+#: appGUI/ObjectUI.py:2085
 msgid "Toggle the display of the Probe Points table."
 msgstr "Prob (algılayıcı) noktaları tablosunun görüntülenmesini sağlar."
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 msgid "X-Y Coordinates"
 msgstr "X-Y Koordinatları"
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 msgid "Height"
 msgstr "Yükseklik"
 
-#: appGUI/ObjectUI.py:2090
+#: appGUI/ObjectUI.py:2102
 msgid "Plot probing points"
 msgstr "Prob (algılayıcı) Noktalarını İşaretleyin"
 
-#: appGUI/ObjectUI.py:2092
+#: appGUI/ObjectUI.py:2104
 msgid ""
 "Plot the probing points in the table.\n"
 "If a Voronoi method is used then\n"
@@ -7592,11 +7599,11 @@ msgstr ""
 "Prob (algılayıcı) noktalarını tabloya çizin.\n"
 "Bir Voronoi yöntemi kullanılırsa, Voronoi alanları da çizilir."
 
-#: appGUI/ObjectUI.py:2107
+#: appGUI/ObjectUI.py:2119
 msgid "Probe GCode Generation"
 msgstr "Prob G-Kod'u Oluştur"
 
-#: appGUI/ObjectUI.py:2109
+#: appGUI/ObjectUI.py:2121
 msgid ""
 "Will create a GCode which will be sent to the controller,\n"
 "either through a file or directly, with the intent to get the height map\n"
@@ -7606,27 +7613,27 @@ msgstr ""
 "için yükseklik haritasını elde etmek amacıyla, bir dosya aracılığıyla\n"
 "veya doğrudan denetleyiciye gönderilecek bir G-Kodu oluşturur."
 
-#: appGUI/ObjectUI.py:2116
+#: appGUI/ObjectUI.py:2128
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
 msgid "Probe Z travel"
 msgstr "Prob Z Yüksekliği"
 
-#: appGUI/ObjectUI.py:2118
+#: appGUI/ObjectUI.py:2130
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
 msgid "The safe Z for probe travelling between probe points."
 msgstr "Probun (algılayıcı) noktalar arasında hareketi sırasında Z yüksekliği."
 
-#: appGUI/ObjectUI.py:2141
+#: appGUI/ObjectUI.py:2153
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
 msgid "Probe Feedrate"
 msgstr "Prob İlerleme Hızı"
 
-#: appGUI/ObjectUI.py:2158
+#: appGUI/ObjectUI.py:2170
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
 msgid "Mode"
 msgstr "Yöntem"
 
-#: appGUI/ObjectUI.py:2159
+#: appGUI/ObjectUI.py:2171
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
 msgid ""
 "Choose a mode for height map generation.\n"
@@ -7638,19 +7645,19 @@ msgstr ""
 "seçer\n"
 "- Izgara: Otomatik olarak bir prob (algılayıcı) noktaları ızgarası oluşturur"
 
-#: appGUI/ObjectUI.py:2165
+#: appGUI/ObjectUI.py:2177
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
 #: appTools/ToolCutOut.py:2324 appTools/ToolFiducials.py:801
 msgid "Manual"
 msgstr "El İle"
 
-#: appGUI/ObjectUI.py:2166
+#: appGUI/ObjectUI.py:2178
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
 msgid "Grid"
 msgstr "Izgara"
 
-#: appGUI/ObjectUI.py:2173
+#: appGUI/ObjectUI.py:2185
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
 msgid ""
 "Choose a method for approximation of heights from autolevelling data.\n"
@@ -7662,50 +7669,50 @@ msgstr ""
 "- Çift Çizgili: Çift çizgili enterpolasyon kullanacaktır. Yalnızca ızgara "
 "modu için kullanılabilir."
 
-#: appGUI/ObjectUI.py:2179
+#: appGUI/ObjectUI.py:2191
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
 msgid "Voronoi"
 msgstr "Voronoi"
 
-#: appGUI/ObjectUI.py:2180
+#: appGUI/ObjectUI.py:2192
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
 msgid "Bilinear"
 msgstr "Çift Çizgili"
 
-#: appGUI/ObjectUI.py:2193
+#: appGUI/ObjectUI.py:2205
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
 #: appTools/ToolPanelize.py:787
 msgid "Columns"
 msgstr "Sütunlar"
 
-#: appGUI/ObjectUI.py:2195
+#: appGUI/ObjectUI.py:2207
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
 msgid "The number of grid columns."
 msgstr "Izgara sütunlarının sayısı."
 
-#: appGUI/ObjectUI.py:2204
+#: appGUI/ObjectUI.py:2216
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
 #: appTools/ToolPanelize.py:797
 msgid "Rows"
 msgstr "Satırlar"
 
-#: appGUI/ObjectUI.py:2206
+#: appGUI/ObjectUI.py:2218
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
 msgid "The number of gird rows."
 msgstr "Izgara satırlarının sayısı."
 
-#: appGUI/ObjectUI.py:2211
+#: appGUI/ObjectUI.py:2223
 msgid "Add Probe Points"
 msgstr "Prob Noktaları Ekleyin"
 
-#: appGUI/ObjectUI.py:2219
+#: appGUI/ObjectUI.py:2231
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
 msgid "Controller"
 msgstr "Denetleyici"
 
-#: appGUI/ObjectUI.py:2221
+#: appGUI/ObjectUI.py:2233
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
 msgid ""
 "The kind of controller for which to generate\n"
@@ -7714,147 +7721,147 @@ msgstr ""
 "Yükseklik haritasının G-Kode'unu oluşturacak \n"
 "denetleyici türü."
 
-#: appGUI/ObjectUI.py:2267 appGUI/ObjectUI.py:2282
-#: appObjects/FlatCAMCNCJob.py:1302 appObjects/FlatCAMCNCJob.py:1324
+#: appGUI/ObjectUI.py:2279 appGUI/ObjectUI.py:2294
+#: appObjects/FlatCAMCNCJob.py:1307 appObjects/FlatCAMCNCJob.py:1329
 msgid "Control"
 msgstr "Kontrol"
 
-#: appGUI/ObjectUI.py:2277 appGUI/ObjectUI.py:2284
-#: appObjects/FlatCAMCNCJob.py:1304 appObjects/FlatCAMCNCJob.py:1326
+#: appGUI/ObjectUI.py:2289 appGUI/ObjectUI.py:2296
+#: appObjects/FlatCAMCNCJob.py:1309 appObjects/FlatCAMCNCJob.py:1331
 msgid "Sender"
 msgstr "Gönderici"
 
-#: appGUI/ObjectUI.py:2298
+#: appGUI/ObjectUI.py:2310
 msgid "COM list"
 msgstr "COM listesi"
 
-#: appGUI/ObjectUI.py:2300 appGUI/ObjectUI.py:2315
+#: appGUI/ObjectUI.py:2312 appGUI/ObjectUI.py:2327
 msgid "Lists the available serial ports."
 msgstr "Kullanılabilir seri bağlantı noktalarını listeler."
 
-#: appGUI/ObjectUI.py:2304
+#: appGUI/ObjectUI.py:2316
 msgid "Search"
 msgstr "Ara"
 
-#: appGUI/ObjectUI.py:2306
+#: appGUI/ObjectUI.py:2318
 msgid "Search for the available serial ports."
 msgstr "Kullanılabilir seri bağlantı noktalarını arayın."
 
-#: appGUI/ObjectUI.py:2313
+#: appGUI/ObjectUI.py:2325
 msgid "Baud rates"
 msgstr "İletişim Hızı"
 
-#: appGUI/ObjectUI.py:2332
+#: appGUI/ObjectUI.py:2344
 msgid "New, custom baudrate."
 msgstr "Yeni, özel iletişim hızı."
 
-#: appGUI/ObjectUI.py:2340
+#: appGUI/ObjectUI.py:2352
 msgid "Add the specified custom baudrate to the list."
 msgstr "Belirtilen özel iletişim hızını listeye ekleyin."
 
-#: appGUI/ObjectUI.py:2346
+#: appGUI/ObjectUI.py:2358
 msgid "Delete selected baudrate"
 msgstr "Seçili iletişim hızını sil"
 
-#: appGUI/ObjectUI.py:2350
+#: appGUI/ObjectUI.py:2362
 msgid "Reset"
 msgstr "Sıfırla"
 
-#: appGUI/ObjectUI.py:2352
+#: appGUI/ObjectUI.py:2364
 msgid "Software reset of the controller."
 msgstr "Denetleyicinin yazılım sıfırlaması."
 
-#: appGUI/ObjectUI.py:2358 appObjects/FlatCAMCNCJob.py:1318
+#: appGUI/ObjectUI.py:2370 appObjects/FlatCAMCNCJob.py:1323
 msgid "Disconnected"
 msgstr "Bağlantı kesildi"
 
-#: appGUI/ObjectUI.py:2360
+#: appGUI/ObjectUI.py:2372
 msgid "Connect to the selected port with the selected baud rate."
 msgstr "Seçilen iletişim hızı ile seçilen bağlantı noktasına bağlanın."
 
-#: appGUI/ObjectUI.py:2385
+#: appGUI/ObjectUI.py:2397
 msgid "Jog"
 msgstr "İlerlet"
 
-#: appGUI/ObjectUI.py:2393
+#: appGUI/ObjectUI.py:2405
 msgid "Zero Axes"
 msgstr "Eksenleri Sıfırla"
 
-#: appGUI/ObjectUI.py:2426
+#: appGUI/ObjectUI.py:2438
 msgid "Pause/Resume"
 msgstr "Duraklat/Devam Ettir"
 
-#: appGUI/ObjectUI.py:2448
+#: appGUI/ObjectUI.py:2460
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
 msgid "Step"
 msgstr "Adım"
 
-#: appGUI/ObjectUI.py:2450
+#: appGUI/ObjectUI.py:2462
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
 msgid "Each jog action will move the axes with this value."
 msgstr "Her ilerletme eylemi, eksenleri bu değerle hareket ettirecektir."
 
-#: appGUI/ObjectUI.py:2462
+#: appGUI/ObjectUI.py:2474
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89
 #: appObjects/FlatCAMObj.py:831 appTools/ToolProperties.py:529
 msgid "Feedrate"
 msgstr "İlerleme Hızı"
 
-#: appGUI/ObjectUI.py:2464
+#: appGUI/ObjectUI.py:2476
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
 msgid "Feedrate when jogging."
 msgstr "İlerleme sırasında hareket hızı."
 
-#: appGUI/ObjectUI.py:2484
+#: appGUI/ObjectUI.py:2496
 msgid "Send Command"
 msgstr "Komut Gönder"
 
-#: appGUI/ObjectUI.py:2486 appGUI/ObjectUI.py:2496
+#: appGUI/ObjectUI.py:2498 appGUI/ObjectUI.py:2508
 msgid "Send a custom command to GRBL."
 msgstr "GRBL'ye özel bir komut gönderin."
 
-#: appGUI/ObjectUI.py:2491
+#: appGUI/ObjectUI.py:2503
 msgid "Type GRBL command ..."
 msgstr "GRBL komutunu yazın ..."
 
-#: appGUI/ObjectUI.py:2494
+#: appGUI/ObjectUI.py:2506
 msgid "Send"
 msgstr "Gönder"
 
-#: appGUI/ObjectUI.py:2502
+#: appGUI/ObjectUI.py:2514
 msgid "Get Config parameter"
 msgstr "Yapılandırma Seçeneklerini Al"
 
-#: appGUI/ObjectUI.py:2504
+#: appGUI/ObjectUI.py:2516
 msgid "A GRBL configuration parameter."
 msgstr "Bir GRBL yapılandırma seçeneği."
 
-#: appGUI/ObjectUI.py:2509
+#: appGUI/ObjectUI.py:2521
 msgid "Type GRBL parameter ..."
 msgstr "GRBL seçeneğini girin ..."
 
-#: appGUI/ObjectUI.py:2512
+#: appGUI/ObjectUI.py:2524
 msgid "Get"
 msgstr "Al"
 
-#: appGUI/ObjectUI.py:2514
+#: appGUI/ObjectUI.py:2526
 msgid "Get the value of a specified GRBL parameter."
 msgstr "Belirtilen bir GRBL seçeneğinin değerini alın."
 
-#: appGUI/ObjectUI.py:2522
+#: appGUI/ObjectUI.py:2534
 msgid "Get Report"
 msgstr "Rapor Al"
 
-#: appGUI/ObjectUI.py:2524
+#: appGUI/ObjectUI.py:2536
 msgid "Print in shell the GRBL report."
 msgstr "GRBL raporunu komut satırına yazdırın."
 
-#: appGUI/ObjectUI.py:2530
+#: appGUI/ObjectUI.py:2542
 msgid "Apply AutoLevelling"
 msgstr "Otomatik Dengelemeyi Uygula"
 
-#: appGUI/ObjectUI.py:2532
+#: appGUI/ObjectUI.py:2544
 msgid ""
 "Will send the probing GCode to the GRBL controller,\n"
 "wait for the Z probing data and then apply this data\n"
@@ -7865,28 +7872,28 @@ msgstr ""
 "orijinal G-Kod üzerine uygulayacak ve böylece \n"
 "otomatik dengeleme yapacak."
 
-#: appGUI/ObjectUI.py:2541
+#: appGUI/ObjectUI.py:2553
 msgid "Will save the GRBL height map."
 msgstr "GRBL yükseklik haritasını kaydeder."
 
-#: appGUI/ObjectUI.py:2551
+#: appGUI/ObjectUI.py:2563
 msgid "Save Probing GCode"
 msgstr "Dengeleme G-Kod'unu Kaydet"
 
-#: appGUI/ObjectUI.py:2553
+#: appGUI/ObjectUI.py:2565
 msgid "Will save the probing GCode."
 msgstr "Prob (algılayıcı) G-Kod'unu kaydeder."
 
-#: appGUI/ObjectUI.py:2562
+#: appGUI/ObjectUI.py:2574
 msgid "View/Edit the probing GCode."
 msgstr "Dengeleme G-Kod'unu görüntüleyin/düzenleyin."
 
-#: appGUI/ObjectUI.py:2569 appObjects/FlatCAMCNCJob.py:1735
-#: appObjects/FlatCAMCNCJob.py:1739
+#: appGUI/ObjectUI.py:2581 appObjects/FlatCAMCNCJob.py:1740
+#: appObjects/FlatCAMCNCJob.py:1744
 msgid "Import Height Map"
 msgstr "Yükseklik Haritasını İçe Aktar"
 
-#: appGUI/ObjectUI.py:2571
+#: appGUI/ObjectUI.py:2583
 msgid ""
 "Import the file that has the Z heights\n"
 "obtained through probing and then apply this data\n"
@@ -7897,11 +7904,11 @@ msgstr ""
 "içe aktarın ve ardından bu verileri orijinal G-Kod üzerine \n"
 "uygulayın, böylece otomatik dengeleme yapın."
 
-#: appGUI/ObjectUI.py:2589
+#: appGUI/ObjectUI.py:2601
 msgid "Export CNC Code"
 msgstr "CNC Kodunu Dışa Aktar"
 
-#: appGUI/ObjectUI.py:2591
+#: appGUI/ObjectUI.py:2603
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
 msgid ""
@@ -7911,11 +7918,11 @@ msgstr ""
 "Bu nesneyi bir dosyaya kaydetmek \n"
 "için G-Kod'u dışa aktarın."
 
-#: appGUI/ObjectUI.py:2600
+#: appGUI/ObjectUI.py:2612
 msgid "Save CNC Code"
 msgstr "CNC Kodunu Kaydet"
 
-#: appGUI/ObjectUI.py:2603
+#: appGUI/ObjectUI.py:2615
 msgid ""
 "Opens dialog to save G-Code\n"
 "file."
@@ -7923,86 +7930,86 @@ msgstr ""
 "G-Kod dosyasını kaydetmek için bir\n"
 "iletişim kutusu açar."
 
-#: appGUI/ObjectUI.py:2610
+#: appGUI/ObjectUI.py:2622
 msgid "Review CNC Code."
 msgstr "CNC kodunu kontrol edin."
 
-#: appGUI/ObjectUI.py:2671
+#: appGUI/ObjectUI.py:2683
 msgid "Script Object"
 msgstr "Komut Dosyası Nesnesi"
 
-#: appGUI/ObjectUI.py:2691 appGUI/ObjectUI.py:2765
+#: appGUI/ObjectUI.py:2703 appGUI/ObjectUI.py:2777
 msgid "Auto Completer"
 msgstr "Otomatik Tamamlayıcı"
 
-#: appGUI/ObjectUI.py:2693
+#: appGUI/ObjectUI.py:2705
 msgid "This selects if the auto completer is enabled in the Script Editor."
 msgstr ""
 "Bu seçenek, Kod Düzenleyi'de otomatik \n"
 "tamamlamanın etkin olup olmadığını seçer."
 
-#: appGUI/ObjectUI.py:2738
+#: appGUI/ObjectUI.py:2750
 msgid "Document Object"
 msgstr "Belge Nesnesi"
 
-#: appGUI/ObjectUI.py:2767
+#: appGUI/ObjectUI.py:2779
 msgid "This selects if the auto completer is enabled in the Document Editor."
 msgstr ""
 "Bu seçenek, Belge Düzenleyici'de otomatik tamamlamanın\n"
 "etkin olup olmadığını seçer."
 
-#: appGUI/ObjectUI.py:2785
+#: appGUI/ObjectUI.py:2797
 msgid "Font Type"
 msgstr "Yazı Tipi"
 
-#: appGUI/ObjectUI.py:2802
+#: appGUI/ObjectUI.py:2814
 #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
 msgid "Font Size"
 msgstr "Yazı Boyutu"
 
-#: appGUI/ObjectUI.py:2838
+#: appGUI/ObjectUI.py:2850
 msgid "Alignment"
 msgstr "Hizala"
 
-#: appGUI/ObjectUI.py:2843
+#: appGUI/ObjectUI.py:2855
 msgid "Align Left"
 msgstr "Sola Hizala"
 
-#: appGUI/ObjectUI.py:2848 app_Main.py:4993
+#: appGUI/ObjectUI.py:2860 app_Main.py:4993
 msgid "Center"
 msgstr "Ortala"
 
-#: appGUI/ObjectUI.py:2853
+#: appGUI/ObjectUI.py:2865
 msgid "Align Right"
 msgstr "Sağa Hizala"
 
-#: appGUI/ObjectUI.py:2858
+#: appGUI/ObjectUI.py:2870
 msgid "Justify"
 msgstr "Yasla"
 
-#: appGUI/ObjectUI.py:2865
+#: appGUI/ObjectUI.py:2877
 msgid "Font Color"
 msgstr "Yazı Rengi"
 
-#: appGUI/ObjectUI.py:2867
+#: appGUI/ObjectUI.py:2879
 msgid "Set the font color for the selected text"
 msgstr "Seçilen metnin yazı tipi rengini ayarlar"
 
-#: appGUI/ObjectUI.py:2881
+#: appGUI/ObjectUI.py:2893
 msgid "Selection Color"
 msgstr "Vurgu Rengi"
 
-#: appGUI/ObjectUI.py:2883
+#: appGUI/ObjectUI.py:2895
 msgid "Set the selection color when doing text selection."
 msgstr ""
 "Metin seçimi yaparken seçili metinleri\n"
 "belirlemek için vurgu rengini belirleyin."
 
-#: appGUI/ObjectUI.py:2897
+#: appGUI/ObjectUI.py:2909
 msgid "Tab Size"
 msgstr "Sekme Boyutu"
 
-#: appGUI/ObjectUI.py:2899
+#: appGUI/ObjectUI.py:2911
 msgid "Set the tab size. In pixels. Default value is 80 pixels."
 msgstr ""
 "Sekme boyutunu ayarlayın. Piksel cinsinden.\n"
@@ -10104,10 +10111,10 @@ msgstr "\"Takip Et\""
 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64
 #: appObjects/FlatCAMGerber.py:370 appTools/ToolCopperThieving.py:581
 #: appTools/ToolCopperThieving.py:770 appTools/ToolCopperThieving.py:782
-#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1791
-#: appTools/ToolNCC.py:1818 appTools/ToolNCC.py:1926 appTools/ToolNCC.py:1939
-#: appTools/ToolNCC.py:2785 appTools/ToolNCC.py:2890 appTools/ToolNCC.py:2905
-#: appTools/ToolNCC.py:3171 appTools/ToolNCC.py:3272 appTools/ToolNCC.py:3287
+#: appTools/ToolIsolation.py:1353 appTools/ToolNCC.py:1793
+#: appTools/ToolNCC.py:1820 appTools/ToolNCC.py:1928 appTools/ToolNCC.py:1941
+#: appTools/ToolNCC.py:2845 appTools/ToolNCC.py:2950 appTools/ToolNCC.py:2965
+#: appTools/ToolNCC.py:3231 appTools/ToolNCC.py:3332 appTools/ToolNCC.py:3347
 #: camlib.py:1113
 msgid "Buffering"
 msgstr "Tamponlama Tipi"
@@ -10425,9 +10432,9 @@ msgstr "Bu seçim bakır dolgu ile yollar arasındaki mesafeyi ayarlar."
 
 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
-#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1349
-#: appTools/ToolNCC.py:1665 appTools/ToolNCC.py:1729 appTools/ToolNCC.py:2649
-#: appTools/ToolNCC.py:2658 appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4376
+#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1351
+#: appTools/ToolNCC.py:1667 appTools/ToolNCC.py:1731 appTools/ToolNCC.py:2709
+#: appTools/ToolNCC.py:2718 appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4436
 #: defaults.py:475 tclCommands/TclCommandCopperClear.py:190
 msgid "Itself"
 msgstr "Tamamı"
@@ -10438,8 +10445,8 @@ msgstr "Tamamı"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1219 appTools/ToolIsolation.py:819
 #: appTools/ToolIsolation.py:1435 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1363 appTools/ToolNCC.py:1681 appTools/ToolNCC.py:1736
-#: appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4386 appTools/ToolPaint.py:1061
+#: appTools/ToolNCC.py:1365 appTools/ToolNCC.py:1683 appTools/ToolNCC.py:1738
+#: appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4446 appTools/ToolPaint.py:1061
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3249
 msgid "Area Selection"
 msgstr "Alan"
@@ -10450,9 +10457,9 @@ msgstr "Alan"
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
 #: appTools/ToolCopperThieving.py:1220 appTools/ToolDblSided.py:757
 #: appTools/ToolIsolation.py:1475 appTools/ToolIsolation.py:3378
-#: appTools/ToolNCC.py:1382 appTools/ToolNCC.py:1687 appTools/ToolNCC.py:1744
-#: appTools/ToolNCC.py:2122 appTools/ToolNCC.py:2356 appTools/ToolNCC.py:2694
-#: appTools/ToolNCC.py:4240 appTools/ToolPaint.py:1080
+#: appTools/ToolNCC.py:1384 appTools/ToolNCC.py:1689 appTools/ToolNCC.py:1746
+#: appTools/ToolNCC.py:2124 appTools/ToolNCC.py:2358 appTools/ToolNCC.py:2754
+#: appTools/ToolNCC.py:4300 appTools/ToolPaint.py:1080
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3232
 #: tclCommands/TclCommandCopperClear.py:192 tclCommands/TclCommandPaint.py:166
 msgid "Reference Object"
@@ -11786,7 +11793,7 @@ msgstr "Delik delme ve frezeleme yollarına sahip CNC İşi oluşturun."
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:140
 #: appTools/ToolDrilling.py:2082 appTools/ToolIsolation.py:3058
-#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3867
+#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3927
 #: appTools/ToolPaint.py:2843
 msgid "Tool order"
 msgstr "Uç Sırası"
@@ -11797,8 +11804,8 @@ msgstr "Uç Sırası"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141
 #: appTools/ToolDrilling.py:2083 appTools/ToolIsolation.py:3059
-#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3868
-#: appTools/ToolNCC.py:3878 appTools/ToolPaint.py:2844
+#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3928
+#: appTools/ToolNCC.py:3938 appTools/ToolPaint.py:2844
 #: appTools/ToolPaint.py:2854
 msgid ""
 "This set the way that the tools in the tools table are used.\n"
@@ -11822,7 +11829,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:149
 #: appTools/ToolDrilling.py:2091 appTools/ToolIsolation.py:3067
-#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3876
+#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3936
 #: appTools/ToolPaint.py:2852
 msgid "Forward"
 msgstr "İleri"
@@ -11832,7 +11839,7 @@ msgstr "İleri"
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150
 #: appTools/ToolDrilling.py:2092 appTools/ToolIsolation.py:3068
-#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3877
+#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3937
 #: appTools/ToolPaint.py:2853
 msgid "Reverse"
 msgstr "Geri"
@@ -12186,7 +12193,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:242
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243
-#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4162
+#: appTools/ToolIsolation.py:3286 appTools/ToolNCC.py:4222
 #: appTools/ToolPaint.py:3069
 msgid "Rest"
 msgstr "Kalan İşleme"
@@ -12237,13 +12244,13 @@ msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:350
-#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4298
+#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4358
 msgid "Check validity"
 msgstr "Doğruluğu Kontrol Et"
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:352
-#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4300
+#: appTools/ToolIsolation.py:3322 appTools/ToolNCC.py:4360
 msgid ""
 "If checked then the tools diameters are verified\n"
 "if they will provide a complete isolation."
@@ -12368,7 +12375,7 @@ msgstr ""
 "kadar olacaktır.\n"
 "Değer 0.0 ile 9999.9 FlatCAM birimleri arasında olabilir."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4166
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4226
 msgid ""
 "If checked, use 'rest machining'.\n"
 "Basically it will clear copper outside PCB features,\n"
@@ -12386,7 +12393,7 @@ msgstr ""
 "daha küçüğe doğru ilerler.\n"
 "Onay kutusu seçilmezse, standart yöntem kullanılır."
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4246
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4306
 msgid ""
 "Selection of area to be processed.\n"
 "- 'Itself' - the processing extent is based on the object that is "
@@ -12522,7 +12529,7 @@ msgstr "İstenen panelin satır sayısı"
 #: appTools/ToolFilm.py:951 appTools/ToolImage.py:117 appTools/ToolImage.py:138
 #: appTools/ToolImage.py:191 appTools/ToolIsolation.py:802
 #: appTools/ToolIsolation.py:3339 appTools/ToolIsolation.py:3391
-#: appTools/ToolNCC.py:803 appTools/ToolNCC.py:3789 appTools/ToolNCC.py:4263
+#: appTools/ToolNCC.py:805 appTools/ToolNCC.py:3849 appTools/ToolNCC.py:4323
 #: appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
 #: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167
 #: appTools/ToolPanelize.py:715 appTools/ToolPanelize.py:809
@@ -13052,17 +13059,17 @@ msgstr ""
 msgid "created/selected"
 msgstr "oluşturuldu/seçildi"
 
-#: appObjects/FlatCAMCNCJob.py:637 appObjects/FlatCAMDocument.py:71
+#: appObjects/FlatCAMCNCJob.py:642 appObjects/FlatCAMDocument.py:71
 #: appObjects/FlatCAMScript.py:82
 msgid "<span style=\"color:green;\"><b>Basic</b></span>"
 msgstr "<span style=\"color:green;\"><b>Basit</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:644 appObjects/FlatCAMDocument.py:75
+#: appObjects/FlatCAMCNCJob.py:649 appObjects/FlatCAMDocument.py:75
 #: appObjects/FlatCAMScript.py:86
 msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
 msgstr "<span style=\"color:red;\"><b>Gelişmiş</b></span>"
 
-#: appObjects/FlatCAMCNCJob.py:780 appObjects/FlatCAMCNCJob.py:1058
+#: appObjects/FlatCAMCNCJob.py:785 appObjects/FlatCAMCNCJob.py:1063
 msgid ""
 "Voronoi function can not be loaded.\n"
 "Shapely >= 1.8 is required"
@@ -13070,15 +13077,15 @@ msgstr ""
 "Voronoi işlevi yüklenemiyor.\n"
 "Shapely> = 1.8 gereklidir"
 
-#: appObjects/FlatCAMCNCJob.py:808
+#: appObjects/FlatCAMCNCJob.py:813
 msgid "Click on canvas to add a Probe Point..."
 msgstr "Prob (algılayıcı) Noktası eklemek için çalışma alanına tıklayın ..."
 
-#: appObjects/FlatCAMCNCJob.py:1004
+#: appObjects/FlatCAMCNCJob.py:1009
 msgid "Point is not within the object area. Choose another point."
 msgstr "Nokta, nesne alanı içinde değil. Başka bir nokta seçin."
 
-#: appObjects/FlatCAMCNCJob.py:1024
+#: appObjects/FlatCAMCNCJob.py:1029
 msgid ""
 "Added a Probe Point... Click again to add another or right click to "
 "finish ..."
@@ -13086,117 +13093,117 @@ msgstr ""
 "Bir Prob (algılayıcı) Noktası eklendi ... Başka bir tane eklemek için tekrar "
 "tıklayın veya bitirmek için sağ tıklayın ..."
 
-#: appObjects/FlatCAMCNCJob.py:1046
+#: appObjects/FlatCAMCNCJob.py:1051
 msgid "Finished adding Probe Points..."
 msgstr "Prob (algılayıcı) noktalarının eklenmesi başarıyla tamamlandı ..."
 
-#: appObjects/FlatCAMCNCJob.py:1260
+#: appObjects/FlatCAMCNCJob.py:1265
 msgid "COM list updated ..."
 msgstr "COM listesi güncellendi ..."
 
-#: appObjects/FlatCAMCNCJob.py:1296
+#: appObjects/FlatCAMCNCJob.py:1301
 msgid "Connected"
 msgstr "Bağlandı"
 
-#: appObjects/FlatCAMCNCJob.py:1307
+#: appObjects/FlatCAMCNCJob.py:1312
 msgid "Port connected"
 msgstr "Bağlantı noktasına bağlandı"
 
-#: appObjects/FlatCAMCNCJob.py:1311
+#: appObjects/FlatCAMCNCJob.py:1316
 msgid "Could not connect to GRBL on port"
 msgstr "Bağlantı noktasında GRBL'ye bağlanılamadı"
 
-#: appObjects/FlatCAMCNCJob.py:1328
+#: appObjects/FlatCAMCNCJob.py:1333
 msgid "Port is connected. Disconnecting"
 msgstr "Bağlantı noktasına bağlandı. Bağlantı kesiliyor"
 
-#: appObjects/FlatCAMCNCJob.py:1330
+#: appObjects/FlatCAMCNCJob.py:1335
 msgid "Could not connect to port"
 msgstr "Bağlantı noktasına bağlanılamadı"
 
-#: appObjects/FlatCAMCNCJob.py:1360 appObjects/FlatCAMCNCJob.py:1790
+#: appObjects/FlatCAMCNCJob.py:1365 appObjects/FlatCAMCNCJob.py:1795
 msgid "Sending GCode..."
 msgstr "G-Kod gönderiliyor ..."
 
-#: appObjects/FlatCAMCNCJob.py:1489
+#: appObjects/FlatCAMCNCJob.py:1494
 msgid "GRBL is doing a home cycle."
 msgstr "GRBL bir başlangıç arama döngüsü gerçekleştiriyor."
 
-#: appObjects/FlatCAMCNCJob.py:1495
+#: appObjects/FlatCAMCNCJob.py:1500
 msgid "GRBL software reset was sent."
 msgstr "GRBL yazılım sıfırlaması gönderildi."
 
-#: appObjects/FlatCAMCNCJob.py:1503
+#: appObjects/FlatCAMCNCJob.py:1508
 msgid "GRBL resumed."
 msgstr "GRBL devam etti."
 
-#: appObjects/FlatCAMCNCJob.py:1507
+#: appObjects/FlatCAMCNCJob.py:1512
 msgid "GRBL paused."
 msgstr "GRBL duraklatıldı."
 
-#: appObjects/FlatCAMCNCJob.py:1649 appObjects/FlatCAMCNCJob.py:1839
-#: appObjects/FlatCAMCNCJob.py:1924 appTools/ToolSolderPaste.py:1066
+#: appObjects/FlatCAMCNCJob.py:1654 appObjects/FlatCAMCNCJob.py:1844
+#: appObjects/FlatCAMCNCJob.py:1929 appTools/ToolSolderPaste.py:1066
 msgid "Export cancelled ..."
 msgstr "Dışarı aktarma iptal edildi ..."
 
-#: appObjects/FlatCAMCNCJob.py:1673 appObjects/FlatCAMCNCJob.py:1960
+#: appObjects/FlatCAMCNCJob.py:1678 appObjects/FlatCAMCNCJob.py:1965
 #: appObjects/FlatCAMScript.py:134 app_Main.py:7824
 msgid "Loading..."
 msgstr "Yükleniyor..."
 
-#: appObjects/FlatCAMCNCJob.py:1677
+#: appObjects/FlatCAMCNCJob.py:1682
 msgid "There is nothing to view"
 msgstr "Görüntülenecek hiçbir şey yok"
 
-#: appObjects/FlatCAMCNCJob.py:1683
+#: appObjects/FlatCAMCNCJob.py:1688
 msgid "Code Viewer"
 msgstr "Kod Görüntüleyici"
 
-#: appObjects/FlatCAMCNCJob.py:1721
+#: appObjects/FlatCAMCNCJob.py:1726
 msgid "Loaded Machine Code into Code Viewer"
 msgstr "Makine Kodu Kod Görüntüleyiciye Yüklendi"
 
-#: appObjects/FlatCAMCNCJob.py:1766
+#: appObjects/FlatCAMCNCJob.py:1771
 msgid "Failed to open height map file"
 msgstr "Yükseklik haritası dosyası açılamadı"
 
-#: appObjects/FlatCAMCNCJob.py:1816
+#: appObjects/FlatCAMCNCJob.py:1821
 msgid "Finished probing. Doing the autolevelling."
 msgstr "İnceleme tamamlandı. Otomatik dengeleme yapılıyor."
 
-#: appObjects/FlatCAMCNCJob.py:1821
+#: appObjects/FlatCAMCNCJob.py:1826
 msgid "Sending probing GCode to the GRBL controller."
 msgstr "Denetleyici, G-Kod'unu GRBL kontrol cihazına gönderiyor."
 
-#: appObjects/FlatCAMCNCJob.py:1862
+#: appObjects/FlatCAMCNCJob.py:1867
 msgid "Empty GRBL heightmap."
 msgstr "Boş GRBL yükseklik haritası."
 
-#: appObjects/FlatCAMCNCJob.py:1866
+#: appObjects/FlatCAMCNCJob.py:1871
 msgid "Finished autolevelling."
 msgstr "Otomatik dengeleme tamamlanıyor."
 
-#: appObjects/FlatCAMCNCJob.py:1880
+#: appObjects/FlatCAMCNCJob.py:1885
 msgid "Plotting..."
 msgstr "Çiziliyor..."
 
-#: appObjects/FlatCAMCNCJob.py:1950
+#: appObjects/FlatCAMCNCJob.py:1955
 msgid "File saved to"
 msgstr "Dosya şuraya kaydedildi"
 
-#: appObjects/FlatCAMCNCJob.py:1974
+#: appObjects/FlatCAMCNCJob.py:1979
 msgid "Code Review"
 msgstr "Kod İncelemesi"
 
-#: appObjects/FlatCAMCNCJob.py:2157
+#: appObjects/FlatCAMCNCJob.py:2162
 msgid "This CNCJob object can't be processed because it is a"
 msgstr "Bu CNC iş nesnesi işlenemez çünkü bir"
 
-#: appObjects/FlatCAMCNCJob.py:2159
+#: appObjects/FlatCAMCNCJob.py:2164
 msgid "CNCJob object"
 msgstr "CNC İş nesnesi"
 
-#: appObjects/FlatCAMCNCJob.py:2269
+#: appObjects/FlatCAMCNCJob.py:2274
 msgid ""
 "G-code does not have a G94 code.\n"
 "Append Code snippet will not be used.."
@@ -13258,7 +13265,7 @@ msgstr "Bitiş"
 #: appTools/ToolIsolation.py:531 appTools/ToolIsolation.py:644
 #: appTools/ToolIsolation.py:710 appTools/ToolMilling.py:628
 #: appTools/ToolMilling.py:749 appTools/ToolMilling.py:794
-#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:711
+#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:713
 #: appTools/ToolPaint.py:252 appTools/ToolPaint.py:316
 #: appTools/ToolPaint.py:655
 msgid "Multiple Tools"
@@ -13440,7 +13447,7 @@ msgstr "İşlem tamamlanamadı."
 
 #: appObjects/FlatCAMGerber.py:558 appObjects/FlatCAMGerber.py:632
 #: appTools/ToolIsolation.py:1583 appTools/ToolIsolation.py:1951
-#: appTools/ToolNCC.py:1854 appTools/ToolNCC.py:2819 appTools/ToolNCC.py:3198
+#: appTools/ToolNCC.py:1856 appTools/ToolNCC.py:2879 appTools/ToolNCC.py:3258
 msgid "Isolation geometry could not be generated."
 msgstr "Yalıtım şekli oluşturulamadı."
 
@@ -13850,7 +13857,7 @@ msgstr ""
 #: appTools/ToolEtchCompensation.py:458 appTools/ToolExtractDrills.py:702
 #: appTools/ToolFiducials.py:932 appTools/ToolFilm.py:1383
 #: appTools/ToolInvertGerber.py:286 appTools/ToolIsolation.py:3477
-#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4328
+#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4388
 #: appTools/ToolOptimal.py:593 appTools/ToolPaint.py:3194
 #: appTools/ToolPanelize.py:889 appTools/ToolPunchGerber.py:993
 #: appTools/ToolQRCode.py:904 appTools/ToolRulesCheck.py:1618
@@ -13866,7 +13873,7 @@ msgstr "Verileri Sıfırla"
 #: appTools/ToolEtchCompensation.py:461 appTools/ToolExtractDrills.py:705
 #: appTools/ToolFiducials.py:935 appTools/ToolFilm.py:1386
 #: appTools/ToolInvertGerber.py:289 appTools/ToolIsolation.py:3480
-#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4331
+#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4391
 #: appTools/ToolOptimal.py:596 appTools/ToolPaint.py:3197
 #: appTools/ToolPanelize.py:892 appTools/ToolPunchGerber.py:996
 #: appTools/ToolQRCode.py:907 appTools/ToolRulesCheck.py:1621
@@ -14306,8 +14313,8 @@ msgstr "Bakır dolgu işlemi tamamlandı."
 #: appTools/ToolIsolation.py:908 appTools/ToolIsolation.py:1345
 #: appTools/ToolIsolation.py:1372 appTools/ToolMilling.py:424
 #: appTools/ToolMilling.py:639 appTools/ToolMilling.py:1322
-#: appTools/ToolNCC.py:844 appTools/ToolNCC.py:1306 appTools/ToolNCC.py:1355
-#: appTools/ToolNCC.py:1388 appTools/ToolPaint.py:1086
+#: appTools/ToolNCC.py:846 appTools/ToolNCC.py:1308 appTools/ToolNCC.py:1357
+#: appTools/ToolNCC.py:1390 appTools/ToolPaint.py:1086
 #: appTools/ToolPanelize.py:191 appTools/ToolPanelize.py:205
 #: appTools/ToolSub.py:157 appTools/ToolSub.py:170 appTools/ToolSub.py:359
 #: appTools/ToolSub.py:372 tclCommands/TclCommandCopperClear.py:97
@@ -14338,7 +14345,7 @@ msgstr "Bakır dolgu. Bakır ile doldurmak için kullanılan alanlar hazırlanı
 
 #: appTools/ToolCopperThieving.py:599 appTools/ToolFilm.py:631
 #: appTools/ToolFilm.py:879 appTools/ToolIsolation.py:916
-#: appTools/ToolNCC.py:851 appTools/ToolOptimal.py:145
+#: appTools/ToolNCC.py:853 appTools/ToolOptimal.py:145
 #: appTools/ToolPanelize.py:612 appTools/ToolRulesCheck.py:626
 msgid "Working..."
 msgstr "Çalışıyor..."
@@ -14347,13 +14354,13 @@ msgstr "Çalışıyor..."
 msgid "Geometry not supported for bounding box"
 msgstr "Sınırlayıcı kutu için şekil desteklenmiyor"
 
-#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1679
-#: appTools/ToolNCC.py:1734 appTools/ToolNCC.py:2674 appTools/ToolPaint.py:2457
+#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1681
+#: appTools/ToolNCC.py:1736 appTools/ToolNCC.py:2734 appTools/ToolPaint.py:2457
 msgid "No object available."
 msgstr "Kullanılabilir nesne yok."
 
-#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1704
-#: appTools/ToolNCC.py:1757 appTools/ToolNCC.py:2716
+#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1706
+#: appTools/ToolNCC.py:1759 appTools/ToolNCC.py:2776
 msgid "The reference object type is not supported."
 msgstr "Belirtilen nesnenin türü desteklenmiyor."
 
@@ -14406,7 +14413,7 @@ msgstr ""
 "- 'Nesne' - Belirtilen nesne alanı içinde bakır dolgusu yapar."
 
 #: appTools/ToolCopperThieving.py:1231 appTools/ToolIsolation.py:3385
-#: appTools/ToolNCC.py:4257 appTools/ToolPaint.py:3137
+#: appTools/ToolNCC.py:4317 appTools/ToolPaint.py:3137
 msgid "Ref. Type"
 msgstr "Seçilen Tür"
 
@@ -14419,12 +14426,12 @@ msgstr ""
 "Gerber, Excellon veya Şekil olabilir."
 
 #: appTools/ToolCopperThieving.py:1242 appTools/ToolIsolation.py:3396
-#: appTools/ToolNCC.py:4267 appTools/ToolPaint.py:3147
+#: appTools/ToolNCC.py:4327 appTools/ToolPaint.py:3147
 msgid "Ref. Object"
 msgstr "Nesne Türü"
 
 #: appTools/ToolCopperThieving.py:1244 appTools/ToolIsolation.py:3398
-#: appTools/ToolNCC.py:4269 appTools/ToolPaint.py:3149
+#: appTools/ToolNCC.py:4329 appTools/ToolPaint.py:3149
 msgid "The FlatCAM object to be used as non copper clearing reference."
 msgstr "Bakır temizlemeye şablon olarak kullanılacak FlatCAM nesnesi."
 
@@ -14557,7 +14564,7 @@ msgstr "Seçilen Gerber dosyasına köşe işaretleyicileri ekler."
 
 #: appTools/ToolCutOut.py:281 appTools/ToolIsolation.py:791
 #: appTools/ToolIsolation.py:1049 appTools/ToolIsolation.py:1185
-#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:990 appTools/ToolNCC.py:1128
+#: appTools/ToolNCC.py:463 appTools/ToolNCC.py:992 appTools/ToolNCC.py:1130
 #: appTools/ToolPaint.py:395 appTools/ToolPaint.py:686
 #: appTools/ToolPaint.py:823 appTools/ToolSolderPaste.py:131
 #: appTools/ToolSolderPaste.py:464 app_Main.py:4490
@@ -14565,12 +14572,12 @@ msgid "Please enter a tool diameter with non-zero value, in Float format."
 msgstr "Lütfen ondalıklı formatta sıfır olmayan bir uç kalınlığı girin."
 
 #: appTools/ToolCutOut.py:357 appTools/ToolIsolation.py:1130
-#: appTools/ToolNCC.py:1073 appTools/ToolPaint.py:767
+#: appTools/ToolNCC.py:1075 appTools/ToolPaint.py:767
 msgid "Tool not in Tools Database. Adding a default tool."
 msgstr "Uç, Araçlar Veri Tabanında yoktur. Varsayılan bir uç ekleniyor."
 
 #: appTools/ToolCutOut.py:364 appTools/ToolDrilling.py:955
-#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1080
+#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1082
 #: appTools/ToolPaint.py:775
 msgid ""
 "Cancelled.\n"
@@ -14588,7 +14595,7 @@ msgid "Default tool added."
 msgstr "Varsayılan uç eklendi."
 
 #: appTools/ToolCutOut.py:466 appTools/ToolIsolation.py:2577
-#: appTools/ToolNCC.py:3649 appTools/ToolPaint.py:2620
+#: appTools/ToolNCC.py:3709 appTools/ToolPaint.py:2620
 msgid "Selected tool can't be used here. Pick another."
 msgstr "Seçilen uç burada kullanılamaz. Başka bir uç seçerek tekrar deneyin."
 
@@ -14637,7 +14644,7 @@ msgstr "Serbest şekilli PCB kesme işlemi başarıyla tamamlandı."
 #: appTools/ToolEtchCompensation.py:158 appTools/ToolInvertGerber.py:105
 #: appTools/ToolIsolation.py:912 appTools/ToolIsolation.py:1349
 #: appTools/ToolIsolation.py:1376 appTools/ToolMilling.py:1326
-#: appTools/ToolNCC.py:848 appTools/ToolNCC.py:1310 appTools/ToolPaint.py:1003
+#: appTools/ToolNCC.py:850 appTools/ToolNCC.py:1312 appTools/ToolPaint.py:1003
 #: appTools/ToolPanelize.py:196 tclCommands/TclCommandBbox.py:71
 #: tclCommands/TclCommandNregions.py:71
 msgid "Object not found"
@@ -14735,7 +14742,7 @@ msgstr ""
 "nesne türlerini belirler."
 
 #: appTools/ToolCutOut.py:2074 appTools/ToolIsolation.py:3125
-#: appTools/ToolNCC.py:3939 appTools/ToolPaint.py:2901
+#: appTools/ToolNCC.py:3999 appTools/ToolPaint.py:2901
 msgid ""
 "Add a new tool to the Tool Table\n"
 "with the diameter specified above.\n"
@@ -15971,7 +15978,7 @@ msgstr "Yeni Uç"
 msgid "Adding Tool cancelled"
 msgstr "Uç ekleme işlemi iptal edildi"
 
-#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:879
+#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:881
 #: appTools/ToolOptimal.py:179
 msgid ""
 "The Gerber object has one Polygon as geometry.\n"
@@ -15980,13 +15987,13 @@ msgstr ""
 "Gerber nesnesi şekil olarak tek parçadan oluşmaktadır.\n"
 "Bu tek parça arasında bulunabilecek bir mesafe yoktur."
 
-#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:924
+#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:926
 msgid "Optimal tool diameter found"
 msgstr "En uygun uç kalınlığı bulundu"
 
 #: appTools/ToolIsolation.py:1000 appTools/ToolIsolation.py:1508
 #: appTools/ToolIsolation.py:1710 appTools/ToolIsolation.py:1897
-#: appTools/ToolNCC.py:935 appTools/ToolNCC.py:1343 appTools/ToolPaint.py:1031
+#: appTools/ToolNCC.py:937 appTools/ToolNCC.py:1345 appTools/ToolPaint.py:1031
 #: appTools/ToolPaint.py:1744
 msgid "There are no tools selected in the Tool Table."
 msgstr "Araç Tablosunda seçili hiçbir uç yok."
@@ -15998,40 +16005,40 @@ msgstr "Eksik yalıtım. En az bir uç tam bir yalıtım yapamadı."
 
 #: appTools/ToolIsolation.py:1057 appTools/ToolIsolation.py:1144
 #: appTools/ToolIsolation.py:1206 appTools/ToolIsolation.py:2626
-#: appTools/ToolNCC.py:999 appTools/ToolNCC.py:1087 appTools/ToolNCC.py:1149
-#: appTools/ToolNCC.py:3698 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
+#: appTools/ToolNCC.py:1001 appTools/ToolNCC.py:1089 appTools/ToolNCC.py:1151
+#: appTools/ToolNCC.py:3758 appTools/ToolPaint.py:694 appTools/ToolPaint.py:782
 #: appTools/ToolPaint.py:844 appTools/ToolPaint.py:2676
 #: appTools/ToolSolderPaste.py:488
 msgid "Cancelled. Tool already in Tool Table."
 msgstr "Uç ekleme işlemi iptal edildi. Uç zaten Araçlar Tablosunda var."
 
-#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1115
+#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1117
 #: appTools/ToolPaint.py:810
 msgid "New tool added to Tool Table from Tools Database."
 msgstr "Araçlar Veri Tabanından Araçlar Tablosuna yeni uç eklendi."
 
-#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1179
+#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1181
 #: appTools/ToolPaint.py:873
 msgid "Default tool added to Tool Table."
 msgstr "Varsayılan uç eklendi."
 
-#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1205
+#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1207
 #: appTools/ToolPaint.py:898
 msgid "Tool from Tool Table was edited."
 msgstr "Araçlar Tablosundaki uç düzenlendi."
 
-#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1218
+#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1220
 #: appTools/ToolPaint.py:911 appTools/ToolSolderPaste.py:548
 msgid "Cancelled. New diameter value is already in the Tool Table."
 msgstr ""
 "Düzenleme iptal edildi. Yeni kalınlık değeri Araçlar Tablosunda zaten var."
 
-#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1269
+#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1271
 #: appTools/ToolPaint.py:961
 msgid "Delete failed. Select a tool to delete."
 msgstr "Silme işlemi başarısız oldu. Silmek için bir uç seçin."
 
-#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1275
+#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1277
 #: appTools/ToolPaint.py:967
 msgid "Tool(s) deleted from Tool Table."
 msgstr "Uç(lar) Araçlar Tablosundan silindi."
@@ -16123,12 +16130,12 @@ msgstr "Seçimde çokgen yok."
 msgid "Click the end point of the paint area."
 msgstr "Çizim alanının bitiş noktasını tıklayın."
 
-#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3662
+#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3722
 #: appTools/ToolPaint.py:2633 app_Main.py:5773 app_Main.py:5783
 msgid "Tool from DB added in Tool Table."
 msgstr "Araçlar Tablosuna Araçlar Veri Tabanından bir uç eklendi."
 
-#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3715
+#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3775
 #: appTools/ToolPaint.py:2693
 msgid "New tool added to Tool Table."
 msgstr "Araçlar Tablosuna yeni uç eklendi."
@@ -16137,7 +16144,7 @@ msgstr "Araçlar Tablosuna yeni uç eklendi."
 msgid "Gerber object for isolation routing."
 msgstr "Yalıtım oluşturmak için Gerber nesnesi."
 
-#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3815
+#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3875
 msgid ""
 "Tools pool from which the algorithm\n"
 "will pick the ones used for copper clearing."
@@ -16162,7 +16169,7 @@ msgstr ""
 "Bunun nedeni, bazı uçlarla bu işlevin çizim şekli\n"
 "oluşturamayacağıdır."
 
-#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3839
+#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3899
 msgid ""
 "Tool Diameter. It's value (in current FlatCAM units)\n"
 "is the cut width into the material."
@@ -16170,7 +16177,7 @@ msgstr ""
 "Bu uç kalınlığıdır. Değeri (mevcut FlatCAM birimlerinde) \n"
 "malzemenin kesim genişliğidir."
 
-#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3843
+#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3903
 msgid ""
 "The Tool Type (TT) can be:\n"
 "- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
@@ -16200,11 +16207,11 @@ msgstr ""
 "sütundaki değere eşit olacaktır. <BR> <B>V-Şekli</B>-> V-Şekil Uç Tipini "
 "seçtiğinizde çalışma tipini otomatik olarak Yalıtım olarak seçecektir."
 
-#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3923
+#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3983
 msgid "Optimal"
 msgstr "En Uygun Uç"
 
-#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3927
+#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3987
 msgid ""
 "Find a tool diameter that is guaranteed\n"
 "to do a complete isolation."
@@ -16212,7 +16219,7 @@ msgstr ""
 "Tam bir yalıtım yapmak için en\n"
 "uygun uç kalınlığını bulun."
 
-#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:3967
+#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:4027
 #: appTools/ToolPaint.py:2929 appTools/ToolSolderPaste.py:1211
 msgid ""
 "Delete a selection of tools in the Tool Table\n"
@@ -16237,7 +16244,7 @@ msgstr ""
 msgid "Object whose area will be removed from isolation geometry."
 msgstr "Alanı, oluşturulacak yalıtım şekliyle ayrılacak nesne."
 
-#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4259
+#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4319
 msgid ""
 "The type of FlatCAM object to be used as non copper clearing reference.\n"
 "It can be Gerber, Excellon or Geometry."
@@ -16312,110 +16319,110 @@ msgstr "Hiçbir nesne seçilmedi."
 msgid "Error when mouse left click."
 msgstr "Sol tıklandığında hata oluştu."
 
-#: appTools/ToolNCC.py:835
+#: appTools/ToolNCC.py:837
 msgid "NCC Tool. Checking tools for validity."
 msgstr "Bakır Temizleme. Uçların uygunluğu kontrol ediliyor."
 
-#: appTools/ToolNCC.py:947
+#: appTools/ToolNCC.py:949
 msgid ""
 "Incomplete isolation. None of the selected tools could do a complete "
 "isolation."
 msgstr "Eksik yalıtım. Seçilen uçların hiçbiri tam bir yalıtım sağlayamadı."
 
-#: appTools/ToolNCC.py:950
+#: appTools/ToolNCC.py:952
 msgid "At least one of the selected tools can do a complete isolation."
 msgstr "Seçilen uçlardan en az biri tam bir yalıtım yapabilir."
 
-#: appTools/ToolNCC.py:1722 appTools/ToolNCC.py:2646
+#: appTools/ToolNCC.py:1724 appTools/ToolNCC.py:2706
 msgid "NCC Tool. Preparing non-copper polygons."
 msgstr "Bakır Temizleme. Yollar dışında kalan bakır alanlar hazırlanıyor."
 
-#: appTools/ToolNCC.py:1782 appTools/ToolNCC.py:2774
+#: appTools/ToolNCC.py:1784 appTools/ToolNCC.py:2834
 msgid "NCC Tool. Calculate 'empty' area."
 msgstr "Bakır Temizleme. 'Boş' alanın hesaplanması."
 
-#: appTools/ToolNCC.py:1793 appTools/ToolNCC.py:1822 appTools/ToolNCC.py:1928
-#: appTools/ToolNCC.py:1941 appTools/ToolNCC.py:2787 appTools/ToolNCC.py:2892
-#: appTools/ToolNCC.py:2907 appTools/ToolNCC.py:3173 appTools/ToolNCC.py:3274
-#: appTools/ToolNCC.py:3289
+#: appTools/ToolNCC.py:1795 appTools/ToolNCC.py:1824 appTools/ToolNCC.py:1930
+#: appTools/ToolNCC.py:1943 appTools/ToolNCC.py:2847 appTools/ToolNCC.py:2952
+#: appTools/ToolNCC.py:2967 appTools/ToolNCC.py:3233 appTools/ToolNCC.py:3334
+#: appTools/ToolNCC.py:3349
 msgid "Buffering finished"
 msgstr "Tamponlama işlemi tamamlandı"
 
-#: appTools/ToolNCC.py:1797 appTools/ToolNCC.py:1826 appTools/ToolNCC.py:1932
-#: appTools/ToolNCC.py:1944 appTools/ToolNCC.py:2795 appTools/ToolNCC.py:2914
-#: appTools/ToolNCC.py:3180 appTools/ToolNCC.py:3296
+#: appTools/ToolNCC.py:1799 appTools/ToolNCC.py:1828 appTools/ToolNCC.py:1934
+#: appTools/ToolNCC.py:1946 appTools/ToolNCC.py:2855 appTools/ToolNCC.py:2974
+#: appTools/ToolNCC.py:3240 appTools/ToolNCC.py:3356
 msgid "Could not get the extent of the area to be non copper cleared."
 msgstr "Bakır temizleme yapılacak alanının kapsamı alınamadı."
 
-#: appTools/ToolNCC.py:1805 appTools/ToolNCC.py:1955 appTools/ToolNCC.py:2925
+#: appTools/ToolNCC.py:1807 appTools/ToolNCC.py:1957 appTools/ToolNCC.py:2985
 msgid "NCC Tool. Finished calculation of 'empty' area."
 msgstr "Bakır Temizleme. 'Boş' alanın hesaplanması tamamlandı."
 
-#: appTools/ToolNCC.py:1858 appTools/ToolNCC.py:2822 appTools/ToolNCC.py:2899
-#: appTools/ToolNCC.py:3200 appTools/ToolNCC.py:3281
+#: appTools/ToolNCC.py:1860 appTools/ToolNCC.py:2882 appTools/ToolNCC.py:2959
+#: appTools/ToolNCC.py:3260 appTools/ToolNCC.py:3341
 msgid ""
 "Isolation geometry is broken. Margin is less than isolation tool diameter."
 msgstr ""
 "Yalıtım şekli bozuk. Pay, yalıtım için kullanılan uç kalınlığından daha "
 "küçük."
 
-#: appTools/ToolNCC.py:1948 appTools/ToolNCC.py:2918 appTools/ToolNCC.py:3299
+#: appTools/ToolNCC.py:1950 appTools/ToolNCC.py:2978 appTools/ToolNCC.py:3359
 msgid "The selected object is not suitable for copper clearing."
 msgstr "Seçilen nesne bakır temizleme için uygun değildir."
 
-#: appTools/ToolNCC.py:1998
+#: appTools/ToolNCC.py:2000
 msgid "Clearing the polygon with the method: lines."
 msgstr "Çokgen temizleme yöntemi: Çizgi Bazlı."
 
-#: appTools/ToolNCC.py:2008
+#: appTools/ToolNCC.py:2010
 msgid "Failed. Clearing the polygon with the method: seed."
 msgstr "Hata. Çokgen temizleme yöntemi: Nokta Bazlı."
 
-#: appTools/ToolNCC.py:2017
+#: appTools/ToolNCC.py:2019
 msgid "Failed. Clearing the polygon with the method: standard."
 msgstr "Hata. Çokgen temizleme yöntemi: Standart."
 
-#: appTools/ToolNCC.py:2033
+#: appTools/ToolNCC.py:2035
 msgid "Polygon could not be cleared. Location:"
 msgstr "Çokgen temizlenemedi. Yer:"
 
-#: appTools/ToolNCC.py:2065 appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2595
-#: appTools/ToolNCC.py:2597
+#: appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2069 appTools/ToolNCC.py:2655
+#: appTools/ToolNCC.py:2657
 msgid "Non-Copper clearing ..."
 msgstr "Bakır Temizleniyor ..."
 
-#: appTools/ToolNCC.py:2086
+#: appTools/ToolNCC.py:2088
 msgid ""
 "There is no copper clearing tool in the selection and at least one is needed."
 msgstr ""
 "Seçimde bakır temizleme aracı yoktur ve en az bir araca ihtiyaç vardır."
 
-#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2742
+#: appTools/ToolNCC.py:2103 appTools/ToolNCC.py:2802
 msgid ""
 "NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
 msgstr ""
 "Bakır Temizleme. Yollar dışında kalan bakır alanlar hazır. Normal bakır "
 "temizleme işlemi başlatıldı."
 
-#: appTools/ToolNCC.py:2129 appTools/ToolNCC.py:2363
+#: appTools/ToolNCC.py:2131 appTools/ToolNCC.py:2365
 msgid "NCC Tool failed creating bounding box."
 msgstr "Bakır temizleme aracı sınırlayıcı kutu oluşturamadı."
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "NCC Tool clearing with tool diameter"
 msgstr "Bakır temizliği"
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "started."
 msgstr "kalınlıkta bir uçla başlatıldı."
 
-#: appTools/ToolNCC.py:2277
+#: appTools/ToolNCC.py:2279
 msgid "Could not use the tool for copper clear."
 msgstr "Bu uç, bakır temizleme işlemi için kullanılamadı."
 
-#: appTools/ToolNCC.py:2299 appTools/ToolNCC.py:3099
+#: appTools/ToolNCC.py:2301 appTools/ToolNCC.py:3159
 msgid ""
 "There is no NCC Geometry in the file.\n"
 "Usually it means that the tool diameter is too big for the painted "
@@ -16426,28 +16433,28 @@ msgstr ""
 "Genellikle uç kalınlığının çizim şekli için çok büyük olduğu anlamına gelir. "
 "Çizim seçeneklerini değiştirin ve tekrar deneyin."
 
-#: appTools/ToolNCC.py:2309 appTools/ToolNCC.py:3108
+#: appTools/ToolNCC.py:2311 appTools/ToolNCC.py:3168
 msgid "NCC Tool clear all done."
 msgstr "Bakır temizleme işlemi başarıyla tamamlandı."
 
-#: appTools/ToolNCC.py:2312 appTools/ToolNCC.py:3111
+#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:3171
 msgid "NCC Tool clear all done but the copper features isolation is broken for"
 msgstr "Bakırın temizlenmesi tamamlandı, ancak yollarda kırılmalar oldu"
 
-#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:2510 appTools/ToolNCC.py:3113
-#: appTools/ToolNCC.py:3496
+#: appTools/ToolNCC.py:2316 appTools/ToolNCC.py:2570 appTools/ToolNCC.py:3173
+#: appTools/ToolNCC.py:3556
 msgid "tools"
 msgstr "araçlar"
 
-#: appTools/ToolNCC.py:2341
+#: appTools/ToolNCC.py:2343
 msgid "NCC Tool. Rest machining copper clearing task started."
 msgstr "Bakır temizleme \"Kalan İşleme\" yöntemiyle başlatılmıştır."
 
-#: appTools/ToolNCC.py:2506 appTools/ToolNCC.py:3492
+#: appTools/ToolNCC.py:2566 appTools/ToolNCC.py:3552
 msgid "NCC Tool Rest Machining clear all done."
 msgstr "Bakır temizleme \"Kalan İşleme\" ile tamamlanmıştır."
 
-#: appTools/ToolNCC.py:2509 appTools/ToolNCC.py:3495
+#: appTools/ToolNCC.py:2569 appTools/ToolNCC.py:3555
 msgid ""
 "NCC Tool Rest Machining clear all done but the copper features isolation is "
 "broken for"
@@ -16455,11 +16462,11 @@ msgstr ""
 "Bakır temizleme \"Kalan İşleme\" ile tamamlandı; ancak yollarda kırılmalar "
 "oldu"
 
-#: appTools/ToolNCC.py:2607
+#: appTools/ToolNCC.py:2667
 msgid "NCC Tool started. Reading parameters."
 msgstr "Bakır temizleme başlatıldı. Seçenekler okunuyor."
 
-#: appTools/ToolNCC.py:3594
+#: appTools/ToolNCC.py:3654
 msgid ""
 "Try to use the Buffering Type = Full in Preferences -> Gerber General. "
 "Reload the Gerber file after this change."
@@ -16468,15 +16475,15 @@ msgstr ""
 "Seçenekleri'nden \"Tam\" olarak kullanmayı deneyin. Bu değişikliği yaptıktan "
 "sonra Gerber dosyasını yeniden yükleyin."
 
-#: appTools/ToolNCC.py:3750
+#: appTools/ToolNCC.py:3810
 msgid "Non-Copper Clearing"
 msgstr "Bakır Temizleme"
 
-#: appTools/ToolNCC.py:3779 appTools/ToolPaint.py:2765
+#: appTools/ToolNCC.py:3839 appTools/ToolPaint.py:2765
 msgid "Obj Type"
 msgstr "Nesne Türü"
 
-#: appTools/ToolNCC.py:3781
+#: appTools/ToolNCC.py:3841
 msgid ""
 "Specify the type of object to be cleared of excess copper.\n"
 "It can be of type: Gerber or Geometry.\n"
@@ -16487,11 +16494,11 @@ msgstr ""
 "Bu türler olabilir: Gerber veya Geometri.\n"
 "Burada seçilen, 'Nesne' açılır kutudaki nesne türlerini belirler."
 
-#: appTools/ToolNCC.py:3803
+#: appTools/ToolNCC.py:3863
 msgid "Object to be cleared of excess copper."
 msgstr "Bakır temizliği yapılacak nesne."
 
-#: appTools/ToolNCC.py:3831
+#: appTools/ToolNCC.py:3891
 msgid ""
 "This is the Tool Number.\n"
 "Non copper clearing will start with the tool with the biggest \n"
@@ -17574,6 +17581,12 @@ msgstr "Metni silin."
 msgid "...processing..."
 msgstr "...işleniyor..."
 
+#: appTools/ToolShell.py:293
+#, fuzzy
+#| msgid "FlatCAM Beta"
+msgid "FlatCAM Shell"
+msgstr "FlatCAM Beta"
+
 #: appTools/ToolSolderPaste.py:459
 msgid "Please enter a tool diameter to add, in Float format."
 msgstr "Lütfen eklemek için bir uç kalınlığını ondalıklı biçiminde girin."
@@ -18158,6 +18171,10 @@ msgstr ""
 "Çoklu şekillerde, şekli aynı anda düzenlemek mümkün değildir.\n"
 "Bir kerede yalnızca bir şekli düzenleyin."
 
+#: app_Main.py:2261
+msgid "EDITOR Area"
+msgstr ""
+
 #: app_Main.py:2263
 msgid "Editor is activated ..."
 msgstr "Düzenleyici etkinleştirildi ..."
diff --git a/locale_template/strings.pot b/locale_template/strings.pot
index e54f99ce..04114286 100644
--- a/locale_template/strings.pot
+++ b/locale_template/strings.pot
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
-"POT-Creation-Date: 2020-10-22 15:07+0300\n"
+"POT-Creation-Date: 2020-10-22 22:01+0300\n"
 "PO-Revision-Date: 2019-03-25 15:08+0200\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -103,7 +103,7 @@ msgstr ""
 #: Bookmark.py:300 Bookmark.py:342 appDatabase.py:665 appDatabase.py:711 appDatabase.py:2998
 #: appDatabase.py:3044 appEditors/AppExcEditor.py:1023 appEditors/AppExcEditor.py:1091
 #: appEditors/AppTextEditor.py:263 appGUI/MainGUI.py:2878 appGUI/MainGUI.py:3100
-#: appGUI/MainGUI.py:3315 appObjects/FlatCAMCNCJob.py:1745
+#: appGUI/MainGUI.py:3315 appObjects/FlatCAMCNCJob.py:1750
 #: appObjects/ObjectCollection.py:126 appTools/ToolFilm.py:238 appTools/ToolFilm.py:384
 #: appTools/ToolImage.py:112 appTools/ToolMove.py:269 appTools/ToolPcbWizard.py:189
 #: appTools/ToolPcbWizard.py:212 appTools/ToolQRCode.py:526 appTools/ToolQRCode.py:573
@@ -117,8 +117,8 @@ msgid "Cancelled."
 msgstr ""
 
 #: Bookmark.py:308 appDatabase.py:673 appDatabase.py:3006 appEditors/AppTextEditor.py:318
-#: appObjects/FlatCAMCNCJob.py:1667 appObjects/FlatCAMCNCJob.py:1857
-#: appObjects/FlatCAMCNCJob.py:2306 appTools/ToolFilm.py:582 appTools/ToolFilm.py:830
+#: appObjects/FlatCAMCNCJob.py:1672 appObjects/FlatCAMCNCJob.py:1862
+#: appObjects/FlatCAMCNCJob.py:2311 appTools/ToolFilm.py:582 appTools/ToolFilm.py:830
 #: appTools/ToolSolderPaste.py:1097 app_Main.py:2666 app_Main.py:8451 app_Main.py:8499
 #: app_Main.py:8628 app_Main.py:8765 app_Main.py:8833
 msgid ""
@@ -151,22 +151,22 @@ msgid "The user requested a graceful exit of the current task."
 msgstr ""
 
 #: appCommon/Common.py:292 appTools/ToolCopperThieving.py:328 appTools/ToolIsolation.py:1436
-#: appTools/ToolNCC.py:1364
+#: appTools/ToolNCC.py:1366
 msgid "Click the start point of the area."
 msgstr ""
 
-#: appCommon/Common.py:351 appTools/ToolNCC.py:1423 appTools/ToolPaint.py:1210
+#: appCommon/Common.py:351 appTools/ToolNCC.py:1425 appTools/ToolPaint.py:1210
 msgid "Click the end point of the area."
 msgstr ""
 
 #: appCommon/Common.py:357 appCommon/Common.py:459 appTools/ToolCopperThieving.py:385
-#: appTools/ToolIsolation.py:2348 appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1429
-#: appTools/ToolNCC.py:1481 appTools/ToolPaint.py:1216 appTools/ToolPaint.py:1267
+#: appTools/ToolIsolation.py:2348 appTools/ToolIsolation.py:2400 appTools/ToolNCC.py:1431
+#: appTools/ToolNCC.py:1483 appTools/ToolPaint.py:1216 appTools/ToolPaint.py:1267
 msgid "Zone added. Click to start adding next zone or right click to finish."
 msgstr ""
 
 #: appCommon/Common.py:404 appEditors/AppGeoEditor.py:2352 appTools/ToolIsolation.py:2371
-#: appTools/ToolNCC.py:1452 appTools/ToolPaint.py:1238
+#: appTools/ToolNCC.py:1454 appTools/ToolPaint.py:1238
 msgid "Click on next Point or click right mouse button to complete ..."
 msgstr ""
 
@@ -261,7 +261,7 @@ msgstr ""
 #: appDatabase.py:161 appDatabase.py:837 appEditors/AppExcEditor.py:3765
 #: appGUI/ObjectUI.py:1082 appGUI/ObjectUI.py:1650
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:130 appTools/ToolCutOut.py:2060
-#: appTools/ToolIsolation.py:3091 appTools/ToolNCC.py:3906 appTools/ToolNCC.py:3917
+#: appTools/ToolIsolation.py:3091 appTools/ToolNCC.py:3966 appTools/ToolNCC.py:3977
 #: appTools/ToolPaint.py:2882
 msgid "Tool Dia"
 msgstr ""
@@ -584,14 +584,14 @@ msgstr ""
 
 #: appDatabase.py:307 appDatabase.py:684 appDatabase.py:718 appDatabase.py:2647
 #: appDatabase.py:3017 appDatabase.py:3051 appTools/ToolCutOut.py:294
-#: appTools/ToolDrilling.py:895 appTools/ToolIsolation.py:1067 appTools/ToolNCC.py:1009
+#: appTools/ToolDrilling.py:895 appTools/ToolIsolation.py:1067 appTools/ToolNCC.py:1011
 #: appTools/ToolPaint.py:704
 msgid "Could not load Tools DB file."
 msgstr ""
 
 #: appDatabase.py:315 appDatabase.py:726 appDatabase.py:2655 appDatabase.py:3059
 #: appTools/ToolCutOut.py:305 appTools/ToolDrilling.py:903 appTools/ToolIsolation.py:1078
-#: appTools/ToolNCC.py:1020 appTools/ToolPaint.py:715
+#: appTools/ToolNCC.py:1022 appTools/ToolPaint.py:715
 msgid "Failed to parse Tools DB file."
 msgstr ""
 
@@ -646,8 +646,8 @@ msgstr ""
 
 #: appDatabase.py:740 appDatabase.py:915 appDatabase.py:3073 appDatabase.py:3464
 #: appObjects/FlatCAMGeometry.py:1089 appTools/ToolCutOut.py:484 appTools/ToolCutOut.py:525
-#: appTools/ToolIsolation.py:2583 appTools/ToolIsolation.py:2667 appTools/ToolNCC.py:3655
-#: appTools/ToolNCC.py:3735 appTools/ToolPaint.py:2626 appTools/ToolPaint.py:2715
+#: appTools/ToolIsolation.py:2583 appTools/ToolIsolation.py:2667 appTools/ToolNCC.py:3715
+#: appTools/ToolNCC.py:3795 appTools/ToolPaint.py:2626 appTools/ToolPaint.py:2715
 #: app_Main.py:5676 app_Main.py:5718 app_Main.py:5749 app_Main.py:5769 app_Main.py:5779
 msgid "Tools Database"
 msgstr ""
@@ -694,7 +694,7 @@ msgstr ""
 
 #: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
 #: appGUI/ObjectUI.py:570 appGUI/ObjectUI.py:894 appGUI/ObjectUI.py:1876
-#: appGUI/ObjectUI.py:2681 appGUI/ObjectUI.py:2748 appTools/ToolCalibration.py:929
+#: appGUI/ObjectUI.py:2693 appGUI/ObjectUI.py:2760 appTools/ToolCalibration.py:929
 #: appTools/ToolFiducials.py:681
 msgid "Name"
 msgstr ""
@@ -705,7 +705,7 @@ msgstr ""
 #: appObjects/FlatCAMObj.py:782 appTools/ToolDrilling.py:1762 appTools/ToolDrilling.py:1827
 #: appTools/ToolDrilling.py:2065 appTools/ToolIsolation.py:3022 appTools/ToolMilling.py:1071
 #: appTools/ToolMilling.py:1175 appTools/ToolMilling.py:1360 appTools/ToolMilling.py:1670
-#: appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813 appTools/ToolPcbWizard.py:404
+#: appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813 appTools/ToolPcbWizard.py:404
 #: appTools/ToolProperties.py:417 appTools/ToolProperties.py:480
 #: appTools/ToolSolderPaste.py:1166 tclCommands/TclCommandDrillcncjob.py:195
 msgid "Diameter"
@@ -739,7 +739,7 @@ msgstr ""
 
 #: appDatabase.py:1186 appDatabase.py:1504
 #: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46 appTools/ToolMilling.py:1738
-#: appTools/ToolNCC.py:3990
+#: appTools/ToolNCC.py:4050
 msgid "Operation"
 msgstr ""
 
@@ -763,7 +763,7 @@ msgid "Drilling"
 msgstr ""
 
 #: appDatabase.py:1192 appDatabase.py:1514 appDatabase.py:2761 appDatabase.py:3095
-#: appTools/ToolIsolation.py:1101 appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4000
+#: appTools/ToolIsolation.py:1101 appTools/ToolIsolation.py:2576 appTools/ToolNCC.py:4060
 msgid "Isolation"
 msgstr ""
 
@@ -773,8 +773,8 @@ msgstr ""
 msgid "Paint"
 msgstr ""
 
-#: appDatabase.py:1192 appDatabase.py:2773 appDatabase.py:3111 appTools/ToolNCC.py:1044
-#: appTools/ToolNCC.py:3648
+#: appDatabase.py:1192 appDatabase.py:2773 appDatabase.py:3111 appTools/ToolNCC.py:1046
+#: appTools/ToolNCC.py:3708
 msgid "NCC"
 msgstr ""
 
@@ -788,7 +788,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:303
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:284 appTools/ToolIsolation.py:3425
-#: appTools/ToolNCC.py:4283 appTools/ToolPaint.py:3163
+#: appTools/ToolNCC.py:4343 appTools/ToolPaint.py:3163
 msgid "Shape"
 msgstr ""
 
@@ -819,7 +819,7 @@ msgid ""
 "The speed on Z plane."
 msgstr ""
 
-#: appDatabase.py:1506 appTools/ToolNCC.py:3992
+#: appDatabase.py:1506 appTools/ToolNCC.py:4052
 msgid ""
 "The 'Operation' can be:\n"
 "- Isolation -> will ensure that the non-copper clearing is always complete.\n"
@@ -828,7 +828,7 @@ msgid ""
 msgstr ""
 
 #: appDatabase.py:1513 appEditors/AppGerberEditor.py:2749 appGUI/GUIElements.py:3021
-#: appTools/ToolNCC.py:3999
+#: appTools/ToolNCC.py:4059
 msgid "Clear"
 msgstr ""
 
@@ -837,7 +837,7 @@ msgstr ""
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:56
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137 appTools/ToolIsolation.py:3204
-#: appTools/ToolMilling.py:1760 appTools/ToolNCC.py:4008
+#: appTools/ToolMilling.py:1760 appTools/ToolNCC.py:4068
 msgid "Milling Type"
 msgstr ""
 
@@ -846,7 +846,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:192
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147 appTools/ToolIsolation.py:3206
-#: appTools/ToolIsolation.py:3214 appTools/ToolNCC.py:4010 appTools/ToolNCC.py:4018
+#: appTools/ToolIsolation.py:3214 appTools/ToolNCC.py:4070 appTools/ToolNCC.py:4078
 msgid ""
 "Milling type when the selected tool is of type: 'iso_op':\n"
 "- climb / best for precision milling and to reduce tool usage\n"
@@ -857,7 +857,7 @@ msgstr ""
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144 appTools/ToolIsolation.py:3211
-#: appTools/ToolNCC.py:4015
+#: appTools/ToolNCC.py:4075
 msgid "Climb"
 msgstr ""
 
@@ -865,7 +865,7 @@ msgstr ""
 #: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:190
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145 appTools/ToolIsolation.py:3212
-#: appTools/ToolNCC.py:4016
+#: appTools/ToolNCC.py:4076
 msgid "Conventional"
 msgstr ""
 
@@ -875,12 +875,12 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:167
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:161 appTools/ToolDrilling.py:2312
-#: appTools/ToolIsolation.py:3189 appTools/ToolNCC.py:4031 appTools/ToolPaint.py:2955
+#: appTools/ToolIsolation.py:3189 appTools/ToolNCC.py:4091 appTools/ToolPaint.py:2955
 msgid "Overlap"
 msgstr ""
 
 #: appDatabase.py:1544 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
-#: appTools/ToolNCC.py:4033
+#: appTools/ToolNCC.py:4093
 msgid ""
 "How much (percentage) of the tool width to overlap each tool pass.\n"
 "Adjust the value starting with lower values\n"
@@ -904,7 +904,7 @@ msgstr ""
 #: appTools/ToolCopperThieving.py:1455 appTools/ToolCorners.py:411
 #: appTools/ToolCutOut.py:2157 appTools/ToolFiducials.py:786
 #: appTools/ToolInvertGerber.py:234 appTools/ToolInvertGerber.py:242
-#: appTools/ToolNCC.py:4075 appTools/ToolNCC.py:4178
+#: appTools/ToolNCC.py:4135 appTools/ToolNCC.py:4238
 msgid "Margin"
 msgstr ""
 
@@ -913,24 +913,24 @@ msgstr ""
 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:125
 #: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204 appTools/ToolCopperThieving.py:1206
-#: appTools/ToolCorners.py:413 appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4077
-#: appTools/ToolNCC.py:4180
+#: appTools/ToolCorners.py:413 appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4137
+#: appTools/ToolNCC.py:4240
 msgid "Bounding box margin."
 msgstr ""
 
 #: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
-#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2172
+#: appGUI/ObjectUI.py:1692 appGUI/ObjectUI.py:2184
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
 #: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
 #: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:196 appTools/ToolExtractDrills.py:520
-#: appTools/ToolNCC.py:4052 appTools/ToolPaint.py:2991 appTools/ToolPunchGerber.py:793
+#: appTools/ToolNCC.py:4112 appTools/ToolPaint.py:2991 appTools/ToolPunchGerber.py:793
 msgid "Method"
 msgstr ""
 
 #: appDatabase.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
-#: appTools/ToolNCC.py:4054
+#: appTools/ToolNCC.py:4114
 msgid ""
 "Algorithm for copper clearing:\n"
 "- Standard: Fixed step inwards.\n"
@@ -940,8 +940,8 @@ msgstr ""
 
 #: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
 #: appGUI/ObjectUI.py:1702 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
-#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215 appTools/ToolNCC.py:1963
-#: appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1456 appTools/ToolPaint.py:3016
+#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215 appTools/ToolNCC.py:1965
+#: appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1456 appTools/ToolPaint.py:3016
 #: defaults.py:346 tclCommands/TclCommandCopperClear.py:126
 #: tclCommands/TclCommandCopperClear.py:134 tclCommands/TclCommandPaint.py:125
 msgid "Standard"
@@ -950,8 +950,8 @@ msgstr ""
 #: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
 #: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113 appGUI/ObjectUI.py:1702
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
-#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215 appTools/ToolNCC.py:1974
-#: appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1470 appTools/ToolPaint.py:3016
+#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215 appTools/ToolNCC.py:1976
+#: appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1470 appTools/ToolPaint.py:3016
 #: defaults.py:469 defaults.py:507 tclCommands/TclCommandCopperClear.py:128
 #: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
 msgid "Seed"
@@ -960,8 +960,8 @@ msgstr ""
 #: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
 #: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1702
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
-#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215 appTools/ToolNCC.py:1985
-#: appTools/ToolNCC.py:4067 appTools/ToolPaint.py:160 appTools/ToolPaint.py:1484
+#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215 appTools/ToolNCC.py:1987
+#: appTools/ToolNCC.py:4127 appTools/ToolPaint.py:160 appTools/ToolPaint.py:1484
 #: appTools/ToolPaint.py:3016 tclCommands/TclCommandCopperClear.py:130
 #: tclCommands/TclCommandPaint.py:129
 msgid "Lines"
@@ -969,25 +969,25 @@ msgstr ""
 
 #: appDatabase.py:1586 appDatabase.py:1701
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
-#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215 appTools/ToolNCC.py:1996
-#: appTools/ToolNCC.py:4067 appTools/ToolPaint.py:1649 appTools/ToolPaint.py:3016
+#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215 appTools/ToolNCC.py:1998
+#: appTools/ToolNCC.py:4127 appTools/ToolPaint.py:1649 appTools/ToolPaint.py:3016
 #: tclCommands/TclCommandPaint.py:133
 msgid "Combo"
 msgstr ""
 
 #: appDatabase.py:1594 appDatabase.py:1712 appEditors/AppGeoEditor.py:505
-#: appGUI/ObjectUI.py:2257 appGUI/ObjectUI.py:2280
+#: appGUI/ObjectUI.py:2269 appGUI/ObjectUI.py:2292
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
-#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:222 appObjects/FlatCAMCNCJob.py:1300
-#: appObjects/FlatCAMCNCJob.py:1322 appTools/ToolNCC.py:4088 appTools/ToolNCC.py:4191
+#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:222 appObjects/FlatCAMCNCJob.py:1305
+#: appObjects/FlatCAMCNCJob.py:1327 appTools/ToolNCC.py:4148 appTools/ToolNCC.py:4251
 #: appTools/ToolPaint.py:3027
 msgid "Connect"
 msgstr ""
 
 #: appDatabase.py:1598 appDatabase.py:1715 appEditors/AppGeoEditor.py:507
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
-#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224 appTools/ToolNCC.py:4092
-#: appTools/ToolNCC.py:4193 appTools/ToolPaint.py:3030
+#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224 appTools/ToolNCC.py:4152
+#: appTools/ToolNCC.py:4253 appTools/ToolPaint.py:3030
 msgid ""
 "Draw lines between resulting\n"
 "segments to minimize tool lifts."
@@ -995,15 +995,15 @@ msgstr ""
 
 #: appDatabase.py:1604 appDatabase.py:1719 appEditors/AppGeoEditor.py:515
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
-#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:230 appTools/ToolNCC.py:4098
-#: appTools/ToolNCC.py:4199 appTools/ToolPaint.py:3034
+#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:230 appTools/ToolNCC.py:4158
+#: appTools/ToolNCC.py:4259 appTools/ToolPaint.py:3034
 msgid "Contour"
 msgstr ""
 
 #: appDatabase.py:1608 appDatabase.py:1722 appEditors/AppGeoEditor.py:517
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
-#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232 appTools/ToolNCC.py:4102
-#: appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3037
+#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232 appTools/ToolNCC.py:4162
+#: appTools/ToolNCC.py:4261 appTools/ToolPaint.py:3037
 msgid ""
 "Cut around the perimeter of the polygon\n"
 "to trim rough edges."
@@ -1015,13 +1015,13 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
 #: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
-#: appTools/ToolNCC.py:4108 appTools/ToolNCC.py:4207 appTools/ToolPaint.py:2976
+#: appTools/ToolNCC.py:4168 appTools/ToolNCC.py:4267 appTools/ToolPaint.py:2976
 #: appTools/ToolPaint.py:3083 appTools/ToolTransform.py:517
 msgid "Offset"
 msgstr ""
 
 #: appDatabase.py:1618 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
-#: appTools/ToolNCC.py:4112 appTools/ToolNCC.py:4209
+#: appTools/ToolNCC.py:4172 appTools/ToolNCC.py:4269
 msgid ""
 "If used, it will add an offset to the copper features.\n"
 "The copper clearing will finish to a distance\n"
@@ -1401,7 +1401,7 @@ msgstr ""
 #: appTools/ToolImage.py:322 appTools/ToolImage.py:333 appTools/ToolInvertGerber.py:304
 #: appTools/ToolInvertGerber.py:315 appTools/ToolIsolation.py:3494
 #: appTools/ToolIsolation.py:3505 appTools/ToolMilling.py:2341 appTools/ToolMilling.py:2352
-#: appTools/ToolNCC.py:4448 appTools/ToolNCC.py:4459 appTools/ToolOptimal.py:614
+#: appTools/ToolNCC.py:4508 appTools/ToolNCC.py:4519 appTools/ToolOptimal.py:614
 #: appTools/ToolOptimal.py:625 appTools/ToolPaint.py:3267 appTools/ToolPaint.py:3278
 #: appTools/ToolPanelize.py:914 appTools/ToolPanelize.py:925 appTools/ToolPcbWizard.py:488
 #: appTools/ToolPcbWizard.py:499 appTools/ToolPunchGerber.py:1022
@@ -1431,7 +1431,7 @@ msgstr ""
 #: appTools/ToolImage.py:328 appTools/ToolImage.py:335 appTools/ToolInvertGerber.py:310
 #: appTools/ToolInvertGerber.py:317 appTools/ToolIsolation.py:3500
 #: appTools/ToolIsolation.py:3507 appTools/ToolMilling.py:2347 appTools/ToolMilling.py:2354
-#: appTools/ToolNCC.py:4454 appTools/ToolNCC.py:4461 appTools/ToolOptimal.py:620
+#: appTools/ToolNCC.py:4514 appTools/ToolNCC.py:4521 appTools/ToolOptimal.py:620
 #: appTools/ToolOptimal.py:627 appTools/ToolPaint.py:3273 appTools/ToolPaint.py:3280
 #: appTools/ToolPanelize.py:920 appTools/ToolPanelize.py:927 appTools/ToolPcbWizard.py:494
 #: appTools/ToolPcbWizard.py:501 appTools/ToolPunchGerber.py:1028
@@ -1575,7 +1575,7 @@ msgstr ""
 #: appEditors/AppExcEditor.py:2003 appObjects/FlatCAMGeometry.py:706
 #: appObjects/FlatCAMGeometry.py:1232 appObjects/FlatCAMGeometry.py:1974
 #: appObjects/FlatCAMGeometry.py:2633 appTools/ToolIsolation.py:1252
-#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1195 appTools/ToolNCC.py:1332
+#: appTools/ToolIsolation.py:1705 appTools/ToolNCC.py:1197 appTools/ToolNCC.py:1334
 #: appTools/ToolPaint.py:889 appTools/ToolPaint.py:1027 appTools/ToolPaint.py:1740
 #: appTools/ToolSolderPaste.py:455 appTools/ToolSolderPaste.py:527
 msgid "Wrong value format entered, use a number."
@@ -1653,7 +1653,7 @@ msgid "Name:"
 msgstr ""
 
 #: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:620 appGUI/ObjectUI.py:967
-#: appTools/ToolIsolation.py:3010 appTools/ToolNCC.py:3813 appTools/ToolPaint.py:2800
+#: appTools/ToolIsolation.py:3010 appTools/ToolNCC.py:3873 appTools/ToolPaint.py:2800
 #: appTools/ToolSolderPaste.py:1155
 msgid "Tools Table"
 msgstr ""
@@ -1684,7 +1684,7 @@ msgstr ""
 
 #: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1084
 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
-#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3908
+#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3968
 msgid "Diameter for the new tool"
 msgstr ""
 
@@ -2007,7 +2007,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:327
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:289 appTools/ToolDrilling.py:2588
 #: appTools/ToolExtractDrills.py:486 appTools/ToolExtractDrills.py:619
-#: appTools/ToolIsolation.py:3430 appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4288
+#: appTools/ToolIsolation.py:3430 appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4348
 #: appTools/ToolPaint.py:3168 appTools/ToolPunchGerber.py:759
 #: appTools/ToolPunchGerber.py:909 appTools/ToolQRCode.py:788
 msgid "Square"
@@ -2049,6 +2049,17 @@ msgstr ""
 msgid "Font"
 msgstr ""
 
+#: appEditors/AppGeoEditor.py:313 appEditors/AppGerberEditor.py:2495
+#: appEditors/AppGerberEditor.py:3968 appGUI/ObjectUI.py:316
+#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
+#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
+#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
+#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
+#: appTools/ToolFiducials.py:770
+msgid "Size"
+msgstr ""
+
 #: appEditors/AppGeoEditor.py:322 appGUI/MainGUI.py:1502
 msgid "Text"
 msgstr ""
@@ -2066,8 +2077,8 @@ msgstr ""
 #: appObjects/FlatCAMGeometry.py:950 appTools/ToolDrilling.py:711
 #: appTools/ToolDrilling.py:1033 appTools/ToolDrilling.py:2116 appTools/ToolIsolation.py:697
 #: appTools/ToolIsolation.py:3166 appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
-#: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:329 appTools/ToolNCC.py:2278
-#: appTools/ToolNCC.py:3980 appTools/ToolPaint.py:304 appTools/ToolPaint.py:2940
+#: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:329 appTools/ToolNCC.py:2280
+#: appTools/ToolNCC.py:4040 appTools/ToolPaint.py:304 appTools/ToolPaint.py:2940
 msgid "Tool"
 msgstr ""
 
@@ -2174,7 +2185,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:256
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54 appTools/ToolIsolation.py:3368
-#: appTools/ToolNCC.py:4244 appTools/ToolPaint.py:3097 appTools/ToolTransform.py:557
+#: appTools/ToolNCC.py:4304 appTools/ToolPaint.py:3097 appTools/ToolTransform.py:557
 #: defaults.py:566
 msgid "Selection"
 msgstr ""
@@ -2208,7 +2219,7 @@ msgid "A point of reference in format X,Y."
 msgstr ""
 
 #: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
-#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2338 appTools/ToolDblSided.py:706
+#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2350 appTools/ToolDblSided.py:706
 #: appTools/ToolDblSided.py:892 appTools/ToolNCC.py:63 appTools/ToolPaint.py:137
 #: appTools/ToolSolderPaste.py:160 appTools/ToolSolderPaste.py:1203
 #: appTools/ToolTransform.py:572 app_Main.py:6121
@@ -2463,7 +2474,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
 #: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70 appTools/ToolCalibration.py:881
 #: appTools/ToolDrilling.py:2540 appTools/ToolFilm.py:931 appTools/ToolMilling.py:2218
-#: appTools/ToolNCC.py:3802 appTools/ToolPaint.py:2788 appTools/ToolPanelize.py:697
+#: appTools/ToolNCC.py:3862 appTools/ToolPaint.py:2788 appTools/ToolPanelize.py:697
 #: appTools/ToolTransform.py:557
 msgid "Object"
 msgstr ""
@@ -2867,7 +2878,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:309
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290 appTools/ToolDrilling.py:2589
-#: appTools/ToolIsolation.py:3431 appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4289
+#: appTools/ToolIsolation.py:3431 appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4349
 #: appTools/ToolPaint.py:3169
 msgid "Polygon"
 msgstr ""
@@ -2902,7 +2913,7 @@ msgstr ""
 msgid "Editing MultiGeo Geometry, tool"
 msgstr ""
 
-#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2280
+#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2282
 msgid "with diameter"
 msgstr ""
 
@@ -3109,16 +3120,6 @@ msgstr ""
 msgid "Code"
 msgstr ""
 
-#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:316 appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
-#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
-#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
-#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
-#: appTools/ToolFiducials.py:770
-msgid "Size"
-msgstr ""
-
 #: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
 #: appGUI/ObjectUI.py:316
 msgid "Dim"
@@ -3205,7 +3206,7 @@ msgstr ""
 #: appGUI/MainGUI.py:757 appGUI/MainGUI.py:1093 appGUI/MainGUI.py:1577
 #: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1132
 #: appObjects/FlatCAMGeometry.py:560 appTools/ToolIsolation.py:70
-#: appTools/ToolIsolation.py:3150 appTools/ToolNCC.py:69 appTools/ToolNCC.py:3964
+#: appTools/ToolIsolation.py:3150 appTools/ToolNCC.py:69 appTools/ToolNCC.py:4024
 #: appTools/ToolPaint.py:143 appTools/ToolPaint.py:2926 appTools/ToolSolderPaste.py:163
 #: appTools/ToolSolderPaste.py:1209 app_Main.py:6123
 msgid "Delete"
@@ -3588,20 +3589,20 @@ msgid "Open file"
 msgstr ""
 
 #: appEditors/AppTextEditor.py:255 appEditors/AppTextEditor.py:260
-#: appObjects/FlatCAMCNCJob.py:1641 appObjects/FlatCAMCNCJob.py:1646
-#: appObjects/FlatCAMCNCJob.py:1831 appObjects/FlatCAMCNCJob.py:1836
-#: appObjects/FlatCAMCNCJob.py:1909 appObjects/FlatCAMCNCJob.py:1914
+#: appObjects/FlatCAMCNCJob.py:1646 appObjects/FlatCAMCNCJob.py:1651
+#: appObjects/FlatCAMCNCJob.py:1836 appObjects/FlatCAMCNCJob.py:1841
+#: appObjects/FlatCAMCNCJob.py:1914 appObjects/FlatCAMCNCJob.py:1919
 #: appTools/ToolSolderPaste.py:1063 app_Main.py:7038 app_Main.py:7043
 msgid "Export Code ..."
 msgstr ""
 
-#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1663
-#: appObjects/FlatCAMCNCJob.py:1853 appObjects/FlatCAMCNCJob.py:2302
+#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1668
+#: appObjects/FlatCAMCNCJob.py:1858 appObjects/FlatCAMCNCJob.py:2307
 #: appTools/ToolSolderPaste.py:1093
 msgid "No such file or directory"
 msgstr ""
 
-#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2316
+#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2321
 msgid "Saved to"
 msgstr ""
 
@@ -3625,7 +3626,7 @@ msgstr ""
 msgid "Start GCode"
 msgstr ""
 
-#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2007
+#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:2012
 #: appTools/ToolCalibration.py:447
 msgid "Loaded Machine Code into Code Editor"
 msgstr ""
@@ -3642,7 +3643,7 @@ msgid "Dia"
 msgstr ""
 
 #: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:999 appGUI/ObjectUI.py:2009
-#: appTools/ToolIsolation.py:3022 appTools/ToolNCC.py:3825 appTools/ToolPaint.py:2813
+#: appTools/ToolIsolation.py:3022 appTools/ToolNCC.py:3885 appTools/ToolPaint.py:2813
 msgid "TT"
 msgstr ""
 
@@ -4634,8 +4635,8 @@ msgstr ""
 msgid "Zoom Fit"
 msgstr ""
 
-#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:2067
-msgid "&Command Line"
+#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:1154
+msgid "Command Line"
 msgstr ""
 
 #: appGUI/MainGUI.py:924 appGUI/MainGUI.py:2079
@@ -4924,10 +4925,6 @@ msgstr ""
 msgid "Preferences"
 msgstr ""
 
-#: appGUI/MainGUI.py:1154
-msgid "Command Line"
-msgstr ""
-
 #: appGUI/MainGUI.py:1160
 msgid "HUD (Heads up display)"
 msgstr ""
@@ -4950,11 +4947,16 @@ msgid ""
 "Reference is (X=0, Y= 0) position"
 msgstr ""
 
+#: appGUI/MainGUI.py:1194
+msgid "TCL Shell"
+msgstr ""
+
 #: appGUI/MainGUI.py:1221 appGUI/MainGUI.py:1470 app_Main.py:8143
 msgid "Project"
 msgstr ""
 
-#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272
+#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272 appGUI/MainGUI.py:3791
+#: appGUI/MainGUI.py:3797
 msgid "Plot Area"
 msgstr ""
 
@@ -5039,7 +5041,7 @@ msgstr ""
 msgid "Toggle Visibility"
 msgstr ""
 
-#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2330
+#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2342
 msgid "New"
 msgstr ""
 
@@ -5050,8 +5052,8 @@ msgstr ""
 #: appTools/ToolCutOut.py:2010 appTools/ToolDblSided.py:526 appTools/ToolDblSided.py:767
 #: appTools/ToolFilm.py:929 appTools/ToolFilm.py:952 appTools/ToolImage.py:136
 #: appTools/ToolImage.py:191 appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3338
-#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:803 appTools/ToolNCC.py:3788
-#: appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
+#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:805 appTools/ToolNCC.py:3848
+#: appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
 #: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
 #: appTools/ToolTransform.py:126 appTools/ToolTransform.py:587
 msgid "Geometry"
@@ -5065,8 +5067,8 @@ msgstr ""
 #: appTools/ToolCopperThieving.py:163 appTools/ToolCopperThieving.py:1237
 #: appTools/ToolCopperThieving.py:1251 appTools/ToolDblSided.py:527
 #: appTools/ToolDblSided.py:724 appTools/ToolDblSided.py:766 appTools/ToolFilm.py:1207
-#: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:803
-#: appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
+#: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:805
+#: appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
 #: appTools/ToolPanelize.py:147 appTools/ToolPunchGerber.py:803
 #: appTools/ToolPunchGerber.py:818 appTools/ToolTransform.py:126
 #: appTools/ToolTransform.py:586
@@ -5181,12 +5183,16 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:62
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:148 appTools/ToolDrilling.py:2090
-#: appTools/ToolIsolation.py:3066 appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3875
+#: appTools/ToolIsolation.py:3066 appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3935
 #: appTools/ToolPaint.py:2851 appTranslation.py:113 appTranslation.py:215 app_Main.py:2290
 #: app_Main.py:3385 app_Main.py:5810 app_Main.py:6894
 msgid "No"
 msgstr ""
 
+#: appGUI/MainGUI.py:2067
+msgid "&Command Line"
+msgstr ""
+
 #: appGUI/MainGUI.py:2086
 msgid "&Cutout Tool"
 msgstr ""
@@ -5873,7 +5879,7 @@ msgid ""
 "toolpaths to cut around polygons."
 msgstr ""
 
-#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4315
+#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1802 appTools/ToolNCC.py:4375
 msgid ""
 "Create the Geometry Object\n"
 "for non-copper routing."
@@ -5925,7 +5931,7 @@ msgid "Resulting geometry will have rounded corners."
 msgstr ""
 
 #: appGUI/ObjectUI.py:467 appGUI/ObjectUI.py:507 appTools/ToolCutOut.py:2287
-#: appTools/ToolCutOut.py:2302 appTools/ToolIsolation.py:3444 appTools/ToolNCC.py:4312
+#: appTools/ToolCutOut.py:2302 appTools/ToolIsolation.py:3444 appTools/ToolNCC.py:4372
 #: appTools/ToolPaint.py:3178
 msgid "Generate Geometry"
 msgstr ""
@@ -6162,12 +6168,12 @@ msgid ""
 msgstr ""
 
 #: appGUI/ObjectUI.py:1079 appTools/ToolIsolation.py:3087 appTools/ToolNCC.py:66
-#: appTools/ToolNCC.py:3902 appTools/ToolPaint.py:140 appTools/ToolPaint.py:2878
+#: appTools/ToolNCC.py:3962 appTools/ToolPaint.py:140 appTools/ToolPaint.py:2878
 msgid "Add from DB"
 msgstr ""
 
 #: appGUI/ObjectUI.py:1096 appTools/ToolCutOut.py:2071 appTools/ToolIsolation.py:61
-#: appTools/ToolIsolation.py:3122 appTools/ToolNCC.py:3936 appTools/ToolPaint.py:2898
+#: appTools/ToolIsolation.py:3122 appTools/ToolNCC.py:3996 appTools/ToolPaint.py:2898
 msgid "Search and Add"
 msgstr ""
 
@@ -6178,12 +6184,12 @@ msgid ""
 msgstr ""
 
 #: appGUI/ObjectUI.py:1103 appTools/ToolCutOut.py:2083 appTools/ToolIsolation.py:65
-#: appTools/ToolIsolation.py:3133 appTools/ToolNCC.py:3947 appTools/ToolPaint.py:2909
+#: appTools/ToolIsolation.py:3133 appTools/ToolNCC.py:4007 appTools/ToolPaint.py:2909
 msgid "Pick from DB"
 msgstr ""
 
 #: appGUI/ObjectUI.py:1106 appTools/ToolCutOut.py:2086 appTools/ToolIsolation.py:3136
-#: appTools/ToolNCC.py:3950 appTools/ToolPaint.py:2912
+#: appTools/ToolNCC.py:4010 appTools/ToolPaint.py:2912
 msgid ""
 "Add a new tool to the Tool Table\n"
 "from the Tools Database.\n"
@@ -6216,7 +6222,7 @@ msgstr ""
 #: appTools/ToolMilling.py:749 appTools/ToolMilling.py:779 appTools/ToolMilling.py:790
 #: appTools/ToolMilling.py:794 appTools/ToolMilling.py:1711 appTools/ToolNCC.py:271
 #: appTools/ToolNCC.py:276 appTools/ToolNCC.py:306 appTools/ToolNCC.py:329
-#: appTools/ToolNCC.py:342 appTools/ToolNCC.py:711 appTools/ToolNCC.py:3980
+#: appTools/ToolNCC.py:342 appTools/ToolNCC.py:713 appTools/ToolNCC.py:4040
 #: appTools/ToolPaint.py:247 appTools/ToolPaint.py:252 appTools/ToolPaint.py:282
 #: appTools/ToolPaint.py:304 appTools/ToolPaint.py:316 appTools/ToolPaint.py:655
 #: appTools/ToolPaint.py:2940
@@ -6224,7 +6230,7 @@ msgid "Parameters for"
 msgstr ""
 
 #: appGUI/ObjectUI.py:1175 appTools/ToolDrilling.py:2119 appTools/ToolIsolation.py:3169
-#: appTools/ToolMilling.py:1714 appTools/ToolNCC.py:3983 appTools/ToolPaint.py:2943
+#: appTools/ToolMilling.py:1714 appTools/ToolNCC.py:4043 appTools/ToolPaint.py:2943
 msgid ""
 "The data used for creating GCode.\n"
 "Each tool store it's own set of such data."
@@ -6338,7 +6344,7 @@ msgstr ""
 msgid "Number of time units for spindle to dwell."
 msgstr ""
 
-#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2128
+#: appGUI/ObjectUI.py:1388 appGUI/ObjectUI.py:2140
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333 appTools/ToolDrilling.py:2461
@@ -6346,7 +6352,7 @@ msgstr ""
 msgid "Probe Z depth"
 msgstr ""
 
-#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2130
+#: appGUI/ObjectUI.py:1390 appGUI/ObjectUI.py:2142
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335 appTools/ToolDrilling.py:2463
@@ -6362,7 +6368,7 @@ msgstr ""
 msgid "Feedrate Probe"
 msgstr ""
 
-#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2143
+#: appGUI/ObjectUI.py:1407 appGUI/ObjectUI.py:2155
 #: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
 #: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
 #: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348 appTools/ToolDrilling.py:2482
@@ -6371,24 +6377,24 @@ msgid "The feedrate used while the probe is probing."
 msgstr ""
 
 #: appGUI/ObjectUI.py:1434 appTools/ToolDrilling.py:2364 appTools/ToolIsolation.py:3265
-#: appTools/ToolMilling.py:2042 appTools/ToolNCC.py:4141 appTools/ToolPaint.py:3049
+#: appTools/ToolMilling.py:2042 appTools/ToolNCC.py:4201 appTools/ToolPaint.py:3049
 msgid "Apply parameters to all tools"
 msgstr ""
 
 #: appGUI/ObjectUI.py:1437 appTools/ToolDrilling.py:2367 appTools/ToolIsolation.py:3268
-#: appTools/ToolMilling.py:2045 appTools/ToolNCC.py:4144 appTools/ToolPaint.py:3052
+#: appTools/ToolMilling.py:2045 appTools/ToolNCC.py:4204 appTools/ToolPaint.py:3052
 msgid ""
 "The parameters in the current form will be applied\n"
 "on all the tools from the Tool Table."
 msgstr ""
 
 #: appGUI/ObjectUI.py:1448 appTools/ToolDrilling.py:2378 appTools/ToolIsolation.py:3279
-#: appTools/ToolMilling.py:2056 appTools/ToolNCC.py:4155 appTools/ToolPaint.py:3063
+#: appTools/ToolMilling.py:2056 appTools/ToolNCC.py:4215 appTools/ToolPaint.py:3063
 msgid "Common Parameters"
 msgstr ""
 
 #: appGUI/ObjectUI.py:1450 appTools/ToolDrilling.py:2380 appTools/ToolIsolation.py:3281
-#: appTools/ToolMilling.py:2058 appTools/ToolNCC.py:4157 appTools/ToolPaint.py:3065
+#: appTools/ToolMilling.py:2058 appTools/ToolNCC.py:4217 appTools/ToolPaint.py:3065
 msgid "Parameters that are common for all tools."
 msgstr ""
 
@@ -6537,7 +6543,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:305
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286 appTools/ToolDrilling.py:2591
-#: appTools/ToolIsolation.py:3427 appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4285
+#: appTools/ToolIsolation.py:3427 appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4345
 #: appTools/ToolPaint.py:3165
 msgid "The kind of selection shape used for area selection."
 msgstr ""
@@ -6717,300 +6723,300 @@ msgstr ""
 msgid "Autolevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2052
+#: appGUI/ObjectUI.py:2053
 msgid "Enable the autolevelling feature."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2069
+#: appGUI/ObjectUI.py:2081
 msgid "Probe Points Table"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2070
+#: appGUI/ObjectUI.py:2082
 msgid "Generate GCode that will obtain the height map"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2072
+#: appGUI/ObjectUI.py:2084
 msgid "Show"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2073
+#: appGUI/ObjectUI.py:2085
 msgid "Toggle the display of the Probe Points table."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 msgid "X-Y Coordinates"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2098
 msgid "Height"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2090
+#: appGUI/ObjectUI.py:2102
 msgid "Plot probing points"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2092
+#: appGUI/ObjectUI.py:2104
 msgid ""
 "Plot the probing points in the table.\n"
 "If a Voronoi method is used then\n"
 "the Voronoi areas are also plotted."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2107
+#: appGUI/ObjectUI.py:2119
 msgid "Probe GCode Generation"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2109
+#: appGUI/ObjectUI.py:2121
 msgid ""
 "Will create a GCode which will be sent to the controller,\n"
 "either through a file or directly, with the intent to get the height map\n"
 "that is to modify the original GCode to level the cutting height."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2116 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
+#: appGUI/ObjectUI.py:2128 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
 msgid "Probe Z travel"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2118 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
+#: appGUI/ObjectUI.py:2130 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
 msgid "The safe Z for probe travelling between probe points."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2141 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
+#: appGUI/ObjectUI.py:2153 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
 msgid "Probe Feedrate"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2158 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
+#: appGUI/ObjectUI.py:2170 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
 msgid "Mode"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2159 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
+#: appGUI/ObjectUI.py:2171 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
 msgid ""
 "Choose a mode for height map generation.\n"
 "- Manual: will pick a selection of probe points by clicking on canvas\n"
 "- Grid: will automatically generate a grid of probe points"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2165 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
+#: appGUI/ObjectUI.py:2177 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
 #: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74 appTools/ToolCutOut.py:2324
 #: appTools/ToolFiducials.py:801
 msgid "Manual"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2166 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
+#: appGUI/ObjectUI.py:2178 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
 msgid "Grid"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2173 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
+#: appGUI/ObjectUI.py:2185 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
 msgid ""
 "Choose a method for approximation of heights from autolevelling data.\n"
 "- Voronoi: will generate a Voronoi diagram\n"
 "- Bilinear: will use bilinear interpolation. Usable only for grid mode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2179 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
+#: appGUI/ObjectUI.py:2191 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
 msgid "Voronoi"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2180 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
+#: appGUI/ObjectUI.py:2192 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
 msgid "Bilinear"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2193 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
+#: appGUI/ObjectUI.py:2205 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77 appTools/ToolPanelize.py:787
 msgid "Columns"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2195 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
+#: appGUI/ObjectUI.py:2207 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
 msgid "The number of grid columns."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2204 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
+#: appGUI/ObjectUI.py:2216 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
 #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89 appTools/ToolPanelize.py:797
 msgid "Rows"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2206 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
+#: appGUI/ObjectUI.py:2218 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
 msgid "The number of gird rows."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2211
+#: appGUI/ObjectUI.py:2223
 msgid "Add Probe Points"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2219 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
+#: appGUI/ObjectUI.py:2231 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
 msgid "Controller"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2221 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
+#: appGUI/ObjectUI.py:2233 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
 msgid ""
 "The kind of controller for which to generate\n"
 "height map gcode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2267 appGUI/ObjectUI.py:2282 appObjects/FlatCAMCNCJob.py:1302
-#: appObjects/FlatCAMCNCJob.py:1324
+#: appGUI/ObjectUI.py:2279 appGUI/ObjectUI.py:2294 appObjects/FlatCAMCNCJob.py:1307
+#: appObjects/FlatCAMCNCJob.py:1329
 msgid "Control"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2277 appGUI/ObjectUI.py:2284 appObjects/FlatCAMCNCJob.py:1304
-#: appObjects/FlatCAMCNCJob.py:1326
+#: appGUI/ObjectUI.py:2289 appGUI/ObjectUI.py:2296 appObjects/FlatCAMCNCJob.py:1309
+#: appObjects/FlatCAMCNCJob.py:1331
 msgid "Sender"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2298
+#: appGUI/ObjectUI.py:2310
 msgid "COM list"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2300 appGUI/ObjectUI.py:2315
+#: appGUI/ObjectUI.py:2312 appGUI/ObjectUI.py:2327
 msgid "Lists the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2304
+#: appGUI/ObjectUI.py:2316
 msgid "Search"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2306
+#: appGUI/ObjectUI.py:2318
 msgid "Search for the available serial ports."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2313
+#: appGUI/ObjectUI.py:2325
 msgid "Baud rates"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2332
+#: appGUI/ObjectUI.py:2344
 msgid "New, custom baudrate."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2340
+#: appGUI/ObjectUI.py:2352
 msgid "Add the specified custom baudrate to the list."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2346
+#: appGUI/ObjectUI.py:2358
 msgid "Delete selected baudrate"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2350
+#: appGUI/ObjectUI.py:2362
 msgid "Reset"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2352
+#: appGUI/ObjectUI.py:2364
 msgid "Software reset of the controller."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2358 appObjects/FlatCAMCNCJob.py:1318
+#: appGUI/ObjectUI.py:2370 appObjects/FlatCAMCNCJob.py:1323
 msgid "Disconnected"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2360
+#: appGUI/ObjectUI.py:2372
 msgid "Connect to the selected port with the selected baud rate."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2385
+#: appGUI/ObjectUI.py:2397
 msgid "Jog"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2393
+#: appGUI/ObjectUI.py:2405
 msgid "Zero Axes"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2426
+#: appGUI/ObjectUI.py:2438
 msgid "Pause/Resume"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2448 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
+#: appGUI/ObjectUI.py:2460 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
 msgid "Step"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2450 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
+#: appGUI/ObjectUI.py:2462 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
 msgid "Each jog action will move the axes with this value."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2462 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
+#: appGUI/ObjectUI.py:2474 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
 #: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89 appObjects/FlatCAMObj.py:831
 #: appTools/ToolProperties.py:529
 msgid "Feedrate"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2464 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
+#: appGUI/ObjectUI.py:2476 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
 msgid "Feedrate when jogging."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2484
+#: appGUI/ObjectUI.py:2496
 msgid "Send Command"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2486 appGUI/ObjectUI.py:2496
+#: appGUI/ObjectUI.py:2498 appGUI/ObjectUI.py:2508
 msgid "Send a custom command to GRBL."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2491
+#: appGUI/ObjectUI.py:2503
 msgid "Type GRBL command ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2494
+#: appGUI/ObjectUI.py:2506
 msgid "Send"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2502
+#: appGUI/ObjectUI.py:2514
 msgid "Get Config parameter"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2504
+#: appGUI/ObjectUI.py:2516
 msgid "A GRBL configuration parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2509
+#: appGUI/ObjectUI.py:2521
 msgid "Type GRBL parameter ..."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2512
+#: appGUI/ObjectUI.py:2524
 msgid "Get"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2514
+#: appGUI/ObjectUI.py:2526
 msgid "Get the value of a specified GRBL parameter."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2522
+#: appGUI/ObjectUI.py:2534
 msgid "Get Report"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2524
+#: appGUI/ObjectUI.py:2536
 msgid "Print in shell the GRBL report."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2530
+#: appGUI/ObjectUI.py:2542
 msgid "Apply AutoLevelling"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2532
+#: appGUI/ObjectUI.py:2544
 msgid ""
 "Will send the probing GCode to the GRBL controller,\n"
 "wait for the Z probing data and then apply this data\n"
 "over the original GCode therefore doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2541
+#: appGUI/ObjectUI.py:2553
 msgid "Will save the GRBL height map."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2551
+#: appGUI/ObjectUI.py:2563
 msgid "Save Probing GCode"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2553
+#: appGUI/ObjectUI.py:2565
 msgid "Will save the probing GCode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2562
+#: appGUI/ObjectUI.py:2574
 msgid "View/Edit the probing GCode."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2569 appObjects/FlatCAMCNCJob.py:1735 appObjects/FlatCAMCNCJob.py:1739
+#: appGUI/ObjectUI.py:2581 appObjects/FlatCAMCNCJob.py:1740 appObjects/FlatCAMCNCJob.py:1744
 msgid "Import Height Map"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2571
+#: appGUI/ObjectUI.py:2583
 msgid ""
 "Import the file that has the Z heights\n"
 "obtained through probing and then apply this data\n"
@@ -7018,100 +7024,100 @@ msgid ""
 "doing autolevelling."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2589
+#: appGUI/ObjectUI.py:2601
 msgid "Export CNC Code"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2591 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
+#: appGUI/ObjectUI.py:2603 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
 #: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
 msgid ""
 "Export and save G-Code to\n"
 "make this object to a file."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2600
+#: appGUI/ObjectUI.py:2612
 msgid "Save CNC Code"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2603
+#: appGUI/ObjectUI.py:2615
 msgid ""
 "Opens dialog to save G-Code\n"
 "file."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2610
+#: appGUI/ObjectUI.py:2622
 msgid "Review CNC Code."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2671
+#: appGUI/ObjectUI.py:2683
 msgid "Script Object"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2691 appGUI/ObjectUI.py:2765
+#: appGUI/ObjectUI.py:2703 appGUI/ObjectUI.py:2777
 msgid "Auto Completer"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2693
+#: appGUI/ObjectUI.py:2705
 msgid "This selects if the auto completer is enabled in the Script Editor."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2738
+#: appGUI/ObjectUI.py:2750
 msgid "Document Object"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2767
+#: appGUI/ObjectUI.py:2779
 msgid "This selects if the auto completer is enabled in the Document Editor."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2785
+#: appGUI/ObjectUI.py:2797
 msgid "Font Type"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2802 appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
+#: appGUI/ObjectUI.py:2814 appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
 msgid "Font Size"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2838
+#: appGUI/ObjectUI.py:2850
 msgid "Alignment"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2843
+#: appGUI/ObjectUI.py:2855
 msgid "Align Left"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2848 app_Main.py:4993
+#: appGUI/ObjectUI.py:2860 app_Main.py:4993
 msgid "Center"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2853
+#: appGUI/ObjectUI.py:2865
 msgid "Align Right"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2858
+#: appGUI/ObjectUI.py:2870
 msgid "Justify"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2865
+#: appGUI/ObjectUI.py:2877
 msgid "Font Color"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2867
+#: appGUI/ObjectUI.py:2879
 msgid "Set the font color for the selected text"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2881
+#: appGUI/ObjectUI.py:2893
 msgid "Selection Color"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2883
+#: appGUI/ObjectUI.py:2895
 msgid "Set the selection color when doing text selection."
 msgstr ""
 
-#: appGUI/ObjectUI.py:2897
+#: appGUI/ObjectUI.py:2909
 msgid "Tab Size"
 msgstr ""
 
-#: appGUI/ObjectUI.py:2899
+#: appGUI/ObjectUI.py:2911
 msgid "Set the tab size. In pixels. Default value is 80 pixels."
 msgstr ""
 
@@ -8872,10 +8878,10 @@ msgstr ""
 #: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64 appObjects/FlatCAMGerber.py:370
 #: appTools/ToolCopperThieving.py:581 appTools/ToolCopperThieving.py:770
 #: appTools/ToolCopperThieving.py:782 appTools/ToolIsolation.py:1353
-#: appTools/ToolNCC.py:1791 appTools/ToolNCC.py:1818 appTools/ToolNCC.py:1926
-#: appTools/ToolNCC.py:1939 appTools/ToolNCC.py:2785 appTools/ToolNCC.py:2890
-#: appTools/ToolNCC.py:2905 appTools/ToolNCC.py:3171 appTools/ToolNCC.py:3272
-#: appTools/ToolNCC.py:3287 camlib.py:1113
+#: appTools/ToolNCC.py:1793 appTools/ToolNCC.py:1820 appTools/ToolNCC.py:1928
+#: appTools/ToolNCC.py:1941 appTools/ToolNCC.py:2845 appTools/ToolNCC.py:2950
+#: appTools/ToolNCC.py:2965 appTools/ToolNCC.py:3231 appTools/ToolNCC.py:3332
+#: appTools/ToolNCC.py:3347 camlib.py:1113
 msgid "Buffering"
 msgstr ""
 
@@ -9149,9 +9155,9 @@ msgstr ""
 
 #: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309 appTools/ToolCopperThieving.py:1218
-#: appTools/ToolNCC.py:1349 appTools/ToolNCC.py:1665 appTools/ToolNCC.py:1729
-#: appTools/ToolNCC.py:2649 appTools/ToolNCC.py:2658 appTools/ToolNCC.py:4240
-#: appTools/ToolNCC.py:4376 defaults.py:475 tclCommands/TclCommandCopperClear.py:190
+#: appTools/ToolNCC.py:1351 appTools/ToolNCC.py:1667 appTools/ToolNCC.py:1731
+#: appTools/ToolNCC.py:2709 appTools/ToolNCC.py:2718 appTools/ToolNCC.py:4300
+#: appTools/ToolNCC.py:4436 defaults.py:475 tclCommands/TclCommandCopperClear.py:190
 msgid "Itself"
 msgstr ""
 
@@ -9160,8 +9166,8 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278 appTools/ToolCopperThieving.py:1219
 #: appTools/ToolIsolation.py:819 appTools/ToolIsolation.py:1435
-#: appTools/ToolIsolation.py:3378 appTools/ToolNCC.py:1363 appTools/ToolNCC.py:1681
-#: appTools/ToolNCC.py:1736 appTools/ToolNCC.py:4240 appTools/ToolNCC.py:4386
+#: appTools/ToolIsolation.py:3378 appTools/ToolNCC.py:1365 appTools/ToolNCC.py:1683
+#: appTools/ToolNCC.py:1738 appTools/ToolNCC.py:4300 appTools/ToolNCC.py:4446
 #: appTools/ToolPaint.py:1061 appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3249
 msgid "Area Selection"
 msgstr ""
@@ -9171,9 +9177,9 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278 appTools/ToolCopperThieving.py:1220
 #: appTools/ToolDblSided.py:757 appTools/ToolIsolation.py:1475
-#: appTools/ToolIsolation.py:3378 appTools/ToolNCC.py:1382 appTools/ToolNCC.py:1687
-#: appTools/ToolNCC.py:1744 appTools/ToolNCC.py:2122 appTools/ToolNCC.py:2356
-#: appTools/ToolNCC.py:2694 appTools/ToolNCC.py:4240 appTools/ToolPaint.py:1080
+#: appTools/ToolIsolation.py:3378 appTools/ToolNCC.py:1384 appTools/ToolNCC.py:1689
+#: appTools/ToolNCC.py:1746 appTools/ToolNCC.py:2124 appTools/ToolNCC.py:2358
+#: appTools/ToolNCC.py:2754 appTools/ToolNCC.py:4300 appTools/ToolPaint.py:1080
 #: appTools/ToolPaint.py:3127 appTools/ToolPaint.py:3232
 #: tclCommands/TclCommandCopperClear.py:192 tclCommands/TclCommandPaint.py:166
 msgid "Reference Object"
@@ -10267,7 +10273,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:54
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:140 appTools/ToolDrilling.py:2082
-#: appTools/ToolIsolation.py:3058 appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3867
+#: appTools/ToolIsolation.py:3058 appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3927
 #: appTools/ToolPaint.py:2843
 msgid "Tool order"
 msgstr ""
@@ -10277,8 +10283,8 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:157
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141 appTools/ToolDrilling.py:2083
-#: appTools/ToolIsolation.py:3059 appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3868
-#: appTools/ToolNCC.py:3878 appTools/ToolPaint.py:2844 appTools/ToolPaint.py:2854
+#: appTools/ToolIsolation.py:3059 appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3928
+#: appTools/ToolNCC.py:3938 appTools/ToolPaint.py:2844 appTools/ToolPaint.py:2854
 msgid ""
 "This set the way that the tools in the tools table are used.\n"
 "'No' --> means that the used order is the one in the tool table\n"
@@ -10293,7 +10299,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:63
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:149 appTools/ToolDrilling.py:2091
-#: appTools/ToolIsolation.py:3067 appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3876
+#: appTools/ToolIsolation.py:3067 appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3936
 #: appTools/ToolPaint.py:2852
 msgid "Forward"
 msgstr ""
@@ -10302,7 +10308,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150 appTools/ToolDrilling.py:2092
-#: appTools/ToolIsolation.py:3068 appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3877
+#: appTools/ToolIsolation.py:3068 appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3937
 #: appTools/ToolPaint.py:2853
 msgid "Reverse"
 msgstr ""
@@ -10575,7 +10581,7 @@ msgstr ""
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:242
 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243 appTools/ToolIsolation.py:3286
-#: appTools/ToolNCC.py:4162 appTools/ToolPaint.py:3069
+#: appTools/ToolNCC.py:4222 appTools/ToolPaint.py:3069
 msgid "Rest"
 msgstr ""
 
@@ -10611,13 +10617,13 @@ msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:350 appTools/ToolIsolation.py:3320
-#: appTools/ToolNCC.py:4298
+#: appTools/ToolNCC.py:4358
 msgid "Check validity"
 msgstr ""
 
 #: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277
 #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:352 appTools/ToolIsolation.py:3322
-#: appTools/ToolNCC.py:4300
+#: appTools/ToolNCC.py:4360
 msgid ""
 "If checked then the tools diameters are verified\n"
 "if they will provide a complete isolation."
@@ -10712,7 +10718,7 @@ msgid ""
 "The value can be between 0.0 and 9999.9 FlatCAM units."
 msgstr ""
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4166
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4226
 msgid ""
 "If checked, use 'rest machining'.\n"
 "Basically it will clear copper outside PCB features,\n"
@@ -10723,7 +10729,7 @@ msgid ""
 "If not checked, use the standard algorithm."
 msgstr ""
 
-#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4246
+#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4306
 msgid ""
 "Selection of area to be processed.\n"
 "- 'Itself' - the processing extent is based on the object that is processed.\n"
@@ -10817,8 +10823,8 @@ msgstr ""
 #: appTools/ToolDblSided.py:525 appTools/ToolDblSided.py:765 appTools/ToolFilm.py:928
 #: appTools/ToolFilm.py:951 appTools/ToolImage.py:117 appTools/ToolImage.py:138
 #: appTools/ToolImage.py:191 appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:3339
-#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:803 appTools/ToolNCC.py:3789
-#: appTools/ToolNCC.py:4263 appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
+#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:805 appTools/ToolNCC.py:3849
+#: appTools/ToolNCC.py:4323 appTools/ToolPaint.py:167 appTools/ToolPaint.py:3143
 #: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
 #: appTools/ToolPanelize.py:809 appTools/ToolTransform.py:126 appTools/ToolTransform.py:585
 #: defaults.py:567
@@ -11271,145 +11277,145 @@ msgstr ""
 msgid "created/selected"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:637 appObjects/FlatCAMDocument.py:71
+#: appObjects/FlatCAMCNCJob.py:642 appObjects/FlatCAMDocument.py:71
 #: appObjects/FlatCAMScript.py:82
 msgid "<span style=\"color:green;\"><b>Basic</b></span>"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:644 appObjects/FlatCAMDocument.py:75
+#: appObjects/FlatCAMCNCJob.py:649 appObjects/FlatCAMDocument.py:75
 #: appObjects/FlatCAMScript.py:86
 msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:780 appObjects/FlatCAMCNCJob.py:1058
+#: appObjects/FlatCAMCNCJob.py:785 appObjects/FlatCAMCNCJob.py:1063
 msgid ""
 "Voronoi function can not be loaded.\n"
 "Shapely >= 1.8 is required"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:808
+#: appObjects/FlatCAMCNCJob.py:813
 msgid "Click on canvas to add a Probe Point..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1004
+#: appObjects/FlatCAMCNCJob.py:1009
 msgid "Point is not within the object area. Choose another point."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1024
+#: appObjects/FlatCAMCNCJob.py:1029
 msgid "Added a Probe Point... Click again to add another or right click to finish ..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1046
+#: appObjects/FlatCAMCNCJob.py:1051
 msgid "Finished adding Probe Points..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1260
+#: appObjects/FlatCAMCNCJob.py:1265
 msgid "COM list updated ..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1296
+#: appObjects/FlatCAMCNCJob.py:1301
 msgid "Connected"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1307
+#: appObjects/FlatCAMCNCJob.py:1312
 msgid "Port connected"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1311
+#: appObjects/FlatCAMCNCJob.py:1316
 msgid "Could not connect to GRBL on port"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1328
+#: appObjects/FlatCAMCNCJob.py:1333
 msgid "Port is connected. Disconnecting"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1330
+#: appObjects/FlatCAMCNCJob.py:1335
 msgid "Could not connect to port"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1360 appObjects/FlatCAMCNCJob.py:1790
+#: appObjects/FlatCAMCNCJob.py:1365 appObjects/FlatCAMCNCJob.py:1795
 msgid "Sending GCode..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1489
+#: appObjects/FlatCAMCNCJob.py:1494
 msgid "GRBL is doing a home cycle."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1495
+#: appObjects/FlatCAMCNCJob.py:1500
 msgid "GRBL software reset was sent."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1503
+#: appObjects/FlatCAMCNCJob.py:1508
 msgid "GRBL resumed."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1507
+#: appObjects/FlatCAMCNCJob.py:1512
 msgid "GRBL paused."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1649 appObjects/FlatCAMCNCJob.py:1839
-#: appObjects/FlatCAMCNCJob.py:1924 appTools/ToolSolderPaste.py:1066
+#: appObjects/FlatCAMCNCJob.py:1654 appObjects/FlatCAMCNCJob.py:1844
+#: appObjects/FlatCAMCNCJob.py:1929 appTools/ToolSolderPaste.py:1066
 msgid "Export cancelled ..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1673 appObjects/FlatCAMCNCJob.py:1960
+#: appObjects/FlatCAMCNCJob.py:1678 appObjects/FlatCAMCNCJob.py:1965
 #: appObjects/FlatCAMScript.py:134 app_Main.py:7824
 msgid "Loading..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1677
+#: appObjects/FlatCAMCNCJob.py:1682
 msgid "There is nothing to view"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1683
+#: appObjects/FlatCAMCNCJob.py:1688
 msgid "Code Viewer"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1721
+#: appObjects/FlatCAMCNCJob.py:1726
 msgid "Loaded Machine Code into Code Viewer"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1766
+#: appObjects/FlatCAMCNCJob.py:1771
 msgid "Failed to open height map file"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1816
+#: appObjects/FlatCAMCNCJob.py:1821
 msgid "Finished probing. Doing the autolevelling."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1821
+#: appObjects/FlatCAMCNCJob.py:1826
 msgid "Sending probing GCode to the GRBL controller."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1862
+#: appObjects/FlatCAMCNCJob.py:1867
 msgid "Empty GRBL heightmap."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1866
+#: appObjects/FlatCAMCNCJob.py:1871
 msgid "Finished autolevelling."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1880
+#: appObjects/FlatCAMCNCJob.py:1885
 msgid "Plotting..."
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1950
+#: appObjects/FlatCAMCNCJob.py:1955
 msgid "File saved to"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:1974
+#: appObjects/FlatCAMCNCJob.py:1979
 msgid "Code Review"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:2157
+#: appObjects/FlatCAMCNCJob.py:2162
 msgid "This CNCJob object can't be processed because it is a"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:2159
+#: appObjects/FlatCAMCNCJob.py:2164
 msgid "CNCJob object"
 msgstr ""
 
-#: appObjects/FlatCAMCNCJob.py:2269
+#: appObjects/FlatCAMCNCJob.py:2274
 msgid ""
 "G-code does not have a G94 code.\n"
 "Append Code snippet will not be used.."
@@ -11468,7 +11474,7 @@ msgstr ""
 #: appTools/ToolDrilling.py:990 appTools/ToolDrilling.py:1037 appTools/ToolIsolation.py:531
 #: appTools/ToolIsolation.py:644 appTools/ToolIsolation.py:710 appTools/ToolMilling.py:628
 #: appTools/ToolMilling.py:749 appTools/ToolMilling.py:794 appTools/ToolNCC.py:276
-#: appTools/ToolNCC.py:342 appTools/ToolNCC.py:711 appTools/ToolPaint.py:252
+#: appTools/ToolNCC.py:342 appTools/ToolNCC.py:713 appTools/ToolPaint.py:252
 #: appTools/ToolPaint.py:316 appTools/ToolPaint.py:655
 msgid "Multiple Tools"
 msgstr ""
@@ -11631,8 +11637,8 @@ msgid "Operation could not be done."
 msgstr ""
 
 #: appObjects/FlatCAMGerber.py:558 appObjects/FlatCAMGerber.py:632
-#: appTools/ToolIsolation.py:1583 appTools/ToolIsolation.py:1951 appTools/ToolNCC.py:1854
-#: appTools/ToolNCC.py:2819 appTools/ToolNCC.py:3198
+#: appTools/ToolIsolation.py:1583 appTools/ToolIsolation.py:1951 appTools/ToolNCC.py:1856
+#: appTools/ToolNCC.py:2879 appTools/ToolNCC.py:3258
 msgid "Isolation geometry could not be generated."
 msgstr ""
 
@@ -12015,7 +12021,7 @@ msgstr ""
 #: appTools/ToolDrilling.py:2649 appTools/ToolEtchCompensation.py:458
 #: appTools/ToolExtractDrills.py:702 appTools/ToolFiducials.py:932 appTools/ToolFilm.py:1383
 #: appTools/ToolInvertGerber.py:286 appTools/ToolIsolation.py:3477
-#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4328 appTools/ToolOptimal.py:593
+#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4388 appTools/ToolOptimal.py:593
 #: appTools/ToolPaint.py:3194 appTools/ToolPanelize.py:889 appTools/ToolPunchGerber.py:993
 #: appTools/ToolQRCode.py:904 appTools/ToolRulesCheck.py:1618
 #: appTools/ToolSolderPaste.py:1557 appTools/ToolSub.py:754 appTools/ToolTransform.py:920
@@ -12028,7 +12034,7 @@ msgstr ""
 #: appTools/ToolDrilling.py:2652 appTools/ToolEtchCompensation.py:461
 #: appTools/ToolExtractDrills.py:705 appTools/ToolFiducials.py:935 appTools/ToolFilm.py:1386
 #: appTools/ToolInvertGerber.py:289 appTools/ToolIsolation.py:3480
-#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4331 appTools/ToolOptimal.py:596
+#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4391 appTools/ToolOptimal.py:596
 #: appTools/ToolPaint.py:3197 appTools/ToolPanelize.py:892 appTools/ToolPunchGerber.py:996
 #: appTools/ToolQRCode.py:907 appTools/ToolRulesCheck.py:1621
 #: appTools/ToolSolderPaste.py:1560 appTools/ToolSub.py:757 appTools/ToolTransform.py:923
@@ -12418,8 +12424,8 @@ msgstr ""
 #: appTools/ToolDrilling.py:1582 appTools/ToolEtchCompensation.py:152
 #: appTools/ToolInvertGerber.py:99 appTools/ToolIsolation.py:908
 #: appTools/ToolIsolation.py:1345 appTools/ToolIsolation.py:1372 appTools/ToolMilling.py:424
-#: appTools/ToolMilling.py:639 appTools/ToolMilling.py:1322 appTools/ToolNCC.py:844
-#: appTools/ToolNCC.py:1306 appTools/ToolNCC.py:1355 appTools/ToolNCC.py:1388
+#: appTools/ToolMilling.py:639 appTools/ToolMilling.py:1322 appTools/ToolNCC.py:846
+#: appTools/ToolNCC.py:1308 appTools/ToolNCC.py:1357 appTools/ToolNCC.py:1390
 #: appTools/ToolPaint.py:1086 appTools/ToolPanelize.py:191 appTools/ToolPanelize.py:205
 #: appTools/ToolSub.py:157 appTools/ToolSub.py:170 appTools/ToolSub.py:359
 #: appTools/ToolSub.py:372 tclCommands/TclCommandCopperClear.py:97
@@ -12449,7 +12455,7 @@ msgid "Copper Thieving Tool. Preparing areas to fill with copper."
 msgstr ""
 
 #: appTools/ToolCopperThieving.py:599 appTools/ToolFilm.py:631 appTools/ToolFilm.py:879
-#: appTools/ToolIsolation.py:916 appTools/ToolNCC.py:851 appTools/ToolOptimal.py:145
+#: appTools/ToolIsolation.py:916 appTools/ToolNCC.py:853 appTools/ToolOptimal.py:145
 #: appTools/ToolPanelize.py:612 appTools/ToolRulesCheck.py:626
 msgid "Working..."
 msgstr ""
@@ -12458,13 +12464,13 @@ msgstr ""
 msgid "Geometry not supported for bounding box"
 msgstr ""
 
-#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1679 appTools/ToolNCC.py:1734
-#: appTools/ToolNCC.py:2674 appTools/ToolPaint.py:2457
+#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1681 appTools/ToolNCC.py:1736
+#: appTools/ToolNCC.py:2734 appTools/ToolPaint.py:2457
 msgid "No object available."
 msgstr ""
 
-#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1704 appTools/ToolNCC.py:1757
-#: appTools/ToolNCC.py:2716
+#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1706 appTools/ToolNCC.py:1759
+#: appTools/ToolNCC.py:2776
 msgid "The reference object type is not supported."
 msgstr ""
 
@@ -12512,7 +12518,7 @@ msgid ""
 msgstr ""
 
 #: appTools/ToolCopperThieving.py:1231 appTools/ToolIsolation.py:3385
-#: appTools/ToolNCC.py:4257 appTools/ToolPaint.py:3137
+#: appTools/ToolNCC.py:4317 appTools/ToolPaint.py:3137
 msgid "Ref. Type"
 msgstr ""
 
@@ -12523,12 +12529,12 @@ msgid ""
 msgstr ""
 
 #: appTools/ToolCopperThieving.py:1242 appTools/ToolIsolation.py:3396
-#: appTools/ToolNCC.py:4267 appTools/ToolPaint.py:3147
+#: appTools/ToolNCC.py:4327 appTools/ToolPaint.py:3147
 msgid "Ref. Object"
 msgstr ""
 
 #: appTools/ToolCopperThieving.py:1244 appTools/ToolIsolation.py:3398
-#: appTools/ToolNCC.py:4269 appTools/ToolPaint.py:3149
+#: appTools/ToolNCC.py:4329 appTools/ToolPaint.py:3149
 msgid "The FlatCAM object to be used as non copper clearing reference."
 msgstr ""
 
@@ -12640,20 +12646,20 @@ msgid "Will add corner markers to the selected Gerber file."
 msgstr ""
 
 #: appTools/ToolCutOut.py:281 appTools/ToolIsolation.py:791 appTools/ToolIsolation.py:1049
-#: appTools/ToolIsolation.py:1185 appTools/ToolNCC.py:463 appTools/ToolNCC.py:990
-#: appTools/ToolNCC.py:1128 appTools/ToolPaint.py:395 appTools/ToolPaint.py:686
+#: appTools/ToolIsolation.py:1185 appTools/ToolNCC.py:463 appTools/ToolNCC.py:992
+#: appTools/ToolNCC.py:1130 appTools/ToolPaint.py:395 appTools/ToolPaint.py:686
 #: appTools/ToolPaint.py:823 appTools/ToolSolderPaste.py:131 appTools/ToolSolderPaste.py:464
 #: app_Main.py:4490
 msgid "Please enter a tool diameter with non-zero value, in Float format."
 msgstr ""
 
-#: appTools/ToolCutOut.py:357 appTools/ToolIsolation.py:1130 appTools/ToolNCC.py:1073
+#: appTools/ToolCutOut.py:357 appTools/ToolIsolation.py:1130 appTools/ToolNCC.py:1075
 #: appTools/ToolPaint.py:767
 msgid "Tool not in Tools Database. Adding a default tool."
 msgstr ""
 
 #: appTools/ToolCutOut.py:364 appTools/ToolDrilling.py:955 appTools/ToolIsolation.py:1137
-#: appTools/ToolNCC.py:1080 appTools/ToolPaint.py:775
+#: appTools/ToolNCC.py:1082 appTools/ToolPaint.py:775
 msgid ""
 "Cancelled.\n"
 "Multiple tools for one tool diameter found in Tools Database."
@@ -12667,7 +12673,7 @@ msgstr ""
 msgid "Default tool added."
 msgstr ""
 
-#: appTools/ToolCutOut.py:466 appTools/ToolIsolation.py:2577 appTools/ToolNCC.py:3649
+#: appTools/ToolCutOut.py:466 appTools/ToolIsolation.py:2577 appTools/ToolNCC.py:3709
 #: appTools/ToolPaint.py:2620
 msgid "Selected tool can't be used here. Pick another."
 msgstr ""
@@ -12708,8 +12714,8 @@ msgstr ""
 #: appTools/ToolCutOut.py:921 appTools/ToolDrilling.py:1586
 #: appTools/ToolEtchCompensation.py:158 appTools/ToolInvertGerber.py:105
 #: appTools/ToolIsolation.py:912 appTools/ToolIsolation.py:1349
-#: appTools/ToolIsolation.py:1376 appTools/ToolMilling.py:1326 appTools/ToolNCC.py:848
-#: appTools/ToolNCC.py:1310 appTools/ToolPaint.py:1003 appTools/ToolPanelize.py:196
+#: appTools/ToolIsolation.py:1376 appTools/ToolMilling.py:1326 appTools/ToolNCC.py:850
+#: appTools/ToolNCC.py:1312 appTools/ToolPaint.py:1003 appTools/ToolPanelize.py:196
 #: tclCommands/TclCommandBbox.py:71 tclCommands/TclCommandNregions.py:71
 msgid "Object not found"
 msgstr ""
@@ -12794,7 +12800,7 @@ msgid ""
 "of objects that will populate the 'Object' combobox."
 msgstr ""
 
-#: appTools/ToolCutOut.py:2074 appTools/ToolIsolation.py:3125 appTools/ToolNCC.py:3939
+#: appTools/ToolCutOut.py:2074 appTools/ToolIsolation.py:3125 appTools/ToolNCC.py:3999
 #: appTools/ToolPaint.py:2901
 msgid ""
 "Add a new tool to the Tool Table\n"
@@ -13825,19 +13831,19 @@ msgstr ""
 msgid "Adding Tool cancelled"
 msgstr ""
 
-#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:879 appTools/ToolOptimal.py:179
+#: appTools/ToolIsolation.py:941 appTools/ToolNCC.py:881 appTools/ToolOptimal.py:179
 msgid ""
 "The Gerber object has one Polygon as geometry.\n"
 "There are no distances between geometry elements to be found."
 msgstr ""
 
-#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:924
+#: appTools/ToolIsolation.py:988 appTools/ToolNCC.py:926
 msgid "Optimal tool diameter found"
 msgstr ""
 
 #: appTools/ToolIsolation.py:1000 appTools/ToolIsolation.py:1508
-#: appTools/ToolIsolation.py:1710 appTools/ToolIsolation.py:1897 appTools/ToolNCC.py:935
-#: appTools/ToolNCC.py:1343 appTools/ToolPaint.py:1031 appTools/ToolPaint.py:1744
+#: appTools/ToolIsolation.py:1710 appTools/ToolIsolation.py:1897 appTools/ToolNCC.py:937
+#: appTools/ToolNCC.py:1345 appTools/ToolPaint.py:1031 appTools/ToolPaint.py:1744
 msgid "There are no tools selected in the Tool Table."
 msgstr ""
 
@@ -13846,35 +13852,35 @@ msgid "Incomplete isolation. At least one tool could not do a complete isolation
 msgstr ""
 
 #: appTools/ToolIsolation.py:1057 appTools/ToolIsolation.py:1144
-#: appTools/ToolIsolation.py:1206 appTools/ToolIsolation.py:2626 appTools/ToolNCC.py:999
-#: appTools/ToolNCC.py:1087 appTools/ToolNCC.py:1149 appTools/ToolNCC.py:3698
+#: appTools/ToolIsolation.py:1206 appTools/ToolIsolation.py:2626 appTools/ToolNCC.py:1001
+#: appTools/ToolNCC.py:1089 appTools/ToolNCC.py:1151 appTools/ToolNCC.py:3758
 #: appTools/ToolPaint.py:694 appTools/ToolPaint.py:782 appTools/ToolPaint.py:844
 #: appTools/ToolPaint.py:2676 appTools/ToolSolderPaste.py:488
 msgid "Cancelled. Tool already in Tool Table."
 msgstr ""
 
-#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1115 appTools/ToolPaint.py:810
+#: appTools/ToolIsolation.py:1172 appTools/ToolNCC.py:1117 appTools/ToolPaint.py:810
 msgid "New tool added to Tool Table from Tools Database."
 msgstr ""
 
-#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1179 appTools/ToolPaint.py:873
+#: appTools/ToolIsolation.py:1236 appTools/ToolNCC.py:1181 appTools/ToolPaint.py:873
 msgid "Default tool added to Tool Table."
 msgstr ""
 
-#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1205 appTools/ToolPaint.py:898
+#: appTools/ToolIsolation.py:1262 appTools/ToolNCC.py:1207 appTools/ToolPaint.py:898
 msgid "Tool from Tool Table was edited."
 msgstr ""
 
-#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1218 appTools/ToolPaint.py:911
+#: appTools/ToolIsolation.py:1275 appTools/ToolNCC.py:1220 appTools/ToolPaint.py:911
 #: appTools/ToolSolderPaste.py:548
 msgid "Cancelled. New diameter value is already in the Tool Table."
 msgstr ""
 
-#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1269 appTools/ToolPaint.py:961
+#: appTools/ToolIsolation.py:1326 appTools/ToolNCC.py:1271 appTools/ToolPaint.py:961
 msgid "Delete failed. Select a tool to delete."
 msgstr ""
 
-#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1275 appTools/ToolPaint.py:967
+#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1277 appTools/ToolPaint.py:967
 msgid "Tool(s) deleted from Tool Table."
 msgstr ""
 
@@ -13956,12 +13962,12 @@ msgstr ""
 msgid "Click the end point of the paint area."
 msgstr ""
 
-#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3662 appTools/ToolPaint.py:2633
+#: appTools/ToolIsolation.py:2590 appTools/ToolNCC.py:3722 appTools/ToolPaint.py:2633
 #: app_Main.py:5773 app_Main.py:5783
 msgid "Tool from DB added in Tool Table."
 msgstr ""
 
-#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3715 appTools/ToolPaint.py:2693
+#: appTools/ToolIsolation.py:2644 appTools/ToolNCC.py:3775 appTools/ToolPaint.py:2693
 msgid "New tool added to Tool Table."
 msgstr ""
 
@@ -13969,7 +13975,7 @@ msgstr ""
 msgid "Gerber object for isolation routing."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3815
+#: appTools/ToolIsolation.py:3012 appTools/ToolNCC.py:3875
 msgid ""
 "Tools pool from which the algorithm\n"
 "will pick the ones used for copper clearing."
@@ -13985,13 +13991,13 @@ msgid ""
 "this function will not be able to create routing geometry."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3839
+#: appTools/ToolIsolation.py:3036 appTools/ToolNCC.py:3899
 msgid ""
 "Tool Diameter. It's value (in current FlatCAM units)\n"
 "is the cut width into the material."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3843
+#: appTools/ToolIsolation.py:3040 appTools/ToolNCC.py:3903
 msgid ""
 "The Tool Type (TT) can be:\n"
 "- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
@@ -14006,17 +14012,17 @@ msgid ""
 "in the resulting geometry as Isolation."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3923
+#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3983
 msgid "Optimal"
 msgstr ""
 
-#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3927
+#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:3987
 msgid ""
 "Find a tool diameter that is guaranteed\n"
 "to do a complete isolation."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:3967 appTools/ToolPaint.py:2929
+#: appTools/ToolIsolation.py:3153 appTools/ToolNCC.py:4027 appTools/ToolPaint.py:2929
 #: appTools/ToolSolderPaste.py:1211
 msgid ""
 "Delete a selection of tools in the Tool Table\n"
@@ -14035,7 +14041,7 @@ msgstr ""
 msgid "Object whose area will be removed from isolation geometry."
 msgstr ""
 
-#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4259
+#: appTools/ToolIsolation.py:3387 appTools/ToolNCC.py:4319
 msgid ""
 "The type of FlatCAM object to be used as non copper clearing reference.\n"
 "It can be Gerber, Excellon or Geometry."
@@ -14104,151 +14110,151 @@ msgstr ""
 msgid "Error when mouse left click."
 msgstr ""
 
-#: appTools/ToolNCC.py:835
+#: appTools/ToolNCC.py:837
 msgid "NCC Tool. Checking tools for validity."
 msgstr ""
 
-#: appTools/ToolNCC.py:947
+#: appTools/ToolNCC.py:949
 msgid "Incomplete isolation. None of the selected tools could do a complete isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:950
+#: appTools/ToolNCC.py:952
 msgid "At least one of the selected tools can do a complete isolation."
 msgstr ""
 
-#: appTools/ToolNCC.py:1722 appTools/ToolNCC.py:2646
+#: appTools/ToolNCC.py:1724 appTools/ToolNCC.py:2706
 msgid "NCC Tool. Preparing non-copper polygons."
 msgstr ""
 
-#: appTools/ToolNCC.py:1782 appTools/ToolNCC.py:2774
+#: appTools/ToolNCC.py:1784 appTools/ToolNCC.py:2834
 msgid "NCC Tool. Calculate 'empty' area."
 msgstr ""
 
-#: appTools/ToolNCC.py:1793 appTools/ToolNCC.py:1822 appTools/ToolNCC.py:1928
-#: appTools/ToolNCC.py:1941 appTools/ToolNCC.py:2787 appTools/ToolNCC.py:2892
-#: appTools/ToolNCC.py:2907 appTools/ToolNCC.py:3173 appTools/ToolNCC.py:3274
-#: appTools/ToolNCC.py:3289
+#: appTools/ToolNCC.py:1795 appTools/ToolNCC.py:1824 appTools/ToolNCC.py:1930
+#: appTools/ToolNCC.py:1943 appTools/ToolNCC.py:2847 appTools/ToolNCC.py:2952
+#: appTools/ToolNCC.py:2967 appTools/ToolNCC.py:3233 appTools/ToolNCC.py:3334
+#: appTools/ToolNCC.py:3349
 msgid "Buffering finished"
 msgstr ""
 
-#: appTools/ToolNCC.py:1797 appTools/ToolNCC.py:1826 appTools/ToolNCC.py:1932
-#: appTools/ToolNCC.py:1944 appTools/ToolNCC.py:2795 appTools/ToolNCC.py:2914
-#: appTools/ToolNCC.py:3180 appTools/ToolNCC.py:3296
+#: appTools/ToolNCC.py:1799 appTools/ToolNCC.py:1828 appTools/ToolNCC.py:1934
+#: appTools/ToolNCC.py:1946 appTools/ToolNCC.py:2855 appTools/ToolNCC.py:2974
+#: appTools/ToolNCC.py:3240 appTools/ToolNCC.py:3356
 msgid "Could not get the extent of the area to be non copper cleared."
 msgstr ""
 
-#: appTools/ToolNCC.py:1805 appTools/ToolNCC.py:1955 appTools/ToolNCC.py:2925
+#: appTools/ToolNCC.py:1807 appTools/ToolNCC.py:1957 appTools/ToolNCC.py:2985
 msgid "NCC Tool. Finished calculation of 'empty' area."
 msgstr ""
 
-#: appTools/ToolNCC.py:1858 appTools/ToolNCC.py:2822 appTools/ToolNCC.py:2899
-#: appTools/ToolNCC.py:3200 appTools/ToolNCC.py:3281
+#: appTools/ToolNCC.py:1860 appTools/ToolNCC.py:2882 appTools/ToolNCC.py:2959
+#: appTools/ToolNCC.py:3260 appTools/ToolNCC.py:3341
 msgid "Isolation geometry is broken. Margin is less than isolation tool diameter."
 msgstr ""
 
-#: appTools/ToolNCC.py:1948 appTools/ToolNCC.py:2918 appTools/ToolNCC.py:3299
+#: appTools/ToolNCC.py:1950 appTools/ToolNCC.py:2978 appTools/ToolNCC.py:3359
 msgid "The selected object is not suitable for copper clearing."
 msgstr ""
 
-#: appTools/ToolNCC.py:1998
+#: appTools/ToolNCC.py:2000
 msgid "Clearing the polygon with the method: lines."
 msgstr ""
 
-#: appTools/ToolNCC.py:2008
+#: appTools/ToolNCC.py:2010
 msgid "Failed. Clearing the polygon with the method: seed."
 msgstr ""
 
-#: appTools/ToolNCC.py:2017
+#: appTools/ToolNCC.py:2019
 msgid "Failed. Clearing the polygon with the method: standard."
 msgstr ""
 
-#: appTools/ToolNCC.py:2033
+#: appTools/ToolNCC.py:2035
 msgid "Polygon could not be cleared. Location:"
 msgstr ""
 
-#: appTools/ToolNCC.py:2065 appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2595
-#: appTools/ToolNCC.py:2597
+#: appTools/ToolNCC.py:2067 appTools/ToolNCC.py:2069 appTools/ToolNCC.py:2655
+#: appTools/ToolNCC.py:2657
 msgid "Non-Copper clearing ..."
 msgstr ""
 
-#: appTools/ToolNCC.py:2086
+#: appTools/ToolNCC.py:2088
 msgid "There is no copper clearing tool in the selection and at least one is needed."
 msgstr ""
 
-#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2742
+#: appTools/ToolNCC.py:2103 appTools/ToolNCC.py:2802
 msgid "NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
 msgstr ""
 
-#: appTools/ToolNCC.py:2129 appTools/ToolNCC.py:2363
+#: appTools/ToolNCC.py:2131 appTools/ToolNCC.py:2365
 msgid "NCC Tool failed creating bounding box."
 msgstr ""
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "NCC Tool clearing with tool diameter"
 msgstr ""
 
-#: appTools/ToolNCC.py:2149 appTools/ToolNCC.py:2399 appTools/ToolNCC.py:2938
-#: appTools/ToolNCC.py:3324
+#: appTools/ToolNCC.py:2151 appTools/ToolNCC.py:2408 appTools/ToolNCC.py:2998
+#: appTools/ToolNCC.py:3384
 msgid "started."
 msgstr ""
 
-#: appTools/ToolNCC.py:2277
+#: appTools/ToolNCC.py:2279
 msgid "Could not use the tool for copper clear."
 msgstr ""
 
-#: appTools/ToolNCC.py:2299 appTools/ToolNCC.py:3099
+#: appTools/ToolNCC.py:2301 appTools/ToolNCC.py:3159
 msgid ""
 "There is no NCC Geometry in the file.\n"
 "Usually it means that the tool diameter is too big for the painted geometry.\n"
 "Change the painting parameters and try again."
 msgstr ""
 
-#: appTools/ToolNCC.py:2309 appTools/ToolNCC.py:3108
+#: appTools/ToolNCC.py:2311 appTools/ToolNCC.py:3168
 msgid "NCC Tool clear all done."
 msgstr ""
 
-#: appTools/ToolNCC.py:2312 appTools/ToolNCC.py:3111
+#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:3171
 msgid "NCC Tool clear all done but the copper features isolation is broken for"
 msgstr ""
 
-#: appTools/ToolNCC.py:2314 appTools/ToolNCC.py:2510 appTools/ToolNCC.py:3113
-#: appTools/ToolNCC.py:3496
+#: appTools/ToolNCC.py:2316 appTools/ToolNCC.py:2570 appTools/ToolNCC.py:3173
+#: appTools/ToolNCC.py:3556
 msgid "tools"
 msgstr ""
 
-#: appTools/ToolNCC.py:2341
+#: appTools/ToolNCC.py:2343
 msgid "NCC Tool. Rest machining copper clearing task started."
 msgstr ""
 
-#: appTools/ToolNCC.py:2506 appTools/ToolNCC.py:3492
+#: appTools/ToolNCC.py:2566 appTools/ToolNCC.py:3552
 msgid "NCC Tool Rest Machining clear all done."
 msgstr ""
 
-#: appTools/ToolNCC.py:2509 appTools/ToolNCC.py:3495
+#: appTools/ToolNCC.py:2569 appTools/ToolNCC.py:3555
 msgid ""
 "NCC Tool Rest Machining clear all done but the copper features isolation is broken for"
 msgstr ""
 
-#: appTools/ToolNCC.py:2607
+#: appTools/ToolNCC.py:2667
 msgid "NCC Tool started. Reading parameters."
 msgstr ""
 
-#: appTools/ToolNCC.py:3594
+#: appTools/ToolNCC.py:3654
 msgid ""
 "Try to use the Buffering Type = Full in Preferences -> Gerber General. Reload the Gerber "
 "file after this change."
 msgstr ""
 
-#: appTools/ToolNCC.py:3750
+#: appTools/ToolNCC.py:3810
 msgid "Non-Copper Clearing"
 msgstr ""
 
-#: appTools/ToolNCC.py:3779 appTools/ToolPaint.py:2765
+#: appTools/ToolNCC.py:3839 appTools/ToolPaint.py:2765
 msgid "Obj Type"
 msgstr ""
 
-#: appTools/ToolNCC.py:3781
+#: appTools/ToolNCC.py:3841
 msgid ""
 "Specify the type of object to be cleared of excess copper.\n"
 "It can be of type: Gerber or Geometry.\n"
@@ -14256,11 +14262,11 @@ msgid ""
 "of objects that will populate the 'Object' combobox."
 msgstr ""
 
-#: appTools/ToolNCC.py:3803
+#: appTools/ToolNCC.py:3863
 msgid "Object to be cleared of excess copper."
 msgstr ""
 
-#: appTools/ToolNCC.py:3831
+#: appTools/ToolNCC.py:3891
 msgid ""
 "This is the Tool Number.\n"
 "Non copper clearing will start with the tool with the biggest \n"
@@ -15192,6 +15198,10 @@ msgstr ""
 msgid "...processing..."
 msgstr ""
 
+#: appTools/ToolShell.py:293
+msgid "FlatCAM Shell"
+msgstr ""
+
 #: appTools/ToolSolderPaste.py:459
 msgid "Please enter a tool diameter to add, in Float format."
 msgstr ""
@@ -15700,6 +15710,10 @@ msgid ""
 "Edit only one geometry at a time."
 msgstr ""
 
+#: app_Main.py:2261
+msgid "EDITOR Area"
+msgstr ""
+
 #: app_Main.py:2263
 msgid "Editor is activated ..."
 msgstr ""