- created a new category in Preferences where only the Engraving Related preferences are located
- added a new set of options in the Preferences for the Milling Plugin by taking them out of the Geometry section
This commit is contained in:
Marius Stanciu
526
appGUI/preferences/tools/ToolsMillPrefGroupUI.py
Normal file
526
appGUI/preferences/tools/ToolsMillPrefGroupUI.py
Normal file
@@ -0,0 +1,526 @@
|
||||
from PyQt5 import QtWidgets
|
||||
from PyQt5.QtCore import Qt
|
||||
|
||||
from appGUI.GUIElements import RadioSet, FCDoubleSpinner, FCComboBox, FCCheckBox, FCSpinner, NumericalEvalTupleEntry, \
|
||||
OptionalInputSection, NumericalEvalEntry, FCLabel, FCComboBox2, FCEntry
|
||||
from appGUI.preferences.OptionsGroupUI import OptionsGroupUI
|
||||
|
||||
import gettext
|
||||
import appTranslation as fcTranslate
|
||||
import builtins
|
||||
|
||||
fcTranslate.apply_language('strings')
|
||||
if '_' not in builtins.__dict__:
|
||||
_ = gettext.gettext
|
||||
|
||||
|
||||
class ToolsMillPrefGroupUI(OptionsGroupUI):
|
||||
def __init__(self, decimals=4, parent=None):
|
||||
super(ToolsMillPrefGroupUI, self).__init__(self, parent=parent)
|
||||
|
||||
self.setTitle(str(_("Milling Plugin")))
|
||||
self.decimals = decimals
|
||||
|
||||
# ## Clear non-copper regions
|
||||
self.mill_label = FCLabel("<b>%s:</b>" % _("Parameters"))
|
||||
self.mill_label.setToolTip(
|
||||
_("Create CNCJob with toolpaths for milling either Geometry or drill holes.")
|
||||
)
|
||||
self.layout.addWidget(self.mill_label)
|
||||
|
||||
grid0 = QtWidgets.QGridLayout()
|
||||
self.layout.addLayout(grid0)
|
||||
|
||||
# Tooldia
|
||||
tdlabel = FCLabel('<b><font color="green">%s:</font></b>' % _('Tools Dia'))
|
||||
tdlabel.setToolTip(
|
||||
_("Diameters of the tools, separated by comma.\n"
|
||||
"The value of the diameter has to use the dot decimals separator.\n"
|
||||
"Valid values: 0.3, 1.0")
|
||||
)
|
||||
self.cnctooldia_entry = FCEntry()
|
||||
|
||||
grid0.addWidget(tdlabel, 0, 0)
|
||||
grid0.addWidget(self.cnctooldia_entry, 0, 1)
|
||||
|
||||
# Cut Z
|
||||
cutzlabel = FCLabel('%s:' % _('Cut Z'))
|
||||
cutzlabel.setToolTip(
|
||||
_("Cutting depth (negative)\n"
|
||||
"below the copper surface.")
|
||||
)
|
||||
self.cutz_entry = FCDoubleSpinner()
|
||||
self.cutz_entry.set_range(-10000.0000, 10000.0000)
|
||||
|
||||
self.cutz_entry.set_precision(self.decimals)
|
||||
self.cutz_entry.setSingleStep(0.1)
|
||||
self.cutz_entry.setWrapping(True)
|
||||
|
||||
grid0.addWidget(cutzlabel, 1, 0)
|
||||
grid0.addWidget(self.cutz_entry, 1, 1)
|
||||
|
||||
# Multidepth CheckBox
|
||||
self.multidepth_cb = FCCheckBox(label=_('Multi-Depth'))
|
||||
self.multidepth_cb.setToolTip(
|
||||
_(
|
||||
"Use multiple passes to limit\n"
|
||||
"the cut depth in each pass. Will\n"
|
||||
"cut multiple times until Cut Z is\n"
|
||||
"reached."
|
||||
)
|
||||
)
|
||||
grid0.addWidget(self.multidepth_cb, 2, 0)
|
||||
|
||||
# Depth/pass
|
||||
dplabel = FCLabel('%s:' % _('Depth/Pass'))
|
||||
dplabel.setToolTip(
|
||||
_("The depth to cut on each pass,\n"
|
||||
"when multidepth is enabled.\n"
|
||||
"It has positive value although\n"
|
||||
"it is a fraction from the depth\n"
|
||||
"which has negative value.")
|
||||
)
|
||||
|
||||
self.depthperpass_entry = FCDoubleSpinner()
|
||||
self.depthperpass_entry.set_range(0, 99999)
|
||||
self.depthperpass_entry.set_precision(self.decimals)
|
||||
self.depthperpass_entry.setSingleStep(0.1)
|
||||
self.depthperpass_entry.setWrapping(True)
|
||||
|
||||
grid0.addWidget(dplabel, 4, 0)
|
||||
grid0.addWidget(self.depthperpass_entry, 4, 1)
|
||||
|
||||
self.ois_multidepth = OptionalInputSection(self.multidepth_cb, [self.depthperpass_entry])
|
||||
|
||||
# Travel Z
|
||||
travelzlabel = FCLabel('%s:' % _('Travel Z'))
|
||||
travelzlabel.setToolTip(
|
||||
_("Height of the tool when\n"
|
||||
"moving without cutting.")
|
||||
)
|
||||
self.travelz_entry = FCDoubleSpinner()
|
||||
self.travelz_entry.set_range(-10000.0000, 10000.0000)
|
||||
|
||||
self.travelz_entry.set_precision(self.decimals)
|
||||
self.travelz_entry.setSingleStep(0.1)
|
||||
self.travelz_entry.setWrapping(True)
|
||||
|
||||
grid0.addWidget(travelzlabel, 6, 0)
|
||||
grid0.addWidget(self.travelz_entry, 6, 1)
|
||||
|
||||
# Tool change:
|
||||
self.toolchange_cb = FCCheckBox('%s' % _("Tool change"))
|
||||
self.toolchange_cb.setToolTip(
|
||||
_(
|
||||
"Include tool-change sequence\n"
|
||||
"in the Machine Code (Pause for tool change)."
|
||||
)
|
||||
)
|
||||
grid0.addWidget(self.toolchange_cb, 8, 0, 1, 2)
|
||||
|
||||
# Toolchange Z
|
||||
toolchangezlabel = FCLabel('%s:' % _('Toolchange Z'))
|
||||
toolchangezlabel.setToolTip(
|
||||
_(
|
||||
"Z-axis position (height) for\n"
|
||||
"tool change."
|
||||
)
|
||||
)
|
||||
self.toolchangez_entry = FCDoubleSpinner()
|
||||
self.toolchangez_entry.set_range(-10000.0000, 10000.0000)
|
||||
|
||||
self.toolchangez_entry.set_precision(self.decimals)
|
||||
self.toolchangez_entry.setSingleStep(0.1)
|
||||
self.toolchangez_entry.setWrapping(True)
|
||||
|
||||
grid0.addWidget(toolchangezlabel, 10, 0)
|
||||
grid0.addWidget(self.toolchangez_entry, 10, 1)
|
||||
|
||||
# End move Z
|
||||
endz_label = FCLabel('%s:' % _('End move Z'))
|
||||
endz_label.setToolTip(
|
||||
_("Height of the tool after\n"
|
||||
"the last move at the end of the job.")
|
||||
)
|
||||
self.endz_entry = FCDoubleSpinner()
|
||||
self.endz_entry.set_range(-10000.0000, 10000.0000)
|
||||
|
||||
self.endz_entry.set_precision(self.decimals)
|
||||
self.endz_entry.setSingleStep(0.1)
|
||||
self.endz_entry.setWrapping(True)
|
||||
|
||||
grid0.addWidget(endz_label, 12, 0)
|
||||
grid0.addWidget(self.endz_entry, 12, 1)
|
||||
|
||||
# End Move X,Y
|
||||
endmove_xy_label = FCLabel('%s:' % _('End move X,Y'))
|
||||
endmove_xy_label.setToolTip(
|
||||
_("End move X,Y position. In format (x,y).\n"
|
||||
"If no value is entered then there is no move\n"
|
||||
"on X,Y plane at the end of the job.")
|
||||
)
|
||||
self.endxy_entry = NumericalEvalTupleEntry(border_color='#0069A9')
|
||||
|
||||
grid0.addWidget(endmove_xy_label, 14, 0)
|
||||
grid0.addWidget(self.endxy_entry, 14, 1)
|
||||
|
||||
# Feedrate X-Y
|
||||
frlabel = FCLabel('%s:' % _('Feedrate X-Y'))
|
||||
frlabel.setToolTip(
|
||||
_("Cutting speed in the XY\n"
|
||||
"plane in units per minute")
|
||||
)
|
||||
self.cncfeedrate_entry = FCDoubleSpinner()
|
||||
self.cncfeedrate_entry.set_range(0, 910000.0000)
|
||||
self.cncfeedrate_entry.set_precision(self.decimals)
|
||||
self.cncfeedrate_entry.setSingleStep(0.1)
|
||||
self.cncfeedrate_entry.setWrapping(True)
|
||||
|
||||
grid0.addWidget(frlabel, 16, 0)
|
||||
grid0.addWidget(self.cncfeedrate_entry, 16, 1)
|
||||
|
||||
# Feedrate Z (Plunge)
|
||||
frz_label = FCLabel('%s:' % _('Feedrate Z'))
|
||||
frz_label.setToolTip(
|
||||
_("Cutting speed in the XY\n"
|
||||
"plane in units per minute.\n"
|
||||
"It is called also Plunge.")
|
||||
)
|
||||
self.feedrate_z_entry = FCDoubleSpinner()
|
||||
self.feedrate_z_entry.set_range(0, 910000.0000)
|
||||
self.feedrate_z_entry.set_precision(self.decimals)
|
||||
self.feedrate_z_entry.setSingleStep(0.1)
|
||||
self.feedrate_z_entry.setWrapping(True)
|
||||
|
||||
grid0.addWidget(frz_label, 18, 0)
|
||||
grid0.addWidget(self.feedrate_z_entry, 18, 1)
|
||||
|
||||
# Spindle Speed
|
||||
spdlabel = FCLabel('%s:' % _('Spindle speed'))
|
||||
spdlabel.setToolTip(
|
||||
_(
|
||||
"Speed of the spindle in RPM (optional).\n"
|
||||
"If LASER preprocessor is used,\n"
|
||||
"this value is the power of laser."
|
||||
)
|
||||
)
|
||||
self.cncspindlespeed_entry = FCSpinner()
|
||||
self.cncspindlespeed_entry.set_range(0, 1000000)
|
||||
self.cncspindlespeed_entry.set_step(100)
|
||||
|
||||
grid0.addWidget(spdlabel, 20, 0)
|
||||
grid0.addWidget(self.cncspindlespeed_entry, 20, 1)
|
||||
|
||||
# Dwell
|
||||
self.dwell_cb = FCCheckBox(label='%s' % _('Enable Dwell'))
|
||||
self.dwell_cb.setToolTip(
|
||||
_("Pause to allow the spindle to reach its\n"
|
||||
"speed before cutting.")
|
||||
)
|
||||
dwelltime = FCLabel('%s:' % _('Duration'))
|
||||
dwelltime.setToolTip(
|
||||
_("Number of time units for spindle to dwell.")
|
||||
)
|
||||
self.dwelltime_entry = FCDoubleSpinner()
|
||||
self.dwelltime_entry.set_range(0, 99999)
|
||||
self.dwelltime_entry.set_precision(self.decimals)
|
||||
self.dwelltime_entry.setSingleStep(0.1)
|
||||
self.dwelltime_entry.setWrapping(True)
|
||||
|
||||
grid0.addWidget(self.dwell_cb, 22, 0)
|
||||
grid0.addWidget(dwelltime, 24, 0)
|
||||
grid0.addWidget(self.dwelltime_entry, 24, 1)
|
||||
|
||||
self.ois_dwell = OptionalInputSection(self.dwell_cb, [self.dwelltime_entry])
|
||||
|
||||
# preprocessor selection
|
||||
pp_label = FCLabel('%s:' % _("Preprocessor"))
|
||||
pp_label.setToolTip(
|
||||
_("The Preprocessor file that dictates\n"
|
||||
"the Machine Code (like GCode, RML, HPGL) output.")
|
||||
)
|
||||
self.pp_geometry_name_cb = FCComboBox()
|
||||
self.pp_geometry_name_cb.setFocusPolicy(Qt.StrongFocus)
|
||||
self.pp_geometry_name_cb.setSizePolicy(QtWidgets.QSizePolicy.MinimumExpanding, QtWidgets.QSizePolicy.Preferred)
|
||||
|
||||
grid0.addWidget(pp_label, 26, 0)
|
||||
grid0.addWidget(self.pp_geometry_name_cb, 26, 1)
|
||||
|
||||
separator_line = QtWidgets.QFrame()
|
||||
separator_line.setFrameShape(QtWidgets.QFrame.HLine)
|
||||
separator_line.setFrameShadow(QtWidgets.QFrame.Sunken)
|
||||
grid0.addWidget(separator_line, 28, 0, 1, 2)
|
||||
|
||||
# Toolchange X,Y
|
||||
toolchange_xy_label = FCLabel('%s:' % _('Toolchange X-Y'))
|
||||
toolchange_xy_label.setToolTip(
|
||||
_("Toolchange X,Y position.")
|
||||
)
|
||||
self.toolchangexy_entry = NumericalEvalTupleEntry(border_color='#0069A9')
|
||||
|
||||
grid0.addWidget(toolchange_xy_label, 30, 0)
|
||||
grid0.addWidget(self.toolchangexy_entry, 30, 1)
|
||||
|
||||
# Start move Z
|
||||
startzlabel = FCLabel('%s:' % _('Start Z'))
|
||||
startzlabel.setToolTip(
|
||||
_("Height of the tool just after starting the work.\n"
|
||||
"Delete the value if you don't need this feature.")
|
||||
)
|
||||
self.gstartz_entry = NumericalEvalEntry(border_color='#0069A9')
|
||||
|
||||
grid0.addWidget(startzlabel, 32, 0)
|
||||
grid0.addWidget(self.gstartz_entry, 32, 1)
|
||||
|
||||
# Feedrate rapids
|
||||
fr_rapid_label = FCLabel('%s:' % _('Feedrate Rapids'))
|
||||
fr_rapid_label.setToolTip(
|
||||
_("Cutting speed in the XY plane\n"
|
||||
"(in units per minute).\n"
|
||||
"This is for the rapid move G00.\n"
|
||||
"It is useful only for Marlin,\n"
|
||||
"ignore for any other cases.")
|
||||
)
|
||||
self.feedrate_rapid_entry = FCDoubleSpinner()
|
||||
self.feedrate_rapid_entry.set_range(0, 910000.0000)
|
||||
self.feedrate_rapid_entry.set_precision(self.decimals)
|
||||
self.feedrate_rapid_entry.setSingleStep(0.1)
|
||||
self.feedrate_rapid_entry.setWrapping(True)
|
||||
|
||||
grid0.addWidget(fr_rapid_label, 34, 0)
|
||||
grid0.addWidget(self.feedrate_rapid_entry, 34, 1)
|
||||
|
||||
# End move extra cut
|
||||
self.extracut_cb = FCCheckBox('%s' % _('Re-cut'))
|
||||
self.extracut_cb.setToolTip(
|
||||
_("In order to remove possible\n"
|
||||
"copper leftovers where first cut\n"
|
||||
"meet with last cut, we generate an\n"
|
||||
"extended cut over the first cut section.")
|
||||
)
|
||||
|
||||
self.e_cut_entry = FCDoubleSpinner()
|
||||
self.e_cut_entry.set_range(0, 99999)
|
||||
self.e_cut_entry.set_precision(self.decimals)
|
||||
self.e_cut_entry.setSingleStep(0.1)
|
||||
self.e_cut_entry.setWrapping(True)
|
||||
self.e_cut_entry.setToolTip(
|
||||
_("In order to remove possible\n"
|
||||
"copper leftovers where first cut\n"
|
||||
"meet with last cut, we generate an\n"
|
||||
"extended cut over the first cut section.")
|
||||
)
|
||||
grid0.addWidget(self.extracut_cb, 36, 0)
|
||||
grid0.addWidget(self.e_cut_entry, 36, 1)
|
||||
|
||||
# Probe depth
|
||||
self.pdepth_label = FCLabel('%s:' % _("Probe Z depth"))
|
||||
self.pdepth_label.setToolTip(
|
||||
_("The maximum depth that the probe is allowed\n"
|
||||
"to probe. Negative value, in current units.")
|
||||
)
|
||||
self.pdepth_entry = FCDoubleSpinner()
|
||||
self.pdepth_entry.set_range(-99999, 0.0000)
|
||||
self.pdepth_entry.set_precision(self.decimals)
|
||||
self.pdepth_entry.setSingleStep(0.1)
|
||||
self.pdepth_entry.setWrapping(True)
|
||||
|
||||
grid0.addWidget(self.pdepth_label, 38, 0)
|
||||
grid0.addWidget(self.pdepth_entry, 38, 1)
|
||||
|
||||
# Probe feedrate
|
||||
self.feedrate_probe_label = FCLabel('%s:' % _("Feedrate Probe"))
|
||||
self.feedrate_probe_label.setToolTip(
|
||||
_("The feedrate used while the probe is probing.")
|
||||
)
|
||||
self.feedrate_probe_entry = FCDoubleSpinner()
|
||||
self.feedrate_probe_entry.set_range(0, 910000.0000)
|
||||
self.feedrate_probe_entry.set_precision(self.decimals)
|
||||
self.feedrate_probe_entry.setSingleStep(0.1)
|
||||
self.feedrate_probe_entry.setWrapping(True)
|
||||
|
||||
grid0.addWidget(self.feedrate_probe_label, 40, 0)
|
||||
grid0.addWidget(self.feedrate_probe_entry, 40, 1)
|
||||
|
||||
# Spindle direction
|
||||
spindle_dir_label = FCLabel('%s:' % _('Spindle direction'))
|
||||
spindle_dir_label.setToolTip(
|
||||
_("This sets the direction that the spindle is rotating.\n"
|
||||
"It can be either:\n"
|
||||
"- CW = clockwise or\n"
|
||||
"- CCW = counter clockwise")
|
||||
)
|
||||
|
||||
self.spindledir_radio = RadioSet([{'label': _('CW'), 'value': 'CW'},
|
||||
{'label': _('CCW'), 'value': 'CCW'}])
|
||||
grid0.addWidget(spindle_dir_label, 42, 0)
|
||||
grid0.addWidget(self.spindledir_radio, 42, 1)
|
||||
|
||||
# Fast Move from Z Toolchange
|
||||
self.fplunge_cb = FCCheckBox('%s' % _('Fast Plunge'))
|
||||
self.fplunge_cb.setToolTip(
|
||||
_("By checking this, the vertical move from\n"
|
||||
"Z_Toolchange to Z_move is done with G0,\n"
|
||||
"meaning the fastest speed available.\n"
|
||||
"WARNING: the move is done at Toolchange X,Y coords.")
|
||||
)
|
||||
grid0.addWidget(self.fplunge_cb, 44, 0, 1, 2)
|
||||
|
||||
separator_line = QtWidgets.QFrame()
|
||||
separator_line.setFrameShape(QtWidgets.QFrame.HLine)
|
||||
separator_line.setFrameShadow(QtWidgets.QFrame.Sunken)
|
||||
grid0.addWidget(separator_line, 50, 0, 1, 2)
|
||||
|
||||
# -----------------------------
|
||||
# --- Area Exclusion ----------
|
||||
# -----------------------------
|
||||
self.area_exc_label = FCLabel('<b>%s:</b>' % _('Area Exclusion'))
|
||||
self.area_exc_label.setToolTip(
|
||||
_("Area exclusion parameters.")
|
||||
)
|
||||
grid0.addWidget(self.area_exc_label, 52, 0, 1, 2)
|
||||
|
||||
# Exclusion Area CB
|
||||
self.exclusion_cb = FCCheckBox('%s' % _("Exclusion areas"))
|
||||
self.exclusion_cb.setToolTip(
|
||||
_(
|
||||
"Include exclusion areas.\n"
|
||||
"In those areas the travel of the tools\n"
|
||||
"is forbidden."
|
||||
)
|
||||
)
|
||||
grid0.addWidget(self.exclusion_cb, 54, 0, 1, 2)
|
||||
|
||||
# Area Selection shape
|
||||
self.area_shape_label = FCLabel('%s:' % _("Shape"))
|
||||
self.area_shape_label.setToolTip(
|
||||
_("The kind of selection shape used for area selection.")
|
||||
)
|
||||
|
||||
self.area_shape_radio = RadioSet([{'label': _("Square"), 'value': 'square'},
|
||||
{'label': _("Polygon"), 'value': 'polygon'}])
|
||||
|
||||
grid0.addWidget(self.area_shape_label, 56, 0)
|
||||
grid0.addWidget(self.area_shape_radio, 56, 1)
|
||||
|
||||
# Chose Strategy
|
||||
self.strategy_label = FCLabel('%s:' % _("Strategy"))
|
||||
self.strategy_label.setToolTip(_("The strategy followed when encountering an exclusion area.\n"
|
||||
"Can be:\n"
|
||||
"- Over -> when encountering the area, the tool will go to a set height\n"
|
||||
"- Around -> will avoid the exclusion area by going around the area"))
|
||||
self.strategy_radio = RadioSet([{'label': _('Over'), 'value': 'over'},
|
||||
{'label': _('Around'), 'value': 'around'}])
|
||||
|
||||
grid0.addWidget(self.strategy_label, 58, 0)
|
||||
grid0.addWidget(self.strategy_radio, 58, 1)
|
||||
|
||||
# Over Z
|
||||
self.over_z_label = FCLabel('%s:' % _("Over Z"))
|
||||
self.over_z_label.setToolTip(_("The height Z to which the tool will rise in order to avoid\n"
|
||||
"an interdiction area."))
|
||||
self.over_z_entry = FCDoubleSpinner()
|
||||
self.over_z_entry.set_range(-10000.000, 10000.0000)
|
||||
self.over_z_entry.set_precision(self.decimals)
|
||||
|
||||
grid0.addWidget(self.over_z_label, 60, 0)
|
||||
grid0.addWidget(self.over_z_entry, 60, 1)
|
||||
|
||||
separator_line = QtWidgets.QFrame()
|
||||
separator_line.setFrameShape(QtWidgets.QFrame.HLine)
|
||||
separator_line.setFrameShadow(QtWidgets.QFrame.Sunken)
|
||||
grid0.addWidget(separator_line, 62, 0, 1, 2)
|
||||
|
||||
# -----------------------------
|
||||
# --- Area POLISH ----------
|
||||
# -----------------------------
|
||||
# Add Polish
|
||||
self.polish_cb = FCCheckBox(label=_('Add Polish'))
|
||||
self.polish_cb.setToolTip(_(
|
||||
"Will add a Paint section at the end of the GCode.\n"
|
||||
"A metallic brush will clean the material after milling."))
|
||||
grid0.addWidget(self.polish_cb, 64, 0, 1, 2)
|
||||
|
||||
# Polish Tool Diameter
|
||||
self.polish_dia_lbl = FCLabel('%s:' % _('Tool Dia'))
|
||||
self.polish_dia_lbl.setToolTip(
|
||||
_("Diameter for the polishing tool.")
|
||||
)
|
||||
self.polish_dia_entry = FCDoubleSpinner()
|
||||
self.polish_dia_entry.set_precision(self.decimals)
|
||||
self.polish_dia_entry.set_range(-10000.000, 10000.0000)
|
||||
|
||||
grid0.addWidget(self.polish_dia_lbl, 66, 0)
|
||||
grid0.addWidget(self.polish_dia_entry, 66, 1)
|
||||
|
||||
# Polish Travel Z
|
||||
self.polish_travelz_lbl = FCLabel('%s:' % _('Travel Z'))
|
||||
self.polish_travelz_lbl.setToolTip(
|
||||
_("Height of the tool when\n"
|
||||
"moving without cutting.")
|
||||
)
|
||||
self.polish_travelz_entry = FCDoubleSpinner()
|
||||
self.polish_travelz_entry.set_precision(self.decimals)
|
||||
self.polish_travelz_entry.set_range(0.00000, 10000.00000)
|
||||
self.polish_travelz_entry.setSingleStep(0.1)
|
||||
|
||||
grid0.addWidget(self.polish_travelz_lbl, 68, 0)
|
||||
grid0.addWidget(self.polish_travelz_entry, 68, 1)
|
||||
|
||||
# Polish Pressure
|
||||
self.polish_pressure_lbl = FCLabel('%s:' % _('Pressure'))
|
||||
self.polish_pressure_lbl.setToolTip(
|
||||
_("Negative value. The higher the absolute value\n"
|
||||
"the stronger the pressure of the brush on the material.")
|
||||
)
|
||||
self.polish_pressure_entry = FCDoubleSpinner()
|
||||
self.polish_pressure_entry.set_precision(self.decimals)
|
||||
self.polish_pressure_entry.set_range(-10000.0000, 10000.0000)
|
||||
|
||||
grid0.addWidget(self.polish_pressure_lbl, 70, 0)
|
||||
grid0.addWidget(self.polish_pressure_entry, 70, 1)
|
||||
|
||||
# Polish Margin
|
||||
self.polish_margin_lbl = FCLabel('%s:' % _('Margin'))
|
||||
self.polish_margin_lbl.setToolTip(
|
||||
_("Bounding box margin.")
|
||||
)
|
||||
self.polish_margin_entry = FCDoubleSpinner()
|
||||
self.polish_margin_entry.set_precision(self.decimals)
|
||||
self.polish_margin_entry.set_range(-10000.0000, 10000.0000)
|
||||
|
||||
grid0.addWidget(self.polish_margin_lbl, 72, 0)
|
||||
grid0.addWidget(self.polish_margin_entry, 72, 1)
|
||||
|
||||
# Polish Overlap
|
||||
self.polish_over_lbl = FCLabel('%s:' % _('Overlap'))
|
||||
self.polish_over_lbl.setToolTip(
|
||||
_("How much (percentage) of the tool width to overlap each tool pass.")
|
||||
)
|
||||
self.polish_over_entry = FCDoubleSpinner(suffix='%')
|
||||
self.polish_over_entry.set_precision(self.decimals)
|
||||
self.polish_over_entry.setWrapping(True)
|
||||
self.polish_over_entry.set_range(0.0000, 99.9999)
|
||||
self.polish_over_entry.setSingleStep(0.1)
|
||||
|
||||
grid0.addWidget(self.polish_over_lbl, 74, 0)
|
||||
grid0.addWidget(self.polish_over_entry, 74, 1)
|
||||
|
||||
# Polish Method
|
||||
self.polish_method_lbl = FCLabel('%s:' % _('Method'))
|
||||
self.polish_method_lbl.setToolTip(
|
||||
_("Algorithm for polishing:\n"
|
||||
"- Standard: Fixed step inwards.\n"
|
||||
"- Seed-based: Outwards from seed.\n"
|
||||
"- Line-based: Parallel lines.")
|
||||
)
|
||||
|
||||
self.polish_method_combo = FCComboBox2()
|
||||
self.polish_method_combo.addItems(
|
||||
[_("Standard"), _("Seed"), _("Lines")]
|
||||
)
|
||||
|
||||
grid0.addWidget(self.polish_method_lbl, 76, 0)
|
||||
grid0.addWidget(self.polish_method_combo, 76, 1)
|
||||
|
||||
self.layout.addStretch()
|
||||
Reference in New Issue
Block a user