diff --git a/CHANGELOG.md b/CHANGELOG.md index 374a79fa..ffbf7504 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -13,6 +13,7 @@ CHANGELOG for FlatCAM beta - Turkish and Chinese small updates - in Preferences the language names are in the native language - fixed a Qt6 derived issue where dragging tabs outside the app crashed the app +- updated the Chinese translation, by 俊霄 余 25.08.2021 diff --git a/locale/zh/LC_MESSAGES/strings.mo b/locale/zh/LC_MESSAGES/strings.mo index 348a878a..614cac78 100644 Binary files a/locale/zh/LC_MESSAGES/strings.mo and b/locale/zh/LC_MESSAGES/strings.mo differ diff --git a/locale/zh/LC_MESSAGES/strings.po b/locale/zh/LC_MESSAGES/strings.po index da3b5c07..ef527b27 100644 --- a/locale/zh/LC_MESSAGES/strings.po +++ b/locale/zh/LC_MESSAGES/strings.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "POT-Creation-Date: 2021-08-26 03:48+0300\n" -"PO-Revision-Date: 2021-08-26 03:49+0300\n" +"PO-Revision-Date: 2021-08-26 21:41+0800\n" "Last-Translator: \n" "Language-Team: \n" "Language: zh_CN\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Generated-By: pygettext.py 1.5\n" -"X-Generator: Poedit 3.0\n" +"X-Generator: Poedit 2.4\n" "Plural-Forms: nplurals=1; plural=0;\n" "X-Poedit-Basepath: ../../..\n" "X-Poedit-SearchPath-0: .\n" @@ -331,7 +331,7 @@ msgstr "钻孔参数" #: appDatabase.py:155 msgid "Cutout Parameters" -msgstr "剪切参数" +msgstr "切割参数" #: appDatabase.py:205 msgid "" @@ -421,7 +421,7 @@ msgstr "NCC" #: appGUI/ObjectUI.py:377 appPlugins/ToolCutOut.py:179 #: appPlugins/ToolCutOut.py:522 appPlugins/ToolCutOut.py:2286 msgid "Cutout" -msgstr "剪切" +msgstr "切割" #: appDatabase.py:287 appEditors/appGCodeEditor.py:804 appGUI/ObjectUI.py:999 #: appGUI/ObjectUI.py:1374 @@ -1198,7 +1198,7 @@ msgid "" "add a drill hole on the slot end point." msgstr "" "如果槽长度未完全被钻孔覆盖，\n" -"在插槽端点上添加钻孔。" +"在槽端点上添加钻孔。" #: appDatabase.py:1131 appGUI/preferences/tools/Tools2ExtractPrefGroupUI.py:254 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:109 @@ -1322,7 +1322,7 @@ msgstr "" "用于自动切断的间隙数。\n" "最多可以有8个桥/间隙。\n" "这些选择包括：\n" -"-None-：无差距\n" +"-None-：无间隙\n" "-lr-：左+右\n" "-tb-：顶部+底部\n" "-4-：左+右+上+下\n" @@ -1684,7 +1684,7 @@ msgstr "失败。" #: appEditors/AppExcEditor.py:660 msgid "To add a slot first select a tool" -msgstr "要添加插槽，请首先选择工具" +msgstr "要添加槽，请首先选择工具" #: appEditors/AppExcEditor.py:720 appEditors/AppExcEditor.py:727 #: appEditors/AppExcEditor.py:1082 appEditors/AppExcEditor.py:1089 @@ -1697,7 +1697,7 @@ msgstr "若要添加钻孔阵列，请首先在刀具表中选择一个刀具" #: appEditors/AppExcEditor.py:933 msgid "Click on the Slot Circular Array Start position" -msgstr "单击插槽圆形阵列的开始位置" +msgstr "单击槽圆形阵列的开始位置" #: appEditors/AppExcEditor.py:958 appEditors/AppGerberEditor.py:538 msgid "The value is mistyped. Check the value." @@ -1892,7 +1892,7 @@ msgstr "此Excellon对象中的刀具用于钻孔时。" #: appEditors/AppExcEditor.py:4039 msgid "Convert Slots" -msgstr "转换插槽" +msgstr "转换槽" #: appEditors/AppExcEditor.py:4043 msgid "Convert the slots in the selected tools to drills." @@ -2181,13 +2181,13 @@ msgstr "圆形组中每个元素的放置角度。" #: appEditors/AppExcEditor.py:4326 msgid "Slot Parameters" -msgstr "插槽参数" +msgstr "槽参数" #: appEditors/AppExcEditor.py:4328 msgid "" "Parameters for adding a slot (hole with oval shape)\n" "either single or as an part of an array." -msgstr "用于添加单个或作为阵列一部分的插槽（椭圆形孔）的参数。" +msgstr "用于添加单个或作为阵列一部分的槽（椭圆形孔）的参数。" #: appEditors/AppExcEditor.py:4334 appEditors/AppGeoEditor.py:3568 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:156 @@ -2200,7 +2200,7 @@ msgstr "长度" #: appEditors/AppExcEditor.py:4336 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:158 msgid "Length. The length of the slot." -msgstr "长度。插槽的长度。" +msgstr "长度。槽的长度。" #: appEditors/AppExcEditor.py:4350 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:174 @@ -2210,7 +2210,7 @@ msgid "" "- 'Y' - vertical axis or \n" "- 'Angle' - a custom angle for the slot inclination" msgstr "" -"插槽的定向方向：\n" +"槽的定向方向：\n" "-“X”-水平轴\n" "-“Y”-垂直轴或\n" "-“角度”-槽倾斜的自定义角度" @@ -2223,31 +2223,31 @@ msgid "" "Min value is: -360.00 degrees.\n" "Max value is: 360.00 degrees." msgstr "" -"插槽放置的角度。\n" +"槽放置的角度。\n" "精度最大为2位小数。\n" "最小值为：-360.00度。\n" "最大值为：360.00度。" #: appEditors/AppExcEditor.py:4400 msgid "Slot Array Parameters" -msgstr "插槽阵列参数" +msgstr "槽阵列参数" #: appEditors/AppExcEditor.py:4402 msgid "Parameters for the array of slots (linear or circular array)" -msgstr "插槽阵列的参数（线性或圆形阵列）" +msgstr "槽阵列的参数（线性或圆形阵列）" #: appEditors/AppExcEditor.py:4410 msgid "" "Select the type of slot array to create.\n" "It can be Linear X(Y) or Circular" msgstr "" -"选择要创建的插槽阵列的类型。\n" +"选择要创建的槽阵列的类型。\n" "它可以是线性X（Y）或圆形" #: appEditors/AppExcEditor.py:4422 #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:215 msgid "Specify how many slots to be in the array." -msgstr "指定阵列中的插槽数量。" +msgstr "指定阵列中的槽数量。" #: appEditors/AppExcEditor.py:4530 appEditors/AppGeoEditor.py:3646 #: appEditors/AppGerberEditor.py:6645 appEditors/appGCodeEditor.py:74 @@ -2870,7 +2870,7 @@ msgstr "" #: appPlugins/ToolMilling.py:4415 appPlugins/ToolPanelize.py:1187 #: appPlugins/ToolTransform.py:620 msgid "Object" -msgstr "目标" +msgstr "对象" #: appEditors/AppGeoEditor.py:1247 appEditors/AppGerberEditor.py:7201 #: appPlugins/ToolTransform.py:184 @@ -4130,7 +4130,7 @@ msgstr "钻孔" #: appPlugins/ToolMilling.py:3631 appPlugins/ToolMilling.py:3825 #: appPlugins/ToolReport.py:196 msgid "Slots" -msgstr "插槽" +msgstr "槽" #: appEditors/appGCodeEditor.py:837 appEditors/appGCodeEditor.py:859 msgid "CNC Code Snippet" @@ -4393,7 +4393,7 @@ msgstr "将运行打开的Tcl脚本，从而实现FlatCAM某些功能的自动 #: appGUI/GUIElements.py:5164 msgid "Toggle GUI ..." -msgstr "切换GUI" +msgstr "切换GUI..." #: appGUI/GUIElements.py:5166 msgid "Will show/hide the GUI." @@ -4440,7 +4440,7 @@ msgstr "退出" #: appGUI/MainGUI.py:73 appGUI/MainGUI.py:75 appGUI/MainGUI.py:1665 msgid "Toggle Panel" -msgstr "切换面板" +msgstr "切换拼板" #: appGUI/MainGUI.py:85 msgid "File" @@ -4789,7 +4789,7 @@ msgstr "" "- Gerber\n" "- Excellon\n" "- Geometry\n" -"进入一个新的组合几何体对象。" +"进入一个新的组合Geometry对象。" #: appGUI/MainGUI.py:403 msgid "Join Excellon(s) -> Excellon" @@ -4838,7 +4838,7 @@ msgstr "转到位置" #: appGUI/MainGUI.py:442 appGUI/MainGUI.py:4686 appGUI/MainGUI.py:4954 #: appGUI/MainGUI.py:5072 appGUI/MainGUI.py:5212 msgid "J" -msgstr "J" +msgstr "" #: appGUI/MainGUI.py:445 appGUI/MainGUI.py:1054 appGUI/MainGUI.py:2305 #: appGUI/MainGUI.py:4722 @@ -5277,12 +5277,12 @@ msgstr "添加钻孔" #: appGUI/MainGUI.py:744 appGUI/MainGUI.py:1176 appGUI/MainGUI.py:1779 #: appGUI/MainGUI.py:2427 appGUI/MainGUI.py:5074 msgid "Add Slot Array" -msgstr "添加插槽阵列" +msgstr "添加槽阵列" #: appGUI/MainGUI.py:747 appGUI/MainGUI.py:1174 appGUI/MainGUI.py:1777 #: appGUI/MainGUI.py:2425 appGUI/MainGUI.py:5077 msgid "Add Slot" -msgstr "添加插槽" +msgstr "添加槽" #: appGUI/MainGUI.py:747 appGUI/MainGUI.py:5077 msgid "W" @@ -5503,7 +5503,7 @@ msgstr "跟随" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:102 #: appPlugins/ToolCutOut.py:2355 msgid "Panel" -msgstr "面板" +msgstr "拼板" #: appGUI/MainGUI.py:1114 appGUI/MainGUI.py:2363 appPlugins/ToolFilm.py:151 #: appPlugins/ToolFilm.py:1132 @@ -5718,7 +5718,7 @@ msgstr "雕刻" #: appGUI/MainGUI.py:1560 msgid "Processing" -msgstr "处理中" +msgstr "加工" #: appGUI/MainGUI.py:1569 msgid "Extra Plugins" @@ -6235,7 +6235,7 @@ msgstr "Alt+X" #: appGUI/MainGUI.py:4753 msgid "Cutout PCB" -msgstr "剪切电路板" +msgstr "切割PCB" #: appGUI/MainGUI.py:4754 msgid "Alt+Z" @@ -6653,20 +6653,20 @@ msgstr "" #: appGUI/ObjectUI.py:347 msgid "Isolation Routing" -msgstr "隔离布线" +msgstr "隔离线路" #: appGUI/ObjectUI.py:350 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:27 #: appPlugins/ToolIsolation.py:3143 msgid "" "Create a Geometry object with\n" "toolpaths to cut around polygons." -msgstr "使用工具路径创建Geometry对象以围绕多边形进行切割。" +msgstr "创建一个带有刀具路径的Geometry对象来切割多边形。" #: appGUI/ObjectUI.py:365 appGUI/ObjectUI.py:1074 appPlugins/ToolNCC.py:4671 msgid "" "Create the Geometry Object\n" "for non-copper routing." -msgstr "为非铜布线创建Geometry对象。" +msgstr "为非铜线路创建Geometry对象。" #: appGUI/ObjectUI.py:380 msgid "" @@ -7535,7 +7535,7 @@ msgstr "新直径" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:62 msgid "Nr of drills" -msgstr "钻头数量" +msgstr "钻孔数量" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:74 msgid "Linear Drill Array" @@ -7565,15 +7565,15 @@ msgstr "圆形角度" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:209 msgid "Linear Slot Array" -msgstr "线槽阵列" +msgstr "线性槽阵列" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:213 msgid "Nr of slots" -msgstr "线槽数量" +msgstr "槽数量" #: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:270 msgid "Circular Slot Array" -msgstr "圆形插槽阵列" +msgstr "圆形槽阵列" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:19 msgid "Excellon Export" @@ -7723,7 +7723,7 @@ msgstr "" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:137 msgid "Slot type" -msgstr "插槽类型" +msgstr "槽类型" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:140 #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:150 @@ -7734,8 +7734,8 @@ msgid "" "If DRILLED(G85) the slots will be exported\n" "using the Drilled slot command (G85)." msgstr "" -"这将设置插槽的导出方式。\n" -"如果已布线，则将使用M15/M16命令布线插槽。\n" +"这将设置槽的导出方式。\n" +"如果已布线，则将使用M15/M16命令布槽。\n" "如果钻孔（G85），将使用钻孔槽命令（G85）导出槽。" #: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:147 @@ -8138,7 +8138,7 @@ msgstr "Small" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:302 #: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:205 msgid "Big" -msgstr "大" +msgstr "" #: appGUI/preferences/general/GeneralAPPSetGroupUI.py:309 msgid "Cursor Size" @@ -8935,7 +8935,7 @@ msgid "" "Create a CNC Job object\n" "tracing the contours of this\n" "Geometry object." -msgstr "创建一个CNC任务对象，跟踪这个几何对象的轮廓。" +msgstr "创建一个CNC任务对象，跟踪这个Geometry象的轮廓。" #: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:45 #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:55 @@ -9525,7 +9525,7 @@ msgid "" msgstr "" "校准点的来源。\n" "它可以是：\n" -"-对象->单击几何图形的孔或Gerber的焊盘\n" +"-对象->单击Excellon的孔或Gerber的焊盘\n" "-自由->在画布上自由单击以获取校准点" #: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:43 @@ -10013,7 +10013,7 @@ msgid "" "percentage of the pad diameter." msgstr "" "打孔源可以是：\n" -"-几何对象->几何对象中心将作为参考。\n" +"-Excellon对象->Excellon 对象钻孔中心将作为参考。\n" "-固定直径->将尝试使用焊盘中心作为添加固定直径孔的参考。\n" "-固定环->将尝试保持固定环。\n" "-比例->将制作一个直径为焊盘直径百分比的Gerber打孔。" @@ -10574,7 +10574,7 @@ msgstr "钻孔直径" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:21 msgid "Cutout Plugin" -msgstr "切割电路板" +msgstr "切割插件" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:28 msgid "" @@ -10613,7 +10613,7 @@ msgid "" msgstr "" "选择要剪切的对象的类型。\n" "-单个：包含单个PCB Gerber轮廓对象。\n" -"-面板：一个面板PCB Gerber对象，由许多单独的PCB轮廓组成。" +"-拼板：一个拼板PCB Gerber对象，由许多单独的PCB轮廓组成。" #: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:101 #: appPlugins/ToolCutOut.py:2354 @@ -11031,7 +11031,7 @@ msgid "" "Create a PCB film from a Gerber or Geometry object.\n" "The file is saved in SVG format." msgstr "" -"从Gerber或几何对象创建PCB胶片。\n" +"从Gerber或Geometry对象创建PCB胶片。\n" "该文件以SVG格式保存。" #: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:38 @@ -11675,7 +11675,7 @@ msgstr "NCC插件" msgid "" "Create a Geometry object with\n" "toolpaths to cut all non-copper regions." -msgstr "使用刀具路径创建几何体对象以剪切所有非铜区域。" +msgstr "使用刀具路径创建Geometry对象以剪切所有非铜区域。" #: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:48 #: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:55 @@ -11760,7 +11760,7 @@ msgid "" "Spacing between columns of the desired panel.\n" "In current units." msgstr "" -"所需面板的列之间的间距。\n" +"所需拼板的列之间的间距。\n" "以当前单位计算。" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:58 @@ -11774,18 +11774,18 @@ msgid "" "Spacing between rows of the desired panel.\n" "In current units." msgstr "" -"所需面板行之间的间距。\n" +"所需拼板行之间的间距。\n" "以当前单位计算。" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:73 #: appPlugins/ToolPanelize.py:1270 msgid "Number of columns of the desired panel" -msgstr "所需面板的列数" +msgstr "所需拼板的列数" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:85 #: appPlugins/ToolPanelize.py:1281 msgid "Number of rows of the desired panel" -msgstr "所需面板的行数" +msgstr "所需拼板的行数" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:92 #: appPlugins/ToolPanelize.py:1293 @@ -11795,7 +11795,7 @@ msgstr "Geometry" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:93 #: appPlugins/ToolPanelize.py:1294 msgid "Panel Type" -msgstr "面板类型" +msgstr "拼板类型" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:95 #: appPlugins/ToolPanelize.py:1296 @@ -11804,7 +11804,7 @@ msgid "" "- Gerber\n" "- Geometry" msgstr "" -"选择面板对象的对象类型：\n" +"选择拼板对象的对象类型：\n" "- Gerber\n" "- Geometry" @@ -11816,8 +11816,8 @@ msgid "" "any two overlapping Line elements in the panel\n" "and will remove the overlapping parts, keeping only one of them." msgstr "" -"仅对“几何图形”面板类型有效。\n" -"选中后，应用程序将在面板中找到任意两个重叠的线条元素，并将删除重叠部分，只保" +"仅对拼板Geometry类型有效。\n" +"选中后，应用程序将在拼板中找到任意两个重叠的线条元素，并将删除重叠部分，只保" "留其中一个。" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:114 @@ -11833,10 +11833,10 @@ msgid "" "the final panel will have as many columns and rows as\n" "they fit completely within selected area." msgstr "" -"区域内由DX和DY定义以约束面板。\n" +"区域内由DX和DY定义以约束拼板。\n" "DX和DY值以当前单位表示。\n" "无论需要多少列和行，\n" -"最后一个面板将有尽可能多的列和行，因为它们完全适合所选区域。" +"最后一个拼板将有尽可能多的列和行，因为它们完全适合所选区域。" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:129 #: appPlugins/ToolPanelize.py:1328 @@ -11849,7 +11849,7 @@ msgid "" "The width (DX) within which the panel must fit.\n" "In current units." msgstr "" -"面板必须适合的宽度（DX）。\n" +"拼板必须适合的宽度（DX）。\n" "以当前单位计算。" #: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:142 @@ -11863,7 +11863,7 @@ msgid "" "The height (DY)within which the panel must fit.\n" "In current units." msgstr "" -"面板必须安装的高度（DY）。\n" +"拼板必须安装的高度（DY）。\n" "以当前单位计算。" #: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:20 @@ -12032,7 +12032,7 @@ msgid "" "A tool to substract one Gerber or Geometry object\n" "from another of the same type." msgstr "" -"从同一类型的另一个Gerber或几何对象中减去一个Gerber或几何对象对象的工具。" +"从同一类型的另一个Gerber或几何对象中减去一个Gerber或Geometry对象的工具。" #: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:29 appPlugins/ToolSub.py:925 msgid "Close paths" @@ -12513,7 +12513,7 @@ msgstr "G代码文本" #: appObjects/FlatCAMObj.py:754 appObjects/FlatCAMObj.py:794 #: appPlugins/ToolReport.py:487 appPlugins/ToolReport.py:527 msgid "GCode Geometry" -msgstr "G代码几何" +msgstr "Geometry G代码" #: appObjects/FlatCAMObj.py:762 appObjects/FlatCAMObj.py:837 #: appPlugins/ToolReport.py:495 appPlugins/ToolReport.py:570 @@ -13323,7 +13323,7 @@ msgstr "盗铜工具。准备用铜填充的区域。" #: appPlugins/ToolCopperThieving.py:670 msgid "Geometry not supported for" -msgstr "不支持的几何图形" +msgstr "不支持的Geometry" #: appPlugins/ToolCopperThieving.py:676 appPlugins/ToolNCC.py:1962 #: appPlugins/ToolNCC.py:2017 appPlugins/ToolNCC.py:3013 @@ -13600,7 +13600,7 @@ msgid "" "There is no object selected for Cutout.\n" "Select one and try again." msgstr "" -"没有为剪切选择任何对象。\n" +"没有为切割选择任何对象。\n" "请选择一个，然后重试。" #: appPlugins/ToolCutOut.py:754 appPlugins/ToolCutOut.py:1139 @@ -13629,7 +13629,7 @@ msgstr "打孔连接失败。" #: appPlugins/ToolCutOut.py:1113 tclCommands/TclCommandGeoCutout.py:301 #: tclCommands/TclCommandGeoCutout.py:356 msgid "Any-form Cutout operation finished." -msgstr "任何形式的剪切操作都已完成。" +msgstr "任何形式的切割操作都已完成。" #: appPlugins/ToolCutOut.py:1134 appPlugins/ToolDrilling.py:1898 #: appPlugins/ToolEtchCompensation.py:200 appPlugins/ToolFollow.py:217 @@ -13659,12 +13659,12 @@ msgstr "无法添加钻孔。" #: appPlugins/ToolCutOut.py:1608 appPlugins/ToolCutOut.py:1663 msgid "Geometry object for manual cutout not found" -msgstr "找不到手动剪切的几何体对象" +msgstr "找不到手动剪切的Geometry对象" #: appPlugins/ToolCutOut.py:1611 msgid "" "Click on the selected geometry object perimeter to create a bridge gap ..." -msgstr "单击选定的几何体对象周长以创建桥梁间隙。。。" +msgstr "单击选定的Geometry对象周长以创建桥梁间隙。。。" #: appPlugins/ToolCutOut.py:1702 msgid "No tool in the Geometry object." @@ -13680,7 +13680,7 @@ msgid "" "There is no Gerber object selected for Cutout.\n" "Select one and try again." msgstr "" -"没有为剪切选择Gerber对象。\n" +"没有为切割选择Gerber对象。\n" "请选择一个，然后重试。" #: appPlugins/ToolCutOut.py:1746 @@ -13731,7 +13731,7 @@ msgstr "" #: appPlugins/ToolCutOut.py:2405 msgid "Cutout Tool" -msgstr "剪切工具" +msgstr "切割工具" #: appPlugins/ToolCutOut.py:2424 appPlugins/ToolIsolation.py:214 #: appPlugins/ToolIsolation.py:3291 appPlugins/ToolMilling.py:3738 @@ -13796,7 +13796,7 @@ msgid "" "The cutout shape can be of any shape.\n" "Useful when the PCB has a non-rectangular shape." msgstr "" -"剪切选定对象。\n" +"切割选定对象。\n" "切口形状可以是任何形状。\n" "当PCB具有非矩形形状时非常有用。" @@ -13807,7 +13807,7 @@ msgid "" "always a rectangle shape and it will be\n" "the bounding box of the Object." msgstr "" -"剪切选定对象。\n" +"切割选定对象。\n" "生成的剪切形状如下所示\n" "始终为矩形，它将是对象的边界框。" @@ -13823,7 +13823,7 @@ msgid "" "Select the source Gerber file in the top object combobox." msgstr "" "如果要剪切的对象是Gerber\n" -"首先创建一个围绕它的几何体，\n" +"首先创建一个围绕它的Geometry，\n" "如果还不存在，用作断流器。\n" "在顶部对象组合框中选择源Gerber文件。" @@ -13848,7 +13848,7 @@ msgid "" "the Geometry object used as a cutout geometry." msgstr "" "使用鼠标左键（LMB）单击创建桥接间隙，以将PCB与周围材料分开。\n" -"必须在用作剪切几何体的几何体对象的周长上执行LMB单击。" +"必须在用作剪切几何体的Geometry对象的周长上执行LMB单击。" #: appPlugins/ToolCutOut.py:2754 appPlugins/ToolCutOut.py:2817 msgid "Cut by Drilling" @@ -14522,7 +14522,7 @@ msgid "" "for custom selection of tools." msgstr "" "生成CNC任务。\n" -"如果进行铣削，则将创建一个附加的几何体对象。\n" +"如果进行铣削，则将创建一个附加的Geometry对象。\n" "在刀具表中添加/选择至少一个刀具。\n" "单击#标题选择全部，或Ctrl+LMB或自定义工具选择。" @@ -14940,7 +14940,7 @@ msgstr "" msgid "" "Using the Pad center does not work on Geometry objects. Only a Gerber object " "has pads." -msgstr "使用焊盘中心不适用于几何体对象。只有Gerber对象具有焊盘。" +msgstr "使用焊盘中心不适用于Geometry对象。只有Gerber对象具有焊盘。" #: appPlugins/ToolFollow.py:342 appPlugins/ToolFollow.py:413 msgid "Failed to create Follow Geometry." @@ -15187,7 +15187,7 @@ msgstr "插入几何体" #: appPlugins/ToolIsolation.py:1798 appPlugins/ToolIsolation.py:1990 #: appPlugins/ToolIsolation.py:2174 msgid "Empty Geometry in" -msgstr "清空几何图形自" +msgstr "清空Geometry自" #: appPlugins/ToolIsolation.py:1999 msgid "" @@ -15237,7 +15237,7 @@ msgstr "新刀具添加到刀具表中。" #: appPlugins/ToolIsolation.py:3163 msgid "Gerber object for isolation routing." -msgstr "隔离布线的Gerber对象。" +msgstr "用于隔离线路的 Gerber 对象。" #: appPlugins/ToolIsolation.py:3187 appPlugins/ToolNCC.py:4188 msgid "" @@ -15316,9 +15316,9 @@ msgid "" "inside the actual Gerber feature, use a negative tool\n" "diameter above." msgstr "" -"使用刀路创建几何体对象，以在对象的外部、内部或两侧切割隔离。对于Gerber对象，" -"外部指Gerber特征外部，内部指Gerber特征内部，如果可能的话。这意味着，只有在" -"Gerber特征内部有开口时，它们才会被隔离。如果想要在实际Gerber特征内部切割隔" +"使用刀路创建Geometry对象，以在对象的外部、内部或两侧切割隔离。对于Gerber对" +"象，外部指Gerber特征外部，内部指Gerber特征内部，如果可能的话。这意味着，只有" +"在Gerber特征内部有开口时，它们才会被隔离。如果想要在实际Gerber特征内部切割隔" "离，请使用上面的负刀具直径。" #: appPlugins/ToolLevelling.py:564 appPlugins/ToolLevelling.py:894 @@ -15698,11 +15698,11 @@ msgstr "正在生成打孔几何体。。。" #: appPlugins/ToolMilling.py:2604 msgid "Generating slot milling geometry..." -msgstr "正在生成插槽几何体。。。" +msgstr "正在生成槽几何体。。。" #: appPlugins/ToolMilling.py:2696 msgid "This Geometry can't be processed because it is" -msgstr "无法处理此几何体，因为它是" +msgstr "无法处理此Geometry，因为它是" #: appPlugins/ToolMilling.py:2730 msgid "Failed. No tool selected in the tool table ..." @@ -15710,7 +15710,7 @@ msgstr "失败。刀具表中未选择任何刀具。。。" #: appPlugins/ToolMilling.py:3031 appPlugins/ToolPaint.py:1851 msgid "Geometry could not be painted completely" -msgstr "无法完全绘制几何体" +msgstr "无法完全绘制Geometry" #: appPlugins/ToolMilling.py:3580 msgid "Object for milling operation." @@ -15794,7 +15794,7 @@ msgstr "" msgid "" "The preprocessor JSON file that dictates\n" "Gcode output for Geometry (Milling) Objects." -msgstr "为几何体（铣削）对象指定G代码输出的预处理器JSON文件。" +msgstr "为Geometry（铣削）对象指定G代码输出的预处理器JSON文件。" #: appPlugins/ToolMove.py:102 msgid "MOVE: Click on the Start point ..." @@ -15921,7 +15921,7 @@ msgid "" "geometry.\n" "Change the painting parameters and try again." msgstr "" -"文件中没有NCC几何图形。\n" +"文件中没有NCC Geometry。\n" "通常这意味着工具直径对于绘制的几何体来说太大。\n" "更改绘制参数，然后重试。" @@ -16187,7 +16187,7 @@ msgid "" "geometry.\n" "Change the painting parameters and try again." msgstr "" -"文件中没有绘制几何图形。\n" +"文件中没有绘制Geometry。\n" "通常这意味着工具直径对于绘制的几何体来说太大。\n" "更改绘制参数，然后重试。" @@ -16275,7 +16275,7 @@ msgstr "" #: appPlugins/ToolPaint.py:3336 msgid "Create a Geometry Object which paints the polygons." -msgstr "创建绘制多边形的几何体对象。" +msgstr "创建绘制多边形的Geometry对象。" #: appPlugins/ToolPanelize.py:112 appPlugins/ToolPanelize.py:1099 msgid "Panelization" @@ -16287,12 +16287,12 @@ msgstr "列或行为零值。将它们更改为正整数。" #: appPlugins/ToolPanelize.py:416 msgid "Generating panel ... " -msgstr "正在生成面板。。。 " +msgstr "正在生成拼板。。。 " #: appPlugins/ToolPanelize.py:509 appPlugins/ToolPanelize.py:801 #: appPlugins/ToolPanelize.py:1051 msgid "Generating panel ... Adding the source code." -msgstr "正在生成面板。。。添加源代码。" +msgstr "正在生成拼板。。。添加源代码。" #: appPlugins/ToolPanelize.py:729 msgid "Optimizing the overlapping paths." @@ -16304,18 +16304,18 @@ msgstr "优化完成。" #: appPlugins/ToolPanelize.py:1060 msgid "Generating panel... Spawning copies" -msgstr "正在生成面板。。。生成副本" +msgstr "正在生成拼板。。。生成副本" #: appPlugins/ToolPanelize.py:1076 #, python-brace-format msgid "" "{text} Too big for the constrain area. Final panel has {col} columns and " "{row} rows" -msgstr "{text}对于约束区域来说太大。最后一个面板有{col}列和{row}行" +msgstr "{text}对于约束区域来说太大。最后一个拼板有{col}列和{row}行" #: appPlugins/ToolPanelize.py:1084 msgid "Panel created successfully." -msgstr "面板创建成功。" +msgstr "拼板创建成功。" #: appPlugins/ToolPanelize.py:1139 msgid "" @@ -16372,7 +16372,7 @@ msgstr "用作要拼板的选定对象的容器的实际对象。" #: appPlugins/ToolPanelize.py:1227 msgid "Panel Data" -msgstr "面板数据" +msgstr "拼板数据" #: appPlugins/ToolPanelize.py:1229 msgid "" @@ -16383,13 +16383,13 @@ msgid "" "The spacings will set the distance between any two\n" "elements of the panel array." msgstr "" -"这些信息将形成最终的面板。\n" +"这些信息将形成最终的拼板。\n" "行数和列数将设置将生成多少个原始几何图形的副本。\n" -"间距将设置面板阵列任意两个元素之间的距离。" +"间距将设置拼板阵列任意两个元素之间的距离。" #: appPlugins/ToolPanelize.py:1314 msgid "Constrain panel within" -msgstr "将面板约束在" +msgstr "将拼板约束在" #: appPlugins/ToolPanelize.py:1357 msgid "Panelize Object" @@ -16861,7 +16861,7 @@ msgstr "检查规则的底部Gerber丝印对象。" #: appPlugins/ToolRulesCheck.py:1330 msgid "The Gerber Outline (Cutout) object for which rules are checked." -msgstr "为其检查规则的Gerber轮廓（剪切）对象。" +msgstr "为其检查规则的Gerber轮廓（切割）对象。" #: appPlugins/ToolRulesCheck.py:1343 msgid "Excellon objects for which to check rules." @@ -16961,11 +16961,11 @@ msgstr "正在生成锡膏分配几何体。。。" #: appPlugins/ToolSolderPaste.py:909 msgid "There is no Geometry object available." -msgstr "没有可用的几何体对象。" +msgstr "没有可用的Geometry对象。" #: appPlugins/ToolSolderPaste.py:914 msgid "This Geometry can't be processed. NOT a solder_paste_tool geometry." -msgstr "无法处理此几何体。不是锡膏工具几何图形。" +msgstr "无法处理此Geometry。不是锡膏工具几何图形。" #: appPlugins/ToolSolderPaste.py:1019 msgid "ToolSolderPaste CNCjob created" @@ -17034,7 +17034,7 @@ msgid "" "The name of the object has to end in:\n" "'_solderpaste' as a protection." msgstr "" -"几何焊膏对象。\n" +"Geometry焊膏对象。\n" "对象的名称必须以以下结尾：\n" "“_solderpaste”作为保护。" @@ -17155,13 +17155,13 @@ msgstr "" msgid "" "Geometry object from which to subtract\n" "the subtractor Geometry object." -msgstr "要从中减去差集几何体对象的几何体对象。" +msgstr "要从中减去差集Geometry对象的Geometry对象。" #: appPlugins/ToolSub.py:918 msgid "" "Geometry object that will be subtracted\n" "from the target Geometry object." -msgstr "将从目标几何体对象中减去的几何体对象。" +msgstr "将从目标Geometry对象中减去的Geometry对象。" #: appPlugins/ToolSub.py:930 msgid "Subtract Geometry" @@ -17323,7 +17323,7 @@ msgid "" "possible.\n" "Edit only one geometry at a time." msgstr "" -"无法在多重几何图形中同时编辑工具几何图形。\n" +"无法在多重Geometry中同时编辑工具几何图形。\n" "一次只能编辑一个几何图形。" #: app_Main.py:2624 @@ -17605,7 +17605,7 @@ msgid "" "be lost and the result may not be what was expected. \n" "Check the generated GCODE." msgstr "" -"加入失败。几何体对象的类型不同。\n" +"加入失败。Geometry对象的类型不同。\n" "至少有一个是多几何类型，另一个是单几何类型。一种可能是从一个转换到另一个，然" "后重试加入，但在从多几何转换到单几何的情况下，信息可能会丢失，结果可能不是预" "期的结果。\n" @@ -17637,7 +17637,7 @@ msgstr "失败。选择一个Geometry对象，然后重试。" #: app_Main.py:4522 app_Main.py:4558 msgid "Expected a GeometryObject, got" -msgstr "应该是几何体对象，得到" +msgstr "应该是Geometry对象，得到" #: app_Main.py:4537 msgid "A Geometry object was converted to MultiGeo type." @@ -18342,7 +18342,7 @@ msgstr "来自GERBERS的G代码" #: camlib.py:707 msgid "self.solid_geometry is neither BaseGeometry or list." -msgstr "self.solid_geometry既不是基本几何体，也不是列表。" +msgstr "self.solid_geometry既不是基本的Geometry，也不是列表。" #: camlib.py:1101 msgid "Pass" @@ -18489,7 +18489,7 @@ msgstr "" #: camlib.py:5633 msgid "" "Trying to generate a CNC Job from a Geometry object without solid_geometry." -msgstr "尝试从没有实体几何体的几何体对象生成CNC任务。" +msgstr "尝试从没有实体几何体的Geometry对象生成CNC任务。" #: camlib.py:5675 msgid "" @@ -18625,7 +18625,7 @@ msgstr "通过使用偏移所有加载的对象来设置原点 " #: tclCommands/TclCommandSubtractRectangle.py:62 msgid "No Geometry name in args. Provide a name and try again." -msgstr "参数中没有几何图形名称。请提供名称，然后重试。" +msgstr "参数中没有Geometry名称。请提供名称，然后重试。" #~ msgid "Tool Name" #~ msgstr "刀具名"