- added new parameter for Excellon Object in Preferences: Fast Retract. If the checkbox is checked then after reaching the drill depth, the drill bit will be raised out of the hole asap.
- started to work on GUI forms simplification - changed the Preferences GUI for Geometry and Excellon Objects to make a difference between parameters that are changed often and those that are not.
This commit is contained in:
Marius Stanciu
479
FlatCAMGUI.py
479
FlatCAMGUI.py
@@ -2357,9 +2357,9 @@ class ExcellonPreferencesUI(QtWidgets.QWidget):
|
||||
self.setLayout(self.layout)
|
||||
|
||||
self.excellon_gen_group = ExcellonGenPrefGroupUI()
|
||||
self.excellon_gen_group.setFixedWidth(275)
|
||||
self.excellon_gen_group.setFixedWidth(220)
|
||||
self.excellon_opt_group = ExcellonOptPrefGroupUI()
|
||||
self.excellon_opt_group.setFixedWidth(275)
|
||||
self.excellon_opt_group.setFixedWidth(250)
|
||||
|
||||
self.layout.addWidget(self.excellon_gen_group)
|
||||
self.layout.addWidget(self.excellon_opt_group)
|
||||
@@ -2374,9 +2374,9 @@ class GeometryPreferencesUI(QtWidgets.QWidget):
|
||||
self.setLayout(self.layout)
|
||||
|
||||
self.geometry_gen_group = GeometryGenPrefGroupUI()
|
||||
self.geometry_gen_group.setFixedWidth(275)
|
||||
self.geometry_gen_group.setFixedWidth(220)
|
||||
self.geometry_opt_group = GeometryOptPrefGroupUI()
|
||||
self.geometry_opt_group.setFixedWidth(275)
|
||||
self.geometry_opt_group.setFixedWidth(250)
|
||||
|
||||
self.layout.addWidget(self.geometry_gen_group)
|
||||
self.layout.addWidget(self.geometry_opt_group)
|
||||
@@ -3203,7 +3203,7 @@ class ExcellonGenPrefGroupUI(OptionsGroupUI):
|
||||
form_box_excellon = QtWidgets.QFormLayout()
|
||||
hlay6.addLayout(form_box_excellon)
|
||||
|
||||
self.excellon_optimization_label = QtWidgets.QLabel('Path Optimization: ')
|
||||
self.excellon_optimization_label = QtWidgets.QLabel('Algorithm: ')
|
||||
self.excellon_optimization_label.setAlignment(QtCore.Qt.AlignLeft)
|
||||
self.excellon_optimization_label.setToolTip(
|
||||
"This sets the optimization type for the Excellon drill path.\n"
|
||||
@@ -3258,6 +3258,106 @@ class ExcellonGenPrefGroupUI(OptionsGroupUI):
|
||||
self.optimization_time_label.setDisabled(True)
|
||||
self.optimization_time_entry.setDisabled(True)
|
||||
|
||||
## Create CNC Job
|
||||
self.cncjob_label = QtWidgets.QLabel('<b>Create CNC Job</b>')
|
||||
self.cncjob_label.setToolTip(
|
||||
"Parameters used to create a CNC Job object\n"
|
||||
"for this drill object that are not changed very often."
|
||||
)
|
||||
self.layout.addWidget(self.cncjob_label)
|
||||
|
||||
grid1 = QtWidgets.QGridLayout()
|
||||
self.layout.addLayout(grid1)
|
||||
|
||||
offsetlabel = QtWidgets.QLabel('Offset Z:')
|
||||
offsetlabel.setToolTip(
|
||||
"Some drill bits (the larger ones) need to drill deeper\n"
|
||||
"to create the desired exit hole diameter due of the tip shape.\n"
|
||||
"The value here can compensate the Cut Z parameter.")
|
||||
grid1.addWidget(offsetlabel, 0, 0)
|
||||
self.offset_entry = LengthEntry()
|
||||
grid1.addWidget(self.offset_entry, 0, 1)
|
||||
|
||||
toolchange_xy_label = QtWidgets.QLabel('Toolchange X,Y:')
|
||||
toolchange_xy_label.setToolTip(
|
||||
"Toolchange X,Y position."
|
||||
)
|
||||
grid1.addWidget(toolchange_xy_label, 1, 0)
|
||||
self.toolchangexy_entry = FCEntry()
|
||||
grid1.addWidget(self.toolchangexy_entry, 1, 1)
|
||||
|
||||
startzlabel = QtWidgets.QLabel('Start move Z:')
|
||||
startzlabel.setToolTip(
|
||||
"Height of the tool just after start.\n"
|
||||
"Delete the value if you don't need this feature."
|
||||
)
|
||||
grid1.addWidget(startzlabel, 2, 0)
|
||||
self.estartz_entry = FloatEntry()
|
||||
grid1.addWidget(self.estartz_entry, 2, 1)
|
||||
|
||||
endzlabel = QtWidgets.QLabel('End move Z:')
|
||||
endzlabel.setToolTip(
|
||||
"Height of the tool after\n"
|
||||
"the last move at the end of the job."
|
||||
)
|
||||
grid1.addWidget(endzlabel, 3, 0)
|
||||
self.eendz_entry = LengthEntry()
|
||||
grid1.addWidget(self.eendz_entry, 3, 1)
|
||||
|
||||
|
||||
fr_rapid_label = QtWidgets.QLabel('Feedrate Rapids:')
|
||||
fr_rapid_label.setToolTip(
|
||||
"Tool speed while drilling\n"
|
||||
"with rapid move\n"
|
||||
"(in units per minute)."
|
||||
)
|
||||
grid1.addWidget(fr_rapid_label, 4, 0)
|
||||
self.feedrate_rapid_entry = LengthEntry()
|
||||
grid1.addWidget(self.feedrate_rapid_entry, 4, 1)
|
||||
|
||||
# Probe depth
|
||||
self.pdepth_label = QtWidgets.QLabel("Probe Z depth:")
|
||||
self.pdepth_label.setToolTip(
|
||||
"The maximum depth that the probe is allowed\n"
|
||||
"to probe. Negative value, in current units."
|
||||
)
|
||||
grid1.addWidget(self.pdepth_label, 5, 0)
|
||||
self.pdepth_entry = FCEntry()
|
||||
grid1.addWidget(self.pdepth_entry, 5, 1)
|
||||
|
||||
# Probe feedrate
|
||||
self.feedrate_probe_label = QtWidgets.QLabel("Feedrate Probe:")
|
||||
self.feedrate_probe_label.setToolTip(
|
||||
"The feedrate used while the probe is probing."
|
||||
)
|
||||
grid1.addWidget(self.feedrate_probe_label, 6, 0)
|
||||
self.feedrate_probe_entry = FCEntry()
|
||||
grid1.addWidget(self.feedrate_probe_entry, 6, 1)
|
||||
|
||||
fplungelabel = QtWidgets.QLabel('Fast Plunge:')
|
||||
fplungelabel.setToolTip(
|
||||
"By checking this, the vertical move from\n"
|
||||
"Z_Toolchange to Z_move is done with G0,\n"
|
||||
"meaning the fastest speed available.\n"
|
||||
"WARNING: the move is done at Toolchange X,Y coords."
|
||||
)
|
||||
self.fplunge_cb = FCCheckBox()
|
||||
grid1.addWidget(fplungelabel, 7, 0)
|
||||
grid1.addWidget(self.fplunge_cb, 7, 1)
|
||||
|
||||
fretractlabel = QtWidgets.QLabel('Fast Retract:')
|
||||
fretractlabel.setToolTip(
|
||||
"Exit hole strategy.\n"
|
||||
" - When uncheked, while exiting the drilled hole the drill bit\n"
|
||||
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
|
||||
"travel as fast as possible (G0) to the Z Move (travel height).\n"
|
||||
" - When checked the travel from Z cut (cut depth) to Z_move\n"
|
||||
"(travel height) is done as fast as possible (G0) in one move."
|
||||
)
|
||||
self.fretract_cb = FCCheckBox()
|
||||
grid1.addWidget(fretractlabel, 8, 0)
|
||||
grid1.addWidget(self.fretract_cb, 8, 1)
|
||||
|
||||
self.layout.addStretch()
|
||||
|
||||
def optimization_selection(self):
|
||||
@@ -3268,6 +3368,7 @@ class ExcellonGenPrefGroupUI(OptionsGroupUI):
|
||||
self.optimization_time_label.setDisabled(True)
|
||||
self.optimization_time_entry.setDisabled(True)
|
||||
|
||||
|
||||
class ExcellonOptPrefGroupUI(OptionsGroupUI):
|
||||
|
||||
def __init__(self, parent=None):
|
||||
@@ -3279,7 +3380,7 @@ class ExcellonOptPrefGroupUI(OptionsGroupUI):
|
||||
## Create CNC Job
|
||||
self.cncjob_label = QtWidgets.QLabel('<b>Create CNC Job</b>')
|
||||
self.cncjob_label.setToolTip(
|
||||
"Create a CNC Job object\n"
|
||||
"Parameters used to create a CNC Job object\n"
|
||||
"for this drill object."
|
||||
)
|
||||
self.layout.addWidget(self.cncjob_label)
|
||||
@@ -3296,23 +3397,14 @@ class ExcellonOptPrefGroupUI(OptionsGroupUI):
|
||||
self.cutz_entry = LengthEntry()
|
||||
grid2.addWidget(self.cutz_entry, 0, 1)
|
||||
|
||||
offsetlabel = QtWidgets.QLabel('Offset:')
|
||||
offsetlabel.setToolTip(
|
||||
"Some drill bits (the larger ones) need to drill deeper\n"
|
||||
"to create the desired exit hole diameter due of the tip shape.\n"
|
||||
"The value here can compensate the Cut Z parameter.")
|
||||
grid2.addWidget(offsetlabel, 1, 0)
|
||||
self.offset_entry = LengthEntry()
|
||||
grid2.addWidget(self.offset_entry, 1, 1)
|
||||
|
||||
travelzlabel = QtWidgets.QLabel('Travel Z:')
|
||||
travelzlabel.setToolTip(
|
||||
"Tool height when travelling\n"
|
||||
"across the XY plane."
|
||||
)
|
||||
grid2.addWidget(travelzlabel, 2, 0)
|
||||
grid2.addWidget(travelzlabel, 1, 0)
|
||||
self.travelz_entry = LengthEntry()
|
||||
grid2.addWidget(self.travelz_entry, 2, 1)
|
||||
grid2.addWidget(self.travelz_entry, 1, 1)
|
||||
|
||||
# Tool change:
|
||||
toolchlabel = QtWidgets.QLabel("Tool change:")
|
||||
@@ -3321,71 +3413,35 @@ class ExcellonOptPrefGroupUI(OptionsGroupUI):
|
||||
"in G-Code (Pause for tool change)."
|
||||
)
|
||||
self.toolchange_cb = FCCheckBox()
|
||||
grid2.addWidget(toolchlabel, 3, 0)
|
||||
grid2.addWidget(self.toolchange_cb, 3, 1)
|
||||
grid2.addWidget(toolchlabel, 2, 0)
|
||||
grid2.addWidget(self.toolchange_cb, 2, 1)
|
||||
|
||||
toolchangezlabel = QtWidgets.QLabel('Toolchange Z:')
|
||||
toolchangezlabel.setToolTip(
|
||||
"Toolchange Z position."
|
||||
)
|
||||
grid2.addWidget(toolchangezlabel, 4, 0)
|
||||
grid2.addWidget(toolchangezlabel, 3, 0)
|
||||
self.toolchangez_entry = LengthEntry()
|
||||
grid2.addWidget(self.toolchangez_entry, 4, 1)
|
||||
|
||||
toolchange_xy_label = QtWidgets.QLabel('Toolchange X,Y:')
|
||||
toolchange_xy_label.setToolTip(
|
||||
"Toolchange X,Y position."
|
||||
)
|
||||
grid2.addWidget(toolchange_xy_label, 5, 0)
|
||||
self.toolchangexy_entry = FCEntry()
|
||||
grid2.addWidget(self.toolchangexy_entry, 5, 1)
|
||||
|
||||
startzlabel = QtWidgets.QLabel('Start move Z:')
|
||||
startzlabel.setToolTip(
|
||||
"Height of the tool just after start.\n"
|
||||
"Delete the value if you don't need this feature."
|
||||
)
|
||||
grid2.addWidget(startzlabel, 6, 0)
|
||||
self.estartz_entry = FloatEntry()
|
||||
grid2.addWidget(self.estartz_entry, 6, 1)
|
||||
|
||||
endzlabel = QtWidgets.QLabel('End move Z:')
|
||||
endzlabel.setToolTip(
|
||||
"Height of the tool after\n"
|
||||
"the last move at the end of the job."
|
||||
)
|
||||
grid2.addWidget(endzlabel, 7, 0)
|
||||
self.eendz_entry = LengthEntry()
|
||||
grid2.addWidget(self.eendz_entry, 7, 1)
|
||||
grid2.addWidget(self.toolchangez_entry, 3, 1)
|
||||
|
||||
frlabel = QtWidgets.QLabel('Feedrate:')
|
||||
frlabel.setToolTip(
|
||||
"Tool speed while drilling\n"
|
||||
"(in units per minute)."
|
||||
)
|
||||
grid2.addWidget(frlabel, 8, 0)
|
||||
grid2.addWidget(frlabel, 4, 0)
|
||||
self.feedrate_entry = LengthEntry()
|
||||
grid2.addWidget(self.feedrate_entry, 8, 1)
|
||||
|
||||
fr_rapid_label = QtWidgets.QLabel('Feedrate Rapids:')
|
||||
fr_rapid_label.setToolTip(
|
||||
"Tool speed while drilling\n"
|
||||
"with rapid move\n"
|
||||
"(in units per minute)."
|
||||
)
|
||||
grid2.addWidget(fr_rapid_label, 9, 0)
|
||||
self.feedrate_rapid_entry = LengthEntry()
|
||||
grid2.addWidget(self.feedrate_rapid_entry, 9, 1)
|
||||
grid2.addWidget(self.feedrate_entry, 4, 1)
|
||||
|
||||
# Spindle speed
|
||||
spdlabel = QtWidgets.QLabel('Spindle speed:')
|
||||
spdlabel = QtWidgets.QLabel('Spindle Speed:')
|
||||
spdlabel.setToolTip(
|
||||
"Speed of the spindle\n"
|
||||
"in RPM (optional)"
|
||||
)
|
||||
grid2.addWidget(spdlabel, 10, 0)
|
||||
grid2.addWidget(spdlabel, 5, 0)
|
||||
self.spindlespeed_entry = IntEntry(allow_empty=True)
|
||||
grid2.addWidget(self.spindlespeed_entry, 10, 1)
|
||||
grid2.addWidget(self.spindlespeed_entry, 5, 1)
|
||||
|
||||
# Dwell
|
||||
dwelllabel = QtWidgets.QLabel('Dwell:')
|
||||
@@ -3393,16 +3449,16 @@ class ExcellonOptPrefGroupUI(OptionsGroupUI):
|
||||
"Pause to allow the spindle to reach its\n"
|
||||
"speed before cutting."
|
||||
)
|
||||
dwelltime = QtWidgets.QLabel('Duration [m-sec.]:')
|
||||
dwelltime = QtWidgets.QLabel('Duration:')
|
||||
dwelltime.setToolTip(
|
||||
"Number of milliseconds for spindle to dwell."
|
||||
)
|
||||
self.dwell_cb = FCCheckBox()
|
||||
self.dwelltime_entry = FCEntry()
|
||||
grid2.addWidget(dwelllabel, 11, 0)
|
||||
grid2.addWidget(self.dwell_cb, 11, 1)
|
||||
grid2.addWidget(dwelltime, 12, 0)
|
||||
grid2.addWidget(self.dwelltime_entry, 12, 1)
|
||||
grid2.addWidget(dwelllabel, 6, 0)
|
||||
grid2.addWidget(self.dwell_cb, 6, 1)
|
||||
grid2.addWidget(dwelltime, 7, 0)
|
||||
grid2.addWidget(self.dwelltime_entry, 7, 1)
|
||||
|
||||
self.ois_dwell_exc = OptionalInputSection(self.dwell_cb, [self.dwelltime_entry])
|
||||
|
||||
@@ -3412,40 +3468,11 @@ class ExcellonOptPrefGroupUI(OptionsGroupUI):
|
||||
"The postprocessor file that dictates\n"
|
||||
"gcode output."
|
||||
)
|
||||
grid2.addWidget(pp_excellon_label, 13, 0)
|
||||
grid2.addWidget(pp_excellon_label, 8, 0)
|
||||
self.pp_excellon_name_cb = FCComboBox()
|
||||
self.pp_excellon_name_cb.setFocusPolicy(Qt.StrongFocus)
|
||||
grid2.addWidget(self.pp_excellon_name_cb, 13, 1)
|
||||
grid2.addWidget(self.pp_excellon_name_cb, 8, 1)
|
||||
|
||||
# Probe depth
|
||||
self.pdepth_label = QtWidgets.QLabel("Probe Z depth:")
|
||||
self.pdepth_label.setToolTip(
|
||||
"The maximum depth that the probe is allowed\n"
|
||||
"to probe. Negative value, in current units."
|
||||
)
|
||||
grid2.addWidget(self.pdepth_label, 14, 0)
|
||||
self.pdepth_entry = FCEntry()
|
||||
grid2.addWidget(self.pdepth_entry, 14, 1)
|
||||
|
||||
# Probe feedrate
|
||||
self.feedrate_probe_label = QtWidgets.QLabel("Feedrate Probe:")
|
||||
self.feedrate_probe_label.setToolTip(
|
||||
"The feedrate used while the probe is probing."
|
||||
)
|
||||
grid2.addWidget(self.feedrate_probe_label, 15, 0)
|
||||
self.feedrate_probe_entry = FCEntry()
|
||||
grid2.addWidget(self.feedrate_probe_entry, 15, 1)
|
||||
|
||||
fplungelabel = QtWidgets.QLabel('Fast Plunge:')
|
||||
fplungelabel.setToolTip(
|
||||
"By checking this, the vertical move from\n"
|
||||
"Z_Toolchange to Z_move is done with G0,\n"
|
||||
"meaning the fastest speed available.\n"
|
||||
"WARNING: the move is done at Toolchange X,Y coords."
|
||||
)
|
||||
self.fplunge_cb = FCCheckBox()
|
||||
grid2.addWidget(fplungelabel, 16, 0)
|
||||
grid2.addWidget(self.fplunge_cb, 16, 1)
|
||||
|
||||
#### Choose what to use for Gcode creation: Drills, Slots or Both
|
||||
excellon_gcode_type_label = QtWidgets.QLabel('<b>Gcode: </b>')
|
||||
@@ -3458,8 +3485,8 @@ class ExcellonOptPrefGroupUI(OptionsGroupUI):
|
||||
self.excellon_gcode_type_radio = RadioSet([{'label': 'Drills', 'value': 'drills'},
|
||||
{'label': 'Slots', 'value': 'slots'},
|
||||
{'label': 'Both', 'value': 'both'}])
|
||||
grid2.addWidget(excellon_gcode_type_label, 17, 0)
|
||||
grid2.addWidget(self.excellon_gcode_type_radio, 17, 1)
|
||||
grid2.addWidget(excellon_gcode_type_label, 9, 0)
|
||||
grid2.addWidget(self.excellon_gcode_type_radio, 9, 1)
|
||||
|
||||
# until I decide to implement this feature those remain disabled
|
||||
excellon_gcode_type_label.hide()
|
||||
@@ -3536,18 +3563,134 @@ class GeometryGenPrefGroupUI(OptionsGroupUI):
|
||||
self.tools_label = QtWidgets.QLabel("<b>Tools</b>")
|
||||
self.layout.addWidget(self.tools_label)
|
||||
|
||||
grid1 = QtWidgets.QGridLayout()
|
||||
self.layout.addLayout(grid1)
|
||||
grid0_b = QtWidgets.QGridLayout()
|
||||
self.layout.addLayout(grid0_b)
|
||||
|
||||
# Tooldia
|
||||
tdlabel = QtWidgets.QLabel('Tool dia: ')
|
||||
tdlabel.setToolTip(
|
||||
"The diameter of the cutting\n"
|
||||
"tool (just for display)."
|
||||
"tool.."
|
||||
)
|
||||
grid1.addWidget(tdlabel, 0, 0)
|
||||
grid0_b.addWidget(tdlabel, 0, 0)
|
||||
self.cnctooldia_entry = LengthEntry()
|
||||
grid1.addWidget(self.cnctooldia_entry, 0, 1)
|
||||
grid0_b.addWidget(self.cnctooldia_entry, 0, 1)
|
||||
|
||||
|
||||
# ------------------------------
|
||||
## Create CNC Job
|
||||
# ------------------------------
|
||||
self.cncjob_label = QtWidgets.QLabel('<b>Create CNC Job:</b>')
|
||||
self.cncjob_label.setToolTip(
|
||||
"Parameters to create a CNC Job object\n"
|
||||
"tracing the contours of a Geometry object."
|
||||
)
|
||||
self.layout.addWidget(self.cncjob_label)
|
||||
|
||||
grid1 = QtWidgets.QGridLayout()
|
||||
self.layout.addLayout(grid1)
|
||||
|
||||
# Toolchange X,Y
|
||||
toolchange_xy_label = QtWidgets.QLabel('Toolchange X,Y:')
|
||||
toolchange_xy_label.setToolTip(
|
||||
"Toolchange X,Y position."
|
||||
)
|
||||
grid1.addWidget(toolchange_xy_label, 1, 0)
|
||||
self.toolchangexy_entry = FCEntry()
|
||||
grid1.addWidget(self.toolchangexy_entry, 1, 1)
|
||||
|
||||
# Start move Z
|
||||
startzlabel = QtWidgets.QLabel('Start move Z:')
|
||||
startzlabel.setToolTip(
|
||||
"Height of the tool just after starting the work.\n"
|
||||
"Delete the value if you don't need this feature."
|
||||
)
|
||||
grid1.addWidget(startzlabel, 2, 0)
|
||||
self.gstartz_entry = FloatEntry()
|
||||
grid1.addWidget(self.gstartz_entry, 2, 1)
|
||||
|
||||
# End move Z
|
||||
endzlabel = QtWidgets.QLabel('End move Z:')
|
||||
endzlabel.setToolTip(
|
||||
"Height of the tool after\n"
|
||||
"the last move at the end of the job."
|
||||
)
|
||||
grid1.addWidget(endzlabel, 3, 0)
|
||||
self.gendz_entry = LengthEntry()
|
||||
grid1.addWidget(self.gendz_entry, 3, 1)
|
||||
|
||||
# Feedrate rapids
|
||||
fr_rapid_label = QtWidgets.QLabel('Feedrate Rapids:')
|
||||
fr_rapid_label.setToolTip(
|
||||
"Cutting speed in the XY\n"
|
||||
"plane in units per minute"
|
||||
)
|
||||
grid1.addWidget(fr_rapid_label, 4, 0)
|
||||
self.cncfeedrate_rapid_entry = LengthEntry()
|
||||
grid1.addWidget(self.cncfeedrate_rapid_entry, 4, 1)
|
||||
|
||||
# End move extra cut
|
||||
self.extracut_cb = FCCheckBox(label='Re-cut 1st pt.')
|
||||
self.extracut_cb.setToolTip(
|
||||
"In order to remove possible\n"
|
||||
"copper leftovers where first cut\n"
|
||||
"meet with last cut, we generate an\n"
|
||||
"extended cut over the first cut section."
|
||||
)
|
||||
grid1.addWidget(self.extracut_cb, 5, 0)
|
||||
|
||||
# Probe depth
|
||||
self.pdepth_label = QtWidgets.QLabel("Probe Z depth:")
|
||||
self.pdepth_label.setToolTip(
|
||||
"The maximum depth that the probe is allowed\n"
|
||||
"to probe. Negative value, in current units."
|
||||
)
|
||||
grid1.addWidget(self.pdepth_label, 6, 0)
|
||||
self.pdepth_entry = FCEntry()
|
||||
grid1.addWidget(self.pdepth_entry, 6, 1)
|
||||
|
||||
# Probe feedrate
|
||||
self.feedrate_probe_label = QtWidgets.QLabel("Feedrate Probe:")
|
||||
self.feedrate_probe_label.setToolTip(
|
||||
"The feedrate used while the probe is probing."
|
||||
)
|
||||
grid1.addWidget(self.feedrate_probe_label, 7, 0)
|
||||
self.feedrate_probe_entry = FCEntry()
|
||||
grid1.addWidget(self.feedrate_probe_entry, 7, 1)
|
||||
|
||||
# Fast Move from Z Toolchange
|
||||
fplungelabel = QtWidgets.QLabel('Fast Plunge:')
|
||||
fplungelabel.setToolTip(
|
||||
"By checking this, the vertical move from\n"
|
||||
"Z_Toolchange to Z_move is done with G0,\n"
|
||||
"meaning the fastest speed available.\n"
|
||||
"WARNING: the move is done at Toolchange X,Y coords."
|
||||
)
|
||||
self.fplunge_cb = FCCheckBox()
|
||||
grid1.addWidget(fplungelabel, 8, 0)
|
||||
grid1.addWidget(self.fplunge_cb, 8, 1)
|
||||
|
||||
# Size of trace segment on X axis
|
||||
segx_label = QtWidgets.QLabel("Seg. X size:")
|
||||
segx_label.setToolTip(
|
||||
"The size of the trace segment on the X axis.\n"
|
||||
"Useful for auto-leveling.\n"
|
||||
"A value of 0 means no segmentation on the X axis."
|
||||
)
|
||||
grid1.addWidget(segx_label, 9, 0)
|
||||
self.segx_entry = FCEntry()
|
||||
grid1.addWidget(self.segx_entry, 9, 1)
|
||||
|
||||
# Size of trace segment on Y axis
|
||||
segy_label = QtWidgets.QLabel("Seg. Y size:")
|
||||
segy_label.setToolTip(
|
||||
"The size of the trace segment on the Y axis.\n"
|
||||
"Useful for auto-leveling.\n"
|
||||
"A value of 0 means no segmentation on the Y axis."
|
||||
)
|
||||
grid1.addWidget(segy_label, 10, 0)
|
||||
self.segy_entry = FCEntry()
|
||||
grid1.addWidget(self.segy_entry, 10, 1)
|
||||
|
||||
self.layout.addStretch()
|
||||
|
||||
@@ -3635,44 +3778,15 @@ class GeometryOptPrefGroupUI(OptionsGroupUI):
|
||||
self.toolchangez_entry = LengthEntry()
|
||||
grid1.addWidget(self.toolchangez_entry, 5, 1)
|
||||
|
||||
# Toolchange X,Y
|
||||
toolchange_xy_label = QtWidgets.QLabel('Toolchange X,Y:')
|
||||
toolchange_xy_label.setToolTip(
|
||||
"Toolchange X,Y position."
|
||||
)
|
||||
grid1.addWidget(toolchange_xy_label, 6, 0)
|
||||
self.toolchangexy_entry = FCEntry()
|
||||
grid1.addWidget(self.toolchangexy_entry, 6, 1)
|
||||
|
||||
# Start move Z
|
||||
startzlabel = QtWidgets.QLabel('Start move Z:')
|
||||
startzlabel.setToolTip(
|
||||
"Height of the tool just after starting the work.\n"
|
||||
"Delete the value if you don't need this feature."
|
||||
)
|
||||
grid1.addWidget(startzlabel, 7, 0)
|
||||
self.gstartz_entry = FloatEntry()
|
||||
grid1.addWidget(self.gstartz_entry, 7, 1)
|
||||
|
||||
# End move Z
|
||||
endzlabel = QtWidgets.QLabel('End move Z:')
|
||||
endzlabel.setToolTip(
|
||||
"Height of the tool after\n"
|
||||
"the last move at the end of the job."
|
||||
)
|
||||
grid1.addWidget(endzlabel, 8, 0)
|
||||
self.gendz_entry = LengthEntry()
|
||||
grid1.addWidget(self.gendz_entry, 8, 1)
|
||||
|
||||
# Feedrate X-Y
|
||||
frlabel = QtWidgets.QLabel('Feed Rate X-Y:')
|
||||
frlabel.setToolTip(
|
||||
"Cutting speed in the XY\n"
|
||||
"plane in units per minute"
|
||||
)
|
||||
grid1.addWidget(frlabel, 9, 0)
|
||||
grid1.addWidget(frlabel, 6, 0)
|
||||
self.cncfeedrate_entry = LengthEntry()
|
||||
grid1.addWidget(self.cncfeedrate_entry, 9, 1)
|
||||
grid1.addWidget(self.cncfeedrate_entry, 6, 1)
|
||||
|
||||
# Feedrate Z (Plunge)
|
||||
frz_label = QtWidgets.QLabel('Feed Rate Z:')
|
||||
@@ -3681,29 +3795,9 @@ class GeometryOptPrefGroupUI(OptionsGroupUI):
|
||||
"plane in units per minute.\n"
|
||||
"It is called also Plunge."
|
||||
)
|
||||
grid1.addWidget(frz_label, 10, 0)
|
||||
grid1.addWidget(frz_label, 7, 0)
|
||||
self.cncplunge_entry = LengthEntry()
|
||||
grid1.addWidget(self.cncplunge_entry, 10, 1)
|
||||
|
||||
# Feedrate rapids
|
||||
fr_rapid_label = QtWidgets.QLabel('Feed Rate Rapids:')
|
||||
fr_rapid_label.setToolTip(
|
||||
"Cutting speed in the XY\n"
|
||||
"plane in units per minute"
|
||||
)
|
||||
grid1.addWidget(fr_rapid_label, 11, 0)
|
||||
self.cncfeedrate_rapid_entry = LengthEntry()
|
||||
grid1.addWidget(self.cncfeedrate_rapid_entry, 11, 1)
|
||||
|
||||
# End move extra cut
|
||||
self.extracut_cb = FCCheckBox(label='Cut over 1st pt.')
|
||||
self.extracut_cb.setToolTip(
|
||||
"In order to remove possible\n"
|
||||
"copper leftovers where first cut\n"
|
||||
"meet with last cut, we generate an\n"
|
||||
"extended cut over the first cut section."
|
||||
)
|
||||
grid1.addWidget(self.extracut_cb, 12, 0)
|
||||
grid1.addWidget(self.cncplunge_entry, 7, 1)
|
||||
|
||||
# Spindle Speed
|
||||
spdlabel = QtWidgets.QLabel('Spindle speed:')
|
||||
@@ -3711,9 +3805,9 @@ class GeometryOptPrefGroupUI(OptionsGroupUI):
|
||||
"Speed of the spindle\n"
|
||||
"in RPM (optional)"
|
||||
)
|
||||
grid1.addWidget(spdlabel, 13, 0)
|
||||
grid1.addWidget(spdlabel, 8, 0)
|
||||
self.cncspindlespeed_entry = IntEntry(allow_empty=True)
|
||||
grid1.addWidget(self.cncspindlespeed_entry, 13, 1)
|
||||
grid1.addWidget(self.cncspindlespeed_entry, 8, 1)
|
||||
|
||||
# Dwell
|
||||
self.dwell_cb = FCCheckBox(label='Dwell:')
|
||||
@@ -3721,14 +3815,14 @@ class GeometryOptPrefGroupUI(OptionsGroupUI):
|
||||
"Pause to allow the spindle to reach its\n"
|
||||
"speed before cutting."
|
||||
)
|
||||
dwelltime = QtWidgets.QLabel('Duration [m-sec.]:')
|
||||
dwelltime = QtWidgets.QLabel('Duration:')
|
||||
dwelltime.setToolTip(
|
||||
"Number of milliseconds for spindle to dwell."
|
||||
)
|
||||
self.dwelltime_entry = FCEntry()
|
||||
grid1.addWidget(self.dwell_cb, 14, 0)
|
||||
grid1.addWidget(dwelltime, 15, 0)
|
||||
grid1.addWidget(self.dwelltime_entry, 15, 1)
|
||||
grid1.addWidget(self.dwell_cb, 9, 0)
|
||||
grid1.addWidget(dwelltime, 10, 0)
|
||||
grid1.addWidget(self.dwelltime_entry, 10, 1)
|
||||
|
||||
self.ois_dwell = OptionalInputSection(self.dwell_cb, [self.dwelltime_entry])
|
||||
|
||||
@@ -3738,63 +3832,10 @@ class GeometryOptPrefGroupUI(OptionsGroupUI):
|
||||
"The postprocessor file that dictates\n"
|
||||
"Machine Code output."
|
||||
)
|
||||
grid1.addWidget(pp_label, 16, 0)
|
||||
grid1.addWidget(pp_label, 11, 0)
|
||||
self.pp_geometry_name_cb = FCComboBox()
|
||||
self.pp_geometry_name_cb.setFocusPolicy(Qt.StrongFocus)
|
||||
grid1.addWidget(self.pp_geometry_name_cb, 16, 1)
|
||||
|
||||
# Probe depth
|
||||
self.pdepth_label = QtWidgets.QLabel("Probe Z depth:")
|
||||
self.pdepth_label.setToolTip(
|
||||
"The maximum depth that the probe is allowed\n"
|
||||
"to probe. Negative value, in current units."
|
||||
)
|
||||
grid1.addWidget(self.pdepth_label, 17, 0)
|
||||
self.pdepth_entry = FCEntry()
|
||||
grid1.addWidget(self.pdepth_entry, 17, 1)
|
||||
|
||||
# Probe feedrate
|
||||
self.feedrate_probe_label = QtWidgets.QLabel("Feedrate Probe:")
|
||||
self.feedrate_probe_label.setToolTip(
|
||||
"The feedrate used while the probe is probing."
|
||||
)
|
||||
grid1.addWidget(self.feedrate_probe_label, 18, 0)
|
||||
self.feedrate_probe_entry = FCEntry()
|
||||
grid1.addWidget(self.feedrate_probe_entry, 18, 1)
|
||||
|
||||
# Fast Move from Z Toolchange
|
||||
fplungelabel = QtWidgets.QLabel('Fast Plunge:')
|
||||
fplungelabel.setToolTip(
|
||||
"By checking this, the vertical move from\n"
|
||||
"Z_Toolchange to Z_move is done with G0,\n"
|
||||
"meaning the fastest speed available.\n"
|
||||
"WARNING: the move is done at Toolchange X,Y coords."
|
||||
)
|
||||
self.fplunge_cb = FCCheckBox()
|
||||
grid1.addWidget(fplungelabel, 19, 0)
|
||||
grid1.addWidget(self.fplunge_cb, 19, 1)
|
||||
|
||||
# Size of trace segment on X axis
|
||||
segx_label = QtWidgets.QLabel("Seg. X size:")
|
||||
segx_label.setToolTip(
|
||||
"The size of the trace segment on the X axis.\n"
|
||||
"Useful for auto-leveling.\n"
|
||||
"A value of 0 means no segmentation on the X axis."
|
||||
)
|
||||
grid1.addWidget(segx_label, 20, 0)
|
||||
self.segx_entry = FCEntry()
|
||||
grid1.addWidget(self.segx_entry, 20, 1)
|
||||
|
||||
# Size of trace segment on Y axis
|
||||
segy_label = QtWidgets.QLabel("Seg. Y size:")
|
||||
segy_label.setToolTip(
|
||||
"The size of the trace segment on the Y axis.\n"
|
||||
"Useful for auto-leveling.\n"
|
||||
"A value of 0 means no segmentation on the Y axis."
|
||||
)
|
||||
grid1.addWidget(segy_label, 21, 0)
|
||||
self.segy_entry = FCEntry()
|
||||
grid1.addWidget(self.segy_entry, 21, 1)
|
||||
grid1.addWidget(self.pp_geometry_name_cb, 11, 1)
|
||||
|
||||
self.layout.addStretch()
|
||||
|
||||
|
||||
Reference in New Issue
Block a user