- added support in Excellon parser for autodetection of Excellon file format for the Excellon files generate by the following ECAD sw: DipTrace, Eagle, Altium, Sprint Layout

README.md

@@ -17,6 +17,7 @@ CAD program, and create G-Code for Isolation routing.
 - update the order of event handlers connection in Editors to first connect new handlers then disconnect old handlers. It seems that if nothing is connected some VispY functions like canvas panning no longer works if there is at least once nothing connected to the 'mouse_move' event
 - Excellon Editor: update so always there is a tool selected even after the Execllon object was just edited; before it always required a click inside of the tool table, not you do it only if needed.
 - fixed the menu File -> Edit -> Edit/Close Editor entry to reflect the status of the app (Editor active or not)
+- added support in Excellon parser for autodetection of Excellon file format for the Excellon files generate by the following ECAD sw: DipTrace, Eagle, Altium, Sprint Layout
 
 14.04.2019
 

camlib.py

@@ -3738,6 +3738,8 @@ class Excellon(Geometry):
         self.excellon_format_upper_mm = excellon_format_upper_mm or self.defaults["excellon_format_upper_mm"]
         self.excellon_format_lower_mm = excellon_format_lower_mm or self.defaults["excellon_format_lower_mm"]
         self.excellon_units = excellon_units or self.defaults["excellon_units"]
+        # detected Excellon format is stored here:
+        self.excellon_format = None
 
         # Attributes to be included in serialization
         # Always append to it because it carries contents
@@ -3766,10 +3768,10 @@ class Excellon(Geometry):
         # Ignored in the parser
         #self.fmat_re = re.compile(r'^FMAT,([12])$')
 
-        # Number format and units
+        # Uunits and possible Excellon zeros and possible Excellon format
         # INCH uses 6 digits
         # METRIC uses 5/6
-        self.units_re = re.compile(r'^(INCH|METRIC)(?:,([TL])Z)?.*$')
+        self.units_re = re.compile(r'^(INCH|METRIC)(?:,([TL])Z)?,?(\d*\.\d+)?.*$')
 
         # Tool definition/parameters (?= is look-ahead
         # NOTE: This might be an overkill!
@@ -3831,6 +3833,10 @@ class Excellon(Geometry):
         # Allegro Excellon format support
         self.tool_units_re = re.compile(r'(\;\s*Holesize \d+.\s*\=\s*(\d+.\d+).*(MILS|MM))')
 
+        # Altium Excellon format support
+        # it's a comment like this: ";FILE_FORMAT=2:5"
+        self.altium_format = re.compile(r'^;\s*(?:FILE_FORMAT)?(?:Format)?[=|:]\s*(\d+)[:|.](\d+).*$')
+
         # Parse coordinates
         self.leadingzeros_re = re.compile(r'^[-\+]?(0*)(\d*)')
 
@@ -3946,6 +3952,16 @@ class Excellon(Geometry):
                                 log.debug("  Tool definition: %s %s" % (name_tool, spec))
                             spec['solid_geometry'] = []
                             continue
+                    # search for Altium Excellon Format / Sprint Layout who is included as a comment
+                    match = self.altium_format.search(eline)
+                    if match:
+                        self.excellon_format_upper_mm = match.group(1)
+                        self.excellon_format_lower_mm = match.group(2)
+
+                        self.excellon_format_upper_in = match.group(1)
+                        self.excellon_format_lower_in = match.group(2)
+                        log.warning("Altium Excellon format preset found: %s:%s" % (match.group(1), match.group(2)))
+                        continue
                     else:
                         log.warning("Line ignored, it's a comment: %s" % eline)
                 else:
@@ -4373,8 +4389,16 @@ class Excellon(Geometry):
                     if match:
                         self.units_found = match.group(1)
                         self.zeros = match.group(2)  # "T" or "L". Might be empty
-
+                        self.excellon_format = match.group(3)
-                        # self.units = {"INCH": "IN", "METRIC": "MM"}[match.group(1)]
+                        if self.excellon_format:
+                            upper = len(self.excellon_format.partition('.')[0])
+                            lower = len(self.excellon_format.partition('.')[2])
+                            if self.units == 'MM':
+                                self.excellon_format_upper_mm = upper
+                                self.excellon_format_lower_mm = lower
+                            else:
+                                self.excellon_format_upper_in = upper
+                                self.excellon_format_lower_in = lower
 
                         # Modified for issue #80
                         self.convert_units({"INCH": "IN", "METRIC": "MM"}[self.units_found])
@@ -4423,8 +4447,16 @@ class Excellon(Geometry):
                 if match:
                     self.units_found = match.group(1)
                     self.zeros = match.group(2)  # "T" or "L". Might be empty
-
+                    self.excellon_format = match.group(3)
-                    # self.units = {"INCH": "IN", "METRIC": "MM"}[match.group(1)]
+                    if self.excellon_format:
+                        upper = len(self.excellon_format.partition('.')[0])
+                        lower = len(self.excellon_format.partition('.')[2])
+                        if self.units == 'MM':
+                            self.excellon_format_upper_mm = upper
+                            self.excellon_format_lower_mm = lower
+                        else:
+                            self.excellon_format_upper_in = upper
+                            self.excellon_format_lower_in = lower
 
                     # Modified for issue #80
                     self.convert_units({"INCH": "IN", "METRIC": "MM"}[self.units_found])