# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2019-10-19 04:46+0300\n"
"PO-Revision-Date: 2019-10-19 04:46+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.2.3\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Poedit-Basepath: ../../..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: doc\n"
"X-Poedit-SearchPathExcluded-2: tests\n"

#: FlatCAMApp.py:413
msgid "FlatCAM is initializing ..."
msgstr "FlatCAM is initializing ..."

#: FlatCAMApp.py:1362
msgid "Could not find the Language files. The App strings are missing."
msgstr "Could not find the Language files. The App strings are missing."

#: FlatCAMApp.py:1763
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."
msgstr ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."

#: FlatCAMApp.py:1779
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"

#: FlatCAMApp.py:1985
msgid "Detachable Tabs"
msgstr "Detachable Tabs"

#: FlatCAMApp.py:2485
msgid ""
"Type >help< to get started\n"
"\n"
msgstr ""
"Type >help< to get started\n"
"\n"

#: FlatCAMApp.py:2710 FlatCAMApp.py:8829
msgid "New Project - Not saved"
msgstr "New Project - Not saved"

#: FlatCAMApp.py:2784 FlatCAMApp.py:8887 FlatCAMApp.py:8923 FlatCAMApp.py:8963
#: FlatCAMApp.py:9727 FlatCAMApp.py:10981 FlatCAMApp.py:11034
msgid ""
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"Canvas initialization started.\n"
"Canvas initialization finished in"

#: FlatCAMApp.py:2786
msgid "Executing Tcl Script ..."
msgstr "Executing Tcl Script ..."

#: FlatCAMApp.py:2839 ObjectCollection.py:90 flatcamTools/ToolImage.py:219
#: flatcamTools/ToolPcbWizard.py:300 flatcamTools/ToolPcbWizard.py:323
msgid "Open cancelled."
msgstr "Open cancelled."

#: FlatCAMApp.py:2855
msgid "Open Config file failed."
msgstr "Open Config file failed."

#: FlatCAMApp.py:2870
msgid "Open Script file failed."
msgstr "Open Script file failed."

#: FlatCAMApp.py:2896
msgid "Open Excellon file failed."
msgstr "Open Excellon file failed."

#: FlatCAMApp.py:2909
msgid "Open GCode file failed."
msgstr "Open GCode file failed."

#: FlatCAMApp.py:2922
msgid "Open Gerber file failed."
msgstr "Open Gerber file failed."

#: FlatCAMApp.py:3246
msgid "Select a Geometry, Gerber or Excellon Object to edit."
msgstr "Select a Geometry, Gerber or Excellon Object to edit."

#: FlatCAMApp.py:3260
msgid ""
"Simultanoeus editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."
msgstr ""
"Simultanoeus editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."

#: FlatCAMApp.py:3315
msgid "Editor is activated ..."
msgstr "Editor is activated ..."

#: FlatCAMApp.py:3336
msgid "Do you want to save the edited object?"
msgstr "Do you want to save the edited object?"

#: FlatCAMApp.py:3337 flatcamGUI/FlatCAMGUI.py:1924
msgid "Close Editor"
msgstr "Close Editor"

#: FlatCAMApp.py:3340 FlatCAMApp.py:5026 FlatCAMApp.py:7626 FlatCAMApp.py:8736
#: FlatCAMTranslation.py:97 FlatCAMTranslation.py:171
#: flatcamGUI/PreferencesUI.py:930
msgid "Yes"
msgstr "Yes"

#: FlatCAMApp.py:3341 FlatCAMApp.py:5027 FlatCAMApp.py:7627 FlatCAMApp.py:8737
#: FlatCAMTranslation.py:98 FlatCAMTranslation.py:172
#: flatcamGUI/PreferencesUI.py:931 flatcamGUI/PreferencesUI.py:3783
#: flatcamGUI/PreferencesUI.py:4175 flatcamTools/ToolNonCopperClear.py:184
#: flatcamTools/ToolPaint.py:161
msgid "No"
msgstr "No"

#: FlatCAMApp.py:3342 FlatCAMApp.py:5028 FlatCAMApp.py:5898 FlatCAMApp.py:7024
#: FlatCAMApp.py:8738
msgid "Cancel"
msgstr "Cancel"

#: FlatCAMApp.py:3370
msgid "Object empty after edit."
msgstr "Object empty after edit."

#: FlatCAMApp.py:3419 FlatCAMApp.py:3439 FlatCAMApp.py:3454
msgid "Select a Gerber, Geometry or Excellon Object to update."
msgstr "Select a Gerber, Geometry or Excellon Object to update."

#: FlatCAMApp.py:3423
msgid "is updated, returning to App..."
msgstr "is updated, returning to App..."

#: FlatCAMApp.py:3819 FlatCAMApp.py:3873 FlatCAMApp.py:4890
msgid "Could not load defaults file."
msgstr "Could not load defaults file."

#: FlatCAMApp.py:3832 FlatCAMApp.py:3882 FlatCAMApp.py:4900
msgid "Failed to parse defaults file."
msgstr "Failed to parse defaults file."

#: FlatCAMApp.py:3853 FlatCAMApp.py:3857
msgid "Import FlatCAM Preferences"
msgstr "Import FlatCAM Preferences"

#: FlatCAMApp.py:3864
msgid "FlatCAM preferences import cancelled."
msgstr "FlatCAM preferences import cancelled."

#: FlatCAMApp.py:3887
msgid "Imported Defaults from"
msgstr "Imported Defaults from"

#: FlatCAMApp.py:3907 FlatCAMApp.py:3912 flatcamGUI/FlatCAMGUI.py:3972
msgid "Export FlatCAM Preferences"
msgstr "Export FlatCAM Preferences"

#: FlatCAMApp.py:3920
msgid "FlatCAM preferences export cancelled."
msgstr "FlatCAM preferences export cancelled."

#: FlatCAMApp.py:3929 FlatCAMApp.py:9908 FlatCAMApp.py:10035
#: FlatCAMApp.py:10177 FlatCAMApp.py:10236 FlatCAMApp.py:10353
#: FlatCAMApp.py:10492 FlatCAMObj.py:6312
#: flatcamEditors/FlatCAMTextEditor.py:217 flatcamGUI/FlatCAMGUI.py:3990
#: flatcamTools/ToolSolderPaste.py:1453
msgid ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."
msgstr ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."

#: FlatCAMApp.py:3942
msgid "Could not load preferences file."
msgstr "Could not load preferences file."

#: FlatCAMApp.py:3962
msgid "Failed to write defaults to file."
msgstr "Failed to write defaults to file."

#: FlatCAMApp.py:3968
msgid "Exported preferences to"
msgstr "Exported preferences to"

#: FlatCAMApp.py:3985
msgid "FlatCAM Preferences Folder opened."
msgstr "FlatCAM Preferences Folder opened."

#: FlatCAMApp.py:4068
msgid "Failed to open recent files file for writing."
msgstr "Failed to open recent files file for writing."

#: FlatCAMApp.py:4079
msgid "Failed to open recent projects file for writing."
msgstr "Failed to open recent projects file for writing."

#: FlatCAMApp.py:4165 flatcamParsers/ParseExcellon.py:880
#: flatcamTools/ToolSolderPaste.py:1239
msgid "An internal error has ocurred. See shell.\n"
msgstr "An internal error has ocurred. See shell.\n"

#: FlatCAMApp.py:4166
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""
"Object ({kind}) failed because: {error} \n"
"\n"

#: FlatCAMApp.py:4187
msgid "Converting units to "
msgstr "Converting units to "

#: FlatCAMApp.py:4278
msgid ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, ClearCopper,\n"
"# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
"GeoCutout, GeoUnion, GetNames,\n"
"# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillDrills,\n"
"# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
"OpenGerber, OpenProject,\n"
"# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
"SetSys, Skew, SubtractPoly,\n"
"# SubtractRectangle, Version, WriteGCode\n"
"#\n"
"\n"
msgstr ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, ClearCopper,\n"
"# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
"GeoCutout, GeoUnion, GetNames,\n"
"# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillDrills,\n"
"# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
"OpenGerber, OpenProject,\n"
"# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
"SetSys, Skew, SubtractPoly,\n"
"# SubtractRectangle, Version, WriteGCode\n"
"#\n"
"\n"

#: FlatCAMApp.py:4340 FlatCAMApp.py:4343 FlatCAMApp.py:4346 FlatCAMApp.py:4349
#: FlatCAMApp.py:4352 FlatCAMApp.py:4355
#, python-brace-format
msgid ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"
msgstr ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"

#: FlatCAMApp.py:4370 FlatCAMApp.py:7104 FlatCAMObj.py:265 FlatCAMObj.py:280
#: FlatCAMObj.py:296 FlatCAMObj.py:376 flatcamTools/ToolMove.py:220
msgid "Plotting"
msgstr "Plotting"

#: FlatCAMApp.py:4464 flatcamGUI/FlatCAMGUI.py:462
msgid "About FlatCAM"
msgstr "About FlatCAM"

#: FlatCAMApp.py:4493
msgid "2D Computer-Aided Printed Circuit Board Manufacturing"
msgstr "2D Computer-Aided Printed Circuit Board Manufacturing"

#: FlatCAMApp.py:4494
msgid "Development"
msgstr "Development"

#: FlatCAMApp.py:4495
msgid "DOWNLOAD"
msgstr "DOWNLOAD"

#: FlatCAMApp.py:4496
msgid "Issue tracker"
msgstr "Issue tracker"

#: FlatCAMApp.py:4500 FlatCAMApp.py:4820 flatcamGUI/FlatCAMGUI.py:3792
msgid "Close"
msgstr "Close"

#: FlatCAMApp.py:4515
msgid ""
"\n"
"Licensed under the MIT license:\n"
"http://www.opensource.org/licenses/mit-license.php\n"
"\n"
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."
msgstr ""
"\n"
"Licensed under the MIT license:\n"
"http://www.opensource.org/licenses/mit-license.php\n"
"\n"
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."

#: FlatCAMApp.py:4541
msgid ""
"Some of the icons used are from the following sources:<br><div>Icons made by "
"<a href=\"https://www.flaticon.com/authors/freepik\" title=\"Freepik"
"\">Freepik</a> from <a href=\"https://www.flaticon.com/\"             title="
"\"Flaticon\">www.flaticon.com</a></div>Icons by <a target=\"_blank\" href="
"\"https://icons8.com\">Icons8</a>"
msgstr ""
"Some of the icons used are from the following sources:<br><div>Icons made by "
"<a href=\"https://www.flaticon.com/authors/freepik\" title=\"Freepik"
"\">Freepik</a> from <a href=\"https://www.flaticon.com/\"             title="
"\"Flaticon\">www.flaticon.com</a></div>Icons by <a target=\"_blank\" href="
"\"https://icons8.com\">Icons8</a>"

#: FlatCAMApp.py:4572
msgid "Splash"
msgstr "Splash"

#: FlatCAMApp.py:4578
msgid "Programmers"
msgstr "Programmers"

#: FlatCAMApp.py:4584
msgid "Translators"
msgstr "Translators"

#: FlatCAMApp.py:4590
msgid "License"
msgstr "License"

#: FlatCAMApp.py:4596
msgid "Attributions"
msgstr "Attributions"

#: FlatCAMApp.py:4617
msgid "Programmer"
msgstr "Programmer"

#: FlatCAMApp.py:4618
msgid "Status"
msgstr "Status"

#: FlatCAMApp.py:4620
msgid "Program Author"
msgstr "Program Author"

#: FlatCAMApp.py:4624
msgid "Maintainer >= 2019"
msgstr "Maintainer >= 2019"

#: FlatCAMApp.py:4683
msgid "Language"
msgstr "Language"

#: FlatCAMApp.py:4684
msgid "Translator"
msgstr "Translator"

#: FlatCAMApp.py:4685
msgid "Corrections"
msgstr "Corrections"

#: FlatCAMApp.py:4686
msgid "E-mail"
msgstr "E-mail"

#: FlatCAMApp.py:4792 FlatCAMApp.py:4800 FlatCAMApp.py:7644
#: flatcamGUI/FlatCAMGUI.py:446
msgid "Bookmarks Manager"
msgstr "Bookmarks Manager"

#: FlatCAMApp.py:4811
msgid ""
"This entry will resolve to another website if:\n"
"\n"
"1. FlatCAM.org website is down\n"
"2. Someone forked FlatCAM project and wants to point\n"
"to his own website\n"
"\n"
"If you can't get any informations about FlatCAM beta\n"
"use the YouTube channel link from the Help menu."
msgstr ""
"This entry will resolve to another website if:\n"
"\n"
"1. FlatCAM.org website is down\n"
"2. Someone forked FlatCAM project and wants to point\n"
"to his own website\n"
"\n"
"If you can't get any informations about FlatCAM beta\n"
"use the YouTube channel link from the Help menu."

#: FlatCAMApp.py:4818
msgid "Alternative website"
msgstr "Alternative website"

#: FlatCAMApp.py:5021 FlatCAMTranslation.py:166
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"

#: FlatCAMApp.py:5024 FlatCAMApp.py:8734 FlatCAMTranslation.py:169
msgid "Save changes"
msgstr "Save changes"

#: FlatCAMApp.py:5254
msgid "Selected Excellon file extensions registered with FlatCAM."
msgstr "Selected Excellon file extensions registered with FlatCAM."

#: FlatCAMApp.py:5276
msgid "Selected GCode file extensions registered with FlatCAM."
msgstr "Selected GCode file extensions registered with FlatCAM."

#: FlatCAMApp.py:5298
msgid "Selected Gerber file extensions registered with FlatCAM."
msgstr "Selected Gerber file extensions registered with FlatCAM."

#: FlatCAMApp.py:5459 FlatCAMApp.py:5515 FlatCAMApp.py:5543
msgid "At least two objects are required for join. Objects currently selected"
msgstr "At least two objects are required for join. Objects currently selected"

#: FlatCAMApp.py:5468
msgid ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."

#: FlatCAMApp.py:5510
msgid "Failed. Excellon joining works only on Excellon objects."
msgstr "Failed. Excellon joining works only on Excellon objects."

#: FlatCAMApp.py:5538
msgid "Failed. Gerber joining works only on Gerber objects."
msgstr "Failed. Gerber joining works only on Gerber objects."

#: FlatCAMApp.py:5568 FlatCAMApp.py:5605
msgid "Failed. Select a Geometry Object and try again."
msgstr "Failed. Select a Geometry Object and try again."

#: FlatCAMApp.py:5573 FlatCAMApp.py:5610
msgid "Expected a FlatCAMGeometry, got"
msgstr "Expected a FlatCAMGeometry, got"

#: FlatCAMApp.py:5587
msgid "A Geometry object was converted to MultiGeo type."
msgstr "A Geometry object was converted to MultiGeo type."

#: FlatCAMApp.py:5625
msgid "A Geometry object was converted to SingleGeo type."
msgstr "A Geometry object was converted to SingleGeo type."

#: FlatCAMApp.py:5892
msgid "Toggle Units"
msgstr "Toggle Units"

#: FlatCAMApp.py:5894
msgid "Change project units ..."
msgstr "Change project units ..."

#: FlatCAMApp.py:5895
msgid ""
"Changing the units of the project causes all geometrical properties of all "
"objects to be scaled accordingly.\n"
"Continue?"
msgstr ""
"Changing the units of the project causes all geometrical properties of all "
"objects to be scaled accordingly.\n"
"Continue?"

#: FlatCAMApp.py:5897 FlatCAMApp.py:6947 FlatCAMApp.py:7023 FlatCAMApp.py:9047
#: FlatCAMApp.py:9061 FlatCAMApp.py:9409 FlatCAMApp.py:9420
msgid "Ok"
msgstr "Ok"

#: FlatCAMApp.py:5946
msgid "Converted units to"
msgstr "Converted units to"

#: FlatCAMApp.py:5958
msgid " Units conversion cancelled."
msgstr " Units conversion cancelled."

#: FlatCAMApp.py:6935 flatcamTools/ToolNonCopperClear.py:564
#: flatcamTools/ToolNonCopperClear.py:967 flatcamTools/ToolPaint.py:478
#: flatcamTools/ToolSolderPaste.py:472 flatcamTools/ToolSolderPaste.py:799
msgid "Please enter a tool diameter with non-zero value, in Float format."
msgstr "Please enter a tool diameter with non-zero value, in Float format."

#: FlatCAMApp.py:6940 flatcamTools/ToolNonCopperClear.py:568
#: flatcamTools/ToolPaint.py:482 flatcamTools/ToolSolderPaste.py:476
msgid "Adding Tool cancelled"
msgstr "Adding Tool cancelled"

#: FlatCAMApp.py:6943
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."

#: FlatCAMApp.py:7018
msgid "Delete objects"
msgstr "Delete objects"

#: FlatCAMApp.py:7021
msgid ""
"Are you sure you want to permanently delete\n"
"the selected objects?"
msgstr ""
"Are you sure you want to permanently delete\n"
"the selected objects?"

#: FlatCAMApp.py:7052
msgid "Object(s) deleted"
msgstr "Object(s) deleted"

#: FlatCAMApp.py:7056
msgid "Failed. No object(s) selected..."
msgstr "Failed. No object(s) selected..."

#: FlatCAMApp.py:7058
msgid "Save the work in Editor and try again ..."
msgstr "Save the work in Editor and try again ..."

#: FlatCAMApp.py:7088
msgid "Object deleted"
msgstr "Object deleted"

#: FlatCAMApp.py:7115
msgid "Click to set the origin ..."
msgstr "Click to set the origin ..."

#: FlatCAMApp.py:7137
msgid "Setting Origin..."
msgstr "Setting Origin..."

#: FlatCAMApp.py:7149
msgid "Origin set"
msgstr "Origin set"

#: FlatCAMApp.py:7156
msgid "Origin coordinates specified but incomplete."
msgstr "Origin coordinates specified but incomplete."

#: FlatCAMApp.py:7214
msgid "Jump to ..."
msgstr "Jump to ..."

#: FlatCAMApp.py:7215
msgid "Enter the coordinates in format X,Y:"
msgstr "Enter the coordinates in format X,Y:"

#: FlatCAMApp.py:7223
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr "Wrong coordinates. Enter coordinates in format: X,Y"

#: FlatCAMApp.py:7271 flatcamEditors/FlatCAMExcEditor.py:3488
#: flatcamEditors/FlatCAMExcEditor.py:3496
#: flatcamEditors/FlatCAMGeoEditor.py:3901
#: flatcamEditors/FlatCAMGeoEditor.py:3916
#: flatcamEditors/FlatCAMGrbEditor.py:1068
#: flatcamEditors/FlatCAMGrbEditor.py:1172
#: flatcamEditors/FlatCAMGrbEditor.py:1446
#: flatcamEditors/FlatCAMGrbEditor.py:1704
#: flatcamEditors/FlatCAMGrbEditor.py:4300
#: flatcamEditors/FlatCAMGrbEditor.py:4315 flatcamGUI/FlatCAMGUI.py:2769
#: flatcamGUI/FlatCAMGUI.py:2781
msgid "Done."
msgstr "Done."

#: FlatCAMApp.py:7415 FlatCAMApp.py:7483
msgid "No object is selected. Select an object and try again."
msgstr "No object is selected. Select an object and try again."

#: FlatCAMApp.py:7503
msgid ""
"Aborting. The current task will be gracefully closed as soon as possible..."
msgstr ""
"Aborting. The current task will be gracefully closed as soon as possible..."

#: FlatCAMApp.py:7509
msgid "The current task was gracefully closed on user request..."
msgstr "The current task was gracefully closed on user request..."

#: FlatCAMApp.py:7526 FlatCAMApp.py:7590
msgid "Preferences"
msgstr "Preferences"

#: FlatCAMApp.py:7586
msgid "Preferences edited but not saved."
msgstr "Preferences edited but not saved."

#: FlatCAMApp.py:7621
msgid ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"
msgstr ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"

#: FlatCAMApp.py:7623 flatcamGUI/FlatCAMGUI.py:214
#: flatcamGUI/FlatCAMGUI.py:1097
msgid "Save Preferences"
msgstr "Save Preferences"

#: FlatCAMApp.py:7636
msgid "Preferences saved."
msgstr "Preferences saved."

#: FlatCAMApp.py:7641 FlatCAMApp.py:9635 FlatCAMApp.py:10987 FlatCAMObj.py:6070
#: flatcamTools/ToolSolderPaste.py:1329
msgid "Code Editor"
msgstr "Code Editor"

#: FlatCAMApp.py:7659
msgid "No object selected to Flip on Y axis."
msgstr "No object selected to Flip on Y axis."

#: FlatCAMApp.py:7685
msgid "Flip on Y axis done."
msgstr "Flip on Y axis done."

#: FlatCAMApp.py:7688 FlatCAMApp.py:7731
#: flatcamEditors/FlatCAMGrbEditor.py:5756
msgid "Flip action was not executed."
msgstr "Flip action was not executed."

#: FlatCAMApp.py:7702
msgid "No object selected to Flip on X axis."
msgstr "No object selected to Flip on X axis."

#: FlatCAMApp.py:7728
msgid "Flip on X axis done."
msgstr "Flip on X axis done."

#: FlatCAMApp.py:7745
msgid "No object selected to Rotate."
msgstr "No object selected to Rotate."

#: FlatCAMApp.py:7748 FlatCAMApp.py:7796 FlatCAMApp.py:7829
msgid "Transform"
msgstr "Transform"

#: FlatCAMApp.py:7748 FlatCAMApp.py:7796 FlatCAMApp.py:7829
msgid "Enter the Angle value:"
msgstr "Enter the Angle value:"

#: FlatCAMApp.py:7779
msgid "Rotation done."
msgstr "Rotation done."

#: FlatCAMApp.py:7782
msgid "Rotation movement was not executed."
msgstr "Rotation movement was not executed."

#: FlatCAMApp.py:7794
msgid "No object selected to Skew/Shear on X axis."
msgstr "No object selected to Skew/Shear on X axis."

#: FlatCAMApp.py:7816
msgid "Skew on X axis done."
msgstr "Skew on X axis done."

#: FlatCAMApp.py:7827
msgid "No object selected to Skew/Shear on Y axis."
msgstr "No object selected to Skew/Shear on Y axis."

#: FlatCAMApp.py:7849
msgid "Skew on Y axis done."
msgstr "Skew on Y axis done."

#: FlatCAMApp.py:7978 FlatCAMApp.py:8025 flatcamGUI/FlatCAMGUI.py:424
#: flatcamGUI/FlatCAMGUI.py:1431
msgid "Select All"
msgstr "Select All"

#: FlatCAMApp.py:7982 FlatCAMApp.py:8029 flatcamGUI/FlatCAMGUI.py:427
#| msgid "Select All"
msgid "Deselect All"
msgstr "Deselect All"

#: FlatCAMApp.py:8045
#| msgid "No object selected."
msgid "All objects are selected."
msgstr "All objects are selected."

#: FlatCAMApp.py:8053
#| msgid "Object(s) not selected"
msgid "Objects selection is cleared."
msgstr "Objects selection is cleared."

#: FlatCAMApp.py:8067 flatcamGUI/FlatCAMGUI.py:1427
msgid "Grid On/Off"
msgstr "Grid On/Off"

#: FlatCAMApp.py:8080 flatcamEditors/FlatCAMGeoEditor.py:944
#: flatcamEditors/FlatCAMGrbEditor.py:2495
#: flatcamEditors/FlatCAMGrbEditor.py:5266 flatcamGUI/ObjectUI.py:1202
#: flatcamTools/ToolDblSided.py:168 flatcamTools/ToolDblSided.py:215
#: flatcamTools/ToolNonCopperClear.py:258 flatcamTools/ToolPaint.py:188
#: flatcamTools/ToolSolderPaste.py:114 flatcamTools/ToolSolderPaste.py:501
#: flatcamTools/ToolTransform.py:309
msgid "Add"
msgstr "Add"

#: FlatCAMApp.py:8081 FlatCAMObj.py:3782
#: flatcamEditors/FlatCAMGrbEditor.py:2500
#: flatcamEditors/FlatCAMGrbEditor.py:2643 flatcamGUI/FlatCAMGUI.py:606
#: flatcamGUI/FlatCAMGUI.py:841 flatcamGUI/FlatCAMGUI.py:1826
#: flatcamGUI/FlatCAMGUI.py:1922 flatcamGUI/FlatCAMGUI.py:2252
#: flatcamGUI/ObjectUI.py:1218 flatcamTools/ToolNonCopperClear.py:270
#: flatcamTools/ToolPaint.py:200 flatcamTools/ToolSolderPaste.py:120
#: flatcamTools/ToolSolderPaste.py:503
msgid "Delete"
msgstr "Delete"

#: FlatCAMApp.py:8094
msgid "New Grid ..."
msgstr "New Grid ..."

#: FlatCAMApp.py:8095
msgid "Enter a Grid Value:"
msgstr "Enter a Grid Value:"

#: FlatCAMApp.py:8103 FlatCAMApp.py:8130
msgid "Please enter a grid value with non-zero value, in Float format."
msgstr "Please enter a grid value with non-zero value, in Float format."

#: FlatCAMApp.py:8109
msgid "New Grid added"
msgstr "New Grid added"

#: FlatCAMApp.py:8112
msgid "Grid already exists"
msgstr "Grid already exists"

#: FlatCAMApp.py:8115
msgid "Adding New Grid cancelled"
msgstr "Adding New Grid cancelled"

#: FlatCAMApp.py:8137
msgid " Grid Value does not exist"
msgstr " Grid Value does not exist"

#: FlatCAMApp.py:8140
msgid "Grid Value deleted"
msgstr "Grid Value deleted"

#: FlatCAMApp.py:8143
msgid "Delete Grid value cancelled"
msgstr "Delete Grid value cancelled"

#: FlatCAMApp.py:8149
msgid "Key Shortcut List"
msgstr "Key Shortcut List"

#: FlatCAMApp.py:8183
msgid " No object selected to copy it's name"
msgstr " No object selected to copy it's name"

#: FlatCAMApp.py:8187
msgid "Name copied on clipboard ..."
msgstr "Name copied on clipboard ..."

#: FlatCAMApp.py:8393 flatcamEditors/FlatCAMGrbEditor.py:4232
msgid "Coordinates copied to clipboard."
msgstr "Coordinates copied to clipboard."

#: FlatCAMApp.py:8584 FlatCAMApp.py:8587 FlatCAMApp.py:8590 FlatCAMApp.py:8593
#: ObjectCollection.py:784 ObjectCollection.py:787 ObjectCollection.py:790
#: ObjectCollection.py:793 ObjectCollection.py:796 ObjectCollection.py:799
#, python-brace-format
msgid "[selected]<span style=\"color:{color};\">{name}</span> selected"
msgstr "[selected]<span style=\"color:{color};\">{name}</span> selected"

#: FlatCAMApp.py:8731
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"

#: FlatCAMApp.py:8753
msgid "New Project created"
msgstr "New Project created"

#: FlatCAMApp.py:8878 FlatCAMApp.py:8882 flatcamGUI/FlatCAMGUI.py:691
#: flatcamGUI/FlatCAMGUI.py:2115
msgid "Open Gerber"
msgstr "Open Gerber"

#: FlatCAMApp.py:8889
msgid "Opening Gerber file."
msgstr "Opening Gerber file."

#: FlatCAMApp.py:8895
msgid "Open Gerber cancelled."
msgstr "Open Gerber cancelled."

#: FlatCAMApp.py:8915 FlatCAMApp.py:8919 flatcamGUI/FlatCAMGUI.py:692
#: flatcamGUI/FlatCAMGUI.py:2116
msgid "Open Excellon"
msgstr "Open Excellon"

#: FlatCAMApp.py:8925
msgid "Opening Excellon file."
msgstr "Opening Excellon file."

#: FlatCAMApp.py:8931
msgid " Open Excellon cancelled."
msgstr " Open Excellon cancelled."

#: FlatCAMApp.py:8954 FlatCAMApp.py:8958
msgid "Open G-Code"
msgstr "Open G-Code"

#: FlatCAMApp.py:8965
msgid "Opening G-Code file."
msgstr "Opening G-Code file."

#: FlatCAMApp.py:8971
msgid "Open G-Code cancelled."
msgstr "Open G-Code cancelled."

#: FlatCAMApp.py:8988 FlatCAMApp.py:8991 flatcamGUI/FlatCAMGUI.py:1433
msgid "Open Project"
msgstr "Open Project"

#: FlatCAMApp.py:9000
msgid "Open Project cancelled."
msgstr "Open Project cancelled."

#: FlatCAMApp.py:9019 FlatCAMApp.py:9022
msgid "Open Configuration File"
msgstr "Open Configuration File"

#: FlatCAMApp.py:9027
msgid "Open Config cancelled."
msgstr "Open Config cancelled."

#: FlatCAMApp.py:9043 FlatCAMApp.py:9405
msgid "No object selected."
msgstr "No object selected."

#: FlatCAMApp.py:9044 FlatCAMApp.py:9406
msgid "Please Select a Geometry object to export"
msgstr "Please Select a Geometry object to export"

#: FlatCAMApp.py:9058
msgid "Only Geometry, Gerber and CNCJob objects can be used."
msgstr "Only Geometry, Gerber and CNCJob objects can be used."

#: FlatCAMApp.py:9071 FlatCAMApp.py:9075
msgid "Export SVG"
msgstr "Export SVG"

#: FlatCAMApp.py:9081
msgid " Export SVG cancelled."
msgstr " Export SVG cancelled."

#: FlatCAMApp.py:9102
msgid "Data must be a 3D array with last dimension 3 or 4"
msgstr "Data must be a 3D array with last dimension 3 or 4"

#: FlatCAMApp.py:9108 FlatCAMApp.py:9112
msgid "Export PNG Image"
msgstr "Export PNG Image"

#: FlatCAMApp.py:9117
msgid "Export PNG cancelled."
msgstr "Export PNG cancelled."

#: FlatCAMApp.py:9141
msgid "No object selected. Please select an Gerber object to export."
msgstr "No object selected. Please select an Gerber object to export."

#: FlatCAMApp.py:9147 FlatCAMApp.py:9367
msgid "Failed. Only Gerber objects can be saved as Gerber files..."
msgstr "Failed. Only Gerber objects can be saved as Gerber files..."

#: FlatCAMApp.py:9159
msgid "Save Gerber source file"
msgstr "Save Gerber source file"

#: FlatCAMApp.py:9165
msgid "Save Gerber source file cancelled."
msgstr "Save Gerber source file cancelled."

#: FlatCAMApp.py:9185
msgid "No object selected. Please select an Script object to export."
msgstr "No object selected. Please select an Script object to export."

#: FlatCAMApp.py:9191
msgid "Failed. Only Script objects can be saved as TCL Script files..."
msgstr "Failed. Only Script objects can be saved as TCL Script files..."

#: FlatCAMApp.py:9203
msgid "Save Script source file"
msgstr "Save Script source file"

#: FlatCAMApp.py:9209
msgid "Save Script source file cancelled."
msgstr "Save Script source file cancelled."

#: FlatCAMApp.py:9229
msgid "No object selected. Please select an Document object to export."
msgstr "No object selected. Please select an Document object to export."

#: FlatCAMApp.py:9235
msgid "Failed. Only Document objects can be saved as Document files..."
msgstr "Failed. Only Document objects can be saved as Document files..."

#: FlatCAMApp.py:9247
msgid "Save Document source file"
msgstr "Save Document source file"

#: FlatCAMApp.py:9253
msgid "Save Document source file cancelled."
msgstr "Save Document source file cancelled."

#: FlatCAMApp.py:9273
msgid "No object selected. Please select an Excellon object to export."
msgstr "No object selected. Please select an Excellon object to export."

#: FlatCAMApp.py:9279 FlatCAMApp.py:9323
msgid "Failed. Only Excellon objects can be saved as Excellon files..."
msgstr "Failed. Only Excellon objects can be saved as Excellon files..."

#: FlatCAMApp.py:9287 FlatCAMApp.py:9291
msgid "Save Excellon source file"
msgstr "Save Excellon source file"

#: FlatCAMApp.py:9297
msgid "Saving Excellon source file cancelled."
msgstr "Saving Excellon source file cancelled."

#: FlatCAMApp.py:9317
msgid "No object selected. Please Select an Excellon object to export."
msgstr "No object selected. Please Select an Excellon object to export."

#: FlatCAMApp.py:9331 FlatCAMApp.py:9335
msgid "Export Excellon"
msgstr "Export Excellon"

#: FlatCAMApp.py:9341
msgid "Export Excellon cancelled."
msgstr "Export Excellon cancelled."

#: FlatCAMApp.py:9361
msgid "No object selected. Please Select an Gerber object to export."
msgstr "No object selected. Please Select an Gerber object to export."

#: FlatCAMApp.py:9375 FlatCAMApp.py:9379
msgid "Export Gerber"
msgstr "Export Gerber"

#: FlatCAMApp.py:9385
msgid "Export Gerber cancelled."
msgstr "Export Gerber cancelled."

#: FlatCAMApp.py:9417
msgid "Only Geometry objects can be used."
msgstr "Only Geometry objects can be used."

#: FlatCAMApp.py:9431 FlatCAMApp.py:9435
msgid "Export DXF"
msgstr "Export DXF"

#: FlatCAMApp.py:9442
msgid "Export DXF cancelled."
msgstr "Export DXF cancelled."

#: FlatCAMApp.py:9462 FlatCAMApp.py:9465
msgid "Import SVG"
msgstr "Import SVG"

#: FlatCAMApp.py:9475
msgid "Open SVG cancelled."
msgstr "Open SVG cancelled."

#: FlatCAMApp.py:9494 FlatCAMApp.py:9498
msgid "Import DXF"
msgstr "Import DXF"

#: FlatCAMApp.py:9508
msgid "Open DXF cancelled."
msgstr "Open DXF cancelled."

#: FlatCAMApp.py:9546
msgid "Viewing the source code of the selected object."
msgstr "Viewing the source code of the selected object."

#: FlatCAMApp.py:9547 FlatCAMObj.py:6056
msgid "Loading..."
msgstr "Loading..."

#: FlatCAMApp.py:9554
msgid "Select an Gerber or Excellon file to view it's source file."
msgstr "Select an Gerber or Excellon file to view it's source file."

#: FlatCAMApp.py:9569
msgid "Source Editor"
msgstr "Source Editor"

#: FlatCAMApp.py:9602 FlatCAMApp.py:9609
msgid "There is no selected object for which to see it's source file code."
msgstr "There is no selected object for which to see it's source file code."

#: FlatCAMApp.py:9621
msgid "Failed to load the source code for the selected object"
msgstr "Failed to load the source code for the selected object"

#: FlatCAMApp.py:9660
msgid "New TCL script file created in Code Editor."
msgstr "New TCL script file created in Code Editor."

#: FlatCAMApp.py:9698 FlatCAMApp.py:9700
msgid "Open TCL script"
msgstr "Open TCL script"

#: FlatCAMApp.py:9705
msgid "Open TCL script cancelled."
msgstr "Open TCL script cancelled."

#: FlatCAMApp.py:9729
msgid "Executing FlatCAMScript file."
msgstr "Executing FlatCAMScript file."

#: FlatCAMApp.py:9736 FlatCAMApp.py:9739
msgid "Run TCL script"
msgstr "Run TCL script"

#: FlatCAMApp.py:9749
msgid "Run TCL script cancelled."
msgstr "Run TCL script cancelled."

#: FlatCAMApp.py:9765
msgid "TCL script file opened in Code Editor and executed."
msgstr "TCL script file opened in Code Editor and executed."

#: FlatCAMApp.py:9816 FlatCAMApp.py:9820
msgid "Save Project As ..."
msgstr "Save Project As ..."

#: FlatCAMApp.py:9817
#, python-brace-format
msgid "{l_save}/Project_{date}"
msgstr "{l_save}/Project_{date}"

#: FlatCAMApp.py:9826
msgid "Save Project cancelled."
msgstr "Save Project cancelled."

#: FlatCAMApp.py:9874
msgid "Exporting SVG"
msgstr "Exporting SVG"

#: FlatCAMApp.py:9916 FlatCAMApp.py:10043 FlatCAMApp.py:10186
msgid "SVG file exported to"
msgstr "SVG file exported to"

#: FlatCAMApp.py:9963 FlatCAMApp.py:10105 flatcamTools/ToolPanelize.py:404
msgid "No object Box. Using instead"
msgstr "No object Box. Using instead"

#: FlatCAMApp.py:10046 FlatCAMApp.py:10189
msgid "Generating Film ... Please wait."
msgstr "Generating Film ... Please wait."

#: FlatCAMApp.py:10361
msgid "Excellon file exported to"
msgstr "Excellon file exported to"

#: FlatCAMApp.py:10370
msgid "Exporting Excellon"
msgstr "Exporting Excellon"

#: FlatCAMApp.py:10376 FlatCAMApp.py:10384
msgid "Could not export Excellon file."
msgstr "Could not export Excellon file."

#: FlatCAMApp.py:10500
msgid "Gerber file exported to"
msgstr "Gerber file exported to"

#: FlatCAMApp.py:10508
msgid "Exporting Gerber"
msgstr "Exporting Gerber"

#: FlatCAMApp.py:10514 FlatCAMApp.py:10522
msgid "Could not export Gerber file."
msgstr "Could not export Gerber file."

#: FlatCAMApp.py:10567
msgid "DXF file exported to"
msgstr "DXF file exported to"

#: FlatCAMApp.py:10573
msgid "Exporting DXF"
msgstr "Exporting DXF"

#: FlatCAMApp.py:10579 FlatCAMApp.py:10587
msgid "Could not export DXF file."
msgstr "Could not export DXF file."

#: FlatCAMApp.py:10609 FlatCAMApp.py:10654 FlatCAMApp.py:10698
msgid ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"
msgstr ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"

#: FlatCAMApp.py:10619
msgid "Importing SVG"
msgstr "Importing SVG"

#: FlatCAMApp.py:10631 FlatCAMApp.py:10674 FlatCAMApp.py:10719
#: FlatCAMApp.py:10800 FlatCAMApp.py:10867 FlatCAMApp.py:10930
#: FlatCAMApp.py:10968 flatcamTools/ToolPDF.py:224
msgid "Opened"
msgstr "Opened"

#: FlatCAMApp.py:10663
msgid "Importing DXF"
msgstr "Importing DXF"

#: FlatCAMApp.py:10706
msgid "Importing Image"
msgstr "Importing Image"

#: FlatCAMApp.py:10749
msgid "Failed to open file"
msgstr "Failed to open file"

#: FlatCAMApp.py:10754
msgid "Failed to parse file"
msgstr "Failed to parse file"

#: FlatCAMApp.py:10761 FlatCAMApp.py:10835 FlatCAMObj.py:4762
#: flatcamEditors/FlatCAMGrbEditor.py:4044 flatcamTools/ToolPcbWizard.py:436
msgid "An internal error has occurred. See shell.\n"
msgstr "An internal error has occurred. See shell.\n"

#: FlatCAMApp.py:10771
msgid "Object is not Gerber file or empty. Aborting object creation."
msgstr "Object is not Gerber file or empty. Aborting object creation."

#: FlatCAMApp.py:10779
msgid "Opening Gerber"
msgstr "Opening Gerber"

#: FlatCAMApp.py:10790
msgid " Open Gerber failed. Probable not a Gerber file."
msgstr " Open Gerber failed. Probable not a Gerber file."

#: FlatCAMApp.py:10825 flatcamTools/ToolPcbWizard.py:426
msgid "This is not Excellon file."
msgstr "This is not Excellon file."

#: FlatCAMApp.py:10829
msgid "Cannot open file"
msgstr "Cannot open file"

#: FlatCAMApp.py:10849 flatcamTools/ToolPDF.py:274
#: flatcamTools/ToolPcbWizard.py:450
msgid "No geometry found in file"
msgstr "No geometry found in file"

#: FlatCAMApp.py:10852
msgid "Opening Excellon."
msgstr "Opening Excellon."

#: FlatCAMApp.py:10859
msgid "Open Excellon file failed. Probable not an Excellon file."
msgstr "Open Excellon file failed. Probable not an Excellon file."

#: FlatCAMApp.py:10890
msgid "Reading GCode file"
msgstr "Reading GCode file"

#: FlatCAMApp.py:10897
msgid "Failed to open"
msgstr "Failed to open"

#: FlatCAMApp.py:10905
msgid "This is not GCODE"
msgstr "This is not GCODE"

#: FlatCAMApp.py:10910
msgid "Opening G-Code."
msgstr "Opening G-Code."

#: FlatCAMApp.py:10919
msgid ""
"Failed to create CNCJob Object. Probable not a GCode file. Try to load it "
"from File menu.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"
msgstr ""
"Failed to create CNCJob Object. Probable not a GCode file. Try to load it "
"from File menu.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"

#: FlatCAMApp.py:10944
msgid "Opening TCL Script..."
msgstr "Opening TCL Script..."

#: FlatCAMApp.py:10952
msgid "TCL script file opened in Code Editor."
msgstr "TCL script file opened in Code Editor."

#: FlatCAMApp.py:10955
msgid "Failed to open TCL Script."
msgstr "Failed to open TCL Script."

#: FlatCAMApp.py:10983
msgid "Opening FlatCAM Config file."
msgstr "Opening FlatCAM Config file."

#: FlatCAMApp.py:11005
msgid "Failed to open config file"
msgstr "Failed to open config file"

#: FlatCAMApp.py:11031
msgid "Loading Project ... Please Wait ..."
msgstr "Loading Project ... Please Wait ..."

#: FlatCAMApp.py:11036
msgid "Opening FlatCAM Project file."
msgstr "Opening FlatCAM Project file."

#: FlatCAMApp.py:11046 FlatCAMApp.py:11064
msgid "Failed to open project file"
msgstr "Failed to open project file"

#: FlatCAMApp.py:11098
msgid "Loading Project ... restoring"
msgstr "Loading Project ... restoring"

#: FlatCAMApp.py:11107
msgid "Project loaded from"
msgstr "Project loaded from"

#: FlatCAMApp.py:11170
msgid "Redrawing all objects"
msgstr "Redrawing all objects"

#: FlatCAMApp.py:11202
msgid "Available commands:\n"
msgstr "Available commands:\n"

#: FlatCAMApp.py:11204
msgid ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"
msgstr ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"

#: FlatCAMApp.py:11354
msgid "Shows list of commands."
msgstr "Shows list of commands."

#: FlatCAMApp.py:11416
msgid "Failed to load recent item list."
msgstr "Failed to load recent item list."

#: FlatCAMApp.py:11424
msgid "Failed to parse recent item list."
msgstr "Failed to parse recent item list."

#: FlatCAMApp.py:11435
msgid "Failed to load recent projects item list."
msgstr "Failed to load recent projects item list."

#: FlatCAMApp.py:11443
msgid "Failed to parse recent project item list."
msgstr "Failed to parse recent project item list."

#: FlatCAMApp.py:11502
msgid "Clear Recent projects"
msgstr "Clear Recent projects"

#: FlatCAMApp.py:11525
msgid "Clear Recent files"
msgstr "Clear Recent files"

#: FlatCAMApp.py:11542 flatcamGUI/FlatCAMGUI.py:1114
msgid "<b>Shortcut Key List</b>"
msgstr "<b>Shortcut Key List</b>"

#: FlatCAMApp.py:11616
msgid "Selected Tab - Choose an Item from Project Tab"
msgstr "Selected Tab - Choose an Item from Project Tab"

#: FlatCAMApp.py:11617
msgid "Details"
msgstr "Details"

#: FlatCAMApp.py:11619
msgid "The normal flow when working in FlatCAM is the following:"
msgstr "The normal flow when working in FlatCAM is the following:"

#: FlatCAMApp.py:11620
msgid ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
"FlatCAM using either the toolbars, key shortcuts or even dragging and "
"dropping the files on the GUI."
msgstr ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
"FlatCAM using either the toolbars, key shortcuts or even dragging and "
"dropping the files on the GUI."

#: FlatCAMApp.py:11623
msgid ""
"You can also load a FlatCAM project by double clicking on the project file, "
"drag and drop of the file into the FLATCAM GUI or through the menu (or "
"toolbar) actions offered within the app."
msgstr ""
"You can also load a FlatCAM project by double clicking on the project file, "
"drag and drop of the file into the FLATCAM GUI or through the menu (or "
"toolbar) actions offered within the app."

#: FlatCAMApp.py:11626
msgid ""
"Once an object is available in the Project Tab, by selecting it and then "
"focusing on SELECTED TAB (more simpler is to double click the object name in "
"the Project Tab, SELECTED TAB will be updated with the object properties "
"according to its kind: Gerber, Excellon, Geometry or CNCJob object."
msgstr ""
"Once an object is available in the Project Tab, by selecting it and then "
"focusing on SELECTED TAB (more simpler is to double click the object name in "
"the Project Tab, SELECTED TAB will be updated with the object properties "
"according to its kind: Gerber, Excellon, Geometry or CNCJob object."

#: FlatCAMApp.py:11630
msgid ""
"If the selection of the object is done on the canvas by single click "
"instead, and the SELECTED TAB is in focus, again the object properties will "
"be displayed into the Selected Tab. Alternatively, double clicking on the "
"object on the canvas will bring the SELECTED TAB and populate it even if it "
"was out of focus."
msgstr ""
"If the selection of the object is done on the canvas by single click "
"instead, and the SELECTED TAB is in focus, again the object properties will "
"be displayed into the Selected Tab. Alternatively, double clicking on the "
"object on the canvas will bring the SELECTED TAB and populate it even if it "
"was out of focus."

#: FlatCAMApp.py:11634
msgid ""
"You can change the parameters in this screen and the flow direction is like "
"this:"
msgstr ""
"You can change the parameters in this screen and the flow direction is like "
"this:"

#: FlatCAMApp.py:11635
msgid ""
"Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> "
"Geometry Object --> Add tools (change param in Selected Tab) --> Generate "
"CNCJob --> CNCJob Object --> Verify GCode (through Edit CNC Code) and/or "
"append/prepend to GCode (again, done in SELECTED TAB) --> Save GCode."
msgstr ""
"Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> "
"Geometry Object --> Add tools (change param in Selected Tab) --> Generate "
"CNCJob --> CNCJob Object --> Verify GCode (through Edit CNC Code) and/or "
"append/prepend to GCode (again, done in SELECTED TAB) --> Save GCode."

#: FlatCAMApp.py:11639
msgid ""
"A list of key shortcuts is available through an menu entry in Help --> "
"Shortcuts List or through its own key shortcut: <b>F3</b>."
msgstr ""
"A list of key shortcuts is available through an menu entry in Help --> "
"Shortcuts List or through its own key shortcut: <b>F3</b>."

#: FlatCAMApp.py:11700
msgid "Failed checking for latest version. Could not connect."
msgstr "Failed checking for latest version. Could not connect."

#: FlatCAMApp.py:11708
msgid "Could not parse information about latest version."
msgstr "Could not parse information about latest version."

#: FlatCAMApp.py:11719
msgid "FlatCAM is up to date!"
msgstr "FlatCAM is up to date!"

#: FlatCAMApp.py:11724
msgid "Newer Version Available"
msgstr "Newer Version Available"

#: FlatCAMApp.py:11725
msgid ""
"There is a newer version of FlatCAM available for download:\n"
"\n"
msgstr ""
"There is a newer version of FlatCAM available for download:\n"
"\n"

#: FlatCAMApp.py:11727
msgid "info"
msgstr "info"

#: FlatCAMApp.py:11806
msgid "All plots disabled."
msgstr "All plots disabled."

#: FlatCAMApp.py:11813
msgid "All non selected plots disabled."
msgstr "All non selected plots disabled."

#: FlatCAMApp.py:11820
msgid "All plots enabled."
msgstr "All plots enabled."

#: FlatCAMApp.py:11827
msgid "Selected plots enabled..."
msgstr "Selected plots enabled..."

#: FlatCAMApp.py:11836
msgid "Selected plots disabled..."
msgstr "Selected plots disabled..."

#: FlatCAMApp.py:11854
msgid "Enabling plots ..."
msgstr "Enabling plots ..."

#: FlatCAMApp.py:11893
msgid "Disabling plots ..."
msgstr "Disabling plots ..."

#: FlatCAMApp.py:11915
msgid "Working ..."
msgstr "Working ..."

#: FlatCAMApp.py:11954
msgid "Saving FlatCAM Project"
msgstr "Saving FlatCAM Project"

#: FlatCAMApp.py:11976 FlatCAMApp.py:12014
msgid "Project saved to"
msgstr "Project saved to"

#: FlatCAMApp.py:11996
msgid "Failed to verify project file"
msgstr "Failed to verify project file"

#: FlatCAMApp.py:11996 FlatCAMApp.py:12005 FlatCAMApp.py:12017
msgid "Retry to save it."
msgstr "Retry to save it."

#: FlatCAMApp.py:12005 FlatCAMApp.py:12017
msgid "Failed to parse saved project file"
msgstr "Failed to parse saved project file"

#: FlatCAMApp.py:12238
msgid "The user requested a graceful exit of the current task."
msgstr "The user requested a graceful exit of the current task."

#: FlatCAMObj.py:251
msgid "Name changed from"
msgstr "Name changed from"

#: FlatCAMObj.py:251
msgid "to"
msgstr "to"

#: FlatCAMObj.py:262
msgid "Offsetting..."
msgstr "Offsetting..."

#: FlatCAMObj.py:277
msgid "Scaling..."
msgstr "Scaling..."

#: FlatCAMObj.py:293
msgid "Skewing..."
msgstr "Skewing..."

#: FlatCAMObj.py:663 FlatCAMObj.py:2491 FlatCAMObj.py:3786
#: flatcamGUI/PreferencesUI.py:990 flatcamGUI/PreferencesUI.py:2069
msgid "Basic"
msgstr "Basic"

#: FlatCAMObj.py:685 FlatCAMObj.py:2503 FlatCAMObj.py:3806
#: flatcamGUI/PreferencesUI.py:991
msgid "Advanced"
msgstr "Advanced"

#: FlatCAMObj.py:901
msgid "Buffering solid geometry"
msgstr "Buffering solid geometry"

#: FlatCAMObj.py:904 camlib.py:982 flatcamGUI/PreferencesUI.py:1516
#: flatcamTools/ToolNonCopperClear.py:1602
#: flatcamTools/ToolNonCopperClear.py:1700
#: flatcamTools/ToolNonCopperClear.py:1712
#: flatcamTools/ToolNonCopperClear.py:1950
#: flatcamTools/ToolNonCopperClear.py:2046
#: flatcamTools/ToolNonCopperClear.py:2058
msgid "Buffering"
msgstr "Buffering"

#: FlatCAMObj.py:910
msgid "Done"
msgstr "Done"

#: FlatCAMObj.py:951 FlatCAMObj.py:967 FlatCAMObj.py:984
msgid "Isolating..."
msgstr "Isolating..."

#: FlatCAMObj.py:1188 FlatCAMObj.py:1316
#: flatcamTools/ToolNonCopperClear.py:1631
#: flatcamTools/ToolNonCopperClear.py:1974
msgid "Isolation geometry could not be generated."
msgstr "Isolation geometry could not be generated."

#: FlatCAMObj.py:1237 FlatCAMObj.py:3469 FlatCAMObj.py:3744 FlatCAMObj.py:4020
msgid "Rough"
msgstr "Rough"

#: FlatCAMObj.py:1262 FlatCAMObj.py:1339
msgid "Isolation geometry created"
msgstr "Isolation geometry created"

#: FlatCAMObj.py:1271 FlatCAMObj.py:1346
msgid "Subtracting Geo"
msgstr "Subtracting Geo"

#: FlatCAMObj.py:1564
msgid "Plotting Apertures"
msgstr "Plotting Apertures"

#: FlatCAMObj.py:2318 flatcamEditors/FlatCAMExcEditor.py:2323
msgid "Total Drills"
msgstr "Total Drills"

#: FlatCAMObj.py:2350 flatcamEditors/FlatCAMExcEditor.py:2355
msgid "Total Slots"
msgstr "Total Slots"

#: FlatCAMObj.py:2557 FlatCAMObj.py:3856 FlatCAMObj.py:4154 FlatCAMObj.py:4345
#: FlatCAMObj.py:4356 FlatCAMObj.py:4474 FlatCAMObj.py:4696 FlatCAMObj.py:4819
#: FlatCAMObj.py:4982 FlatCAMObj.py:5501
#: flatcamEditors/FlatCAMExcEditor.py:2430
#: flatcamEditors/FlatCAMGeoEditor.py:1083
#: flatcamEditors/FlatCAMGeoEditor.py:1117
#: flatcamEditors/FlatCAMGeoEditor.py:1138
#: flatcamEditors/FlatCAMGeoEditor.py:1159
#: flatcamEditors/FlatCAMGeoEditor.py:1196
#: flatcamEditors/FlatCAMGeoEditor.py:1224
#: flatcamEditors/FlatCAMGeoEditor.py:1245
#: flatcamEditors/FlatCAMGrbEditor.py:5415
#: flatcamEditors/FlatCAMGrbEditor.py:5458
#: flatcamEditors/FlatCAMGrbEditor.py:5485
#: flatcamEditors/FlatCAMGrbEditor.py:5512
#: flatcamEditors/FlatCAMGrbEditor.py:5553
#: flatcamEditors/FlatCAMGrbEditor.py:5591
#: flatcamEditors/FlatCAMGrbEditor.py:5617
#: flatcamTools/ToolNonCopperClear.py:956
#: flatcamTools/ToolNonCopperClear.py:1032
#: flatcamTools/ToolNonCopperClear.py:1438 flatcamTools/ToolPaint.py:810
#: flatcamTools/ToolPaint.py:1003 flatcamTools/ToolPaint.py:1289
#: flatcamTools/ToolPaint.py:1566 flatcamTools/ToolPaint.py:2043
#: flatcamTools/ToolSolderPaste.py:789 flatcamTools/ToolSolderPaste.py:864
msgid "Wrong value format entered, use a number."
msgstr "Wrong value format entered, use a number."

#: FlatCAMObj.py:2811 FlatCAMObj.py:2906 FlatCAMObj.py:3027
msgid "Please select one or more tools from the list and try again."
msgstr "Please select one or more tools from the list and try again."

#: FlatCAMObj.py:2818
msgid "Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr "Milling tool for DRILLS is larger than hole size. Cancelled."

#: FlatCAMObj.py:2819 flatcamEditors/FlatCAMGeoEditor.py:406
#: flatcamGUI/FlatCAMGUI.py:919
msgid "Tool"
msgstr "Tool"

#: FlatCAMObj.py:2835 FlatCAMObj.py:2928 FlatCAMObj.py:3046
msgid "Tool_nr"
msgstr "Tool_nr"

#: FlatCAMObj.py:2835 FlatCAMObj.py:2928 FlatCAMObj.py:3046
#: flatcamEditors/FlatCAMExcEditor.py:1504
#: flatcamEditors/FlatCAMExcEditor.py:2938 flatcamGUI/ObjectUI.py:706
#: flatcamTools/ToolNonCopperClear.py:120 flatcamTools/ToolPaint.py:123
#: flatcamTools/ToolPcbWizard.py:75 flatcamTools/ToolSolderPaste.py:80
msgid "Diameter"
msgstr "Diameter"

#: FlatCAMObj.py:2835 FlatCAMObj.py:2928 FlatCAMObj.py:3046
msgid "Drills_Nr"
msgstr "Drills_Nr"

#: FlatCAMObj.py:2835 FlatCAMObj.py:2928 FlatCAMObj.py:3046
msgid "Slots_Nr"
msgstr "Slots_Nr"

#: FlatCAMObj.py:2915
msgid "Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr "Milling tool for SLOTS is larger than hole size. Cancelled."

#: FlatCAMObj.py:3087 FlatCAMObj.py:5195
msgid ""
"Wrong value format for self.defaults[\"z_pdepth\"] or self.options[\"z_pdepth"
"\"]"
msgstr ""
"Wrong value format for self.defaults[\"z_pdepth\"] or self.options[\"z_pdepth"
"\"]"

#: FlatCAMObj.py:3098 FlatCAMObj.py:5206
msgid ""
"Wrong value format for self.defaults[\"feedrate_probe\"] or self."
"options[\"feedrate_probe\"]"
msgstr ""
"Wrong value format for self.defaults[\"feedrate_probe\"] or self."
"options[\"feedrate_probe\"]"

#: FlatCAMObj.py:3128 FlatCAMObj.py:5081 FlatCAMObj.py:5087 FlatCAMObj.py:5241
msgid "Generating CNC Code"
msgstr "Generating CNC Code"

#: FlatCAMObj.py:3154 camlib.py:2399 camlib.py:3383
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "

#: FlatCAMObj.py:3469 FlatCAMObj.py:4396 FlatCAMObj.py:4397 FlatCAMObj.py:4406
msgid "Iso"
msgstr "Iso"

#: FlatCAMObj.py:3469
msgid "Finish"
msgstr "Finish"

#: FlatCAMObj.py:3780 flatcamGUI/FlatCAMGUI.py:605 flatcamGUI/FlatCAMGUI.py:710
#: flatcamGUI/FlatCAMGUI.py:839 flatcamGUI/FlatCAMGUI.py:1823
#: flatcamGUI/FlatCAMGUI.py:1921 flatcamGUI/FlatCAMGUI.py:2132
#: flatcamGUI/FlatCAMGUI.py:2250 flatcamGUI/ObjectUI.py:1210
#: flatcamTools/ToolPanelize.py:517 flatcamTools/ToolPanelize.py:544
#: flatcamTools/ToolPanelize.py:643 flatcamTools/ToolPanelize.py:677
#: flatcamTools/ToolPanelize.py:742
msgid "Copy"
msgstr "Copy"

#: FlatCAMObj.py:3994
msgid "Please enter the desired tool diameter in Float format."
msgstr "Please enter the desired tool diameter in Float format."

#: FlatCAMObj.py:4065
msgid "Tool added in Tool Table."
msgstr "Tool added in Tool Table."

#: FlatCAMObj.py:4069
msgid "Default Tool added. Wrong value format entered."
msgstr "Default Tool added. Wrong value format entered."

#: FlatCAMObj.py:4102 FlatCAMObj.py:4111
msgid "Failed. Select a tool to copy."
msgstr "Failed. Select a tool to copy."

#: FlatCAMObj.py:4139
msgid "Tool was copied in Tool Table."
msgstr "Tool was copied in Tool Table."

#: FlatCAMObj.py:4169
msgid "Tool was edited in Tool Table."
msgstr "Tool was edited in Tool Table."

#: FlatCAMObj.py:4198 FlatCAMObj.py:4207
msgid "Failed. Select a tool to delete."
msgstr "Failed. Select a tool to delete."

#: FlatCAMObj.py:4230
msgid "Tool was deleted in Tool Table."
msgstr "Tool was deleted in Tool Table."

#: FlatCAMObj.py:4676
msgid "This Geometry can't be processed because it is"
msgstr "This Geometry can't be processed because it is"

#: FlatCAMObj.py:4678
msgid "geometry"
msgstr "geometry"

#: FlatCAMObj.py:4721
msgid "Failed. No tool selected in the tool table ..."
msgstr "Failed. No tool selected in the tool table ..."

#: FlatCAMObj.py:4824 FlatCAMObj.py:4988
msgid ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."

#: FlatCAMObj.py:4889 FlatCAMObj.py:5048
msgid "G-Code parsing in progress..."
msgstr "G-Code parsing in progress..."

#: FlatCAMObj.py:4891 FlatCAMObj.py:5050
msgid "G-Code parsing finished..."
msgstr "G-Code parsing finished..."

#: FlatCAMObj.py:4899
msgid "Finished G-Code processing"
msgstr "Finished G-Code processing"

#: FlatCAMObj.py:4901 FlatCAMObj.py:5062
msgid "G-Code processing failed with error"
msgstr "G-Code processing failed with error"

#: FlatCAMObj.py:4949 flatcamTools/ToolSolderPaste.py:1212
msgid "Cancelled. Empty file, it has no geometry"
msgstr "Cancelled. Empty file, it has no geometry"

#: FlatCAMObj.py:5060 FlatCAMObj.py:5234
msgid "Finished G-Code processing..."
msgstr "Finished G-Code processing..."

#: FlatCAMObj.py:5084 FlatCAMObj.py:5090 FlatCAMObj.py:5244
msgid "CNCjob created"
msgstr "CNCjob created"

#: FlatCAMObj.py:5276 FlatCAMObj.py:5286 flatcamParsers/ParseGerber.py:1666
#: flatcamParsers/ParseGerber.py:1676
msgid "Scale factor has to be a number: integer or float."
msgstr "Scale factor has to be a number: integer or float."

#: FlatCAMObj.py:5360
msgid "Geometry Scale done."
msgstr "Geometry Scale done."

#: FlatCAMObj.py:5377 flatcamParsers/ParseGerber.py:1791
msgid ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."
msgstr ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."

#: FlatCAMObj.py:5431
msgid "Geometry Offset done."
msgstr "Geometry Offset done."

#: FlatCAMObj.py:5460
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."

#: FlatCAMObj.py:5951 FlatCAMObj.py:6574 FlatCAMObj.py:6758
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr "<span style=\"color:green;\"><b>Basic</b></span>"

#: FlatCAMObj.py:5957 FlatCAMObj.py:6578 FlatCAMObj.py:6762
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr "<span style=\"color:red;\"><b>Advanced</b></span>"

#: FlatCAMObj.py:6000
msgid "Plotting..."
msgstr "Plotting..."

#: FlatCAMObj.py:6024 FlatCAMObj.py:6029 flatcamTools/ToolSolderPaste.py:1418
msgid "Export Machine Code ..."
msgstr "Export Machine Code ..."

#: FlatCAMObj.py:6035 flatcamTools/ToolSolderPaste.py:1422
msgid "Export Machine Code cancelled ..."
msgstr "Export Machine Code cancelled ..."

#: FlatCAMObj.py:6053
msgid "Machine Code file saved to"
msgstr "Machine Code file saved to"

#: FlatCAMObj.py:6108
msgid "Loaded Machine Code into Code Editor"
msgstr "Loaded Machine Code into Code Editor"

#: FlatCAMObj.py:6223
msgid "This CNCJob object can't be processed because it is a"
msgstr "This CNCJob object can't be processed because it is a"

#: FlatCAMObj.py:6225
msgid "CNCJob object"
msgstr "CNCJob object"

#: FlatCAMObj.py:6277
msgid "G-code does not have a units code: either G20 or G21"
msgstr "G-code does not have a units code: either G20 or G21"

#: FlatCAMObj.py:6289
msgid "Cancelled. The Toolchange Custom code is enabled but it's empty."
msgstr "Cancelled. The Toolchange Custom code is enabled but it's empty."

#: FlatCAMObj.py:6295
msgid "Toolchange G-code was replaced by a custom code."
msgstr "Toolchange G-code was replaced by a custom code."

#: FlatCAMObj.py:6308 flatcamEditors/FlatCAMTextEditor.py:213
#: flatcamTools/ToolSolderPaste.py:1449
msgid "No such file or directory"
msgstr "No such file or directory"

#: FlatCAMObj.py:6322 flatcamEditors/FlatCAMTextEditor.py:225
msgid "Saved to"
msgstr "Saved to"

#: FlatCAMObj.py:6332 FlatCAMObj.py:6342
msgid ""
"The used postprocessor file has to have in it's name: 'toolchange_custom'"
msgstr ""
"The used postprocessor file has to have in it's name: 'toolchange_custom'"

#: FlatCAMObj.py:6346
msgid "There is no postprocessor file."
msgstr "There is no postprocessor file."

#: FlatCAMObj.py:6623
msgid "Script Editor"
msgstr "Script Editor"

#: FlatCAMObj.py:6862
msgid "Document Editor"
msgstr "Document Editor"

#: FlatCAMProcess.py:172
msgid "processes running."
msgstr "processes running."

#: FlatCAMTranslation.py:92
msgid "The application will restart."
msgstr "The application will restart."

#: FlatCAMTranslation.py:94
msgid "Are you sure do you want to change the current language to"
msgstr "Are you sure do you want to change the current language to"

#: FlatCAMTranslation.py:95
msgid "Apply Language ..."
msgstr "Apply Language ..."

#: ObjectCollection.py:450
#, python-brace-format
msgid "Object renamed from <b>{old}</b> to <b>{new}</b>"
msgstr "Object renamed from <b>{old}</b> to <b>{new}</b>"

#: ObjectCollection.py:830
msgid "Cause of error"
msgstr "Cause of error"

#: camlib.py:593
msgid "self.solid_geometry is neither BaseGeometry or list."
msgstr "self.solid_geometry is neither BaseGeometry or list."

#: camlib.py:972
msgid "Pass"
msgstr "Pass"

#: camlib.py:992
msgid "Get Exteriors"
msgstr "Get Exteriors"

#: camlib.py:995
msgid "Get Interiors"
msgstr "Get Interiors"

#: camlib.py:1961
msgid "Object was mirrored"
msgstr "Object was mirrored"

#: camlib.py:1964
msgid "Failed to mirror. No object selected"
msgstr "Failed to mirror. No object selected"

#: camlib.py:2033
msgid "Object was rotated"
msgstr "Object was rotated"

#: camlib.py:2036
msgid "Failed to rotate. No object selected"
msgstr "Failed to rotate. No object selected"

#: camlib.py:2104
msgid "Object was skewed"
msgstr "Object was skewed"

#: camlib.py:2107
msgid "Failed to skew. No object selected"
msgstr "Failed to skew. No object selected"

#: camlib.py:2304
msgid "There is no such parameter"
msgstr "There is no such parameter"

#: camlib.py:2376
msgid ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."
msgstr ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."

#: camlib.py:2384 camlib.py:3059 camlib.py:3409
msgid "The Cut Z parameter is zero. There will be no cut, skipping file"
msgstr "The Cut Z parameter is zero. There will be no cut, skipping file"

#: camlib.py:2436
msgid "Creating a list of points to drill..."
msgstr "Creating a list of points to drill..."

#: camlib.py:2519
msgid "Starting G-Code"
msgstr "Starting G-Code"

#: camlib.py:2617 camlib.py:2764 camlib.py:2869 camlib.py:3175 camlib.py:3523
msgid "Starting G-Code for tool with diameter"
msgstr "Starting G-Code for tool with diameter"

#: camlib.py:2674 camlib.py:2821 camlib.py:2927
msgid "G91 coordinates not implemented"
msgstr "G91 coordinates not implemented"

#: camlib.py:2680 camlib.py:2827 camlib.py:2933
msgid "The loaded Excellon file has no drills"
msgstr "The loaded Excellon file has no drills"

#: camlib.py:2955
msgid "Finished G-Code generation..."
msgstr "Finished G-Code generation..."

#: camlib.py:3032
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."

#: camlib.py:3045 camlib.py:3395
msgid ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."
msgstr ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."

#: camlib.py:3051 camlib.py:3401
msgid ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:3069 camlib.py:3415
msgid "Travel Z parameter is None or zero."
msgstr "Travel Z parameter is None or zero."

#: camlib.py:3074 camlib.py:3420
msgid ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:3082 camlib.py:3428
msgid "The Z Travel parameter is zero. This is dangerous, skipping file"
msgstr "The Z Travel parameter is zero. This is dangerous, skipping file"

#: camlib.py:3097 camlib.py:3447
msgid "Indexing geometry before generating G-Code..."
msgstr "Indexing geometry before generating G-Code..."

#: camlib.py:3158 camlib.py:3509
msgid "Starting G-Code..."
msgstr "Starting G-Code..."

#: camlib.py:3245 camlib.py:3593
msgid "Finished G-Code generation"
msgstr "Finished G-Code generation"

#: camlib.py:3247
msgid "paths traced"
msgstr "paths traced"

#: camlib.py:3283
msgid "Expected a Geometry, got"
msgstr "Expected a Geometry, got"

#: camlib.py:3290
msgid ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."
msgstr ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."

#: camlib.py:3330
msgid ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."

#: camlib.py:3595
msgid " paths traced."
msgstr " paths traced."

#: camlib.py:3624
msgid "There is no tool data in the SolderPaste geometry."
msgstr "There is no tool data in the SolderPaste geometry."

#: camlib.py:3711
msgid "Finished SolderPste G-Code generation"
msgstr "Finished SolderPste G-Code generation"

#: camlib.py:3713
msgid "paths traced."
msgstr "paths traced."

#: camlib.py:3967
msgid "Parsing GCode file. Number of lines"
msgstr "Parsing GCode file. Number of lines"

#: camlib.py:4057
msgid "Creating Geometry from the parsed GCode file. "
msgstr "Creating Geometry from the parsed GCode file. "

#: camlib.py:4189 camlib.py:4473 camlib.py:4576 camlib.py:4623
msgid "G91 coordinates not implemented ..."
msgstr "G91 coordinates not implemented ..."

#: camlib.py:4320
msgid "Unifying Geometry from parsed Geometry segments"
msgstr "Unifying Geometry from parsed Geometry segments"

#: flatcamEditors/FlatCAMExcEditor.py:51 flatcamEditors/FlatCAMExcEditor.py:76
#: flatcamEditors/FlatCAMExcEditor.py:158
#: flatcamEditors/FlatCAMExcEditor.py:362
#: flatcamEditors/FlatCAMExcEditor.py:554
#: flatcamEditors/FlatCAMGrbEditor.py:239
#: flatcamEditors/FlatCAMGrbEditor.py:244
msgid "Click to place ..."
msgstr "Click to place ..."

#: flatcamEditors/FlatCAMExcEditor.py:60
msgid "To add a drill first select a tool"
msgstr "To add a drill first select a tool"

#: flatcamEditors/FlatCAMExcEditor.py:123
msgid "Done. Drill added."
msgstr "Done. Drill added."

#: flatcamEditors/FlatCAMExcEditor.py:166
msgid "To add an Drill Array first select a tool in Tool Table"
msgstr "To add an Drill Array first select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:182
#: flatcamEditors/FlatCAMExcEditor.py:392
#: flatcamEditors/FlatCAMExcEditor.py:601
#: flatcamEditors/FlatCAMExcEditor.py:1102
#: flatcamEditors/FlatCAMExcEditor.py:1127
#: flatcamEditors/FlatCAMGrbEditor.py:463
#: flatcamEditors/FlatCAMGrbEditor.py:1878
#: flatcamEditors/FlatCAMGrbEditor.py:1906
msgid "Click on target location ..."
msgstr "Click on target location ..."

#: flatcamEditors/FlatCAMExcEditor.py:199
msgid "Click on the Drill Circular Array Start position"
msgstr "Click on the Drill Circular Array Start position"

#: flatcamEditors/FlatCAMExcEditor.py:221
#: flatcamEditors/FlatCAMExcEditor.py:640
#: flatcamEditors/FlatCAMGrbEditor.py:506
msgid "The value is not Float. Check for comma instead of dot separator."
msgstr "The value is not Float. Check for comma instead of dot separator."

#: flatcamEditors/FlatCAMExcEditor.py:225
msgid "The value is mistyped. Check the value"
msgstr "The value is mistyped. Check the value"

#: flatcamEditors/FlatCAMExcEditor.py:324
msgid "Too many drills for the selected spacing angle."
msgstr "Too many drills for the selected spacing angle."

#: flatcamEditors/FlatCAMExcEditor.py:342
msgid "Done. Drill Array added."
msgstr "Done. Drill Array added."

#: flatcamEditors/FlatCAMExcEditor.py:371
msgid "To add a slot first select a tool"
msgstr "To add a slot first select a tool"

#: flatcamEditors/FlatCAMExcEditor.py:429
#: flatcamEditors/FlatCAMExcEditor.py:436
#: flatcamEditors/FlatCAMExcEditor.py:706
#: flatcamEditors/FlatCAMExcEditor.py:713
msgid "Value is missing or wrong format. Add it and retry."
msgstr "Value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMExcEditor.py:535
msgid "Done. Adding Slot completed."
msgstr "Done. Adding Slot completed."

#: flatcamEditors/FlatCAMExcEditor.py:562
msgid "To add an Slot Array first select a tool in Tool Table"
msgstr "To add an Slot Array first select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:618
msgid "Click on the Slot Circular Array Start position"
msgstr "Click on the Slot Circular Array Start position"

#: flatcamEditors/FlatCAMExcEditor.py:644
#: flatcamEditors/FlatCAMGrbEditor.py:510
msgid "The value is mistyped. Check the value."
msgstr "The value is mistyped. Check the value."

#: flatcamEditors/FlatCAMExcEditor.py:823
msgid "Too many Slots for the selected spacing angle."
msgstr "Too many Slots for the selected spacing angle."

#: flatcamEditors/FlatCAMExcEditor.py:846
msgid "Done. Slot Array added."
msgstr "Done. Slot Array added."

#: flatcamEditors/FlatCAMExcEditor.py:863
msgid "Click on the Drill(s) to resize ..."
msgstr "Click on the Drill(s) to resize ..."

#: flatcamEditors/FlatCAMExcEditor.py:893
msgid "Resize drill(s) failed. Please enter a diameter for resize."
msgstr "Resize drill(s) failed. Please enter a diameter for resize."

#: flatcamEditors/FlatCAMExcEditor.py:983
#: flatcamEditors/FlatCAMExcEditor.py:1052 flatcamGUI/FlatCAMGUI.py:2790
#: flatcamGUI/FlatCAMGUI.py:3001 flatcamGUI/FlatCAMGUI.py:3218
msgid "Cancelled."
msgstr "Cancelled."

#: flatcamEditors/FlatCAMExcEditor.py:1073
msgid "Done. Drill/Slot Resize completed."
msgstr "Done. Drill/Slot Resize completed."

#: flatcamEditors/FlatCAMExcEditor.py:1076
msgid "Cancelled. No drills/slots selected for resize ..."
msgstr "Cancelled. No drills/slots selected for resize ..."

#: flatcamEditors/FlatCAMExcEditor.py:1104
#: flatcamEditors/FlatCAMGrbEditor.py:1880
msgid "Click on reference location ..."
msgstr "Click on reference location ..."

#: flatcamEditors/FlatCAMExcEditor.py:1160
msgid "Done. Drill(s) Move completed."
msgstr "Done. Drill(s) Move completed."

#: flatcamEditors/FlatCAMExcEditor.py:1258
msgid "Done. Drill(s) copied."
msgstr "Done. Drill(s) copied."

#: flatcamEditors/FlatCAMExcEditor.py:1477 flatcamGUI/PreferencesUI.py:2610
msgid "Excellon Editor"
msgstr "Excellon Editor"

#: flatcamEditors/FlatCAMExcEditor.py:1484
#: flatcamEditors/FlatCAMGrbEditor.py:2381
msgid "Name:"
msgstr "Name:"

#: flatcamEditors/FlatCAMExcEditor.py:1490 flatcamGUI/ObjectUI.py:686
#: flatcamGUI/ObjectUI.py:1064 flatcamTools/ToolNonCopperClear.py:109
#: flatcamTools/ToolPaint.py:112 flatcamTools/ToolSolderPaste.py:69
msgid "Tools Table"
msgstr "Tools Table"

#: flatcamEditors/FlatCAMExcEditor.py:1492 flatcamGUI/ObjectUI.py:688
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""
"Tools in this Excellon object\n"
"when are used for drilling."

#: flatcamEditors/FlatCAMExcEditor.py:1512
msgid "Add/Delete Tool"
msgstr "Add/Delete Tool"

#: flatcamEditors/FlatCAMExcEditor.py:1514
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."

#: flatcamEditors/FlatCAMExcEditor.py:1522 flatcamGUI/ObjectUI.py:1185
#: flatcamTools/ToolNonCopperClear.py:225 flatcamTools/ToolPaint.py:176
msgid "Tool Dia"
msgstr "Tool Dia"

#: flatcamEditors/FlatCAMExcEditor.py:1524 flatcamGUI/ObjectUI.py:1188
#: flatcamGUI/PreferencesUI.py:2640
msgid "Diameter for the new tool"
msgstr "Diameter for the new tool"

#: flatcamEditors/FlatCAMExcEditor.py:1532
msgid "Add Tool"
msgstr "Add Tool"

#: flatcamEditors/FlatCAMExcEditor.py:1534
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the tool list\n"
"with the diameter specified above."

#: flatcamEditors/FlatCAMExcEditor.py:1546
msgid "Delete Tool"
msgstr "Delete Tool"

#: flatcamEditors/FlatCAMExcEditor.py:1548
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."

#: flatcamEditors/FlatCAMExcEditor.py:1566 flatcamGUI/FlatCAMGUI.py:1704
msgid "Resize Drill(s)"
msgstr "Resize Drill(s)"

#: flatcamEditors/FlatCAMExcEditor.py:1568
msgid "Resize a drill or a selection of drills."
msgstr "Resize a drill or a selection of drills."

#: flatcamEditors/FlatCAMExcEditor.py:1575
msgid "Resize Dia"
msgstr "Resize Dia"

#: flatcamEditors/FlatCAMExcEditor.py:1577
msgid "Diameter to resize to."
msgstr "Diameter to resize to."

#: flatcamEditors/FlatCAMExcEditor.py:1585
msgid "Resize"
msgstr "Resize"

#: flatcamEditors/FlatCAMExcEditor.py:1587
msgid "Resize drill(s)"
msgstr "Resize drill(s)"

#: flatcamEditors/FlatCAMExcEditor.py:1612 flatcamGUI/FlatCAMGUI.py:1703
#: flatcamGUI/FlatCAMGUI.py:1913
msgid "Add Drill Array"
msgstr "Add Drill Array"

#: flatcamEditors/FlatCAMExcEditor.py:1614
msgid "Add an array of drills (linear or circular array)"
msgstr "Add an array of drills (linear or circular array)"

#: flatcamEditors/FlatCAMExcEditor.py:1620
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMExcEditor.py:1623
#: flatcamEditors/FlatCAMExcEditor.py:1825
#: flatcamEditors/FlatCAMGrbEditor.py:2682
msgid "Linear"
msgstr "Linear"

#: flatcamEditors/FlatCAMExcEditor.py:1624
#: flatcamEditors/FlatCAMExcEditor.py:1826
#: flatcamEditors/FlatCAMGrbEditor.py:2683 flatcamGUI/PreferencesUI.py:3719
#: flatcamTools/ToolNonCopperClear.py:216
msgid "Circular"
msgstr "Circular"

#: flatcamEditors/FlatCAMExcEditor.py:1632 flatcamGUI/PreferencesUI.py:2651
msgid "Nr of drills"
msgstr "Nr of drills"

#: flatcamEditors/FlatCAMExcEditor.py:1633 flatcamGUI/PreferencesUI.py:2653
msgid "Specify how many drills to be in the array."
msgstr "Specify how many drills to be in the array."

#: flatcamEditors/FlatCAMExcEditor.py:1650
#: flatcamEditors/FlatCAMExcEditor.py:1697
#: flatcamEditors/FlatCAMExcEditor.py:1761
#: flatcamEditors/FlatCAMExcEditor.py:1852
#: flatcamEditors/FlatCAMExcEditor.py:1899
#: flatcamEditors/FlatCAMGrbEditor.py:1524
#: flatcamEditors/FlatCAMGrbEditor.py:2709
#: flatcamEditors/FlatCAMGrbEditor.py:2754 flatcamGUI/PreferencesUI.py:2761
msgid "Direction"
msgstr "Direction"

#: flatcamEditors/FlatCAMExcEditor.py:1652
#: flatcamEditors/FlatCAMExcEditor.py:1854
#: flatcamEditors/FlatCAMGrbEditor.py:2711 flatcamGUI/PreferencesUI.py:1752
#: flatcamGUI/PreferencesUI.py:2669 flatcamGUI/PreferencesUI.py:2817
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"

#: flatcamEditors/FlatCAMExcEditor.py:1659
#: flatcamEditors/FlatCAMExcEditor.py:1770
#: flatcamEditors/FlatCAMExcEditor.py:1861
#: flatcamEditors/FlatCAMGrbEditor.py:2718 flatcamGUI/PreferencesUI.py:1758
#: flatcamGUI/PreferencesUI.py:2675 flatcamGUI/PreferencesUI.py:2770
#: flatcamGUI/PreferencesUI.py:2823 flatcamGUI/PreferencesUI.py:4479
#: flatcamTools/ToolFilm.py:233
msgid "X"
msgstr "X"

#: flatcamEditors/FlatCAMExcEditor.py:1660
#: flatcamEditors/FlatCAMExcEditor.py:1771
#: flatcamEditors/FlatCAMExcEditor.py:1862
#: flatcamEditors/FlatCAMGrbEditor.py:2719 flatcamGUI/PreferencesUI.py:1759
#: flatcamGUI/PreferencesUI.py:2676 flatcamGUI/PreferencesUI.py:2771
#: flatcamGUI/PreferencesUI.py:2824 flatcamGUI/PreferencesUI.py:4480
#: flatcamTools/ToolFilm.py:234
msgid "Y"
msgstr "Y"

#: flatcamEditors/FlatCAMExcEditor.py:1661
#: flatcamEditors/FlatCAMExcEditor.py:1675
#: flatcamEditors/FlatCAMExcEditor.py:1709
#: flatcamEditors/FlatCAMExcEditor.py:1772
#: flatcamEditors/FlatCAMExcEditor.py:1776
#: flatcamEditors/FlatCAMExcEditor.py:1863
#: flatcamEditors/FlatCAMExcEditor.py:1877
#: flatcamEditors/FlatCAMExcEditor.py:1911
#: flatcamEditors/FlatCAMGrbEditor.py:2720
#: flatcamEditors/FlatCAMGrbEditor.py:2733
#: flatcamEditors/FlatCAMGrbEditor.py:2769 flatcamGUI/PreferencesUI.py:1760
#: flatcamGUI/PreferencesUI.py:1778 flatcamGUI/PreferencesUI.py:2677
#: flatcamGUI/PreferencesUI.py:2696 flatcamGUI/PreferencesUI.py:2772
#: flatcamGUI/PreferencesUI.py:2777 flatcamGUI/PreferencesUI.py:2825
#: flatcamGUI/PreferencesUI.py:2846 flatcamGUI/PreferencesUI.py:4771
#: flatcamTools/ToolDistance.py:64 flatcamTools/ToolDistanceMin.py:67
#: flatcamTools/ToolTransform.py:62
msgid "Angle"
msgstr "Angle"

#: flatcamEditors/FlatCAMExcEditor.py:1665
#: flatcamEditors/FlatCAMExcEditor.py:1867
#: flatcamEditors/FlatCAMGrbEditor.py:2724 flatcamGUI/PreferencesUI.py:1766
#: flatcamGUI/PreferencesUI.py:2683 flatcamGUI/PreferencesUI.py:2831
msgid "Pitch"
msgstr "Pitch"

#: flatcamEditors/FlatCAMExcEditor.py:1667
#: flatcamEditors/FlatCAMExcEditor.py:1869
#: flatcamEditors/FlatCAMGrbEditor.py:2726 flatcamGUI/PreferencesUI.py:1768
#: flatcamGUI/PreferencesUI.py:2685 flatcamGUI/PreferencesUI.py:2833
msgid "Pitch = Distance between elements of the array."
msgstr "Pitch = Distance between elements of the array."

#: flatcamEditors/FlatCAMExcEditor.py:1677
#: flatcamEditors/FlatCAMExcEditor.py:1879
#: flatcamEditors/FlatCAMGrbEditor.py:2735
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: flatcamEditors/FlatCAMExcEditor.py:1698
#: flatcamEditors/FlatCAMExcEditor.py:1900
#: flatcamEditors/FlatCAMGrbEditor.py:2756
msgid ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."
msgstr ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."

#: flatcamEditors/FlatCAMExcEditor.py:1705
#: flatcamEditors/FlatCAMExcEditor.py:1907
#: flatcamEditors/FlatCAMGrbEditor.py:2764 flatcamGUI/PreferencesUI.py:1800
#: flatcamGUI/PreferencesUI.py:2425 flatcamGUI/PreferencesUI.py:2719
#: flatcamGUI/PreferencesUI.py:2869 flatcamGUI/PreferencesUI.py:3259
msgid "CW"
msgstr "CW"

#: flatcamEditors/FlatCAMExcEditor.py:1706
#: flatcamEditors/FlatCAMExcEditor.py:1908
#: flatcamEditors/FlatCAMGrbEditor.py:2765 flatcamGUI/PreferencesUI.py:1801
#: flatcamGUI/PreferencesUI.py:2426 flatcamGUI/PreferencesUI.py:2720
#: flatcamGUI/PreferencesUI.py:2870 flatcamGUI/PreferencesUI.py:3260
msgid "CCW"
msgstr "CCW"

#: flatcamEditors/FlatCAMExcEditor.py:1710
#: flatcamEditors/FlatCAMExcEditor.py:1912
#: flatcamEditors/FlatCAMGrbEditor.py:2771 flatcamGUI/PreferencesUI.py:1780
#: flatcamGUI/PreferencesUI.py:1809 flatcamGUI/PreferencesUI.py:2698
#: flatcamGUI/PreferencesUI.py:2728 flatcamGUI/PreferencesUI.py:2848
#: flatcamGUI/PreferencesUI.py:2878
msgid "Angle at which each element in circular array is placed."
msgstr "Angle at which each element in circular array is placed."

#: flatcamEditors/FlatCAMExcEditor.py:1740
msgid "Slot Parameters"
msgstr "Slot Parameters"

#: flatcamEditors/FlatCAMExcEditor.py:1742
msgid ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."
msgstr ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."

#: flatcamEditors/FlatCAMExcEditor.py:1751 flatcamGUI/PreferencesUI.py:2745
#: flatcamTools/ToolProperties.py:355
msgid "Length"
msgstr "Length"

#: flatcamEditors/FlatCAMExcEditor.py:1753 flatcamGUI/PreferencesUI.py:2747
msgid "Length = The length of the slot."
msgstr "Length = The length of the slot."

#: flatcamEditors/FlatCAMExcEditor.py:1763 flatcamGUI/PreferencesUI.py:2763
msgid ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"
msgstr ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"

#: flatcamEditors/FlatCAMExcEditor.py:1778 flatcamGUI/PreferencesUI.py:2779
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: flatcamEditors/FlatCAMExcEditor.py:1811
msgid "Slot Array Parameters"
msgstr "Slot Array Parameters"

#: flatcamEditors/FlatCAMExcEditor.py:1813
msgid "Parameters for the array of slots (linear or circular array)"
msgstr "Parameters for the array of slots (linear or circular array)"

#: flatcamEditors/FlatCAMExcEditor.py:1822
msgid ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMExcEditor.py:1834 flatcamGUI/PreferencesUI.py:2802
msgid "Nr of slots"
msgstr "Nr of slots"

#: flatcamEditors/FlatCAMExcEditor.py:1835 flatcamGUI/PreferencesUI.py:2804
msgid "Specify how many slots to be in the array."
msgstr "Specify how many slots to be in the array."

#: flatcamEditors/FlatCAMExcEditor.py:2442
msgid ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "

#: flatcamEditors/FlatCAMExcEditor.py:2451 flatcamGUI/FlatCAMGUI.py:3387
msgid "Added new tool with dia"
msgstr "Added new tool with dia"

#: flatcamEditors/FlatCAMExcEditor.py:2485
msgid "Select a tool in Tool Table"
msgstr "Select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:2518
msgid "Deleted tool with diameter"
msgstr "Deleted tool with diameter"

#: flatcamEditors/FlatCAMExcEditor.py:2668
msgid "Done. Tool edit completed."
msgstr "Done. Tool edit completed."

#: flatcamEditors/FlatCAMExcEditor.py:3213
msgid "There are no Tools definitions in the file. Aborting Excellon creation."
msgstr ""
"There are no Tools definitions in the file. Aborting Excellon creation."

#: flatcamEditors/FlatCAMExcEditor.py:3217
msgid "An internal error has ocurred. See Shell.\n"
msgstr "An internal error has ocurred. See Shell.\n"

#: flatcamEditors/FlatCAMExcEditor.py:3222
msgid "Creating Excellon."
msgstr "Creating Excellon."

#: flatcamEditors/FlatCAMExcEditor.py:3236
msgid "Excellon editing finished."
msgstr "Excellon editing finished."

#: flatcamEditors/FlatCAMExcEditor.py:3254
msgid "Cancelled. There is no Tool/Drill selected"
msgstr "Cancelled. There is no Tool/Drill selected"

#: flatcamEditors/FlatCAMExcEditor.py:3862
msgid "Done. Drill(s) deleted."
msgstr "Done. Drill(s) deleted."

#: flatcamEditors/FlatCAMExcEditor.py:3935
#: flatcamEditors/FlatCAMExcEditor.py:3945
#: flatcamEditors/FlatCAMGrbEditor.py:4700
msgid "Click on the circular array Center position"
msgstr "Click on the circular array Center position"

#: flatcamEditors/FlatCAMGeoEditor.py:85
msgid "Buffer distance:"
msgstr "Buffer distance:"

#: flatcamEditors/FlatCAMGeoEditor.py:86
msgid "Buffer corner:"
msgstr "Buffer corner:"

#: flatcamEditors/FlatCAMGeoEditor.py:88
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: flatcamEditors/FlatCAMGeoEditor.py:94
#: flatcamEditors/FlatCAMGrbEditor.py:2540
msgid "Round"
msgstr "Round"

#: flatcamEditors/FlatCAMGeoEditor.py:95
#: flatcamEditors/FlatCAMGrbEditor.py:2541
msgid "Square"
msgstr "Square"

#: flatcamEditors/FlatCAMGeoEditor.py:96
#: flatcamEditors/FlatCAMGrbEditor.py:2542
msgid "Beveled"
msgstr "Beveled"

#: flatcamEditors/FlatCAMGeoEditor.py:103
msgid "Buffer Interior"
msgstr "Buffer Interior"

#: flatcamEditors/FlatCAMGeoEditor.py:105
msgid "Buffer Exterior"
msgstr "Buffer Exterior"

#: flatcamEditors/FlatCAMGeoEditor.py:111
msgid "Full Buffer"
msgstr "Full Buffer"

#: flatcamEditors/FlatCAMGeoEditor.py:132
#: flatcamEditors/FlatCAMGeoEditor.py:2768 flatcamGUI/FlatCAMGUI.py:1613
#: flatcamGUI/PreferencesUI.py:1820
msgid "Buffer Tool"
msgstr "Buffer Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:144
#: flatcamEditors/FlatCAMGeoEditor.py:161
#: flatcamEditors/FlatCAMGeoEditor.py:178
#: flatcamEditors/FlatCAMGeoEditor.py:2788
#: flatcamEditors/FlatCAMGeoEditor.py:2818
#: flatcamEditors/FlatCAMGeoEditor.py:2848
#: flatcamEditors/FlatCAMGrbEditor.py:4753
msgid "Buffer distance value is missing or wrong format. Add it and retry."
msgstr "Buffer distance value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:241
msgid "Font"
msgstr "Font"

#: flatcamEditors/FlatCAMGeoEditor.py:322 flatcamGUI/FlatCAMGUI.py:1874
msgid "Text"
msgstr "Text"

#: flatcamEditors/FlatCAMGeoEditor.py:348
msgid "Text Tool"
msgstr "Text Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:437 flatcamGUI/ObjectUI.py:335
#: flatcamGUI/PreferencesUI.py:1301 flatcamGUI/PreferencesUI.py:2933
#: flatcamGUI/PreferencesUI.py:3978 flatcamGUI/PreferencesUI.py:4156
#: flatcamTools/ToolCutOut.py:112
msgid "Tool dia"
msgstr "Tool dia"

#: flatcamEditors/FlatCAMGeoEditor.py:439 flatcamGUI/PreferencesUI.py:4158
msgid ""
"Diameter of the tool to\n"
"be used in the operation."
msgstr ""
"Diameter of the tool to\n"
"be used in the operation."

#: flatcamEditors/FlatCAMGeoEditor.py:448 flatcamGUI/PreferencesUI.py:3815
#: flatcamGUI/PreferencesUI.py:4188 flatcamTools/ToolNonCopperClear.py:308
#: flatcamTools/ToolPaint.py:219
msgid "Overlap Rate"
msgstr "Overlap Rate"

#: flatcamEditors/FlatCAMGeoEditor.py:450 flatcamGUI/PreferencesUI.py:4190
#: flatcamTools/ToolPaint.py:221
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: flatcamEditors/FlatCAMGeoEditor.py:466 flatcamGUI/PreferencesUI.py:3836
#: flatcamGUI/PreferencesUI.py:4006 flatcamGUI/PreferencesUI.py:4210
#: flatcamTools/ToolNonCopperClear.py:328 flatcamTools/ToolPaint.py:240
msgid "Margin"
msgstr "Margin"

#: flatcamEditors/FlatCAMGeoEditor.py:468 flatcamGUI/PreferencesUI.py:4212
#: flatcamTools/ToolPaint.py:242
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."

#: flatcamEditors/FlatCAMGeoEditor.py:477 flatcamGUI/PreferencesUI.py:3849
#: flatcamGUI/PreferencesUI.py:4225 flatcamTools/ToolNonCopperClear.py:339
#: flatcamTools/ToolPaint.py:253
msgid "Method"
msgstr "Method"

#: flatcamEditors/FlatCAMGeoEditor.py:479
msgid ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."
msgstr ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."

#: flatcamEditors/FlatCAMGeoEditor.py:485 flatcamGUI/PreferencesUI.py:3858
#: flatcamGUI/PreferencesUI.py:4234 flatcamTools/ToolNonCopperClear.py:348
#: flatcamTools/ToolPaint.py:262
msgid "Standard"
msgstr "Standard"

#: flatcamEditors/FlatCAMGeoEditor.py:486 flatcamGUI/PreferencesUI.py:3859
#: flatcamGUI/PreferencesUI.py:4235 flatcamTools/ToolNonCopperClear.py:349
#: flatcamTools/ToolPaint.py:263
msgid "Seed-based"
msgstr "Seed-based"

#: flatcamEditors/FlatCAMGeoEditor.py:487 flatcamGUI/PreferencesUI.py:3860
#: flatcamGUI/PreferencesUI.py:4236 flatcamTools/ToolNonCopperClear.py:350
#: flatcamTools/ToolPaint.py:264
msgid "Straight lines"
msgstr "Straight lines"

#: flatcamEditors/FlatCAMGeoEditor.py:492
msgid "Connect:"
msgstr "Connect:"

#: flatcamEditors/FlatCAMGeoEditor.py:494 flatcamGUI/PreferencesUI.py:3867
#: flatcamGUI/PreferencesUI.py:4243 flatcamTools/ToolNonCopperClear.py:357
#: flatcamTools/ToolPaint.py:271
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."

#: flatcamEditors/FlatCAMGeoEditor.py:501
msgid "Contour:"
msgstr "Contour:"

#: flatcamEditors/FlatCAMGeoEditor.py:503 flatcamGUI/PreferencesUI.py:3877
#: flatcamGUI/PreferencesUI.py:4253 flatcamTools/ToolNonCopperClear.py:366
#: flatcamTools/ToolPaint.py:280
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."

#: flatcamEditors/FlatCAMGeoEditor.py:514 flatcamGUI/FlatCAMGUI.py:1876
msgid "Paint"
msgstr "Paint"

#: flatcamEditors/FlatCAMGeoEditor.py:532 flatcamGUI/FlatCAMGUI.py:744
#: flatcamGUI/FlatCAMGUI.py:2160 flatcamGUI/ObjectUI.py:1563
#: flatcamTools/ToolPaint.py:41 flatcamTools/ToolPaint.py:509
msgid "Paint Tool"
msgstr "Paint Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:569
msgid "Paint cancelled. No shape selected."
msgstr "Paint cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:581 flatcamTools/ToolDblSided.py:380
msgid "Tool diameter value is missing or wrong format. Add it and retry."
msgstr "Tool diameter value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:592
msgid "Overlap value is missing or wrong format. Add it and retry."
msgstr "Overlap value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:604
msgid "Margin distance value is missing or wrong format. Add it and retry."
msgstr "Margin distance value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:612
#: flatcamEditors/FlatCAMGeoEditor.py:2794
#: flatcamEditors/FlatCAMGeoEditor.py:2824
#: flatcamEditors/FlatCAMGeoEditor.py:2854 flatcamGUI/PreferencesUI.py:2929
#: flatcamTools/ToolProperties.py:118 flatcamTools/ToolProperties.py:144
msgid "Tools"
msgstr "Tools"

#: flatcamEditors/FlatCAMGeoEditor.py:623
#: flatcamEditors/FlatCAMGeoEditor.py:997
#: flatcamEditors/FlatCAMGrbEditor.py:4944
#: flatcamEditors/FlatCAMGrbEditor.py:5329 flatcamGUI/FlatCAMGUI.py:757
#: flatcamGUI/FlatCAMGUI.py:2173 flatcamTools/ToolTransform.py:371
msgid "Transform Tool"
msgstr "Transform Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:624
#: flatcamEditors/FlatCAMGeoEditor.py:686
#: flatcamEditors/FlatCAMGrbEditor.py:4945
#: flatcamEditors/FlatCAMGrbEditor.py:5007 flatcamGUI/PreferencesUI.py:4763
#: flatcamTools/ToolTransform.py:25 flatcamTools/ToolTransform.py:79
msgid "Rotate"
msgstr "Rotate"

#: flatcamEditors/FlatCAMGeoEditor.py:625
#: flatcamEditors/FlatCAMGrbEditor.py:4946 flatcamTools/ToolTransform.py:26
msgid "Skew/Shear"
msgstr "Skew/Shear"

#: flatcamEditors/FlatCAMGeoEditor.py:626
#: flatcamEditors/FlatCAMGrbEditor.py:2587
#: flatcamEditors/FlatCAMGrbEditor.py:4947 flatcamGUI/FlatCAMGUI.py:832
#: flatcamGUI/FlatCAMGUI.py:1825 flatcamGUI/FlatCAMGUI.py:1903
#: flatcamGUI/FlatCAMGUI.py:2244 flatcamGUI/ObjectUI.py:85
#: flatcamGUI/ObjectUI.py:106 flatcamGUI/PreferencesUI.py:4813
#: flatcamTools/ToolTransform.py:27
msgid "Scale"
msgstr "Scale"

#: flatcamEditors/FlatCAMGeoEditor.py:627
#: flatcamEditors/FlatCAMGrbEditor.py:4948 flatcamTools/ToolTransform.py:28
msgid "Mirror (Flip)"
msgstr "Mirror (Flip)"

#: flatcamEditors/FlatCAMGeoEditor.py:628
#: flatcamEditors/FlatCAMGrbEditor.py:4949 flatcamGUI/ObjectUI.py:117
#: flatcamGUI/ObjectUI.py:132 flatcamGUI/ObjectUI.py:1097
#: flatcamGUI/ObjectUI.py:1709 flatcamGUI/PreferencesUI.py:3900
#: flatcamGUI/PreferencesUI.py:4860 flatcamTools/ToolNonCopperClear.py:388
#: flatcamTools/ToolTransform.py:29
msgid "Offset"
msgstr "Offset"

#: flatcamEditors/FlatCAMGeoEditor.py:640
#: flatcamEditors/FlatCAMGrbEditor.py:4961 flatcamGUI/FlatCAMGUI.py:704
#: flatcamGUI/FlatCAMGUI.py:2126
msgid "Editor"
msgstr "Editor"

#: flatcamEditors/FlatCAMGeoEditor.py:672
#: flatcamEditors/FlatCAMGrbEditor.py:4993
msgid "Angle:"
msgstr "Angle:"

#: flatcamEditors/FlatCAMGeoEditor.py:674
#: flatcamEditors/FlatCAMGrbEditor.py:4995 flatcamGUI/PreferencesUI.py:4773
#: flatcamTools/ToolTransform.py:64
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."

#: flatcamEditors/FlatCAMGeoEditor.py:688
#: flatcamEditors/FlatCAMGrbEditor.py:5009
msgid ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: flatcamEditors/FlatCAMGeoEditor.py:711
#: flatcamEditors/FlatCAMGrbEditor.py:5032
msgid "Angle X:"
msgstr "Angle X:"

#: flatcamEditors/FlatCAMGeoEditor.py:713
#: flatcamEditors/FlatCAMGeoEditor.py:731
#: flatcamEditors/FlatCAMGrbEditor.py:5034
#: flatcamEditors/FlatCAMGrbEditor.py:5052 flatcamGUI/PreferencesUI.py:4792
#: flatcamGUI/PreferencesUI.py:4806
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."

#: flatcamEditors/FlatCAMGeoEditor.py:722
#: flatcamEditors/FlatCAMGrbEditor.py:5043 flatcamTools/ToolTransform.py:108
msgid "Skew X"
msgstr "Skew X"

#: flatcamEditors/FlatCAMGeoEditor.py:724
#: flatcamEditors/FlatCAMGeoEditor.py:742
#: flatcamEditors/FlatCAMGrbEditor.py:5045
#: flatcamEditors/FlatCAMGrbEditor.py:5063
msgid ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: flatcamEditors/FlatCAMGeoEditor.py:729
#: flatcamEditors/FlatCAMGrbEditor.py:5050
msgid "Angle Y:"
msgstr "Angle Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:740
#: flatcamEditors/FlatCAMGrbEditor.py:5061 flatcamTools/ToolTransform.py:130
msgid "Skew Y"
msgstr "Skew Y"

#: flatcamEditors/FlatCAMGeoEditor.py:768
#: flatcamEditors/FlatCAMGrbEditor.py:5089
msgid "Factor X:"
msgstr "Factor X:"

#: flatcamEditors/FlatCAMGeoEditor.py:770
#: flatcamEditors/FlatCAMGrbEditor.py:5091
msgid "Factor for Scale action over X axis."
msgstr "Factor for Scale action over X axis."

#: flatcamEditors/FlatCAMGeoEditor.py:778
#: flatcamEditors/FlatCAMGrbEditor.py:5099 flatcamTools/ToolTransform.py:157
msgid "Scale X"
msgstr "Scale X"

#: flatcamEditors/FlatCAMGeoEditor.py:780
#: flatcamEditors/FlatCAMGeoEditor.py:797
#: flatcamEditors/FlatCAMGrbEditor.py:5101
#: flatcamEditors/FlatCAMGrbEditor.py:5118
msgid ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: flatcamEditors/FlatCAMGeoEditor.py:785
#: flatcamEditors/FlatCAMGrbEditor.py:5106
msgid "Factor Y:"
msgstr "Factor Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:787
#: flatcamEditors/FlatCAMGrbEditor.py:5108
msgid "Factor for Scale action over Y axis."
msgstr "Factor for Scale action over Y axis."

#: flatcamEditors/FlatCAMGeoEditor.py:795
#: flatcamEditors/FlatCAMGrbEditor.py:5116 flatcamTools/ToolTransform.py:178
msgid "Scale Y"
msgstr "Scale Y"

#: flatcamEditors/FlatCAMGeoEditor.py:804
#: flatcamEditors/FlatCAMGrbEditor.py:5125 flatcamGUI/PreferencesUI.py:4842
#: flatcamTools/ToolTransform.py:191
msgid "Link"
msgstr "Link"

#: flatcamEditors/FlatCAMGeoEditor.py:806
#: flatcamEditors/FlatCAMGrbEditor.py:5127
msgid ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."

#: flatcamEditors/FlatCAMGeoEditor.py:812
#: flatcamEditors/FlatCAMGrbEditor.py:5133 flatcamGUI/PreferencesUI.py:4850
#: flatcamTools/ToolTransform.py:199
msgid "Scale Reference"
msgstr "Scale Reference"

#: flatcamEditors/FlatCAMGeoEditor.py:814
#: flatcamEditors/FlatCAMGrbEditor.py:5135
msgid ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."
msgstr ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."

#: flatcamEditors/FlatCAMGeoEditor.py:842
#: flatcamEditors/FlatCAMGrbEditor.py:5164
msgid "Value X:"
msgstr "Value X:"

#: flatcamEditors/FlatCAMGeoEditor.py:844
#: flatcamEditors/FlatCAMGrbEditor.py:5166
msgid "Value for Offset action on X axis."
msgstr "Value for Offset action on X axis."

#: flatcamEditors/FlatCAMGeoEditor.py:852
#: flatcamEditors/FlatCAMGrbEditor.py:5174 flatcamTools/ToolTransform.py:226
msgid "Offset X"
msgstr "Offset X"

#: flatcamEditors/FlatCAMGeoEditor.py:854
#: flatcamEditors/FlatCAMGeoEditor.py:872
#: flatcamEditors/FlatCAMGrbEditor.py:5176
#: flatcamEditors/FlatCAMGrbEditor.py:5194
msgid ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"
msgstr ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"

#: flatcamEditors/FlatCAMGeoEditor.py:860
#: flatcamEditors/FlatCAMGrbEditor.py:5182
msgid "Value Y:"
msgstr "Value Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:862
#: flatcamEditors/FlatCAMGrbEditor.py:5184
msgid "Value for Offset action on Y axis."
msgstr "Value for Offset action on Y axis."

#: flatcamEditors/FlatCAMGeoEditor.py:870
#: flatcamEditors/FlatCAMGrbEditor.py:5192 flatcamTools/ToolTransform.py:247
msgid "Offset Y"
msgstr "Offset Y"

#: flatcamEditors/FlatCAMGeoEditor.py:901
#: flatcamEditors/FlatCAMGrbEditor.py:5223 flatcamTools/ToolTransform.py:265
msgid "Flip on X"
msgstr "Flip on X"

#: flatcamEditors/FlatCAMGeoEditor.py:903
#: flatcamEditors/FlatCAMGeoEditor.py:911
#: flatcamEditors/FlatCAMGrbEditor.py:5225
#: flatcamEditors/FlatCAMGrbEditor.py:5233
msgid ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."
msgstr ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."

#: flatcamEditors/FlatCAMGeoEditor.py:909
#: flatcamEditors/FlatCAMGrbEditor.py:5231 flatcamTools/ToolTransform.py:271
msgid "Flip on Y"
msgstr "Flip on Y"

#: flatcamEditors/FlatCAMGeoEditor.py:918
#: flatcamEditors/FlatCAMGrbEditor.py:5240
msgid "Ref Pt"
msgstr "Ref Pt"

#: flatcamEditors/FlatCAMGeoEditor.py:920
#: flatcamEditors/FlatCAMGrbEditor.py:5242
msgid ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: flatcamEditors/FlatCAMGeoEditor.py:932
#: flatcamEditors/FlatCAMGrbEditor.py:5254
msgid "Point:"
msgstr "Point:"

#: flatcamEditors/FlatCAMGeoEditor.py:934
#: flatcamEditors/FlatCAMGrbEditor.py:5256 flatcamTools/ToolTransform.py:300
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."

#: flatcamEditors/FlatCAMGeoEditor.py:946
#: flatcamEditors/FlatCAMGrbEditor.py:5268 flatcamTools/ToolTransform.py:311
msgid ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."
msgstr ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."

#: flatcamEditors/FlatCAMGeoEditor.py:1062
#: flatcamEditors/FlatCAMGrbEditor.py:5394
msgid "Transformation cancelled. No shape selected."
msgstr "Transformation cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:1263
#: flatcamEditors/FlatCAMGrbEditor.py:5640
msgid "No shape selected. Please Select a shape to rotate!"
msgstr "No shape selected. Please Select a shape to rotate!"

#: flatcamEditors/FlatCAMGeoEditor.py:1266
#: flatcamEditors/FlatCAMGrbEditor.py:5643 flatcamTools/ToolTransform.py:545
msgid "Appying Rotate"
msgstr "Appying Rotate"

#: flatcamEditors/FlatCAMGeoEditor.py:1295
#: flatcamEditors/FlatCAMGrbEditor.py:5677
msgid "Done. Rotate completed."
msgstr "Done. Rotate completed."

#: flatcamEditors/FlatCAMGeoEditor.py:1301
msgid "Rotation action was not executed"
msgstr "Rotation action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1313
#: flatcamEditors/FlatCAMGrbEditor.py:5698
msgid "No shape selected. Please Select a shape to flip!"
msgstr "No shape selected. Please Select a shape to flip!"

#: flatcamEditors/FlatCAMGeoEditor.py:1316
#: flatcamEditors/FlatCAMGrbEditor.py:5701 flatcamTools/ToolTransform.py:598
msgid "Applying Flip"
msgstr "Applying Flip"

#: flatcamEditors/FlatCAMGeoEditor.py:1347
#: flatcamEditors/FlatCAMGrbEditor.py:5741 flatcamTools/ToolTransform.py:641
msgid "Flip on the Y axis done"
msgstr "Flip on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1351
#: flatcamEditors/FlatCAMGrbEditor.py:5750 flatcamTools/ToolTransform.py:651
msgid "Flip on the X axis done"
msgstr "Flip on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1362
msgid "Flip action was not executed"
msgstr "Flip action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1372
#: flatcamEditors/FlatCAMGrbEditor.py:5772
msgid "No shape selected. Please Select a shape to shear/skew!"
msgstr "No shape selected. Please Select a shape to shear/skew!"

#: flatcamEditors/FlatCAMGeoEditor.py:1375
#: flatcamEditors/FlatCAMGrbEditor.py:5775 flatcamTools/ToolTransform.py:676
msgid "Applying Skew"
msgstr "Applying Skew"

#: flatcamEditors/FlatCAMGeoEditor.py:1401
#: flatcamEditors/FlatCAMGrbEditor.py:5812
msgid "Skew on the X axis done"
msgstr "Skew on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1404
#: flatcamEditors/FlatCAMGrbEditor.py:5815
msgid "Skew on the Y axis done"
msgstr "Skew on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1409
msgid "Skew action was not executed"
msgstr "Skew action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1421
#: flatcamEditors/FlatCAMGrbEditor.py:5840
msgid "No shape selected. Please Select a shape to scale!"
msgstr "No shape selected. Please Select a shape to scale!"

#: flatcamEditors/FlatCAMGeoEditor.py:1424
#: flatcamEditors/FlatCAMGrbEditor.py:5843 flatcamTools/ToolTransform.py:728
msgid "Applying Scale"
msgstr "Applying Scale"

#: flatcamEditors/FlatCAMGeoEditor.py:1459
#: flatcamEditors/FlatCAMGrbEditor.py:5883
msgid "Scale on the X axis done"
msgstr "Scale on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1462
#: flatcamEditors/FlatCAMGrbEditor.py:5886
msgid "Scale on the Y axis done"
msgstr "Scale on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1466
msgid "Scale action was not executed"
msgstr "Scale action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1476
#: flatcamEditors/FlatCAMGrbEditor.py:5904
msgid "No shape selected. Please Select a shape to offset!"
msgstr "No shape selected. Please Select a shape to offset!"

#: flatcamEditors/FlatCAMGeoEditor.py:1479
#: flatcamEditors/FlatCAMGrbEditor.py:5907 flatcamTools/ToolTransform.py:783
msgid "Applying Offset"
msgstr "Applying Offset"

#: flatcamEditors/FlatCAMGeoEditor.py:1492
#: flatcamEditors/FlatCAMGrbEditor.py:5931
msgid "Offset on the X axis done"
msgstr "Offset on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1495
#: flatcamEditors/FlatCAMGrbEditor.py:5934
msgid "Offset on the Y axis done"
msgstr "Offset on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1500
msgid "Offset action was not executed"
msgstr "Offset action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1504
#: flatcamEditors/FlatCAMGrbEditor.py:5943
msgid "Rotate ..."
msgstr "Rotate ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1505
#: flatcamEditors/FlatCAMGeoEditor.py:1560
#: flatcamEditors/FlatCAMGeoEditor.py:1577
#: flatcamEditors/FlatCAMGrbEditor.py:5944
#: flatcamEditors/FlatCAMGrbEditor.py:5999
#: flatcamEditors/FlatCAMGrbEditor.py:6016
msgid "Enter an Angle Value (degrees)"
msgstr "Enter an Angle Value (degrees)"

#: flatcamEditors/FlatCAMGeoEditor.py:1514
#: flatcamEditors/FlatCAMGrbEditor.py:5953
msgid "Geometry shape rotate done"
msgstr "Geometry shape rotate done"

#: flatcamEditors/FlatCAMGeoEditor.py:1518
#: flatcamEditors/FlatCAMGrbEditor.py:5957
msgid "Geometry shape rotate cancelled"
msgstr "Geometry shape rotate cancelled"

#: flatcamEditors/FlatCAMGeoEditor.py:1523
#: flatcamEditors/FlatCAMGrbEditor.py:5962
msgid "Offset on X axis ..."
msgstr "Offset on X axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1524
#: flatcamEditors/FlatCAMGeoEditor.py:1543
#: flatcamEditors/FlatCAMGrbEditor.py:5963
#: flatcamEditors/FlatCAMGrbEditor.py:5982
msgid "Enter a distance Value"
msgstr "Enter a distance Value"

#: flatcamEditors/FlatCAMGeoEditor.py:1533
#: flatcamEditors/FlatCAMGrbEditor.py:5972
msgid "Geometry shape offset on X axis done"
msgstr "Geometry shape offset on X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1537
#: flatcamEditors/FlatCAMGrbEditor.py:5976
msgid "Geometry shape offset X cancelled"
msgstr "Geometry shape offset X cancelled"

#: flatcamEditors/FlatCAMGeoEditor.py:1542
#: flatcamEditors/FlatCAMGrbEditor.py:5981
msgid "Offset on Y axis ..."
msgstr "Offset on Y axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1552
#: flatcamEditors/FlatCAMGrbEditor.py:5991
msgid "Geometry shape offset on Y axis done"
msgstr "Geometry shape offset on Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1556
msgid "Geometry shape offset on Y axis canceled"
msgstr "Geometry shape offset on Y axis canceled"

#: flatcamEditors/FlatCAMGeoEditor.py:1559
#: flatcamEditors/FlatCAMGrbEditor.py:5998
msgid "Skew on X axis ..."
msgstr "Skew on X axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1569
#: flatcamEditors/FlatCAMGrbEditor.py:6008
msgid "Geometry shape skew on X axis done"
msgstr "Geometry shape skew on X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1573
msgid "Geometry shape skew on X axis canceled"
msgstr "Geometry shape skew on X axis canceled"

#: flatcamEditors/FlatCAMGeoEditor.py:1576
#: flatcamEditors/FlatCAMGrbEditor.py:6015
msgid "Skew on Y axis ..."
msgstr "Skew on Y axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1586
#: flatcamEditors/FlatCAMGrbEditor.py:6025
msgid "Geometry shape skew on Y axis done"
msgstr "Geometry shape skew on Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1590
msgid "Geometry shape skew on Y axis canceled"
msgstr "Geometry shape skew on Y axis canceled"

#: flatcamEditors/FlatCAMGeoEditor.py:1954
#: flatcamEditors/FlatCAMGeoEditor.py:2006
#: flatcamEditors/FlatCAMGrbEditor.py:1397
#: flatcamEditors/FlatCAMGrbEditor.py:1467
msgid "Click on Center point ..."
msgstr "Click on Center point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1961
#: flatcamEditors/FlatCAMGrbEditor.py:1405
msgid "Click on Perimeter point to complete ..."
msgstr "Click on Perimeter point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1991
msgid "Done. Adding Circle completed."
msgstr "Done. Adding Circle completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2026
#: flatcamEditors/FlatCAMGrbEditor.py:1499
msgid "Click on Start point ..."
msgstr "Click on Start point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2028
#: flatcamEditors/FlatCAMGrbEditor.py:1501
msgid "Click on Point3 ..."
msgstr "Click on Point3 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2030
#: flatcamEditors/FlatCAMGrbEditor.py:1503
msgid "Click on Stop point ..."
msgstr "Click on Stop point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2035
#: flatcamEditors/FlatCAMGrbEditor.py:1508
msgid "Click on Stop point to complete ..."
msgstr "Click on Stop point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2037
#: flatcamEditors/FlatCAMGrbEditor.py:1510
msgid "Click on Point2 to complete ..."
msgstr "Click on Point2 to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2039
#: flatcamEditors/FlatCAMGrbEditor.py:1512
msgid "Click on Center point to complete ..."
msgstr "Click on Center point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2051
#, python-format
msgid "Direction: %s"
msgstr "Direction: %s"

#: flatcamEditors/FlatCAMGeoEditor.py:2061
#: flatcamEditors/FlatCAMGrbEditor.py:1534
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr "Mode: Start -> Stop -> Center. Click on Start point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2064
#: flatcamEditors/FlatCAMGrbEditor.py:1537
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2067
#: flatcamEditors/FlatCAMGrbEditor.py:1540
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr "Mode: Center -> Start -> Stop. Click on Center point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2206
msgid "Done. Arc completed."
msgstr "Done. Arc completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2225
#: flatcamEditors/FlatCAMGeoEditor.py:2279
#: flatcamEditors/FlatCAMGeoEditor.py:2706
msgid "Click on 1st corner ..."
msgstr "Click on 1st corner ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2231
msgid "Click on opposite corner to complete ..."
msgstr "Click on opposite corner to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2260
msgid "Done. Rectangle completed."
msgstr "Done. Rectangle completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2286
msgid "Click on next Point or click right mouse button to complete ..."
msgstr "Click on next Point or click right mouse button to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2315
msgid "Done. Polygon completed."
msgstr "Done. Polygon completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2325
#: flatcamEditors/FlatCAMGeoEditor.py:2371
#: flatcamEditors/FlatCAMGrbEditor.py:1086
#: flatcamEditors/FlatCAMGrbEditor.py:1288
msgid "Backtracked one point ..."
msgstr "Backtracked one point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2353
msgid "Done. Path completed."
msgstr "Done. Path completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2471
msgid "No shape selected. Select a shape to explode"
msgstr "No shape selected. Select a shape to explode"

#: flatcamEditors/FlatCAMGeoEditor.py:2504
msgid "Done. Polygons exploded into lines."
msgstr "Done. Polygons exploded into lines."

#: flatcamEditors/FlatCAMGeoEditor.py:2526
msgid "MOVE: No shape selected. Select a shape to move"
msgstr "MOVE: No shape selected. Select a shape to move"

#: flatcamEditors/FlatCAMGeoEditor.py:2528
#: flatcamEditors/FlatCAMGeoEditor.py:2540
msgid " MOVE: Click on reference point ..."
msgstr " MOVE: Click on reference point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2531
msgid " Click on destination point ..."
msgstr " Click on destination point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2566
msgid "Done. Geometry(s) Move completed."
msgstr "Done. Geometry(s) Move completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2687
msgid "Done. Geometry(s) Copy completed."
msgstr "Done. Geometry(s) Copy completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2723
msgid ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"
msgstr ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"

#: flatcamEditors/FlatCAMGeoEditor.py:2730
msgid "No text to add."
msgstr "No text to add."

#: flatcamEditors/FlatCAMGeoEditor.py:2736
msgid " Done. Adding Text completed."
msgstr " Done. Adding Text completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2764
msgid "Create buffer geometry ..."
msgstr "Create buffer geometry ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2776
#: flatcamEditors/FlatCAMGeoEditor.py:2806
#: flatcamEditors/FlatCAMGeoEditor.py:2836
msgid "Buffer cancelled. No shape selected."
msgstr "Buffer cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:2801
#: flatcamEditors/FlatCAMGrbEditor.py:4798
msgid "Done. Buffer Tool completed."
msgstr "Done. Buffer Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2831
msgid "Done. Buffer Int Tool completed."
msgstr "Done. Buffer Int Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2861
msgid "Done. Buffer Ext Tool completed."
msgstr "Done. Buffer Ext Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2896
#: flatcamEditors/FlatCAMGrbEditor.py:2087
msgid "Select a shape to act as deletion area ..."
msgstr "Select a shape to act as deletion area ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2898
#: flatcamEditors/FlatCAMGeoEditor.py:2917
#: flatcamEditors/FlatCAMGeoEditor.py:2923
#: flatcamEditors/FlatCAMGrbEditor.py:2089
msgid "Click to pick-up the erase shape..."
msgstr "Click to pick-up the erase shape..."

#: flatcamEditors/FlatCAMGeoEditor.py:2927
#: flatcamEditors/FlatCAMGrbEditor.py:2146
msgid "Click to erase ..."
msgstr "Click to erase ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2957
#: flatcamEditors/FlatCAMGrbEditor.py:2180
msgid "Done. Eraser tool action completed."
msgstr "Done. Eraser tool action completed."

#: flatcamEditors/FlatCAMGeoEditor.py:3000
msgid "Create Paint geometry ..."
msgstr "Create Paint geometry ..."

#: flatcamEditors/FlatCAMGeoEditor.py:3014
#: flatcamEditors/FlatCAMGrbEditor.py:2331
msgid "Shape transformations ..."
msgstr "Shape transformations ..."

#: flatcamEditors/FlatCAMGeoEditor.py:3630
msgid "Editing MultiGeo Geometry, tool"
msgstr "Editing MultiGeo Geometry, tool"

#: flatcamEditors/FlatCAMGeoEditor.py:3632
msgid "with diameter"
msgstr "with diameter"

#: flatcamEditors/FlatCAMGeoEditor.py:4034
msgid "Copy cancelled. No shape selected."
msgstr "Copy cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:4041 flatcamGUI/FlatCAMGUI.py:3096
#: flatcamGUI/FlatCAMGUI.py:3143 flatcamGUI/FlatCAMGUI.py:3162
#: flatcamGUI/FlatCAMGUI.py:3297 flatcamGUI/FlatCAMGUI.py:3310
#: flatcamGUI/FlatCAMGUI.py:3344 flatcamGUI/FlatCAMGUI.py:3406
msgid "Click on target point."
msgstr "Click on target point."

#: flatcamEditors/FlatCAMGeoEditor.py:4335
#: flatcamEditors/FlatCAMGeoEditor.py:4370
msgid "A selection of at least 2 geo items is required to do Intersection."
msgstr "A selection of at least 2 geo items is required to do Intersection."

#: flatcamEditors/FlatCAMGeoEditor.py:4456
#: flatcamEditors/FlatCAMGeoEditor.py:4560
msgid ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"
msgstr ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"

#: flatcamEditors/FlatCAMGeoEditor.py:4466
#: flatcamEditors/FlatCAMGeoEditor.py:4519
#: flatcamEditors/FlatCAMGeoEditor.py:4569
msgid "Nothing selected for buffering."
msgstr "Nothing selected for buffering."

#: flatcamEditors/FlatCAMGeoEditor.py:4471
#: flatcamEditors/FlatCAMGeoEditor.py:4523
#: flatcamEditors/FlatCAMGeoEditor.py:4574
msgid "Invalid distance for buffering."
msgstr "Invalid distance for buffering."

#: flatcamEditors/FlatCAMGeoEditor.py:4495
#: flatcamEditors/FlatCAMGeoEditor.py:4594
msgid "Failed, the result is empty. Choose a different buffer value."
msgstr "Failed, the result is empty. Choose a different buffer value."

#: flatcamEditors/FlatCAMGeoEditor.py:4506
msgid "Full buffer geometry created."
msgstr "Full buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4512
msgid "Negative buffer value is not accepted."
msgstr "Negative buffer value is not accepted."

#: flatcamEditors/FlatCAMGeoEditor.py:4543
msgid "Failed, the result is empty. Choose a smaller buffer value."
msgstr "Failed, the result is empty. Choose a smaller buffer value."

#: flatcamEditors/FlatCAMGeoEditor.py:4553
msgid "Interior buffer geometry created."
msgstr "Interior buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4604
msgid "Exterior buffer geometry created."
msgstr "Exterior buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4613
msgid "Nothing selected for painting."
msgstr "Nothing selected for painting."

#: flatcamEditors/FlatCAMGeoEditor.py:4620
msgid "Invalid value for"
msgstr "Invalid value for"

#: flatcamEditors/FlatCAMGeoEditor.py:4626
#, python-format
msgid "Could not do Paint. Overlap value has to be less than 1.00 (100%%)."
msgstr "Could not do Paint. Overlap value has to be less than 1.00 (100%%)."

#: flatcamEditors/FlatCAMGeoEditor.py:4685
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"
msgstr ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"

#: flatcamEditors/FlatCAMGeoEditor.py:4699
msgid "Paint done."
msgstr "Paint done."

#: flatcamEditors/FlatCAMGrbEditor.py:209
msgid "To add an Pad first select a aperture in Aperture Table"
msgstr "To add an Pad first select a aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:216
#: flatcamEditors/FlatCAMGrbEditor.py:410
msgid "Aperture size is zero. It needs to be greater than zero."
msgstr "Aperture size is zero. It needs to be greater than zero."

#: flatcamEditors/FlatCAMGrbEditor.py:367
#: flatcamEditors/FlatCAMGrbEditor.py:675
msgid ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."

#: flatcamEditors/FlatCAMGrbEditor.py:380
msgid "Done. Adding Pad completed."
msgstr "Done. Adding Pad completed."

#: flatcamEditors/FlatCAMGrbEditor.py:402
msgid "To add an Pad Array first select a aperture in Aperture Table"
msgstr "To add an Pad Array first select a aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:480
msgid "Click on the Pad Circular Array Start position"
msgstr "Click on the Pad Circular Array Start position"

#: flatcamEditors/FlatCAMGrbEditor.py:701
msgid "Too many Pads for the selected spacing angle."
msgstr "Too many Pads for the selected spacing angle."

#: flatcamEditors/FlatCAMGrbEditor.py:724
msgid "Done. Pad Array added."
msgstr "Done. Pad Array added."

#: flatcamEditors/FlatCAMGrbEditor.py:745
msgid "Select shape(s) and then click ..."
msgstr "Select shape(s) and then click ..."

#: flatcamEditors/FlatCAMGrbEditor.py:757
msgid "Failed. Nothing selected."
msgstr "Failed. Nothing selected."

#: flatcamEditors/FlatCAMGrbEditor.py:773
msgid ""
"Failed. Poligonize works only on geometries belonging to the same aperture."
msgstr ""
"Failed. Poligonize works only on geometries belonging to the same aperture."

#: flatcamEditors/FlatCAMGrbEditor.py:827
msgid "Done. Poligonize completed."
msgstr "Done. Poligonize completed."

#: flatcamEditors/FlatCAMGrbEditor.py:880
#: flatcamEditors/FlatCAMGrbEditor.py:1103
#: flatcamEditors/FlatCAMGrbEditor.py:1127
msgid "Corner Mode 1: 45 degrees ..."
msgstr "Corner Mode 1: 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:882
msgid "Click on 1st point ..."
msgstr "Click on 1st point ..."

#: flatcamEditors/FlatCAMGrbEditor.py:892
#: flatcamEditors/FlatCAMGrbEditor.py:1203
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr "Click on next Point or click Right mouse button to complete ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1091
#: flatcamEditors/FlatCAMGrbEditor.py:1124
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr "Corner Mode 2: Reverse 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1094
#: flatcamEditors/FlatCAMGrbEditor.py:1121
msgid "Corner Mode 3: 90 degrees ..."
msgstr "Corner Mode 3: 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1097
#: flatcamEditors/FlatCAMGrbEditor.py:1118
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr "Corner Mode 4: Reverse 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1100
#: flatcamEditors/FlatCAMGrbEditor.py:1115
msgid "Corner Mode 5: Free angle ..."
msgstr "Corner Mode 5: Free angle ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1154
#: flatcamEditors/FlatCAMGrbEditor.py:1320
#: flatcamEditors/FlatCAMGrbEditor.py:1359
msgid "Track Mode 1: 45 degrees ..."
msgstr "Track Mode 1: 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1300
#: flatcamEditors/FlatCAMGrbEditor.py:1354
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr "Track Mode 2: Reverse 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1305
#: flatcamEditors/FlatCAMGrbEditor.py:1349
msgid "Track Mode 3: 90 degrees ..."
msgstr "Track Mode 3: 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1310
#: flatcamEditors/FlatCAMGrbEditor.py:1344
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr "Track Mode 4: Reverse 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1315
#: flatcamEditors/FlatCAMGrbEditor.py:1339
msgid "Track Mode 5: Free angle ..."
msgstr "Track Mode 5: Free angle ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1721
msgid "Scale the selected Gerber apertures ..."
msgstr "Scale the selected Gerber apertures ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1763
msgid "Buffer the selected apertures ..."
msgstr "Buffer the selected apertures ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1805
msgid "Mark polygon areas in the edited Gerber ..."
msgstr "Mark polygon areas in the edited Gerber ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1871
msgid "Nothing selected to move"
msgstr "Nothing selected to move"

#: flatcamEditors/FlatCAMGrbEditor.py:1995
msgid "Done. Apertures Move completed."
msgstr "Done. Apertures Move completed."

#: flatcamEditors/FlatCAMGrbEditor.py:2072
msgid "Done. Apertures copied."
msgstr "Done. Apertures copied."

#: flatcamEditors/FlatCAMGrbEditor.py:2374 flatcamGUI/FlatCAMGUI.py:1889
#: flatcamGUI/PreferencesUI.py:1659
msgid "Gerber Editor"
msgstr "Gerber Editor"

#: flatcamEditors/FlatCAMGrbEditor.py:2394 flatcamGUI/ObjectUI.py:203
#: flatcamTools/ToolProperties.py:142
msgid "Apertures"
msgstr "Apertures"

#: flatcamEditors/FlatCAMGrbEditor.py:2396 flatcamGUI/ObjectUI.py:205
msgid "Apertures Table for the Gerber Object."
msgstr "Apertures Table for the Gerber Object."

#: flatcamEditors/FlatCAMGrbEditor.py:2407
#: flatcamEditors/FlatCAMGrbEditor.py:3732 flatcamGUI/ObjectUI.py:238
msgid "Code"
msgstr "Code"

#: flatcamEditors/FlatCAMGrbEditor.py:2407
#: flatcamEditors/FlatCAMGrbEditor.py:3732 flatcamGUI/ObjectUI.py:238
#: flatcamGUI/ObjectUI.py:1097 flatcamGUI/ObjectUI.py:1709
msgid "Type"
msgstr "Type"

#: flatcamEditors/FlatCAMGrbEditor.py:2407
#: flatcamEditors/FlatCAMGrbEditor.py:3732 flatcamGUI/ObjectUI.py:238
msgid "Size"
msgstr "Size"

#: flatcamEditors/FlatCAMGrbEditor.py:2407
#: flatcamEditors/FlatCAMGrbEditor.py:3732 flatcamGUI/ObjectUI.py:238
msgid "Dim"
msgstr "Dim"

#: flatcamEditors/FlatCAMGrbEditor.py:2411 flatcamGUI/ObjectUI.py:242
msgid "Index"
msgstr "Index"

#: flatcamEditors/FlatCAMGrbEditor.py:2413
#: flatcamEditors/FlatCAMGrbEditor.py:2440 flatcamGUI/ObjectUI.py:244
msgid "Aperture Code"
msgstr "Aperture Code"

#: flatcamEditors/FlatCAMGrbEditor.py:2415 flatcamGUI/ObjectUI.py:246
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr "Type of aperture: circular, rectangle, macros etc"

#: flatcamEditors/FlatCAMGrbEditor.py:2417 flatcamGUI/ObjectUI.py:248
msgid "Aperture Size:"
msgstr "Aperture Size:"

#: flatcamEditors/FlatCAMGrbEditor.py:2419 flatcamGUI/ObjectUI.py:250
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"

#: flatcamEditors/FlatCAMGrbEditor.py:2441 flatcamGUI/PreferencesUI.py:1689
msgid "Code for the new aperture"
msgstr "Code for the new aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2448
msgid "Aperture Size"
msgstr "Aperture Size"

#: flatcamEditors/FlatCAMGrbEditor.py:2450
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"

#: flatcamEditors/FlatCAMGrbEditor.py:2462
msgid "Aperture Type"
msgstr "Aperture Type"

#: flatcamEditors/FlatCAMGrbEditor.py:2464
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"

#: flatcamEditors/FlatCAMGrbEditor.py:2475
msgid "Aperture Dim"
msgstr "Aperture Dim"

#: flatcamEditors/FlatCAMGrbEditor.py:2477
msgid ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"
msgstr ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"

#: flatcamEditors/FlatCAMGrbEditor.py:2486
msgid "Add/Delete Aperture"
msgstr "Add/Delete Aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2488
msgid "Add/Delete an aperture in the aperture table"
msgstr "Add/Delete an aperture in the aperture table"

#: flatcamEditors/FlatCAMGrbEditor.py:2497
msgid "Add a new aperture to the aperture list."
msgstr "Add a new aperture to the aperture list."

#: flatcamEditors/FlatCAMGrbEditor.py:2502
msgid "Delete a aperture in the aperture list"
msgstr "Delete a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2519
msgid "Buffer Aperture"
msgstr "Buffer Aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2521
msgid "Buffer a aperture in the aperture list"
msgstr "Buffer a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2531 flatcamGUI/PreferencesUI.py:1824
msgid "Buffer distance"
msgstr "Buffer distance"

#: flatcamEditors/FlatCAMGrbEditor.py:2532
msgid "Buffer corner"
msgstr "Buffer corner"

#: flatcamEditors/FlatCAMGrbEditor.py:2534
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: flatcamEditors/FlatCAMGrbEditor.py:2549 flatcamGUI/FlatCAMGUI.py:831
#: flatcamGUI/FlatCAMGUI.py:1823 flatcamGUI/FlatCAMGUI.py:1875
#: flatcamGUI/FlatCAMGUI.py:1902 flatcamGUI/FlatCAMGUI.py:2243
msgid "Buffer"
msgstr "Buffer"

#: flatcamEditors/FlatCAMGrbEditor.py:2564
msgid "Scale Aperture"
msgstr "Scale Aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2566
msgid "Scale a aperture in the aperture list"
msgstr "Scale a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2574 flatcamGUI/PreferencesUI.py:1840
msgid "Scale factor"
msgstr "Scale factor"

#: flatcamEditors/FlatCAMGrbEditor.py:2576
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2602
msgid "Mark polygons"
msgstr "Mark polygons"

#: flatcamEditors/FlatCAMGrbEditor.py:2604
msgid "Mark the polygon areas."
msgstr "Mark the polygon areas."

#: flatcamEditors/FlatCAMGrbEditor.py:2612
msgid "Area UPPER threshold"
msgstr "Area UPPER threshold"

#: flatcamEditors/FlatCAMGrbEditor.py:2614
msgid ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2621
msgid "Area LOWER threshold"
msgstr "Area LOWER threshold"

#: flatcamEditors/FlatCAMGrbEditor.py:2623
msgid ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2637
msgid "Mark"
msgstr "Mark"

#: flatcamEditors/FlatCAMGrbEditor.py:2639
msgid "Mark the polygons that fit within limits."
msgstr "Mark the polygons that fit within limits."

#: flatcamEditors/FlatCAMGrbEditor.py:2645
msgid "Delete all the marked polygons."
msgstr "Delete all the marked polygons."

#: flatcamEditors/FlatCAMGrbEditor.py:2649 flatcamGUI/PreferencesUI.py:683
msgid "Clear"
msgstr "Clear"

#: flatcamEditors/FlatCAMGrbEditor.py:2651
msgid "Clear all the markings."
msgstr "Clear all the markings."

#: flatcamEditors/FlatCAMGrbEditor.py:2671 flatcamGUI/FlatCAMGUI.py:821
#: flatcamGUI/FlatCAMGUI.py:1823 flatcamGUI/FlatCAMGUI.py:2233
msgid "Add Pad Array"
msgstr "Add Pad Array"

#: flatcamEditors/FlatCAMGrbEditor.py:2673
msgid "Add an array of pads (linear or circular array)"
msgstr "Add an array of pads (linear or circular array)"

#: flatcamEditors/FlatCAMGrbEditor.py:2679
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMGrbEditor.py:2690 flatcamGUI/PreferencesUI.py:1726
msgid "Nr of pads"
msgstr "Nr of pads"

#: flatcamEditors/FlatCAMGrbEditor.py:2692 flatcamGUI/PreferencesUI.py:1728
msgid "Specify how many pads to be in the array."
msgstr "Specify how many pads to be in the array."

#: flatcamEditors/FlatCAMGrbEditor.py:3214
#: flatcamEditors/FlatCAMGrbEditor.py:3218
msgid "Aperture code value is missing or wrong format. Add it and retry."
msgstr "Aperture code value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3254
msgid ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."
msgstr ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3267
msgid "Aperture size value is missing or wrong format. Add it and retry."
msgstr "Aperture size value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3278
msgid "Aperture already in the aperture table."
msgstr "Aperture already in the aperture table."

#: flatcamEditors/FlatCAMGrbEditor.py:3286
msgid "Added new aperture with code"
msgstr "Added new aperture with code"

#: flatcamEditors/FlatCAMGrbEditor.py:3315
msgid " Select an aperture in Aperture Table"
msgstr " Select an aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:3322
msgid "Select an aperture in Aperture Table -->"
msgstr "Select an aperture in Aperture Table -->"

#: flatcamEditors/FlatCAMGrbEditor.py:3346
msgid "Deleted aperture with code"
msgstr "Deleted aperture with code"

#: flatcamEditors/FlatCAMGrbEditor.py:3858
msgid "Adding geometry for aperture"
msgstr "Adding geometry for aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:4041
msgid ""
"There are no Aperture definitions in the file. Aborting Gerber creation."
msgstr ""
"There are no Aperture definitions in the file. Aborting Gerber creation."

#: flatcamEditors/FlatCAMGrbEditor.py:4051
msgid "Creating Gerber."
msgstr "Creating Gerber."

#: flatcamEditors/FlatCAMGrbEditor.py:4060
msgid "Done. Gerber editing finished."
msgstr "Done. Gerber editing finished."

#: flatcamEditors/FlatCAMGrbEditor.py:4077
msgid "Cancelled. No aperture is selected"
msgstr "Cancelled. No aperture is selected"

#: flatcamEditors/FlatCAMGrbEditor.py:4629
msgid "Failed. No aperture geometry is selected."
msgstr "Failed. No aperture geometry is selected."

#: flatcamEditors/FlatCAMGrbEditor.py:4638
#: flatcamEditors/FlatCAMGrbEditor.py:4910
msgid "Done. Apertures geometry deleted."
msgstr "Done. Apertures geometry deleted."

#: flatcamEditors/FlatCAMGrbEditor.py:4781
msgid "No aperture to buffer. Select at least one aperture and try again."
msgstr "No aperture to buffer. Select at least one aperture and try again."

#: flatcamEditors/FlatCAMGrbEditor.py:4794
msgid "Failed."
msgstr "Failed."

#: flatcamEditors/FlatCAMGrbEditor.py:4813
msgid "Scale factor value is missing or wrong format. Add it and retry."
msgstr "Scale factor value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:4845
msgid "No aperture to scale. Select at least one aperture and try again."
msgstr "No aperture to scale. Select at least one aperture and try again."

#: flatcamEditors/FlatCAMGrbEditor.py:4861
msgid "Done. Scale Tool completed."
msgstr "Done. Scale Tool completed."

#: flatcamEditors/FlatCAMGrbEditor.py:4899
msgid "Polygons marked."
msgstr "Polygons marked."

#: flatcamEditors/FlatCAMGrbEditor.py:4902
msgid "No polygons were marked. None fit within the limits."
msgstr "No polygons were marked. None fit within the limits."

#: flatcamEditors/FlatCAMGrbEditor.py:5681
msgid "Rotation action was not executed."
msgstr "Rotation action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5820
msgid "Skew action was not executed."
msgstr "Skew action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5890
msgid "Scale action was not executed."
msgstr "Scale action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5939
msgid "Offset action was not executed."
msgstr "Offset action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5995
msgid "Geometry shape offset Y cancelled"
msgstr "Geometry shape offset Y cancelled"

#: flatcamEditors/FlatCAMGrbEditor.py:6012
msgid "Geometry shape skew X cancelled"
msgstr "Geometry shape skew X cancelled"

#: flatcamEditors/FlatCAMGrbEditor.py:6029
msgid "Geometry shape skew Y cancelled"
msgstr "Geometry shape skew Y cancelled"

#: flatcamEditors/FlatCAMTextEditor.py:54
msgid "Print Preview"
msgstr "Print Preview"

#: flatcamEditors/FlatCAMTextEditor.py:55
msgid "Open a OS standard Preview Print window."
msgstr "Open a OS standard Preview Print window."

#: flatcamEditors/FlatCAMTextEditor.py:58
msgid "Print Code"
msgstr "Print Code"

#: flatcamEditors/FlatCAMTextEditor.py:59
msgid "Open a OS standard Print window."
msgstr "Open a OS standard Print window."

#: flatcamEditors/FlatCAMTextEditor.py:61
msgid "Find in Code"
msgstr "Find in Code"

#: flatcamEditors/FlatCAMTextEditor.py:62
msgid "Will search and highlight in yellow the string in the Find box."
msgstr "Will search and highlight in yellow the string in the Find box."

#: flatcamEditors/FlatCAMTextEditor.py:66
msgid "Find box. Enter here the strings to be searched in the text."
msgstr "Find box. Enter here the strings to be searched in the text."

#: flatcamEditors/FlatCAMTextEditor.py:68
msgid "Replace With"
msgstr "Replace With"

#: flatcamEditors/FlatCAMTextEditor.py:69
msgid ""
"Will replace the string from the Find box with the one in the Replace box."
msgstr ""
"Will replace the string from the Find box with the one in the Replace box."

#: flatcamEditors/FlatCAMTextEditor.py:73
msgid "String to replace the one in the Find box throughout the text."
msgstr "String to replace the one in the Find box throughout the text."

#: flatcamEditors/FlatCAMTextEditor.py:75 flatcamGUI/ObjectUI.py:1602
#: flatcamGUI/PreferencesUI.py:3390 flatcamGUI/PreferencesUI.py:4273
msgid "All"
msgstr "All"

#: flatcamEditors/FlatCAMTextEditor.py:76
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."

#: flatcamEditors/FlatCAMTextEditor.py:79
msgid "Copy All"
msgstr "Copy All"

#: flatcamEditors/FlatCAMTextEditor.py:80
msgid "Will copy all the text in the Code Editor to the clipboard."
msgstr "Will copy all the text in the Code Editor to the clipboard."

#: flatcamEditors/FlatCAMTextEditor.py:83
msgid "Open Code"
msgstr "Open Code"

#: flatcamEditors/FlatCAMTextEditor.py:84
msgid "Will open a text file in the editor."
msgstr "Will open a text file in the editor."

#: flatcamEditors/FlatCAMTextEditor.py:86
msgid "Save Code"
msgstr "Save Code"

#: flatcamEditors/FlatCAMTextEditor.py:87
msgid "Will save the text in the editor into a file."
msgstr "Will save the text in the editor into a file."

#: flatcamEditors/FlatCAMTextEditor.py:89
msgid "Run Code"
msgstr "Run Code"

#: flatcamEditors/FlatCAMTextEditor.py:90
msgid "Will run the TCL commands found in the text file, one by one."
msgstr "Will run the TCL commands found in the text file, one by one."

#: flatcamEditors/FlatCAMTextEditor.py:165
msgid "Open file"
msgstr "Open file"

#: flatcamEditors/FlatCAMTextEditor.py:196
#: flatcamEditors/FlatCAMTextEditor.py:201
msgid "Export G-Code ..."
msgstr "Export G-Code ..."

#: flatcamEditors/FlatCAMTextEditor.py:204
msgid "Export Code cancelled."
msgstr "Export Code cancelled."

#: flatcamEditors/FlatCAMTextEditor.py:271
msgid "Code Editor content copied to clipboard ..."
msgstr "Code Editor content copied to clipboard ..."

#: flatcamGUI/FlatCAMGUI.py:50 flatcamGUI/FlatCAMGUI.py:52
#: flatcamGUI/FlatCAMGUI.py:1846
msgid "Toggle Panel"
msgstr "Toggle Panel"

#: flatcamGUI/FlatCAMGUI.py:62
msgid "File"
msgstr "File"

#: flatcamGUI/FlatCAMGUI.py:67
msgid "&New Project ...\tCTRL+N"
msgstr "&New Project ...\tCTRL+N"

#: flatcamGUI/FlatCAMGUI.py:69
msgid "Will create a new, blank project"
msgstr "Will create a new, blank project"

#: flatcamGUI/FlatCAMGUI.py:74
msgid "&New"
msgstr "&New"

#: flatcamGUI/FlatCAMGUI.py:77
msgid "Geometry\tN"
msgstr "Geometry\tN"

#: flatcamGUI/FlatCAMGUI.py:79
msgid "Will create a new, empty Geometry Object."
msgstr "Will create a new, empty Geometry Object."

#: flatcamGUI/FlatCAMGUI.py:81
msgid "Gerber\tB"
msgstr "Gerber\tB"

#: flatcamGUI/FlatCAMGUI.py:83
msgid "Will create a new, empty Gerber Object."
msgstr "Will create a new, empty Gerber Object."

#: flatcamGUI/FlatCAMGUI.py:85
msgid "Excellon\tL"
msgstr "Excellon\tL"

#: flatcamGUI/FlatCAMGUI.py:87
msgid "Will create a new, empty Excellon Object."
msgstr "Will create a new, empty Excellon Object."

#: flatcamGUI/FlatCAMGUI.py:91
msgid "Document\tD"
msgstr "Document\tD"

#: flatcamGUI/FlatCAMGUI.py:93
msgid "Will create a new, empty Document Object."
msgstr "Will create a new, empty Document Object."

#: flatcamGUI/FlatCAMGUI.py:96 flatcamGUI/FlatCAMGUI.py:3671
#: flatcamTools/ToolPcbWizard.py:61 flatcamTools/ToolPcbWizard.py:68
msgid "Open"
msgstr "Open"

#: flatcamGUI/FlatCAMGUI.py:100
msgid "Open &Project ..."
msgstr "Open &Project ..."

#: flatcamGUI/FlatCAMGUI.py:106 flatcamGUI/FlatCAMGUI.py:3680
msgid "Open &Gerber ...\tCTRL+G"
msgstr "Open &Gerber ...\tCTRL+G"

#: flatcamGUI/FlatCAMGUI.py:111 flatcamGUI/FlatCAMGUI.py:3685
msgid "Open &Excellon ...\tCTRL+E"
msgstr "Open &Excellon ...\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:115 flatcamGUI/FlatCAMGUI.py:3689
msgid "Open G-&Code ..."
msgstr "Open G-&Code ..."

#: flatcamGUI/FlatCAMGUI.py:121
msgid "Open Config ..."
msgstr "Open Config ..."

#: flatcamGUI/FlatCAMGUI.py:125
msgid "Recent projects"
msgstr "Recent projects"

#: flatcamGUI/FlatCAMGUI.py:126
msgid "Recent files"
msgstr "Recent files"

#: flatcamGUI/FlatCAMGUI.py:132
msgid "Scripting"
msgstr "Scripting"

#: flatcamGUI/FlatCAMGUI.py:135 flatcamGUI/FlatCAMGUI.py:734
#: flatcamGUI/FlatCAMGUI.py:2152
msgid "New Script ..."
msgstr "New Script ..."

#: flatcamGUI/FlatCAMGUI.py:136 flatcamGUI/FlatCAMGUI.py:735
#: flatcamGUI/FlatCAMGUI.py:2153
msgid "Open Script ..."
msgstr "Open Script ..."

#: flatcamGUI/FlatCAMGUI.py:138 flatcamGUI/FlatCAMGUI.py:736
#: flatcamGUI/FlatCAMGUI.py:2154 flatcamGUI/FlatCAMGUI.py:3660
msgid "Run Script ..."
msgstr "Run Script ..."

#: flatcamGUI/FlatCAMGUI.py:140 flatcamGUI/FlatCAMGUI.py:3662
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:153
msgid "Import"
msgstr "Import"

#: flatcamGUI/FlatCAMGUI.py:155
msgid "&SVG as Geometry Object ..."
msgstr "&SVG as Geometry Object ..."

#: flatcamGUI/FlatCAMGUI.py:158
msgid "&SVG as Gerber Object ..."
msgstr "&SVG as Gerber Object ..."

#: flatcamGUI/FlatCAMGUI.py:163
msgid "&DXF as Geometry Object ..."
msgstr "&DXF as Geometry Object ..."

#: flatcamGUI/FlatCAMGUI.py:166
msgid "&DXF as Gerber Object ..."
msgstr "&DXF as Gerber Object ..."

#: flatcamGUI/FlatCAMGUI.py:171
msgid "Export"
msgstr "Export"

#: flatcamGUI/FlatCAMGUI.py:174
msgid "Export &SVG ..."
msgstr "Export &SVG ..."

#: flatcamGUI/FlatCAMGUI.py:177
msgid "Export DXF ..."
msgstr "Export DXF ..."

#: flatcamGUI/FlatCAMGUI.py:182
msgid "Export &PNG ..."
msgstr "Export &PNG ..."

#: flatcamGUI/FlatCAMGUI.py:184
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."

#: flatcamGUI/FlatCAMGUI.py:193
msgid "Export &Excellon ..."
msgstr "Export &Excellon ..."

#: flatcamGUI/FlatCAMGUI.py:195
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."

#: flatcamGUI/FlatCAMGUI.py:202
msgid "Export &Gerber ..."
msgstr "Export &Gerber ..."

#: flatcamGUI/FlatCAMGUI.py:204
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."

#: flatcamGUI/FlatCAMGUI.py:220
msgid "Backup"
msgstr "Backup"

#: flatcamGUI/FlatCAMGUI.py:224
msgid "Import Preferences from file ..."
msgstr "Import Preferences from file ..."

#: flatcamGUI/FlatCAMGUI.py:229
msgid "Export Preferences to file ..."
msgstr "Export Preferences to file ..."

#: flatcamGUI/FlatCAMGUI.py:235 flatcamGUI/FlatCAMGUI.py:607
msgid "Save"
msgstr "Save"

#: flatcamGUI/FlatCAMGUI.py:238
msgid "&Save Project ..."
msgstr "&Save Project ..."

#: flatcamGUI/FlatCAMGUI.py:243
msgid "Save Project &As ...\tCTRL+S"
msgstr "Save Project &As ...\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:248
msgid "Save Project C&opy ..."
msgstr "Save Project C&opy ..."

#: flatcamGUI/FlatCAMGUI.py:255
msgid "E&xit"
msgstr "E&xit"

#: flatcamGUI/FlatCAMGUI.py:263 flatcamGUI/FlatCAMGUI.py:604
#: flatcamGUI/FlatCAMGUI.py:1923
msgid "Edit"
msgstr "Edit"

#: flatcamGUI/FlatCAMGUI.py:266
msgid "Edit Object\tE"
msgstr "Edit Object\tE"

#: flatcamGUI/FlatCAMGUI.py:267
msgid "Close Editor\tCTRL+S"
msgstr "Close Editor\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:275
msgid "Conversion"
msgstr "Conversion"

#: flatcamGUI/FlatCAMGUI.py:277
msgid "&Join Geo/Gerber/Exc -> Geo"
msgstr "&Join Geo/Gerber/Exc -> Geo"

#: flatcamGUI/FlatCAMGUI.py:279
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."

#: flatcamGUI/FlatCAMGUI.py:286
msgid "Join Excellon(s) -> Excellon"
msgstr "Join Excellon(s) -> Excellon"

#: flatcamGUI/FlatCAMGUI.py:288
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""
"Merge a selection of Excellon objects into a new combo Excellon object."

#: flatcamGUI/FlatCAMGUI.py:291
msgid "Join Gerber(s) -> Gerber"
msgstr "Join Gerber(s) -> Gerber"

#: flatcamGUI/FlatCAMGUI.py:293
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr "Merge a selection of Gerber objects into a new combo Gerber object."

#: flatcamGUI/FlatCAMGUI.py:298
msgid "Convert Single to MultiGeo"
msgstr "Convert Single to MultiGeo"

#: flatcamGUI/FlatCAMGUI.py:300
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."

#: flatcamGUI/FlatCAMGUI.py:304
msgid "Convert Multi to SingleGeo"
msgstr "Convert Multi to SingleGeo"

#: flatcamGUI/FlatCAMGUI.py:306
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."

#: flatcamGUI/FlatCAMGUI.py:312
msgid "Convert Any to Geo"
msgstr "Convert Any to Geo"

#: flatcamGUI/FlatCAMGUI.py:314
msgid "Convert Any to Gerber"
msgstr "Convert Any to Gerber"

#: flatcamGUI/FlatCAMGUI.py:319
msgid "&Copy\tCTRL+C"
msgstr "&Copy\tCTRL+C"

#: flatcamGUI/FlatCAMGUI.py:323
msgid "&Delete\tDEL"
msgstr "&Delete\tDEL"

#: flatcamGUI/FlatCAMGUI.py:327
msgid "Se&t Origin\tO"
msgstr "Se&t Origin\tO"

#: flatcamGUI/FlatCAMGUI.py:328
msgid "Jump to Location\tJ"
msgstr "Jump to Location\tJ"

#: flatcamGUI/FlatCAMGUI.py:333
msgid "Toggle Units\tQ"
msgstr "Toggle Units\tQ"

#: flatcamGUI/FlatCAMGUI.py:334
msgid "&Select All\tCTRL+A"
msgstr "&Select All\tCTRL+A"

#: flatcamGUI/FlatCAMGUI.py:338
msgid "&Preferences\tSHIFT+P"
msgstr "&Preferences\tSHIFT+P"

#: flatcamGUI/FlatCAMGUI.py:341 flatcamTools/ToolProperties.py:140
msgid "Options"
msgstr "Options"

#: flatcamGUI/FlatCAMGUI.py:356
msgid "&Rotate Selection\tSHIFT+(R)"
msgstr "&Rotate Selection\tSHIFT+(R)"

#: flatcamGUI/FlatCAMGUI.py:361
msgid "&Skew on X axis\tSHIFT+X"
msgstr "&Skew on X axis\tSHIFT+X"

#: flatcamGUI/FlatCAMGUI.py:363
msgid "S&kew on Y axis\tSHIFT+Y"
msgstr "S&kew on Y axis\tSHIFT+Y"

#: flatcamGUI/FlatCAMGUI.py:368
msgid "Flip on &X axis\tX"
msgstr "Flip on &X axis\tX"

#: flatcamGUI/FlatCAMGUI.py:370
msgid "Flip on &Y axis\tY"
msgstr "Flip on &Y axis\tY"

#: flatcamGUI/FlatCAMGUI.py:375
msgid "View source\tALT+S"
msgstr "View source\tALT+S"

#: flatcamGUI/FlatCAMGUI.py:382
msgid "&View"
msgstr "&View"

#: flatcamGUI/FlatCAMGUI.py:383
msgid "Enable all plots\tALT+1"
msgstr "Enable all plots\tALT+1"

#: flatcamGUI/FlatCAMGUI.py:385
msgid "Disable all plots\tALT+2"
msgstr "Disable all plots\tALT+2"

#: flatcamGUI/FlatCAMGUI.py:387
msgid "Disable non-selected\tALT+3"
msgstr "Disable non-selected\tALT+3"

#: flatcamGUI/FlatCAMGUI.py:390
msgid "&Zoom Fit\tV"
msgstr "&Zoom Fit\tV"

#: flatcamGUI/FlatCAMGUI.py:391
msgid "&Zoom In\t="
msgstr "&Zoom In\t="

#: flatcamGUI/FlatCAMGUI.py:392
msgid "&Zoom Out\t-"
msgstr "&Zoom Out\t-"

#: flatcamGUI/FlatCAMGUI.py:396
msgid "Redraw All\tF5"
msgstr "Redraw All\tF5"

#: flatcamGUI/FlatCAMGUI.py:400
msgid "Toggle Code Editor\tSHIFT+E"
msgstr "Toggle Code Editor\tSHIFT+E"

#: flatcamGUI/FlatCAMGUI.py:403
msgid "&Toggle FullScreen\tALT+F10"
msgstr "&Toggle FullScreen\tALT+F10"

#: flatcamGUI/FlatCAMGUI.py:405
msgid "&Toggle Plot Area\tCTRL+F10"
msgstr "&Toggle Plot Area\tCTRL+F10"

#: flatcamGUI/FlatCAMGUI.py:407
msgid "&Toggle Project/Sel/Tool\t`"
msgstr "&Toggle Project/Sel/Tool\t`"

#: flatcamGUI/FlatCAMGUI.py:411
msgid "&Toggle Grid Snap\tG"
msgstr "&Toggle Grid Snap\tG"

#: flatcamGUI/FlatCAMGUI.py:413
msgid "&Toggle Grid Lines\tALT+G"
msgstr "&Toggle Grid Lines\tALT+G"

#: flatcamGUI/FlatCAMGUI.py:414
msgid "&Toggle Axis\tSHIFT+G"
msgstr "&Toggle Axis\tSHIFT+G"

#: flatcamGUI/FlatCAMGUI.py:417
msgid "Toggle Workspace\tSHIFT+W"
msgstr "Toggle Workspace\tSHIFT+W"

#: flatcamGUI/FlatCAMGUI.py:422
msgid "Objects"
msgstr "Objects"

#: flatcamGUI/FlatCAMGUI.py:433
msgid "&Tool"
msgstr "&Tool"

#: flatcamGUI/FlatCAMGUI.py:435
msgid "&Command Line\tS"
msgstr "&Command Line\tS"

#: flatcamGUI/FlatCAMGUI.py:440
msgid "Help"
msgstr "Help"

#: flatcamGUI/FlatCAMGUI.py:441
msgid "Online Help\tF1"
msgstr "Online Help\tF1"

#: flatcamGUI/FlatCAMGUI.py:443 flatcamGUI/FlatCAMGUI.py:3975
msgid "Bookmarks"
msgstr "Bookmarks"

#: flatcamGUI/FlatCAMGUI.py:449
msgid "Report a bug"
msgstr "Report a bug"

#: flatcamGUI/FlatCAMGUI.py:452
msgid "Excellon Specification"
msgstr "Excellon Specification"

#: flatcamGUI/FlatCAMGUI.py:454
msgid "Gerber Specification"
msgstr "Gerber Specification"

#: flatcamGUI/FlatCAMGUI.py:459
msgid "Shortcuts List\tF3"
msgstr "Shortcuts List\tF3"

#: flatcamGUI/FlatCAMGUI.py:460
msgid "YouTube Channel\tF4"
msgstr "YouTube Channel\tF4"

#: flatcamGUI/FlatCAMGUI.py:471
msgid "Add Circle\tO"
msgstr "Add Circle\tO"

#: flatcamGUI/FlatCAMGUI.py:473
msgid "Add Arc\tA"
msgstr "Add Arc\tA"

#: flatcamGUI/FlatCAMGUI.py:476
msgid "Add Rectangle\tR"
msgstr "Add Rectangle\tR"

#: flatcamGUI/FlatCAMGUI.py:479
msgid "Add Polygon\tN"
msgstr "Add Polygon\tN"

#: flatcamGUI/FlatCAMGUI.py:481
msgid "Add Path\tP"
msgstr "Add Path\tP"

#: flatcamGUI/FlatCAMGUI.py:483
msgid "Add Text\tT"
msgstr "Add Text\tT"

#: flatcamGUI/FlatCAMGUI.py:486
msgid "Polygon Union\tU"
msgstr "Polygon Union\tU"

#: flatcamGUI/FlatCAMGUI.py:488
msgid "Polygon Intersection\tE"
msgstr "Polygon Intersection\tE"

#: flatcamGUI/FlatCAMGUI.py:490
msgid "Polygon Subtraction\tS"
msgstr "Polygon Subtraction\tS"

#: flatcamGUI/FlatCAMGUI.py:494
msgid "Cut Path\tX"
msgstr "Cut Path\tX"

#: flatcamGUI/FlatCAMGUI.py:496
msgid "Copy Geom\tC"
msgstr "Copy Geom\tC"

#: flatcamGUI/FlatCAMGUI.py:498
msgid "Delete Shape\tDEL"
msgstr "Delete Shape\tDEL"

#: flatcamGUI/FlatCAMGUI.py:501 flatcamGUI/FlatCAMGUI.py:583
msgid "Move\tM"
msgstr "Move\tM"

#: flatcamGUI/FlatCAMGUI.py:503
msgid "Buffer Tool\tB"
msgstr "Buffer Tool\tB"

#: flatcamGUI/FlatCAMGUI.py:506
msgid "Paint Tool\tI"
msgstr "Paint Tool\tI"

#: flatcamGUI/FlatCAMGUI.py:509
msgid "Transform Tool\tALT+R"
msgstr "Transform Tool\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:513
msgid "Toggle Corner Snap\tK"
msgstr "Toggle Corner Snap\tK"

#: flatcamGUI/FlatCAMGUI.py:519
msgid ">Excellon Editor<"
msgstr ">Excellon Editor<"

#: flatcamGUI/FlatCAMGUI.py:523
msgid "Add Drill Array\tA"
msgstr "Add Drill Array\tA"

#: flatcamGUI/FlatCAMGUI.py:525
msgid "Add Drill\tD"
msgstr "Add Drill\tD"

#: flatcamGUI/FlatCAMGUI.py:529
msgid "Add Slot Array\tQ"
msgstr "Add Slot Array\tQ"

#: flatcamGUI/FlatCAMGUI.py:531
msgid "Add Slot\tW"
msgstr "Add Slot\tW"

#: flatcamGUI/FlatCAMGUI.py:535
msgid "Resize Drill(S)\tR"
msgstr "Resize Drill(S)\tR"

#: flatcamGUI/FlatCAMGUI.py:537 flatcamGUI/FlatCAMGUI.py:578
msgid "Copy\tC"
msgstr "Copy\tC"

#: flatcamGUI/FlatCAMGUI.py:539 flatcamGUI/FlatCAMGUI.py:580
msgid "Delete\tDEL"
msgstr "Delete\tDEL"

#: flatcamGUI/FlatCAMGUI.py:544
msgid "Move Drill(s)\tM"
msgstr "Move Drill(s)\tM"

#: flatcamGUI/FlatCAMGUI.py:549
msgid ">Gerber Editor<"
msgstr ">Gerber Editor<"

#: flatcamGUI/FlatCAMGUI.py:553
msgid "Add Pad\tP"
msgstr "Add Pad\tP"

#: flatcamGUI/FlatCAMGUI.py:555
msgid "Add Pad Array\tA"
msgstr "Add Pad Array\tA"

#: flatcamGUI/FlatCAMGUI.py:557
msgid "Add Track\tT"
msgstr "Add Track\tT"

#: flatcamGUI/FlatCAMGUI.py:559
msgid "Add Region\tN"
msgstr "Add Region\tN"

#: flatcamGUI/FlatCAMGUI.py:563
msgid "Poligonize\tALT+N"
msgstr "Poligonize\tALT+N"

#: flatcamGUI/FlatCAMGUI.py:565
msgid "Add SemiDisc\tE"
msgstr "Add SemiDisc\tE"

#: flatcamGUI/FlatCAMGUI.py:566
msgid "Add Disc\tD"
msgstr "Add Disc\tD"

#: flatcamGUI/FlatCAMGUI.py:568
msgid "Buffer\tB"
msgstr "Buffer\tB"

#: flatcamGUI/FlatCAMGUI.py:569
msgid "Scale\tS"
msgstr "Scale\tS"

#: flatcamGUI/FlatCAMGUI.py:571
msgid "Mark Area\tALT+A"
msgstr "Mark Area\tALT+A"

#: flatcamGUI/FlatCAMGUI.py:573
msgid "Eraser\tCTRL+E"
msgstr "Eraser\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:575
msgid "Transform\tALT+R"
msgstr "Transform\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:598
msgid "Enable Plot"
msgstr "Enable Plot"

#: flatcamGUI/FlatCAMGUI.py:599
msgid "Disable Plot"
msgstr "Disable Plot"

#: flatcamGUI/FlatCAMGUI.py:601
msgid "Generate CNC"
msgstr "Generate CNC"

#: flatcamGUI/FlatCAMGUI.py:602
msgid "View Source"
msgstr "View Source"

#: flatcamGUI/FlatCAMGUI.py:610 flatcamGUI/FlatCAMGUI.py:1929
#: flatcamTools/ToolProperties.py:29
msgid "Properties"
msgstr "Properties"

#: flatcamGUI/FlatCAMGUI.py:639
msgid "File Toolbar"
msgstr "File Toolbar"

#: flatcamGUI/FlatCAMGUI.py:643
msgid "Edit Toolbar"
msgstr "Edit Toolbar"

#: flatcamGUI/FlatCAMGUI.py:647
msgid "View Toolbar"
msgstr "View Toolbar"

#: flatcamGUI/FlatCAMGUI.py:651
msgid "Shell Toolbar"
msgstr "Shell Toolbar"

#: flatcamGUI/FlatCAMGUI.py:655
msgid "Tools Toolbar"
msgstr "Tools Toolbar"

#: flatcamGUI/FlatCAMGUI.py:659
msgid "Excellon Editor Toolbar"
msgstr "Excellon Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:665
msgid "Geometry Editor Toolbar"
msgstr "Geometry Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:669
msgid "Gerber Editor Toolbar"
msgstr "Gerber Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:673
msgid "Grid Toolbar"
msgstr "Grid Toolbar"

#: flatcamGUI/FlatCAMGUI.py:694 flatcamGUI/FlatCAMGUI.py:2118
msgid "Open project"
msgstr "Open project"

#: flatcamGUI/FlatCAMGUI.py:695 flatcamGUI/FlatCAMGUI.py:2119
msgid "Save project"
msgstr "Save project"

#: flatcamGUI/FlatCAMGUI.py:700 flatcamGUI/FlatCAMGUI.py:2122
msgid "New Blank Geometry"
msgstr "New Blank Geometry"

#: flatcamGUI/FlatCAMGUI.py:701 flatcamGUI/FlatCAMGUI.py:2123
msgid "New Blank Gerber"
msgstr "New Blank Gerber"

#: flatcamGUI/FlatCAMGUI.py:702 flatcamGUI/FlatCAMGUI.py:2124
msgid "New Blank Excellon"
msgstr "New Blank Excellon"

#: flatcamGUI/FlatCAMGUI.py:706 flatcamGUI/FlatCAMGUI.py:2128
msgid "Save Object and close the Editor"
msgstr "Save Object and close the Editor"

#: flatcamGUI/FlatCAMGUI.py:711 flatcamGUI/FlatCAMGUI.py:2133
msgid "&Delete"
msgstr "&Delete"

#: flatcamGUI/FlatCAMGUI.py:713 flatcamGUI/FlatCAMGUI.py:1432
#: flatcamGUI/FlatCAMGUI.py:1620 flatcamGUI/FlatCAMGUI.py:2135
#: flatcamTools/ToolDistance.py:30 flatcamTools/ToolDistance.py:160
msgid "Distance Tool"
msgstr "Distance Tool"

#: flatcamGUI/FlatCAMGUI.py:715 flatcamGUI/FlatCAMGUI.py:2137
msgid "Distance Min Tool"
msgstr "Distance Min Tool"

#: flatcamGUI/FlatCAMGUI.py:716 flatcamGUI/FlatCAMGUI.py:1428
#: flatcamGUI/FlatCAMGUI.py:2138
msgid "Set Origin"
msgstr "Set Origin"

#: flatcamGUI/FlatCAMGUI.py:717 flatcamGUI/FlatCAMGUI.py:2139
msgid "Jump to Location"
msgstr "Jump to Location"

#: flatcamGUI/FlatCAMGUI.py:722 flatcamGUI/FlatCAMGUI.py:2142
msgid "&Replot"
msgstr "&Replot"

#: flatcamGUI/FlatCAMGUI.py:723 flatcamGUI/FlatCAMGUI.py:2143
msgid "&Clear plot"
msgstr "&Clear plot"

#: flatcamGUI/FlatCAMGUI.py:724 flatcamGUI/FlatCAMGUI.py:1431
#: flatcamGUI/FlatCAMGUI.py:2144
msgid "Zoom In"
msgstr "Zoom In"

#: flatcamGUI/FlatCAMGUI.py:725 flatcamGUI/FlatCAMGUI.py:1431
#: flatcamGUI/FlatCAMGUI.py:2145
msgid "Zoom Out"
msgstr "Zoom Out"

#: flatcamGUI/FlatCAMGUI.py:726 flatcamGUI/FlatCAMGUI.py:1430
#: flatcamGUI/FlatCAMGUI.py:1860 flatcamGUI/FlatCAMGUI.py:2146
msgid "Zoom Fit"
msgstr "Zoom Fit"

#: flatcamGUI/FlatCAMGUI.py:733 flatcamGUI/FlatCAMGUI.py:2151
msgid "&Command Line"
msgstr "&Command Line"

#: flatcamGUI/FlatCAMGUI.py:741 flatcamGUI/FlatCAMGUI.py:2157
msgid "2Sided Tool"
msgstr "2Sided Tool"

#: flatcamGUI/FlatCAMGUI.py:742 flatcamGUI/ObjectUI.py:551
#: flatcamTools/ToolCutOut.py:373
msgid "Cutout Tool"
msgstr "Cutout Tool"

#: flatcamGUI/FlatCAMGUI.py:743 flatcamGUI/FlatCAMGUI.py:2159
#: flatcamGUI/ObjectUI.py:535 flatcamTools/ToolNonCopperClear.py:605
msgid "NCC Tool"
msgstr "NCC Tool"

#: flatcamGUI/FlatCAMGUI.py:747 flatcamGUI/FlatCAMGUI.py:2163
msgid "Panel Tool"
msgstr "Panel Tool"

#: flatcamGUI/FlatCAMGUI.py:748 flatcamGUI/FlatCAMGUI.py:2164
#: flatcamTools/ToolFilm.py:421
msgid "Film Tool"
msgstr "Film Tool"

#: flatcamGUI/FlatCAMGUI.py:749 flatcamGUI/FlatCAMGUI.py:2166
#: flatcamTools/ToolSolderPaste.py:457
msgid "SolderPaste Tool"
msgstr "SolderPaste Tool"

#: flatcamGUI/FlatCAMGUI.py:750 flatcamGUI/FlatCAMGUI.py:2167
#: flatcamTools/ToolSub.py:35
msgid "Subtract Tool"
msgstr "Subtract Tool"

#: flatcamGUI/FlatCAMGUI.py:751 flatcamTools/ToolRulesCheck.py:587
msgid "Rules Tool"
msgstr "Rules Tool"

#: flatcamGUI/FlatCAMGUI.py:752 flatcamGUI/FlatCAMGUI.py:1438
#: flatcamTools/ToolOptimal.py:34 flatcamTools/ToolOptimal.py:278
msgid "Optimal Tool"
msgstr "Optimal Tool"

#: flatcamGUI/FlatCAMGUI.py:756 flatcamGUI/FlatCAMGUI.py:1436
#: flatcamGUI/FlatCAMGUI.py:2172
msgid "Calculators Tool"
msgstr "Calculators Tool"

#: flatcamGUI/FlatCAMGUI.py:762 flatcamGUI/FlatCAMGUI.py:781
#: flatcamGUI/FlatCAMGUI.py:819 flatcamGUI/FlatCAMGUI.py:2176
#: flatcamGUI/FlatCAMGUI.py:2231
msgid "Select"
msgstr "Select"

#: flatcamGUI/FlatCAMGUI.py:763 flatcamGUI/FlatCAMGUI.py:2177
msgid "Add Drill Hole"
msgstr "Add Drill Hole"

#: flatcamGUI/FlatCAMGUI.py:765 flatcamGUI/FlatCAMGUI.py:2179
msgid "Add Drill Hole Array"
msgstr "Add Drill Hole Array"

#: flatcamGUI/FlatCAMGUI.py:766 flatcamGUI/FlatCAMGUI.py:1705
#: flatcamGUI/FlatCAMGUI.py:1915 flatcamGUI/FlatCAMGUI.py:2181
msgid "Add Slot"
msgstr "Add Slot"

#: flatcamGUI/FlatCAMGUI.py:768 flatcamGUI/FlatCAMGUI.py:1704
#: flatcamGUI/FlatCAMGUI.py:1916 flatcamGUI/FlatCAMGUI.py:2183
msgid "Add Slot Array"
msgstr "Add Slot Array"

#: flatcamGUI/FlatCAMGUI.py:769 flatcamGUI/FlatCAMGUI.py:1918
#: flatcamGUI/FlatCAMGUI.py:2180
msgid "Resize Drill"
msgstr "Resize Drill"

#: flatcamGUI/FlatCAMGUI.py:772 flatcamGUI/FlatCAMGUI.py:2186
msgid "Copy Drill"
msgstr "Copy Drill"

#: flatcamGUI/FlatCAMGUI.py:773 flatcamGUI/FlatCAMGUI.py:2188
msgid "Delete Drill"
msgstr "Delete Drill"

#: flatcamGUI/FlatCAMGUI.py:776 flatcamGUI/FlatCAMGUI.py:2191
msgid "Move Drill"
msgstr "Move Drill"

#: flatcamGUI/FlatCAMGUI.py:782 flatcamGUI/FlatCAMGUI.py:2195
msgid "Add Circle"
msgstr "Add Circle"

#: flatcamGUI/FlatCAMGUI.py:783 flatcamGUI/FlatCAMGUI.py:2196
msgid "Add Arc"
msgstr "Add Arc"

#: flatcamGUI/FlatCAMGUI.py:785 flatcamGUI/FlatCAMGUI.py:2198
msgid "Add Rectangle"
msgstr "Add Rectangle"

#: flatcamGUI/FlatCAMGUI.py:788 flatcamGUI/FlatCAMGUI.py:2201
msgid "Add Path"
msgstr "Add Path"

#: flatcamGUI/FlatCAMGUI.py:789 flatcamGUI/FlatCAMGUI.py:2203
msgid "Add Polygon"
msgstr "Add Polygon"

#: flatcamGUI/FlatCAMGUI.py:791 flatcamGUI/FlatCAMGUI.py:2205
msgid "Add Text"
msgstr "Add Text"

#: flatcamGUI/FlatCAMGUI.py:792 flatcamGUI/FlatCAMGUI.py:2206
msgid "Add Buffer"
msgstr "Add Buffer"

#: flatcamGUI/FlatCAMGUI.py:793 flatcamGUI/FlatCAMGUI.py:2207
msgid "Paint Shape"
msgstr "Paint Shape"

#: flatcamGUI/FlatCAMGUI.py:794 flatcamGUI/FlatCAMGUI.py:836
#: flatcamGUI/FlatCAMGUI.py:1877 flatcamGUI/FlatCAMGUI.py:1905
#: flatcamGUI/FlatCAMGUI.py:2208 flatcamGUI/FlatCAMGUI.py:2247
msgid "Eraser"
msgstr "Eraser"

#: flatcamGUI/FlatCAMGUI.py:797 flatcamGUI/FlatCAMGUI.py:2211
msgid "Polygon Union"
msgstr "Polygon Union"

#: flatcamGUI/FlatCAMGUI.py:798 flatcamGUI/FlatCAMGUI.py:2212
msgid "Polygon Explode"
msgstr "Polygon Explode"

#: flatcamGUI/FlatCAMGUI.py:801 flatcamGUI/FlatCAMGUI.py:2215
msgid "Polygon Intersection"
msgstr "Polygon Intersection"

#: flatcamGUI/FlatCAMGUI.py:803 flatcamGUI/FlatCAMGUI.py:2217
msgid "Polygon Subtraction"
msgstr "Polygon Subtraction"

#: flatcamGUI/FlatCAMGUI.py:806 flatcamGUI/FlatCAMGUI.py:2220
msgid "Cut Path"
msgstr "Cut Path"

#: flatcamGUI/FlatCAMGUI.py:807
msgid "Copy Shape(s)"
msgstr "Copy Shape(s)"

#: flatcamGUI/FlatCAMGUI.py:810
msgid "Delete Shape '-'"
msgstr "Delete Shape '-'"

#: flatcamGUI/FlatCAMGUI.py:812 flatcamGUI/FlatCAMGUI.py:843
#: flatcamGUI/FlatCAMGUI.py:1884 flatcamGUI/FlatCAMGUI.py:1909
#: flatcamGUI/FlatCAMGUI.py:2225 flatcamGUI/FlatCAMGUI.py:2254
msgid "Transformations"
msgstr "Transformations"

#: flatcamGUI/FlatCAMGUI.py:814
msgid "Move Objects "
msgstr "Move Objects "

#: flatcamGUI/FlatCAMGUI.py:820 flatcamGUI/FlatCAMGUI.py:1824
#: flatcamGUI/FlatCAMGUI.py:2232
msgid "Add Pad"
msgstr "Add Pad"

#: flatcamGUI/FlatCAMGUI.py:822 flatcamGUI/FlatCAMGUI.py:1825
#: flatcamGUI/FlatCAMGUI.py:2234
msgid "Add Track"
msgstr "Add Track"

#: flatcamGUI/FlatCAMGUI.py:823 flatcamGUI/FlatCAMGUI.py:1824
#: flatcamGUI/FlatCAMGUI.py:2235
msgid "Add Region"
msgstr "Add Region"

#: flatcamGUI/FlatCAMGUI.py:825 flatcamGUI/FlatCAMGUI.py:1897
#: flatcamGUI/FlatCAMGUI.py:2237
msgid "Poligonize"
msgstr "Poligonize"

#: flatcamGUI/FlatCAMGUI.py:827 flatcamGUI/FlatCAMGUI.py:1898
#: flatcamGUI/FlatCAMGUI.py:2239
msgid "SemiDisc"
msgstr "SemiDisc"

#: flatcamGUI/FlatCAMGUI.py:828 flatcamGUI/FlatCAMGUI.py:1899
#: flatcamGUI/FlatCAMGUI.py:2240
msgid "Disc"
msgstr "Disc"

#: flatcamGUI/FlatCAMGUI.py:834 flatcamGUI/FlatCAMGUI.py:1904
#: flatcamGUI/FlatCAMGUI.py:2246
msgid "Mark Area"
msgstr "Mark Area"

#: flatcamGUI/FlatCAMGUI.py:845 flatcamGUI/FlatCAMGUI.py:1824
#: flatcamGUI/FlatCAMGUI.py:1887 flatcamGUI/FlatCAMGUI.py:1928
#: flatcamGUI/FlatCAMGUI.py:2256 flatcamTools/ToolMove.py:28
msgid "Move"
msgstr "Move"

#: flatcamGUI/FlatCAMGUI.py:852 flatcamGUI/FlatCAMGUI.py:2262
msgid "Snap to grid"
msgstr "Snap to grid"

#: flatcamGUI/FlatCAMGUI.py:855 flatcamGUI/FlatCAMGUI.py:2265
msgid "Grid X snapping distance"
msgstr "Grid X snapping distance"

#: flatcamGUI/FlatCAMGUI.py:860 flatcamGUI/FlatCAMGUI.py:2270
msgid "Grid Y snapping distance"
msgstr "Grid Y snapping distance"

#: flatcamGUI/FlatCAMGUI.py:866 flatcamGUI/FlatCAMGUI.py:2276
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."

#: flatcamGUI/FlatCAMGUI.py:872 flatcamGUI/FlatCAMGUI.py:2282
msgid "Snap to corner"
msgstr "Snap to corner"

#: flatcamGUI/FlatCAMGUI.py:876 flatcamGUI/FlatCAMGUI.py:2286
#: flatcamGUI/PreferencesUI.py:320
msgid "Max. magnet distance"
msgstr "Max. magnet distance"

#: flatcamGUI/FlatCAMGUI.py:898 flatcamGUI/FlatCAMGUI.py:1854
msgid "Project"
msgstr "Project"

#: flatcamGUI/FlatCAMGUI.py:910
msgid "Selected"
msgstr "Selected"

#: flatcamGUI/FlatCAMGUI.py:937 flatcamGUI/FlatCAMGUI.py:945
msgid "Plot Area"
msgstr "Plot Area"

#: flatcamGUI/FlatCAMGUI.py:971
msgid "General"
msgstr "General"

#: flatcamGUI/FlatCAMGUI.py:980
msgid "APP.  DEFAULTS"
msgstr "APP.  DEFAULTS"

#: flatcamGUI/FlatCAMGUI.py:981
msgid "PROJ. OPTIONS "
msgstr "PROJ. OPTIONS "

#: flatcamGUI/FlatCAMGUI.py:993 flatcamTools/ToolDblSided.py:55
#: flatcamTools/ToolOptimal.py:71
msgid "GERBER"
msgstr "GERBER"

#: flatcamGUI/FlatCAMGUI.py:1003 flatcamTools/ToolDblSided.py:79
msgid "EXCELLON"
msgstr "EXCELLON"

#: flatcamGUI/FlatCAMGUI.py:1013 flatcamTools/ToolDblSided.py:103
msgid "GEOMETRY"
msgstr "GEOMETRY"

#: flatcamGUI/FlatCAMGUI.py:1023
msgid "CNC-JOB"
msgstr "CNC-JOB"

#: flatcamGUI/FlatCAMGUI.py:1032 flatcamGUI/ObjectUI.py:524
msgid "TOOLS"
msgstr "TOOLS"

#: flatcamGUI/FlatCAMGUI.py:1041
msgid "TOOLS 2"
msgstr "TOOLS 2"

#: flatcamGUI/FlatCAMGUI.py:1051
msgid "UTILITIES"
msgstr "UTILITIES"

#: flatcamGUI/FlatCAMGUI.py:1068
msgid "Import Preferences"
msgstr "Import Preferences"

#: flatcamGUI/FlatCAMGUI.py:1071
msgid ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."
msgstr ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."

#: flatcamGUI/FlatCAMGUI.py:1078
msgid "Export Preferences"
msgstr "Export Preferences"

#: flatcamGUI/FlatCAMGUI.py:1081
msgid ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."
msgstr ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."

#: flatcamGUI/FlatCAMGUI.py:1086
msgid "Open Pref Folder"
msgstr "Open Pref Folder"

#: flatcamGUI/FlatCAMGUI.py:1089
msgid "Open the folder where FlatCAM save the preferences files."
msgstr "Open the folder where FlatCAM save the preferences files."

#: flatcamGUI/FlatCAMGUI.py:1100
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."

#: flatcamGUI/FlatCAMGUI.py:1425
msgid "SHOW SHORTCUT LIST"
msgstr "SHOW SHORTCUT LIST"

#: flatcamGUI/FlatCAMGUI.py:1425
msgid "Switch to Project Tab"
msgstr "Switch to Project Tab"

#: flatcamGUI/FlatCAMGUI.py:1425
msgid "Switch to Selected Tab"
msgstr "Switch to Selected Tab"

#: flatcamGUI/FlatCAMGUI.py:1426
msgid "Switch to Tool Tab"
msgstr "Switch to Tool Tab"

#: flatcamGUI/FlatCAMGUI.py:1427
msgid "New Gerber"
msgstr "New Gerber"

#: flatcamGUI/FlatCAMGUI.py:1427
msgid "Edit Object (if selected)"
msgstr "Edit Object (if selected)"

#: flatcamGUI/FlatCAMGUI.py:1427
msgid "Jump to Coordinates"
msgstr "Jump to Coordinates"

#: flatcamGUI/FlatCAMGUI.py:1428
msgid "New Excellon"
msgstr "New Excellon"

#: flatcamGUI/FlatCAMGUI.py:1428
msgid "Move Obj"
msgstr "Move Obj"

#: flatcamGUI/FlatCAMGUI.py:1428
msgid "New Geometry"
msgstr "New Geometry"

#: flatcamGUI/FlatCAMGUI.py:1428
msgid "Change Units"
msgstr "Change Units"

#: flatcamGUI/FlatCAMGUI.py:1429
msgid "Open Properties Tool"
msgstr "Open Properties Tool"

#: flatcamGUI/FlatCAMGUI.py:1429
msgid "Rotate by 90 degree CW"
msgstr "Rotate by 90 degree CW"

#: flatcamGUI/FlatCAMGUI.py:1429
msgid "Shell Toggle"
msgstr "Shell Toggle"

#: flatcamGUI/FlatCAMGUI.py:1430
msgid ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"
msgstr ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"

#: flatcamGUI/FlatCAMGUI.py:1431
msgid "Flip on X_axis"
msgstr "Flip on X_axis"

#: flatcamGUI/FlatCAMGUI.py:1431
msgid "Flip on Y_axis"
msgstr "Flip on Y_axis"

#: flatcamGUI/FlatCAMGUI.py:1431
msgid "Copy Obj"
msgstr "Copy Obj"

#: flatcamGUI/FlatCAMGUI.py:1432
msgid "Open Excellon File"
msgstr "Open Excellon File"

#: flatcamGUI/FlatCAMGUI.py:1432
msgid "Open Gerber File"
msgstr "Open Gerber File"

#: flatcamGUI/FlatCAMGUI.py:1432
msgid "New Project"
msgstr "New Project"

#: flatcamGUI/FlatCAMGUI.py:1433
msgid "Save Project As"
msgstr "Save Project As"

#: flatcamGUI/FlatCAMGUI.py:1433
msgid "Toggle Plot Area"
msgstr "Toggle Plot Area"

#: flatcamGUI/FlatCAMGUI.py:1433
msgid "Copy Obj_Name"
msgstr "Copy Obj_Name"

#: flatcamGUI/FlatCAMGUI.py:1434
msgid "Toggle Code Editor"
msgstr "Toggle Code Editor"

#: flatcamGUI/FlatCAMGUI.py:1434
msgid "Toggle the axis"
msgstr "Toggle the axis"

#: flatcamGUI/FlatCAMGUI.py:1434 flatcamGUI/FlatCAMGUI.py:1618
#: flatcamGUI/FlatCAMGUI.py:1705 flatcamGUI/FlatCAMGUI.py:1827
msgid "Distance Minimum Tool"
msgstr "Distance Minimum Tool"

#: flatcamGUI/FlatCAMGUI.py:1434
msgid "Open Preferences Window"
msgstr "Open Preferences Window"

#: flatcamGUI/FlatCAMGUI.py:1435
msgid "Rotate by 90 degree CCW"
msgstr "Rotate by 90 degree CCW"

#: flatcamGUI/FlatCAMGUI.py:1435
msgid "Run a Script"
msgstr "Run a Script"

#: flatcamGUI/FlatCAMGUI.py:1435
msgid "Toggle the workspace"
msgstr "Toggle the workspace"

#: flatcamGUI/FlatCAMGUI.py:1435
msgid "Skew on X axis"
msgstr "Skew on X axis"

#: flatcamGUI/FlatCAMGUI.py:1436
msgid "Skew on Y axis"
msgstr "Skew on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1436
msgid "2-Sided PCB Tool"
msgstr "2-Sided PCB Tool"

#: flatcamGUI/FlatCAMGUI.py:1436
msgid "Transformations Tool"
msgstr "Transformations Tool"

#: flatcamGUI/FlatCAMGUI.py:1437
msgid "Solder Paste Dispensing Tool"
msgstr "Solder Paste Dispensing Tool"

#: flatcamGUI/FlatCAMGUI.py:1438
msgid "Film PCB Tool"
msgstr "Film PCB Tool"

#: flatcamGUI/FlatCAMGUI.py:1438
msgid "Non-Copper Clearing Tool"
msgstr "Non-Copper Clearing Tool"

#: flatcamGUI/FlatCAMGUI.py:1439
msgid "Paint Area Tool"
msgstr "Paint Area Tool"

#: flatcamGUI/FlatCAMGUI.py:1439 flatcamTools/ToolPDF.py:42
msgid "PDF Import Tool"
msgstr "PDF Import Tool"

#: flatcamGUI/FlatCAMGUI.py:1439
msgid "Rules Check Tool"
msgstr "Rules Check Tool"

#: flatcamGUI/FlatCAMGUI.py:1440
msgid "View File Source"
msgstr "View File Source"

#: flatcamGUI/FlatCAMGUI.py:1441
msgid "Cutout PCB Tool"
msgstr "Cutout PCB Tool"

#: flatcamGUI/FlatCAMGUI.py:1441
msgid "Enable all Plots"
msgstr "Enable all Plots"

#: flatcamGUI/FlatCAMGUI.py:1441
msgid "Disable all Plots"
msgstr "Disable all Plots"

#: flatcamGUI/FlatCAMGUI.py:1441
msgid "Disable Non-selected Plots"
msgstr "Disable Non-selected Plots"

#: flatcamGUI/FlatCAMGUI.py:1442
msgid "Toggle Full Screen"
msgstr "Toggle Full Screen"

#: flatcamGUI/FlatCAMGUI.py:1442
msgid "Abort current task (gracefully)"
msgstr "Abort current task (gracefully)"

#: flatcamGUI/FlatCAMGUI.py:1442
msgid "Open Online Manual"
msgstr "Open Online Manual"

#: flatcamGUI/FlatCAMGUI.py:1443
msgid "Open Online Tutorials"
msgstr "Open Online Tutorials"

#: flatcamGUI/FlatCAMGUI.py:1443
msgid "Refresh Plots"
msgstr "Refresh Plots"

#: flatcamGUI/FlatCAMGUI.py:1443 flatcamTools/ToolSolderPaste.py:414
msgid "Delete Object"
msgstr "Delete Object"

#: flatcamGUI/FlatCAMGUI.py:1443
msgid "Alternate: Delete Tool"
msgstr "Alternate: Delete Tool"

#: flatcamGUI/FlatCAMGUI.py:1444
msgid "(left to Key_1)Toogle Notebook Area (Left Side)"
msgstr "(left to Key_1)Toogle Notebook Area (Left Side)"

#: flatcamGUI/FlatCAMGUI.py:1444
msgid "En(Dis)able Obj Plot"
msgstr "En(Dis)able Obj Plot"

#: flatcamGUI/FlatCAMGUI.py:1445
msgid "Deselects all objects"
msgstr "Deselects all objects"

#: flatcamGUI/FlatCAMGUI.py:1459
msgid "Editor Shortcut list"
msgstr "Editor Shortcut list"

#: flatcamGUI/FlatCAMGUI.py:1613
msgid "GEOMETRY EDITOR"
msgstr "GEOMETRY EDITOR"

#: flatcamGUI/FlatCAMGUI.py:1613
msgid "Draw an Arc"
msgstr "Draw an Arc"

#: flatcamGUI/FlatCAMGUI.py:1613
msgid "Copy Geo Item"
msgstr "Copy Geo Item"

#: flatcamGUI/FlatCAMGUI.py:1614
msgid "Within Add Arc will toogle the ARC direction: CW or CCW"
msgstr "Within Add Arc will toogle the ARC direction: CW or CCW"

#: flatcamGUI/FlatCAMGUI.py:1614
msgid "Polygon Intersection Tool"
msgstr "Polygon Intersection Tool"

#: flatcamGUI/FlatCAMGUI.py:1615
msgid "Geo Paint Tool"
msgstr "Geo Paint Tool"

#: flatcamGUI/FlatCAMGUI.py:1615 flatcamGUI/FlatCAMGUI.py:1704
#: flatcamGUI/FlatCAMGUI.py:1824
msgid "Jump to Location (x, y)"
msgstr "Jump to Location (x, y)"

#: flatcamGUI/FlatCAMGUI.py:1615
msgid "Toggle Corner Snap"
msgstr "Toggle Corner Snap"

#: flatcamGUI/FlatCAMGUI.py:1615
msgid "Move Geo Item"
msgstr "Move Geo Item"

#: flatcamGUI/FlatCAMGUI.py:1616
msgid "Within Add Arc will cycle through the ARC modes"
msgstr "Within Add Arc will cycle through the ARC modes"

#: flatcamGUI/FlatCAMGUI.py:1616
msgid "Draw a Polygon"
msgstr "Draw a Polygon"

#: flatcamGUI/FlatCAMGUI.py:1616
msgid "Draw a Circle"
msgstr "Draw a Circle"

#: flatcamGUI/FlatCAMGUI.py:1617
msgid "Draw a Path"
msgstr "Draw a Path"

#: flatcamGUI/FlatCAMGUI.py:1617
msgid "Draw Rectangle"
msgstr "Draw Rectangle"

#: flatcamGUI/FlatCAMGUI.py:1617
msgid "Polygon Subtraction Tool"
msgstr "Polygon Subtraction Tool"

#: flatcamGUI/FlatCAMGUI.py:1617
msgid "Add Text Tool"
msgstr "Add Text Tool"

#: flatcamGUI/FlatCAMGUI.py:1618
msgid "Polygon Union Tool"
msgstr "Polygon Union Tool"

#: flatcamGUI/FlatCAMGUI.py:1618
msgid "Flip shape on X axis"
msgstr "Flip shape on X axis"

#: flatcamGUI/FlatCAMGUI.py:1618
msgid "Flip shape on Y axis"
msgstr "Flip shape on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1619
msgid "Skew shape on X axis"
msgstr "Skew shape on X axis"

#: flatcamGUI/FlatCAMGUI.py:1619
msgid "Skew shape on Y axis"
msgstr "Skew shape on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1619
msgid "Editor Transformation Tool"
msgstr "Editor Transformation Tool"

#: flatcamGUI/FlatCAMGUI.py:1620
msgid "Offset shape on X axis"
msgstr "Offset shape on X axis"

#: flatcamGUI/FlatCAMGUI.py:1620
msgid "Offset shape on Y axis"
msgstr "Offset shape on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1621 flatcamGUI/FlatCAMGUI.py:1707
#: flatcamGUI/FlatCAMGUI.py:1829
msgid "Save Object and Exit Editor"
msgstr "Save Object and Exit Editor"

#: flatcamGUI/FlatCAMGUI.py:1621
msgid "Polygon Cut Tool"
msgstr "Polygon Cut Tool"

#: flatcamGUI/FlatCAMGUI.py:1622
msgid "Rotate Geometry"
msgstr "Rotate Geometry"

#: flatcamGUI/FlatCAMGUI.py:1622
msgid "Finish drawing for certain tools"
msgstr "Finish drawing for certain tools"

#: flatcamGUI/FlatCAMGUI.py:1622 flatcamGUI/FlatCAMGUI.py:1707
#: flatcamGUI/FlatCAMGUI.py:1827
msgid "Abort and return to Select"
msgstr "Abort and return to Select"

#: flatcamGUI/FlatCAMGUI.py:1623 flatcamGUI/FlatCAMGUI.py:2223
msgid "Delete Shape"
msgstr "Delete Shape"

#: flatcamGUI/FlatCAMGUI.py:1703
msgid "EXCELLON EDITOR"
msgstr "EXCELLON EDITOR"

#: flatcamGUI/FlatCAMGUI.py:1703
msgid "Copy Drill(s)"
msgstr "Copy Drill(s)"

#: flatcamGUI/FlatCAMGUI.py:1703 flatcamGUI/FlatCAMGUI.py:1912
msgid "Add Drill"
msgstr "Add Drill"

#: flatcamGUI/FlatCAMGUI.py:1704
msgid "Move Drill(s)"
msgstr "Move Drill(s)"

#: flatcamGUI/FlatCAMGUI.py:1705
msgid "Add a new Tool"
msgstr "Add a new Tool"

#: flatcamGUI/FlatCAMGUI.py:1706
msgid "Delete Drill(s)"
msgstr "Delete Drill(s)"

#: flatcamGUI/FlatCAMGUI.py:1706
msgid "Alternate: Delete Tool(s)"
msgstr "Alternate: Delete Tool(s)"

#: flatcamGUI/FlatCAMGUI.py:1823
msgid "GERBER EDITOR"
msgstr "GERBER EDITOR"

#: flatcamGUI/FlatCAMGUI.py:1823
msgid "Add Disc"
msgstr "Add Disc"

#: flatcamGUI/FlatCAMGUI.py:1823
msgid "Add SemiDisc"
msgstr "Add SemiDisc"

#: flatcamGUI/FlatCAMGUI.py:1825
msgid "Within Track & Region Tools will cycle in REVERSE the bend modes"
msgstr "Within Track & Region Tools will cycle in REVERSE the bend modes"

#: flatcamGUI/FlatCAMGUI.py:1826
msgid "Within Track & Region Tools will cycle FORWARD the bend modes"
msgstr "Within Track & Region Tools will cycle FORWARD the bend modes"

#: flatcamGUI/FlatCAMGUI.py:1827
msgid "Alternate: Delete Apertures"
msgstr "Alternate: Delete Apertures"

#: flatcamGUI/FlatCAMGUI.py:1828
msgid "Eraser Tool"
msgstr "Eraser Tool"

#: flatcamGUI/FlatCAMGUI.py:1829 flatcamGUI/PreferencesUI.py:1851
msgid "Mark Area Tool"
msgstr "Mark Area Tool"

#: flatcamGUI/FlatCAMGUI.py:1829
msgid "Poligonize Tool"
msgstr "Poligonize Tool"

#: flatcamGUI/FlatCAMGUI.py:1829
msgid "Transformation Tool"
msgstr "Transformation Tool"

#: flatcamGUI/FlatCAMGUI.py:1845
msgid "Toggle Visibility"
msgstr "Toggle Visibility"

#: flatcamGUI/FlatCAMGUI.py:1849
msgid "New"
msgstr "New"

#: flatcamGUI/FlatCAMGUI.py:1850
msgid "Geometry"
msgstr "Geometry"

#: flatcamGUI/FlatCAMGUI.py:1852 flatcamTools/ToolFilm.py:329
msgid "Excellon"
msgstr "Excellon"

#: flatcamGUI/FlatCAMGUI.py:1857
msgid "Grids"
msgstr "Grids"

#: flatcamGUI/FlatCAMGUI.py:1859
msgid "View"
msgstr "View"

#: flatcamGUI/FlatCAMGUI.py:1861
msgid "Clear Plot"
msgstr "Clear Plot"

#: flatcamGUI/FlatCAMGUI.py:1862
msgid "Replot"
msgstr "Replot"

#: flatcamGUI/FlatCAMGUI.py:1865
msgid "Geo Editor"
msgstr "Geo Editor"

#: flatcamGUI/FlatCAMGUI.py:1866
msgid "Path"
msgstr "Path"

#: flatcamGUI/FlatCAMGUI.py:1867
msgid "Rectangle"
msgstr "Rectangle"

#: flatcamGUI/FlatCAMGUI.py:1869
msgid "Circle"
msgstr "Circle"

#: flatcamGUI/FlatCAMGUI.py:1870
msgid "Polygon"
msgstr "Polygon"

#: flatcamGUI/FlatCAMGUI.py:1871
msgid "Arc"
msgstr "Arc"

#: flatcamGUI/FlatCAMGUI.py:1880
msgid "Union"
msgstr "Union"

#: flatcamGUI/FlatCAMGUI.py:1881
msgid "Intersection"
msgstr "Intersection"

#: flatcamGUI/FlatCAMGUI.py:1882
msgid "Subtraction"
msgstr "Subtraction"

#: flatcamGUI/FlatCAMGUI.py:1883 flatcamGUI/ObjectUI.py:1604
#: flatcamGUI/PreferencesUI.py:3392
msgid "Cut"
msgstr "Cut"

#: flatcamGUI/FlatCAMGUI.py:1890
msgid "Pad"
msgstr "Pad"

#: flatcamGUI/FlatCAMGUI.py:1891
msgid "Pad Array"
msgstr "Pad Array"

#: flatcamGUI/FlatCAMGUI.py:1894
msgid "Track"
msgstr "Track"

#: flatcamGUI/FlatCAMGUI.py:1895
msgid "Region"
msgstr "Region"

#: flatcamGUI/FlatCAMGUI.py:1911
msgid "Exc Editor"
msgstr "Exc Editor"

#: flatcamGUI/FlatCAMGUI.py:1941
msgid ""
"Relative neasurement.\n"
"Reference is last click position"
msgstr ""
"Relative neasurement.\n"
"Reference is last click position"

#: flatcamGUI/FlatCAMGUI.py:1947
msgid ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"

#: flatcamGUI/FlatCAMGUI.py:2064
msgid "Lock Toolbars"
msgstr "Lock Toolbars"

#: flatcamGUI/FlatCAMGUI.py:2158
msgid "&Cutout Tool"
msgstr "&Cutout Tool"

#: flatcamGUI/FlatCAMGUI.py:2194
msgid "Select 'Esc'"
msgstr "Select 'Esc'"

#: flatcamGUI/FlatCAMGUI.py:2221
msgid "Copy Objects"
msgstr "Copy Objects"

#: flatcamGUI/FlatCAMGUI.py:2228
msgid "Move Objects"
msgstr "Move Objects"

#: flatcamGUI/FlatCAMGUI.py:2710
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."

#: flatcamGUI/FlatCAMGUI.py:2717 flatcamGUI/FlatCAMGUI.py:2860
#: flatcamGUI/FlatCAMGUI.py:2919 flatcamGUI/FlatCAMGUI.py:2939
msgid "Warning"
msgstr "Warning"

#: flatcamGUI/FlatCAMGUI.py:2855
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Intersection Tool."

#: flatcamGUI/FlatCAMGUI.py:2914
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Substraction Tool."

#: flatcamGUI/FlatCAMGUI.py:2934
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""
"Please select geometry items \n"
"on which to perform union."

#: flatcamGUI/FlatCAMGUI.py:3018 flatcamGUI/FlatCAMGUI.py:3236
msgid "Cancelled. Nothing selected to delete."
msgstr "Cancelled. Nothing selected to delete."

#: flatcamGUI/FlatCAMGUI.py:3103 flatcamGUI/FlatCAMGUI.py:3304
msgid "Cancelled. Nothing selected to copy."
msgstr "Cancelled. Nothing selected to copy."

#: flatcamGUI/FlatCAMGUI.py:3150 flatcamGUI/FlatCAMGUI.py:3351
msgid "Cancelled. Nothing selected to move."
msgstr "Cancelled. Nothing selected to move."

#: flatcamGUI/FlatCAMGUI.py:3377
msgid "New Tool ..."
msgstr "New Tool ..."

#: flatcamGUI/FlatCAMGUI.py:3378 flatcamTools/ToolNonCopperClear.py:556
#: flatcamTools/ToolPaint.py:470 flatcamTools/ToolSolderPaste.py:464
msgid "Enter a Tool Diameter"
msgstr "Enter a Tool Diameter"

#: flatcamGUI/FlatCAMGUI.py:3394
msgid "Adding Tool cancelled ..."
msgstr "Adding Tool cancelled ..."

#: flatcamGUI/FlatCAMGUI.py:3437
msgid "Distance Tool exit..."
msgstr "Distance Tool exit..."

#: flatcamGUI/FlatCAMGUI.py:3543
msgid "Application is saving the project. Please wait ..."
msgstr "Application is saving the project. Please wait ..."

#: flatcamGUI/FlatCAMGUI.py:3581 flatcamGUI/FlatCAMGUI.py:3588
msgid "Idle."
msgstr "Idle."

#: flatcamGUI/FlatCAMGUI.py:3617
msgid "Application started ..."
msgstr "Application started ..."

#: flatcamGUI/FlatCAMGUI.py:3618
msgid "Hello!"
msgstr "Hello!"

#: flatcamGUI/FlatCAMGUI.py:3674
msgid "Open Project ..."
msgstr "Open Project ..."

#: flatcamGUI/FlatCAMGUI.py:3699
msgid "Exit"
msgstr "Exit"

#: flatcamGUI/FlatCAMGUI.py:3748 flatcamGUI/FlatCAMGUI.py:3775
msgid "Title"
msgstr "Title"

#: flatcamGUI/FlatCAMGUI.py:3749 flatcamGUI/FlatCAMGUI.py:3779
msgid "Web Link"
msgstr "Web Link"

#: flatcamGUI/FlatCAMGUI.py:3753
msgid ""
"Index.\n"
"The rows in gray color will populate the Bookmarks menu.\n"
"The number of gray colored rows is set in Preferences."
msgstr ""
"Index.\n"
"The rows in gray color will populate the Bookmarks menu.\n"
"The number of gray colored rows is set in Preferences."

#: flatcamGUI/FlatCAMGUI.py:3757
msgid ""
"Description of the link that is set as an menu action.\n"
"Try to keep it short because it is installed as a menu item."
msgstr ""
"Description of the link that is set as an menu action.\n"
"Try to keep it short because it is installed as a menu item."

#: flatcamGUI/FlatCAMGUI.py:3760
msgid "Web Link. E.g: https://your_website.org "
msgstr "Web Link. E.g: https://your_website.org "

#: flatcamGUI/FlatCAMGUI.py:3769
msgid "New Bookmark"
msgstr "New Bookmark"

#: flatcamGUI/FlatCAMGUI.py:3788
msgid "Add Entry"
msgstr "Add Entry"

#: flatcamGUI/FlatCAMGUI.py:3789
msgid "Remove Entry"
msgstr "Remove Entry"

#: flatcamGUI/FlatCAMGUI.py:3790
msgid "Export List"
msgstr "Export List"

#: flatcamGUI/FlatCAMGUI.py:3791
msgid "Import List"
msgstr "Import List"

#: flatcamGUI/FlatCAMGUI.py:3926
msgid "This bookmark can not be removed"
msgstr "This bookmark can not be removed"

#: flatcamGUI/FlatCAMGUI.py:3982
msgid "FlatCAM bookmarks export cancelled."
msgstr "FlatCAM bookmarks export cancelled."

#: flatcamGUI/FlatCAMGUI.py:4002 flatcamGUI/FlatCAMGUI.py:4037
msgid "Could not load bookmarks file."
msgstr "Could not load bookmarks file."

#: flatcamGUI/FlatCAMGUI.py:4013
msgid "Failed to write bookmarks to file."
msgstr "Failed to write bookmarks to file."

#: flatcamGUI/FlatCAMGUI.py:4016
msgid "Exported bookmarks to"
msgstr "Exported bookmarks to"

#: flatcamGUI/FlatCAMGUI.py:4022
msgid "Import FlatCAM Bookmarks"
msgstr "Import FlatCAM Bookmarks"

#: flatcamGUI/FlatCAMGUI.py:4029
msgid "FlatCAM bookmarks import cancelled."
msgstr "FlatCAM bookmarks import cancelled."

#: flatcamGUI/FlatCAMGUI.py:4045
msgid "Imported Bookmarks from"
msgstr "Imported Bookmarks from"

#: flatcamGUI/ObjectUI.py:32
msgid "FlatCAM Object"
msgstr "FlatCAM Object"

#: flatcamGUI/ObjectUI.py:59
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."

#: flatcamGUI/ObjectUI.py:87
msgid "Change the size of the object."
msgstr "Change the size of the object."

#: flatcamGUI/ObjectUI.py:93
msgid "Factor"
msgstr "Factor"

#: flatcamGUI/ObjectUI.py:95
msgid ""
"Factor by which to multiply\n"
"geometric features of this object."
msgstr ""
"Factor by which to multiply\n"
"geometric features of this object."

#: flatcamGUI/ObjectUI.py:108
msgid "Perform scaling operation."
msgstr "Perform scaling operation."

#: flatcamGUI/ObjectUI.py:119
msgid "Change the position of this object."
msgstr "Change the position of this object."

#: flatcamGUI/ObjectUI.py:124
msgid "Vector"
msgstr "Vector"

#: flatcamGUI/ObjectUI.py:126
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."
msgstr ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."

#: flatcamGUI/ObjectUI.py:134
msgid "Perform the offset operation."
msgstr "Perform the offset operation."

#: flatcamGUI/ObjectUI.py:151
msgid "Gerber Object"
msgstr "Gerber Object"

#: flatcamGUI/ObjectUI.py:161 flatcamGUI/ObjectUI.py:655
#: flatcamGUI/ObjectUI.py:1039 flatcamGUI/ObjectUI.py:1588
#: flatcamGUI/PreferencesUI.py:1190 flatcamGUI/PreferencesUI.py:1890
#: flatcamGUI/PreferencesUI.py:2901 flatcamGUI/PreferencesUI.py:3366
msgid "Plot Options"
msgstr "Plot Options"

#: flatcamGUI/ObjectUI.py:167 flatcamGUI/ObjectUI.py:656
#: flatcamGUI/PreferencesUI.py:1197 flatcamGUI/PreferencesUI.py:1902
msgid "Solid"
msgstr "Solid"

#: flatcamGUI/ObjectUI.py:169 flatcamGUI/PreferencesUI.py:1199
msgid "Solid color polygons."
msgstr "Solid color polygons."

#: flatcamGUI/ObjectUI.py:175 flatcamGUI/PreferencesUI.py:1204
msgid "M-Color"
msgstr "M-Color"

#: flatcamGUI/ObjectUI.py:177 flatcamGUI/PreferencesUI.py:1206
msgid "Draw polygons in different colors."
msgstr "Draw polygons in different colors."

#: flatcamGUI/ObjectUI.py:183 flatcamGUI/ObjectUI.py:694
#: flatcamGUI/PreferencesUI.py:1211 flatcamGUI/PreferencesUI.py:1896
#: flatcamGUI/PreferencesUI.py:2905
msgid "Plot"
msgstr "Plot"

#: flatcamGUI/ObjectUI.py:185 flatcamGUI/ObjectUI.py:696
#: flatcamGUI/ObjectUI.py:1085 flatcamGUI/ObjectUI.py:1698
#: flatcamGUI/PreferencesUI.py:1213 flatcamGUI/PreferencesUI.py:2907
#: flatcamGUI/PreferencesUI.py:3377
msgid "Plot (show) this object."
msgstr "Plot (show) this object."

#: flatcamGUI/ObjectUI.py:193 flatcamGUI/ObjectUI.py:667
#: flatcamGUI/ObjectUI.py:1045 flatcamGUI/ObjectUI.py:1618
#: flatcamGUI/ObjectUI.py:1879 flatcamGUI/ObjectUI.py:1931
msgid "Name"
msgstr "Name"

#: flatcamGUI/ObjectUI.py:214
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/ObjectUI.py:224
msgid "Mark All"
msgstr "Mark All"

#: flatcamGUI/ObjectUI.py:226
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/ObjectUI.py:254
msgid "Mark the aperture instances on canvas."
msgstr "Mark the aperture instances on canvas."

#: flatcamGUI/ObjectUI.py:263 flatcamGUI/PreferencesUI.py:1290
msgid "Isolation Routing"
msgstr "Isolation Routing"

#: flatcamGUI/ObjectUI.py:265 flatcamGUI/PreferencesUI.py:1292
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."

#: flatcamGUI/ObjectUI.py:280 flatcamGUI/PreferencesUI.py:1464
#: flatcamGUI/PreferencesUI.py:3711 flatcamTools/ToolNonCopperClear.py:208
msgid "Tool Type"
msgstr "Tool Type"

#: flatcamGUI/ObjectUI.py:282 flatcamGUI/PreferencesUI.py:1466
msgid ""
"Choose what tool to use for Gerber isolation:\n"
"'Circular' or 'V-shape'.\n"
"When the 'V-shape' is selected then the tool\n"
"diameter will depend on the chosen cut depth."
msgstr ""
"Choose what tool to use for Gerber isolation:\n"
"'Circular' or 'V-shape'.\n"
"When the 'V-shape' is selected then the tool\n"
"diameter will depend on the chosen cut depth."

#: flatcamGUI/ObjectUI.py:294 flatcamGUI/ObjectUI.py:1258
#: flatcamGUI/PreferencesUI.py:1478 flatcamGUI/PreferencesUI.py:3730
#: flatcamTools/ToolNonCopperClear.py:235
msgid "V-Tip Dia"
msgstr "V-Tip Dia"

#: flatcamGUI/ObjectUI.py:296 flatcamGUI/ObjectUI.py:1261
#: flatcamGUI/PreferencesUI.py:1480 flatcamGUI/PreferencesUI.py:3732
#: flatcamTools/ToolNonCopperClear.py:237
msgid "The tip diameter for V-Shape Tool"
msgstr "The tip diameter for V-Shape Tool"

#: flatcamGUI/ObjectUI.py:307 flatcamGUI/ObjectUI.py:1273
#: flatcamGUI/PreferencesUI.py:1490 flatcamGUI/PreferencesUI.py:3742
#: flatcamTools/ToolNonCopperClear.py:245
msgid "V-Tip Angle"
msgstr "V-Tip Angle"

#: flatcamGUI/ObjectUI.py:309 flatcamGUI/ObjectUI.py:1276
#: flatcamGUI/PreferencesUI.py:1492 flatcamGUI/PreferencesUI.py:3744
#: flatcamTools/ToolNonCopperClear.py:247
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
"The tip angle for V-Shape Tool.\n"
"In degree."

#: flatcamGUI/ObjectUI.py:321 flatcamGUI/ObjectUI.py:749
#: flatcamGUI/ObjectUI.py:1289 flatcamGUI/PreferencesUI.py:1503
#: flatcamGUI/PreferencesUI.py:2145 flatcamGUI/PreferencesUI.py:2967
#: flatcamGUI/PreferencesUI.py:3796 flatcamGUI/PreferencesUI.py:4670
#: flatcamTools/ToolCalculators.py:110 flatcamTools/ToolNonCopperClear.py:291
msgid "Cut Z"
msgstr "Cut Z"

#: flatcamGUI/ObjectUI.py:323 flatcamGUI/ObjectUI.py:1292
#: flatcamGUI/PreferencesUI.py:1505 flatcamGUI/PreferencesUI.py:2969
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""
"Cutting depth (negative)\n"
"below the copper surface."

#: flatcamGUI/ObjectUI.py:337
msgid ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."
msgstr ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."

#: flatcamGUI/ObjectUI.py:353 flatcamGUI/PreferencesUI.py:1314
msgid "# Passes"
msgstr "# Passes"

#: flatcamGUI/ObjectUI.py:355 flatcamGUI/PreferencesUI.py:1316
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."

#: flatcamGUI/ObjectUI.py:365 flatcamGUI/PreferencesUI.py:1325
msgid "Pass overlap"
msgstr "Pass overlap"

#: flatcamGUI/ObjectUI.py:367 flatcamGUI/PreferencesUI.py:1327
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25%% from the tool diameter found "
"above."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25%% from the tool diameter found "
"above."

#: flatcamGUI/ObjectUI.py:381 flatcamGUI/PreferencesUI.py:1340
#: flatcamGUI/PreferencesUI.py:3344 flatcamGUI/PreferencesUI.py:3756
#: flatcamTools/ToolNonCopperClear.py:160
msgid "Milling Type"
msgstr "Milling Type"

#: flatcamGUI/ObjectUI.py:383 flatcamGUI/PreferencesUI.py:1342
#: flatcamGUI/PreferencesUI.py:3346
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: flatcamGUI/ObjectUI.py:387 flatcamGUI/PreferencesUI.py:1347
#: flatcamGUI/PreferencesUI.py:3350 flatcamGUI/PreferencesUI.py:3763
#: flatcamTools/ToolNonCopperClear.py:167
msgid "Climb"
msgstr "Climb"

#: flatcamGUI/ObjectUI.py:388 flatcamGUI/PreferencesUI.py:1348
#: flatcamGUI/PreferencesUI.py:3351 flatcamGUI/PreferencesUI.py:3764
#: flatcamTools/ToolNonCopperClear.py:168
msgid "Conv."
msgstr "Conv."

#: flatcamGUI/ObjectUI.py:393 flatcamGUI/PreferencesUI.py:1352
msgid "Combine Passes"
msgstr "Combine Passes"

#: flatcamGUI/ObjectUI.py:395 flatcamGUI/PreferencesUI.py:1354
msgid "Combine all passes into one object"
msgstr "Combine all passes into one object"

#: flatcamGUI/ObjectUI.py:399 flatcamGUI/PreferencesUI.py:1445
msgid "\"Follow\""
msgstr "\"Follow\""

#: flatcamGUI/ObjectUI.py:400 flatcamGUI/PreferencesUI.py:1447
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."

#: flatcamGUI/ObjectUI.py:405
msgid "Except"
msgstr "Except"

#: flatcamGUI/ObjectUI.py:406
msgid ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object bellow\n"
"will be subtracted from the isolation geometry."
msgstr ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object bellow\n"
"will be subtracted from the isolation geometry."

#: flatcamGUI/ObjectUI.py:431 flatcamTools/ToolCutOut.py:72
#: flatcamTools/ToolNonCopperClear.py:82 flatcamTools/ToolPaint.py:85
msgid "Obj Type"
msgstr "Obj Type"

#: flatcamGUI/ObjectUI.py:433
msgid ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamGUI/ObjectUI.py:446 flatcamTools/ToolCutOut.py:88
#: flatcamTools/ToolNonCopperClear.py:100 flatcamTools/ToolPaint.py:103
#: flatcamTools/ToolPanelize.py:80 flatcamTools/ToolPanelize.py:93
msgid "Object"
msgstr "Object"

#: flatcamGUI/ObjectUI.py:447
msgid "Object whose area will be removed from isolation geometry."
msgstr "Object whose area will be removed from isolation geometry."

#: flatcamGUI/ObjectUI.py:451
msgid "Generate Isolation Geometry"
msgstr "Generate Isolation Geometry"

#: flatcamGUI/ObjectUI.py:453
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."

#: flatcamGUI/ObjectUI.py:465
msgid "Buffer Solid Geometry"
msgstr "Buffer Solid Geometry"

#: flatcamGUI/ObjectUI.py:467
msgid ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."
msgstr ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."

#: flatcamGUI/ObjectUI.py:474
msgid "FULL Geo"
msgstr "FULL Geo"

#: flatcamGUI/ObjectUI.py:476
msgid ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."

#: flatcamGUI/ObjectUI.py:485
msgid "Ext Geo"
msgstr "Ext Geo"

#: flatcamGUI/ObjectUI.py:487
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."

#: flatcamGUI/ObjectUI.py:494
msgid "Int Geo"
msgstr "Int Geo"

#: flatcamGUI/ObjectUI.py:496
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."

#: flatcamGUI/ObjectUI.py:528
msgid "Clear N-copper"
msgstr "Clear N-copper"

#: flatcamGUI/ObjectUI.py:530 flatcamGUI/PreferencesUI.py:3694
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."

#: flatcamGUI/ObjectUI.py:537 flatcamTools/ToolNonCopperClear.py:473
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
"Create the Geometry Object\n"
"for non-copper routing."

#: flatcamGUI/ObjectUI.py:544
msgid "Board cutout"
msgstr "Board cutout"

#: flatcamGUI/ObjectUI.py:546 flatcamGUI/PreferencesUI.py:3969
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."

#: flatcamGUI/ObjectUI.py:553
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
"Generate the geometry for\n"
"the board cutout."

#: flatcamGUI/ObjectUI.py:560 flatcamGUI/PreferencesUI.py:1359
msgid "Non-copper regions"
msgstr "Non-copper regions"

#: flatcamGUI/ObjectUI.py:562 flatcamGUI/PreferencesUI.py:1361
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."

#: flatcamGUI/ObjectUI.py:572 flatcamGUI/ObjectUI.py:608
#: flatcamGUI/PreferencesUI.py:1373 flatcamGUI/PreferencesUI.py:1401
msgid "Boundary Margin"
msgstr "Boundary Margin"

#: flatcamGUI/ObjectUI.py:574 flatcamGUI/PreferencesUI.py:1375
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."

#: flatcamGUI/ObjectUI.py:589 flatcamGUI/ObjectUI.py:622
#: flatcamGUI/PreferencesUI.py:1388 flatcamGUI/PreferencesUI.py:1414
msgid "Rounded Geo"
msgstr "Rounded Geo"

#: flatcamGUI/ObjectUI.py:591 flatcamGUI/PreferencesUI.py:1390
msgid "Resulting geometry will have rounded corners."
msgstr "Resulting geometry will have rounded corners."

#: flatcamGUI/ObjectUI.py:595 flatcamGUI/ObjectUI.py:631
#: flatcamTools/ToolCutOut.py:208 flatcamTools/ToolCutOut.py:228
#: flatcamTools/ToolCutOut.py:279 flatcamTools/ToolSolderPaste.py:126
msgid "Generate Geo"
msgstr "Generate Geo"

#: flatcamGUI/ObjectUI.py:600 flatcamGUI/PreferencesUI.py:1395
#: flatcamTools/ToolPanelize.py:94
msgid "Bounding Box"
msgstr "Bounding Box"

#: flatcamGUI/ObjectUI.py:602
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."

#: flatcamGUI/ObjectUI.py:610 flatcamGUI/PreferencesUI.py:1403
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
"Distance of the edges of the box\n"
"to the nearest polygon."

#: flatcamGUI/ObjectUI.py:624 flatcamGUI/PreferencesUI.py:1416
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."

#: flatcamGUI/ObjectUI.py:633
msgid "Generate the Geometry object."
msgstr "Generate the Geometry object."

#: flatcamGUI/ObjectUI.py:645
msgid "Excellon Object"
msgstr "Excellon Object"

#: flatcamGUI/ObjectUI.py:658
msgid "Solid circles."
msgstr "Solid circles."

#: flatcamGUI/ObjectUI.py:706
msgid "Drills"
msgstr "Drills"

#: flatcamGUI/ObjectUI.py:706 flatcamGUI/PreferencesUI.py:2741
msgid "Slots"
msgstr "Slots"

#: flatcamGUI/ObjectUI.py:707 flatcamGUI/PreferencesUI.py:2346
msgid "Offset Z"
msgstr "Offset Z"

#: flatcamGUI/ObjectUI.py:711
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."

#: flatcamGUI/ObjectUI.py:716 flatcamGUI/ObjectUI.py:1110
#: flatcamTools/ToolPaint.py:137
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."

#: flatcamGUI/ObjectUI.py:719
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."

#: flatcamGUI/ObjectUI.py:722
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."

#: flatcamGUI/ObjectUI.py:725 flatcamGUI/PreferencesUI.py:2348
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."

#: flatcamGUI/ObjectUI.py:729
msgid ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."
msgstr ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."

#: flatcamGUI/ObjectUI.py:736 flatcamGUI/PreferencesUI.py:2134
#: flatcamGUI/PreferencesUI.py:2955
msgid "Create CNC Job"
msgstr "Create CNC Job"

#: flatcamGUI/ObjectUI.py:738
msgid ""
"Create a CNC Job object\n"
"for this drill object."
msgstr ""
"Create a CNC Job object\n"
"for this drill object."

#: flatcamGUI/ObjectUI.py:751 flatcamGUI/PreferencesUI.py:2147
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""
"Drill depth (negative)\n"
"below the copper surface."

#: flatcamGUI/ObjectUI.py:763 flatcamGUI/ObjectUI.py:1331
#: flatcamGUI/PreferencesUI.py:2158 flatcamGUI/PreferencesUI.py:3015
msgid "Travel Z"
msgstr "Travel Z"

#: flatcamGUI/ObjectUI.py:765 flatcamGUI/PreferencesUI.py:2160
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""
"Tool height when travelling\n"
"across the XY plane."

#: flatcamGUI/ObjectUI.py:777 flatcamGUI/ObjectUI.py:1352
#: flatcamGUI/PreferencesUI.py:2171 flatcamGUI/PreferencesUI.py:3030
msgid "Tool change"
msgstr "Tool change"

#: flatcamGUI/ObjectUI.py:779 flatcamGUI/PreferencesUI.py:2173
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."

#: flatcamGUI/ObjectUI.py:785 flatcamGUI/ObjectUI.py:1345
msgid "Tool change Z"
msgstr "Tool change Z"

#: flatcamGUI/ObjectUI.py:787 flatcamGUI/ObjectUI.py:1348
#: flatcamGUI/PreferencesUI.py:2182 flatcamGUI/PreferencesUI.py:3045
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr ""
"Z-axis position (height) for\n"
"tool change."

#: flatcamGUI/ObjectUI.py:800 flatcamGUI/PreferencesUI.py:2366
#: flatcamGUI/PreferencesUI.py:3184
msgid "Start move Z"
msgstr "Start move Z"

#: flatcamGUI/ObjectUI.py:802 flatcamGUI/PreferencesUI.py:2368
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/ObjectUI.py:810 flatcamGUI/ObjectUI.py:1381
#: flatcamGUI/PreferencesUI.py:2193 flatcamGUI/PreferencesUI.py:3059
msgid "End move Z"
msgstr "End move Z"

#: flatcamGUI/ObjectUI.py:812 flatcamGUI/ObjectUI.py:1383
#: flatcamGUI/PreferencesUI.py:2195 flatcamGUI/PreferencesUI.py:3061
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr ""
"Height of the tool after\n"
"the last move at the end of the job."

#: flatcamGUI/ObjectUI.py:824 flatcamGUI/PreferencesUI.py:2206
#: flatcamGUI/PreferencesUI.py:5019 flatcamTools/ToolSolderPaste.py:223
msgid "Feedrate Z"
msgstr "Feedrate Z"

#: flatcamGUI/ObjectUI.py:826 flatcamGUI/PreferencesUI.py:2208
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."

#: flatcamGUI/ObjectUI.py:840 flatcamGUI/PreferencesUI.py:2376
msgid "Feedrate Rapids"
msgstr "Feedrate Rapids"

#: flatcamGUI/ObjectUI.py:842 flatcamGUI/PreferencesUI.py:2378
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/ObjectUI.py:860 flatcamGUI/ObjectUI.py:1454
#: flatcamGUI/PreferencesUI.py:3105
msgid "Spindle speed"
msgstr "Spindle speed"

#: flatcamGUI/ObjectUI.py:862 flatcamGUI/PreferencesUI.py:2223
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""
"Speed of the spindle\n"
"in RPM (optional)"

#: flatcamGUI/ObjectUI.py:870 flatcamGUI/ObjectUI.py:1468
#: flatcamGUI/PreferencesUI.py:2231 flatcamGUI/PreferencesUI.py:3118
msgid "Dwell"
msgstr "Dwell"

#: flatcamGUI/ObjectUI.py:872 flatcamGUI/ObjectUI.py:1471
#: flatcamGUI/PreferencesUI.py:2233 flatcamGUI/PreferencesUI.py:3120
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."

#: flatcamGUI/ObjectUI.py:881 flatcamGUI/ObjectUI.py:1481
#: flatcamGUI/PreferencesUI.py:2238 flatcamGUI/PreferencesUI.py:3125
msgid "Number of time units for spindle to dwell."
msgstr "Number of time units for spindle to dwell."

#: flatcamGUI/ObjectUI.py:889 flatcamGUI/PreferencesUI.py:2253
#: flatcamGUI/PreferencesUI.py:3140
msgid "Postprocessor"
msgstr "Postprocessor"

#: flatcamGUI/ObjectUI.py:891 flatcamGUI/PreferencesUI.py:2255
msgid ""
"The postprocessor JSON file that dictates\n"
"Gcode output."
msgstr ""
"The postprocessor JSON file that dictates\n"
"Gcode output."

#: flatcamGUI/ObjectUI.py:900 flatcamGUI/ObjectUI.py:1501
#: flatcamGUI/PreferencesUI.py:2392 flatcamGUI/PreferencesUI.py:3222
msgid "Probe Z depth"
msgstr "Probe Z depth"

#: flatcamGUI/ObjectUI.py:902 flatcamGUI/ObjectUI.py:1503
#: flatcamGUI/PreferencesUI.py:2394 flatcamGUI/PreferencesUI.py:3224
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."

#: flatcamGUI/ObjectUI.py:916 flatcamGUI/ObjectUI.py:1518
#: flatcamGUI/PreferencesUI.py:2405 flatcamGUI/PreferencesUI.py:3237
msgid "Feedrate Probe"
msgstr "Feedrate Probe"

#: flatcamGUI/ObjectUI.py:918 flatcamGUI/ObjectUI.py:1520
#: flatcamGUI/PreferencesUI.py:2407 flatcamGUI/PreferencesUI.py:3239
msgid "The feedrate used while the probe is probing."
msgstr "The feedrate used while the probe is probing."

#: flatcamGUI/ObjectUI.py:938
msgid ""
"Select from the Tools Table above\n"
"the hole dias that are to be drilled.\n"
"Use the # column to make the selection."
msgstr ""
"Select from the Tools Table above\n"
"the hole dias that are to be drilled.\n"
"Use the # column to make the selection."

#: flatcamGUI/ObjectUI.py:945 flatcamGUI/PreferencesUI.py:2264
msgid "Gcode"
msgstr "Gcode"

#: flatcamGUI/ObjectUI.py:947
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."

#: flatcamGUI/ObjectUI.py:961
msgid "Create Drills GCode"
msgstr "Create Drills GCode"

#: flatcamGUI/ObjectUI.py:963
msgid "Generate the CNC Job."
msgstr "Generate the CNC Job."

#: flatcamGUI/ObjectUI.py:968 flatcamGUI/PreferencesUI.py:2282
msgid "Mill Holes"
msgstr "Mill Holes"

#: flatcamGUI/ObjectUI.py:970 flatcamGUI/PreferencesUI.py:2284
msgid "Create Geometry for milling holes."
msgstr "Create Geometry for milling holes."

#: flatcamGUI/ObjectUI.py:975
msgid ""
"Select from the Tools Table above\n"
"the hole dias that are to be milled.\n"
"Use the # column to make the selection."
msgstr ""
"Select from the Tools Table above\n"
"the hole dias that are to be milled.\n"
"Use the # column to make the selection."

#: flatcamGUI/ObjectUI.py:981 flatcamGUI/PreferencesUI.py:2288
msgid "Drill Tool dia"
msgstr "Drill Tool dia"

#: flatcamGUI/ObjectUI.py:983 flatcamGUI/PreferencesUI.py:1303
#: flatcamGUI/PreferencesUI.py:2290
msgid "Diameter of the cutting tool."
msgstr "Diameter of the cutting tool."

#: flatcamGUI/ObjectUI.py:990
msgid "Mill Drills Geo"
msgstr "Mill Drills Geo"

#: flatcamGUI/ObjectUI.py:992
msgid ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."

#: flatcamGUI/ObjectUI.py:1000 flatcamGUI/PreferencesUI.py:2299
msgid "Slot Tool dia"
msgstr "Slot Tool dia"

#: flatcamGUI/ObjectUI.py:1002 flatcamGUI/PreferencesUI.py:2301
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr ""
"Diameter of the cutting tool\n"
"when milling slots."

#: flatcamGUI/ObjectUI.py:1011
msgid "Mill Slots Geo"
msgstr "Mill Slots Geo"

#: flatcamGUI/ObjectUI.py:1013
msgid ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."

#: flatcamGUI/ObjectUI.py:1034
msgid "Geometry Object"
msgstr "Geometry Object"

#: flatcamGUI/ObjectUI.py:1066
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."

#: flatcamGUI/ObjectUI.py:1083 flatcamGUI/ObjectUI.py:1696
#: flatcamGUI/PreferencesUI.py:3376
msgid "Plot Object"
msgstr "Plot Object"

#: flatcamGUI/ObjectUI.py:1097 flatcamGUI/ObjectUI.py:1709
msgid "Dia"
msgstr "Dia"

#: flatcamGUI/ObjectUI.py:1097 flatcamGUI/ObjectUI.py:1709
#: flatcamTools/ToolNonCopperClear.py:120 flatcamTools/ToolPaint.py:123
msgid "TT"
msgstr "TT"

#: flatcamGUI/ObjectUI.py:1104
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"

#: flatcamGUI/ObjectUI.py:1115
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."

#: flatcamGUI/ObjectUI.py:1122
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."
msgstr ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."

#: flatcamGUI/ObjectUI.py:1131
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."

#: flatcamGUI/ObjectUI.py:1143
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."
msgstr ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."

#: flatcamGUI/ObjectUI.py:1156
msgid "Tool Offset"
msgstr "Tool Offset"

#: flatcamGUI/ObjectUI.py:1159
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."

#: flatcamGUI/ObjectUI.py:1205 flatcamTools/ToolNonCopperClear.py:260
#: flatcamTools/ToolPaint.py:190
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."

#: flatcamGUI/ObjectUI.py:1213
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: flatcamGUI/ObjectUI.py:1221
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: flatcamGUI/ObjectUI.py:1237
msgid "Tool Data"
msgstr "Tool Data"

#: flatcamGUI/ObjectUI.py:1240
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."

#: flatcamGUI/ObjectUI.py:1305 flatcamGUI/PreferencesUI.py:2982
msgid "Multi-Depth"
msgstr "Multi-Depth"

#: flatcamGUI/ObjectUI.py:1308 flatcamGUI/PreferencesUI.py:2985
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."
msgstr ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."

#: flatcamGUI/ObjectUI.py:1322
msgid "Depth of each pass (positive)."
msgstr "Depth of each pass (positive)."

#: flatcamGUI/ObjectUI.py:1333 flatcamGUI/PreferencesUI.py:3017
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
"Height of the tool when\n"
"moving without cutting."

#: flatcamGUI/ObjectUI.py:1355 flatcamGUI/PreferencesUI.py:3033
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."

#: flatcamGUI/ObjectUI.py:1395 flatcamGUI/PreferencesUI.py:3074
msgid "Feed Rate X-Y"
msgstr "Feed Rate X-Y"

#: flatcamGUI/ObjectUI.py:1397 flatcamGUI/PreferencesUI.py:3076
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute"

#: flatcamGUI/ObjectUI.py:1409 flatcamGUI/PreferencesUI.py:3089
msgid "Feed Rate Z"
msgstr "Feed Rate Z"

#: flatcamGUI/ObjectUI.py:1411 flatcamGUI/PreferencesUI.py:3091
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."

#: flatcamGUI/ObjectUI.py:1424 flatcamGUI/PreferencesUI.py:3194
msgid "Feed Rate Rapids"
msgstr "Feed Rate Rapids"

#: flatcamGUI/ObjectUI.py:1426 flatcamGUI/PreferencesUI.py:3196
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/ObjectUI.py:1444 flatcamGUI/PreferencesUI.py:3212
msgid "Re-cut 1st pt."
msgstr "Re-cut 1st pt."

#: flatcamGUI/ObjectUI.py:1446 flatcamGUI/PreferencesUI.py:3214
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."

#: flatcamGUI/ObjectUI.py:1457 flatcamGUI/PreferencesUI.py:3108
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."
msgstr ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."

#: flatcamGUI/ObjectUI.py:1489 flatcamGUI/PreferencesUI.py:5077
#: flatcamTools/ToolSolderPaste.py:275
msgid "PostProcessor"
msgstr "PostProcessor"

#: flatcamGUI/ObjectUI.py:1491 flatcamGUI/PreferencesUI.py:3142
msgid ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."

#: flatcamGUI/ObjectUI.py:1535
msgid ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."

#: flatcamGUI/ObjectUI.py:1542
msgid "Generate"
msgstr "Generate"

#: flatcamGUI/ObjectUI.py:1544
msgid "Generate the CNC Job object."
msgstr "Generate the CNC Job object."

#: flatcamGUI/ObjectUI.py:1551
msgid "Paint Area"
msgstr "Paint Area"

#: flatcamGUI/ObjectUI.py:1554 flatcamGUI/PreferencesUI.py:4145
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."
msgstr ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."

#: flatcamGUI/ObjectUI.py:1565
msgid "Launch Paint Tool in Tools Tab."
msgstr "Launch Paint Tool in Tools Tab."

#: flatcamGUI/ObjectUI.py:1581
msgid "CNC Job Object"
msgstr "CNC Job Object"

#: flatcamGUI/ObjectUI.py:1591 flatcamGUI/PreferencesUI.py:3381
msgid "Plot kind"
msgstr "Plot kind"

#: flatcamGUI/ObjectUI.py:1594 flatcamGUI/PreferencesUI.py:3383
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."

#: flatcamGUI/ObjectUI.py:1603 flatcamGUI/PreferencesUI.py:3391
msgid "Travel"
msgstr "Travel"

#: flatcamGUI/ObjectUI.py:1607 flatcamGUI/PreferencesUI.py:3400
msgid "Display Annotation"
msgstr "Display Annotation"

#: flatcamGUI/ObjectUI.py:1609 flatcamGUI/PreferencesUI.py:3402
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."

#: flatcamGUI/ObjectUI.py:1624
msgid "Travelled dist."
msgstr "Travelled dist."

#: flatcamGUI/ObjectUI.py:1626 flatcamGUI/ObjectUI.py:1631
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."

#: flatcamGUI/ObjectUI.py:1636
msgid "Estimated time"
msgstr "Estimated time"

#: flatcamGUI/ObjectUI.py:1638 flatcamGUI/ObjectUI.py:1643
msgid ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."
msgstr ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."

#: flatcamGUI/ObjectUI.py:1678
msgid "CNC Tools Table"
msgstr "CNC Tools Table"

#: flatcamGUI/ObjectUI.py:1681
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."

#: flatcamGUI/ObjectUI.py:1710
msgid "P"
msgstr "P"

#: flatcamGUI/ObjectUI.py:1722
msgid "Update Plot"
msgstr "Update Plot"

#: flatcamGUI/ObjectUI.py:1724
msgid "Update the plot."
msgstr "Update the plot."

#: flatcamGUI/ObjectUI.py:1731 flatcamGUI/PreferencesUI.py:3551
msgid "Export CNC Code"
msgstr "Export CNC Code"

#: flatcamGUI/ObjectUI.py:1733 flatcamGUI/PreferencesUI.py:3502
#: flatcamGUI/PreferencesUI.py:3553
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
"Export and save G-Code to\n"
"make this object to a file."

#: flatcamGUI/ObjectUI.py:1739
msgid "Prepend to CNC Code"
msgstr "Prepend to CNC Code"

#: flatcamGUI/ObjectUI.py:1741 flatcamGUI/PreferencesUI.py:3518
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."

#: flatcamGUI/ObjectUI.py:1750
msgid "Append to CNC Code"
msgstr "Append to CNC Code"

#: flatcamGUI/ObjectUI.py:1752 flatcamGUI/PreferencesUI.py:3530
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"

#: flatcamGUI/ObjectUI.py:1769 flatcamGUI/PreferencesUI.py:3559
msgid "Toolchange G-Code"
msgstr "Toolchange G-Code"

#: flatcamGUI/ObjectUI.py:1772 flatcamGUI/PreferencesUI.py:3562
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."

#: flatcamGUI/ObjectUI.py:1791 flatcamGUI/PreferencesUI.py:3590
msgid "Use Toolchange Macro"
msgstr "Use Toolchange Macro"

#: flatcamGUI/ObjectUI.py:1793 flatcamGUI/PreferencesUI.py:3592
msgid ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."
msgstr ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."

#: flatcamGUI/ObjectUI.py:1801 flatcamGUI/PreferencesUI.py:3604
msgid ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"
msgstr ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"

#: flatcamGUI/ObjectUI.py:1808 flatcamGUI/PreferencesUI.py:1662
#: flatcamGUI/PreferencesUI.py:2613 flatcamGUI/PreferencesUI.py:3319
#: flatcamGUI/PreferencesUI.py:3611 flatcamGUI/PreferencesUI.py:3692
#: flatcamGUI/PreferencesUI.py:3967 flatcamGUI/PreferencesUI.py:4079
#: flatcamGUI/PreferencesUI.py:4302 flatcamGUI/PreferencesUI.py:4500
#: flatcamGUI/PreferencesUI.py:4749 flatcamGUI/PreferencesUI.py:4924
#: flatcamGUI/PreferencesUI.py:5097 flatcamGUI/PreferencesUI.py:5119
#: flatcamGUI/PreferencesUI.py:5343 flatcamTools/ToolNonCopperClear.py:287
msgid "Parameters"
msgstr "Parameters"

#: flatcamGUI/ObjectUI.py:1811 flatcamGUI/PreferencesUI.py:3614
msgid "FlatCAM CNC parameters"
msgstr "FlatCAM CNC parameters"

#: flatcamGUI/ObjectUI.py:1812 flatcamGUI/PreferencesUI.py:3615
msgid "tool number"
msgstr "tool number"

#: flatcamGUI/ObjectUI.py:1813 flatcamGUI/PreferencesUI.py:3616
msgid "tool diameter"
msgstr "tool diameter"

#: flatcamGUI/ObjectUI.py:1814 flatcamGUI/PreferencesUI.py:3617
msgid "for Excellon, total number of drills"
msgstr "for Excellon, total number of drills"

#: flatcamGUI/ObjectUI.py:1816 flatcamGUI/PreferencesUI.py:3619
msgid "X coord for Toolchange"
msgstr "X coord for Toolchange"

#: flatcamGUI/ObjectUI.py:1817
msgid "Y coord for Toolchange"
msgstr "Y coord for Toolchange"

#: flatcamGUI/ObjectUI.py:1818 flatcamGUI/PreferencesUI.py:3622
msgid "Z coord for Toolchange"
msgstr "Z coord for Toolchange"

#: flatcamGUI/ObjectUI.py:1819
msgid "depth where to cut"
msgstr "depth where to cut"

#: flatcamGUI/ObjectUI.py:1820
msgid "height where to travel"
msgstr "height where to travel"

#: flatcamGUI/ObjectUI.py:1821 flatcamGUI/PreferencesUI.py:3625
msgid "the step value for multidepth cut"
msgstr "the step value for multidepth cut"

#: flatcamGUI/ObjectUI.py:1823 flatcamGUI/PreferencesUI.py:3627
msgid "the value for the spindle speed"
msgstr "the value for the spindle speed"

#: flatcamGUI/ObjectUI.py:1825
msgid "time to dwell to allow the spindle to reach it's set RPM"
msgstr "time to dwell to allow the spindle to reach it's set RPM"

#: flatcamGUI/ObjectUI.py:1841
msgid "View CNC Code"
msgstr "View CNC Code"

#: flatcamGUI/ObjectUI.py:1843
msgid ""
"Opens TAB to view/modify/print G-Code\n"
"file."
msgstr ""
"Opens TAB to view/modify/print G-Code\n"
"file."

#: flatcamGUI/ObjectUI.py:1848
msgid "Save CNC Code"
msgstr "Save CNC Code"

#: flatcamGUI/ObjectUI.py:1850
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
"Opens dialog to save G-Code\n"
"file."

#: flatcamGUI/ObjectUI.py:1870
msgid "Script Object"
msgstr "Script Object"

#: flatcamGUI/ObjectUI.py:1889 flatcamGUI/ObjectUI.py:1948
msgid "Auto Completer"
msgstr "Auto Completer"

#: flatcamGUI/ObjectUI.py:1891
msgid "This selects if the auto completer is enabled in the Script Editor."
msgstr "This selects if the auto completer is enabled in the Script Editor."

#: flatcamGUI/ObjectUI.py:1922
msgid "Document Object"
msgstr "Document Object"

#: flatcamGUI/ObjectUI.py:1950
msgid "This selects if the auto completer is enabled in the Document Editor."
msgstr "This selects if the auto completer is enabled in the Document Editor."

#: flatcamGUI/ObjectUI.py:1968
msgid "Font Type"
msgstr "Font Type"

#: flatcamGUI/ObjectUI.py:1985
msgid "Font Size"
msgstr "Font Size"

#: flatcamGUI/ObjectUI.py:2021
msgid "Alignment"
msgstr "Alignment"

#: flatcamGUI/ObjectUI.py:2026
msgid "Align Left"
msgstr "Align Left"

#: flatcamGUI/ObjectUI.py:2031
msgid "Center"
msgstr "Center"

#: flatcamGUI/ObjectUI.py:2036
msgid "Align Right"
msgstr "Align Right"

#: flatcamGUI/ObjectUI.py:2041
msgid "Justify"
msgstr "Justify"

#: flatcamGUI/ObjectUI.py:2048
msgid "Font Color"
msgstr "Font Color"

#: flatcamGUI/ObjectUI.py:2050
msgid "Set the font color for the selected text"
msgstr "Set the font color for the selected text"

#: flatcamGUI/ObjectUI.py:2064
msgid "Selection Color"
msgstr "Selection Color"

#: flatcamGUI/ObjectUI.py:2066
msgid "Set the selection color when doing text selection."
msgstr "Set the selection color when doing text selection."

#: flatcamGUI/ObjectUI.py:2080
msgid "Tab Size"
msgstr "Tab Size"

#: flatcamGUI/ObjectUI.py:2082
msgid "Set the tab size. In pixels. Default value is 80 pixels."
msgstr "Set the tab size. In pixels. Default value is 80 pixels."

#: flatcamGUI/PlotCanvasLegacy.py:1082
msgid ""
"Could not annotate due of a difference between the number of text elements "
"and the number of text positions."
msgstr ""
"Could not annotate due of a difference between the number of text elements "
"and the number of text positions."

#: flatcamGUI/PreferencesUI.py:295
msgid "GUI Preferences"
msgstr "GUI Preferences"

#: flatcamGUI/PreferencesUI.py:301
msgid "Grid X value"
msgstr "Grid X value"

#: flatcamGUI/PreferencesUI.py:303
msgid "This is the Grid snap value on X axis."
msgstr "This is the Grid snap value on X axis."

#: flatcamGUI/PreferencesUI.py:310
msgid "Grid Y value"
msgstr "Grid Y value"

#: flatcamGUI/PreferencesUI.py:312
msgid "This is the Grid snap value on Y axis."
msgstr "This is the Grid snap value on Y axis."

#: flatcamGUI/PreferencesUI.py:319
msgid "Snap Max"
msgstr "Snap Max"

#: flatcamGUI/PreferencesUI.py:326
msgid "Workspace"
msgstr "Workspace"

#: flatcamGUI/PreferencesUI.py:328
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."

#: flatcamGUI/PreferencesUI.py:331
msgid "Wk. format"
msgstr "Wk. format"

#: flatcamGUI/PreferencesUI.py:333
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."

#: flatcamGUI/PreferencesUI.py:346
msgid "Plot Fill"
msgstr "Plot Fill"

#: flatcamGUI/PreferencesUI.py:348
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/PreferencesUI.py:362 flatcamGUI/PreferencesUI.py:411
#: flatcamGUI/PreferencesUI.py:460
msgid "Alpha Level"
msgstr "Alpha Level"

#: flatcamGUI/PreferencesUI.py:364
msgid "Set the fill transparency for plotted objects."
msgstr "Set the fill transparency for plotted objects."

#: flatcamGUI/PreferencesUI.py:380
msgid "Plot Line"
msgstr "Plot Line"

#: flatcamGUI/PreferencesUI.py:382
msgid "Set the line color for plotted objects."
msgstr "Set the line color for plotted objects."

#: flatcamGUI/PreferencesUI.py:394
msgid "Sel. Fill"
msgstr "Sel. Fill"

#: flatcamGUI/PreferencesUI.py:396
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/PreferencesUI.py:413
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr "Set the fill transparency for the 'left to right' selection box."

#: flatcamGUI/PreferencesUI.py:429
msgid "Sel. Line"
msgstr "Sel. Line"

#: flatcamGUI/PreferencesUI.py:431
msgid "Set the line color for the 'left to right' selection box."
msgstr "Set the line color for the 'left to right' selection box."

#: flatcamGUI/PreferencesUI.py:443
msgid "Sel2. Fill"
msgstr "Sel2. Fill"

#: flatcamGUI/PreferencesUI.py:445
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/PreferencesUI.py:462
msgid "Set the fill transparency for selection 'right to left' box."
msgstr "Set the fill transparency for selection 'right to left' box."

#: flatcamGUI/PreferencesUI.py:478
msgid "Sel2. Line"
msgstr "Sel2. Line"

#: flatcamGUI/PreferencesUI.py:480
msgid "Set the line color for the 'right to left' selection box."
msgstr "Set the line color for the 'right to left' selection box."

#: flatcamGUI/PreferencesUI.py:492
msgid "Editor Draw"
msgstr "Editor Draw"

#: flatcamGUI/PreferencesUI.py:494
msgid "Set the color for the shape."
msgstr "Set the color for the shape."

#: flatcamGUI/PreferencesUI.py:506
msgid "Editor Draw Sel."
msgstr "Editor Draw Sel."

#: flatcamGUI/PreferencesUI.py:508
msgid "Set the color of the shape when selected."
msgstr "Set the color of the shape when selected."

#: flatcamGUI/PreferencesUI.py:520
msgid "Project Items"
msgstr "Project Items"

#: flatcamGUI/PreferencesUI.py:522
msgid "Set the color of the items in Project Tab Tree."
msgstr "Set the color of the items in Project Tab Tree."

#: flatcamGUI/PreferencesUI.py:533
msgid "Proj. Dis. Items"
msgstr "Proj. Dis. Items"

#: flatcamGUI/PreferencesUI.py:535
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."

#: flatcamGUI/PreferencesUI.py:548
msgid "Activity Icon"
msgstr "Activity Icon"

#: flatcamGUI/PreferencesUI.py:550
msgid "Select the GIF that show activity when FlatCAM is active."
msgstr "Select the GIF that show activity when FlatCAM is active."

#: flatcamGUI/PreferencesUI.py:596
msgid "GUI Settings"
msgstr "GUI Settings"

#: flatcamGUI/PreferencesUI.py:609
msgid "Theme"
msgstr "Theme"

#: flatcamGUI/PreferencesUI.py:611
msgid ""
"Select a theme for FlatCAM.\n"
"The application will restart after change."
msgstr ""
"Select a theme for FlatCAM.\n"
"The application will restart after change."

#: flatcamGUI/PreferencesUI.py:615
msgid "Light"
msgstr "Light"

#: flatcamGUI/PreferencesUI.py:616
msgid "Dark"
msgstr "Dark"

#: flatcamGUI/PreferencesUI.py:623
msgid "Layout"
msgstr "Layout"

#: flatcamGUI/PreferencesUI.py:625
msgid ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."
msgstr ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."

#: flatcamGUI/PreferencesUI.py:644
msgid "Style"
msgstr "Style"

#: flatcamGUI/PreferencesUI.py:646
msgid ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."

#: flatcamGUI/PreferencesUI.py:660
msgid "HDPI Support"
msgstr "HDPI Support"

#: flatcamGUI/PreferencesUI.py:662
msgid ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."

#: flatcamGUI/PreferencesUI.py:678 flatcamGUI/PreferencesUI.py:928
msgid "Clear GUI Settings"
msgstr "Clear GUI Settings"

#: flatcamGUI/PreferencesUI.py:680
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."

#: flatcamGUI/PreferencesUI.py:690
msgid "Hover Shape"
msgstr "Hover Shape"

#: flatcamGUI/PreferencesUI.py:692
msgid ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."

#: flatcamGUI/PreferencesUI.py:702
msgid "Sel. Shape"
msgstr "Sel. Shape"

#: flatcamGUI/PreferencesUI.py:704
msgid ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."

#: flatcamGUI/PreferencesUI.py:717
msgid "NB Font Size"
msgstr "NB Font Size"

#: flatcamGUI/PreferencesUI.py:719
msgid ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."
msgstr ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."

#: flatcamGUI/PreferencesUI.py:738
msgid "Axis Font Size"
msgstr "Axis Font Size"

#: flatcamGUI/PreferencesUI.py:740
msgid "This sets the font size for canvas axis."
msgstr "This sets the font size for canvas axis."

#: flatcamGUI/PreferencesUI.py:757
msgid "Textbox Font Size"
msgstr "Textbox Font Size"

#: flatcamGUI/PreferencesUI.py:759
msgid ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in FlatCAM."
msgstr ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in FlatCAM."

#: flatcamGUI/PreferencesUI.py:780
msgid "Splash Screen"
msgstr "Splash Screen"

#: flatcamGUI/PreferencesUI.py:782
msgid "Enable display of the splash screen at application startup."
msgstr "Enable display of the splash screen at application startup."

#: flatcamGUI/PreferencesUI.py:795
msgid "Sys Tray Icon"
msgstr "Sys Tray Icon"

#: flatcamGUI/PreferencesUI.py:797
msgid "Enable display of FlatCAM icon in Sys Tray."
msgstr "Enable display of FlatCAM icon in Sys Tray."

#: flatcamGUI/PreferencesUI.py:805
msgid "Shell at StartUp"
msgstr "Shell at StartUp"

#: flatcamGUI/PreferencesUI.py:807 flatcamGUI/PreferencesUI.py:812
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""
"Check this box if you want the shell to\n"
"start automatically at startup."

#: flatcamGUI/PreferencesUI.py:820
msgid "Project at StartUp"
msgstr "Project at StartUp"

#: flatcamGUI/PreferencesUI.py:822 flatcamGUI/PreferencesUI.py:827
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."

#: flatcamGUI/PreferencesUI.py:835
msgid "Project AutoHide"
msgstr "Project AutoHide"

#: flatcamGUI/PreferencesUI.py:837 flatcamGUI/PreferencesUI.py:843
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."

#: flatcamGUI/PreferencesUI.py:854
msgid "Enable ToolTips"
msgstr "Enable ToolTips"

#: flatcamGUI/PreferencesUI.py:856 flatcamGUI/PreferencesUI.py:861
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."

#: flatcamGUI/PreferencesUI.py:869
msgid "Mouse Cursor"
msgstr "Mouse Cursor"

#: flatcamGUI/PreferencesUI.py:871
msgid ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"
msgstr ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"

#: flatcamGUI/PreferencesUI.py:877
msgid "Small"
msgstr "Small"

#: flatcamGUI/PreferencesUI.py:878
msgid "Big"
msgstr "Big"

#: flatcamGUI/PreferencesUI.py:884
msgid "Mouse Cursor Size"
msgstr "Mouse Cursor Size"

#: flatcamGUI/PreferencesUI.py:886
msgid "Set the size of the mouse cursor, in pixels."
msgstr "Set the size of the mouse cursor, in pixels."

#: flatcamGUI/PreferencesUI.py:897
msgid "Delete object confirmation"
msgstr "Delete object confirmation"

#: flatcamGUI/PreferencesUI.py:899
msgid ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."
msgstr ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."

#: flatcamGUI/PreferencesUI.py:925
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr "Are you sure you want to delete the GUI Settings? \n"

#: flatcamGUI/PreferencesUI.py:949
msgid "App Preferences"
msgstr "App Preferences"

#: flatcamGUI/PreferencesUI.py:958 flatcamGUI/PreferencesUI.py:1241
#: flatcamGUI/PreferencesUI.py:1575 flatcamGUI/PreferencesUI.py:2476
#: flatcamTools/ToolDistance.py:47 flatcamTools/ToolDistanceMin.py:48
#: flatcamTools/ToolPcbWizard.py:126 flatcamTools/ToolProperties.py:138
msgid "Units"
msgstr "Units"

#: flatcamGUI/PreferencesUI.py:959
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."
msgstr ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."

#: flatcamGUI/PreferencesUI.py:962
msgid "IN"
msgstr "IN"

#: flatcamGUI/PreferencesUI.py:963 flatcamGUI/PreferencesUI.py:1247
#: flatcamGUI/PreferencesUI.py:1581 flatcamGUI/PreferencesUI.py:2035
#: flatcamGUI/PreferencesUI.py:2482 flatcamTools/ToolCalculators.py:62
#: flatcamTools/ToolPcbWizard.py:125
msgid "MM"
msgstr "MM"

#: flatcamGUI/PreferencesUI.py:969
msgid "Graphic Engine"
msgstr "Graphic Engine"

#: flatcamGUI/PreferencesUI.py:970
msgid ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced "
"compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."
msgstr ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced "
"compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."

#: flatcamGUI/PreferencesUI.py:976
msgid "Legacy(2D)"
msgstr "Legacy(2D)"

#: flatcamGUI/PreferencesUI.py:977
msgid "OpenGL(3D)"
msgstr "OpenGL(3D)"

#: flatcamGUI/PreferencesUI.py:984
msgid "APP. LEVEL"
msgstr "APP. LEVEL"

#: flatcamGUI/PreferencesUI.py:985
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."

#: flatcamGUI/PreferencesUI.py:997
msgid "Portable app"
msgstr "Portable app"

#: flatcamGUI/PreferencesUI.py:998
msgid ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."
msgstr ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."

#: flatcamGUI/PreferencesUI.py:1008
msgid "Languages"
msgstr "Languages"

#: flatcamGUI/PreferencesUI.py:1009
msgid "Set the language used throughout FlatCAM."
msgstr "Set the language used throughout FlatCAM."

#: flatcamGUI/PreferencesUI.py:1015
msgid "Apply Language"
msgstr "Apply Language"

#: flatcamGUI/PreferencesUI.py:1016
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."
msgstr ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."

#: flatcamGUI/PreferencesUI.py:1028
msgid "Version Check"
msgstr "Version Check"

#: flatcamGUI/PreferencesUI.py:1030 flatcamGUI/PreferencesUI.py:1035
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""
"Check this box if you want to check\n"
"for a new version automatically at startup."

#: flatcamGUI/PreferencesUI.py:1043
msgid "Send Stats"
msgstr "Send Stats"

#: flatcamGUI/PreferencesUI.py:1045 flatcamGUI/PreferencesUI.py:1050
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."

#: flatcamGUI/PreferencesUI.py:1060
msgid "Pan Button"
msgstr "Pan Button"

#: flatcamGUI/PreferencesUI.py:1061
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"

#: flatcamGUI/PreferencesUI.py:1064
msgid "MMB"
msgstr "MMB"

#: flatcamGUI/PreferencesUI.py:1065
msgid "RMB"
msgstr "RMB"

#: flatcamGUI/PreferencesUI.py:1071
msgid "Multiple Sel"
msgstr "Multiple Sel"

#: flatcamGUI/PreferencesUI.py:1072
msgid "Select the key used for multiple selection."
msgstr "Select the key used for multiple selection."

#: flatcamGUI/PreferencesUI.py:1073
msgid "CTRL"
msgstr "CTRL"

#: flatcamGUI/PreferencesUI.py:1074
msgid "SHIFT"
msgstr "SHIFT"

#: flatcamGUI/PreferencesUI.py:1080
msgid "Workers number"
msgstr "Workers number"

#: flatcamGUI/PreferencesUI.py:1082 flatcamGUI/PreferencesUI.py:1091
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."

#: flatcamGUI/PreferencesUI.py:1104
msgid "Geo Tolerance"
msgstr "Geo Tolerance"

#: flatcamGUI/PreferencesUI.py:1106 flatcamGUI/PreferencesUI.py:1115
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."

#: flatcamGUI/PreferencesUI.py:1130
msgid "\"Open\" behavior"
msgstr "\"Open\" behavior"

#: flatcamGUI/PreferencesUI.py:1132
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."

#: flatcamGUI/PreferencesUI.py:1141
msgid "Save Compressed Project"
msgstr "Save Compressed Project"

#: flatcamGUI/PreferencesUI.py:1143
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."

#: flatcamGUI/PreferencesUI.py:1152
msgid "Compression"
msgstr "Compression"

#: flatcamGUI/PreferencesUI.py:1154
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."

#: flatcamGUI/PreferencesUI.py:1165
msgid "Bookmarks limit"
msgstr "Bookmarks limit"

#: flatcamGUI/PreferencesUI.py:1167
msgid ""
"The maximum number of bookmarks that may be installed in the menu.\n"
"The number of bookmarks in the bookmark manager may be greater\n"
"but the menu will hold only so much."
msgstr ""
"The maximum number of bookmarks that may be installed in the menu.\n"
"The number of bookmarks in the bookmark manager may be greater\n"
"but the menu will hold only so much."

#: flatcamGUI/PreferencesUI.py:1187
msgid "Gerber General"
msgstr "Gerber General"

#: flatcamGUI/PreferencesUI.py:1218 flatcamGUI/PreferencesUI.py:2917
#: flatcamGUI/PreferencesUI.py:3416
msgid "Circle Steps"
msgstr "Circle Steps"

#: flatcamGUI/PreferencesUI.py:1220
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."

#: flatcamGUI/PreferencesUI.py:1232
msgid "Default Values"
msgstr "Default Values"

#: flatcamGUI/PreferencesUI.py:1234
msgid ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."
msgstr ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."

#: flatcamGUI/PreferencesUI.py:1243 flatcamGUI/PreferencesUI.py:1249
#: flatcamGUI/PreferencesUI.py:1577 flatcamGUI/PreferencesUI.py:1583
msgid "The units used in the Gerber file."
msgstr "The units used in the Gerber file."

#: flatcamGUI/PreferencesUI.py:1246 flatcamGUI/PreferencesUI.py:1580
#: flatcamGUI/PreferencesUI.py:1936 flatcamGUI/PreferencesUI.py:2034
#: flatcamGUI/PreferencesUI.py:2481 flatcamTools/ToolCalculators.py:61
#: flatcamTools/ToolPcbWizard.py:124
msgid "INCH"
msgstr "INCH"

#: flatcamGUI/PreferencesUI.py:1256 flatcamGUI/PreferencesUI.py:1629
#: flatcamGUI/PreferencesUI.py:2549
msgid "Zeros"
msgstr "Zeros"

#: flatcamGUI/PreferencesUI.py:1259 flatcamGUI/PreferencesUI.py:1269
#: flatcamGUI/PreferencesUI.py:1632 flatcamGUI/PreferencesUI.py:1642
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."

#: flatcamGUI/PreferencesUI.py:1266 flatcamGUI/PreferencesUI.py:1639
#: flatcamGUI/PreferencesUI.py:2010 flatcamGUI/PreferencesUI.py:2559
#: flatcamTools/ToolPcbWizard.py:110
msgid "LZ"
msgstr "LZ"

#: flatcamGUI/PreferencesUI.py:1267 flatcamGUI/PreferencesUI.py:1640
#: flatcamGUI/PreferencesUI.py:2011 flatcamGUI/PreferencesUI.py:2560
#: flatcamTools/ToolPcbWizard.py:111
msgid "TZ"
msgstr "TZ"

#: flatcamGUI/PreferencesUI.py:1287
msgid "Gerber Options"
msgstr "Gerber Options"

#: flatcamGUI/PreferencesUI.py:1430
msgid "Gerber Adv. Options"
msgstr "Gerber Adv. Options"

#: flatcamGUI/PreferencesUI.py:1433 flatcamGUI/PreferencesUI.py:2335
#: flatcamGUI/PreferencesUI.py:3163
msgid "Advanced Options"
msgstr "Advanced Options"

#: flatcamGUI/PreferencesUI.py:1435
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/PreferencesUI.py:1454
msgid "Table Show/Hide"
msgstr "Table Show/Hide"

#: flatcamGUI/PreferencesUI.py:1456
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/PreferencesUI.py:1518
msgid ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: flatcamGUI/PreferencesUI.py:1523 flatcamGUI/PreferencesUI.py:4478
#: flatcamTools/ToolFilm.py:232 flatcamTools/ToolProperties.py:303
#: flatcamTools/ToolProperties.py:317 flatcamTools/ToolProperties.py:320
#: flatcamTools/ToolProperties.py:323
msgid "None"
msgstr "None"

#: flatcamGUI/PreferencesUI.py:1524
msgid "Full"
msgstr "Full"

#: flatcamGUI/PreferencesUI.py:1529
msgid "Simplify"
msgstr "Simplify"

#: flatcamGUI/PreferencesUI.py:1531
msgid ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: flatcamGUI/PreferencesUI.py:1538
msgid "Tolerance"
msgstr "Tolerance"

#: flatcamGUI/PreferencesUI.py:1539
msgid "Tolerance for polygon simplification."
msgstr "Tolerance for polygon simplification."

#: flatcamGUI/PreferencesUI.py:1561
msgid "Gerber Export"
msgstr "Gerber Export"

#: flatcamGUI/PreferencesUI.py:1564 flatcamGUI/PreferencesUI.py:2465
msgid "Export Options"
msgstr "Export Options"

#: flatcamGUI/PreferencesUI.py:1566
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."

#: flatcamGUI/PreferencesUI.py:1589 flatcamGUI/PreferencesUI.py:2490
msgid "Int/Decimals"
msgstr "Int/Decimals"

#: flatcamGUI/PreferencesUI.py:1591
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."

#: flatcamGUI/PreferencesUI.py:1604
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."

#: flatcamGUI/PreferencesUI.py:1620
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."

#: flatcamGUI/PreferencesUI.py:1664
msgid "A list of Gerber Editor parameters."
msgstr "A list of Gerber Editor parameters."

#: flatcamGUI/PreferencesUI.py:1672 flatcamGUI/PreferencesUI.py:2623
#: flatcamGUI/PreferencesUI.py:3329
msgid "Selection limit"
msgstr "Selection limit"

#: flatcamGUI/PreferencesUI.py:1674
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/PreferencesUI.py:1687
msgid "New Aperture code"
msgstr "New Aperture code"

#: flatcamGUI/PreferencesUI.py:1700
msgid "New Aperture size"
msgstr "New Aperture size"

#: flatcamGUI/PreferencesUI.py:1702
msgid "Size for the new aperture"
msgstr "Size for the new aperture"

#: flatcamGUI/PreferencesUI.py:1713
msgid "New Aperture type"
msgstr "New Aperture type"

#: flatcamGUI/PreferencesUI.py:1715
msgid ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."
msgstr ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."

#: flatcamGUI/PreferencesUI.py:1738
msgid "Aperture Dimensions"
msgstr "Aperture Dimensions"

#: flatcamGUI/PreferencesUI.py:1740 flatcamGUI/PreferencesUI.py:2935
#: flatcamGUI/PreferencesUI.py:3704
msgid "Diameters of the cutting tools, separated by ','"
msgstr "Diameters of the cutting tools, separated by ','"

#: flatcamGUI/PreferencesUI.py:1746
msgid "Linear Pad Array"
msgstr "Linear Pad Array"

#: flatcamGUI/PreferencesUI.py:1750 flatcamGUI/PreferencesUI.py:2667
#: flatcamGUI/PreferencesUI.py:2815
msgid "Linear Direction"
msgstr "Linear Direction"

#: flatcamGUI/PreferencesUI.py:1790
msgid "Circular Pad Array"
msgstr "Circular Pad Array"

#: flatcamGUI/PreferencesUI.py:1794 flatcamGUI/PreferencesUI.py:2713
#: flatcamGUI/PreferencesUI.py:2863
msgid "Circular Direction"
msgstr "Circular Direction"

#: flatcamGUI/PreferencesUI.py:1796 flatcamGUI/PreferencesUI.py:2715
#: flatcamGUI/PreferencesUI.py:2865
msgid ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."
msgstr ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."

#: flatcamGUI/PreferencesUI.py:1807 flatcamGUI/PreferencesUI.py:2726
#: flatcamGUI/PreferencesUI.py:2876
msgid "Circular Angle"
msgstr "Circular Angle"

#: flatcamGUI/PreferencesUI.py:1826
msgid "Distance at which to buffer the Gerber element."
msgstr "Distance at which to buffer the Gerber element."

#: flatcamGUI/PreferencesUI.py:1836
msgid "Scale Tool"
msgstr "Scale Tool"

#: flatcamGUI/PreferencesUI.py:1842
msgid "Factor to scale the Gerber element."
msgstr "Factor to scale the Gerber element."

#: flatcamGUI/PreferencesUI.py:1855
msgid "Threshold low"
msgstr "Threshold low"

#: flatcamGUI/PreferencesUI.py:1857
msgid "Threshold value under which the apertures are not marked."
msgstr "Threshold value under which the apertures are not marked."

#: flatcamGUI/PreferencesUI.py:1867
msgid "Threshold high"
msgstr "Threshold high"

#: flatcamGUI/PreferencesUI.py:1869
msgid "Threshold value over which the apertures are not marked."
msgstr "Threshold value over which the apertures are not marked."

#: flatcamGUI/PreferencesUI.py:1887
msgid "Excellon General"
msgstr "Excellon General"

#: flatcamGUI/PreferencesUI.py:1909
msgid "Excellon Format"
msgstr "Excellon Format"

#: flatcamGUI/PreferencesUI.py:1911
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"

#: flatcamGUI/PreferencesUI.py:1939
msgid "Default values for INCH are 2:4"
msgstr "Default values for INCH are 2:4"

#: flatcamGUI/PreferencesUI.py:1946 flatcamGUI/PreferencesUI.py:1977
#: flatcamGUI/PreferencesUI.py:2504
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."

#: flatcamGUI/PreferencesUI.py:1959 flatcamGUI/PreferencesUI.py:1990
#: flatcamGUI/PreferencesUI.py:2517
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."

#: flatcamGUI/PreferencesUI.py:1967
msgid "METRIC"
msgstr "METRIC"

#: flatcamGUI/PreferencesUI.py:1970
msgid "Default values for METRIC are 3:3"
msgstr "Default values for METRIC are 3:3"

#: flatcamGUI/PreferencesUI.py:1999
msgid "Default <b>Zeros</b>"
msgstr "Default <b>Zeros</b>"

#: flatcamGUI/PreferencesUI.py:2002 flatcamGUI/PreferencesUI.py:2552
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/PreferencesUI.py:2013
msgid ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/PreferencesUI.py:2023
msgid "Default <b>Units</b>"
msgstr "Default <b>Units</b>"

#: flatcamGUI/PreferencesUI.py:2026
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: flatcamGUI/PreferencesUI.py:2037
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: flatcamGUI/PreferencesUI.py:2043
msgid "Update Export settings"
msgstr "Update Export settings"

#: flatcamGUI/PreferencesUI.py:2051
msgid "Excellon Optimization"
msgstr "Excellon Optimization"

#: flatcamGUI/PreferencesUI.py:2054
msgid "Algorithm:"
msgstr "Algorithm:"

#: flatcamGUI/PreferencesUI.py:2056 flatcamGUI/PreferencesUI.py:2073
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"If this control is disabled, then FlatCAM works in 32bit mode and it uses\n"
"Travelling Salesman algorithm for path optimization."
msgstr ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"If this control is disabled, then FlatCAM works in 32bit mode and it uses\n"
"Travelling Salesman algorithm for path optimization."

#: flatcamGUI/PreferencesUI.py:2068
msgid "MetaHeuristic"
msgstr "MetaHeuristic"

#: flatcamGUI/PreferencesUI.py:2070
msgid "TSA"
msgstr "TSA"

#: flatcamGUI/PreferencesUI.py:2085
msgid "Optimization Time"
msgstr "Optimization Time"

#: flatcamGUI/PreferencesUI.py:2088
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."

#: flatcamGUI/PreferencesUI.py:2131
msgid "Excellon Options"
msgstr "Excellon Options"

#: flatcamGUI/PreferencesUI.py:2136
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object."

#: flatcamGUI/PreferencesUI.py:2180 flatcamGUI/PreferencesUI.py:3042
msgid "Toolchange Z"
msgstr "Toolchange Z"

#: flatcamGUI/PreferencesUI.py:2221
msgid "Spindle Speed"
msgstr "Spindle Speed"

#: flatcamGUI/PreferencesUI.py:2236 flatcamGUI/PreferencesUI.py:3123
msgid "Duration"
msgstr "Duration"

#: flatcamGUI/PreferencesUI.py:2266
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."

#: flatcamGUI/PreferencesUI.py:2316
msgid "Defaults"
msgstr "Defaults"

#: flatcamGUI/PreferencesUI.py:2329
msgid "Excellon Adv. Options"
msgstr "Excellon Adv. Options"

#: flatcamGUI/PreferencesUI.py:2337
msgid ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/PreferencesUI.py:2358
msgid "Toolchange X,Y"
msgstr "Toolchange X,Y"

#: flatcamGUI/PreferencesUI.py:2360 flatcamGUI/PreferencesUI.py:3177
msgid "Toolchange X,Y position."
msgstr "Toolchange X,Y position."

#: flatcamGUI/PreferencesUI.py:2417 flatcamGUI/PreferencesUI.py:3251
msgid "Spindle dir."
msgstr "Spindle dir."

#: flatcamGUI/PreferencesUI.py:2419 flatcamGUI/PreferencesUI.py:3253
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"

#: flatcamGUI/PreferencesUI.py:2430 flatcamGUI/PreferencesUI.py:3265
msgid "Fast Plunge"
msgstr "Fast Plunge"

#: flatcamGUI/PreferencesUI.py:2432 flatcamGUI/PreferencesUI.py:3267
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."

#: flatcamGUI/PreferencesUI.py:2441
msgid "Fast Retract"
msgstr "Fast Retract"

#: flatcamGUI/PreferencesUI.py:2443
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."

#: flatcamGUI/PreferencesUI.py:2462
msgid "Excellon Export"
msgstr "Excellon Export"

#: flatcamGUI/PreferencesUI.py:2467
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."

#: flatcamGUI/PreferencesUI.py:2478 flatcamGUI/PreferencesUI.py:2484
msgid "The units used in the Excellon file."
msgstr "The units used in the Excellon file."

#: flatcamGUI/PreferencesUI.py:2492
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."

#: flatcamGUI/PreferencesUI.py:2526
msgid "Format"
msgstr "Format"

#: flatcamGUI/PreferencesUI.py:2528 flatcamGUI/PreferencesUI.py:2538
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."

#: flatcamGUI/PreferencesUI.py:2535
msgid "Decimal"
msgstr "Decimal"

#: flatcamGUI/PreferencesUI.py:2536
msgid "No-Decimal"
msgstr "No-Decimal"

#: flatcamGUI/PreferencesUI.py:2562
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/PreferencesUI.py:2572
msgid "Slot type"
msgstr "Slot type"

#: flatcamGUI/PreferencesUI.py:2575 flatcamGUI/PreferencesUI.py:2585
msgid ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."
msgstr ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."

#: flatcamGUI/PreferencesUI.py:2582
msgid "Routed"
msgstr "Routed"

#: flatcamGUI/PreferencesUI.py:2583
msgid "Drilled(G85)"
msgstr "Drilled(G85)"

#: flatcamGUI/PreferencesUI.py:2615
msgid "A list of Excellon Editor parameters."
msgstr "A list of Excellon Editor parameters."

#: flatcamGUI/PreferencesUI.py:2625
msgid ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/PreferencesUI.py:2638
msgid "New Tool Dia"
msgstr "New Tool Dia"

#: flatcamGUI/PreferencesUI.py:2663
msgid "Linear Drill Array"
msgstr "Linear Drill Array"

#: flatcamGUI/PreferencesUI.py:2709
msgid "Circular Drill Array"
msgstr "Circular Drill Array"

#: flatcamGUI/PreferencesUI.py:2798
msgid "Linear Slot Array"
msgstr "Linear Slot Array"

#: flatcamGUI/PreferencesUI.py:2859
msgid "Circular Slot Array"
msgstr "Circular Slot Array"

#: flatcamGUI/PreferencesUI.py:2898
msgid "Geometry General"
msgstr "Geometry General"

#: flatcamGUI/PreferencesUI.py:2919
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."

#: flatcamGUI/PreferencesUI.py:2950
msgid "Geometry Options"
msgstr "Geometry Options"

#: flatcamGUI/PreferencesUI.py:2957
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."

#: flatcamGUI/PreferencesUI.py:2994
msgid "Depth/Pass"
msgstr "Depth/Pass"

#: flatcamGUI/PreferencesUI.py:2996
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."

#: flatcamGUI/PreferencesUI.py:3158
msgid "Geometry Adv. Options"
msgstr "Geometry Adv. Options"

#: flatcamGUI/PreferencesUI.py:3165
msgid ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/PreferencesUI.py:3175 flatcamGUI/PreferencesUI.py:5000
#: flatcamTools/ToolSolderPaste.py:206
msgid "Toolchange X-Y"
msgstr "Toolchange X-Y"

#: flatcamGUI/PreferencesUI.py:3186
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/PreferencesUI.py:3277
msgid "Seg. X size"
msgstr "Seg. X size"

#: flatcamGUI/PreferencesUI.py:3279
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."

#: flatcamGUI/PreferencesUI.py:3293
msgid "Seg. Y size"
msgstr "Seg. Y size"

#: flatcamGUI/PreferencesUI.py:3295
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."

#: flatcamGUI/PreferencesUI.py:3316
msgid "Geometry Editor"
msgstr "Geometry Editor"

#: flatcamGUI/PreferencesUI.py:3321
msgid "A list of Geometry Editor parameters."
msgstr "A list of Geometry Editor parameters."

#: flatcamGUI/PreferencesUI.py:3331
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/PreferencesUI.py:3363
msgid "CNC Job General"
msgstr "CNC Job General"

#: flatcamGUI/PreferencesUI.py:3418
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."

#: flatcamGUI/PreferencesUI.py:3427
msgid "Travel dia"
msgstr "Travel dia"

#: flatcamGUI/PreferencesUI.py:3429
msgid ""
"The width of the travel lines to be\n"
"rendered in the plot."
msgstr ""
"The width of the travel lines to be\n"
"rendered in the plot."

#: flatcamGUI/PreferencesUI.py:3445
msgid "Coordinates decimals"
msgstr "Coordinates decimals"

#: flatcamGUI/PreferencesUI.py:3447
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"

#: flatcamGUI/PreferencesUI.py:3458
msgid "Feedrate decimals"
msgstr "Feedrate decimals"

#: flatcamGUI/PreferencesUI.py:3460
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"

#: flatcamGUI/PreferencesUI.py:3471
msgid "Coordinates type"
msgstr "Coordinates type"

#: flatcamGUI/PreferencesUI.py:3473
msgid ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"
msgstr ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"

#: flatcamGUI/PreferencesUI.py:3479
msgid "Absolute G90"
msgstr "Absolute G90"

#: flatcamGUI/PreferencesUI.py:3480
msgid "Incremental G91"
msgstr "Incremental G91"

#: flatcamGUI/PreferencesUI.py:3497
msgid "CNC Job Options"
msgstr "CNC Job Options"

#: flatcamGUI/PreferencesUI.py:3500
msgid "Export G-Code"
msgstr "Export G-Code"

#: flatcamGUI/PreferencesUI.py:3516
msgid "Prepend to G-Code"
msgstr "Prepend to G-Code"

#: flatcamGUI/PreferencesUI.py:3528
msgid "Append to G-Code"
msgstr "Append to G-Code"

#: flatcamGUI/PreferencesUI.py:3548
msgid "CNC Job Adv. Options"
msgstr "CNC Job Adv. Options"

#: flatcamGUI/PreferencesUI.py:3620
msgid "y_toolchange = Y coord for Toolchange"
msgstr "y_toolchange = Y coord for Toolchange"

#: flatcamGUI/PreferencesUI.py:3623
msgid "Z depth for the cut"
msgstr "Z depth for the cut"

#: flatcamGUI/PreferencesUI.py:3624
msgid "Z height for travel"
msgstr "Z height for travel"

#: flatcamGUI/PreferencesUI.py:3630
msgid "dwelltime = time to dwell to allow the spindle to reach it's set RPM"
msgstr "dwelltime = time to dwell to allow the spindle to reach it's set RPM"

#: flatcamGUI/PreferencesUI.py:3649
msgid "Annotation Size"
msgstr "Annotation Size"

#: flatcamGUI/PreferencesUI.py:3651
msgid "The font size of the annotation text. In pixels."
msgstr "The font size of the annotation text. In pixels."

#: flatcamGUI/PreferencesUI.py:3661
msgid "Annotation Color"
msgstr "Annotation Color"

#: flatcamGUI/PreferencesUI.py:3663
msgid "Set the font color for the annotation texts."
msgstr "Set the font color for the annotation texts."

#: flatcamGUI/PreferencesUI.py:3689
msgid "NCC Tool Options"
msgstr "NCC Tool Options"

#: flatcamGUI/PreferencesUI.py:3702 flatcamGUI/PreferencesUI.py:4935
msgid "Tools dia"
msgstr "Tools dia"

#: flatcamGUI/PreferencesUI.py:3713 flatcamGUI/PreferencesUI.py:3721
#: flatcamTools/ToolNonCopperClear.py:210
#: flatcamTools/ToolNonCopperClear.py:218
msgid ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"
msgstr ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"

#: flatcamGUI/PreferencesUI.py:3718 flatcamTools/ToolNonCopperClear.py:215
msgid "V-shape"
msgstr "V-shape"

#: flatcamGUI/PreferencesUI.py:3758 flatcamGUI/PreferencesUI.py:3766
#: flatcamTools/ToolNonCopperClear.py:162
#: flatcamTools/ToolNonCopperClear.py:170
msgid ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: flatcamGUI/PreferencesUI.py:3775 flatcamGUI/PreferencesUI.py:4167
#: flatcamTools/ToolNonCopperClear.py:176 flatcamTools/ToolPaint.py:153
msgid "Tool order"
msgstr "Tool order"

#: flatcamGUI/PreferencesUI.py:3776 flatcamGUI/PreferencesUI.py:3786
#: flatcamGUI/PreferencesUI.py:4168 flatcamGUI/PreferencesUI.py:4178
#: flatcamTools/ToolNonCopperClear.py:177
#: flatcamTools/ToolNonCopperClear.py:187 flatcamTools/ToolPaint.py:154
#: flatcamTools/ToolPaint.py:164
msgid ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> menas that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."
msgstr ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> menas that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."

#: flatcamGUI/PreferencesUI.py:3784 flatcamGUI/PreferencesUI.py:4176
#: flatcamTools/ToolNonCopperClear.py:185 flatcamTools/ToolPaint.py:162
msgid "Forward"
msgstr "Forward"

#: flatcamGUI/PreferencesUI.py:3785 flatcamGUI/PreferencesUI.py:4177
#: flatcamTools/ToolNonCopperClear.py:186 flatcamTools/ToolPaint.py:163
msgid "Reverse"
msgstr "Reverse"

#: flatcamGUI/PreferencesUI.py:3798 flatcamGUI/PreferencesUI.py:3807
#: flatcamTools/ToolNonCopperClear.py:293
#: flatcamTools/ToolNonCopperClear.py:301
msgid ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."
msgstr ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."

#: flatcamGUI/PreferencesUI.py:3817 flatcamTools/ToolNonCopperClear.py:310
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: flatcamGUI/PreferencesUI.py:3838 flatcamTools/ToolNonCopperClear.py:330
msgid "Bounding box margin."
msgstr "Bounding box margin."

#: flatcamGUI/PreferencesUI.py:3851 flatcamGUI/PreferencesUI.py:4227
#: flatcamTools/ToolNonCopperClear.py:341
msgid ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."
msgstr ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."

#: flatcamGUI/PreferencesUI.py:3865 flatcamGUI/PreferencesUI.py:4241
#: flatcamTools/ToolNonCopperClear.py:355 flatcamTools/ToolPaint.py:269
msgid "Connect"
msgstr "Connect"

#: flatcamGUI/PreferencesUI.py:3875 flatcamGUI/PreferencesUI.py:4251
#: flatcamTools/ToolNonCopperClear.py:364 flatcamTools/ToolPaint.py:278
msgid "Contour"
msgstr "Contour"

#: flatcamGUI/PreferencesUI.py:3885 flatcamTools/ToolNonCopperClear.py:373
#: flatcamTools/ToolPaint.py:287
msgid "Rest M."
msgstr "Rest M."

#: flatcamGUI/PreferencesUI.py:3887 flatcamTools/ToolNonCopperClear.py:375
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."

#: flatcamGUI/PreferencesUI.py:3902 flatcamGUI/PreferencesUI.py:3914
#: flatcamTools/ToolNonCopperClear.py:390
#: flatcamTools/ToolNonCopperClear.py:402
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."
msgstr ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."

#: flatcamGUI/PreferencesUI.py:3912 flatcamTools/ToolNonCopperClear.py:400
msgid "Offset value"
msgstr "Offset value"

#: flatcamGUI/PreferencesUI.py:3929 flatcamTools/ToolNonCopperClear.py:426
msgid "Itself"
msgstr "Itself"

#: flatcamGUI/PreferencesUI.py:3930 flatcamGUI/PreferencesUI.py:4272
msgid "Area"
msgstr "Area"

#: flatcamGUI/PreferencesUI.py:3931
msgid "Ref"
msgstr "Ref"

#: flatcamGUI/PreferencesUI.py:3932 flatcamGUI/PreferencesUI.py:4451
#: flatcamTools/ToolFilm.py:202
msgid "Reference"
msgstr "Reference"

#: flatcamGUI/PreferencesUI.py:3934 flatcamTools/ToolNonCopperClear.py:432
msgid ""
"- 'Itself' -  the non copper clearing extent\n"
"is based on the object that is copper cleared.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"- 'Itself' -  the non copper clearing extent\n"
"is based on the object that is copper cleared.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."

#: flatcamGUI/PreferencesUI.py:3945 flatcamGUI/PreferencesUI.py:4280
msgid "Normal"
msgstr "Normal"

#: flatcamGUI/PreferencesUI.py:3946 flatcamGUI/PreferencesUI.py:4281
msgid "Progressive"
msgstr "Progressive"

#: flatcamGUI/PreferencesUI.py:3947
msgid "NCC Plotting"
msgstr "NCC Plotting"

#: flatcamGUI/PreferencesUI.py:3949
msgid ""
"- 'Normal' -  normal plotting, done at the end of the NCC job\n"
"- 'Progressive' - after each shape is generated it will be plotted."
msgstr ""
"- 'Normal' -  normal plotting, done at the end of the NCC job\n"
"- 'Progressive' - after each shape is generated it will be plotted."

#: flatcamGUI/PreferencesUI.py:3963
msgid "Cutout Tool Options"
msgstr "Cutout Tool Options"

#: flatcamGUI/PreferencesUI.py:3980 flatcamTools/ToolCutOut.py:114
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."

#: flatcamGUI/PreferencesUI.py:3992 flatcamTools/ToolCutOut.py:95
msgid "Obj kind"
msgstr "Obj kind"

#: flatcamGUI/PreferencesUI.py:3994 flatcamTools/ToolCutOut.py:97
msgid ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."
msgstr ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."

#: flatcamGUI/PreferencesUI.py:4001 flatcamGUI/PreferencesUI.py:4271
#: flatcamTools/ToolCutOut.py:103
msgid "Single"
msgstr "Single"

#: flatcamGUI/PreferencesUI.py:4002 flatcamTools/ToolCutOut.py:104
msgid "Panel"
msgstr "Panel"

#: flatcamGUI/PreferencesUI.py:4008 flatcamTools/ToolCutOut.py:125
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"

#: flatcamGUI/PreferencesUI.py:4020
msgid "Gap size"
msgstr "Gap size"

#: flatcamGUI/PreferencesUI.py:4022 flatcamTools/ToolCutOut.py:137
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."

#: flatcamGUI/PreferencesUI.py:4035 flatcamTools/ToolCutOut.py:173
msgid "Gaps"
msgstr "Gaps"

#: flatcamGUI/PreferencesUI.py:4037
msgid ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: flatcamGUI/PreferencesUI.py:4059 flatcamTools/ToolCutOut.py:154
msgid "Convex Sh."
msgstr "Convex Sh."

#: flatcamGUI/PreferencesUI.py:4061 flatcamTools/ToolCutOut.py:156
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."

#: flatcamGUI/PreferencesUI.py:4075
msgid "2Sided Tool Options"
msgstr "2Sided Tool Options"

#: flatcamGUI/PreferencesUI.py:4081
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."

#: flatcamGUI/PreferencesUI.py:4095 flatcamTools/ToolDblSided.py:247
msgid "Drill dia"
msgstr "Drill dia"

#: flatcamGUI/PreferencesUI.py:4097 flatcamTools/ToolDblSided.py:238
#: flatcamTools/ToolDblSided.py:249
msgid "Diameter of the drill for the alignment holes."
msgstr "Diameter of the drill for the alignment holes."

#: flatcamGUI/PreferencesUI.py:4106 flatcamTools/ToolDblSided.py:128
msgid "Mirror Axis:"
msgstr "Mirror Axis:"

#: flatcamGUI/PreferencesUI.py:4108 flatcamTools/ToolDblSided.py:130
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr "Mirror vertically (X) or horizontally (Y)."

#: flatcamGUI/PreferencesUI.py:4117 flatcamTools/ToolDblSided.py:139
msgid "Point"
msgstr "Point"

#: flatcamGUI/PreferencesUI.py:4118 flatcamTools/ToolDblSided.py:140
msgid "Box"
msgstr "Box"

#: flatcamGUI/PreferencesUI.py:4119
msgid "Axis Ref"
msgstr "Axis Ref"

#: flatcamGUI/PreferencesUI.py:4121 flatcamTools/ToolDblSided.py:143
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."
msgstr ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."

#: flatcamGUI/PreferencesUI.py:4137
msgid "Paint Tool Options"
msgstr "Paint Tool Options"

#: flatcamGUI/PreferencesUI.py:4143
msgid "<b>Parameters:</b>"
msgstr "<b>Parameters:</b>"

#: flatcamGUI/PreferencesUI.py:4261 flatcamTools/ToolPaint.py:302
msgid "Selection"
msgstr "Selection"

#: flatcamGUI/PreferencesUI.py:4263 flatcamTools/ToolPaint.py:304
#: flatcamTools/ToolPaint.py:320
msgid ""
"How to select Polygons to be painted.\n"
"\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"How to select Polygons to be painted.\n"
"\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."

#: flatcamGUI/PreferencesUI.py:4274
msgid "Ref."
msgstr "Ref."

#: flatcamGUI/PreferencesUI.py:4282
msgid "Paint Plotting"
msgstr "Paint Plotting"

#: flatcamGUI/PreferencesUI.py:4284
msgid ""
"- 'Normal' -  normal plotting, done at the end of the Paint job\n"
"- 'Progressive' - after each shape is generated it will be plotted."
msgstr ""
"- 'Normal' -  normal plotting, done at the end of the Paint job\n"
"- 'Progressive' - after each shape is generated it will be plotted."

#: flatcamGUI/PreferencesUI.py:4298
msgid "Film Tool Options"
msgstr "Film Tool Options"

#: flatcamGUI/PreferencesUI.py:4304
msgid ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."
msgstr ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."

#: flatcamGUI/PreferencesUI.py:4315
msgid "Film Type"
msgstr "Film Type"

#: flatcamGUI/PreferencesUI.py:4317 flatcamTools/ToolFilm.py:270
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."

#: flatcamGUI/PreferencesUI.py:4328
msgid "Film Color"
msgstr "Film Color"

#: flatcamGUI/PreferencesUI.py:4330
msgid "Set the film color when positive film is selected."
msgstr "Set the film color when positive film is selected."

#: flatcamGUI/PreferencesUI.py:4353 flatcamTools/ToolFilm.py:286
msgid "Border"
msgstr "Border"

#: flatcamGUI/PreferencesUI.py:4355 flatcamTools/ToolFilm.py:288
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."

#: flatcamGUI/PreferencesUI.py:4372 flatcamTools/ToolFilm.py:253
msgid "Scale Stroke"
msgstr "Scale Stroke"

#: flatcamGUI/PreferencesUI.py:4374 flatcamTools/ToolFilm.py:255
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."

#: flatcamGUI/PreferencesUI.py:4381 flatcamTools/ToolFilm.py:130
msgid "Film Adjustments"
msgstr "Film Adjustments"

#: flatcamGUI/PreferencesUI.py:4383 flatcamTools/ToolFilm.py:132
msgid ""
"Sometime the printers will distort the print shape, especially the Laser "
"types.\n"
"This section provide the tools to compensate for the print distortions."
msgstr ""
"Sometime the printers will distort the print shape, especially the Laser "
"types.\n"
"This section provide the tools to compensate for the print distortions."

#: flatcamGUI/PreferencesUI.py:4390 flatcamTools/ToolFilm.py:139
msgid "Scale Film geometry"
msgstr "Scale Film geometry"

#: flatcamGUI/PreferencesUI.py:4392 flatcamTools/ToolFilm.py:141
msgid ""
"A value greater than 1 will stretch the film\n"
"while a value less than 1 will jolt it."
msgstr ""
"A value greater than 1 will stretch the film\n"
"while a value less than 1 will jolt it."

#: flatcamGUI/PreferencesUI.py:4402 flatcamGUI/PreferencesUI.py:4821
#: flatcamTools/ToolFilm.py:151 flatcamTools/ToolTransform.py:147
msgid "X factor"
msgstr "X factor"

#: flatcamGUI/PreferencesUI.py:4411 flatcamGUI/PreferencesUI.py:4834
#: flatcamTools/ToolFilm.py:160 flatcamTools/ToolTransform.py:168
msgid "Y factor"
msgstr "Y factor"

#: flatcamGUI/PreferencesUI.py:4421 flatcamTools/ToolFilm.py:172
msgid "Skew Film geometry"
msgstr "Skew Film geometry"

#: flatcamGUI/PreferencesUI.py:4423 flatcamTools/ToolFilm.py:174
msgid ""
"Positive values will skew to the right\n"
"while negative values will skew to the left."
msgstr ""
"Positive values will skew to the right\n"
"while negative values will skew to the left."

#: flatcamGUI/PreferencesUI.py:4433 flatcamGUI/PreferencesUI.py:4790
#: flatcamTools/ToolFilm.py:184 flatcamTools/ToolTransform.py:97
msgid "X angle"
msgstr "X angle"

#: flatcamGUI/PreferencesUI.py:4442 flatcamGUI/PreferencesUI.py:4804
#: flatcamTools/ToolFilm.py:193 flatcamTools/ToolTransform.py:119
msgid "Y angle"
msgstr "Y angle"

#: flatcamGUI/PreferencesUI.py:4453 flatcamTools/ToolFilm.py:204
msgid ""
"The reference point to be used as origin for the skew.\n"
"It can be one of the four points of the geometry bounding box."
msgstr ""
"The reference point to be used as origin for the skew.\n"
"It can be one of the four points of the geometry bounding box."

#: flatcamGUI/PreferencesUI.py:4456 flatcamTools/ToolFilm.py:207
msgid "Bottom Left"
msgstr "Bottom Left"

#: flatcamGUI/PreferencesUI.py:4457 flatcamTools/ToolFilm.py:208
msgid "Top Left"
msgstr "Top Left"

#: flatcamGUI/PreferencesUI.py:4458 flatcamTools/ToolFilm.py:209
msgid "Bottom Right"
msgstr "Bottom Right"

#: flatcamGUI/PreferencesUI.py:4459 flatcamTools/ToolFilm.py:210
msgid "Top right"
msgstr "Top right"

#: flatcamGUI/PreferencesUI.py:4467 flatcamTools/ToolFilm.py:221
msgid "Mirror Film geometry"
msgstr "Mirror Film geometry"

#: flatcamGUI/PreferencesUI.py:4469 flatcamTools/ToolFilm.py:223
msgid "Mirror the film geometry on the selected axis or on both."
msgstr "Mirror the film geometry on the selected axis or on both."

#: flatcamGUI/PreferencesUI.py:4481 flatcamTools/ToolFilm.py:235
msgid "Both"
msgstr "Both"

#: flatcamGUI/PreferencesUI.py:4483 flatcamTools/ToolFilm.py:237
msgid "Mirror axis"
msgstr "Mirror axis"

#: flatcamGUI/PreferencesUI.py:4496
msgid "Panelize Tool Options"
msgstr "Panelize Tool Options"

#: flatcamGUI/PreferencesUI.py:4502
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."

#: flatcamGUI/PreferencesUI.py:4517 flatcamTools/ToolPanelize.py:159
msgid "Spacing cols"
msgstr "Spacing cols"

#: flatcamGUI/PreferencesUI.py:4519 flatcamTools/ToolPanelize.py:161
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between columns of the desired panel.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:4531 flatcamTools/ToolPanelize.py:171
msgid "Spacing rows"
msgstr "Spacing rows"

#: flatcamGUI/PreferencesUI.py:4533 flatcamTools/ToolPanelize.py:173
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between rows of the desired panel.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:4544 flatcamTools/ToolPanelize.py:182
msgid "Columns"
msgstr "Columns"

#: flatcamGUI/PreferencesUI.py:4546 flatcamTools/ToolPanelize.py:184
msgid "Number of columns of the desired panel"
msgstr "Number of columns of the desired panel"

#: flatcamGUI/PreferencesUI.py:4556 flatcamTools/ToolPanelize.py:192
msgid "Rows"
msgstr "Rows"

#: flatcamGUI/PreferencesUI.py:4558 flatcamTools/ToolPanelize.py:194
msgid "Number of rows of the desired panel"
msgstr "Number of rows of the desired panel"

#: flatcamGUI/PreferencesUI.py:4564 flatcamTools/ToolPanelize.py:200
msgid "Gerber"
msgstr "Gerber"

#: flatcamGUI/PreferencesUI.py:4565 flatcamTools/ToolPanelize.py:201
msgid "Geo"
msgstr "Geo"

#: flatcamGUI/PreferencesUI.py:4566 flatcamTools/ToolPanelize.py:202
msgid "Panel Type"
msgstr "Panel Type"

#: flatcamGUI/PreferencesUI.py:4568
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"

#: flatcamGUI/PreferencesUI.py:4577
msgid "Constrain within"
msgstr "Constrain within"

#: flatcamGUI/PreferencesUI.py:4579 flatcamTools/ToolPanelize.py:214
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."

#: flatcamGUI/PreferencesUI.py:4592 flatcamTools/ToolPanelize.py:226
msgid "Width (DX)"
msgstr "Width (DX)"

#: flatcamGUI/PreferencesUI.py:4594 flatcamTools/ToolPanelize.py:228
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""
"The width (DX) within which the panel must fit.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:4605 flatcamTools/ToolPanelize.py:237
msgid "Height (DY)"
msgstr "Height (DY)"

#: flatcamGUI/PreferencesUI.py:4607 flatcamTools/ToolPanelize.py:239
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""
"The height (DY)within which the panel must fit.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:4621
msgid "Calculators Tool Options"
msgstr "Calculators Tool Options"

#: flatcamGUI/PreferencesUI.py:4625 flatcamTools/ToolCalculators.py:25
msgid "V-Shape Tool Calculator"
msgstr "V-Shape Tool Calculator"

#: flatcamGUI/PreferencesUI.py:4627
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."

#: flatcamGUI/PreferencesUI.py:4642 flatcamTools/ToolCalculators.py:94
msgid "Tip Diameter"
msgstr "Tip Diameter"

#: flatcamGUI/PreferencesUI.py:4644 flatcamTools/ToolCalculators.py:100
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."

#: flatcamGUI/PreferencesUI.py:4656 flatcamTools/ToolCalculators.py:103
msgid "Tip Angle"
msgstr "Tip Angle"

#: flatcamGUI/PreferencesUI.py:4658
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."

#: flatcamGUI/PreferencesUI.py:4672
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."

#: flatcamGUI/PreferencesUI.py:4679 flatcamTools/ToolCalculators.py:27
msgid "ElectroPlating Calculator"
msgstr "ElectroPlating Calculator"

#: flatcamGUI/PreferencesUI.py:4681 flatcamTools/ToolCalculators.py:154
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."
msgstr ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."

#: flatcamGUI/PreferencesUI.py:4695 flatcamTools/ToolCalculators.py:163
msgid "Board Length"
msgstr "Board Length"

#: flatcamGUI/PreferencesUI.py:4697 flatcamTools/ToolCalculators.py:168
msgid "This is the board length. In centimeters."
msgstr "This is the board length. In centimeters."

#: flatcamGUI/PreferencesUI.py:4707 flatcamTools/ToolCalculators.py:170
msgid "Board Width"
msgstr "Board Width"

#: flatcamGUI/PreferencesUI.py:4709 flatcamTools/ToolCalculators.py:175
msgid "This is the board width.In centimeters."
msgstr "This is the board width.In centimeters."

#: flatcamGUI/PreferencesUI.py:4714 flatcamTools/ToolCalculators.py:177
msgid "Current Density"
msgstr "Current Density"

#: flatcamGUI/PreferencesUI.py:4720 flatcamTools/ToolCalculators.py:182
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."

#: flatcamGUI/PreferencesUI.py:4726 flatcamTools/ToolCalculators.py:185
msgid "Copper Growth"
msgstr "Copper Growth"

#: flatcamGUI/PreferencesUI.py:4732 flatcamTools/ToolCalculators.py:190
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""
"How thick the copper growth is intended to be.\n"
"In microns."

#: flatcamGUI/PreferencesUI.py:4745
msgid "Transform Tool Options"
msgstr "Transform Tool Options"

#: flatcamGUI/PreferencesUI.py:4751
msgid ""
"Various transformations that can be applied\n"
"on a FlatCAM object."
msgstr ""
"Various transformations that can be applied\n"
"on a FlatCAM object."

#: flatcamGUI/PreferencesUI.py:4782
msgid "Skew"
msgstr "Skew"

#: flatcamGUI/PreferencesUI.py:4823 flatcamTools/ToolTransform.py:149
msgid "Factor for scaling on X axis."
msgstr "Factor for scaling on X axis."

#: flatcamGUI/PreferencesUI.py:4836 flatcamTools/ToolTransform.py:170
msgid "Factor for scaling on Y axis."
msgstr "Factor for scaling on Y axis."

#: flatcamGUI/PreferencesUI.py:4844 flatcamTools/ToolTransform.py:193
msgid ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."
msgstr ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."

#: flatcamGUI/PreferencesUI.py:4852 flatcamTools/ToolTransform.py:201
msgid ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."
msgstr ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."

#: flatcamGUI/PreferencesUI.py:4868 flatcamTools/ToolTransform.py:216
msgid "X val"
msgstr "X val"

#: flatcamGUI/PreferencesUI.py:4870 flatcamTools/ToolTransform.py:218
msgid "Distance to offset on X axis. In current units."
msgstr "Distance to offset on X axis. In current units."

#: flatcamGUI/PreferencesUI.py:4881 flatcamTools/ToolTransform.py:237
msgid "Y val"
msgstr "Y val"

#: flatcamGUI/PreferencesUI.py:4883 flatcamTools/ToolTransform.py:239
msgid "Distance to offset on Y axis. In current units."
msgstr "Distance to offset on Y axis. In current units."

#: flatcamGUI/PreferencesUI.py:4889 flatcamTools/ToolTransform.py:284
msgid "Mirror Reference"
msgstr "Mirror Reference"

#: flatcamGUI/PreferencesUI.py:4891 flatcamTools/ToolTransform.py:286
msgid ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: flatcamGUI/PreferencesUI.py:4902
msgid "Mirror Reference point"
msgstr "Mirror Reference point"

#: flatcamGUI/PreferencesUI.py:4904
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"

#: flatcamGUI/PreferencesUI.py:4921
msgid "SolderPaste Tool Options"
msgstr "SolderPaste Tool Options"

#: flatcamGUI/PreferencesUI.py:4926
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."

#: flatcamGUI/PreferencesUI.py:4937
msgid "Diameters of nozzle tools, separated by ','"
msgstr "Diameters of nozzle tools, separated by ','"

#: flatcamGUI/PreferencesUI.py:4944
msgid "New Nozzle Dia"
msgstr "New Nozzle Dia"

#: flatcamGUI/PreferencesUI.py:4946 flatcamTools/ToolSolderPaste.py:102
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr "Diameter for the new Nozzle tool to add in the Tool Table"

#: flatcamGUI/PreferencesUI.py:4954 flatcamTools/ToolSolderPaste.py:165
msgid "Z Dispense Start"
msgstr "Z Dispense Start"

#: flatcamGUI/PreferencesUI.py:4956 flatcamTools/ToolSolderPaste.py:167
msgid "The height (Z) when solder paste dispensing starts."
msgstr "The height (Z) when solder paste dispensing starts."

#: flatcamGUI/PreferencesUI.py:4963 flatcamTools/ToolSolderPaste.py:173
msgid "Z Dispense"
msgstr "Z Dispense"

#: flatcamGUI/PreferencesUI.py:4965 flatcamTools/ToolSolderPaste.py:175
msgid "The height (Z) when doing solder paste dispensing."
msgstr "The height (Z) when doing solder paste dispensing."

#: flatcamGUI/PreferencesUI.py:4972 flatcamTools/ToolSolderPaste.py:181
msgid "Z Dispense Stop"
msgstr "Z Dispense Stop"

#: flatcamGUI/PreferencesUI.py:4974 flatcamTools/ToolSolderPaste.py:183
msgid "The height (Z) when solder paste dispensing stops."
msgstr "The height (Z) when solder paste dispensing stops."

#: flatcamGUI/PreferencesUI.py:4981 flatcamTools/ToolSolderPaste.py:189
msgid "Z Travel"
msgstr "Z Travel"

#: flatcamGUI/PreferencesUI.py:4983 flatcamTools/ToolSolderPaste.py:191
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."

#: flatcamGUI/PreferencesUI.py:4991 flatcamTools/ToolSolderPaste.py:198
msgid "Z Toolchange"
msgstr "Z Toolchange"

#: flatcamGUI/PreferencesUI.py:4993 flatcamTools/ToolSolderPaste.py:200
msgid "The height (Z) for tool (nozzle) change."
msgstr "The height (Z) for tool (nozzle) change."

#: flatcamGUI/PreferencesUI.py:5002 flatcamTools/ToolSolderPaste.py:208
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."

#: flatcamGUI/PreferencesUI.py:5010 flatcamTools/ToolSolderPaste.py:215
msgid "Feedrate X-Y"
msgstr "Feedrate X-Y"

#: flatcamGUI/PreferencesUI.py:5012 flatcamTools/ToolSolderPaste.py:217
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr "Feedrate (speed) while moving on the X-Y plane."

#: flatcamGUI/PreferencesUI.py:5021 flatcamTools/ToolSolderPaste.py:225
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."

#: flatcamGUI/PreferencesUI.py:5029 flatcamTools/ToolSolderPaste.py:232
msgid "Feedrate Z Dispense"
msgstr "Feedrate Z Dispense"

#: flatcamGUI/PreferencesUI.py:5031
msgid ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."

#: flatcamGUI/PreferencesUI.py:5039 flatcamTools/ToolSolderPaste.py:241
msgid "Spindle Speed FWD"
msgstr "Spindle Speed FWD"

#: flatcamGUI/PreferencesUI.py:5041 flatcamTools/ToolSolderPaste.py:243
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."

#: flatcamGUI/PreferencesUI.py:5049 flatcamTools/ToolSolderPaste.py:250
msgid "Dwell FWD"
msgstr "Dwell FWD"

#: flatcamGUI/PreferencesUI.py:5051 flatcamTools/ToolSolderPaste.py:252
msgid "Pause after solder dispensing."
msgstr "Pause after solder dispensing."

#: flatcamGUI/PreferencesUI.py:5058 flatcamTools/ToolSolderPaste.py:258
msgid "Spindle Speed REV"
msgstr "Spindle Speed REV"

#: flatcamGUI/PreferencesUI.py:5060 flatcamTools/ToolSolderPaste.py:260
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."

#: flatcamGUI/PreferencesUI.py:5068 flatcamTools/ToolSolderPaste.py:267
msgid "Dwell REV"
msgstr "Dwell REV"

#: flatcamGUI/PreferencesUI.py:5070 flatcamTools/ToolSolderPaste.py:269
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."

#: flatcamGUI/PreferencesUI.py:5079 flatcamTools/ToolSolderPaste.py:277
msgid "Files that control the GCode generation."
msgstr "Files that control the GCode generation."

#: flatcamGUI/PreferencesUI.py:5094
msgid "Substractor Tool Options"
msgstr "Substractor Tool Options"

#: flatcamGUI/PreferencesUI.py:5099
msgid ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."
msgstr ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."

#: flatcamGUI/PreferencesUI.py:5104 flatcamTools/ToolSub.py:142
msgid "Close paths"
msgstr "Close paths"

#: flatcamGUI/PreferencesUI.py:5105
msgid ""
"Checking this will close the paths cut by the Geometry substractor object."
msgstr ""
"Checking this will close the paths cut by the Geometry substractor object."

#: flatcamGUI/PreferencesUI.py:5116
msgid "Check Rules Tool Options"
msgstr "Check Rules Tool Options"

#: flatcamGUI/PreferencesUI.py:5121
#| msgid ""
#| "A tool to check if Gerber files fir within a set\n"
#| "of Manufacturing Rules."
msgid ""
"A tool to check if Gerber files are within a set\n"
"of Manufacturing Rules."
msgstr ""
"A tool to check if Gerber files are within a set\n"
"of Manufacturing Rules."

#: flatcamGUI/PreferencesUI.py:5131 flatcamTools/ToolRulesCheck.py:256
#: flatcamTools/ToolRulesCheck.py:900
msgid "Trace Size"
msgstr "Trace Size"

#: flatcamGUI/PreferencesUI.py:5133 flatcamTools/ToolRulesCheck.py:258
msgid "This checks if the minimum size for traces is met."
msgstr "This checks if the minimum size for traces is met."

#: flatcamGUI/PreferencesUI.py:5143 flatcamGUI/PreferencesUI.py:5163
#: flatcamGUI/PreferencesUI.py:5183 flatcamGUI/PreferencesUI.py:5203
#: flatcamGUI/PreferencesUI.py:5223 flatcamGUI/PreferencesUI.py:5243
#: flatcamGUI/PreferencesUI.py:5263 flatcamGUI/PreferencesUI.py:5283
#: flatcamGUI/PreferencesUI.py:5305 flatcamGUI/PreferencesUI.py:5325
#: flatcamTools/ToolRulesCheck.py:268 flatcamTools/ToolRulesCheck.py:290
#: flatcamTools/ToolRulesCheck.py:313 flatcamTools/ToolRulesCheck.py:336
#: flatcamTools/ToolRulesCheck.py:359 flatcamTools/ToolRulesCheck.py:382
#: flatcamTools/ToolRulesCheck.py:405 flatcamTools/ToolRulesCheck.py:428
#: flatcamTools/ToolRulesCheck.py:453 flatcamTools/ToolRulesCheck.py:476
msgid "Min value"
msgstr "Min value"

#: flatcamGUI/PreferencesUI.py:5145 flatcamTools/ToolRulesCheck.py:270
msgid "Minimum acceptable trace size."
msgstr "Minimum acceptable trace size."

#: flatcamGUI/PreferencesUI.py:5150 flatcamTools/ToolRulesCheck.py:277
#: flatcamTools/ToolRulesCheck.py:1128 flatcamTools/ToolRulesCheck.py:1158
msgid "Copper to Copper clearance"
msgstr "Copper to Copper clearance"

#: flatcamGUI/PreferencesUI.py:5152 flatcamTools/ToolRulesCheck.py:279
msgid ""
"This checks if the minimum clearance between copper\n"
"features is met."
msgstr ""
"This checks if the minimum clearance between copper\n"
"features is met."

#: flatcamGUI/PreferencesUI.py:5165 flatcamGUI/PreferencesUI.py:5185
#: flatcamGUI/PreferencesUI.py:5205 flatcamGUI/PreferencesUI.py:5225
#: flatcamGUI/PreferencesUI.py:5245 flatcamGUI/PreferencesUI.py:5265
#: flatcamGUI/PreferencesUI.py:5327 flatcamTools/ToolRulesCheck.py:292
#: flatcamTools/ToolRulesCheck.py:315 flatcamTools/ToolRulesCheck.py:338
#: flatcamTools/ToolRulesCheck.py:361 flatcamTools/ToolRulesCheck.py:384
#: flatcamTools/ToolRulesCheck.py:407 flatcamTools/ToolRulesCheck.py:455
msgid "Minimum acceptable clearance value."
msgstr "Minimum acceptable clearance value."

#: flatcamGUI/PreferencesUI.py:5170 flatcamTools/ToolRulesCheck.py:300
#: flatcamTools/ToolRulesCheck.py:1188 flatcamTools/ToolRulesCheck.py:1194
#: flatcamTools/ToolRulesCheck.py:1207 flatcamTools/ToolRulesCheck.py:1214
msgid "Copper to Outline clearance"
msgstr "Copper to Outline clearance"

#: flatcamGUI/PreferencesUI.py:5172 flatcamTools/ToolRulesCheck.py:302
msgid ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."
msgstr ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."

#: flatcamGUI/PreferencesUI.py:5190 flatcamTools/ToolRulesCheck.py:323
msgid "Silk to Silk Clearance"
msgstr "Silk to Silk Clearance"

#: flatcamGUI/PreferencesUI.py:5192 flatcamTools/ToolRulesCheck.py:325
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."
msgstr ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."

#: flatcamGUI/PreferencesUI.py:5210 flatcamTools/ToolRulesCheck.py:346
#: flatcamTools/ToolRulesCheck.py:1297 flatcamTools/ToolRulesCheck.py:1303
#: flatcamTools/ToolRulesCheck.py:1321
msgid "Silk to Solder Mask Clearance"
msgstr "Silk to Solder Mask Clearance"

#: flatcamGUI/PreferencesUI.py:5212 flatcamTools/ToolRulesCheck.py:348
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."
msgstr ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."

#: flatcamGUI/PreferencesUI.py:5230 flatcamTools/ToolRulesCheck.py:369
#: flatcamTools/ToolRulesCheck.py:1351 flatcamTools/ToolRulesCheck.py:1357
#: flatcamTools/ToolRulesCheck.py:1371 flatcamTools/ToolRulesCheck.py:1378
msgid "Silk to Outline Clearance"
msgstr "Silk to Outline Clearance"

#: flatcamGUI/PreferencesUI.py:5232 flatcamTools/ToolRulesCheck.py:371
msgid ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."
msgstr ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."

#: flatcamGUI/PreferencesUI.py:5250 flatcamTools/ToolRulesCheck.py:392
#: flatcamTools/ToolRulesCheck.py:1389 flatcamTools/ToolRulesCheck.py:1416
msgid "Minimum Solder Mask Sliver"
msgstr "Minimum Solder Mask Sliver"

#: flatcamGUI/PreferencesUI.py:5252 flatcamTools/ToolRulesCheck.py:394
msgid ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."
msgstr ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."

#: flatcamGUI/PreferencesUI.py:5270 flatcamTools/ToolRulesCheck.py:415
#: flatcamTools/ToolRulesCheck.py:1454 flatcamTools/ToolRulesCheck.py:1460
#: flatcamTools/ToolRulesCheck.py:1476 flatcamTools/ToolRulesCheck.py:1483
msgid "Minimum Annular Ring"
msgstr "Minimum Annular Ring"

#: flatcamGUI/PreferencesUI.py:5272 flatcamTools/ToolRulesCheck.py:417
msgid ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."
msgstr ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."

#: flatcamGUI/PreferencesUI.py:5285 flatcamTools/ToolRulesCheck.py:430
msgid "Minimum acceptable ring value."
msgstr "Minimum acceptable ring value."

#: flatcamGUI/PreferencesUI.py:5292 flatcamTools/ToolRulesCheck.py:440
#: flatcamTools/ToolRulesCheck.py:844
msgid "Hole to Hole Clearance"
msgstr "Hole to Hole Clearance"

#: flatcamGUI/PreferencesUI.py:5294 flatcamTools/ToolRulesCheck.py:442
msgid ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."
msgstr ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."

#: flatcamGUI/PreferencesUI.py:5307 flatcamTools/ToolRulesCheck.py:478
msgid "Minimum acceptable drill size."
msgstr "Minimum acceptable drill size."

#: flatcamGUI/PreferencesUI.py:5312 flatcamTools/ToolRulesCheck.py:463
#: flatcamTools/ToolRulesCheck.py:818
msgid "Hole Size"
msgstr "Hole Size"

#: flatcamGUI/PreferencesUI.py:5314 flatcamTools/ToolRulesCheck.py:465
msgid ""
"This checks if the drill holes\n"
"sizes are above the threshold."
msgstr ""
"This checks if the drill holes\n"
"sizes are above the threshold."

#: flatcamGUI/PreferencesUI.py:5339
msgid "Optimal Tool Options"
msgstr "Optimal Tool Options"

#: flatcamGUI/PreferencesUI.py:5345
msgid ""
"A tool to find the minimum distance between\n"
"every two Gerber geometric elements"
msgstr ""
"A tool to find the minimum distance between\n"
"every two Gerber geometric elements"

#: flatcamGUI/PreferencesUI.py:5360 flatcamTools/ToolOptimal.py:78
msgid "Precision"
msgstr "Precision"

#: flatcamGUI/PreferencesUI.py:5362
msgid "Number of decimals for the distances and coordinates in this tool."
msgstr "Number of decimals for the distances and coordinates in this tool."

#: flatcamGUI/PreferencesUI.py:5376
msgid "Excellon File associations"
msgstr "Excellon File associations"

#: flatcamGUI/PreferencesUI.py:5388 flatcamGUI/PreferencesUI.py:5460
#: flatcamGUI/PreferencesUI.py:5529 flatcamGUI/PreferencesUI.py:5598
msgid "Restore"
msgstr "Restore"

#: flatcamGUI/PreferencesUI.py:5389 flatcamGUI/PreferencesUI.py:5461
#: flatcamGUI/PreferencesUI.py:5530
msgid "Restore the extension list to the default state."
msgstr "Restore the extension list to the default state."

#: flatcamGUI/PreferencesUI.py:5390 flatcamGUI/PreferencesUI.py:5462
#: flatcamGUI/PreferencesUI.py:5531 flatcamGUI/PreferencesUI.py:5600
msgid "Delete All"
msgstr "Delete All"

#: flatcamGUI/PreferencesUI.py:5391 flatcamGUI/PreferencesUI.py:5463
#: flatcamGUI/PreferencesUI.py:5532
msgid "Delete all extensions from the list."
msgstr "Delete all extensions from the list."

#: flatcamGUI/PreferencesUI.py:5399 flatcamGUI/PreferencesUI.py:5471
#: flatcamGUI/PreferencesUI.py:5540
msgid "Extensions list"
msgstr "Extensions list"

#: flatcamGUI/PreferencesUI.py:5401 flatcamGUI/PreferencesUI.py:5473
#: flatcamGUI/PreferencesUI.py:5542
msgid ""
"List of file extensions to be\n"
"associated with FlatCAM."
msgstr ""
"List of file extensions to be\n"
"associated with FlatCAM."

#: flatcamGUI/PreferencesUI.py:5421 flatcamGUI/PreferencesUI.py:5493
#: flatcamGUI/PreferencesUI.py:5561 flatcamGUI/PreferencesUI.py:5632
msgid "Extension"
msgstr "Extension"

#: flatcamGUI/PreferencesUI.py:5422 flatcamGUI/PreferencesUI.py:5494
#: flatcamGUI/PreferencesUI.py:5562
msgid "A file extension to be added or deleted to the list."
msgstr "A file extension to be added or deleted to the list."

#: flatcamGUI/PreferencesUI.py:5430 flatcamGUI/PreferencesUI.py:5502
#: flatcamGUI/PreferencesUI.py:5570
msgid "Add Extension"
msgstr "Add Extension"

#: flatcamGUI/PreferencesUI.py:5431 flatcamGUI/PreferencesUI.py:5503
#: flatcamGUI/PreferencesUI.py:5571
msgid "Add a file extension to the list"
msgstr "Add a file extension to the list"

#: flatcamGUI/PreferencesUI.py:5432 flatcamGUI/PreferencesUI.py:5504
#: flatcamGUI/PreferencesUI.py:5572
msgid "Delete Extension"
msgstr "Delete Extension"

#: flatcamGUI/PreferencesUI.py:5433 flatcamGUI/PreferencesUI.py:5505
#: flatcamGUI/PreferencesUI.py:5573
msgid "Delete a file extension from the list"
msgstr "Delete a file extension from the list"

#: flatcamGUI/PreferencesUI.py:5440 flatcamGUI/PreferencesUI.py:5512
#: flatcamGUI/PreferencesUI.py:5580
msgid "Apply Association"
msgstr "Apply Association"

#: flatcamGUI/PreferencesUI.py:5441 flatcamGUI/PreferencesUI.py:5513
#: flatcamGUI/PreferencesUI.py:5581
msgid ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."
msgstr ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."

#: flatcamGUI/PreferencesUI.py:5458
msgid "GCode File associations"
msgstr "GCode File associations"

#: flatcamGUI/PreferencesUI.py:5527
msgid "Gerber File associations"
msgstr "Gerber File associations"

#: flatcamGUI/PreferencesUI.py:5596
msgid "Autocompleter Keywords"
msgstr "Autocompleter Keywords"

#: flatcamGUI/PreferencesUI.py:5599
msgid "Restore the autocompleter keywords list to the default state."
msgstr "Restore the autocompleter keywords list to the default state."

#: flatcamGUI/PreferencesUI.py:5601
msgid "Delete all autocompleter keywords from the list."
msgstr "Delete all autocompleter keywords from the list."

#: flatcamGUI/PreferencesUI.py:5609
msgid "Keywords list"
msgstr "Keywords list"

#: flatcamGUI/PreferencesUI.py:5611
msgid ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."
msgstr ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."

#: flatcamGUI/PreferencesUI.py:5633
msgid "A keyword to be added or deleted to the list."
msgstr "A keyword to be added or deleted to the list."

#: flatcamGUI/PreferencesUI.py:5641
msgid "Add keyword"
msgstr "Add keyword"

#: flatcamGUI/PreferencesUI.py:5642
msgid "Add a keyword to the list"
msgstr "Add a keyword to the list"

#: flatcamGUI/PreferencesUI.py:5643
msgid "Delete keyword"
msgstr "Delete keyword"

#: flatcamGUI/PreferencesUI.py:5644
msgid "Delete a keyword from the list"
msgstr "Delete a keyword from the list"

#: flatcamParsers/ParseExcellon.py:307
msgid "This is GCODE mark"
msgstr "This is GCODE mark"

#: flatcamParsers/ParseExcellon.py:423
msgid ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"
msgstr ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"

#: flatcamParsers/ParseExcellon.py:426
msgid ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."
msgstr ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."

#: flatcamParsers/ParseExcellon.py:881
#, python-brace-format
msgid ""
"{e_code} Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"
msgstr ""
"{e_code} Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"

#: flatcamParsers/ParseExcellon.py:964
msgid ""
"Excellon.create_geometry() -> a drill location was skipped due of not having "
"a tool associated.\n"
"Check the resulting GCode."
msgstr ""
"Excellon.create_geometry() -> a drill location was skipped due of not having "
"a tool associated.\n"
"Check the resulting GCode."

#: flatcamParsers/ParseFont.py:303
msgid "Font not supported, try another one."
msgstr "Font not supported, try another one."

#: flatcamParsers/ParseGerber.py:421
msgid "Gerber processing. Parsing"
msgstr "Gerber processing. Parsing"

#: flatcamParsers/ParseGerber.py:421
msgid "lines"
msgstr "lines"

#: flatcamParsers/ParseGerber.py:950 flatcamParsers/ParseGerber.py:1045
msgid "Coordinates missing, line ignored"
msgstr "Coordinates missing, line ignored"

#: flatcamParsers/ParseGerber.py:952 flatcamParsers/ParseGerber.py:1047
msgid "GERBER file might be CORRUPT. Check the file !!!"
msgstr "GERBER file might be CORRUPT. Check the file !!!"

#: flatcamParsers/ParseGerber.py:1001
msgid ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"
msgstr ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"

#: flatcamParsers/ParseGerber.py:1392
msgid "Gerber processing. Joining polygons"
msgstr "Gerber processing. Joining polygons"

#: flatcamParsers/ParseGerber.py:1409
msgid "Gerber processing. Applying Gerber polarity."
msgstr "Gerber processing. Applying Gerber polarity."

#: flatcamParsers/ParseGerber.py:1451
msgid "Gerber Line"
msgstr "Gerber Line"

#: flatcamParsers/ParseGerber.py:1451
msgid "Gerber Line Content"
msgstr "Gerber Line Content"

#: flatcamParsers/ParseGerber.py:1453
msgid "Gerber Parser ERROR"
msgstr "Gerber Parser ERROR"

#: flatcamParsers/ParseGerber.py:1755
msgid "Gerber Scale done."
msgstr "Gerber Scale done."

#: flatcamParsers/ParseGerber.py:1845
msgid "Gerber Offset done."
msgstr "Gerber Offset done."

#: flatcamParsers/ParseGerber.py:1922
msgid "Gerber Mirror done."
msgstr "Gerber Mirror done."

#: flatcamParsers/ParseGerber.py:1994
msgid "Gerber Skew done."
msgstr "Gerber Skew done."

#: flatcamParsers/ParseGerber.py:2055
msgid "Gerber Rotate done."
msgstr "Gerber Rotate done."

#: flatcamTools/ToolCalculators.py:24
msgid "Calculators"
msgstr "Calculators"

#: flatcamTools/ToolCalculators.py:26
msgid "Units Calculator"
msgstr "Units Calculator"

#: flatcamTools/ToolCalculators.py:70
msgid "Here you enter the value to be converted from INCH to MM"
msgstr "Here you enter the value to be converted from INCH to MM"

#: flatcamTools/ToolCalculators.py:75
msgid "Here you enter the value to be converted from MM to INCH"
msgstr "Here you enter the value to be converted from MM to INCH"

#: flatcamTools/ToolCalculators.py:107
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."

#: flatcamTools/ToolCalculators.py:116
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."

#: flatcamTools/ToolCalculators.py:119
msgid "Tool Diameter"
msgstr "Tool Diameter"

#: flatcamTools/ToolCalculators.py:124
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."

#: flatcamTools/ToolCalculators.py:135 flatcamTools/ToolCalculators.py:221
msgid "Calculate"
msgstr "Calculate"

#: flatcamTools/ToolCalculators.py:138
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "

#: flatcamTools/ToolCalculators.py:195
msgid "Current Value"
msgstr "Current Value"

#: flatcamTools/ToolCalculators.py:200
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."

#: flatcamTools/ToolCalculators.py:204
msgid "Time"
msgstr "Time"

#: flatcamTools/ToolCalculators.py:209
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""
"This is the calculated time required for the procedure.\n"
"In minutes."

#: flatcamTools/ToolCalculators.py:224
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"
msgstr ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"

#: flatcamTools/ToolCalculators.py:271
msgid "Calc. Tool"
msgstr "Calc. Tool"

#: flatcamTools/ToolCutOut.py:36
msgid "Cutout PCB"
msgstr "Cutout PCB"

#: flatcamTools/ToolCutOut.py:74
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolCutOut.py:90
msgid "Object to be cutout.                        "
msgstr "Object to be cutout.                        "

#: flatcamTools/ToolCutOut.py:123
msgid "Margin:"
msgstr "Margin:"

#: flatcamTools/ToolCutOut.py:135
msgid "Gap size:"
msgstr "Gap size:"

#: flatcamTools/ToolCutOut.py:162
msgid "A. Automatic Bridge Gaps"
msgstr "A. Automatic Bridge Gaps"

#: flatcamTools/ToolCutOut.py:164
msgid "This section handle creation of automatic bridge gaps."
msgstr "This section handle creation of automatic bridge gaps."

#: flatcamTools/ToolCutOut.py:175
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: flatcamTools/ToolCutOut.py:199
msgid "FreeForm"
msgstr "FreeForm"

#: flatcamTools/ToolCutOut.py:201
msgid ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: flatcamTools/ToolCutOut.py:210
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: flatcamTools/ToolCutOut.py:219
msgid "Rectangular"
msgstr "Rectangular"

#: flatcamTools/ToolCutOut.py:221
msgid ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: flatcamTools/ToolCutOut.py:230
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: flatcamTools/ToolCutOut.py:238
msgid "B. Manual Bridge Gaps"
msgstr "B. Manual Bridge Gaps"

#: flatcamTools/ToolCutOut.py:240
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "

#: flatcamTools/ToolCutOut.py:256
msgid "Geo Obj"
msgstr "Geo Obj"

#: flatcamTools/ToolCutOut.py:258
msgid "Geometry object used to create the manual cutout."
msgstr "Geometry object used to create the manual cutout."

#: flatcamTools/ToolCutOut.py:269
msgid "Manual Geo"
msgstr "Manual Geo"

#: flatcamTools/ToolCutOut.py:271 flatcamTools/ToolCutOut.py:281
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."

#: flatcamTools/ToolCutOut.py:291
msgid "Manual Add Bridge Gaps"
msgstr "Manual Add Bridge Gaps"

#: flatcamTools/ToolCutOut.py:293
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."

#: flatcamTools/ToolCutOut.py:300
msgid "Generate Gap"
msgstr "Generate Gap"

#: flatcamTools/ToolCutOut.py:302
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."

#: flatcamTools/ToolCutOut.py:401 flatcamTools/ToolCutOut.py:572
#: flatcamTools/ToolNonCopperClear.py:1136
#: flatcamTools/ToolNonCopperClear.py:1177
#: flatcamTools/ToolNonCopperClear.py:1209 flatcamTools/ToolPaint.py:1082
#: flatcamTools/ToolPanelize.py:384 flatcamTools/ToolPanelize.py:399
#: flatcamTools/ToolSub.py:261 flatcamTools/ToolSub.py:276
#: flatcamTools/ToolSub.py:463 flatcamTools/ToolSub.py:478
#: tclCommands/TclCommandCopperClear.py:131
#: tclCommands/TclCommandCopperClear.py:208 tclCommands/TclCommandPaint.py:133
msgid "Could not retrieve object"
msgstr "Could not retrieve object"

#: flatcamTools/ToolCutOut.py:406
msgid ""
"There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"There is no object selected for Cutout.\n"
"Select one and try again."

#: flatcamTools/ToolCutOut.py:412 flatcamTools/ToolCutOut.py:581
#: flatcamTools/ToolCutOut.py:722 flatcamTools/ToolCutOut.py:804
msgid "Tool Diameter is zero value. Change it to a positive real number."
msgstr "Tool Diameter is zero value. Change it to a positive real number."

#: flatcamTools/ToolCutOut.py:426 flatcamTools/ToolCutOut.py:596
msgid "Number of gaps value is missing. Add it and retry."
msgstr "Number of gaps value is missing. Add it and retry."

#: flatcamTools/ToolCutOut.py:431 flatcamTools/ToolCutOut.py:600
msgid ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "
msgstr ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "

#: flatcamTools/ToolCutOut.py:436 flatcamTools/ToolCutOut.py:606
msgid ""
"Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."
msgstr ""
"Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."

#: flatcamTools/ToolCutOut.py:555 flatcamTools/ToolCutOut.py:711
msgid "Any form CutOut operation finished."
msgstr "Any form CutOut operation finished."

#: flatcamTools/ToolCutOut.py:576 flatcamTools/ToolNonCopperClear.py:1140
#: flatcamTools/ToolPaint.py:978 flatcamTools/ToolPanelize.py:389
#: tclCommands/TclCommandBbox.py:66 tclCommands/TclCommandNregions.py:65
msgid "Object not found"
msgstr "Object not found"

#: flatcamTools/ToolCutOut.py:716
msgid ""
"Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""
"Click on the selected geometry object perimeter to create a bridge gap ..."

#: flatcamTools/ToolCutOut.py:733 flatcamTools/ToolCutOut.py:759
msgid "Could not retrieve Geometry object"
msgstr "Could not retrieve Geometry object"

#: flatcamTools/ToolCutOut.py:764
msgid "Geometry object for manual cutout not found"
msgstr "Geometry object for manual cutout not found"

#: flatcamTools/ToolCutOut.py:774
msgid "Added manual Bridge Gap."
msgstr "Added manual Bridge Gap."

#: flatcamTools/ToolCutOut.py:786
msgid "Could not retrieve Gerber object"
msgstr "Could not retrieve Gerber object"

#: flatcamTools/ToolCutOut.py:791
msgid ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."

#: flatcamTools/ToolCutOut.py:797
msgid ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."

#: flatcamTools/ToolCutOut.py:832
msgid "Geometry not supported for cutout"
msgstr "Geometry not supported for cutout"

#: flatcamTools/ToolCutOut.py:884
msgid "Making manual bridge gap..."
msgstr "Making manual bridge gap..."

#: flatcamTools/ToolDblSided.py:25
msgid "2-Sided PCB"
msgstr "2-Sided PCB"

#: flatcamTools/ToolDblSided.py:60 flatcamTools/ToolDblSided.py:84
#: flatcamTools/ToolDblSided.py:108
msgid "Mirror"
msgstr "Mirror"

#: flatcamTools/ToolDblSided.py:62 flatcamTools/ToolDblSided.py:86
#: flatcamTools/ToolDblSided.py:110
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."

#: flatcamTools/ToolDblSided.py:81
msgid "Excellon Object to be mirrored."
msgstr "Excellon Object to be mirrored."

#: flatcamTools/ToolDblSided.py:105
msgid "Geometry Obj to be mirrored."
msgstr "Geometry Obj to be mirrored."

#: flatcamTools/ToolDblSided.py:141
msgid "Axis Ref:"
msgstr "Axis Ref:"

#: flatcamTools/ToolDblSided.py:160
msgid "Point/Box Reference"
msgstr "Point/Box Reference"

#: flatcamTools/ToolDblSided.py:162
msgid ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."
msgstr ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."

#: flatcamTools/ToolDblSided.py:170
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."
msgstr ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."

#: flatcamTools/ToolDblSided.py:190 flatcamTools/ToolNonCopperClear.py:451
#: flatcamTools/ToolPaint.py:338
msgid "Gerber   Reference Box Object"
msgstr "Gerber   Reference Box Object"

#: flatcamTools/ToolDblSided.py:191 flatcamTools/ToolNonCopperClear.py:452
#: flatcamTools/ToolPaint.py:339
msgid "Excellon Reference Box Object"
msgstr "Excellon Reference Box Object"

#: flatcamTools/ToolDblSided.py:192 flatcamTools/ToolNonCopperClear.py:453
#: flatcamTools/ToolPaint.py:340
msgid "Geometry Reference Box Object"
msgstr "Geometry Reference Box Object"

#: flatcamTools/ToolDblSided.py:200
msgid "Alignment Drill Coordinates"
msgstr "Alignment Drill Coordinates"

#: flatcamTools/ToolDblSided.py:202
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."
msgstr ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."

#: flatcamTools/ToolDblSided.py:217
msgid ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."

#: flatcamTools/ToolDblSided.py:236
msgid "Alignment Drill Diameter"
msgstr "Alignment Drill Diameter"

#: flatcamTools/ToolDblSided.py:259
msgid "Create Excellon Object"
msgstr "Create Excellon Object"

#: flatcamTools/ToolDblSided.py:261
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."

#: flatcamTools/ToolDblSided.py:267
msgid "Reset"
msgstr "Reset"

#: flatcamTools/ToolDblSided.py:269
msgid "Resets all the fields."
msgstr "Resets all the fields."

#: flatcamTools/ToolDblSided.py:319
msgid "2-Sided Tool"
msgstr "2-Sided Tool"

#: flatcamTools/ToolDblSided.py:344
msgid ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."
msgstr ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."

#: flatcamTools/ToolDblSided.py:363
msgid "There is no Box reference object loaded. Load one and retry."
msgstr "There is no Box reference object loaded. Load one and retry."

#: flatcamTools/ToolDblSided.py:386
msgid "No value or wrong format in Drill Dia entry. Add it and retry."
msgstr "No value or wrong format in Drill Dia entry. Add it and retry."

#: flatcamTools/ToolDblSided.py:393
msgid "There are no Alignment Drill Coordinates to use. Add them and retry."
msgstr "There are no Alignment Drill Coordinates to use. Add them and retry."

#: flatcamTools/ToolDblSided.py:416
msgid "Excellon object with alignment drills created..."
msgstr "Excellon object with alignment drills created..."

#: flatcamTools/ToolDblSided.py:425 flatcamTools/ToolOptimal.py:310
msgid "There is no Gerber object loaded ..."
msgstr "There is no Gerber object loaded ..."

#: flatcamTools/ToolDblSided.py:429 flatcamTools/ToolDblSided.py:472
#: flatcamTools/ToolDblSided.py:516
msgid "Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr "Only Gerber, Excellon and Geometry objects can be mirrored."

#: flatcamTools/ToolDblSided.py:439
msgid ""
"'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."
msgstr ""
"'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."

#: flatcamTools/ToolDblSided.py:449 flatcamTools/ToolDblSided.py:493
#: flatcamTools/ToolDblSided.py:530
msgid "There is no Box object loaded ..."
msgstr "There is no Box object loaded ..."

#: flatcamTools/ToolDblSided.py:459 flatcamTools/ToolDblSided.py:503
#: flatcamTools/ToolDblSided.py:540
msgid "was mirrored"
msgstr "was mirrored"

#: flatcamTools/ToolDblSided.py:468
msgid "There is no Excellon object loaded ..."
msgstr "There is no Excellon object loaded ..."

#: flatcamTools/ToolDblSided.py:483
msgid ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."
msgstr ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."

#: flatcamTools/ToolDblSided.py:512
msgid "There is no Geometry object loaded ..."
msgstr "There is no Geometry object loaded ..."

#: flatcamTools/ToolDistance.py:48 flatcamTools/ToolDistanceMin.py:49
msgid "Those are the units in which the distance is measured."
msgstr "Those are the units in which the distance is measured."

#: flatcamTools/ToolDistance.py:49 flatcamTools/ToolDistanceMin.py:50
msgid "METRIC (mm)"
msgstr "METRIC (mm)"

#: flatcamTools/ToolDistance.py:49 flatcamTools/ToolDistanceMin.py:50
msgid "INCH (in)"
msgstr "INCH (in)"

#: flatcamTools/ToolDistance.py:52
msgid "Start Coords"
msgstr "Start Coords"

#: flatcamTools/ToolDistance.py:53 flatcamTools/ToolDistance.py:73
msgid "This is measuring Start point coordinates."
msgstr "This is measuring Start point coordinates."

#: flatcamTools/ToolDistance.py:55
msgid "Stop Coords"
msgstr "Stop Coords"

#: flatcamTools/ToolDistance.py:56 flatcamTools/ToolDistance.py:78
msgid "This is the measuring Stop point coordinates."
msgstr "This is the measuring Stop point coordinates."

#: flatcamTools/ToolDistance.py:58 flatcamTools/ToolDistanceMin.py:61
msgid "Dx"
msgstr "Dx"

#: flatcamTools/ToolDistance.py:59 flatcamTools/ToolDistance.py:83
#: flatcamTools/ToolDistanceMin.py:62 flatcamTools/ToolDistanceMin.py:91
msgid "This is the distance measured over the X axis."
msgstr "This is the distance measured over the X axis."

#: flatcamTools/ToolDistance.py:61 flatcamTools/ToolDistanceMin.py:64
msgid "Dy"
msgstr "Dy"

#: flatcamTools/ToolDistance.py:62 flatcamTools/ToolDistance.py:88
#: flatcamTools/ToolDistanceMin.py:65 flatcamTools/ToolDistanceMin.py:96
msgid "This is the distance measured over the Y axis."
msgstr "This is the distance measured over the Y axis."

#: flatcamTools/ToolDistance.py:65 flatcamTools/ToolDistance.py:93
#: flatcamTools/ToolDistanceMin.py:68 flatcamTools/ToolDistanceMin.py:101
msgid "This is orientation angle of the measuring line."
msgstr "This is orientation angle of the measuring line."

#: flatcamTools/ToolDistance.py:67 flatcamTools/ToolDistanceMin.py:70
msgid "DISTANCE"
msgstr "DISTANCE"

#: flatcamTools/ToolDistance.py:68 flatcamTools/ToolDistance.py:98
msgid "This is the point to point Euclidian distance."
msgstr "This is the point to point Euclidian distance."

#: flatcamTools/ToolDistance.py:100 flatcamTools/ToolDistanceMin.py:113
msgid "Measure"
msgstr "Measure"

#: flatcamTools/ToolDistance.py:206
msgid "MEASURING: Click on the Start point ..."
msgstr "MEASURING: Click on the Start point ..."

#: flatcamTools/ToolDistance.py:339
msgid "MEASURING: Click on the Destination point ..."
msgstr "MEASURING: Click on the Destination point ..."

#: flatcamTools/ToolDistance.py:346 flatcamTools/ToolDistanceMin.py:281
#, python-brace-format
msgid "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"
msgstr "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"

#: flatcamTools/ToolDistanceMin.py:31 flatcamTools/ToolDistanceMin.py:152
msgid "Minimum Distance Tool"
msgstr "Minimum Distance Tool"

#: flatcamTools/ToolDistanceMin.py:53
msgid "First object point"
msgstr "First object point"

#: flatcamTools/ToolDistanceMin.py:54 flatcamTools/ToolDistanceMin.py:79
msgid ""
"This is first object point coordinates.\n"
"This is the start point for measuring distance."
msgstr ""
"This is first object point coordinates.\n"
"This is the start point for measuring distance."

#: flatcamTools/ToolDistanceMin.py:57
msgid "Second object point"
msgstr "Second object point"

#: flatcamTools/ToolDistanceMin.py:58 flatcamTools/ToolDistanceMin.py:85
msgid ""
"This is second object point coordinates.\n"
"This is the end point for measuring distance."
msgstr ""
"This is second object point coordinates.\n"
"This is the end point for measuring distance."

#: flatcamTools/ToolDistanceMin.py:71 flatcamTools/ToolDistanceMin.py:106
msgid "This is the point to point Euclidean distance."
msgstr "This is the point to point Euclidean distance."

#: flatcamTools/ToolDistanceMin.py:73
msgid "Half Point"
msgstr "Half Point"

#: flatcamTools/ToolDistanceMin.py:74 flatcamTools/ToolDistanceMin.py:111
msgid "This is the middle point of the point to point Euclidean distance."
msgstr "This is the middle point of the point to point Euclidean distance."

#: flatcamTools/ToolDistanceMin.py:116
msgid "Jump to Half Point"
msgstr "Jump to Half Point"

#: flatcamTools/ToolDistanceMin.py:163
msgid ""
"Select two objects and no more, to measure the distance between them ..."
msgstr ""
"Select two objects and no more, to measure the distance between them ..."

#: flatcamTools/ToolDistanceMin.py:204 flatcamTools/ToolDistanceMin.py:214
#: flatcamTools/ToolDistanceMin.py:223 flatcamTools/ToolDistanceMin.py:244
msgid "Select two objects and no more. Currently the selection has objects: "
msgstr "Select two objects and no more. Currently the selection has objects: "

#: flatcamTools/ToolDistanceMin.py:288
msgid "Objects intersects or touch at"
msgstr "Objects intersects or touch at"

#: flatcamTools/ToolDistanceMin.py:294
msgid "Jumped to the half point between the two selected objects"
msgstr "Jumped to the half point between the two selected objects"

#: flatcamTools/ToolFilm.py:31
msgid "Film PCB"
msgstr "Film PCB"

#: flatcamTools/ToolFilm.py:67 flatcamTools/ToolImage.py:52
#: flatcamTools/ToolPanelize.py:65 flatcamTools/ToolProperties.py:148
msgid "Object Type"
msgstr "Object Type"

#: flatcamTools/ToolFilm.py:69
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."

#: flatcamTools/ToolFilm.py:83
msgid "Film Object"
msgstr "Film Object"

#: flatcamTools/ToolFilm.py:85
msgid "Object for which to create the film."
msgstr "Object for which to create the film."

#: flatcamTools/ToolFilm.py:102
msgid "Box Type:"
msgstr "Box Type:"

#: flatcamTools/ToolFilm.py:104
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."

#: flatcamTools/ToolFilm.py:118 flatcamTools/ToolPanelize.py:135
msgid "Box Object"
msgstr "Box Object"

#: flatcamTools/ToolFilm.py:120
msgid ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."
msgstr ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."

#: flatcamTools/ToolFilm.py:265
msgid "Positive"
msgstr "Positive"

#: flatcamTools/ToolFilm.py:266
msgid "Negative"
msgstr "Negative"

#: flatcamTools/ToolFilm.py:268
msgid "Film Type:"
msgstr "Film Type:"

#: flatcamTools/ToolFilm.py:304
msgid "Punch drill holes"
msgstr "Punch drill holes"

#: flatcamTools/ToolFilm.py:305
msgid ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."
msgstr ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."

#: flatcamTools/ToolFilm.py:323
msgid "Source"
msgstr "Source"

#: flatcamTools/ToolFilm.py:325
msgid ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."
msgstr ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."

#: flatcamTools/ToolFilm.py:330
msgid "Pad center"
msgstr "Pad center"

#: flatcamTools/ToolFilm.py:335
msgid "Excellon Obj"
msgstr "Excellon Obj"

#: flatcamTools/ToolFilm.py:337
msgid ""
"Remove the geometry of Excellon from the Film to create the holes in pads."
msgstr ""
"Remove the geometry of Excellon from the Film to create the holes in pads."

#: flatcamTools/ToolFilm.py:349
msgid "Punch Size"
msgstr "Punch Size"

#: flatcamTools/ToolFilm.py:350
msgid "The value here will control how big is the punch hole in the pads."
msgstr "The value here will control how big is the punch hole in the pads."

#: flatcamTools/ToolFilm.py:366
msgid "Save Film"
msgstr "Save Film"

#: flatcamTools/ToolFilm.py:368
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."
msgstr ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."

#: flatcamTools/ToolFilm.py:480
msgid ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object "
"has pads."
msgstr ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object "
"has pads."

#: flatcamTools/ToolFilm.py:490
msgid "No FlatCAM object selected. Load an object for Film and retry."
msgstr "No FlatCAM object selected. Load an object for Film and retry."

#: flatcamTools/ToolFilm.py:497
msgid "No FlatCAM object selected. Load an object for Box and retry."
msgstr "No FlatCAM object selected. Load an object for Box and retry."

#: flatcamTools/ToolFilm.py:508
msgid "Generating Film ..."
msgstr "Generating Film ..."

#: flatcamTools/ToolFilm.py:546 flatcamTools/ToolFilm.py:550
msgid "Export SVG positive"
msgstr "Export SVG positive"

#: flatcamTools/ToolFilm.py:555
msgid "Export SVG positive cancelled."
msgstr "Export SVG positive cancelled."

#: flatcamTools/ToolFilm.py:577
msgid ""
"No Excellon object selected. Load an object for punching reference and retry."
msgstr ""
"No Excellon object selected. Load an object for punching reference and retry."

#: flatcamTools/ToolFilm.py:601
msgid ""
" Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."
msgstr ""
" Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."

#: flatcamTools/ToolFilm.py:613
msgid ""
"Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."
msgstr ""
"Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."

#: flatcamTools/ToolFilm.py:631
msgid ""
"Could not generate punched hole film because the newly created object "
"geometry is the same as the one in the source object geometry..."
msgstr ""
"Could not generate punched hole film because the newly created object "
"geometry is the same as the one in the source object geometry..."

#: flatcamTools/ToolFilm.py:676 flatcamTools/ToolFilm.py:680
msgid "Export SVG negative"
msgstr "Export SVG negative"

#: flatcamTools/ToolFilm.py:685
msgid "Export SVG negative cancelled."
msgstr "Export SVG negative cancelled."

#: flatcamTools/ToolImage.py:24
msgid "Image as Object"
msgstr "Image as Object"

#: flatcamTools/ToolImage.py:30
msgid "Image to PCB"
msgstr "Image to PCB"

#: flatcamTools/ToolImage.py:54
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."

#: flatcamTools/ToolImage.py:62
msgid "DPI value"
msgstr "DPI value"

#: flatcamTools/ToolImage.py:63
msgid "Specify a DPI value for the image."
msgstr "Specify a DPI value for the image."

#: flatcamTools/ToolImage.py:69
msgid "Level of detail"
msgstr "Level of detail"

#: flatcamTools/ToolImage.py:78
msgid "Image type"
msgstr "Image type"

#: flatcamTools/ToolImage.py:80
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."

#: flatcamTools/ToolImage.py:89 flatcamTools/ToolImage.py:104
#: flatcamTools/ToolImage.py:117 flatcamTools/ToolImage.py:130
msgid "Mask value"
msgstr "Mask value"

#: flatcamTools/ToolImage.py:91
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."

#: flatcamTools/ToolImage.py:106
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:119
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:132
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:140
msgid "Import image"
msgstr "Import image"

#: flatcamTools/ToolImage.py:142
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr "Open a image of raster type and then import it in FlatCAM."

#: flatcamTools/ToolImage.py:176
msgid "Image Tool"
msgstr "Image Tool"

#: flatcamTools/ToolImage.py:206 flatcamTools/ToolImage.py:209
msgid "Import IMAGE"
msgstr "Import IMAGE"

#: flatcamTools/ToolMove.py:101
msgid "MOVE: Click on the Start point ..."
msgstr "MOVE: Click on the Start point ..."

#: flatcamTools/ToolMove.py:112
msgid "MOVE action cancelled. No object(s) to move."
msgstr "MOVE action cancelled. No object(s) to move."

#: flatcamTools/ToolMove.py:139
msgid "MOVE: Click on the Destination point ..."
msgstr "MOVE: Click on the Destination point ..."

#: flatcamTools/ToolMove.py:162
msgid "Moving..."
msgstr "Moving..."

#: flatcamTools/ToolMove.py:165
msgid "No object(s) selected."
msgstr "No object(s) selected."

#: flatcamTools/ToolMove.py:212
msgid "Error when mouse left click."
msgstr "Error when mouse left click."

#: flatcamTools/ToolMove.py:260
msgid "Move action cancelled."
msgstr "Move action cancelled."

#: flatcamTools/ToolNonCopperClear.py:38
msgid "Non-Copper Clearing"
msgstr "Non-Copper Clearing"

#: flatcamTools/ToolNonCopperClear.py:84
msgid ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolNonCopperClear.py:101
msgid "Object to be cleared of excess copper."
msgstr "Object to be cleared of excess copper."

#: flatcamTools/ToolNonCopperClear.py:111
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."

#: flatcamTools/ToolNonCopperClear.py:120
msgid "Operation"
msgstr "Operation"

#: flatcamTools/ToolNonCopperClear.py:126
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: flatcamTools/ToolNonCopperClear.py:134
msgid ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."

#: flatcamTools/ToolNonCopperClear.py:138
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."

#: flatcamTools/ToolNonCopperClear.py:151
msgid ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."
msgstr ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."

#: flatcamTools/ToolNonCopperClear.py:204
msgid "Tool Selection"
msgstr "Tool Selection"

#: flatcamTools/ToolNonCopperClear.py:227
msgid "Diameter for the new tool to add in the Tool Table"
msgstr "Diameter for the new tool to add in the Tool Table"

#: flatcamTools/ToolNonCopperClear.py:272 flatcamTools/ToolPaint.py:202
#: flatcamTools/ToolSolderPaste.py:122
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."

#: flatcamTools/ToolNonCopperClear.py:427 flatcamTools/ToolPaint.py:315
msgid "Area Selection"
msgstr "Area Selection"

#: flatcamTools/ToolNonCopperClear.py:428 flatcamTools/ToolPaint.py:317
msgid "Reference Object"
msgstr "Reference Object"

#: flatcamTools/ToolNonCopperClear.py:430
msgid "Reference:"
msgstr "Reference:"

#: flatcamTools/ToolNonCopperClear.py:445 flatcamTools/ToolPaint.py:332
msgid "Ref. Type"
msgstr "Ref. Type"

#: flatcamTools/ToolNonCopperClear.py:447
msgid ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."

#: flatcamTools/ToolNonCopperClear.py:456 flatcamTools/ToolPaint.py:343
msgid "Ref. Object"
msgstr "Ref. Object"

#: flatcamTools/ToolNonCopperClear.py:458 flatcamTools/ToolPaint.py:345
msgid "The FlatCAM object to be used as non copper clearing reference."
msgstr "The FlatCAM object to be used as non copper clearing reference."

#: flatcamTools/ToolNonCopperClear.py:471
msgid "Generate Geometry"
msgstr "Generate Geometry"

#: flatcamTools/ToolNonCopperClear.py:555 flatcamTools/ToolPaint.py:469
#: flatcamTools/ToolSolderPaste.py:463
msgid "New Tool"
msgstr "New Tool"

#: flatcamTools/ToolNonCopperClear.py:961 flatcamTools/ToolPaint.py:741
#: flatcamTools/ToolSolderPaste.py:794
msgid "Please enter a tool diameter to add, in Float format."
msgstr "Please enter a tool diameter to add, in Float format."

#: flatcamTools/ToolNonCopperClear.py:992 flatcamTools/ToolPaint.py:766
msgid "Adding tool cancelled. Tool already in Tool Table."
msgstr "Adding tool cancelled. Tool already in Tool Table."

#: flatcamTools/ToolNonCopperClear.py:997 flatcamTools/ToolPaint.py:772
msgid "New tool added to Tool Table."
msgstr "New tool added to Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1041 flatcamTools/ToolPaint.py:818
msgid "Tool from Tool Table was edited."
msgstr "Tool from Tool Table was edited."

#: flatcamTools/ToolNonCopperClear.py:1052 flatcamTools/ToolPaint.py:830
#: flatcamTools/ToolSolderPaste.py:885
msgid "Edit cancelled. New diameter value is already in the Tool Table."
msgstr "Edit cancelled. New diameter value is already in the Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1099 flatcamTools/ToolPaint.py:928
msgid "Delete failed. Select a tool to delete."
msgstr "Delete failed. Select a tool to delete."

#: flatcamTools/ToolNonCopperClear.py:1104 flatcamTools/ToolPaint.py:934
msgid "Tool(s) deleted from Tool Table."
msgstr "Tool(s) deleted from Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1122
msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive), "
msgstr "Overlap value must be between 0 (inclusive) and 1 (exclusive), "

#: flatcamTools/ToolNonCopperClear.py:1156
msgid "Wrong Tool Dia value format entered, use a number."
msgstr "Wrong Tool Dia value format entered, use a number."

#: flatcamTools/ToolNonCopperClear.py:1165 flatcamTools/ToolPaint.py:1008
msgid "No selected tools in Tool Table."
msgstr "No selected tools in Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1190
msgid "Click the start point of the area."
msgstr "Click the start point of the area."

#: flatcamTools/ToolNonCopperClear.py:1240 flatcamTools/ToolPaint.py:1118
msgid "Click the end point of the paint area."
msgstr "Click the end point of the paint area."

#: flatcamTools/ToolNonCopperClear.py:1246 flatcamTools/ToolPaint.py:1124
msgid "Zone added. Click to start adding next zone or right click to finish."
msgstr "Zone added. Click to start adding next zone or right click to finish."

#: flatcamTools/ToolNonCopperClear.py:1387
#: flatcamTools/ToolNonCopperClear.py:1389
msgid "Non-Copper clearing ..."
msgstr "Non-Copper clearing ..."

#: flatcamTools/ToolNonCopperClear.py:1399
msgid "NCC Tool started. Reading parameters."
msgstr "NCC Tool started. Reading parameters."

#: flatcamTools/ToolNonCopperClear.py:1462
msgid "NCC Tool. Preparing non-copper polygons."
msgstr "NCC Tool. Preparing non-copper polygons."

#: flatcamTools/ToolNonCopperClear.py:1490 flatcamTools/ToolPaint.py:2518
msgid "No object available."
msgstr "No object available."

#: flatcamTools/ToolNonCopperClear.py:1532
msgid "The reference object type is not supported."
msgstr "The reference object type is not supported."

#: flatcamTools/ToolNonCopperClear.py:1558
msgid ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
msgstr ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."

#: flatcamTools/ToolNonCopperClear.py:1590
msgid "NCC Tool. Calculate 'empty' area."
msgstr "NCC Tool. Calculate 'empty' area."

#: flatcamTools/ToolNonCopperClear.py:1605
#: flatcamTools/ToolNonCopperClear.py:1703
#: flatcamTools/ToolNonCopperClear.py:1715
#: flatcamTools/ToolNonCopperClear.py:1953
#: flatcamTools/ToolNonCopperClear.py:2049
#: flatcamTools/ToolNonCopperClear.py:2061
msgid "Buffering finished"
msgstr "Buffering finished"

#: flatcamTools/ToolNonCopperClear.py:1722
#: flatcamTools/ToolNonCopperClear.py:2067
msgid "The selected object is not suitable for copper clearing."
msgstr "The selected object is not suitable for copper clearing."

#: flatcamTools/ToolNonCopperClear.py:1727
#: flatcamTools/ToolNonCopperClear.py:2072
msgid "Could not get the extent of the area to be non copper cleared."
msgstr "Could not get the extent of the area to be non copper cleared."

#: flatcamTools/ToolNonCopperClear.py:1734
msgid "NCC Tool. Finished calculation of 'empty' area."
msgstr "NCC Tool. Finished calculation of 'empty' area."

#: flatcamTools/ToolNonCopperClear.py:1747
#: flatcamTools/ToolNonCopperClear.py:2097
msgid "NCC Tool clearing with tool diameter = "
msgstr "NCC Tool clearing with tool diameter = "

#: flatcamTools/ToolNonCopperClear.py:1750
#: flatcamTools/ToolNonCopperClear.py:2100
msgid "started."
msgstr "started."

#: flatcamTools/ToolNonCopperClear.py:1892
msgid ""
"There is no NCC Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"There is no NCC Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: flatcamTools/ToolNonCopperClear.py:1902
msgid "NCC Tool clear all done."
msgstr "NCC Tool clear all done."

#: flatcamTools/ToolNonCopperClear.py:1904
msgid "NCC Tool clear all done but the copper features isolation is broken for"
msgstr ""
"NCC Tool clear all done but the copper features isolation is broken for"

#: flatcamTools/ToolNonCopperClear.py:1907
#: flatcamTools/ToolNonCopperClear.py:2273
msgid "tools"
msgstr "tools"

#: flatcamTools/ToolNonCopperClear.py:2269
msgid "NCC Tool Rest Machining clear all done."
msgstr "NCC Tool Rest Machining clear all done."

#: flatcamTools/ToolNonCopperClear.py:2272
msgid ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"
msgstr ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"

#: flatcamTools/ToolNonCopperClear.py:2708
msgid ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."
msgstr ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."

#: flatcamTools/ToolOptimal.py:79
msgid "Number of decimals kept for found distances."
msgstr "Number of decimals kept for found distances."

#: flatcamTools/ToolOptimal.py:87
msgid "Minimum distance"
msgstr "Minimum distance"

#: flatcamTools/ToolOptimal.py:88
msgid "Display minimum distance between copper features."
msgstr "Display minimum distance between copper features."

#: flatcamTools/ToolOptimal.py:92
msgid "Determined"
msgstr "Determined"

#: flatcamTools/ToolOptimal.py:106
msgid "Occurring"
msgstr "Occurring"

#: flatcamTools/ToolOptimal.py:107
msgid "How many times this minimum is found."
msgstr "How many times this minimum is found."

#: flatcamTools/ToolOptimal.py:113
msgid "Minimum points coordinates"
msgstr "Minimum points coordinates"

#: flatcamTools/ToolOptimal.py:114
msgid "Coordinates for points where minimum distance was found."
msgstr "Coordinates for points where minimum distance was found."

#: flatcamTools/ToolOptimal.py:130 flatcamTools/ToolOptimal.py:198
msgid "Jump to selected position"
msgstr "Jump to selected position"

#: flatcamTools/ToolOptimal.py:132 flatcamTools/ToolOptimal.py:200
msgid ""
"Select a position in the Locations text box and then\n"
"click this button."
msgstr ""
"Select a position in the Locations text box and then\n"
"click this button."

#: flatcamTools/ToolOptimal.py:140
msgid "Other distances"
msgstr "Other distances"

#: flatcamTools/ToolOptimal.py:141
msgid ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."
msgstr ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."

#: flatcamTools/ToolOptimal.py:146
msgid "Other distances points coordinates"
msgstr "Other distances points coordinates"

#: flatcamTools/ToolOptimal.py:147 flatcamTools/ToolOptimal.py:161
#: flatcamTools/ToolOptimal.py:181
msgid ""
"Other distances and the coordinates for points\n"
"where the distance was found."
msgstr ""
"Other distances and the coordinates for points\n"
"where the distance was found."

#: flatcamTools/ToolOptimal.py:160
msgid "Gerber distances"
msgstr "Gerber distances"

#: flatcamTools/ToolOptimal.py:180
msgid "Points coordinates"
msgstr "Points coordinates"

#: flatcamTools/ToolOptimal.py:208
msgid "Find Minimum"
msgstr "Find Minimum"

#: flatcamTools/ToolOptimal.py:210
msgid ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."
msgstr ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."

#: flatcamTools/ToolOptimal.py:314
msgid "Only Gerber objects can be evaluated."
msgstr "Only Gerber objects can be evaluated."

#: flatcamTools/ToolOptimal.py:317 flatcamTools/ToolPanelize.py:781
#: flatcamTools/ToolRulesCheck.py:1098
msgid "Working..."
msgstr "Working..."

#: flatcamTools/ToolOptimal.py:320
msgid ""
"Optimal Tool. Started to search for the minimum distance between copper "
"features."
msgstr ""
"Optimal Tool. Started to search for the minimum distance between copper "
"features."

#: flatcamTools/ToolOptimal.py:330
msgid "Optimal Tool. Parsing geometry for aperture"
msgstr "Optimal Tool. Parsing geometry for aperture"

#: flatcamTools/ToolOptimal.py:341
msgid "Optimal Tool. Creating a buffer for the object geometry."
msgstr "Optimal Tool. Creating a buffer for the object geometry."

#: flatcamTools/ToolOptimal.py:351
msgid ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."
msgstr ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."

#: flatcamTools/ToolOptimal.py:356
msgid ""
"Optimal Tool. Finding the distances between each two elements. Iterations"
msgstr ""
"Optimal Tool. Finding the distances between each two elements. Iterations"

#: flatcamTools/ToolOptimal.py:391
msgid "Optimal Tool. Finding the minimum distance."
msgstr "Optimal Tool. Finding the minimum distance."

#: flatcamTools/ToolOptimal.py:407
msgid "Optimal Tool. Finished successfully."
msgstr "Optimal Tool. Finished successfully."

#: flatcamTools/ToolPDF.py:156 flatcamTools/ToolPDF.py:160
msgid "Open PDF"
msgstr "Open PDF"

#: flatcamTools/ToolPDF.py:163
msgid "Open PDF cancelled"
msgstr "Open PDF cancelled"

#: flatcamTools/ToolPDF.py:194
msgid "Parsing PDF file ..."
msgstr "Parsing PDF file ..."

#: flatcamTools/ToolPDF.py:277 flatcamTools/ToolPDF.py:352
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr "Rendering PDF layer #%d ..."

#: flatcamTools/ToolPDF.py:282 flatcamTools/ToolPDF.py:357
msgid "Open PDF file failed."
msgstr "Open PDF file failed."

#: flatcamTools/ToolPDF.py:288 flatcamTools/ToolPDF.py:362
msgid "Rendered"
msgstr "Rendered"

#: flatcamTools/ToolPaint.py:87
msgid ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolPaint.py:104
msgid "Object to be painted."
msgstr "Object to be painted."

#: flatcamTools/ToolPaint.py:114
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."

#: flatcamTools/ToolPaint.py:129
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: flatcamTools/ToolPaint.py:141
msgid ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."

#: flatcamTools/ToolPaint.py:178
msgid "Diameter for the new tool."
msgstr "Diameter for the new tool."

#: flatcamTools/ToolPaint.py:255
msgid ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."

#: flatcamTools/ToolPaint.py:289
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."

#: flatcamTools/ToolPaint.py:314
msgid "Single Polygon"
msgstr "Single Polygon"

#: flatcamTools/ToolPaint.py:316
msgid "All Polygons"
msgstr "All Polygons"

#: flatcamTools/ToolPaint.py:334
msgid ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."

#: flatcamTools/ToolPaint.py:359
msgid "Create Paint Geometry"
msgstr "Create Paint Geometry"

#: flatcamTools/ToolPaint.py:361
msgid ""
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."

#: flatcamTools/ToolPaint.py:948
msgid "Paint Tool. Reading parameters."
msgstr "Paint Tool. Reading parameters."

#: flatcamTools/ToolPaint.py:954
msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive)"
msgstr "Overlap value must be between 0 (inclusive) and 1 (exclusive)"

#: flatcamTools/ToolPaint.py:958 flatcamTools/ToolPaint.py:1021
msgid "Click inside the desired polygon."
msgstr "Click inside the desired polygon."

#: flatcamTools/ToolPaint.py:972
#, python-format
msgid "Could not retrieve object: %s"
msgstr "Could not retrieve object: %s"

#: flatcamTools/ToolPaint.py:986
msgid "Can't do Paint on MultiGeo geometries"
msgstr "Can't do Paint on MultiGeo geometries"

#: flatcamTools/ToolPaint.py:1030 flatcamTools/ToolPaint.py:1303
msgid "Painting polygon..."
msgstr "Painting polygon..."

#: flatcamTools/ToolPaint.py:1061
msgid "Click the start point of the paint area."
msgstr "Click the start point of the paint area."

#: flatcamTools/ToolPaint.py:1259 flatcamTools/ToolPaint.py:1263
#: flatcamTools/ToolPaint.py:1266 flatcamTools/ToolPaint.py:1305
#: flatcamTools/ToolPaint.py:1832 flatcamTools/ToolPaint.py:1836
#: flatcamTools/ToolPaint.py:1839 flatcamTools/ToolPaint.py:2121
#: flatcamTools/ToolPaint.py:2126 flatcamTools/ToolPaint.py:2129
#: flatcamTools/ToolPaint.py:2303 flatcamTools/ToolPaint.py:2310
msgid "Paint Tool."
msgstr "Paint Tool."

#: flatcamTools/ToolPaint.py:1259 flatcamTools/ToolPaint.py:1263
#: flatcamTools/ToolPaint.py:1266
msgid "Normal painting polygon task started."
msgstr "Normal painting polygon task started."

#: flatcamTools/ToolPaint.py:1260 flatcamTools/ToolPaint.py:1658
#: flatcamTools/ToolPaint.py:1833 flatcamTools/ToolPaint.py:2123
#: flatcamTools/ToolPaint.py:2305
msgid "Buffering geometry..."
msgstr "Buffering geometry..."

#: flatcamTools/ToolPaint.py:1300
msgid "No polygon found."
msgstr "No polygon found."

#: flatcamTools/ToolPaint.py:1305
msgid "Painting polygon at location"
msgstr "Painting polygon at location"

#: flatcamTools/ToolPaint.py:1388
msgid "Geometry could not be painted completely"
msgstr "Geometry could not be painted completely"

#: flatcamTools/ToolPaint.py:1433
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"
msgstr ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"

#: flatcamTools/ToolPaint.py:1477 flatcamTools/ToolPaint.py:1812
#: flatcamTools/ToolPaint.py:1962 flatcamTools/ToolPaint.py:2283
#: flatcamTools/ToolPaint.py:2437
msgid ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: flatcamTools/ToolPaint.py:1482
msgid "Paint Single Done."
msgstr "Paint Single Done."

#: flatcamTools/ToolPaint.py:1514 flatcamTools/ToolPaint.py:1990
#: flatcamTools/ToolPaint.py:2465
msgid "Polygon Paint started ..."
msgstr "Polygon Paint started ..."

#: flatcamTools/ToolPaint.py:1575 flatcamTools/ToolPaint.py:2052
msgid "Painting polygons..."
msgstr "Painting polygons..."

#: flatcamTools/ToolPaint.py:1657 flatcamTools/ToolPaint.py:1660
#: flatcamTools/ToolPaint.py:1662
msgid "Paint Tool. Normal painting all task started."
msgstr "Paint Tool. Normal painting all task started."

#: flatcamTools/ToolPaint.py:1696 flatcamTools/ToolPaint.py:1868
#: flatcamTools/ToolPaint.py:2170 flatcamTools/ToolPaint.py:2346
msgid "Painting with tool diameter = "
msgstr "Painting with tool diameter = "

#: flatcamTools/ToolPaint.py:1699 flatcamTools/ToolPaint.py:1871
#: flatcamTools/ToolPaint.py:2173 flatcamTools/ToolPaint.py:2349
msgid "started"
msgstr "started"

#: flatcamTools/ToolPaint.py:1761 flatcamTools/ToolPaint.py:1917
#: flatcamTools/ToolPaint.py:2233 flatcamTools/ToolPaint.py:2393
msgid ""
"Could not do Paint All. Try a different combination of parameters. Or a "
"different Method of paint"
msgstr ""
"Could not do Paint All. Try a different combination of parameters. Or a "
"different Method of paint"

#: flatcamTools/ToolPaint.py:1821
msgid "Paint All Done."
msgstr "Paint All Done."

#: flatcamTools/ToolPaint.py:1832 flatcamTools/ToolPaint.py:1836
#: flatcamTools/ToolPaint.py:1839
msgid "Rest machining painting all task started."
msgstr "Rest machining painting all task started."

#: flatcamTools/ToolPaint.py:1971 flatcamTools/ToolPaint.py:2446
msgid "Paint All with Rest-Machining done."
msgstr "Paint All with Rest-Machining done."

#: flatcamTools/ToolPaint.py:2122 flatcamTools/ToolPaint.py:2126
#: flatcamTools/ToolPaint.py:2129
msgid "Normal painting area task started."
msgstr "Normal painting area task started."

#: flatcamTools/ToolPaint.py:2292
msgid "Paint Area Done."
msgstr "Paint Area Done."

#: flatcamTools/ToolPaint.py:2304 flatcamTools/ToolPaint.py:2310
msgid "Rest machining painting area task started."
msgstr "Rest machining painting area task started."

#: flatcamTools/ToolPaint.py:2307
msgid "Paint Tool. Rest machining painting area task started."
msgstr "Paint Tool. Rest machining painting area task started."

#: flatcamTools/ToolPanelize.py:34
msgid "Panelize PCB"
msgstr "Panelize PCB"

#: flatcamTools/ToolPanelize.py:67
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: flatcamTools/ToolPanelize.py:82
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."

#: flatcamTools/ToolPanelize.py:95
msgid "Penelization Reference"
msgstr "Penelization Reference"

#: flatcamTools/ToolPanelize.py:97
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."

#: flatcamTools/ToolPanelize.py:120
msgid "Box Type"
msgstr "Box Type"

#: flatcamTools/ToolPanelize.py:122
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."

#: flatcamTools/ToolPanelize.py:137
msgid ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."
msgstr ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."

#: flatcamTools/ToolPanelize.py:143
msgid "Panel Data"
msgstr "Panel Data"

#: flatcamTools/ToolPanelize.py:145
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."

#: flatcamTools/ToolPanelize.py:204
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"

#: flatcamTools/ToolPanelize.py:212
msgid "Constrain panel within"
msgstr "Constrain panel within"

#: flatcamTools/ToolPanelize.py:252
msgid "Panelize Object"
msgstr "Panelize Object"

#: flatcamTools/ToolPanelize.py:254 flatcamTools/ToolRulesCheck.py:492
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."

#: flatcamTools/ToolPanelize.py:302
msgid "Panel. Tool"
msgstr "Panel. Tool"

#: flatcamTools/ToolPanelize.py:431
msgid "Columns or Rows are zero value. Change them to a positive integer."
msgstr "Columns or Rows are zero value. Change them to a positive integer."

#: flatcamTools/ToolPanelize.py:468
msgid "Generating panel ... "
msgstr "Generating panel ... "

#: flatcamTools/ToolPanelize.py:752
msgid "Generating panel ... Adding the Gerber code."
msgstr "Generating panel ... Adding the Gerber code."

#: flatcamTools/ToolPanelize.py:764
msgid "Generating panel... Spawning copies"
msgstr "Generating panel... Spawning copies"

#: flatcamTools/ToolPanelize.py:774
msgid "Panel done..."
msgstr "Panel done..."

#: flatcamTools/ToolPanelize.py:777
#, python-brace-format
msgid ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"
msgstr ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"

#: flatcamTools/ToolPanelize.py:786
msgid "Panel created successfully."
msgstr "Panel created successfully."

#: flatcamTools/ToolPcbWizard.py:31
msgid "PcbWizard Import Tool"
msgstr "PcbWizard Import Tool"

#: flatcamTools/ToolPcbWizard.py:39
msgid "Import 2-file Excellon"
msgstr "Import 2-file Excellon"

#: flatcamTools/ToolPcbWizard.py:50
msgid "Load files"
msgstr "Load files"

#: flatcamTools/ToolPcbWizard.py:56
msgid "Excellon file"
msgstr "Excellon file"

#: flatcamTools/ToolPcbWizard.py:58
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"

#: flatcamTools/ToolPcbWizard.py:64
msgid "INF file"
msgstr "INF file"

#: flatcamTools/ToolPcbWizard.py:66
msgid "Load the INF file."
msgstr "Load the INF file."

#: flatcamTools/ToolPcbWizard.py:78
msgid "Tool Number"
msgstr "Tool Number"

#: flatcamTools/ToolPcbWizard.py:80
msgid "Tool diameter in file units."
msgstr "Tool diameter in file units."

#: flatcamTools/ToolPcbWizard.py:86
msgid "Excellon format"
msgstr "Excellon format"

#: flatcamTools/ToolPcbWizard.py:94
msgid "Int. digits"
msgstr "Int. digits"

#: flatcamTools/ToolPcbWizard.py:96
msgid "The number of digits for the integral part of the coordinates."
msgstr "The number of digits for the integral part of the coordinates."

#: flatcamTools/ToolPcbWizard.py:103
msgid "Frac. digits"
msgstr "Frac. digits"

#: flatcamTools/ToolPcbWizard.py:105
msgid "The number of digits for the fractional part of the coordinates."
msgstr "The number of digits for the fractional part of the coordinates."

#: flatcamTools/ToolPcbWizard.py:112
msgid "No Suppression"
msgstr "No Suppression"

#: flatcamTools/ToolPcbWizard.py:113
msgid "Zeros supp."
msgstr "Zeros supp."

#: flatcamTools/ToolPcbWizard.py:115
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"

#: flatcamTools/ToolPcbWizard.py:128
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."

#: flatcamTools/ToolPcbWizard.py:135
msgid "Import Excellon"
msgstr "Import Excellon"

#: flatcamTools/ToolPcbWizard.py:137
msgid ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."

#: flatcamTools/ToolPcbWizard.py:196
msgid "PCBWizard Tool"
msgstr "PCBWizard Tool"

#: flatcamTools/ToolPcbWizard.py:290 flatcamTools/ToolPcbWizard.py:294
msgid "Load PcbWizard Excellon file"
msgstr "Load PcbWizard Excellon file"

#: flatcamTools/ToolPcbWizard.py:313 flatcamTools/ToolPcbWizard.py:317
msgid "Load PcbWizard INF file"
msgstr "Load PcbWizard INF file"

#: flatcamTools/ToolPcbWizard.py:365
msgid ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."

#: flatcamTools/ToolPcbWizard.py:386
msgid "PcbWizard .INF file loaded."
msgstr "PcbWizard .INF file loaded."

#: flatcamTools/ToolPcbWizard.py:391
msgid "Main PcbWizard Excellon file loaded."
msgstr "Main PcbWizard Excellon file loaded."

#: flatcamTools/ToolPcbWizard.py:430
msgid "Cannot parse file"
msgstr "Cannot parse file"

#: flatcamTools/ToolPcbWizard.py:455
msgid "Importing Excellon."
msgstr "Importing Excellon."

#: flatcamTools/ToolPcbWizard.py:462
msgid "Import Excellon file failed."
msgstr "Import Excellon file failed."

#: flatcamTools/ToolPcbWizard.py:470
msgid "Imported"
msgstr "Imported"

#: flatcamTools/ToolPcbWizard.py:474
msgid "Excellon merging is in progress. Please wait..."
msgstr "Excellon merging is in progress. Please wait..."

#: flatcamTools/ToolPcbWizard.py:477
msgid "The imported Excellon file is None."
msgstr "The imported Excellon file is None."

#: flatcamTools/ToolProperties.py:117
msgid "Properties Tool was not displayed. No object selected."
msgstr "Properties Tool was not displayed. No object selected."

#: flatcamTools/ToolProperties.py:125
msgid "Object Properties are displayed."
msgstr "Object Properties are displayed."

#: flatcamTools/ToolProperties.py:126
msgid "Properties Tool"
msgstr "Properties Tool"

#: flatcamTools/ToolProperties.py:135
msgid "TYPE"
msgstr "TYPE"

#: flatcamTools/ToolProperties.py:136
msgid "NAME"
msgstr "NAME"

#: flatcamTools/ToolProperties.py:137
msgid "Dimensions"
msgstr "Dimensions"

#: flatcamTools/ToolProperties.py:151
msgid "Geo Type"
msgstr "Geo Type"

#: flatcamTools/ToolProperties.py:152
msgid "Single-Geo"
msgstr "Single-Geo"

#: flatcamTools/ToolProperties.py:152
msgid "Multi-Geo"
msgstr "Multi-Geo"

#: flatcamTools/ToolProperties.py:160
msgid "Calculating dimensions ... Please wait."
msgstr "Calculating dimensions ... Please wait."

#: flatcamTools/ToolProperties.py:251
msgid "Inch"
msgstr "Inch"

#: flatcamTools/ToolProperties.py:252
msgid "Metric"
msgstr "Metric"

#: flatcamTools/ToolProperties.py:303 flatcamTools/ToolProperties.py:317
#: flatcamTools/ToolProperties.py:320 flatcamTools/ToolProperties.py:323
msgid "Present"
msgstr "Present"

#: flatcamTools/ToolProperties.py:357
msgid "Width"
msgstr "Width"

#: flatcamTools/ToolProperties.py:362 flatcamTools/ToolProperties.py:366
msgid "Box Area"
msgstr "Box Area"

#: flatcamTools/ToolProperties.py:363 flatcamTools/ToolProperties.py:367
msgid "Convex_Hull Area"
msgstr "Convex_Hull Area"

#: flatcamTools/ToolRulesCheck.py:33
msgid "Check Rules"
msgstr "Check Rules"

#: flatcamTools/ToolRulesCheck.py:61
msgid "Gerber Files"
msgstr "Gerber Files"

#: flatcamTools/ToolRulesCheck.py:63
msgid "Gerber objects for which to check rules."
msgstr "Gerber objects for which to check rules."

#: flatcamTools/ToolRulesCheck.py:77
msgid "Top"
msgstr "Top"

#: flatcamTools/ToolRulesCheck.py:79
msgid "The Top Gerber Copper object for which rules are checked."
msgstr "The Top Gerber Copper object for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:94
msgid "Bottom"
msgstr "Bottom"

#: flatcamTools/ToolRulesCheck.py:96
msgid "The Bottom Gerber Copper object for which rules are checked."
msgstr "The Bottom Gerber Copper object for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:111
msgid "SM Top"
msgstr "SM Top"

#: flatcamTools/ToolRulesCheck.py:113
msgid "The Top Gerber Solder Mask object for which rules are checked."
msgstr "The Top Gerber Solder Mask object for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:128
msgid "SM Bottom"
msgstr "SM Bottom"

#: flatcamTools/ToolRulesCheck.py:130
msgid "The Bottom Gerber Solder Mask object for which rules are checked."
msgstr "The Bottom Gerber Solder Mask object for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:145
msgid "Silk Top"
msgstr "Silk Top"

#: flatcamTools/ToolRulesCheck.py:147
msgid "The Top Gerber Silkscreen object for which rules are checked."
msgstr "The Top Gerber Silkscreen object for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:162
msgid "Silk Bottom"
msgstr "Silk Bottom"

#: flatcamTools/ToolRulesCheck.py:164
msgid "The Bottom Gerber Silkscreen object for which rules are checked."
msgstr "The Bottom Gerber Silkscreen object for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:179
msgid "Outline"
msgstr "Outline"

#: flatcamTools/ToolRulesCheck.py:181
msgid "The Gerber Outline (Cutout) object for which rules are checked."
msgstr "The Gerber Outline (Cutout) object for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:192
msgid "Excellon Objects"
msgstr "Excellon Objects"

#: flatcamTools/ToolRulesCheck.py:194
msgid "Excellon objects for which to check rules."
msgstr "Excellon objects for which to check rules."

#: flatcamTools/ToolRulesCheck.py:205
msgid "Excellon 1"
msgstr "Excellon 1"

#: flatcamTools/ToolRulesCheck.py:207
msgid ""
"Excellon object for which to check rules.\n"
"Holds the plated holes or a general Excellon file content."
msgstr ""
"Excellon object for which to check rules.\n"
"Holds the plated holes or a general Excellon file content."

#: flatcamTools/ToolRulesCheck.py:223
msgid "Excellon 2"
msgstr "Excellon 2"

#: flatcamTools/ToolRulesCheck.py:225
msgid ""
"Excellon object for which to check rules.\n"
"Holds the non-plated holes."
msgstr ""
"Excellon object for which to check rules.\n"
"Holds the non-plated holes."

#: flatcamTools/ToolRulesCheck.py:238
msgid "All Rules"
msgstr "All Rules"

#: flatcamTools/ToolRulesCheck.py:240
msgid "This check/uncheck all the rules below."
msgstr "This check/uncheck all the rules below."

#: flatcamTools/ToolRulesCheck.py:490
msgid "Run Rules Check"
msgstr "Run Rules Check"

#: flatcamTools/ToolRulesCheck.py:1129 flatcamTools/ToolRulesCheck.py:1189
#: flatcamTools/ToolRulesCheck.py:1226 flatcamTools/ToolRulesCheck.py:1298
#: flatcamTools/ToolRulesCheck.py:1352 flatcamTools/ToolRulesCheck.py:1390
#: flatcamTools/ToolRulesCheck.py:1455
msgid "Value is not valid."
msgstr "Value is not valid."

#: flatcamTools/ToolRulesCheck.py:1143
msgid "TOP -> Copper to Copper clearance"
msgstr "TOP -> Copper to Copper clearance"

#: flatcamTools/ToolRulesCheck.py:1154
msgid "BOTTOM -> Copper to Copper clearance"
msgstr "BOTTOM -> Copper to Copper clearance"

#: flatcamTools/ToolRulesCheck.py:1159 flatcamTools/ToolRulesCheck.py:1253
#: flatcamTools/ToolRulesCheck.py:1417
msgid ""
"At least one Gerber object has to be selected for this rule but none is "
"selected."
msgstr ""
"At least one Gerber object has to be selected for this rule but none is "
"selected."

#: flatcamTools/ToolRulesCheck.py:1195
msgid ""
"One of the copper Gerber objects or the Outline Gerber object is not valid."
msgstr ""
"One of the copper Gerber objects or the Outline Gerber object is not valid."

#: flatcamTools/ToolRulesCheck.py:1208 flatcamTools/ToolRulesCheck.py:1372
msgid ""
"Outline Gerber object presence is mandatory for this rule but it is not "
"selected."
msgstr ""
"Outline Gerber object presence is mandatory for this rule but it is not "
"selected."

#: flatcamTools/ToolRulesCheck.py:1225 flatcamTools/ToolRulesCheck.py:1252
msgid "Silk to Silk clearance"
msgstr "Silk to Silk clearance"

#: flatcamTools/ToolRulesCheck.py:1238
msgid "TOP -> Silk to Silk clearance"
msgstr "TOP -> Silk to Silk clearance"

#: flatcamTools/ToolRulesCheck.py:1248
msgid "BOTTOM -> Silk to Silk clearance"
msgstr "BOTTOM -> Silk to Silk clearance"

#: flatcamTools/ToolRulesCheck.py:1304
msgid "One or more of the Gerber objects is not valid."
msgstr "One or more of the Gerber objects is not valid."

#: flatcamTools/ToolRulesCheck.py:1312
msgid "TOP -> Silk to Solder Mask Clearance"
msgstr "TOP -> Silk to Solder Mask Clearance"

#: flatcamTools/ToolRulesCheck.py:1318
msgid "BOTTOM -> Silk to Solder Mask Clearance"
msgstr "BOTTOM -> Silk to Solder Mask Clearance"

#: flatcamTools/ToolRulesCheck.py:1322
msgid ""
"Both Silk and Solder Mask Gerber objects has to be either both Top or both "
"Bottom."
msgstr ""
"Both Silk and Solder Mask Gerber objects has to be either both Top or both "
"Bottom."

#: flatcamTools/ToolRulesCheck.py:1358
msgid ""
"One of the Silk Gerber objects or the Outline Gerber object is not valid."
msgstr ""
"One of the Silk Gerber objects or the Outline Gerber object is not valid."

#: flatcamTools/ToolRulesCheck.py:1402
msgid "TOP -> Minimum Solder Mask Sliver"
msgstr "TOP -> Minimum Solder Mask Sliver"

#: flatcamTools/ToolRulesCheck.py:1412
msgid "BOTTOM -> Minimum Solder Mask Sliver"
msgstr "BOTTOM -> Minimum Solder Mask Sliver"

#: flatcamTools/ToolRulesCheck.py:1461
msgid "One of the Copper Gerber objects or the Excellon objects is not valid."
msgstr "One of the Copper Gerber objects or the Excellon objects is not valid."

#: flatcamTools/ToolRulesCheck.py:1477
msgid ""
"Excellon object presence is mandatory for this rule but none is selected."
msgstr ""
"Excellon object presence is mandatory for this rule but none is selected."

#: flatcamTools/ToolRulesCheck.py:1550 flatcamTools/ToolRulesCheck.py:1563
#: flatcamTools/ToolRulesCheck.py:1574 flatcamTools/ToolRulesCheck.py:1587
msgid "STATUS"
msgstr "STATUS"

#: flatcamTools/ToolRulesCheck.py:1553 flatcamTools/ToolRulesCheck.py:1577
msgid "FAILED"
msgstr "FAILED"

#: flatcamTools/ToolRulesCheck.py:1566 flatcamTools/ToolRulesCheck.py:1590
msgid "PASSED"
msgstr "PASSED"

#: flatcamTools/ToolRulesCheck.py:1567 flatcamTools/ToolRulesCheck.py:1591
msgid "Violations: There are no violations for the current rule."
msgstr "Violations: There are no violations for the current rule."

#: flatcamTools/ToolShell.py:70 flatcamTools/ToolShell.py:72
msgid "...proccessing..."
msgstr "...proccessing..."

#: flatcamTools/ToolSolderPaste.py:36
msgid "Solder Paste Tool"
msgstr "Solder Paste Tool"

#: flatcamTools/ToolSolderPaste.py:64
msgid "Gerber Solder paste object.                        "
msgstr "Gerber Solder paste object.                        "

#: flatcamTools/ToolSolderPaste.py:71
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."

#: flatcamTools/ToolSolderPaste.py:86
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."

#: flatcamTools/ToolSolderPaste.py:93
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."

#: flatcamTools/ToolSolderPaste.py:100
msgid "New Nozzle Tool"
msgstr "New Nozzle Tool"

#: flatcamTools/ToolSolderPaste.py:116
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."

#: flatcamTools/ToolSolderPaste.py:128
msgid "Generate solder paste dispensing geometry."
msgstr "Generate solder paste dispensing geometry."

#: flatcamTools/ToolSolderPaste.py:141
msgid "STEP 1"
msgstr "STEP 1"

#: flatcamTools/ToolSolderPaste.py:143
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."
msgstr ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."

#: flatcamTools/ToolSolderPaste.py:146
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""
"Select tools.\n"
"Modify parameters."

#: flatcamTools/ToolSolderPaste.py:234
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."

#: flatcamTools/ToolSolderPaste.py:288
msgid "Generate GCode"
msgstr "Generate GCode"

#: flatcamTools/ToolSolderPaste.py:290
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."

#: flatcamTools/ToolSolderPaste.py:305
msgid "STEP 2"
msgstr "STEP 2"

#: flatcamTools/ToolSolderPaste.py:307
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."

#: flatcamTools/ToolSolderPaste.py:323
msgid "Geo Result"
msgstr "Geo Result"

#: flatcamTools/ToolSolderPaste.py:325
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: flatcamTools/ToolSolderPaste.py:334
msgid "STEP 3"
msgstr "STEP 3"

#: flatcamTools/ToolSolderPaste.py:336
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."

#: flatcamTools/ToolSolderPaste.py:356
msgid "CNC Result"
msgstr "CNC Result"

#: flatcamTools/ToolSolderPaste.py:358
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: flatcamTools/ToolSolderPaste.py:368
msgid "View GCode"
msgstr "View GCode"

#: flatcamTools/ToolSolderPaste.py:370
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."

#: flatcamTools/ToolSolderPaste.py:374
msgid "Save GCode"
msgstr "Save GCode"

#: flatcamTools/ToolSolderPaste.py:376
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."

#: flatcamTools/ToolSolderPaste.py:380
msgid "STEP 4"
msgstr "STEP 4"

#: flatcamTools/ToolSolderPaste.py:382
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."

#: flatcamTools/ToolSolderPaste.py:824
msgid "Adding Nozzle tool cancelled. Tool already in Tool Table."
msgstr "Adding Nozzle tool cancelled. Tool already in Tool Table."

#: flatcamTools/ToolSolderPaste.py:830
msgid "New Nozzle tool added to Tool Table."
msgstr "New Nozzle tool added to Tool Table."

#: flatcamTools/ToolSolderPaste.py:873
msgid "Nozzle tool from Tool Table was edited."
msgstr "Nozzle tool from Tool Table was edited."

#: flatcamTools/ToolSolderPaste.py:931
msgid "Delete failed. Select a Nozzle tool to delete."
msgstr "Delete failed. Select a Nozzle tool to delete."

#: flatcamTools/ToolSolderPaste.py:937
msgid "Nozzle tool(s) deleted from Tool Table."
msgstr "Nozzle tool(s) deleted from Tool Table."

#: flatcamTools/ToolSolderPaste.py:993
msgid "No SolderPaste mask Gerber object loaded."
msgstr "No SolderPaste mask Gerber object loaded."

#: flatcamTools/ToolSolderPaste.py:1011
msgid "Creating Solder Paste dispensing geometry."
msgstr "Creating Solder Paste dispensing geometry."

#: flatcamTools/ToolSolderPaste.py:1024
msgid "No Nozzle tools in the tool table."
msgstr "No Nozzle tools in the tool table."

#: flatcamTools/ToolSolderPaste.py:1151
msgid "Cancelled. Empty file, it has no geometry..."
msgstr "Cancelled. Empty file, it has no geometry..."

#: flatcamTools/ToolSolderPaste.py:1155
msgid "Solder Paste geometry generated successfully"
msgstr "Solder Paste geometry generated successfully"

#: flatcamTools/ToolSolderPaste.py:1162
msgid "Some or all pads have no solder due of inadequate nozzle diameters..."
msgstr "Some or all pads have no solder due of inadequate nozzle diameters..."

#: flatcamTools/ToolSolderPaste.py:1176
msgid "Generating Solder Paste dispensing geometry..."
msgstr "Generating Solder Paste dispensing geometry..."

#: flatcamTools/ToolSolderPaste.py:1197
msgid "There is no Geometry object available."
msgstr "There is no Geometry object available."

#: flatcamTools/ToolSolderPaste.py:1202
msgid "This Geometry can't be processed. NOT a solder_paste_tool geometry."
msgstr "This Geometry can't be processed. NOT a solder_paste_tool geometry."

#: flatcamTools/ToolSolderPaste.py:1310
msgid "ToolSolderPaste CNCjob created"
msgstr "ToolSolderPaste CNCjob created"

#: flatcamTools/ToolSolderPaste.py:1343 flatcamTools/ToolSolderPaste.py:1348
#: flatcamTools/ToolSolderPaste.py:1403
msgid ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."
msgstr ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."

#: flatcamTools/ToolSolderPaste.py:1373
msgid "No Gcode in the object"
msgstr "No Gcode in the object"

#: flatcamTools/ToolSolderPaste.py:1413
msgid "Export GCode ..."
msgstr "Export GCode ..."

#: flatcamTools/ToolSolderPaste.py:1461
msgid "Solder paste dispenser GCode file saved to"
msgstr "Solder paste dispenser GCode file saved to"

#: flatcamTools/ToolSub.py:64
msgid "Gerber Objects"
msgstr "Gerber Objects"

#: flatcamTools/ToolSub.py:73 flatcamTools/ToolSub.py:119
msgid "Target"
msgstr "Target"

#: flatcamTools/ToolSub.py:75
msgid ""
"Gerber object from which to subtract\n"
"the subtractor Gerber object."
msgstr ""
"Gerber object from which to subtract\n"
"the subtractor Gerber object."

#: flatcamTools/ToolSub.py:87 flatcamTools/ToolSub.py:133
msgid "Subtractor"
msgstr "Subtractor"

#: flatcamTools/ToolSub.py:89
msgid ""
"Gerber object that will be subtracted\n"
"from the target Gerber object."
msgstr ""
"Gerber object that will be subtracted\n"
"from the target Gerber object."

#: flatcamTools/ToolSub.py:96
msgid "Substract Gerber"
msgstr "Substract Gerber"

#: flatcamTools/ToolSub.py:98
msgid ""
"Will remove the area occupied by the subtractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""
"Will remove the area occupied by the subtractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."

#: flatcamTools/ToolSub.py:110
msgid "Geometry Objects"
msgstr "Geometry Objects"

#: flatcamTools/ToolSub.py:121
msgid ""
"Geometry object from which to subtract\n"
"the subtractor Geometry object."
msgstr ""
"Geometry object from which to subtract\n"
"the subtractor Geometry object."

#: flatcamTools/ToolSub.py:135
msgid ""
"Geometry object that will be subtracted\n"
"from the target Geometry object."
msgstr ""
"Geometry object that will be subtracted\n"
"from the target Geometry object."

#: flatcamTools/ToolSub.py:143
msgid ""
"Checking this will close the paths cut by the Geometry subtractor object."
msgstr ""
"Checking this will close the paths cut by the Geometry subtractor object."

#: flatcamTools/ToolSub.py:146
msgid "Subtract Geometry"
msgstr "Subtract Geometry"

#: flatcamTools/ToolSub.py:148
msgid ""
"Will remove the area occupied by the subtractor\n"
"Geometry from the Target Geometry."
msgstr ""
"Will remove the area occupied by the subtractor\n"
"Geometry from the Target Geometry."

#: flatcamTools/ToolSub.py:235
msgid "Sub Tool"
msgstr "Sub Tool"

#: flatcamTools/ToolSub.py:252 flatcamTools/ToolSub.py:454
msgid "No Target object loaded."
msgstr "No Target object loaded."

#: flatcamTools/ToolSub.py:267 flatcamTools/ToolSub.py:469
msgid "No Subtractor object loaded."
msgstr "No Subtractor object loaded."

#: flatcamTools/ToolSub.py:321
msgid "Parsing geometry for aperture"
msgstr "Parsing geometry for aperture"

#: flatcamTools/ToolSub.py:423 flatcamTools/ToolSub.py:626
msgid "Generating new object ..."
msgstr "Generating new object ..."

#: flatcamTools/ToolSub.py:427 flatcamTools/ToolSub.py:630
#: flatcamTools/ToolSub.py:711
msgid "Generating new object failed."
msgstr "Generating new object failed."

#: flatcamTools/ToolSub.py:432 flatcamTools/ToolSub.py:636
msgid "Created"
msgstr "Created"

#: flatcamTools/ToolSub.py:483
msgid "Currently, the Subtractor geometry cannot be of type Multigeo."
msgstr "Currently, the Subtractor geometry cannot be of type Multigeo."

#: flatcamTools/ToolSub.py:528
msgid "Parsing solid_geometry ..."
msgstr "Parsing solid_geometry ..."

#: flatcamTools/ToolSub.py:530
msgid "Parsing solid_geometry for tool"
msgstr "Parsing solid_geometry for tool"

#: flatcamTools/ToolTransform.py:24
msgid "Object Transform"
msgstr "Object Transform"

#: flatcamTools/ToolTransform.py:81
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: flatcamTools/ToolTransform.py:99 flatcamTools/ToolTransform.py:121
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."

#: flatcamTools/ToolTransform.py:110 flatcamTools/ToolTransform.py:132
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: flatcamTools/ToolTransform.py:159 flatcamTools/ToolTransform.py:180
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: flatcamTools/ToolTransform.py:228 flatcamTools/ToolTransform.py:249
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"

#: flatcamTools/ToolTransform.py:267 flatcamTools/ToolTransform.py:273
msgid "Flip the selected object(s) over the X axis."
msgstr "Flip the selected object(s) over the X axis."

#: flatcamTools/ToolTransform.py:298
msgid "Ref. Point"
msgstr "Ref. Point"

#: flatcamTools/ToolTransform.py:437
msgid "Rotate transformation can not be done for a value of 0."
msgstr "Rotate transformation can not be done for a value of 0."

#: flatcamTools/ToolTransform.py:476 flatcamTools/ToolTransform.py:499
msgid "Scale transformation can not be done for a factor of 0 or 1."
msgstr "Scale transformation can not be done for a factor of 0 or 1."

#: flatcamTools/ToolTransform.py:515 flatcamTools/ToolTransform.py:526
msgid "Offset transformation can not be done for a value of 0."
msgstr "Offset transformation can not be done for a value of 0."

#: flatcamTools/ToolTransform.py:542
msgid "No object selected. Please Select an object to rotate!"
msgstr "No object selected. Please Select an object to rotate!"

#: flatcamTools/ToolTransform.py:570
msgid "CNCJob objects can't be rotated."
msgstr "CNCJob objects can't be rotated."

#: flatcamTools/ToolTransform.py:578
msgid "Rotate done"
msgstr "Rotate done"

#: flatcamTools/ToolTransform.py:583 flatcamTools/ToolTransform.py:658
#: flatcamTools/ToolTransform.py:713 flatcamTools/ToolTransform.py:772
#: flatcamTools/ToolTransform.py:808
msgid "Due of"
msgstr "Due of"

#: flatcamTools/ToolTransform.py:583 flatcamTools/ToolTransform.py:658
#: flatcamTools/ToolTransform.py:713 flatcamTools/ToolTransform.py:772
#: flatcamTools/ToolTransform.py:808
msgid "action was not executed."
msgstr "action was not executed."

#: flatcamTools/ToolTransform.py:595
msgid "No object selected. Please Select an object to flip"
msgstr "No object selected. Please Select an object to flip"

#: flatcamTools/ToolTransform.py:630
msgid "CNCJob objects can't be mirrored/flipped."
msgstr "CNCJob objects can't be mirrored/flipped."

#: flatcamTools/ToolTransform.py:668
msgid "Skew transformation can not be done for 0, 90 and 180 degrees."
msgstr "Skew transformation can not be done for 0, 90 and 180 degrees."

#: flatcamTools/ToolTransform.py:673
msgid "No object selected. Please Select an object to shear/skew!"
msgstr "No object selected. Please Select an object to shear/skew!"

#: flatcamTools/ToolTransform.py:695
msgid "CNCJob objects can't be skewed."
msgstr "CNCJob objects can't be skewed."

#: flatcamTools/ToolTransform.py:708
msgid "Skew on the"
msgstr "Skew on the"

#: flatcamTools/ToolTransform.py:708 flatcamTools/ToolTransform.py:768
#: flatcamTools/ToolTransform.py:803
msgid "axis done"
msgstr "axis done"

#: flatcamTools/ToolTransform.py:725
msgid "No object selected. Please Select an object to scale!"
msgstr "No object selected. Please Select an object to scale!"

#: flatcamTools/ToolTransform.py:758
msgid "CNCJob objects can't be scaled."
msgstr "CNCJob objects can't be scaled."

#: flatcamTools/ToolTransform.py:768
msgid "Scale on the"
msgstr "Scale on the"

#: flatcamTools/ToolTransform.py:780
msgid "No object selected. Please Select an object to offset!"
msgstr "No object selected. Please Select an object to offset!"

#: flatcamTools/ToolTransform.py:789
msgid "CNCJob objects can't be offset."
msgstr "CNCJob objects can't be offset."

#: flatcamTools/ToolTransform.py:803
msgid "Offset on the"
msgstr "Offset on the"

#: tclCommands/TclCommandBbox.py:70 tclCommands/TclCommandNregions.py:68
msgid "Expected FlatCAMGerber or FlatCAMGeometry, got"
msgstr "Expected FlatCAMGerber or FlatCAMGeometry, got"

#: tclCommands/TclCommandBounds.py:64 tclCommands/TclCommandBounds.py:68
msgid "Expected a list of objects names separated by comma. Got"
msgstr "Expected a list of objects names separated by comma. Got"

#: tclCommands/TclCommandBounds.py:79
msgid "TclCommand Bounds done."
msgstr "TclCommand Bounds done."

#: tclCommands/TclCommandCopperClear.py:237 tclCommands/TclCommandPaint.py:235
msgid "Expected -box <value>."
msgstr "Expected -box <value>."

#: tclCommands/TclCommandCopperClear.py:246 tclCommands/TclCommandPaint.py:244
#: tclCommands/TclCommandScale.py:63
msgid "Could not retrieve box object"
msgstr "Could not retrieve box object"

#: tclCommands/TclCommandCopperClear.py:268
msgid ""
"None of the following args: 'ref', 'all' were found or none was set to 1.\n"
"Copper clearing failed."
msgstr ""
"None of the following args: 'ref', 'all' were found or none was set to 1.\n"
"Copper clearing failed."

#: tclCommands/TclCommandPaint.py:212
msgid "Expected -x <value> and -y <value>."
msgstr "Expected -x <value> and -y <value>."

#: tclCommands/TclCommandPaint.py:263
msgid ""
"There was none of the following args: 'ref', 'single', 'all'.\n"
"Paint failed."
msgstr ""
"There was none of the following args: 'ref', 'single', 'all'.\n"
"Paint failed."

#: tclCommands/TclCommandScale.py:83
msgid "Expected -origin <origin> or -origin <min_bounds> or -origin <center>."
msgstr "Expected -origin <origin> or -origin <min_bounds> or -origin <center>."

#: tclCommands/TclCommandScale.py:92
msgid "Expected -x <value> -y <value>."
msgstr "Expected -x <value> -y <value>."

#: tclCommands/TclCommandSetOrigin.py:87
msgid "Expected a pair of (x, y) coordinates. Got"
msgstr "Expected a pair of (x, y) coordinates. Got"

#: tclCommands/TclCommandSetOrigin.py:94
msgid "Origin set by offsetting all loaded objects with "
msgstr "Origin set by offsetting all loaded objects with "

#: tclCommands/TclCommandSubtractRectangle.py:49
msgid "No Geometry name in args. Provide a name and try again."
msgstr "No Geometry name in args. Provide a name and try again."

#~ msgid "{l_save}/FlatCAM_Bookmarks_{date}"
#~ msgstr "{l_save}/FlatCAM_Bookmarks_{date}"

#~ msgid "Could not load bookamrks file."
#~ msgstr "Could not load bookamrks file."

#~ msgid "Could not load factory defaults file."
#~ msgstr "Could not load factory defaults file."

#~ msgid "Failed to parse factory defaults file."
#~ msgstr "Failed to parse factory defaults file."

#~ msgid "Failed to write factory defaults to file."
#~ msgstr "Failed to write factory defaults to file."

#~ msgid "Factory defaults saved."
#~ msgstr "Factory defaults saved."

#~ msgid "&Help"
#~ msgstr "&Help"

#~ msgid "FlatCAM.org"
#~ msgstr "FlatCAM.org"

#~ msgid "tool = tool number"
#~ msgstr "tool = tool number"

#~ msgid "tooldia = tool diameter"
#~ msgstr "tooldia = tool diameter"

#~ msgid "t_drills = for Excellon, total number of drills"
#~ msgstr "t_drills = for Excellon, total number of drills"

#~ msgid "x_toolchange = X coord for Toolchange"
#~ msgstr "x_toolchange = X coord for Toolchange"

#~ msgid "z_toolchange = Z coord for Toolchange"
#~ msgstr "z_toolchange = Z coord for Toolchange"

#~ msgid "z_depthpercut = the step value for multidepth cut"
#~ msgstr "z_depthpercut = the step value for multidepth cut"

#~ msgid "spindlesspeed = the value for the spindle speed"
#~ msgstr "spindlesspeed = the value for the spindle speed"

#~ msgid "White"
#~ msgstr "White"

#~ msgid "Rotate Angle"
#~ msgstr "Rotate Angle"

#~ msgid "Skew_X angle"
#~ msgstr "Skew_X angle"

#~ msgid "Skew_Y angle"
#~ msgstr "Skew_Y angle"

#~ msgid "Scale_X factor"
#~ msgstr "Scale_X factor"

#~ msgid "Scale_Y factor"
#~ msgstr "Scale_Y factor"

#~ msgid "Offset_X val"
#~ msgstr "Offset_X val"

#~ msgid "Offset_Y val"
#~ msgstr "Offset_Y val"

#~ msgid " Mirror Ref. Point"
#~ msgstr " Mirror Ref. Point"

#~ msgid "The Gerber Copper Bottom file for which rules are checked."
#~ msgstr "The Gerber Copper Bottom file for which rules are checked."

#~ msgid "The Gerber Silkscreen Bottom file for which rules are checked."
#~ msgstr "The Gerber Silkscreen Bottom file for which rules are checked."

#~| msgid "Excellon file"
#~ msgid "Excellon Files"
#~ msgstr "Excellon Files"

#~ msgid "Go"
#~ msgstr "Go"

#~ msgid "There are no polygons to mark area."
#~ msgstr "There are no polygons to mark area."

#~ msgid "&Edit"
#~ msgstr "&Edit"

#~ msgid "&Options"
#~ msgstr "&Options"

#~ msgid "Measurement Tool"
#~ msgstr "Measurement Tool"

#~ msgid "Margin value is missing or wrong format. Add it and retry."
#~ msgstr "Margin value is missing or wrong format. Add it and retry."

#~ msgid "Gap size value is missing or wrong format. Add it and retry."
#~ msgstr "Gap size value is missing or wrong format. Add it and retry."

#~ msgid "Measurement"
#~ msgstr "Measurement"

#~ msgid "Meas. Tool"
#~ msgstr "Meas. Tool"

#~ msgid "Not available with the current Graphic Engine Legacy(2D)."
#~ msgstr "Not available with the current Graphic Engine Legacy(2D)."

#~ msgid "ToolMove.on_left_click()"
#~ msgstr "ToolMove.on_left_click()"

#~ msgid "on_paint_button_click"
#~ msgstr "on_paint_button_click"

#~ msgid "PaintTool.paint_poly()"
#~ msgstr "PaintTool.paint_poly()"

#~ msgid "ToolSolderPaste.on_view_gcode()"
#~ msgstr "ToolSolderPaste.on_view_gcode()"

#~ msgid "App.on_fileopenscript() -->"
#~ msgstr "App.on_fileopenscript() -->"

#~ msgid "<span style=\"color:green;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:green;\"><b>%s</b></span>"

#~ msgid "<span style=\"color:red;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:red;\"><b>%s</b></span>"

#~ msgid "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() -->"
#~ msgstr "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() -->"

#~ msgid "FlatCAMCNNJob.on_edit_code_click() -->"
#~ msgstr "FlatCAMCNNJob.on_edit_code_click() -->"

#~ msgid ""
#~ "toolbars, key shortcuts or even dragging and dropping the files on the GUI"
#~ msgstr ""
#~ "toolbars, key shortcuts or even dragging and dropping the files on the GUI"

#~ msgid ""
#~ "You can also load a FlatCAM project by double clicking on the project "
#~ "file, drag"
#~ msgstr ""
#~ "You can also load a FlatCAM project by double clicking on the project "
#~ "file, drag"

#~ msgid ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on"
#~ msgstr ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on"

#~ msgid "SELECTED TAB"
#~ msgstr "SELECTED TAB"

#~ msgid "more simpler is to double click the object name in the Project Tab"
#~ msgstr "more simpler is to double click the object name in the Project Tab"

#~ msgid "will be updated with the object properties according to"
#~ msgstr "will be updated with the object properties according to"

#~ msgid "kind: Gerber, Excellon, Geometry or CNCJob object"
#~ msgstr "kind: Gerber, Excellon, Geometry or CNCJob object"

#~ msgid ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the"
#~ msgstr ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the"

#~ msgid "and populate it even if it was out of focus"
#~ msgstr "and populate it even if it was out of focus"

#~ msgid "Gerber/Excellon Object"
#~ msgstr "Gerber/Excellon Object"

#~ msgid "Change Parameter"
#~ msgstr "Change Parameter"

#~ msgid "Add tools (change param in Selected Tab)"
#~ msgstr "Add tools (change param in Selected Tab)"

#~ msgid "Generate CNCJob"
#~ msgstr "Generate CNCJob"

#~ msgid "CNCJob Object"
#~ msgstr "CNCJob Object"

#~ msgid ""
#~ "Verify GCode (through Edit CNC Code) and/or append/prepend to GCode "
#~ "(again, done in"
#~ msgstr ""
#~ "Verify GCode (through Edit CNC Code) and/or append/prepend to GCode "
#~ "(again, done in"

#~ msgid "Shortcuts List"
#~ msgstr "Shortcuts List"

#~ msgid "or through"
#~ msgstr "or through"

#~ msgid "own key shortcut"
#~ msgstr "own key shortcut"

#~ msgid "polygons"
#~ msgstr "polygons"

#~ msgid "geo"
#~ msgstr "geo"

#~ msgid "Start"
#~ msgstr "Start"

#~ msgid "Stop"
#~ msgstr "Stop"

#~ msgid "Generating panel ..."
#~ msgstr "Generating panel ..."

#~ msgid "Spawning copies"
#~ msgstr "Spawning copies"

#~ msgid "Parsing tool"
#~ msgstr "Parsing tool"

#~ msgid ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"
#~ msgstr ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"

#~ msgid "Wrong optimization type selected."
#~ msgstr "Wrong optimization type selected."

#~ msgid "FILE ASSOCIATIONS"
#~ msgstr "FILE ASSOCIATIONS"

#~ msgid "Advanced Param."
#~ msgstr "Advanced Param."

#~ msgid "MH"
#~ msgstr "MH"

#~ msgid "Feedrate (Plunge)"
#~ msgstr "Feedrate (Plunge)"

#~ msgid ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."
#~ msgstr ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."

#~ msgid ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."
#~ msgstr ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."

#~ msgid "Manufacturing"
#~ msgstr "Manufacturing"

#~ msgid "Function"
#~ msgstr "Function"

#~ msgid ""
#~ "Juan Pablo Caram <BR><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR><Br>and many others found <a href = "
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here."
#~ "</a><BR><BR>"
#~ msgstr ""
#~ "Juan Pablo Caram <BR><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR><Br>and many others found <a href = "
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here."
#~ "</a><BR><BR>"

#~ msgid ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "
#~ msgstr ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "

#~ msgid "Run Script ...\tSHIFT+S"
#~ msgstr "Run Script ...\tSHIFT+S"

#~| msgid ""
#~| "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) "
#~| "- {arch} <BR><BR>2D Computer-Aided Printed Circuit "
#~| "Board<BR>Manufacturing.<BR><BR>(c) 2014-2019 <B>Juan Pablo Caram</"
#~| "B><BR><BR><B> Main Contributors:</B><BR>Denis Hayrullin<BR>Kamil "
#~| "Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and many others found <a "
#~| "href = \"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED"
#~| "\">here.</a><BR><BR>Development is done <a href = \"https://bitbucket."
#~| "org/jpcgt/flatcam/src/Beta/\">here.</a><BR>DOWNLOAD area <a href = "
#~| "\"https://bitbucket.org/jpcgt/flatcam/downloads/\">here.</a><BR>"
#~ msgid ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"
#~ msgstr ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"

#~| msgid "[ERROR_NOTCL] Expected a FlatCAMGeometry, got %s"
#~ msgid "Expected a FlatCAMGeometry, got %s"
#~ msgstr "Expected a FlatCAMGeometry, got %s"

#~ msgid "Saved to: %s"
#~ msgstr "Saved to: %s"

#~ msgid "[WARNING_NOTCL] Adding Tool cancelled ..."
#~ msgstr "[WARNING_NOTCL] Adding Tool cancelled ..."

#~ msgid "%s"
#~ msgstr "%s"

#~| msgid "[ERROR]App.on_view_source() -->%s"
#~ msgid "App.on_view_source() -->"
#~ msgstr "App.on_view_source() -->"

#~ msgid "[success] Name changed from {old} to {new}"
#~ msgstr "[success] Name changed from {old} to {new}"

#~| msgid ""
#~| "[ERROR_NOTCL] Failed.\n"
#~| "%s"
#~ msgid "[ERROR_NOTCL] %s"
#~ msgstr "[ERROR_NOTCL] %s"

#~ msgid "Editor %s"
#~ msgstr "Editor %s"

#~ msgid "[success] Done. Path completed."
#~ msgstr "[success] Done. Path completed."

#~ msgid "[success] Paint done."
#~ msgstr "[success] Paint done."

#~ msgid "About"
#~ msgstr "About"

#~| msgid ""
#~| "<b>General Shortcut list</b><br>\n"
#~| "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" "
#~| "style=\"width:283px\">\n"
#~| "                <tbody>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~| "strong></td>\n"
#~| "                        <td width=\"194\"><span style=\"color:"
#~| "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>1</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>2</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>3</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>B</strong></td>\n"
#~| "                        <td>&nbsp;New Gerber</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>E</strong></td>\n"
#~| "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>G</strong></td>\n"
#~| "                        <td>&nbsp;Grid On/Off</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>J</strong></td>\n"
#~| "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>L</strong></td>\n"
#~| "                        <td>&nbsp;New Excellon</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>M</strong></td>\n"
#~| "                        <td>&nbsp;Move Obj</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>N</strong></td>\n"
#~| "                        <td>&nbsp;New Geometry</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>O</strong></td>\n"
#~| "                        <td>&nbsp;Set Origin</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~| "                        <td>&nbsp;Change Units</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>P</strong></td>\n"
#~| "                        <td>&nbsp;Open Properties Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>R</strong></td>\n"
#~| "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>S</strong></td>\n"
#~| "                        <td>&nbsp;Shell Toggle</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>T</strong></td>\n"
#~| "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~| "Tab or in Tools NCC or Tools Paint)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>V</strong></td>\n"
#~| "                        <td>&nbsp;Zoom Fit</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>X</strong></td>\n"
#~| "                        <td>&nbsp;Flip on X_axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~| "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Zoom Out</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Zoom In</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
#~| "                        <td>&nbsp;Select All</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
#~| "                        <td>&nbsp;Copy Obj</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~| "                        <td>&nbsp;Open Excellon File</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
#~| "                        <td>&nbsp;Open Gerber File</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
#~| "                        <td>&nbsp;New Project</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~| "                        <td>&nbsp;Measurement Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
#~| "                        <td>&nbsp;Open Project</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~| "                        <td>&nbsp;Save Project As</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+F10</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
#~| "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
#~| "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
#~| "                        <td>&nbsp;Toggle the axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
#~| "                        <td>&nbsp;Open Preferences Window</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
#~| "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
#~| "                        <td>&nbsp;Run a Script</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
#~| "                        <td>&nbsp;Toggle the workspace</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~| "                        <td>&nbsp;Skew on X axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~| "                        <td>&nbsp;Skew on Y axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
#~| "                        <td>&nbsp;Calculators Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
#~| "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
#~| "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
#~| "                        <td>&nbsp;Film PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~| "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
#~| "                        <td>&nbsp;Paint Area Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
#~| "                        <td>&nbsp;PDF Import Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~| "                        <td>&nbsp;Transformations Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
#~| "                        <td>&nbsp;View File Source</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
#~| "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
#~| "                        <td>&nbsp;Enable all Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
#~| "                        <td>&nbsp;Disable all Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
#~| "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
#~| "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~| "                        <td>&nbsp;Open Online Manual</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~| "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~| "                        <td>&nbsp;Delete Object</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~| "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~| "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~| "(Left Side)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~| "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~| "                        <td>&nbsp;Deselects all objects</td>\n"
#~| "                    </tr>\n"
#~| "                </tbody>\n"
#~| "            </table>\n"
#~| "    \n"
#~| "            "
#~ msgid ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+ALT+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "
#~ msgstr ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+ALT+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[success] Done."
#~ msgstr "[success] Done."

#~ msgid "[WARNING_NOTCL] Cancelled."
#~ msgstr "[WARNING_NOTCL] Cancelled."

#~ msgid "[success] Added new tool with dia: {dia} {units}"
#~ msgstr "[success] Added new tool with dia: {dia} {units}"

#~ msgid "[WARNING_NOTCL] Application is saving the project. Please wait ..."
#~ msgstr "[WARNING_NOTCL] Application is saving the project. Please wait ..."

#~ msgid "<b>%s:</b>"
#~ msgstr "<b>%s:</b>"

#~ msgid "%s:"
#~ msgstr "%s:"

#~| msgid "[ERROR_NOTCL] Object not found: %s"
#~ msgid "Object not found: %s"
#~ msgstr "Object not found: %s"

#~ msgid "[success] Opened: %s"
#~ msgstr "[success] Opened: %s"

#~ msgid "[success] Paint All Done."
#~ msgstr "[success] Paint All Done."

#~| msgid ""
#~| "[ERROR] Could not do Paint All. Try a different combination of "
#~| "parameters. Or a different Method of paint\n"
#~| "%s"
#~ msgid ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"
#~ msgstr ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"

#~| msgid "[success] Paint All Done."
#~ msgid "[success] Paint Area Done."
#~ msgstr "[success] Paint Area Done."

#~ msgid "Generating panel ... Please wait."
#~ msgstr "Generating panel ... Please wait."

#~ msgid "...proccessing... [%s]"
#~ msgstr "...proccessing... [%s]"

#~ msgid "Parsing aperture %s geometry ..."
#~ msgstr "Parsing aperture %s geometry ..."

#~ msgid "[success] Skew on the %s axis done ..."
#~ msgstr "[success] Skew on the %s axis done ..."

#~ msgid "[ERROR_NOTCL] Could not load defaults file."
#~ msgstr "[ERROR_NOTCL] Could not load defaults file."

#~ msgid "[ERROR_NOTCL] Failed to parse defaults file."
#~ msgstr "[ERROR_NOTCL] Failed to parse defaults file."

#~ msgid "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"
#~ msgstr "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"

#~ msgid "[success] Defaults saved."
#~ msgstr "[success] Defaults saved."

#~ msgid "[success] Converted units to %s"
#~ msgstr "[success] Converted units to %s"

#~ msgid "[WARNING_NOTCL] Export Code cancelled."
#~ msgstr "[WARNING_NOTCL] Export Code cancelled."

#~ msgid "[success] Origin set ..."
#~ msgstr "[success] Origin set ..."

#~ msgid "[success] Skew on X axis done."
#~ msgstr "[success] Skew on X axis done."

#~ msgid "[success] Skew on Y axis done."
#~ msgstr "[success] Skew on Y axis done."

#~ msgid "[success] New Grid added ..."
#~ msgstr "[success] New Grid added ..."

#~ msgid "[WARNING_NOTCL] Open Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Open Gerber cancelled."

#~ msgid "[WARNING_NOTCL] Open G-Code cancelled."
#~ msgstr "[WARNING_NOTCL] Open G-Code cancelled."

#~ msgid "[WARNING_NOTCL] Open Project cancelled."
#~ msgstr "[WARNING_NOTCL] Open Project cancelled."

#~ msgid "[WARNING_NOTCL] Open Config cancelled."
#~ msgstr "[WARNING_NOTCL] Open Config cancelled."

#~ msgid "[WARNING_NOTCL] No object selected."
#~ msgstr "[WARNING_NOTCL] No object selected."

#~ msgid "[WARNING_NOTCL] Export SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Export SVG cancelled."

#~ msgid "[WARNING_NOTCL] Export Excellon cancelled."
#~ msgstr "[WARNING_NOTCL] Export Excellon cancelled."

#~ msgid "[WARNING_NOTCL] Export Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Export Gerber cancelled."

#~ msgid "[WARNING_NOTCL] Export DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Export DXF cancelled."

#~ msgid "[WARNING_NOTCL] Open SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Open SVG cancelled."

#~ msgid "[WARNING_NOTCL] Open DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Open DXF cancelled."

#~ msgid "[WARNING_NOTCL] No object Box. Using instead %s"
#~ msgstr "[WARNING_NOTCL] No object Box. Using instead %s"

#~ msgid "[ERROR_NOTCL] Failed to parse file: {name}. {error}"
#~ msgstr "[ERROR_NOTCL] Failed to parse file: {name}. {error}"

#~ msgid "[ERROR_NOTCL] An internal error has occurred. See shell.\n"
#~ msgstr "[ERROR_NOTCL] An internal error has occurred. See shell.\n"

#~ msgid "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."
#~ msgstr "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."

#~ msgid ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."
#~ msgstr ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."

#~ msgid "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."
#~ msgstr "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."

#~ msgid "[ERROR_NOTCL] Wrong value format entered, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered, use a number."

#~ msgid "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."
#~ msgstr "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."

#~ msgid "[WARNING_NOTCL] Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL] Export Machine Code cancelled ..."

#~ msgid "[WARNING_NOTCL] No such file or directory"
#~ msgstr "[WARNING_NOTCL] No such file or directory"

#~ msgid "[ERROR_NOTCL] The value is mistyped. Check the value. %s"
#~ msgstr "[ERROR_NOTCL] The value is mistyped. Check the value. %s"

#~ msgid "[ERROR_NOTCL] Cancelled."
#~ msgstr "[ERROR_NOTCL] Cancelled."

#~ msgid "Tool Dia:"
#~ msgstr "Tool Dia:"

#~ msgid "Nr of drills:"
#~ msgstr "Nr of drills:"

#~ msgid "Direction:"
#~ msgstr "Direction:"

#~ msgid "Pitch:"
#~ msgstr "Pitch:"

#~ msgid "Length:"
#~ msgstr "Length:"

#~ msgid "Nr of slots:"
#~ msgstr "Nr of slots:"

#~ msgid "[success] Deleted tool with dia: {del_dia} {units}"
#~ msgstr "[success] Deleted tool with dia: {del_dia} {units}"

#~ msgid "Tool dia:"
#~ msgstr "Tool dia:"

#~ msgid "Overlap Rate:"
#~ msgstr "Overlap Rate:"

#~ msgid "Method:"
#~ msgstr "Method:"

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."

#~ msgid "[success] Flip on the Y axis done ..."
#~ msgstr "[success] Flip on the Y axis done ..."

#~ msgid "[success] Flip on the X axis done ..."
#~ msgstr "[success] Flip on the X axis done ..."

#~ msgid "[success] Offset on the %s axis done ..."
#~ msgstr "[success] Offset on the %s axis done ..."

#~ msgid ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"
#~ msgstr ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"

#~ msgid "Clear GUI Settings:"
#~ msgstr "Clear GUI Settings:"

#~ msgid "Duration:"
#~ msgstr "Duration:"

#~ msgid "Fast Plunge:"
#~ msgstr "Fast Plunge:"

#~ msgid "Linear Dir.:"
#~ msgstr "Linear Dir.:"

#~ msgid "Plot kind:"
#~ msgstr "Plot kind:"

#~ msgid ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."
#~ msgstr ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."

#~ msgid ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."
#~ msgstr ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."

#~ msgid "[success] Gerber %s was mirrored..."
#~ msgstr "[success] Gerber %s was mirrored..."

#~ msgid "[success] Excellon %s was mirrored..."
#~ msgstr "[success] Excellon %s was mirrored..."

#~ msgid "[success] Geometry %s was mirrored..."
#~ msgstr "[success] Geometry %s was mirrored..."

#~ msgid "[WARNING_NOTCL] No object(s) selected."
#~ msgstr "[WARNING_NOTCL] No object(s) selected."

#~ msgid "[success] %s object was moved ..."
#~ msgstr "[success] %s object was moved ..."

#~ msgid "[WARNING_NOTCL] Object(s) not selected"
#~ msgstr "[WARNING_NOTCL] Object(s) not selected"

#~ msgid "[WARNING_NOTCL] Buffering ..."
#~ msgstr "[WARNING_NOTCL] Buffering ..."

#~ msgid "[success] Non-Copper Clearing with ToolDia = %s started."
#~ msgstr "[success] Non-Copper Clearing with ToolDia = %s started."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"

#~ msgid "[success] NCC Tool finished."
#~ msgstr "[success] NCC Tool finished."

#~ msgid ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."
#~ msgstr ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."

#~ msgid "[success] Non-Copper Rest Clearing with ToolDia = %s started."
#~ msgstr "[success] Non-Copper Rest Clearing with ToolDia = %s started."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"

#~ msgid ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."
#~ msgstr ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."

#~ msgid "[WARNING_NOTCL] Open PDF cancelled."
#~ msgstr "[WARNING_NOTCL] Open PDF cancelled."

#~ msgid "[ERROR_NOTCL] Open PDF file failed."
#~ msgstr "[ERROR_NOTCL] Open PDF file failed."

#~ msgid "[success] Rendered: %s"
#~ msgstr "[success] Rendered: %s"

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."
#~ msgstr ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."

#~ msgid ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."
#~ msgstr ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."

#~ msgid "[WARNING_NOTCL]No object Box. Using instead %s"
#~ msgstr "[WARNING_NOTCL]No object Box. Using instead %s"

#~ msgid "[success] Imported: %s"
#~ msgstr "[success] Imported: %s"

#~ msgid "[ERROR_NOTCL] Generating new object failed."
#~ msgstr "[ERROR_NOTCL] Generating new object failed."

#~ msgid "[success] Created: %s"
#~ msgstr "[success] Created: %s"

#~ msgid "[success] Rotate done ..."
#~ msgstr "[success] Rotate done ..."

#~ msgid ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."
#~ msgstr ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."
#~ msgstr ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."

#~ msgid "Geometry object to be painted.                        "
#~ msgstr "Geometry object to be painted.                        "

#~ msgid ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."
#~ msgstr ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."

#~ msgid "<b>Apertures:</b>"
#~ msgstr "<b>Apertures:</b>"

#~ msgid "Aperture Code:"
#~ msgstr "Aperture Code:"

#~ msgid "<b>Languages:</b>"
#~ msgstr "<b>Languages:</b>"

#~ msgid "Width (# passes):"
#~ msgstr "Width (# passes):"

#~| msgid "<b>Clear non-copper:</b>"
#~ msgid "Clear non-copper"
#~ msgstr "Clear non-copper"

#~ msgid "Rounded corners"
#~ msgstr "Rounded corners"

#~ msgid ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."
#~ msgstr ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."

#~ msgid "<b>Bounding Box:</b>"
#~ msgstr "<b>Bounding Box:</b>"

#~ msgid "<b>Units</b>:"
#~ msgstr "<b>Units</b>:"

#~ msgid "<b>Zeros</b>:"
#~ msgstr "<b>Zeros</b>:"

#~ msgid "INCH:"
#~ msgstr "INCH:"

#~ msgid "Tool change:"
#~ msgstr "Tool change:"

#~ msgid "Toolchange Z position."
#~ msgstr "Toolchange Z position."

#~ msgid "Feedrate:"
#~ msgstr "Feedrate:"

#~ msgid ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."
#~ msgstr ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."

#~ msgid "<b>Gcode:    </b>"
#~ msgstr "<b>Gcode:    </b>"

#~ msgid "Offset Z:"
#~ msgstr "Offset Z:"

#~ msgid "<b>Slots:</b>"
#~ msgstr "<b>Slots:</b>"

#~ msgid "<b>Create CNC Job:</b>"
#~ msgstr "<b>Create CNC Job:</b>"

#~ msgid "Multidepth"
#~ msgstr "Multidepth"

#~ msgid "Multidepth usage: True or False."
#~ msgstr "Multidepth usage: True or False."

#~ msgid ""
#~ "The postprocessor file that dictates\n"
#~ "Machine Code output."
#~ msgstr ""
#~ "The postprocessor file that dictates\n"
#~ "Machine Code output."

#~ msgid "Display Annotation:"
#~ msgstr "Display Annotation:"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."

#~ msgid ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."
#~ msgstr ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."

#~ msgid "Offset:"
#~ msgstr "Offset:"

#~ msgid ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."
#~ msgstr ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."

#~ msgid ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."
#~ msgstr ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."

#~ msgid "Create a convex shape surrounding the entire PCB."
#~ msgstr "Create a convex shape surrounding the entire PCB."

#~ msgid ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."
#~ msgstr ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."

#~ msgid ""
#~ "How much (fraction) of the tool\n"
#~ "width to overlap each tool pass."
#~ msgstr ""
#~ "How much (fraction) of the tool\n"
#~ "width to overlap each tool pass."

#~ msgid "Panel Type:"
#~ msgstr "Panel Type:"

#~ msgid "Tip angle:"
#~ msgstr "Tip angle:"

#~ msgid "Angle for rotation. In degrees."
#~ msgstr "Angle for rotation. In degrees."

#~ msgid "Angle for Skew/Shear on X axis. In degrees."
#~ msgstr "Angle for Skew/Shear on X axis. In degrees."

#~ msgid "Angle for Skew/Shear on Y axis. In degrees."
#~ msgstr "Angle for Skew/Shear on Y axis. In degrees."

#~ msgid "XY Toolchange:"
#~ msgstr "XY Toolchange:"

#~ msgid "PostProcessors:"
#~ msgstr "PostProcessors:"

#~ msgid "<b>Scale:</b>"
#~ msgstr "<b>Scale:</b>"

#~ msgid "<b>Offset:</b>"
#~ msgstr "<b>Offset:</b>"

#~ msgid "Combine"
#~ msgstr "Combine"

#~ msgid "<b>Tools Table</b>"
#~ msgstr "<b>Tools Table</b>"

#~ msgid ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."
#~ msgstr ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."

#~ msgid ""
#~ "Z-axis position (height) for\n"
#~ "the last move."
#~ msgstr ""
#~ "Z-axis position (height) for\n"
#~ "the last move."

#~ msgid ""
#~ "The json file that dictates\n"
#~ "gcode output."
#~ msgstr ""
#~ "The json file that dictates\n"
#~ "gcode output."

#~ msgid "<b>Type:    </b>"
#~ msgstr "<b>Type:    </b>"

#~ msgid "Drills Tool dia:"
#~ msgstr "Drills Tool dia:"

#~ msgid "Slots Tool dia:"
#~ msgstr "Slots Tool dia:"

#~ msgid "<b>Tool Dia:</b>"
#~ msgstr "<b>Tool Dia:</b>"

#~ msgid "<b>Tool Data</b>"
#~ msgstr "<b>Tool Data</b>"

#~ msgid ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."
#~ msgstr ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."

#~ msgid "Feed Rate Z (Plunge):"
#~ msgstr "Feed Rate Z (Plunge):"

#~ msgid ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"
#~ msgstr ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"

#~ msgid ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."
#~ msgstr ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."

#~ msgid "Cut over 1st pt"
#~ msgstr "Cut over 1st pt"

#~ msgid "<b>Paint Area:</b>"
#~ msgstr "<b>Paint Area:</b>"

#~ msgid "<b>CNC Tools Table</b>"
#~ msgstr "<b>CNC Tools Table</b>"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."

#~ msgid ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."
#~ msgstr ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."

#~ msgid "Object:"
#~ msgstr "Object:"

#~ msgid "Units:"
#~ msgstr "Units:"

#~ msgid ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."
#~ msgstr ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."

#~ msgid "Geometry:"
#~ msgstr "Geometry:"

#~ msgid ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."
#~ msgstr ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."

#~ msgid "<b>Excellon Format:</b>"
#~ msgstr "<b>Excellon Format:</b>"

#~ msgid "<b>Tools:</b>"
#~ msgstr "<b>Tools:</b>"

#~ msgid "<b>Export G-Code:</b>"
#~ msgstr "<b>Export G-Code:</b>"

#~ msgid "How to select the polygons to paint."
#~ msgstr "How to select the polygons to paint."

#~ msgid "<b>V-Shape Tool Calculator:</b>"
#~ msgstr "<b>V-Shape Tool Calculator:</b>"

#~ msgid "<b>ElectroPlating Calculator:</b>"
#~ msgstr "<b>ElectroPlating Calculator:</b>"

#~ msgid "<b>Name:</b>"
#~ msgstr "<b>Name:</b>"

#~ msgid "<b>Plot kind:</b>"
#~ msgstr "<b>Plot kind:</b>"

#~ msgid "<b>Display Annotation:</b>"
#~ msgstr "<b>Display Annotation:</b>"

#~ msgid "<b>GERBER:</b>"
#~ msgstr "<b>GERBER:</b>"

#~ msgid "<b>EXCELLON:</b>"
#~ msgstr "<b>EXCELLON:</b>"

#~ msgid "<b>GEOMETRY</b>:"
#~ msgstr "<b>GEOMETRY</b>:"

#~ msgid "<b>Panel Type:</b>"
#~ msgstr "<b>Panel Type:</b>"

#~ msgid "<b>Excellon format:</b>"
#~ msgstr "<b>Excellon format:</b>"

#~ msgid "<b>Gerber Objects</b>"
#~ msgstr "<b>Gerber Objects</b>"

#~ msgid "<b>Geometry Objects</b>"
#~ msgstr "<b>Geometry Objects</b>"

#~ msgid "Save &Defaults"
#~ msgstr "Save &Defaults"

#~ msgid "Line"
#~ msgstr "Line"

#~ msgid "Tool dia:                   "
#~ msgstr "Tool dia:                   "

#~ msgid ""
#~ "The diameter of the cutting\n"
#~ "tool.."
#~ msgstr ""
#~ "The diameter of the cutting\n"
#~ "tool.."

#~ msgid "Disable"
#~ msgstr "Disable"

#~ msgid "[WARNING_NOTCL] Move cancelled. No shape selected."
#~ msgstr "[WARNING_NOTCL] Move cancelled. No shape selected."

#~ msgid "Click on the Destination point..."
#~ msgstr "Click on the Destination point..."

#~ msgid "Copy as &Geom"
#~ msgstr "Copy as &Geom"

#~ msgid "Ap. Scale Factor:"
#~ msgstr "Ap. Scale Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."

#~ msgid "Ap. Buffer Factor:"
#~ msgstr "Ap. Buffer Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."

#~ msgid "In"
#~ msgstr "In"

#~ msgid "Out"
#~ msgstr "Out"

#~ msgid "Custom"
#~ msgstr "Custom"

#~ msgid "Pos"
#~ msgstr "Pos"

#~ msgid "Neg"
#~ msgstr "Neg"

#~ msgid "Solid   "
#~ msgstr "Solid   "

#~ msgid "M-Color   "
#~ msgstr "M-Color   "

#~ msgid "Click on CENTER ..."
#~ msgstr "Click on CENTER ..."

#~ msgid "[success] Done. Region completed."
#~ msgstr "[success] Done. Region completed."

#~ msgid "Del Aperture:"
#~ msgstr "Del Aperture:"

#~ msgid ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."
#~ msgstr ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."

#~ msgid "Save && Close Edit"
#~ msgstr "Save && Close Edit"

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[ERROR_NOTCL]Could not load defaults file."
#~ msgstr "[ERROR_NOTCL]Could not load defaults file."

#~ msgid ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."
#~ msgstr ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."

#~ msgid "[WARNING_NOTCL]Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL]Export Machine Code cancelled ..."

#~ msgid "[success] GUI settings deleted ..."
#~ msgstr "[success] GUI settings deleted ..."

#~ msgid "Scale Factor:"
#~ msgstr "Scale Factor:"

#~ msgid "Buffer Factor:"
#~ msgstr "Buffer Factor:"

#~ msgid "<b>Generate new Gerber Object:</b>"
#~ msgstr "<b>Generate new Gerber Object:</b>"

#~ msgid "Will generate a new Gerber object from the changed apertures."
#~ msgstr "Will generate a new Gerber object from the changed apertures."

#~ msgid ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."
#~ msgstr ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."

#~ msgid "[success]Offset on the %s axis done ..."
#~ msgstr "[success]Offset on the %s axis done ..."

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_move = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Project_%s"

#~ msgid "tool_tab"
#~ msgstr "tool_tab"
