# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2019-07-20 20:52+0300\n"
"PO-Revision-Date: 2019-07-20 20:55+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: ro\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.2.3\n"
"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n==0 || (n!=1 && n%100>=1 && n"
"%100<=19) ? 1 : 2);\n"
"X-Poedit-Basepath: ../../..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: tests\n"
"X-Poedit-SearchPathExcluded-2: doc\n"

#: FlatCAMApp.py:926
msgid "[ERROR] Could not find the Language files. The App strings are missing."
msgstr ""
"[ERROR] Nu am gasit fişierele cu traduceri. Mesajele aplicaţiei lipsesc."

#: FlatCAMApp.py:1837
msgid ""
"(Type help to get started)\n"
"\n"
msgstr ""
"(Tastează help pt. a începe)\n"
"\n"

#: FlatCAMApp.py:2022 ObjectCollection.py:80 flatcamTools/ToolImage.py:213
#: flatcamTools/ToolPcbWizard.py:296 flatcamTools/ToolPcbWizard.py:319
msgid "Open cancelled."
msgstr "Deschidere anulată."

#: FlatCAMApp.py:2036
msgid "Open Config file failed."
msgstr "Deschiderea  fişierului de configurare a eşuat."

#: FlatCAMApp.py:2050
msgid "Open Script file failed."
msgstr "Deschiderea fişierului Script eşuat."

#: FlatCAMApp.py:2248
msgid "[WARNING_NOTCL] Select a Geometry, Gerber or Excellon Object to edit."
msgstr ""
"[WARNING_NOTCL] Selectează un obiect tip Geometrie Gerber sau Excellon "
"pentru editare."

#: FlatCAMApp.py:2258
msgid ""
"[WARNING_NOTCL] Simultanoeus editing of tools geometry in a MultiGeo "
"Geometry is not possible.\n"
"Edit only one geometry at a time."
msgstr ""
"[WARNING_NOTCL] Editarea simultană de geometrii ale uneltelor dintr-un "
"obiect tip Geometrie MultiGeo nu este posibilă.\n"
"Se poate edita numai o singură geometrie de fiecare dată."

#: FlatCAMApp.py:2313
msgid "[WARNING_NOTCL] Editor is activated ..."
msgstr "[WARNING_NOTCL] Editorul este activ. .."

#: FlatCAMApp.py:2331
msgid "Do you want to save the edited object?"
msgstr "Vrei sa salvezi obiectul editat?"

#: FlatCAMApp.py:2332 flatcamGUI/FlatCAMGUI.py:1637
msgid "Close Editor"
msgstr "Inchide Editorul"

#: FlatCAMApp.py:2335 FlatCAMApp.py:3427 FlatCAMApp.py:6013
#: FlatCAMTranslation.py:97 flatcamGUI/FlatCAMGUI.py:3760
msgid "Yes"
msgstr "Da"

#: FlatCAMApp.py:2336 FlatCAMApp.py:3428 FlatCAMApp.py:6014
#: FlatCAMTranslation.py:98 flatcamGUI/FlatCAMGUI.py:3761
msgid "No"
msgstr "Nu"

#: FlatCAMApp.py:2337 FlatCAMApp.py:3429 FlatCAMApp.py:3860 FlatCAMApp.py:6015
msgid "Cancel"
msgstr "Anuleaza"

#: FlatCAMApp.py:2364
msgid "[WARNING] Object empty after edit."
msgstr "[WARNING] Obiectul nu are date dupa editare."

#: FlatCAMApp.py:2386 FlatCAMApp.py:2405 FlatCAMApp.py:2417
msgid "[WARNING_NOTCL] Select a Gerber, Geometry or Excellon Object to update."
msgstr ""
"[WARNING_NOTCL] Selectează un obiect tip Gerber, Geometrie sau Excellon "
"pentru salvare."

#: FlatCAMApp.py:2389
#, python-format
msgid "[selected] %s is updated, returning to App..."
msgstr "[selected] %s este actualizat, întoarcere la aplicaţie."

#: FlatCAMApp.py:2754
msgid "[ERROR] Could not load defaults file."
msgstr "[ERROR] Nu am putut incărca fişierul cu valori default."

#: FlatCAMApp.py:2766
msgid "[ERROR] Failed to parse defaults file."
msgstr "[ERROR] Parsarea fişierului cu valori default a eșuat."

#: FlatCAMApp.py:2787 FlatCAMApp.py:2791
msgid "Import FlatCAM Preferences"
msgstr "Importa Preferințele FlatCAM"

#: FlatCAMApp.py:2797
msgid "[WARNING_NOTCL] FlatCAM preferences import cancelled."
msgstr "[WARNING_NOTCL] Importul preferințelor FlatCAM a eșuat."

#: FlatCAMApp.py:2805 FlatCAMApp.py:2859 FlatCAMApp.py:3306
msgid "[ERROR_NOTCL] Could not load defaults file."
msgstr ""
"[ERROR_NOTCL] Nu a fost posibilă incărcarea fişierului cu valori default."

#: FlatCAMApp.py:2813 FlatCAMApp.py:3315
msgid "[ERROR_NOTCL] Failed to parse defaults file."
msgstr "[ERROR_NOTCL] Parsarea fişierului cu valori default a eșuat."

#: FlatCAMApp.py:2816
#, python-format
msgid "[success] Imported Defaults from %s"
msgstr "[success] Valorile default au fost importate din  %s"

#: FlatCAMApp.py:2831 FlatCAMApp.py:2836
msgid "Export FlatCAM Preferences"
msgstr "Exporta Preferințele FlatCAM"

#: FlatCAMApp.py:2843
msgid "[WARNING_NOTCL] FlatCAM preferences export cancelled."
msgstr "[WARNING_NOTCL] Exportul preferințelor FlatCAM este anulat."

#: FlatCAMApp.py:2878 FlatCAMApp.py:3360
msgid "[ERROR_NOTCL] Failed to write defaults to file."
msgstr "[ERROR_NOTCL] Salvarea valorilor default intr-un fişier a eșuat."

#: FlatCAMApp.py:2931
msgid "[ERROR_NOTCL] Failed to open recent files file for writing."
msgstr ""
"[ERROR_NOTCL] Deschiderea fişierului cu >fişiere recente< pentru a fi salvat "
"a eșuat."

#: FlatCAMApp.py:3008 camlib.py:4457
msgid "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"
msgstr ""
"[ERROR_NOTCL] A apărut o eroare internă. Verifică in TCL Shell pt mai multe "
"detalii.\n"

#: FlatCAMApp.py:3009
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""
"Obiectul ({kind}) a eșuat din cauza: {error} \n"
"\n"

#: FlatCAMApp.py:3029
msgid "Converting units to "
msgstr "Se convertesc unitătile la "

#: FlatCAMApp.py:3108 FlatCAMApp.py:3111 FlatCAMApp.py:3114 FlatCAMApp.py:3117
#, python-brace-format
msgid ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"
msgstr ""
"[selected]{kind} creat/selectat: <span style=\"color:{color};\">{name}</span>"

#: FlatCAMApp.py:3211
#, python-brace-format
msgid ""
"<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
"{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
"<BR><BR>(c) 2014-2019 <B>Juan Pablo Caram</B><BR><BR><B> Main Contributors:</"
"B><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu "
"Berthomé<BR>and many others found <a href = \"https://bitbucket.org/jpcgt/"
"flatcam/pull-requests/?state=MERGED\">here.</a><BR><BR>Development is done "
"<a href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
"a><BR>DOWNLOAD area <a href = \"https://bitbucket.org/jpcgt/flatcam/"
"downloads/\">here.</a><BR>"
msgstr ""
"<font size=8><B>FlatCAM</B></font><BR>Versiunea {version} {beta} ({date}) - "
"{arch} <BR><BR>Producţie PCB in 2D asistata de calculator.<BR><BR>(c) "
"2014-2019 <B>Juan Pablo Caram</B><BR><BR><B> Contributori principali:</"
"B><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu "
"Berthomé<BR>si multi altii care pot fi gasiti aici <a href = \"https://"
"bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here.</"
"a><BR><BR>Dezvoltarea este realizata <a href = \"https://bitbucket.org/jpcgt/"
"flatcam/src/Beta/\">aici.</a><BR>Sectiunea DOWNLOAD este <a href = \"https://"
"bitbucket.org/jpcgt/flatcam/downloads/\">aici.</a><BR>"

#: FlatCAMApp.py:3364
msgid "[success] Defaults saved."
msgstr "[success] Valorile default au fost salvate."

#: FlatCAMApp.py:3385
msgid "[ERROR_NOTCL] Could not load factory defaults file."
msgstr ""
"[ERROR_NOTCL] Fişierul cu valori default de fabrică nu a putut fi deschis."

#: FlatCAMApp.py:3394
msgid "[ERROR_NOTCL] Failed to parse factory defaults file."
msgstr ""
"[ERROR_NOTCL] Parsarea fişierului cu valori default de fabrică  a eșuat."

#: FlatCAMApp.py:3408
msgid "[ERROR_NOTCL] Failed to write factory defaults to file."
msgstr ""
"[ERROR_NOTCL]] Salvarea fişierului cu valori default de fabrică intr-un "
"fişier a eșuat."

#: FlatCAMApp.py:3412
msgid "Factory defaults saved."
msgstr "Valori default de fabrică au fost salvate."

#: FlatCAMApp.py:3417 flatcamGUI/FlatCAMGUI.py:3136
msgid "[WARNING_NOTCL] Application is saving the project. Please wait ..."
msgstr "[WARNING_NOTCL] Aplicația salvează proiectul. Vă rugăm aşteptați ..."

#: FlatCAMApp.py:3422
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""
"FlatCAM are fişiere/obiecte care au fost modificate. \n"
"Dorești să Salvezi proiectul?"

#: FlatCAMApp.py:3425 FlatCAMApp.py:6011
msgid "Save changes"
msgstr "Salvează modificarile."

#: FlatCAMApp.py:3492
msgid ""
"[ERROR] Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""
"[ERROR] Fuziune eșuata. Obiectele Geometrii sunt de tipuri diferite.\n"
"Cel puțin unul este de tip Multigeo și celalalt este tip SinglGeo. O "
"posibilitate este să convertesti dintr-unul in celalalt și să reincerci "
"fuzionarea \n"
"dar un cazul conversiei de la MultiGeo to SingleGeo, se pot pierde "
"informatii și rezultatul ar putea să nu fie cel dorit. \n"
"Verifică codul G-Code generat."

#: FlatCAMApp.py:3533
msgid "[ERROR_NOTCL] Failed. Excellon joining works only on Excellon objects."
msgstr ""
"[ERROR_NOTCL] Eșuat. Fuzionarea Excellon functionează doar cu obiecte de tip "
"Excellon."

#: FlatCAMApp.py:3555
msgid "[ERROR_NOTCL] Failed. Gerber joining works only on Gerber objects."
msgstr ""
"[ERROR_NOTCL] Eșuat. Fuzionarea Gerber functionează doar cu obiecte de tip "
"Gerber ."

#: FlatCAMApp.py:3570 FlatCAMApp.py:3595
msgid "[ERROR_NOTCL] Failed. Select a Geometry Object and try again."
msgstr ""
"[ERROR_NOTCL] Eșuat. Selectează un obiect Geometrie și încearcă din nou."

#: FlatCAMApp.py:3574 FlatCAMApp.py:3599
#, python-format
msgid "[ERROR_NOTCL] Expected a FlatCAMGeometry, got %s"
msgstr "[ERROR_NOTCL] Se astepta o Geometrie FlatCAM, s-a primit %s"

#: FlatCAMApp.py:3587
msgid "[success] A Geometry object was converted to MultiGeo type."
msgstr "[success] Un obiect Geometrie a fost convertit la tipul MultiGeo."

#: FlatCAMApp.py:3613
msgid "[success] A Geometry object was converted to SingleGeo type."
msgstr "[success] Un obiect Geometrie a fost convertit la tipul SingleGeo ."

#: FlatCAMApp.py:3854
msgid "Toggle Units"
msgstr "Comută Unitati"

#: FlatCAMApp.py:3856
msgid "<B>Change project units ...</B>"
msgstr "<B>Schimbă unitătile de măsură..</B>"

#: FlatCAMApp.py:3857
msgid ""
"Changing the units of the project causes all geometrical properties of all "
"objects to be scaled accordingly.\n"
"Continue?"
msgstr ""
"Schimbarea unitătilor de măsură din proiect va face ca toate proprietătile "
"geometrice ale obiectelor sa fie scalate corespunzător.\n"
"Continuati?"

#: FlatCAMApp.py:3859 FlatCAMApp.py:4698 FlatCAMApp.py:6286 FlatCAMApp.py:6297
#: FlatCAMApp.py:6537 FlatCAMApp.py:6547
msgid "Ok"
msgstr "Ok"

#: FlatCAMApp.py:3904
#, python-format
msgid "[success] Converted units to %s"
msgstr "[success] Conversie unitati la %s"

#: FlatCAMApp.py:3915
msgid "[WARNING_NOTCL] Units conversion cancelled."
msgstr "[WARNING_NOTCL] Conversia unitatilor este anulată."

#: FlatCAMApp.py:4567
msgid "Open file"
msgstr "Deschide fişierul ..."

#: FlatCAMApp.py:4598 FlatCAMApp.py:4603
msgid "Export G-Code ..."
msgstr "Exporta G-Code ..."

#: FlatCAMApp.py:4606
msgid "[WARNING_NOTCL] Export Code cancelled."
msgstr "[WARNING_NOTCL Exportul GCode este anulat."

#: FlatCAMApp.py:4616
msgid "[WARNING] No such file or directory"
msgstr "[WARNING] Nu exista un aşa fişier sau director"

#: FlatCAMApp.py:4623
#, python-format
msgid "Saved to: %s"
msgstr "Salvat in: %s"

#: FlatCAMApp.py:4686 FlatCAMApp.py:4719 FlatCAMApp.py:4730 FlatCAMApp.py:4741
#: flatcamTools/ToolNonCopperClear.py:490 flatcamTools/ToolSolderPaste.py:767
msgid ""
"[WARNING_NOTCL] Please enter a tool diameter with non-zero value, in Float "
"format."
msgstr ""
"[WARNING_NOTCL] Introdu un diametru al uneltei valid: valoare ne-nula in "
"format Real."

#: FlatCAMApp.py:4691 FlatCAMApp.py:4724 FlatCAMApp.py:4735 FlatCAMApp.py:4746
#: flatcamGUI/FlatCAMGUI.py:3031
msgid "[WARNING_NOTCL] Adding Tool cancelled ..."
msgstr "[WARNING_NOTCL] Adăugarea unei unelte anulată ..."

#: FlatCAMApp.py:4694
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""
"Adăugarea de unelte noi functionează doar in modul Avansat.\n"
"Pentru aceasta mergi in Preferințe -> General - Activează Modul Avansat."

#: FlatCAMApp.py:4807
msgid "Object(s) deleted ..."
msgstr "Obiect(ele) șters(e)."

#: FlatCAMApp.py:4811
msgid "Failed. No object(s) selected..."
msgstr "Eșuat. Nici-un obiect nu este selectat."

#: FlatCAMApp.py:4813
msgid "Save the work in Editor and try again ..."
msgstr "Salvează continutul din Editor și încearcă din nou."

#: FlatCAMApp.py:4826
msgid "Click to set the origin ..."
msgstr "Click pentru a seta originea..."

#: FlatCAMApp.py:4838
msgid "Jump to ..."
msgstr "Sari la ..."

#: FlatCAMApp.py:4839
msgid "Enter the coordinates in format X,Y:"
msgstr "Introduceți coordonatele in format X,Y:"

#: FlatCAMApp.py:4846
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr "Coordonate gresite. Introduceți coordonatele in format X,Y."

#: FlatCAMApp.py:4864 flatcamEditors/FlatCAMExcEditor.py:2321
#: flatcamEditors/FlatCAMExcEditor.py:2328
#: flatcamEditors/FlatCAMGeoEditor.py:3648
#: flatcamEditors/FlatCAMGeoEditor.py:3662
#: flatcamEditors/FlatCAMGrbEditor.py:1040
#: flatcamEditors/FlatCAMGrbEditor.py:1141
#: flatcamEditors/FlatCAMGrbEditor.py:1409
#: flatcamEditors/FlatCAMGrbEditor.py:1666
#: flatcamEditors/FlatCAMGrbEditor.py:4071
#: flatcamEditors/FlatCAMGrbEditor.py:4085 flatcamGUI/FlatCAMGUI.py:2435
#: flatcamGUI/FlatCAMGUI.py:2447
msgid "[success] Done."
msgstr "[success] Executat."

#: FlatCAMApp.py:4996 FlatCAMApp.py:5063
msgid "[WARNING_NOTCL] No object is selected. Select an object and try again."
msgstr ""
"[WARNING_NOTCL] Nici-un obiect nu este selectat. Selectează un obiect și "
"incearcă din nou."

#: FlatCAMApp.py:5104
msgid "[success] Origin set ..."
msgstr "[success] Originea a fost setată ..."

#: FlatCAMApp.py:5124
msgid "Preferences"
msgstr "Preferințe"

#: FlatCAMApp.py:5144
msgid "[WARNING_NOTCL] No object selected to Flip on Y axis."
msgstr ""
"[WARNING_NOTCL] Nu sete nici-un obiect selectat pentru oglindire pe axa Y."

#: FlatCAMApp.py:5169
msgid "[success] Flip on Y axis done."
msgstr "[success] Oglindire pe axa Y executată."

#: FlatCAMApp.py:5171 FlatCAMApp.py:5211
#: flatcamEditors/FlatCAMGeoEditor.py:1355
#: flatcamEditors/FlatCAMGrbEditor.py:5498 flatcamTools/ToolTransform.py:747
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Flip action was not executed."
msgstr "[ERROR_NOTCL] Datorita %s, oglindirea a eșuat."

#: FlatCAMApp.py:5184
msgid "[WARNING_NOTCL] No object selected to Flip on X axis."
msgstr ""
"[WARNING_NOTCL] Nu sete nici-un obiect selectat pentru oglindire pe axa X."

#: FlatCAMApp.py:5209
msgid "[success] Flip on X axis done."
msgstr "[success] Oglindirea pe axa X executată."

#: FlatCAMApp.py:5224
msgid "[WARNING_NOTCL] No object selected to Rotate."
msgstr "[WARNING_NOTCL] Nici-un obiect selectat pentru Rotaţie."

#: FlatCAMApp.py:5227 FlatCAMApp.py:5272 FlatCAMApp.py:5303
msgid "Transform"
msgstr "Transformare"

#: FlatCAMApp.py:5227 FlatCAMApp.py:5272 FlatCAMApp.py:5303
msgid "Enter the Angle value:"
msgstr "Introduceți valoaea Unghiului:"

#: FlatCAMApp.py:5257
msgid "[success] Rotation done."
msgstr "[success] Rotaţie executată."

#: FlatCAMApp.py:5259 flatcamEditors/FlatCAMGeoEditor.py:1298
#: flatcamEditors/FlatCAMGrbEditor.py:5427 flatcamTools/ToolTransform.py:676
#, python-format
msgid "[ERROR_NOTCL] Due of %s, rotation movement was not executed."
msgstr "[ERROR_NOTCL] Datorita %s, Rotatia a eșuat."

#: FlatCAMApp.py:5270
msgid "[WARNING_NOTCL] No object selected to Skew/Shear on X axis."
msgstr "[WARNING_NOTCL] Nici-un obiect selectat pentru Deformare pe axa X."

#: FlatCAMApp.py:5291
msgid "[success] Skew on X axis done."
msgstr "[success] Deformare pe axa X executată."

#: FlatCAMApp.py:5301
msgid "[WARNING_NOTCL] No object selected to Skew/Shear on Y axis."
msgstr "[WARNING_NOTCL] Nici-un obiect selectat pentru Deformare pe axa Y."

#: FlatCAMApp.py:5322
msgid "[success] Skew on Y axis done."
msgstr "[success] Deformare pe axa Y executată."

#: FlatCAMApp.py:5392
msgid "Grid On/Off"
msgstr "Grid On/Off"

#: FlatCAMApp.py:5405 flatcamEditors/FlatCAMGeoEditor.py:937
#: flatcamEditors/FlatCAMGrbEditor.py:2424
#: flatcamEditors/FlatCAMGrbEditor.py:5016 flatcamGUI/ObjectUI.py:989
#: flatcamTools/ToolDblSided.py:160 flatcamTools/ToolDblSided.py:207
#: flatcamTools/ToolNonCopperClear.py:134 flatcamTools/ToolPaint.py:131
#: flatcamTools/ToolSolderPaste.py:115 flatcamTools/ToolSolderPaste.py:478
#: flatcamTools/ToolTransform.py:337
msgid "Add"
msgstr "Adaugă"

#: FlatCAMApp.py:5406 FlatCAMObj.py:3302
#: flatcamEditors/FlatCAMGrbEditor.py:2429 flatcamGUI/FlatCAMGUI.py:531
#: flatcamGUI/FlatCAMGUI.py:731 flatcamGUI/FlatCAMGUI.py:1635
#: flatcamGUI/FlatCAMGUI.py:1974 flatcamGUI/ObjectUI.py:1005
#: flatcamTools/ToolNonCopperClear.py:146 flatcamTools/ToolPaint.py:143
#: flatcamTools/ToolSolderPaste.py:121 flatcamTools/ToolSolderPaste.py:480
msgid "Delete"
msgstr "Șterge"

#: FlatCAMApp.py:5419
msgid "New Grid ..."
msgstr "Grid nou ..."

#: FlatCAMApp.py:5420
msgid "Enter a Grid Value:"
msgstr "Introduceti of valoare pt Grid:"

#: FlatCAMApp.py:5428 FlatCAMApp.py:5455
msgid ""
"[WARNING_NOTCL] Please enter a grid value with non-zero value, in Float "
"format."
msgstr ""
"[WARNING_NOTCL] Introduceți o valoare pentru Grila ne-nula și in format Real."

#: FlatCAMApp.py:5434
msgid "[success] New Grid added ..."
msgstr "[success] O noua valoare pt Grila a fost adăugată..."

#: FlatCAMApp.py:5437
msgid "[WARNING_NOTCL] Grid already exists ..."
msgstr "[WARNING_NOTCL] Grila există deja."

#: FlatCAMApp.py:5440
msgid "[WARNING_NOTCL] Adding New Grid cancelled ..."
msgstr "[WARNING_NOTCL] Adăugarea unei valori de Grilă a fost anulată ..."

#: FlatCAMApp.py:5462
msgid "[ERROR_NOTCL] Grid Value does not exist ..."
msgstr "[ERROR_NOTCL] Valoarea Grilei nu există ..."

#: FlatCAMApp.py:5465
msgid "[success] Grid Value deleted ..."
msgstr "[success] Valoarea Grila a fost stearsă."

#: FlatCAMApp.py:5468
msgid "[WARNING_NOTCL] Delete Grid value cancelled ..."
msgstr "[WARNING_NOTCL] Ștergerea unei valori de Grilă a fost anulată ..."

#: FlatCAMApp.py:5474
msgid "Key Shortcut List"
msgstr "Lista de shortcut-uri"

#: FlatCAMApp.py:5507
msgid "[WARNING_NOTCL] No object selected to copy it's name"
msgstr ""
"[WARNING_NOTCL] Nici-un obiect nu este selectat pentru i se copia valoarea"

#: FlatCAMApp.py:5511
msgid "Name copied on clipboard ..."
msgstr "Numele a fost copiat pe Clipboard ..."

#: FlatCAMApp.py:5553 flatcamEditors/FlatCAMGrbEditor.py:4012
msgid "[success] Coordinates copied to clipboard."
msgstr "[success] Coordonatele au fost copiate in clipboard."

#: FlatCAMApp.py:5809 FlatCAMApp.py:5812 FlatCAMApp.py:5815 FlatCAMApp.py:5818
#: FlatCAMApp.py:5833 FlatCAMApp.py:5836 FlatCAMApp.py:5839 FlatCAMApp.py:5842
#: FlatCAMApp.py:5882 FlatCAMApp.py:5885 FlatCAMApp.py:5888 FlatCAMApp.py:5891
#: ObjectCollection.py:719 ObjectCollection.py:722 ObjectCollection.py:725
#: ObjectCollection.py:728
#, python-brace-format
msgid "[selected]<span style=\"color:{color};\">{name}</span> selected"
msgstr "[selected]<span style=\"color:{color};\">{name}</span> selectat"

#: FlatCAMApp.py:6008
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""
"Exista fişiere/obiecte deschide in FlatCAM.\n"
"Crearea unui nou Proiect le va șterge..\n"
"Doriti să Salvati proiectul curentt?"

#: FlatCAMApp.py:6029
msgid "[success] New Project created..."
msgstr "[success] Un nou Proiect a fost creat..."

#: FlatCAMApp.py:6145 FlatCAMApp.py:6148 flatcamGUI/FlatCAMGUI.py:612
#: flatcamGUI/FlatCAMGUI.py:1851
msgid "Open Gerber"
msgstr "Încarcă Gerber"

#: FlatCAMApp.py:6153
msgid "[WARNING_NOTCL] Open Gerber cancelled."
msgstr "[WARNING_NOTCL] Incărcarea unui fişier Gerber este anulată."

#: FlatCAMApp.py:6174 FlatCAMApp.py:6177 flatcamGUI/FlatCAMGUI.py:613
#: flatcamGUI/FlatCAMGUI.py:1852
msgid "Open Excellon"
msgstr "Încarcă Excellon"

#: FlatCAMApp.py:6182
msgid "[WARNING_NOTCL] Open Excellon cancelled."
msgstr "[WARNING_NOTCL] Incărcarea unui fişier Excellon este anulată."

#: FlatCAMApp.py:6204 FlatCAMApp.py:6207
msgid "Open G-Code"
msgstr "Încarcă G-Code"

#: FlatCAMApp.py:6212
msgid "[WARNING_NOTCL] Open G-Code cancelled."
msgstr "[WARNING_NOTCL] Incărcarea unui fişier G-Code este anulată."

#: FlatCAMApp.py:6230 FlatCAMApp.py:6233
msgid "Open Project"
msgstr "Încarcă Project"

#: FlatCAMApp.py:6241
msgid "[WARNING_NOTCL] Open Project cancelled."
msgstr "[WARNING_NOTCL] Incărcarea unui Proiect a fost anulată."

#: FlatCAMApp.py:6260 FlatCAMApp.py:6263
msgid "Open Configuration File"
msgstr "Încarcă un fişier de Configurare"

#: FlatCAMApp.py:6267
msgid "[WARNING_NOTCL] Open Config cancelled."
msgstr "[WARNING_NOTCL] Incărcarea unui fişier de Configurare este anulată."

#: FlatCAMApp.py:6282 FlatCAMApp.py:6533 FlatCAMApp.py:8686 FlatCAMApp.py:8706
#: FlatCAMApp.py:8727 FlatCAMApp.py:8749
msgid "[WARNING_NOTCL] No object selected."
msgstr "[WARNING_NOTCL] Nici-un obiect selectat."

#: FlatCAMApp.py:6283 FlatCAMApp.py:6534
msgid "Please Select a Geometry object to export"
msgstr "Selectează un obiect Geometrie pentru export"

#: FlatCAMApp.py:6294
msgid "[ERROR_NOTCL] Only Geometry, Gerber and CNCJob objects can be used."
msgstr ""
"[ERROR_NOTCL] Doar obiectele Geometrie, Gerber și CNCJob pot fi folosite."

#: FlatCAMApp.py:6307 FlatCAMApp.py:6311
msgid "Export SVG"
msgstr "Exporta SVG"

#: FlatCAMApp.py:6316
msgid "[WARNING_NOTCL] Export SVG cancelled."
msgstr "[WARNING_NOTCL] Exportul SVG este anulat."

#: FlatCAMApp.py:6335
msgid "[[WARNING_NOTCL]] Data must be a 3D array with last dimension 3 or 4"
msgstr ""
"[[WARNING_NOTCL]] Datele trebuie să fie organizate intr-o arie 3D cu ultima "
"dimensiune cu valoarea 3 sau 4."

#: FlatCAMApp.py:6341 FlatCAMApp.py:6345
msgid "Export PNG Image"
msgstr "Exporta imagine PNG"

#: FlatCAMApp.py:6350
msgid "Export PNG cancelled."
msgstr "Exportul imagine PNG este anulat."

#: FlatCAMApp.py:6369
msgid ""
"[WARNING_NOTCL] No object selected. Please select an Gerber object to export."
msgstr ""
"[WARNING_NOTCL] Nici-un obiect selectat. Selectează un obiect Gerber pentru "
"export."

#: FlatCAMApp.py:6374 FlatCAMApp.py:6497
msgid ""
"[ERROR_NOTCL] Failed. Only Gerber objects can be saved as Gerber files..."
msgstr ""
"[ERROR_NOTCL] Eșuat. Doar obiectele tip Gerber pot fi salvate ca fişiere "
"Gerber..."

#: FlatCAMApp.py:6386
msgid "Save Gerber source file"
msgstr "Salvează codul sursa Gerber ca fişier"

#: FlatCAMApp.py:6391
msgid "[WARNING_NOTCL] Save Gerber source file cancelled."
msgstr "[WARNING_NOTCL] Salvarea codului sursa Gerber este anulată."

#: FlatCAMApp.py:6410
msgid ""
"[WARNING_NOTCL] No object selected. Please select an Excellon object to "
"export."
msgstr ""
"[WARNING_NOTCL] Nici-un obiect selectat. Selectează un obiect Excellon "
"pentru export."

#: FlatCAMApp.py:6415 FlatCAMApp.py:6456
msgid ""
"[ERROR_NOTCL] Failed. Only Excellon objects can be saved as Excellon files..."
msgstr ""
"[ERROR_NOTCL] Eșuat. Doar obiectele tip Excellon pot fi salvate ca fişiere "
"Excellon ..."

#: FlatCAMApp.py:6423 FlatCAMApp.py:6427
msgid "Save Excellon source file"
msgstr "Salvează codul sursa Excellon ca fişier"

#: FlatCAMApp.py:6432
msgid "[WARNING_NOTCL] Saving Excellon source file cancelled."
msgstr "[WARNING_NOTCL] Salvarea codului sursa Excellon este anulată."

#: FlatCAMApp.py:6451
msgid ""
"[WARNING_NOTCL] No object selected. Please Select an Excellon object to "
"export."
msgstr ""
"[WARNING_NOTCL] Nici-un obiect selectat. Selectează un obiect Excellon "
"pentru export."

#: FlatCAMApp.py:6464 FlatCAMApp.py:6468
msgid "Export Excellon"
msgstr "Exporta Excellon"

#: FlatCAMApp.py:6473
msgid "[WARNING_NOTCL] Export Excellon cancelled."
msgstr "[WARNING_NOTCL] Exportul Excellon anulat."

#: FlatCAMApp.py:6492
msgid ""
"[WARNING_NOTCL] No object selected. Please Select an Gerber object to export."
msgstr ""
"[WARNING_NOTCL] Nici-un obiect selectat. Selectează un obiect Gerber pentru "
"export."

#: FlatCAMApp.py:6505 FlatCAMApp.py:6509
msgid "Export Gerber"
msgstr "Exporta Gerber"

#: FlatCAMApp.py:6514
msgid "[WARNING_NOTCL] Export Gerber cancelled."
msgstr "[WARNING_NOTCL] Exportul Gerber este anulat."

#: FlatCAMApp.py:6544
msgid "[ERROR_NOTCL] Only Geometry objects can be used."
msgstr "[ERROR_NOTCL] Doar obiecte tip Geometrie pot fi folosite."

#: FlatCAMApp.py:6558 FlatCAMApp.py:6562
msgid "Export DXF"
msgstr "Exporta DXF"

#: FlatCAMApp.py:6568
msgid "[WARNING_NOTCL] Export DXF cancelled."
msgstr "[WARNING_NOTCL] Exportul DXF anulat."

#: FlatCAMApp.py:6588 FlatCAMApp.py:6591
msgid "Import SVG"
msgstr "Importa SVG"

#: FlatCAMApp.py:6600
msgid "[WARNING_NOTCL] Open SVG cancelled."
msgstr "[WARNING_NOTCL] Importul SVG anulat."

#: FlatCAMApp.py:6619 FlatCAMApp.py:6623
msgid "Import DXF"
msgstr "Importa DXF"

#: FlatCAMApp.py:6632
msgid "[WARNING_NOTCL] Open DXF cancelled."
msgstr "[WARNING_NOTCL] Incărcarea fişier DXF anulată."

#: FlatCAMApp.py:6650
#, python-format
msgid "%s"
msgstr "%s"

#: FlatCAMApp.py:6670
msgid ""
"[WARNING_NOTCL] Select an Gerber or Excellon file to view it's source file."
msgstr ""
"[WARNING_NOTCL] Selectati un obiect Gerber sau Excellon pentru a-i vedea "
"codul sursa."

#: FlatCAMApp.py:6677
msgid ""
"[WARNING_NOTCL] There is no selected object for which to see it's source "
"file code."
msgstr "[WARNING_NOTCL] Nici-un obiect selectat pentru a-i vedea codul sursa."

#: FlatCAMApp.py:6685
msgid "Source Editor"
msgstr "Editor Cod"

#: FlatCAMApp.py:6695
#, python-format
msgid "[ERROR]App.on_view_source() -->%s"
msgstr "[ERROR]App.on_view_source() -->%s"

#: FlatCAMApp.py:6707 FlatCAMApp.py:7849 FlatCAMObj.py:5599
#: flatcamTools/ToolSolderPaste.py:1284
msgid "Code Editor"
msgstr "Editor Cod"

#: FlatCAMApp.py:6719
msgid "Script Editor"
msgstr "Editor Script."

#: FlatCAMApp.py:6722
msgid ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, Cncjob,\n"
"# Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, GeoCutout, "
"GeoUnion, GetNames, GetSys,\n"
"# ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillHoles, Mirror, New,\n"
"# NewGeometry, Offset, OpenExcellon, OpenGCode, OpenGerber, OpenProject, "
"Options, Paint, Panelize,\n"
"# Plot, SaveProject, SaveSys, Scale, SetActive, SetSys, Skew, SubtractPoly,"
"SubtractRectangle, Version,\n"
"# WriteGCode\n"
"#\n"
"\n"
msgstr ""
"#\n"
"# CREAZA UN NOU SCRIPT TCL FLATCAM\n"
"# Tutorial TCL aici: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# Lista de comenzi FlatCAM:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, Cncjob,\n"
"# Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, GeoCutout, "
"GeoUnion, GetNames, GetSys,\n"
"# ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillHoles, Mirror, New,\n"
"# NewGeometry, Offset, OpenExcellon, OpenGCode, OpenGerber, OpenProject, "
"Options, Paint, Panelize,\n"
"# Plot, SaveProject, SaveSys, Scale, SetActive, SetSys, Skew, SubtractPoly,"
"SubtractRectangle, Version,\n"
"# WriteGCode\n"
"#\n"
"\n"

#: FlatCAMApp.py:6745 FlatCAMApp.py:6748
msgid "Open TCL script"
msgstr "Încarcă TCL script"

#: FlatCAMApp.py:6756
msgid "[WARNING_NOTCL] Open TCL script cancelled."
msgstr "[WARNING_NOTCL] Incărcarea TCL script anulată."

#: FlatCAMApp.py:6768
#, python-format
msgid "[ERROR]App.on_fileopenscript() -->%s"
msgstr "[ERROR]App.on_fileopenscript() -->%s"

#: FlatCAMApp.py:6794 FlatCAMApp.py:6797
msgid "Run TCL script"
msgstr "Ruleaza TCL script"

#: FlatCAMApp.py:6805
msgid "[WARNING_NOTCL] Run TCL script cancelled."
msgstr "[WARNING_NOTCL] Rularea fisierului Script a fost anulată."

#: FlatCAMApp.py:6855 FlatCAMApp.py:6859
msgid "Save Project As ..."
msgstr "Salvează Proiectul ca ..."

#: FlatCAMApp.py:6856
#, python-brace-format
msgid "{l_save}/Project_{date}"
msgstr "{l_save}/Proiect_{date}"

#: FlatCAMApp.py:6864
msgid "[WARNING_NOTCL] Save Project cancelled."
msgstr "[WARNING_NOTCL] Salvarea Proiect anulată."

#: FlatCAMApp.py:6908
msgid "Exporting SVG"
msgstr "SVG in curs de export"

#: FlatCAMApp.py:6942 FlatCAMApp.py:7048 FlatCAMApp.py:7163
#, python-format
msgid "[success] SVG file exported to %s"
msgstr "[success] Fişier SVG exportat in %s"

#: FlatCAMApp.py:6973 FlatCAMApp.py:7094
#, python-format
msgid "[WARNING_NOTCL] No object Box. Using instead %s"
msgstr ""
"[WARNING_NOTCL] Nu este nici-un container Box pentru obiect. Se foloseşte %s"

#: FlatCAMApp.py:7051 FlatCAMApp.py:7166
msgid "Generating Film ... Please wait."
msgstr "Filmul se generează ... Aşteaptă!"

#: FlatCAMApp.py:7314
#, python-format
msgid "[success] Excellon file exported to %s"
msgstr "[success] Fişierul Excellon exportat in %s"

#: FlatCAMApp.py:7321
msgid "Exporting Excellon"
msgstr "Excellon in curs de export"

#: FlatCAMApp.py:7326 FlatCAMApp.py:7333
msgid "[ERROR_NOTCL] Could not export Excellon file."
msgstr "[ERROR_NOTCL] Fişierul Excellon nu a putut fi exportat."

#: FlatCAMApp.py:7431
#, python-format
msgid "[success] Gerber file exported to %s"
msgstr "[success] Fişier Gerber exportat in %s"

#: FlatCAMApp.py:7438
msgid "Exporting Gerber"
msgstr "Gerber in curs de export"

#: FlatCAMApp.py:7443 FlatCAMApp.py:7450
msgid "[ERROR_NOTCL] Could not export Gerber file."
msgstr "[ERROR_NOTCL] Fişierul Gerber nu a putut fi exportat."

#: FlatCAMApp.py:7490
#, python-format
msgid "[success] DXF file exported to %s"
msgstr "[success] Fişierul DXF exportat in %s"

#: FlatCAMApp.py:7496
msgid "Exporting DXF"
msgstr "DXF in curs de export"

#: FlatCAMApp.py:7501 FlatCAMApp.py:7508
msgid "[[WARNING_NOTCL]] Could not export DXF file."
msgstr "[[WARNING_NOTCL]] Fişierul DXF nu a putut fi exportat."

#: FlatCAMApp.py:7528 FlatCAMApp.py:7570 FlatCAMApp.py:7614
msgid ""
"[ERROR_NOTCL] Not supported type is picked as parameter. Only Geometry and "
"Gerber are supported"
msgstr ""
"[ERROR_NOTCL] Typul parametrului nu este compatibil. Doar Geometrie is "
"Gerber sunt acceptate."

#: FlatCAMApp.py:7538
msgid "Importing SVG"
msgstr "SVG in curs de ia fi importat"

#: FlatCAMApp.py:7549 FlatCAMApp.py:7591 FlatCAMApp.py:7634 FlatCAMApp.py:7711
#: FlatCAMApp.py:7772 FlatCAMApp.py:7835 flatcamTools/ToolPDF.py:212
#, python-format
msgid "[success] Opened: %s"
msgstr "[success] Incărcat: %s"

#: FlatCAMApp.py:7580
msgid "Importing DXF"
msgstr "DXF in curs de a fi importat"

#: FlatCAMApp.py:7622
msgid "Importing Image"
msgstr "Imaginea in curs de a fi importata"

#: FlatCAMApp.py:7663 FlatCAMApp.py:7665
#, python-format
msgid "[ERROR_NOTCL] Failed to open file: %s"
msgstr "[ERROR_NOTCL] Eşec in incărcarea fişierului %s"

#: FlatCAMApp.py:7668
#, python-brace-format
msgid "[ERROR_NOTCL] Failed to parse file: {name}. {error}"
msgstr "[ERROR_NOTCL] Eşec in parsarea fişierului: {name}. {error}"

#: FlatCAMApp.py:7675 FlatCAMObj.py:4288
#: flatcamEditors/FlatCAMExcEditor.py:2078
msgid "[ERROR] An internal error has ocurred. See shell.\n"
msgstr ""
"[ERROR]  A apărut o eroare interna. Verifică in TCL Shell pt mai multe "
"detalii.\n"

#: FlatCAMApp.py:7684
msgid ""
"[ERROR_NOTCL] Object is not Gerber file or empty. Aborting object creation."
msgstr ""
"[ERROR_NOTCL] Obiectul nu estetip Gerber sau este gol. Se anulează crearea "
"obiectului."

#: FlatCAMApp.py:7692
msgid "Opening Gerber"
msgstr "Gerber in curs de incărcare"

#: FlatCAMApp.py:7702
msgid "[ERROR_NOTCL] Open Gerber failed. Probable not a Gerber file."
msgstr ""
"[ERROR_NOTCL] Incărcarea Gerber a eșuat. Probabil nu este de tip Gerber."

#: FlatCAMApp.py:7735 flatcamTools/ToolPcbWizard.py:418
msgid "[ERROR_NOTCL] This is not Excellon file."
msgstr "[ERROR_NOTCL] Acesta nu este un fişier Excellon."

#: FlatCAMApp.py:7738
#, python-format
msgid "[ERROR_NOTCL] Cannot open file: %s"
msgstr "[ERROR_NOTCL] Fişierul %s nu se poate incărca."

#: FlatCAMApp.py:7743 flatcamTools/ToolPcbWizard.py:427
msgid "[ERROR_NOTCL] An internal error has occurred. See shell.\n"
msgstr ""
"[ERROR_NOTCL]  A apărut o eroare interna. Verifică in TCL Shell pt mai multe "
"detalii.\n"

#: FlatCAMApp.py:7756 flatcamTools/ToolPDF.py:262
#: flatcamTools/ToolPcbWizard.py:440
#, python-format
msgid "[ERROR_NOTCL] No geometry found in file: %s"
msgstr ""
"[ERROR_NOTCL] Nici-o informaţie de tip geometrie nu s-a gasit in fişierul: %s"

#: FlatCAMApp.py:7759
msgid "Opening Excellon."
msgstr "Excellon in curs de incărcare"

#: FlatCAMApp.py:7765
msgid "[ERROR_NOTCL] Open Excellon file failed. Probable not an Excellon file."
msgstr ""
"[ERROR_NOTCL] Incărcarea Excellon a eșuat. Probabil nu este de tip Excellon."

#: FlatCAMApp.py:7802
#, python-format
msgid "[ERROR_NOTCL] Failed to open %s"
msgstr "[ERROR_NOTCL] Incărcarea fişierului %s a eșuat."

#: FlatCAMApp.py:7812
msgid "[ERROR_NOTCL] This is not GCODE"
msgstr "[ERROR_NOTCL] Acest obiect nu este de tip GCode"

#: FlatCAMApp.py:7818
msgid "Opening G-Code."
msgstr "G-Code in curs de incărcare"

#: FlatCAMApp.py:7826
msgid ""
"[ERROR_NOTCL] Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"
msgstr ""
"[ERROR_NOTCL] Eşec in crearea unui obiect CNCJob. Probabil nu este un fişier "
"GCode.\n"
"Incercarea de a crea un obiect CNCJob din  G-Code a eșuat in timpul "
"procesarii."

#: FlatCAMApp.py:7866
#, python-format
msgid "[ERROR_NOTCL] Failed to open config file: %s"
msgstr "[ERROR_NOTCL] Eşec in incărcarea fişierului de configurare: %s"

#: FlatCAMApp.py:7892 FlatCAMApp.py:7909
#, python-format
msgid "[ERROR_NOTCL] Failed to open project file: %s"
msgstr "[ERROR_NOTCL] Eşec in incărcarea fişierului proiect: %s"

#: FlatCAMApp.py:7932
#, python-format
msgid "[success] Project loaded from: %s"
msgstr "[success] Proeictul a fost incărcat din: %s"

#: FlatCAMApp.py:8037
msgid "Available commands:\n"
msgstr "Comenzi disponibile:\n"

#: FlatCAMApp.py:8039
msgid ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"
msgstr ""
"\n"
"\n"
"Introduceți help <nume_comanda> pentru utilizare.\n"
"Exemplu: help open_gerber"

#: FlatCAMApp.py:8189
msgid "Shows list of commands."
msgstr "Arata o lista de comenzi."

#: FlatCAMApp.py:8246
msgid "[ERROR_NOTCL] Failed to load recent item list."
msgstr "[ERROR_NOTCL] Eşec in incărcarea listei cu obiecte recente."

#: FlatCAMApp.py:8253
msgid "[ERROR_NOTCL] Failed to parse recent item list."
msgstr "[ERROR_NOTCL] Eşec in parsarea listei cu obiecte recente."

#: FlatCAMApp.py:8297
msgid "Clear Recent files"
msgstr "Sterge fişierele recente"

#: FlatCAMApp.py:8314 flatcamGUI/FlatCAMGUI.py:975
msgid "<b>Shortcut Key List</b>"
msgstr "<b>Lista cu taste Shortcut</b>"

#: FlatCAMApp.py:8321
msgid ""
"\n"
"<p><span style=\"font-size:14px\"><strong>Selected Tab - Choose an Item from "
"Project Tab</strong></span></p>\n"
"\n"
"<p><span style=\"font-size:10px\"><strong>Details</strong>:<br />\n"
"The normal flow when working in FlatCAM is the following:</span></p>\n"
"\n"
"<ol>\n"
"\t<li><span style=\"font-size:10px\">Loat/Import a Gerber, Excellon, Gcode, "
"DXF, Raster Image or SVG file into FlatCAM using either the menu&#39;s, "
"toolbars, key shortcuts or even dragging and dropping the files on the GUI."
"<br />\n"
"\t<br />\n"
"\tYou can also load a <strong>FlatCAM project</strong> by double clicking on "
"the project file, drag &amp; drop of the file into the FLATCAM GUI or "
"through the menu/toolbar links offered within the app.</span><br />\n"
"\t&nbsp;</li>\n"
"\t<li><span style=\"font-size:10px\">Once an object is available in the "
"Project Tab, by selecting it and then focusing on <strong>SELECTED TAB </"
"strong>(more simpler is to double click the object name in the Project Tab), "
"<strong>SELECTED TAB </strong>will be updated with the object properties "
"according to it&#39;s kind: Gerber, Excellon, Geometry or CNCJob object.<br /"
">\n"
"\t<br />\n"
"\tIf the selection of the object is done on the canvas by single click "
"instead, and the <strong>SELECTED TAB</strong> is in focus, again the object "
"properties will be displayed into the Selected Tab. Alternatively, double "
"clicking on the object on the canvas will bring the <strong>SELECTED TAB</"
"strong> and populate it even if it was out of focus.<br />\n"
"\t<br />\n"
"\tYou can change the parameters in this screen and the flow direction is "
"like this:<br />\n"
"\t<br />\n"
"\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; Generate "
"Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools (change "
"param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob Object </"
"strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/prepend to "
"GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-&gt; Save GCode</"
"span></li>\n"
"</ol>\n"
"\n"
"<p><span style=\"font-size:10px\">A list of key shortcuts is available "
"through an menu entry in <strong>Help -&gt; Shortcuts List</strong>&nbsp;or "
"through it&#39;s own key shortcut: <strng>F3</strong>.</span></p>\n"
"\n"
"        "
msgstr ""
"\n"
"<p><span style=\"font-size:14px\"><strong>Tab Selectat - Alege o intrare din "
"Tab-ul Proiect</strong></span></p>\n"
"\n"
"<p><span style=\"font-size:10px\"><strong>Detalii</strong>:<br />\n"
"Fluxul normal când se lucrează in FlatCAM este următorul:</span></p>\n"
"\n"
"<ol>\n"
"\t<li><span style=\"font-size:10px\">Încarcă/Importa un fişier Gerber, "
"Excellon, Gcode, DXF, Imagine Raster sau SVG in FlatCAM folosind ori "
"meniurile, toolbarurile, tastele shortcut sau chiar tragerea și eliberarea "
"fişierelor in fereastra FlatCAM.<br />\n"
"\t<br />\n"
"\tPoti să incarci și un <strong>proiect FlatCAM</strong> prin dublu click pe "
"fişierul proiect, tragerea și eliberarea fişierului peste FLATCAM GUI sau "
"prin sistemul de meniuri/toolbaruri oferit in cadrul aplicaţiei.</span><br /"
">\n"
"\t&nbsp;</li>\n"
"\t<li><span style=\"font-size:10px\">Odata ce un obiect este disponibil in "
"Tab-ul Proiect, prin selectarea și focalizarea in <strong>Tab-ul SELECTAT</"
"strong>(mai simplu prin dublu click pe numele obiectului in lista dinTab-ul "
"Proiect), <strong>Tab-ul SELECTAT </strong>va fi updatat conform cu tipul "
"sau: Gerber, Excellon, Geometrie sau CNCJob.<br />\n"
"\t<br />\n"
"\tDaca selectia este efectuata pe Canvas prin simplu click și <strong>Tab-ul "
"SELECTAT</strong> este in focus, din nou, proprietatile obiectului vor fi "
"afisate in Tab-ul SELECTAT. Alternativ, prin dublu click pe obiect in Canvas "
"se va aduce <strong>Tab-ul SELECTAT</strong> in focus și va fi actualizat cu "
"informaţie chair daca initial nu era focalizat.<br />\n"
"\t<br />\n"
"\tO suma de parametri se pot schimba in acest Tab and directia in lucru este "
"urmatoarea:<br />\n"
"\t<br />\n"
"\t<strong>Obiectul Gerber/Excellon</strong> -&gt; Schimba Parametru -&gt; "
"Generează Geometrie -&gt;<strong>Obiectul Geometrie </strong>-&gt; Adaugă "
"unelte (prin schimbare parametru in Tab-ul SELECTAT) -&gt; Generează CNCJob -"
"&gt;<strong> Obiect CNCJob</strong>-&gt; Verifică GCode (folosind Editare "
"cod CNC) și/sau Adaugă cod GCode la inceput/la sfârşit (din nou, efectuat in "
"<strong>Tab-ul SELECTAT)&nbsp;</strong>-&gt; Salvează GCode</span></li>\n"
"</ol>\n"
"\n"
"<p><span style=\"font-size:10px\">O lista cu tastele shortcut este "
"disponibila ca și meniu  in <strong>Help -&gt;Lista Shortcut-uri</"
"strong>&nbsp;sau prin propria tasta shortcutt: <strng>F3</strong>.</span></"
"p>\n"
"\n"
"        "

#: FlatCAMApp.py:8428
msgid "[WARNING_NOTCL] Failed checking for latest version. Could not connect."
msgstr ""
"[WARNING_NOTCL] Verificarea pentru ultima versiune a eșuat. Nu a fost "
"posibilă conectarea la server."

#: FlatCAMApp.py:8435
msgid "[ERROR_NOTCL] Could not parse information about latest version."
msgstr ""
"[ERROR_NOTCL] Informatia cu privire la ultima versiune nu s-a putut "
"interpreta."

#: FlatCAMApp.py:8445
msgid "[success] FlatCAM is up to date!"
msgstr "[success] FlatCAM este la ultima versiune!"

#: FlatCAMApp.py:8450
msgid "Newer Version Available"
msgstr "O nouă versiune este disponibila"

#: FlatCAMApp.py:8451
msgid ""
"There is a newer version of FlatCAM available for download:\n"
"\n"
msgstr ""
"O nouă versiune de FlatCAM este disponibilă pentru download::\n"
"\n"

#: FlatCAMApp.py:8453
msgid "info"
msgstr "Informaţie"

#: FlatCAMApp.py:8472
msgid "[success] All plots disabled."
msgstr "[success] Toate afişările sunt dezactivate."

#: FlatCAMApp.py:8478
msgid "[success] All non selected plots disabled."
msgstr "[success] Toate afişările care nu sunt selectate sunt dezactivate."

#: FlatCAMApp.py:8484
msgid "[success] All plots enabled."
msgstr "[success] Toate afişările sunt activate."

#: FlatCAMApp.py:8490
msgid "[success] Selected plots enabled..."
msgstr "[success] Toate afişările sunt activate..."

#: FlatCAMApp.py:8498
msgid "[success] Selected plots disabled..."
msgstr "[success] Toate afişările sunt dezactivate..."

#: FlatCAMApp.py:8508 FlatCAMApp.py:8521
msgid "Working ..."
msgstr "Se lucrează..."

#: FlatCAMApp.py:8555
msgid "Saving FlatCAM Project"
msgstr "Proiectul FlatCAM este in curs de salvare"

#: FlatCAMApp.py:8576 FlatCAMApp.py:8607
#, python-format
msgid "[success] Project saved to: %s"
msgstr "[success] Proiectul s-a salvat in: %s"

#: FlatCAMApp.py:8594
#, python-format
msgid "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."
msgstr ""
"[ERROR_NOTCL] Verificarea proiectului salvat a eșuat: %s. Incearcă să il "
"salvezi din nou."

#: FlatCAMApp.py:8601
#, python-format
msgid "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."
msgstr ""
"[ERROR_NOTCL] Parsarea proiectului salvat a eșuat: %s. Incearcă să il "
"salvezi din nou."

#: FlatCAMApp.py:8609
#, python-format
msgid "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."
msgstr ""
"[ERROR_NOTCL] Salvarea proiectului a eșuat: %s. Incearcă să il salvezi din "
"nou."

#: FlatCAMObj.py:207
#, python-brace-format
msgid "[success] Name changed from {old} to {new}"
msgstr "[success] Numele schimbat din {old} in {new}"

#: FlatCAMObj.py:553 FlatCAMObj.py:2040 FlatCAMObj.py:3307 FlatCAMObj.py:5496
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr "<span style=\"color:green;\"><b>Baza</b></span>"

#: FlatCAMObj.py:565 FlatCAMObj.py:2056 FlatCAMObj.py:3329 FlatCAMObj.py:5502
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr "<span style=\"color:red;\"><b>Avansat</b></span>"

#: FlatCAMObj.py:927 FlatCAMObj.py:983
#, python-format
msgid "[success] Isolation geometry created: %s"
msgstr "[success] Geometria de izolare creată: %s"

#: FlatCAMObj.py:1162
msgid "Plotting Apertures"
msgstr "Aperturile sunt in curs de afișare"

#: FlatCAMObj.py:1883 flatcamEditors/FlatCAMExcEditor.py:1369
msgid "Total Drills"
msgstr "Nr. Tot. Op. Găurire"

#: FlatCAMObj.py:1909 flatcamEditors/FlatCAMExcEditor.py:1401
msgid "Total Slots"
msgstr "Nr. Tot. Sloturi"

#: FlatCAMObj.py:2112 FlatCAMObj.py:3381 FlatCAMObj.py:3706 FlatCAMObj.py:3894
#: FlatCAMObj.py:3907 FlatCAMObj.py:4021 FlatCAMObj.py:4437 FlatCAMObj.py:4673
#: FlatCAMObj.py:5077 flatcamEditors/FlatCAMExcEditor.py:1475
#: flatcamTools/ToolCalculators.py:304 flatcamTools/ToolCalculators.py:315
#: flatcamTools/ToolCalculators.py:327 flatcamTools/ToolCalculators.py:342
#: flatcamTools/ToolCalculators.py:355 flatcamTools/ToolCalculators.py:369
#: flatcamTools/ToolCalculators.py:380 flatcamTools/ToolCalculators.py:391
#: flatcamTools/ToolCalculators.py:402 flatcamTools/ToolFilm.py:241
#: flatcamTools/ToolFilm.py:248 flatcamTools/ToolNonCopperClear.py:481
#: flatcamTools/ToolNonCopperClear.py:553
#: flatcamTools/ToolNonCopperClear.py:630
#: flatcamTools/ToolNonCopperClear.py:647 flatcamTools/ToolPaint.py:537
#: flatcamTools/ToolPaint.py:609 flatcamTools/ToolPaint.py:746
#: flatcamTools/ToolPaint.py:846 flatcamTools/ToolPaint.py:1000
#: flatcamTools/ToolPanelize.py:385 flatcamTools/ToolPanelize.py:397
#: flatcamTools/ToolPanelize.py:410 flatcamTools/ToolPanelize.py:423
#: flatcamTools/ToolPanelize.py:435 flatcamTools/ToolPanelize.py:446
#: flatcamTools/ToolSolderPaste.py:758 flatcamTools/ToolSolderPaste.py:830
msgid "[ERROR_NOTCL] Wrong value format entered, use a number."
msgstr "[ERROR_NOTCL] O valoare gresita a fost introdusa. Foloseşte un număr."

#: FlatCAMObj.py:2336 FlatCAMObj.py:2428 FlatCAMObj.py:2551
msgid ""
"[ERROR_NOTCL] Please select one or more tools from the list and try again."
msgstr ""
"[ERROR_NOTCL] Selectează una sau mai multe unelte din lista și încearcă din "
"nou."

#: FlatCAMObj.py:2343
msgid ""
"[ERROR_NOTCL] Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr ""
"[ERROR_NOTCL] Anulat. Freza pt frezarea găurilor este mai mare decat "
"diametrul găurii."

#: FlatCAMObj.py:2357 FlatCAMObj.py:2452 FlatCAMObj.py:2571
msgid "Tool_nr"
msgstr "Nr. Unealtă"

#: FlatCAMObj.py:2357 FlatCAMObj.py:2452 FlatCAMObj.py:2571
#: flatcamEditors/FlatCAMExcEditor.py:820
#: flatcamEditors/FlatCAMExcEditor.py:2021 flatcamGUI/ObjectUI.py:553
#: flatcamTools/ToolNonCopperClear.py:83 flatcamTools/ToolPaint.py:80
#: flatcamTools/ToolPcbWizard.py:76 flatcamTools/ToolSolderPaste.py:81
msgid "Diameter"
msgstr "Diametru"

#: FlatCAMObj.py:2357 FlatCAMObj.py:2452 FlatCAMObj.py:2571
msgid "Drills_Nr"
msgstr "Nr. gaura"

#: FlatCAMObj.py:2357 FlatCAMObj.py:2452 FlatCAMObj.py:2571
msgid "Slots_Nr"
msgstr "Nr. slot"

#: FlatCAMObj.py:2438
msgid ""
"[ERROR_NOTCL] Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr ""
"[ERROR_NOTCL] Anulat. Freza este mai mare decat diametrul slotului de frezat."

#: FlatCAMObj.py:2613 FlatCAMObj.py:4326 FlatCAMObj.py:4541 FlatCAMObj.py:4852
msgid ""
"[ERROR_NOTCL] Wrong value format for self.defaults[\"z_pdepth\"] or self."
"options[\"z_pdepth\"]"
msgstr ""
"[ERROR_NOTCL] Valoare gresita pt self.defaults[\"z_pdepth\"] sau self."
"options[\"z_pdepth\"]"

#: FlatCAMObj.py:2625 FlatCAMObj.py:4338 FlatCAMObj.py:4553 FlatCAMObj.py:4864
msgid ""
"[ERROR_NOTCL] Wrong value format for self.defaults[\"feedrate_probe\"] or "
"self.options[\"feedrate_probe\"]"
msgstr ""
"[ERROR_NOTCL] Valoare gresita pt self.defaults[\"feedrate_probe\"] sau self."
"options[\"feedrate_probe\"]"

#: FlatCAMObj.py:2657 FlatCAMObj.py:4740 FlatCAMObj.py:4745 FlatCAMObj.py:4895
msgid "Generating CNC Code"
msgstr "CNC Code in curs de generare"

#: FlatCAMObj.py:2683 FlatCAMObj.py:5037 camlib.py:5167 camlib.py:5626
#: camlib.py:5889
msgid ""
"[ERROR]The Toolchange X,Y field in Edit -> Preferences has to be in the "
"format (x, y) \n"
"but now there is only one value, not two. "
msgstr ""
"[ERROR] Parametrul >Schimbare Unealtă X, Y< in Editare -> Peferințe trebuie "
"să fie in formatul (x, y) \n"
"dar are o singură valoare in loc de doua. "

#: FlatCAMObj.py:3004 FlatCAMObj.py:3949 FlatCAMObj.py:3950 FlatCAMObj.py:3959
msgid "Iso"
msgstr "Izo."

#: FlatCAMObj.py:3004 FlatCAMObj.py:3264 FlatCAMObj.py:3571
msgid "Rough"
msgstr "Grosier"

#: FlatCAMObj.py:3004
msgid "Finish"
msgstr "Finisare"

#: FlatCAMObj.py:3300 flatcamGUI/FlatCAMGUI.py:530 flatcamGUI/FlatCAMGUI.py:729
#: flatcamGUI/FlatCAMGUI.py:1634 flatcamGUI/FlatCAMGUI.py:1972
#: flatcamGUI/ObjectUI.py:997
msgid "Copy"
msgstr "Copiază"

#: FlatCAMObj.py:3541
msgid "[ERROR_NOTCL] Please enter the desired tool diameter in Float format."
msgstr "[ERROR_NOTCL] Introdu diametrul dorit pt unealtă in format Real."

#: FlatCAMObj.py:3616
msgid "[success] Tool added in Tool Table."
msgstr "[success] Unealtă adăugată in Tabela de Unelte."

#: FlatCAMObj.py:3621
msgid "[ERROR_NOTCL] Default Tool added. Wrong value format entered."
msgstr ""
"[ERROR_NOTCL] Unealta implicita adăugată dar valoarea are un format gresit."

#: FlatCAMObj.py:3651 FlatCAMObj.py:3661
msgid "[WARNING_NOTCL] Failed. Select a tool to copy."
msgstr "[WARNING_NOTCL] Eșuat. Selectează o unealtă pt copiere."

#: FlatCAMObj.py:3690
msgid "[success] Tool was copied in Tool Table."
msgstr "[success] Unealta a fost copiata in Tabela de Unelte."

#: FlatCAMObj.py:3723
msgid "[success] Tool was edited in Tool Table."
msgstr "[success] Unealta a fost editata in Tabela de Unelte."

#: FlatCAMObj.py:3753 FlatCAMObj.py:3761
msgid "[WARNING_NOTCL] Failed. Select a tool to delete."
msgstr "[WARNING_NOTCL] Eșuat. Selectează o unealtă pentru ștergere."

#: FlatCAMObj.py:3783
msgid "[success] Tool was deleted in Tool Table."
msgstr "[success] Unealta a fost stearsa din Tabela de Unelte."

#: FlatCAMObj.py:4207
#, python-format
msgid ""
"[WARNING_NOTCL] This Geometry can't be processed because it is %s geometry."
msgstr ""
"[WARNING_NOTCL] Acest obiect Geometrie nu poate fi procesar decoarece este "
"Geometrie %s."

#: FlatCAMObj.py:4224
msgid "[ERROR_NOTCL] Wrong Tool Dia value format entered, use a number."
msgstr ""
"[ERROR_NOTCL] Diametrul uneltei este in format gresit, foloseşte un număr "
"Real."

#: FlatCAMObj.py:4251
msgid "[ERROR_NOTCL] Failed. No tool selected in the tool table ..."
msgstr ""
"[ERROR_NOTCL] Eșuat. Nici-o unealtă nu este selectată in Tabela de Unelte ..."

#: FlatCAMObj.py:4289
#, python-format
msgid "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() --> %s"
msgstr "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() --> %s"

#: FlatCAMObj.py:4446 FlatCAMObj.py:4680
msgid ""
"[WARNING] Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""
"[WARNING] Un ofset pt unealtă este selectat in Tabela de Unelte dar nici-o "
"val. nu este oferita.\n"
"Adaugă un ofset pt unealtă sau schimbă Tipul Ofset."

#: FlatCAMObj.py:4565 flatcamTools/ToolSolderPaste.py:1112
#: flatcamTools/ToolSolderPaste.py:1168
msgid "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."
msgstr "[ERROR_NOTCL] Anulat. Fişier gol, nu are date geometrice."

#: FlatCAMObj.py:4928 FlatCAMObj.py:4937 camlib.py:3348 camlib.py:3357
msgid "[ERROR_NOTCL] Scale factor has to be a number: integer or float."
msgstr ""
"[ERROR_NOTCL] Factorul de scalare trebuie să fie un număr: natural sau real."

#: FlatCAMObj.py:4974
msgid "[success] Geometry Scale done."
msgstr "[success] Scalare Geometrie executată."

#: FlatCAMObj.py:4991 camlib.py:3426
msgid ""
"[ERROR_NOTCL] An (x,y) pair of values are needed. Probable you entered only "
"one value in the Offset field."
msgstr ""
"[ERROR_NOTCL] O pereche de valori (x,y) este necesară. Probabil că ai "
"introdus numai o singură valoare in câmpul Offset."

#: FlatCAMObj.py:5010
msgid "[success] Geometry Offset done."
msgstr "[success] Ofset Geometrie executat."

#: FlatCAMObj.py:5564 FlatCAMObj.py:5569 flatcamTools/ToolSolderPaste.py:1368
msgid "Export Machine Code ..."
msgstr "Exporta CNC Cod Masina ..."

#: FlatCAMObj.py:5575 flatcamTools/ToolSolderPaste.py:1371
msgid "[WARNING_NOTCL] Export Machine Code cancelled ..."
msgstr "[WARNING_NOTCL] Exportul codului masina CNC a fost anulat ..."

#: FlatCAMObj.py:5588
#, python-format
msgid "[success] Machine Code file saved to: %s"
msgstr "[success] Fişierul cu cod CNC este salvat in: %s"

#: FlatCAMObj.py:5610
#, python-format
msgid "[ERROR]FlatCAMCNNJob.on_edit_code_click() -->%s"
msgstr "[ERROR]FlatCAMCNNJob.on_edit_code_click() -->%s"

#: FlatCAMObj.py:5727
#, python-format
msgid ""
"[WARNING_NOTCL] This CNCJob object can't be processed because it is a %s "
"CNCJob object."
msgstr ""
"[WARNING_NOTCL] Acest obiect CNCJob nu poate fi procesar deoarece este un "
"obiect CNCJob tip %s."

#: FlatCAMObj.py:5780
msgid "[ERROR_NOTCL] G-code does not have a units code: either G20 or G21"
msgstr "[ERROR_NOTCL] G-code nu contine codul pt unitati: G20 sau G21"

#: FlatCAMObj.py:5793
msgid ""
"[ERROR_NOTCL] Cancelled. The Toolchange Custom code is enabled but it's "
"empty."
msgstr ""
"[ERROR_NOTCL] Anulat. Codul G-Code din Macro-ul Schimbare unealtă este "
"activat dar nuc contine nimic."

#: FlatCAMObj.py:5800
msgid "[success] Toolchange G-code was replaced by a custom code."
msgstr ""
"[success] G-Code-ul pt schimbare unealtă a fost inlocuit cu un cod "
"pesonalizat."

#: FlatCAMObj.py:5815 flatcamTools/ToolSolderPaste.py:1397
msgid "[WARNING_NOTCL] No such file or directory"
msgstr "[WARNING_NOTCL] Nu exista un asemenea fişier sau director"

#: FlatCAMObj.py:5835 FlatCAMObj.py:5847
msgid ""
"[WARNING_NOTCL] The used postprocessor file has to have in it's name: "
"'toolchange_custom'"
msgstr ""
"[WARNING_NOTCL] Postprocesorul folosit trebuie să aibă in numele sau: "
"'toolchange_custom'"

#: FlatCAMObj.py:5853
msgid "[ERROR] There is no postprocessor file."
msgstr "[ERROR] Nu exista nici-un fişier postprocesor."

#: FlatCAMTranslation.py:92
msgid "The application will restart."
msgstr "Aplicaţia va reporni ..."

#: FlatCAMTranslation.py:93
#, python-format
msgid "Are you sure do you want to change the current language to %s?"
msgstr "Esti sigur că dorești să schimbi din limba curentă in %s?"

#: FlatCAMTranslation.py:95
msgid "Apply Language ..."
msgstr "Aplică Traducere ..."

#: ObjectCollection.py:420
#, python-brace-format
msgid "Object renamed from <b>{old}</b> to <b>{new}</b>"
msgstr "Obiectul este redenumit din <b>{old}</b> in <b>{new}</b>"

#: ObjectCollection.py:759
#, python-format
msgid "[ERROR] Cause of error: %s"
msgstr "[ERROR] Motivul erorii: %s"

#: camlib.py:197
msgid "[ERROR_NOTCL] self.solid_geometry is neither BaseGeometry or list."
msgstr ""
"[ERROR_NOTCL] self.solid_geometry nu este tip BaseGeometry sau tip lista."

#: camlib.py:1391
msgid "[success] Object was mirrored ..."
msgstr "[success] Obiectul a fost oglindit ..."

#: camlib.py:1393
msgid "[ERROR_NOTCL] Failed to mirror. No object selected"
msgstr "[ERROR_NOTCL] Oglindire eșuata. Nici-un obiect nu este selectat ..."

#: camlib.py:1429
msgid "[success] Object was rotated ..."
msgstr "[success] Obiectul a fost rotit ..."

#: camlib.py:1431
msgid "[ERROR_NOTCL] Failed to rotate. No object selected"
msgstr "[ERROR_NOTCL] Rotaţie eșuata. Nici-un obiect nu este selectat ..."

#: camlib.py:1465
msgid "[success] Object was skewed ..."
msgstr "[success] Obiectul a fost deformat ..."

#: camlib.py:1467
msgid "[ERROR_NOTCL] Failed to skew. No object selected"
msgstr "[ERROR_NOTCL] Deformare eșuata. Nici-un obiect nu este selectat ..."

#: camlib.py:2728 camlib.py:2813
#, python-format
msgid "[WARNING] Coordinates missing, line ignored: %s"
msgstr "[WARNING] Coordonatele lipsesc, linia este ignorata: %s"

#: camlib.py:2729 camlib.py:2814
msgid "[WARNING_NOTCL] GERBER file might be CORRUPT. Check the file !!!"
msgstr ""
"[WARNING_NOTCL] Fişierul Gerber poate fi corrupt. Verificati fişierul!!!"

#: camlib.py:2778
#, python-format
msgid ""
"[ERROR] Region does not have enough points. File will be processed but there "
"are parser errors. Line number: %s"
msgstr ""
"[ERROR] Regiunea Gerber nu are suficiente puncte. Fişierul va fi procesat "
"dar sunt erori de parsare. Numărul liniei: %s"

#: camlib.py:3170
#, python-format
msgid ""
"[ERROR]Gerber Parser ERROR.\n"
"%s:"
msgstr ""
"[ERROR] Eroare in parserul Gerber.\n"
"%s:"

#: camlib.py:3394
msgid "[success] Gerber Scale done."
msgstr "[success] Scalarea Gerber efectuata."

#: camlib.py:3459
msgid "[success] Gerber Offset done."
msgstr "[success] Offsetare Gerber efectuata."

#: camlib.py:3513
msgid "[success] Gerber Mirror done."
msgstr "[success] Oglindirea Gerber efectuata."

#: camlib.py:3559
msgid "[success] Gerber Skew done."
msgstr "[success] Deformarea Gerber efectuata."

#: camlib.py:3597
msgid "[success] Gerber Rotate done."
msgstr "[success] Rotatia Gerber efectuata."

#: camlib.py:3878
#, python-format
msgid "[ERROR_NOTCL] This is GCODE mark: %s"
msgstr "[ERROR_NOTCL] Acesta este un marcaj Gerber: %s"

#: camlib.py:3993
#, python-format
msgid ""
"[WARNING] No tool diameter info's. See shell.\n"
"A tool change event: T%s was found but the Excellon file have no "
"informations regarding the tool diameters therefore the application will try "
"to load it by using some 'fake' diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."
msgstr ""
"[WARNING] Nu sunt date despre diametrul uneltei. Vezi in Shell.\n"
"Schimbare Unealtă: T%s a fost gasită dar fisierul Excellon nu are info's "
"despre diametrele uneltelor prin urmare aplicatia va folosi valori 'false'.\n"
"Userul trebuie să editeze obictul Excellon rezultat si sa ajusteze "
"diametrele a.i sa reflecte diametrele reale."

#: camlib.py:4458
#, python-brace-format
msgid ""
"[ERROR] Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"
msgstr ""
"[ERROR] Eroare in parserul Excellon.\n"
"Parsare eșuata. Linia {l_nr}: {line}\n"
"\n"

#: camlib.py:4537
msgid ""
"[WARNING] Excellon.create_geometry() -> a drill location was skipped due of "
"not having a tool associated.\n"
"Check the resulting GCode."
msgstr ""
"[WARNING] Excellon.create_geometry() -> o locaţie de găurire a fost sarita "
"deoarece nu are o unealtă asociata.\n"
"Verifică codul G-Code rezultat."

#: camlib.py:5076
#, python-format
msgid "[ERROR] There is no such parameter: %s"
msgstr "[ERROR] Nu exista un asemenea parametru: %s"

#: camlib.py:5146
msgid ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"drill into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."
msgstr ""
"[WARNING] Parametrul >Z tăiere< are o valoare pozitivă. Reprezinta adâncimea "
"de tăiere in material prin urmare poate fi numai negativ.\n"
"Se presupune că este o eroare de tastare astfel ca aplicaţia va converti "
"intr-o valoare negativă. Verifică codul masina (G-Code etc) rezultat."

#: camlib.py:5153 camlib.py:5649 camlib.py:5912
#, python-format
msgid ""
"[WARNING] The Cut Z parameter is zero. There will be no cut, skipping %s file"
msgstr ""
"[WARNING] Parametrul >Z tăiere< este nul. Nu va fi nici-o tăiere prin urmare "
"nu procesam fişierul %s"

#: camlib.py:5382 camlib.py:5479 camlib.py:5537
msgid "[ERROR_NOTCL] The loaded Excellon file has no drills ..."
msgstr "[ERROR_NOTCL] Fişierul Excellon incărcat nu are găuri ..."

#: camlib.py:5484
msgid "[ERROR_NOTCL] Wrong optimization type selected."
msgstr "[ERROR_NOTCL] Un tip de optimizare incorrect  a fost selectat."

#: camlib.py:5637 camlib.py:5900
msgid ""
"[ERROR_NOTCL] Cut_Z parameter is None or zero. Most likely a bad "
"combinations of other parameters."
msgstr ""
"[ERROR_NOTCL] Parametrul >Z tăiere< este None sau zero. Cel mai probabil o "
"combinaţie nefericita de parametri."

#: camlib.py:5642 camlib.py:5905
msgid ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"cut into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"[WARNING] Parametrul >Z tăiere< are o valoare pozitivă. Reprezinta adâncimea "
"de tăiere in material prin urmare poate fi numai negativ.\n"
"Se presupune că este o eroare de tastare astfel ca aplicaţia va converti "
"intr-o valoare negativă. Verifică codul masina (G-Code etc) rezultat."

#: camlib.py:5654 camlib.py:5917
msgid "[ERROR_NOTCL] Travel Z parameter is None or zero."
msgstr "[ERROR_NOTCL] Parametrul >Z deplasare< este None sau zero."

#: camlib.py:5658 camlib.py:5921
msgid ""
"[WARNING] The Travel Z parameter has negative value. It is the height value "
"to travel between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"[WARNING] Parametrul >Z deplasare< are o valoare negativă. Reprezinta "
"Înălţimea la care unealtă se deplasează fără să taie prin urmare poate fi "
"numai pozitiv.\n"
"Se presupune că este o eroare de tastare astfel ca aplicaţia va converti "
"intr-o valoare pozitivă. Verifică codul masina (G-Code etc) rezultat."

#: camlib.py:5665 camlib.py:5928
#, python-format
msgid ""
"[WARNING] The Z Travel parameter is zero. This is dangerous, skipping %s file"
msgstr ""
"[WARNING] Parametrul >Z deplasare< este zero. Aceasta este periculos, prin "
"urmare fişierul %s nu se procesează."

#: camlib.py:5795
#, python-format
msgid "[ERROR]Expected a Geometry, got %s"
msgstr "[ERROR] Se astepta o Geometrie, am primit in schimb %s"

#: camlib.py:5801
msgid ""
"[ERROR_NOTCL] Trying to generate a CNC Job from a Geometry object without "
"solid_geometry."
msgstr ""
"[ERROR_NOTCL] Se încearcă generarea unui CNC Job dintr-un obiect Geometrie "
"fără atributul solid_geometry."

#: camlib.py:5840
msgid ""
"[ERROR_NOTCL] The Tool Offset value is too negative to use for the "
"current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""
"[ERROR_NOTCL] Valoarea pentru >Offset unealtă< este prea negativă pentru a "
"fi folosita. \n"
"Mareste valoarea absoluta și încearcă din nou."

#: camlib.py:6052
msgid "[ERROR_NOTCL] There is no tool data in the SolderPaste geometry."
msgstr ""
"[ERROR_NOTCL] Nu exista date cu privier la unealtă in geometria SolderPaste."

#: flatcamEditors/FlatCAMExcEditor.py:37 flatcamEditors/FlatCAMExcEditor.py:143
#: flatcamEditors/FlatCAMGrbEditor.py:229
#: flatcamEditors/FlatCAMGrbEditor.py:234
msgid "Click to place ..."
msgstr "Click pt a plasa ..."

#: flatcamEditors/FlatCAMExcEditor.py:46
msgid "[WARNING_NOTCL] To add a drill first select a tool"
msgstr ""
"[WARNING_NOTCL] Pentru a adăuga o operaţie de găurire mai intai selectează "
"un burghiu (unealtă)"

#: flatcamEditors/FlatCAMExcEditor.py:62 flatcamEditors/FlatCAMExcEditor.py:166
#: flatcamEditors/FlatCAMExcEditor.py:451
#: flatcamEditors/FlatCAMExcEditor.py:476
#: flatcamEditors/FlatCAMGrbEditor.py:451
#: flatcamEditors/FlatCAMGrbEditor.py:1818
#: flatcamEditors/FlatCAMGrbEditor.py:1846
msgid "Click on target location ..."
msgstr "Click pe locatia tinta ..."

#: flatcamEditors/FlatCAMExcEditor.py:108
msgid "[success] Done. Drill added."
msgstr "[success] Executat. Operaţie de găurire adăugată."

#: flatcamEditors/FlatCAMExcEditor.py:150
msgid "[WARNING_NOTCL] To add an Drill Array first select a tool in Tool Table"
msgstr ""
"[WARNING_NOTCL] Pentru a adăuga o arie de operațiuni de găurire mai intai "
"selectează un burghiu (unealtă)"

#: flatcamEditors/FlatCAMExcEditor.py:183
msgid "Click on the Drill Circular Array Start position"
msgstr "Click pe punctul de Start al ariei de operațiuni de găurire"

#: flatcamEditors/FlatCAMExcEditor.py:205
#: flatcamEditors/FlatCAMGrbEditor.py:494
msgid ""
"[ERROR_NOTCL] The value is not Float. Check for comma instead of dot "
"separator."
msgstr ""
"[ERROR_NOTCL] Valoarea nu este număr Real. Verifică să nu fi folosit virgula "
"in loc de punct ca și separator decimal."

#: flatcamEditors/FlatCAMExcEditor.py:208
#, python-format
msgid "[ERROR_NOTCL] The value is mistyped. Check the value. %s"
msgstr "[ERROR_NOTCL] Valoarea este gresita. Verifică valoarea. %s"

#: flatcamEditors/FlatCAMExcEditor.py:306
msgid "[WARNING_NOTCL] Too many drills for the selected spacing angle."
msgstr ""
"[WARNING_NOTCL] Prea multe operațiuni de găurire pentru unghiul selectat."

#: flatcamEditors/FlatCAMExcEditor.py:323
msgid "[success] Done. Drill Array added."
msgstr "[success] Executat. Aria de operațiuni de găurire a fost adăugată."

#: flatcamEditors/FlatCAMExcEditor.py:334
msgid "Click on the Drill(s) to resize ..."
msgstr ""
"Click pe operațiunile de găurire care se dorește să fie redimensionate ..."

#: flatcamEditors/FlatCAMExcEditor.py:355
msgid ""
"[ERROR_NOTCL] Resize drill(s) failed. Please enter a diameter for resize."
msgstr ""
"[ERROR_NOTCL] Redimensionarea operațiunilor de găurire a eșuat. Adaugă o "
"valoare pentru dimetrul la care se face redimensionarea."

#: flatcamEditors/FlatCAMExcEditor.py:425
msgid "[success] Done. Drill Resize completed."
msgstr "[success] Executat. Redimensionare găurire terminată."

#: flatcamEditors/FlatCAMExcEditor.py:428
msgid "[WARNING_NOTCL] Cancelled. No drills selected for resize ..."
msgstr ""
"[WARNING_NOTCL] Anulat. Nimic nu este selectat pentruredimensionare ..."

#: flatcamEditors/FlatCAMExcEditor.py:453
#: flatcamEditors/FlatCAMGrbEditor.py:1820
msgid "Click on reference location ..."
msgstr "Click pe locatia de referinţă ..."

#: flatcamEditors/FlatCAMExcEditor.py:508
msgid "[success] Done. Drill(s) Move completed."
msgstr "[success] Executat. Operatiile de găurire au fost mutate."

#: flatcamEditors/FlatCAMExcEditor.py:593
msgid "[success] Done. Drill(s) copied."
msgstr "[success] Executat. Operatiile de găurire au fost copiate."

#: flatcamEditors/FlatCAMExcEditor.py:793 flatcamGUI/FlatCAMGUI.py:5038
msgid "Excellon Editor"
msgstr "Editor Excellon"

#: flatcamEditors/FlatCAMExcEditor.py:800
#: flatcamEditors/FlatCAMGrbEditor.py:2308
msgid "Name:"
msgstr "Nume:"

#: flatcamEditors/FlatCAMExcEditor.py:806 flatcamTools/ToolNonCopperClear.py:72
#: flatcamTools/ToolPaint.py:69 flatcamTools/ToolSolderPaste.py:70
msgid "Tools Table"
msgstr "Tabela Unelte"

#: flatcamEditors/FlatCAMExcEditor.py:808 flatcamGUI/ObjectUI.py:535
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""
"Burghie (unelte) in acest obiect Excellon\n"
"când se face găurire."

#: flatcamEditors/FlatCAMExcEditor.py:828
msgid "Add/Delete Tool"
msgstr "Adaugă/Șterge Unealta"

#: flatcamEditors/FlatCAMExcEditor.py:830
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""
"Adaugă/Șterge o unealtă la lista de unelte\n"
"pentru acest obiect Excellon."

#: flatcamEditors/FlatCAMExcEditor.py:838 flatcamTools/ToolCutOut.py:92
msgid "Tool Dia:"
msgstr "Dia. Unealtă:"

#: flatcamEditors/FlatCAMExcEditor.py:840 flatcamGUI/FlatCAMGUI.py:5067
#: flatcamGUI/ObjectUI.py:976
msgid "Diameter for the new tool"
msgstr "Diametru pentru noua unealtă (burghiu, freza)"

#: flatcamEditors/FlatCAMExcEditor.py:848
msgid "Add Tool"
msgstr "Adaugă Unealta"

#: flatcamEditors/FlatCAMExcEditor.py:850
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""
"Adaugă o unealtă noua la lista de unelte\n"
"cu diametrul specificat deasupra."

#: flatcamEditors/FlatCAMExcEditor.py:862
msgid "Delete Tool"
msgstr "Șterge Unealta"

#: flatcamEditors/FlatCAMExcEditor.py:864
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""
"Șterge o unealtă in lista de unelte\n"
"prin selectarea unei linii in tabela de unelte."

#: flatcamEditors/FlatCAMExcEditor.py:882
msgid "Resize Drill(s)"
msgstr "Redimensionare operațiuni de găurire"

#: flatcamEditors/FlatCAMExcEditor.py:884
msgid "Resize a drill or a selection of drills."
msgstr ""
"Redimensionează o operaţie de găurire sau o selecţie de operațiuni de "
"găurire."

#: flatcamEditors/FlatCAMExcEditor.py:891
msgid "Resize Dia:"
msgstr "Redimensionare Dia:"

#: flatcamEditors/FlatCAMExcEditor.py:893
msgid "Diameter to resize to."
msgstr "Diametrul la care se face redimensionarea."

#: flatcamEditors/FlatCAMExcEditor.py:901
msgid "Resize"
msgstr "Redimensionează"

#: flatcamEditors/FlatCAMExcEditor.py:903
msgid "Resize drill(s)"
msgstr "Redimensionează op. de găurire."

#: flatcamEditors/FlatCAMExcEditor.py:925 flatcamGUI/FlatCAMGUI.py:1631
msgid "Add Drill Array"
msgstr "Adaugă o arie de op. găurire"

#: flatcamEditors/FlatCAMExcEditor.py:927
msgid "Add an array of drills (linear or circular array)"
msgstr "Adaugă o arie de operațiuni de găurire (arie lineara sau circulara)."

#: flatcamEditors/FlatCAMExcEditor.py:933
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Selectează tipul de arii de operațiuni de găurire.\n"
"Poate fi Liniar X(Y) sau Circular."

#: flatcamEditors/FlatCAMExcEditor.py:936
#: flatcamEditors/FlatCAMGrbEditor.py:2595
msgid "Linear"
msgstr "Liniar"

#: flatcamEditors/FlatCAMExcEditor.py:937
#: flatcamEditors/FlatCAMGrbEditor.py:2596
msgid "Circular"
msgstr "Circular"

#: flatcamEditors/FlatCAMExcEditor.py:945 flatcamGUI/FlatCAMGUI.py:5077
msgid "Nr of drills:"
msgstr "Nr. op. găurire"

#: flatcamEditors/FlatCAMExcEditor.py:947 flatcamGUI/FlatCAMGUI.py:5079
msgid "Specify how many drills to be in the array."
msgstr "Specifica cate operațiuni de găurire să fie incluse in arie."

#: flatcamEditors/FlatCAMExcEditor.py:965
#: flatcamEditors/FlatCAMExcEditor.py:1011
#: flatcamEditors/FlatCAMGrbEditor.py:2622
#: flatcamEditors/FlatCAMGrbEditor.py:2667
msgid "Direction:"
msgstr "Direcţie:"

#: flatcamEditors/FlatCAMExcEditor.py:967
#: flatcamEditors/FlatCAMGrbEditor.py:2624 flatcamGUI/FlatCAMGUI.py:5094
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""
"Directia in care aria lineara este orientata:\n"
"- 'X' - pe axa orizontala \n"
"- 'Y' - pe axa verticala sau \n"
"- 'Unghi' - un unghi particular pentru inclinatia ariei"

#: flatcamEditors/FlatCAMExcEditor.py:974
#: flatcamEditors/FlatCAMGrbEditor.py:2631 flatcamGUI/FlatCAMGUI.py:5100
msgid "X"
msgstr "X"

#: flatcamEditors/FlatCAMExcEditor.py:975
#: flatcamEditors/FlatCAMGrbEditor.py:2632 flatcamGUI/FlatCAMGUI.py:5101
msgid "Y"
msgstr "Y"

#: flatcamEditors/FlatCAMExcEditor.py:976
#: flatcamEditors/FlatCAMGrbEditor.py:2633 flatcamGUI/FlatCAMGUI.py:5102
msgid "Angle"
msgstr "Unghi"

#: flatcamEditors/FlatCAMExcEditor.py:980
#: flatcamEditors/FlatCAMGrbEditor.py:2637 flatcamGUI/FlatCAMGUI.py:5108
msgid "Pitch:"
msgstr "Pas:"

#: flatcamEditors/FlatCAMExcEditor.py:982
#: flatcamEditors/FlatCAMGrbEditor.py:2639 flatcamGUI/FlatCAMGUI.py:5110
msgid "Pitch = Distance between elements of the array."
msgstr "Pas = Distanta între elementele ariei."

#: flatcamEditors/FlatCAMExcEditor.py:990
#: flatcamEditors/FlatCAMExcEditor.py:1025
#: flatcamEditors/FlatCAMGeoEditor.py:665
#: flatcamEditors/FlatCAMGrbEditor.py:2646
#: flatcamEditors/FlatCAMGrbEditor.py:2682
#: flatcamEditors/FlatCAMGrbEditor.py:4743 flatcamGUI/FlatCAMGUI.py:5119
#: flatcamTools/ToolTransform.py:68
msgid "Angle:"
msgstr "Unghi:"

#: flatcamEditors/FlatCAMExcEditor.py:992
#: flatcamEditors/FlatCAMGrbEditor.py:2648
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Unghiul global la care aria lineara este plasata.\n"
"Precizia este de max 2 zecimale.\n"
"Val minima este: -359.99 grade.\n"
"Val maxima este:  360.00 grade."

#: flatcamEditors/FlatCAMExcEditor.py:1013
#: flatcamEditors/FlatCAMGrbEditor.py:2669
msgid ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."
msgstr ""
"Directia pentru aria circulara. Poate fi CW = in sensul acelor de ceasornic "
"sau CCW = invers acelor de ceasornic"

#: flatcamEditors/FlatCAMExcEditor.py:1021
#: flatcamEditors/FlatCAMGrbEditor.py:2677 flatcamGUI/FlatCAMGUI.py:4703
#: flatcamGUI/FlatCAMGUI.py:5138 flatcamGUI/FlatCAMGUI.py:5327
msgid "CW"
msgstr "Orar"

#: flatcamEditors/FlatCAMExcEditor.py:1022
#: flatcamEditors/FlatCAMGrbEditor.py:2678 flatcamGUI/FlatCAMGUI.py:4704
#: flatcamGUI/FlatCAMGUI.py:5139 flatcamGUI/FlatCAMGUI.py:5328
msgid "CCW"
msgstr "Antiorar"

#: flatcamEditors/FlatCAMExcEditor.py:1027
#: flatcamEditors/FlatCAMGrbEditor.py:2684 flatcamGUI/FlatCAMGUI.py:5121
#: flatcamGUI/FlatCAMGUI.py:5147
msgid "Angle at which each element in circular array is placed."
msgstr ""
"Unghiul la care fiecare element al ariei circulare este plasat fata de "
"originea ariei."

#: flatcamEditors/FlatCAMExcEditor.py:1488
msgid ""
"[WARNING_NOTCL] Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""
"[WARNING_NOTCL] Unealta este deja in lista originala sau actuala de unelte.\n"
"Salvează și reeditează obiectul Excellon daca ai nevoie să adaugi aceasta "
"unealtă."

#: flatcamEditors/FlatCAMExcEditor.py:1497 flatcamGUI/FlatCAMGUI.py:3027
#, python-brace-format
msgid "[success] Added new tool with dia: {dia} {units}"
msgstr "[success] O noua unealtă este adăugată cu diametrul: {dia} {units}"

#: flatcamEditors/FlatCAMExcEditor.py:1529
msgid "[WARNING_NOTCL] Select a tool in Tool Table"
msgstr "[WARNING_NOTCL] Selectează o unealtă in Tabela de Unelte"

#: flatcamEditors/FlatCAMExcEditor.py:1561
#, python-brace-format
msgid "[success] Deleted tool with dia: {del_dia} {units}"
msgstr "[success] Unealta stearsa cu diametrul: {del_dia} {units}"

#: flatcamEditors/FlatCAMExcEditor.py:2075
msgid ""
"[ERROR_NOTCL] There are no Tools definitions in the file. Aborting Excellon "
"creation."
msgstr ""
"[ERROR_NOTCL] Nu exista definitii de unelte in fişier. Se anulează crearea "
"de obiect Excellon."

#: flatcamEditors/FlatCAMExcEditor.py:2084
msgid "Creating Excellon."
msgstr "In curs de creere Excellon."

#: flatcamEditors/FlatCAMExcEditor.py:2093
msgid "[success] Excellon editing finished."
msgstr "[success] Editarea Excellon a fost terminată."

#: flatcamEditors/FlatCAMExcEditor.py:2110
msgid "[WARNING_NOTCL] Cancelled. There is no Tool/Drill selected"
msgstr ""
"[WARNING_NOTCL] Anulata. Nu este selectată nici-o unealtă sau op. de găurire."

#: flatcamEditors/FlatCAMExcEditor.py:2638
msgid "[success] Done. Drill(s) deleted."
msgstr "[success] Executat. Operatiile de găurire șterse."

#: flatcamEditors/FlatCAMExcEditor.py:2706
#: flatcamEditors/FlatCAMGrbEditor.py:4461
msgid "Click on the circular array Center position"
msgstr "Click pe punctul de Centru al ariei circulare."

#: flatcamEditors/FlatCAMGeoEditor.py:80
#: flatcamEditors/FlatCAMGrbEditor.py:2460
msgid "Buffer distance:"
msgstr "Distanta pt bufer:"

#: flatcamEditors/FlatCAMGeoEditor.py:81
#: flatcamEditors/FlatCAMGrbEditor.py:2461
msgid "Buffer corner:"
msgstr "Coltul pt bufer:"

#: flatcamEditors/FlatCAMGeoEditor.py:83
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"Sunt disponibile 3 tipuri de colțuri:\n"
" - 'Rotund': coltul este rotunjit in cazul buferului exterior.\n"
" - 'Patrat:' colțurile formează unghi de 90 grade pt buferul exterior\n"
" - 'Beveled:' coltul este inlocuit cu o linie care uneste capetele liniilor "
"care formează coltul"

#: flatcamEditors/FlatCAMGeoEditor.py:89
#: flatcamEditors/FlatCAMGrbEditor.py:2469
msgid "Round"
msgstr "Rotund"

#: flatcamEditors/FlatCAMGeoEditor.py:90
#: flatcamEditors/FlatCAMGrbEditor.py:2470
msgid "Square"
msgstr "Patrat"

#: flatcamEditors/FlatCAMGeoEditor.py:91
#: flatcamEditors/FlatCAMGrbEditor.py:2471
msgid "Beveled"
msgstr "Beveled"

#: flatcamEditors/FlatCAMGeoEditor.py:98
msgid "Buffer Interior"
msgstr "Bufer interior"

#: flatcamEditors/FlatCAMGeoEditor.py:100
msgid "Buffer Exterior"
msgstr "Bufer Exterior"

#: flatcamEditors/FlatCAMGeoEditor.py:106
msgid "Full Buffer"
msgstr "Bufer complet"

#: flatcamEditors/FlatCAMGeoEditor.py:127
#: flatcamEditors/FlatCAMGeoEditor.py:2682
msgid "Buffer Tool"
msgstr "Unealta Bufer"

#: flatcamEditors/FlatCAMGeoEditor.py:138
#: flatcamEditors/FlatCAMGeoEditor.py:155
#: flatcamEditors/FlatCAMGeoEditor.py:172
#: flatcamEditors/FlatCAMGeoEditor.py:2700
#: flatcamEditors/FlatCAMGeoEditor.py:2726
#: flatcamEditors/FlatCAMGeoEditor.py:2752
#: flatcamEditors/FlatCAMGrbEditor.py:4513
msgid ""
"[WARNING_NOTCL] Buffer distance value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Valoarea distantei bufer lipseste sau este intr-un format "
"gresit. Adaugă din nou și reîncearcă."

#: flatcamEditors/FlatCAMGeoEditor.py:343
msgid "Text Tool"
msgstr "Unealta Text"

#: flatcamEditors/FlatCAMGeoEditor.py:401 flatcamGUI/FlatCAMGUI.py:810
msgid "Tool"
msgstr "Unealta"

#: flatcamEditors/FlatCAMGeoEditor.py:432 flatcamGUI/FlatCAMGUI.py:4084
#: flatcamGUI/FlatCAMGUI.py:5193 flatcamGUI/FlatCAMGUI.py:5627
#: flatcamGUI/FlatCAMGUI.py:5904 flatcamGUI/FlatCAMGUI.py:6059
#: flatcamGUI/ObjectUI.py:259
msgid "Tool dia:"
msgstr "Dia unealtă:"

#: flatcamEditors/FlatCAMGeoEditor.py:434 flatcamGUI/FlatCAMGUI.py:6061
msgid ""
"Diameter of the tool to\n"
"be used in the operation."
msgstr ""
"Diametrul uneltei care este utilizata in operaţie. \n"
"Este și lăţimea de tăiere pentru uneltele cilindrice."

#: flatcamEditors/FlatCAMGeoEditor.py:443 flatcamGUI/FlatCAMGUI.py:5810
#: flatcamGUI/FlatCAMGUI.py:6070 flatcamTools/ToolNonCopperClear.py:165
#: flatcamTools/ToolPaint.py:160
msgid "Overlap Rate:"
msgstr "Rata suprapunere:"

#: flatcamEditors/FlatCAMGeoEditor.py:445 flatcamTools/ToolPaint.py:162
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"Cat de mult (fracţie) din diametrul uneltei să se suprapună la fiecare "
"trecere a uneltei.\n"
"Exemplu:\n"
"O valoare aici de 0.25 inseamna 25% din diametrul uneltei de mai sus.\n"
"\n"
"Ajustează valoarea incepand de la valori mici și pe urma creste daca ariile "
"care ar trebui\n"
" >pictate< inca nu sunt procesate.\n"
"Valori scazute = procesare rapida,execuţie rapida a PCB-ului.\n"
"Valori mari= procesare lenta cat și o execuţie la fel de lenta a PCB-ului,\n"
"datorita numărului mai mare de treceri-tăiere."

#: flatcamEditors/FlatCAMGeoEditor.py:461 flatcamGUI/FlatCAMGUI.py:5826
#: flatcamGUI/FlatCAMGUI.py:5927 flatcamGUI/FlatCAMGUI.py:6080
#: flatcamTools/ToolCutOut.py:101 flatcamTools/ToolNonCopperClear.py:181
#: flatcamTools/ToolPaint.py:177
msgid "Margin:"
msgstr "Margine:"

#: flatcamEditors/FlatCAMGeoEditor.py:463 flatcamGUI/FlatCAMGUI.py:6082
#: flatcamTools/ToolPaint.py:179
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""
"Distanta fata de marginile\n"
"poligonului care trebuie\n"
"să fie >pictat<."

#: flatcamEditors/FlatCAMGeoEditor.py:472 flatcamGUI/FlatCAMGUI.py:5835
#: flatcamGUI/FlatCAMGUI.py:6091 flatcamTools/ToolNonCopperClear.py:190
#: flatcamTools/ToolPaint.py:188
msgid "Method:"
msgstr "Metoda:"

#: flatcamEditors/FlatCAMGeoEditor.py:474 flatcamGUI/FlatCAMGUI.py:6093
msgid ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."
msgstr ""
"Algoritm pentru a picta poligonul<BR><B>Standard</B>: Pas fix spre interior."
"<BR><B>Samanta</B>: Spre exterior pornind de la un punct-samanta."

#: flatcamEditors/FlatCAMGeoEditor.py:480 flatcamGUI/FlatCAMGUI.py:5844
#: flatcamGUI/FlatCAMGUI.py:6099 flatcamTools/ToolNonCopperClear.py:199
#: flatcamTools/ToolPaint.py:197
msgid "Standard"
msgstr "Standard"

#: flatcamEditors/FlatCAMGeoEditor.py:481 flatcamGUI/FlatCAMGUI.py:5845
#: flatcamGUI/FlatCAMGUI.py:6100 flatcamTools/ToolNonCopperClear.py:200
#: flatcamTools/ToolPaint.py:198
msgid "Seed-based"
msgstr "Punct-samanta"

#: flatcamEditors/FlatCAMGeoEditor.py:482 flatcamGUI/FlatCAMGUI.py:5846
#: flatcamGUI/FlatCAMGUI.py:6101 flatcamTools/ToolNonCopperClear.py:201
#: flatcamTools/ToolPaint.py:199
msgid "Straight lines"
msgstr "Linii drepte"

#: flatcamEditors/FlatCAMGeoEditor.py:487 flatcamGUI/FlatCAMGUI.py:5851
#: flatcamGUI/FlatCAMGUI.py:6106 flatcamTools/ToolNonCopperClear.py:206
#: flatcamTools/ToolPaint.py:204
msgid "Connect:"
msgstr "Conectează:"

#: flatcamEditors/FlatCAMGeoEditor.py:489 flatcamGUI/FlatCAMGUI.py:5853
#: flatcamGUI/FlatCAMGUI.py:6108 flatcamTools/ToolNonCopperClear.py:208
#: flatcamTools/ToolPaint.py:206
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""
"Desenează linii între segmentele\n"
"rezultate pentru a minimiza miscarile\n"
"de ridicare a uneltei."

#: flatcamEditors/FlatCAMGeoEditor.py:496 flatcamGUI/FlatCAMGUI.py:5860
#: flatcamGUI/FlatCAMGUI.py:6116 flatcamTools/ToolNonCopperClear.py:215
#: flatcamTools/ToolPaint.py:213
msgid "Contour:"
msgstr "Contur:"

#: flatcamEditors/FlatCAMGeoEditor.py:498 flatcamGUI/FlatCAMGUI.py:5862
#: flatcamGUI/FlatCAMGUI.py:6118 flatcamTools/ToolNonCopperClear.py:217
#: flatcamTools/ToolPaint.py:215
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""
"Taie de-a lungul perimetrului poligonului\n"
"pentru a elimina bavurile."

#: flatcamEditors/FlatCAMGeoEditor.py:509
msgid "Paint"
msgstr "Pictează"

#: flatcamEditors/FlatCAMGeoEditor.py:527 flatcamGUI/FlatCAMGUI.py:647
#: flatcamGUI/FlatCAMGUI.py:1885 flatcamGUI/ObjectUI.py:1312
#: flatcamTools/ToolPaint.py:340
msgid "Paint Tool"
msgstr "Unealta Paint"

#: flatcamEditors/FlatCAMGeoEditor.py:563
msgid "[WARNING_NOTCL] Paint cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Operaţie Paint anulată. Nici-o forma selectată."

#: flatcamEditors/FlatCAMGeoEditor.py:574 flatcamTools/ToolCutOut.py:372
#: flatcamTools/ToolCutOut.py:565 flatcamTools/ToolCutOut.py:727
#: flatcamTools/ToolCutOut.py:834 flatcamTools/ToolDblSided.py:362
msgid ""
"[WARNING_NOTCL] Tool diameter value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Diametrul uneltei lipseste sau este intr-un format "
"incompatibil. Adaugă-l și reîncearcă."

#: flatcamEditors/FlatCAMGeoEditor.py:585
msgid ""
"[WARNING_NOTCL] Overlap value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Valoarea de suprapunere a uneltei lipseste sau este intr-un "
"format incompatibil. Adaugă-o și reîncearcă."

#: flatcamEditors/FlatCAMGeoEditor.py:597
msgid ""
"[WARNING_NOTCL] Margin distance value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Valoarea de margine lipseste sau este intr-un format "
"incompatibil. Adaugă-o și reîncearcă."

#: flatcamEditors/FlatCAMGeoEditor.py:606
#: flatcamEditors/FlatCAMGeoEditor.py:2707
#: flatcamEditors/FlatCAMGeoEditor.py:2733
#: flatcamEditors/FlatCAMGeoEditor.py:2759
#: flatcamTools/ToolNonCopperClear.py:817 flatcamTools/ToolProperties.py:104
msgid "Tools"
msgstr "Unelte"

#: flatcamEditors/FlatCAMGeoEditor.py:617
#: flatcamEditors/FlatCAMGeoEditor.py:990
#: flatcamEditors/FlatCAMGrbEditor.py:4694
#: flatcamEditors/FlatCAMGrbEditor.py:5079 flatcamGUI/FlatCAMGUI.py:658
#: flatcamGUI/FlatCAMGUI.py:1898 flatcamTools/ToolTransform.py:397
msgid "Transform Tool"
msgstr "Unealta Transformare"

#: flatcamEditors/FlatCAMGeoEditor.py:618
#: flatcamEditors/FlatCAMGeoEditor.py:679
#: flatcamEditors/FlatCAMGrbEditor.py:4695
#: flatcamEditors/FlatCAMGrbEditor.py:4757 flatcamTools/ToolTransform.py:24
#: flatcamTools/ToolTransform.py:82
msgid "Rotate"
msgstr "Rotaţie"

#: flatcamEditors/FlatCAMGeoEditor.py:619
#: flatcamEditors/FlatCAMGrbEditor.py:4696 flatcamTools/ToolTransform.py:25
msgid "Skew/Shear"
msgstr "Deformare"

#: flatcamEditors/FlatCAMGeoEditor.py:620
#: flatcamEditors/FlatCAMGrbEditor.py:2516
#: flatcamEditors/FlatCAMGrbEditor.py:4697 flatcamGUI/FlatCAMGUI.py:722
#: flatcamGUI/FlatCAMGUI.py:1966 flatcamGUI/ObjectUI.py:100
#: flatcamTools/ToolTransform.py:26
msgid "Scale"
msgstr "Scalare"

#: flatcamEditors/FlatCAMGeoEditor.py:621
#: flatcamEditors/FlatCAMGrbEditor.py:4698 flatcamTools/ToolTransform.py:27
msgid "Mirror (Flip)"
msgstr "Oglindire"

#: flatcamEditors/FlatCAMGeoEditor.py:622
#: flatcamEditors/FlatCAMGrbEditor.py:4699 flatcamGUI/ObjectUI.py:127
#: flatcamGUI/ObjectUI.py:888 flatcamGUI/ObjectUI.py:1462
#: flatcamTools/ToolTransform.py:28
msgid "Offset"
msgstr "Ofset"

#: flatcamEditors/FlatCAMGeoEditor.py:633
#: flatcamEditors/FlatCAMGrbEditor.py:4711
#, python-format
msgid "Editor %s"
msgstr "Editor %s"

#: flatcamEditors/FlatCAMGeoEditor.py:667
#: flatcamEditors/FlatCAMGrbEditor.py:4745 flatcamTools/ToolTransform.py:70
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""
"Unghiul pentru Rotaţie, in grade. Număr Real cu valori între -360 și  359.\n"
"Numerele pozitive inseamna o mișcare in sens ace ceasornic.\n"
"Numerele negative inseamna o mișcare in sens invers ace ceasornic."

#: flatcamEditors/FlatCAMGeoEditor.py:681
#: flatcamEditors/FlatCAMGrbEditor.py:4759
msgid ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Roteste formele selectate.\n"
"Punctul de referinţă este mijlocul\n"
"formei înconjurătoare care cuprinde\n"
"toate formele selectate."

#: flatcamEditors/FlatCAMGeoEditor.py:704
#: flatcamEditors/FlatCAMGrbEditor.py:4782 flatcamTools/ToolTransform.py:107
msgid "Angle X:"
msgstr "Unghi X:"

#: flatcamEditors/FlatCAMGeoEditor.py:706
#: flatcamEditors/FlatCAMGeoEditor.py:724
#: flatcamEditors/FlatCAMGrbEditor.py:4784
#: flatcamEditors/FlatCAMGrbEditor.py:4802 flatcamTools/ToolTransform.py:109
#: flatcamTools/ToolTransform.py:127
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""
"Valoarea unghiului de Deformare, in grade.\n"
"Ia valori Reale între -360 and 359 grade."

#: flatcamEditors/FlatCAMGeoEditor.py:715
#: flatcamEditors/FlatCAMGrbEditor.py:4793 flatcamTools/ToolTransform.py:118
msgid "Skew X"
msgstr "Deformare X"

#: flatcamEditors/FlatCAMGeoEditor.py:717
#: flatcamEditors/FlatCAMGeoEditor.py:735
#: flatcamEditors/FlatCAMGrbEditor.py:4795
#: flatcamEditors/FlatCAMGrbEditor.py:4813
msgid ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Deformează formele selectate.\n"
"Punctul de referinţă este mijlocul\n"
"formei înconjurătoare care cuprinde\n"
"toate formele selectate."

#: flatcamEditors/FlatCAMGeoEditor.py:722
#: flatcamEditors/FlatCAMGrbEditor.py:4800 flatcamTools/ToolTransform.py:125
msgid "Angle Y:"
msgstr "Unghi Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:733
#: flatcamEditors/FlatCAMGrbEditor.py:4811 flatcamTools/ToolTransform.py:136
msgid "Skew Y"
msgstr "Deformare Y"

#: flatcamEditors/FlatCAMGeoEditor.py:761
#: flatcamEditors/FlatCAMGrbEditor.py:4839 flatcamTools/ToolTransform.py:164
msgid "Factor X:"
msgstr "Factor X:"

#: flatcamEditors/FlatCAMGeoEditor.py:763
#: flatcamEditors/FlatCAMGrbEditor.py:4841 flatcamTools/ToolTransform.py:166
msgid "Factor for Scale action over X axis."
msgstr "Factor pentru scalarea pe axa X"

#: flatcamEditors/FlatCAMGeoEditor.py:771
#: flatcamEditors/FlatCAMGrbEditor.py:4849 flatcamTools/ToolTransform.py:174
msgid "Scale X"
msgstr "Scalează X"

#: flatcamEditors/FlatCAMGeoEditor.py:773
#: flatcamEditors/FlatCAMGeoEditor.py:790
#: flatcamEditors/FlatCAMGrbEditor.py:4851
#: flatcamEditors/FlatCAMGrbEditor.py:4868
msgid ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scalează formele selectate.\n"
"Punctul de referinţă depinde de  \n"
"starea checkbox-ului >Referința scalare<."

#: flatcamEditors/FlatCAMGeoEditor.py:778
#: flatcamEditors/FlatCAMGrbEditor.py:4856 flatcamTools/ToolTransform.py:181
msgid "Factor Y:"
msgstr "Factor Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:780
#: flatcamEditors/FlatCAMGrbEditor.py:4858 flatcamTools/ToolTransform.py:183
msgid "Factor for Scale action over Y axis."
msgstr "Factor pentru scalarea pe axa Y."

#: flatcamEditors/FlatCAMGeoEditor.py:788
#: flatcamEditors/FlatCAMGrbEditor.py:4866 flatcamTools/ToolTransform.py:191
msgid "Scale Y"
msgstr "Scalează Y"

#: flatcamEditors/FlatCAMGeoEditor.py:797
#: flatcamEditors/FlatCAMGrbEditor.py:4875 flatcamGUI/FlatCAMGUI.py:6465
#: flatcamTools/ToolTransform.py:200
msgid "Link"
msgstr "Legatura"

#: flatcamEditors/FlatCAMGeoEditor.py:799
#: flatcamEditors/FlatCAMGrbEditor.py:4877
msgid ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scalează formele selectate\n"
"folsoind factorul: Factor X pentru ambele axe."

#: flatcamEditors/FlatCAMGeoEditor.py:805
#: flatcamEditors/FlatCAMGrbEditor.py:4883 flatcamGUI/FlatCAMGUI.py:6473
#: flatcamTools/ToolTransform.py:208
msgid "Scale Reference"
msgstr "Referința scalare"

#: flatcamEditors/FlatCAMGeoEditor.py:807
#: flatcamEditors/FlatCAMGrbEditor.py:4885
msgid ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."
msgstr ""
"Scalează formele selectate.\n"
"Punctul de referinţă este mijlocul\n"
"formei înconjurătoare care cuprinde\n"
"toate formele selectate când nu este\n"
"bifat și este originea când este bifat."

#: flatcamEditors/FlatCAMGeoEditor.py:835
#: flatcamEditors/FlatCAMGrbEditor.py:4914 flatcamTools/ToolTransform.py:238
msgid "Value X:"
msgstr "Valoare X:"

#: flatcamEditors/FlatCAMGeoEditor.py:837
#: flatcamEditors/FlatCAMGrbEditor.py:4916 flatcamTools/ToolTransform.py:240
msgid "Value for Offset action on X axis."
msgstr "Valoare pentru deplasarea pe axa X."

#: flatcamEditors/FlatCAMGeoEditor.py:845
#: flatcamEditors/FlatCAMGrbEditor.py:4924 flatcamTools/ToolTransform.py:248
msgid "Offset X"
msgstr "Ofset pe X"

#: flatcamEditors/FlatCAMGeoEditor.py:847
#: flatcamEditors/FlatCAMGeoEditor.py:865
#: flatcamEditors/FlatCAMGrbEditor.py:4926
#: flatcamEditors/FlatCAMGrbEditor.py:4944
msgid ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"
msgstr ""
"Deplasează formele selectate\n"
"Punctul de referinţă este mijlocul\n"
"formei înconjurătoare care cuprinde\n"
"toate formele selectate.\n"

#: flatcamEditors/FlatCAMGeoEditor.py:853
#: flatcamEditors/FlatCAMGrbEditor.py:4932 flatcamTools/ToolTransform.py:255
msgid "Value Y:"
msgstr "Valoare Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:855
#: flatcamEditors/FlatCAMGrbEditor.py:4934 flatcamTools/ToolTransform.py:257
msgid "Value for Offset action on Y axis."
msgstr "Valoare pentru deplasarea pe axa Y."

#: flatcamEditors/FlatCAMGeoEditor.py:863
#: flatcamEditors/FlatCAMGrbEditor.py:4942 flatcamTools/ToolTransform.py:265
msgid "Offset Y"
msgstr "Ofset pe Y"

#: flatcamEditors/FlatCAMGeoEditor.py:894
#: flatcamEditors/FlatCAMGrbEditor.py:4973 flatcamTools/ToolTransform.py:295
msgid "Flip on X"
msgstr "Oglindește pe X"

#: flatcamEditors/FlatCAMGeoEditor.py:896
#: flatcamEditors/FlatCAMGeoEditor.py:904
#: flatcamEditors/FlatCAMGrbEditor.py:4975
#: flatcamEditors/FlatCAMGrbEditor.py:4983
msgid ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."
msgstr ""
"Oglindește formele selectate peste axa X\n"
"Nu crează noi forme."

#: flatcamEditors/FlatCAMGeoEditor.py:902
#: flatcamEditors/FlatCAMGrbEditor.py:4981 flatcamTools/ToolTransform.py:303
msgid "Flip on Y"
msgstr "Oglindește pe Y"

#: flatcamEditors/FlatCAMGeoEditor.py:911
#: flatcamEditors/FlatCAMGrbEditor.py:4990 flatcamTools/ToolTransform.py:312
msgid "Ref Pt"
msgstr "Pt ref"

#: flatcamEditors/FlatCAMGeoEditor.py:913
#: flatcamEditors/FlatCAMGrbEditor.py:4992
msgid ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Oglindește formele selectate\n"
"in jurul punctului din câmpul >Punct<\n"
"\n"
"Coordonatele punctului pot fi obtinute\n"
"prin click pe canvas in timp ce se tine apasata\n"
"tasta SHIFT.\n"
"Apoi click pe butonul >Adaugă< pentru a insera\n"
"coordonatele.\n"
"Alternativ se pot introduce manual in formatul (x, y). \n"
"La final click pe >Oglindește pe X(Y)<."

#: flatcamEditors/FlatCAMGeoEditor.py:925
#: flatcamEditors/FlatCAMGrbEditor.py:5004 flatcamTools/ToolTransform.py:325
msgid "Point:"
msgstr "Punct:"

#: flatcamEditors/FlatCAMGeoEditor.py:927
#: flatcamEditors/FlatCAMGrbEditor.py:5006
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."
msgstr ""
"Coordonatele in format (x, y) folosite pentru oglindire.\n"
"Valoarea 'x' in (x, y) va fi folosita când se face oglindire pe X\n"
"și valoarea 'y' in (x, y) va fi folosita când se face oglindire pe Y."

#: flatcamEditors/FlatCAMGeoEditor.py:939
#: flatcamEditors/FlatCAMGrbEditor.py:5018 flatcamTools/ToolTransform.py:339
msgid ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."
msgstr ""
"Coordonatele punctului se pot obtine\n"
"prin click pe canvas in timp ce se tine apasata\n"
"tasta SHIFT.\n"
"La final, apasa butonul >Adaugă< pt a le insera."

#: flatcamEditors/FlatCAMGeoEditor.py:1054
#: flatcamEditors/FlatCAMGrbEditor.py:5143
msgid "[WARNING_NOTCL] Transformation cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Transformare anulată. Nici-o formă nu este selectată."

#: flatcamEditors/FlatCAMGeoEditor.py:1075
#: flatcamEditors/FlatCAMGrbEditor.py:5163 flatcamTools/ToolTransform.py:467
msgid "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."
msgstr ""
"[ERROR_NOTCL] Valoare incorecta intodusa pentru Rotaţie, foloseşte un număr "
"Real."

#: flatcamEditors/FlatCAMGeoEditor.py:1112
#: flatcamEditors/FlatCAMGrbEditor.py:5206 flatcamTools/ToolTransform.py:501
msgid "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."
msgstr ""
"[ERROR_NOTCL] Valoare incorecta intodusa pentru Deformare X, foloseşte un "
"număr Real."

#: flatcamEditors/FlatCAMGeoEditor.py:1133
#: flatcamEditors/FlatCAMGrbEditor.py:5233 flatcamTools/ToolTransform.py:519
msgid "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."
msgstr ""
"[ERROR_NOTCL] Valoare incorecta intodusa pentru Deformare Y, foloseşte un "
"număr Real."

#: flatcamEditors/FlatCAMGeoEditor.py:1154
#: flatcamEditors/FlatCAMGrbEditor.py:5260 flatcamTools/ToolTransform.py:537
msgid "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."
msgstr ""
"[ERROR_NOTCL] Valoare incorecta intodusa pentru Scalare X, foloseşte un "
"număr Real."

#: flatcamEditors/FlatCAMGeoEditor.py:1191
#: flatcamEditors/FlatCAMGrbEditor.py:5301 flatcamTools/ToolTransform.py:571
msgid "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."
msgstr ""
"[ERROR_NOTCL] Valoare incorecta intodusa pentru Scalare Y, foloseşte un "
"număr Real."

#: flatcamEditors/FlatCAMGeoEditor.py:1223
#: flatcamEditors/FlatCAMGrbEditor.py:5339 flatcamTools/ToolTransform.py:600
msgid "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."
msgstr ""
"[ERROR_NOTCL] Valoare incorecta intodusa pentru Ofset pe X, foloseşte un "
"număr Real."

#: flatcamEditors/FlatCAMGeoEditor.py:1244
#: flatcamEditors/FlatCAMGrbEditor.py:5365 flatcamTools/ToolTransform.py:618
msgid "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."
msgstr ""
"[ERROR_NOTCL] Valoare incorecta intodusa pentru Ofset pe Y, foloseşte un "
"număr Real."

#: flatcamEditors/FlatCAMGeoEditor.py:1262
#: flatcamEditors/FlatCAMGrbEditor.py:5388
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to rotate!"
msgstr ""
"[WARNING_NOTCL] Nici-o forma nu este selectată. Selectează o forma pentru a "
"putea face Rotaţie!"

#: flatcamEditors/FlatCAMGeoEditor.py:1265
#: flatcamEditors/FlatCAMGrbEditor.py:5391 flatcamTools/ToolTransform.py:639
msgid "Appying Rotate"
msgstr "Execuţie Rotaţie"

#: flatcamEditors/FlatCAMGeoEditor.py:1293
#: flatcamEditors/FlatCAMGrbEditor.py:5424
msgid "[success] Done. Rotate completed."
msgstr "[success] Executat. Rotaţie finalizata."

#: flatcamEditors/FlatCAMGeoEditor.py:1309
#: flatcamEditors/FlatCAMGrbEditor.py:5443
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to flip!"
msgstr ""
"[WARNING_NOTCL] Nici-o forma nu este selectată. Selectează o forma pentru a "
"putea face Oglindire!"

#: flatcamEditors/FlatCAMGeoEditor.py:1312
#: flatcamEditors/FlatCAMGrbEditor.py:5446 flatcamTools/ToolTransform.py:690
msgid "Applying Flip"
msgstr "Execuţie Oglindire"

#: flatcamEditors/FlatCAMGeoEditor.py:1342
#: flatcamEditors/FlatCAMGrbEditor.py:5485 flatcamTools/ToolTransform.py:732
msgid "[success] Flip on the Y axis done ..."
msgstr "Oglindirea pe axa X efectuata ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1345
#: flatcamEditors/FlatCAMGrbEditor.py:5493 flatcamTools/ToolTransform.py:741
msgid "[success] Flip on the X axis done ..."
msgstr "Oglindirea pe axa Y efectuata ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1364
#: flatcamEditors/FlatCAMGrbEditor.py:5513
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to shear/skew!"
msgstr ""
"[WARNING_NOTCL] Nici-o forma nu este selectată. Selectează o forma pentru a "
"putea face Deformare!"

#: flatcamEditors/FlatCAMGeoEditor.py:1367
#: flatcamEditors/FlatCAMGrbEditor.py:5516 flatcamTools/ToolTransform.py:759
msgid "Applying Skew"
msgstr "Execuţie Deformare"

#: flatcamEditors/FlatCAMGeoEditor.py:1392
#: flatcamEditors/FlatCAMGrbEditor.py:5551 flatcamTools/ToolTransform.py:790
#, python-format
msgid "[success] Skew on the %s axis done ..."
msgstr "[success] Deformarea pe axa %s executată ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1396
#: flatcamEditors/FlatCAMGrbEditor.py:5555 flatcamTools/ToolTransform.py:794
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Skew action was not executed."
msgstr "[ERROR_NOTCL] Datorită erorii: %s, Deformarea a fost anulată."

#: flatcamEditors/FlatCAMGeoEditor.py:1407
#: flatcamEditors/FlatCAMGrbEditor.py:5574
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to scale!"
msgstr ""
"[WARNING_NOTCL] Nici-o forma nu este selectată. Selectează o forma pentru a "
"putea face Scalare!"

#: flatcamEditors/FlatCAMGeoEditor.py:1410
#: flatcamEditors/FlatCAMGrbEditor.py:5577 flatcamTools/ToolTransform.py:808
msgid "Applying Scale"
msgstr "Execuţie Scalare"

#: flatcamEditors/FlatCAMGeoEditor.py:1443
#: flatcamEditors/FlatCAMGrbEditor.py:5615 flatcamTools/ToolTransform.py:847
#, python-format
msgid "[success] Scale on the %s axis done ..."
msgstr "[success] Scalarea pe axa %s executată ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1446
#: flatcamEditors/FlatCAMGrbEditor.py:5618 flatcamTools/ToolTransform.py:850
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Scale action was not executed."
msgstr "[ERROR_NOTCL] Datorită erorii: %s, Scalarea a fost anulată ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1455
#: flatcamEditors/FlatCAMGrbEditor.py:5631
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to offset!"
msgstr ""
"[WARNING_NOTCL] Nici-o forma nu este selectată. Selectează o forma pentru a "
"putea face Ofset!"

#: flatcamEditors/FlatCAMGeoEditor.py:1458
#: flatcamEditors/FlatCAMGrbEditor.py:5634 flatcamTools/ToolTransform.py:860
msgid "Applying Offset"
msgstr "Execuţie Ofset"

#: flatcamEditors/FlatCAMGeoEditor.py:1469
#: flatcamEditors/FlatCAMGrbEditor.py:5656 flatcamTools/ToolTransform.py:879
#, python-format
msgid "[success] Offset on the %s axis done ..."
msgstr "[success] Deplasarea pe axa %s executată ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1473
#: flatcamEditors/FlatCAMGrbEditor.py:5660 flatcamTools/ToolTransform.py:883
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Offset action was not executed."
msgstr "[ERROR_NOTCL] Datorită erorii: %s, Deplasarea a fost anulată."

#: flatcamEditors/FlatCAMGeoEditor.py:1477
#: flatcamEditors/FlatCAMGrbEditor.py:5664
msgid "Rotate ..."
msgstr "Rotaţie ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1478
#: flatcamEditors/FlatCAMGeoEditor.py:1535
#: flatcamEditors/FlatCAMGeoEditor.py:1552
#: flatcamEditors/FlatCAMGrbEditor.py:5665
#: flatcamEditors/FlatCAMGrbEditor.py:5722
#: flatcamEditors/FlatCAMGrbEditor.py:5739
msgid "Enter an Angle Value (degrees):"
msgstr "Introdu o valoare in grade pt Unghi:"

#: flatcamEditors/FlatCAMGeoEditor.py:1487
#: flatcamEditors/FlatCAMGrbEditor.py:5674
msgid "[success] Geometry shape rotate done..."
msgstr "[success] Rotatia formei geometrice executată ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1492
#: flatcamEditors/FlatCAMGrbEditor.py:5679
msgid "[WARNING_NOTCL] Geometry shape rotate cancelled..."
msgstr "[WARNING_NOTCL] Rotatia formei geometrice anulată ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1498
#: flatcamEditors/FlatCAMGrbEditor.py:5685
msgid "Offset on X axis ..."
msgstr "Ofset pe axa X ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1499
#: flatcamEditors/FlatCAMGeoEditor.py:1518
#: flatcamEditors/FlatCAMGrbEditor.py:5686
#: flatcamEditors/FlatCAMGrbEditor.py:5705
#, python-format
msgid "Enter a distance Value (%s):"
msgstr "Introdu of valoare pt Distanta (%s):"

#: flatcamEditors/FlatCAMGeoEditor.py:1508
#: flatcamEditors/FlatCAMGrbEditor.py:5695
msgid "[success] Geometry shape offset on X axis done..."
msgstr "[success] Deplasarea formei geometrice pe axa X executată ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1512
#: flatcamEditors/FlatCAMGrbEditor.py:5699
msgid "[WARNING_NOTCL] Geometry shape offset X cancelled..."
msgstr "[WARNING_NOTCL] Deplasarea formei geometrice pe axa X anulată ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1517
#: flatcamEditors/FlatCAMGrbEditor.py:5704
msgid "Offset on Y axis ..."
msgstr "Ofset pe axa Y ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1527
#: flatcamEditors/FlatCAMGrbEditor.py:5714
msgid "[success] Geometry shape offset on Y axis done..."
msgstr "[success] Deplasarea formei geometrice pe axa Y executată ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1531
#: flatcamEditors/FlatCAMGrbEditor.py:5718
msgid "[WARNING_NOTCL] Geometry shape offset Y cancelled..."
msgstr "[WARNING_NOTCL] Deplasarea formei geometrice pe axa Y anulată ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1534
#: flatcamEditors/FlatCAMGrbEditor.py:5721
msgid "Skew on X axis ..."
msgstr "Deformare pe axa X ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1544
#: flatcamEditors/FlatCAMGrbEditor.py:5731
msgid "[success] Geometry shape skew on X axis done..."
msgstr "[success] Deformarea formei geometrice pe axa X executată ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1548
#: flatcamEditors/FlatCAMGrbEditor.py:5735
msgid "[WARNING_NOTCL] Geometry shape skew X cancelled..."
msgstr "[WARNING_NOTCL] Deformarea formei geometrice pe axa X anulată ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1551
#: flatcamEditors/FlatCAMGrbEditor.py:5738
msgid "Skew on Y axis ..."
msgstr "Deformare pe axa Y ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1561
#: flatcamEditors/FlatCAMGrbEditor.py:5748
msgid "[success] Geometry shape skew on Y axis done..."
msgstr "[success] Deformarea formei geometrice pe axa Y executată ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1565
#: flatcamEditors/FlatCAMGrbEditor.py:5752
msgid "[WARNING_NOTCL] Geometry shape skew Y cancelled..."
msgstr "[success] Deformarea formei geometrice pe axa Y executată ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1929
#: flatcamEditors/FlatCAMGeoEditor.py:1980
#: flatcamEditors/FlatCAMGrbEditor.py:1361
#: flatcamEditors/FlatCAMGrbEditor.py:1430
msgid "Click on Center point ..."
msgstr "Click pe punctul de Centru ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1936
#: flatcamEditors/FlatCAMGrbEditor.py:1369
msgid "Click on Perimeter point to complete ..."
msgstr "Click pe un punct aflat pe Circumferintă pentru terminare ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1965
msgid "[success] Done. Adding Circle completed."
msgstr "[success] Executat. Adăugarea unei forme Cerc terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2000
#: flatcamEditors/FlatCAMGrbEditor.py:1462
msgid "Click on Start point ..."
msgstr "Click pe punctul de Start ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2002
#: flatcamEditors/FlatCAMGrbEditor.py:1464
msgid "Click on Point3 ..."
msgstr "Click pe Punctul3 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2004
#: flatcamEditors/FlatCAMGrbEditor.py:1466
msgid "Click on Stop point ..."
msgstr "Click pe punctulde Stop ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2009
#: flatcamEditors/FlatCAMGrbEditor.py:1471
msgid "Click on Stop point to complete ..."
msgstr "Click pe punctul de Stop pentru terminare ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2011
#: flatcamEditors/FlatCAMGrbEditor.py:1473
msgid "Click on Point2 to complete ..."
msgstr "Click pe Punctul2 pentru terminare ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2013
#: flatcamEditors/FlatCAMGrbEditor.py:1475
msgid "Click on Center point to complete ..."
msgstr "Click pe punctul de Centru pentru terminare ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2025
#: flatcamEditors/FlatCAMGrbEditor.py:1487
#, python-format
msgid "Direction: %s"
msgstr "Direcţie: %s"

#: flatcamEditors/FlatCAMGeoEditor.py:2035
#: flatcamEditors/FlatCAMGrbEditor.py:1497
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr "Mod: Start -> Stop -> Centru. Click pe punctul de Start ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2038
#: flatcamEditors/FlatCAMGrbEditor.py:1500
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr "Mod: Point1 -> Point3 -> Point2. Click pe Punctul1 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2041
#: flatcamEditors/FlatCAMGrbEditor.py:1503
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr "Mod: Center -> Start -> Stop. Click pe punctul de Centru ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2179
msgid "[success] Done. Arc completed."
msgstr "[success] Executat. Adăugarea unei forme Arc terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2198
#: flatcamEditors/FlatCAMGeoEditor.py:2251
#: flatcamEditors/FlatCAMGeoEditor.py:2626
msgid "Click on 1st corner ..."
msgstr "Click pe primul colt ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2204
msgid "Click on opposite corner to complete ..."
msgstr "Click pe punctul opus pentru terminare ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2232
msgid "[success] Done. Rectangle completed."
msgstr "[success] Executat. Rotaţie finalizata."

#: flatcamEditors/FlatCAMGeoEditor.py:2258
msgid "Click on next Point or click right mouse button to complete ..."
msgstr ""
"Click pe punctul următor sau click buton dreapta al mousului pentru "
"terminare ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2286
msgid "[success] Done. Polygon completed."
msgstr "[success] Executat. Adăugarea unei forme Poligon terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2296
#: flatcamEditors/FlatCAMGeoEditor.py:2342
#: flatcamEditors/FlatCAMGrbEditor.py:1058
#: flatcamEditors/FlatCAMGrbEditor.py:1252
msgid "Backtracked one point ..."
msgstr "Revenit la penultimul Punct ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2324
msgid "[success] Done. Path completed."
msgstr "[success] Executata. Adăugarea unei forme tip Cale terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2447
msgid "[WARNING_NOTCL] MOVE: No shape selected. Select a shape to move ..."
msgstr ""
"[WARNING_NOTCL] MUTARE: Nici-o forma nu este selectată. Selectează o forma "
"pentru a putea face deplasare!"

#: flatcamEditors/FlatCAMGeoEditor.py:2449
#: flatcamEditors/FlatCAMGeoEditor.py:2461
msgid " MOVE: Click on reference point ..."
msgstr "MUTARE: Click pe punctul de referinţă ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2452
msgid " Click on destination point ..."
msgstr " Click pe punctul de Destinaţie ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2486
msgid "[success] Done. Geometry(s) Move completed."
msgstr "[success] Executat. Mutarea Geometriilor terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2606
msgid "[success] Done. Geometry(s) Copy completed."
msgstr "[success] Executat. Copierea Geometriilor terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2640
#, python-format
msgid ""
"[ERROR]Font not supported. Only Regular, Bold, Italic and BoldItalic are "
"supported. Error: %s"
msgstr ""
"[ERROR] Fontul nu este compatibil. Doar cele tip: Regular, Bold, Italic și "
"BoldItalic sunt acceptate. Eroarea:: %s"

#: flatcamEditors/FlatCAMGeoEditor.py:2650
msgid "[success] Done. Adding Text completed."
msgstr "[success] Executat. Adăugarea de Text terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2678
msgid "Create buffer geometry ..."
msgstr "Crează o geometrie de tipe Bufer ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2689
#: flatcamEditors/FlatCAMGeoEditor.py:2715
#: flatcamEditors/FlatCAMGeoEditor.py:2741
msgid "[WARNING_NOTCL] Buffer cancelled. No shape selected."
msgstr ""
"[WARNING_NOTCL] Crearea de geometrie Bufer anulată. Nici-o forma geometrică "
"nu este selectată."

#: flatcamEditors/FlatCAMGeoEditor.py:2711
#: flatcamEditors/FlatCAMGrbEditor.py:4558
msgid "[success] Done. Buffer Tool completed."
msgstr "[success] Executat. Unealta Bufer terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2737
msgid "[success] Done. Buffer Int Tool completed."
msgstr "[success] Executat. Unealta Bufer Intern terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2763
msgid "[success] Done. Buffer Ext Tool completed."
msgstr "[success] Executat. Unealta Bufer Extern terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2798
#: flatcamEditors/FlatCAMGrbEditor.py:2025
msgid "Select a shape to act as deletion area ..."
msgstr "Selectează o formă geometrică ca formă de stergere ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2800
#: flatcamEditors/FlatCAMGeoEditor.py:2819
#: flatcamEditors/FlatCAMGeoEditor.py:2825
#: flatcamEditors/FlatCAMGrbEditor.py:2027
msgid "Click to pick-up the erase shape..."
msgstr "Click pentru a activa forma de stergere..."

#: flatcamEditors/FlatCAMGeoEditor.py:2829
#: flatcamEditors/FlatCAMGrbEditor.py:2084
msgid "Click to erase ..."
msgstr "Click pt a sterge ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2858
#: flatcamEditors/FlatCAMGrbEditor.py:2117
msgid "[success] Done. Eraser tool action completed."
msgstr "[success] Executat. Unealta Stergere s-a terminat."

#: flatcamEditors/FlatCAMGeoEditor.py:2901
msgid "Create Paint geometry ..."
msgstr "Crează o geometrie Paint ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2915
#: flatcamEditors/FlatCAMGrbEditor.py:2259
msgid "Shape transformations ..."
msgstr "Transformări de forme geometrice ..."

#: flatcamEditors/FlatCAMGeoEditor.py:3419
#, python-brace-format
msgid ""
"[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: {dia}"
msgstr ""
"[WARNING_NOTCL] Se editeaza un obiect tip Geometrie MultiGeo , unealta: "
"{tool} cu diametrul: {dia}"

#: flatcamEditors/FlatCAMGeoEditor.py:3796
msgid "[WARNING_NOTCL] Copy cancelled. No shape selected."
msgstr ""
"[WARNING_NOTCL] Copiere anulată. Nici-o forma geometrică nu este selectată."

#: flatcamEditors/FlatCAMGeoEditor.py:3803 flatcamGUI/FlatCAMGUI.py:2757
#: flatcamGUI/FlatCAMGUI.py:2803 flatcamGUI/FlatCAMGUI.py:2821
#: flatcamGUI/FlatCAMGUI.py:2952 flatcamGUI/FlatCAMGUI.py:2964
#: flatcamGUI/FlatCAMGUI.py:2998
msgid "Click on target point."
msgstr "Click pe punctul tinta."

#: flatcamEditors/FlatCAMGeoEditor.py:4047
#: flatcamEditors/FlatCAMGeoEditor.py:4082
msgid ""
"[WARNING_NOTCL] A selection of at least 2 geo items is required to do "
"Intersection."
msgstr ""
"[WARNING_NOTCL] Cel puțin o selecţie de doua forme geometrice este necesară "
"pentru a face o Intersecţie."

#: flatcamEditors/FlatCAMGeoEditor.py:4166
#: flatcamEditors/FlatCAMGeoEditor.py:4204
#: flatcamEditors/FlatCAMGeoEditor.py:4280
msgid ""
"[ERROR_NOTCL] Negative buffer value is not accepted. Use Buffer interior to "
"generate an 'inside' shape"
msgstr ""
"[ERROR_NOTCL] O valoare de bufer negativă nu se acceptă. Folosete Bufer "
"Interior pentru a genera o forma geo. interioara."

#: flatcamEditors/FlatCAMGeoEditor.py:4175
#: flatcamEditors/FlatCAMGeoEditor.py:4213
#: flatcamEditors/FlatCAMGeoEditor.py:4288
msgid "[WARNING_NOTCL] Nothing selected for buffering."
msgstr ""
"[WARNING_NOTCL] Nici-o forma geometrică nu este selectată pentru a face "
"Bufer."

#: flatcamEditors/FlatCAMGeoEditor.py:4179
#: flatcamEditors/FlatCAMGeoEditor.py:4217
#: flatcamEditors/FlatCAMGeoEditor.py:4292
msgid "[WARNING_NOTCL] Invalid distance for buffering."
msgstr "[WARNING_NOTCL] Distanta invalida pentru a face Bufer."

#: flatcamEditors/FlatCAMGeoEditor.py:4189
#: flatcamEditors/FlatCAMGeoEditor.py:4301
msgid ""
"[ERROR_NOTCL] Failed, the result is empty. Choose a different buffer value."
msgstr ""
"[ERROR_NOTCL] Eșuat, rezultatul este gol. Foloseşte o valoare diferita "
"pentru Bufer."

#: flatcamEditors/FlatCAMGeoEditor.py:4197
msgid "[success] Full buffer geometry created."
msgstr "[success] Geometrie tip Bufer Complet creată."

#: flatcamEditors/FlatCAMGeoEditor.py:4227
msgid ""
"[ERROR_NOTCL] Failed, the result is empty. Choose a smaller buffer value."
msgstr ""
"[ERROR_NOTCL] Eșuat, rezultatul este gol. Foloseşte of valoare mai mica pt. "
"Bufer."

#: flatcamEditors/FlatCAMGeoEditor.py:4242
msgid "[success] Interior buffer geometry created."
msgstr "[success] Geometrie Bufer interior creată."

#: flatcamEditors/FlatCAMGeoEditor.py:4313
msgid "[success] Exterior buffer geometry created."
msgstr "[success] Geometrie Bufer Exterior creată."

#: flatcamEditors/FlatCAMGeoEditor.py:4377
msgid "[WARNING_NOTCL] Nothing selected for painting."
msgstr ""
"[WARNING_NOTCL] Nici-o forma geometrică nu este selectată pentru Paint."

#: flatcamEditors/FlatCAMGeoEditor.py:4383
msgid "[WARNING] Invalid value for {}"
msgstr "[WARNING] Valoare invalida pentru {}"

#: flatcamEditors/FlatCAMGeoEditor.py:4389
msgid ""
"[ERROR_NOTCL] Could not do Paint. Overlap value has to be less than 1.00 "
"(100%)."
msgstr ""
"[ERROR_NOTCL] Nu se poate face Paint. Valoarea de suprapunere trebuie să fie "
"mai puțin de 1.00 (100%)."

#: flatcamEditors/FlatCAMGeoEditor.py:4448
#, python-format
msgid ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint\n"
"%s"
msgstr ""
"[ERROR] Nu se poate face Paint. Incearcă o combinaţie diferita de parametri. "
"Or o metoda diferita de Paint\n"
"%s"

#: flatcamEditors/FlatCAMGeoEditor.py:4459
msgid "[success] Paint done."
msgstr "[success] Paint executat."

#: flatcamEditors/FlatCAMGrbEditor.py:200
msgid "[WARNING_NOTCL] To add an Pad first select a aperture in Aperture Table"
msgstr ""
"[WARNING_NOTCL] Pentru a adăuga un Pad mai intai selectează o apertură "
"(unealtă) in Tabela de Aperturi"

#: flatcamEditors/FlatCAMGrbEditor.py:206
#: flatcamEditors/FlatCAMGrbEditor.py:398
msgid ""
"[WARNING_NOTCL] Aperture size is zero. It needs to be greater than zero."
msgstr ""
"[WARNING_NOTCL] Dimens. aperturii este zero. Trebuie sa fie mai mare ca zero."

#: flatcamEditors/FlatCAMGrbEditor.py:357
#: flatcamEditors/FlatCAMGrbEditor.py:662
msgid ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""
"Tip de apertură incompatibil. Selectează o apertură cu tipul 'C', 'R' sau "
"'O'."

#: flatcamEditors/FlatCAMGrbEditor.py:369
msgid "[success] Done. Adding Pad completed."
msgstr "[success] Executat. Adăugarea padului terminată."

#: flatcamEditors/FlatCAMGrbEditor.py:391
msgid ""
"[WARNING_NOTCL] To add an Pad Array first select a aperture in Aperture Table"
msgstr ""
"[WARNING_NOTCL] Pentru a adăuga o arie de paduri mai intai selectează o "
"apertura (unealtă) in Tabela de Aperturi"

#: flatcamEditors/FlatCAMGrbEditor.py:468
msgid "Click on the Pad Circular Array Start position"
msgstr "Click pe punctul de Start al ariei de paduri"

#: flatcamEditors/FlatCAMGrbEditor.py:497
msgid "[ERROR_NOTCL] The value is mistyped. Check the value."
msgstr "[ERROR_NOTCL] Valoarea este gresita. Verifică ce ai introdus."

#: flatcamEditors/FlatCAMGrbEditor.py:687
msgid "[WARNING_NOTCL] Too many Pads for the selected spacing angle."
msgstr "[WARNING_NOTCL] Prea multe paduri pentru unghiul selectat."

#: flatcamEditors/FlatCAMGrbEditor.py:709
msgid "[success] Done. Pad Array added."
msgstr "[success] Executat. Aria de paduri a fost adăugată."

#: flatcamEditors/FlatCAMGrbEditor.py:730
msgid "Select shape(s) and then click ..."
msgstr "Selectează formele si apoi click ..."

#: flatcamEditors/FlatCAMGrbEditor.py:741
msgid "[ERROR_NOTCL] Failed. Nothing selected."
msgstr "[ERROR_NOTCL] Eșuat. Nu este nimic selectat."

#: flatcamEditors/FlatCAMGrbEditor.py:756
msgid ""
"[WARNING_NOTCL] Failed. Poligonize works only on geometries belonging to the "
"same aperture."
msgstr ""
"[WARNING_NOTCL] Esuat. Poligonizarea lucrează doar asupra geometriilor care "
"apartin aceleasi aperturi."

#: flatcamEditors/FlatCAMGrbEditor.py:809
msgid "[success] Done. Poligonize completed."
msgstr "[success] Executat. Poligonizare completă."

#: flatcamEditors/FlatCAMGrbEditor.py:860
#: flatcamEditors/FlatCAMGrbEditor.py:1075
#: flatcamEditors/FlatCAMGrbEditor.py:1099
msgid "Corner Mode 1: 45 degrees ..."
msgstr "Mod Colt 1: 45 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:862
msgid "Click on 1st point ..."
msgstr "Click pe primul punct ..."

#: flatcamEditors/FlatCAMGrbEditor.py:872
#: flatcamEditors/FlatCAMGrbEditor.py:1170
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr ""
"Click pe punctul următor sau click buton dreapta al mousului pentru "
"terminare ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1063
#: flatcamEditors/FlatCAMGrbEditor.py:1096
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr "Mod Colt 2: Invers 45 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1066
#: flatcamEditors/FlatCAMGrbEditor.py:1093
msgid "Corner Mode 3: 90 degrees ..."
msgstr "Mod Colt 3: 90 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1069
#: flatcamEditors/FlatCAMGrbEditor.py:1090
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr "Mod Colt 4: Invers 90 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1072
#: flatcamEditors/FlatCAMGrbEditor.py:1087
msgid "Corner Mode 5: Free angle ..."
msgstr "Mod Colt 5: Unghi liber ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1126
#: flatcamEditors/FlatCAMGrbEditor.py:1284
#: flatcamEditors/FlatCAMGrbEditor.py:1323
msgid "Track Mode 1: 45 degrees ..."
msgstr "Mod Traseu 1: 45 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1264
#: flatcamEditors/FlatCAMGrbEditor.py:1318
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr "Mod Traseu 2: Invers 45 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1269
#: flatcamEditors/FlatCAMGrbEditor.py:1313
msgid "Track Mode 3: 90 degrees ..."
msgstr "Mod Traseu 3: 90 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1274
#: flatcamEditors/FlatCAMGrbEditor.py:1308
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr "Mod Traseu 4: Invers 90 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1279
#: flatcamEditors/FlatCAMGrbEditor.py:1303
msgid "Track Mode 5: Free angle ..."
msgstr "Mod Traseu 5: Unghi liber ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1683
msgid "Scale the selected Gerber apertures ..."
msgstr "Șterge aperturile Gerber selectate ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1725
msgid "Buffer the selected apertures ..."
msgstr "Bufereaza aperturile selectate."

#: flatcamEditors/FlatCAMGrbEditor.py:1767
msgid "Mark polygon areas in the edited Gerber ..."
msgstr "Marchează ariile poligonale in obiectul Gerber editat ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1811
msgid "[WARNING_NOTCL] Nothing selected to move ..."
msgstr "[WARNING_NOTCL] Nimic nu este selectat pentru mutare ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1934
msgid "[success] Done. Apertures Move completed."
msgstr "[success] Executat. Mutarea Aperturilor terminată."

#: flatcamEditors/FlatCAMGrbEditor.py:2010
msgid "[success] Done. Apertures copied."
msgstr "[success] Executat. Aperturile au fost copiate."

#: flatcamEditors/FlatCAMGrbEditor.py:2301 flatcamGUI/FlatCAMGUI.py:1623
#: flatcamGUI/FlatCAMGUI.py:4353
msgid "Gerber Editor"
msgstr "Editor Gerber"

#: flatcamEditors/FlatCAMGrbEditor.py:2321 flatcamGUI/ObjectUI.py:192
msgid "<b>Apertures:</b>"
msgstr "<b>Aperturi:</b>"

#: flatcamEditors/FlatCAMGrbEditor.py:2323 flatcamGUI/ObjectUI.py:194
msgid "Apertures Table for the Gerber Object."
msgstr "Tabela de aperturi pt obiectul Gerber."

#: flatcamEditors/FlatCAMGrbEditor.py:2334
#: flatcamEditors/FlatCAMGrbEditor.py:3712 flatcamGUI/ObjectUI.py:227
msgid "Code"
msgstr "Cod"

#: flatcamEditors/FlatCAMGrbEditor.py:2334
#: flatcamEditors/FlatCAMGrbEditor.py:3712 flatcamGUI/ObjectUI.py:227
#: flatcamGUI/ObjectUI.py:888 flatcamGUI/ObjectUI.py:1462
msgid "Type"
msgstr "Tip"

#: flatcamEditors/FlatCAMGrbEditor.py:2334
#: flatcamEditors/FlatCAMGrbEditor.py:3712 flatcamGUI/ObjectUI.py:227
msgid "Size"
msgstr "Dimens."

#: flatcamEditors/FlatCAMGrbEditor.py:2334
#: flatcamEditors/FlatCAMGrbEditor.py:3712 flatcamGUI/ObjectUI.py:227
msgid "Dim"
msgstr "Dim"

#: flatcamEditors/FlatCAMGrbEditor.py:2338 flatcamGUI/ObjectUI.py:231
msgid "Index"
msgstr "Index"

#: flatcamEditors/FlatCAMGrbEditor.py:2340 flatcamGUI/ObjectUI.py:233
msgid "Aperture Code"
msgstr "Cod"

#: flatcamEditors/FlatCAMGrbEditor.py:2342 flatcamGUI/ObjectUI.py:235
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr ""
"Tipul aperturilor:\n"
"- circular\n"
"- patrulater\n"
"- macro-uri\n"
"etc"

#: flatcamEditors/FlatCAMGrbEditor.py:2344
#: flatcamEditors/FlatCAMGrbEditor.py:2377 flatcamGUI/ObjectUI.py:237
msgid "Aperture Size:"
msgstr "Dim. aper."

#: flatcamEditors/FlatCAMGrbEditor.py:2346 flatcamGUI/ObjectUI.py:239
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""
"Dimensiunile aperturilor:\n"
"- (latime, inaltime) pt tipurile R, O.\n"
"- (diametru, nVertices) pt tipul P"

#: flatcamEditors/FlatCAMGrbEditor.py:2367
msgid "Aperture Code:"
msgstr "Cod apertură"

#: flatcamEditors/FlatCAMGrbEditor.py:2369
msgid "Code for the new aperture"
msgstr "Diametru pentru noua apertură"

#: flatcamEditors/FlatCAMGrbEditor.py:2379
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""
"Dimensiunea pt noua apertură.\n"
"Dacă tipul aperturii este 'R' sau 'O'\n"
"valoarea este calculată automat prin:\n"
"sqrt(lătime**2 + inăltime**2)"

#: flatcamEditors/FlatCAMGrbEditor.py:2391
msgid "Aperture Type:"
msgstr "Tip aper."

#: flatcamEditors/FlatCAMGrbEditor.py:2393
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""
"Selectează noul tip de apertură. Poate fi:\n"
"C = circular\n"
"R = rectangular\n"
"O = oval"

#: flatcamEditors/FlatCAMGrbEditor.py:2404
msgid "Aperture Dim:"
msgstr "Dim. aper."

#: flatcamEditors/FlatCAMGrbEditor.py:2406
msgid ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"
msgstr ""
"Dimensiunile pentru noua apertură.\n"
"Activă doar pentru aperturile rectangulare (tip 'R').\n"
"Formatul este (lătime, inăltime)"

#: flatcamEditors/FlatCAMGrbEditor.py:2415
msgid "Add/Delete Aperture:"
msgstr "Adaugă/Șterge aper."

#: flatcamEditors/FlatCAMGrbEditor.py:2417
msgid "Add/Delete an aperture in the aperture table"
msgstr "Adaugă/Șterge o apertură din lista de aperturi."

#: flatcamEditors/FlatCAMGrbEditor.py:2426
msgid "Add a new aperture to the aperture list."
msgstr "Adaugă o nouă apertură in lista de aperturi."

#: flatcamEditors/FlatCAMGrbEditor.py:2431
msgid "Delete a aperture in the aperture list"
msgstr "Șterge o apertură din lista de aperturi."

#: flatcamEditors/FlatCAMGrbEditor.py:2448
msgid "Buffer Aperture:"
msgstr "Bufer pt apertură:"

#: flatcamEditors/FlatCAMGrbEditor.py:2450
msgid "Buffer a aperture in the aperture list"
msgstr "Fă bufer pt o apertură din lista de aperturi"

#: flatcamEditors/FlatCAMGrbEditor.py:2463
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"Sunt disponibile 3 tipuri de colțuri:\n"
" - 'Rotund': coltul este rotunjit.\n"
" - 'Patrat:' colțurile formează unghi de 90 grade.\n"
" - 'Beveled:' coltul este inlocuit cu o linie care uneste capetele liniilor "
"care formează coltul"

#: flatcamEditors/FlatCAMGrbEditor.py:2478 flatcamGUI/FlatCAMGUI.py:721
#: flatcamGUI/FlatCAMGUI.py:1965
msgid "Buffer"
msgstr "Bufer"

#: flatcamEditors/FlatCAMGrbEditor.py:2493
msgid "Scale Aperture:"
msgstr "Scalează ap.:"

#: flatcamEditors/FlatCAMGrbEditor.py:2495
msgid "Scale a aperture in the aperture list"
msgstr "Scalează o apertură in lista de aperturi"

#: flatcamEditors/FlatCAMGrbEditor.py:2503
msgid "Scale factor:"
msgstr "Factor Scalare:"

#: flatcamEditors/FlatCAMGrbEditor.py:2505
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""
"Factorul cu care se va face scalarea aperturii selectate.\n"
"Poate lua valori intre: 0.000 si 999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2531
msgid "Mark polygon areas:"
msgstr "Marchează ariile poligonale:"

#: flatcamEditors/FlatCAMGrbEditor.py:2533
msgid "Mark the polygon areas."
msgstr "Marchează ariile poligonale."

#: flatcamEditors/FlatCAMGrbEditor.py:2541
msgid "Area UPPER threshold:"
msgstr "Pragul de sus pt. arie:"

#: flatcamEditors/FlatCAMGrbEditor.py:2543
msgid ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"Valoare de prag, toate poligoanele cu arii mai mici vor fi marcate.\n"
"Poate lua valori intre: 0.000 si 999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2549
msgid "Area LOWER threshold:"
msgstr "Pragul de jos pt. arie:"

#: flatcamEditors/FlatCAMGrbEditor.py:2551
msgid ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"Valoare de prag, toate poligoanele cu arii mai mari vor fi marcate.\n"
"Poate lua valori intre: 0.000 si 999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2564
msgid "Go"
msgstr "Execută!"

#: flatcamEditors/FlatCAMGrbEditor.py:2584 flatcamGUI/FlatCAMGUI.py:711
#: flatcamGUI/FlatCAMGUI.py:1955
msgid "Add Pad Array"
msgstr "Adaugă o arie de paduri"

#: flatcamEditors/FlatCAMGrbEditor.py:2586
msgid "Add an array of pads (linear or circular array)"
msgstr "Adaugă o arie de paduri (arie lineara sau circulara)."

#: flatcamEditors/FlatCAMGrbEditor.py:2592
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Selectează tipul de arii de paduri.\n"
"Poate fi Liniar X(Y) sau Circular."

#: flatcamEditors/FlatCAMGrbEditor.py:2603
msgid "Nr of pads:"
msgstr "Nr. paduri:"

#: flatcamEditors/FlatCAMGrbEditor.py:2605
msgid "Specify how many pads to be in the array."
msgstr "Specifica cate paduri să fie incluse in arie."

#: flatcamEditors/FlatCAMGrbEditor.py:3093
#: flatcamEditors/FlatCAMGrbEditor.py:3097
msgid ""
"[WARNING_NOTCL] Aperture code value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Valoarea codului aperturii lipseste sau este in format "
"greșit. Adaugă din nou și reîncearcă."

#: flatcamEditors/FlatCAMGrbEditor.py:3133
msgid ""
"[WARNING_NOTCL] Aperture dimensions value is missing or wrong format. Add it "
"in format (width, height) and retry."
msgstr ""
"[WARNING_NOTCL] Dimensiunile aperturii lipsesc sau sunt intr-un format "
"greșit. Adaugă din nou și reîncearcă."

#: flatcamEditors/FlatCAMGrbEditor.py:3145
msgid ""
"[WARNING_NOTCL] Aperture size value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Valoarea mărimii aperturii lipseste sau este in format "
"greșit. Adaugă din nou și reîncearcă."

#: flatcamEditors/FlatCAMGrbEditor.py:3156
msgid "[WARNING_NOTCL] Aperture already in the aperture table."
msgstr "[WARNING_NOTCL] Apertura este deja in lista de aperturi."

#: flatcamEditors/FlatCAMGrbEditor.py:3163
#, python-brace-format
msgid "[success] Added new aperture with code: {apid}"
msgstr "[success] O nouă apertură este adăugată cu codul: {apid}"

#: flatcamEditors/FlatCAMGrbEditor.py:3191
msgid "[WARNING_NOTCL] Select an aperture in Aperture Table"
msgstr "[WARNING_NOTCL] Selectează o unealtă in Tabela de Aperturi"

#: flatcamEditors/FlatCAMGrbEditor.py:3197
#, python-format
msgid "[WARNING_NOTCL] Select an aperture in Aperture Table --> %s"
msgstr "[WARNING_NOTCL] Selectează o unealtă in Tabela de Aperturi --> %s"

#: flatcamEditors/FlatCAMGrbEditor.py:3220
#, python-brace-format
msgid "[success] Deleted aperture with code: {del_dia}"
msgstr "[success] Unealta cu diametrul: {del_dia} a fost stearsă"

#: flatcamEditors/FlatCAMGrbEditor.py:3641
#, python-format
msgid "Adding aperture: %s geo ..."
msgstr "Se adaugă apertura: %s geo ..."

#: flatcamEditors/FlatCAMGrbEditor.py:3829
msgid ""
"[ERROR_NOTCL] There are no Aperture definitions in the file. Aborting Gerber "
"creation."
msgstr ""
"[ERROR_NOTCL] Nu există definitii de aperturi in fişier. Se anulează crearea "
"de obiect Gerber."

#: flatcamEditors/FlatCAMGrbEditor.py:3832
msgid "[ERROR] An internal error has occurred. See shell.\n"
msgstr ""
"[ERROR] A apărut o eroare internă. Verifică in TCL Shell pt mai multe "
"detalii.\n"

#: flatcamEditors/FlatCAMGrbEditor.py:3837
msgid "Creating Gerber."
msgstr "Gerber in curs de creare."

#: flatcamEditors/FlatCAMGrbEditor.py:3845
msgid "[success] Gerber editing finished."
msgstr "[success] Editarea Gerber a fost terminată."

#: flatcamEditors/FlatCAMGrbEditor.py:3861
msgid "[WARNING_NOTCL] Cancelled. No aperture is selected"
msgstr "[WARNING_NOTCL] Anulat. Nici-o apertură nu este selectată."

#: flatcamEditors/FlatCAMGrbEditor.py:4391
msgid "[ERROR_NOTCL] Failed. No aperture geometry is selected."
msgstr ""
"[WARNING_NOTCL] Anulat. Nici-o geometrie de apertură nu este selectată."

#: flatcamEditors/FlatCAMGrbEditor.py:4399
msgid "[success] Done. Apertures geometry deleted."
msgstr "[success] Executat. Geometriile aperturilor au fost șterse."

#: flatcamEditors/FlatCAMGrbEditor.py:4542
msgid ""
"[WARNING_NOTCL] No aperture to buffer. Select at least one aperture and try "
"again."
msgstr ""
"[WARNING_NOTCL] Nici-o apertură sel. pt a face bufer. Selectează cel puțin o "
"apertură și încearcă din nou."

#: flatcamEditors/FlatCAMGrbEditor.py:4555
#, python-format
msgid ""
"[ERROR_NOTCL] Failed.\n"
"%s"
msgstr ""
"[ERROR_NOTCL] Actiune esuată.\n"
"%s"

#: flatcamEditors/FlatCAMGrbEditor.py:4572
msgid ""
"[WARNING_NOTCL] Scale factor value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Valoarea factorului de scalare lipseste sau este in format "
"gresit. Adaugă din nou și reîncearcă."

#: flatcamEditors/FlatCAMGrbEditor.py:4605
msgid ""
"[WARNING_NOTCL] No aperture to scale. Select at least one aperture and try "
"again."
msgstr ""
"[WARNING_NOTCL] Nici-o apertură sel. pt scalare. Selectează cel puțin o "
"apertură și încearcă din nou."

#: flatcamEditors/FlatCAMGrbEditor.py:4621
msgid "[success] Done. Scale Tool completed."
msgstr "[success] Executat. Unealta Scalare a terminat."

#: flatcamEditors/FlatCAMGrbEditor.py:4658
msgid "[success] Polygon areas marked."
msgstr "[success] Ariile poligonale sunt marcate."

#: flatcamEditors/FlatCAMGrbEditor.py:4660
msgid "[WARNING_NOTCL] There are no polygons to mark area."
msgstr "[WARNING_NOTCL] Nu există poligoane care sa fie marcate."

#: flatcamGUI/FlatCAMGUI.py:50
msgid "&File"
msgstr "&Fişiere"

#: flatcamGUI/FlatCAMGUI.py:55
msgid "&New Project ...\tCTRL+N"
msgstr "&Proiect Nou...\tCTRL+N"

#: flatcamGUI/FlatCAMGUI.py:57
msgid "Will create a new, blank project"
msgstr "Se va crea un proiect nou, fără continut"

#: flatcamGUI/FlatCAMGUI.py:62
msgid "&New"
msgstr "&Nou"

#: flatcamGUI/FlatCAMGUI.py:65
msgid "Geometry\tN"
msgstr "Geometrie\tN"

#: flatcamGUI/FlatCAMGUI.py:67
msgid "Will create a new, empty Geometry Object."
msgstr "Va crea un obiect nou de tip Geometrie, fără continut."

#: flatcamGUI/FlatCAMGUI.py:69
msgid "Gerber\tB"
msgstr "Gerber\tB"

#: flatcamGUI/FlatCAMGUI.py:71
msgid "Will create a new, empty Gerber Object."
msgstr "Va crea un obiect nou de tip Gerber, fără continut."

#: flatcamGUI/FlatCAMGUI.py:73
msgid "Excellon\tL"
msgstr "Excellon\tL"

#: flatcamGUI/FlatCAMGUI.py:75
msgid "Will create a new, empty Excellon Object."
msgstr "Va crea un obiect nou de tip Excellon, fără continut."

#: flatcamGUI/FlatCAMGUI.py:78 flatcamTools/ToolPcbWizard.py:62
#: flatcamTools/ToolPcbWizard.py:69
msgid "Open"
msgstr "Încarcă"

#: flatcamGUI/FlatCAMGUI.py:83
msgid "Open &Gerber ...\tCTRL+G"
msgstr "Încarcă &Gerber ...\tCTRL+G"

#: flatcamGUI/FlatCAMGUI.py:90
msgid "Open &Excellon ...\tCTRL+E"
msgstr "Încarcă  &Excellon ...\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:95
msgid "Open G-&Code ..."
msgstr "Încarcă G-&Code ..."

#: flatcamGUI/FlatCAMGUI.py:99
msgid "Open &Project ..."
msgstr "Încarcă &Project ..."

#: flatcamGUI/FlatCAMGUI.py:105
msgid "Open Config ..."
msgstr "Încarcă Config ..."

#: flatcamGUI/FlatCAMGUI.py:109
msgid "Recent files"
msgstr "Fişierele Recente"

#: flatcamGUI/FlatCAMGUI.py:115
msgid "Scripting"
msgstr "Scripting"

#: flatcamGUI/FlatCAMGUI.py:118
msgid "New Script ..."
msgstr "Script nou ..."

#: flatcamGUI/FlatCAMGUI.py:120
msgid "Open Script ..."
msgstr "Încarcă &Script..."

#: flatcamGUI/FlatCAMGUI.py:122
msgid "Run Script ...\tSHIFT+S"
msgstr "Rulează Script ...\tSHIFT+S"

#: flatcamGUI/FlatCAMGUI.py:125
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""
"Va rula un script TCL astfel oferind\n"
"o automatizare a anumitor functii\n"
"din FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:138
msgid "Import"
msgstr "Import"

#: flatcamGUI/FlatCAMGUI.py:140
msgid "&SVG as Geometry Object ..."
msgstr "&SVG ca și obiect Geometrie ..."

#: flatcamGUI/FlatCAMGUI.py:143
msgid "&SVG as Gerber Object ..."
msgstr "&SVG ca și obiect Gerber ..."

#: flatcamGUI/FlatCAMGUI.py:148
msgid "&DXF as Geometry Object ..."
msgstr "&DXF ca și obiect Geometrie ..."

#: flatcamGUI/FlatCAMGUI.py:151
msgid "&DXF as Gerber Object ..."
msgstr "&DXF ca și obiect Gerber ..."

#: flatcamGUI/FlatCAMGUI.py:156
msgid "Export"
msgstr "Export"

#: flatcamGUI/FlatCAMGUI.py:159
msgid "Export &SVG ..."
msgstr "Exporta &SVG ..."

#: flatcamGUI/FlatCAMGUI.py:162
msgid "Export DXF ..."
msgstr "Exporta DXF ..."

#: flatcamGUI/FlatCAMGUI.py:167
msgid "Export &PNG ..."
msgstr "Exporta &PNG ..."

#: flatcamGUI/FlatCAMGUI.py:169
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""
"Va exporta o imagine in format PNG,\n"
"imagina salvata va contine elementele vizuale\n"
"afisate in zona de afișare."

#: flatcamGUI/FlatCAMGUI.py:177
msgid "Export &Excellon ..."
msgstr "Exporta Excellon ..."

#: flatcamGUI/FlatCAMGUI.py:180
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""
"Va exporta un obiect Excellon intr-un fişier Excellon.\n"
"Formatul coordonatelor, unitatile de masura și tipul\n"
"de zerouri se vor seta in Preferințe -> Export Excellon."

#: flatcamGUI/FlatCAMGUI.py:186
msgid "Export &Gerber ..."
msgstr "Exporta &Gerber ..."

#: flatcamGUI/FlatCAMGUI.py:189
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""
"Va exporta un obiect Gerber intr-un fişier Gerber.\n"
"Formatul coordonatelor, unitatile de măsură și tipul\n"
"de zerouri se vor seta in Preferințe -> Export Gerber."

#: flatcamGUI/FlatCAMGUI.py:199
msgid "Save &Defaults"
msgstr "Salvează valori &Default"

#: flatcamGUI/FlatCAMGUI.py:205 flatcamGUI/FlatCAMGUI.py:532
msgid "Save"
msgstr "Salvează"

#: flatcamGUI/FlatCAMGUI.py:208
msgid "&Save Project ..."
msgstr "&Salvează Proiect ..."

#: flatcamGUI/FlatCAMGUI.py:213
msgid "Save Project &As ...\tCTRL+S"
msgstr "Salvează Proiect &ca ...\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:217
msgid "Save Project C&opy ..."
msgstr "Salvează o C&opie Proiect..."

#: flatcamGUI/FlatCAMGUI.py:225
msgid "E&xit"
msgstr "Iesire"

#: flatcamGUI/FlatCAMGUI.py:231
msgid "&Edit"
msgstr "&Editare"

#: flatcamGUI/FlatCAMGUI.py:234
msgid "Edit Object\tE"
msgstr "Editare Obiect\tE"

#: flatcamGUI/FlatCAMGUI.py:235
msgid "Close Editor\tCTRL+S"
msgstr "Salvează Editor\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:243
msgid "Conversion"
msgstr "Conversii"

#: flatcamGUI/FlatCAMGUI.py:245
msgid "&Join Geo/Gerber/Exc -> Geo"
msgstr "&Fuzionează Geo/Gerber/Exc -> Geo"

#: flatcamGUI/FlatCAMGUI.py:247
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""
"Fuzionează o selecţie de obiecte care pot fi de tipul:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometrie\n"
"intr-un nou obiect tip Geometrie >combo<."

#: flatcamGUI/FlatCAMGUI.py:254
msgid "Join Excellon(s) -> Excellon"
msgstr "Fuzionează Excellon(s) -> Excellon"

#: flatcamGUI/FlatCAMGUI.py:256
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""
"Fuzionează o selecţie de obiecte Excellon intr-un nou obiect Excellon >combo<"

#: flatcamGUI/FlatCAMGUI.py:259
msgid "Join Gerber(s) -> Gerber"
msgstr "Fuzionează Gerber(s) -> Gerber"

#: flatcamGUI/FlatCAMGUI.py:261
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr ""
"Fuzionează o selecţie de obiecte Gerber intr-un nou obiect Gerber >combo<"

#: flatcamGUI/FlatCAMGUI.py:266
msgid "Convert Single to MultiGeo"
msgstr "Converteste SingleGeo in MultiGeo"

#: flatcamGUI/FlatCAMGUI.py:268
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""
"Va converti un obiect Geometrie din tipul simpla geometrie (SingleGeo)\n"
"la tipul geometrie complexa (MultiGeo)."

#: flatcamGUI/FlatCAMGUI.py:272
msgid "Convert Multi to SingleGeo"
msgstr "Converteste MultiGeo in SingleGeo"

#: flatcamGUI/FlatCAMGUI.py:274
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""
"Va converti un obiect Geometrie din tipul geometrie complexa (MultiGeo)\n"
"la tipul geometrie simpla (SingleGeo)."

#: flatcamGUI/FlatCAMGUI.py:280
msgid "Convert Any to Geo"
msgstr "Converteste Oricare to Geo"

#: flatcamGUI/FlatCAMGUI.py:282
msgid "Convert Any to Gerber"
msgstr "Converteste Oricare in Gerber"

#: flatcamGUI/FlatCAMGUI.py:287
msgid "&Copy\tCTRL+C"
msgstr "&Copiază\tCTRL+C"

#: flatcamGUI/FlatCAMGUI.py:291
msgid "&Delete\tDEL"
msgstr "&Șterge\tDEL"

#: flatcamGUI/FlatCAMGUI.py:295
msgid "Se&t Origin\tO"
msgstr "Se&tează Originea\tO"

#: flatcamGUI/FlatCAMGUI.py:296
msgid "Jump to Location\tJ"
msgstr "Sari la Locaţie\tJ"

#: flatcamGUI/FlatCAMGUI.py:301
msgid "Toggle Units\tQ"
msgstr "Comută Unitati\tQ"

#: flatcamGUI/FlatCAMGUI.py:303
msgid "&Select All\tCTRL+A"
msgstr "&Selectează Tot\tCTRL+A"

#: flatcamGUI/FlatCAMGUI.py:307
msgid "&Preferences\tSHIFT+P"
msgstr "&Preferințe\tSHIFT+P"

#: flatcamGUI/FlatCAMGUI.py:310
msgid "&Options"
msgstr "&Opțiuni"

#: flatcamGUI/FlatCAMGUI.py:325
msgid "&Rotate Selection\tSHIFT+(R)"
msgstr "&Roteste Selectia\tSHIFT+(R)"

#: flatcamGUI/FlatCAMGUI.py:330
msgid "&Skew on X axis\tSHIFT+X"
msgstr "&Deformează pe axa X\tSHIFT+X"

#: flatcamGUI/FlatCAMGUI.py:332
msgid "S&kew on Y axis\tSHIFT+Y"
msgstr "Deformează pe axa Y\tSHIFT+Y"

#: flatcamGUI/FlatCAMGUI.py:337
msgid "Flip on &X axis\tX"
msgstr "Oglindește pe axa &X\tX"

#: flatcamGUI/FlatCAMGUI.py:339
msgid "Flip on &Y axis\tY"
msgstr "Oglindește pe axa &Y\tY"

#: flatcamGUI/FlatCAMGUI.py:344
msgid "View source\tALT+S"
msgstr "Vezi sursa\tALT+S"

#: flatcamGUI/FlatCAMGUI.py:349
msgid "&View"
msgstr "&Vizualizare"

#: flatcamGUI/FlatCAMGUI.py:350
msgid "Enable all plots\tALT+1"
msgstr "Activează toate afişările\tALT+1"

#: flatcamGUI/FlatCAMGUI.py:352
msgid "Disable all plots\tALT+2"
msgstr "Dezactivează toate afişările\tALT+2"

#: flatcamGUI/FlatCAMGUI.py:354
msgid "Disable non-selected\tALT+3"
msgstr "Dezactivează non-selectate\tALT+3"

#: flatcamGUI/FlatCAMGUI.py:357
msgid "&Zoom Fit\tV"
msgstr "&Mărește și potrivește\tV"

#: flatcamGUI/FlatCAMGUI.py:358
msgid "&Zoom In\t="
msgstr "&Măreste\t="

#: flatcamGUI/FlatCAMGUI.py:359
msgid "&Zoom Out\t-"
msgstr "&Micșorează\t-"

#: flatcamGUI/FlatCAMGUI.py:363
msgid "Toggle Code Editor\tCTRL+E"
msgstr "Comută Editorul de cod\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:366
msgid "&Toggle FullScreen\tALT+F10"
msgstr "Comută FullScreen\tALT+F10"

#: flatcamGUI/FlatCAMGUI.py:368
msgid "&Toggle Plot Area\tCTRL+F10"
msgstr "Comută Aria de Afișare\tCTRL+F10"

#: flatcamGUI/FlatCAMGUI.py:370
msgid "&Toggle Project/Sel/Tool\t`"
msgstr "Comută Proiect/Sel/Unealta\t`"

#: flatcamGUI/FlatCAMGUI.py:373
msgid "&Toggle Grid Snap\tG"
msgstr "Comută Grid\tG"

#: flatcamGUI/FlatCAMGUI.py:375
msgid "&Toggle Axis\tSHIFT+G"
msgstr "Comută Axe\tSHIFT+G"

#: flatcamGUI/FlatCAMGUI.py:378
msgid "Toggle Workspace\tSHIFT+W"
msgstr "Comută Suprafata de lucru\tSHIFT+W"

#: flatcamGUI/FlatCAMGUI.py:381
msgid "&Tool"
msgstr "Unelte"

#: flatcamGUI/FlatCAMGUI.py:383
msgid "&Command Line\tS"
msgstr "&Linie de comanda\tS"

#: flatcamGUI/FlatCAMGUI.py:386
msgid "&Help"
msgstr "Ajutor"

#: flatcamGUI/FlatCAMGUI.py:387
msgid "Help\tF1"
msgstr "Ajutor\tF1"

#: flatcamGUI/FlatCAMGUI.py:388
msgid "FlatCAM.org"
msgstr "FlatCAM.org"

#: flatcamGUI/FlatCAMGUI.py:391
msgid "Shortcuts List\tF3"
msgstr "Lista shortcut-uri\tF3"

#: flatcamGUI/FlatCAMGUI.py:392
msgid "YouTube Channel\tF4"
msgstr "YouTube \tF4"

#: flatcamGUI/FlatCAMGUI.py:394
msgid "About"
msgstr "Despre"

#: flatcamGUI/FlatCAMGUI.py:401
msgid "Add Circle\tO"
msgstr "Adaugă Cerc\tO"

#: flatcamGUI/FlatCAMGUI.py:403
msgid "Add Arc\tA"
msgstr "Adaugă Arc\tA"

#: flatcamGUI/FlatCAMGUI.py:406
msgid "Add Rectangle\tR"
msgstr "Adaugă Patrulater\tR"

#: flatcamGUI/FlatCAMGUI.py:409
msgid "Add Polygon\tN"
msgstr "Adaugă Poligon\tN"

#: flatcamGUI/FlatCAMGUI.py:411
msgid "Add Path\tP"
msgstr "Adaugă Cale\tP"

#: flatcamGUI/FlatCAMGUI.py:413
msgid "Add Text\tT"
msgstr "Adaugă Text\tT"

#: flatcamGUI/FlatCAMGUI.py:416
msgid "Polygon Union\tU"
msgstr "Uniune Poligoane\tU"

#: flatcamGUI/FlatCAMGUI.py:418
msgid "Polygon Intersection\tE"
msgstr "Intersecţie Poligoane\tE"

#: flatcamGUI/FlatCAMGUI.py:420
msgid "Polygon Subtraction\tS"
msgstr "Substracţie Poligoane\tS"

#: flatcamGUI/FlatCAMGUI.py:424
msgid "Cut Path\tX"
msgstr "Tăiere Cale\tX"

#: flatcamGUI/FlatCAMGUI.py:426
msgid "Copy Geom\tC"
msgstr "Copiază Geo\tC"

#: flatcamGUI/FlatCAMGUI.py:428
msgid "Delete Shape\tDEL"
msgstr "Șterge forma Geo.\tDEL"

#: flatcamGUI/FlatCAMGUI.py:431 flatcamGUI/FlatCAMGUI.py:507
msgid "Move\tM"
msgstr "Muta\tM"

#: flatcamGUI/FlatCAMGUI.py:433
msgid "Buffer Tool\tB"
msgstr "Unealta Bufer\tB"

#: flatcamGUI/FlatCAMGUI.py:436
msgid "Paint Tool\tI"
msgstr "Unealta Paint\t"

#: flatcamGUI/FlatCAMGUI.py:439
msgid "Transform Tool\tALT+R"
msgstr "Unealta Transformare\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:443
msgid "Toggle Corner Snap\tK"
msgstr "Comută lipire colt\tK"

#: flatcamGUI/FlatCAMGUI.py:446
msgid ">Excellon Editor<"
msgstr ">Editor Excellon<"

#: flatcamGUI/FlatCAMGUI.py:450
msgid "Add Drill Array\tA"
msgstr "Adaugă Arie Găuriri\tA"

#: flatcamGUI/FlatCAMGUI.py:452
msgid "Add Drill\tD"
msgstr "Adaugă Găurire\tD"

#: flatcamGUI/FlatCAMGUI.py:456
msgid "Resize Drill(S)\tR"
msgstr "Redimens. Găuriri\tR"

#: flatcamGUI/FlatCAMGUI.py:458 flatcamGUI/FlatCAMGUI.py:500
msgid "Copy\tC"
msgstr "Copiază\tC"

#: flatcamGUI/FlatCAMGUI.py:460 flatcamGUI/FlatCAMGUI.py:502
msgid "Delete\tDEL"
msgstr "Șterge\tDEL"

#: flatcamGUI/FlatCAMGUI.py:465
msgid "Move Drill(s)\tM"
msgstr "Muta Găuriri\tM"

#: flatcamGUI/FlatCAMGUI.py:468
msgid ">Gerber Editor<"
msgstr ">Editor Gerber<"

#: flatcamGUI/FlatCAMGUI.py:472
msgid "Add Pad\tP"
msgstr "Adaugă Pad\tP"

#: flatcamGUI/FlatCAMGUI.py:474
msgid "Add Pad Array\tA"
msgstr "Adaugă Arie paduri\tA"

#: flatcamGUI/FlatCAMGUI.py:476
msgid "Add Track\tT"
msgstr "Adaugă Traseu\tA"

#: flatcamGUI/FlatCAMGUI.py:478
msgid "Add Region\tN"
msgstr "Adaugă Regiune\tN"

#: flatcamGUI/FlatCAMGUI.py:482
msgid "Poligonize\tALT+N"
msgstr "Poligonizare\tALT+N"

#: flatcamGUI/FlatCAMGUI.py:484
msgid "Add SemiDisc\tE"
msgstr "Adaugă SemiDisc\tE"

#: flatcamGUI/FlatCAMGUI.py:486
msgid "Add Disc\tD"
msgstr "Adaugă Disc\tD"

#: flatcamGUI/FlatCAMGUI.py:488
msgid "Buffer\tB"
msgstr "Bufer\tB"

#: flatcamGUI/FlatCAMGUI.py:490
msgid "Scale\tS"
msgstr "Scalare\tS"

#: flatcamGUI/FlatCAMGUI.py:492
msgid "Mark Area\tALT+A"
msgstr "Marchează aria\tALT+A"

#: flatcamGUI/FlatCAMGUI.py:494
msgid "Eraser\tCTRL+E"
msgstr "Radieră\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:496
msgid "Transform\tALT+R"
msgstr "Unealta Transformare\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:523
msgid "Enable Plot"
msgstr "Activează Afișare"

#: flatcamGUI/FlatCAMGUI.py:524 flatcamGUI/FlatCAMGUI.py:1596
msgid "Disable Plot"
msgstr "Dezactivează Afișare"

#: flatcamGUI/FlatCAMGUI.py:526
msgid "Generate CNC"
msgstr "Generează CNC"

#: flatcamGUI/FlatCAMGUI.py:527
msgid "View Source"
msgstr "Vizualiz. Sursa"

#: flatcamGUI/FlatCAMGUI.py:529 flatcamGUI/FlatCAMGUI.py:1636
msgid "Edit"
msgstr "Editează"

#: flatcamGUI/FlatCAMGUI.py:535 flatcamGUI/FlatCAMGUI.py:1642
#: flatcamTools/ToolProperties.py:25
msgid "Properties"
msgstr "Proprietati"

#: flatcamGUI/FlatCAMGUI.py:564
msgid "File Toolbar"
msgstr "Toolbar Fişiere"

#: flatcamGUI/FlatCAMGUI.py:568
msgid "Edit Toolbar"
msgstr "Toolbar Editare"

#: flatcamGUI/FlatCAMGUI.py:572
msgid "View Toolbar"
msgstr "Toolbar Vizualizare"

#: flatcamGUI/FlatCAMGUI.py:576
msgid "Shell Toolbar"
msgstr "Toolbar Linie de comanda"

#: flatcamGUI/FlatCAMGUI.py:580
msgid "Tools Toolbar"
msgstr "Toolbar Unelte"

#: flatcamGUI/FlatCAMGUI.py:584
msgid "Excellon Editor Toolbar"
msgstr "Toolbar Editor Excellon"

#: flatcamGUI/FlatCAMGUI.py:588
msgid "Geometry Editor Toolbar"
msgstr "Toolbar Editor Geometrii"

#: flatcamGUI/FlatCAMGUI.py:592
msgid "Gerber Editor Toolbar"
msgstr "Toolbar Editor Gerber"

#: flatcamGUI/FlatCAMGUI.py:596
msgid "Grid Toolbar"
msgstr "Toolbar Grid-uri"

#: flatcamGUI/FlatCAMGUI.py:615 flatcamGUI/FlatCAMGUI.py:1854
msgid "Open project"
msgstr "Încarcă Proiect"

#: flatcamGUI/FlatCAMGUI.py:616 flatcamGUI/FlatCAMGUI.py:1855
msgid "Save project"
msgstr "Salvează Proiect"

#: flatcamGUI/FlatCAMGUI.py:619 flatcamGUI/FlatCAMGUI.py:1858
msgid "New Blank Geometry"
msgstr "Geometrie Noua (goală)"

#: flatcamGUI/FlatCAMGUI.py:620
msgid "New Blank Gerber"
msgstr "Gerber Nou (gol)"

#: flatcamGUI/FlatCAMGUI.py:621 flatcamGUI/FlatCAMGUI.py:1859
msgid "New Blank Excellon"
msgstr "Excellon nou (gol)"

#: flatcamGUI/FlatCAMGUI.py:623 flatcamGUI/FlatCAMGUI.py:1861
msgid "Editor"
msgstr "Editor"

#: flatcamGUI/FlatCAMGUI.py:625 flatcamGUI/FlatCAMGUI.py:1863
msgid "Save Object and close the Editor"
msgstr "Salvează Obiectul și inchide Editorul"

#: flatcamGUI/FlatCAMGUI.py:629 flatcamGUI/FlatCAMGUI.py:1867
msgid "&Delete"
msgstr "&Șterge"

#: flatcamGUI/FlatCAMGUI.py:632 flatcamGUI/FlatCAMGUI.py:1870
msgid "&Replot"
msgstr "&Reafișare"

#: flatcamGUI/FlatCAMGUI.py:633 flatcamGUI/FlatCAMGUI.py:1871
msgid "&Clear plot"
msgstr "&Șterge Afișare"

#: flatcamGUI/FlatCAMGUI.py:634 flatcamGUI/FlatCAMGUI.py:1872
msgid "Zoom In"
msgstr "Marire"

#: flatcamGUI/FlatCAMGUI.py:635 flatcamGUI/FlatCAMGUI.py:1873
msgid "Zoom Out"
msgstr "Micsorare"

#: flatcamGUI/FlatCAMGUI.py:636 flatcamGUI/FlatCAMGUI.py:1611
#: flatcamGUI/FlatCAMGUI.py:1874
msgid "Zoom Fit"
msgstr "Marire și ajustare"

#: flatcamGUI/FlatCAMGUI.py:641 flatcamGUI/FlatCAMGUI.py:1879
msgid "&Command Line"
msgstr "&Linie de comanda"

#: flatcamGUI/FlatCAMGUI.py:644 flatcamGUI/FlatCAMGUI.py:1882
msgid "2Sided Tool"
msgstr "Unealta 2-fețe"

#: flatcamGUI/FlatCAMGUI.py:645 flatcamGUI/FlatCAMGUI.py:1883
msgid "&Cutout Tool"
msgstr "Unealta Decupare"

#: flatcamGUI/FlatCAMGUI.py:646 flatcamGUI/FlatCAMGUI.py:1884
#: flatcamGUI/ObjectUI.py:389 flatcamTools/ToolNonCopperClear.py:285
msgid "NCC Tool"
msgstr "Unealta NCC"

#: flatcamGUI/FlatCAMGUI.py:650 flatcamGUI/FlatCAMGUI.py:1888
msgid "Panel Tool"
msgstr "Unealta Panel"

#: flatcamGUI/FlatCAMGUI.py:651 flatcamGUI/FlatCAMGUI.py:1889
#: flatcamTools/ToolFilm.py:204
msgid "Film Tool"
msgstr "Unealta Film"

#: flatcamGUI/FlatCAMGUI.py:652 flatcamGUI/FlatCAMGUI.py:1891
#: flatcamTools/ToolSolderPaste.py:450
msgid "SolderPaste Tool"
msgstr "Unealta Dispenser SP"

#: flatcamGUI/FlatCAMGUI.py:653 flatcamGUI/FlatCAMGUI.py:1892
#: flatcamTools/ToolSub.py:26
msgid "Substract Tool"
msgstr "Unealta Scădere"

#: flatcamGUI/FlatCAMGUI.py:657 flatcamGUI/FlatCAMGUI.py:1897
msgid "Calculators Tool"
msgstr "Unealta Calculatoare"

#: flatcamGUI/FlatCAMGUI.py:661 flatcamGUI/FlatCAMGUI.py:675
#: flatcamGUI/FlatCAMGUI.py:709 flatcamGUI/FlatCAMGUI.py:1901
#: flatcamGUI/FlatCAMGUI.py:1953
msgid "Select"
msgstr "Selectează"

#: flatcamGUI/FlatCAMGUI.py:662 flatcamGUI/FlatCAMGUI.py:1902
msgid "Add Drill Hole"
msgstr "Adaugă o Găurire"

#: flatcamGUI/FlatCAMGUI.py:664 flatcamGUI/FlatCAMGUI.py:1904
msgid "Add Drill Hole Array"
msgstr "Adaugă o arie de Găuriri"

#: flatcamGUI/FlatCAMGUI.py:665 flatcamGUI/FlatCAMGUI.py:1905
msgid "Resize Drill"
msgstr "Redimens. Găurire"

#: flatcamGUI/FlatCAMGUI.py:668 flatcamGUI/FlatCAMGUI.py:1908
msgid "Copy Drill"
msgstr "Copiază Găurire"

#: flatcamGUI/FlatCAMGUI.py:669 flatcamGUI/FlatCAMGUI.py:1910
msgid "Delete Drill"
msgstr "Șterge Găurire"

#: flatcamGUI/FlatCAMGUI.py:672 flatcamGUI/FlatCAMGUI.py:1913
msgid "Move Drill"
msgstr "Muta Găurire"

#: flatcamGUI/FlatCAMGUI.py:676 flatcamGUI/FlatCAMGUI.py:1917
msgid "Add Circle"
msgstr "Adaugă Cerc"

#: flatcamGUI/FlatCAMGUI.py:677 flatcamGUI/FlatCAMGUI.py:1918
msgid "Add Arc"
msgstr "Adaugă Arc"

#: flatcamGUI/FlatCAMGUI.py:679 flatcamGUI/FlatCAMGUI.py:1920
msgid "Add Rectangle"
msgstr "Adaugă Patrulater"

#: flatcamGUI/FlatCAMGUI.py:682 flatcamGUI/FlatCAMGUI.py:1923
msgid "Add Path"
msgstr "Adaugă Cale"

#: flatcamGUI/FlatCAMGUI.py:683 flatcamGUI/FlatCAMGUI.py:1925
msgid "Add Polygon"
msgstr "Adaugă Poligon"

#: flatcamGUI/FlatCAMGUI.py:685 flatcamGUI/FlatCAMGUI.py:1927
msgid "Add Text"
msgstr "Adaugă Text"

#: flatcamGUI/FlatCAMGUI.py:686 flatcamGUI/FlatCAMGUI.py:1929
msgid "Add Buffer"
msgstr "Adaugă Bufer"

#: flatcamGUI/FlatCAMGUI.py:687 flatcamGUI/FlatCAMGUI.py:1930
msgid "Paint Shape"
msgstr "Paint o forma"

#: flatcamGUI/FlatCAMGUI.py:688 flatcamGUI/FlatCAMGUI.py:726
#: flatcamGUI/FlatCAMGUI.py:1931 flatcamGUI/FlatCAMGUI.py:1969
msgid "Eraser"
msgstr "Stergere Selectivă"

#: flatcamGUI/FlatCAMGUI.py:691 flatcamGUI/FlatCAMGUI.py:1935
msgid "Polygon Union"
msgstr "Uniune Poligoane"

#: flatcamGUI/FlatCAMGUI.py:693 flatcamGUI/FlatCAMGUI.py:1937
msgid "Polygon Intersection"
msgstr "Intersecţie Poligoane"

#: flatcamGUI/FlatCAMGUI.py:695 flatcamGUI/FlatCAMGUI.py:1939
msgid "Polygon Subtraction"
msgstr "Substracţie Poligoane"

#: flatcamGUI/FlatCAMGUI.py:698 flatcamGUI/FlatCAMGUI.py:1942
msgid "Cut Path"
msgstr "Taie Cale"

#: flatcamGUI/FlatCAMGUI.py:699
msgid "Copy Shape(s)"
msgstr "Copiază forme geo."

#: flatcamGUI/FlatCAMGUI.py:702
msgid "Delete Shape '-'"
msgstr "Șterge forme geo."

#: flatcamGUI/FlatCAMGUI.py:704 flatcamGUI/FlatCAMGUI.py:733
#: flatcamGUI/FlatCAMGUI.py:1947 flatcamGUI/FlatCAMGUI.py:1976
msgid "Transformations"
msgstr "Transformări"

#: flatcamGUI/FlatCAMGUI.py:706
msgid "Move Objects "
msgstr "Muta obiecte"

#: flatcamGUI/FlatCAMGUI.py:710 flatcamGUI/FlatCAMGUI.py:1954
msgid "Add Pad"
msgstr "Adaugă Pad"

#: flatcamGUI/FlatCAMGUI.py:712 flatcamGUI/FlatCAMGUI.py:1956
msgid "Add Track"
msgstr "Adaugă Traseu"

#: flatcamGUI/FlatCAMGUI.py:713 flatcamGUI/FlatCAMGUI.py:1957
msgid "Add Region"
msgstr "Adaugă Regiune"

#: flatcamGUI/FlatCAMGUI.py:715 flatcamGUI/FlatCAMGUI.py:1959
msgid "Poligonize"
msgstr "Poligonizare"

#: flatcamGUI/FlatCAMGUI.py:717 flatcamGUI/FlatCAMGUI.py:1961
msgid "SemiDisc"
msgstr "SemiDisc"

#: flatcamGUI/FlatCAMGUI.py:718 flatcamGUI/FlatCAMGUI.py:1962
msgid "Disc"
msgstr "Disc"

#: flatcamGUI/FlatCAMGUI.py:724 flatcamGUI/FlatCAMGUI.py:1968
msgid "Mark Area"
msgstr "Marc. aria"

#: flatcamGUI/FlatCAMGUI.py:735 flatcamGUI/FlatCAMGUI.py:1621
#: flatcamGUI/FlatCAMGUI.py:1641 flatcamGUI/FlatCAMGUI.py:1978
#: flatcamTools/ToolMove.py:26
msgid "Move"
msgstr "Mutare"

#: flatcamGUI/FlatCAMGUI.py:741 flatcamGUI/FlatCAMGUI.py:1984
msgid "Snap to grid"
msgstr "Lipire la grid"

#: flatcamGUI/FlatCAMGUI.py:744 flatcamGUI/FlatCAMGUI.py:1987
msgid "Grid X snapping distance"
msgstr "Distanta de lipire la grid pe axa X"

#: flatcamGUI/FlatCAMGUI.py:749 flatcamGUI/FlatCAMGUI.py:1992
msgid "Grid Y snapping distance"
msgstr "Distanta de lipire la grid pe axa Y"

#: flatcamGUI/FlatCAMGUI.py:755 flatcamGUI/FlatCAMGUI.py:1998
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""
"când este activ, valoarea de pe Grid_X\n"
"este copiata și in Grid_Y"

#: flatcamGUI/FlatCAMGUI.py:761 flatcamGUI/FlatCAMGUI.py:2004
msgid "Snap to corner"
msgstr "Lipire la colt"

#: flatcamGUI/FlatCAMGUI.py:765 flatcamGUI/FlatCAMGUI.py:2008
#: flatcamGUI/FlatCAMGUI.py:3374
msgid "Max. magnet distance"
msgstr "Distanta magnetica maxima"

#: flatcamGUI/FlatCAMGUI.py:793 flatcamGUI/FlatCAMGUI.py:1605
msgid "Project"
msgstr "Proiect"

#: flatcamGUI/FlatCAMGUI.py:803
msgid "Selected"
msgstr "Selectat"

#: flatcamGUI/FlatCAMGUI.py:822 flatcamGUI/FlatCAMGUI.py:830
msgid "Plot Area"
msgstr "Arie Afișare"

#: flatcamGUI/FlatCAMGUI.py:854
msgid "General"
msgstr "General"

#: flatcamGUI/FlatCAMGUI.py:863
msgid "APP.  DEFAULTS"
msgstr "Default for App"

#: flatcamGUI/FlatCAMGUI.py:864
msgid "PROJ. OPTIONS "
msgstr "Opțiuni Proiect"

#: flatcamGUI/FlatCAMGUI.py:875
msgid "GERBER"
msgstr "GERBER"

#: flatcamGUI/FlatCAMGUI.py:884
msgid "EXCELLON"
msgstr "EXCELLON"

#: flatcamGUI/FlatCAMGUI.py:893
msgid "GEOMETRY"
msgstr "GEOMETRIE"

#: flatcamGUI/FlatCAMGUI.py:903
msgid "CNC-JOB"
msgstr "CNCJob"

#: flatcamGUI/FlatCAMGUI.py:912
msgid "TOOLS"
msgstr "Unelte"

#: flatcamGUI/FlatCAMGUI.py:929
msgid "Import Preferences"
msgstr "Importa Preferințele"

#: flatcamGUI/FlatCAMGUI.py:932
msgid ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."
msgstr ""
"Importa un set complet de setări ale FlatCAM dintr-un fişier\n"
"care a fost anterior salvat pe HDD..\n"
"\n"
"FlatCAM salvează automat un fişier numit 'factory_defaults'\n"
"la prima pornire. Nu șterge acel fişier."

#: flatcamGUI/FlatCAMGUI.py:939
msgid "Export Preferences"
msgstr "Exporta Preferințele"

#: flatcamGUI/FlatCAMGUI.py:942
msgid ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."
msgstr ""
"Exporta un set complet de setări ale FlatCAM\n"
"intr-un fişier care se salvează pe HDD."

#: flatcamGUI/FlatCAMGUI.py:947
msgid "Open Pref Folder"
msgstr "Deschide Pref Dir"

#: flatcamGUI/FlatCAMGUI.py:950
msgid "Open the folder where FlatCAM save the preferences files."
msgstr "Deschide directorul unde FlatCAM salvează fişierele cu setări."

#: flatcamGUI/FlatCAMGUI.py:958
msgid "Save Preferences"
msgstr "Salvează Pref"

#: flatcamGUI/FlatCAMGUI.py:961
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""
"Salvează setările curente in fişierul numit: 'current_defaults'\n"
"fişier care este cel unde se salvează preferințele cu care se va lucra."

#: flatcamGUI/FlatCAMGUI.py:987
msgid ""
"<b>General Shortcut list</b><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>F3</strong></"
"td>\n"
"                        <td width=\"194\"><span style=\"color:"
"#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>1</strong></td>\n"
"                        <td>&nbsp;Switch to Project Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>2</strong></td>\n"
"                        <td>&nbsp;Switch to Selected Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>3</strong></td>\n"
"                        <td>&nbsp;Switch to Tool Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;New Gerber</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Edit Object (if selected)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>G</strong></td>\n"
"                        <td>&nbsp;Grid On/Off</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Coordinates</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>L</strong></td>\n"
"                        <td>&nbsp;New Excellon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;New Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Set Origin</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Q</strong></td>\n"
"                        <td>&nbsp;Change Units</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Open Properties Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Shell Toggle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a Tool (when in Geometry Selected Tab "
"or in Tools NCC or Tools Paint)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>V</strong></td>\n"
"                        <td>&nbsp;Zoom Fit</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip on X_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip on Y_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;-&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom Out</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;=&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom In</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
"                        <td>&nbsp;Select All</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
"                        <td>&nbsp;Open Excellon File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
"                        <td>&nbsp;Open Gerber File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
"                        <td>&nbsp;New Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
"                        <td>&nbsp;Open Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Project As</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Plot Area</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj_Name</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
"                        <td>&nbsp;Toggle Code Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
"                        <td>&nbsp;Toggle the axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
"                        <td>&nbsp;Open Preferences Window</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
"                        <td>&nbsp;Run a Script</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
"                        <td>&nbsp;Toggle the workspace</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
"                        <td>&nbsp;Calculators Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
"                        <td>&nbsp;2-Sided PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
"                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
"                        <td>&nbsp;Film PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
"                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
"                        <td>&nbsp;Paint Area Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
"                        <td>&nbsp;PDF Import Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformations Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
"                        <td>&nbsp;View File Source</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
"                        <td>&nbsp;Cutout PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
"                        <td>&nbsp;Enable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
"                        <td>&nbsp;Disable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
"                        <td>&nbsp;Disable Non-selected Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Full Screen</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F1</strong></td>\n"
"                        <td>&nbsp;Open Online Manual</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F4</strong></td>\n"
"                        <td>&nbsp;Open Online Tutorials</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Object</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>'`'</strong></td>\n"
"                        <td>&nbsp;(left to Key_1)Toogle Notebook Area (Left "
"Side)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SPACE</strong></td>\n"
"                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Escape</strong></td>\n"
"                        <td>&nbsp;Deselects all objects</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"    \n"
"            "
msgstr ""
"<b>General Shortcut list</b><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>F3</strong></"
"td>\n"
"                        <td width=\"194\"><span style=\"color:"
"#006400\"><strong>&nbsp;Afișează Lista de Shortcut-uri</strong></span></td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>1</strong></td>\n"
"                        <td>&nbsp;Focus in Tab-ul Proiect</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>2</strong></td>\n"
"                        <td>&nbsp;Focus in Tab-ul Selectat</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>3</strong></td>\n"
"                        <td>&nbsp;Focus in Tab-ul Unelte</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Gerber Nou</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Editează Obiectul (daca este selectat)</"
"td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>G</strong></td>\n"
"                        <td>&nbsp;Grid On/Off</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Sari la Coordinate</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>L</strong></td>\n"
"                        <td>&nbsp;Excellon Nou</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Mută Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Geometrie Nouă</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Setează Originea</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Q</strong></td>\n"
"                        <td>&nbsp;Schimbă Unitătile</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Deschide Unealta de Proprietati</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Rotește cu 90 grade CW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Comută Shell (linia de comandă)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Adaugă o Unealtă (când focus-ul este in "
"Tab-ul Selectat pt Geo, sau in Unealta NCC sau unealta Paint)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>V</strong></td>\n"
"                        <td>&nbsp;Mărește și potrivește</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Oglindește pe axa X</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Oglindește pe axa Y</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;-&#39;</strong></td>\n"
"                        <td>&nbsp;Micșorează</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;=&#39;</strong></td>\n"
"                        <td>&nbsp;Mărește</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
"                        <td>&nbsp;Selectează Tot</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
"                        <td>&nbsp;Copiază Obiect</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
"                        <td>&nbsp;Deschide fişier Excellon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
"                        <td>&nbsp;Deschide fişier Gerber</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
"                        <td>&nbsp;Proiect Nou</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Unealta de Masurare</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
"                        <td>&nbsp;Deschide Proiect</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Salvează Proiect ca</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
"                        <td>&nbsp;Comută Aria de Afișare</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
"                        <td>&nbsp;Copiază Nume Obiect</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
"                        <td>&nbsp;Comută Editor Cod</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
"                        <td>&nbsp;Comută Axele</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
"                        <td>&nbsp;Deschide Preferințe</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
"                        <td>&nbsp;Rotește cu 90 grade CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
"                        <td>&nbsp;Rulează un Script</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
"                        <td>&nbsp;Comută Spatiul de Lucru</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Deformează pe axa X</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Deformează pe axa Y</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
"                        <td>&nbsp;Unealta Calculatoare</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
"                        <td>&nbsp;Unealta 2-Layer</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
"                        <td>&nbsp;Unealta Dispensare Pasta Fludor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
"                        <td>&nbsp;Unealta Film PCB</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
"                        <td>&nbsp;Unealta de curățare zone cupru</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
"                        <td>&nbsp;Unealta Paint</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
"                        <td>&nbsp;Unealta de import PDF</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Unealta Transformări</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
"                        <td>&nbsp;Vizualiz. Codul Sursa</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
"                        <td>&nbsp;Unealta de Decupare</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
"                        <td>&nbsp;Activează toate Afișările</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
"                        <td>&nbsp;Dezactivează toate afişările/td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
"                        <td>&nbsp;Dezactivează toate afişările neselectate</"
"td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
"                        <td>&nbsp;Comută Full Screen</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F1</strong></td>\n"
"                        <td>&nbsp;Deschide Manualul Online</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F4</strong></td>\n"
"                        <td>&nbsp;Deschide Tutoriale Online</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Șterge Obiectul</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternativ: Șterge Unealta</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>'`'</strong></td>\n"
"                        <td>&nbsp;(in stânga Tasta_1)Comută Aria Notebook "
"(in stânga)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SPACE</strong></td>\n"
"                        <td>&nbsp;(Dez)Activează afișare obiect</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Escape</strong></td>\n"
"                        <td>&nbsp;Deselectează toate obiectele</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"    \n"
"            "

#: flatcamGUI/FlatCAMGUI.py:1272
msgid ""
"<b>Editor Shortcut list</b><br>\n"
"            <br>\n"
"            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
"strong><br>\n"
"    \n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Within Add Arc will toogle the ARC "
"direction: CW or CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Polygon Intersection Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>I</strong></td>\n"
"                        <td>&nbsp;Paint Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>K</strong></td>\n"
"                        <td>&nbsp;Toggle Corner Snap</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Within Add Arc will cycle through the ARC "
"modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Draw a Polygon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Draw a Circle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Draw a Path</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Draw Rectangle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Polygon Substraction Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Text Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>U</strong></td>\n"
"                        <td>&nbsp;Polygon Union Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Editor Transformation Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
"                        <td>&nbsp;Offset shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
"                        <td>&nbsp;Offset shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
"                        <td>&nbsp;Polygon Cut Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Space</strong></td>\n"
"                        <td>&nbsp;Rotate Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ENTER</strong></td>\n"
"                        <td>&nbsp;Finish drawing for certain tools</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Shape</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Drill</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Resize Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a new Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Disc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Add SemiDisc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Add Region</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Add Pad</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Within Track & Region Tools will cycle in "
"REVERSE the bend modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Scale</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Track</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Within Track & Region Tools will cycle "
"FORWARD the bend modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
"                        <td>&nbsp;Eraser Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                     <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+A</strong></td>\n"
"                        <td>&nbsp;Mark Area Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
"                        <td>&nbsp;Poligonize Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformation Tool</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"                    "
msgstr ""
"<b>Lista de teste shortcut in Editor</b><br>\n"
"            <br>\n"
"            <strong><span style=\"color:#0000ff\">EDITOR GEOMETRII</span></"
"strong><br>\n"
"    \n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Deseneaza un arc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Unealta Bufer</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copiază o geometrie</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Pt cazul Adauga Arc va schimba directia "
"curbei: CW sau CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Unealta Intersectie Poligoane</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>I</strong></td>\n"
"                        <td>&nbsp;Unealta Paint</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Sari la locatie (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>K</strong></td>\n"
"                        <td>&nbsp;Comută magnet colt</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Muta geometrie</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Pt cazul Adauga Arc va parcurge modurile "
"de realizare a curbelor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Deseneaza un Poligon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Deseneaza un Cerc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Deseneaza o Cale</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Deseneaza un Patrulater</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Unealta de Substractie Poligoane</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Unealta de adaugare Text</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>U</strong></td>\n"
"                        <td>&nbsp;Unealta de Uniune Poligoane</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Oglindire pe axa X</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Oglindire pe axa Y</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Deformeaza pe axa X</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Deformeaza pe axa Y</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Unealta Transformare din Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
"                        <td>&nbsp;Deplaseaza pe axa X</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
"                        <td>&nbsp;Deplaseaza pe axa Y</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Unealta de masurare</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Inchide Editorul</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
"                        <td>&nbsp;Unealta de Decupare Poligoane</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Space</strong></td>\n"
"                        <td>&nbsp;Roteste geometria</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ENTER</strong></td>\n"
"                        <td>&nbsp;Finalizeaza desenul pt anumite tipuri de "
"geo.</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Renunță si revino la Unealta Selectie</"
"td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Sterge geometrie</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#ff0000\">EDITOR EXCELLON</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Adauga o arie de gauri</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copiază gauri</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Adauga o gaura</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Sari la locatia (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Muta gauri</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Redimensioneaza gauri</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Adauga o noua unealta</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Sterge gauri</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternativ: Sterge Unelte</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Renunță si revino la Unealta de Selectie</"
"td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Inchide Editorul</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#00ff00\">EDITOR GERBER</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Adauga o arie de Paduri</"
"td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Bufer</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copiere</td>\n"
"                    </tr>\n"
"                <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Adauga Disc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Sari la locatia (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Muta</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Adauga Regiune</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Adauga Pad</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;In uneltele Traseu si Regiune va parcurge "
"in Revers modurile de indoire</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Scalare</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Adauga Traseu</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;In uneltele Traseu si Regiune va parcurge "
"in Avans modurile de indoire</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Stergere</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternativ: Sterge aperturi</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Renunță si revino la Unealta Selectie</"
"td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
"                        <td>&nbsp;Unealta Radieră</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Inchide Editorul</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+A</strong></td>\n"
"                        <td>&nbsp;Unealta Marcare Arii</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
"                        <td>&nbsp;Unealta Poligonizare</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Unealta Transformare</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"                    "

#: flatcamGUI/FlatCAMGUI.py:1597
msgid "Toggle Panel"
msgstr "Comută Panel"

#: flatcamGUI/FlatCAMGUI.py:1600
msgid "New"
msgstr "Nou"

#: flatcamGUI/FlatCAMGUI.py:1601
msgid "Geometry"
msgstr "Geometrie"

#: flatcamGUI/FlatCAMGUI.py:1603
msgid "Excellon"
msgstr "Excellon"

#: flatcamGUI/FlatCAMGUI.py:1608
msgid "Grids"
msgstr "Grid-uri"

#: flatcamGUI/FlatCAMGUI.py:1610
msgid "View"
msgstr "Vizualizare"

#: flatcamGUI/FlatCAMGUI.py:1612
msgid "Clear Plot"
msgstr "Șterge Afișare"

#: flatcamGUI/FlatCAMGUI.py:1613
msgid "Replot"
msgstr "Reafișare"

#: flatcamGUI/FlatCAMGUI.py:1616
msgid "Geo Editor"
msgstr "Editor Geometrii"

#: flatcamGUI/FlatCAMGUI.py:1617
msgid "Line"
msgstr "Linie"

#: flatcamGUI/FlatCAMGUI.py:1618
msgid "Rectangle"
msgstr "Patrulater"

#: flatcamGUI/FlatCAMGUI.py:1619 flatcamGUI/FlatCAMGUI.py:5562
#: flatcamGUI/ObjectUI.py:1363
msgid "Cut"
msgstr "Tăiere"

#: flatcamGUI/FlatCAMGUI.py:1624
msgid "Pad"
msgstr "Pad"

#: flatcamGUI/FlatCAMGUI.py:1625
msgid "Pad Array"
msgstr "Arie de paduri"

#: flatcamGUI/FlatCAMGUI.py:1626
msgid "Track"
msgstr "Traseu"

#: flatcamGUI/FlatCAMGUI.py:1627
msgid "Region"
msgstr "Regiune"

#: flatcamGUI/FlatCAMGUI.py:1629
msgid "Exc Editor"
msgstr "Editor EXC."

#: flatcamGUI/FlatCAMGUI.py:1630
msgid "Add Drill"
msgstr "Adaugă găurire"

#: flatcamGUI/FlatCAMGUI.py:1662
msgid "Print Preview"
msgstr "Preview tiparire"

#: flatcamGUI/FlatCAMGUI.py:1663
msgid "Print Code"
msgstr "Tipareste Cod"

#: flatcamGUI/FlatCAMGUI.py:1664
msgid "Find in Code"
msgstr "Cauta in Cod"

#: flatcamGUI/FlatCAMGUI.py:1669
msgid "Replace With"
msgstr "Inlocuieste cu"

#: flatcamGUI/FlatCAMGUI.py:1673 flatcamGUI/FlatCAMGUI.py:5560
#: flatcamGUI/FlatCAMGUI.py:6133 flatcamGUI/ObjectUI.py:1361
#: flatcamTools/ToolPaint.py:248
msgid "All"
msgstr "Toate"

#: flatcamGUI/FlatCAMGUI.py:1675
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""
"Când este bifat, va inlocui toate cuvintele gasite conform ce este in "
"'Cauta'\n"
"cu textul din casuta 'Inlocuieste'"

#: flatcamGUI/FlatCAMGUI.py:1678
msgid "Open Code"
msgstr "Deschide Cod"

#: flatcamGUI/FlatCAMGUI.py:1679
msgid "Save Code"
msgstr "Salvează Cod"

#: flatcamGUI/FlatCAMGUI.py:1714
msgid ""
"Relative neasurement.\n"
"Reference is last click position"
msgstr ""
"Masuratoare relativa.\n"
"Referința este poziţia ultimului click pe canvas."

#: flatcamGUI/FlatCAMGUI.py:1720
msgid ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""
"Masuratoare absoluta.\n"
"Referința este originea (0, 0)."

#: flatcamGUI/FlatCAMGUI.py:1916
msgid "Select 'Esc'"
msgstr "Select"

#: flatcamGUI/FlatCAMGUI.py:1943
msgid "Copy Objects"
msgstr "Copiază Obiecte"

#: flatcamGUI/FlatCAMGUI.py:1945
msgid "Delete Shape"
msgstr "Șterge forme geo"

#: flatcamGUI/FlatCAMGUI.py:1950
msgid "Move Objects"
msgstr "Muta Obiecte"

#: flatcamGUI/FlatCAMGUI.py:2381
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""
"Mai intai selectează o forma geometrică care trebuie taiata\n"
"apoi selectează forma geo. taietoare. La final apasa tasta ~X~ sau\n"
"butonul corespunzator din Toolbar."

#: flatcamGUI/FlatCAMGUI.py:2388 flatcamGUI/FlatCAMGUI.py:2525
#: flatcamGUI/FlatCAMGUI.py:2584 flatcamGUI/FlatCAMGUI.py:2604
msgid "Warning"
msgstr "Atenţie"

#: flatcamGUI/FlatCAMGUI.py:2455 flatcamGUI/FlatCAMGUI.py:2663
#: flatcamGUI/FlatCAMGUI.py:2874
msgid "[WARNING_NOTCL] Cancelled."
msgstr "[WARNING_NOTCL] Anulat."

#: flatcamGUI/FlatCAMGUI.py:2520
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""
"Selectează forma geometrică asupra careia să se\n"
"aplice Unealta Intersecţie."

#: flatcamGUI/FlatCAMGUI.py:2579
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""
"Selectează forma geometrică asupra careia să se\n"
"aplice Unealta Substracţie."

#: flatcamGUI/FlatCAMGUI.py:2599
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""
"Selectează forma geometrică asupra careia să se\n"
"aplice Unealta Uniune."

#: flatcamGUI/FlatCAMGUI.py:2679 flatcamGUI/FlatCAMGUI.py:2891
msgid "[WARNING_NOTCL] Cancelled. Nothing selected to delete."
msgstr "[WARNING_NOTCL] Anulat. Nimic nu este selectat pentru ștergere."

#: flatcamGUI/FlatCAMGUI.py:2763 flatcamGUI/FlatCAMGUI.py:2958
msgid "[WARNING_NOTCL] Cancelled. Nothing selected to copy."
msgstr "[WARNING_NOTCL] Anulat. Nimic nu este selectat pentru copiere."

#: flatcamGUI/FlatCAMGUI.py:2809 flatcamGUI/FlatCAMGUI.py:3004
msgid "[WARNING_NOTCL] Cancelled. Nothing selected to move."
msgstr "[WARNING_NOTCL] Anulat. Nimic nu este selectat pentru mutare."

#: flatcamGUI/FlatCAMGUI.py:3018
msgid "New Tool ..."
msgstr "O noua Unealtă ..."

#: flatcamGUI/FlatCAMGUI.py:3019
msgid "Enter a Tool Diameter:"
msgstr "Introdu un Diametru de Unealtă:"

#: flatcamGUI/FlatCAMGUI.py:3062
msgid "Measurement Tool exit..."
msgstr "Măsurătoarea s-a terminat ..."

#: flatcamGUI/FlatCAMGUI.py:3353
msgid "GUI Preferences"
msgstr "Preferințe GUI"

#: flatcamGUI/FlatCAMGUI.py:3359
msgid "Grid X value:"
msgstr "Valoarea Grid_X:"

#: flatcamGUI/FlatCAMGUI.py:3361
msgid "This is the Grid snap value on X axis."
msgstr "Aceasta este valoare pentru lipire pe Grid pe axa X."

#: flatcamGUI/FlatCAMGUI.py:3366
msgid "Grid Y value:"
msgstr "Valoarea Grid_Y:"

#: flatcamGUI/FlatCAMGUI.py:3368
msgid "This is the Grid snap value on Y axis."
msgstr "Aceasta este valoare pentru lipire pe Grid pe axa Y."

#: flatcamGUI/FlatCAMGUI.py:3373
msgid "Snap Max:"
msgstr "Lipire Max:"

#: flatcamGUI/FlatCAMGUI.py:3378
msgid "Workspace:"
msgstr "Spatiu de lucru:"

#: flatcamGUI/FlatCAMGUI.py:3380
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""
"Desenează un patrulater care delimitează o asuprafata de lucru.\n"
"Scopul este de a ilustra limitele suprafetei noastre de lucru."

#: flatcamGUI/FlatCAMGUI.py:3383
msgid "Wk. format:"
msgstr "Format SL:"

#: flatcamGUI/FlatCAMGUI.py:3385
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""
"Selectează tipul de patrulater care va fi desenat pe canvas,\n"
"pentru a delimita suprafata de lucru disponibila (SL)."

#: flatcamGUI/FlatCAMGUI.py:3398
msgid "Plot Fill:"
msgstr "Culoare Afișare:"

#: flatcamGUI/FlatCAMGUI.py:3400
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Setează culoarea pentru obiectele afisate.\n"
"Primii 6 digiti sunt culoarea efectiva și ultimii\n"
"doi sunt pentru nivelul de transparenţă (alfa)."

#: flatcamGUI/FlatCAMGUI.py:3414 flatcamGUI/FlatCAMGUI.py:3464
#: flatcamGUI/FlatCAMGUI.py:3514
msgid "Alpha Level:"
msgstr "Nivel Alfa:"

#: flatcamGUI/FlatCAMGUI.py:3416
msgid "Set the fill transparency for plotted objects."
msgstr "Setează nivelul de transparenţa pentru obiectele afisate."

#: flatcamGUI/FlatCAMGUI.py:3433
msgid "Plot Line:"
msgstr "Culoare contur:"

#: flatcamGUI/FlatCAMGUI.py:3435
msgid "Set the line color for plotted objects."
msgstr "Setează culoarea conturului."

#: flatcamGUI/FlatCAMGUI.py:3447
msgid "Sel. Fill:"
msgstr "Culoare Selecţie:"

#: flatcamGUI/FlatCAMGUI.py:3449
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Setează culoarea pentru forma de selectare in cazul\n"
"in care selectia se face de la stânga la dreapta.\n"
"Primii 6 digiti sunt culoarea efectiva și ultimii\n"
"doi sunt pentru nivelul de transparenţă (alfa)."

#: flatcamGUI/FlatCAMGUI.py:3466
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr ""
"Setează transparenţa formei de selecţie când selectia\n"
"se face de la stânga la dreapta."

#: flatcamGUI/FlatCAMGUI.py:3483
msgid "Sel. Line:"
msgstr "Contur Selecţie:"

#: flatcamGUI/FlatCAMGUI.py:3485
msgid "Set the line color for the 'left to right' selection box."
msgstr ""
"Setează transparenţa conturului formei de selecţie\n"
"când selectia se face de la stânga la dreapta."

#: flatcamGUI/FlatCAMGUI.py:3497
msgid "Sel2. Fill:"
msgstr "Culoare Selecţie 2:"

#: flatcamGUI/FlatCAMGUI.py:3499
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Setează culoarea pentru forma de selectare in cazul\n"
"in care selectia se face de la dreapta la stânga.\n"
"Primii 6 digiti sunt culoarea efectiva și ultimii\n"
"doi sunt pentru nivelul de transparenţă (alfa)."

#: flatcamGUI/FlatCAMGUI.py:3516
msgid "Set the fill transparency for selection 'right to left' box."
msgstr ""
"Setează transparenţa formei de selecţie când selectia\n"
"se face de la dreapta la stânga."

#: flatcamGUI/FlatCAMGUI.py:3533
msgid "Sel2. Line:"
msgstr "Contur Selecţie 2:"

#: flatcamGUI/FlatCAMGUI.py:3535
msgid "Set the line color for the 'right to left' selection box."
msgstr ""
"Setează transparenţa conturului formei de selecţie\n"
"când selectia se face de la dreapta la stânga."

#: flatcamGUI/FlatCAMGUI.py:3547
msgid "Editor Draw:"
msgstr "Desen Editor:"

#: flatcamGUI/FlatCAMGUI.py:3549
msgid "Set the color for the shape."
msgstr "Setează culoarea pentru forma geometrică din Editor."

#: flatcamGUI/FlatCAMGUI.py:3561
msgid "Editor Draw Sel.:"
msgstr "Sel. Desen Editor:"

#: flatcamGUI/FlatCAMGUI.py:3563
msgid "Set the color of the shape when selected."
msgstr ""
"Setează culoarea formei geometrice in Editor\n"
"când se face o selecţie."

#: flatcamGUI/FlatCAMGUI.py:3575
msgid "Project Items:"
msgstr "Elemente Proiect:"

#: flatcamGUI/FlatCAMGUI.py:3577
msgid "Set the color of the items in Project Tab Tree."
msgstr "Setează culoarea elementelor din tab-ul Proiect."

#: flatcamGUI/FlatCAMGUI.py:3588
msgid "Proj. Dis. Items:"
msgstr "Elem. proj. dez."

#: flatcamGUI/FlatCAMGUI.py:3590
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""
"Setează culoarea elementelor din tab-ul Proiect\n"
"in cazul in care elementele sunt dezactivate."

#: flatcamGUI/FlatCAMGUI.py:3641
msgid "GUI Settings"
msgstr "Setări GUI"

#: flatcamGUI/FlatCAMGUI.py:3647
msgid "Layout:"
msgstr "Amplasare:"

#: flatcamGUI/FlatCAMGUI.py:3649
msgid ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."
msgstr ""
"Selectează un stil de amplasare a elementelor GUI in FlatCAM.\n"
"Se aplica imediat."

#: flatcamGUI/FlatCAMGUI.py:3665
msgid "Style:"
msgstr "Stil:"

#: flatcamGUI/FlatCAMGUI.py:3667
msgid ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Selectează un stil pentru FlatCAM.\n"
"Se va aplica la urmatoarea pornire a aplicaţiei."

#: flatcamGUI/FlatCAMGUI.py:3678
msgid "HDPI Support:"
msgstr "Suport H-DPI:"

#: flatcamGUI/FlatCAMGUI.py:3680
msgid ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Activează capabilitatea de DPI cu valoare mare.\n"
"Util pentru monitoarele 4k.\n"
"Va fi aplicată la următoarea pornire a aplicaţiei."

#: flatcamGUI/FlatCAMGUI.py:3693
msgid "Clear GUI Settings:"
msgstr "Șterge setările GUI:"

#: flatcamGUI/FlatCAMGUI.py:3695
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""
"Șterge setările GUI pentru FlatCAM,\n"
"cum ar fi: amplasare, stare UI, suport HDPI sau traducerea."

#: flatcamGUI/FlatCAMGUI.py:3698
msgid "Clear"
msgstr "Șterge"

#: flatcamGUI/FlatCAMGUI.py:3702
msgid "Hover Shape:"
msgstr "Forma Hover:"

#: flatcamGUI/FlatCAMGUI.py:3704
msgid ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""
"Activează o forma când se tine mouse-ul deasupra unui obiect\n"
"in canvas-ul FlatCAM. Forma este afișată doar daca obiectul \n"
"nu este selectat."

#: flatcamGUI/FlatCAMGUI.py:3711
msgid "Sel. Shape:"
msgstr "Forma Sel.:"

#: flatcamGUI/FlatCAMGUI.py:3713
msgid ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""
"Activează o formă de selectie pt obiectele FlatCAM.\n"
"Se afisează când mouse-ul selectează un obiect\n"
"pe canvas-ul FlatCAM fie facând click pe obiect fie prin\n"
"crearea unei ferestre de selectie."

#: flatcamGUI/FlatCAMGUI.py:3755
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr "Esti sigur că dorești să ștergi setările GUI?\n"

#: flatcamGUI/FlatCAMGUI.py:3758
msgid "Clear GUI Settings"
msgstr "Șterge Setările GUI"

#: flatcamGUI/FlatCAMGUI.py:3779
msgid "App Preferences"
msgstr "Preferințele Aplicaţie"

#: flatcamGUI/FlatCAMGUI.py:3785
msgid "<b>Units:</b>"
msgstr "<b>Unitati:</b>"

#: flatcamGUI/FlatCAMGUI.py:3786
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."
msgstr ""
"Unitatea de masura pt FlatCAM.\n"
"Este setată la fiecare pornire a programului."

#: flatcamGUI/FlatCAMGUI.py:3789
msgid "IN"
msgstr "Inch"

#: flatcamGUI/FlatCAMGUI.py:3790 flatcamGUI/FlatCAMGUI.py:4279
#: flatcamGUI/FlatCAMGUI.py:4540 flatcamGUI/FlatCAMGUI.py:4931
#: flatcamTools/ToolCalculators.py:61 flatcamTools/ToolPcbWizard.py:126
msgid "MM"
msgstr "MM"

#: flatcamGUI/FlatCAMGUI.py:3793
msgid "<b>APP. LEVEL:</b>"
msgstr "<b>Nivel aplic.:</b>"

#: flatcamGUI/FlatCAMGUI.py:3794
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""
"Nivelul default de utilizare pt FlatCAM.\n"
"Nivel BAZA -> functionalitate simplificata, potrivit pt incepatori\n"
"Nivel AVANSAT -> functionalitate completa.\n"
"\n"
"Alegerea efectuata aici va influenta ce aparamtri sunt disponibili\n"
"in Tab-ul SELECTAT dar și in alte parti ale FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:3799 flatcamGUI/FlatCAMGUI.py:4567
msgid "Basic"
msgstr "Baza"

#: flatcamGUI/FlatCAMGUI.py:3800
msgid "Advanced"
msgstr "Avansat"

#: flatcamGUI/FlatCAMGUI.py:3803
msgid "<b>Languages:</b>"
msgstr "<b>Traduceri:</b>"

#: flatcamGUI/FlatCAMGUI.py:3804
msgid "Set the language used throughout FlatCAM."
msgstr "Setează limba folosita pentru textele din FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:3807
msgid "Apply Language"
msgstr "Aplica Traducere"

#: flatcamGUI/FlatCAMGUI.py:3808
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."
msgstr ""
"Seteaza limba folosita in FlatCAM.\n"
"Aplicatia se va restarta după click.\n"
"Windows: cand FlatCAM este instalat in directorul\n"
"Program Files este posibil ca aplicatia să nu se restarteze\n"
"după click datorită unor setări de securitate ale Windows. "

#: flatcamGUI/FlatCAMGUI.py:3817
msgid "Shell at StartUp:"
msgstr "Shell la pornire:"

#: flatcamGUI/FlatCAMGUI.py:3819 flatcamGUI/FlatCAMGUI.py:3824
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""
"Bifează in cazul in care se dorește pornirea\n"
"automata a ferestrei Shell (linia de comanda)\n"
"la initializarea aplicaţiei."

#: flatcamGUI/FlatCAMGUI.py:3829
msgid "Version Check:"
msgstr "Verificare versiune:"

#: flatcamGUI/FlatCAMGUI.py:3831 flatcamGUI/FlatCAMGUI.py:3836
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""
"Bifează daca se dorește verificarea automata\n"
"daca exista o versiune mai noua,\n"
"la pornirea aplicaţiei."

#: flatcamGUI/FlatCAMGUI.py:3841
msgid "Send Stats:"
msgstr "Statistici:"

#: flatcamGUI/FlatCAMGUI.py:3843 flatcamGUI/FlatCAMGUI.py:3848
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""
"Bifează daca esti de acord ca aplicaţia să trimita la pornire\n"
"un set de informatii cu privire la modul in care folosești\n"
"aplicaţia. In acest fel dezvoltatorii vor sti unde să se focalizeze\n"
"in crearea de inbunatatiri."

#: flatcamGUI/FlatCAMGUI.py:3855
msgid "<b>Pan Button:</b>"
msgstr "Buton Pan (mișcare):"

#: flatcamGUI/FlatCAMGUI.py:3856
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""
"Selectează butonul folosit pentru 'mișcare':\n"
"- MMB - butonul din mijloc al mouse-ului\n"
"- RMB - butonul in dreapta al mouse-ului."

#: flatcamGUI/FlatCAMGUI.py:3859
msgid "MMB"
msgstr "MMB"

#: flatcamGUI/FlatCAMGUI.py:3860
msgid "RMB"
msgstr "RMB"

#: flatcamGUI/FlatCAMGUI.py:3863
msgid "<b>Multiple Sel:</b>"
msgstr "<b>Sel. multipla:</b>"

#: flatcamGUI/FlatCAMGUI.py:3864
msgid "Select the key used for multiple selection."
msgstr "Selectează tasta folosita pentru selectia multipla."

#: flatcamGUI/FlatCAMGUI.py:3869
msgid "Project at StartUp:"
msgstr "Proiect la pornire:"

#: flatcamGUI/FlatCAMGUI.py:3871 flatcamGUI/FlatCAMGUI.py:3876
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""
"Bifează aici daca dorești ca zona Notebook să fie\n"
"afișată automat la pornire."

#: flatcamGUI/FlatCAMGUI.py:3881
msgid "Project AutoHide:"
msgstr "Ascundere Proiect:"

#: flatcamGUI/FlatCAMGUI.py:3883 flatcamGUI/FlatCAMGUI.py:3889
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""
"Bifează daca dorești ca zona Notebook să fie ascunsă automat\n"
"când nu sunt obiecte incărcate și să fie afișată automat\n"
"când un obiect nou este creat/incărcat."

#: flatcamGUI/FlatCAMGUI.py:3895
msgid "<b>Enable ToolTips:</b>"
msgstr "<b>Activează ToolTip-uri:</b>"

#: flatcamGUI/FlatCAMGUI.py:3897 flatcamGUI/FlatCAMGUI.py:3902
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""
"Bifează daca dorești ca să fie afisate texte explicative când se\n"
"tine mouse-ul deasupra diverselor texte din FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:3905
msgid "Workers number:"
msgstr "Număr de worker's:"

#: flatcamGUI/FlatCAMGUI.py:3907 flatcamGUI/FlatCAMGUI.py:3916
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""
"Număarul de QThread-uri care sunt disponibile pt aplicatie.\n"
"Un număr mai mare va permite terminarea operatiilor mai rapida\n"
"dar in functie de cat de rapid este calculatorul, poate face ca aplicatia\n"
"sa devina temporar blocată. Poate lua o valoare intre 2 si 16.\n"
"Valoarea standard este 2.\n"
"Dupa schimbarea valoarii, se va aplica la următoarea pornire a aplicatiei."

#: flatcamGUI/FlatCAMGUI.py:3926
msgid "Geo Tolerance:"
msgstr "Toleranta geometrică:"

#: flatcamGUI/FlatCAMGUI.py:3928 flatcamGUI/FlatCAMGUI.py:3937
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""
"Această valoare afectează efectul prametrului Pasi Cerc.\n"
"Valoarea default este 0.01.\n"
"O valoare mai mică va creste detaliile atat in imagine cat si\n"
"in GCode pentru cercuri dar cu pretul unei scăderi in performantă.\n"
"O valoare mai mare va oferi mai multă performantă dar in\n"
"defavoarea nievelului de detalii."

#: flatcamGUI/FlatCAMGUI.py:3973
msgid "\"Open\" behavior"
msgstr "Stil \"Încarcare\""

#: flatcamGUI/FlatCAMGUI.py:3975
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""
"Cand este bifat, calea de salvare a ultimului fiser salvat este folosită "
"cand se \n"
"salvează fisiere si calea de deschidere pt ultimul fisier este folosită cand "
"se \n"
"deschide fisiere.\n"
"\n"
"Cand este debifat, calea de deshidere pt ultimul fisier este folosită pt "
"ambele \n"
"cazuri: fie că se deschide un fisier, fie că se salvează un fisier."

#: flatcamGUI/FlatCAMGUI.py:3984
msgid "Save Compressed Project"
msgstr "Salvează Proiectul comprimat"

#: flatcamGUI/FlatCAMGUI.py:3986
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""
"Daca să se salveze proiectul in mod arhivat.\n"
"Când este bifat aici, se va salva o arhiva a proiectului\n"
"lucru care poate reduce dimensiunea semnificativ."

#: flatcamGUI/FlatCAMGUI.py:3997
msgid "Compression Level:"
msgstr "Nivel compresie:"

#: flatcamGUI/FlatCAMGUI.py:3999
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""
"Nivelul de compresie folosit când se salvează un proiect FlatCAM.\n"
"Valorile posibile sunt [0 ... 9]. Valoarea 0 inseamna compresie minimala\n"
"dar cu consum redus de resurse in timp ce valoarea 9 cere multa memorie RAM\n"
"și in plus, durează semnificativ mai mult."

#: flatcamGUI/FlatCAMGUI.py:4022
msgid "Gerber General"
msgstr "Gerber General"

#: flatcamGUI/FlatCAMGUI.py:4025 flatcamGUI/FlatCAMGUI.py:4391
#: flatcamGUI/FlatCAMGUI.py:5165 flatcamGUI/FlatCAMGUI.py:5534
#: flatcamGUI/ObjectUI.py:150 flatcamGUI/ObjectUI.py:502
#: flatcamGUI/ObjectUI.py:830 flatcamGUI/ObjectUI.py:1347
msgid "<b>Plot Options:</b>"
msgstr "Opțiuni afișare:"

#: flatcamGUI/FlatCAMGUI.py:4032 flatcamGUI/FlatCAMGUI.py:4403
#: flatcamGUI/ObjectUI.py:156 flatcamGUI/ObjectUI.py:503
msgid "Solid"
msgstr "Solid"

#: flatcamGUI/FlatCAMGUI.py:4034 flatcamGUI/ObjectUI.py:158
msgid "Solid color polygons."
msgstr "Poligoane color solide."

#: flatcamGUI/FlatCAMGUI.py:4039 flatcamGUI/ObjectUI.py:164
msgid "M-Color"
msgstr "M-Color"

#: flatcamGUI/FlatCAMGUI.py:4041 flatcamGUI/ObjectUI.py:166
msgid "Draw polygons in different colors."
msgstr ""
"Desenează poligoanele Gerber din multiple culori\n"
"alese in mod aleator."

#: flatcamGUI/FlatCAMGUI.py:4046 flatcamGUI/FlatCAMGUI.py:4397
#: flatcamGUI/FlatCAMGUI.py:5169 flatcamGUI/ObjectUI.py:172
msgid "Plot"
msgstr "Afisează"

#: flatcamGUI/FlatCAMGUI.py:4048 flatcamGUI/FlatCAMGUI.py:5171
#: flatcamGUI/ObjectUI.py:174 flatcamGUI/ObjectUI.py:543
#: flatcamGUI/ObjectUI.py:876 flatcamGUI/ObjectUI.py:1447
msgid "Plot (show) this object."
msgstr "Afisează (arata) acest obiect."

#: flatcamGUI/FlatCAMGUI.py:4053 flatcamGUI/FlatCAMGUI.py:5179
#: flatcamGUI/FlatCAMGUI.py:5617
msgid "Circle Steps:"
msgstr "Aprox. Cerc"

#: flatcamGUI/FlatCAMGUI.py:4055
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""
"Numărul de segmente utilizate pentru\n"
"aproximarea lineara a aperturilor Gerber circulare."

#: flatcamGUI/FlatCAMGUI.py:4070
msgid "Gerber Options"
msgstr "Opțiuni Gerber"

#: flatcamGUI/FlatCAMGUI.py:4073 flatcamGUI/ObjectUI.py:250
msgid "<b>Isolation Routing:</b>"
msgstr "<b>Izolare:</b>"

#: flatcamGUI/FlatCAMGUI.py:4075 flatcamGUI/ObjectUI.py:252
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."
msgstr ""
"Crează un obiect tip Geometrie cu trasee\n"
"care să fie taiate in afara poligoanelor,\n"
"urmărindu-le conturul."

#: flatcamGUI/FlatCAMGUI.py:4086 flatcamGUI/FlatCAMGUI.py:4765
#: flatcamGUI/FlatCAMGUI.py:5906 flatcamGUI/ObjectUI.py:785
#: flatcamGUI/ObjectUI.py:801
msgid "Diameter of the cutting tool."
msgstr "Diametrul uneltei taietoare."

#: flatcamGUI/FlatCAMGUI.py:4093
msgid "Width (# passes):"
msgstr "Latime(# treceri):"

#: flatcamGUI/FlatCAMGUI.py:4095 flatcamGUI/ObjectUI.py:274
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""
"Lăţimea spatiului de izolare\n"
"in număr intreg de grosimi ale uneltei."

#: flatcamGUI/FlatCAMGUI.py:4103 flatcamGUI/ObjectUI.py:282
msgid "Pass overlap:"
msgstr "Suprapunere:"

#: flatcamGUI/FlatCAMGUI.py:4105 flatcamGUI/ObjectUI.py:284
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25% from the tool diameter found "
"above."
msgstr ""
"Cat de mult (in fractii ale diametrului uneltei) să se suprapună trecerea "
"curentă\n"
"peste cea anterioară. \n"
"Exemplu:\n"
"O valoare de 0.25 reprezinta o suprapunere de 25%% din diametrul uneltei."

#: flatcamGUI/FlatCAMGUI.py:4113 flatcamGUI/ObjectUI.py:294
msgid "Milling Type:"
msgstr "Tip Frezare:"

#: flatcamGUI/FlatCAMGUI.py:4115 flatcamGUI/ObjectUI.py:296
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Tipul de frezare:\n"
"- urcare -> potrivit pentru frezare de precizie și pt a reduce uzura "
"uneltei\n"
"- conventional -> pentru cazul când nu exista o compensare a 'backlash-ului'"

#: flatcamGUI/FlatCAMGUI.py:4120 flatcamGUI/ObjectUI.py:301
msgid "Climb"
msgstr "Urcare"

#: flatcamGUI/FlatCAMGUI.py:4121 flatcamGUI/ObjectUI.py:302
msgid "Conv."
msgstr "Conv."

#: flatcamGUI/FlatCAMGUI.py:4125
msgid "Combine Passes"
msgstr "Combina"

#: flatcamGUI/FlatCAMGUI.py:4127 flatcamGUI/ObjectUI.py:308
msgid "Combine all passes into one object"
msgstr "Combina toate trecerile intr-un singur obiect"

#: flatcamGUI/FlatCAMGUI.py:4132
msgid "<b>Clear non-copper:</b>"
msgstr "<b>Curăță non-Cu:</b>"

#: flatcamGUI/FlatCAMGUI.py:4134 flatcamGUI/FlatCAMGUI.py:5794
#: flatcamGUI/ObjectUI.py:383
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""
"Crează un obiect tip Geometrie cu traiectorii unealtă\n"
"care să curete de cupru toate zonele unde se dorește să nu \n"
"fie cupru."

#: flatcamGUI/FlatCAMGUI.py:4143 flatcamGUI/FlatCAMGUI.py:4169
#: flatcamGUI/ObjectUI.py:427 flatcamGUI/ObjectUI.py:461
msgid "Boundary Margin:"
msgstr "Margine:"

#: flatcamGUI/FlatCAMGUI.py:4145 flatcamGUI/ObjectUI.py:429
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""
"Specificati marginea PCB-ului prin desenarea\n"
"unei forme patratice de jur imprejurul la toate obiectele\n"
"la o distanţa minima cu valoarea din acest câmp."

#: flatcamGUI/FlatCAMGUI.py:4155 flatcamGUI/FlatCAMGUI.py:4178
msgid "Rounded corners"
msgstr "C. rotunjite"

#: flatcamGUI/FlatCAMGUI.py:4157
msgid ""
"Creates a Geometry objects with polygons\n"
"covering the copper-free areas of the PCB."
msgstr ""
"Crează un obiect tip Geometrie conținând poligoane\n"
"care acopera toate suprafetele libere de cupru ale PCB-ului."

#: flatcamGUI/FlatCAMGUI.py:4163 flatcamGUI/ObjectUI.py:451
msgid "<b>Bounding Box:</b>"
msgstr "<b>Forma înconjurătoare::</b>"

#: flatcamGUI/FlatCAMGUI.py:4171 flatcamGUI/ObjectUI.py:463
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
"Distanta de la marginile formei înconjurătoare\n"
"pana la cel mai apropiat poligon."

#: flatcamGUI/FlatCAMGUI.py:4180 flatcamGUI/ObjectUI.py:473
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""
"Daca forma înconjurătoare să aibă colțuri rotunjite.\n"
"Raza acesor colțuri va fi egală cu parametrul Margine."

#: flatcamGUI/FlatCAMGUI.py:4194
msgid "Gerber Adv. Options"
msgstr "Opțiuni Av. Gerber"

#: flatcamGUI/FlatCAMGUI.py:4197
msgid "<b>Advanced Param.:</b>"
msgstr "<b>Param. avansati.:</b>"

#: flatcamGUI/FlatCAMGUI.py:4199
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"O lista de parametri Gerber avansati.\n"
"Acesti parametri sunt disponibili doar\n"
"când este selectat Nivelul Avansat pentru\n"
"aplicaţie in Preferințe - > General"

#: flatcamGUI/FlatCAMGUI.py:4209 flatcamGUI/ObjectUI.py:313
msgid "\"Follow\""
msgstr "\"Urmareste\""

#: flatcamGUI/FlatCAMGUI.py:4211 flatcamGUI/ObjectUI.py:315
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""
"Generează o geometrie de tip 'urmăritor'.\n"
"Mai exact, in loc să se genereze un poligon se va genera o 'linie'.\n"
"In acest fel se taie prin mijlocul unui traseu și nu in jurul lui."

#: flatcamGUI/FlatCAMGUI.py:4218
msgid "Table Show/Hide"
msgstr "Arata/Ascunde Tabela"

#: flatcamGUI/FlatCAMGUI.py:4220
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Comută afișarea tabelei de aperturi Gerber.\n"
"când se ascunde aceasta, se vor șterge și toate\n"
"posibil afisatele marcaje ale aperturilor."

#: flatcamGUI/FlatCAMGUI.py:4259
msgid "Gerber Export"
msgstr "Export Gerber"

#: flatcamGUI/FlatCAMGUI.py:4262 flatcamGUI/FlatCAMGUI.py:4914
msgid "<b>Export Options:</b>"
msgstr "<b>Opțiuni Export::</b>"

#: flatcamGUI/FlatCAMGUI.py:4264
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."
msgstr ""
"Acesti parametri listati aici sunt folositi atunci când\n"
"se exporta un fişier Gerber folosind:\n"
"File -> Exportă -> Exportă Gerber"

#: flatcamGUI/FlatCAMGUI.py:4273 flatcamGUI/FlatCAMGUI.py:4925
msgid "<b>Units</b>:"
msgstr "<b>Unitati</b>:"

#: flatcamGUI/FlatCAMGUI.py:4275 flatcamGUI/FlatCAMGUI.py:4281
msgid "The units used in the Gerber file."
msgstr "Unitătile de măsură folosite in fişierul Gerber."

#: flatcamGUI/FlatCAMGUI.py:4278 flatcamGUI/FlatCAMGUI.py:4539
#: flatcamGUI/FlatCAMGUI.py:4930 flatcamTools/ToolCalculators.py:60
#: flatcamTools/ToolPcbWizard.py:125
msgid "INCH"
msgstr "Inch"

#: flatcamGUI/FlatCAMGUI.py:4287 flatcamGUI/FlatCAMGUI.py:4939
msgid "<b>Int/Decimals:</b>"
msgstr "<b>Int/Zecimale:</b>"

#: flatcamGUI/FlatCAMGUI.py:4289
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"intreagă si in partea fractională a numărului."

#: flatcamGUI/FlatCAMGUI.py:4300
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"intreagă a coordonatelor Gerber."

#: flatcamGUI/FlatCAMGUI.py:4314
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"zecimală a coordonatelor Gerber."

#: flatcamGUI/FlatCAMGUI.py:4323 flatcamGUI/FlatCAMGUI.py:5000
msgid "<b>Zeros</b>:"
msgstr "<b>Zero-uri</b>:"

#: flatcamGUI/FlatCAMGUI.py:4326 flatcamGUI/FlatCAMGUI.py:4336
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""
"Aici se setează tipul de suprimare a zerourilor,\n"
"in cazul unui fişier Gerber.\n"
"TZ = zerourile din fata numărului sunt păstrate și\n"
"cele de la final sunt indepărtate.\n"
"LZ = zerourile din fata numărului sunt indepărtate și\n"
"cele de la final sunt păstrate.\n"
"(Invers fată de fişierele Excellon)."

#: flatcamGUI/FlatCAMGUI.py:4333 flatcamGUI/FlatCAMGUI.py:4515
#: flatcamGUI/FlatCAMGUI.py:5010 flatcamTools/ToolPcbWizard.py:111
msgid "LZ"
msgstr "LZ"

#: flatcamGUI/FlatCAMGUI.py:4334 flatcamGUI/FlatCAMGUI.py:4516
#: flatcamGUI/FlatCAMGUI.py:5011 flatcamTools/ToolPcbWizard.py:112
msgid "TZ"
msgstr "TZ"

#: flatcamGUI/FlatCAMGUI.py:4356 flatcamGUI/FlatCAMGUI.py:5041
#: flatcamGUI/FlatCAMGUI.py:5500 flatcamGUI/FlatCAMGUI.py:5792
#: flatcamGUI/FlatCAMGUI.py:5893 flatcamGUI/FlatCAMGUI.py:5987
#: flatcamGUI/FlatCAMGUI.py:6046 flatcamGUI/FlatCAMGUI.py:6149
#: flatcamGUI/FlatCAMGUI.py:6210 flatcamGUI/FlatCAMGUI.py:6409
#: flatcamGUI/FlatCAMGUI.py:6536
msgid "<b>Parameters:</b>"
msgstr "<b>Parametri:</b>"

#: flatcamGUI/FlatCAMGUI.py:4358
msgid "A list of Gerber Editor parameters."
msgstr "O listă de parametri ai Editorului Gerber."

#: flatcamGUI/FlatCAMGUI.py:4366 flatcamGUI/FlatCAMGUI.py:5051
#: flatcamGUI/FlatCAMGUI.py:5510
msgid "Selection limit:"
msgstr "Limita selecţie:"

#: flatcamGUI/FlatCAMGUI.py:4368
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Setează numărul de geometrii selectate peste care\n"
"geometria utilitară devine un simplu pătrat de selectie.\n"
"Creste performanta cand se mută un număr mai mare\n"
"de elemente geometrice."

#: flatcamGUI/FlatCAMGUI.py:4388
msgid "Excellon General"
msgstr "Excellon General"

#: flatcamGUI/FlatCAMGUI.py:4410
msgid "<b>Excellon Format:</b>"
msgstr "<b>Formatul Excellon</b>"

#: flatcamGUI/FlatCAMGUI.py:4412
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""
"Fişierele de găurire NC drills numite generic Excellon\n"
"sunt fişiere care nu respecta clar un format.\n"
"Fiecare companie și-a aplicat propria viziune aşa încât\n"
"s-a ajuns că nu se poate face o recunoaștere automata\n"
"a formatului Excellon in fiecare caz.\n"
"Aici putem seta manual ce format ne asteptăm să gasim,\n"
"când coordonatele nu sunt reprezentate cu\n"
"separator zecimal.\n"
"\n"
"Setări posibile:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"

#: flatcamGUI/FlatCAMGUI.py:4437
msgid "INCH:"
msgstr "Inch"

#: flatcamGUI/FlatCAMGUI.py:4440
msgid "Default values for INCH are 2:4"
msgstr ""
"Valorile default pentru Inch sunt 2:4\n"
"adica 2 parti intregi și 4 zecimale."

#: flatcamGUI/FlatCAMGUI.py:4448 flatcamGUI/FlatCAMGUI.py:4481
#: flatcamGUI/FlatCAMGUI.py:4954
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"intreaga a coordonatelor Excellon."

#: flatcamGUI/FlatCAMGUI.py:4462 flatcamGUI/FlatCAMGUI.py:4495
#: flatcamGUI/FlatCAMGUI.py:4968
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"zecimala a coordonatelor Excellon."

#: flatcamGUI/FlatCAMGUI.py:4470
msgid "METRIC:"
msgstr "Metric"

#: flatcamGUI/FlatCAMGUI.py:4473
msgid "Default values for METRIC are 3:3"
msgstr ""
"Valorile default pentru Metric sunt 3:3\n"
"adica 3 parti intregi și 3 zecimale."

#: flatcamGUI/FlatCAMGUI.py:4504
msgid "Default <b>Zeros</b>:"
msgstr "Suprimare <b>Zero</b>:"

#: flatcamGUI/FlatCAMGUI.py:4507 flatcamGUI/FlatCAMGUI.py:5003
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"Aici se setează tipul de suprimare a zerourilor,\n"
"in cazul unui fişier Excellon.\n"
"LZ = zerourile din fata numărului sunt pastrate și\n"
"cele de la final sunt indepartate.\n"
"TZ = zerourile din fata numărului sunt indepartate și\n"
"cele de la final sunt pastrate.\n"
"(Invers fata de fişierele Gerber)."

#: flatcamGUI/FlatCAMGUI.py:4518
msgid ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"Aici se setează tipul de suprimare a zerourilor,\n"
"in cazul unui fişier Excellon.\n"
"Daca nu se poate face detectia automata la parsarea\n"
"fişierului Excellon, se folosesc aceste valori.\n"
"LZ = zerourile din fata numărului sunt pastrate și\n"
"cele de la final sunt indepartate.\n"
"TZ = zerourile din fata numărului sunt indepartate și\n"
"cele de la final sunt pastrate.\n"
"(Invers fata de fişierele Gerber)."

#: flatcamGUI/FlatCAMGUI.py:4528
msgid "Default <b>Units</b>:"
msgstr "<b>Unitati</b> Excellon:"

#: flatcamGUI/FlatCAMGUI.py:4531
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"Aceasta valoare este valoarea la care se recurge\n"
"in cazul in care nu se poate determina automat\n"
"atunci când se face parsarea fişierlui Excellon.\n"
"Unele fişiere de găurire (Excellon) nu au header\n"
"(unde se gasesc unitatile) și atunci se va folosi\n"
"aceasta valoare."

#: flatcamGUI/FlatCAMGUI.py:4542
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"Aceasta valoare este valoarea la care se recurge\n"
"in cazul in care nu se poate determina automat\n"
"atunci când se face parsarea fişierlui Excellon.\n"
"Unele fişiere de găurire (Excellon) nu au header\n"
"(unde se gasesc unitatile) și atunci se va folosi\n"
"aceasta valoare."

#: flatcamGUI/FlatCAMGUI.py:4550
msgid "<b>Excellon Optimization:</b>"
msgstr "<b>Optimizarea traseului Excellon:</b>"

#: flatcamGUI/FlatCAMGUI.py:4553
msgid "Algorithm:   "
msgstr "Algoritm:"

#: flatcamGUI/FlatCAMGUI.py:4555 flatcamGUI/FlatCAMGUI.py:4569
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If MH is checked then Google OR-Tools algorithm with MetaHeuristic\n"
"Guided Local Path is used. Default search time is 3sec.\n"
"Use set_sys excellon_search_time value Tcl Command to set other values.\n"
"If Basic is checked then Google OR-Tools Basic algorithm is used.\n"
"\n"
"If DISABLED, then FlatCAM works in 32bit mode and it uses \n"
"Travelling Salesman algorithm for path optimization."
msgstr ""
"Se setează tipul de optimizare pentru traiectoria parcursa între\n"
"găurile fişierului Excellon. Avand in vedere posibilul număr mare de găuri,\n"
"folosirea unei optimizari adecvate poate aduce un castig important in "
"viteza\n"
"de procesare CNC.\n"
"MH = algoritm Google OR Tools cu optimiz. ghidata local meta-heuristic.\n"
"Durata default pentru optimizare este de 3 secunde.\n"
"Basic = algoritm Google OR Tools cu optimiz. de baza.\n"
"\n"
"Daca ambele sunt dezactivate atunci rulam varainta de FlatCAM pe 32bit\n"
"care nu este compatibila cu pachetul OR Tools și in acest caz se foloseşte\n"
"algoritmul default: Travelling Salesman (vanzatorul ambulant)."

#: flatcamGUI/FlatCAMGUI.py:4566
msgid "MH"
msgstr "MH"

#: flatcamGUI/FlatCAMGUI.py:4580
msgid "Optimization Time:   "
msgstr "Durata optimiz.:"

#: flatcamGUI/FlatCAMGUI.py:4583
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""
"Când se foloseşte optimziarea MH, aceasta valoare\n"
"reprezinta cat timp se sta pentru fiecare element in\n"
"incercarea de a afla calea optima."

#: flatcamGUI/FlatCAMGUI.py:4626
msgid "Excellon Options"
msgstr "Opțiuni Excellon"

#: flatcamGUI/FlatCAMGUI.py:4629 flatcamGUI/ObjectUI.py:581
msgid "<b>Create CNC Job</b>"
msgstr "<b>Crează CNCJob</b>"

#: flatcamGUI/FlatCAMGUI.py:4631
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""
"Parametrii folositi pentru a crea un obiect FlatCAM tip CNCJob\n"
"din acest obiect Excellon."

#: flatcamGUI/FlatCAMGUI.py:4639 flatcamGUI/FlatCAMGUI.py:5226
#: flatcamGUI/FlatCAMGUI.py:6345 flatcamGUI/ObjectUI.py:592
#: flatcamGUI/ObjectUI.py:1060 flatcamTools/ToolCalculators.py:106
msgid "Cut Z:"
msgstr "Z tăiere:"

#: flatcamGUI/FlatCAMGUI.py:4641 flatcamGUI/ObjectUI.py:594
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""
"Adâncimea de tăiere (valoare negativă).\n"
"Daca se foloseşte o val. pozitivă, aplicaţia\n"
"va incerca in mod automat să schimbe semnul."

#: flatcamGUI/FlatCAMGUI.py:4648 flatcamGUI/FlatCAMGUI.py:5259
#: flatcamGUI/ObjectUI.py:602 flatcamGUI/ObjectUI.py:1096
msgid "Travel Z:"
msgstr "Z Deplasare:"

#: flatcamGUI/FlatCAMGUI.py:4650 flatcamGUI/ObjectUI.py:604
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""
"Înălţimea la care unealtă se deplasează\n"
"in planul X-Y, fără a efectua taieri, adica\n"
"in afara materialului."

#: flatcamGUI/FlatCAMGUI.py:4658 flatcamGUI/FlatCAMGUI.py:5269
msgid "Tool change:"
msgstr "Schimbare unealtă:"

#: flatcamGUI/FlatCAMGUI.py:4660 flatcamGUI/FlatCAMGUI.py:5271
#: flatcamGUI/ObjectUI.py:614
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""
"Include o secventa de schimbare unealtă\n"
"in codul G-Code (pauza pentru schimbare unealtă).\n"
"De obicei este folosita comanda G-Code M6."

#: flatcamGUI/FlatCAMGUI.py:4667 flatcamGUI/FlatCAMGUI.py:5279
msgid "Toolchange Z:"
msgstr "Z schimb. unealtă:"

#: flatcamGUI/FlatCAMGUI.py:4669 flatcamGUI/FlatCAMGUI.py:5281
msgid "Toolchange Z position."
msgstr ""
"Înălţimea la care se efectuează schimbarea uneltei.\n"
"Poate reprezenta Înălţimea unde se gaseste un\n"
"'toolchanger' automat sau acolo unde utilizatorul\n"
"schimba unealtă manual."

#: flatcamGUI/FlatCAMGUI.py:4675
msgid "Feedrate:"
msgstr "Feedrate:"

#: flatcamGUI/FlatCAMGUI.py:4677
msgid ""
"Tool speed while drilling\n"
"(in units per minute)."
msgstr ""
"Viteza cu care se misca unealtă (burghiul) când se fac\n"
"operațiuni de găurire. In unitati pe minut."

#: flatcamGUI/FlatCAMGUI.py:4685
msgid "Spindle Speed:"
msgstr "Viteza Motor:"

#: flatcamGUI/FlatCAMGUI.py:4687 flatcamGUI/FlatCAMGUI.py:5311
#: flatcamGUI/ObjectUI.py:681
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""
"Viteza cu care se roteste motorul ('Spindle').\n"
"In RPM (rotatii pe minut).\n"
"Acest parametru este optional și se poate lasa gol\n"
"daca nu se foloseşte."

#: flatcamGUI/FlatCAMGUI.py:4695 flatcamGUI/FlatCAMGUI.py:5319
msgid "Spindle dir.:"
msgstr "Directie Motor:"

#: flatcamGUI/FlatCAMGUI.py:4697 flatcamGUI/FlatCAMGUI.py:5321
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""
"Aici se setează directia in care motorul se roteste.\n"
"Poate fi:\n"
"- CW = in sensul acelor de ceasornic\n"
"- CCW = in sensul invers acelor de ceasornic"

#: flatcamGUI/FlatCAMGUI.py:4709 flatcamGUI/FlatCAMGUI.py:5333
#: flatcamGUI/ObjectUI.py:689 flatcamGUI/ObjectUI.py:1222
msgid "Dwell:"
msgstr "Pauza:"

#: flatcamGUI/FlatCAMGUI.py:4711 flatcamGUI/FlatCAMGUI.py:5335
#: flatcamGUI/ObjectUI.py:691 flatcamGUI/ObjectUI.py:1225
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""
"O pauza care permite motorului să ajunga la turatia specificata,\n"
"inainte de a incepe mișcarea spre poziţia de tăiere (găurire)."

#: flatcamGUI/FlatCAMGUI.py:4714 flatcamGUI/FlatCAMGUI.py:5338
msgid "Duration:"
msgstr "Durata:"

#: flatcamGUI/FlatCAMGUI.py:4716 flatcamGUI/FlatCAMGUI.py:5340
#: flatcamGUI/ObjectUI.py:696 flatcamGUI/ObjectUI.py:1232
msgid "Number of milliseconds for spindle to dwell."
msgstr "Timpul (ori secunde ori milisec) cat se sta in pauza."

#: flatcamGUI/FlatCAMGUI.py:4728 flatcamGUI/FlatCAMGUI.py:5350
#: flatcamGUI/ObjectUI.py:704
msgid "Postprocessor:"
msgstr "Postprocesor:"

#: flatcamGUI/FlatCAMGUI.py:4730
msgid ""
"The postprocessor file that dictates\n"
"gcode output."
msgstr ""
"Un fişier care prelucrează codul G-Code astfel încât să\n"
"respecte un anumit format care să fie ințeles de diverse\n"
"utilaje. Este responsabil de 'personalizarea' G-Code."

#: flatcamGUI/FlatCAMGUI.py:4739
msgid "<b>Gcode:    </b>"
msgstr "<b>G-Code:</b>"

#: flatcamGUI/FlatCAMGUI.py:4741
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."
msgstr ""
"Alege ce anume să fie folot ca sursa pentru generarea de GCode:\n"
"- Găuri\n"
"- Sloturi\n"
"- Ambele.\n"
"Când se alege Sloturi sau Ambele, sloturile vor fi convertite in serii de "
"găuri."

#: flatcamGUI/FlatCAMGUI.py:4757 flatcamGUI/ObjectUI.py:769
msgid "<b>Mill Holes</b>"
msgstr "<b>Frezare găuri</b>"

#: flatcamGUI/FlatCAMGUI.py:4759 flatcamGUI/ObjectUI.py:771
msgid "Create Geometry for milling holes."
msgstr "Crează un obiect tip Geometrie pentru frezarea găurilor."

#: flatcamGUI/FlatCAMGUI.py:4763
msgid "Drill Tool dia:"
msgstr "Dia. Burghiu Găurire:"

#: flatcamGUI/FlatCAMGUI.py:4770
msgid "Slot Tool dia:"
msgstr "Dia. Freza Slot:"

#: flatcamGUI/FlatCAMGUI.py:4772
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr "Diametrul frezei când se frezează sloturile."

#: flatcamGUI/FlatCAMGUI.py:4784
msgid "Defaults"
msgstr "Val. Implicite"

#: flatcamGUI/FlatCAMGUI.py:4797
msgid "Excellon Adv. Options"
msgstr "Opțiuni Avans. Excellon"

#: flatcamGUI/FlatCAMGUI.py:4803 flatcamGUI/FlatCAMGUI.py:5373
msgid "<b>Advanced Options:</b>"
msgstr "<b>Opțiuni avansate:</b>"

#: flatcamGUI/FlatCAMGUI.py:4805
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object that are shown when App Level is Advanced."
msgstr ""
"Parametri folositi pentru a crea un obiect CNCJob\n"
"pt acest obiect Excellon, parametri care sunt disponibili\n"
"doar in modul Avansat al aplicaţiei."

#: flatcamGUI/FlatCAMGUI.py:4813
msgid "Offset Z:"
msgstr "Z ofset:"

#: flatcamGUI/FlatCAMGUI.py:4815 flatcamGUI/ObjectUI.py:571
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""
"Unele burghie (in special cele cu diametru mai mare)\n"
"au nevoie să găurească mai adanc pentru a depăși conul\n"
"din vârful burghiului astfel încât diametrul găurii de ieșire\n"
"să fie cel dorit.\n"
"Valoarea de aici efectuează o compensare asupra\n"
"parametrului >Z tăiere<."

#: flatcamGUI/FlatCAMGUI.py:4822 flatcamGUI/FlatCAMGUI.py:5384
msgid "Toolchange X,Y:"
msgstr "X,Y schimb. unealtă:"

#: flatcamGUI/FlatCAMGUI.py:4824 flatcamGUI/FlatCAMGUI.py:5386
msgid "Toolchange X,Y position."
msgstr "Poziţia X,Y in format (x,y) unde se face schimbarea uneltei."

#: flatcamGUI/FlatCAMGUI.py:4830 flatcamGUI/FlatCAMGUI.py:5393
#: flatcamGUI/ObjectUI.py:631
msgid "Start move Z:"
msgstr "Z pornire:"

#: flatcamGUI/FlatCAMGUI.py:4832
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Înălţimea uneltei imediat dupa ce se porneste operatia CNC.\n"
"Lasa casuta goala daca nu se foloseşte."

#: flatcamGUI/FlatCAMGUI.py:4839 flatcamGUI/FlatCAMGUI.py:5403
#: flatcamGUI/ObjectUI.py:641 flatcamGUI/ObjectUI.py:1142
msgid "End move Z:"
msgstr "Z oprire:"

#: flatcamGUI/FlatCAMGUI.py:4841 flatcamGUI/FlatCAMGUI.py:5405
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr "Înălţimea la care se parchează freza dupa ce se termina lucrul."

#: flatcamGUI/FlatCAMGUI.py:4848 flatcamGUI/FlatCAMGUI.py:5413
#: flatcamGUI/ObjectUI.py:662
msgid "Feedrate Rapids:"
msgstr "Feedrate rapizi:"

#: flatcamGUI/FlatCAMGUI.py:4850 flatcamGUI/ObjectUI.py:664
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Viteza de găurire, in unitati pe minut.\n"
"Corespunde comenzii G0 și este utila doar pentru\n"
"printerul 3D Marlin, implicit când se foloseşte fişierul\n"
"postprocesor: Marlin. Ignora aceasta parametru in rest."

#: flatcamGUI/FlatCAMGUI.py:4861 flatcamGUI/FlatCAMGUI.py:5437
#: flatcamGUI/ObjectUI.py:715 flatcamGUI/ObjectUI.py:1254
msgid "Probe Z depth:"
msgstr "Z sonda:"

#: flatcamGUI/FlatCAMGUI.py:4863 flatcamGUI/FlatCAMGUI.py:5439
#: flatcamGUI/ObjectUI.py:717 flatcamGUI/ObjectUI.py:1257
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""
"Adâncimea maxima la care este permis sondei să coboare.\n"
"Are o valoare negativă, in unitatile curente."

#: flatcamGUI/FlatCAMGUI.py:4871 flatcamGUI/FlatCAMGUI.py:5447
#: flatcamGUI/ObjectUI.py:727 flatcamGUI/ObjectUI.py:1268
msgid "Feedrate Probe:"
msgstr "Feedrate sonda:"

#: flatcamGUI/FlatCAMGUI.py:4873 flatcamGUI/FlatCAMGUI.py:5449
#: flatcamGUI/ObjectUI.py:729 flatcamGUI/ObjectUI.py:1271
msgid "The feedrate used while the probe is probing."
msgstr "Viteza sondei când aceasta coboara."

#: flatcamGUI/FlatCAMGUI.py:4879 flatcamGUI/FlatCAMGUI.py:5456
msgid "Fast Plunge:"
msgstr "Plonjare rapida:"

#: flatcamGUI/FlatCAMGUI.py:4881 flatcamGUI/FlatCAMGUI.py:5458
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""
"Prin bifarea de aici, mișcarea de la Înălţimea unde se face schimbarea "
"uneltei\n"
"pana la Înălţimea unde se face deplasarea între taieri, se va face cu "
"comanda G0.\n"
"Aceasta inseamna că se va folosi viteza maxima disponibila.\n"
"\n"
"ATENTIE: mișcarea aceasta pe verticala se face la coordonatele X, Y unde se "
"schimba\n"
"unealta. Daca aveti ceva plasat sub unealtă ceva se va strica."

#: flatcamGUI/FlatCAMGUI.py:4890
msgid "Fast Retract:"
msgstr "Retragere rapida:"

#: flatcamGUI/FlatCAMGUI.py:4892
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""
"Strategia de evacuare a găurii tocmai găurite.\n"
"- când nu este bifat, burghiul va ieși din gaura cu viteza feedrate "
"setată, \n"
"G1, pana ajunge la nivelul zero, ulterior ridicându-se pana la Înălţimea de "
"deplasare\n"
"cu viteza maxima G0\n"
"- când este bifat, burghiul se va deplasa de la adâncimea de tăiere pana la "
"adâncimea\n"
"de deplasare cu viteza maxima G0, intr-o singură mișcare."

#: flatcamGUI/FlatCAMGUI.py:4911
msgid "Excellon Export"
msgstr "Export Excellon"

#: flatcamGUI/FlatCAMGUI.py:4916
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""
"Acesti parametri listati aici sunt folositi atunci când\n"
"se exporta un fişier Excellon folosind:\n"
"File -> Exporta -> Exporta Excellon"

#: flatcamGUI/FlatCAMGUI.py:4927 flatcamGUI/FlatCAMGUI.py:4933
msgid "The units used in the Excellon file."
msgstr "Unitatile de masura folosite in fişierul Excellon."

#: flatcamGUI/FlatCAMGUI.py:4941
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""
"Fişierele NC, numite usual fişiere Excellon\n"
"sunt fişiere care pot fi gasite in diverse formate.\n"
"Aici se setează formatul Excellon când nu se utilizează\n"
"coordonate cu zecimale."

#: flatcamGUI/FlatCAMGUI.py:4977
msgid "<b>Format:</b>"
msgstr "<b>Format:</b>"

#: flatcamGUI/FlatCAMGUI.py:4979 flatcamGUI/FlatCAMGUI.py:4989
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""
"Selectati tipul formatului de coordonate folosit.\n"
"Coordonatele se pot salva cu punct zecimal sau fără.\n"
"Când nu se foloseşte punctul zecimal ca separator între\n"
"partea intreaga și partea zecimala, este necesar să se\n"
"specifice numărul de digiti folosit pentru partea intreaga\n"
"și numărul de digiti folosit pentru partea zecimala.\n"
"Trebuie specificat și modul in care sunt tratate zerourile:\n"
"- LZ = zerourile prefix sunt pastrate și cele sufix eliminate\n"
"- TZ = zerourile prefix sunt eliminate și cele sufix pastrate."

#: flatcamGUI/FlatCAMGUI.py:4986
msgid "Decimal"
msgstr "Cu dec."

#: flatcamGUI/FlatCAMGUI.py:4987
msgid "No-Decimal"
msgstr "Fără dec."

#: flatcamGUI/FlatCAMGUI.py:5013
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"Acesta este tipul implicit de zero-uri Excellon.\n"
"- LZ = zerourile prefix sunt pastrate și cele sufix eliminate\n"
"- TZ = zerourile prefix sunt eliminate și cele sufix pastrate."

#: flatcamGUI/FlatCAMGUI.py:5043
msgid "A list of Excellon Editor parameters."
msgstr "O lista de parametri ai Editorului Excellon."

#: flatcamGUI/FlatCAMGUI.py:5053
msgid ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Setează numărul de geometrii Excellon selectate peste care\n"
"geometria utilitară devine o simplă formă pătratica de \n"
"selectie.\n"
"Creste performanta cand se muta un număr mai mare de \n"
"elemente geometrice."

#: flatcamGUI/FlatCAMGUI.py:5065
msgid "New Tool Dia:"
msgstr "Dia. nou unealtă:"

#: flatcamGUI/FlatCAMGUI.py:5088
msgid "<b>Linear Drill Array:</b>"
msgstr "<b>Arie de gauri lineara:</b>"

#: flatcamGUI/FlatCAMGUI.py:5092
msgid "Linear Dir.:"
msgstr "Dir. Lineara:"

#: flatcamGUI/FlatCAMGUI.py:5128
msgid "<b>Circular Drill Array:</b>"
msgstr "<b>Arie de gauri circ.:</b>"

#: flatcamGUI/FlatCAMGUI.py:5132
msgid "Circular Dir.:"
msgstr "Directie circ.:"

#: flatcamGUI/FlatCAMGUI.py:5134
msgid ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."
msgstr ""
"Directia pentru aria circulara.\n"
"Poate fi CW = in sensul acelor de ceasornic sau CCW = invers acelor de "
"ceasornic"

#: flatcamGUI/FlatCAMGUI.py:5145
msgid "Circ. Angle:"
msgstr "Unghi circ.:"

#: flatcamGUI/FlatCAMGUI.py:5162
msgid "Geometry General"
msgstr "Geometrie General"

#: flatcamGUI/FlatCAMGUI.py:5181
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"Numărul de segmente utilizate pentru\n"
"aproximarea lineara a <b>Geometriilor</b> circulare."

#: flatcamGUI/FlatCAMGUI.py:5189
msgid "<b>Tools:</b>"
msgstr "<b>Unelte:</b>"

#: flatcamGUI/FlatCAMGUI.py:5195 flatcamGUI/FlatCAMGUI.py:5804
msgid "Diameters of the cutting tools, separated by ','"
msgstr "Diametrele pentru unelte taietoare, separate cu virgula"

#: flatcamGUI/FlatCAMGUI.py:5209
msgid "Geometry Options"
msgstr "Opțiuni Geometrie"

#: flatcamGUI/FlatCAMGUI.py:5214
msgid "<b>Create CNC Job:</b>"
msgstr "<b>Crează CNCJob:</b>"

#: flatcamGUI/FlatCAMGUI.py:5216
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""
"Crează un obiect CNCJob care urmareste conturul\n"
"acestui obiect tip Geometrie."

#: flatcamGUI/FlatCAMGUI.py:5228 flatcamGUI/ObjectUI.py:1063
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""
"Adâncimea la care se taie sub suprafata de cupru.\n"
"Valoare negativă."

#: flatcamGUI/FlatCAMGUI.py:5236
msgid "Multidepth"
msgstr "MultiPas"

#: flatcamGUI/FlatCAMGUI.py:5238
msgid "Multidepth usage: True or False."
msgstr ""
"Daca se folosesc sau nu pasi multipli de tăiere\n"
"pentru a ajunge la adâncimea de tăiere."

#: flatcamGUI/FlatCAMGUI.py:5243
msgid "Depth/Pass:"
msgstr "Adanc./Trecere"

#: flatcamGUI/FlatCAMGUI.py:5245
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""
"Adâncimea la care se taie la fiecare trecere,\n"
"atunci când >MultiPas< este folosit.\n"
"Valoarea este pozitivă desi reprezinta o fracţie\n"
"a adancimii de tăiere care este o valoare negativă."

#: flatcamGUI/FlatCAMGUI.py:5261 flatcamGUI/ObjectUI.py:1099
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
"Înălţimea la care se misca unealta când nu taie,\n"
"deasupra materialului."

#: flatcamGUI/FlatCAMGUI.py:5288 flatcamGUI/ObjectUI.py:1154
msgid "Feed Rate X-Y:"
msgstr "Feedrate X-Y:"

#: flatcamGUI/FlatCAMGUI.py:5290 flatcamGUI/ObjectUI.py:1157
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
"Viteza de tăiere in planul X-Y\n"
"in unitati pe minut."

#: flatcamGUI/FlatCAMGUI.py:5298
msgid "Feed Rate Z:"
msgstr "Feedrate Z:"

#: flatcamGUI/FlatCAMGUI.py:5300
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
"Viteza de tăiere in planul Z\n"
"in unitati pe minut.\n"
"Mai este numita și viteza de plonjare."

#: flatcamGUI/FlatCAMGUI.py:5309 flatcamGUI/ObjectUI.py:679
#: flatcamGUI/ObjectUI.py:1209
msgid "Spindle speed:"
msgstr "Viteza motor:"

#: flatcamGUI/FlatCAMGUI.py:5352
msgid ""
"The postprocessor file that dictates\n"
"Machine Code output."
msgstr ""
"Un fişier care prelucrează codul G-Code astfel încât să\n"
"respecte un anumit format care să fie ințeles de diverse\n"
"utilaje. Este responsabil de 'personalizarea' G-Code."

#: flatcamGUI/FlatCAMGUI.py:5368
msgid "Geometry Adv. Options"
msgstr "Opțiuni Avans. Geometrie"

#: flatcamGUI/FlatCAMGUI.py:5375
msgid ""
"Parameters to create a CNC Job object\n"
"tracing the contours of a Geometry object."
msgstr ""
"Parametrii folositi pentru a crea un obiect CNCJob,\n"
"urmărind contururile unui obiect tip Geometrie."

#: flatcamGUI/FlatCAMGUI.py:5395
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Înălţimea uneltei la care se gaseste la inceputul lucrului.\n"
"Lasa câmpul gol daca nu folosești aceasta."

#: flatcamGUI/FlatCAMGUI.py:5415
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Viteza de tăiere in planul X-Y, in unitati pe minut,\n"
"in legatura cu comanda G00.\n"
"Este utila doar când se foloseşte cu un printer 3D Marlin,\n"
"pentru toate celelalte cazuri ignora acest parametru."

#: flatcamGUI/FlatCAMGUI.py:5427
msgid "Re-cut 1st pt."
msgstr "Re-tăiere 1-ul pt."

#: flatcamGUI/FlatCAMGUI.py:5429 flatcamGUI/ObjectUI.py:1200
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""
"Bifează daca se dorește o siguranţă ca resturile de cupru\n"
"care pot ramane acolo unde se intalneste inceputul taierii\n"
"cu sfârşitul acesteia (este vorba de un contur), sunt eliminate\n"
"prin taierea peste acest punct."

#: flatcamGUI/FlatCAMGUI.py:5468
msgid "Seg. X size:"
msgstr "Dim. seg X."

#: flatcamGUI/FlatCAMGUI.py:5470
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""
"Dimensiunea segmentului de traseu pe axa X.\n"
"Folositor pentru auto-nivelare.\n"
"O valoare de 0 inseamnaca nu se face segmentare\n"
"pe axa X."

#: flatcamGUI/FlatCAMGUI.py:5479
msgid "Seg. Y size:"
msgstr "Dim. seg Y."

#: flatcamGUI/FlatCAMGUI.py:5481
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""
"Dimensiunea segmentului de traseu pe axa Y.\n"
"Folositor pentru auto-nivelare.\n"
"O valoare de 0 inseamnaca nu se face segmentare\n"
"pe axa Y."

#: flatcamGUI/FlatCAMGUI.py:5497
msgid "Geometry Editor"
msgstr "Editor Geometrii"

#: flatcamGUI/FlatCAMGUI.py:5502
msgid "A list of Geometry Editor parameters."
msgstr "O lista de parametri ai Editorului de Geometrii."

#: flatcamGUI/FlatCAMGUI.py:5512
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Setează numărul de geometriil selectate peste care\n"
"geometria utilitară devine o simplă formă pătratica de \n"
"selectie.\n"
"Creste performanta cand se muta un număr mai mare de \n"
"elemente geometrice."

#: flatcamGUI/FlatCAMGUI.py:5531
msgid "CNC Job General"
msgstr "CNCJob General"

#: flatcamGUI/FlatCAMGUI.py:5544 flatcamGUI/ObjectUI.py:541
#: flatcamGUI/ObjectUI.py:874 flatcamGUI/ObjectUI.py:1444
msgid "Plot Object"
msgstr "Afisează"

#: flatcamGUI/FlatCAMGUI.py:5551
msgid "Plot kind:"
msgstr "Tip afișare:"

#: flatcamGUI/FlatCAMGUI.py:5553 flatcamGUI/ObjectUI.py:1353
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""
"Aici se poate selecta tipul de afișare a geometriilor.\n"
"Acestea pot fi:\n"
"- Voiaj -> miscarile deasupra materialului\n"
"- Tăiere -> miscarile in material, tăiere\n"
"- Amandoua"

#: flatcamGUI/FlatCAMGUI.py:5561 flatcamGUI/ObjectUI.py:1362
msgid "Travel"
msgstr "Voiaj"

#: flatcamGUI/FlatCAMGUI.py:5570
msgid "Display Annotation:"
msgstr "Afiseaza notatii:"

#: flatcamGUI/FlatCAMGUI.py:5572 flatcamGUI/ObjectUI.py:1369
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""
"Aici se poate seta daca sa se afiseze notatiile text.\n"
"Cand este selectat va afisa numerele in ordine pt fiecare\n"
"capat al liniilor de traversare."

#: flatcamGUI/FlatCAMGUI.py:5584
msgid "Annotation Size:"
msgstr "Dim. anotate:"

#: flatcamGUI/FlatCAMGUI.py:5586
msgid "The font size of the annotation text. In pixels."
msgstr "Dimensiunea fontului pt. textul cu notatii. In pixeli."

#: flatcamGUI/FlatCAMGUI.py:5594
msgid "Annotation Color:"
msgstr "Culoarea anotatii:"

#: flatcamGUI/FlatCAMGUI.py:5596
msgid "Set the font color for the annotation texts."
msgstr "Setează culoarea pentru textul cu anotatii."

#: flatcamGUI/FlatCAMGUI.py:5619
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"Numărul de segmente utilizate pentru\n"
"aproximarea lineara a reprezentarilor <b>GCodului</b> circular."

#: flatcamGUI/FlatCAMGUI.py:5629
msgid ""
"Diameter of the tool to be\n"
"rendered in the plot."
msgstr "Diametrul uneltei care să fie redat prin afișare."

#: flatcamGUI/FlatCAMGUI.py:5637
msgid "Coords dec.:"
msgstr "Coord. zec.:"

#: flatcamGUI/FlatCAMGUI.py:5639
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""
"Numărul de zecimale care să fie folosit in \n"
"coordonatele X,Y,Z in codul CNC (GCode etc)."

#: flatcamGUI/FlatCAMGUI.py:5647
msgid "Feedrate dec.:"
msgstr "Feedrate zec.:"

#: flatcamGUI/FlatCAMGUI.py:5649
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""
"Numărul de zecimale care să fie folosit in \n"
"parametrul >Feedrate< in codul CNC (GCode etc)."

#: flatcamGUI/FlatCAMGUI.py:5664
msgid "CNC Job Options"
msgstr "Opțiuni CNCJob"

#: flatcamGUI/FlatCAMGUI.py:5667 flatcamGUI/FlatCAMGUI.py:5708
msgid "<b>Export G-Code:</b>"
msgstr "<b>Exporta G-Code:</b>"

#: flatcamGUI/FlatCAMGUI.py:5669 flatcamGUI/FlatCAMGUI.py:5710
#: flatcamGUI/ObjectUI.py:1480
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
"Exporta și salvează codul G-Code intr-un fişier\n"
"care este salvat pe HDD."

#: flatcamGUI/FlatCAMGUI.py:5675
msgid "Prepend to G-Code:"
msgstr "Adaugă la inceputul G-Code:"

#: flatcamGUI/FlatCAMGUI.py:5677
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""
"Adaugă aici orice comenzi G-Code care se dorește să fie\n"
"inserate la inceputul codului G-Code."

#: flatcamGUI/FlatCAMGUI.py:5686
msgid "Append to G-Code:"
msgstr "Adaugă la sfârşitul G-Code:"

#: flatcamGUI/FlatCAMGUI.py:5688 flatcamGUI/ObjectUI.py:1502
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Adaugă aici orice comenzi G-Code care se dorește să fie\n"
"inserate la sfârşitul codului G-Code."

#: flatcamGUI/FlatCAMGUI.py:5705
msgid "CNC Job Adv. Options"
msgstr "Opțiuni Avans. CNCJob"

#: flatcamGUI/FlatCAMGUI.py:5716 flatcamGUI/ObjectUI.py:1520
msgid "Toolchange G-Code:"
msgstr "G-Code pt schimb unealtă:"

#: flatcamGUI/FlatCAMGUI.py:5718
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro."
msgstr ""
"Adaugă aici orice comenzi G-Code care se dorește să fie\n"
"inserate in codul G-Code atunci când se intalneste comanda M6.\n"
"Comanda M6 este inlocuita.\n"
"Aceata va constitui un macro pentru schimbul uneltelor."

#: flatcamGUI/FlatCAMGUI.py:5732 flatcamGUI/ObjectUI.py:1542
msgid "Use Toolchange Macro"
msgstr "Fol. Macro schimb unealtă"

#: flatcamGUI/FlatCAMGUI.py:5734 flatcamGUI/ObjectUI.py:1545
msgid ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."
msgstr ""
"Bifează aici daca dorești să folosești Macro pentru\n"
"schimb unelte."

#: flatcamGUI/FlatCAMGUI.py:5746 flatcamGUI/ObjectUI.py:1554
msgid ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"
msgstr ""
"O lista de variabile FlatCAM care se pot folosi in evenimentul \n"
"de schimb al uneltei (când se intalneste comanda M6).\n"
"Este necesar să fie inconjurate de simbolul '%'."

#: flatcamGUI/FlatCAMGUI.py:5753 flatcamGUI/ObjectUI.py:1561
msgid "Parameters"
msgstr "Parametri"

#: flatcamGUI/FlatCAMGUI.py:5756 flatcamGUI/ObjectUI.py:1564
msgid "FlatCAM CNC parameters"
msgstr "Parametri FlatCAM CNC"

#: flatcamGUI/FlatCAMGUI.py:5757 flatcamGUI/ObjectUI.py:1565
msgid "tool = tool number"
msgstr "tool = numărul uneltei"

#: flatcamGUI/FlatCAMGUI.py:5758 flatcamGUI/ObjectUI.py:1566
msgid "tooldia = tool diameter"
msgstr "tooldia = dimaetrul uneltei"

#: flatcamGUI/FlatCAMGUI.py:5759 flatcamGUI/ObjectUI.py:1567
msgid "t_drills = for Excellon, total number of drills"
msgstr "t_drills = pt Excellom, numărul total de operațiuni găurire"

#: flatcamGUI/FlatCAMGUI.py:5760 flatcamGUI/ObjectUI.py:1568
msgid "x_toolchange = X coord for Toolchange"
msgstr "x_toolchange = coord. X pt schimb unealtă"

#: flatcamGUI/FlatCAMGUI.py:5761 flatcamGUI/ObjectUI.py:1569
msgid "y_toolchange = Y coord for Toolchange"
msgstr "y_toolchange = coord. Y pt schimb unealtă"

#: flatcamGUI/FlatCAMGUI.py:5762 flatcamGUI/ObjectUI.py:1570
msgid "z_toolchange = Z coord for Toolchange"
msgstr "z_toolchange = coord. Z pt schimb unealtă"

#: flatcamGUI/FlatCAMGUI.py:5763
msgid "z_cut = Z depth for the cut"
msgstr "z_cut = Z adâncimea de tăiere"

#: flatcamGUI/FlatCAMGUI.py:5764
msgid "z_move = Z height for travel"
msgstr "z_move = Z Înălţimea deplasare"

#: flatcamGUI/FlatCAMGUI.py:5765 flatcamGUI/ObjectUI.py:1573
msgid "z_depthpercut = the step value for multidepth cut"
msgstr "z_depthpercut = pasul pentru taierea progresiva"

#: flatcamGUI/FlatCAMGUI.py:5766 flatcamGUI/ObjectUI.py:1574
msgid "spindlesspeed = the value for the spindle speed"
msgstr "spindlesspeed = valoarea viteza motor"

#: flatcamGUI/FlatCAMGUI.py:5768 flatcamGUI/ObjectUI.py:1575
msgid "dwelltime = time to dwell to allow the spindle to reach it's set RPM"
msgstr "dwelltime = durata de asteptare ca motorul să ajunga la turatia setată"

#: flatcamGUI/FlatCAMGUI.py:5789
msgid "NCC Tool Options"
msgstr "Opțiuni Unealta NCC"

#: flatcamGUI/FlatCAMGUI.py:5802 flatcamGUI/FlatCAMGUI.py:6547
msgid "Tools dia:"
msgstr "Dia unealtă:"

#: flatcamGUI/FlatCAMGUI.py:5812 flatcamTools/ToolNonCopperClear.py:167
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"Cat de mult (fracţie) din diametrul uneltei să se suprapună la fiecare "
"trecere a uneltei.\n"
"Exemplu:\n"
"O valoare aici de 0.25 inseamna 25\\% din diametrul uneltei de mai sus..\n"
"\n"
"Ajustează valoarea incepand de la valori mici\n"
"și pe urma creste daca ariile care ar trebui >curățate< inca\n"
"nu sunt procesate.\n"
"Valori scazute = procesare rapida,execuţie rapida a PCB-ului.\n"
"Valori mari= procesare lenta cat și o execuţie la fel de lenta a PCB-ului,\n"
"datorita numărului mai mare de treceri-tăiere."

#: flatcamGUI/FlatCAMGUI.py:5828 flatcamTools/ToolNonCopperClear.py:183
msgid "Bounding box margin."
msgstr "Marginea pentru forma înconjurătoare."

#: flatcamGUI/FlatCAMGUI.py:5837 flatcamTools/ToolNonCopperClear.py:192
#: flatcamTools/ToolPaint.py:190
msgid ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."
msgstr ""
"Algoritm pt curățare de cupru:<BR><B>Standard</B>: Pas fix spre interior."
"<BR><B>Punct-samanta</B>: De la punctul samanta, spre expterior.<BR><B>Linii "
"drepte</B>: Linii paralele."

#: flatcamGUI/FlatCAMGUI.py:5869 flatcamTools/ToolNonCopperClear.py:224
#: flatcamTools/ToolPaint.py:222
msgid "Rest M.:"
msgstr "Rest M.:"

#: flatcamGUI/FlatCAMGUI.py:5871
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool.\n"
"If not checked, use the standard algorithm."
msgstr ""
"Daca este bifat, foloste 'rest machining'.\n"
"Mai exact, se va curăța cuprul din afara traseelor,\n"
"folosind mai intai unealta cu diametrul cel mai mare\n"
"apoi folosindu-se progresiv unelte cu diametrul tot\n"
"mai mic, din cele disponibile in tabela de unelte, pt a\n"
"curăța zonele care nu s-au putut curăța cu unealta\n"
"precedenta.\n"
"Daca nu este bifat, foloseşte algoritmul standard."

#: flatcamGUI/FlatCAMGUI.py:5890
msgid "Cutout Tool Options"
msgstr "Opțiuni Unealta Decupare"

#: flatcamGUI/FlatCAMGUI.py:5895 flatcamGUI/ObjectUI.py:399
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""
"Crează taieturi de jur inprejurul PCB-ului,\n"
"lasand punţi pentru a separa PCB-ul de \n"
"placa din care a fost taiat."

#: flatcamGUI/FlatCAMGUI.py:5913 flatcamTools/ToolCutOut.py:77
msgid "Obj kind:"
msgstr "Tipul de obiect:"

#: flatcamGUI/FlatCAMGUI.py:5915 flatcamTools/ToolCutOut.py:79
msgid ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."
msgstr ""
"Genul de obiect pe care vrem să il decupăm..<BR>- <B>Unic</B>: contine un "
"singur contur PCB in obiectul Gerber .<BR>- <B>Panel</B>: un obiect Gerber "
"tip panel, care este făcut\n"
"din mai multe contururi PCB."

#: flatcamGUI/FlatCAMGUI.py:5922 flatcamGUI/FlatCAMGUI.py:6132
#: flatcamTools/ToolCutOut.py:85 flatcamTools/ToolPaint.py:247
msgid "Single"
msgstr "Unic"

#: flatcamGUI/FlatCAMGUI.py:5923 flatcamTools/ToolCutOut.py:86
msgid "Panel"
msgstr "Panel"

#: flatcamGUI/FlatCAMGUI.py:5929
msgid ""
"Distance from objects at which\n"
"to draw the cutout."
msgstr "Distanta de obiecte la care să se deseneze forma taietoare."

#: flatcamGUI/FlatCAMGUI.py:5936 flatcamTools/ToolCutOut.py:111
msgid "Gap size:"
msgstr "Dim. punte:"

#: flatcamGUI/FlatCAMGUI.py:5938
msgid ""
"Size of the gaps in the toolpath\n"
"that will remain to hold the\n"
"board in place."
msgstr ""
"Dimensiunea punţilor in trecerile de tăiere\n"
"care vor mentine PCB-ul in poziţie, fără să cada\n"
"din placa 'mama' dupa decupare."

#: flatcamGUI/FlatCAMGUI.py:5946 flatcamTools/ToolCutOut.py:149
msgid "Gaps:"
msgstr "Punţi:"

#: flatcamGUI/FlatCAMGUI.py:5948
msgid ""
"Number of bridge gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Numărul de punţi folosite in decupare.\n"
"Pot fi un număr maxim de 8 punţi aranjate in felul\n"
"următor:\n"
"- lr = stânga -dreapta\n"
"- tb = sus - jos\n"
"- 4 = stânga -dreapta - sus - jos\n"
"- 2lr = 2* stânga - 2* dreapta\n"
"- 2tb = 2* sus - 2* jos\n"
"- 8 = 2* stânga - 2* dreapta - 2* sus - 2* jos"

#: flatcamGUI/FlatCAMGUI.py:5969 flatcamTools/ToolCutOut.py:130
msgid "Convex Sh.:"
msgstr "Formă Conv."

#: flatcamGUI/FlatCAMGUI.py:5971
msgid "Create a convex shape surrounding the entire PCB."
msgstr ""
"Generează un obiect tip Geometrie care va inconjura\n"
"tot PCB-ul. Forma sa este convexa."

#: flatcamGUI/FlatCAMGUI.py:5984
msgid "2Sided Tool Options"
msgstr "Opțiuni Unealta 2Fețe"

#: flatcamGUI/FlatCAMGUI.py:5989
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""
"O unealtă care ajuta in crearea de PCB-uri cu 2 fețe\n"
"folosind găuri de aliniere."

#: flatcamGUI/FlatCAMGUI.py:5999 flatcamTools/ToolDblSided.py:234
msgid "Drill diam.:"
msgstr "Dia gaura:"

#: flatcamGUI/FlatCAMGUI.py:6001 flatcamTools/ToolDblSided.py:225
#: flatcamTools/ToolDblSided.py:236
msgid "Diameter of the drill for the alignment holes."
msgstr "Diametrul găurii pentru găurile de aliniere."

#: flatcamGUI/FlatCAMGUI.py:6010 flatcamTools/ToolDblSided.py:120
msgid "Mirror Axis:"
msgstr "Axe oglindire:"

#: flatcamGUI/FlatCAMGUI.py:6012 flatcamTools/ToolDblSided.py:122
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr "Oglindește vertical (X) sau orizontal (Y)."

#: flatcamGUI/FlatCAMGUI.py:6021 flatcamTools/ToolDblSided.py:131
msgid "Point"
msgstr "Punct"

#: flatcamGUI/FlatCAMGUI.py:6022 flatcamTools/ToolDblSided.py:132
msgid "Box"
msgstr "Forma"

#: flatcamGUI/FlatCAMGUI.py:6023 flatcamTools/ToolDblSided.py:133
msgid "Axis Ref:"
msgstr "Axa de ref.:"

#: flatcamGUI/FlatCAMGUI.py:6025
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a Geometry object) in \n"
"the middle."
msgstr ""
"Axa de referinţă ar trebui să treaca printr-un <b>punct</b> ori să strabata\n"
" o <b>forma</b> (specificata un obiect tip Geometrie) prin mijloc."

#: flatcamGUI/FlatCAMGUI.py:6041
msgid "Paint Tool Options"
msgstr "Opțiuni Unealta Paint"

#: flatcamGUI/FlatCAMGUI.py:6048 flatcamGUI/ObjectUI.py:1303
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."
msgstr ""
"Crează treceri taietoare pentru a acoperi\n"
"intreaga arie a unui poligon (pentru a indeparta\n"
"to cuprul, spre ex.). Când se actionează peste un\n"
"singur poligon se va cere să faceti click pe poligonul\n"
"dorit."

#: flatcamGUI/FlatCAMGUI.py:6072
msgid ""
"How much (fraction) of the tool\n"
"width to overlap each tool pass."
msgstr ""
"Cat de mult (o fracţie din diametrul uneltei) din diametrul uneltei,\n"
"(lăţimea de tăiere) să se suprapună peste trecerea anterioară."

#: flatcamGUI/FlatCAMGUI.py:6126 flatcamTools/ToolPaint.py:237
msgid "Selection:"
msgstr "Selecţie:"

#: flatcamGUI/FlatCAMGUI.py:6128
msgid "How to select the polygons to paint."
msgstr "Cum să se selecteze poligoanele de pictat (paint)."

#: flatcamGUI/FlatCAMGUI.py:6146
msgid "Film Tool Options"
msgstr "Opțiuni Unealta Film"

#: flatcamGUI/FlatCAMGUI.py:6151
msgid ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."
msgstr ""
"Crează un film PCB dintr-un obiect Gerber sau tip Geometrie.\n"
"Fişierul este salvat in format SVG."

#: flatcamGUI/FlatCAMGUI.py:6162 flatcamTools/ToolFilm.py:116
msgid "Film Type:"
msgstr "Tip film:"

#: flatcamGUI/FlatCAMGUI.py:6164 flatcamTools/ToolFilm.py:118
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""
"Generează un film negru Pozitiv sau un film Negativ.\n"
"Pozitiv = traseele vor fi negre pe un fundal alb.\n"
"Negativ = traseele vor fi albe pe un fundal negru.\n"
"Formatul fişierului pt filmul salvat este SVG."

#: flatcamGUI/FlatCAMGUI.py:6175 flatcamTools/ToolFilm.py:130
msgid "Border:"
msgstr "Bordura:"

#: flatcamGUI/FlatCAMGUI.py:6177 flatcamTools/ToolFilm.py:132
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""
"Specifica o bordura de jur imprejurul obiectului.\n"
"Doar pt filmele negative.\n"
"Ajuta daca folosim in Obiect Forma acelasi obiect ca in Obiect Film.\n"
"Va crea o bara solida neagra in jurul printului efectiv permitand o\n"
"delimitare exacta"

#: flatcamGUI/FlatCAMGUI.py:6190 flatcamTools/ToolFilm.py:144
msgid "Scale Stroke:"
msgstr "Scalează:"

#: flatcamGUI/FlatCAMGUI.py:6192 flatcamTools/ToolFilm.py:146
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""
"Scalează grosimea conturului fiecarui element din fişierul SVG.\n"
"Elementele mai mici vor fi afectate mai mult."

#: flatcamGUI/FlatCAMGUI.py:6207
msgid "Panelize Tool Options"
msgstr "Opțiuni Unealta Panelizare"

#: flatcamGUI/FlatCAMGUI.py:6212
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""
"Crează un obiect care contine o arie de (linii, coloane) elemente,\n"
"unde fiecare element este o copie a obiectului sursa, separat la o\n"
"distanţă X, Y unul de celalalt."

#: flatcamGUI/FlatCAMGUI.py:6223 flatcamTools/ToolPanelize.py:147
msgid "Spacing cols:"
msgstr "Sep. coloane:"

#: flatcamGUI/FlatCAMGUI.py:6225 flatcamTools/ToolPanelize.py:149
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""
"Spatiul de separare între coloane.\n"
"In unitatile curente."

#: flatcamGUI/FlatCAMGUI.py:6233 flatcamTools/ToolPanelize.py:156
msgid "Spacing rows:"
msgstr "Sep. linii:"

#: flatcamGUI/FlatCAMGUI.py:6235 flatcamTools/ToolPanelize.py:158
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""
"Spatiul de separare între linii.\n"
"In unitatile curente."

#: flatcamGUI/FlatCAMGUI.py:6243 flatcamTools/ToolPanelize.py:165
msgid "Columns:"
msgstr "Coloane:"

#: flatcamGUI/FlatCAMGUI.py:6245 flatcamTools/ToolPanelize.py:167
msgid "Number of columns of the desired panel"
msgstr "Numărul de coloane ale panel-ului dorit."

#: flatcamGUI/FlatCAMGUI.py:6252 flatcamTools/ToolPanelize.py:173
msgid "Rows:"
msgstr "Linii:"

#: flatcamGUI/FlatCAMGUI.py:6254 flatcamTools/ToolPanelize.py:175
msgid "Number of rows of the desired panel"
msgstr "Numărul de linii ale panel-ului dorit."

#: flatcamGUI/FlatCAMGUI.py:6260 flatcamTools/ToolPanelize.py:181
msgid "Gerber"
msgstr "Gerber"

#: flatcamGUI/FlatCAMGUI.py:6261 flatcamTools/ToolPanelize.py:182
msgid "Geo"
msgstr "Geo"

#: flatcamGUI/FlatCAMGUI.py:6262
msgid "Panel Type:"
msgstr "Tip panel:"

#: flatcamGUI/FlatCAMGUI.py:6264
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""
"Alege tipul obiectului panel:\n"
"- Gerber\n"
"- Geometrie"

#: flatcamGUI/FlatCAMGUI.py:6273
msgid "Constrain within:"
msgstr "Constrange:"

#: flatcamGUI/FlatCAMGUI.py:6275 flatcamTools/ToolPanelize.py:195
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""
"Arie definita de Dx și Dy in care se constrange panel-ul.\n"
"Dx și Dy sunt valori in unitati curente.\n"
"Indiferent de cat de multe coloane și/sau linii sunt selectate mai sus\n"
"panelul final va contine numai acel număr de linii/coloane care se inscrie\n"
"complet in aria desemnata."

#: flatcamGUI/FlatCAMGUI.py:6284 flatcamTools/ToolPanelize.py:204
msgid "Width (DX):"
msgstr "Latime (Dx):"

#: flatcamGUI/FlatCAMGUI.py:6286 flatcamTools/ToolPanelize.py:206
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""
"Lăţimea (Dx) in care panelul trebuie să se inscrie.\n"
"In unitati curente."

#: flatcamGUI/FlatCAMGUI.py:6293 flatcamTools/ToolPanelize.py:212
msgid "Height (DY):"
msgstr "Inaltime (Dy):"

#: flatcamGUI/FlatCAMGUI.py:6295 flatcamTools/ToolPanelize.py:214
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""
"Înălţimea (Dy) in care panelul trebuie să se inscrie.\n"
"In unitati curente."

#: flatcamGUI/FlatCAMGUI.py:6309
msgid "Calculators Tool Options"
msgstr "Opțiuni Unealta Calculatoare"

#: flatcamGUI/FlatCAMGUI.py:6312
msgid "<b>V-Shape Tool Calculator:</b>"
msgstr "<b>Calculator: Unealta V-shape</b>"

#: flatcamGUI/FlatCAMGUI.py:6314
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""
"Calculează diametrul pentru o unealtă V-Shape data,\n"
"avand diametrul vârfului și unghiul la vârf cat și\n"
"adâncimea de tăiere, ca parametri."

#: flatcamGUI/FlatCAMGUI.py:6325 flatcamTools/ToolCalculators.py:92
msgid "Tip Diameter:"
msgstr "Dia vârf:"

#: flatcamGUI/FlatCAMGUI.py:6327
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""
"Acesta este diametrul la vârf al uneltei.\n"
"Este specificat de producator."

#: flatcamGUI/FlatCAMGUI.py:6335
msgid "Tip angle:"
msgstr "Unghiul la vârf:"

#: flatcamGUI/FlatCAMGUI.py:6337
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"Acesta este unghiul la vârf al uneltei.\n"
"Este specificat de producator."

#: flatcamGUI/FlatCAMGUI.py:6347
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""
"Aceasta este adâncimea la care se taie in material.\n"
"In obiectul CNCJob este parametrul >Z tăiere<."

#: flatcamGUI/FlatCAMGUI.py:6354
msgid "<b>ElectroPlating Calculator:</b>"
msgstr "<b>Calculator Electroplacare:</b>"

#: flatcamGUI/FlatCAMGUI.py:6356 flatcamTools/ToolCalculators.py:148
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."
msgstr ""
"Acest calculator este util pentru aceia care plachează găuri/vias\n"
"folosind o metoda cum ar fi:\n"
"- cerneala grafitate (carbon)\n"
"- clorura paladiu\n"
"- hipofosfit de calciu"

#: flatcamGUI/FlatCAMGUI.py:6366 flatcamTools/ToolCalculators.py:157
msgid "Board Length:"
msgstr "Lung. placii:"

#: flatcamGUI/FlatCAMGUI.py:6368 flatcamTools/ToolCalculators.py:161
msgid "This is the board length. In centimeters."
msgstr ""
"Aceasta este lungimea PCB-ului.\n"
"In centimetri. "

#: flatcamGUI/FlatCAMGUI.py:6374 flatcamTools/ToolCalculators.py:163
msgid "Board Width:"
msgstr "Lat. placii:"

#: flatcamGUI/FlatCAMGUI.py:6376 flatcamTools/ToolCalculators.py:167
msgid "This is the board width.In centimeters."
msgstr ""
"Aceasta este lăţimea PCB-ului.\n"
"In centimetri. "

#: flatcamGUI/FlatCAMGUI.py:6381 flatcamTools/ToolCalculators.py:169
msgid "Current Density:"
msgstr "Densitate I:"

#: flatcamGUI/FlatCAMGUI.py:6384 flatcamTools/ToolCalculators.py:173
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""
"Densitatea de curent care să treaca prin placa.\n"
"In ASF (amperi pe picior la patrat)."

#: flatcamGUI/FlatCAMGUI.py:6390 flatcamTools/ToolCalculators.py:176
msgid "Copper Growth:"
msgstr "Grosime Cu:"

#: flatcamGUI/FlatCAMGUI.py:6393 flatcamTools/ToolCalculators.py:180
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""
"Cat de gros se dorește să fie stratul de cupru depus.\n"
"In microni."

#: flatcamGUI/FlatCAMGUI.py:6406
msgid "Transform Tool Options"
msgstr "Opțiuni Unealta Transformare"

#: flatcamGUI/FlatCAMGUI.py:6411
msgid ""
"Various transformations that can be applied\n"
"on a FlatCAM object."
msgstr ""
"Diverse transformări care pot fi aplicate\n"
"asupra unui obiect FlatCAM. Cum ar fi:\n"
"- rotaţie,\n"
"- scalare,\n"
"- ofset,\n"
"- deformare\n"
"- oglindire"

#: flatcamGUI/FlatCAMGUI.py:6421
msgid "Rotate Angle:"
msgstr "Unghi Rotaţie:"

#: flatcamGUI/FlatCAMGUI.py:6423
msgid "Angle for rotation. In degrees."
msgstr "Unnghiul pentru rotaţie. In grade."

#: flatcamGUI/FlatCAMGUI.py:6430
msgid "Skew_X angle:"
msgstr "Unghi Deform_X:"

#: flatcamGUI/FlatCAMGUI.py:6432
msgid "Angle for Skew/Shear on X axis. In degrees."
msgstr "Unghiul pentru deformare pe axa X. In grade."

#: flatcamGUI/FlatCAMGUI.py:6439
msgid "Skew_Y angle:"
msgstr "Unghi Deform_Y:"

#: flatcamGUI/FlatCAMGUI.py:6441
msgid "Angle for Skew/Shear on Y axis. In degrees."
msgstr "Unghiul pentru deformare pe axa Y. In grade."

#: flatcamGUI/FlatCAMGUI.py:6448
msgid "Scale_X factor:"
msgstr "Factor Scal_X:"

#: flatcamGUI/FlatCAMGUI.py:6450
msgid "Factor for scaling on X axis."
msgstr "Factor de scalare pe axa X."

#: flatcamGUI/FlatCAMGUI.py:6457
msgid "Scale_Y factor:"
msgstr "Factor Scal_Y:"

#: flatcamGUI/FlatCAMGUI.py:6459
msgid "Factor for scaling on Y axis."
msgstr "Factor de scalare pe axa Y."

#: flatcamGUI/FlatCAMGUI.py:6467
msgid ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."
msgstr ""
"Scalează obiectele selectate folosind\n"
"Factor Scal_X pentru ambele axe."

#: flatcamGUI/FlatCAMGUI.py:6475 flatcamTools/ToolTransform.py:210
msgid ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."
msgstr ""
"Scalează obiectele selectate folosind\n"
"originea ca referinţă atunci când este bifat.\n"
"Când nu este bifat, foloseşte ca referinţă\n"
"centrul formei inconjuatoare care cuprinde\n"
"toate obiectele selectate."

#: flatcamGUI/FlatCAMGUI.py:6484
msgid "Offset_X val:"
msgstr "Ofset_X:"

#: flatcamGUI/FlatCAMGUI.py:6486
msgid "Distance to offset on X axis. In current units."
msgstr "Distanta la care se face ofset pe axa X. In unitatile curente."

#: flatcamGUI/FlatCAMGUI.py:6493
msgid "Offset_Y val:"
msgstr "Ofset_Y:"

#: flatcamGUI/FlatCAMGUI.py:6495
msgid "Distance to offset on Y axis. In current units."
msgstr "Distanta la care se face ofset pe axa Y. In unitatile curente."

#: flatcamGUI/FlatCAMGUI.py:6501
msgid "Mirror Reference"
msgstr "Referinţă Oglindire"

#: flatcamGUI/FlatCAMGUI.py:6503 flatcamTools/ToolTransform.py:314
msgid ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Oglindește obiectele selectate in jurul punctului\n"
"de referinţă.\n"
"\n"
"Coordonatele punctului se pot obtine prin click pe \n"
"canvas simultan cu apasarea tastei SHIFT.\n"
"Apoi apasa pe butonul >Adaugă< pentru a insera\n"
"coordonatele.\n"
"Alternativ se pot introduce coordonatele manual,\n"
"in forma (x, y).\n"
"La final apasa butonul de oglindire pe axa dorita. "

#: flatcamGUI/FlatCAMGUI.py:6514
msgid " Mirror Ref. Point:"
msgstr "Pt. Ref. Oglindire:"

#: flatcamGUI/FlatCAMGUI.py:6516 flatcamTools/ToolTransform.py:327
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"
msgstr ""
"Coordonatele in format (x, y) ale punctului de referinţă pentru\n"
"oglindire.\n"
"X din (x,y) se va folosi când se face oglindirea pe axa X\n"
"Y din (x,y) se va folosi când se face oglindirea pe axa Y."

#: flatcamGUI/FlatCAMGUI.py:6533
msgid "SolderPaste Tool Options"
msgstr "Opțiuni Unealta Pasta Fludor"

#: flatcamGUI/FlatCAMGUI.py:6538
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""
"O unealtă care crează cod G-Code pentru dispensarea de pastă de fludor\n"
"pe padurile unui PCB."

#: flatcamGUI/FlatCAMGUI.py:6549
msgid "Diameters of nozzle tools, separated by ','"
msgstr "Diametrele uneltelor (nozzle), separate prin virgula."

#: flatcamGUI/FlatCAMGUI.py:6556
msgid "<b>New Nozzle Dia:</b>"
msgstr "<b>Nou Dia::</b>"

#: flatcamGUI/FlatCAMGUI.py:6558 flatcamTools/ToolSolderPaste.py:103
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr ""
"Valoarea pentru diametrul unei noi unelte (nozzle) pentru adaugare in Tabela "
"de Unelte"

#: flatcamGUI/FlatCAMGUI.py:6566 flatcamTools/ToolSolderPaste.py:166
msgid "Z Dispense Start:"
msgstr "Z start disp.:"

#: flatcamGUI/FlatCAMGUI.py:6568 flatcamTools/ToolSolderPaste.py:168
msgid "The height (Z) when solder paste dispensing starts."
msgstr "Înălţimea (Z) când incepe dispensarea de pastă de fludor."

#: flatcamGUI/FlatCAMGUI.py:6575 flatcamTools/ToolSolderPaste.py:174
msgid "Z Dispense:"
msgstr "Z disp.:"

#: flatcamGUI/FlatCAMGUI.py:6577 flatcamTools/ToolSolderPaste.py:176
msgid "The height (Z) when doing solder paste dispensing."
msgstr "Înălţimea (Z) in timp ce se face dispensarea de pastă de fludor."

#: flatcamGUI/FlatCAMGUI.py:6584 flatcamTools/ToolSolderPaste.py:182
msgid "Z Dispense Stop:"
msgstr "Z stop disp.:"

#: flatcamGUI/FlatCAMGUI.py:6586 flatcamTools/ToolSolderPaste.py:184
msgid "The height (Z) when solder paste dispensing stops."
msgstr "Înălţimea (Z) când se opreste dispensarea de pastă de fludor."

#: flatcamGUI/FlatCAMGUI.py:6593 flatcamTools/ToolSolderPaste.py:190
msgid "Z Travel:"
msgstr "Z deplasare:"

#: flatcamGUI/FlatCAMGUI.py:6595 flatcamTools/ToolSolderPaste.py:192
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""
"Înălţimea (Z) când se face deplasare între pad-uri.\n"
"(fără dispensare de pastă de fludor)."

#: flatcamGUI/FlatCAMGUI.py:6603 flatcamTools/ToolSolderPaste.py:199
msgid "Z Toolchange:"
msgstr "Z schimb. unealtă:"

#: flatcamGUI/FlatCAMGUI.py:6605 flatcamTools/ToolSolderPaste.py:201
msgid "The height (Z) for tool (nozzle) change."
msgstr "Înălţimea (Z) când se schimbă unealta (nozzle-ul)."

#: flatcamGUI/FlatCAMGUI.py:6612 flatcamTools/ToolSolderPaste.py:207
msgid "XY Toolchange:"
msgstr "XY schimb unealtă:"

#: flatcamGUI/FlatCAMGUI.py:6614 flatcamTools/ToolSolderPaste.py:209
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""
"Coordonatele X, Y pentru schimbarea uneltei (nozzle).\n"
"Formatul este (x,y) unde x și y sunt numere Reale."

#: flatcamGUI/FlatCAMGUI.py:6622 flatcamTools/ToolSolderPaste.py:216
msgid "Feedrate X-Y:"
msgstr "Feedrate X-Y:"

#: flatcamGUI/FlatCAMGUI.py:6624 flatcamTools/ToolSolderPaste.py:218
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr "Viteza de deplasare a uneltei când se deplasează in planul X-Y."

#: flatcamGUI/FlatCAMGUI.py:6631 flatcamTools/ToolSolderPaste.py:224
msgid "Feedrate Z:"
msgstr "Feedrate Z:"

#: flatcamGUI/FlatCAMGUI.py:6633 flatcamTools/ToolSolderPaste.py:226
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""
"Viteza de deplasare a uneltei când se misca in plan vertical (planul Z)."

#: flatcamGUI/FlatCAMGUI.py:6641 flatcamTools/ToolSolderPaste.py:233
msgid "Feedrate Z Dispense:"
msgstr "Feedrate Z disp.:"

#: flatcamGUI/FlatCAMGUI.py:6643
msgid ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."
msgstr ""
"Viteza de deplasare la mișcarea pe verticala spre\n"
"poziţia de dispensare (in planul Z)."

#: flatcamGUI/FlatCAMGUI.py:6651 flatcamTools/ToolSolderPaste.py:242
msgid "Spindle Speed FWD:"
msgstr "Viteza motor inainte:"

#: flatcamGUI/FlatCAMGUI.py:6653 flatcamTools/ToolSolderPaste.py:244
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""
"Viteza motorului de dispensare in timp ce impinge pastă de fludor\n"
"prin orificiul uneltei de dispensare."

#: flatcamGUI/FlatCAMGUI.py:6661 flatcamTools/ToolSolderPaste.py:251
msgid "Dwell FWD:"
msgstr "Pauza dupa disp.:"

#: flatcamGUI/FlatCAMGUI.py:6663 flatcamTools/ToolSolderPaste.py:253
msgid "Pause after solder dispensing."
msgstr "Pauza dupa dispensarea de pastă de fludor."

#: flatcamGUI/FlatCAMGUI.py:6670 flatcamTools/ToolSolderPaste.py:259
msgid "Spindle Speed REV:"
msgstr "Viteza motor inapoi:"

#: flatcamGUI/FlatCAMGUI.py:6672 flatcamTools/ToolSolderPaste.py:261
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""
"Viteza motorului de dispensare in timp ce retrage pasta de fludor\n"
"prin orificiul uneltei de dispensare."

#: flatcamGUI/FlatCAMGUI.py:6680 flatcamTools/ToolSolderPaste.py:268
msgid "Dwell REV:"
msgstr "Pauza dupa rev:"

#: flatcamGUI/FlatCAMGUI.py:6682 flatcamTools/ToolSolderPaste.py:270
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""
"Pauza dupa ce pasta de fludor a fost retrasă,\n"
"necesară pt a ajunge la un echilibru al presiunilor."

#: flatcamGUI/FlatCAMGUI.py:6689 flatcamTools/ToolSolderPaste.py:276
msgid "PostProcessors:"
msgstr "Postprocesoare:"

#: flatcamGUI/FlatCAMGUI.py:6691 flatcamTools/ToolSolderPaste.py:278
msgid "Files that control the GCode generation."
msgstr "Fişiere care controlează generarea codului G-Code."

#: flatcamGUI/FlatCAMGUI.py:6721 flatcamGUI/FlatCAMGUI.py:6727
msgid "Idle."
msgstr "Inactiv."

#: flatcamGUI/FlatCAMGUI.py:6751
msgid "Application started ..."
msgstr "Aplicaţia a pornit ..."

#: flatcamGUI/FlatCAMGUI.py:6752
msgid "Hello!"
msgstr "Bună!"

#: flatcamGUI/ObjectUI.py:33
msgid "FlatCAM Object"
msgstr "Obiect FlatCAM"

#: flatcamGUI/ObjectUI.py:58
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""
"Modul Baza este potrivit pt incepatori. Multi parametri sunt\n"
"ascunsi de user in acest mod.\n"
"Modul Avansat face disponibili toti parametrii programului.\n"
"\n"
"Pt a schimba modul de lucru al aplicaţiei mergi in:\n"
"Edit -> Preferințe -> General și bifează:\n"
"butonul radio: >Nivel App<"

#: flatcamGUI/ObjectUI.py:79
msgid "<b>Scale:</b>"
msgstr "<b>Scalează:</b>"

#: flatcamGUI/ObjectUI.py:81
msgid "Change the size of the object."
msgstr "Schimbă dimensiunea obiectului."

#: flatcamGUI/ObjectUI.py:89
msgid "Factor:"
msgstr "Factor:"

#: flatcamGUI/ObjectUI.py:91
msgid ""
"Factor by which to multiply\n"
"geometric features of this object."
msgstr ""
"Factor cu care se multiplica \n"
"caracteristicile geometrice ale\n"
"acestui obiect."

#: flatcamGUI/ObjectUI.py:102
msgid "Perform scaling operation."
msgstr "Efectuează operatia de scalare."

#: flatcamGUI/ObjectUI.py:108
msgid "<b>Offset:</b>"
msgstr "<b>Ofset:</b>"

#: flatcamGUI/ObjectUI.py:110
msgid "Change the position of this object."
msgstr "Schimbă poziţia acestui obiect."

#: flatcamGUI/ObjectUI.py:117
msgid "Vector:"
msgstr "Vector:"

#: flatcamGUI/ObjectUI.py:119
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."
msgstr ""
"Valoare cu cat să se deplaseze obiectul\n"
"pe axele X și /sau Y in formatul (x,y)."

#: flatcamGUI/ObjectUI.py:129
msgid "Perform the offset operation."
msgstr "Efectuează operația de Ofset."

#: flatcamGUI/ObjectUI.py:143
msgid "Gerber Object"
msgstr "Obiect Gerber"

#: flatcamGUI/ObjectUI.py:182 flatcamGUI/ObjectUI.py:514
#: flatcamGUI/ObjectUI.py:836 flatcamGUI/ObjectUI.py:1379
msgid "<b>Name:</b>"
msgstr "<b>Nume:</b>"

#: flatcamGUI/ObjectUI.py:203
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Comută afișarea tabelei de aperturi Gerber.\n"
"Când se debifează, toate marcajele aperturilor\n"
"care sutn curent afisate, vor fi șterse."

#: flatcamGUI/ObjectUI.py:213
msgid "Mark All"
msgstr "Marc. Toate"

#: flatcamGUI/ObjectUI.py:215
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Când este bifat se vor afisa toate aperturile.\n"
"Când este debifat se vor șterge toate marcajele de aperturi."

#: flatcamGUI/ObjectUI.py:243
msgid "Mark the aperture instances on canvas."
msgstr "Marchează aperturile pe canvas."

#: flatcamGUI/ObjectUI.py:261
msgid ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."
msgstr ""
"Diametrul uneltei taietoare.\n"
"Daca se dorește să se aibă o trecere de izolaţie\n"
"in interiorul poligonului Gerber (traseu), foloseşte\n"
"o valoare negativă pt acest parametru."

#: flatcamGUI/ObjectUI.py:272
msgid "Passes:"
msgstr "Treceri:"

#: flatcamGUI/ObjectUI.py:306
msgid "Combine"
msgstr "Combina"

#: flatcamGUI/ObjectUI.py:322
msgid "<b>Generate Isolation Geometry:</b>"
msgstr "<b>Creează Geometrie de Izolare:</b>"

#: flatcamGUI/ObjectUI.py:324
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""
"Crează un obiect Geometrie cu treceri taietoare pentru\n"
"a efectua o izolare in afară, in interior sau pe ambele parti\n"
"ale obiectului.\n"
"Pt un Gerber >in afară< inseamna in exteriorul elem. Gerber\n"
"(traseu, zona etc) iar >in interior< inseamna efectiv in interiorul\n"
"acelui elem. Gerber (daca poate fi posibil)."

#: flatcamGUI/ObjectUI.py:343
msgid "FULL Geo"
msgstr "Geo Full"

#: flatcamGUI/ObjectUI.py:345
msgid ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."
msgstr ""
"Crează un obiect Geometrie pt izolare.\n"
"Contine atat geometriile exterioare cat și\n"
"pe cele interioare."

#: flatcamGUI/ObjectUI.py:354
msgid "Ext Geo"
msgstr "Geo Ext"

#: flatcamGUI/ObjectUI.py:356
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."
msgstr ""
"Crează obiectul Geometrie\n"
"pt izolare conținând doar\n"
"geometriile de exterior."

#: flatcamGUI/ObjectUI.py:363
msgid "Int Geo"
msgstr "Geo Int"

#: flatcamGUI/ObjectUI.py:365
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."
msgstr ""
"Crează obiectul Geometrie\n"
"pt izolare conținând doar\n"
"geometriile de interior."

#: flatcamGUI/ObjectUI.py:381
msgid "<b>Clear N-copper:</b>"
msgstr "<b>Curăță Non-Cu:</b>"

#: flatcamGUI/ObjectUI.py:391 flatcamTools/ToolNonCopperClear.py:240
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
"Crează un obiect Geometrie\n"
"pt rutare non-cupru (adica pt\n"
"curățare zone de cupru)."

#: flatcamGUI/ObjectUI.py:397
msgid "<b>Board cutout:</b>"
msgstr "<b>Decupare PCB:</b>"

#: flatcamGUI/ObjectUI.py:405 flatcamTools/ToolCutOut.py:328
msgid "Cutout Tool"
msgstr "Unealta Decupare"

#: flatcamGUI/ObjectUI.py:407
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
"Generează un obiect Geometrie\n"
"pt decuparea PCB."

#: flatcamGUI/ObjectUI.py:413
msgid "<b>Non-copper regions:</b>"
msgstr "<b>Regiuni fără Cu.:</b>"

#: flatcamGUI/ObjectUI.py:415
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""
"Crează poligoane acopering zonele fără\n"
"cupru de pe PCB. Echivalent cu inversul\n"
"obiectului sursa. Poate fi folosit pt a indeparta\n"
"cuprul din zona specificata."

#: flatcamGUI/ObjectUI.py:440 flatcamGUI/ObjectUI.py:471
msgid "Rounded Geo"
msgstr "Geo rotunjita"

#: flatcamGUI/ObjectUI.py:442
msgid "Resulting geometry will have rounded corners."
msgstr ""
"Obiectul Geometrie rezultat \n"
"va avea colțurile rotunjite."

#: flatcamGUI/ObjectUI.py:447 flatcamGUI/ObjectUI.py:481
#: flatcamTools/ToolCutOut.py:183 flatcamTools/ToolCutOut.py:203
#: flatcamTools/ToolCutOut.py:254 flatcamTools/ToolSolderPaste.py:127
msgid "Generate Geo"
msgstr "Crează Geo"

#: flatcamGUI/ObjectUI.py:453
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
"Generează un obiect tip Geometrie care va inconjura\n"
"obiectul Gerber. Forma patratica (rectangulara)."

#: flatcamGUI/ObjectUI.py:483
msgid "Generate the Geometry object."
msgstr "Generează obiectul Geometrie."

#: flatcamGUI/ObjectUI.py:494
msgid "Excellon Object"
msgstr "Obiect Excellon"

#: flatcamGUI/ObjectUI.py:505
msgid "Solid circles."
msgstr "Cercuri solide."

#: flatcamGUI/ObjectUI.py:533 flatcamGUI/ObjectUI.py:855
msgid "<b>Tools Table</b>"
msgstr "<b>Tabela Unelte</b>"

#: flatcamGUI/ObjectUI.py:553
msgid "Drills"
msgstr "Găuri"

#: flatcamGUI/ObjectUI.py:553
msgid "Slots"
msgstr "Sloturi"

#: flatcamGUI/ObjectUI.py:554
msgid "Offset Z"
msgstr "Ofset Z:"

#: flatcamGUI/ObjectUI.py:558
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code."
msgstr ""
"Acesta este numărul uneltei.\n"
"Când se foloseşte optiunea de pauza pt schimb unealtă,\n"
"la evenim. de schimb unealtă, va aparea sub forma T1, T2, etc\n"
"in codul masina CNC."

#: flatcamGUI/ObjectUI.py:562 flatcamGUI/ObjectUI.py:901
#: flatcamTools/ToolNonCopperClear.py:97 flatcamTools/ToolPaint.py:94
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
"Diametrul uneltei. Valoarea să (in unitati curente)\n"
"reprezinta lăţimea taieturii in material."

#: flatcamGUI/ObjectUI.py:565
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
"Numărul de găuri. Sunt găuri efectuate prin\n"
"operațiuni de găurire efectuate cu un burghiu."

#: flatcamGUI/ObjectUI.py:568
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
"Numărul de sloturi. Sunt găuri efectuate\n"
"prin op. de frezare cu o freza."

#: flatcamGUI/ObjectUI.py:575
msgid "Toggle display of the drills for the current tool."
msgstr "Comută afișarea găurilor pt unealta curentă."

#: flatcamGUI/ObjectUI.py:583
msgid ""
"Create a CNC Job object\n"
"for this drill object."
msgstr ""
"Crează un obiect CNCJob din\n"
"acest obiect."

#: flatcamGUI/ObjectUI.py:612 flatcamGUI/ObjectUI.py:1116
msgid "Tool change"
msgstr "Schimb unealtă"

#: flatcamGUI/ObjectUI.py:620 flatcamGUI/ObjectUI.py:1109
msgid "Tool change Z:"
msgstr "Z schimb unealtă:"

#: flatcamGUI/ObjectUI.py:622 flatcamGUI/ObjectUI.py:1112
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr "Înălţimea, pe axa Z,  pentru schimbul uneltei."

#: flatcamGUI/ObjectUI.py:633
msgid ""
"Tool height just before starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Înălţimea uneltei la inceputul lucrului.\n"
"Seterge aceasta valoare daca nu este folosita."

#: flatcamGUI/ObjectUI.py:643
msgid ""
"Z-axis position (height) for\n"
"the last move."
msgstr "Înălţimea, pe axa Z, la finalul lucrului."

#: flatcamGUI/ObjectUI.py:651
msgid "Feedrate (Plunge):"
msgstr "Feedrate (Plonjare):"

#: flatcamGUI/ObjectUI.py:653
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for linear move G01."
msgstr ""
"Viteza uneltei când se face găuriea\n"
"(in unitati pe minut).\n"
"Aceasta este mișcarea lineara G01."

#: flatcamGUI/ObjectUI.py:706
msgid ""
"The json file that dictates\n"
"gcode output."
msgstr ""
"Fişierul care dictează codul G-Code \n"
"generat. In format JSON."

#: flatcamGUI/ObjectUI.py:738
msgid ""
"Select from the Tools Table above\n"
"the tools you want to include."
msgstr ""
"Selectează din Tabela de Unelte de mai sus,\n"
"uneltele care trebuie incluse."

#: flatcamGUI/ObjectUI.py:745
msgid "<b>Type:    </b>"
msgstr "<b>Tip:</b>"

#: flatcamGUI/ObjectUI.py:747
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."
msgstr ""
"Alege ce să folosești pentru generarea de G-Code:\n"
"- Găuri\n"
"- Sloturi\n"
"- Ambele\n"
"Când se alege >Sloturi< sau >Ambele<, sloturile\n"
"vor fi convertite intr-o serie de găuriri."

#: flatcamGUI/ObjectUI.py:762
msgid "Create GCode"
msgstr "Crează GCode"

#: flatcamGUI/ObjectUI.py:764
msgid "Generate the CNC Job."
msgstr "Generează un obiect CNCJob."

#: flatcamGUI/ObjectUI.py:776
msgid ""
"Select from the Tools Table above\n"
" the hole dias that are to be milled."
msgstr ""
"Selecteaa din Tabela de Unelte de mai sus\n"
"acele găuri care vor fi frezate."

#: flatcamGUI/ObjectUI.py:783
msgid "Drills Tool dia:"
msgstr "Dia. Burghiu:"

#: flatcamGUI/ObjectUI.py:790
msgid "Mill Drills Geo"
msgstr "Geo pt frezare găuri"

#: flatcamGUI/ObjectUI.py:792
msgid ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."
msgstr ""
"Crează un obiect tip Geometrie pt.\n"
"frezarea rutelor create din Găuri."

#: flatcamGUI/ObjectUI.py:799
msgid "Slots Tool dia:"
msgstr "Dia freza:"

#: flatcamGUI/ObjectUI.py:806
msgid "Mill Slots Geo"
msgstr "Geo pt. frezare sloturi"

#: flatcamGUI/ObjectUI.py:808
msgid ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."
msgstr ""
"Crează un obiect tip Geometrie pt.\n"
"frezarea rutelor create din Sloturi."

#: flatcamGUI/ObjectUI.py:826
msgid "Geometry Object"
msgstr "Obiect Geometrie"

#: flatcamGUI/ObjectUI.py:857
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
"Uneltele din acest obiect Geometrie folosit pentru tăiere.\n"
"Intrarea >Ofset< va seta un ofset pentru tăiere.\n"
"Acesta poate fi Inauntru, In afară, Pe cale și Personalizat.\n"
"Intrarea >Tip< este doar informativa și permite să stim intenția\n"
"pentru care folosim unealta aleasă.\n"
"Poate să fie Grosier, Finisare și Izolaţie.\n"
"Intrarea >Tip unealta< (TU) poate fi: Circular (cu unul sau mai\n"
"multi dinti C1 ...C4), rotunda (B) sau cu vârf V-Shape (V).\n"
"\n"
"Când V-shape este selectat atunci și >Tip< este automat setat \n"
"in 'Izolare', prametrul >Z tăiere< din UI este dezactivat (gri) pt că\n"
"este acum calculat automat din doi noi parametri care sunt afisati:\n"
"- V-Dia \n"
"- V-unghi"

#: flatcamGUI/ObjectUI.py:888 flatcamGUI/ObjectUI.py:1462
msgid "Dia"
msgstr "Dia"

#: flatcamGUI/ObjectUI.py:888 flatcamGUI/ObjectUI.py:1462
#: flatcamTools/ToolNonCopperClear.py:83 flatcamTools/ToolPaint.py:80
msgid "TT"
msgstr "TU"

#: flatcamGUI/ObjectUI.py:895
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
"Acesta este numărul uneltei.\n"
"Când se foloseşte optiunea de pauza pt schimb unealtă,\n"
"la evenim. de schimb unealtă, va aparea sub forma T1, T2, etc\n"
"in codul masina CNC."

#: flatcamGUI/ObjectUI.py:906
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
"Valorile pt Ofset pot fi:\n"
"- Pe cale -> Ofsetul este zero, tăietura va fi efectuatat pe linia "
"geometrică\n"
"- În(ăuntru) -> Tăietura va urma geometria pe interior. Va crea un "
"'buzunar'\n"
"- Afară-> Tăietura va urma geometria pe exterior"

#: flatcamGUI/ObjectUI.py:913
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choosed based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."
msgstr ""
"Tipul (operaţiei efectuate cu unealta) are doar o valoare informativa. De "
"obicei\n"
"valorile din UI sunt alese bazate pe tipul operaţiei și acesta ne serveste "
"ca și\n"
"notificare. Poate să fie: Grosier, Finisare sau Izolare.\n"
"Grosier -> putem alege de ex un feedrate scazut și tăiere in mai multe "
"etape.\n"
"Finisare -> alegem un feedrate mai mare și tăiere dintr-o singură operaţie\n"
"Izolare -> avem nevoie de un feedrate scazut pt ca se foloseşte o freza cu "
"un\n"
"vârf fin, ascuțit."

#: flatcamGUI/ObjectUI.py:922
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."
msgstr ""
"Tipul Uneltei (TU) poate fi:\n"
"- Circular cu 1 ... 4 dinti -> are aspect informativ. Lăţimea de tăiere este "
"exact diametrul uneltei.\n"
"- Rotund (ball) -> val. informativa și face referinţă la tipul de freza "
"Ball\n"
"- V-Shape -> produce modificari in UI. Va dezactiva parametrul >Z tăiere< "
"deoarece acesta va fi\n"
"calculat automat din valorile >V-dia< și >V-unghi, parametri care sunt acum "
"afisati in UI, cat și din\n"
"lăţimea de tăiere in material care este de fapt valoarea diametrului "
"uneltei.\n"
"Alegerea tipului V-Shape (forma in V) va selecta automat Tipul de Operaţie "
"ca Izolare."

#: flatcamGUI/ObjectUI.py:934
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."
msgstr ""
"Coloana de afișare. Este vizibila doar pentru obiecte Geometrie de tip "
"MultiGeo, ceea ce inseamna că\n"
"obiectul stochează datele geometrice in variabilele unelte. \n"
"\n"
"ATENTIE: Pentru aceste obiecte, ștergerea unei unelte conduce automat și la "
"ștergerea \n"
"datelor geometrice asociate. Din checkbox-urile asociate, fiecarei unelte i "
"se poate activa/dezactiva\n"
"afișarea in canvas."

#: flatcamGUI/ObjectUI.py:947
msgid "Tool Offset:"
msgstr "Ofset unealtă:"

#: flatcamGUI/ObjectUI.py:950
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""
"Valoarea cu care se face ofset când tipul de ofset selectat\n"
"este >Ofset<. Aceasta valoare poate fi pozitivă pentru un ofset\n"
"in exterior sau poate fi negativă pentru un ofset in interior."

#: flatcamGUI/ObjectUI.py:973
msgid "<b>Tool Dia:</b>"
msgstr "<b>Dia unealtă:</b>"

#: flatcamGUI/ObjectUI.py:992 flatcamTools/ToolNonCopperClear.py:136
#: flatcamTools/ToolPaint.py:133
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Adaugă o noua unelata in Tabela de Unelte,\n"
"cu diametrul specificat mai sus."

#: flatcamGUI/ObjectUI.py:1000
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Copiază o selecţie de unelte in Tabela de Unelte prin\n"
"selectarea unei linii (sau mai multe) in Tabela de Unelte."

#: flatcamGUI/ObjectUI.py:1008
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Șterge o selecţie de unelte in Tabela de Unelte prin\n"
"selectarea unei linii (sau mai multe) in Tabela de Unelte."

#: flatcamGUI/ObjectUI.py:1024
msgid "<b>Tool Data</b>"
msgstr "<b>Date Unealtă</b>"

#: flatcamGUI/ObjectUI.py:1027
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
"Datele folosite pentru crearea codului GCode.\n"
"Fiecare unealtă stochează un subset de asemenea date."

#: flatcamGUI/ObjectUI.py:1037
msgid "V-Tip Dia:"
msgstr "V-dia:"

#: flatcamGUI/ObjectUI.py:1040
msgid "The tip diameter for V-Shape Tool"
msgstr ""
"Diametrul la vârf al uneltei tip V-Shape.\n"
"Forma in V."

#: flatcamGUI/ObjectUI.py:1048
msgid "V-Tip Angle:"
msgstr "V-unghi:"

#: flatcamGUI/ObjectUI.py:1051
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
"Unghiul la vârf pentru unealta tip V-Shape. \n"
"In grade."

#: flatcamGUI/ObjectUI.py:1072
msgid "Multi-Depth:"
msgstr "Multi-Pas:"

#: flatcamGUI/ObjectUI.py:1075
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached.\n"
"To the right, input the depth of \n"
"each pass (positive value)."
msgstr ""
"Foloseşte multiple treceri, rute, pentru\n"
"a limita adâncimea de tăiere pentru fiecare\n"
"trecere. Se va taie de multiple ori pana când\n"
"este atinsa valoarea param. >Z tăiere<.\n"
"In dreapta, introdu adâncimea de tăiere\n"
"pentru fiecare trecere (valoare pozitivă)."

#: flatcamGUI/ObjectUI.py:1088
msgid "Depth of each pass (positive)."
msgstr ""
"Adâncimea pentru fiecare trecere.\n"
"Valoare pozitivă, in unitatile curente."

#: flatcamGUI/ObjectUI.py:1119
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
"Include o secventa de schimb unealtă in \n"
"codul masina CNC. O pauza pentru schimbul\n"
"uneltei (M6)."

#: flatcamGUI/ObjectUI.py:1145
msgid ""
"This is the height (Z) at which the CNC\n"
"will go as the last move."
msgstr ""
"Aceasta este înălţimea Z, la care CNC-ul \n"
"va fi parcat la finalul de lucru."

#: flatcamGUI/ObjectUI.py:1166
msgid "Feed Rate Z (Plunge):"
msgstr "Feedrate Z (Plonjare):"

#: flatcamGUI/ObjectUI.py:1169
msgid ""
"Cutting speed in the Z\n"
"plane in units per minute"
msgstr ""
"Viteza de tăiere in planul Z.\n"
"In unitati pe minut."

#: flatcamGUI/ObjectUI.py:1178
msgid "Feed Rate Rapids:"
msgstr "Feedrate rapizi:"

#: flatcamGUI/ObjectUI.py:1181
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Viteza de găurire, in unitati pe minut.\n"
"Corespunde comenzii G0 și este utila doar pentru\n"
"printerul 3D Marlin, implicit când se foloseşte fişierul\n"
"postprocesor: Marlin. Ignora aceasta parametru in rest."

#: flatcamGUI/ObjectUI.py:1197
msgid "Cut over 1st pt"
msgstr "Re-tăiere 1-ul pt."

#: flatcamGUI/ObjectUI.py:1212
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."
msgstr ""
"Viteza motorului in RPM (optional).\n"
"Daca postprocesorul Laser este folosit,\n"
"valoarea să este puterea laserului."

#: flatcamGUI/ObjectUI.py:1241
msgid "PostProcessor:"
msgstr "Postprocesor:"

#: flatcamGUI/ObjectUI.py:1244
msgid ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
"Fişierul postprocesor care controlează generarea\n"
"codului masina CNC (GCode, RML, HPGL) care \n"
"mai apoi este salvat."

#: flatcamGUI/ObjectUI.py:1282
msgid ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Adaugă cel puțin o unealtă in Tabela de Unelte.\n"
"Click pe header pentru selectarea tuturora asu CTRL + LMB click\n"
"pentru o selecţie personalizata de unelte."

#: flatcamGUI/ObjectUI.py:1289
msgid "Generate"
msgstr "Generează"

#: flatcamGUI/ObjectUI.py:1292
msgid "Generate the CNC Job object."
msgstr "Generează un obiect CNCJob."

#: flatcamGUI/ObjectUI.py:1300
msgid "<b>Paint Area:</b>"
msgstr "<b>Unealta Paint</b>"

#: flatcamGUI/ObjectUI.py:1315
msgid "Launch Paint Tool in Tools Tab."
msgstr ""
"Lansează unealta FlatCAM numita Paint și\n"
"o instalează in Tab-ul Unealta."

#: flatcamGUI/ObjectUI.py:1332
msgid "CNC Job Object"
msgstr "Obiect CNCJob"

#: flatcamGUI/ObjectUI.py:1350
msgid "<b>Plot kind:</b>"
msgstr "<b>Afișare:</b>"

#: flatcamGUI/ObjectUI.py:1366
msgid "<b>Display Annotation:</b>"
msgstr "<b>Afișare notatii:</b>"

#: flatcamGUI/ObjectUI.py:1385
msgid "<b>Travelled dist.:</b>"
msgstr "<b>Distanta:</b>"

#: flatcamGUI/ObjectUI.py:1388 flatcamGUI/ObjectUI.py:1395
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
"Aceasta este distanţa totala parcursa in planul X-Y.\n"
"In unitatile curente."

#: flatcamGUI/ObjectUI.py:1426
msgid "<b>CNC Tools Table</b>"
msgstr "<b>Tabela Unelte CNC</b>"

#: flatcamGUI/ObjectUI.py:1429
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""
"Unelete folosite in acest obiect CNCJob pentru tăiere.\n"
"Diametrul uneltei este folosit pentru afișarea pe canvas.\n"
"Coloanele sunt:\n"
"- 'Ofset' -> poate fi in interior, in exterior, pe cale sau personalizat.\n"
"- 'Tipul' -> este doar informativ și poate fi: Grosier, Finisaj, Izolaţie\n"
"- 'Tipul uneltei' -> poate fi circular cu 1 ... 4 dinti, tip bila sau V-"
"Shape\n"
"(cu forma in V)."

#: flatcamGUI/ObjectUI.py:1463
msgid "P"
msgstr "P"

#: flatcamGUI/ObjectUI.py:1469
msgid "Update Plot"
msgstr "Actualiz. afișare"

#: flatcamGUI/ObjectUI.py:1471
msgid "Update the plot."
msgstr "Actualizează afișarea obiectelor."

#: flatcamGUI/ObjectUI.py:1478
msgid "<b>Export CNC Code:</b>"
msgstr "<b>Exporta codul masina CNC:</b>"

#: flatcamGUI/ObjectUI.py:1486
msgid "Prepend to CNC Code:"
msgstr "Adaugă la inceput in codul G-Code:"

#: flatcamGUI/ObjectUI.py:1489
msgid ""
"Type here any G-Code commands you would\n"
"like to add to the beginning of the generated file."
msgstr ""
"Plasează aici acele comenzi GCode care se dorește să fie\n"
"adaugate la inceputul codului masina CNC."

#: flatcamGUI/ObjectUI.py:1499
msgid "Append to CNC Code:"
msgstr "Adaugă la sfârşit in codul G-Code:"

#: flatcamGUI/ObjectUI.py:1523
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."
msgstr ""
"Plasează aici acele comenzi G-Code care se dorește să fie executate\n"
"atunci când evenimentul de tip Schimb Unealtă este intalnit.\n"
"Aceasta va constitui un Macro pentru schimbare unealtă.\n"
"Variabilele FlatCAM folosite aici sunt inconjurate de simbolul %.\n"
"\n"
"ATENTIE:\n"
"poate fi folosit doar cu un fişier postprocesor care contine "
"'toolchange_custom'\n"
"in numele sau."

#: flatcamGUI/ObjectUI.py:1571
msgid "z_cut = depth where to cut"
msgstr "z_cut = adâncimea de tăiere"

#: flatcamGUI/ObjectUI.py:1572
msgid "z_move = height where to travel"
msgstr "z_move = Înălţimea deplasare"

#: flatcamGUI/ObjectUI.py:1591
msgid "View CNC Code"
msgstr "Vizualiz. codul CNC"

#: flatcamGUI/ObjectUI.py:1594
msgid ""
"Opens TAB to view/modify/print G-Code\n"
"file."
msgstr ""
"Deschide un nou tab pentru a vizualiza, modifica\n"
"sau tipari codul G-Code."

#: flatcamGUI/ObjectUI.py:1600
msgid "Save CNC Code"
msgstr "Salvează codul CNC"

#: flatcamGUI/ObjectUI.py:1603
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
"Deshide o fereastra dialog pentru salvarea codului\n"
"G-Code intr-un fişier."

#: flatcamTools/ToolCalculators.py:24
msgid "Calculators"
msgstr "Calculatoare"

#: flatcamTools/ToolCalculators.py:25
msgid "V-Shape Tool Calculator"
msgstr "Calculator Unealta V-Shape"

#: flatcamTools/ToolCalculators.py:26
msgid "Units Calculator"
msgstr "Calculator Unitati"

#: flatcamTools/ToolCalculators.py:27
msgid "ElectroPlating Calculator"
msgstr "Calculator ElectroPlacare"

#: flatcamTools/ToolCalculators.py:68
msgid "Here you enter the value to be converted from INCH to MM"
msgstr "Valorile pentru conversie din INCH in MM"

#: flatcamTools/ToolCalculators.py:73
msgid "Here you enter the value to be converted from MM to INCH"
msgstr "Valorile pentru conversie din MM in INCH"

#: flatcamTools/ToolCalculators.py:96
msgid ""
"This is the diameter of the tool tip.\n"
"The manufacturer specifies it."
msgstr ""
"Acesta este diametrul uneltei la vârf.\n"
"Producatorul il specifica in foaia de catalog."

#: flatcamTools/ToolCalculators.py:99
msgid "Tip Angle:"
msgstr "V-Unghi:"

#: flatcamTools/ToolCalculators.py:103
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"Acesta este unghiul uneltei la vârf.\n"
"Producatorul il specifica in foaia de catalog."

#: flatcamTools/ToolCalculators.py:110
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""
"Acest param. este adâncimea de tăiere in material.\n"
"In obiectul CNCJob este parametrul >Z tăiere<."

#: flatcamTools/ToolCalculators.py:113
msgid "Tool Diameter:"
msgstr "Dia unealtă:"

#: flatcamTools/ToolCalculators.py:117
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""
"Acesta este diametrul uneltei care trebuie introdus in\n"
"sectiunea FlatCAM Gerber.\n"
"In sectiunea CNCJob este numit >Dia unealtă<."

#: flatcamTools/ToolCalculators.py:128 flatcamTools/ToolCalculators.py:209
msgid "Calculate"
msgstr "Calculează"

#: flatcamTools/ToolCalculators.py:131
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""
"Calculează ori valorea >Z tăiere< ori valoarea efectiva a diametrului "
"uneltei,\n"
"depinzand de care dintre acestea este cunoscuta."

#: flatcamTools/ToolCalculators.py:185
msgid "Current Value:"
msgstr "Intensitate:"

#: flatcamTools/ToolCalculators.py:189
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""
"Intensitatea curentului electric care se va seta\n"
"in sursa de alimentare. In Amperi."

#: flatcamTools/ToolCalculators.py:193
msgid "Time:"
msgstr "Durata:"

#: flatcamTools/ToolCalculators.py:197
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""
"TImpul necesar (calculat) pentru\n"
"efectuarea procedurii. In minute."

#: flatcamTools/ToolCalculators.py:212
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"
msgstr ""
"Calculează intensitatea curentului cat și durata procedurii\n"
"in funcţie de parametrii de mai sus."

#: flatcamTools/ToolCalculators.py:256
msgid "Calc. Tool"
msgstr "Unealta Calc."

#: flatcamTools/ToolCutOut.py:18
msgid "Cutout PCB"
msgstr "Decupare PCB"

#: flatcamTools/ToolCutOut.py:54
msgid "Obj Type:"
msgstr "Tip obiect:"

#: flatcamTools/ToolCutOut.py:56
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specifica obiectul care va fi decupat.\n"
"Poate fi de tip: Gerber sau Geometrie.\n"
"Ce se va selecta aici va controla tipul de \n"
"obiecte care vor aparea in combobox-ul\n"
"numit >Obiect<."

#: flatcamTools/ToolCutOut.py:70 flatcamTools/ToolPanelize.py:71
msgid "Object:"
msgstr "Obiect:"

#: flatcamTools/ToolCutOut.py:72
msgid "Object to be cutout.                        "
msgstr "Obiectul FlatCAM care va fi decupat."

#: flatcamTools/ToolCutOut.py:94
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""
"Diametrul uneltei folosita pt decuparea\n"
"PCB-ului din materialului inconjurator."

#: flatcamTools/ToolCutOut.py:103
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""
"Marginea (zona de siguranţă). O val. pozitivă\n"
"va face decuparea distanțat cu aceasta valoare \n"
"fata de PCB-ul efectiv."

#: flatcamTools/ToolCutOut.py:113
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""
"Dimenisunea punţilor in decupaj care servesc\n"
"in a mentine ataşat PCB-ul la materialul de unde \n"
"este decupat."

#: flatcamTools/ToolCutOut.py:132
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""
"Generează un obiect tip Geometrie care va inconjura\n"
"tot PCB-ul. Forma sa este convexa.\n"
"Se foloseste doar daca obiectul sursă este de tip Gerber."

#: flatcamTools/ToolCutOut.py:138
msgid "A. Automatic Bridge Gaps"
msgstr "A. Punţi realiz. automat"

#: flatcamTools/ToolCutOut.py:140
msgid "This section handle creation of automatic bridge gaps."
msgstr ""
"Aceasta sectiune va permite crearea in mod automat\n"
"a pana la 8 punţi."

#: flatcamTools/ToolCutOut.py:151
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Numărul de punţi folosite in decupare.\n"
"Pot fi un număr maxim de 8 punţi aranjate in felul\n"
"următor:\n"
"- lr = stânga -dreapta\n"
"- tb = sus - jos\n"
"- 4 = stânga -dreapta - sus - jos\n"
"- 2lr = 2* stânga - 2* dreapta\n"
"- 2tb = 2* sus - 2* jos\n"
"- 8 = 2* stânga - 2* dreapta - 2* sus - 2* jos"

#: flatcamTools/ToolCutOut.py:174
msgid "FreeForm:"
msgstr "Forma libera:"

#: flatcamTools/ToolCutOut.py:176
msgid ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Decupajul poate avea orice forma.\n"
"Folositor când PCB-ul are o forma neregulata."

#: flatcamTools/ToolCutOut.py:185
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Decupează obiectul selectat.\n"
"Forma decupajului poate avea orice forma.\n"
"Folositor când PCB-ul are o forma neregulata."

#: flatcamTools/ToolCutOut.py:194
msgid "Rectangular:"
msgstr "Patrulater:"

#: flatcamTools/ToolCutOut.py:196
msgid ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Forma decupajului va fi mereu de forma\n"
"patratica și va fi forma înconjurătoare a\n"
"obiectului FlatCAM decupat."

#: flatcamTools/ToolCutOut.py:205
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Decupează obiectul selectat.\n"
"Forma decupajului este tot timpul dreptunghiulara.."

#: flatcamTools/ToolCutOut.py:213
msgid "B. Manual Bridge Gaps"
msgstr "B. Punţi realiz. manual"

#: flatcamTools/ToolCutOut.py:215
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""
"Permite realizarea de punţi de sustinere in mod manual.\n"
"Se apasa butonul corepsunzator și apoi click cu mouse-ul\n"
"pe perimetrul formei de decupaj. Daca se face simultan cu\n"
"apasarea tastei CTRL, operatia se va repeta automat pana când\n"
"se va apasa tasta 'Escape'."

#: flatcamTools/ToolCutOut.py:231
msgid "Geo Obj:"
msgstr "Obiect Geo:"

#: flatcamTools/ToolCutOut.py:233
msgid "Geometry object used to create the manual cutout."
msgstr "Obiect tip Geometrie folosit pentru crearea decupajului manual."

#: flatcamTools/ToolCutOut.py:244
msgid "Manual Geo:"
msgstr "Geo manual:"

#: flatcamTools/ToolCutOut.py:246 flatcamTools/ToolCutOut.py:256
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""
"Daca obiectul care se decupează este un obiect Gerber,\n"
"atunci mai intai crează un obiect Geometrie care il inconjoara\n"
"urmărindu-i forma.\n"
"Selectează obiectul sursa Gerber in combobox-ul de mai sus,\n"
"numit >Obiect<."

#: flatcamTools/ToolCutOut.py:266
msgid "Manual Add Bridge Gaps:"
msgstr "Adaugă punţi manual:"

#: flatcamTools/ToolCutOut.py:268
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."
msgstr ""
"Folosind click LMB se crează punţi de sustinere a PCB-ului\n"
"de materialul din care este decupat."

#: flatcamTools/ToolCutOut.py:275
msgid "Generate Gap"
msgstr "Generează Punte"

#: flatcamTools/ToolCutOut.py:277
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""
"Permite realizarea de punţi de sustinere in mod manual.\n"
"Se apasa butonul corepsunzator și apoi click cu mouse-ul\n"
"pe perimetrul formei de decupaj. Daca se face simultan cu\n"
"apasarea tastei CTRL, operatia se va repeta automat pana când\n"
"se va apasa tasta 'Escape'."

#: flatcamTools/ToolCutOut.py:358 flatcamTools/ToolCutOut.py:552
#: flatcamTools/ToolNonCopperClear.py:669 flatcamTools/ToolPaint.py:768
#: flatcamTools/ToolPanelize.py:352 flatcamTools/ToolPanelize.py:366
#: flatcamTools/ToolSub.py:239 flatcamTools/ToolSub.py:252
#: flatcamTools/ToolSub.py:432 flatcamTools/ToolSub.py:445
#, python-format
msgid "[ERROR_NOTCL] Could not retrieve object: %s"
msgstr "[ERROR_NOTCL] Nu s-a putut incărca obiectul: %s"

#: flatcamTools/ToolCutOut.py:362
msgid ""
"[ERROR_NOTCL] There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"[ERROR_NOTCL] Nu este nici-un obiect selectat pentru decupaj.\n"
"Selectează unul și încearcă din nou."

#: flatcamTools/ToolCutOut.py:377
msgid ""
"[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
"number."
msgstr ""
"[WARNING_NOTCL] Diametrul uneltei este zero. Schimbă-l intr-o val. pozitivă "
"Reala."

#: flatcamTools/ToolCutOut.py:392 flatcamTools/ToolCutOut.py:585
#: flatcamTools/ToolCutOut.py:854
msgid ""
"[WARNING_NOTCL] Margin value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Valoarea marginii lipseste sau este in format gresit. Adaugă "
"din nou și reîncearcă."

#: flatcamTools/ToolCutOut.py:403 flatcamTools/ToolCutOut.py:596
#: flatcamTools/ToolCutOut.py:742
msgid ""
"[WARNING_NOTCL] Gap size value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Valoarea dimensiunii punte lipseste sau este in format "
"gresit. Adaugă din nou și reîncearcă."

#: flatcamTools/ToolCutOut.py:410 flatcamTools/ToolCutOut.py:603
msgid "[WARNING_NOTCL] Number of gaps value is missing. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Numărul de punţi lipseste sau este in format gresit. Adaugă "
"din nou și reîncearcă."

#: flatcamTools/ToolCutOut.py:414 flatcamTools/ToolCutOut.py:607
msgid ""
"[WARNING_NOTCL] Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 "
"or 8. Fill in a correct value and retry. "
msgstr ""
"[WARNING_NOTCL] Valoarea punţilor poate fi numai una dintre: 'lr', 'tb', "
"'2lr', '2tb', 4 or 8. Adaugă o valoare permisa și reîncearcă."

#: flatcamTools/ToolCutOut.py:419 flatcamTools/ToolCutOut.py:612
msgid ""
"[ERROR]Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."
msgstr ""
"[ERROR] Operatia de decupaj nu se poate efectua cu un obiect Geometrie tip "
"MultiGeo.\n"
"Se poate insa converti MultiGeo in tip SingleGeo și apoi se poate efectua "
"decupajul."

#: flatcamTools/ToolCutOut.py:535 flatcamTools/ToolCutOut.py:712
msgid "[success] Any form CutOut operation finished."
msgstr "[success] Operatia de decupaj cu forma libera s-a terminat."

#: flatcamTools/ToolCutOut.py:556 flatcamTools/ToolPaint.py:772
#: flatcamTools/ToolPanelize.py:358
#, python-format
msgid "[ERROR_NOTCL] Object not found: %s"
msgstr "[ERROR_NOTCL] Obiectul nu a fost gasit: %s"

#: flatcamTools/ToolCutOut.py:570 flatcamTools/ToolCutOut.py:732
#: flatcamTools/ToolCutOut.py:839
msgid ""
"[ERROR_NOTCL] Tool Diameter is zero value. Change it to a positive real "
"number."
msgstr ""
"[ERROR_NOTCL] Diametrul uneltei este zero. Schimbă intr-o valoare pozitivă "
"Reala."

#: flatcamTools/ToolCutOut.py:717
msgid ""
"Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""
"Click pe perimetrul obiectului tip Geometrie selectat\n"
"pentru a crea o punte separatoare."

#: flatcamTools/ToolCutOut.py:758
msgid "Making manual bridge gap..."
msgstr "Se generează o punte separatoare in mod manual..."

#: flatcamTools/ToolCutOut.py:782
#, python-format
msgid "[ERROR_NOTCL] Could not retrieve Geometry object: %s"
msgstr "[ERROR_NOTCL] Nu s-a putut incărca obiectul Geometrie: %s"

#: flatcamTools/ToolCutOut.py:786
#, python-format
msgid "[ERROR_NOTCL] Geometry object for manual cutout not found: %s"
msgstr ""
"[ERROR_NOTCL] Obiectul Geometrie pentru decupaj manual nu este gasit: %s"

#: flatcamTools/ToolCutOut.py:796
msgid "[success] Added manual Bridge Gap."
msgstr "[success] O punte a fost adăugată in mod manual."

#: flatcamTools/ToolCutOut.py:814
#, python-format
msgid "[ERROR_NOTCL] Could not retrieve Gerber object: %s"
msgstr "[ERROR_NOTCL] Nu s-a putut incărca obiectul Gerber: %s"

#: flatcamTools/ToolCutOut.py:818
msgid ""
"[ERROR_NOTCL] There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"[ERROR_NOTCL] Nu exista obiect selectat pt operatia de decupare.\n"
"Selecteaza unul si incearcă din nou."

#: flatcamTools/ToolCutOut.py:823
msgid ""
"[ERROR_NOTCL] The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""
"[ERROR_NOTCL] Obiectul selectat trebuie să fie de tip Gerber.\n"
"Selecteaza un obiect Gerber si incearcă din nou."

#: flatcamTools/ToolDblSided.py:18
msgid "2-Sided PCB"
msgstr "2-fețe PCB"

#: flatcamTools/ToolDblSided.py:47
msgid "<b>GERBER:</b>"
msgstr "<b>GERBER:</b>"

#: flatcamTools/ToolDblSided.py:52 flatcamTools/ToolDblSided.py:76
#: flatcamTools/ToolDblSided.py:100
msgid "Mirror"
msgstr "Oglindește"

#: flatcamTools/ToolDblSided.py:54 flatcamTools/ToolDblSided.py:78
#: flatcamTools/ToolDblSided.py:102
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""
"Oglindește obiectul specificat pe axa specificata.\n"
"Nu crează un obiect nou ci il modifica."

#: flatcamTools/ToolDblSided.py:71
msgid "<b>EXCELLON:</b>"
msgstr "<b>EXCELLON:</b>"

#: flatcamTools/ToolDblSided.py:73
msgid "Excellon Object to be mirrored."
msgstr "Obiectul Excellon care va fi oglindit."

#: flatcamTools/ToolDblSided.py:95
msgid "<b>GEOMETRY</b>:"
msgstr "<b>GEOMETRIE</b>:"

#: flatcamTools/ToolDblSided.py:97
msgid "Geometry Obj to be mirrored."
msgstr "Obiectul Geometrie care va fi oglindit."

#: flatcamTools/ToolDblSided.py:135
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."
msgstr ""
"Axa de referinţă ar trebui să treacă printr-un <b>punct</b> ori să strabata\n"
" o <b>forma</b> (obiect FlatCAM) prin mijloc."

#: flatcamTools/ToolDblSided.py:152
msgid "Point/Box Reference:"
msgstr "Referința Punct/ Container:"

#: flatcamTools/ToolDblSided.py:154
msgid ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."
msgstr ""
"Daca 'Punct' este selectat mai sus, atunci va stoca coordonatele (x,y) prin "
"care\n"
"axa de oglindire trece.\n"
"Daca 'Container' este selectat mai sus atunci va fi disponibila aici o lista "
"de obiecte\n"
"FlatCAM: Gerber, Excellon sau Geometrie. Prin mijocul geometric al acestor "
"obiecte\n"
"va trece axa de oglindire selectată mai sus."

#: flatcamTools/ToolDblSided.py:162
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."
msgstr ""
"Adaugă coordonatele in formatul <b>(x, y)</b> ale punctului prin care trece\n"
"axa de oglindire selectată mai sus.\n"
"Coordonatele (x,y) pot fi obtinute prin combinatia tasta SHIFT + click mouse "
"pe\n"
"canvas sau le puteti introduce manual."

#: flatcamTools/ToolDblSided.py:182
msgid "Gerber   Reference Box Object"
msgstr "Obiectul container al Gerber de referinţă"

#: flatcamTools/ToolDblSided.py:183
msgid "Excellon Reference Box Object"
msgstr "Obiectul container al Excellon de referinţă"

#: flatcamTools/ToolDblSided.py:184
msgid "Geometry Reference Box Object"
msgstr "Obiectul container al Geo de referinţă"

#: flatcamTools/ToolDblSided.py:192
msgid "Alignment Drill Coordinates:"
msgstr "Dia. găuri de aliniere"

#: flatcamTools/ToolDblSided.py:194
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."
msgstr ""
"Găuri de aliniere in formatul unei liste: (x1, y1), (x2, y2) samd.\n"
"Pentru fiecare punct din lista de mai sus (cu coord. (x,y) )\n"
"un alt punct va fi creat in oglinda.\n"
"- un punct cu coord. specificate\n"
"- un punct cu coord. in poziţia oglindita pe axa selectată mai sus"

#: flatcamTools/ToolDblSided.py:209
msgid ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""
"Adăugă coordonatele pt găurile de aliniere in formatul: (x1,y1), (x2,y2) "
"samd\n"
"\n"
"Coordonatele pot fi obtinute prin urmatoarele metoda:\n"
"- apasare tasta SHIFT + click mouse pe canvas. Apoi apasa butonul 'Adaugă'.\n"
"- apasare tasta SHIFT + click mouse pe canvas. Apoi CTRL + V combo in câmpul "
"de editare\n"
"- apasare tasta SHIFT + click mouse pe canvas. Apoi click dreapta și Paste "
"in câmpul de edit.\n"
"- se intorduc manual in formatul (x1,y1), (x2,y2) ..."

#: flatcamTools/ToolDblSided.py:223
msgid "Alignment Drill Diameter"
msgstr "Dia. găuri de aliniere"

#: flatcamTools/ToolDblSided.py:246
msgid "Create Excellon Object"
msgstr "Crează un obiect Excellon."

#: flatcamTools/ToolDblSided.py:248
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""
"Crează un obiect Excellon care contine găurile\n"
"de aliniere specificate cat și cele in oglinda."

#: flatcamTools/ToolDblSided.py:254
msgid "Reset"
msgstr "Reset"

#: flatcamTools/ToolDblSided.py:256
msgid "Resets all the fields."
msgstr "Resetează toate câmpurile cu informatii."

#: flatcamTools/ToolDblSided.py:301
msgid "2-Sided Tool"
msgstr "Unealta 2-fețe"

#: flatcamTools/ToolDblSided.py:326
msgid ""
"[WARNING_NOTCL] 'Point' reference is selected and 'Point' coordinates are "
"missing. Add them and retry."
msgstr ""
"[WARNING_NOTCL] Referința 'Punct' este selectată dar coordonatele sale "
"lipsesc. Adăugă-le is încearcă din nou."

#: flatcamTools/ToolDblSided.py:345
msgid ""
"[WARNING_NOTCL] There is no Box reference object loaded. Load one and retry."
msgstr ""
"[WARNING_NOTCL] Nici-un obiect container nu este incărcat. Încarcă unul și "
"încearcă din nou."

#: flatcamTools/ToolDblSided.py:367
msgid ""
"[WARNING_NOTCL] No value or wrong format in Drill Dia entry. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Val. pt dia burghiu lipseste sau este in format gresit. "
"Adaugă una și încearcă din nou."

#: flatcamTools/ToolDblSided.py:374
msgid ""
"[WARNING_NOTCL] There are no Alignment Drill Coordinates to use. Add them "
"and retry."
msgstr ""
"[WARNING_NOTCL] Nu exista coord. pentru găurile de aliniere. Adaugă-le și "
"încearcă din nou."

#: flatcamTools/ToolDblSided.py:397
msgid "[success] Excellon object with alignment drills created..."
msgstr ""
"[success] Obiectul Excellon conținând găurile de aliniere a fost creat ..."

#: flatcamTools/ToolDblSided.py:406
msgid "[WARNING_NOTCL] There is no Gerber object loaded ..."
msgstr "[WARNING_NOTCL] Nu este nici-un obiect Gerber incărcat ..."

#: flatcamTools/ToolDblSided.py:410 flatcamTools/ToolDblSided.py:453
#: flatcamTools/ToolDblSided.py:497
msgid ""
"[ERROR_NOTCL] Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr ""
"[ERROR_NOTCL]Doar obiectele de tip Geometrie, Excellon și Gerber pot fi "
"oglindite ..."

#: flatcamTools/ToolDblSided.py:420
msgid ""
"[WARNING_NOTCL] 'Point' coordinates missing. Using Origin (0, 0) as "
"mirroring reference."
msgstr ""
"[WARNING_NOTCL] Coord. 'Punct'-ului lipsesc. Se folosesc coord. punctului "
"Origine (0,0) ca ref. pt oglindire."

#: flatcamTools/ToolDblSided.py:430 flatcamTools/ToolDblSided.py:474
#: flatcamTools/ToolDblSided.py:511
msgid "[WARNING_NOTCL] There is no Box object loaded ..."
msgstr "[WARNING_NOTCL] Nu este incărcat nici-un obiect container ..."

#: flatcamTools/ToolDblSided.py:440
#, python-format
msgid "[success] Gerber %s was mirrored..."
msgstr "[success]Obiectul Gerberr %s a fost oglindit..."

#: flatcamTools/ToolDblSided.py:449
msgid "[WARNING_NOTCL] There is no Excellon object loaded ..."
msgstr "[WARNING_NOTCL] Nici-un obiect tip Excellon nu este incărcat ..."

#: flatcamTools/ToolDblSided.py:464
msgid ""
"[WARNING_NOTCL] There are no Point coordinates in the Point field. Add "
"coords and try again ..."
msgstr ""
"[WARNING_NOTCL] Nu exista coord. in câmpul 'Punct'. Adaugă coord. și "
"încearcă din nou..."

#: flatcamTools/ToolDblSided.py:484
#, python-format
msgid "[success] Excellon %s was mirrored..."
msgstr "[success] Obiectul Excellon %s a fost oglindit..."

#: flatcamTools/ToolDblSided.py:493
msgid "[WARNING_NOTCL] There is no Geometry object loaded ..."
msgstr "[WARNING_NOTCL] Nici-un obiect tip Geometrie nu este incărcat ..."

#: flatcamTools/ToolDblSided.py:521
#, python-format
msgid "[success] Geometry %s was mirrored..."
msgstr "[success] Obiectul Geometrie %s a fost oglindit..."

#: flatcamTools/ToolFilm.py:25
msgid "Film PCB"
msgstr "Film PCB"

#: flatcamTools/ToolFilm.py:56 flatcamTools/ToolImage.py:53
#: flatcamTools/ToolPanelize.py:56
msgid "Object Type:"
msgstr "Tip Obiect:"

#: flatcamTools/ToolFilm.py:58
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""
"Specificati tipul de obiect pt care se va crea filmul.\n"
"Obiectul poate avea tipul: Gerber sau Geometrie.\n"
"Selectia facuta aici controlează ce obiecte vor fi \n"
"gasite in combobox-ul >Obiect Film<."

#: flatcamTools/ToolFilm.py:71
msgid "Film Object:"
msgstr "Obiect Film:"

#: flatcamTools/ToolFilm.py:73
msgid "Object for which to create the film."
msgstr "Obiectul pt care se crează filmul."

#: flatcamTools/ToolFilm.py:89 flatcamTools/ToolPanelize.py:111
msgid "Box Type:"
msgstr "Tip container:"

#: flatcamTools/ToolFilm.py:91
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specificati tipul obiectului care să fie folosit ca și container\n"
"pt crearea filmului. Poate fi de tipul Geometrie sau Gerber.\n"
"Selectia facuta aici controlează ce obiecte vor fi \n"
"gasite in combobox-ul >Container<."

#: flatcamTools/ToolFilm.py:104 flatcamTools/ToolPanelize.py:126
msgid "Box Object:"
msgstr "Container:"

#: flatcamTools/ToolFilm.py:106
msgid ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."
msgstr ""
"Obiectul care este folosit ca și container pentru crearea filmului.\n"
"De obicei este conturul PCB dar se poate folosi și obiectul pt care\n"
"se crează filmul."

#: flatcamTools/ToolFilm.py:114
msgid "Positive"
msgstr "Pozitiv"

#: flatcamTools/ToolFilm.py:115
msgid "Negative"
msgstr "Negativ"

#: flatcamTools/ToolFilm.py:157
msgid "Save Film"
msgstr "Salveaa filmul"

#: flatcamTools/ToolFilm.py:159
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."
msgstr ""
"Crează un film pt obiectul selectat, in cadrul obiectului\n"
"container selectat. Nu crează un obiect nou FlatCAM ci\n"
"salvează pe HDD un fişier in format SVG care poate fi \n"
"deschis și prelucrat mai departe cu Inkscape."

#: flatcamTools/ToolFilm.py:225
msgid ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Film and retry."
msgstr ""
"[ERROR_NOTCL] Nici-un obiect FlaCAM nu este selectat. Incărca un obiect pt "
"Film și încearcă din nou."

#: flatcamTools/ToolFilm.py:231
msgid ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Box and retry."
msgstr ""
"[ERROR_NOTCL] Nici-un obiect FlaCAM nu este selectat. Încarcă un obiect "
"container și încearcă din nou."

#: flatcamTools/ToolFilm.py:255
msgid "Generating Film ..."
msgstr "Se generează Film-ul ..."

#: flatcamTools/ToolFilm.py:260 flatcamTools/ToolFilm.py:264
msgid "Export SVG positive"
msgstr "Exporta SVG pozitiv"

#: flatcamTools/ToolFilm.py:269
msgid "[WARNING_NOTCL] Export SVG positive cancelled."
msgstr "[WARNING_NOTCL] Exportul unui fişier SVG pozitiv este anulat."

#: flatcamTools/ToolFilm.py:276 flatcamTools/ToolFilm.py:280
msgid "Export SVG negative"
msgstr "Exporta SVG negativ"

#: flatcamTools/ToolFilm.py:285
msgid "[WARNING_NOTCL] Export SVG negative cancelled."
msgstr "[WARNING_NOTCL] Exportul unui fişier SVG negativ este anulat."

#: flatcamTools/ToolImage.py:25
msgid "Image as Object"
msgstr "Imagine ca Obiect"

#: flatcamTools/ToolImage.py:31
msgid "Image to PCB"
msgstr "Imagine -> PCB"

#: flatcamTools/ToolImage.py:55
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""
"Specifica tipul de obiect care se vrea a fi creat din imagine.\n"
"Tipul sau poate să fie ori Gerber ori Geometrie."

#: flatcamTools/ToolImage.py:63
msgid "DPI value:"
msgstr "Val. DPI:"

#: flatcamTools/ToolImage.py:65
msgid "Specify a DPI value for the image."
msgstr "Specifica o valoare DPI pt imagine."

#: flatcamTools/ToolImage.py:72
msgid "Level of detail"
msgstr "Nivel Detaliu"

#: flatcamTools/ToolImage.py:81
msgid "Image type"
msgstr "Tip imagine"

#: flatcamTools/ToolImage.py:83
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""
"Alege o metoda de interpretare a imaginii.\n"
"B/W = imagine alb-negru\n"
"Color = imagine in culori"

#: flatcamTools/ToolImage.py:90 flatcamTools/ToolImage.py:103
#: flatcamTools/ToolImage.py:114 flatcamTools/ToolImage.py:125
msgid "Mask value"
msgstr "Val. masca"

#: flatcamTools/ToolImage.py:92
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""
"Masca pt imaginile monocrome.\n"
"Ia valori in intervalul [0 ... 255]\n"
"Decide nivelul de detalii care să fie\n"
"incluse in obiectul rezultat.\n"
"0 = nici-un detaliu\n"
"255 = include totul (ceeace ce inseamna\n"
"negru complet)."

#: flatcamTools/ToolImage.py:105
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Masca pt culoarea ROSU.\n"
"Ia valori in intervalul [0 ... 255].\n"
"Decide nivelul de detalii care să fie\n"
"incluse in obiectul rezultat."

#: flatcamTools/ToolImage.py:116
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Masca pt culoarea VERDE.\n"
"Ia valori in intervalul [0 ... 255].\n"
"Decide nivelul de detalii care să fie\n"
"incluse in obiectul rezultat."

#: flatcamTools/ToolImage.py:127
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Masca pt culoarea ALBASTRU.\n"
"Ia valori in intervalul [0 ... 255].\n"
"Decide nivelul de detalii care să fie\n"
"incluse in obiectul rezultat."

#: flatcamTools/ToolImage.py:139
msgid "Import image"
msgstr "Importa imagine"

#: flatcamTools/ToolImage.py:141
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr "Deschide o imagine tip raster și importa aceasta in FlatCAM."

#: flatcamTools/ToolImage.py:170
msgid "Image Tool"
msgstr "Unealta Imagine"

#: flatcamTools/ToolImage.py:200 flatcamTools/ToolImage.py:203
msgid "Import IMAGE"
msgstr "Importa Imagine"

#: flatcamTools/ToolMeasurement.py:26
msgid "Measurement"
msgstr "Masuratoare"

#: flatcamTools/ToolMeasurement.py:43
msgid "Units:"
msgstr "Unităti:"

#: flatcamTools/ToolMeasurement.py:44
msgid "Those are the units in which the distance is measured."
msgstr "Unitatile de masura in care se masoara distanța."

#: flatcamTools/ToolMeasurement.py:45
msgid "METRIC (mm)"
msgstr "Metric (mm)"

#: flatcamTools/ToolMeasurement.py:45
msgid "INCH (in)"
msgstr "INCH (in)"

#: flatcamTools/ToolMeasurement.py:48
msgid "Start"
msgstr "Start"

#: flatcamTools/ToolMeasurement.py:48 flatcamTools/ToolMeasurement.py:51
msgid "Coords"
msgstr "Coordonate:"

#: flatcamTools/ToolMeasurement.py:49 flatcamTools/ToolMeasurement.py:65
msgid "This is measuring Start point coordinates."
msgstr "Coordonatele punctului de Start."

#: flatcamTools/ToolMeasurement.py:51
msgid "Stop"
msgstr "Stop"

#: flatcamTools/ToolMeasurement.py:52 flatcamTools/ToolMeasurement.py:69
msgid "This is the measuring Stop point coordinates."
msgstr "Coordonatele punctului de Stop."

#: flatcamTools/ToolMeasurement.py:54
msgid "Dx:"
msgstr "Dx:"

#: flatcamTools/ToolMeasurement.py:55 flatcamTools/ToolMeasurement.py:73
msgid "This is the distance measured over the X axis."
msgstr "Distanta masurata pe axa X."

#: flatcamTools/ToolMeasurement.py:57
msgid "Dy:"
msgstr "Dy:"

#: flatcamTools/ToolMeasurement.py:58 flatcamTools/ToolMeasurement.py:77
msgid "This is the distance measured over the Y axis."
msgstr "Distanta masurata pe axa Y."

#: flatcamTools/ToolMeasurement.py:60
msgid "DISTANCE"
msgstr "DISTANTA:"

#: flatcamTools/ToolMeasurement.py:61 flatcamTools/ToolMeasurement.py:81
msgid "This is the point to point Euclidian distance."
msgstr "Distanta euclidiana de la punct la punct."

#: flatcamTools/ToolMeasurement.py:83
msgid "Measure"
msgstr "Masoara:"

#: flatcamTools/ToolMeasurement.py:131
msgid "Meas. Tool"
msgstr "Unealta Masur."

#: flatcamTools/ToolMeasurement.py:176
msgid "MEASURING: Click on the Start point ..."
msgstr "Masoara: Click pe punctul de Start ..."

#: flatcamTools/ToolMeasurement.py:269
msgid "MEASURING: Click on the Destination point ..."
msgstr "Masoara: Click pe punctul Destinaţie..."

#: flatcamTools/ToolMeasurement.py:277
#, python-brace-format
msgid "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"
msgstr "Masoara: Rrezultat D(x) = {d_x} | D(y) = {d_y} | Distanta = {d_z}"

#: flatcamTools/ToolMove.py:81
msgid "MOVE: Click on the Start point ..."
msgstr "MUTARE: Click pe punctul de Start ..."

#: flatcamTools/ToolMove.py:88
msgid "[WARNING_NOTCL] MOVE action cancelled. No object(s) to move."
msgstr ""
"[WARNING_NOTCL] Actiunea de Mutare a fost anulată. Nu sunt obiecte care să "
"fie mutate ..."

#: flatcamTools/ToolMove.py:110
msgid "MOVE: Click on the Destination point ..."
msgstr "MUTARE: Click pe punctul Destinaţie..."

#: flatcamTools/ToolMove.py:128
msgid "Moving ..."
msgstr "In mișcare ..."

#: flatcamTools/ToolMove.py:135
msgid "[WARNING_NOTCL] No object(s) selected."
msgstr "[WARNING_NOTCL] Nu sunt obiecte selectate."

#: flatcamTools/ToolMove.py:158
#, python-format
msgid "[ERROR_NOTCL] ToolMove.on_left_click() --> %s"
msgstr "[ERROR_NOTCL] ToolMove.on_left_click() --> %s"

#: flatcamTools/ToolMove.py:164
#, python-format
msgid "[success] %s object was moved ..."
msgstr "[success] Obiectul %s a fost mutat ..."

#: flatcamTools/ToolMove.py:174
msgid "[ERROR_NOTCL] ToolMove.on_left_click() --> Error when mouse left click."
msgstr ""
"[ERROR_NOTCL] ToolMove.on_left_click() --> Eroare când se face click cu "
"butonul mouse stânga."

#: flatcamTools/ToolMove.py:202
msgid "[WARNING_NOTCL] Move action cancelled."
msgstr "[WARNING_NOTCL] Actiunea de mutare a fost anulată."

#: flatcamTools/ToolMove.py:214
msgid "[WARNING_NOTCL] Object(s) not selected"
msgstr "[WARNING_NOTCL] Obiectele nu sunt selectate."

#: flatcamTools/ToolNonCopperClear.py:26
msgid "Non-Copper Clearing"
msgstr "Curățăre Non-Cu"

#: flatcamTools/ToolNonCopperClear.py:64
msgid "Gerber object to be cleared of excess copper.                        "
msgstr "Obiectul Gerber care să fie curățat de cuprul in exces."

#: flatcamTools/ToolNonCopperClear.py:74
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""
"Un număr de unelte din care algoritmul va alege\n"
"pe acelea care vor fi folosite pentru curățarea de Cu."

#: flatcamTools/ToolNonCopperClear.py:89
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"Numărul uneltei.\n"
"Curățarea de cupru va incepe cu unealta cu diametrul cel mai mare\n"
"continuand ulterior cu cele cu dia mai mic pana numai sunt unelte\n"
"sau s-a terminat procesul.\n"
"Doar uneltele care efectiv au creat geometrie vor fi prezente in obiectul\n"
"final. Aceasta deaorece unele unelte nu vor putea genera geometrie."

#: flatcamTools/ToolNonCopperClear.py:101 flatcamTools/ToolPaint.py:98
msgid ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."
msgstr ""
"Tipul uneltei (TU) poate fi::<BR>- <B>Circular</B> cu 1 ... 4 dinti -> doar "
"informativ. prin forma sa circulara, <BR>lăţimea de tăiere este tot una cu "
"diametrul sau<BR>- <B>Bila</B> -> informativ și face referire la frezele cu "
"cap rotund.<BR>- <B>V-Shape</B> -> va dezactiva parametrul >Z tăiere< "
"deoarece acesta este acum calculat și va afisa 2 noi parametri in UI: V_dia "
"și V_unghi. Ajustarea acestor parametri va modifica param. calculat >Z "
"tăiere< a.i lăţimea de tăiere in material va fi egală cu valoarea >Dia "
"unealtă< din coloana tabelei de Unelte.<BR>Alegerea tipului <B>V-Shape</B> "
"va selecta automat Tipul Operaţiei ca fiind Izolare."

#: flatcamTools/ToolNonCopperClear.py:120 flatcamTools/ToolPaint.py:117
msgid "Tool Dia"
msgstr "Dia Unealtă"

#: flatcamTools/ToolNonCopperClear.py:122
msgid "Diameter for the new tool to add in the Tool Table"
msgstr "Diametrul pentru noua unealtă care să fie adăugată in Tabela de Unelte"

#: flatcamTools/ToolNonCopperClear.py:148 flatcamTools/ToolPaint.py:145
#: flatcamTools/ToolSolderPaste.py:123
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""
"Șterge o selecţie de unelte in Tabela de Unelte,\n"
"efectuata prin selectia liniilot din Tabela de Unelte."

#: flatcamTools/ToolNonCopperClear.py:226
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"Daca este bifat foloseşte strategia de curățare tip 'rest'.\n"
"Curățarea de cupru va incepe cu unealta cu diametrul cel mai mare\n"
"continuand ulterior cu cele cu dia mai mic pana numai sunt unelte\n"
"sau s-a terminat procesul.\n"
"Doar uneltele care efectiv au creat geometrie vor fi prezente in obiectul\n"
"final. Aceasta deaorece unele unelte nu vor putea genera geometrie.\n"
"Daca nu este bifat, foloseşte algoritmul standard."

#: flatcamTools/ToolNonCopperClear.py:238
msgid "Generate Geometry"
msgstr "Genereza Geometrie"

#: flatcamTools/ToolNonCopperClear.py:486 flatcamTools/ToolPaint.py:543
#: flatcamTools/ToolSolderPaste.py:763
msgid "[WARNING_NOTCL] Please enter a tool diameter to add, in Float format."
msgstr ""
"[WARNING_NOTCL] Introduce diametrul unei unelte pt a fi adăugată, in format "
"Real."

#: flatcamTools/ToolNonCopperClear.py:515 flatcamTools/ToolPaint.py:567
msgid "[WARNING_NOTCL] Adding tool cancelled. Tool already in Tool Table."
msgstr ""
"[WARNING_NOTCL] Adăugarea unei unelte noi este anulată. Unealta există deja "
"in Tabela de Unelte."

#: flatcamTools/ToolNonCopperClear.py:520 flatcamTools/ToolPaint.py:572
msgid "[success] New tool added to Tool Table."
msgstr "[success] O noua unealtă a fost adăugată in Tabela de Unelte."

#: flatcamTools/ToolNonCopperClear.py:562 flatcamTools/ToolPaint.py:617
msgid "[success] Tool from Tool Table was edited."
msgstr "[success] O unealtă din Tabela de Unelte a fost editata."

#: flatcamTools/ToolNonCopperClear.py:573 flatcamTools/ToolPaint.py:628
#: flatcamTools/ToolSolderPaste.py:850
msgid ""
"[WARNING_NOTCL] Edit cancelled. New diameter value is already in the Tool "
"Table."
msgstr ""
"[WARNING_NOTCL] Editare eșuata. Noua valoare pt diametrul uneltei este deja "
"in Tabela de Unelte."

#: flatcamTools/ToolNonCopperClear.py:613 flatcamTools/ToolPaint.py:727
msgid "[WARNING_NOTCL] Delete failed. Select a tool to delete."
msgstr "[WARNING_NOTCL] Ștergere eșuata. Selectează o unealtă pt ștergere."

#: flatcamTools/ToolNonCopperClear.py:618 flatcamTools/ToolPaint.py:732
msgid "[success] Tool(s) deleted from Tool Table."
msgstr "[success] Au fost șterse unelte din Tabela de Unelte."

#: flatcamTools/ToolNonCopperClear.py:636 flatcamTools/ToolPaint.py:751
msgid ""
"[ERROR_NOTCL] Overlap value must be between 0 (inclusive) and 1 (exclusive), "
msgstr ""
"[ERROR_NOTCL] Valoarea de suprapunere trrebuie sa ia valori intre 0 "
"(inclusiv) si 1 (exclusiv)."

#: flatcamTools/ToolNonCopperClear.py:677
msgid "[ERROR_NOTCL] No Gerber file available."
msgstr "[ERROR_NOTCL] Nici-un fisier Gerber nu este disponibil."

#: flatcamTools/ToolNonCopperClear.py:715
#: flatcamTools/ToolNonCopperClear.py:837
msgid "Clearing Non-Copper areas."
msgstr "Se curăță PCB-ul de cuprul in exces."

#: flatcamTools/ToolNonCopperClear.py:733
#, python-format
msgid "[success] Non-Copper Clearing with ToolDia = %s started."
msgstr "[success] Curățarea de Cupru in exces cu Dia Unealtă = %s a inceput."

#: flatcamTools/ToolNonCopperClear.py:802
#, python-format
msgid "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"
msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"

#: flatcamTools/ToolNonCopperClear.py:807
msgid "[success] NCC Tool finished."
msgstr "[success] Unealta NCC s-a terminat."

#: flatcamTools/ToolNonCopperClear.py:809
msgid ""
"[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
"cleared. Check the result."
msgstr ""
"[WARNING_NOTCL] Unealta NCC a terminat lucrul dar unele zone PCB nu au putut "
"fi curățate de Cu. Verifică rezultatul."

#: flatcamTools/ToolNonCopperClear.py:855
#, python-format
msgid "[success] Non-Copper Rest Clearing with ToolDia = %s started."
msgstr "[success] Curățarea de Cupru tip Rest cu dia unealtă = %s a inceput.."

#: flatcamTools/ToolNonCopperClear.py:953
#, python-format
msgid "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"
msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"

#: flatcamTools/ToolNonCopperClear.py:961
msgid ""
"[ERROR_NOTCL] NCC Tool finished but could not clear the object with current "
"settings."
msgstr ""
"[ERROR_NOTCL] Unealta NCC a termiant lucrul dar nu a putut curăța de Cu "
"obiectul cu setările curente."

#: flatcamTools/ToolPDF.py:38
msgid "PDF Import Tool"
msgstr "Unealta import PDF"

#: flatcamTools/ToolPDF.py:152 flatcamTools/ToolPDF.py:156
msgid "Open PDF"
msgstr "Încarcă PDF"

#: flatcamTools/ToolPDF.py:159
msgid "[WARNING_NOTCL] Open PDF cancelled."
msgstr "[WARNING_NOTCL] Incărcarea fişier PDF anulată."

#: flatcamTools/ToolPDF.py:186
msgid "Parsing PDF file ..."
msgstr "Se parsează fisierul PDF ..."

#: flatcamTools/ToolPDF.py:265 flatcamTools/ToolPDF.py:338
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr "Se generează layer-ul PDF #%d ..."

#: flatcamTools/ToolPDF.py:269 flatcamTools/ToolPDF.py:342
msgid "[ERROR_NOTCL] Open PDF file failed."
msgstr "[ERROR_NOTCL] Deschiderea unui fişier PDF a eșuat."

#: flatcamTools/ToolPDF.py:274 flatcamTools/ToolPDF.py:347
#, python-format
msgid "[success] Rendered: %s"
msgstr "[success] Analizat: %s"

#: flatcamTools/ToolPaint.py:24
msgid "Paint Area"
msgstr "Unealta Paint"

#: flatcamTools/ToolPaint.py:60
msgid "Geometry:"
msgstr "Geometrie:"

#: flatcamTools/ToolPaint.py:62
msgid "Geometry object to be painted.                        "
msgstr "Obiectul tip Geometrie care să fie 'pictat'"

#: flatcamTools/ToolPaint.py:71
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""
"O suma de unelte din care algoritmul va alege pe acelea\n"
"care vor fi folosite pentru 'pictare'."

#: flatcamTools/ToolPaint.py:86
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"Numărul uneltei.\n"
"'Pictarea' va incepe cu unealta cu diametrul cel mai mare\n"
"continuand ulterior cu cele cu dia mai mic pana numai sunt unelte\n"
"sau s-a terminat procesul.\n"
"Doar uneltele care efectiv au creat geometrie vor fi prezente in obiectul\n"
"final. Aceasta deaorece unele unelte nu vor putea genera geometrie."

#: flatcamTools/ToolPaint.py:119
msgid "Diameter for the new tool."
msgstr "Diametrul pt noua unealtă."

#: flatcamTools/ToolPaint.py:224
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""
"Daca este bifat, foloste 'rest machining'.\n"
"Mai exact, se va curăța cuprul din afara traseelor,\n"
"folosind mai intai unealta cu diametrul cel mai mare\n"
"apoi folosindu-se progresiv unelte cu diametrul tot\n"
"mai mic, din cele disponibile in tabela de unelte, pt a\n"
"curăța zonele care nu s-au putut curăța cu unealta\n"
"precedenta.\n"
"Daca nu este bifat, foloseşte algoritmul standard."

#: flatcamTools/ToolPaint.py:239
msgid ""
"How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
"mouse click on the polygon to be painted.<BR>- <B>All</B>: paint all "
"polygons."
msgstr ""
"Cum să se selecteze poligoanele de 'pictat.<BR>Opțiuni:<BR>- <B>Unic</B>: "
"click mouse pe poligonul de 'pictat'.<BR>- <B>Toate</B>: 'pictează' toate "
"poligoanele."

#: flatcamTools/ToolPaint.py:254
msgid "Create Paint Geometry"
msgstr "Crează un obiect Geometrie tip 'Paint'"

#: flatcamTools/ToolPaint.py:256
msgid ""
"After clicking here, click inside<BR>the polygon you wish to be painted if "
"<B>Single</B> is selected.<BR>If <B>All</B>  is selected then the Paint will "
"start after click.<BR>A new Geometry object with the tool<BR>paths will be "
"created."
msgstr ""
"Dupa ce se apasa pe acest buton<BR>fa click pe poligonul care trebuie "
"'pictat' daca <B>Unic</B> este selectat.<BR>Daca <B>Toate</B>  este "
"selectat, operatia de 'pictare' va incepe imediat dupa click.<BR>Un nou "
"obiect Geometrie va fi creat."

#: flatcamTools/ToolPaint.py:736
msgid "geometry_on_paint_button"
msgstr "geometry_on_paint_button"

#: flatcamTools/ToolPaint.py:755 flatcamTools/ToolPaint.py:791
msgid "[WARNING_NOTCL] Click inside the desired polygon."
msgstr ""
"[WARNING_NOTCL] Click in interiorul poligonului care se dorește să fie "
"'pictat'."

#: flatcamTools/ToolPaint.py:778
msgid "[ERROR_NOTCL] Can't do Paint on MultiGeo geometries ..."
msgstr "[ERROR_NOTCL] Nu se poate face 'pictare' pe geometrii MultiGeo ..."

#: flatcamTools/ToolPaint.py:800 flatcamTools/ToolPaint.py:1004
msgid "Painting polygon..."
msgstr "Se 'pictează' un poligon..."

#: flatcamTools/ToolPaint.py:853
msgid "[WARNING] No polygon found."
msgstr "[WARNING] Nu s-a gasit nici-un poligon."

#: flatcamTools/ToolPaint.py:856
msgid "Painting polygon."
msgstr "Se 'pictează' un poligon."

#: flatcamTools/ToolPaint.py:898
msgid "[ERROR_NOTCL] Geometry could not be painted completely"
msgstr "[ERROR_NOTCL] Geometria nu a putut să fie 'pictata' complet."

#: flatcamTools/ToolPaint.py:924
#, python-format
msgid ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint\n"
"%s"
msgstr ""
"[ERROR] Nu s-a putut face operatia de 'pictare'. Incearcă o combinaţie "
"diferita de parametri. Sau o strategie diferita de 'pictare'.\n"
"%s"

#: flatcamTools/ToolPaint.py:966
#, python-format
msgid "[ERROR_NOTCL] PaintTool.paint_poly() --> %s"
msgstr "[ERROR_NOTCL] PaintTool.paint_poly() --> %s"

#: flatcamTools/ToolPaint.py:972 flatcamTools/ToolPaint.py:1271
msgid "Polygon Paint started ..."
msgstr "Paint pt poligon a inceput ..."

#: flatcamTools/ToolPaint.py:1125 flatcamTools/ToolPaint.py:1216
#, python-format
msgid ""
"[ERROR] Could not do Paint All. Try a different combination of parameters. "
"Or a different Method of paint\n"
"%s"
msgstr ""
"[ERROR] Nu s-a putut efectua op. 'Paint' pt toate poligoanele. Incearcă o "
"combinaţie diferita de parametri. Sau încearcă o alta metoda de 'pictat'\n"
"%s"

#: flatcamTools/ToolPaint.py:1149
msgid ""
"[ERROR] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"[ERROR] Nu exista nici-o Geometrie rezultata din 'pictare' in acest fişier.\n"
"De obicei inseamna că diametrul uneltei este prea mare pentru elemetele "
"geometrice.\n"
"Schimbă parametrii de 'pictare' și încearcă din nou."

#: flatcamTools/ToolPaint.py:1158
msgid "[success] Paint All Done."
msgstr "[success] 'Paint' pt toate poligoanele a fost efectuata."

#: flatcamTools/ToolPaint.py:1246
msgid ""
"[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"[ERROR_NOTCL] Nu exista o geometrie 'pictata' in acest fişier.\n"
"De obicei aceasta inseamna că diametrul uneltei este prea mare \n"
"pt a fi folosit in obiectul Geometrie de 'pictat'.\n"
"Schimbă parametrii de 'pictat' și încearcă din nou."

#: flatcamTools/ToolPaint.py:1255
msgid "[success] Paint All with Rest-Machining done."
msgstr ""
"[success] 'Paint' pentru toate poligoanele cu strategia Rest a fost "
"efectuata."

#: flatcamTools/ToolPanelize.py:25
msgid "Panelize PCB"
msgstr "Panelizează PCB"

#: flatcamTools/ToolPanelize.py:58
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specifica tipul de obiect care va fi panelizat.\n"
"Poate fi de tipul: Gerber, Excellon sau Geometrie.\n"
"Selectia facuta aici va dicta tipul de obiecte care se vor\n"
"regasi in combobox-ul >Obiect<."

#: flatcamTools/ToolPanelize.py:73
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""
"Obiectul care va fi panelizat.\n"
"Acesta va fi multiplicat intr-o arie\n"
"de linii și coloane."

#: flatcamTools/ToolPanelize.py:84
msgid "Object"
msgstr "Obiect"

#: flatcamTools/ToolPanelize.py:85
msgid "Bounding Box"
msgstr "Forma înconjurătoare::"

#: flatcamTools/ToolPanelize.py:86
msgid "<b>Penelization Reference:</b>"
msgstr "<b>Referintă panelizare:</b>"

#: flatcamTools/ToolPanelize.py:88
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""
"Alege referinta pt panelizare:\n"
"- Obiect = forma inconjurătoare a unui alt obiect\n"
"- Forma inconjurătoare = forma inconjurătoare a obiectului care tb "
"panelizat\n"
"\n"
"Referinta este utila cand se face panelizarea pt mai mult de un obiect. "
"Spatierile\n"
"(mai degraba ofsetări) vor fi aplicate avand ca referintă acest obiect de "
"referintă,\n"
"prin urmare mentinand obiectele paenlizate in sincronizare unul cu altul."

#: flatcamTools/ToolPanelize.py:113
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Tipul de obiect care va fi folosit ca și container pt panelizare.\n"
"Poate fi de tiul: Gerber sau Geometrie.\n"
"Selectia facuta aici va dicta tipul de obiecte care se vor\n"
"regasi in combobox-ul >Container<."

#: flatcamTools/ToolPanelize.py:128
msgid ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."
msgstr ""
"Obiectul care este folosit ca și container \n"
"pt obiectul care va fi panelizat."

#: flatcamTools/ToolPanelize.py:134
msgid "<b>Panel Data:</b>"
msgstr "<b>Date panel</b>"

#: flatcamTools/ToolPanelize.py:136
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""
"Aceste informatii vor determina forma panelului rezultant.\n"
"Numărul de linii si de coloane va determina cat de multe \n"
"copii ale geometriei obiectului original vor fi create.\n"
"\n"
"Spatierile sunt de fapt distante intre oricare două elemente ale \n"
"ariei panelului."

#: flatcamTools/ToolPanelize.py:183
msgid "<b>Panel Type:</b>"
msgstr "<b>Tip panel:</b>"

#: flatcamTools/ToolPanelize.py:185
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""
"Alege tipul de obiect care va fi creat pt obiectul panelizat:\n"
"- Geometrie\n"
"-Gerber"

#: flatcamTools/ToolPanelize.py:193
msgid "Constrain panel within:"
msgstr "Mentine panelul in:"

#: flatcamTools/ToolPanelize.py:227
msgid "Panelize Object"
msgstr "Panelizează obiectul"

#: flatcamTools/ToolPanelize.py:229
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""
"Se panelizează obiectul conform containerului selectat.\n"
"Cu alte cuvinte se crează copii multiple ale obiectului sursa,\n"
"aranjate intr-o arie 2D de linii și coloane."

#: flatcamTools/ToolPanelize.py:272
msgid "Panel. Tool"
msgstr "Unealta Panel"

#: flatcamTools/ToolPanelize.py:370
#, python-format
msgid "[WARNING_NOTCL]No object Box. Using instead %s"
msgstr ""
"[WARNING_NOTCL] Nu este disponibil nici-un container Box pentru obiect. Se "
"foloseşte %s"

#: flatcamTools/ToolPanelize.py:453
msgid ""
"[ERROR_NOTCL] Columns or Rows are zero value. Change them to a positive "
"integer."
msgstr ""
"[ERROR_NOTCL] Val. coloane sau linii este zero. Schimbă aceasta val. intr-un "
"număr pozitiv intreg."

#: flatcamTools/ToolPanelize.py:478 flatcamTools/ToolPanelize.py:635
msgid "Generating panel ... Please wait."
msgstr "Se generează panelul ... Va rugam asteptati!"

#: flatcamTools/ToolPanelize.py:628
msgid "[success] Panel done..."
msgstr "[success] Panel executat ..."

#: flatcamTools/ToolPanelize.py:631
#, python-brace-format
msgid ""
"[WARNING] Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"
msgstr ""
"[WARNING] Prea mare pt aria desemnata. Panelul final are {col} coloane și "
"{row} linii"

#: flatcamTools/ToolPanelize.py:640
msgid "[success] Panel created successfully."
msgstr "[success] Panel creat cu succes."

#: flatcamTools/ToolPcbWizard.py:32
msgid "PcbWizard Import Tool"
msgstr "Unealta import PcbWizard"

#: flatcamTools/ToolPcbWizard.py:40
msgid "Import 2-file Excellon"
msgstr "Importa un Excellon bi-fisier"

#: flatcamTools/ToolPcbWizard.py:57
msgid "Excellon file:"
msgstr "Fisier Excellon:"

#: flatcamTools/ToolPcbWizard.py:59
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""
"Incarcă fisierul Excellon.\n"
"De obicei are extensia .DRL."

#: flatcamTools/ToolPcbWizard.py:65
msgid "INF file:"
msgstr "Fisierul INF:"

#: flatcamTools/ToolPcbWizard.py:67
msgid "Load the INF file."
msgstr "Incarca fisierul INF."

#: flatcamTools/ToolPcbWizard.py:79
msgid "Tool Number"
msgstr "Număr unealtă:"

#: flatcamTools/ToolPcbWizard.py:81
msgid "Tool diameter in file units."
msgstr "Dimaetrul uneltei in unitătile fisierului."

#: flatcamTools/ToolPcbWizard.py:95
msgid "Int. digits:"
msgstr "Parte intreagă:"

#: flatcamTools/ToolPcbWizard.py:97
msgid "The number of digits for the integral part of the coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"intreagă a coordonatelor."

#: flatcamTools/ToolPcbWizard.py:104
msgid "Frac. digits:"
msgstr "Parte zecimală:"

#: flatcamTools/ToolPcbWizard.py:106
msgid "The number of digits for the fractional part of the coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"zecimala a coordonatelor."

#: flatcamTools/ToolPcbWizard.py:113
msgid "No Suppression"
msgstr "Fără supresie"

#: flatcamTools/ToolPcbWizard.py:114
msgid "Zeros supp.:"
msgstr "Supresie Zerouri:"

#: flatcamTools/ToolPcbWizard.py:116
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""
"Tipul de supresie de zerouri care\n"
"este folosit.\n"
"Poate fi:\n"
"- LZ = zerourile din fată sunt păstrate\n"
"- TZ = zerourile de la coadă sunt păstrate\n"
"- Fără Supresie = nu se face supresie de zerouri"

#: flatcamTools/ToolPcbWizard.py:127
msgid "Units"
msgstr "Unităti"

#: flatcamTools/ToolPcbWizard.py:129
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""
"Tipul de unităti folosite pt coordonate si\n"
"pentru diametrul uneltelor. Poate fi INCH sau MM."

#: flatcamTools/ToolPcbWizard.py:136
msgid "Import Excellon"
msgstr "Importă Excellon"

#: flatcamTools/ToolPcbWizard.py:138
msgid ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""
"Importă in FlatCAM un fisier Excellon\n"
"care isi stochează informatia in 2 fisiere.\n"
"Unul are de obicei extensia .DRL in timp\n"
"ce celălalt are extensia .INF."

#: flatcamTools/ToolPcbWizard.py:192
msgid "PCBWizard Tool"
msgstr "Unealta PCBWizard"

#: flatcamTools/ToolPcbWizard.py:286 flatcamTools/ToolPcbWizard.py:290
msgid "Load PcbWizard Excellon file"
msgstr "Incarcă un fisier Excellon tip PCBWizard"

#: flatcamTools/ToolPcbWizard.py:309 flatcamTools/ToolPcbWizard.py:313
msgid "Load PcbWizard INF file"
msgstr "Incarcă un fisier INF tip PCBWizard"

#: flatcamTools/ToolPcbWizard.py:360
msgid ""
"[ERROR] The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""
"[ERROR] Fisierul INF nu contine tabela de unelte.\n"
"Incearcă să deschizi fisierul Excellon din Fisier -> Deschide -> \n"
"Excellon si să editezi manual diametrele uneltelor."

#: flatcamTools/ToolPcbWizard.py:380
msgid "[success] PcbWizard .INF file loaded."
msgstr "[success] Fisierul .INF tip PCBWizard a fost incărcat."

#: flatcamTools/ToolPcbWizard.py:384
msgid "[success] Main PcbWizard Excellon file loaded."
msgstr "[success] Fişierul Excellon tip PCBWizard a fost incărcat."

#: flatcamTools/ToolPcbWizard.py:421
#, python-format
msgid "[ERROR_NOTCL] Cannot parse file: %s"
msgstr "[ERROR_NOTCL] Fişierul %s nu se poate parsa."

#: flatcamTools/ToolPcbWizard.py:445
msgid "Importing Excellon."
msgstr "Excellon in curs de import."

#: flatcamTools/ToolPcbWizard.py:452
msgid "[ERROR_NOTCL] Import Excellon file failed."
msgstr "[ERROR_NOTCL] Fişierul Excellon nu a putut fi importat."

#: flatcamTools/ToolPcbWizard.py:459
#, python-format
msgid "[success] Imported: %s"
msgstr "[success] Importat: %s"

#: flatcamTools/ToolPcbWizard.py:462
msgid "[WARNING_NOTCL] Excellon merging is in progress. Please wait..."
msgstr ""
"[WARNING_NOTCL] Fuziunea fisiere Excellon este in curs. Vă rugăm "
"aşteptați ..."

#: flatcamTools/ToolPcbWizard.py:464
msgid "[ERROR_NOTCL] The imported Excellon file is None."
msgstr "[ERROR_NOTCL] Fişierul Excellon importat este gol."

#: flatcamTools/ToolProperties.py:103
msgid "[ERROR_NOTCL] Properties Tool was not displayed. No object selected."
msgstr ""
"[ERROR_NOTCL] Unealta Proprietati nu a fost afișată. Nici-un obiect nu este "
"selectat."

#: flatcamTools/ToolProperties.py:110
msgid "[success] Object Properties are displayed."
msgstr "[success] Proprietatile obiectului sunt afisate in Tab-ul Unealta."

#: flatcamTools/ToolProperties.py:111
msgid "Properties Tool"
msgstr "Unealta Proprietati"

#: flatcamTools/ToolShell.py:69
msgid "...proccessing..."
msgstr "...in procesare..."

#: flatcamTools/ToolShell.py:71
#, python-format
msgid "...proccessing... [%s]"
msgstr "...in procesare... [%s]"

#: flatcamTools/ToolSolderPaste.py:37
msgid "Solder Paste Tool"
msgstr "Unealta DispensorPF"

#: flatcamTools/ToolSolderPaste.py:65
msgid "Gerber Solder paste object.                        "
msgstr "Obiect Gerber cu masca pt dispensarea de pastă de fludor."

#: flatcamTools/ToolSolderPaste.py:72
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""
"Un număr de unelte (nozzle) din care algoritmul va alege pe acelea\n"
"care vor fi folosite pentru dispensarea pastei de fludor."

#: flatcamTools/ToolSolderPaste.py:87
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""
"Numărul Uneltei.\n"
"Dispensarea de pastă de fludor va incepe cu unealta care are dia\n"
"cel mai mare și va continua pana numai sunt unelte Nozzle disponibile\n"
"sau procesul s-a terminat.\n"
"Daca numai sunt unelte dar mai sunt inca paduri neacoperite de pastă de \n"
"fludor, aplicaţia va afisa un mesaj de avertizare in Status Bar."

#: flatcamTools/ToolSolderPaste.py:94
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""
"Diametrul uneltei Nozzle. Valoarea sa (in unitati de maura curente)\n"
"este lăţimea cantiatii de pastă de fludor dispensata."

#: flatcamTools/ToolSolderPaste.py:101
msgid "New Nozzle Tool"
msgstr "Unealtă noua"

#: flatcamTools/ToolSolderPaste.py:117
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Adaugă o unealtă nou tip Nozzle in Tabela de Unelte\n"
"cu diametrul specificat mai sus,"

#: flatcamTools/ToolSolderPaste.py:129
msgid "Generate solder paste dispensing geometry."
msgstr "Generează un obiect Geometrie pt dispensarea de pastă de fludor."

#: flatcamTools/ToolSolderPaste.py:142
msgid "STEP 1:"
msgstr "PAS 1:"

#: flatcamTools/ToolSolderPaste.py:144
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."
msgstr ""
"Primul pas este să se efectueza o selecţie de unelte Nozzl pt \n"
"utilizare și apoi in mod optional, să se modifice parametrii\n"
"GCode de mai jos."

#: flatcamTools/ToolSolderPaste.py:147
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""
"Selectează unelte.\n"
"Modifica parametri."

#: flatcamTools/ToolSolderPaste.py:235
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""
"Viteza de deplasare la mișcarea pe verticala spre\n"
"poziţia de dispensare (in planul Z)."

#: flatcamTools/ToolSolderPaste.py:289
msgid "Generate GCode"
msgstr "Genereaa GCode"

#: flatcamTools/ToolSolderPaste.py:291
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Generează  GCode pt dispensarea\n"
"de pastă de fludor pe padurile PCB."

#: flatcamTools/ToolSolderPaste.py:306
msgid "STEP 2:"
msgstr "PAS 2:"

#: flatcamTools/ToolSolderPaste.py:308
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""
"Al 2-lea pas este să se creeze un obiect Geometrie pt dispensarea\n"
"de pastă de fludor, dintr-un fişier Gerber cu datele mastii de plasare\n"
"a pastei de fludor."

#: flatcamTools/ToolSolderPaste.py:324
msgid "Geo Result:"
msgstr "Rezultat Geo:"

#: flatcamTools/ToolSolderPaste.py:326
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Obiect Geometrie pt dispensare pastă de fludor.\n"
"Numele obiectului trebuie să se termine obligatoriu\n"
"in: '_solderpaste'."

#: flatcamTools/ToolSolderPaste.py:335
msgid "STEP 3:"
msgstr "PAS 3:"

#: flatcamTools/ToolSolderPaste.py:337
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""
"Al 3-lea pas este selectia unei geometrii de dispensare a pastei de fludor\n"
"urmata de generarea unui obiect tip CNCJob.\n"
"\n"
"ATENTIE: daca se dorește crearea un ui obiect CNCJob cu param. noi,\n"
"mai intai trebuie generat obiectul Geometrie cu acei parametri noi și abia\n"
"apoi se poate genera un obiect CNCJob actualizat."

#: flatcamTools/ToolSolderPaste.py:357
msgid "CNC Result:"
msgstr "Rezultat CNC:"

#: flatcamTools/ToolSolderPaste.py:359
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Obiect CNCJob pt dispensare pastă de fludor.\n"
"Pt a activa sectiunea de Salvare GCode,\n"
"numele obiectului trebuie să se termine obligatoriu in:\n"
"'_solderpaste'."

#: flatcamTools/ToolSolderPaste.py:369
msgid "View GCode"
msgstr "Vizualiz. GCode"

#: flatcamTools/ToolSolderPaste.py:371
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Vizualizează codul GCode generat pt dispensarea de \n"
"pastă de fludor pe padurile PCB-ului."

#: flatcamTools/ToolSolderPaste.py:375
msgid "Save GCode"
msgstr "Salvează GCode"

#: flatcamTools/ToolSolderPaste.py:377
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""
"Salvează codul GCode generat pt dispensare pastă de fludor\n"
"pe padurile unui PCB, intr-un fişier pe HDD."

#: flatcamTools/ToolSolderPaste.py:381
msgid "STEP 4:"
msgstr "PAS 4:"

#: flatcamTools/ToolSolderPaste.py:383
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""
"Al 4-lea pas (ultimul) este să se selecteze un obiect CNCJob realizat\n"
"dintr-un obiect Geometrie pt dispensarea de pastă de fludor, apoi \n"
"avand posibilitatea de a vizualiza continutul acestuia sau de a-l salva\n"
"intr-un fişier GCode pe HDD."

#: flatcamTools/ToolSolderPaste.py:412
msgid "Delete Object"
msgstr "Șterge Obiectul"

#: flatcamTools/ToolSolderPaste.py:792
msgid ""
"[WARNING_NOTCL] Adding Nozzle tool cancelled. Tool already in Tool Table."
msgstr ""
"[WARNING_NOTCL] Adăugarea unei unelte Nozzle a fost anulată. Unealta exista "
"deja in Tabela de Unelte."

#: flatcamTools/ToolSolderPaste.py:797
msgid "[success] New Nozzle tool added to Tool Table."
msgstr "[success] A fost adăugată o noua unealtă Nozzle in Tabela de Unelte."

#: flatcamTools/ToolSolderPaste.py:839
msgid "[success] Nozzle tool from Tool Table was edited."
msgstr "[success] Unealta Nozzle din Tabela de Unelte a fost editata."

#: flatcamTools/ToolSolderPaste.py:896
msgid "[WARNING_NOTCL] Delete failed. Select a Nozzle tool to delete."
msgstr ""
"[WARNING_NOTCL] Ștergerea a eșuat. Selectează o unealtă Nozzle pt a o șterge."

#: flatcamTools/ToolSolderPaste.py:901
msgid "[success] Nozzle tool(s) deleted from Tool Table."
msgstr "[success] Uneltele (nozzle) au fost șterse din Tabela de Unelte."

#: flatcamTools/ToolSolderPaste.py:956
msgid "[WARNING_NOTCL] No SolderPaste mask Gerber object loaded."
msgstr ""
"[WARNING_NOTCL] Nu este incărcat un obiect Gerber cu informatia mastii pt "
"pastă de fludor."

#: flatcamTools/ToolSolderPaste.py:974
msgid "Creating Solder Paste dispensing geometry."
msgstr "Se creează Geometrie pt dispensare pastă de fludor."

#: flatcamTools/ToolSolderPaste.py:986
msgid "[WARNING_NOTCL] No Nozzle tools in the tool table."
msgstr "[WARNING_NOTCL] Nu sunt unelte Nozzle in Tabela de Unelte."

#: flatcamTools/ToolSolderPaste.py:1115
msgid "[success] Solder Paste geometry generated successfully..."
msgstr ""
"[success] Obiectul Geometrie pt dispens. de pastă de fludor a fost generat "
"cu succes ..."

#: flatcamTools/ToolSolderPaste.py:1121
msgid ""
"[WARNING_NOTCL] Some or all pads have no solder due of inadequate nozzle "
"diameters..."
msgstr ""
"[WARNING_NOTCL] Cel puțin unele pad-uri nu au pastă de fludor datorita "
"diametrelor uneltelor (nozzle) ne adecvate."

#: flatcamTools/ToolSolderPaste.py:1135
msgid "Generating Solder Paste dispensing geometry..."
msgstr "Se generează Geometria de dispensare a pastei de fludor ..."

#: flatcamTools/ToolSolderPaste.py:1155
msgid "[WARNING_NOTCL] There is no Geometry object available."
msgstr "[WARNING_NOTCL] Nu exista obiect Geometrie disponibil."

#: flatcamTools/ToolSolderPaste.py:1159
msgid ""
"[WARNING_NOTCL] This Geometry can't be processed. NOT a solder_paste_tool "
"geometry."
msgstr ""
"[WARNING_NOTCL] Acest obiect Geometrie nu poate fi procesat Nu este o "
"Geometrie tip solder_paste_tool."

#: flatcamTools/ToolSolderPaste.py:1265
#, python-format
msgid "[success] ToolSolderPaste CNCjob created: %s"
msgstr "[success] Obiectul CNCJob tip solder_paste_tool a fost creat: %s"

#: flatcamTools/ToolSolderPaste.py:1297 flatcamTools/ToolSolderPaste.py:1301
#: flatcamTools/ToolSolderPaste.py:1353
msgid ""
"[WARNING_NOTCL] This CNCJob object can't be processed. NOT a "
"solder_paste_tool CNCJob object."
msgstr ""
"[WARNING_NOTCL] Acest obiect CNCJob nu poate fi procesat. Nu este un obiect "
"CNCJob tip 'solder_paste_tool'"

#: flatcamTools/ToolSolderPaste.py:1325
msgid "[ERROR_NOTCL] No Gcode in the object..."
msgstr "[ERROR_NOTCL] Nu exista cod GCode in acest obiect ..."

#: flatcamTools/ToolSolderPaste.py:1334
#, python-format
msgid "[ERROR] ToolSolderPaste.on_view_gcode() -->%s"
msgstr "[ERROR] ToolSolderPaste.on_view_gcode() -->%s"

#: flatcamTools/ToolSolderPaste.py:1363
msgid "Export GCode ..."
msgstr "Exporta GCode ..."

#: flatcamTools/ToolSolderPaste.py:1403
#, python-format
msgid "[success] Solder paste dispenser GCode file saved to: %s"
msgstr ""
"[success] Fişierul GCode pt dispensare pastă de fludor este salvat in: %s"

#: flatcamTools/ToolSub.py:55
msgid "<b>Gerber Objects</b>"
msgstr "<b>Obiect Gerber</b>"

#: flatcamTools/ToolSub.py:64 flatcamTools/ToolSub.py:110
msgid "Target:"
msgstr "Tintă:"

#: flatcamTools/ToolSub.py:66
msgid ""
"Gerber object from which to substract\n"
"the substractor Gerber object."
msgstr ""
"Obiectul Gerber din care se scade \n"
"obiectul Gerber substractor."

#: flatcamTools/ToolSub.py:78 flatcamTools/ToolSub.py:124
msgid "Substractor:"
msgstr "Substractor:"

#: flatcamTools/ToolSub.py:80
msgid ""
"Gerber object that will be substracted\n"
"from the target Gerber object."
msgstr ""
"Obiectul Gerber care se scade din \n"
"obiectul Gerber tintă."

#: flatcamTools/ToolSub.py:87
msgid "Substract Gerber"
msgstr "Execută"

#: flatcamTools/ToolSub.py:89
msgid ""
"Will remove the area occupied by the substractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""
"Va indepărta aria ocupată de obiectul \n"
"Gerber substractor din obiectul Gerber tintă.\n"
"Poate fi utilizat pt. a indepărta silkscreen-ul\n"
"care se suprapune peste soldermask."

#: flatcamTools/ToolSub.py:101
msgid "<b>Geometry Objects</b>"
msgstr "<b>Obiecte Geometrie</b>"

#: flatcamTools/ToolSub.py:112
msgid ""
"Geometry object from which to substract\n"
"the substractor Geometry object."
msgstr ""
"Obiectul Geometrie din care se scade \n"
"obiectul Geometrie substractor."

#: flatcamTools/ToolSub.py:126
msgid ""
"Geometry object that will be substracted\n"
"from the target Geometry object."
msgstr ""
"Obiectul Geometrie care se va scădea \n"
"din obiectul Geometrie tintă."

#: flatcamTools/ToolSub.py:133
msgid "Substract Geometry"
msgstr "Execută"

#: flatcamTools/ToolSub.py:135
msgid ""
"Will remove the area occupied by the substractor\n"
"Geometry from the Target Geometry."
msgstr ""
"Va indepărta aria ocupată de obiectul Geometrie \n"
"substractor din obiectul Geometrie tintă."

#: flatcamTools/ToolSub.py:216
msgid "Sub Tool"
msgstr "Unealta Scădere"

#: flatcamTools/ToolSub.py:231 flatcamTools/ToolSub.py:424
msgid "[ERROR_NOTCL] No Target object loaded."
msgstr "[ERROR_NOTCL] Nu este incărcat obiect Tintă."

#: flatcamTools/ToolSub.py:244 flatcamTools/ToolSub.py:437
msgid "[ERROR_NOTCL] No Substractor object loaded."
msgstr "[ERROR_NOTCL] Nu este incărcat obiect Substractor (scăzător)."

#: flatcamTools/ToolSub.py:297
#, python-format
msgid "Parsing aperture %s geometry ..."
msgstr "Se analizează geo pt. apertura: %s..."

#: flatcamTools/ToolSub.py:399 flatcamTools/ToolSub.py:544
msgid "Generating new object ..."
msgstr "Se generează un obiect nou ..."

#: flatcamTools/ToolSub.py:402 flatcamTools/ToolSub.py:547
msgid "[ERROR_NOTCL] Generating new object failed."
msgstr "[ERROR_NOTCL] Generarea unui nou obiect a eșuat."

#: flatcamTools/ToolSub.py:406 flatcamTools/ToolSub.py:552
#, python-format
msgid "[success] Created: %s"
msgstr "[success] Creat: %s"

#: flatcamTools/ToolSub.py:449
msgid ""
"[ERROR_NOTCL] Currently, the Substractor geometry cannot be of type Multigeo."
msgstr ""
"[ERROR_NOTCL] Momentan, obiectul substractor Geometrie nu poate fi de tip "
"Multigeo."

#: flatcamTools/ToolSub.py:494
msgid "Parsing solid_geometry ..."
msgstr "Analizează geometria solidă..."

#: flatcamTools/ToolSub.py:496
#, python-format
msgid "Parsing tool %s geometry ..."
msgstr "Analizează geo a uneltei %s ..."

#: flatcamTools/ToolTransform.py:23
msgid "Object Transform"
msgstr "Transformare Obiect"

#: flatcamTools/ToolTransform.py:84
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Roteste obiectele selectate.\n"
"Punctul de referinţă este mijlocul \n"
"formei înconjurătoare pt toate obiectele."

#: flatcamTools/ToolTransform.py:120 flatcamTools/ToolTransform.py:138
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Deformează obiectele selectate.\n"
"Punctul de referinţă este mijlocul \n"
"formei înconjurătoare pt toate obiectele."

#: flatcamTools/ToolTransform.py:176 flatcamTools/ToolTransform.py:193
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scalează obiectele selectate.\n"
"Punctul de referinţă depinde  de\n"
"starea checkbox-ului >Referința Scalare<."

#: flatcamTools/ToolTransform.py:202
msgid ""
"Scale the selected object(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scalează obiectele selectate\n"
"folosind Factor X de scalare pentru\n"
"ambele axe."

#: flatcamTools/ToolTransform.py:250 flatcamTools/ToolTransform.py:267
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""
"Deplasează obiectele selectate.\n"
"Punctul de referinţă este mijlocul formei înconjurătoare\n"
"pentru toate obiectele selectate.\n"

#: flatcamTools/ToolTransform.py:297 flatcamTools/ToolTransform.py:305
msgid ""
"Flip the selected object(s) over the X axis.\n"
"Does not create a new object.\n"
" "
msgstr ""
"Oglindește obiectele selectate pe axa X.\n"
"Nu crează un obiect nou."

#: flatcamTools/ToolTransform.py:636
msgid "[WARNING_NOTCL] No object selected. Please Select an object to rotate!"
msgstr ""
"[WARNING_NOTCL] Nici-un obiect nu este selectat. Selectează un obiect pentru "
"a fi Rotit!"

#: flatcamTools/ToolTransform.py:664
msgid "CNCJob objects can't be rotated."
msgstr "Obiectele tip CNCJob nu pot fi Rotite."

#: flatcamTools/ToolTransform.py:672
msgid "[success] Rotate done ..."
msgstr "[success] Rotaţie executată ..."

#: flatcamTools/ToolTransform.py:687
msgid "[WARNING_NOTCL] No object selected. Please Select an object to flip!"
msgstr ""
"[WARNING_NOTCL] Nici-un obiect nu este selectat. Selectează un obiect pentru "
"a fi Oglindit!"

#: flatcamTools/ToolTransform.py:722
msgid "CNCJob objects can't be mirrored/flipped."
msgstr "Obiectele tip CNCJob nu pot fi Oglindite."

#: flatcamTools/ToolTransform.py:756
msgid ""
"[WARNING_NOTCL] No object selected. Please Select an object to shear/skew!"
msgstr ""
"[WARNING_NOTCL] Nici-un obiect nu este selectat. Selectează un obiect pentru "
"a fi Deformat!"

#: flatcamTools/ToolTransform.py:778
msgid "CNCJob objects can't be skewed."
msgstr "Obiectele tip CNCJob nu pot fi deformate."

#: flatcamTools/ToolTransform.py:805
msgid "[WARNING_NOTCL] No object selected. Please Select an object to scale!"
msgstr ""
"[WARNING_NOTCL] Nici-un obiect nu este selectat. Selectează un obiect pentru "
"a fi Scalat!"

#: flatcamTools/ToolTransform.py:838
msgid "CNCJob objects can't be scaled."
msgstr "Obiectele tip CNCJob nu pot fi scalate."

#: flatcamTools/ToolTransform.py:857
msgid "[WARNING_NOTCL] No object selected. Please Select an object to offset!"
msgstr ""
"[WARNING_NOTCL] Nici-un obiect nu este selectat. Selectează un obiect pentru "
"a fi Deplasat!"

#: flatcamTools/ToolTransform.py:866
msgid "CNCJob objects can't be offseted."
msgstr "Obiectele tip CNCJob nu pot fi deplasate."

#~ msgid "Tool dia:                   "
#~ msgstr "Dia Unealtă:"

#~ msgid ""
#~ "The diameter of the cutting\n"
#~ "tool.."
#~ msgstr "Diametrul uneltei taietoare ..."

#~ msgid "Disable"
#~ msgstr "Dezactivează"

#~ msgid "[WARNING_NOTCL] Move cancelled. No shape selected."
#~ msgstr "[WARNING_NOTCL] Mutare anulata. Nici-o forma nu este selectată."

#~ msgid "Click on the Destination point..."
#~ msgstr "Click pe punctul de Destinaţie ..."

#~ msgid "Copy as &Geom"
#~ msgstr "Copiază ca &Geo"

#~ msgid "Ap. Scale Factor:"
#~ msgstr "Factor scalare ap.:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Schimbă dimensiunea aperturilor selectate.\n"
#~ "Factor cu care se multiplica geometriile\n"
#~ "acestui obiect."

#~ msgid "Ap. Buffer Factor:"
#~ msgstr "Factor bufer ap.:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Schimbă dimensiunea aperturilor selectate.\n"
#~ "Valoare cu care se mareste/micsorează\n"
#~ "geometriile acestui obiect."

#~ msgid "[WARNING]No object Box. Using instead %s"
#~ msgstr "[WARNING] Nu exista container. Se foloseşte in schimb %s"

#~ msgid "Path"
#~ msgstr "Pe cale"

#~ msgid "In"
#~ msgstr "În"

#~ msgid "Out"
#~ msgstr "Afară"

#~ msgid "Custom"
#~ msgstr "Personalizat"

#~ msgid "Copy Drill(s)"
#~ msgstr "Copiaza Găurire"

#~ msgid "CTRL"
#~ msgstr "CTRL"

#~ msgid "SHIFT"
#~ msgstr "SHIFT"

#~ msgid "Both"
#~ msgstr "Ambele"

#~ msgid "Pos"
#~ msgstr "Pozitiv"

#~ msgid "Neg"
#~ msgstr "Negativ"

#~ msgid "Solid   "
#~ msgstr "Solid"

#~ msgid "M-Color   "
#~ msgstr "M-Color   "

#~ msgid "Done."
#~ msgstr "Executat."

#~ msgid "Click on CENTER ..."
#~ msgstr "Click in Centru ..."

#~ msgid "[success] Done. Region completed."
#~ msgstr "[success] Executat. Adăugarea unei Regiuni terminată."

#~ msgid "Add an aperture to the aperture list"
#~ msgstr "Adaugă o apertură in lista de aperturi"

#~ msgid "Del Aperture:"
#~ msgstr "Șterge apertura:"

#~ msgid ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."
#~ msgstr ""
#~ "Sterge o apertură in lista de aperturi.\n"
#~ "Va sterge si geometriile asociate."

#~ msgid ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."
#~ msgstr ""
#~ "[ERROR_NOTCL] Factorul de scalare a aperturii lipseste sau este in format "
#~ "gresit."

#~ msgid "[ERROR_NOTCL] The aperture buffer value is missing or wrong format."
#~ msgstr "[ERROR_NOTCL] Valoarea pt bufer apertura lipseste "

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">EDITORUL DE GEOMETRII</"
#~ "span></strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Desenează un Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Bufer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copiaza o geometrie</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Intersecţie Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Paint</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Sari la Locaţie (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Comuta lipire colt</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Muta forma geometrică</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Desenează un Poligon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Desenează un Cerc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Desenează o Cale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Desenează un Patrulater</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Substracţie Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de adaugare Text</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Uniune Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Oglindește forma geo pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Oglindește forma geo pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Deformează forma geo pe axa X/td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Deformează forma geo pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Trasformări din Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Deplasează forma geo pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Deplasează forma geo pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Masurare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Salvează obiectul și ieși din Editor</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de tăiere Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Roteste forma geometrică</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Termina desenatul pentru anumite "
#~ "unelte</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Renunta și intoarce-te la Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Șterge forma geometrică</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EDITORUL EXCELLON</"
#~ "span></strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Adaugă o arie de găuriri</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copiaza Găuriri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Adaugă găurire</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Sari la Locaţie (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Muta Găuriri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Redimensionează găuriri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Adaugă o noua Unealta</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Șterge Găuriri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternatic: Șterge Unelte</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Renunta și intoarce-te la Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Salvează obiectul și ieși din Editor</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "Save && Close Edit"
#~ msgstr "Salvează && Inchide Edit"

#~ msgid "[success] GUI settings deleted ..."
#~ msgstr "[success] Setarile GUI au fost șterse ..."

#~ msgid "Scale Factor:"
#~ msgstr "Factor scalare:"

#~ msgid "Perform scaling operation on the selected apertures."
#~ msgstr "Efectuează operatia de scalare pt aperturile selectate."

#~ msgid "Buffer Factor:"
#~ msgstr "Factor bufer:"

#~ msgid "Perform buffer operation on the selected apertures."
#~ msgstr "Efectuează operatia de bufer pt aperturile selectate."

#~ msgid "<b>Generate new Gerber Object:</b>"
#~ msgstr "<b>Crează un nou obiect Gerber::</b>"

#~ msgid "Will generate a new Gerber object from the changed apertures."
#~ msgstr "Va crea un nou obiect tip Gerber din aperturile modificate."

#~ msgid ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."
#~ msgstr ""
#~ "Va genera un nou obiect Gerber din aperturile modificate.\n"
#~ "Acest nou obiect poate fi izolat etc."

#~ msgid "[ERROR_NOTCL]Could not load defaults file."
#~ msgstr ""
#~ "[ERROR_NOTCL] Nu a fost posibila incarcarea fişierului cu valori default."

#~ msgid "[ERROR_NOTCL] Failed to parse project file: %s"
#~ msgstr "[ERROR_NOTCL] Esec in incarcarea fişierului de configurare: %s"

#~ msgid "[ERROR_NOTCL]Wrong value format entered, use a number."
#~ msgstr "[ERROR_NOTCL] Valoare in format incorect, foloseşte un număr."

#~ msgid "[ERROR_NOTCL]Cancelled. Empty file, it has no geometry..."
#~ msgstr "[ERROR_NOTCL] Anulat. Fişier gol, nu are geometrie ..."

#~ msgid "[WARNING_NOTCL]Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL] Exportul de cod CNC a fost anulat ..."

#~ msgid "[success]Flip on the Y axis done ..."
#~ msgstr "[success] Oglindire pe axa Y executată ..."

#~ msgid "[success]Flip on the X axis done ..."
#~ msgstr "[success] Oglindire pe axa X executată ..."

#~ msgid "[success]Skew on the %s axis done ..."
#~ msgstr "[success] Oglindire pe axa %s executată ..."

#~ msgid "[success]Offset on the %s axis done ..."
#~ msgstr "[success] Deplasarea de axa %s executată."

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "Cat de mult (fractie) din diametrul uneltei sa se suprapuna la fiecare "
#~ "trecere a uneltei.\n"
#~ "Exemplu:\n"
#~ "O valoare aici de 0.25 inseamna 25\\% din diametrul uneltei de mai sus.\n"
#~ "\n"
#~ "Ajusteaza valoarea incepand de la valori mici si pe urma creste daca "
#~ "ariile care ar trebui\n"
#~ " >pictate< inca nu sunt procesate.\n"
#~ "Valori scazute = procesare rapida,executie rapida a PCB-ului.\n"
#~ "Valori mari= procesare lenta cat si o executie la fel de lenta a PCB-"
#~ "ului,\n"
#~ "datorita numarului mai mare de treceri-taiere."

#, fuzzy
#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_cut = Z coord for Toolchange"
#~ msgstr "z_toolchange = Z coord for Toolchange"

#, fuzzy
#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_toolchange = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Proiect_%s"

#~ msgid "tool_tab"
#~ msgstr "tool_tab"
